Pivot clamp block Fitting the miter fence. There are two pivot holes (one on each side of the table) to enable the miter fence to be fitted on both sides of the extension table. It can be set at 90 degrees and adjusted Fence pivot between 90 and 45 degrees. Fence pivot hole
Fence The fence can be adjusted toward or away from the blade by loosening the pivot clamp block, moving to the required position and re-clamping. To fit the fence to the table, insert the pivot pin into the selected hole. Push the fence against the table flip stop and lock in position with the clamp under the fence. If required, the table flip stop can be adjusted by loosening the lock nut, rotating the screw to the required position and locking with the locking nut. The adjustment method is 90-degree flip stop covered later.
The fence has an adjustable flip stop.
Fence flip stop
24