Proof mapapro catalogfinal usa

Hand and Arm Protection Catalog

A solution for every hand that works

A

for the job in hand, there is a Mapa glove

www.mapa-pro.com

A solution for every hand that works

Because every company faces different risks,

This catalog has been designed to help you find

the product that gives you the protection you need.

Mapa Professional has a wide range of protective gloves and sleeves

STEP 2

New materials, processes and finishes... Mapa Professional gloves are designed to overcome the constraints of the professional and industrial world, as well as to meet increasing demands for protection and comfort:

me

me

u

u

u

rt Pa

fo

n

fo

n

rt Pa

Re

n

fo

Re

Identify your protection needs:

me

> STEP 1: Re

Disposable

STEP 3

rt Pa

P. 8

n Category 1: The manufacturer is responsible for the conformity of its products with respect to the essential requirements of the Directive.

P. 10 n

fo

n Category 2: Certificate of conformity obtained from a notified body.

me

Re

For prolonged contact with mildly aggressive liquids.

Chemical Protection

rt Pa

n Category 3: Certificate of conformity and regular production inspections on the manufacturer's premises by the notified bodies.

P. 12

A solution for every chemical risk situation when handling more or less aggressive products

Handling Protection

Pictograms The following pictograms, defined according to European standards, can help you understand the performance characteristics of a glove:

P. 20

To provide hand comfort and protection specially designed for various types of work involving cutting hazards.

Define the type of gloves that best meets your needs in terms of:

Thermal Protection

P. 30 For any work requiring thermal protection in a hot or cold environment

Critical Environments

• usage (performance, comfort, environment, wear time), • the environment and the risks involved.

P. 34

u

fo

n

P. 22

Re

> STEP 2:

me

To resist injuries endured during general handling work (precision work/heavy-duty work).

Cut Protection

European Directives regarding personal protective equipment lay down the requirements that the equipment and their users must satisfy.

The standards are used to draw up technical specifications that meet these new requirements.

Directive 89/656/EEC (use) lays down the requirements that employers must meet with regard to the supply and use of PPE by their employees.

Directive 89/868/EEC lays down the essential requirements for marketing protective gloves within the European Union.

The whole Mapa Professional range is certified in compliance with these essential requirements, and is labelled with the CE-marking.

CE certification categories

Disposable gloves to protect hands and products during delicate work.

Liquidproof Protection

European legislation and standards

u

2

A

for the job in hand, there is a Mapa glove

rt Pa

> STEP 3: Select the most appropriate reference to meet your needs with the help of the technical characteristics table.

MECHANICAL HAZARDS EN 388 PERFORMANCE LEVELS* 0-4 0-5 0-4 0-4 Puncture resistance Tear resistance Blade cut resistance Abrasion resistance GENERAL CHEMICAL PROTECTION EN 374 MICRO-ORGANISMS EN 374 RADIOACTIVE CONTAMINATION EN 421 HEAT AND FIRE EN 407

To ensure the protection of both operators and the products they handle in controlled or confined environments

PERFORMANCE LEVELS* 0-4 0-4 0-4 0-4 0-4 0-4

For more information and to download the data sheets for all of our products

www.mapa-pro.com

i IMPORTANT INFORMATION SPECIFIC CHEMICAL PROTECTION EN 374 Letter Code Chemical product A Methanol G Diethylamine B Acetone H Tetrahydrofurane C Acetonitrile I Ethyl acetate D Dichloromethane J n-heptane E Carbon Disulfide K Sodium hydroxide 40% F Toluene L Sulphuric acid 96% COLD HAZARDS EN 511 PERFORMANCE LEVELS* 0 - 4 0 - 4 0 or 1 Water permeability Contact cold resistance Résistance au froid convectif

Resistance to large quantities of molten metal Resistance to small drops of molten metal Radiant heat resistant Convective heat resistance Contact heat resistance * Level X: the test is not applicable or the glove has not been tested.

European pictograms Burning behaviour

3

UNDERSTAND THE SPECIFIC CHARACTERISTICS of a glove in order to make the best choice.

4

> Why opt for one

type of wrist finish rather than another?

Because wrist finishes are designed according to the type of use and precise characteristics.

A

for the job in hand, there is a Mapa glove

>A natomical or ambidextrous glove? > What shape, size or thickness?

anatomical

A glove is called when there is one shape for the left hand and another for the right.

Wrist protection, quick glove removal and good ventilation of the hand. Perfect for jobs with a risk of entanglement.

The various interior finishes

Powdered Makes it easier to put gloves on and take them off, without having to increase the thickness of the glove.

Chlorinated

Ambidextrous

gloves can be worn equally well on either hand; this is principally the case for thinner gloves.

Makes it easier to put on and take off gloves, without increasing the thickness and without using powder. Reduces the allergy risk of natural latex gloves.

Glove lengths.

Safety cuff

>

Flocked

They must be chosen in accordance with the risks associated with the handling circumstances, to give more or less protection to the forearm. They generally vary between 8” to 24” (22 and 60 cm).

Cotton-based textile fibres, covering the inside of the gloves. Fleeced feel providing good absorption of perspiration.

Textile support Knitted interior, made from cotton or synthetic materials for increased comfort or specific performance.

The different textile types Cotton: Comfort, thermal insulation and

Knitted wrist

absorption of perspiration.

Polyamide: Optimized dexterity (fine, seamless).

Fitted to the hand and protects the wrist.

Para-aramide: Cut and heat-resistant.

High density polyethylene: Cut-resistant

and optimized dexterity (PEHD).

Straight cuff Better hand ventilation.

> How to choose the appropriate exterior finish?

Rolled cuff Increased resistance to tearing when putting gloves on.

Scalloped cut Longer-lasting glove.

Glove sizes.

This depends on the circumference of the user's palm, and varies from size 6 to 11.

To be comfortable during use, a glove needs to be the correct size.

Glove thickness.

This influences the user's dexterity and the glove's performance.

It varies from 4 to 40mil (0.08 to 2.5 mm).

Smooth

Embossed texture

Pebbled

Reinforced grip

Grip and proof

Dots

GRIP & PROOF

does not mark the objects handled

excellent grip in oily environments

good grip and minimal glove fouling

excellent grip in wet environments

Excellent grip in oily environments combined with liquidproof protection

improved thermal insulation

Mapa Professional Catalog - www.mapa-pro.com

5

GRIP & PROOF TECHNOLOGY To protect hands in oily and/or dirty environments 6

> There are a large number of workstations that require the use of protective gloves, whether or not cut protection is also needed.

A

for the job in hand, there is a Mapa glove

Our Grip & Proof Range

Skin Protection

When handling oily or dirty parts, workers are in contact with cutting fluids which, due to the products they contain, are often irritants.

• Impermeable at the strategic points • Protects from often highly irritating liquids

> Precision work

• Guaranteed DMF free •R educes the risk of eczema and dermatitis.

Risk of eczema, dermatitis, muscle fatigue and risk of dropping objects can be increased and affect working conditions.

> Dexterity required > No cut protection required

ULTRANE GRIP & PROOF Range

90% of professional skin complaints are eczema or dermatitis often caused by irritation or allergies.

P. 20

> Precision

work & cut

Thanks to our expertise and reliable test methods that directly link to usage, Mapa Professional has designed a glove range with a technology that combines liquid resistance and grip: the solution for oily and/or dirty environments.

> Exposed intensive work > Cut protection required

KRYNIT

GRIP & PROOF Range

P. 22 c°

Grip • Excellent grip when handling oily and dirty parts “sharp or not’’ • Prevents risks from dropping objects • Reduces muscle fatigue • Offers better productivity.

04-

°0

c°

5X

01c°

04-

°0

c°

01-

Durability • Coating 2x more durable than the standard gloves on the market •G love stays clean and effective longer due to its liquid resistance • Optimizes your costs.

>H eavy-duty 5X

work & cut > Dexterity required > Cut protection required

KRONIT

GRIP & PROOF Range

P. 28 Mapa Professional Catalog - www.mapa-pro.com

7

Disposable

POLYMER

COMFORT

GLOVE

DESCRIPTION

SIZE

LENGTH/ THICKNESS

INTERIOR/EXTERIOR FINISH

STANDARDS

APPLICATIONS

V-5

POWDERED

8

89

10.5 in (26.7 cm) / 0.005 in (5 mil)

Automotive/mechanical industry: - Assembly of small parts Mechanical industry: - Precision assembly Laboratory: - Tests

Powdered/Smooth

PR, LH & RH

Excellent dexterity and flexibility, recommended for light food handling

Mapa Professional offers a range of disposable gloves to meet your needs, regardless of your working environment.

SOLO 967

Food industry: - Deboning poultry - Fruit picking - Handling of fatty foods - Preparation and packaging Mechanical industry: - Assembly of small oily parts

9.5 in (24 cm) / 0.003 in (3 mil) (0.08mm) 67 89

The use of different polymers makes it possible to optimize glove performance and ergonomics: flexibility, sturdiness, comfort, etc.

SOLO GREEN 977

HOW CAN YOU REFINE YOUR CHOICE?

The best chemical protection in disposable range: the compromise between protection and dexterity

6 7 8 9 10 11

flexibility and comfort

NITRILE

NITRILE

Automotive/mechanical industry: - Assembly of small oily parts Laboratory: - Manufacturing of medicines

12 in (30 cm) / 0.008 in (8 mil) (0.20mm) CAT 3

Automotive/mechanical industry: - Assembly of small oily parts Food industry: - Common cleaning tasks - Food handling Laboratory: - Research, analysis, handling of precision parts - Pharmaceutical preparation - Research, analysis, manipulation of precision parts

flexibility, mechanical resistance and chemical resistance

to splashes.

