Shields Marine Hose by Anthea Webb

SHIELDS

SHIELDS CODE NUMBERS

All Shields Marine Hoses are identified by a 9 digit code number. The first two digits — 16 - identify the product as a Shields Hose:

Example: 16-120-0580

16 - Shields Hose The second three digits identify the type of hose:

Example: 16-120-0580

120 - Bilgeflex The third three digits identify the size of the hose:

1 — 2 — 3 — 4 — 5 — 6 — 7 — 8 — 0 — 0-xx —

6' or 6 1/4' Length 9' Length 10' Length 12 1/2' Length 25' Length 50' Length 100' Length 75' Length Standard Bulk Pack Special Bulk Length

Identifies the package quantity

Identifies the size of the hose

Example: 16-120-0580

Identifies the type of hose

058 - 5/8" The last digit identifies the package quantity as follows:

Identifies the product as a Shields Hose

Example: 16-120-0580

16-120-0580

Example:

0-36 — 3' Length 47

SHIELDS

SHIELDS HOSE Product Application Guide

PRODUCT APPLICATION GUIDE KEY

Cold

EX EX EX X X N/A X X

PG. NO. SIZE RANGE

G G N/A C EX EX X EX

Flexibility

EX EX G X X N/A X X

Water Tank Vent

EX EX EX G N/A N/A X C

Drain Lines To Sump or Above Water Line

Drain Lines Below Water Line

/4" - 1 1/2" /8" - 1 1/2" 3 /8" - 3/4" 3 /16" - 1 1/2" 5 /8" - 1 1/2" 1 1/4" - 1 1/2" 5 /8" - 1 1/2" 5 /8" - 3" 1

EX G G X EX C EX X

EX G G G EX EX EX EX

EX G G G EX N/A C C

2 2 3 3 2 1 2 1

APPLICATION

SANITATION SYSTEM

Toilet Water Inlet

Holding Tank Vent

Flexibility

NAME

55 55 55 54 53 52 52 51

Holding Tank to Overboard Discharge

SERIES NO.

Heavy Duty Reinforced PVC Tubing All Clear Reinforced PVC — Red Tracer Clear White Reinforced PVC — Blue Tracer PVC Tubing — Clear Shields Vac Extra Heavy Duty Shields Vac with FDA Liner Shields Livewell Hose Shields Multiflex

Holding Tank Pump Out

Series 168 Series 162 Series 164 Series 150 Series 148 Series 145 Series 149 Series 141

APPLICATION Pressurized Supply

Toilet to Holding Tank

Not available in size range Can easily be bent into tight radius Can be bent into gradual radius May kink in applications requiring bend radius

PG. NO. SIZE RANGE

FRESH WATER SYSTEM/POTABLE

NAME

NA — 1 — 2 — 3 —

Hot

SERIES NO.

Water Tank Fill

Designed to give excellent service Designed to give good service in normal applications Product can give good service with proper installation, may not be suitable in all applications. Not recommended

Non-Pressurized Supply

EX — G — C — X —

Series 105

Poly X Sanitation Hose

1" & 1 1/2"

N/A

Series 250

Shieldsflex II

Series 101

Shields Sanitation Hose

N/A

Series 144

Super PVC Sanitation

Series 148

Shields Vac Extra Heavy Duty

Series 146

Shields Vac Extra Heavy Duty/Industrial

Series 168

Heavy Duty Reinforced PVC/White Tracer

/2" - 8" 1" & 1 1/2" 1" & 1 1/2" 5 /8" - 1 1/2" 5 /8" - 3" 1 /4" - 1 1/2" 3 /8" - 1 1/2" 5 /8" - 1 1/2"

Series 162

All Clear Reinforced PVC — Red Tracer

Series 149

Shields Livewell

N/A

G/EX

Product Application Guide

Corrugated Nautiflex

Silicone Exhaust Hose

Series 202

Nautiflex Silicone Exhaust Hose

1" - 14"

Series 250

Shieldsflex II

Series 200

Marine Exhaust

Series 130

#1300 Heater Hose

Series 135

#1350 H.D. Water Hose

Series 160

#1600 Water Hose

Flexibility

APPLICATION

Severe Bend

SIZE RANGE

Require Moderate Bend

PG. NO.

Straight Pipe Connector More than 4 x I.D. of Hose

NAME

/2" - 8" 1 /2" - 14" 1 /2" - 3/4" 1 /2" - 1" 1 /4" - 1 1/4"

Silicone Exhaust Hose

Series 202

Nautiflex Silicone Exhaust Hose

1" - 14"

Series 200

Shields Marine Exhaust

Series 250

Shieldsflex II

Series 252

Shieldsaust - C

/2" - 14" 1 /2" - 8" 3 /4" - 8"

Various

Hump Hose & Elbows

SIZE RANGE

FUEL SYSTEM

Series 331 Series 309 Series 351 Series 350 Series 365 Series 355 Series 315 Series 368

Silverado 3000 Oil Tank Fill Hose Shields FIRE-ACOL-C Shields FIRE-ACOL Shields FIRE-ACOL-15 Shields Fuel Fill Shields 315 - Silverado 2000 Shields Low Permeation Marine Fuel Hose

64 64 63 63 62 63 64 62

5 /16" - 3/8" 1 1/2" 1 1/2" 1 5/8" - 2 3/8" 1 /4" - 1/2" 1 1/2" - 2" 1 /4" - 5/8" 1 /4" - 1/2"

Series 369

Shields FIRE-ACOL Fuel Vent Hose

N/A N/A N/A N/A N/A N/A EX N/A

2 1 1 1 1 1 2 1

PG. NO.

/8"

N/A

SIZE RANGE

APPLICATION Livewell Drain Below Water Line

Flexibility

Shields Vac Extra Heavy Duty

N/A N/A N/A N/A N/A N/A C N/A

Livewell Drain Above Water Line

BILGE/LIVEWELL

Series 148

EX N/A N/A N/A EX N/A EX EX

Livewell Inlet

X N/A N/A N/A EX N/A X EX

Hand Bilge Pump

NAME

N/A X EX EX N/A EX N/A N/A

Submersible Bilge Pump

SERIES NO.

N/A EX EX EX N/A EX N/A N/A

Oil Tank Fill

APPLICATION Fuel Tank Vent Outboard

PG. NO.

See our selection for straight or angled connections

Fuel Tank Vent Inboard

NAME

2"-10"

Fuel Feed Outboard

SERIES NO.

59-60

/4" - 16"

Fuel Feed Inboard/Outdrive

Corrugated Nautiflex

Fuel Tank Fill

Series 262

/8" - 1 1/2" /8" - 1 1/2"

/8" - 3" /8" - 3" 3 /4" - 1 1/2" 3 /4" - 1 1/8" 5 /8" - 1 1/2"

Series 149 Series 146

Shields Livewell Hose Shields Vac Extra Heavy

Remote Bilge Pump

WET EXHAUST SYSTEM

Straight Pipe Connector Less than 4 x I.D. of Hose

SERIES NO.

/4" - 16"

Flexibility

Series 262

Flexibility

ENGINE HOSE

Exhaust Water Injection

APPLICATION Engine Coolant Hose Severe Bend

SIZE RANGE

Engine Coolant Hose Straight or Limited Bend

PG. NO.

Generator Intake

NAME

Engine Intake

SERIES NO.

Duty/Commercial Grade

Series 141

Shields Multiflex

Series 140

Shields Vac Std. w/cuffs

Series 123

Shields Bilgevac

Series 120

Shields Bilgeflex

SHIELDS

SHIELDS HOSE

SHIELDS

SHIELDS HOSE

Engine/Coolant/Bilge

WATER/HEATER HOSE

SHIELDS #1300 WATERHOSE Working Bulk Pack I.D. mm O.D. mm Pressure Wt. "C" Code # m

1/2" 12.7 .736 18.69 62 PSI 5/8" 15.9 .878 22.3 62 PSI 3/4" 19.1 1.003 25.48 50 PSI

17 21 26

Bulk Pack 50' (15.2m) R/O Ctn. Code #

16-130-0120 (500' reel) 152.4 16-130-0126 — 16-130-0580 (500' reel) 152.4 16-130-0586 16-130-0585 16-130-0340 (500' reel) 152.4 16-130-0346 16-130-0345 • Engine Heater Hose, Heat Exchanger, A/C Circulation

SHIELDS #1350 HEAVY DUTY WATERHOSE

Working

Wt. Bulk Pack

I.D.

Pressure

"C"

1/2" 5/8" 3/4" 1"

12.7 15.9 19.1 25.4

200 PSI 200 PSI 200 PSI 150 PSI

19 26 33 52

O.D.

.811 20.6 .968 24.59 1.118 28.4 1.441 36.6

Code #

16-135-0120 (550' reel) 167.6 16-135-0580 (450' reel) 137.2 16-135-0340 (400' reel) 121.9 16-135-1000 (300' reel) 91.4

Dist. Pkg. 50' (15.2m) R/O Ctn. Code #

16-135-0126 16-135-0586 16-135-0346 16-135-1006

SHIELDS #1600 WATER/HEATER HOSE

I.D.

O.D.

/4" 6.4 .527 3/8" 9.5 .7 1/2" 12.7 .838 5/8" 15.9 1 3/4" 19.1 1.133 1

Bulk Pack

Dist. Pkg. 50' (15.2m)

Working

Wt.

