Lezzer Lumber Millwork Book

MOULDING & MILLWORK PROFILE GUIDE

LEZZERLUMBER.COM

www.lezzerlumber.com

Curwensville Division Robin Gray (814) 236-0221 x261 Fax: (814) 236-1277 Email: robingray@lezzer.com Lancaster Division Donna Schera (717) 393-3605 Fax: (717) 393-1349 Email: donnaschera@lezzer.com

Lezzer Lumber will create your moulding on our state of the art computerized moulder quickly and precisely with unparalleled quality and versatility. We can create custom shapes as well. If you don’t see the shape you need, just ask us. All mouldings and trim pieces are available in the full range of hardwoods and softwoods we carry. Whether you need as little as a few feet or thousands of feet we can do it all. Specified lengths are possible depending on our inventory or availability of material; a surcharge may be added for these lengths. Profiles in this catalog may be slightly out of proportion due to reproducing this catalog.

Oak and Poplar are available on stock. Other woods are available. Most stock items are available in random lengths only.

Terms of Sale • Approvimately 15% extra for specified lengths. (When Available) Lengths over 12 feet may be higher.

• We reserve the right to a 10% overrun on all special orders.

• Custom knife and set up is available upon request. Please call for prices.

• $50 Setup Charge for all orders under 200 Lineal Feet. (Note: Multiple profiles may total 200 LF) Delivery Delivery charges may apply to certain areas.

When any moulding is delivered on a Lezzer transport truck please report any errors, damage or shortage on the driver’s receipt at time of delivery. All claims must be reported to Lezzer within five working days.

When delivered by any other source all claims are the responsibility of the consignee and should be reported to the freight carrier immediately.

Cancellation Policy

Products may not be returned without prior authorization Once production has been scheduled non-stock and special orders cannot be cancelled or returned.

There will be no returns on materials after 30 days from invoice date.

Stock items that are less than 30 days old and in salable condition will be inspected and restocked for a 20% handling charge.

Care should be taken to avoid storing in damp or excessively dry areas –Lezzer will not be held responsible for moisture content or related problems of cabinets or millwork after leaving our shop and before finishing.

Lezzer Lumber looks forward to being your source for all your moldings and trim pieces.

Thank you.

Curwensville Division Robin Gray (814) 236-0221 x261 Fax: (814) 236-1277 Email: robingray@lezzer.com Lancaster Division Donna Schera (717) 393-3605 Fax: (717) 393-1349 Email: donnaschera@lezzer.com

www.lezzerlumber.com

Mouldings Storage and Job Conditions To protect your moulding store it in a dry, ventilated space that is protected from weather, dirt and damage. If you will be storing moulding for an extended period of time or in areas of higher than recommended humidity, seal the end of all pieces as soon as possible.

Mouldings should be at optimum moisture content at the time of installation. Maintain installation areas in the relative humidity range required for the Optimum Moisture Content-midway between the extreme values that the wood is likely to reach. of wood. Allow material to acclimate to installation area conditions prior to installation.

The Language of Wood These are terms commonly used to describe characteristics you will find in different wood types • Hardwood - Wood cut from broad-leaved mostly deciduous trees.

• Grain - Wood’s unique pattern caused by the general direction of the fibers • End Grain - The surface of wood exposed after cutting across the fibers.

• Sapwood - The new wood growth that helps carry sap and stores food for tree growth.

• Heartwood - The mature wood that creates the spine of the tree; usually harder than sapwood.

• Mineral Streak - Minerals that have been absorbed into the tree causing a dark brown to black area.

• Birdpeck - Minute, pitted areas in wood.

• Pitchpocket - An opening in the wood fiber that has held the resinous material “pitch” • Burl - A knot in wood that gives the wood fibers a beautiful peacock-tail pattern.

• Medullary Ray - A pattern of light that runs across the grain, causing “ray fleck” or “splash figures”.

• Movement - The shrinkage and expansion of wood as it gives off and absorbs moisture.

www.lezzerlumber.com

Curwensville Division Robin Gray (814) 236-0221 x261 Fax: (814) 236-1277 Email: robingray@lezzer.com Lancaster Division Donna Schera (717) 393-3605 Fax: (717) 393-1349 Email: donnaschera@lezzer.com

Characteristics of Natural Wood Wood is a product of nature and its natural imperfections are part of its appeal and character; every piece of wood- even within the same tree- is slightly different in color, texture and grain from every other piece. The look and feel of wood is dictated by a number of factors, including climate, soil nutrients, growing season, season of harvest and age at harvest. These are some natural characteristics of hardwoods that can affect its appearance and ultimately the look of your moulding.

• Grain The originality of wood depends largely on how it grows. Wood may have straight grain, cross grain, spiral grain, interlocking grain or even wavy or curly grain. The term Grain also describes how the wood is cut or worked. The appearance of wood will also vary depending on how it was cut and planned Sawing and planning can be done “against the grain” , “with the grain”, or “across the grain” - with each method having a different effect on how the wood accepts stain.

• Natural Color The natural color of wood varies from shades of white, green, red and black.

This natural color helps to determine the appearance of the wood after a stain has been applied.

Light stains allow more of the grain to show through and darker stains less grain. Natural color, grain and texture may cause slight variations in the wood from one area to another. Wood may darken as it ages according to the species, cut and type of finish. Conditions in the home or office environment such as ultraviolet light, cleaning chemicals, smoke, etc… can also affect color.

• Mineral Streaks Any dark brown or black areas in the wood are where the tree absorbed nutrients. Since the number of mineral streaks varies from board to board, you may notice differences in many pieces of your mouldings. These streaks are especially evident in light wood such as maple and in light stains or natural finishes when no stain is applied.

• Movement Wood expands and contracts as it absorbs and gives off moisture. Some hardwoods, such as cherry and maple, are more sensitive to changes in temperature.

MOULDING AND MILLWORK DIVISION

www.lezzerlumber.com

Curwensville Division Robin Gray (814) 236-0221 x261 Fax: (814) 236-1277 Email: robingray@lezzer.com Lancaster Division Donna Schera (717) 393-3605 Fax: (717) 393-1349 Email: donnaschera@lezzer.com

Index:

Casing Description

11/16” x 2-1/2” -361 Colonial 11/16” x 2-1/2” - 361W Colonial 11/16” x 2-1/4” - 376 Colonial 11/16” x 2-1/4” - 356 Colonial 11/16” x 2-1/4” - 327 Ranch 11/16” x 3-1/4” - 37 Fluted or Reeded 11/16” x 2-1/4” 2 1/4” - 444 Colonial C l i l 1-1/16” x 3-1/2” - 97 Adams 1-1/16” x 3-9/16” - HH217 Casing 3/4” x 3-15/16” 1-1/32” x 3-1/2” 3/4” x 3-1/4” 25/32” x 3-1/2” 25/32 3-1/2 27/32” x 3-1/2” 21/32” x 2-1/2” 3/4” x 2-1/2” 7/8” x 4-1/2” 7/8” x 3-1/8” 3/4” x 3 3/4 3-1/2” 1/2 7/8” x 3-1/2” 13/16” x 3-5/8” Reeded 13/16” x 5-1/2” Reeded 7/8” x 4-3/4” 3/4” x 6” V-Groove 11/16” x 3-1/4” WM445 Specify thickness and width R2E 9/16” x 2-1/2” 11/16” x 2-1/4” 1” x 4-13/16” 3/4” x 2-1/2” 11/16” x 4-3/4” 1 1/16” x 3-1/2”3 1/2” 9043M 1-1/16”

Knife Number WM361-L WM361W-L WM376-L WM366-L WM327-L WM376-L WM376 L WM376-L WM97-L HH217-L LM-00002 LM-00005 LM-00009 LM-00011 LM-00016 LM-00018 LM-00028 LM-00031 LM-00032 LM-00039 LM 00039 LM-00042 LM-00059 LM-00060 LM-00064 LM-00066 LM-00069 LEZ010 LEZ016 LEZ019 LEZ024 LEZ035 LEZ039 LEZ045

Page C1 C2 C3 C4 C5 C6 C7 C8 C9 C 10 C 11 C 12 C 13 C 14 C 15 C 16 C 17 C 18 C 19 C 20 C 21 C 22 C 23 C 24 C 25 C 26 C 27 C 28 C 29 C 30 C 31 C32

Index 1

Index:

Base & Base Cap Description

Knife Number

9/16” x 3-1/4” - 623 Colonial 9/16” x 5-1/4 or7-1/4”” – 163E 9/16” x 3-1/4” – 713 Ranch 11/16” x 5-1/4” or 7-1/4” 5/8” x 5-3/16” 3/4” x 6” - Beaded 3/4” x 4 4-1/2” 1/2” 3/4” x 4-15/16” 1-1/8” x 5-1/2” 11/16” x specify height 23/32” x 5-1/4” 13/16” x 3-33/64” 3/4” x 5-1/2” 3/4 5-1/2 9/16” x 7” 9/16” x 4-1/2” 5/8” x 5-1/4” 3/4” x 7-1/4” 1-1/8” x 4-3/8” Furniture base 3/4” x 6 3/4 6” V-Groove V Groove 5/8” x specify height 1” x 5-1/4” 3/4” x specify height 9/16” x 4-1/4” Bevel edge 13/16” x Specify (use with LEZ034 base cap) 13/16” x 2-1/2” Base cap 5/8” x 1” Base cap 37/64” x 1-1/2” Base cap 11/16” x 1-1/2” Base cap 41/64” x 1-7/64” Base cap 27/32” x 1-5/8” Base cap 27/32” x 1-31/32” Base cap 1/2” x 7/8” B Base cap 9/16” x 29/32”

Index 2

WM623-L WM163E-L WM713-L 9253M-L LM-00003 LM-00010 LM 00012 LM-00012 LM-00013 LM-00019 LM-00020 LM-00023 LM-00024 LM-00030 LM-00034 LM-00035 LM-00038 LM-00050 LM-00052 LM-00066 LM 00066 LM-00070 LM-00080 LEZ011 LEZ018 LEZ033 LEZ034 LM-00015 LM-00017 LM-00046 LM-00051 LM-00068 LEZ003 LEZ036 LEZ037

Page B1 B2 B3 B4 B5 B6 B7 B8 B9 B 10 B 11 B 12 B 13 B 14 B 15 B 16 B 17 B 18 B 19 B 20 B 21 B 22 B 23 B 24 B 25 B 26 B 27 B 28 B 29 B 30 B 31 B 32 B 33

Index:

Cove & Crown Description

11/16” x 11/16” -100 Cove 1-1/4” x 1-1/4” – Beaded cove 9/16” x 3-5/8” – 49 Crown 9/16” x 4-5/8” – 47Crown 9/16” x 5-1/4” – 45 Crown 1” x 6-61/64” – 43 Crown 9/16” x 6-27/32” 6 27/32” – 860 Crown C 1-1/4” x 3-3/8” – Box cove 1-1/16” x 4-1/8” - Crown 1-1/16” x 6-1/2” - Crown 11/16” x 4-1/4” – WM48 Crown 11/16” x 2-23/32” – Bed mold 3/4” x 2-7/8” 3/4 2-7/8 – Cove 11/16” x 2-23/32” – Cove/Crown

Knife Number WM100-L LM-00048 WM49-L WM47-L WM45-L WM43-L CR860 L CR860-L LM-00001 LM-00026 LM-00033 LM-00040 LM-00047 LM-00047 LEZ015

Page

C/C 1 C/C 2 C/C 3 C/C 4 C/C 5 C/C 6 C/C 7 C/C 8 C/C 9 C/C 10 C/C 11 C/C 12 C/C 13 C/C 14

Index 3

Index:

Chair Rail Description

11/16” x 3” – 297 Chair rail 5/8” x 2-1/4” – 224Chair rail 1-1/16” x 3-3/8” – 301 Chair rail 1-1/16” x 3” – 300 Chair rail 1-1/32” x 2-19/32” – Chair rail 1” x 3-5/8” – 390 Chair rail 7/8” x 3 3-5/32” 5/32” – Chair Ch i rail il 1-19/64” x 4” – Chair rail 3/4” x 3-1/2” – Chair rail 5/8” x 2” Chair rail 1/2” x 3” Chair rail 1-7/8” x 4-1/4” Chair rail 3/4” x 4-3/4” 3/4 4-3/4 – Chair rail

Index 4

Knife Number WM297-L WM224-L WM301-L WM300-L LM-00006 LM-00013 LM 00022 LM-00022 LM-00037 LM-00041 LM-00073 LM-00078 LEZ020 LEZ021

Page

CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8 CH 9 CH 10 CH 11 CH 12 CH 13

Index:

