Punched Tin - How To Clean Punched Tin Lighting Fixtures People that make or buy punched tin items aren't always sure of how to effectively clean and care for the pieces, for example shades, lamp fixtures and other types of lighting with embossed tin on them. Here’s some valuable information on how to make sure your beautiful pierced tin products last a lifetime. A Lot Like Cleaning A Cheese Grater Cleaning pierced tin lighting fixtures using a sponge, cloth, a feather duster or another kind of duster is akin to dusting a cheese grater. Leaving you annoyed and with a big mess on your hands, you will often end up catching tiny pieces and bits of whatever you are using in the tin panel's design. Fortunately, there is a much easier, more effective and environmentally friendly way to clean pierced tin lighting. Be Sure They Don't Rust One thing to remember when cleaning embossed tin lighting fixtures is to never use chemical spray cleaners on them, since these harsh solutions can cause corrosion. Then you want to make sure not to leave any parts of the item wet, after you've cleaned the fixtures. The areas in which the pattern has been punched out are usually not sealed, which is the reason for this even though the places where the tin has been coated are protected. As such, those parts could rust should they stay wet for too long. Avoid Electrical Shocks One more tip that may seem obvious to many people is before cleaning anything electrical, be sure the item has either been unplugged or turned off before you start. When first working with an electrical item, you should always think about safety. Pretending You’re Picasso One of the best ways to clean embossed tin lighting fixtures is using a 1-inch paint brush. Without needing to pick out all of those little pieces when you are finished, this method will allow you to get into the tiny nooks and crannies of the items. The brush can be used over and over again, besides it working great. When the items require a deeper cleaning because of a greasy buildup, there’s a way to take care of that, too. You simply need to be careful not to damage the finish with any chemical cleaners, once again. Instead, follow these suggestions. Mix together a solution of mild dishwashing liquid and lukewarm water, try not to get it too hot. Being careful to never use too much water, dip the paint brush into the solution, shake off any excess and dab it around the grimy areas. The brush needs to be barely damp. For dirtier spots, slowly move the brush back and forth to gently scrub the spot with the bristles.
PiercedTin.com
Page 1