Pressure

"C"

Code #

R/O Ctn. Code #

250 PSI 250 PSI 250 PSI 250 PSI 250 PSI 200 PSI 200 PSI

10 17 22 28 34 52 62

16-160-0140 (500' reel) 16-160-0380 (500' reel) 16-160-0120 (450' reel) 16-160-0580 (400' reel) 16-160-0340 (300' reel) 16-160-1000 (250' reel) 16-160-1140 (200' reel)

152.4 152.4 137.2 121.9 91.4 76.2 61.0

16-160-0146 16-160-0386 16-160-0126 16-160-0586 16-160-0346 16-160-1006 16-160-1146

13.4 17.8 21.3 25.4 28.8 1" 25.4 1.448 36.8 1 1/4" 31.8 1.75 44.5

Dist. Pkg. 25' (7.6m) R/O Ctn. Code #

• Drain Lines – Sink, Icebox, Shower, Livewell • Toilet Intake – Heavy Duty Only EPDM tube and cover, fabric reinforced. Resistant to: mild chemicals, heat, cold, ozone, saltwater. Temperature range: -40°F to +190°F

• For Critical Water Connections • Heat Exchanger, Toilet Intake, Small Engine Intake, Bilge Pump Intake/ Discharge • Below Water Line Drains And Scuppers EPDM tube and cover, fabric reinforced, good bend radius. Resistant to: mild chemicals, heat, cold, ozone, salt water. Temperature range: -40°F to +190°F

• Bilge Pump Discharge Single layer corrugated polyethylene. Resistant to: mild chemicals, salt water. Clamping cuff every foot. Available in black or white (Add B or W suffix to specify color) Do not attach to thru hull fitting below the water line

SHIELDS BILGEFLEX Bend Vac Wt. Bulk I.D. mm Radius mm Rating "C" Code # Pack m

/8" /4" 1 1 /8" 1 1/4" 1 1/2"

5 3

15.9 1/2" 19.1 3/4" 28.6 1" 31.8 1 1/2" 38.1 2"

12.7 19.1 25.4 38.1 50.8

20 20 20 20 20

5 6 7 10 13

16-120-0580 16-120-0340 16-120-1180 16-120-1140 16-120-1120

600' 500' 300' 200' 150'

182.9 152.4 91.4 61.0 45.7

50' (15.2m) R/O Ctn. Code #

16-120-0586 16-120-0346 16-120-1186 16-120-1146 16-120-1126

Dist. Pkg. 9' (2.7M) Polypac Code #

6' (1.8M) Polypac 25' (7.6M) Code # R/O Ctn.

16-120-0582 16-120-0581 — 16-120-0342 16-120-0341 — 16-120-1182 16-120-1181 — — — — — — 16-120-1125

Bilge/Drain

SHIELDS BILGEVAC

I.D.

3/4" 19.1 1 1/8" 28.6

Bend

Radius mm

2" 50.8 3" 76.2

Wt. "C"

8 16

• Bilge Pump Discharge • Drains – Sink, Shower, Scupper, Livewell

Bulk Pack 100' (30.5m)

Dist. Pkg. 50' (15.2m)

Coil Code #

R/O Ctn. Code #

16-123-0340 16-123-0346 16-123-1180 16-123-1186

Black PVC with flexible vinyl helix. Flexible, abrasion resistant. Resistant to: mild chemicals, salt water. Do not attach to thru hull fitting below the water line.

• Bilge Pump Intake & Discharge • Diaphragm Style Hand Operated Bilge Pump Intake And Discharge

SHIELDS VAC STANDARD Bend Vac Wt. Bulk Pack I.D. mm Radius mm Rating "C" Code #

✱ 3/4" 19.1 1 1/4" 31.8 1 1/2" 38.1

/8" 9.5 28 /4" 19.1 28 3 /4" 19.1 28 3

Dist. Pkg. 50' (15.2m) R/O Ctn. Code #

PVC supported by vinyl covered steel wire – very flexible. 8 16-140-0340 ➀ 16-140-0346 Nylon reinforced – 1 1/4" & 1 1/2" only. Resistant to: mild 19 16-140-1140 ➁ 16-140-1146 23 16-140-1120 ➁ 16-140-1126 chemicals, salt water. Coupling: uses 142 left hand thread cuffs.

✱ Not reinforced with nylon ➀ 4 x 50' per box ➁ 2 x 50' per box

Do not attach to thru hull fitting below the water line.

SHIELDS MULTIFLEX Bend Wt. I.D. mm Radius mm "C"

5/8" 3 /4" 1" 1 1/8" 1 1/4" 1 1/2"

15.9 1/2" 19.1 3/4" 25.4 7/8" 28.6 1" 31.8 1 1/2" 38.1 2"

12.7 19.1 22.2 25.4 38.1 50.8

8 10 13 16 19 24

Bulk Pack 100' (30.5m) Coil Code #

Dist. Pkg. 50' (15.2m) R/O Ctn. Code #

• Bilge Pump Discharge

16-141-0580B 16-141-0340B 16-141-1000B 16-141-1180B 16-141-1140B 16-141-1120B

16-141-0586B 16-141-0346B 16-141-1006B 16-141-1186B 16-141-1146B 16-141-1126B

• Potable Water Tank Fill

2" 50.8 3" 76.2 1 1/2" 38.1

5" 8" 2"

• Drains – Sink, Shower, Scupper

10' (3.1m) Length

127.0 34 16-141-2000B 16-141-2003B 203.2 54 16-141-3000B 16-141-3003B 50.8 24 16-141-1120W 16-141-1123W

• Drains – Sink, Shower, Scupper, Livewell Clear FDA formula PVC with black vinyl helix. Flexible, abrasion resistant. Resistant to: mild chemicals, salt water. Couplings: uses 147 right hand thread cuffs. Do not use glycol based antifreeze in hose. Do not attach to thru hull fitting below the water line.

SHIELDS

SHIELDS HOSE

SHIELDS

SHIELDS HOSE

Bilge/Drain/Potable/Livewell/Sanitation SHIELDS VAC WITH FDA LINER • Diaphragm Style Hand Operated Bilge Pump Intake And Discharge • Drains – Sink, Shower, Scupper • Potable Water Tank Fill PVC supported by vinyl covered steel wire – very flexible FDA formula liner. Resistant to: mild chemicals, salt water. Bend Vac Wt. I.D.

Do not use glycol based antifreeze in hose.

mm Radius mm Rating “C”

1 1/4" 31.8 Do not attach to thru hull fitting below the water line

/4" 19.1 20

Bulk Pack Dist. Pkg. 2 x 50' (15.2m) 50' (15.2m) 10' (3.1m) Code # R/O Ctn. Code # Polypac Code #

22 16-145-1140 16-145-1146 16-145-1143

SHIELDS VAC CUFFS

SHIELDS VAC H.D. CUFFS

Provide added clamping protection for Shields vac hose. For watertight seal apply with sealing compound. Left-hand thread. Use with Series 140 and 145.

Provide added clamping protection for Shields vac hose. For watertight seal apply with sealing compound. Right-hand thread. Use with Series 141.

Size 3 /4" 1" 1 1/4" 1 1/2"

mm 19.1 25.4 31.8 38.1

Wt. “C” 6.5 8.5 12.5 13.0

Code No. 16-142-0340 16-142-1000 16-142-1140 16-142-1120

Size 3 /4" 1 1/2"

mm 19.1 38.1

Wt. “C” 6.5 13.0

Code No. 16-147-0340 16-147-1120

SHIELDS VAC EXTRA HEAVY DUTY/INDUSTRIAL GRADE • Bilge Pump Intake And Discharge • Drains – Sink, Shower, Scupper • Potable Water Tank Fill • Livewell Intake And Drain • Sanitation – Intake, Vent, Pump Out Smooth cover clear FDA formula PVC with white vinyl helix. Rated for full vacuum. Resistant to: mild chemicals, salt water. Do not use glycol based antifreeze in hose. For below waterline connections.

Bend Vac Wt. I.D. mm Radius mm Rating “C”

5/8" 3/4" 1" 1 1/8" 1 1/4" 1 1/2" 2" 2 1/2" 3"

15.9 19.1 25.4 28.6 31.8 38.1 50.8 63.5 76.2

3 3 3 4 3 4 5 7 9

76.2 76.2 76.2 101.6 76.2 101.6 127.0 177.8 228.6

28 28 28 28 28 28 28 28 28

Bulk Pack Dist. Pkg. 100' (30.5m) 50' (15.2m) 10' (3.1m) Coil Code # R/O Ctn. Code # Length Code #

15 16-146-0580 16 16-146-0340 27 16-146-1000 25 16-146-1180 30 16-146-1140 40 16-146-1120 57 16-146-2000 74 16-146-2120 94 16-146-3000

16-146-0586 — 16-146-0346 — 16-146-1006 — 16-146-1186 — 16-146-1146 — 16-146-1126 — — 16-146-2003 — 16-146-2123 — 16-146-3003

Do not use in pressurized water systems.

SHIELDS LIVEWELL HOSE • • • •

Livewell Intake And Drain Bilge Pump Intake And Discharge Drains – Sink, Shower, Scupper Sanitation – Intake, Vent

Black smooth cover with vinyl helix. Rated for full vacuum. Resistant to: mild chemicals, salt water. Do not use glycol based antifreeze in hose. For below waterline connections.

I.D. mm

5/8" 3/4" 1" 1 1/8" 1 1/4" 1 1/2"

15.9 19.1 25.4 28.6 31.8 38.1

Bend Radius mm

3 3 3 4 4 5

76.2 76.2 76.2 101.6 101.6 127.0

Vac Rating

Wt. “C”

Bulk Pack 100' (30.5m) Coil Code #

Dist. Pkg. 50' (15.2m) R/O Ctn. Code #

28 28 28 28 28 28

15 16 24 25 28 39

16-149-0580 16-149-0340 16-149-1000 16-149-1180 16-149-1140 16-149-1120

16-149-0586 16-149-0346 16-149-1006 16-149-1186 16-149-1146 16-149-1126

Livewell/Sanitation/Bilge/Drain/Potable SHIELDS SUPER PVC SANITATION HOSE • • • •

Bend Vac Wt. I.D. mm Radius mm Rating “C”

1" 25.4 1 1/2" 38.1

3 5

76.2 28 127.3 28

Bulk Pack 100' (30.5m) Coil Code #

Toilet To Holding Tank - Self-Draining Lines Holding Tank Pump Out Superior Resistance To Odor Permeation 5 Year Limited Warranty

Smooth off white PVC with vinyl helix. Contains anti fungus agent to control odor. Resistant to: mild chemicals, salt water, permeation.