Stop, p, Shoe & ¼ Round Description

7/16” x 1-3/8” - 936 Colonial stop 3/16” x 1-3/8” – 886 R1E stop 1/2” x 3/4” – 126 Base shoe 1/2” x 5/8” – Glass bead 7/8” x 7/8” – Quarter round 1-1/4” x 1-1/4” – Beaded quarter round 1/4” x 1/4” – Quarter Q t round d 1/4” x 1/2” – Halfround 1/2” x 3/4” – Base shoe 13/16” x specify depth – Door bead Specify thickness & width – R1E stop 11/16” x 1” - Shingle mold 1/2” x 3/4” 1/2 3/4 – Scotia stop 1/2” x 7/8” – Base shoe 1” x 1” – Chamfer strip

Knife Number WM936-L WM886-L WM126-L LM-00007 LM-00078 LM-00048 LM 00061 LM-00061 LM-00062 LM-00071 LEZ012 LEZ014 LEZ028 LEZ029 LEZ036 LEZ040

Page

SSQ 1 SSQ 2 SSQ 3 SSQ 4 SSQ 5 SSQ 6 SSQ 7 SSQ 8 SSQ 9 SSQ 10 SSQ 11 SSQ 12 SSQ 13 SSQ 14 SSQ 15

Index 5

Index:

Outside Corners Description

Knife Number

3/4” x 3/4” Outside corner 1-3/4” x 1-3/4” Outside corner 9/16” x specify width” – 2 PC Outside corner

Index 6

WM206-L LM-00056 LM-00063

Page

OSC 1 OSC 2 OSC 3

Index:

Tread & Landing g Tread Description

1” x specify depth –Landing tread 1-1/16” x specify depth - Stair tread 2-1/2” x specify depth – Stair tread

Knife Number 35-L, 55L TREAD-L LEZ032

Page SLT 1 SLT 2 SLT 3

Index 7

Index:

Wainscot and T & G Description

Knife Number

23/32” x specify width - Edge & Center Bead 23/32” x specify width - Edge & Center V Specify thickness & width – V-Edge T&G 47/64” x 3” – Beaded T&G 11/16” x Specify width – Beaded T&G 11/16” x Specify width – T&G 23/32” x specify if width idth - Edge Ed &C Center t V Specify thickness & width – V-Edge T&G 2-1/2” x specify width – V-Edge T&G Azek T&G decking profile (matches porch) 3/8” x 4-1/8” - Wainscot 3/4” x specify width – T&G flooring

Index 8

BEAD-L V-PANEL-L DECKING-L LM-00025 LM-00049 LM-00053 LM 00054 LM-00054 LEZ030 LEZ038 LEZ041 WAINSCOT4-L FLOORING-L

Page

T&G 1 T&G 2 T&G 3 T&G 4 T&G 5 T&G 6 T&G 7 T&G 8 T&G 9 T&G 10 T&G 11 T&G 12

Index: Door and Extension Jambs

Description

21/32” x specify depth – 1196T Ext jamb 11/16” x specify depth – 1196W Ext jamb 21/32” x specify depth – 200 Ext jamb 3/4” x specify width – Door jamb 1” x specify width – Door jamb

Knife Number 1196T-L 1196W-L 200-L JAMB-L LEZ013

Page

JEJ 1 JEJ 2 JEJ 3 JEJ 4 JEJ 5

Index 9

Index:

Window Stool Description

1” x specify depth – Window stool 3/4” x specify depth – Window stool 1-1/16” x specify depth – Window stool 1-1/16” x specify depth – Window stool

Index 10

Knife Number STOOL-L LM-00072 LM-00079 TREAD-L

Page ST 1 ST 2 ST 3 ST 4

Index:

Handrail Description

2-1/4” x 2-3/8” – Specify plowed or solid 3/4” x 2-1/4” – Plowed shoe rail 1-1/2” x 1-11/16” – Round/flat bottom 1-1/4” x 2-1/4” – Oblong/flat bottom 1-1/2” x 5-1/2” – Recessed grip 1-5/16” x 2” – Detailed oblong 1 1/2” x 5 1-1/2” 5-1/2” 1/2” – Recessed R d grip i 1-3/8” x 1-1/2” – Round plowed

Knife Number 6010-L 6045-L WM231-L WM240-L LM-00021 LM-00042 LM 00058 LM-00058 LM-00067

Page HR 1 HR 2 HR 3 HR 4 HR 5 HR 6 HR 7 HR 8

Index 11

Index:

Log Siding & Siding Description

1-3/8” x 7-1/8” – T&G Log siding (2 x 8) 1-3/8” x 7-1/8” – Shiplap Log siding (2 x 8) 1-3/8” x 5-3/8” – T&G Log siding (2 x 6) 3/4” x 5-3/8” – Shiplap Log siding (1x 6) 1-1/4” x 6-3/4 – Shiplap Log siding 1-3/8” x 5-1/8” – Shiplap Log siding (2 x 6) 1 3/8” x 3 1-3/8” 3-3/8” 3/8” – Shiplap Shi l L Log siding idi (2 x 4) 1-1/2” x 7-5/8” – Shiplap siding 11/16” x 5-7/16” – Shiplap siding 1-1/2” x 11-1/8” - T&G Log siding (2 x 12)

Index 12

Knife Number LOGSIDINGTG-L LOGSIDINGSL-L 2X6LOGTG-L LM-00027 LM-00028B LM-00036 LM 00055 LM-00055 LM-00065 LEZ018 LEZ031

Page

SD 1 SD 2 SD 3 SD 4 SD 5 SD 6 SD 7 SD 8 SD 9 SD 10

Index:

Misc. Mouldings Description

11/16” x 2-1/4” – WM77 Panel cap 11/16” x 1-5/8” – Panel cap (mirror mold) 1-1/2” x Specify width (2x) 1” x 1-7/8” - Backband 2-1/8” x 3-15/16” – Porch top rail 3/4” x 4” – Porch bottom rail 2 7/8” x 4 2-7/8” 4-7/16” 7/16” – Porch P h ttop rail il 1-1/16” x 1-3/4” – Rail pickets 1-1/16” x 2-15/64” – Rail pickets 2-13/16” x 3-5/8” – Porch bottom rail 11/16” x 1” – Shingle mold 1/2” x 3/4” – Scotia stop 1” x 1” 1 1 – Chamfer strip Azek T&G Decking (matches Azek porch) Fascia with rabbet & dado Fascia with rabbet Soffit with rabbet & dado

Knife Number LM-00029 LM-00045 LM-00057 LM-00074 LM-00076 LM-00077 LEZ025 LEZ026A LEZ026B LEZ027 LEZ028 LEZ029 LEZ040 LEZ041 LEZ042 LEZ043 LEZ044

Page

MISC 1 MISC 2 MISC 3 MISC 4 MISC 5 MISC6 MISC 7 MISC 8 MISC 9 MISC 10 MISC 11 MISC 12 MISC 13 MISC 14 MISC 15 MISC 16 MISC 17

Index 13

KNIFE NUMBER

WM361-L Casing

Curwensville Moulding and Millwork

Stocked at most Lezzer locations in oak – OAK361, 7OAK361

11/16” x 2-1/2”

C1

KNIFE NUMBER

WM361W-L Casing

Curwensville Moulding and Millwork

C2

11/16” x 3-1/2”

KNIFE NUMBER

WM376-L Casing

Curwensville Moulding and Millwork

11/16” x 2-1/4”

C3

KNIFE NUMBER

WM356-L Casing

Curwensville Moulding and Millwork

C4

11/16” x 2-1/4”

KNIFE NUMBER

WM327-L Casing

Curwensville Moulding and Millwork

11/16” x 2-1/4”

C5

KNIFE NUMBER

WM37-L Casing

Curwensville Moulding and Millwork

C6

11/16” x 3-1/4”

KNIFE NUMBER

WM444-L Casing

Curwensville Moulding and Millwork

11/16” x 3-1/2”

C7

KNIFE NUMBER

WM97-L Casing

Curwensville Moulding and Millwork

C8

1-1/16” x 3-1/2”

KNIFE NUMBER

HH217-L Casing

Curwensville Moulding and Millwork

1-1/16” x 3-9/16”

C9

KNIFE NUMBER

LM-00002 Casing

Curwensville Moulding and Millwork

C 10

3/4” x 3-15/64”

KNIFE NUMBER

LM-00005 Casing

Curwensville Moulding and Millwork

1-1/32” x 3-1/2”

C 11

KNIFE NUMBER

LM-00009/10 Casing/Base

Curwensville Moulding and Millwork

C 12

¾” x specify height”

KNIFE NUMBER

LM-00011 Casing

Curwensville Moulding and Millwork

25/32” x 3-1/2”

C 13

KNIFE NUMBER

LM-00016 Casing

Curwensville Moulding and Millwork

C 14

27/32” x 3-1/2”

KNIFE NUMBER

LM-00018 Casing

Curwensville Moulding and Millwork

21/32” x 2-1/2”

C 15

KNIFE NUMBER

LM-00028 Casing

Curwensville Moulding and Millwork

C 16

3/4” x 2-1/2”

KNIFE NUMBER

LM-00031 Casing

Curwensville Moulding and Millwork

7/8” x 4-1/2”

C 17

KNIFE NUMBER

LM-00032 Casing

Curwensville Moulding and Millwork

C 18

7/8” x 3-1/8”

KNIFE NUMBER

LM-00039 Casing

Curwensville Moulding and Millwork

3/4” x 3-1/2”

C 19

KNIFE NUMBER

LM-00042 Casing

Curwensville Moulding and Millwork

C 20

7/8” x 3-1/2”

KNIFE NUMBER

LM-00059 Casing

Curwensville Moulding and Millwork

13/16” x 3-5/8”

C 21

KNIFE NUMBER

LM-00060 Casing

Curwensville Moulding and Millwork

C 22

13/16” x 5-1/2”

KNIFE NUMBER

LM-00064 Casing

Curwensville Moulding and Millwork

7/8” x 4-3/4”

C 23

KNIFE NUMBER

LM-00066 V-Groove Casing/Base

Curwensville Moulding and Millwork

C 24

3/4” x 6”

KNIFE NUMBER

LM-00069 WM 445 Casing

Curwensville Moulding and Millwork

11/16” x 3-1/4”

C 25

KNIFE NUMBER

LEZ010 Heavy Eased Casing

Curwensville Moulding and Millwork

Specify p y thickness x specify p y width C 26

KNIFE NUMBER

LEZ016 Casing

Curwensville Moulding and Millwork

9/16” x 2-1/2”

C 27

KNIFE NUMBER

LEZ019 Casing

Curwensville Moulding and Millwork

C 28

11/16” x 2-1/4”

KNIFE NUMBER

LEZ024 Casing

Curwensville Moulding and Millwork

1” x 4-13/16”

C 29

KNIFE NUMBER

LEZ035 Casing

Curwensville Moulding and Millwork

C 30

3/4” x 2-1/2”

KNIFE NUMBER

LEZ039 Casing

Curwensville Moulding and Millwork

11/16” x 4-3/4”

C 31

KNIFE NUMBER

LEZ045 9043M Casing

Curwensville Moulding and Millwork

C 32

1-1/16” x 3-1/2”

KNIFE NUMBER

WM163E-L Base

Curwensville Moulding and Millwork

Stocked at most Lezzer locations in 3-1/4” oak – OAK623

9/16” x 3-1/4” or specify height

B1

KNIFE NUMBER

WM163E-L Base

Curwensville Moulding and Millwork

B2

9/16� x specify height

KNIFE NUMBER

WM713-L Base

Curwensville Moulding and Millwork

9/16” x 3-1/4”

B3

KNIFE NUMBER

9253M-L Base

Curwensville Moulding and Millwork

B4

9/16” x 5-1/4” or 7-1/4”

KNIFE NUMBER

LM-00003 Base

Curwensville Moulding and Millwork

5/8” x 5-3/16”

B5

KNIFE NUMBER

LM-00009/10 Casing/Base

Curwensville Moulding and Millwork

B6

¾” x specify height”

KNIFE NUMBER

LM-00012 Base

Curwensville Moulding and Millwork

3/4” x 4-1/2”

B7

KNIFE NUMBER

LM-00013 Base

Curwensville Moulding and Millwork

B8

3/4” x 4-15/16”

KNIFE NUMBER

LM-00019 Base

Curwensville Moulding and Millwork

1-1/8” x 5-1/2”

B9

KNIFE NUMBER

LM-00020 Azek Base or Cap

Curwensville Moulding and Millwork

B 10

11/16� x specify height

KNIFE NUMBER

LM-00023 Base

Curwensville Moulding and Millwork

23/32 “ x 5-1/4”

