CATALOGO KRINO 2023 by krinotools

CATALOGO GENERALE 2023

LA NOSTRA STORIA OUR HISTORY

Krino S.p.A. cresce e si sviluppa nel cuore del Lecchese, luogo con un’antica tradizione nella lavorazione dei metalli. Fondata nel 1982 a Montevecchia, appartiene ad un parco industriale specializzato nella produzione di utensili da taglio per utilizzi professionali e hobbistici, affermandosi presto sul mercato. Lo sviluppo delle attività ha portato alla costruzione di un nuovo insediamento industriale a Monticello Brianza, contribuendo all’espansione della produzione delle linee di utensili, mantenendo alti standard qualitativi made in Italy nel pieno rispetto della sensibilità ambientale.

Krino S.p.A. was born and established in the heart of the Lecco area, a place with an ancient tradition in metalworking. Founded in 1982 in Montevecchia, it belongs to an industrial park specializing in the production of cutting tools for professional and hobbyist uses, soon establishing itself on the market. The development of activities led to the construction of a new industrial site in Monticello Brianza, contributing to the expansion of the production of tool lines, maintaining high quality standards made in Italy while fully respecting environmental sensitivity.

VISIONE VISION

La capacità di prevedere cosa accadrà e cosa potrebbe accadere: il nostro marchio si è reinventato negli anni, prestando particolare attenzione a richieste del mercato e dei clienti, sempre in anticipo sui tempi.

The ability to predict what will happen and what might happen: our brand has reinvented itself over the years, paying special attention to market and customer demands, always ahead of its time.

MISSIONE MISSION

Da sempre siamo attenti a fornire ai clienti tutte le informazioni di cui hanno bisogno, il valore della nostra offerta è determinato dall'accurata ricerca di prodotti che soddisfano elevati standard di eccellenza e affidabilità.

We have always been careful to provide customers with all the information they need; the value of our offerings is determined by the careful search for products that meet high standards of excellence and reliability.

VALORI VALUES

I nostri prodotti e la nostra azienda sono il riflesso delle nostre azioni e idee imprenditoriali. Costantemente orientati al miglioramento, ma fortemente legati alle nostre convinzioni, l'essenza di Krino deriva dall'integrità delle nostre azioni quotidiane. Our products and our company are a reflection of our entrepreneurial actions and ideas. Constantly striving for improvement, yet strongly attached to our beliefs, the essence of Krino comes from the integrity of our daily actions.

PRODUZIONE, AUTOMAZIONE, INNOVAZIONE, FORMAZIONE PRODUCTION, AUTOMATION, INNOVATION, TRAINING La Brianza, ha un’antichissima tradizione nella lavorazione dei metalli, nucleo di un potente sviluppo artigianale e, poi, industriale. La specializzazione è elevata, e ogni impresa ha una sua propria identità produttiva: lavorazione del metallo duro così come del superrapido, lavorazioni standard come quelle a disegno. La Krino è orgogliosa di appartenere a questo parco tecnologico e di continuare questa tradizione, indice riconosciuto della qualità made in Italy. Oltre al catalogo dei prodotti standard a norme ISO, che contempla utensili standard tradizionali per utilizzi professionali ed hobbistici, sino a utensili innovativi e tecnologicamente avanzati per le lavorazioni industriali più difficoltose. Siamo in grado di produrre a richiesta utensili speciali a disegno. L’esperienza specifica più che trentennale nella produzione degli utensili da taglio in acciaio superrapido dei nostri ingegneri e dei tecnici di laboratorio permettono un’assistenza tecnica qualificata ai nostri clienti in tutte le problematiche che nascono nell’utilizzo industriale e professionale. La formazione del nostro personale è attuata direttamente con corsi specifici, sia all’interno della nostra azienda, così come presso le nostre associazioni di categoria come Confindustria. Corsi di formazione specifici sono inoltre effettuati, all’interno del nostro sito, rivolti alla nostra clientela; l’esperienza è sempre positiva e molto gradita.

Brianza, has an ancient tradition in metalworking, the nucleus of a powerful craft and, later, industrial development. Specialization is high, and each company has its own manufacturing identity: machining of hard metal as well as super-rapid, standard machining as well as those made to drawing. Krino is proud to belong to this technological park and to continue this tradition, a recognized index of Made in Italy quality. In addition to the catalog of standard products to ISO standards, which contemplates traditional standard tools for professional and hobbyist uses, up to innovative and technologically advanced tools for the most difficult industrial machining. We are able to produce special tools according to drawings on request. More than thirty years of specific experience in the production of super-rapid steel cutting tools of our engineers and laboratory technicians allow qualified technical assistance to our customers in all problems arising in industrial and professional use. The training of our personnel is implemented directly with specific courses, both within our company, as well as at our trade associations such as Confindustria. Specific training courses are also carried out, within our site, aimed at our customers; the experience is always positive and very welcome.

CONTROLLO QUALITÀ

QUALITY CONTROL

L’attrezzato laboratorio di controllo qualità garantisce l’intera produzione dei nostri utensili. Specifici ed accurati controlli metallurgici sugli acciai di produzione europea, effettuati prima e dopo il trattamento termico, assicurano elevate prestazioni degli utensili nella sicurezza più completa. The modern and very well equipped quality laboratory, guarantees the full production of our cutting tools. Specific and precise tests made on steels, before and after heat treatment, allow high performance totally on safety.

PERSONALIZZAZIONE CUSTOMIZE

Per raggiungere l’eccellenza nel servizio alla clientela offriamo oggi la possibilità di realizzare set e valigette con contenuti specifici: il nostro parco macchine si è infatti ampliato con una fresatrice taglia spugne che consente la realizzazione di sedi dedicate per l’inserimento di utensili e accessori su esigenza del cliente. To achieve excellence in customer service we can offer you to create sets and cases with specific contents: our machine fleet has in fact been expanded with a sponge milling machine that allows the creation of dedicated seats for the insertion of tools and accessories on customer’s request.

WWW.KRINO.IT

Visita il sito www.krino.it per rimanere aggiornato su tutte le novità di prodotto e scoprire tutta la gamma presente su questo catalogo. Inoltre, sarà presente un'area riservata, dove i clienti registrati Krino potranno vedere e acquistare i prodotti che desiderano direttamente dal sito. Visit www.krino.it to keep up to date with all the latest product news and discover the entire range featured in this catalog. In addition, there will be a restricted area where registered Krino customers can view and purchase the products they want directly from the site.

Krino è presente anche sui social con tutorial, presentazioni di prodotto e tante altre idee, dimostrazione di un’azienda dinamica e al passo coi tempi che non si accontenta dei soliti standard comunicativi. Krino is also present on social media with tutorials, product presentations and many other ideas, demonstration of a dynamic company that isn’t satisfied with the usual communication standards.

@KrinoTools

CONSULTAZIONE Reference

MATERALE MATERIAL

DIMENSIONI DIMENSIONS

CODICE ARTICOLO ITEM NUMBER

DESCRIZIONE DESCRIPTION

CODICE FAMIGLIA CODE SERIE SERIE

CARATTERISTICHE FEATURES

LISTINO PREZZI PRICE LIST

APPLICAZIONI APPLICATIONS

La struttura schematica della pagina rende la consultazione del catalogo rapida ed immediata anche grazie alla fotografia del prodotto, corredata da codici specifici, dimensioni, caratteristiche, confezionamento base e norme d’impiego. L’operatore è facilitato nell’impiego degli utensili da simboli molto semplici che specificano le effettive capacità e modalità d’uso. The catalogue is easy to consult, every page has item number, features, packaging and applications to the left side. To the right side appear: size, dimensions, code and gross price. The operator is helped to the tool choice by simple icons showing the real products purpose

LEGENDA Legenda

Cu Zn Ni Ms

Metalli Metals

Acciaio Steel

Leghe leggere Light alloys

Muro Masonry

Calcestruzzo Concrete

Pietra Natural Stones

Ferro Iron

Plastica Plastic

Bronzo Bronze

Ghisa Cast Iron

Legno Wood

Pallet

Truciolato Chipboard

Multistrato Multilayer

Legno /chiodi Wood / nails

Legno vivo Green wood

Sandwich Sandwich

Pelli Leather

GFRP

Plexiglass

Tegole Tiles

Vetro Glass

Cartone Carton

Mattone Brick

Grès porcellanato Porcelain stoneware

Grès smaltato Glazed stoneware

Grès Stoneware

Marmo Marble

Granito Granite

Rame Copper

Moquette

Truciolo lungo Long chip

Truciolo corto Short chip

Olio Oil

Emulsione Lubrificant

Percussione Rotary percussion

No Percussione Rotary cut

Acqua Water

No Acqua No water

Trapano Drill

Avvitatore Screwdriver

SDS Plus

SDS Max

Magnetico Magnetic

A colonna Drill press

Migliore qualità Top quality

Su richiesta On demand

In esaurimento Running out

Piastrella standard Standard tile

Revesibile Revesible

Top Quality

INOX

Inox Stainless

Alu

Alluminio Aluminum

LAVORARE IN SICUREZZA Safety works

Notevole e costante cura è stata dedicata alla costruzione dei nostri utensili, una qualità che significa massima efficienza ed, insieme totale sicurezza per gli utilizzatori. Rendimenti elevati si ottengono solo con un corretto utilizzo dell’utensile. Per questo motivo, invitiamo ad una scelta appropriata dell’utensile, prima di intraprendere una qualsiasi operazione di taglio, avvalendosi delle informazioni specifiche contenute nel catalogo, sulle confezioni dei prodotti e della consulenza tecnica diretta dei tecnici aziendali. n corretto utilizzo significa anche e soprattutto usare sempre tutte le protezioni di sicurezza individuali richiesta dallo specifico lavoro. La vostra salute è un bene prezioso, difendetela. A special care has been dedicated during the production of our tools, quality means perfect working order and total safety for the hand users. High performance are possible only with the right use of the tools. For this reason we invite you, before starting with any kind of cutting operation to choose the right tool thanks to the information given by this catalogue or on the products packaging and, when necessary directly from our technical staff. Always use the individual safety protections required by the specific work. Your health is precious, protect it!