Dist. Pkg. 50' (15.2m) R/O Ctn. Code #

Do not use glycol based antifreeze in hose.

27 16-144-1000 16-144-1006 40 16-144-1120 16-144-1126

Do not use for potable water.

• Toilet To Holding Tank - Self-Draining Lines, Intake, Vent, Pump Out • Bilge Pump Intake And Discharge • Resistant To Odor Permeation • Drains – Sink, Shower, Scupper • Potable Water Tank Fill • Livewell Intake And Drain

SHIELDS VAC EXTRA HEAVY DUTY/FDA

Smooth white FDA grade PVC with vinyl helix. Rated for full vacuum. Resistant to: mild chemicals, salt water, permeation. Do not use glycol based antifreeze in hose. Do not use in pressurized water systems. Bend Vac Wt. I.D. mm Radius mm Rating “C”

5/8" 3/4" 1" 1 1/8" 1 1/4" 1 1/2"

15.9 19.1 25.4 28.6 31.8 38.1

3 3 3 4 4 5

76.2 76.2 76.2 101.6 101.6 127.0

28 28 28 28 28 28

15 20 27 29 31 40

Bulk Pack 100' (30.5m) Coil Code #

Dist. Pkg. 50' (15.2m) R/O Ctn. Code #

25' (7.6m) R/O Ctn. Code #

16-148-0580W 16-148-0340W 16-148-1000W 16-148-1180W 16-148-1140W 16-148-1120W

16-148-0586W 16-148-0346W 16-148-1006W 16-148-1186W 16-148-1146W 16-148-1126W

— — — — — 16-148-1125W

SHIELDS SANITATION HOSE

• Toilet To Holding Tank • Holding Tank Pump Out • Maximum Resistance To Odor Permeation EPDM tube & cover, wire reinforced, two fabric plies. Kink resistant and flexible. Resistant to: toilet chemicals, odor permeation, ozone, salt water, heat.

I.D.

O.D.

1" 1 1/2"

25 38

1 5/16" 1 55/64"

Burst

Wt.

Bulk Pack 50' (15.2m)

Dist. Pkg. 12 1/2' (3.8m)

25" (7.6mm)

Ply

Pressure

“C”

Coil Code #

Length Code #

Coil Code #

2 2

200# 150#

38 55

16-101-1000 16-101-1120

16-101-1004 16-101-1124

— 16-101-1125

WARNING: Lines containing raw sewage should be plumbed to be self-draining.

SHIELDS

SHIELDS HOSE

SHIELDS

SHIELDS HOSE

Drain/Potable/Sanitation

SHIELDS POLY X SANITATION HOSE

I.D.

O.D.

50' (15.2m)

12 1/2' (3.8m)

10' (3.1m)

Ply Rating “C”

coil Code #

lgth Code #

Box Code #

1" 25 1 21/64" 33.7 2 1 1 /2" 38 1 27/32" 46.8 2

Vac

28 28

51 16-105-1000 16-105-1004 16-105-1003BX 74 16-105-1120 16-105-1124 16-105-1123BX

The ultimate sanitation hose - Lifetime warranty against odor permeation. Combines the flexibility of a rubber hose with the ultimate permeation resistance of Polyurethane. Poly X can easily be slipped over most fittings. Polyurethane cover is very abrasion resistant. Glossy cover for easy clean up. • Head to holding tank • Holding tank pump out Construction: Tube: smooth, white NEOPRENE, chemicals and detergent resistant Reinforcement: 2 textile fabric plies with one steel wire Cover: smooth,POLYURETHANE,heat, weather, ozone and abrasion resistant, glossy cover

SANITATION HOSE FITTINGS Style Straight Male Straight Male Straight Male Straight Male Straight Male Straight Female 90 Degree Male 90 Degree Female Hose Tee

Fiberglass reinforced nylon fittings designed to fit Series 101, Series 105 and Series 144 and 148 hoses without heating or special tools. For use in sanitation systems, deck drain systems and water tank fill. Fittings are durable, chemical and fuel resistant, will not rust or cause electrolysis.

Bulk Code # N800-0340 N800-1000 N800-1180 N800-1140 N800-1120 N801-1120 N802-1120 N803-1120 N806-1120

Blister Pack Code # Hose I.D. 3 /4" – – 1" – 1 1/8" – 1 1/4" 18-800-1120 1 1/2" 18-801-1120 1 1/2" 18-802-1120 1 1/2" 18-803-1120 1 1/2" 18-806-1120 1 1/2"

mm 19.1 25.4 28.6 31.8 38.1 38.1 38.1 38.1 38.1

Thread 3 /4" MP 1" MP 1" MP 1 1/4" MP 1 1/2" MP 1 1/2" FP 1 1/2" MP 1 1/2" FP N/A

PVC TUBING — CLEAR

• Non-pressurized Potable I.D. mm Wall mm Water System Supply 3/16" 4.8 .062 1.6 1 • Drain Lines – Sink, /4" 6.4 .078 2.0 5 Shower, Ice Box /16" 7.9 .093 2.4 3 /8" 9.5 .094 2.4 Single layer FDA formula vinyl. 1/2" 12.7 .11 2.8 5 /8" 15.9 .11 2.8 Not for hot water or 3/4" 19.1 .11 2.8 pressurized water systems 1" 25.4 .125 3.2 1 1/8" 28.6 .125 3.2 1 1 /4" 31.8 .125 3.2 1 1/2" 38.1 .125 3.2

Burst Pressure Wt. Bulk 100' (30.5m) 70° “C” Code # Pack mm R/O Ctn. Code #

65# 60# 55# 55# 45# 40# 35# 20# 20# 20# 20#

3 4 5 6 12 15 19 27 29 31 34

16-150-0360 16-150-0140 16-150-0560 16-150-0380 16-150-0120 16-150-0580 16-150-0340 16-150-1000 16-150-1180 16-150-1140 16-150-1120

Code No. I.D. mm Length mm

16-163-0585 16-163-0586 16-163-0588 16-163-0587

/8" /8" 5 /8" 5 /8" 5 5

15.9 15.9 15.9 15.9

25' (7.6m) Polypac Code #

750' 228.6 16-150-0367 16-150-0366 16-150-0365 500' 152.4 16-150-0147 16-150-0146 16-150-0145 200' 61.0 16-150-0567 16-150-0566 16-150-0565 200' 61.0 16-150-0387 16-150-0386 16-150-0385 200' 61.0 16-150-0127 16-150-0126 16-150-0125 200' 61.0 16-150-0587 16-150-0586 16-150-0585 200' 61.0 16-150-0347 16-150-0346 16-150-0345 100' 30.5 16-150-1007 16-150-1006 16-150-1005 100' 30.5 — 16-150-1186 16-150-1185 100' 30.5 — 16-150-1146 16-150-1145 50' 15.2 — 16-150-1126 16-150-1125

SHIELDS BRAIDED WASH DOWN HOSE • Superior Dock Side Wash Down Hose • Safe For Potable Water • Lightweight Easy To Handle • Brass Ends White FDA formula vinyl tube. Clear vinyl cover. Polyester braid reinforcement 250 psi burst pressure.

Dist. Pkg. 50' (15.2m) R/O Ctn. Code #

25' 7.6 50' 15.2 75' 22.9 100' 30.5

Bulk Pack

5 5 5 5

Wt.

3.25 6.50 9.75 13.00

Potable/Drain

ALL CLEAR PVC TUBING POLYESTER REINFORCED (RED-TRACER)

• Pressurized Water System Supply – Hot Or Cold • Drain Lines – Sink, Burst Wt. Shower, Ice Box I.D. mm O.D. mm Pressure “C” 9 • Wash Down Pump 3/8" 9.5 /16" 14.3 250# 7 Connections 1/2" 12.7 23/32" 18.3 250# 11 5/8" 15.9 27/32" 21.4 250# 14 • Head Intake 3/4" 19.1 31/32" 24.6 250# 17 Clear heavy wall FDA 1" 25.4 1 5/16" 33.3 250# 24 formula vinyl. Polyester 1 1/8" 28.6 1 3/8" 34.9 250# 32 1 1/4" 31.8 1 5/8" 41.3 250# 44 braid reinforcement – 1 1/2" 38.1 1 15/16" 49.2 250# 67 250 psi burst pressure. ➀ 100' roll

Bulk Pack 250' (76.2m) 50' (15.2m) Coil Code # R/O Ctn. Code #

16-162-0380 16-162-0120 16-162-0580 16-162-0340 16-162-1000 16-162-1180➀ 16-162-1140➀ 16-162-1120➀

16-162-0386 16-162-0126 16-162-0586 16-162-0346 16-162-1006 16-162-1186 16-162-1146 16-162-1126

Dist. Pkg. 25' (7.6m) 10' (3.1m) Polypac Code # Polypac Code #

16-162-0385 16-162-0125 16-162-0585 16-162-0345 16-162-1005 — — —

16-162-0383 16-162-0123 16-162-0583 16-162-0343 16-162-1003 — — —

CLEAR WHITE PVC TUBING POLYESTER REINFORCED (BLUE-TRACER) • Pressurized Water System Supply – Hot Or Cold • Drain Lines – Sink, Shower, Ice Box • Wash Down Pump Connections • Head Intake Burst Wt. White FDA formula vinyl tube. I.D. mm O.D. mm Pressure “C” 3 9 Clear vinyl cover. Polyester /8" 9.5 /16" 14.3 250# 7 1 braid reinforcement /2" 12.7 11/16" 17.5 250# 10 5 13 /8" 15.9 /16" 20.6 250# 13 250 psi burst pressure. 3 /4" 19.1 15/16" 23.8 250# 17

Bulk Pack Dist. Pkg. 250' (76.2m) 50' (15.2m) 25' (7.6m) 10' (3.1m) Coil Code # R/O Ctn. Code # Polypac Code # Polypac Code #

16-164-0380 16-164-0120 16-164-0580 16-164-0340

16-164-0386 16-164-0126 16-164-0586 16-164-0346

16-164-0385 16-164-0125 16-164-0585 16-164-0345

16-164-0383 16-164-0123 16-164-0583 16-164-0343

HEAVY DUTY POLYESTER REINFORCED PVC TUBING

• • • •

Pressurized Water System Supply – Hot Or Cold Wash Down Pump Connections Head Intake Superior Kink Resistance

Clear extra heavy wall FDA formula vinyl. Polyester braid reinforcement – high burst pressure.