B 11

KNIFE NUMBER

LM-00024 Base

Curwensville Moulding and Millwork

B 12

13/16” x 3-33/64”

KNIFE NUMBER

LM-00030 Base

Curwensville Moulding and Millwork

3/4” x 5-1/2”

B 13

KNIFE NUMBER

LM-00034 Base

Curwensville Moulding and Millwork

B 14

9/16” x 7”

KNIFE NUMBER

LM-00035 Base

Curwensville Moulding and Millwork

9/16” x 4-1/2”

B 15

KNIFE NUMBER

LM-00038 Base

Curwensville Moulding and Millwork

B 16

5/8” x 5-1/4”

KNIFE NUMBER

LM-00050 Beaded Base

Curwensville Moulding and Millwork

3/4” x 7-1/4”

B 17

KNIFE NUMBER

LM-00052 Furniture Base

Curwensville Moulding and Millwork

B 18

1-1/8” x 4-3/8”

KNIFE NUMBER

LM-00066 V-Groove Casing/Base

Curwensville Moulding and Millwork

3/4” x 6”

B 19

KNIFE NUMBER

LM-00070 WM750 Series Base

Curwensville Moulding and Millwork

B 20

5/8� x specify height

KNIFE NUMBER

LM-00080 Base

Curwensville Moulding and Millwork

1” x 5-1/4”

B 21

KNIFE NUMBER

LEZ011 Base

Curwensville Moulding and Millwork

B 22

3/4” x specify width”

KNIFE NUMBER

LEZ018 Base

Curwensville Moulding and Millwork

9/16” x 4-1/4”

B 23

KNIFE NUMBER

LEZ033 Base (use with LEZ034)

Curwensville Moulding and Millwork

B 24

13/16 x specify height

KNIFE NUMBER

LEZ034 Base Cap (use with LEZ033)

Curwensville Moulding and Millwork

13/16” x 2-1/2”

B 25

KNIFE NUMBER

LM-00015 Base Cap

Curwensville Moulding and Millwork

B 26

5/8” x 1”

KNIFE NUMBER

LM-00017 Base Cap

Curwensville Moulding and Millwork

37/64” x 1-1/2”

B 27

KNIFE NUMBER

LM-00046 Base Cap

Curwensville Moulding and Millwork

B 28

11/16” x 1-1/2”

KNIFE NUMBER

LM-00051 Base Cap

Curwensville Moulding and Millwork

41/64” x 1-7/64”

B 29

KNIFE NUMBER

LM-00068 Base Cap

Curwensville Moulding and Millwork

B 30

27/32” x 1-5/8”

KNIFE NUMBER

LEZ003 Base Cap

Curwensville Moulding and Millwork

27/32” x 1-31/32”

B 31

KNIFE NUMBER

LEZ036 Base shoe

Curwensville Moulding and Millwork

B 32

1/2” x 7/8”

KNIFE NUMBER

LEZ037 Base Cap

Curwensville Moulding and Millwork

9/16” x 29/32”

B 33

KNIFE NUMBER

WM100-L Cove

Curwensville Moulding and Millwork

Stocked at most Lezzer locations in oak – OAK100, 8OAK100

11/16” x 11/16”

C/C C/C11

KNIFE NUMBER

LM-00048 Beaded Cove

Curwensville Moulding and Millwork

C/C 2

1-1/4” x 1-1/4”

KNIFE NUMBER

WM49-L Crown

Curwensville Moulding and Millwork

Stocked at most Lezzer locations in oak – OAK49

9/16” x 3-5/8”

C/C 3

KNIFE NUMBER

WM47-L Crown

Curwensville Moulding and Millwork

C/C 4

9/16” x 4-5/8”

KNIFE NUMBER

WM45-L Crown

Curwensville Moulding and Millwork

9/16” x 5-1/4”

C/C 5

KNIFE NUMBER

WM43-L Crown

Curwensville Moulding and Millwork

C/C 6

1” x 6-61/64”

KNIFE NUMBER

WM47-L Crown

Curwensville Moulding and Millwork

9/16” x 6-27/32”

C/C 7

KNIFE NUMBER

LM-00001 Box Cove

Curwensville Moulding and Millwork

C/C 8

1-3/4” x 3-3/8”

KNIFE NUMBER

LM-00026 Crown

Curwensville Moulding and Millwork

1-1/16” x 4-1/8”

C/C 9

KNIFE NUMBER

LM-00033 Crown

Curwensville Moulding and Millwork

C/C 10

1-1/16” x 6-1/2”

KNIFE NUMBER

LM-00040 WM48 Crown

Curwensville Moulding and Millwork

11/16” x 4-1/4”

C/C 11

KNIFE NUMBER

LM-00047 Bed Mold

Curwensville Moulding and Millwork

C/C 12

11/16” x 2-23/32”

KNIFE NUMBER

LM-00075 Cove/Crown

Curwensville Moulding and Millwork

3/4” x 2-7/8”

C/C 13

KNIFE NUMBER

LEZ015 Cove/Crown

Curwensville Moulding and Millwork

C/C 14

11-16” x 4-1/2”

KNIFE NUMBER

WM297-L Chair Rail

Curwensville Moulding and Millwork

Stocked at most Lezzer locations in oak – OAK297

11/16” x 3”

CH 1

KNIFE NUMBER

WM224-L Chair Rail

Curwensville Moulding and Millwork

CH 2

5/8” x 2-1/4”

KNIFE NUMBER

WM301-L Chair Rail

Curwensville Moulding and Millwork

1-1/16” x 3-3/8”

CH 3

KNIFE NUMBER

WM300-L Chair Rail

Curwensville Moulding and Millwork

CH 4

1-1/16” x 3”

KNIFE NUMBER

LM-00006 LM 00006 Chair Rail

Curwensville Moulding and Millwork

1-3/32” x 2-19/32”

CH 5

KNIFE NUMBER

LM-00014 WM390 Chair Rail

Curwensville Moulding and Millwork

CH 6

1” x 3-5/8”

KNIFE NUMBER

LM-00022 Chair Rail

Curwensville Moulding and Millwork

7/8” x 3-5/32”

CH 7

KNIFE NUMBER

LM-00037 Chair Rail

Curwensville Moulding and Millwork

CH 8

1-19/64” x 4”

KNIFE NUMBER

LM-00041 Chair Rail

Curwensville Moulding and Millwork

3/4” x 3-1/2”

CH 9

KNIFE NUMBER

LM-00073 Chair Rail

Curwensville Moulding and Millwork

CH 10

5/8” x 2”

KNIFE NUMBER

LM-00078 Chair Rail

Curwensville Moulding and Millwork

1/2” x 3”

CH 11

KNIFE NUMBER

LEZ020 Chair Rail

Curwensville Moulding and Millwork

CH 12

1-7/8” x 4-1/4”

KNIFE NUMBER

LEZ021 Chair Rail

Curwensville Moulding and Millwork

3/4” x 4-3/4”

CH 13

KNIFE NUMBER

WM936-L Door Stop

Curwensville Moulding and Millwork

Stocked at most Lezzer locations in oak – OAK936, 7OAK936

7/16” x 1-3/8”

SSQ 1

KNIFE NUMBER

WM886-L Door Stop

Curwensville Moulding and Millwork

Stocked at most Lezzer locations in oak – OAK886, 7OAK886

SSQ 2

3/8” x 1-3/8”

KNIFE NUMBER

WM126-L Base Shoe

Curwensville Moulding and Millwork

Stocked at most Lezzer locations in oak – OAK126

1/2” x 3/4”

SSQ 3

KNIFE NUMBER

LM-00007 Glass Bead

Curwensville Moulding and Millwork

SSQ 4

1/2”x 9/16”

KNIFE NUMBER

LM-00043 7/8” Quarter Round

Curwensville Moulding and Millwork

7/8” x 7/8”

SSQ 5

KNIFE NUMBER

LM-00048 Beaded 1/4 Round

Curwensville Moulding and Millwork

SSQ 6

1-1/4” x 1-1/4”

KNIFE NUMBER

LM-00061 ¼” Quarter Round

Curwensville Moulding and Millwork

1/4” x 1/4”

SSQ 7

KNIFE NUMBER

LM-00062 Half Round

Curwensville Moulding and Millwork

SSQ 8

1/4” x 1/2”

KNIFE NUMBER

LM-00071 WM131 Base Shoe

Curwensville Moulding and Millwork

1/2” x 3/4”

SSQ 9

KNIFE NUMBER

LEZ012 Door Bead

Curwensville Moulding and Millwork

SSQ 10

13/32� x specify depth

KNIFE NUMBER

LEZ014 Eased Edge Stop

Curwensville Moulding and Millwork

specify thickness x specify width

SSQ 11

KNIFE NUMBER

LEZ028 Shingle Mould

Curwensville Moulding and Millwork

SSQ 12

11/16” x 1”

KNIFE NUMBER

LEZ029 Scotia Stop

Curwensville Moulding and Millwork

1/2” x 3/4”

SSQ 13

KNIFE NUMBER

LEZ036 Base shoe

Curwensville Moulding and Millwork

SSQ 14

1/2” x 7/8”

KNIFE NUMBER

LEZ040 Chamfer Strip

Curwensville Moulding and Millwork

1” x 1”

SSQ 15

KNIFE NUMBER

WM206-L Outside Corner

Curwensville Moulding and Millwork

Stocked at most Lezzer locations in oak – OAK206, 8OAK206

3/4” x 3/4”

OSC 1

KNIFE NUMBER

LM-00056 Outside Corner

Curwensville Moulding and Millwork

Inside coverage 1-7/16”

OSC 2

1-3/4” x 1-3/4”

KNIFE NUMBER

LM-00063 2 Piece Outside Corner

Curwensville Moulding and Millwork

9/16” x specify width”

OSC 3

KNIFE NUMBER

35-L & 55-L Landing Tread

Curwensville Moulding and Millwork

Stocked at some locations in oak and SYP – ON3, LT312

St k d att some locations l ti i oak k and d SYP – ON5, ON5 LT512 Stocked in

1” x specify depth

SLT 1

KNIFE NUMBER

TREAD-L Stair Tread

Curwensville Moulding and Millwork

SLT 2

1-1/16� x specify depth

KNIFE NUMBER

LEZ032 Modified Stair Tread

Curwensville Moulding and Millwork

2-1/2� x specify depth

SLT 3

KNIFE NUMBER

BEAD-L Tongue and Groove

Curwensville Moulding and Millwork

23/32” x 5-3/8” or 7-3/8”

T&G 1

KNIFE NUMBER

V-PANEL-L Tongue and Groove

Curwensville Moulding and Millwork

T&G 2

23/32” x 5-3/8” or 7-3/8”

KNIFE NUMBER

DECKING-L Tongue and Groove

Curwensville Moulding and Millwork

specify width and specify full thickness or surface to 1-3/8�

T&G 3

KNIFE NUMBER

LM-00025 Beaded T & G

Curwensville Moulding and Millwork

T&G 4

47/64” x 3”

KNIFE NUMBER

LM-00049 Beaded T & G

Curwensville Moulding and Millwork

11/16� x specify width

T&G 5

KNIFE NUMBER

LM-00053 Eased Edge T & G

Curwensville Moulding and Millwork

T&G 6

11/16” x specify width”

KNIFE NUMBER

LM-00054 T & G Pattern Stock

Curwensville Moulding and Millwork Same pattern as stock codes 188TG2, 1812TG2, 1816TG2

23/32 x 5-3/8” or 7-1/8”

T&G 7

KNIFE NUMBER

LEZ030 Tongue & Groove

Curwensville Moulding and Millwork

T&G 8

1-1/2� x specify width

KNIFE NUMBER

LEZ038 Tongue & Groove

Curwensville Moulding and Millwork

2-1/2� x specify width

T&G 9

KNIFE NUMBER

LEZ041 Tongue & Groove

Curwensville Moulding and Millwork

T&G 10

Azek Deck Tongue & Groove

KNIFE NUMBER

WAINSCOT4-L Wainscot

Curwensville Moulding and Millwork

3/8” x 4-1/8”

T&G 11

KNIFE NUMBER

FLOORING-L Flooring

Curwensville Moulding and Millwork

T&G 12

3/4 x specify width

KNIFE NUMBER

1196T-L Extension Jamb

Curwensville Moulding and Millwork

21/32� x specify depth

JEJ 1

KNIFE NUMBER

1196W-L C Casement t Extension Jamb

Curwensville Moulding and Millwork For 2 x 4 Construction

For 2 x 6 Construction

JEJ 2

11/16� x specify depth

KNIFE NUMBER

200-L Extension Jamb

Curwensville Moulding and Millwork For 2 x 4 Construction

For 2 x 6 Construction

21/32� x specify depth

JEJ 3

KNIFE NUMBER

Jamb-L Door Jamb

Curwensville Moulding and Millwork

JEJ 4

3/4� x specify width

KNIFE NUMBER

LEZ013 5/4 Door Jamb

Curwensville Moulding and Millwork

1” x specify width”