INDICE PER CATEGORIA Index by category

UTENSILI PER IL TAGLIO DEI METALLI METAL CUTTING TOOLS

Pagina Page

26-145 PUNTE PER IL TAGLIO DEI METALLI Metal cutting twist drills

Pagina Page

146-237 UTENSILI CONICI, FRESE E SEGHE A TAZZA PUNTE A GRADINO E SVASATORI Conical drill bits, hole cutters and hole saws subland twist drills and countersinks

Pagina Page

238-409 MASCHI E FILIERE Taps and dies

Pagina Page

410-495 ALESATORI, FRESE FRONTALI, UTENSILI SALDOBRASATI, FRESE ROTATIVE E LAME DA TAGLIO Reamers, end mills, brazed tools, rotary burrs and cutting blades

INDICE PER CATEGORIA Index by category

UTENSILI DA TAGLIO PER EDILIZIA BUILDING AND CONSTRUCTION TOOLS

496-553

Pagina Page

UTENSILI PER MATERIALI EDILI Building and contruction tools

UTENSILI PER IL TAGLIO DEL LEGNO WOODWORKING TOOLS

554-571

Pagina Page

UTENSILI PER IL TAGLIO DEL LEGNO Woodworking tools

INDICE FOTOGRAFICO Photographic index

UTENSILI PER IL TAGLIO DEI METALLI METAL CUTTING TOOLS VISIONE D'INSIEME: PUNTE PER METALLO CON CODOLO CILINDRICO Overview: straight shank twist drills for metal cutting

PUNTE ELICOIDALI - SERIE CORTA Twist drills - Short serie cod.

DIN

material

page

cod.

DIN

material

page

01089

338

01354

338 CR 13

HSS-G

103

01093

338

HM HSS

01080

338

HSS-G

106

01120

338

HSS-CO 8%

01082

338 CR 10

HSS-G

108

01122

338 CR 10

HSS-CO 8%

01084

338 CR 13

HSS-G

108

01123

338 CR 13

HSS-CO 8%

01001

338

HSS-R

110

01300

112

01305

338

HSS-CO 5%

TiAlN

01003

338 CR 10

HSS-R

338

HSS-CO 5%

TiAlN

01004

338 CR 13

HSS-R

113

HSS-R

116

HSS-R

117 118

01140

338

HSS-CO 5%

01030

01139

338

HSS-CO 5%

01034

ANSI B94 inches ANSI B94 inches

01145

338

HSS-CO 5%

01091

338

SPECIAL BRASS

01147

338 CR 10

HSS-CO 5%

01092

338

SPECIAL ALUMINIUM

119

01146

338 CR 13

HSS-CO 5%

01157

ANSI B94 inches

HSS-CO 5%

01220

338

HSS-G

01401

338

HSS-G

01320

338 - 118°

HSS-G

TiN

cod.

DIN

material

page

01160

338

HSS-G

TiN

01119

1897

01163

338 CR 10

HSS-G

TiN

01126

1897

HSS-CO 8%

01164

338 CR 13

HSS-G

TiN

01307

1897

01162

ANSI B94 inches

HSS-G

TiN

01143

1897

HSS-CO 5%

01201

338

HSS-G

01149

1897

HSS-CO 5%

01203

338 CR 10

HSS-G

01051

NORMA KRINO

HSS-CO 5%

01209

338 CR 13

HSS-G

01148

~1897

HSS-CO 5%

01060

338

HSS-G

01166

1897

TiN

01062

338 CR 10

HSS-G

01207

1897

HSS-G

01063

338 CR 13

HSS-G

01094

1897

HSS-G

01090

338

HSS-G

01095

~1897

HSS-G

01070

338

HSS-G

01067

1897

HSS-G

01072

338 CR 10

HSS-G

01076

1897

HSS-G

01074

338 CR 13

HSS-G

01050

NORMA KRINO

HSS-G

01115

ANSI B94 inches

HSS-G

01077

~1897

HSS-G

01079

338

HSS-G

01022

1897

HSS-G

01066

338 - 118°

HSS-G

01356

1897

HSS-G

104

01350

338

HSS-G

100

01087

1897

HSS-G

109

01352

338 CR 10

HSS-G

102

01018

1897

HSS-R

114

SERIE E TRA CORTA Extra short serie

TiAlN

HSS-CO 5%

HSS-G

INDICE FOTOGRAFICO Photographic index

PARABOLIC

SERIE LUNGA Long serie cod.

UTENSILI CONICI E A GRADINO Conical and step drill bits DIN

material

page

01128

340

HSS-CO 8%

01306

340

01141

340

HSS-CO 5%

01152

340

HSS-CO 5%

01168

340

TiN

01208

340

01096

cod.

DIN

material

page

01182

HSS-G

148

01176

HSS-G

149

01206

HSS-G

TiAlN

150

01200

HSS-G

TiN

150

HSS-G

01180

HSS-G

151

340

HSS-G

01215

HSS-G

151

01078

340

HSS-G

01248

HSS-G

TiAlN

152

01358

340

HSS-G

105

HSS-G

TiN

152

340

HSS-G

109

01244

01086 01020

340

HSS-R

115

01240

HSS-G

153

01241

HSS-G

153

01236

HSS-G

TiAlN

154

01230

HSS-G

TiN

155

01183

HSS-G

155

TiAlN

HSS-CO 5%

HSS-G

SERIE E TRA/SUPER LUNGA Extra/Super long serie cod.

DIN

material

page

01376

1869/1

HSS-CO 5%

01377

1869/2

HSS-CO 5%

01378

1869/3

HSS-CO 5%

01239

HSS-G

156

01370

1869/1

HSS-G

01254

HSS-G

157

01371

1869/2

HSS-G

01372

1869/3

HSS-G

01098

1869/1

HSS-G

01099

1869/2

HSS-G

01100

1869/3

HSS-G

01129

NORMA KRINO NORMA KRINO NORMA KRINO

HSS-G

01105 01114

VISIONE D'INSIEME: PUNTE GAMBO RINFORZATO E ATTACCO CONICO MORSE Overview: reinforced shank twist drills and Morse taper shank

128

TRAPANI A BASE MAGNETICA Magnetic drills cod.

page

28011

160

VISIONE D'INSIEME: FRESE E SEGHE A TAZZA Overview: Hole saws

GAMBO RINFORZATO E CONICO MORSE Reinforced shank twist drills and Morse taper shank cod. DIN material

page

01368 01366

6537K

130 131

21216

01369 01367

6537L

132 133

01213

345

HM HSS

01150

345

168

FRESE A CAROTARE Annular cutter cod.

material

page

Weldon

TCT

170

21212

Quick-in®

TCT

171

134

21218

Weldon

TCT

172

HSS-CO 5%

136

21211

Quick-in

HSS-CO 5%

173

01097

345

HSS

138

21206

Weldon

HSS-CO 5%

174

01028

341

HSS

140

1870/1

HSS

142

21207

Weldon

HSS-CO 5%

01088

175

01069

341

HSS

141

21200

Weldon

HSS-G

176

01025

345

HSS-R

144

21202

Weldon

HSS-G

177

INDICE FOTOGRAFICO Photographic index FRESE PERFORATRICI Hole saws cod.

cod.

DIN

material

page

01102

8375 - 90°

HSS-G

216

178

01117

8378 - 90°

HSS-G

217

TCT

179

01057

8378 - 90°

HSS-G

217

21043

TCT

180

01272

373 - 180°

HSS-G

217

21011

HSS-CO 5%

181

01110

333/A - 60°

HSS-G

218

01214

333/A - 60°

01374

333/A - 60°

HSS-G

218

01375

333/A - 60°

HSS-G

219

HSS-G

219

material

page

21042

TCT

21040

21325

HSS-G

TiAlN

182

21300

HSS-G

TiN

183

21001

HSS-G

SEGHE A TAZZA Bimetal hole saws cod.

material

184

page

01217

333/B 60°/120° 333/B 60°/120°

01111

333/Raggio

01216

333/Raggio

01112

HSS-G

TiN

219 220

HSS-G HSS-G

218

TiN

220

05078

TCT

187

01361

90°

221

21100

TCT

186

01363

120°

221

21105

188

01364

90°

HSS-G

221

21090

HSS-CO 8% M42

190

01365

120°

HSS-G

221

21058

HSS M3

195

01264

335/C-90°

21060

196

01263

335/C-90°

HSS M3

21061

HSS M3

200

21067

HSS M3

201

01266

335/C-90° asimmetrico 335/C-90° asimmetrico 335/C-90° asimmetrico

195

01262

335/C-90°

197

01261

335/C-90°

01260

335/C-90°

01185

335/C-90°

HSS-G

227

19003

335/C-90°

HSS-G

228

19001

335/C-90°

HSS-G

228 229

21070

01265 01267

TiAlN

222

HSS-G

223

HSS-CO 5%

224

HSS-G

224 TiAlN

HSS-CO 5%

225

HSS-CO 5%

225

TiN

226

HSS-G

21073

HSS-CO 8% M42

204

21065

HSS-CO 8% M42

205

21069

HSS-CO 8% M42

208

01193

335/C-90°

HSS-G

209

01196

335/D-90°

HSS-G

229

01192

335/C-90°

HSS-G

230

01188

90°

HSS-G

230

01197

75°

HSS-G

231

26070

PUNTE A GRADINO E SVASATORI Subland twist drills and countersinks cod.

DIN

material

page

01186

335/C-60°

HSS-G

231

01103

8376 - 180°

HSS-G

214

01187

335/C-90°

HSS-G

232

01059

8376 - 180°

HSS-G

214

01190

40°

HSS-G

01104

8377 - 180°

HSS-G

214

01169

_~ 1897

01273

373 - 180°

HSS-G

215

01171

_~ 1897

01274

373 - 180°

HSS-G

215

01179

01277

373 - 180°

HSS-CO 5%

01101 01058 18

TiAlN

215

01173

8374 - 90°

HSS-G

216

01172

8374 - 90°

HSS-G

216

HSS-G

232 TiN

HSS-CO 5%

234 234

HSS-CO 5%

TiAlN

235

TiN

235

HSS-CO 5%

235

INDICE FOTOGRAFICO Photographic index cod.

DIN

material

page

cod.