I.D. mm O.D. mm

1/4" 3/8" 1/2" 5/8" 3/4" 1" 1 1/4" 1 1/2"

7 6.4 /16" 19 9.5 /32" 3 12.7 /4" 7 15.9 /8" 1 19.1 1 /64" 5 25.4 1 /16" 31.8 1 21/32" 38.1 1 15/16"

11.1 15.1 19.1 22.2 25.8 33.3 42.1 49.2

Burst Pressure

750# 750# 600# 600# 450# 325# 300# 300#

Wt. “C” Code #

5.6 9.2 13.5 16.2 21.1 31.2 51 65

16-168-0140 16-168-0380 16-168-0120 16-168-0580 16-168-0340 16-168-1000 16-168-1140 16-168-1120

Bulk Pack

300' 300' 300' 300' 300' 200' 100' 100'

Dist. Pkg. 50' (15.2m) R/O Ctn. Code #

16-168-0146 16-168-0386 16-168-0126 16-168-0586 16-168-0346 16-168-1006 16-168-1146 16-168-1126

SHIELDS

SHIELDS HOSE

SHIELDS

SHIELDS HOSE

Engine Coolant/Exhaust SPEEDOMETER PITOT TUBING • Connection From Speedometer Pickup (Pitot) To Speedometer Black vinyl tubing. HW reinforced with polyester braid. Wt. Bulk Nominal I.D. mm Braid “C” Code # Pack mm

/8" (.125") 3.2 4 mm (.157") 4.0

0 1

Dist. Pkg. 25' (7.6m) Polypac Code #

2.2 16-151-0180 1500' 457.2 16-151-0185 4.3 16-151-0180H.W. 300' 91.4 16-151-0185 H.W.

Now double the ozone resistance required by SAEJ2006

SHIELDS MARINE EXHAUST/WATER HOSE (No Wire) Wt. 50' Coil I.D. mm O.D. Ply “C” Code # • Straight Connections In Wet 1 7 /2" 13 /8" 2 24 16-200-0120 Exhaust Systems 5 /8" 16 1 1/32" 2 33 16-200-0580 • Engine Water Circulation Lines 3 /4" 19 1 9/64" 2 37 16-200-0340 7 Black heavy walled synthetic rubber. /8" 22 1 17/64" 2 42 16-200-0780 Reinforced with 2 or 4 plies of synthetic 1" 25 1 3/8" 2 48 16-200-1000 cord. Resistant to: engine heat, exhaust 1 1/8" 28 1 1/2" 2 52 16-200-1180 fumes, ozone, mild chemicals, 1 1/4" 32 1 45/64" 2 60 16-200-1140 antifreeze, salt water. 1 5/16" 33 1 47/64" 2 62 16-200-1560 Temperature range: 1 3/8" 35 1 13/16" 2 66 16-200-1380 -20°F to +200°F continuous 1 1/2" 38 1 15/16" 2 70 16-200-1120 +250°F intermittent 1 5/8" 42 2 3/32" 2 77 16-200-1580 Meets SAE J2006 Type R1 1 3/4" 45 2 13/64" 2 82 16-200-1340 1 7/8" 48 2 23/64" 2 96 16-200-1780 2" 51 2 31/64" 2 102 16-200-2000 2 1/8" 54 2 19/32" 2 107 16-200-2180 2 1/4" 58 2 3/4" 2 114 16-200-2140 2 3/8" 60 2 7/8" 2 132 16-200-2380 2 1/2" 63 3" 2 136 16-200-2120 2 5/8" 67 3 3/32" 2 147 16-200-2580 2 3/4" 70 3 17/64" 2 152 16-200-2340 2 7/8" 73 3 7/16" 2 174 16-200-2780 3" 76 3 9/16" 2 182 16-200-3000 3 1/8" 80 3 45/64" 2 190 — 3 1/2" 90 4 3/32" 2 198 — 3 3/4" 95 4 9/32" 2 221 — 4" 102 4 17/32" 4 229 — 4 1/8" 105 4 11/16" 2 251 — 4 1/2" 114 5 1/8" 2 300 — 5" 127 5 5/8" 2 332 — 5 1/2" 140 6 3/16" 2 396 — 6" 152 6 11/16" 2 427 — 6 5/8" 168 7 13/32" 4 560 — 8" 203 8 25/32" 4 670 — 10" 254 10 7/8" 4 934 — 12" 305 12 7/8" 4 1095 — 14" 350 14 7/8" 4 1430 — ✱ Special Order

12 1/2' Length 6 1/4' Length Code # Code # 16-200-0124 16-200-0121 16-200-0584 16-200-0581 16-200-0344 16-200-0341 16-200-0784 16-200-0781 16-200-1004 16-200-1001 16-200-1184 16-200-1181 16-200-1144 16-200-1141 16-200-1564 16-200-1561 16-200-1384 16-200-1381 16-200-1124 16-200-1121 16-200-1584 16-200-1581 16-200-1344 16-200-1341 16-200-1784 16-200-1781 16-200-2004 16-200-2001 16-200-2184 16-200-2181 16-200-2144 16-200-2141 16-200-2384 16-200-2381 16-200-2124 16-200-2121 16-200-2584 16-200-2581 16-200-2344 16-200-2341 16-200-2784 16-200-2781 16-200-3004 16-200-3001 16-200-3184 16-200-3181 16-200-3124 16-200-3121 16-200-3344 16-200-3341 16-200-4004 16-200-4001 16-200-4184 16-200-4181 16-200-4124 16-200-4121 16-200-5004 16-200-5001 16-200-5124 16-200-5121 16-200-6004 16-200-6001 16-200-6584 — 16-200-8004 — 16-200-10004 — 16-200-12004 — 16-200-14004✱ —

Engine Coolant/Exhaust

Now double the ozone resistance required by SAEJ2006

SHIELDSFLEX II MARINE WATER/EXHAUST HOSE (w/wire) • Engine Intake • Wet Exhaust Connections – Use Where Bends Or Long Lengths Required • Bilge Pump Intake/ Discharge • Scupper Lines • Toilet Intake, Discharge • Holding Tank Vent, Pump Out Black synthetic rubber tube and cover. Reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Abrasion resistant. Odor permeation resistant. Temperature range: -20°F to +200°F continuous, +250°F intermittent Meets SAE J2006 Type R2

Wt. I.D. mm O.D. Ply “C” 1 27 /2" 13 /32" 2 24 5 61 /8" 16 /64" 2 28 3 1 /4" 19 1 /16" 2 32 7 3 /8" 22 1 /16" 2 36 1" 25 1 5/16" 2 40 1 7 1 /8" 28 1 /16" 2 44 1 19 1 /4" 32 1 /32" 2 50 5 5 1 /16" 33 1 /8" 2 51 3 23 1 /8" 35 1 /32" 2 58 38 1 53/64" 2 62 1 1/2" 5 1 /8" 42 2" 2 80 3 1 1 /4" 45 2 /8" 2 88 7 19 1 /8" 48 2 /64" 2 93 2" 51 2 13/32" 2 99 1 17 2 /8" 54 2 /32" 2 107 1 11 2 /4" 58 2 /16" 2 127 2 3/8" 60 2 3/4" 2 132 1 7 2 /2" 63 2 /8" 2 137 2 5/8" 67 3 1/16" 2 147 3 3 2 /4" 70 3 /16" 2 164 7 5 2 /8" 73 3 /16" 2 170 7 3" 76 3 /16" 2 177 1 5 3 /8" 80 3 /8" 2 200 1 45 3 /4" 82 3 /64" 2 208 3 1/2" 90 4" 2 223 5 4" 102 4 /8" 2 269 1 47 4 /8" 105 4 /64" 2 276 4 1/2" 114 5 3/32" 2 319 5 5" 127 5 /8" 2 398 5 1/8" 130 5 3/4" 2 417 1 3 5 /2" 140 6 /16" 2 443 21 6" 152 6 /32" 2 482 25 8" 203 8 /32" 2 780