JEJ 5

KNIFE NUMBER

Stool-L Window Stool

Curwensville Moulding and Millwork

1� x specify depth

ST 1

KNIFE NUMBER

LM-00072 Window Stool

Curwensville Moulding and Millwork

ST 2

3/4” x specify depth”

KNIFE NUMBER

LM-00079 Window Stool

Curwensville Moulding and Millwork

1-1/16” x specify depth”

ST 3

KNIFE NUMBER

TREAD-L Stool

Curwensville Moulding and Millwork

ST 4

1-1/16� x specify width

KNIFE NUMBER

6010-L Handrail

Curwensville Moulding and Millwork

Filler for 6010 and 6045 Plowed

2-1/4� x 2-3/8

HR 1

KNIFE NUMBER

6045-L Shoe rail

Curwensville Moulding and Millwork Filler for 6010 and 6045 Plowed

HR 2

3/4” x 2-1/4”

KNIFE NUMBER

WM231-L Handrail

Curwensville Moulding and Millwork

1-1/2� x 1-11/16

HR 3

KNIFE NUMBER

WM240-L Handrail

Curwensville Moulding and Millwork

HR 4

1-1/4� x 2-1/4

KNIFE NUMBER

LM-00021 Handrail

Curwensville Moulding and Millwork

1-1/2” x 5-1/2”

HR 5

KNIFE NUMBER

LM-00042 Handrail

Curwensville Moulding and Millwork

HR 6

1-5/16” x 2”

KNIFE NUMBER

LM-00058 Handrail

Curwensville Moulding and Millwork

1-1/2” x 5-1/2”

HR 7

KNIFE NUMBER

LM-00067 Handrail

Curwensville Moulding and Millwork

HR 8

1-3/8” x 1-1/2”

KNIFE NUMBER

LOGSIDINGTG-L Log Siding

Curwensville Moulding and Millwork

1-3/8” x 7-1/8”

SD 1

KNIFE NUMBER

LOGSIDINGSL-L Log Siding

Curwensville Moulding and Millwork

SD 2

1-1/2” x 7-1/8”

KNIFE NUMBER

2x6T&G Log Siding

Curwensville Moulding and Millwork

1-3/8” x 5-3/8”

SD 3

KNIFE NUMBER

LM-00027 Log Siding

Curwensville Moulding and Millwork

SD 4

3/4” x 5-3/8”

KNIFE NUMBER

LM-00028B Log Siding

Curwensville Moulding and Millwork

1-1/4” x 6-3/4”

SD 5

KNIFE NUMBER

LM-00036 Log Siding

Curwensville Moulding and Millwork

SD 6

1-3/8” x 5-1/8”

KNIFE NUMBER

LM-00055 Log Siding

Curwensville Moulding and Millwork

1-3/8” x 3-3/8”

SD 7

KNIFE NUMBER

LM-00065 Siding

Curwensville Moulding and Millwork

SD 8

1-1/2” x 7-5/16”

KNIFE NUMBER

LEZ018 Siding

Curwensville Moulding and Millwork

11-16” x 5-7/16”

SD 9

KNIFE NUMBER

LEZ031 Log Siding

Curwensville Moulding and Millwork

SD 10

1-1/2” x 11-1/8”

KNIFE NUMBER

LM-00029 WM77 Panel Cap

Curwensville Moulding and Millwork

11/16” x 2-1/4”

MISC 1

KNIFE NUMBER

LM-00045 Panel Cap

Curwensville Moulding and Millwork

MISC 2

11/16” x 1-5/8”

KNIFE NUMBER

LM-00057 2 x __

Curwensville Moulding and Millwork 2x profile

1-1/2” x specify width”

MISC 3

KNIFE NUMBER

LM-00074 Backband

Curwensville Moulding and Millwork

MISC 4

1” x 1-7/8”

KNIFE NUMBER

LM-00076 Porch Top Rail

Curwensville Moulding and Millwork

2-1/8” x 3-15/16”

MISC 5

KNIFE NUMBER

LM-00077 Porch Bottom Rail

Curwensville Moulding and Millwork

MISC 6

3/4” x 4”

KNIFE NUMBER

LEZ025 Porch Rail Top

Curwensville Moulding and Millwork

2-7/8” x 4-7/16”

MISC 7

KNIFE NUMBER

LEZ026A Rail Pickets

Curwensville Moulding and Millwork

MISC 8

1-1/16” x 1-3/4”

KNIFE NUMBER

LEZ026B Rail Picket

Curwensville Moulding and Millwork

1-5/16” x 2-15/64”

MISC 9

KNIFE NUMBER

LEZ027 Porch Bottom Rail

Curwensville Moulding and Millwork

MISC 10

2-13/16” x 3-5/8”

KNIFE NUMBER

LEZ028 Shingle Mould

Curwensville Moulding and Millwork

11/16” x 1”

MISC 11

KNIFE NUMBER

LEZ029 Scotia Stop

Curwensville Moulding and Millwork

MISC 12

1/2” x 3/4”

KNIFE NUMBER

LEZ040 Chamfer Strip

Curwensville Moulding and Millwork

1” x 1”

MISC 13

KNIFE NUMBER

LEZ041 Tongue & Groove

Curwensville Moulding and Millwork

MISC 14

Azek Deck Tongue & Groove

KNIFE NUMBER

LEZ042 Fascia - rabbet/ dado

Curwensville Moulding and Millwork

1-1/8” x 4-3/4”

MISC 15

KNIFE NUMBER

LEZ043 Fascia - Rabbet

Curwensville Moulding and Millwork

MISC 16

1� x specify height

KNIFE NUMBER

LEZ043B Soffit – Rabbet & Dado

Curwensville Moulding and Millwork

3/4” x specify width

MISC 17

Moulder Knives # CUTTER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

DESCRIPTION 3-1/4" CUSTOM FLUTED CASING D753, BEADED CSG - INSIDE RADIUS D753, BEADED CSG - OUTSIDE RADIUS D377, 3-1/2" BEADED CASING WM445, 3-1/4" CASING WM361W, 3-1/2" FE CASING WEB 154 CASING D361M, 3-1/2" FE CASING 3-1/2" CUSTOM REEDED CASING D331M, 3-1/2" FE CASING PEACHTREE 3-1/2" CASING MORGAN A161 CASING ADAMS CGM31F CASING D379, 3-5/8" CASING ATLANTA #___, 3-1/2" CASING 3/4" X 3-1/4" FE CUSTOM CASING 3/4" X 3-1/2" CUSTOM COLONIAL CSG (EGS) 4" CUSTOM CASING 3" POPLAR CSG (STONEBRIDGE) BEADED CASING D371, 2-1/2" BEADED CASING 1-3/4" CUSTOM BACK BAND D361, 2-1/2" FE CASING 2" CUSTOM BACK BAND 1" BACK BAND MOULDING 1-7/8" BACK BAND MOULDING CUSTOM BACK BAND CUSTOM EDGE BAND 2-3/4" CUSTOM CASING 2-13/16" CUSTOM CASING D297 CHAIR RAIL JCS1501 BASE CAP 2-1/4" CROWN MOULDING CUSTOM BED MOULDING THRESHOLD CUTTER, 1/4" SLOPE IN 4-1/2" 4-1/2" CUSTOM CASING 4-5/8" CUSTOM BED MOULDING D49, 3-5/8" CROWN D47, 4-5/8" CROWN 4-5/16" CUSTOM CASING 5-1/2" CUSTOM CASING JSC 1642 CASING JSC 1611 CASING 7/8" X 2" BASE CAP 2-3/16" COVE MOULDING D366, 2-1/4" FE CASING

PAGE # TEMPLATE C-1 Y C-1 Y C-1 Y C-1 Y C-1 Y C-1 Y C-1 Y C-1 Y C-1 Y C-1 Y C-2 Y C-2 Y C-2 Y C-2 Y C-2 Y C-2 Y C-2 Y C-2 Y C-2 Y C-2 Y C-3 Y D-1 Y C-3 Y D-1 Y D-1 Y D-1 Y D-1 Y L-2 Y C-3 Y C-3 Y B-1 Y A-3 Y E-8 N E-5 Y F-1 N C-4 Y E-3 Y E-1 Y E-1 Y C-4 Y C-4 Y C-4 Y C-3 Y A-1 Y E-5 Y C-3 Y

# CUTTER 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94

DESCRIPTION 1-3/4" CHAIR RAIL D376, 2-1/4" COLONIAL CASING 2-1/4" CUSTOM CASING D327, 2-1/4" RANCH CASING 1-3/8" BACK BAND/FRAME MLDG D180 BRICK MOULDING 1" BACK BAND/FRAME MLDG 1-3/8" BACK BAND MOULDING 1-1/2" BACK BAND MOULDING 7/8" FRAME MLDG 1-1/2" PICTURE FRAME/WAINSCOAT MLDG CUSTOM BASE CAP 1-3/8" BACK BAND MOULDING ROHRERSTOWN PLATE RAIL D53 2-5/8" CROWN MLDG 3-9/16" CUSTOM CROWN MOULDING 2-7/8" COVE MOULDING 3-3/4" CUSTOM CROWN MOULDING 4" CUSTOM CASING 3-1/4" CUSTOM CASING 3-3/4" CUSTOM CASING 4" CUSTOM CASING 3-1/2" CUSTOM CASING 3" CUSTOM BASE CAP 6-5/8" 3 PC CUSTOM CROWN MOULDING 4" CUSTOM CASING 7-3/4" CUSTOM BASE (SEE CAP KNIFE #58) 4" CUSTOM CHAIR RAIL 5-1/4" CUSTOM CASING BAR RAIL 4-3/4" CUSTOM CASING (2 PIECE) 7" BEVEL TOP HANDRAIL 4-5/8" CUSTOM CROWN MOULDING AWI 2661 CROWN MOULDING D-45 5-1/4" CROWN MOULDING AWI 2361 CROWN MOULDING CUSTOM OG BASE 6" RANCH BASE 4-1/2" CUSTOM CROWN MLD'G. 6-5/8" 3 PC CUSTOM CROWN MOULDING 5" CUSTOM CROWN MLDG - CONTEMP. DESIGN 5-1/8" CUSTOM CROWN MLDG - CONTEMP. DESIGN CUSTOM BASE 3-3/4" CUSTOM CASING 5-7/8 CUSTOM BED MLD'G 4-3/8" CUSTOM CASING 5-1/2" CUSTOM CASING 4" CUSTOM CHAIR RAIL

PAGE # TEMPLATE B-2 Y C-3 Y C-3 Y C-3 Y D-1 Y C-3 Y D-1 Y D-1 Y D-1 Y D-1 Y D-1 Y A-2 Y D-1 Y E-5 Y E-1 Y E-1 Y E-5 Y E-2 Y C-5 Y C-5 Y C-5 Y C-5 Y C-5 Y A-1 Y E-3 Y C-5 Y A-2 Y B-1 Y C-4 Y F-1 Y C-9 Y G-4 Y E-1 Y E-2 Y E-1 Y E-2 Y A-1 Y A-1 Y E-2 Y E-3 Y E-4 Y E-4 Y A-1 Y C-5 Y E-4 N C-6 Y C-6 Y B-1 Y

# CUTTER 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142

DESCRIPTION 4-1/4" CUSTOM CASING 4-1/4" CUSTOM CASING 4-1/4" CUSTOM CHAIR RAIL / MULLION 4-1/4" CUSTOM CHAIR RAIL / MULLION 4" CUSTOM CROWN MLDG 6" STRAIGHT KNIFE 4-1/4" CUSTOM CASING 3-1/2" CUSTOM CASING BEADED TONGUE & GROOVE 1-5/8" CUSTOM BACK BAND 1-3/4" BASE CAP 4-5/8" CUSTOM CASING 1-1/8" CUSTOM BACK BAND - GREYSTONE 1-1/2" REED MOULDING 2-1/8" CUSTOM BASE CAP 2-3/4" CUSTOM CASING 2-5/8" CUSTOM CROWN MOULDING 1-1/4" DIA. FULL ROUND 2-7/16" BASE CAP 3-1/2" CUSTOM CHAIR RAIL 1-3/4" CUSTOM BACK BAND CUSTOM BASE MOULDING 1-1/4" CROWN MOULDING 3" CUSTOM CASING 1-3/8" JC3901 3-3/8" CUSTOM CROWN MOULDING 3" CUSTOM CHAIR RAIL 1-3/4" BASE CAP 2-1/4" CUSTOM CASING 2-5/8" RANCH CASING 2-1/16" BASE CAP CUSTOM BASE MOULDING CUSTOM CASING CUSTOM BACK BAND 1-5/8" CROWN MOULDING 2" BASE CAP OG BASE MOULDING BASE MOULDING 2-3/16" BASE BAND 1-1/2" BASE CAP 15/16" CUSTOM BACK BAND 2-1/2" CUSTOM CHAIR RAIL 1-1/8" BACK BAND 3-1/2" CUSTOM HANDRAIL 3" CUSTOM CHAIR RAIL 2-13/16" CUSTOM CHAIR RAIL C6719 BENDING RAIL MOLD C6010 BENDING RAIL MOLD