DIN

material

fil /th

01174

HSS-G

236

10251

371/C

HSS-CO 5%

262

01175

HSS-G

236

10254

376/C

HSS-CO 5%

262

237

10256

371/C-15°

HSS-CO 5%

263

10258

376/C-15°

HSS-CO 5%

263

10255

371/C-35°

HSS-CO 5%

264

10257

376/C-35°

HSS-CO 5%

264

10291

371/B

HSS-CO 5%

265

10292

371/C-35°

HSS-CO 5%

265

10340

371/C

266

10330

371/C-40°

HSS-CO 5%

266

10261

371/B

HSS-CO 5%

267

10262

376/B

HSS-CO 5%

267

10277

371/B

HSS-CO 5%

268

10278

376/B

HSS-CO 5%

268

10263

371/C

HSS-CO 5%

269

10264

376/C

HSS-CO 5%

269

10279

371/C-35°

HSS-CO 5%

270

10288

376/C-35°

HSS-CO 5%

270

10280

2174

HSS-CO 5%

271

10360

2174

271

10281

2174

272

01342 VISIONE D'INSIEME: MASCHI A MACCHINA Overview: Machine taps

240

MASCHI A MACCHINA Machine taps cod.

DIN

10400

371/B

HSS-CO 5%

TiAlN

244

10401

376/B

HSS-CO 5%

TiAlN

244

10404

371/C-35°

HSS-CO 5%

TiAlN

245

10405

376/C-35°

HSS-CO 5%

TiAlN

245

10350

371/B

HSS-CO 5%

TiN

246

10351

376/B

HSS-CO 5%

TiN

246

10354

371/C-35°

HSS-CO 5%

TiN

247

10355

376/C-35°

HSS-CO 5%

TiN

247

10362

371/B 376/B

HSS-CO 5%

TiN

248

10363

371/C-40°

HSS-CO 5%

TiN

248

HSS-CO 5%

249

HSS-CO 5%

250

material

fil /th

10516

371/B 376/B 371/C-40°376/C-40°

10504

371/B

HSS-CO 5%

251

10505

376/B

HSS-CO 5%

251

10506

371C-40°

HSS-CO 5%

252

10507

376C-40°

HSS-CO 5%

252

10500

371/B

HSS-CO 5%

253

10501

376/B

HSS-CO 5%

253

10502

371C-40°

HSS-CO 5%

254

10503

376C-40°

HSS-CO 5%

254

10510

371/A

HSS-CO 5%

255

10511

371/C-40°

HSS-CO 5%

256

10512

376/C-40°

HSS-CO 5%

256

10508

371/C

HSS-CO 5%

257

10509

376/C

HSS-CO 5%

257

10513

371/C

HSS-CO 5%

258

10514

376/C

HSS-CO 5%

258

10297

371/B

259

10298

376/B

HSS-CO 5%

VAPO

259

10299

371/C-35°

HSS-CO 5%

VAPO

260

10300

376/C-35°

HSS-CO 5%

VAPO

260

10250

371/B

HSS-CO 5%

261

10253

376/B

HSS-CO 5%

261

10515

HSS-CO 5%

VAPO

HSS-CO 5%

TiN

HSS-CO 5%

10361

2174

10310

371/B 376/B

HSS-CO 5%

273

10313

371/C-35°

HSS-CO 5%

273

HSS-CO 5%

274

HSS-CO 5%

274

HSS-CO 5%

275

HSS-CO 5%

275

HSS-CO 5%

TiN

10315

371/B 376/B 371/C-35° 376/C-35° 371/B 376/B 371/C-35° 376/C-35°

10273

357

HSS-CO 5%

276

10290

357

HSS-CO 5%

276

10259

374/B

HSS-CO 5%

277

10252

374/C

HSS-CO 5%

278

10260

374/C-35°

HSS-CO 5%

279

10286

374/B

HSS-CO 5%

280

10287

374/C-35°

HSS-CO 5%

281

10268

5156/B

HSS-CO 5%

BSP

282

10276

5156/C

HSS-CO 5%

BSP

282

10267

5156C-35°

HSS-CO 5%

BSP

283

10289

5156/C

HSS-CO 5%

BSP

283

10311 10314 10312

INDICE FOTOGRAFICO Photographic index

VISIONE D'INSIEME: MASCHI A MANO Overview: Hand taps

cod.

DIN

material

fil /th

10294

HSS-CO 5%

BSPT 284

10265

371/B

HSS-CO 5%

BSW

285

10266

376/B

HSS-CO 5%

BSW

285

10274

371C-35°

HSS-CO 5%

BSW

286

10275

376C-35°

HSS-CO 5%

BSW

286

10293

HSS-CO 5%

NPT

287

10308

HSS-CO 5%

NPS

288

10309

HSS-CO 5%

NPS

288

10306

HSS-CO 5%

NPTF 289

10307

HSS-CO 5%

NPTF 289

10301

529-2B

HSS-CO 5%

8-UN 290

10269

ANSI B1.1

HSS-CO 5%

UNC

291

10270

ANSI B1.1

HSS-CO 5%

UNC

291

10271

ANSI B1.1

HSS-CO 5%

UNC

292

10272

ANSI B1.1

HSS-CO 5%

UNC

292

10282

ANSI B1.1

HSS-CO 5%

UNF

293

10283

ANSI B1.1

HSS-CO 5%

UNF

293

10284

ANSI B1.1

HSS-CO 5%

UNF

294

10285

ANSI B1.1

HSS-CO 5%

UNF

294

10305

529

HSS-CO 5%

UNEF 295

10162

371/B

HSS-G

296

10165

376/B

HSS-G

296

10168

371/C

HSS-G

297

10171

376/C

HSS-G

297

10174

371/C-15°

HSS-G

298

10177

376/C-15°

HSS-G

298

10183

371/C-35°

HSS-G

299

10180

376/C-35°

HSS-G

299

10172

529/B

HSS-G

300

10173

529/C-35°

HSS-G

300

10230

301

HSS-G

TiN

10212

HSS-G

301

10210

HSS-G

302

10198

374/C-15°

HSS-G

302

10204

374/C-15°

HSS-G

BSP

303

10139

HSS-G

BSPT 303

10134

ANSI B2.1

HSS-G

NPT

303

MASCHI A MANO Machine taps cod.

306

DIN

10147

352

10144

352

10146

material VAPO

fil /th

308

HSS-CO 5%

308

2181

HSS-CO 5%

309

10148

5157

HSS-CO 5%

BSP

309

10155

352

TiN

311

10100

352

HSS-G

310

10100

352

HSS-G

310

10102

352

HSS-G

311

10105

2181

HSS-G

312

10105

2181

HSS-G

312

10107

2181

HSS-G

314

10115

5157

HSS-G

BSP

315

10117

5157

HSS-G

BSP

315

10139

HSS-G

BSPT 303

10112

2181

HSS-G

BSF

316

10110

352

HSS-G

BSW

317

10111

352

HSS-G

BSW

317

10134

ANSI B2.1

HSS-G

NPT

303

10120

352

HSS-G

UNC

319

10122

352

HSS-G

UNC

319

10125

2181

HSS-G

UNF

320

10127

2181

HSS-G

UNF

320

10136

40432

HSS-G

321

10612

ISO 1/4 H

HSS-G

M + MF 405

10617

HSS-G

BSP 406

10616

HSS-G

BSF

10615

HSS-G

BSW 406

10613

HSS-G

UNC 406

10614

HSS-G

UNF 406

10620

HSS-G

M + MF 405

10001

4535

322

10001

4535

322

10030

357

323

10003

4535

10003

4535

324

10015

338

BSP

326

10017

6125

BSPT 326

10012

2709

BSF

326

10010

2709

BSW

327

HSS-CO 5%

HSS-G

406

M + MF 324

INDICE FOTOGRAFICO Photographic index cod.

DIN

material

fil /th

10032

ANSI B2.1

NPT

327

10020

ANSI B1.1

UNC

328

10025

ANSI B1.1

UNF

329

VISIONE D'INSIEME: FILIERE Overview: round dies

FILIERE Round dies cod.

332

DIN

material

fil /th

12144

223

HSS-CO 5%

334

12146

223

HSS-CO 5%

334

12148

5158

HSS-CO 5%

BSP

335

12165

223

TiN

336

12060

223

HSS-G

337

12062

223

HSS-G

338

12067

339

12066

HSS-G

339

12094

382

HSS-G

340

12165

223

HSS-G

336

12065

223

342

12072

HSS-G

TiN

cod.

DIN

material

fil /th

12001

223

356

12005

223

357

12015

223

BSP

358

12017

223

BSPT 358

12012

223

BSF

359

12010

223

BSW

359

12032

223

NPT

360

12020

223

UNC

360

12025

223

UNF

361

cod.

DIN

page

15001 15003

1814

364

15010 15011

365

15005 15006

366

225

368 369 371

223

HSS-G

344

15037 15032 15035 15030

12066

HSS-G

339

10065

12069

223

HSS-G

346

382

HSS-G

347

SET

HSS-G

12096

373

12075

5158

HSS-G

BSP

348

12077

5158

HSS-G

BSP

348

SET

152

12098

382

HSS-G

BSP

349

12089

352

HSS-G

BSPT 350

12087

223

HSS-G

BSF

350

12070

223

HSS-G

BSW

351

12088

223

HSS-G

BSW

351

12091

HSS-G

NPT

352

12080

223

HSS-G

UNC

352

12082

223

HSS-G

UNC

353

12085

223

HSS-G

UNF

353

12086

223

HSS-G

UNF

354

12079

223

HSS-G

UNEF 354

12093

40434

HSS-G

TiN

10600 10605 10631 10606 10625

10612 10620 10613 10615 10614 10616 10617 10618

395 396 397 401 402

HSS-G

405 407

355

INDICE FOTOGRAFICO Photographic index

ALESATORI FRESE E UTENSILI SALDOBRASATI Reamers, mills and brazed tools cod.

cod.

DIN

page

29020 29021

212/2B 212/2C

HSS-CO 5%

412 413

29026

208/B

HSS-CO 5%

414

29039

311

HSS-G

414

29040

219B

HSS-G

415

29001

206B

HSS-G

416

29006 29005

859/B -

HSS-G

29010

HSS-G

cod. 24150 24152 24151 24153 24161 24163 24162 24164 24181 24184

TiAlN

24029

HSS-CO 5%

439

417

24030

HSS-CO 5%

439

418

26100

HSS-G

439

page

28200 28202 28204 28206 28208 28210 28212

419

424 425

26001 26003

TiAlN

426 427

LAME DA TAGLIO Cutting blades

428

24180 24156

Alu

429

24017 24019 24018 24020

28214 28216 28218 28220 28224 28226

TiAlN

24013 24015 24014 24016

Alu

TiAlN

HSS-CO 8% HSS-CO 8%

TiAlN

437

438

422 423

TiAlN

436

HSS-CO 5%

Alu

24009 24011 24010 24012

HSS-CO 8% HSS-CO 8%

TiAlN

24025 24026

24154 24155

24157 24159 24158 24160 24179 24001 24003 24002 24004

24005 24007 24006 24008

26015 26033 26016 26027 26025

24177 24185 24178 24186 24176

HSS-CO 8% HSS-CO 8%

26150 26152 26154

TiAlN

24169 24171 24170 24172 24174 24175

24021 24023 24022 24024

420 421

HM HM

24165 24167 24166 24168 24183 24182

page

430 431

432

440 444

HSS-CO 10%

26020 26034

TiAlN

26028 26026

445

448 459

460

HSS-G

cod.