50' (15.2m) 12 1/2' (3.8m) Coil 25' (7.6m) Length Code # Cartons Code # 16-250-0120 16-250-0125 16-250-0124 16-250-0580 16-250-0585 16-250-0584 16-250-0340 16-250-0345 16-250-0344 16-250-0780 16-250-0785 16-250-0784 16-250-1000 16-250-1005 16-250-1004 16-250-1180 16-250-1185 16-250-1184 16-250-1140 16-250-1145 16-250-1144 16-250-1560 – 16-250-1564 16-250-1380 16-250-1385 16-250-1384 16-250-1120 16-250-1125 16-250-1124 16-250-1580 – 16-250-1584 16-250-1340 – 16-250-1344 16-250-1780 – 16-250-1784 16-250-2000 – 16-250-2004 16-250-2180 – 16-250-2184 16-250-2140 – 16-250-2144 16-250-2380 – 16-250-2384 16-250-2120 – 16-250-2124 16-250-2580 – 16-250-2584 16-250-2340 – 16-250-2344 16-250-2780 – 16-250-2784 16-250-3000 – 16-250-3004 16-250-3180 – 16-250-3184 – – 16-250-3144 16-250-3120 – 16-250-3124 16-250-4000 – 16-250-4004 – – 16-250-4184 16-250-4120 – 16-250-4124 16-250-5000 – 16-250-5004 – – 16-250-5184 – – 16-250-5124 16-250-6000 – 16-250-6004 – – 16-250-8004

6 1/4' (1.9m) Length Code # 16-250-0121 16-250-0581 16-250-0341 16-250-0781 16-250-1001 16-250-1181 16-250-1141 16-250-1561 16-250-1381 16-250-1121 16-250-1581 16-250-1341 16-250-1781 16-250-2001 16-250-2181 16-250-2141 16-250-2381 16-250-2121 16-250-2581 16-250-2341 16-250-2781 16-250-3001 16-250-3181 16-250-3141 16-250-3121 16-250-4001 16-250-4181 16-250-4121 16-250-5001 16-250-5181 16-250-5121 16-250-6001 –

Now double the ozone resistance required by SAEJ2006

SHIELDSAUST-C Wt. I.D. mm O.D. Ply “C” 3 /4" 19 1 1/8" 2 27 1" 25 1 3/4" 2 33 1 39 1 /4" 32 /64" 2 45 1 15 1 /2" 38 1 /16" 2 70 1 5/8" 42 2 3/32" 2 80 3 7 1 /4" 45 2 /32" 2 85 1 7/8" 48 2 21/64" 2 91 7 2" 51 2 /16" 2 95 2 1/8" 54 2 9/16" 2 100 2 1/4" 58 2 23/32" 2 107 2 3/8" 60 2 51/64" 2 110 1 59 2 /2" 63 2 /64" 2 115 3 3 2 /4" 70 3 /16" 2 126 7 5 2 /8" 73 3 /16" 2 137 3" 76 3 7/16" 2 143 1 19 3 /8" 80 3 /32" 2 150 3 1/2" 90 4 1/16" 2 200 4" 102 4 9/16" 2 231 4 1/8" 105 4 11/16" 2 238 4 1/2" 114 5 1/8" 2 278 9 5" 127 5 /16" 2 300 6" 152 6 9/16" 2 394 11 8" 203 8 /16" 2 607

50' (15.2m) Coil Code # 16-252-0340 16-252-1000 16-252-1140 16-252-1120 16-252-1580 16-252-1340 16-252-1780 16-252-2000 16-252-2180 16-252-2140 16-252-2380 16-252-2120 16-252-2340 16-252-2780 16-252-3000 16-252-3180 16-252-3120 16-252-4000 – – 16-252-5000 – –

12 1/2' (3.8m) Length Code # 16-252-0344 16-252-1004 16-252-1144 16-252-1124 16-252-1584 16-252-1344 16-252-1784 16-252-2004 16-252-2184 16-252-2144 16-252-2384 16-252-2124 16-252-2344 16-252-2784 16-252-3004 16-252-3184 16-252-3124 16-252-4004 16-252-4184 16-252-4124 16-252-5004 16-252-6004 16-252-8004

6 1/4' (1.9m) Length Code # 16-252-0341 16-252-1001 16-252-1141 16-252-1121 16-252-1581 16-252-1341 16-252-1781 16-252-2001 16-252-2181 16-252-2141 16-252-2381 16-252-2121 16-252-2341 16-252-2781 16-252-3001 16-252-3181 16-252-3121 16-252-4001 16-252-4181 16-252-4121 16-252-5001 16-252-6001 16-252-8001

• Wet Exhaust Connections – With Significant Bends • Engine Intake • Scupper Lines Black synthetic rubber tube and cover. Reinforced with double wire helix imbedded between plies of synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Abrasion resistant. Temperature range: -20°F to +200°F continuous, +250°F intermittent Meets SAE J2006 Type R2

SHIELDS

SHIELDS HOSE

SHIELDS

SHIELDS HOSE

Engine Coolant/Exhaust

SHIELDS NAUTIFLEX SILICONE EXHAUST HOSE — BLUE Wt. I.D.

• Straight Connections In Wet Exhaust Systems • Engine Water Circulation Lines

1" 1 1/8" 1 1/4" 1 3/8" 1 1/2" 1 3/4" 1 7/8" 2" 2 3/8" 2 1/2" 2 5/8" 2 3/4" 2 7/8" 3" 3 1/4" 3 1/2" 4" 4 1/2" 5" 5 1/2" 6" 8" 10" 12" 14"

Blue silicone cover with smooth finish for easy clean up. Flexible – easy to install 4 -plies of synthetic fabric. Stable at elevated temperatures. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +350°F Meets SAE J2006 Type R1 Meets ISO 13363:2004 - Type 2 - Class B

25 28 32 35 38 45 48 51 60 63 67 70 73 76 82 90 102 114 127 140 152 203 254 305 350

O.D.

1.362" 1.487" 1.612" 1.737" 1.862" 2.112" 2.237" 2.362" 2.737" 2.862" 2.987" 3.112" 3.23" 3.362" 3.48" 3.862" 4.362" 4.862 5.362" 5.862" 6.361" 8.362" 10.362" 12.362" 14.632"

SHIELDS NAUTIFLEX CORRUGATED SILICONE EXHAUST HOSE — BLUE

• Main Engine Exhaust • Generator Exhaust • Engine Coolant Circulation Engine Intake • Generator Intake Blue silicone tube and cover with smooth finish for easy clean up. Wire reinforced – will not collapse under suction or in a bend. Corrugated cover – easy to bend for easy installation Two ply construction – wire captured between fabric plies. Stable at elevated temperatures. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water Temperature range: -20°F to +350°F Meets SAE J2006 Type R2 Meets ISO 13362:2004 - Type 1 - Class B

/4"

19 1" 25 1 1 /8" 28 1 1/4" 32 3 1 /8" 35 1 38 1 /2" 5 1 /8" 42 1 3/4" 45 1 7/8" 48 2" 51 2 1/8" 54 60 2 3/8" 1 2 /2" 63 5 *2 /8" 67 3 *2 /4" 70 7 2 /8" 73 3" 76 1 3 /2" 90 4" 102 1 *4 /2" 114 5" 127 *5 1/2" 140 6" 152 8" 203 10" 254 *12" 305 *14" 350 *16" 404 *Special order

1.187" 1.421" 1.546" 1.703" 1.859" 2" 2.171" 2.296" 2.406" 2.531" 2.621 2.875" 3.046" 3.203" 3.312" 3.437" 3.546" 4.296" 4.765" 5.25" 5.75" 6.468" 6.937" 9.109" 11.265" 13.359" 15.281" 17.562"

WT "C"

“C”

33.1 37.2 41.3 45.4 49.6 57.8 62 66.1 78.5 82.6 86.8 90.9 94.1 99.2 103.4 115.7 132 148.5 165 181.5 198 264 330 396 462

34 42 46 52 60 71 74 78 82 87 94 101 113 120 125 134 139 227 255 281 310 449 484 768 1136 1518 1812 2277

3' (.9m) Length Code No.

16-202-1000-36 16-202-1180-36 16-202-1140-36 16-202-1380-36 16-202-1120-36 16-202-1340-36 16-202-1780-36 16-202-2000-36 16-202-2380-36 16-202-2120-36 16-202-2580-36 16-202-2340-36 16-202-2780-36 16-202-3000-36 16-202-3140-36 16-202-3120-36 16-202-4000-36 16-202-4120-36 16-202-5000-36 16-202-5120-36 16-202-6000-36 16-202-8000-36 16-202-10000-36 16-202-12000-36 16-202-14000-36

10' (3.1m) length Code No.

— — — — — — — — — — — — — — — — — — — 16-262-4123 16-262-5003 16-262-5123 16-262-6003 16-262-8003 16-262-10003 16-262-12003 16-262-14003 16-262-16003

6' (1.8m) Length Code No.

16-202-1001 16-202-1181 16-202-1141 16-202-1381 16-202-1121 16-202-1341 16-202-1781 16-202-2001 16-202-2381 16-202-2121 16-202-2581 16-202-2341 16-202-2781 16-202-3001 16-202-3141 16-202-3121 16-202-4001 16-202-4121 16-202-5001 16-202-5121 16-202-6001 — — — —

12 1/2' (3.8m) Length Code No.

16-262-0344 16-262-1004 16-262-1184 16-262-1144 16-262-1384 16-262-1124 16-262-1584 16-262-1344 16-262-1784 16-262-2004 16-262-2184 16-262-2384 16-262-2124 16-262-2584 16-262-2344 16-262-2784 16-262-3004 16-262-3124 16-262-4004 — — — — — — — — —

12' (3.7m) Length Code No.

16-202-1004 16-202-1184 16-202-1144 16-202-1384 16-202-1124 16-202-1344 16-202-1784 16-202-2004 16-202-2384 16-202-2124 16-202-2584 16-202-2344 16-202-2784 16-202-3004 16-202-3144 16-202-3124 16-202-4004 16-202-4124 16-202-5004 16-202-5124 16-202-6004 — — — —

50' (15.2m) coil Code No.