Better absorption of perspiration

CHLORINATED

0.004 in (4 mil) (0.11mm)

SOLO ULTRA 997

Aeronautics industry:

Gloves are quick to put on and no traces of powder are left on the hands

9.5 in (24 cm) / POWDERED

0.004 in (4 mil) (0.11 mm)

- Work with composite materials (resins) Automotive/mechanical industry: - Assembly of small oily parts Laboratory: - Manufacturing of medicines - Pharmaceutical preparation - Research, analysis, handling of precision parts

Powdered/Smooth with pebbled fingertips

SOLO ULTRA 996

> COLOR TRILITES GRIPPY

The use of different colors is a response to the unique demands of certain sectors and it enables visual checks by the assignment of a specific color to each application.

983

11.5 in (29 cm) 67 89

0.006 in (6 mil) (0.15mm) 10 in (24.5 cm) /

> DIMENSIONS

993 lus xc iv

Te

ch

There are several advantages of disposable gloves:

Tripolymer formula for protection against chemical splashes

nolo

• freedom of movement

0.006 in (6 mil) (0.15mm)

0.006 in (6 mil) (0.15mm)

CHLORINATED

Laboratory: - Research, analysis, handling of precision parts - Research, analysis, manipulation of precision parts, optical processes

Chlorinated/Non-slip grip

10 in (24.5 cm) /

gy

E

TRIPOLYMER e

Choosing the length and thickness of the glove makes it possible to factor in the limitations related to the workstation: dexterity, resistance and forearm protection.

10 in (24.5 cm) /

Excellent mechanical resistance, ideal in oily environments

> INTERIOR FINISHES The various interior finishes (powdered/chlorinated) make it possible to adapt to the specific characteristics of applications and the specific requirements of the wearer.

POWDERED

Laboratory: - Pharmaceutical preparation

SOLO ULTRA 980

mechanical resistance and resistance to oils

TRIPOLYMER

0.004 in (4 mil) (0.11mm)

Chlorinated/Smooth with pebbled fingertips

mechanical resistance and price

LATEX

9.5 in (24 cm) /

CHLORINATED

> POLYMERS PVC

Chemical industry: - Sampling chemicals Cosmetics and Pharmaceutical industry: - Handling in laboratories

Chlorinated/Pebbled

CAT 3

Laboratory: - Manufacturing of medicines - Pharmaceutical preparation

TRILITES 994

• protection for hands and the products being handled • r olled cuff to prevent tearing while ensuring the glove stays in place on the arm To ensure consistent quality across the disposable range, these gloves are all of an Acceptable Quality Level (AQL).

NATURAL RUBBER

Optimal flexibility and dexterity

SOLO PLUS 995 A

for the job in hand, there is a Mapa glove

9.5 in (24 cm) / 0.004 in (4 mil) (0.10 mm)

Chlorinated/Smooth with pebbled fingertips CAT 3

Health: - Common Tasks in hospitals and clinics Laboratory: - Manufacturing of medicines - Pharmaceutical preparation - Research, analysis, handling of precision parts

Mapa Professional Catalog - www.mapa-pro.com

9

Disposable

PVC/VINYL

Light bisque finish provides a safe grip for wet or dry applications

WEAR TIME

GLOVE

DESCRIPTION

SIZE

LENGTH/ THICKNESS

MATERIAL/ INT. FINISH/ EXT. FINISH

STANDARDS

PYLOX Hand-specific, curved-finger design for low hand fatigue, excellent fit.

6 7 8 9

10.5 in (26.7 cm) / .010 in (10 mil) (0.25 mm)

Automotive/mechanical industry: - Assembly of small parts Mechanical industry: - Precision assembly Other industries: - Laboratory tests

PVC (Vinyl)/ Powdered/ Smooth

V-10

10

APPLICATIONS

11

DUO-NIT Dexterity and optimized resistance to oils and greases

LIGHT

6 7

12.20 in (31 cm) /

8 9

.016 in (18 mil)

10

(0.40 mm)

180

This line meets hand comfort and protection needs for all work involving liquids with a low chemical aggression factor: water, cleaning products, etc.

JERSETLITE

307

Exceptional comfort and precision dexterity in light aggressive environments

6 7 8 9

12.20 in (31 cm) / .295 in (0.75 mm) Medium Weight

Natural Ruibber/ Flocked/ Embossed texture, chlorinated

Natural Rubber/ Textile support/ Pebbled

CAT 3

2121 X1XXXX CAT 2

ECO-FOOD

PERFORMANCE INDICATORS

To choose the most suitable product for your needs, we suggest you take into account two criteria:

6 7

12.5 in (32 cm) /

8 9

.014 in (14 mil) (0.35 mm)

10

168

> PROTECTION:

SURE-GRIP

L-200

The performance level of a liquidproof glove is directly linked to your working environment.

Dexterity and flexibility adapted to contact with food

The greater the risk, the stronger your gloves need to be and the longer they need to protect you.

7 8

12 in (31 cm) /

9 10

.018 in (18 mil) (0.46 mm)

11

0010 Natural Rubber/ Smooth chlorinated/ Embossed texture, chlorinated

CAT 3

0010

CAT 3

L-200LH

• LIGHT PROTECTION use in light aggressive environments (cleaning products, water, etc.)

• STANDARD PROTECTION use in aggressive environments (detergents, etc.)

2110

SURE-GRIP

STANDARD

7 8

12 in (31 cm) /

9 10

.020 in (20mil) (0.50 mm)

11

• HIGH-LEVEL PROTECTION use in aggressive environments (handling of heavy, slippery and rough objects, concentrated detergents, etc.)

Natural Rubber/ Flocked/ Embossed texture

0010

BLUE-GRIP

> WEAR TIME:

Maximum comfort for long-term work in aggressive environments

This criteria identifies the comfort level required by the operator.

The longer the wear time, the more comfortable the glove needs to be (perspiration, flexibility/fatigue).

OPTIMO

INTERMITTENT USE

(opt for a flocked interior finish)

454 HARPON

USE CONTINUOUS (opt for a fabric-lined finish to limit the effects of perspiration)

HIGH-LEVEL

321 HARPON

Precision dexterity in mildly aggressive environments, for those sensitive to natural latex

Comfort and safety when gripping heavy, rough or slippery objects in highly aggressive environments

Heavy. Weight.

Natural Rubber/ Textile support/ Non-slip grip

326

3141

X1XXXX CAT 3

6 7

12 in (31 cm) /

8 9

.014 in (14 mil)

10

(0.35 mm)

6 7 8 9 10

326LC Comfort and safety when gripping heavy, rough or slippery objects in food industry

A

8 9

12 in (31 cm) / .045 in (1.15 mm)

LL-301

SHORT-TERM USE

(opt for a chlorinated interior finish)

for the job in hand, there is a Mapa glove

6 7

12.5 in (32 cm) / .050 in (1.35 mm) Heavy Weight

Synthetic Elastomer/ Flocked/ Embossed texture

Natural Rubber/ Textile support/ Reinforced grip

7 8 9 10

12.5 in (32 cm) Heavy Weight

Food industry: - Canning - Cheese-making - Deboning poultry - Filleting Fish - Food preparation - Handling fruits and vegetables

Aeronautics industry: - Work with composite materials (resins) Food industry: - Handling frozen products - Oyster farming - Preparation and packaging Glass industry: - Handling glass sheets

CAT 3

4131

X2XXXX CAT 2

Natural Rubber/ Textile support/ Reinforced grip

Food industry: - Common cleaning tasks Local Authorities (Cleaning): - Handling household detergents Mechanical industry: - Assembly of small, oil and grease free parts

Health: - Common Tasks in hospitals and clinics Local Authorities (Cleaning): - Handling household detergents

3000

14 in (35 cm) Heavy Weight

Local Authorities (Cleaning): - Handling household detergents Local Authorities (Technical Maintenance): - Small general maintenance jobs

Food industry: - Canning - Cheese-making - Deboning poultry - Filleting Fish - Food preparation - Handling fruits and vegetables Local authorities (Cleaning): - Handling of household detergents

CAT 3

LF-128

Mechanical industry: - Assembly of small oily parts Other industries: - Cleaning and general maintenance in wet environments

4131

X2XXXX CAT 2

Fishing: - Fish-handling - Oyster farming - Work with frozen products

Fishing: - Fish-handling - Handling fresh, slippery products Food industry: - Fishing - Handling of fatty foods - Oyster farming

Mapa Professional Catalog - www.mapa-pro.com

Liquidproof Protection

Liquidproof Protection

PROTECTION

A COMPLETE RANGE CLASSIFIED BY POLYMER MAPA'S RECOMMENDATION

STEP 1

STEP 2

YOU ARE HANDLING

CAS

EN374

PVC

LATEX

Light protection •

NITRILE

NEOPRENE

Common polymers*

Alcohols

67-56-1

A

Ketones

67-64-1

B

Nitriles

75-05-8

Chlorinated solvents [methylene

More than 100,000 chemical substances are now classified, and can be identified, due to their unique CAS numbers.

In order to meet the diversity of hazardous situations that exist, Mapa Professional propose a wide range of protective gloves designed using polymers, which, due to their intrinsic nature, will behave differently with respect to the same chemical product.

Refer to our dynamic database, which is constantly updated, and download the chemical resistance tables for our gloves.

●●●

C

●

●●●

75-09-2

D

●

Sulphur-based chemicals

75-15-0

E

Aromatic solvents

108-88-3

F

Amines

109-89-7

G

●

Ethers

109-99-9

H

●

●

●

●

Esters

141-78-6

I

●

●

●●●

●

Aliphatic solvents

142-82-5

J

●

●●●

●●

●

●●●

Alkalis

1310-73-2

K

●●

●●●

●●●

●●●

●●●

●●●

Oxidizing acids

7664-93-9

L

●●

●●

●●

●●●

●●●

●●●

●

●●

●●

●●●

●

●●●

●●●

●●●

●●●

●●●

●

●

●

●●●

●●

●●

●●●

●

●

●●

●

●

●●●

●●

●●●

[acetonitrile methyl cyanide 99%] chloride/dichloromethane 99%] [carbon disulphide 100%]

[toluene 100%]

[diethylamine 98%]

[tetrahydrofurane (THF) 100%]

[heptane 99%]

The results of chemical testing and the different chemical classification indices must not be seen as the only factors when selecting a glove. Actual usage conditions, the contact time with a given chemical, the concentration, the temperature, the usage frequency of a glove and the care conditions can affect glove performance.