DIN

page

27001 27002 27003

~UNI 4012

HSS-G

27011 27012 27013

~UNI 4012

HSS-CO 5%

27050 27055

465

27060 27070

466 467

VAPO

464

HM HSS-CO 8% HSS-CO 8%

TiAlN

HSS-CO 8% HSS-CO 8%

TiAlN

HSS-CO 8% HSS-CO 8%

TiAlN

433

434

26125

468

HSS-CO 5%

25018

ASP

469

25011

BIM M42

470

BIM M42

471

BIM M42

472

25016 435

HSS-CO 8%

25010

Dente rinforzato

INDICE FOTOGRAFICO Photographic index cod.

page

cod.

DIN

page

03080 03082

Serie corta L = 250

516

03089

Serie corta

517

03140

Serie corta

VETRO E CERAMICA 517

VISIONE D'INSIEME: PUNTE PER MURO CON ATTACCO SDS Overview: Masonry drills with SDS shank

518

23620 23600 23610 23630

Attacco BOSCH®

475 476 477 478

23710 23720 23700

Attacco BLACK&DECKER®

479 479 480

23810 23815 23800 23820

Attacco universale SABRE®

482 483 484 485

PUNTE PER MURO CON ATTACCO SDS Masonry drills with SDS shank

23001

486

23010

487

cod.

page

23005

487

03169

SDS- PLUS

520

23405 23410 23415 23400

489 490 491 492

03167

SDS- PLUS

522

03152

SDS- PLUS

525

03156

SDS- PLUS

03160

SDS- PLUS

03155

Starlock®

23505 23510 23515 23500 23529

Quick Change Universal

493 494 495

UTENSILI DA TAGLIO PER EDILIZIA BUILDING AND CONSTRUCTION TOOLS

8 K4 SUPERPRO

528

SDS- PLUS

STANDARD

530

03171

SDS-MAX

GRANDI DIAMETRI DA 45 A 80 mm

532

03170

SDS-MAX

SUPER PRO

533

03172

SDS-PLUS SDS-MAX

DUST FREE

534

cod. VISIONE D'INSIEME: PUNTE PER MURO CON CODOLO CILINDRICO Overview: Masonry drills with Straight shank

page

498

PUNTE PER MURO CON CODOLO CILINDRICO Masonry drills with Straight shank cod. L

21120

Conico 1:8

536

21122

Filetto con molla With spring

537

21110 21111

M16 M22

538

21015

MD Carbide tip

540

MD Carbide grit

188

page

03043

Serie corta

03042

Serie corta

503

03110 03112

Serie corta L = 150 ÷ 250

504

03100

Serie corta

505

03072

Serie corta

03069

Serie corta L = 150 ÷ 250 L = 300 ÷ 400

SDD UNIVERSALE

507

21105

03060 03063 03065 03067

Serie corta L = 150 ÷ 200 L = 400 L = 600

SUPERIOR

508

21108

03059

Serie corta

SUPERIOR

509

03052 03053 03054 03051 03001 03005 03009 03011 03015

Serie corta L = 150 ÷ 200 L = 400 L = 600

STANDARD PLUS

510

03076

Serie corta

514

03077

Serie corta

515

Serie corta L = 200 L = 300 L = 400 L = 600

526

GRESMASTER

MAX4

STANDARD

501

506

189

21106

M14

542

03122

Keramaster Plus

543

03117

Keramaster

544

512 513

INDICE FOTOGRAFICO Photographic index cod.

page

21104

Keramaster

544

03125

546

03121

547

03405 03400 03410 03515

548

03221 03220 03222

SDS-PLUS

QUALITÀ PREMIUM ALTA QUALITÀ 550 QUALITÀ STANDARD

03210 03212

SDS-MAX

cod.

DIN

Material

page

05063

567

05058 05060

568

05077

568

05076

569

05440

569

05072 05070

569

05080

570

05400 05430

571

ALTA QUALITÀ QUALITÀ STANDARD 552

ACCESSORI ACCESSORIES cod.

UTENSILI PER TAGLIO DEL LEGNO WOODWORKING TOOLS cod.

Material

page

556

05200

Serie corta

HSS

556

05210 05212

L = 245 L = 400

557

05001 05020 05025

Serie corta L = 245 L = 400

558 559

05009

HEX 1/4"

559

05035 05036 05040 05042 05044

L = 155 L =235 L = 300 L = 460 L = 600

05037 05038

L = 235 L = 460

561

562 563

564 565

05046

564

05050

565

05065

566

05067

566

05054

SDS-PLUS

05030 05033

L = 400 L = 600

05045 05048

L = 150÷160 L = 400

560

page

28031 28051 28007 28009 28053 28055 28054 28058

Mandrini autoserranti per elettroutensili

574 575

28004 28007 28009 28001 28002 28003

Mandrini a cremagliera

576 577

28035 28034 28032 28030

Mandrini per trapani a colonna

578 579

28186 03184 20010

Raccordi di adattamento per mandrini

580

28160 28165

Attacchi conici Morse per mandrini

581

28150 28154

Bussole di riduzione per coni Morse

582

28158

Estrattori per utensili con cono Morse

583

41004 28020

Pasta lubrificante Olio da taglio

583

PUNTE PER TAGLIO DEI METALLI TWIST DRILLS FOR METAL CUTTING

VISIONE D'INSIEME: PUNTE PER METALLO CON CODOLO CILINDRICO

OTTONE

BRASS

ALLUMINIO E LEGHE

1400

HM HSS

115°

27°

1400

Co8% AISI M42

130°

27°

1400

TiAlN

130°

27°

1300

TiAlN

130°

35°

1300

130°

35°

1200

130°

36°

1200

130°

27°

1200

130°/90°

27°

900

Step Geometry

27°

900

TiN

118°

27°

900

TiN

130°

27°

900

130°

27°

850

130°

27°

800

130°

27°

800

118°

27°

800

130°

27°

700

130°

27°

650

118°

27°

650

118°

20°

135°

35°

Co5% AISI M35

HSS-G AISI M2

STEEL

IMAGE

COATING

R≤N/mm²

STEEL

ALUMINUM AND ALLOYS

INOX

<700 N/mm

TITANIUM AND SUPERALLOY

ACCIAO

TITANIO E SUPERLEGHE

<900 N/mm

ELICA

ACCIAO

SHARPENING

27°

<1400 N/mm

AFFILATURA

120°

ACCIAO

RIVESTIMENTO

IMMAGINE

MATERIAL

HELIX ANGLE

MATERIALE

STAINLESS STEEL

Overview: straight shank twist drills for metal cutting

HSS-G

HSS-R

SPECIAL

Perfect for BRASS

Perfect for ALUMINIUM

650

COD.

01089

01119

p.30

p.31

ANSI B94

INCH SERIE REDUCED SHANK

SERIE IN POLLICI CODOLO RIDOTTO 1/2"

ANSI B94

INCH SERIE

SERIE IN POLLICI

DIN 338

ATTACCO ESAGONALE

ATTACCO ESAGONALE 1/4"

SUPER LONG SERIE

SERIE SUPER LUNGA

DIN 1869

EXTRA LONG SERIE

SERIE EXTRA LUNGA

DIN 340

LONG SERIE

SERIE LUNGA

DIN 1897

DOUBLE ENDED

ELICA CONTRAPPOSTA

SUPER SHORT SERIES

SERIE SUPER CORTA

SERIE EXTRA CORTA

EXTRA SHORT SERIE

DIN 1897

DIN 338

REDUCED SHANK

CODOLO RIDOTTO 13mm

DIN 338

REDUCED SHANK

CODOLO RIDOTTO 10mm

DIN 338

SHORT SERIE

SERIE CORTA

COD.

01093 p.32

COD.

01120

01122

01123

01126

01128

p.34

p.36

p.37

01305

01307

01306

p.39

p.40

p.41

01140

01143

01141

p.42

p.43

p.44

01300 p.38

COD.

01376 - 01377 01378 p.45-46

01139 p.47

COD.

01145

01147

01146

01149

01051

01148

01152

01157

p.48

p.50

p.51

p.52

p.53

p.54

p.55

01160

01163

01164

01166

01168

01162

p.62

p.64

p.65

p.66

p.67

01201

01203

01209

01207

01208

p.68

p.70

p.71

01060 01090 sx p.72-76

01062

01063

p.74

p.75

01094 01067 sx p.77 - 78

01070

01072

01074

01076

p.86

p.88

p.89

p.90

01220 p.57

COD.

01401 p.59

COD.

01320 p.61

COD.

01066

01022

p.96

p.98

01098 - 01099 01129 01100 01105 - 01114 p.81 - 82 p.83 - 85

01095

01096

p.79

p.80

01050

01077

01078

01079 - 10211

01115

p.91

p.92

p.93

p.94

p.95

01350

01352

01354

01356

01358

p.100

p.102

p.103

p.104

p.105

01080

01082

01084

01087

01086

p.106

p.108

p.109

01001

01003

01004

01018

01020

01030

01034

p.110

p.112

p.113

p.114

p.115

p.116

p.117

01091 p.118

COD.

01092 p.119

PUNTE ELICOIDALI CILINDRICHE IN METALLO DURO INTEGRALE PER CENTRI DI LAVORO CNC Tungsten carbide drill bits for CNC

01089 120°

DIN 338

VHM

W 27°

Carbide Confezione Packaging

≤5d

3÷5 Ø

R ≤ 1400 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Plastica Plastic

Emulsione Lubrificant

Taglio di ghisa, acciai duri al manganese, bronzi e metalli abrasivi, plastiche rinforzate con fibre. Suitable for cutting into cast iron.

METALLO DURO Ø h7

L pcs.