PAGE # TEMPLATE C-6 Y C-6 Y B-1 Y B-1 Y E-2 Y N C-7 Y C-9 N J-1 N D-1 Y A-2 Y C-6 Y D-2 Y L-2 Y A-1 Y C-5 Y E-1 Y G-5 Y A-2 Y B-1 Y D-2 Y A-2 Y E-1 Y C-5 Y L-2 Y E-2 Y B-1 Y A-2 Y C-5 Y C-5 Y A-2 Y A-2 Y C-5 Y D-1 Y E-1 Y A-2 Y A-3 Y A-3 Y D-2 Y A-3 Y D-2 Y B-2 N D-2 N G-1 Y B-2 Y B-2 Y G-1 Y G-1 N

# CUTTER 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190

DESCRIPTION CUSTOM CASING 1-1/4" BACK BAND 1-1/4" BACK BAND 1-3/16" BED MOULDING BULLNOSE EDGE BASE MOULDING BASE CAP CUSTOM CASING 1-3/8" BACK BAND 3" CHAIR RAIL BASE CAP CUSTOM CASING 1-1/4" BACK BAND 1-1/8" BACK BAND 1-5/8" CROWN MOULDING BASE MOULDING BASE MOULDING 3-1/2" CUSTOM CASING 1-7/16" BASE CAP CUSTOM HANDRAIL - TOP CUSTOM HANDRAIL - SIDE 1-1/8" BASE CAP 3-3/16" BED MOULDING 3-3/16" BED MOULDING 2" COVE MOULDING 1-1/4" BACK BAND 3/4" BEAD MOULDING 2-5/8" CUSTOM CASING MA 97 FJ CASING 2-3/4" CUSTOM CASING 1-1/2" CUSTOM HANDRAIL 1-1/2" COVE MOULDING JCS 1554 BASE MOULDING COFFMAN C6210 HANDRAIL 1-1/4" BACK BAND BASE MOULDING 2-7/8" CUSTOM CASING HAND RAIL (SIDE) HAND RAIL (TOP) BOTTOM RAIL (SIDE) BOTTOM RAIL (TOP) GERMAN SIDING BASE CAP CUSTOM BASE D75 1 5/8" BED MOULDING CUSTOM HANDRAIL CUSTOM HANDRAIL 1 1/2" BACK BAND

PAGE # TEMPLATE C-11 Y D-2 Y D-2 Y E-5 Y L-1 Y A-3 Y A-3 Y C-10 Y D-2 Y B-2 Y A-3 Y C-10 Y D-2 Y D-2 Y E-5 Y A-3 Y A-3 Y C-11 Y A-3 Y G-1 Y G-1 Y A-3 Y E-7 Y E-7 Y E-7 Y D-2 Y L-1 Y C-11 Y C-11 Y C-11 Y G-3 Y E-5 Y A-4 Y G-3 Y D-2 Y A-4 Y C-11 Y G-3 Y G-3 Y G-3 Y F-2 A-4 A-4 E-5 G-3 G-4 D-3

Y Y Y Y Y Y Y

# CUTTER 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238

DESCRIPTION CUSTOM CHAIR RAIL 2 3/4" CUSTOM CASING 1 3/4" HAND RAIL BEADED TONGUE & GROOVE BEADED TONGUE & GROOVE HANDRAIL (TOP) HANDRAIL (SIDE) 3 1/2" CUSTOM CASING D623 BASE 3-1/2" CUSTOM CASING 2-3/4" CUSTOM CASING D163 BASE 3-1/2" CUSTOM CASING 97M CASING 3-1/2" CUSTOM CASING 2-1/4" CUSTOM CASING 2-5/8" CUSTOM CASING 3-5/8" CUSTOM CASING 3-1/2" CUSTOM CASING 1-5/8" BACKBAND 1" BACKBAND 1-13/16" BASE CAP 1-3/8" BASE CAP 1-11/16" BACKBAND 3-1/2" CROWN MOULDING 1-1/16" PANEL MOULDING 1-3/4" BASE CAP (WM-217) 1-11/16" CROWN MOULDING 13/16" EDGE MOULDING BASE MOULDING CUSTOM CROWN MOULDING 2-1/4" EDGE BAND 1/2" TONGUE FOR #222 PANEL MOULDING 9/16" BEAD 3/8" BEAD 7/8" BEAD 5/8" BEAD 1/4" BEAD 3/8" BEAD 1-5/8" BASE CAP 2" BASE CAP 1-1/4" BACK BAND 2-5/8" CUSTOM CASING 1-3/8" BEAD 1-15/16" BASE CAP 1-1/8" PANEL MOULDING (WM183) 1/2" STOP MOULDING (WM147)

PAGE # TEMPLATE B-3 Y C-11 Y G-4 Y J-1 Y J-1 Y G-4 Y G-4 Y C-11 Y A-4 Y C-11 Y C-13 Y A-4 Y C-13 Y C-13 Y C-13 Y C-13 Y C-13 Y C-13 Y C-13 Y D-3 Y D-3 Y A-4 Y A-4 Y D-3 Y E-5 Y L-2 Y A-4 Y E-5 Y L-1 Y A-4 Y E-5 Y L-1 Y L-1 Y L-1 Y L-1 Y L-1 Y L-1 Y L-1 Y L-1 Y L-1 Y A-5 Y A-5 Y D-3 Y C-13 Y L-1 Y A-5 Y L-1 Y L-2 Y

# CUTTER 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286

DESCRIPTION 2-1/2" DIA HANDRAIL BASE MOULDING 2-3/4" BED MOULDING REEDED CASING 1-1/8" BACK BAND 2-1/2" CHAIR RAIL 11/16" COVE MOULDINGS 7/16" COVE MOULDING 1-5/8" BACK BAND MOULDING 3-5/16" CROWN MOULDING BASE MOULDING BASE CAP BASE CAP BASE MOULDING BASE CAP BACKBAND BEADED TONGUE & GROOVE 2" CHAIR RAIL MOULDING CHAIR RAIL BACKER 2-1/2" CASING (WM351) BASE MOULDING 1-5/8" CAP MOULDING 3-1/2" CASING 3-1/2" CASING 1-1/4" EDGE MOULDING 2-3/8" CASING 1-1/2" BACK BAND 1-3/4" BULLNOSE 1-3/4" EDGE MOULDING 2-3/4" CASING 3-1/2" CASING 1-7/8" BASE CAP 1-3/4" BACK BAND BASE MOULDING 1-7/16" EDGE MOULDING 1-3/4" CHAIR RAIL 3-1/8" CASING C6010 HANDRAIL 3-7/8" HANDRAIL 3" CASING 3-1/8" CROWN MOULDING PANEL MOULDING BASE MOULDING 2-5/8" CROWN MOULDING 3-5/16" HANDRAIL 2-3/8" BASE CAP 1-5/8" BACK BAND 2-1/4" CROWN MOULDING

PAGE # TEMPLATE G-5 Y A-5 Y E-9 Y C-13 Y D-3 Y B-3 Y L-2 Y L-2 Y D-3 Y E-11 Y A-5 Y A-5 Y A-5 Y A-5 Y A-5 Y D-3 Y J-1 Y B-3 Y B-3 Y C-15 Y A-5 Y L-2 Y C-15 Y C-15 Y L-2 Y C-15 Y D-3 Y L-2 Y L-2 Y C-15 Y C-15 Y A-5 Y D-3 Y A-4 Y L-2 Y B-3 Y C-15 Y G-1 Y G-4 Y C-15 Y E-13 Y L-2 Y A-6 Y E-13 Y G-5 Y A-6 Y D-3 Y E-13 Y

# CUTTER 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334

DESCRIPTION 2-3/8" CASING 2-3/4" CHAIR RAIL 1-5/8" BEAD 3" CHAIR RAIL 1-3/16" CROWN MOULDING BASE MOULDING BASE MOULDING 1-3/8" BACK BAND 3-1/2" CASING 2" CASING BASE MOULDING 1-1/16" BACK BAND BASE MOULDING BASE CAP BASE MOULDING BASE CAP BACK BAND 4-1/4" CUSTOM CASING 4-1/4" CUSTOM CASING 4-1/4" CUSTOM CASING 4-1/4" CUSTOM CASING 4-1/2" JCS 1646 CASING 5" CUSTOM CROWN MLDG 5" CUSTOM CROWN MLDG 5-1/8" CUSTOM CROWN MLDG 4-3/8" CUSTOM CASING 4-13/16" CUSTOM CASING 3-1/4" CUSTOM CASING 4-1/4" CUSTOM CASING 5" BED MOULDING 7-1/2" CUSTOM CROWN MOULDING 4" CUSTOM CASING JCS 3221 HANDRAIL 4-1/2" CUSTOM HANDRAIL 3-1/2" CUSTOM BOTTOM RAIL 6-3/8" CUSTOM CROWN MOULDING 4-3/4" CUSTOM HANDRAIL 3-13/16" CUSTOM CASING D390M CHAIR RAIL CUSTOM CASING 3-3/4" CUSTOM CASING PLINTH BLOCK 3-1/4" CUSTOM CASING 4-3/4" REEDED CASING 3-7/8" CUSTOM CHAIR RAIL JCS 1671 CASING 4" CUSTOM CASING 3 3/8" CUSTOM CHAIR RAIL

PAGE # TEMPLATE C-15 Y B-2 Y L-2 Y B-4 Y E-14 Y A-6 Y A-6 Y D-3 Y C-15 Y C-15 Y A-6 Y D-4 Y A-6 Y A-6 Y A-6 Y A-6 Y D-4 Y C-8 Y C-8 Y C-8 Y C-7 Y C-7 Y E-4 Y E-3 Y E-4 Y C-7 Y C-8 Y C-8 Y C-7 Y E-3 Y E-6 Y C-9 Y G-1 Y G-2 Y G-2 Y E-6 N G-2 N C-9 Y B-2 Y C-12 Y C-10 Y C-10 Y C-11 Y C-12 Y B-2 Y C-12 Y C-12 Y B-3 Y

# CUTTER 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382

DESCRIPTION 4 7/8" CUSTOM CHAIR RAIL 3" BASE CAP 4 7/8" REED CASING 3-9/16" CUSTOM CHAIR RAIL 5-5/16" BED MOULIDNG 3-7/8" COVE MOULDING 4-11/16" CROWN MOULDING 4" CUSTOM CASING 3" HANDRAIL 5-3/16" CUSTOM CROWN MOULDING 4-7/16" BAR RAIL 5-1/8" CUSTOM CHAIR RAIL 5-9/16" CROWN MOULDING 12-1/4" CROWN MOULDING 12-1/4" 6-7/8" CROWN MOULDING 7-3/4" CROWN MOULDING #1 7-3/4" CROWN MOULDING #2 4" CROWN MOULDING 5-5/16" CROWN MOULDING 4-1/2" CROWN MOULDING 6" COVE MOULDING 4-5/8" COVE MOULDING 5" CROWN MOULDING 3-1/2" CROWN MOULDING 4" CROWN MOULDING 4-1/4" CROWN MOULDING 5-3/16" CROWN MOULIDNG 4-5/16" CROWN MOULDING 4-11/16" CROWN MOULDING BASE MOULDING 4-3/8" CROWN MOULDING 2-3/8" HANDRAIL 4-7/8" CROWN MOULDING 5-1/2" CROWN MOULDING 4-1/4" CASIN (5010M) 4-1/4" CASING (2 PC) (5010M) 5-3/4" CROWN MOULDING 3-3/4" CROWN MOULDING 2-7/16" CROWN MOULDING 3-7/8" CASING 3-9/16" HANDRAIL 3-1/4" CASING 2-1/8" CHAIR RAIL 6" CROWN MOULDING 3" CROWN MOULDING 5" CROWN MOULDING 4-1/2" BASE MOULDING

