What is the Difference Between Dense Phase and Dilute Phase Pneumatic Conveying Systems?

What is the Difference Between Dilute Phase and Dense Phase Pneumatic Conveying Systems?

When it comes to bulk material handling and transfer, you can either chose a pneumatic conveyor or a mechanical conveyor. Here, pneumatic conveyors provide numerous benefits compared to mechanical systems such as simple routing, less maintenance, reduced exposure to hazardous materials etc. Also, pneumatic conveying systems are designed based on the type of the material being transferred, which brings us to the different transfer modes that are used - dense phase vs dilute phase. Thus, for this read, let’s check out the difference between Dilute Phase and Dense Phase pneumatic conveying systems, which will help you to pick the right system based on your requirement.

A] What is Dilute Phase Pneumatic Conveying Systems?

In the dilute phase pneumatic conveying, high velocity is used to keep the materials suspended in the air as it moves through the conveying pipe. This ensures that the material is conveyed continuously without getting accumulated at the bottom, and the velocity used in dilute phase range from 15 m/s to 40 m/s based on the material being conveyed.

Dilute (lean) phase pneumatic conveying systems are suitable for less abrasive materials, such as sawdust, coffee grounds, resins, pelletized products, and flour.

The two options available in dilute phase are pressure conveying and vacuum conveying. Also, dilute phase conveying supports flexible pipe routings, which makes it ideal for new and retrofit installations.

1. Dilute Phase Pressure Conveying

In this process, the positive displacement blower (exhauster) is placed at the beginning of the conveying line that helps move the material through the air, which is then released from a bin via a rotary airlock. One of the benefits of using a dilute phase pressure conveying system is that you can transfer the material being conveyed into different lines through diverter valves.

For example: If you want to move grains into different silos, you can use a multiple diverter valve to split the conveying line, which will allow you to distribute grains into as many silos as you need.

2. Dilute Phase Vacuum Conveying

In contrast, for dilute phase vacuum conveying, the positive displacement blower (exhauster) is placed at the end of the conveying line. Here, the blower draws the air from the beginning of the conveying line to create an airflow that moves the material through the conveying pipe into the receiver.

The primary benefit of vacuum conveying systems is that it helps you to pick up materials from multiple locations and collect (distribute) it to a single destination.

3. Pros of Dilute Phase Conveying Systems

 Dilute phase conveying systems are easy to clean and maintain.  It has a slightly lower capital cost compared to dense phase conveying systems.  They are compact, simplistic and any material can be conveyed in it through a pipeline, irrespective of its size and shape.  It is ideal for lower capacities, lower distances.

4. Cons of Dilute Phase Conveying Systems

 The high velocity that needs to be maintained in the dilute phase conveying systems results in high power consumption.  Use of abrasive products could result in wear and tear of the system component (conveying line and pipe elbows).  It leads to particle breakage and degradation of materials being conveyed.  It cannot handle higher capacities and longer distances.  Since dilute phase requires higher air volume, large filtration equipment is required.

B] What is Dense Phase Pneumatic Conveying Systems?

Dense phase pneumatic conveying is used to convey extremely abrasive, friable and/or heavy materials. Unlike dilute phase, the materials are not suspended in the air, rather in dense phase, a combination of low velocity and high pressure is used to move the material through the pipe, which then settles and accumulates at the bottom. The velocity used in the dense phase conveying is low and ranges typically around 2-7 m/s.

Dense phase pneumatic conveying systems are suitable for plastics, chemicals, metals and minerals, cement, limestone etc. In dense phase too, two options are available - pressure conveying and vacuum conveying.

1. Dense Phase Pressure Conveying Systems

In this process, compressed air above 1 Barg is used to push materials from a pressure vessel through a pipeline to the destination, wherein the air and product are separated. Low velocity is used initially to move the product through the pipeline, which then gradually accelerates towards the destination. Dense phase pressure conveying is well-suited for conveying high-capacity materials over a long distance to multiple destinations and is ideal for solids that are fluidizable.

2. Dense Vacuum Conveying Systems

In this process, high capacity vacuum pumps are used to convey materials from a feed hopper to a receiving vessel (vacuum hopper). Upon reaching the destination, the air and product are separated by a filter, with the conveyed product being discharged into the destination silo. Dense vacuum conveying is well-suited only for low distances and low capacity systems.