All of these factors should be taken into account when choosing the right glove.

SELECT THE MOST APPROPRIATE CHEMICAL GLOVE FOR YOUR NEEDS, USING THE THREE STEPS BELOW: STEP 1: I dentify which family of chemical products the substance you are handling belongs to.

STEP 2: D etermine the most appropriate protective material for your specific application.

STEP 3: C hoose your gloves according to the level of protection you require.

PERFORMANCE INDICATORS To characterize the performance of the elastomers and plastics used to manufacture safety gloves, tests are carried out to determine the behaviour of the materials when confronted with the various families of chemical products.

The tests measure: > The permeation time for a given chemical product, i.e. the time taken for the chemical to penetrate the glove, at a molecular level. In some cases, there is no visible deterioration of the glove. > The degradation index of the glove in contact with a given chemical product, i.e. the degree of deterioration of the glove, shown by an alteration of its physical properties (e.g. softening, hardening, etc.).

Mapa Professional takes these different parameters into account to determine the relative performance of the different families of gloves, and hence help you to make the best possible choice.

A

for the job in hand, there is a Mapa glove

Specific polymers**

●

[ethyl acetate 99%]

www.mapa-pro.com

●●

FLUOROELASTOMER

●●●

[acetone 100%]

Chemical hazards are not confined to the chemical industry. Many people, in a variety of sectors, are faced with chemical risks when handling more of less aggressive products (oils, acids, solvents, etc).

●

BUTYL

Optimal protection

●●

[methanol 100%]

12

●

•••

[sodium hydroxide (soda) 40%] [sulphuric acid 96%]

●

● ●

●●

●●

13 ● ●

● ●

●●● ●●● ●●

SOME COMMON PRODUCTS

Butoxy-2-propanol 100%

5131-66-8

Acetic acid 10%

64-19-7

Benzene 99%

71-43-2

●●

Cutting, lubricating or hydraulic oils

●

Methyl methacrylate 100%

80-62-6

Methyl Ethyl Ketone [butanone) (MEK) 100%]

78-93-3

●

N,n-dimethylacetamide 99%

127-19-5

●

Methyl tert-butyl ether (MTBE) 100%

1634-04-4

2,4-Toluene diisocyanate (TDI) 100%

584-84-9

* The most frequently used materials for chemical protection gloves. ** This target protection against certain families of aggressive chemicals. They are generally more expensive than common materials.

●

●●●

●●● ●

• Value for money STRENGTHS • Mechanical resistance

RESTRICTIONS

• Not suitable for handling hot parts

●●●

● ●

●●●

• Excellent flexibility • Good puncture and tearing resistance • Suitable for cold environments

• Good puncture and abrasion resistance • No risk of proteinrelated allergies

• Risk of allergies caused by the proteins in the natural latex

• Not recommended • Poor mechanical for cold environments properties

• Good flexibility • Good thermal resistance

●●●

• E xcellent chemical resistance • F lexible and elastic

• High chemical resistance

•P oor mechanical properties

• Not suitable for use in Ketones

Mapa Professional Catalog - www.mapa-pro.com

Chemical Protection

Chemical Protection

STEP 3

NITRILE WEAR TIME

GLOVE

DESCRIPTION

Fingertip precision for light chemical protection and food handling

14

SIZE

6 7 8 9 10

LENGTH/ THICKNESS

12 in (31 cm) / .008 in (8 mil)

INTERIOR/ EXTERIOR STANDARDS FINISH

Chlorinated/ pebbled

CAT 3

OPTINIT 472 lus xc iv

e

E

3001

Maximum comfort for standard chemical protection

Te

ch nology

7 8 9 10 11

14 in (35.5 cm) / (0.85 mm) Medium Weight

Mapa technology textile support/ embossed texture

Good sensitivity for standard chemical protection

STANSOLV AF-15

12 in (30cm) / .015 in (15 mil) (0.38 mm)

X1XXXX

4101

7 8

Good mechanical resistance and long-lasting chemical protection

JKL

CAT 3

9 10 11 12.5 in (32 cm) / .015 in (15 mil) (0.38 mm)

Flocked/ embossed texture

4101

AJKL

CAT 3

Light weight for standard chemical protection

13 in (33 cm) / .018 in (18 mil) (0.46 mm)

4101

JKL

CAT 3

STANSOLV AF-18

STANSOLV A-10

AJKL

CAT 3

STANSOLV AK-22

STANSOLV AF-492

3121

The chemical protection of nitrile combined with excellent mechanical resistance

13 in (33 cm) / .011 in (11 mil) (0.28 mm)

Chlorinated/ embossed texture

9 10 11 13 in (33 cm) / .015 in (15 mil) (0.38 mm)

Chlorinated/ non-slip grip

4101

CAT 3

STANSOLV A-15 Medium Weight green Nitrile chemical resistant gloves

STANSOLV A-490

A

for the job in hand, there is a Mapa glove

Automotive/mechanical industry: - Assembly of small oily parts - Assembly of small, oil and grease free parts Chemical industry: - Common handling tasks - Handling and transporting chemicals (solvents) - Machine maintenance

12.5 in (32 cm) / .015 in (15 mil) (0.38 mm)

Chlorinated/ embossed texture

3101

JKL

CAT 3

Automotive/mechanical industry: - Automotive assembly - Handling oily mechanical parts - Part degreasing Chemical industry: - Handling and transporting chemicals (solvents) Food industry: - Food handling and preparation Mechanical industry: - Assembly of small oily parts - Chemical treatment of metals - Etching / degreasing

GLOVE

DESCRIPTION

SIZE

8 9 10 11

LENGTH/ THICKNESS

15.5 in (39 cm) / .022 in (22 mil) (0.56 mm)

INTERIOR/ EXTERIOR STANDARDS FINISH

Unique Z-pattern grip provide secure handling of hard-to-grasp items

Flocked/ embossed texture

STANSOL A-14

14 in (35.5 cm) / .022 in (22 mil) (0.55 mm) 7 8 11

Ultra-long chemical protection

4102

Chlorinated/ embossed texture

9 10

18 in (46 cm) / .022 in (22 mil) (0.55 mm)

STANSOL A-18

APPLICATIONS

Automotive/mechanical industry: - Treating/degreasing metals with aggressive solvents Chemical industry: - Handling drums of chemical products Other industries: - Application of pesticides - Cleaning of printing-press rollers - Maintenance - Timber treatment and finishing

STANSOL AF-493

Chemical industry: - Cleaning tanks - Handling and transporting chemicals (solvents) Machanical industries: - Assembly of small, oil and grease free parts - Chemical treatment of metals - Maintenance in wet environments (water, oil, greases, hydrocarbons) Automotive/mechanical industry: - Machining parts using cutting oil - Treating/degreasing metals with solvents Chemical industry: - Manufacture and application of paints and varnishes Other industries: - Application of pesticides - Cleaning of printing-press rollers

WEAR TIME

Ultra-long chemical protection

Automotive/mechanical industry: - Automotive assembly - Part degreasing - Surface treatment Chemical industry: - Chemical product blending - Handling drums of chemical products - Manipulating valves Other industries: - Laboratory tests - Machine maintenance

Automotive/mechanical industry: - Assembly of small oily parts - Handling oily mechanical parts - Surface treatment

3001

RISK

Construction industry: - Handling PVC-based glues - Preparing coatings, varnishes Food industry: - Food handling - Food preparation Mechanical industries: - Assembly of small oily parts - Machining parts using cutting oil - Precision assembly

CAT 3

6 7 8 Excellent comfort and dexterity despite the high mechanical strength

APPLICATIONS

AJKL

CAT 3

Automotive/mechanical industry: - Treating/degreasing metals with aggressive solvents Chemical industry: - Handling drums of chemical products Mechanical industries: - Etching / degreasing - Application of pesticides - Cleaning of printing-press rollers - Maintenance -Timber treatment and finishing Automotive/mechanical industry: - Treating/degreasing metals with aggressive solvents Chemical industry: - Handling drums of chemical products Mechanical industries: - Application of pesticides - Cleaning of printing-press rollers - Maintenance -Timber treatment and finishing

PERFORMANCE INDICATORS > THE RISK: combination between contact time and the aggressiveness of the chemical being handled.

Choose the performance of your gloves based on the type of risk:

SPLASH-PROTECTION

FREQUENT CONTACT

PROLONGED CONTACT (even in immersion)

> WEAR TIME: identifies the comfort level required by the operator.

The longer the wear time, the more comfortable the glove needs to be (perspiration, flexibility/fatigue).