1 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2 2,1 2,2 2,3 2,4 2,5 2,6 2,7 2,8 2,9 3 3,1 3,2 3,3 3,4 3,5 3,6 3,7 3,8 3,9 4 4,1 4,2 4,3 4,4 4,5 4,6 4,7 4,8 4,9 5 5,1 5,2 5,3 5,4 5,5 5,6 5,7 5,8

12 14 16 16 18 18 20 20 22 22 24 24 27 27 30 30 30 33 33 33 33 36 36 36 39 39 39 39 43 43 43 43 43 47 47 47 47 47 52 52 52 52 52 52 57 57 57 57 57

34 36 38 38 40 40 43 43 46 46 49 49 53 53 57 57 57 61 61 61 61 65 65 65 70 70 70 70 75 75 75 75 75 80 80 80 80 80 86 86 86 86 86 86 93 93 93 93 93

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Serie corta Short serie

€

cod.

cad/each

010890100 010890110 010890120 010890130 010890140 010890150 010890160 010890170 010890180 010890190 010890200 010890210 010890220 010890230 010890240 010890250 010890260 010890270 010890280 010890290 010890300 010890310 010890320 010890330 010890340 010890350 010890360 010890370 010890380 010890390 010890400 010890410 010890420 010890430 010890440 010890450 010890460 010890470 010890480 010890490 010890500 010890510 010890520 010890530 010890540 010890550 010890560 010890570 010890580

8,477 9,824 10,251 9,968 9,901 9,397 9,540 10,393 10,471 10,612 14,096 15,168 16,232 16,023 17,874 18,302 19,014 21,500 20,930 20,930 20,787 23,634 22,857 22,857 25,278 25,059 26,909 27,129 29,122 29,613 30,120 30,547 30,469 34,313 34,390 35,452 35,670 36,591 41,716 42,790 41,433 47,500 45,351 45,781 51,114 49,765 51,541 54,956 53,249

Ø h7

pcs.

cod.

cad/each

€

5,9 6 6,1 6,2 6,3 6,4 6,5 6,6 6,7 6,8 6,9 7 7,1 7,2 7,3 7,4 7,5 7,6 7,7 7,8 7,9 8 8,1 8,2 8,3 8,4 8,5 8,6 8,7 8,8 8,9 9 9,1 9,2 9,3 9,4 9,5 9,6 9,7 9,8 9,9 10 10,2 10,5 10,8 11 11,5 12

57 57 63 63 63 63 63 63 63 69 69 69 69 69 69 69 69 75 75 75 75 75 75 75 75 75 75 81 81 81 81 81 81 81 81 81 81 87 87 87 87 87 87 87 94 94 94 101

93 93 101 101 101 101 101 101 101 109 109 109 109 109 109 109 109 117 117 117 117 117 117 117 117 117 117 125 125 125 125 125 125 125 125 125 125 133 133 133 133 133 133 133 142 142 142 151

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

010890590 010890600 010890610 010890620 010890630 010890640 010890650 010890660 010890670 010890680 010890690 010890700 010890710 010890720 010890730 010890740 010890750 010890760 010890770 010890780 010890790 010890800 010890810 010890820 010890830 010890840 010890850 010890860 010890870 010890880 010890890 010890900 010890910 010890920 010890930 010890940 010890950 010890960 010890970 010890980 010890990 010891000 010891020 010891050 010891080 010891100 010891150 010891200

54,606 52,396 63,150 62,865 63,499 67,913 66,348 67,772 68,845 76,249 87,774 76,391 78,733 87,563 88,779 86,784 85,569 98,602 99,313 96,390 97,670 94,757 110,912 109,850 110,705 110,845 107,430 140,674 129,071 128,216 130,986 124,942 132,269 143,374 142,169 144,086 139,180 155,477 154,622 150,777 154,051 147,646 174,413 172,703 205,598 200,544 220,258 248,241

Caratteristiche del metallo duro Features of hard metal Il metallo duro è un prodotto sinterizzato costituito principalmente da WC e Co in proporzioni variabili. Da questa proporzione dipendono le caratteristiche specifiche dell’utensile: la qualità a grana fine K20 che usiamo per i nostri prodotti è composta dal 94% di WC e dal restante 6% di Co e presenta una resistenza a rottura di 2200 MPa e una durezza di 91.9 HVA. Tale prodotto è caratterizzato da un’ottima resistenza a usura e da una discreta resistenza a flessione anche se, naturalmente, si consiglia di evitare qualsiasi urto o eccessivo sforzo flettente. Vista l’elevata durezza, l’utensile è infatti discretamente fragile e sensibile a condizioni di lavoro non omogenee. Si consideri poi che il metallo duro è mediamente rigido il doppio rispetto all’acciaio superrapido: pertanto, con punte in metallo duro, si producono di norma fori molto più cilindrici. The hard metal is produced by sintering of WC and Co powders. The main features of the product depend on the content of these 2 components: we chose K20 fine grain type, which means 94% WC and 6% Co, with 2200 MPa resistance and 91.9 HVA hardness. This product has an excellent wear resistance and a good bending resistance. By the way, it’s recommended to avoid any accidental crash, because the product is very hard and thus fragile. The hard metal stiffness is quite double comparing to the high speed steel one: you can drill “very cylindrical” holes with an hard metal tool.

PUNTE ELICOIDALI CILINDRICHE IN METALLO DURO INTEGRALE PER CENTRI DI LAVORO CNC Tungsten carbide drill bits for CNC

01119 120°

VHM

W 27°

≤3d

≤3 Ø

R ≤ 1400 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Plastica Plastic

Emulsione Lubrificant

Taglio di ghisa, acciai duri al manganese, bronzi e metalli abrasivi, plastiche rinforzate con fibre. Suitable for cutting into cast iron.

Serie extra corta

DIN 1897/6539 METALLO DURO Carbide

Confezione Packaging

Extra short serie

Ø h7

pcs.

cod.

cad/each

€

Ø h7

pcs.

cod.

cad/each

€

0,5 0,6 0,7 0,8 0,9 1 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2 2,1 2,2 2,3 2,4 2,5 2,6 2,7 2,8 2,9 3 3,1 3,2 3,3 3,4 3,5 3,6 3,7 3,8 3,9 4 4,1 4,2 4,3 4,4 4,5 4,6 4,7 4,8 4,9 5 5,1 5,2 5,3 5,4 5,5 5,6 5,7 5,8 5,9

6 6 6 6 6 6 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 14 16 16 16 16 18 18 18 20 20 20 20 22 22 22 22 22 24 24 24 24 24 26 26 26 26 26 26 28 28 28 28 28 28

26 26 26 26 26 26 28 30 30 32 32 34 34 36 36 38 38 40 40 43 43 43 46 46 46 46 49 49 49 52 52 52 52 55 55 55 55 55 58 58 58 58 58 62 62 62 62 62 62 66 66 66 66 66 66

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

011190050 011190060 011190070 011190080 011190090 011190100 011190110 011190120 011190130 011190140 011190150 011190160 011190170 011190180 011190190 011190200 011190210 011190220 011190230 011190240 011190250 011190260 011190270 011190280 011190290 011190300 011190310 011190320 011190330 011190340 011190350 011190360 011190370 011190380 011190390 011190400 011190410 011190420 011190430 011190440 011190450 011190460 011190470 011190480 011190490 011190500 011190510 011190520 011190530 011190540 011190550 011190560 011190570 011190580 011190590

12,153 11,221 10,313 9,276 8,888 6,164 7,391 7,201 7,072 7,003 7,709 7,475 7,003 7,261 7,261 10,762 11,541 12,318 12,258 13,226 13,556 14,003 15,819 15,241 15,370 15,241 17,316 16,927 17,185 18,153 17,894 19,579 19,450 20,877 21,006 21,336 21,913 21,524 23,280 23,280 23,928 24,706 24,767 28,395 28,984 27,878 31,853 30,542 30,929 34,491 33,134 34,171 35,468 35,468 35,729

6 6,1 6,2 6,3 6,4 6,5 6,6 6,7 6,8 6,9 7 7,1 7,2 7,3 7,4 7,5 7,6 7,7 7,8 7,9 8 8,1 8,2 8,3 8,4 8,5 8,6 8,7 8,8 8,9 9 9,1 9,2 9,3 9,4 9,5 9,6 9,7 9,8 9,9 10 10,2 10,5 10,8 11 11,5 12 12,5 13 13,5 14 14,5 15 15,5 16

28 31 31 31 31 31 31 31 34 34 34 34 34 34 34 34 36 36 36 36 36 36 36 36 36 36 40 40 40 40 40 40 40 40 40 40 43 43 43 43 43 43 43 47 47 47 51 51 51 54 54 56 56 58 58

66 70 70 70 70 70 70 70 74 74 74 74 74 74 74 74 79 79 79 79 79 79 79 79 79 79 84 84 84 84 84 84 84 84 84 84 89 89 89 89 89 89 89 95 95 95 102 102 102 107 107 111 111 115 115

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

011190600 011190610 011190620 011190630 011190640 011190650 011190660 011190670 011190680 011190690 011190700 011190710 011190720 011190730 011190740 011190750 011190760 011190770 011190780 011190790 011190800 011190810 011190820 011190830 011190840 011190850 011190860 011190870 011190880 011190890 011190900 011190910 011190920 011190930 011190940 011190950 011190960 011190970 011190980 011190990 011191000 011191020 011191050 011191080 011191100 011191150 011191200 011191250 011191300 011191350 011191400 011191450 011191500 011191550 011191600

34,622 41,303 41,752 41,951 44,285 43,438 44,604 45,453 49,403 56,307 48,955 51,417 56,923 57,641 56,794 55,696 60,944 61,202 60,164 61,272 58,610 61,011 63,866 64,963 65,222 62,888 83,062 78,707 77,869 79,036 75,924 78,707 87,264 87,395 88,761 85,579 93,748 94,077 92,711 95,173 90,188 103,155 103,283 107,492 117,676 140,816 155,988 159,558 175,119 257,551 201,181 296,922 217,260 400,183 269,903

PUNTE ELICOIDALI CON PLACCHETTA IN METALLO DURO K20 PER IL TAGLIO DEI METALLI Carbide tipped twist drills for metal cutting

01093 115°

HM HSS

W 27°

HM/K20 HSS

<5 d

R ≤ 1400 N/mm2

Applicazioni Applications

INOX

Serie corta

DIN 338 RETTIFICATA

Short serie

Ground from the solid

Confezione Packaging

€

pcs.

cod.

cad/each

2 2,5 3 3,5 4 4,5 5 5,5 6 6,5 7 7,5 8 8,5 9 9,5 10 10,5 11 11,5 12 12,5 13

24 30 33 39 43 47 52 57 57 63 69 69 75 75 81 81 87 87 94 94 101 101 101

49 57 61 70 75 80 86 93 93 101 109 109 117 117 125 125 133 133 142 142 151 151 151

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

010930200 010930250 010930300 010930350 010930400 010930450 010930500 010930550 010930600 010930650 010930700 010930750 010930800 010930850 010930900 010930950 010931000 010931050 010931100 010931150 010931200 010931250 010931300

30,598 30,598 30,598 30,598 17,000 17,721 18,785 19,495 20,204 22,320 22,674 24,083 26,221 30,111 30,111 32,238 34,710 37,558 40,396 43,920 47,457 51,001 55,247

Inox Stainless

Acciaio Steel

Olio Oil

Acciaio al manganese Manganese steel

Taglio degli acciai duri trattati ed abrasivi con R da 750 N/mm2 a 1400 N/mm2, acciai per molle, acciai al manganese, molibdeno puro, ghisa in conchiglia con HB>300, bronzo duro. For drilling in: Hardened steel, tough cast iron, manganese steel, bronze, abrasive tough steel.