16-262-0340 16-262-1000 16-262-1180 16-262-1140 16-262-1380 16-262-1120 16-262-1580 16-262-1340 16-262-1780 16-262-2000 16-262-2180 16-262-2380 16-262-2120 16-262-2580 16-262-2340 16-262-2780 16-262-3000 16-262-3120 16-262-4000 — 16-262-5000 — — — — — — —

Exhaust

• Provides Angular And Longitudinal Vibration Absorption In Wet Exhaust Systems • Corrects Slight Offset In Pipes Blue silicone cover with smooth finish for easy clean up. Stable at elevated temperatures. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +350°F SINGLE HUMP

Meets SAE J2006 Type R1

DOUBLE HUMP

SILICONE SINGLE/DOUBLE HUMP COUPLERS SINGLE HUMP

DOUBLE HUMP

I.D.

Length

Wt. Ea. (lbs)

Code No.

102 127 152 203 254

6" 6" 8" 8" 12"

152 152 203 203 305

2 2 2 3 4

16-272-4000 16-272-5000 16-272-6000 16-272-8000 16-272-10000

4" 5" 6" 8" 10"

I.D.

6" 8" 10"

Length

Wt. Ea. (lbs)

Code No.

152.4 203.2 254

14" 14" 14"

356 356 356

3 3 4

16-274-6000 16-274-8000 16-274-10000

RUBBER ELBOWS & HOSE HIGH TEMPERATURE EPDM EXHAUST CONNECTORS 100% High temperature EPDM rubber. Maximum operating temperature 250°F (121°C)

Part Number

ID mm

16-245-3000

3.0

5.5

140

5.5

140

1.6

3.75

.25

16-245-3120

3.5

5.5

140

5.5

140

2.0

4.0

102

.25

16-245-4000

4.0

102

5.5

140

5.5

140

1.46

4.25

108

.25

16-245-4120

4.5

114

5.06

129

5.06

129

1.5

3.5

.25

16-245-5000

5.0

127

5.5

140

5.5

140

1.36

4.5

114

.25

16-245-6000

6.0

152

6.5

165

6.5

165

1.74

5.0

127

.25

16-245-8000

8.0

203

8.06

205

8.06

205

2.0

6.5

165

.37

16-245-10000

10.0

254

10.5

267

10.5

267

2.25

2.75

8.5

216

.37

SHIELDS

SHIELDS HOSE

SHIELDS

SHIELDS HOSE Exhaust

Part Number 16-290-2000 16-290-2120 16-290-3000 16-290-3120 16-290-4000 16-290-4120 16-290-5000 16-290-6000 16-290-8000 16-290-10000

Part Number 16-220-3000 16-220-3120 16-221-400x300 16-220-4000 16-220-4120 16-221-500x400 16-220-5000 16-221-600x500 16-220-6000 16-221-800x600 16-220-8000 16-221-1000x800 16-220-10000

ID 2.0 2.5 3.0 3.5 4.0 4.5 5.0 6.0 8.0 10.0

A 3.00 3.50 4.00 4.00 4.50 5.00 5.00 6.00 6.00 8.00 8.00 10.00 10.00

mm A 51 64 76 89 102 114 127 152 203 254

88.9 102 138 140 146 140 155 171 216 254

3.5 4.0 5.25 5.5 5.75 5.5 6.12 6.75 8.5 10.5

89 102 133 140 146 140 155 171 216 267

1.5 1.5 1.5 1.5 1.25 2.0 1.75 1.75 2.0 2.0

38 38 38 38 32 51 45 45 51 51

1.5 1.5 1.5 1.5 1.25 2.0 1.75 1.75 2.0 2.0

38 38 38 38 32 51 45 45 51 51

2.0 2.5 3.75 4.0 4.5 3.5 4.74 5.0 6.5 6.5

51 64 95 102 114 89 120 127 165 165

.25 .25 .25 .25 .25 .25 .25 .25 .37 .37

6 6 6 6 6 6 6 6 9 9

3.5 4.0 5.45 5.5 5.75 5.5 6.12 6.75 8.5 10.0

mm B

mm C

76 3.00 89 3.50 102 3.00 102 4.00 114 4.50 127 4.00 127 5.00 152 5.00 152 6.00 203 6.00 203 8.00 254 8.00 254 10.00

76 89 76 102 114 102 127 127 152 152 203 203 254

5.25 5.25 5.25 5.25 6.00 6.00 6.00 6.00 6.00 6.00 8.00 6.00 6.00

mm D 133 133 133 133 152 152 152 152 152 152 203 152 152

mm E

2.62 3.00 2.00 2.63 3.00 3.00 3.00 3.00 3.00 1.75 4.00 3.00 3.00

67 76 51 67 76 76 76 76 76 45 102 76 76

Part Number

ID1 mm ID2 mm A

16-291-500x400 16-291-600x500

5.50 140 6.00 152

203 127

3.63 5.00

92 127

4.00 102 8.00 5.00 127 5.00

1.87 2.25 2.00 2.00 2.25 2.12 2.25 2.13 2.25 1.95 3.00 2.00 2.00

mm F 48 57 51 51 57 54 57 54 57 50 76 51 51

C mm 1.25 1.50

32 38

Also available with series 720 T-bolt clamps. Order part number with "Kit" Suffix.

mm G

1.87 2.25 3.00 2.00 2.25 1.81 2.25 1.88 2.25 3.00 3.00 1.75 2.00

48 57 76 51 57 46 57 48 57 76 76 45 51

4.50 5.00 5.25 5.25 6.00 6.25 6.10 7.50 7.38 9.50 10.37 11.50 11.50

2.25 1.50

57 38

.20 3.50

mm T mm 114 127 133 133 152 159 155 191 188 241 263 292 292

.25 .25 .25 .25 .25 .25 .25 .25 .25 .25 .31 .25 .25

6 6 6 6 6 6 6 6 6 6 8 6 6

mm T mm 5 89 .25

Exhaust/Clamps

EXHAUST PROTECTOR VALVES Specially Compounded Rubber Flapper Valves Designed To Prevent Water From EnteringThe Exhaust System In Following Seas Or When Backing Down. Made with weather resistant EPDM with U/V stabilizer. 18-#’s include stainless steel hose clamp. N-#’s are bulk flappers only Code #

Pipe Size mm

18-4456* 18-4457* 18-4458*➀ N-184456 N-184457 N-184458➀

3" 4" 5" or 6" 3" 4" 5" or 6"

76.2 101.6 127 or 152.4 76.2 101.6 127 or 152.4

O.E.M.

O.E. #

Mercury Mercury — — — —

34765A1 12644A1 — — — —

* Display Packaged ➀ Must be cut at marks to fit 5" pipe

EXHAUST HOSE CLAMPS T-BOLT BAND CLAMPS Code No.

18-720-1000➁ 18-720-1120➁ 18-720-2000 18-720-2120 18-720-3000 18-720-3120 18-720-4000 18-720-4180 18-720-4120 * 18-720-4120S 18-720-5000 * 18-720-5000S 18-720-5120 * 18-720-5120S 18-720-6000 * 18-720-6000S 18-720-8000 * 18-720-8000S 18-720-10000 * 18-720-10000S 18-720-12000 * 18-720-12000S 18-720-14000 * 18-720-14000S ➁ Clamps for 1" and 1 1/2" are 5/8" wide

Diameter Range mm

1.20 - 1.37 1.64 - 2.02 2.31 - 2.69 2.68 - 3.34 3.10 - 3.76 3.59 - 4.25 4.18 - 4.84 4.25 - 4.95 4.75 - 5.41 4.68 - 5.34 5.30 - 5.96 5.18 - 5.84 5.75 - 6.41 5.68 - 6.34 6.38 - 7.04 6.18 - 6.84 8.42 - 9.08 8.18 - 8.84 10.45 - 11.11 10.18 - 10.84 12.38 - 13.04 12.18 - 12.84 14.50 - 15.16 14.30 - 14.90

30.5 - 34.8 41.7 - 51.3 58.7 - 68.3 68.1 - 84.8 78.7 - 95.5 91.2 - 108 106.2 - 122.9 108.0 - 125.7 120.7 - 137.4 118.9 - 135.6 134.6 - 151.4 131.6 - 148.3 146.1 - 162.8 144.3 - 161.0 162.1 - 178.8 157.0 - 173.7 213.9 - 230.6 207.8 - 224.5 265.4 - 282.2 258.6 - 275.3 314.5 - 331.2 309.4 - 326.1 368.3 - 385.1 363.2 - 378.5

Hose I.D. mm

1" 1 1/2" 2" 2 1/2" 3" 3 1/2" 4" 4 1/8" 4 1/2" 4 1/2" 5" 5" 5 1/2" 5 1/2" 6" 6" 8" 8" 10" 10" 12" 12" 14" 14"

25.4 38.1 50.8 63.5 76.2 88.9 101.6 104.8 114.3 114.3 127.0 127.0 139.7 139.7 152.4 152.4 203.2 203.2 254.0 254.0 304.8 304.8 355.6 355.6

NOW STAIN316 LESS

Wt. “C”

9.4 12.5 12.8 15.6 15.8 17.2 18.8 18.9 20 20 22 22 25 25 27 27 29 29 31 31 33 33 41.1 41.1

• Exhaust Hose Clamp • Intake Hose Clamp – Any Below Water Line Application • Works With Corrugated Exhaust Hose • Full 360° Clamping Surface • Corrosion Resistant 316 Stainless Steel Band: 316 stainless steel, .025 thick by .75 wide Hardware: 316 stainless steel, 1/4" bolt, nylon inset locknut. Extra long bolt for maximum adjustment. Torque to 75 inch pounds maximum. Designed to fit Shields series 200, 201, 210, 250, 252.

* Designed to fit Series 202 silicone exhaust hose

HOSE CLAMPS

All Components Are Manufactured From Marine Grade 316 Stainless Steel. These Clamps Are Designed To Fit Many Applications From 5/16" to 7" Diameter Hoses.