SHORT-TERM USE CONTINUOUS USE

(chlorinated interior finish) (textile support) INTERMITTENT USE ULTRA COMFORT

(flocked interior finish) (Exclusive MAPA Technology for increased flexibility)

Mechanical industry: - Assembly of small oily and grease free parts - Machining parts using cutting oil - Precision assembly Other industries: - Food Industry - Spray-painting

Mapa Professional Catalog - www.mapa-pro.com

15

Chemical Protection

RISK

STEP 3

NATURAL RUBBER GLOVE

DESCRIPTION

SIZE

LENGTH/ THICKNESS

MATERIAL/ INT. FINISH/ EXT. FINISH

Excellent choice 6 7 8 for light chemical 9 10 protection

13 in (33 cm)

STANDARDS

Nitrile/Natural Rubber 2120

/ .026 in (26 mil) (66 mm)

Flocked/ embossed texture

AFR-282

GLOVE

DESCRIPTION

SIZE

LENGTH/ THICKNESS

Excellent choice for light chemical protection

6 7 8

13 in (33 cm) / .028 in

9 10

(28 mil) (1.5 mm)

MATERIAL/ INT. FINISH/ EXT. FINISH

CAT 3

APPLICATIONS

Aeronautics industry: - Work with composite materials (resins) Automotive/mechanical industry: - Spray-painting Local Authorities (Cleaning): - Handling household detergents Other industries: - Cleaning and general maintenance in wet environments

NS-53

CAT 3

Fine touch for light chemical protection

8 9 10 11

12.5 in (32 cm) / .023 in (23 mil) (.60 mm)

2011

415

new

Natural Rubber 7 8 9 10 11

12.6 in (32 cm) / .031 in (31 mil) (.8 mm)

Flocked/ embossed texture, chlorinated

2120

AKL

CAT 3

260

9 10

/ .040 in

11

(40 mil) (1 mm)

Natural Rubber 2131

ABKL

Chlorinated/ smooth CAT 3

286

Tactile sensitivity for light chemical protection

Extra long length provides added protection to the forearm

Chemical industry: - Chemical product blending - Cleaning tanks Petroleum industry: - Handling Other industries: - Cleaning and general maintenance in wet environments

23 in (59 cm) 9 10

/ .035 in

11

(35 mil) (88 mm)

Natural Rubber Smooth chlorinated/ smooth

2131

ABKL

PERFORMANCE INDICATORS

TECHNIC

Extremely supple with freedom NS-420 of movement for standard chemical protection

FREQUENT CONTACT

Neoprene/ Natural Rubber Flocked/ embossed texture

Aeronautics industry: - Work with composite materials (resins) Automotive/mechanical industry: - Spray-painting Other industries: - Industrial cleaning, maintenance

11

Aeronautics industry: - Work with composite materials (resins) Automotive/mechanical industry: - Spray-painting Other industries: - Industrial cleaning, maintenance

2121

CAT 3

12.1 in (31.8 cm) / .030 in (30 mil) (.76 mm)

9 10

3121

AJKL

CAT 3

6 7 8 9 10 11

16 in (41 cm) / .030 in

3121

(30 mil) (.76 mm)

AJKL

CAT 3

NS-450

Aeronautics industry: - Electric accumulator and battery manufacturing Chemistry industry: - Handling, loading and unloading of chemicals Other industries: - Industrial cleaning, maintenance - Preparation of industrial glues - Spreading fertilizer Aeronautics industry: - Electric accumulator and battery manufacturing Chemistry industry: - Handling, loading and unloading of chemicals Other industries: - Industrial cleaning, maintenance - Preparation of industrial glues - Spreading fertilizer

PVC RISK

WEAR TIME

GLOVE

DESCRIPTION

> THE RISK: combination between contact time and the aggressiveness of the chemical being handled.

Choose the performance of your gloves based on the type of risk:

9 10

6 7 8

Chemical industry: - Chemical product blending - Cleaning tanks Other industries: - Application of pesticides - Spreading fertilizer

287

SPLASH-PROTECTION

12.5 in (32 cm) / .022 in (21 mil) (.56 mm)

6 7 8

NS-401

TRIDENT

CAT 3

TECHNIC

18 in (46 cm)

AKL

17

TECHNIC

Aeronautics industry: - Work with composite materials (resins) Chemical industry: - Common handling Tasks - Resin and adhesive manufacturing - Resin-working Other industries: - Maintenance in wet environments

TRIDENT Excellent mechanical performance for long-lasting chemical protection

APPLICATIONS

Aeronautics industry: - Work with composite materials (resins) Automotive/mechanical industry: - Spray-painting

2120

TECHNI-MIX

ALTO PLUS A good choice when dexterity and chemical protection is needed for extended wear

STANDARDS

TWO-TONE

PROTECTOR

16

WEAR TIME

Hand-specific, curved-finger design for low hand fatigue, excellent fit.

SIZE

LENGTH/ THICKNESS

10.5 in (26.7 cm) 8 9

/ .020 in (20 mil) (.50 mm)

MATERIAL/ INT. FINISH/ EXT. FINISH FINISH

STANDARDS

APPLICATIONS

Automotive/mechanical industry: - Assembly of small parts Mechanical industry: - Precision assembly Other industries: - Biotechnology - Wood working

PVC 4121 Powdered/ smooth

V-20

PROLONGED CONTACT (even in immersion)

Long-lasting mechanical protection against low risk of chemical hazards

> WEAR TIME: identifies the comfort level required by the operator.

The longer the wear time, the more comfortable the glove needs to be (perspiration, flexibility/fatigue).

SHORT-TERM USE CONTINUOUS USE

(chlorinated interior finish) (textile support)

4121

AKL

CAT 3 PVC

Mapa Professional Catalog - www.mapa-pro.com

Comfort, flexibility and mechanical protection for low chemical hazards

TELBLUE 351 A

13.75 in (35 cm) / Heavy Weight (1.3 mm)

TELSOL 361

INTERMITTENT USE ULTRA COMFORT

(flocked interior finish) (Exclusive MAPA Technology for increased flexibility)

for the job in hand, there is a Mapa glove

9 10

Petrochemical industry: - Maintenance and handling Chemical industry: - Handling drums of chemical products Other industries: - Cleaning and general maintenance in wet environments

Textile support/ pebbled 8 9 10

12 in (30 cm) / Heavy Weight (1.5 mm)

4121

AKL

CAT 3

Mechanical industry: - Maintenance work in wet environments Pharmaceutical industry: - Maintenance and cleaning Other industries: - Servicing and maintenance work in wet environments

Mapa Professional Catalog - www.mapa-pro.com

Chemical Protection

RISK

WEAR TIME

RISK

NEOPRENE GLOVE

DESCRIPTION

SIZE

6 7

18 STANZOIL NL-34

Excellent chemical resistance with enhanced rough grip

8 9

LENGTH/ THICKNESS

INTERIOR/ EXTERIOR FINISH

3121

12 in (30.5 cm) /

ACJKL

Medium Weight X1XXXX Textile support/ non-slip grip

8 9

3121

14 in (35.5 cm) / Medium Weight

ACJKL

X2XXXX

STANZOIL NL-52

WEAR TIME

GLOVE

DESCRIPTION

Chemical industry: - Handling and transporting chemicals Mechanical industry: - Maintenance in wet environments (water, oil, greases, hydrocarbons) Petroleum industry: - Handling

e

Maximum comfort for standard chemical protection

Te

7 8 9 10 11

14 in (35.5 cm) / 0.30 in (30 mil) (0.9 mm)

Mapa technology textile support/ embossed texture

3121

ACKL

X1XXXX CAT 3

STANZOIL NK-22

Comfort and high-level chemical protection

8 9 10 11

14 in (35.5 cm) / Heavy Weight (1.35 mm)

Textile support/ pebbled

3121

ABCJKL

X1XXXX

CHEMZOIL NL-339

CAT 3

SIZE

78 9 10

BUTOFLEX 651

Chemical industry: - Handling and transporting chemicals Mechanical industry: - Etching / degreasing Petroleum industry: - Handling

lus xc iv

ch nology

78

Tactile sensitivity with wear8 9 10 indicator

9 10

14 in (35.5 cm) / 0.030 in (30 mil) (0.76 mm)

FLUOTEX 344

CHEM-PLY N-440

11

18 in (46 cm) / 0.022 in (22 mil) (0.56 mm)

CHEM-PLY N-730

18 in (46 cm) / 0.030 in (30 mil) (0.76 mm)

CHEM-PLY N-740

Chlorinated/ embossed texture

3112

ABCJKL

CAT 3

CHEM-PLY N-540

Smooth/ embossed texture

19

ABCIKL

Chemical industry: - Formulating paints, varnishes, resins and inks - Handling and repackaging chemicals - Sampling chemicals Cosmetics and pharmaceutical industry: - Handling in laboratories Mechanical and electronic industry: - Metal treatment and degreasing

14 in (35 cm) / Medium Weight (1.5 mm)

1122 Mapa technology textile support/ embossed texture

12 in (30 cm) Fluoroelastomer / .020 in (20 mil) Chlorinated/ (0.5 mm) smooth

ABCIKL

CAT 3 Mechanical industry: - Metal degreasing and etching Chemical industry: - Manufacturing paints and varnishes - Chemical treatments (solvents) - Galvanoplasty - Resin and adhesive manufacturing - Handling and transporting chemicals (solvents) Other industries: - Printing - Petrochemical refining - Site pollution control

4102

ADE FGJKL

Mechanical industry: - Metal degreasing and etching Chemical industry: - Manufacturing paints and varnishes - Chemical treatments (solvents) - Galvanoplasty - Resin and adhesive manufacturing - Handling and transporting chemicals (solvents) Other industries: - Printing - Petrochemical refining - Site pollution control - Emergency interventions on chemical accidents

4241

Comfort and flexibility for extended wear

9 10

0111

CAT 3

CHEM-PLY N-360

14 in (35.5 cm) / 0.040 in (40 mil) (1.01 mm)

Butyl

Mechanical industry: - Surface treatment of metals (acids) - Etching / degreasing Chemical industry: - Handling on alkylation units - Galvanoplasty -H andling and transporting drums of chemical products - Site pollution control

APPLICATIONS

FLUONIT 468

14 in (35.5 cm) / 0.022 in (22 mil) (0.56 mm)

Ultra-high performance chemical protection

STANDARDS

Butyl

BUTOFLEX 650

Mechanical industry: -S urface treatment of metals (acids) Chemical industry: - Handling on alkylation units - Hot, petrochemical product sampling - Resin-working -H andling and transporting drums of chemical products - Site pollution control

14 in (35 cm) / .020 in (20 mil) (0.5 mm)

MATERIAL/ INT. FINISH/ EXT. FINISH

CAT 3

9 10

Automotive/mechanical industry: - Engine part assembly - Surface treatment Chemical industry: - Chemical product blending - Handling drums of chemical products - Manipulating valves Other industries: - Laboratory tests - Machine maintenance

LENGTH/ THICKNESS

Ultimate specific chemical resistance

CAT 3

lus xc iv

ch nology

RISK

Te

11

CAT 3

APPLICATIONS

e

10

E

STANDARDS

Chemical Protection

WEAR TIME

E

RISK

BUTYL/FLUOROELASTOMER

14 in (37 cm) Fluoroelastomer / Heavy Weight Textile support/ (1.5 mm) smooth

ACDE FGJKL

X1XXXX CAT 3

PERFORMANCE INDICATORS > THE RISK: combination between contact time and the aggressiveness of the chemical being handled.

