Latest Lifting Africa Jan-Feb 2021

Page 21

First, the crane was assembled in its SFSL fixed jib configuration and subjected to 125% of its maximum recommended load. Next, the crane was re-assembled, this time to its SSL configuration, with 90m boom but no jib, and again loaded with 1,250 tons. Testing of the crane in its SFSL configuration lasted for approximately one week, while testing in its SSL configuration lasted for three days in total.

FOCUS30 crane completes a testing phase Mammoet’s crane for confined spaces, the FOCUS30, have completed all required testing and is now being disassembled, ready for mobilization to its first project. Over the last few weeks, the crane undertook a series of controlled tests to certify its strength and safety. The FOCUS30 will enhance construction projects in oil refineries and cities; where stronger regulation and a growing population means lifts are surrounded by live plant, buildings and people. Its low ground bearing pressure helps to protect underfoot infrastructures such as tunnels and

cabling and reduce disturbing the land before lifts. The crane will also allow project schedules to be enhanced, for example by allowing more cabling and pipework to be installed while lifting is completed. Testing of the FOCUS30 took place in two phases, under the watchful eye of Lloyd's Register, an independent 3rd party surveyor

Sideload, swing load and maximum radius testing were performed during both phases, while the crane's international crew looked on. Repositioning of its superlift between tests took just two hours each time, rather than one to two days – a feature that will reduce plant downtime when the crane starts project work. Following completion on both phases, the crane is now fully compliant with the EN 13000 standard for mobile cranes, and with F.E.M. 5.004, which governs the design of steel structures of general use. The crane will now be disassembled, ready for mobilization to its first active project, taking place in the UK. Mammoet has produced a 360-degree virtual tour of the crane.

Mammoet, +27 (0) 11 882 4499, sales@southernafrica@mammoet. com, www.mammoet.com

ST Crane Hire specialises in: • Mobile Crane Hire • Crawler Crane Hire • Abnormal transport • Rigging JHB 082 292 1148 Witbank 082 292 1147

Port Elizabeth 071 883 7921 www.stcranehire.co.za Lifting Africa - Jan/Feb 2021

21

PRODUCTS & SERVICES

who worked alongside Mammoet during the design of the FOCUS30.


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.
Latest Lifting Africa Jan-Feb 2021 by Lifting Africa - Issuu