HM/K20

115°

HSS

W 27°

PUNTE ELICOIDALI AL COBALTO 8%, ESECUZIONE INTERAMENTE RETTIFICATA, SERIE CORTA Cobalt twist drills ground from the solid

01120 130°

HSS-CO 8%

W 27°

Confezione Packaging

HV 850÷920 AISI M42 SPLIT POINT DIN 1412 C (Ø≥3 mm)

<5 d

R ≤ 1400 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

Art. 01121 Self Disponibile su richiesta On demand

L’alta percentuale di Cobalto (e Molibdeno) rende questa punta particolarmente resistente alle sollecitazioni meccaniche e termiche e, pertanto, è adatta alle lavorazioni dell’acciaio inox e degli acciai resistenti al calore, di tutti gli acciai alto legati e delle leghe molto tenaci (Acciai al Ni Cr, hastelloy, nimonic, inconel). High performances in cutting stainless steel, alloy steel up to R ≤ 1400 N/mm2.

DIN 338 RETTIFICATA

Serie corta

Ground from the solid

Short serie

Ø h8

pcs.

cod.

cad/each

€

0,3 0,35 0,4 0,45 0,5 0,55 0,6 0,65 0,7 0,75 0,8 0,85 0,9 0,95 1 1,1 1,2 1,25 1,3 1,4 1,5 1,6 1,7 1,75 1,8 1,9 2 2,1 2,2 2,25 2,3 2,4 2,5 2,6 2,7 2,75 2,8 2,9 3 3,1 3,2 3,25 3,3 3,4 3,5 3,6 3,7 3,75 3,8 3,9 4 4,1 4,2 4,25 4,3 4,4 4,5 4,6 4,7 4,75 4,8 4,9 5

3 4 5 5 6 7 7 8 9 9 10 10 11 11 12 14 16 16 16 18 18 20 20 22 22 22 24 24 27 27 27 30 30 30 33 33 33 33 33 36 36 36 36 39 39 39 39 39 43 43 43 43 43 43 47 47 47 47 47 47 52 52 52

19 19 20 20 22 24 24 26 28 28 30 30 32 32 34 36 38 38 38 40 40 43 43 46 46 46 49 49 53 53 53 57 57 57 61 61 61 61 61 65 65 65 65 70 70 70 70 70 75 75 75 75 75 75 80 80 80 80 80 80 86 86 86

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

011200030 011200035 011200040 011200045 011200050 011200055 011200060 011200065 011200070 011200075 011200080 011200085 011200090 011200095 011200100 011200110 011200120 011200125 011200130 011200140 011200150 011200160 011200170 011200175 011200180 011200190 011200200 011200210 011200220 011200225 011200230 011200240 011200250 011200260 011200270 011200275 011200280 011200290 011200300 011200310 011200320 011200325 011200330 011200340 011200350 011200360 011200370 011200375 011200380 011200390 011200400 011200410 011200420 011200425 011200430 011200440 011200450 011200460 011200470 011200475 011200480 011200490 011200500

6,776 6,776 6,776 6,776 5,202 5,202 5,202 5,202 5,202 5,202 5,202 5,202 5,202 5,202 2,546 2,807 2,807 2,807 2,807 2,807 2,546 2,807 2,807 2,807 2,807 2,807 2,546 2,958 2,958 2,958 2,958 2,958 2,698 2,958 2,958 2,958 2,958 2,958 2,698 3,764 3,764 3,764 3,764 3,764 3,425 4,135 4,135 4,135 4,135 4,135 3,764 4,736 4,736 4,736 4,736 4,736 4,312 5,038 5,038 5,038 5,038 5,038 4,572

Serie corta Short serie

Ø h8

pcs.

cod.

5,1 5,2 5,25 5,3 5,4 5,5 5,6 5,7 5,75 5,8 5,9 6 6,1 6,2 6,25 6,3 6,4 6,5 6,6 6,7 6,75 6,8 6,9 7 7,1 7,2 7,25 7,3 7,4 7,5 7,6 7,7 7,75 7,8 7,9 8 8,1 8,2 8,25 8,3 8,4 8,5 8,6 8,7 8,75 8,8 8,9 9 9,1 9,2 9,25 9,3 9,4 9,5 9,6 9,7 9,75 9,8 9,9 10 10,1 10,2 10,25

52 52 52 52 57 57 57 57 57 57 57 57 63 63 63 63 63 63 63 63 69 69 69 69 69 69 69 69 69 69 75 75 75 75 75 75 75 75 75 75 75 75 81 81 81 81 81 81 81 81 81 81 81 81 87 87 87 87 87 87 87 87 87

86 86 86 86 93 93 93 93 93 93 93 93 101 101 101 101 101 101 101 101 109 109 109 109 109 109 109 109 109 109 117 117 117 117 117 117 117 117 117 117 117 117 125 125 125 125 125 125 125 125 125 125 125 125 133 133 133 133 133 133 133 133 133

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

011200510 011200520 011200525 011200530 011200540 011200550 011200560 011200570 011200575 011200580 011200590 011200600 011200610 011200620 011200625 011200630 011200640 011200650 011200660 011200670 011200675 011200680 011200690 011200700 011200710 011200720 011200725 011200730 011200740 011200750 011200760 011200770 011200775 011200780 011200790 011200800 011200810 011200820 011200825 011200830 011200840 011200850 011200860 011200870 011200875 011200880 011200890 011200900 011200910 011200920 011200925 011200930 011200940 011200950 011200960 011200970 011200975 011200980 011200990 011201000 011201010 011201020 011201025

€ cad/each

6,817 6,817 6,817 6,817 6,817 6,188 7,106 7,106 7,106 7,106 7,106 6,461 9,007 9,007 9,007 9,007 9,007 8,558 10,568 10,568 10,568 10,568 10,568 9,857 12,869 12,869 12,869 12,869 12,869 10,951 13,963 13,963 13,963 13,963 13,963 12,732 15,334 15,334 15,334 15,334 15,334 14,102 17,935 17,935 17,935 17,935 17,935 16,975 20,877 20,877 20,877 20,877 20,877 18,070 21,834 21,834 21,834 21,834 21,834 21,000 25,573 25,573 25,573

Ø h8

pcs.

cod.

10,3 10,4 10,5 10,6 10,7 10,75 10,8 10,9 11 11,1 11,2 11,25 11,3 11,4 11,5 11,6 11,7 11,75 11,8 11,9 12 12,1 12,2 12,25 12,3 12,4 12,5 12,6 12,7 12,75 12,8 12,9 13 13,25 13,5 13,75 14 14,25 14,5 14,75 15 15,25 15,5 15,75 16 16,5 17 17,5 18 18,5 19 19,5 20

87 87 87 87 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 101 101 101 101 101 101 101 101 101 101 101 101 101 101 108 108 108 108 114 114 114 114 120 120 120 120 125 125 130 130 135 135 140 140

133 133 133 133 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 151 151 151 151 151 151 151 151 151 151 151 151 151 151 160 160 160 160 169 169 169 169 178 178 178 178 184 184 191 191 198 198 205 205

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1

011201030 011201040 011201050 011201060 011201070 011201075 011201080 011201090 011201100 011201110 011201120 011201125 011201130 011201140 011201150 011201160 011201170 011201175 011201180 011201190 011201200 011201210 011201220 011201225 011201230 011201240 011201250 011201260 011201270 011201275 011201280 011201290 011201300 011201325 011201350 011201375 011201400 011201425 011201450 011201475 011201500 011201525 011201550 011201575 011201600 011201650 011201700 011201750 011201800 011201850 011201900 011201950 011202000

€ cad/each

25,573 25,573 24,506 29,611 29,611 29,611 29,611 29,611 28,271 32,173 32,173 32,173 32,173 32,173 29,982 33,609 33,609 33,609 33,609 33,609 32,650 37,374 37,374 37,374 37,374 37,374 35,320 39,782 39,782 39,782 39,782 39,782 38,059 57,568 57,568 57,568 57,568 78,773 78,773 78,773 78,773 84,371 84,371 84,371 84,371 102,677 102,677 116,367 116,367 130,057 130,057 147,853 147,853

PUNTE ELICOIDALI AL COBALTO 8%, SERIE CORTA, CODOLO RIDOTTO

Cobalt straight shank twist drills, stub serie

01122

HSS-CO 8%

Confezione Packaging <5 d

d d=10 mm

R ≤ 1400 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

Art. 01124 Self Disponibile su richiesta On demand

01123

HSS-CO 8%

d=13 mm R ≤ 1400 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

Ø h8

pcs.

cod.