Choose the performance of your gloves based on the type of risk:

SPLASH-PROTECTION

FREQUENT CONTACT

PROLONGED CONTACT (even in immersion)

> WEAR TIME: identifies the comfort level required by the operator.

The longer the wear time, the more comfortable the glove needs to be (perspiration, flexibility/fatigue).

SHORT-TERM USE CONTINUOUS USE

(chlorinated interior finish) (textile support) INTERMITTENT USE ULTRA COMFORT

(flocked interior finish) (Exclusive MAPA Technology for increased flexibility)

A

for the job in hand, there is a Mapa glove

Mapa Professional Catalog - www.mapa-pro.com

Handling Protection

SERVICE LIFE

GLOVE

DESCRIPTION

PRECISION WORK

Optimal dexterity and sensitivity for light protection

SIZE

6789 10 11

LENGTH

INTERIOR/EXTERIOR FINISH

8.5-10 in (depending on size) (24-28 cm)

STANDARDS

3131 CAT 2

ULTRANE 548

20

ULTRANE 551

6789 10 11

8-10.5 in (depending on size) (21-28 cm)

6 7Â 8 9 10

8.25-10.25 in (21-27 cm) Depending on size Light Weight

678 9 10

8.25-10.25 in (depending on size) (21-26 cm) Light Weight

Unbeatable for fingertip precision

The Mapa Professional Handling Protection range provides the comfort and protection hands require to carry out a wide variety of work.

We suggest that you select your gloves for precision work based on their service life in order to make your choice easier:

THE ENVIRONMENT: Select the glove that meets your needs according to your > working environment:

ULTRANE 554

PRECISION WORK

PERFORMANCE INDICATORS

ULTRANE 550

4131 CAT 2

DRY and OILY and RELATIVELY CLEAN environments VERY DIRTY environments ULTRANE 500 GRIP & PROOF GRIP & PROOF

> 1 >> 2 >>> 3

3 GIVING THE MOST PROTECTION

Grip assured, skin protected and unbeatable fingertip sensitivity for slightly oily and dirty environements

GRIP & PROOF

4121 CAT 2

9.-11 in (depending on size) (23-28 cm) Light Weight

HEAVY-DUTY WORK

21

Seamless knitted lining / 3/4 nitrile coating

Seamless knitted lining / full nitrile coating

Automotive/ mechanical industry: --Handling mechanical parts --Precision mechanical work Construction industry: --Woodwork --Sanding --Construction material handling

Knit Liner with nitrile palm & finger coating / textile support / smooth

Automotive/mechanical industry: - Precision mechanical work - Part assembly - Sanding - Handling mechanical parts Other industries: - Manufacturing small electrical components - Construction materials handling

789 10 11

Grip assured, skin protected and unbeatable fingertip new sensitivity for precision handling in ULTRANE 526 very oily environments

Comfort and dexterity for common handling tasks

7 8 9 10

9.5-12 in (24–31 cm) Light Weight

Automotive/mechanical industry: - Intricate assembly - Screwing and bolting - Precision assembly - Sorting small parts - Machining non-sharp parts beneath the pad Other industries: - Light maintenance work - Light handling in the storage area - Packing activities Automotive / mechanical industry: --Precision mechanical work --Light metal fabrication --Handling mechanical parts --Quality control Other industries: --Assembly of white goods --General site and factory maintenance --Construction material handling

GRIP & PROOF

A

Automotive/mechanical industry: - Intricate assembly - Sorting small parts - Fitting small screws and fasteners Electronics: - Electrical component assembly - Microprocessor handling - High-frequency antennae riveting Cosmetics and pharmaceutical industry: - Medicine manufacturing - Cosmetics preparation

Automotive/mechanical industry: - Sorting small parts - Screwing and bolting - Pump manufacturing - Precision assembly Other industries: - Packaging - Minor maintenance Tasks - Light handling in storage areas

Palm coated Foam Nitrile / seamless textile support / ventilated back

Seamless knitted lining / nitrile coating on palm and fingers

6789 10 11

Grip assured, skin protected and unbeatable fingertip new sensitivity for handling precision in oily ULTRANE 525 environments

GRIP & PROOF

for the job in hand, there is a Mapa glove

Automotive/mechanical industry: - Intricate assembly - Sorting small parts - Fitting small screws and fasteners Electronics: - Assembly of electrical components - Microprocessor handling Cosmetics and pharmaceutical industry: - Medicine manufacturing - Cosmetics preparation

ULTRANE 546 GRIP & PROOF

> THE SERVICE LIFE of a glove for precision work is directly linked to the thickness of the polymer layer covering the fabric and the nature of the fabric, in a given environment.

Unbeatable for fingertip precision in dirty and oily environments

Seamless textile support/ventilated back

APPLICATIONS

Handling Protection

ENVIRONMENT

4121 CAT 2

GPA 397

Mapa Professional Catalog - www.mapa-pro.com

ENVIRONMENT

RISK

SERVICE LIFE

GLOVE

DESCRIPTION

SIZE

LENGTH

PRECISION WORK - THE KRY RANGE KRYTECH

INTERIOR/ EXTERIOR FINISH

STANDARDS

579LC 10.5-12.5 in Moderate protection for very intricate handling in reasonably clean environments

22

(27-32 cm)

EN388

8.50 in

ISO 13997: 520g (5.2 N)

(22-27 cm)

CAT 2

4343

579

The Mapa Professional range of cut-protection gloves provides excellent hand comfort and protection specially designed for various types of work involving cut hazards.

Seamless textile support from HDPE fibers/ Polyurethane on palm and fingers

6 7 8 9

KRYTECH

10 11

557R

EN388 Standard protection for intricate handling in reasonably clean environments

YOUR NEED

8.75-10.5 in

4343

(22-27 cm)

ISO 13997: 510g (5.1 N)

Select your cut protection gloves according to your specific needs.

For precision work, you need gloves that act like a second skin, protecting against cuts but maintaining excellent dexterity. > THE ENVIRONMENT: Select the glove that meets your needs according to your working environment:

CAT 2

557

EN388

DRY and RELATIVELY CLEAN environments

OILY and VERY DIRTY environments

Cut,Grip and dexterity for dry and slightly oily environments

> THE RISK: The higher the level of performance, the greater the glove’s resistance to the combined effects of the sharpness of the object’s cutting edge and the pressure applied.

MODERATE RISK

HIGH RISK

VERY HIGH RISK

7 8 9

9-10 in

10 11

(23-28 cm)

EN388 High-performance protection for intricate handling in reasonably clean environments

6 7 8 9

8.5-11 in

10 11

(22-28 cm)

KRYTECH 576

VERSION 2005

LEVELS

LEVELS

Weight (grams) needed to cut through material with 25 mm of blade travel

A1

≥200

0

<200

≥500

1

≥200

A3

≥1000

2

≥500

A4

≥1500

3

≥1000

A5

≥2200

4

≥1500

A6

≥3000

5

≥3500

A7

≥4000

A8

≥5000

A9

≥6000

A2

A

for the job in hand, there is a Mapa glove

4543 ISO 13997: 1900g (19 N) Seamless textile support from HDPE fibers/ ventilated back/ polyurethane on palm and fingers

ANSI-ISO 105 CLASSIFICATION FOR CUT RESISTANCE (ASTM TESTING) Weight (grams) needed to cut through material with 20 mm of blade travel

4343 ISO 13997: 720g (7.2 N)

KRYNIT 588

> 1 >> 2 >>> 3 3 GIVING THE MOST PROTECTION

VERSION 2016

Seamless textile support from HDPE fibers/foam nitrile coating on palm and fingers

CAT 2

> THE SERVICE LIFE of a glove for precision work is directly linked to the thickness of the polymer layer covering the fabric and the nature of the fabric, in a given environment.

IMPORTANT: Using cut-protection gloves does not guarantee total protection (for instance, when using a motoroperated sharp object). Furthermore, the EN 388 and ISO 13997 test results give no more than an indicative average value, and an on-site study may be recommended to determine the most appropriate type of protection for a workstation.

Do not hesitate to contact our technical department for further information.

APPLICATIONS

High-performance protection for intricate handling in reasonably clean environments

6 7 8 9

9.5-11.75 in

10 11

(24-30 cm)

CAT 2

EN388

4543 ISO 13997: 1800g (18 N) CAT 2

KRYTECH 586

EN388 Very high level of protection with no compromise on dexterity

NOTE: All MAPA gloves/sleeves are tested with blade traveling 0.8” (20 mm-new method).