Further reading: Vacuum Dense Phase Pneumatic Conveying 3. Pros of Dense Phase Conveying Systems

 Since dense phase conveying is operated at a low velocity, it uses less power.  There is minimal wear and tear of the system component.  There is also minimal degradation and particle breakage of materials being conveyed.  Also, since dense phase systems operate at low air volume, it requires compact filtration equipment compared to dilute phase.

4. Cons of Dense Phase Conveying Systems

 Dense phase conveying systems have a slightly higher capital cost compared to dilute phase system.  It is bulkier than dilute phase systems.

#Dense Phase vs Dilute Phase Systems - A Quick Overview

Sr.

Dense Phase System

Dilute (Lean) Phase System

No Power Consumption 1

High-power efficient (usually

Low power consumption (usually consumes 2 to

consumes 40% to 50% of the power used 2.5 times the power used by Dense Phase

by Lean/Dilute Phase Conveying

Conveying Systems)

Systems) Air Usage 2

Uses a lesser quantity of Air.

3

Powered by Screw Compressors since Powered by Roots Blowers with high volumes

Uses a large quantity of Air.

operating pressures are higher.

since operating pressures are lower.

Velocity of Conveying

4

Runs at a very low velocity of conveying

Runs at a very high & dynamic velocity of

(usually 2 to 4 m/sec.)

conveying (usually 28 to 40 m/sec.)

Wear & Tear

5

Less wear and tear on pipeline and system

components

due

to

Excessively high wear and tear on pipeline and low systems due to high velocities.

velocities.

Segregation & Degradation of Material 6

Does not cause segregation of material Causes segregation of material because of very because of very low velocity.

7

high velocity of conveying.

Degradation of material particles is bare Causes a lot of degradation of material particles. minimal.

Sand is highly-abrasive material which knocks off piping wall thickness due to high velocity conveying rate.

Receiving end Headroom Requirement-Bag filter Size & Height 8

Needs a very small-sized Bag Filter due

Needs a very large-sized Bag Filter due to

to lower air volumes hence low filtration large air volumes hence very high filtration area. areas.

9

Height of bag filter will be very less in Due to a larger filtration area, bag filter’s height comparison.

and diameter will be much larger than that of the dense phase system.

10

A Rotary Valve is not required to be A Rotary Valve is required to be placed below placed below the bag filter.

11

the bag filter to hold vacuum.

Just a terminating box/bend going into An involute cyclonic separator cum receiver the silo hence no space issues.

required to capture the material coming in at high velocity.

Air Volume & Pipe Size

12

Air volume for dense phase system will Air volume for lean/dilute phase system will be be very less.

13

very high.

Pipe size for dense phase system will be Pipe size for lean/dilute phase system will be relatively smaller.

much larger.

Health & Safety

14

Dense phase systems use gentle velocity, Lean/dilute phase systems use high velocity to which does not cause a lot of frictional convey, which leads to a lot of frictional charge charge & spark generation hence is safe.

& spark generation and is a potential hazard for fire, blast etc.

Cost - Capital Vs Running 15

The capital cost of a dense phase system The capital cost of a dilute (lean) phase system (complete project as a cost to company) (complete project as a cost to company) shall be shall be slightly higher than that of a slightly lower than that of a dense phase lean/dilute phase system.

16

Running

costs

due

to

system. the

power Running costs due to the power consumed will

consumed will be minimal for a dense be drastically higher for a dilute/lean phase phase system.

17

system for sand.

Maintenance costs shall be relatively Maintenance costs will be very high for sand

less.

vacuum suction.

#Dense Phase vs Dilute Phase Pneumatic Conveying - Which to Choose?

When it comes to picking the right pneumatic conveying system, the choice is primarily governed by two things; the material properties and the capacity & distance of conveying.

For example, dense phase conveying is optimal for powders, pellets & granules.

Whereas, flakes are generally conveyed in the dilute phase due to their particle size & shape.

Likewise, for low capacity and short distance conveying dilute phase systems are ideal, while high capacity and long-distance conveying are catered by dense phase systems.

Hope this guide helps you make the right choice and for more information or a query, get in touch with us!