PAGE # TEMPLATE B-3 Y A-4 Y C-10 Y B-3 Y E-7 Y E-8 Y E-8 Y C-14 Y G-5 Y E-6 Y F-1 Y B-2 Y E-6 Y E-7 Y E-7 Y E-8 Y E-9 Y E-9 Y E-8 Y E-9 Y E-9 Y E-10 Y E-10 Y E-9 Y E-9 Y E-10 Y E-10 Y E-11 Y E-11 Y E-11 Y A-5 Y E-11 Y G-4 Y E-10 Y E-11 Y C-14 Y C-14 Y E-12 Y E-12 Y E-12 Y C-14 Y G-5 Y C-14 Y B-3 Y E-12 Y E-12 Y E-12 Y A-6 Y

# CUTTER 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430

DESCRIPTION 4-3/16" CROWN MOULDING 3-3/4" CASING 5-1/16" CROWN MOULDING 4-1/2" BASE 4-3/4" CROWN MOULDING 5-1/2" CASING 6-3/4" BASE MOULDING 5-3/4" CROWN MOULDING 2-3/8" CHAIR RAIL 4" CROWN MOULDING 5-7/16" CROWN MOULDING 2" CROWN MOULDING 5-1/4" CROWN MOULDING HANDRAIL TOP HANDRAIL SIDE 8-1/2" COVE MOULDING 4-1/8" CROWN MOULDING 2" CHAIR RAIL 4-1/2" CASING 4-11/16" PLINTH BLOCK 3-15/16" COVE & MOULDING 3-5/8" CHAIR RAIL 5-5/16" CROWN MOULDING 6" CHAIR RAIL 3-5/8" CASING 4-1/2" CASING 3-7/8" CROWN MOULDING 3-5/8" CROWN MOULDING 5-3/4" CHAIR RAIL 5-1/2" CASING 3-11/16" CASING JELDWEN 6710 HANDRAIL JCS 2609 PICTURE RAIL 5-3/16" CROWN MOULIDNG 5-1/16" CROWN MOULDING 4-1/8" CROWN MOULDING 10-3/4" MANTLE MOULDING 2-3/4" HANDRAIL 1-7/8" BASE CAP 4-3/4" CASING 8-1/8" CROWN MOULDING KNIFE #1 8-1/8" CROWN MOULDING KNIFE #1

PAGE # TEMPLATE E-12 Y C-14 Y E-12 Y A-6 Y E-8 Y C-9 Y A-1 Y E-13 Y B-3 Y E-13 Y E-13 Y E-13 Y E-14 Y G-5 Y G-5 Y E-14 Y E-14 Y B-4 Y C-12 Y C-12 Y E-14 Y B-4 Y E-14 Y B-4 Y C-14 Y C-6 Y E-8 Y E-14 Y B-4 Y C-16 Y C-16 Y G-6 Y F-2 Y E-15 Y E-15 Y E-15 Y F-2 Y G-6 Y A-7 Y C-16 Y E-16 Y E-16 Y

# CUTTER 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478

DESCRIPTION

11/16" BEAD CHAIR RAIL 1-3/4" PICTURE RAIL 3/4" BASE MOULDING 2-1/8" BASE CAP 6910S HANDRAIL / TOP 6910S HANDRAIL / SIDE 1-1/2" BASE CAP 1-5/16" BACK BAND JCS 1529 BASE MOULDING JCS 1536 BASE MOULDING 1-1/4" BASE CAP 1" BACK BAND

PAGE # TEMPLATE

L-2 B-4 F-2 A-7 A-7 G-1 G-1 A-7 D-4 A-7 A-7 A-7 D-4

Y Y Y Y Y Y Y Y Y Y Y Y Y

# CUTTER 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526

DESCRIPTION 1-5/16" BACK BAND RB3 CASING PIC-WIC SHIPLAP 2-9/16" CROWN MOULDING 3/4" BASE MOULDING 4" CASING 1-3/4" HANDRAIL 1-1/4" BASE CAP 1-1/2" BASE CAP 1" BASE CAP 11/16" BASE MOULDING 11/16" BASE MOULDING 2" BASE CAP 3-1/8" CROWN MOULDING 2-1/8" BACK BAND BASE MOULDING 3-3/8" CROWN MOULDING 3-1/2" CROWN MOULDING 1-7/8" BASE CAP

PAGE # TEMPLATE D-4 Y C-15 Y J-1 Y E-15 Y A-7 Y C-17 Y G-6 Y A-7 Y A-7 Y A-7 Y A-7 Y A-7 Y A-7 Y E-15 Y D-4 Y A-7 Y E-15 Y E-15 Y A-8 Y

# CUTTER 527 528 529 530 531 532 533 534 535 536 537

DESCRIPTION

PAGE # TEMPLATE

SHAPER CUTTERS # CUTTER SC1 SC2 SC3 SC4 SC5 SC6 SC7 SC8 SC9 SC10 SC11 SC12 SC13 SC14 SC15 SC16 SC17 SC18 SC19 SC20 SC21 SC22 SC23 SC24 SC25 SC26 SC27 SC28 SC29 SC30 SC31 SC32 SC33 SC34 SC35 SC36 SC37 SC38 SC39 SC40 SC41 SC42 SC43 SC44 SC45 SC46

DESCRIPTION 3/4" RAISED PANEL 3/4" RAISED PANEL 5/8" RAISED PANEL 1" RAISED PANEL 3/4" RAISED PANEL 1-1/4" X 1-1/4" COVE & 1" X 1-1/2" COVE 1-1/4" X 1-1/4" COVE MLDG 7/8" CAP MLDG 1-1/8" EDGE MOULDING 1" RAISED PANEL 5/8" RAISE PANEL 1-1/4" TONGUE & GROOVE 3-1/8" CUSTOM CASING 1-7/16" OG BASE CAP 1-5/8" CROWN MOULDING BACK BAND MOULDING 1-9/16" BASE CAP JAMB BEVEL KNIFE 7/8" BULLNOSE 1-3/16" ELONGATED BULLNOSE 2-1/2" CUSTOM HANDRAIL D75 1-5/8" BED MLDG & 1-5/8" LOUVER TONGUE & GROOVE SQ EDGE 1-1/2" MAT'L 1-1/4" BULLNOSE 1-1/2" OG BASE CAP 1-1/2" X 5-1/2" HANDRAIL 1-1/2" BULLNOSE 1-5/8" BASE CAP CUSTOM HANDRAIL RANCH STOP 1-3/4" BEADED EDGE MOULDING 3/4" GROOVE CUSTOM HANDRAIL 3-1/4" CUSTOM HANDRAIL 1-3/4" BACKBAND MOULDING BACK BAND MOULDING BACK BAND MOULDING 1-3/8" CAP MOULDING 1-3/4" BEADED EDGE MOULDING 3/4" BEADED T&G MANHEIM PLATE RAIL 3-1/2" CUSTOM CASING 1-1/4" CONTEMPORARY BASE RANCH CASING 1-1/8" SILL NOSING C-6719 MARION HANDRAIL (TOP)

PAGE # TEMPLATE SC-N1 N SC-N1 N SC-N1 N SC-N1 N N SC-N1 N SC-K1 SC-K1 N SC-K1 N SC-L2 N SC-N1 N SC-N1 N SC-J1 N SC-C1 N SC-A1 N SC-E1 N SC-D1 N SC-A1 N SC-M1 N SC-L2 N SC-L2 N SC-G1 N SC-E1 N SC-J1 N SC-L1 N SC-A1 N SC-G1 N SC-L1 N SC-A1 N SC-G2 N SC-M1 N SC-L2 N SC-J1 N SC-G2 N SC-G2 N SC-D1 N SC-D1 N SC-D1 N SC-A1 N SC-L2 N SC-J1 N SC-E1 N SC-C1 N SC-A1 N SC-C1 N SC-L1 Y SC-G2 N

SC47 SC48 SC49 SC50 SC51 SC52 SC53 SC54 SC55 SC56 SC57 SC60 SC61 SC62 SC63 SC64 SC65 SC66 SC67 SC68 SC69 SC70 SC71 SC72 SC73 SC74 SC75 SC76 SC77 SC78 SC79 SC80 SC81 SC82 SC83 SC84 SC85 SC86 SC87 SC88 SC89 SC90 SC91 SC92 SC93 SC94 SC95 SC96 SC97

C-6719 MARION HANDRAIL (SIDES) 2-1/4" BASE MOULDING 7/8" EDGE MOULDING OBECHE HANDRAIL C6042 1-7/16" BASE CAP 163E BASE MOULDING BASE MOULDING JAMB BEVEL KNIFE

SC-G2 SC-A1 SC-L2 SC-G3 SC-A1 SC-A2 SC-A2 SC-M1

N N N N N N N N

2-5/8" X 1-5/8" CUSTOM BOTTOM RAIL 1" RAISED PANEL COFFMAN 6010 HANDRAIL

SC-G1 SC-N1 SC-G1

N N N

C-6810 ART DECO HANDRAIL - TOP C-6810 ART DECO HANDRAIL - SIDE 2-5/8" X 2-5/8" CUSTOM HANDRAIL 2-1/2" BASE CAP

SC-G2 SC-G2 SC-G1 SC-A1

N N N N

SC98 SC99 SC100 SC101 SC102 SC103 SC104 SC105 SC106 SC107 SC108 SC109 SC110 SC111 SC112 SC113 SC114 SC115 SC116 SC117 SC118 SC119 SC120 SC121 SC122 SC123 SC124 SC125 SC126 SC127 SC128 SC129 SC130 SC131 SC132 SC133 SC134 SC135 SC136 SC137 SC138 SC139 SC140 SC141 SC142 SC143 SC144 SC145 SC146

TONGUE & GROOVE W/VEE 3/4" MATERIAL 9/16" BEAD OG STOP MOULDING 5/8" COVE MOULDING 7/8" OG BASE CAP D697 BASE MOULDING 1-3/4" BACKBAND MOULDING 3/4" BEADED T&G 1-1/8" BASE CAP 1-13/16" OG BASE CAP BEAD KNIFE 3/8" SHIP-LAP W/V-GROOVE 3/8" BEAD W/V-SCORE #633 MDF BASE 3/8" & 1/2" BEAD KNIFE 1/4" & 1/2" BEAD KNIFE 1-1/4" BACK BAND 13/16" ROUND OVER TONGUE & GROOVE CUSTOM CASING 1-3/8" BACK BAND 1-1/2" BACK BAND 2-3/4" CUSTOM CASING 3/4' EDGE MOULDING

SC-J1 SC-L1 SC-M1 SC-K1 SC-A1 SC-A1 SC-D1 SC-J1 SC-A1 SC-A1 SC-L1 SC-J1 SC-L2 SC-A1 SC-L2 SC-L2 SC-D1 SC-K1 SC-J1 SC-C1 SC-D1 SC-D1 SC-C1 SC-L2

N N N N N N N N N N N N N N N N N N N N N N N N

CUSTOM HANDRAIL

SC-G3

Y

3-1/4" CUSTOM HANDRAIL

SC-G2

Y

SC147 SC148 SC149 SC150 SC151 SC152 SC153 SC154 SC155 SC156 SC157 SC158 SC159 SC160 SC161 SC162 SC163 SC164 SC165 SC166 SC167 SC168 SC169 SC170 CS171 SC172 SC173 SC174 SC175 SC176 SC177 SC178 SC179 SC180 SC181 SC182 SC183 SC184 SC185 SC186 SC187 SC188 SC189 SC190 SC191 SC192 SC193 SC194 SC195

3/4" RAISED PANEL 3/4" RAISED PANEL 3/4" RAISED PANEL

SC-N1 SC-N1 SC-N1

Y Y Y

3-1/2" CUSTOM CROWN MOULDING 1-1/2" ROUNDOVER 2-1/8" ROUNDOVER 1-1/8" RAISED PANEL

SC-E1 SC-K1 SC-K1 SC-N2

N N N N

SC196 SC197 SC198 SC199 SC200 SC201 SC202 SC203 SC204 SC205 SC206 SC207 SC208 SC209 SC210 SC211 SC212 SC213 SC214 SC215 SC216 SC217 SC218 SC219 SC220

3/4" RAISED PANEL 1/2" RAISED PANEL

SC-N1 SC-N2

N N

ROSETTE PROFILES # CUTTER R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12

DESCRIPTION 1-15/16" PROFILE 2-3/8" PROFILE 3-1/8" PROFILE 2-7/8" PROFILE 3-3/8" PROFILE 2-1/2" PROFILE 3-1/2" PROFILE 3-1/2" PROFILE 2-7/8" PROFILE 3-3/8" PROFILE 3-1/16" PROFILE 4-1/16" PROFILE