10,25 10,5 10,75 11 11,25 11,5 11,75 12 12,25 12,5 12,75 13 13,25 13,5 13,75 14 14,25 14,5 14,75 15 15,25 15,5 15,75 16 16,5 17 17,5 18 18,5 19 19,5 20

87 87 94 94 94 94 94 101 101 101 101 101 108 108 108 108 114 114 114 114 120 120 120 120 125 125 130 130 135 135 140 140

133 133 142 142 142 142 142 151 151 151 151 151 160 160 160 160 169 169 169 169 178 178 178 178 184 184 191 191 198 198 205 205

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1

011221025 011221050 011221075 011221100 011221125 011221150 011221175 011221200 011221225 011221250 011221275 011221300 011221325 011221350 011221375 011221400 011221425 011221450 011221475 011221500 011221525 011221550 011221575 011221600 011221650 011221700 011221750 011221800 011221850 011221900 011221950 011222000

€ cad/each

28,489 28,489 32,665 32,665 36,211 36,211 39,647 39,647 43,068 43,068 46,328 46,328 63,700 63,700 63,700 63,700 76,281 76,281 76,281 76,281 90,807 90,807 90,807 90,807 105,153 105,153 121,432 141,213 141,213 141,213 158,723 158,723

Codolo ridotto - 13 mm

DIN 338 RETTIFICATA

Packaging

Reduced shank - 10 mm

Reduced shank - 13 mm

Ground from the solid

Confezione <5 d

Codolo ridotto - 10mm

DIN 338 RETTIFICATA

Ground from the solid

Ø h8

pcs.

cod.

13,25 13,5 13,75 14 14,25 14,5 14,75 15 15,25 15,5 15,75 16 16,5 17 17,5 18 18,5 19 19,5 20

108 108 108 108 114 114 114 114 120 120 120 120 125 125 130 130 135 135 140 140

160 160 160 160 169 169 169 169 178 178 178 178 184 184 191 191 198 198 205 205

13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13

3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1

011231325 011231350 011231375 011231400 011231425 011231450 011231475 011231500 011231525 011231550 011231575 011231600 011231650 011231700 011231750 011231800 011231850 011231900 011231950 011232000

€ cad/each

63,700 63,700 63,700 63,700 76,281 76,281 76,281 76,281 90,807 90,807 90,807 90,807 105,153 105,153 121,432 121,432 139,064 139,064 158,723 158,723

PUNTE ELICOIDALI AL COBALTO 8%, SERIE EXTRA CORTA, SERIE LUNGA

Cobalt straight shank twist drills, stub serie

01126 130°

W 27°

HSS-CO 8%

Serie extra corta

DIN 1897

Confezione Packaging

HV 850÷920 AISI M42 SPLIT POINT DIN 1412 C

<3 d

Stub serie

Ø h8

pcs.

cod.

3 3,25 3,5 3,75 4 4,25 4,5 4,75 5 5,5 6

16 18 20 20 22 22 24 24 26 28 28

46 49 52 52 55 55 58 58 62 66 66

10 10 10 10 10 10 10 10 10 10 10

011260300 011260325 011260350 011260375 011260400 011260425 011260450 011260475 011260500 011260550 011260600

€ cad/each

2,835 3,601 3,601 3,956 3,956 4,533 4,533 4,805 4,805 6,502 6,776

Applicazioni Applications

INOX

Inox Stainless

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

01128 130°

W 27°

HV 850÷920 AISI M42 SPLIT POINT DIN 1412 C

<8 d

Applicazioni Applications

INOX

Inox Stainless

Metalli Metals

HSS-CO 8%

Serie lunga

DIN 340

Confezione Packaging

Long serie

Ø h8

pcs.

cod.

3 3,25 3,5 3,75 4 4,25 4,5 4,75 5 5,25 5,5 5,75 6 6,5 7 7,5 8 8,5 9 9,5 10

66 69 73 73 78 78 82 82 87 87 91 91 91 97 102 102 109 109 115 115 121

100 106 112 112 119 119 126 126 132 132 139 139 139 148 156 156 165 165 175 175 184

10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5

011280300 011280325 011280350 011280375 011280400 011280425 011280450 011280475 011280500 011280525 011280550 011280575 011280600 011280650 011280700 011280750 011280800 011280850 011280900 011280950 011281000

€ cad/each

5,887 6,625 6,625 7,980 7,980 9,514 9,514 10,432 9,939 12,183 11,610 15,211 14,497 16,975 19,644 24,985 27,928 32,077 36,552 42,097 49,587

Acciaio Steel

Emulsione Lubrificant

PUNTE ELICOIDALI CILINDRICHE AL COBALTO RIVESTITE AL TiAlN HSS-CO TiAlN coated twist drills

01300 130°

W 27°

HSS-CO 5% Confezione Packaging

HV 0,05 3300 Riv. TiAlN

<5 d

R ≥ 1300 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Metalli Metals

Acciaio Steel

Taglio a secco, ad altissima velocità di rotazione ed avanzamento su tutti gli acciai durissimi (acciai alto legati in genere, acciai inox) e materiali fortemente abrasivi (ghisa, leghe Al-Si). H.S.C. in high alloy steel, stainless steel, abrasive metals as cast iron, Al-Si Alloys.

Serie corta

TiAlN

DIN 338

Ø h8

pcs.

cod.

1 1,25 1,5 1,75 2 2,25 2,5 2,75 3 3,2 3,25 3,5 3,75 4 4,2 4,25 4,5 4,75 4,8 5 5,2 5,25 5,5 5,75 6 6,25 6,5 6,75 7 7,25 7,5 7,75 8 8,25 8,5 8,75 9 9,25 9,5 9,75 10 10,25 10,5 10,75 11 11,25 11,5 11,75 12 12,25 12,5 12,75 13

12 16 18 22 24 27 30 33 33 36 36 39 39 43 43 43 47 47 52 52 52 52 57 57 57 63 63 69 69 69 69 75 75 75 75 81 81 81 81 87 87 87 87 94 94 94 94 94 101 101 101 101 101

34 38 40 46 49 53 57 61 61 65 65 70 70 75 75 75 80 80 86 86 86 86 93 93 93 101 101 109 109 109 109 117 117 117 117 125 125 125 125 133 133 133 133 142 142 142 142 142 151 151 151 151 151

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

013000100 013000125 013000150 013000175 013000200 013000225 013000250 013000275 013000300 013000320 013000325 013000350 013000375 013000400 013000420 013000425 013000450 013000475 013000480 013000500 013000520 013000525 013000550 013000575 013000600 013000625 013000650 013000675 013000700 013000725 013000750 013000775 013000800 013000825 013000850 013000875 013000900 013000925 013000950 013000975 013001000 013001025 013001050 013001075 013001100 013001125 013001150 013001175 013001200 013001225 013001250 013001275 013001300

Short serie € cad/each

7,834 8,046 8,046 7,892 7,892 7,892 7,892 7,892 7,892 8,521 8,521 8,521 8,678 8,678 10,550 10,550 10,550 10,550 10,550 10,550 11,747 11,747 11,747 11,747 11,747 17,124 17,124 18,097 18,097 18,097 18,097 19,338 19,338 21,068 21,068 22,720 22,720 23,406 23,406 26,254 26,254 32,370 32,370 34,621 34,621 35,364 35,364 37,048 37,048 39,731 39,731 42,137 42,137

PUNTE ELICOIDALI CON AFFILATURA A CROCE ED ELICA SPECIALE AD ALTA RESISTENZA PER FORATURE PROFONDE

Twist drills cross cut sharpened and special “high resistance flute design” for deep in to cutting, short serie

130°

HSS-CO 5%

W 35°

HSS-CO

Parabolic

DIN 1412/C HV 800÷860 AFFILATURA A CROCE Cross sharpening

≤5 d

≤5Ø

R ≤ 1300 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Confezione Packaging

TiAlN

Serie corta

DIN 338 RETTIFICATA

Short serie

Ground from the solid

Ø h8

pcs.

cod.

2 2,25 2,5 2,75 3 3,2 3,25 3,5 3,75 4 4,2 4,25 4,5 4,75 4,8 5 5,2 5,25 5,5 5,75 6 6,25 6,5 6,75 7 7,5 8 8,5 9 9,5 10 10,5 11 11,5 12 12,5 13

24 27 30 33 33 36 36 39 39 43 43 43 47 47 52 52 52 52 57 57 57 63 63 63 69 69 75 75 81 81 87 87 94 94 101 101 101

49 53 57 61 61 65 65 70 70 75 75 75 80 80 86 86 86 86 93 93 93 101 101 101 109 109 117 117 125 125 133 133 142 142 151 151 151

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

013050200 013050225 013050250 013050275 013050300 013050320 013050325 013050350 013050375 013050400 013050420 013050425 013050450 013050475 013050480 013050500 013050520 013050525 013050550 013050575 013050600 013050625 013050650 013050675 013050700 013050750 013050800 013050850 013050900 013050950 013051000 013051050 013051100 013051150 013051200 013051250 013051300

€ cad/each

10,340 10,340 10,340 10,537 10,537 10,876 10,876 10,876 11,213 11,213 13,298 13,298 13,298 13,696 13,696 13,696 14,581 14,581 14,581 15,172 15,172 19,984 19,984 21,267 21,267 22,467 23,520 26,205 30,176 32,153 34,132 39,976 42,409 46,493 46,493 54,189 57,401

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

Punte con ottima resistenza alle sollecitazioni termiche, adatte per forare acciai legati e non con R sino a 1200 N/mm2, in modo particolare acciai da bonifica, acciai per lavorazioni a caldo e a freddo, acciai inossidabili, ghisa etc. High performance in cutting alloy steel, cast iron, stainless steel and metals up to R ≤ 1200 N/mm2.

PARABOLIC

01305

PUNTE ELICOIDALI CON AFFILATURA A CROCE ED ELICA SPECIALE AD ALTA RESISTENZA PER FORATURE PROFONDE

Twist drills cross cut sharpened and special “high resistance flute design” for deep in to cutting, short serie

PARABOLIC

01307 130°

HSS-CO 5%

W 35°

HSS-CO+TiAlN Parabolic

DIN 1412/C HV 800÷860 AFFILATURA A CROCE Cross sharpening

<3 d

≤3Ø

R ≤ 1300 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

Confezione Packaging

TiAlN

Serie extra corta

DIN 1897 RETTIFICATA

Extra short serie

Ground from the solid

Ø h8

pcs.

cod.