Sierra No.

18-7307 18-7308 18-7309 18-7310 18-7311 18-7312 18-7313 18-7314 18-7315 18-7316 ➂ 18-7317 ➂ PKG OF 2

Diameter Size

Std. No.

/16" to 7/8" 9 /16" to 11/16" 9 /16" to 11/4" 11 /16" to 11/2" 3 /4" to 13/4" 11/16" to 2" 1 9/16" to 21/2" 2 9/16" to 31/2" 21/2" to 41/2"

006 010 012 016 020 024 032 048 064 072 104

3" to 5" 5" to 7"

SHIELDS

SHIELDS HOSE

SHIELDS

SHIELDS HOSE Fuel Hose

Shields Fire-acol 15 - Low Permeation Fuel Hose • Fuel Feed - Gasoline up to 85% ethanol blended fuels / Diesel / Bio-diesel all blends • Complies with EPA and CARB very low permeation requirements • Meets USCG Type A1-15 Requirements For Pleasure Boats Special design NBR tube with embedded plastic barrier layer to limit permeation Design provides easy coupling insertion Polyester reinforced Fire resistant Weather/UV resistant NBR/PVC cover Meets SAE J1527 Type A1-15 ISO 7840 Type A1 NMMA/CE type accepted Temperature range: -20°F to 212°F

Bulk Pack Max Wt. 250' reel 50' R/O Ctn. 10' Polypac I.D. mm O.D. mm WP C Code # Code # Code # 3/8" 9.5 0.76 19.3 100 22 116-365-0380 116-365-0386 116-365-0383 1/2" 12.7 0.90 22.86 100 27 116-365-0120 116-365-0126 116-365-0123

Shields Series 368 Low Permeation Marine Fuel Hose • Fuel Feed - Gasoline up to 85% ethanol blended fuels / Diesel / Bio-diesel all blends • Complies with EPA and CARB very low permeation requirements • Meets USCG Type A1-15 Requirements For Pleasure Boats Plastic barrier veneer with NBR outer layer tube to limit permeation Polyester reinforced Weather/UV resistant NBR/PVC cover Max Wt. I.D. mm O.D. mm WP C Meets SAE J1527 Type A1-15 1/4" 6.4 0.54 13.72 100 11 ISO 7840 Type A1 5/16" 7.9 0.61 15.49 100 13 NMMA/CE type accepted 3/8" 9.5 0.68 17.27 100 16 1/2" 12.7 0.82 20.83 100 20 Temperature range: -20°F to 212°F

Bulk Pack 250' reel 50' R/O Ctn. 25' R/O Ctn 10' Polypac Code # Code # Code # Code # 16-368-0140 16-368-0146 16-368-0145 16-368-0143 16-368-0560 16-368-0566 16-368-0565 16-368-0563 16-368-0380 16-368-0386 16-368-0385 16-368-0383 16-368-0120 16-368-0126 16-368-0125 16-368-0123

Shields Fire-acol Fuel Vent Hose • Fuel Vent Lines - Gasoline up to 85% ethanol blended fuel, diesel fuel • Meets USCG Type A2 Requirements For Pleasure Boats Resists gasoline/alcohol blended fuel Fire resistant Weather/UV resistant NBR/PVC cover Meets SAE J1527 Type A2 ISO 7840 Type A2 NMMA/CE type accepted Temperature range: -20°F to 160°F

Bulk Pack Max Wt. 250' reel 50' R/O Ctn. 25' R/O Ctn 10' Polypac I.D. mm O.D. mm WP C Code # Code # Code # Code # 5 /8" 15.9 0.96 24.38 50 25 16-369-0580 16-369-0586 16-369-0585 16-369-0583

Fuel Hose

SHIELDS FIRE-ACOL FUEL FILL HOSE • Fuel Fill – Gas Or Diesel • For Pleasure Boats Only Resists gasoline/alcohol blends.Compounded for low permeation. Reinforced with wire helix imbedded between plies of HD synthetic cord. Abrasion resistant. Temperature range: -5°F to 180°F

TYPE 2 VENT/FILL HOSE

Meets SAE J1527 Type A2 and ISO 7840 Type A2 NMMA/CE Type Accepted

TYPE 2 VENT/FILL HOSE

Burst

Wt.

50' (15.2m)

12 1/2' (3.8m)

10' (3.1m)

I.D.

O.D.

Ply

Pressure

“C”

Coils Code #

Length Code #

Carton Code #

Length Code #

Carton Code #

1 5/8" 1 7/8" 2" 2 3/8"

41.3 47.6 50.8 60.3

2 3/64" 2 9/32" 2 31/64" 2 27/32"

52.0 58.0 63.1 72.2

2 2 2 2

90# 90# 90# 90#

89 114 121 137

16-350-1580 16-350-1780 16-350-2000 16-350-2380

16-350-1584 16-350-1784 16-350-2004 16-350-2384

16-350-1584BX 16-350-1784BX 16-350-2004BX 16-350-2384BX

16-350-1583 16-350-1583BX 16-350-1783 16-350-1783BX 16-350-2003 16-350-2003BX 16-350-2383 —

Shields Fuel Fill Hose • Fuel Fill - Gas Or Diesel • For Pleasure Boats Only Resists gasoline/alcohol blends. Compounded for low permeation. Reinforced with wire helic imbedded between plies of HD synthetic cord Abrasion resistant Imported Meets SAE J1527 Type A2 and ISO 7840 Type A2 NMMA and CE type accepted I.D.

O.D.

1 1/2" 2"

38.1 1 57/64" 51 2 31/64"

48.0 63.1

Burst

Ply Pressure

2 2

90# 90#

Wt.

50' (15.2m)

12 1/2' (3.8m)

10' (3.1m)

25' (7.6m)

“C”

Coils Code #

Length Code #

Carton Code #

Length Code #

Carton Code #

Length Code #

77 111

16-355-1120 16-355-2000

16-355-1124 16-355-2004

16-355-1124BX 16-355-2004BX

16-355-1123 16-355-1123BX 16-355-2003 16-355-2003BX

16-355-1125 —

SHIELDS FIRE-ACOL — “C” FUEL FILL HOSE • Extra Flexible Fuel Fill – Gas Or Diesel • For Pleasure Boats Only Resists gasoline/alcohol blends. Compounded for low permeation. Corrugated cover for extra flexibility. Reinforced with wire helix imbedded between plies of HD synthetic cord. Abrasion resistant. Temperature range: -5°F to 180°F Meets SAE J1527 Type A2 and ISO 7840 Type A2 NMMA/CE Type Accepted

Burst Wt. I.D. mm O.D. mm Ply Pressure “C”

1 1/2" 38.1 1 57/64" 48.0 2

90#

Bulk Pack 50' (15.2m) Coils

12 1/2' (3.8m) Length

Dist. Pkg. 10' (3.1m) Length

77 16-351-1120 16-351-1124 16-351-1123

SHIELDS

SHIELDS HOSE

SHIELDS

SHIELDS HOSE Fuel/Oil Hose

SILVERADO 2000 OUTBOARD FUEL HOSE • Premium Outboard Fuel Fill • Fuel Tank Vent (Outside Engine Compartment) • For Pleasure Craft Only • Not for use on boats produced after 1/1/2009 due to EPA regulations • EPA regulations do not allow use of this product in new detachable fuel line assemblies Resistant to gasoline/alcohol blends. Remains flexible at low temperatures. UV resistant. Temperature range: -5°F to 180°F Meets SAE J1527 Type B2 Burst Wt. Bulk Pack I.D. mm O.D. mm Ply Pressure “C” Code #

1/4" 6.4 5 /16" 7.9 3/8" 9.5 5 /8" 15.9

/32" /32" 21 /32" 29 /32" 17 19

13.5 15.1 16.7 23.0

2 2 2 2

175# 175# 175# 175#

9.2 10.8 12.3 24.0

— — — 16-315-0580 (250' reel)

50' (15.2m) R/O Ctn. Code #

Dist. Pkg. 25' (7.6m) R/O Ctn. Code #

10' (3.1m) Polypac Code #

— — — 16-315-0586

16-315-0145 — — 16-315-0585

16-315-0143 16-315-0563 16-315-0383 16-315-0583

Silverado 3000 Outboard Fuel Line • EPA Compliant Outboard Fuel Line • For use in above deck primer bulb assemblies • Resistant to Ethanol blend fuels • CARB Compliant for small engine use Thermoplastic construction resists UV Barrier layer prevents permeation Gray color keeps hose cooler to help prevent vapor lock

Wt. Bulk Pack I.D. mm O.D. mm “C” Code #

50' (15.2m) R/O Ctn. Code #

Dist. Pkg. 25' (7.6m) R/O Ctn. Code #

5 /16" 7.9 0.502 12.75 7 16-331-0560 16-331-0566 16-331-0565 16-331-0563 3/8" 9.5 0.54 13.72 7.65 16-331-0380 16-331-0386 16-331-0385 16-331-0383

SHIELDS OIL TANK FILL HOSE • 2-Cycle Oil Tank Fill Nitrile/PVC blend for excellent oil resistance. Flexible corrugated design. Smooth bore, vinyl helix to prevent collaspe. Resists ozone, cold temperature cracking.

I.D. mm

1 1/2" 38.1

10' (3.1m) Polypac Code #

Bend Radius mm

101.6

Wt “C”

Bulk Pack 100' (30.5m) Coils Code #

16-309-1120

Dist. Pkg. 50" (15.2m) R/O Ctn. Code #

16-309-1126

Brass Fittings

FERRULE VISE/DIES Hand Operated Vise For Making Fuel Line Assemblies Without Clamps. Vise Uses Ordinary Barbed Fittings With Series 700 Solid Brass Ferrules. Makes Professional Looking Leak Proof Fuel Lines. Furnished with removable handle. Dies must be ordered separately. When ordering dies, please consult chart under brass ferrules to determine proper size. ★

No. 18-J-662-xxx

Dies give longitudinal crimp.