PAGE R-1 R-1 R-1 R-1 R-1 R-1 R-1 R-1 R-2 R-2 R-2 R-2

TEMPLATE CARBIDE Y CARBIDE Y Y N Y Y Y Y Y Y

Moulder Knives # CUTTER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

DESCRIPTION 3-1/4" CUSTOM FLUTED CASING D753, BEADED CSG - INSIDE RADIUS D753, BEADED CSG - OUTSIDE RADIUS D377, 3-1/2" BEADED CASING WM445, 3-1/4" CASING WM361W, 3-1/2" FE CASING WEB 154 CASING D361M, 3-1/2" FE CASING 3-1/2" CUSTOM REEDED CASING D331M, 3-1/2" FE CASING PEACHTREE 3-1/2" CASING MORGAN A161 CASING ADAMS CGM31F CASING D379, 3-5/8" CASING ATLANTA #___, 3-1/2" CASING 3/4" X 3-1/4" FE CUSTOM CASING 3/4" X 3-1/2" CUSTOM COLONIAL CSG (EGS) 4" CUSTOM CASING 3" POPLAR CSG (STONEBRIDGE) BEADED CASING D371, 2-1/2" BEADED CASING 1-3/4" CUSTOM BACK BAND D361, 2-1/2" FE CASING 2" CUSTOM BACK BAND 1" BACK BAND MOULDING 1-7/8" BACK BAND MOULDING CUSTOM BACK BAND CUSTOM EDGE BAND 2-3/4" CUSTOM CASING 2-13/16" CUSTOM CASING D297 CHAIR RAIL JCS1501 BASE CAP 2-1/4" CROWN MOULDING CUSTOM BED MOULDING THRESHOLD CUTTER, 1/4" SLOPE IN 4-1/2" 4-1/2" CUSTOM CASING 4-5/8" CUSTOM BED MOULDING D49, 3-5/8" CROWN D47, 4-5/8" CROWN 4-5/16" CUSTOM CASING 5-1/2" CUSTOM CASING JSC 1642 CASING JSC 1611 CASING 7/8" X 2" BASE CAP 2-3/16" COVE MOULDING D366, 2-1/4" FE CASING

PAGE # TEMPLATE C-1 Y C-1 Y C-1 Y C-1 Y C-1 Y C-1 Y C-1 Y C-1 Y C-1 Y C-1 Y C-2 Y C-2 Y C-2 Y C-2 Y C-2 Y C-2 Y C-2 Y C-2 Y C-2 Y C-2 Y C-3 Y D-1 Y C-3 Y D-1 Y D-1 Y D-1 Y D-1 Y L-2 Y C-3 Y C-3 Y B-1 Y A-3 Y E-8 N E-5 Y F-1 N C-4 Y E-3 Y E-1 Y E-1 Y C-4 Y C-4 Y C-4 Y C-3 Y A-1 Y E-5 Y C-3 Y

# CUTTER 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94

DESCRIPTION 1-3/4" CHAIR RAIL D376, 2-1/4" COLONIAL CASING 2-1/4" CUSTOM CASING D327, 2-1/4" RANCH CASING 1-3/8" BACK BAND/FRAME MLDG D180 BRICK MOULDING 1" BACK BAND/FRAME MLDG 1-3/8" BACK BAND MOULDING 1-1/2" BACK BAND MOULDING 7/8" FRAME MLDG 1-1/2" PICTURE FRAME/WAINSCOAT MLDG CUSTOM BASE CAP 1-3/8" BACK BAND MOULDING ROHRERSTOWN PLATE RAIL D53 2-5/8" CROWN MLDG 3-9/16" CUSTOM CROWN MOULDING 2-7/8" COVE MOULDING 3-3/4" CUSTOM CROWN MOULDING 4" CUSTOM CASING 3-1/4" CUSTOM CASING 3-3/4" CUSTOM CASING 4" CUSTOM CASING 3-1/2" CUSTOM CASING 3" CUSTOM BASE CAP 6-5/8" 3 PC CUSTOM CROWN MOULDING 4" CUSTOM CASING 7-3/4" CUSTOM BASE (SEE CAP KNIFE #58) 4" CUSTOM CHAIR RAIL 5-1/4" CUSTOM CASING BAR RAIL 4-3/4" CUSTOM CASING (2 PIECE) 7" BEVEL TOP HANDRAIL 4-5/8" CUSTOM CROWN MOULDING AWI 2661 CROWN MOULDING D-45 5-1/4" CROWN MOULDING AWI 2361 CROWN MOULDING CUSTOM OG BASE 6" RANCH BASE 4-1/2" CUSTOM CROWN MLD'G. 6-5/8" 3 PC CUSTOM CROWN MOULDING 5" CUSTOM CROWN MLDG - CONTEMP. DESIGN 5-1/8" CUSTOM CROWN MLDG - CONTEMP. DESIGN CUSTOM BASE 3-3/4" CUSTOM CASING 5-7/8 CUSTOM BED MLD'G 4-3/8" CUSTOM CASING 5-1/2" CUSTOM CASING 4" CUSTOM CHAIR RAIL

PAGE # TEMPLATE B-2 Y C-3 Y C-3 Y C-3 Y D-1 Y C-3 Y D-1 Y D-1 Y D-1 Y D-1 Y D-1 Y A-2 Y D-1 Y E-5 Y E-1 Y E-1 Y E-5 Y E-2 Y C-5 Y C-5 Y C-5 Y C-5 Y C-5 Y A-1 Y E-3 Y C-5 Y A-2 Y B-1 Y C-4 Y F-1 Y C-9 Y G-4 Y E-1 Y E-2 Y E-1 Y E-2 Y A-1 Y A-1 Y E-2 Y E-3 Y E-4 Y E-4 Y A-1 Y C-5 Y E-4 N C-6 Y C-6 Y B-1 Y

# CUTTER 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142

DESCRIPTION 4-1/4" CUSTOM CASING 4-1/4" CUSTOM CASING 4-1/4" CUSTOM CHAIR RAIL / MULLION 4-1/4" CUSTOM CHAIR RAIL / MULLION 4" CUSTOM CROWN MLDG 6" STRAIGHT KNIFE 4-1/4" CUSTOM CASING 3-1/2" CUSTOM CASING BEADED TONGUE & GROOVE 1-5/8" CUSTOM BACK BAND 1-3/4" BASE CAP 4-5/8" CUSTOM CASING 1-1/8" CUSTOM BACK BAND - GREYSTONE 1-1/2" REED MOULDING 2-1/8" CUSTOM BASE CAP 2-3/4" CUSTOM CASING 2-5/8" CUSTOM CROWN MOULDING 1-1/4" DIA. FULL ROUND 2-7/16" BASE CAP 3-1/2" CUSTOM CHAIR RAIL 1-3/4" CUSTOM BACK BAND CUSTOM BASE MOULDING 1-1/4" CROWN MOULDING 3" CUSTOM CASING 1-3/8" JC3901 3-3/8" CUSTOM CROWN MOULDING 3" CUSTOM CHAIR RAIL 1-3/4" BASE CAP 2-1/4" CUSTOM CASING 2-5/8" RANCH CASING 2-1/16" BASE CAP CUSTOM BASE MOULDING CUSTOM CASING CUSTOM BACK BAND 1-5/8" CROWN MOULDING 2" BASE CAP OG BASE MOULDING BASE MOULDING 2-3/16" BASE BAND 1-1/2" BASE CAP 15/16" CUSTOM BACK BAND 2-1/2" CUSTOM CHAIR RAIL 1-1/8" BACK BAND 3-1/2" CUSTOM HANDRAIL 3" CUSTOM CHAIR RAIL 2-13/16" CUSTOM CHAIR RAIL C6719 BENDING RAIL MOLD C6010 BENDING RAIL MOLD

PAGE # TEMPLATE C-6 Y C-6 Y B-1 Y B-1 Y E-2 Y N C-7 Y C-9 N J-1 N D-1 Y A-2 Y C-6 Y D-2 Y L-2 Y A-1 Y C-5 Y E-1 Y G-5 Y A-2 Y B-1 Y D-2 Y A-2 Y E-1 Y C-5 Y L-2 Y E-2 Y B-1 Y A-2 Y C-5 Y C-5 Y A-2 Y A-2 Y C-5 Y D-1 Y E-1 Y A-2 Y A-3 Y A-3 Y D-2 Y A-3 Y D-2 Y B-2 N D-2 N G-1 Y B-2 Y B-2 Y G-1 Y G-1 N

# CUTTER 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190

DESCRIPTION CUSTOM CASING 1-1/4" BACK BAND 1-1/4" BACK BAND 1-3/16" BED MOULDING BULLNOSE EDGE BASE MOULDING BASE CAP CUSTOM CASING 1-3/8" BACK BAND 3" CHAIR RAIL BASE CAP CUSTOM CASING 1-1/4" BACK BAND 1-1/8" BACK BAND 1-5/8" CROWN MOULDING BASE MOULDING BASE MOULDING 3-1/2" CUSTOM CASING 1-7/16" BASE CAP CUSTOM HANDRAIL - TOP CUSTOM HANDRAIL - SIDE 1-1/8" BASE CAP 3-3/16" BED MOULDING 3-3/16" BED MOULDING 2" COVE MOULDING 1-1/4" BACK BAND 3/4" BEAD MOULDING 2-5/8" CUSTOM CASING MA 97 FJ CASING 2-3/4" CUSTOM CASING 1-1/2" CUSTOM HANDRAIL 1-1/2" COVE MOULDING JCS 1554 BASE MOULDING COFFMAN C6210 HANDRAIL 1-1/4" BACK BAND BASE MOULDING 2-7/8" CUSTOM CASING HAND RAIL (SIDE) HAND RAIL (TOP) BOTTOM RAIL (SIDE) BOTTOM RAIL (TOP) GERMAN SIDING BASE CAP CUSTOM BASE D75 1 5/8" BED MOULDING CUSTOM HANDRAIL CUSTOM HANDRAIL 1 1/2" BACK BAND

PAGE # TEMPLATE C-11 Y D-2 Y D-2 Y E-5 Y L-1 Y A-3 Y A-3 Y C-10 Y D-2 Y B-2 Y A-3 Y C-10 Y D-2 Y D-2 Y E-5 Y A-3 Y A-3 Y C-11 Y A-3 Y G-1 Y G-1 Y A-3 Y E-7 Y E-7 Y E-7 Y D-2 Y L-1 Y C-11 Y C-11 Y C-11 Y G-3 Y E-5 Y A-4 Y G-3 Y D-2 Y A-4 Y C-11 Y G-3 Y G-3 Y G-3 Y F-2 A-4 A-4 E-5 G-3 G-4 D-3

Y Y Y Y Y Y Y

# CUTTER 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238

DESCRIPTION CUSTOM CHAIR RAIL 2 3/4" CUSTOM CASING 1 3/4" HAND RAIL BEADED TONGUE & GROOVE BEADED TONGUE & GROOVE HANDRAIL (TOP) HANDRAIL (SIDE) 3 1/2" CUSTOM CASING D623 BASE 3-1/2" CUSTOM CASING 2-3/4" CUSTOM CASING D163 BASE 3-1/2" CUSTOM CASING 97M CASING 3-1/2" CUSTOM CASING 2-1/4" CUSTOM CASING 2-5/8" CUSTOM CASING 3-5/8" CUSTOM CASING 3-1/2" CUSTOM CASING 1-5/8" BACKBAND 1" BACKBAND 1-13/16" BASE CAP 1-3/8" BASE CAP 1-11/16" BACKBAND 3-1/2" CROWN MOULDING 1-1/16" PANEL MOULDING 1-3/4" BASE CAP (WM-217) 1-11/16" CROWN MOULDING 13/16" EDGE MOULDING BASE MOULDING CUSTOM CROWN MOULDING 2-1/4" EDGE BAND 1/2" TONGUE FOR #222 PANEL MOULDING 9/16" BEAD 3/8" BEAD 7/8" BEAD 5/8" BEAD 1/4" BEAD 3/8" BEAD 1-5/8" BASE CAP 2" BASE CAP 1-1/4" BACK BAND 2-5/8" CUSTOM CASING 1-3/8" BEAD 1-15/16" BASE CAP 1-1/8" PANEL MOULDING (WM183) 1/2" STOP MOULDING (WM147)

PAGE # TEMPLATE B-3 Y C-11 Y G-4 Y J-1 Y J-1 Y G-4 Y G-4 Y C-11 Y A-4 Y C-11 Y C-13 Y A-4 Y C-13 Y C-13 Y C-13 Y C-13 Y C-13 Y C-13 Y C-13 Y D-3 Y D-3 Y A-4 Y A-4 Y D-3 Y E-5 Y L-2 Y A-4 Y E-5 Y L-1 Y A-4 Y E-5 Y L-1 Y L-1 Y L-1 Y L-1 Y L-1 Y L-1 Y L-1 Y L-1 Y L-1 Y A-5 Y A-5 Y D-3 Y C-13 Y L-1 Y A-5 Y L-1 Y L-2 Y

