Blog: Krisssolutions.com.au
Safety Tips for Using Heavy Construction Equipment The construction forefront is radically evolving beyond leaps and beyonds. In the 21st century, construction projects have become a lot more elaborate and there are a number of elements associated with the intricate construction work. Nevertheless, every construction project requires various types of heavy equipment. The most common of them include earthmoving attachments that have skid steer attachments, excavator buckets, tractor attachments, and more. Unfortunately, these equipment can be dangerous if they are not used properly. Apart from damaging property and delay in work, improper use of these equipment can severely injure the workers. Hence, to avoid any such situations from arising, here are some safety tips that you can follow. Tips to follow before operation ● Safety should be your prime concern. Ensure that you are wearing the seat belts to secure yourself safely to the seat. This way, you would not fall off from your seat while operating the equipment. ● The mirrors should be sturdy and clean to offer you a clear view of the surroundings. ● Check the controls quickly before starting with your work. Ensure the control levers of the tractor attachments Australia are operating properly. ● Inspect the propel system before you start working to prevent any accidents from happening during work. ● Call the utility service of the area to know about the underground structures and lines. Tips to follow during operation During the operation you should follow the below-mentioned steps: ● Do not allow anyone to ride in the tilt bucket, cab, and any other area of the machine. Only the operator should be present to drive the equipment. ● Reduce the speed of the equipment when you are working within congested areas or on rough terrains. ● The bucket should be carried at the ground level. This would help in maintaining the machine's stability and increase its visibility. ● While moving around the equipment, ensure you are taking a flat route to avoid any unforeseen accidents. ● Steer the machine in a straight direction and move slowly and gradually when you need to turn the machine. ● When climbing any slope, move vertically instead of moving diagonally. ● While climbing a slope, the arm and the boom should be extended, and the bucket should be rolled out and carried low. That way, you can prevent the equipment from sliding down. ● The bucket should be parallel and low to the ground while climbing down a slope.
Blog: Krisssolutions.com.au Tips to follow after the operation The post-operation process is as essential as the pre-operation or operation procedure. Here are some tips that you must follow after operation: ● When shutting down the unit, park the equipment on flat ground and keep the attachment lowered to the ground. ● Switch off the auto-idle mode and run the engine without any load at half throttle for some time to cool down the turbocharger. ● Do not forget to lock the cab when you are done with your work. Wrapping Up Besides these guidelines, another important thing to keep in mind when working with earthmoving machines is that you should always use good quality equipment. The quality of the equipment is critical for a myriad of reasons. With high-quality equipment, you can ensure that there would not be any accidents or hazards due to sudden breakdown or malfunctioning of the equipment. So to keep your workplace free of any bad incidents, Kriss Solutions have the best excavator buckets for sale, 5t rippers for sale Australia, and other products that you can buy for your construction project. You can even get your custom design attachments for skid steers, tractors, and excavators with them. So, what are you waiting for? Check their website right away!