GABELBRÜCKEN » TRIPLE CLAMPS
X
WUSSTEST DU SCHON ÜBER DIE VORTEILE EINER CNC-GEFRÄSTEN GABELBRÜCKE BESCHEID?
DO YOU KNOW ABOUT THE BENEFITS OF A CNC-MACHINED TRIPLE CLAMP?
Alle KTM CNC-gefrästen Gabelbrücken verfügen über folgende Eigenschaften: – Gefertigt aus hochwertigstem Aluminium – Optimal abgestimmte Steifigkeit des Gabelschaftrohres – 100 %ige Fluchtung der Gabelrohre – Perfekte Flexibilität – genau der KTM WP Gabel angepasst
All KTM CNC-machined triple clamps have the following properties: – Manufactured from highest grade aluminium – Optimally tuned steering stem stiffness – 100 % alignment of the fork tubes – Perfect flexibility – adapted precisely to the KTM WP fork
Die Werksgabelbrücke hat zusätzliche Vorteile, nämlich: – Nach dem Eloxieren gespindelte Gabelklemmung: Dieser Bearbeitungsvorgang erhöht, bei gleichbleibendem Anzugsdrehmoment, die Reibung zwischen der Gabelbrücke und den Gabelrohren, was ein Verdrehen der Gabelrohre in der Gabelbrücke weitgehend verhindert – Die spezielle Aufnahme des Gabelschaftrohres unterstützt diese Eigenschaft noch zusätzlich – Supereinfache Versatzverstellung: Demontage von Vorderrad und Gabel ist nicht erforderlich!
The factory triple clamp has the additional benefits of: – Fork clamping spindled after anodising: With the same tightening torque, this operation increases the friction between triple clamp and fork tubes, thus practically preventing the fork tubes from twisting in the triple clamp – The special steering stem bracket provides additional support for this feature – Ultra-easy offset adjustment: dismantling of front wheel and fork is not necessary!
Der Gabelbrücken-Versatz ist die Distanz der horizontalen Mittellinie beider Gabelholme bis zur Mitte der Lenkachse, um die die Gabelholme gegenüber der Lenkachse versetzt sind (bezeichnet als Maß „X“). Durch die Markierung auf der Gabelbrücke ist der eingestellte Versatz auf einen Blick ersichtlich. Versatz-Einstellmöglichkeiten: – Kürzerer Versatz: Stabilität auf schnellen Geraden – Längerer Versatz: einfacheres und schnelleres Einlenken in Kurven
The triple clamp offset is the distance between the horizontal centre line of both fork tubes and the centre of the steering axis, by which the fork tubes are offset from the steering axis (referred to as dimension “X”). The selected offset can be seen at a glance thanks to the marking on the triple clamp. Offset setting options: – Shorter offset: stability on fast straights – Longer offset: simpler and swifter steering into corners
Alle KTM Gabelbrücken werden inklusive Gabelschaftrohr und mit bereits aufgepresstem Steuerkopflager ausgeliefert.
All KTM triple clamps are supplied with steering stem and with the steering head bearing already pressed on.
SXS.13.450.460 SX EXC XC-W
781.01.999.022 / 04
SXS TEILE » SXS PARTS
EXC XC-W
781.01.999.020 / 04 EXC XC-W GABELBRÜCKE TRIPLE CLAMP
22 MM OFFSET
14 – 17 17
14 – 17 17
20 MM OFFSET
NEW!!
13 – 17 14 – 17 17
WERKSGABELBRÜCKE Mit einstellbarem Versatz 20 oder 22 mm. Beim Verbau auf SX Modelle ab 2016 wird zusätzlich die Lenkeraufnahme 789.01.939.044 / 144 / 244 / 344 / 444 oder das PHDS SXS.07.125.200 benötigt. FACTORY TRIPLE CLAMP With adjustable offset of 20 or 22 mm. During installation on SX models from 2016 the handlebar support 789.01.939.044 / 144 / 244/ 344 / 444 or the PHDS SXS.07.125.200 is additionally required.
008