# CUTTER 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286

DESCRIPTION 2-1/2" DIA HANDRAIL BASE MOULDING 2-3/4" BED MOULDING REEDED CASING 1-1/8" BACK BAND 2-1/2" CHAIR RAIL 11/16" COVE MOULDINGS 7/16" COVE MOULDING 1-5/8" BACK BAND MOULDING 3-5/16" CROWN MOULDING BASE MOULDING BASE CAP BASE CAP BASE MOULDING BASE CAP BACKBAND BEADED TONGUE & GROOVE 2" CHAIR RAIL MOULDING CHAIR RAIL BACKER 2-1/2" CASING (WM351) BASE MOULDING 1-5/8" CAP MOULDING 3-1/2" CASING 3-1/2" CASING 1-1/4" EDGE MOULDING 2-3/8" CASING 1-1/2" BACK BAND 1-3/4" BULLNOSE 1-3/4" EDGE MOULDING 2-3/4" CASING 3-1/2" CASING 1-7/8" BASE CAP 1-3/4" BACK BAND BASE MOULDING 1-7/16" EDGE MOULDING 1-3/4" CHAIR RAIL 3-1/8" CASING C6010 HANDRAIL 3-7/8" HANDRAIL 3" CASING 3-1/8" CROWN MOULDING PANEL MOULDING BASE MOULDING 2-5/8" CROWN MOULDING 3-5/16" HANDRAIL 2-3/8" BASE CAP 1-5/8" BACK BAND 2-1/4" CROWN MOULDING

PAGE # TEMPLATE G-5 Y A-5 Y E-9 Y C-13 Y D-3 Y B-3 Y L-2 Y L-2 Y D-3 Y E-11 Y A-5 Y A-5 Y A-5 Y A-5 Y A-5 Y D-3 Y J-1 Y B-3 Y B-3 Y C-15 Y A-5 Y L-2 Y C-15 Y C-15 Y L-2 Y C-15 Y D-3 Y L-2 Y L-2 Y C-15 Y C-15 Y A-5 Y D-3 Y A-4 Y L-2 Y B-3 Y C-15 Y G-1 Y G-4 Y C-15 Y E-13 Y L-2 Y A-6 Y E-13 Y G-5 Y A-6 Y D-3 Y E-13 Y

# CUTTER 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334

DESCRIPTION 2-3/8" CASING 2-3/4" CHAIR RAIL 1-5/8" BEAD 3" CHAIR RAIL 1-3/16" CROWN MOULDING BASE MOULDING BASE MOULDING 1-3/8" BACK BAND 3-1/2" CASING 2" CASING BASE MOULDING 1-1/16" BACK BAND BASE MOULDING BASE CAP BASE MOULDING BASE CAP BACK BAND 4-1/4" CUSTOM CASING 4-1/4" CUSTOM CASING 4-1/4" CUSTOM CASING 4-1/4" CUSTOM CASING 4-1/2" JCS 1646 CASING 5" CUSTOM CROWN MLDG 5" CUSTOM CROWN MLDG 5-1/8" CUSTOM CROWN MLDG 4-3/8" CUSTOM CASING 4-13/16" CUSTOM CASING 3-1/4" CUSTOM CASING 4-1/4" CUSTOM CASING 5" BED MOULDING 7-1/2" CUSTOM CROWN MOULDING 4" CUSTOM CASING JCS 3221 HANDRAIL 4-1/2" CUSTOM HANDRAIL 3-1/2" CUSTOM BOTTOM RAIL 6-3/8" CUSTOM CROWN MOULDING 4-3/4" CUSTOM HANDRAIL 3-13/16" CUSTOM CASING D390M CHAIR RAIL CUSTOM CASING 3-3/4" CUSTOM CASING PLINTH BLOCK 3-1/4" CUSTOM CASING 4-3/4" REEDED CASING 3-7/8" CUSTOM CHAIR RAIL JCS 1671 CASING 4" CUSTOM CASING 3 3/8" CUSTOM CHAIR RAIL

PAGE # TEMPLATE C-15 Y B-2 Y L-2 Y B-4 Y E-14 Y A-6 Y A-6 Y D-3 Y C-15 Y C-15 Y A-6 Y D-4 Y A-6 Y A-6 Y A-6 Y A-6 Y D-4 Y C-8 Y C-8 Y C-8 Y C-7 Y C-7 Y E-4 Y E-3 Y E-4 Y C-7 Y C-8 Y C-8 Y C-7 Y E-3 Y E-6 Y C-9 Y G-1 Y G-2 Y G-2 Y E-6 N G-2 N C-9 Y B-2 Y C-12 Y C-10 Y C-10 Y C-11 Y C-12 Y B-2 Y C-12 Y C-12 Y B-3 Y

# CUTTER 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382

DESCRIPTION 4 7/8" CUSTOM CHAIR RAIL 3" BASE CAP 4 7/8" REED CASING 3-9/16" CUSTOM CHAIR RAIL 5-5/16" BED MOULIDNG 3-7/8" COVE MOULDING 4-11/16" CROWN MOULDING 4" CUSTOM CASING 3" HANDRAIL 5-3/16" CUSTOM CROWN MOULDING 4-7/16" BAR RAIL 5-1/8" CUSTOM CHAIR RAIL 5-9/16" CROWN MOULDING 12-1/4" CROWN MOULDING 12-1/4" 6-7/8" CROWN MOULDING 7-3/4" CROWN MOULDING #1 7-3/4" CROWN MOULDING #2 4" CROWN MOULDING 5-5/16" CROWN MOULDING 4-1/2" CROWN MOULDING 6" COVE MOULDING 4-5/8" COVE MOULDING 5" CROWN MOULDING 3-1/2" CROWN MOULDING 4" CROWN MOULDING 4-1/4" CROWN MOULDING 5-3/16" CROWN MOULIDNG 4-5/16" CROWN MOULDING 4-11/16" CROWN MOULDING BASE MOULDING 4-3/8" CROWN MOULDING 2-3/8" HANDRAIL 4-7/8" CROWN MOULDING 5-1/2" CROWN MOULDING 4-1/4" CASIN (5010M) 4-1/4" CASING (2 PC) (5010M) 5-3/4" CROWN MOULDING 3-3/4" CROWN MOULDING 2-7/16" CROWN MOULDING 3-7/8" CASING 3-9/16" HANDRAIL 3-1/4" CASING 2-1/8" CHAIR RAIL 6" CROWN MOULDING 3" CROWN MOULDING 5" CROWN MOULDING 4-1/2" BASE MOULDING

PAGE # TEMPLATE B-3 Y A-4 Y C-10 Y B-3 Y E-7 Y E-8 Y E-8 Y C-14 Y G-5 Y E-6 Y F-1 Y B-2 Y E-6 Y E-7 Y E-7 Y E-8 Y E-9 Y E-9 Y E-8 Y E-9 Y E-9 Y E-10 Y E-10 Y E-9 Y E-9 Y E-10 Y E-10 Y E-11 Y E-11 Y E-11 Y A-5 Y E-11 Y G-4 Y E-10 Y E-11 Y C-14 Y C-14 Y E-12 Y E-12 Y E-12 Y C-14 Y G-5 Y C-14 Y B-3 Y E-12 Y E-12 Y E-12 Y A-6 Y

# CUTTER 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430

DESCRIPTION 4-3/16" CROWN MOULDING 3-3/4" CASING 5-1/16" CROWN MOULDING 4-1/2" BASE 4-3/4" CROWN MOULDING 5-1/2" CASING 6-3/4" BASE MOULDING 5-3/4" CROWN MOULDING 2-3/8" CHAIR RAIL 4" CROWN MOULDING 5-7/16" CROWN MOULDING 2" CROWN MOULDING 5-1/4" CROWN MOULDING HANDRAIL TOP HANDRAIL SIDE 8-1/2" COVE MOULDING 4-1/8" CROWN MOULDING 2" CHAIR RAIL 4-1/2" CASING 4-11/16" PLINTH BLOCK 3-15/16" COVE & MOULDING 3-5/8" CHAIR RAIL 5-5/16" CROWN MOULDING 6" CHAIR RAIL 3-5/8" CASING 4-1/2" CASING 3-7/8" CROWN MOULDING 3-5/8" CROWN MOULDING 5-3/4" CHAIR RAIL 5-1/2" CASING 3-11/16" CASING JELDWEN 6710 HANDRAIL JCS 2609 PICTURE RAIL 5-3/16" CROWN MOULIDNG 5-1/16" CROWN MOULDING 4-1/8" CROWN MOULDING 10-3/4" MANTLE MOULDING 2-3/4" HANDRAIL 1-7/8" BASE CAP 4-3/4" CASING 8-1/8" CROWN MOULDING KNIFE #1 8-1/8" CROWN MOULDING KNIFE #1 BASE MOULDING 4" CASING 3-5/8" CASING 4-1/2" CASING BASE MOULDING 3-3/4" CASING

PAGE # TEMPLATE E-12 Y C-14 Y E-12 Y A-6 Y E-8 Y C-9 Y A-1 Y E-13 Y B-3 Y E-13 Y E-13 Y E-13 Y E-14 Y G-5 Y G-5 Y E-14 Y E-14 Y B-4 Y C-12 Y C-12 Y E-14 Y B-4 Y E-14 Y B-4 Y C-14 Y C-6 Y E-8 Y E-14 Y B-4 Y C-16 Y C-16 Y G-6 Y F-2 Y E-15 Y E-15 Y E-15 Y F-2 Y G-6 Y A-7 Y C-16 Y E-16 Y E-16 Y A-8 Y C-16 Y C-16 Y C-16 Y A-8 Y C-17 Y

# CUTTER 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478

DESCRIPTION 4-7/16" CASING 4-9/16" CASING 4-3/8" CASING 4-7/16" CASING

11/16" BEAD CHAIR RAIL 1-3/4" PICTURE RAIL 3/4" BASE MOULDING 2-1/8" BASE CAP 6910S HANDRAIL / TOP 6910S HANDRAIL / SIDE 1-1/2" BASE CAP 1-5/16" BACK BAND JCS 1529 BASE MOULDING JCS 1536 BASE MOULDING 1-1/4" BASE CAP 1" BACK BAND

PAGE # TEMPLATE C-18 Y C-18 Y C-18 Y C-18 Y

L-2 B-4 F-2 A-7 A-7 G-1 G-1 A-7 D-4 A-7 A-7 A-7 D-4

Y Y Y Y Y Y Y Y Y Y Y Y Y

# CUTTER 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526

DESCRIPTION 1-5/16" BACK BAND RB3 CASING PIC-WIC SHIPLAP 2-9/16" CROWN MOULDING 3/4" BASE MOULDING 4" CASING 1-3/4" HANDRAIL 1-1/4" BASE CAP 1-1/2" BASE CAP 1" BASE CAP 11/16" BASE MOULDING 11/16" BASE MOULDING 2" BASE CAP 3-1/8" CROWN MOULDING 2-1/8" BACK BAND BASE MOULDING 3-3/8" CROWN MOULDING 3-1/2" CROWN MOULDING 1-7/8" BASE CAP 4" CASING 2-11/16" CROWN MOULDING 3-1/8" CROWN MOULDING 3-1/2" CASING 1-1/8" BACK BAND 1-1/4" BACK BAND 2-3/4" CASING 3-9/16" CASING 3/4" BASE MOULDING 3/4" BASE MOULDING 2-1/2" CASING 3-1/2" CASING 2-3/4" CASING 1-13/16" BACK BAND 2" BASE CAP 2-1/2" CHAIR RAIL 3-1/2" CHAIR RAIL

PAGE # TEMPLATE D-4 Y C-15 Y J-1 Y E-15 Y A-7 Y C-17 Y G-6 Y A-7 Y A-7 Y A-7 Y A-7 Y A-7 Y A-7 Y E-15 Y D-4 Y A-7 Y E-15 Y E-15 Y A-8 Y C-17 Y E-15 Y E-15 Y C-17 Y D-4 Y D-4 Y C-17 Y C-17 Y A-8 Y A-8 Y C-17 Y C-17 Y C-17 Y D-4 Y A-8 Y B-4 Y B-4 Y

# CUTTER 527 528 529 530 531 532 533 534 535 536 537

DESCRIPTION

PAGE # TEMPLATE

LEZZER LUMBER MOULDING & MILLWORK PROFILE GUIDE UPDATED 2020