★

No. 18-J-664-xxx

Dies give circular and longitudinal crimp.

★

No. 18-J-VISE

Vise (w/o dies)

★

Special Order Only

ADAPTER — MALE PIPE TO SAE 45° FLARE

45° SAE FEMALE SWIVEL

Code No. Hose I.D. Tube 1 1 18-502-1476 /4" /4" 1 5 18-502-1412 /4" /16" 5 5 18-502-5612 /16" /16" 5 3 18-502-5658 /16" /8" 3 3 18-502-3858 /8" /8" 3 1 18-502-3834 /8" /2" 1 1 18-502-1234 /2" /2" 1 5 18-502-1278 /2" /8" Standard Package: 100 pieces

Thread 7 /16-20 1 /2-20 1 /2-20 5 /8-18 5 /8-18 3 /4-16 3 /4-16 7 /8-14

MALE PIPE

Bulk Pack Code No.

Hose Barb Sierra No.

Std. Pkg. 100

Std. ctn. 12 (1 per card)

18-500-1418 18-500-1414 18-500-5618 18-500-5614 18-500-3812 18-500-3818 18-500-3814 18-500-3838 18-500-1238 18-500-1212 18-500-5838 18-500-5834

18-8043 18-8042 18-8054 18-8055 — 18-8073 18-8074 18-8044 — — 18-8041

—

Code No. 18-600-1418 18-600-1414 18-600-5618 18-600-5614 18-600-3818 18-600-3814 18-600-3838 18-600-1212

Tube 1 /4" 1 /4" 5 /16" 5 /16" 3 /8" 3 /8" 3 /8" 1 /2"

Pipe 1 /8" 1 /4" 1 /8" 1 /4" 1 /8" 1 /4" 3 /8" 1 /2"

ADAPTER MALE PIPE TO SAE 45° FLARE 90°

Code No. 18-601-3814

Tube 3 /8"

Pipe 1 /4"

Standard Package: 100 pieces

SHIELDS SOLID BRASS FERRULES

Hose I.D. Thread

/4" /4" 5 /16" 5 /16" 3 /8" 3 /8" 3 /8" 3 /8" 1 /2" 1 /2" 5 /8" 5 /8"

/8" /4" 1 /8" 1 /4" 1 /2" 1 /8" 1 /4" 3 /8" 3 /8" 1 /2" 3 /8" 3 /4"

Code No. Hose Type 18-700-5500 16-368-0140 18-700-6250 16-368-0560 18-700-6750 16-360-0140 18-700-7000 16-368-0380 18-700-7250 16-360-0560 18-700-7750 16-365-0380 18-700-8000 16-360-0380 18-700-8250 16-368-0120 18-700-9250 16-360-0120 18-700-1025 16-360-0580

Die Set 550 625 675 700 725 775 775 825 900 1025

Wt. “M” — — — — — — — — — 39.5

SHIELDS

SHIELDS HOSE

SHIELDS

SHIELDS HOSE

AC Duct/Ventilation Hose SHIELDS 400/402 VINYLVENT • Venting Of Bilge Fumes PVC supported by anodized wire helix. Resistant to UV and ozone. I.D. mm O.D. mm

3" 76.2 4" 101.6

3 1/8" 4 1/8"

79.4 104.8

Bulk Pack Dist. Pkg. Wt/ 50' (76.2m) Length 10' (3.1m) Polypac “C” Code # White Code # White

8 10

3" 76.2 4" 101.6

3 1/8" 4 1/8"

79.4 104.8

8 10

16-400-3000 16-400-3003 16-400-4000 16-400-4003 Code # Black

Code # Black

16-402-3000 16-402-3003 16-402-4000 16-402-4003

SHIELDS EXTRA HEAVY DUTY VINYLVENT • Venting Of Bilge Fumes

I.D. 3" 4"

mm O.D. 76 3 1/8" 102 4 1/8" Bulk Pack: 3" 6 x 50 4" 4 x 50

Extra heavy PVC wall. Supported by vinyl coated helical wire. Resistant to: ozone, UV, corrosion. Flame resistant: meets UL 94V standard.

mm 79.4 104.8

Wt. “C” 17 25

Code No. 16-420-3000 16-420-4000

SHIELDS FIBERVENT • Venting Of Bilge Fumes • A/C Ducting Hose

Vac Bulk m I.D. mm O.D. mm Rating Wt. “C” Code No. 6 x 25' 1.8x7.6 3" 76.2 3 1/4" 82.6 20 13 16-450-3000 8 x 25' 2.4x7.6 4" 101.6 4 1/4" 108 20 15 16-450-4000 8 x 25' 2.4x7.6 5" 127 5 1/4" 133.4 20 17 16-450-5000 4 x 25' 1.2x7.6 6" 152.4 6 1/4" 158.8 20 19 16-450-6000 2 x 25' .6x7.6 7" 177.8 7 1/4" 184.2 20 21 16-450-7000

Vinyl coated woven fiberglass. Supported by vinyl coated helical wire. Resistant to: ozone, UV, corrosion. Flame resistant: meets UL 181 Class 1. Temperature range: -20°F to +250°F

SHIELDS AIR CONDITIONER DUCTING HOSE • Venting Of Bilge Fumes • A/C Ducting Hose Smooth tube for maximum airflow. Vinyl coated woven fiberglass. Supported by vinyl coated helical wire. Resistant to: ozone, UV, corrosion. Flame resistant: meets UL 94-V-0. Temperature range: -20°F to +200°F

Bulk 5 x 25' 6 x 25' 5 x 25' 4 x 25' 2 x 25'

m 1.5x7.6 1.8x7.6 1.5x7.6 1.2x7.6 .6x7.6

I.D. 3" 4" 5" 6" 7"

mm 76 102 127 152 178

O.D. mm Wt. “C” 3 1/4" 82.5 22 4 1/4" 108 24 5 1/4" 133.4 32 6 1/4" 158.8 36 1 7 /4" 184.2 44

Code No. 16-460-3000 16-460-4000 16-460-5000 16-460-6000 16-460-7000

SHIELDS STERNFLEX • Cover For Harness, Hoses On Bracket Mounted Outboard Engines Polyethylene copolymer wall with integral polyethylene helix. Resistant to: abrasion, crushing and UV.

Bulk Pack 50' (15.2m) Length Code No. 16-126-2000B

Dist. Pkg. 10' (3.1m) Bend Box Code No. I.D. mm Radius mm Wt. “C” 16-126-2003B 2" 50.8 3 76.2 39

Conduit/Gasket Material FLAME RETARDANT SPLIT WIRE CONDUIT • Provides Chafing Protection For Wiring Systems Flame retardant polypropylene. Black Dist. Pkg. 100' (30.1m) 50' (15.2m) 50' (15.2m) with blue stripe. Split longitudinally I.D. mm Wt. “C” Code # Pack m R/O Ctn. Code # R/O Ctn. Code # Box Code # for easy access to harness. 1 /4" 6.4 1.26 16-128-0140B 3200' 975 16-128-0147B 16-128-0146B 16-128-0146B-1 3 /8" 9.5 1.58 16-128-0380B 1800' 549 16-128-0387B 16-128-0386B 16-128-0386B-1 Temperature range: +275°F 1 /2" 12.7 2.31 16-128-0120B 1100' 335 16-128-0127B 16-128-0126B 16-128-0126B-1 5 Meets ABYC standard 8.15.19. /8" 15.9 2.94 16-128-0580B 750' 229 16-128-0587B 16-128-0586B 16-128-0586B-1 3 Meets UL 94 V2 /4" 19.1 3.47 16-128-0340B 450' 137 16-128-0347B 16-128-0346B 16-128-0346B-1 1" 25.4 5.78 16-128-1000B 300' 91 16-128-1007B 16-128-1006B 16-128-1006B-1 1 1/4" 31.8 9.24 16-128-1140B 200' 61 16-128-1147B 16-128-1126B — 1 1/2" 38.1 15.23 16-128-1120B 100' 31 — 16-128-1146B — 2" 50.8 21.00 16-128-2000B 100' 31 — — —

Neoprene Sheet Rubber Solid Neoprene sheet rubber is designed for use under fuel tanks to comply with USCG requirements for air space. Also for gaskets, component padding and under wire straps Can be custom cut to a variety of strips and shapes. Bulk rolls 36" wide x 10' long

Bulk Sheet

Description

Code No.

Thickness

Width

Length

N18NEO60 N316NEO60 N14NEO60 N38NEO60

1/8" 3/16" 1/4" 3/8"

3.2 4.8 6.4 9.5

36" 36" 36" 36"

914.4 914.4 914.4 914.4

10' 10' 10' 10'

3.1 3.1 3.1 3.1 Available in custom cut pieces

Distributor Boxes

Description

Code No.

Thickness

Width

Length

16-18X2X10 16-14X2X10 16-38X2X10 16-18X1X10 16-14X1X10 16-38X1X10

1/8" 1/4" 3/8" 1/8" 1/4" 3/8"

3.2 4.8 9.5 3.3 6.4 9.7

2" 2" 2" 1" 1" 1"

50.8 50.8 50.8 25.4 25.4 25.4

10' 10' 10' 10' 10' 10'

3.1 3.1 3.1 3.1 3.1 3.1

SHIELDS ROLLOUT CARTONS

A convenient, attractive dispenser pack for Shields Marine Hoses. The carton is designed to allow the dealer to store, protect and dispense product. Easy rollout spool in every package, allows for more product to be stored per shelf. And best of all it works!

SHIELDS

SHIELDS HOSE

SHIELDS