KRYTECH MAX 596

7 8 9

9.5-11 in

10 11

(24-28 cm)

Textile support Mapa Technology /ventilated back

4543 ISO 13997 : 3800g (38 N) CAT 2

Automotive/mechanical industry: - Assembling thin metal sheets - Automotive assembly - Finishing work - Handling and sorting small, sharp parts - Handling untrimmed parts or sheet metal - Precision assembly Paper industry: - Handling cardboard and paper

Automotive/mechanical industry: - Handling and sorting small, sharp parts Construction industry • (Carpentry/Joinery): - Assembly - Installing steel structures - Screwing • (Heating engineers/Plumbers): - Handling metal parts • (Roofers/Tilers/Glazers): - Handling and laying tiles, inserts, frames or zinc sheeting Paper industry: - Handling cardboard and paper Automotive/mechanical industry: - Handling and sorting small, sharp parts - Handling oily mechanical parts - Handling sheet metal - Cutting and stamping metal - Maintenance in wet environments (water, oil, greases, hydrocarbons) Glass industry: - Handling glass sheets Other industries: - Maintenance

Automotive/mechanical industry: - Assembly of thin metal sheets - F inishing sharp parts - Handling metal parts Construction industry (Roofers/Tilers/Glazers): - Handling and fitting windows Local Authorities (Technical Maintenance): - Maintenance work with risk of cuts Plastics industry: - Post-injection material removal

Automotive/mechanical industry: - Assembling thin metal sheets - Finishing work on sharp-edged parts - Handling metal parts Construction industry (Roofers/Tilers/Glazers): - Handling and fitting windows Local authorities (Site visits): - Maintenance work with risk of cuts Plastics industry: - Post-injection material removal

Automotive/mechanical industry: - Assembly of thin metal sheets - Finishing sharp parts - Handling metal parts - Metal rolling, stamping and assembly - Metal working Glass industry: - Handling sheet glass Mechanical industry: - Cutting and stamping metal

Mapa Professional Catalog - www.mapa-pro.com

23

Cut Protection

Cut Protection

Cut Protection PRECISION WORK - THE KRY RANGE ENVIRONMENT

RISK

SERVICE LIFE

GLOVE

DESCRIPTION

SIZE

LENGTH

INTERIOR/ EXTERIOR FINISH

STANDARDS

Seamless textile support from HDPE fibers/nitrile coating on palm and fingers

Automotive/mechanical industry: --Handling and sorting small, sharp parts --Handling oily mechanical parts --Handling sheet metal --Machining parts using cutting oil Glass industry: --Handling glass sheets Mechanical industry: --Cutting and stamping metal --Maintenance in wet environments (water, oil, greases, hydrocarbons) Other industries: --Maintenance in wet environments

Seamless textile support from HDPE fibers/3/4 nitrile coating

Automotive and mechanical industry: --Engine part assembly -- Handling and sorting small, sharp parts --Handling oily mechanical parts --Handling sheet metal --Handling untrimmed parts or sheet metal --Machining parts using cutting oil --Screwing and bolting Mechanical industry: --Cutting and stamping metal --Maintenance in wet environments (water, oil, greases, hydrocarbons)

GRIP & PROOF

24

Cut, Grip and Skin Protection for oily environments

The Mapa Professional range of cut-protection gloves provides excellent hand comfort and protection specially designed for various types of work involving cut hazards.

KRYNIT 580 GRIP & PROOF

Select your cut protection gloves according to your specific needs.

For precision work, you need gloves that act like a second skin, protecting against cuts but maintaining excellent dexterity.

DRY and RELATIVELY CLEAN environments

OILY and VERY DIRTY environments

EN388

new

> THE ENVIRONMENT: Select the glove that meets your needs according to your working environment:

MODERATE RISK

HIGH RISK

7 8 9 10

new

Seamless textile support from HDPE fibers/full nitrile coating

Automotive/mechanical industry: --Bodywork assembly - Handling and sorting small, sharp parts - Machining parts using cutting oil --Pump manufacturing Mechanical industry: --Cutting and stamping metal --Maintenance in wet environments (water, oil, greases, hydrocarbons) --Precision assembly Other industries: --Glass working --Machine maintenance

9-10 in (23-28 cm)

Seamless textile support from HDPE fibers/nitrile coating on palm and fingers

Automotive/mechanical industry: --Assembly of thin metal sheets --Finishing sharp parts --Handling metal parts --Metal rolling, stamping and assembly --Metal working Glass industry: --Handling glass sheets Mechanical industry: --Cutting and stamping metal --Handling sharp sheet metal

KRYNIT 600 GRIP & PROOF GRIP & PROOF

Nitrile Grip & Proof coating provide excellent grip and liquidproof protection

IMPORTANT: Using cut-protection gloves does not guarantee total protection (for instance, when using a motoroperated sharp object). Furthermore, the EN 388 and ISO 13997 test results give no more than an indicative average value, and an on-site study may be recommended to determine the most appropriate type of protection for a workstation.

Do not hesitate to contact our technical department for further information.

7 8 9 10 11

EN388

KRYNIT 581 GRIP & PROOF

ANSI-ISO 105 CLASSIFICATION FOR CUT RESISTANCE (ASTM TESTING)

4543

VERSION 2005

LEVELS

Weight (grams) needed to cut through material with 20 mm of blade travel

LEVELS

Weight (grams) needed to cut through material with 25 mm of blade travel

A1

≥200

0

<200

A2

≥500

1

≥200

A3

≥1000

2

≥500

A4

≥1500

3

≥1000

A5

≥2200

4

≥1500

A6

≥3000

5

≥3500

A7

≥4000

A8

≥5000

A9

≥6000

A

700g (7 N) CAT 2

Cut, Grip and Skin protection for very oily environments

> THE SERVICE LIFE of a glove for precision work is directly linked to the thickness of the polymer layer covering the fabric and the nature of the fabric, in a given environment.

VERSION 2016

4343 ISO 13997:

GRIP & PROOF

VERY HIGH RISK

> 1 >> 2 >>> 3 3 GIVING THE MOST PROTECTION

Cut, Grip and Skin Protection up to knuckle in oily environments.

Unbeatable fingertip sensitivity.

KRYNIT 599 GRIP & PROOF

> THE RISK: The higher the level of performance, the greater the glove’s resistance to the combined effects of the sharpness of the object’s cutting edge and the pressure applied.

for the job in hand, there is a Mapa glove

7 8 9 10 11

GRIP & PROOF

YOUR NEED

APPLICATIONS

GRIP & PROOF

Special Grip & Proof nitrile coating provides better liquidproofness and grip in oily situations

KRYNIT 582 GRIP & PROOF

7 8 9 10 11

Seamless textile support from HDPE fibers/3/4 nitrile coating

ISO 13997: Automotive/mechanical industry: 1910g (19.1 N) --Assembly of thin metal sheets CAT 2 --Finishing sharp parts --Handling metal parts --Metal rolling, stamping and assembly --Metal working Glass industry: --Handling glass sheets Mechanical industry: --Cutting and stamping metal

NOTE: All MAPA gloves/sleeves are tested with blade traveling 0.8” (20 mm-new method).

Mapa Professional Catalog - www.mapa-pro.com

25

Cut Protection

ENVIRONMENT

RISK

GLOVES SERVICE LIFE

GLOVE

DESCRIPTION

SIZE

LENGTH

PRECISION WORK - THE KRY RANGE

Dexterity and resistance to cuts for optimised thermal protection

26

7 9 11

9-11 in (23-28 cm)

EXONIT PLUS 530

The Mapa Professional range of cut-protection gloves and sleeves provide excellent arm comfort and protection specially designed for various types of work involving cut hazards.

Cut, Grip, Impact and Skin Protection for oily environments

EXONIT GRIP AND PROOF 535

YOUR NEED Select your cut protection gloves according to your specific needs.

For precision work, you need gloves that act like a second skin, protecting against cuts but maintaining excellent dexterity.

OILY and VERY DIRTY environments

> THE RISK: The higher the level of performance, the greater the glove’s resistance to the combined effects of the sharpness of the object’s cutting edge and the pressure applied.

MODERATE RISK

HIGH RISK

Knitted Thermal/ aramide fiber liner with nitrile dots on palm/ fingers and TPR impact strips on back of hand/fingers.

Medium weight

STANDARDS

ISO 13997 : 970g (9.7 N)

4343 X2XXXX CAT 2

Seamless HDPE liner with nitrile grip & proof on palm/ fingers and TPR strips on back of hand/ fingers.

Medium weight

ISO 13997 : 671g (7N)

Seamless HDPE liner with TPR impact strips back of hand/fingers, nitrile grip and proof palm/ finger coating, Heavy weight.

ISO 13997: 1910g (19.1 N)

4343 CAT 2

9-11 in (23-28 cm)

Heavy duty cut with grip and proof coating, impact protection on back of hand and fingers.

> THE ENVIRONMENT: Select the glove that meets your needs according to your working environment: DRY and RELATIVELY CLEAN environments

7 8 9 10 11

INTERIOR/ EXTERIOR FINISH

EXONIT 547

ENVIRONMENT

RISK

SERVICE LIFE

GLOVE

DESCRIPTION

4543 CAT 2

LENGTH

INTERIOR/ EXTERIOR FINISH

STANDARDS

ISO 13997 : 760g (7.6 N) Comfortable fit and practical protection

18 in (45 cm) 334X CAT 2

KRYTECH ARM 532

IMPORTANT: Using cut-protection gloves does not guarantee total protection (for instance, when using a motoroperated sharp object). Furthermore, the EN 388 and ISO 13997 test results give no more than an indicative average value, and an on-site study may be recommended to determine the most appropriate type of protection for a workstation.

Do not hesitate to contact our technical department for further information.

ISO 13997 : 760g (7.6 N) Maximum comfort and practical protection

18 in (45 cm) 334X

ANSI-ISO 105 CLASSIFICATION FOR CUT RESISTANCE (ASTM TESTING)

CAT 2

KRYTECH ARM 539W

VERSION 2005

APPLICATIONS

Automotive/mechanical industry: - Assembly of thin metal sheets - Automotive assembly - Handling metals parts - Mechanical maintenance Mechanical industry

Automotive/mechanical industry: - Assembly of thin metal sheets - Automotive assembly - Handling metals parts - Mechanical maintenance Mechanical industry

Seamless textile support from HDPE fibers

LEVELS

Weight (grams) needed to cut through material with 20 mm of blade travel

LEVELS

Weight (grams) needed to cut through material with 25 mm of blade travel

A1

≥200

0

<200

A2

≥500

1

≥200

A3

≥1000

2

≥500

A4

≥1500

3

≥1000

A5

≥2200

4

≥1500

454X

A6

≥3000

5

≥3500

CAT 2

A7

≥4000

A8

≥5000

A9

≥6000

A

Construction industry (Metalworkers/ Locksmiths): - Handling and installing metal structures Mechanical industry: - Cutting and stamping metal Petrochemical industry: - Maintenance and handling Petroleum industry: - Handling

VERY HIGH RISK

> 1 >> 2 >>> 3 3 GIVING THE MOST PROTECTION

for the job in hand, there is a Mapa glove

Mechanical industry: - Working with hot, sharp and oily parts Other industries: - Handling of hot piping - Handling of hot steel after welding - Handling of moulds in the ceramic industry Rubber industry: - Vulcanization, demoulding, forming, etc.

