Update Instructions Dear Customer, Please follow these steps to update the software of your Cen-Tech Scanner SKU 60693: 1. Download the software update package to your computer and unzip it with WinRAR. You can follow this link http://images.harborfreight.com/hftweb/softwareupdates/60693.zip or by looking for your product at www.harborfreight.com. 2. Take notes of the folder’s name/location to which you are downloading the file to. 3. Open or extract the downloaded file using WinRAR to unzip the file. WinRaR will ask you where to save the new unzipped file, and then chose a folder and take notes of the folder’s name/location. 4. Install Maxilink II on your computer. a. You can find the Maxilink II set up software included in the CD provided with the Scanner. b. Install Maxilink II and run the Maxilink Tool Kit. Maxilink II window should open. 5. Connect the Scanner to your computer with the provided USB cable. 6. On the Scanner. a. Select “Setup”, then select “Update Mode”, and then press “OK”. b. The status bar on the upper right corner of Maxilink’s window should be green. 7. Select the model of your product (SKU number) on the left side of the Malink window (see Photo).
8. After selecting the model number, click on “Select File” under the “Update Program” pane on the Maxilink II window. 9. Select the file you downloaded and unzipped. This file has a “.bin” extension. 10. Click “Update” in the Maxilink II window. Once update is complete a message will appear on the Scanner confirming that the update was successful. a. Note: Do not move the Scanner or, turn off the Scanner or computer during the update process. 11. Power off and on the Scanner to finish the update. For technical questions, please call 1-800-444-3353.