SLEEVES

> THE SERVICE LIFE of a glove for precision work is directly linked to the thickness of the polymer layer covering the fabric and the nature of the fabric, in a given environment.

VERSION 2016

APPLICATIONS

Ultra comfort and practical protection

24 in (60 cm) ISO 13997 : 1960g (19.6 N)

Automotive/mechanical industry: - Assembly of thin metal sheets - Handling sheet metal - Metal part assembly

KRYTECH ARM 538

Comfortable fit and practical protection

NOTE: All MAPA gloves/sleeves are tested with blade traveling 0.8” (20 mm-new method).

18 in (45 cm)

Automotive/mechanical industry: - Assembly of thin metal sheets - Handling sheet metal - Metal part assembly Glass industry: Other industries: Mechanical industry:

KRYTECH ARM 537

Mapa Professional Catalog - www.mapa-pro.com

27

Cut Protection

Cut Protective Gloves & Sleeves

CUT/IMPACT

Cut Protection ENVIRONMENT

RISK

SERVICE LIFE

GLOVE

DESCRIPTION

28

Excellent cut protection and resistance to wear with optimal dexterity and comfort. Extra long cuff for added forearm protection.

The Mapa Professional range of cut-protection gloves provides excellent hand comfort and protection specially designed for various types of work involving cut hazards.

SIZE

4543 7 8 9

9.5-10.5 in

10 11

(24-27 cm)

8 9

Seamless textile support from superior strength fibers/ Embossed textured Natural Rubber coating on palm

7 8 9 10

Combined long lasting chemical protection and cut protection.

12.50 in (32 cm)

Multi-layer technology: combination of superior strength fibers and nitrile/ Textile support

Weight (grams) needed to cut through material with 25 mm of blade travel

A1

≥200

0

<200

≥500

1

≥200

A3

≥1000

2

≥500

A4

≥1500

3

≥1000

A5

≥2200

4

≥1500

A6

≥3000

5

≥3500

A7

≥4000

A8

≥5000

A9

≥6000

A2

A

for the job in hand, there is a Mapa glove

JKL

Construction industry (Carpentry/Joinery): - Assembly - Cutting wood - Installing steel structures - Screwing - Studwork

Automotive/mechanical industry: - Metal rolling, stamping and assembly - Sheet metal - Cutting aluminium strips Other industries: - Collection and sorting of industrial and household waste

X2XXXX 8 9

ISO 13997 : 1460g

10

CAT 3 EN388

GRIP & PROOF

LEVELS

X2XXXX ISO 13997 : 2040g

Ceramic and plastics industry, composite industries: - Handling of composite materials after heat processing - Post-injection handling of hot plastic parts

4543

lusiv

e

xc

ANSI-ISO 105 CLASSIFICATION FOR CUT RESISTANCE (ASTM TESTING) Weight (grams) needed to cut through material with 20 mm of blade travel

3543

hnolo

KRONIT-PROOF 395

LEVELS

CAT 2

CAT 2

IMPORTANT: Using cut-protection gloves does not guarantee total protection (for instance, when using a motoroperated sharp object). Furthermore, the EN 388 and ISO 13997 test results give no more than an indicative average value, and an on-site study may be recommended to determine the most appropriate type of protection for a workstation.

Do not hesitate to contact our technical department for further information.

VERSION 2005

X1XXXX

Automotive/mechanical industry: - Handling untrimmed parts or sheet metal - Handling parts post-press - Handling sheet metal - Metal working - Cutting strips (plasma, etc.)

e gi

Te c

KROFLEX 840

> 1 >> 2 >>> 3 3 GIVING THE MOST PROTECTION

VERSION 2016

4542

new KRONIT 380 GRIP & PROOF

Best cut protective glove for heavy duty work in oily environments

9.5 in (24-26 cm)

Seamless textile support from HDPE and cotton fibers/ Nitrile Grip & proof coating on palm/ fingers with ventilated back.

EN 407

Automotive mechanical industry: - Handling parts post -press - Pressing metal, handling metal sheets

X1XXXX

Mechanical industry: - Metal stamping in very oily environments - Cutting and stamping metal

4344

ISO 13997 : 1070g

29

Mechanical industry: - Cutting and stamping work - Handling aluminium strips - Handling sharp sheet metal

ISO 13997 : 2010g

9 in

High protection for handling heavy or sharp objects in wet environments

E

> THE SERVICE LIFE of a glove for precision work is directly linked to the thickness of the polymer layer covering the fabric and the nature of the fabric, in a given environment.

Environment: - Sorting metal and plastic waste

(23-26 cm )

> THE RISK: The higher the level of performance, the greater the glove’s resistance to the combined effects of the sharpness of the object’s cutting edge and the pressure applied.

VERY HIGH RISK

Seamless textile support from superior strength fibers/ Leather layer on palm with reinforced thumb/index

10 11

KROMET 832

OILY and VERY DIRTY environments

HIGH RISK

X1XXXX CAT 2

> THE ENVIRONMENT: Select the glove that meets your needs according to your working environment:

Seamless HDPE fiber liner leather layer on palm with reinforced thumb/index.

APPLICATIONS

ISO 13997 : 2019g (20.1N)

Good protection for handling heavy and sharp metal parts in dry and slightly wet environments

Select your cut protection gloves according to your specific needs.

For precision work, you need gloves that act like a second skin, protecting against cuts but maintaining excellent dexterity.

MODERATE RISK

INTERIOR/ STANDARDS EXTERIOR FINISH

KROMET 836LC

YOUR NEED

DRY and RELATIVELY CLEAN environments

LENGTH

CAT 2

NOTE: All MAPA gloves/sleeves are tested with blade traveling 0.8” (20 mm-new method).

Mapa Professional Catalog - www.mapa-pro.com

Cut Protection

HEAVY-DUTY HANDLING - THE KRO RANGE

TEMPERATURE ENVIRONMENT

CONTACT TIME

GLOVE

DESCRIPTION

SIZE

LENGTH

30

MATERIAL/INT. FINISH/ EXT. FINISH

Seamless textile support/Nitrile coating with dot embossing on palm and fingers

High dexterity and thermal protection

STANDARDS

4111

X1XXXX CAT 2

The Mapa Professional Thermal Protection range provides excellent comfort and protection to hands whenever work situations require.

TEMP-DEX 710

9-11 in

11

(23-28 cm)

Seamless textile support from aramide fibers/ Nitrile coating with dot embossing on palm and fingers

Dexterity and resistance to cuts for optimized thermal protection

PERFORMANCE INDICATORS We suggest that you select your gloves based on three criteria in order to make your choice easier: > TEMPERATURE:

7 9

TEMP-DEX PLUS 720

4343

X2XXXX ISO 13997 970g CAT 2

PROTECTION AGAINST THE COLD -10 AND -30°C (14° AND -22° F) 2212 ACJKL Hygienic combined with effective thermal protection; 100% fluid-proof

STANDARD PROTECTION UP TO 150 °C (300° F)

9 11

17.71 in

12

(45 cm)

Nitrile/ Knitted thermal protection/ Embossed texture

111 02XXXX

HIGH-LEVEL PROTECTION ABOVE 150 °C (300° F) CAT 3

TEMP-COOK 476

> ENVIRONMENT: Select the glove that meets your needs according to your working environment: DRY environments

WET environments

Protection against heat and steam, along with inner polymer to protect against oils, greases and hydrocarbons

CHEMICAL environments

MODERATELY OILY environments

2332

9

12.5 in (32 cm)

Nitrile inner layer encased by knitted thermal liners / Knitted thermal protection

12X

X2XXXX

> CONTACT TIME: Performance depends on the contact time with the part at a given temperature. at 80 °C (176° F) at 100 °C (212°F) at 125 °C (257°F) SHORT CONTACT INTERMEDIATE CONTACT PROLONGED CONTACT

70 s

30 s

20 s

80 s

45 s

25 s

1 min 50

1 min

38 s

CAT 2

TEMP-PROOF 333

A double-layer glove, with thermal insulation and chemical resistance

14 in (35.5 cm) Neoprene / knitted thermal liner for added chemical and heat protection / pebbled grip

8 9 10

> 1 >> 2 >>> 3

Ceramics and plastics industries, composite industries: - Handling of composite materials after heat processing Construction industry (Heating engineers/Plumbers): - Maintenance of pipes and ducts Other industries: - Handling of hot piping - Handling of hot steel after welding - Handling of moulds in the ceramic industry - Handling of sheet metal after hot stamping Maximum recommended temperature: 125 °C

Rubber industry: - Vulcanization, demoulding, calendering, etc.

Mechanical industry: - Working with hot, sharp and oily parts Other industries: - Handling of hot piping - Handling of hot steel after welding - Handling of moulds in the ceramic industry - Handling of metals after heat treatment Maximum recommended temperature: 125 °C Bakeries: - Removing trays from ovens Catering industry: - Removing dishes from warming ovens - Removing hot dishes from ovens (wet or dry) - Removing objects from autoclaves or steam ovens Food industry: - Pre-cooking Local authorities (Catering): - Removing hot dishes from ovens (wet or dry) - Removing objects from autoclaves or steam ovens see Food Expert range

Maximum recommended temperature: 150 °C Mechanical industry: - Chemical treatment of metals - Oil quenching of steel Petrochemical industry: - Hot, petrochemical product sampling Rubber industry: - Vulcanization, demoulding, forming, etc.

Other industries: - Boiler room work - Handling of hot steel after welding - Heat treatment up to 250 °C (autoclaves, etc.)

- Steel quenching - Steam cleaning Maximum recommended temperature: 250 °C

TEMP-TEC NL-56

Take a look at the thermal insulation curves for all of our gloves at www.mapa-pro.com > SERVICE LIFE: Combination of material and thickness of gloves to give a service life from 1 to 3.

APPLICATIONS

A double-layer glove, with thermal insulation and extended length for extra arm protection.

17 in (43 cm)

2212 ACJKL

111 02XXXX CAT 3

Petrochemical industry: - Sampling of hot pstrochemical Mechanical industry: - Chemical treatment of metals - Oil quenching of steel Rubber industry: - Polymer extrusion Other industries: - Manufacture of insulating electric wires - Manufacture of adhesives - Handling of moulds in the ceramic industry - Handing of hot piping - Road works in cold conditions - Boiler room work - Steam cleaning

TEMP-TEC NL-517

3 GIVING THE MOST PROTECTION

A

for the job in hand, there is a Mapa glove

Mapa Professional Catalog - www.mapa-pro.com

31

Thermal Protection

Thermal Protection

Thermal Protection ENVIRONMENT

SERVICE LIFE

GLOVE

DESCRIPTION

SIZE

LENGTH

MATERIAL/INT. FINISH/ EXT. FINISH

STANDARDS

32 Reinforced Durability to push the limits of cold

7 8 9 10

-10°C

9.50 in (24 - 27 cm) Light Weight

Seamless knitted lining / ¾ Nitrile coating

3222

02X CAT 2

The Mapa Professional Thermal Protection range provides excellent comfort and protection to hands whenever work situations require.

APPLICATIONS

Ceramics and plastics industries, composite industries: - Handling of composite materials after heat processing Construction industry (Heating engineers/Plumbers): - Maintenance of pipes and ducts Other industries: - Handling of hot piping - Handling of hot steel after welding - Handling of moulds in the ceramic industry - Handling of sheet metal after hot stamping Maximum recommended temperature: 125 °C

TEMP-ICE 700

PERFORMANCE INDICATORS

Thermal insulation 100% liquidproof to protect from extreme contact cold

We suggest that you select your gloves based on three criteria in order to make your choice easier:

12 in 9 10

(30 cm) Heavy Weight

PVC/ Jersey support, lined with woolen fleece/Pebbled

> TEMPERATURE:

4221

121 CAT 3

Fishing and work at sea: - Handling produce Transport: -H andling of liquids at low temperatures (water, oil, hydrocarbons, etc.)

Other industries: -H andling in refrigerated or open-air warehouses - Maintenance in wet or cold environments

TEMP-SEA 770

PROTECTION AGAINST THE COLD -10 AND -30°C (14° AND -22° F)

STANDARD PROTECTION UP TO 150 °C (300° F)

HIGH-LEVEL PROTECTION ABOVE 150 °C (300° F) -30°C

> ENVIRONMENT: Select the glove that meets your needs according to your working environment: DRY environments

WET environments

Designed for use in extreme cold UGORIA 750 while perserving flexibility. Great solution for handling and maintenance in cold weather.

CHEMICAL environments

MODERATELY OILY environments

11 in 10

(28 cm)

11

Medium Weight

Fully coated PVC available with knit wrist or safety cuff / smooth finish

3121

011 CAT 2

Civil engineering: - Handling - Road maintenance Food industry: - Maintenance and work in cold stores Local authorities (Roads and Highways): - Maintaining the roads - Working during winter Petroleum industry: - Handling - Outdoor handling (valves, etc.)

Transport, logistics: - Goods handling on loading bays, docks, warehousing etc.

- Operating handling equipment - Order preparation Maximum recommended temperature: 150 °C

> CONTACT TIME: Performance depends on the contact time with the part at a given temperature.

UGORIA 751

at 80 °C (176°F) at 100 °C (212°F) at 125 °C (257°F) SHORT CONTACT

70 s

30 s

20 s

INTERMEDIATE CONTACT

80 s

45 s

25 s

1 min 50

1 min

38 s

PROLONGED CONTACT

Take a look at the thermal insulation curves for all of our gloves at www.mapa-pro.com > SERVICE LIFE: Combination of material and thickness of gloves to give a service life from 1 to 3.

> 1 >> 2 >>> 3 3 GIVING THE MOST PROTECTION

A

for the job in hand, there is a Mapa glove

Mapa Professional Catalog - www.mapa-pro.com

33

Thermal Protection

TEMPERATURE

Critical Environments

ENVIRONMENT

GLOVE

TRIONIC

DESCRIPTION

SIZE

LENGTH

MATERIAL/INT. FINISH/ EXT. FINISH

STANDARDS

APPLICATIONS

E-194BPK A tripolymer exclusive that offers 100% comfort for optimal mechanical and chemical resistance

34

6 7 8 9 10 11

Electronics: - Photomask assembly, integrated circuit assembly, CD production, placement of thin layers - Manufacturing integrated circuits, manufacturing semi-conductors, handing of silicon wafers in acid baths

14 in (36 cm) / .020 in (20 mil) (0.50 mm)

35

Ensuring the protection of both operators and the products they handle, the Mapa AdvanTech range was designed to perfectly fulfil the requirements of high-tech production.

TRIONIC 514 PLUS

A tripolymer exclusive that offers 100% comfort for optimal mechanical and chemical resistance

Created with innovative, highly technical processes, and subject to inspection at every stage of their design and of packaging, each of these gloves satisfy all the quality criteria necessary for work in controlled environments.

• All manufacturing sites have ISO 9002 certification.

• The levels of glove cleanliness are tested periodically to ensure that the production quality of these gloves, intended for use in critical environments, complies with established specifications.

• Each chemical protection glove is tested using appropriate methods to detect any liquid-resistance defect, as well as inflation tested under inspection lamps so as to ensure user safety.

• The chemical resistance checks comply with ASTM standards and EN 374-3, providing the users with the information they need to choose suitable gloves for a given application.

CONTROLLED ENVIRONMENT (CLEAN ROOM)

• Mapa AdvanTech uses its own post-manufacturing cleaning process and clean rooms to maintain a level of product and packaging quality that meets requirements for cleanliness.

7 8 9 10

7 8 9 10 11

15 in (38 cm) / .020 in (20 mil) (0.50 mm)

Mixed formula (latex, neoprene and nitrile/ Chlorinated/ Embossed texture

521

522

Unique tri-polymer construction offers 100% comfort for optimal mechanical and chemical resistance

The chemical protection of nitrile combined with excellent mechanical resistance

21 in (46 cm) / .020 in (20 mil) 8 9 10 24 in (46 cm) / .020 in (20 mil)

6 7 8 9 10 11

13 in (33 cm) / .011 in (11 mil) (0.30 mm)

1110 Nitrile/chlorinated/ embossed texture CAT 3 ISO 5 (m 3.5) compatible

STANSOLV A-10CR ROLLPRUF

All applications requiring a reduced incidence of particles and extractables, combined with resistance to solvents, abrasion and puncture: - Silicon handling - Production of ultra-pure chemicals, solvent handling, and blending operations

0716 Triple polymer provides durability and strength with color band at rolled cuff edge to identify size.

7

7.5

8

8.5 9 12 in (30 cm) / .008 in (8 mil) (0.20 mm)

0726 6 The comfort and flexibility of latex for short-term operations

YOUR PRIORITIES ARE OUR PRIORITIES:

Reinforced mechanical resistance for short-term operations

Chlorinated/smooth with pebbled fingertips

TRILITES 984CP

CAT 3 ISO 4 (m 2.5) compatible Electronics: - Photomask assembly, integrated circuit assembly, CD production, placement of thin layers

6.5 7

8

CAT 3 ISO 5 (m 3.5) compatible

8.5 9

6 7 8 9 10

12 in (30 cm) / .004 in (4 mil) (10 mm)

Nitrile/Chlorinated/ Smooth with pebbled fingertips

NIPROTECT 529

A tripolymer exclusive that offers 100% comfort for optimal mechanical and chemical resistance

A

Electronics: - Manufacturing integrated circuits - Manufacturing semi-conductors - Handling of silicon wafers in acid baths Laboratories - Blending - Handling and transport of chemicals - Handling under fume hood

10

for the job in hand, there is a Mapa glove

CAT 3 ISO 4 (m 2.5) compatible

14 in (36 cm) / .020 in (20 mil) (0.50 mm)

SENSITRON 0760

• improving the effectiveness of the users, their productivity and their safety, by designing gloves that are ever-more effective and safe to use, • increasing production yields by reducing the amount of contaminants in products.

1110

TRIONIC O-240 TRIONIC

Quality guaranteed at every stage of production:

Unique tri-polymer construction offers 100% comfort for optimal mechanical and chemical resistance

11.5 in (36 cm) / 6 7 8 9

.006 in (6 mil) 0.50 mm

Mixed formula (latex, neoprene and nitrile/ Chlorinated/ Embossed texture

Health: - Pharmaceutical manufacturing, manufacturing of medical equipment Laboratory: - Research, analysis, manipulation of precision parts, optical processes

CAT 3 ISO 5 (m 3.5) compatible

Electronics: - Electronic component assembly (displays, LEDs, etc.)

CAT 3 PF-Clean Process

Laboratory: - Manufacturing of medicines, pharmaceutical preparation

Mapa Professional Catalog - www.mapa-pro.com

Critical Environments

E-194

MAPA PROFESSIONAL P.O. Box 156 1150 Taylor Lane, Cinnaminson, NJ 08077 Tel.: 800-537-2897 Fax: 800-537-3299

www.mapa-pro.com

For more information: www.mapa-pro.com > Selection guides for each segment to help you choose the right glove.

Also with a comprehensive, constantly updated database to protect you against chemical risks, > an advanced search engine to find a product based on your own criteria, > a product comparison tool, >a tool to help you locate your nearest Mapa Professional distributor, > and, of course, news, downloadable documents, a technical glossary, an FAQ section, etc.

If you have a Smartphone, scan this QR Code to visit the Mapa Professional download center.

There you will find documentation for all of our existing products, which you can read on your Smartphone or easily share with your contacts: Product brochures, data sheets, EC declarations of conformity, chemical resistance tables, thermal insulation curves, food safety test certificates and reports, etc.

A

for the job in hand, there is a Mapa glove