3 3,2 3,25 3,3 3,5 3,7 3,75 3,8 4 4,2 4,25 4,5 4,7 4,75 4,8 5 5,2 5,25 5,5 5,7 5,75 5,8 6 6,5 6,8 7 7,5 8 8,5 9 9,5 10 10,5 11 11,5 12 12,5 13

16 18 18 18 20 20 20 22 22 22 22 24 24 24 26 26 26 26 28 28 28 28 28 31 34 34 34 37 37 40 40 43 43 47 47 51 51 51

46 49 49 49 52 52 52 55 55 55 55 58 58 58 62 62 62 62 66 66 66 66 66 70 74 74 74 79 79 84 84 89 89 95 95 102 102 102

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

013070300 013070320 013070325 013070330 013070350 013070370 013070375 013070380 013070400 013070420 013070425 013070450 013070470 013070475 013070480 013070500 013070520 013070525 013070550 013070570 013070575 013070580 013070600 013070650 013070680 013070700 013070750 013070800 013070850 013070900 013070950 013071000 013071050 013071100 013071150 013071200 013071250 013071300

€ cad/each

9,455 9,496 9,496 9,496 9,582 9,812 9,812 9,812 9,812 11,161 11,161 11,444 11,885 11,885 11,885 11,885 12,918 12,918 12,550 14,402 14,402 14,402 12,781 16,897 17,460 18,078 18,489 19,108 24,732 24,732 29,669 29,669 36,786 38,071 39,482 42,134 44,588 44,588

PUNTE ELICOIDALI CON AFFILATURA A CROCE ED ELICA SPECIALE AD ALTA RESISTENZA PER FORATURE PROFONDE - SERIE LUNGA

Twist drills cross cut sharpened and special “high resistance flute design” for deep in to cutting, short serie

130°

HSS-CO 5%

W 35°

HSS-CO+TiAlN Parabolic

DIN 1412/C HV 800÷860 AFFILATURA A CROCE Cross sharpening

<8 d

≤8Ø

R ≤ 1300 N/mm2

Confezione Packaging

TiAlN

Serie lunga

DIN 340 RETTIFICATA

Long serie

Ground from the solid

Ø h8

pcs.

cod.

2,5 3 3,25 3,5 3,75 4 4,25 4,5 4,75 5 5,25 5,5 5,75 6 6,25 6,5 7 7,5 8 8,5 9 9,5 10 10,5 11 11,5 12 12,5 13

62 66 69 73 73 78 78 82 82 87 87 91 91 91 97 97 102 102 109 109 115 115 121 121 128 128 134 134 134

95 100 106 112 112 119 119 126 126 132 132 139 139 139 148 148 156 156 165 165 175 175 184 184 195 195 205 205 205

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

013060250 013060300 013060325 013060350 013060375 013060400 013060425 013060450 013060475 013060500 013060525 013060550 013060575 013060600 013060625 013060650 013060700 013060750 013060800 013060850 013060900 013060950 013061000 013061050 013061100 013061150 013061200 013061250 013061300

€ cad/each

12,496 12,844 13,792 13,792 14,392 14,392 17,065 17,065 17,563 17,563 19,351 19,351 19,351 19,351 27,248 27,248 29,753 31,184 34,364 38,134 39,828 40,229 44,294 55,169 58,676 59,528 68,161 71,951 74,204

Applicazioni Applications

INOX

Inox Stainless

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

PARABOLIC

01306

PUNTE ELICOIDALI CON AFFILATURA A CROCE ED ELICA SPECIALE AD ALTA RESISTENZA PER FORATURE PROFONDE - SERIE CORTA

Twist drills cross cut sharpened and special “high resistance flute design” for deep in to cutting, short serie

PARABOLIC

01140 130°

HSS-CO 5%

W 35°

HSS-CO

Parabolic

DIN 1412/C HV 800÷860 AFFILATURA A CROCE Cross sharpening

≤5 d

≤5Ø

R ≤ 1200 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Metalli Metals

Confezione Packaging

Serie corta

DIN 338 RETTIFICATA

Short serie

Ground from the solid Ø h8

pcs.

cod.

2 2,25 2,5 2,75 3 3,2 3,25 3,5 3,75 4 4,2 4,25 4,5 4,75 4,8 5 5,2 5,25 5,5 5,75 6 6,25 6,5 6,75 7 7,5 8 8,5 9 9,5 10 10,5 11 11,5 12 12,5 13

24 27 30 33 33 36 36 39 39 43 43 43 47 47 52 52 52 52 57 57 57 63 63 63 69 69 75 75 81 81 87 87 94 94 101 101 101

49 53 57 61 61 65 65 70 70 75 75 75 80 80 86 86 86 86 93 93 93 101 101 101 109 109 117 117 125 125 133 133 142 142 151 151 151

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5

011400200 011400225 011400250 011400275 011400300 011400320 011400325 011400350 011400375 011400400 011400420 011400425 011400450 011400475 011400480 011400500 011400520 011400525 011400550 011400575 011400600 011400625 011400650 011400675 011400700 011400750 011400800 011400850 011400900 011400950 011401000 011401050 011401100 011401150 011401200 011401250 011401300

€ cad/each

2,686 2,686 2,686 2,864 2,864 3,191 3,191 3,191 3,519 3,519 4,240 4,240 4,240 4,637 4,637 4,637 5,481 5,481 5,481 6,065 6,065 7,868 7,868 9,117 9,117 10,276 11,305 13,910 15,062 16,985 18,896 22,128 24,485 28,450 28,450 34,037 37,160

Acciaio Steel

Emulsione Lubrificant

PUNTE ELICOIDALI CON AFFILATURA A CROCE ED ELICA SPECIALE AD ALTA RESISTENZAPER FORATURE PROFONDE

Twist drills cross cut sharpened and special “high resistance flute design” for deep in to cutting

130°

HSS-CO 5%

W 35°

HSS-CO

Parabolic

DIN 1412/C HV 800÷860 AFFILATURA A CROCE Cross sharpening

<3 d

≤3Ø

R ≤ 1200 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Metalli Metals

Acciaio Steel

Confezione Packaging

Serie extra corta

DIN 1897 RETTIFICATA

Extra short serie

Ground from the solid Ø h8

pcs.

cod.

3 3,2 3,25 3,3 3,5 3,7 3,75 3,8 4 4,2 4,25 4,5 4,7 4,75 4,8 5 5,2 5,25 5,5 5,7 5,75 5,8 6 6,5 6,8 7 7,5 8 8,5 9 9,5 10 10,5 11 11,5 12 12,5 13

16 18 18 18 20 20 20 22 22 22 22 24 24 24 26 26 26 26 28 28 28 28 28 31 34 34 34 37 37 40 40 43 43 47 47 51 51 51

46 49 49 49 52 52 52 55 55 55 55 58 58 58 62 62 62 62 66 66 66 66 66 70 74 74 74 79 79 84 84 89 89 95 95 102 102 102

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5

011430300 011430320 011430325 011430330 011430350 011430370 011430375 011430380 011430400 011430420 011430425 011430450 011430470 011430475 011430480 011430500 011430520 011430525 011430550 011430570 011430575 011430580 011430600 011430650 011430680 011430700 011430750 011430800 011430850 011430900 011430950 011431000 011431050 011431100 011431150 011431200 011431250 011431300

€ cad/each

1,821 1,864 1,864 1,864 1,953 2,180 2,180 2,180 2,180 2,288 2,431 2,581 3,028 3,216 3,330 3,330 3,895 3,895 3,537 5,352 5,352 5,352 3,756 4,906 7,132 6,054 6,461 7,065 9,840 9,840 14,666 14,666 19,135 20,393 21,771 24,358 24,873 24,873

Emulsione Lubrificant

PARABOLIC

01143

PUNTE ELICOIDALI CON AFFILATURA A CROCE ED ELICA SPECIALE AD ALTA RESISTENZA PER FORATURE PROFONDE

Twist drills cross cut sharpened and special “high resistance flute design” for deep in to cutting

PARABOLIC

01141 130°

HSS-CO 5%

W 35°

HSS-CO

Parabolic

DIN 1412/C HV 800÷860 AFFILATURA A CROCE Cross sharpening

<8 d

Ø ≤8Ø

R ≤ 1200 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

Confezione Packaging

Serie lunga

DIN 340 RETTIFICATA

Long serie

Ground from the solid Ø h8

pcs.

cod.

2,5 3 3,25 3,5 3,75 4 4,25 4,5 4,75 5 5,25 5,5 5,75 6 6,25 6,5 7 7,5 8 8,5 9 9,5 10 10,5 11 11,5 12 12,5 13

62 66 69 73 73 78 78 82 82 87 87 91 91 91 97 97 102 102 109 109 115 115 121 121 128 128 134 134 134

95 100 106 112 112 119 119 126 126 132 132 139 139 139 148 148 156 156 165 165 175 175 184 184 195 195 205 205 205

10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

011410250 011410300 011410325 011410350 011410375 011410400 011410425 011410450 011410475 011410500 011410525 011410550 011410575 011410600 011410625 011410650 011410700 011410750 011410800 011410850 011410900 011410950 011411000 011411050 011411100 011411150 011411200 011411250 011411300

€ cad/each

4,806 5,144 6,075 6,075 6,649 6,649 7,948 7,948 8,434 8,434 10,177 10,177 10,177 10,177 15,011 15,011 17,460 18,847 20,889 22,930 24,584 24,970 26,883 37,090 40,518 41,340 45,503 46,899 49,100

PUNTE ELICOIDALI CILINDRICHE AL COBALTO 5%, SERIE EXTRA LUNGA Cobalt extra long straight shank twist drills

130°

W 35°

HSS-CO 5%

Confezione Packaging

≥10 d

Applicazioni

Serie extra lunga

DIN 1869/1 PARABOLIC

Extra long serie

Ø h8

pcs.

cod.

3 3,5 4 4,5 5 5,5 6 6,5 7 7,5 8 8,5 9 9,5 10

100 115 120 125 135 140 140 150 155 155 165 165 175 175 185

150 165 175 185 195 205 205 215 225 225 240 240 250 250 265

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

013760300 013760350 013760400 013760450 013760500 013760550 013760600 013760650 013760700 013760750 013760800 013760850 013760900 013760950 013761000

€ cad/each

39,006 39,006 39,836 41,380 31,891 36,941 37,399 46,156 52,915 56,626 52,692 69,550 71,244 84,648 77,119

Applications

INOX

Inox Stainless

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

01377 130°

W 35°

≥10 d

Applicazioni Applications

INOX

HSS-CO 5% Confezione Packaging

Serie extra lunga

DIN 1869/2 PARABOLIC

Extra long serie

Ø h8

pcs.

cod.

3 3,5 4 4,5 5 5,5 6 6,5 7 7,5 8 8,5 9 9,5 10

130 145 150 160 170 180 180 190 200 200 210 210 220 220 235

190 210 220 235 245 260 260 275 290 290 305 305 320 320 340

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

013770300 013770350 013770400 013770450 013770500 013770550 013770600 013770650 013770700 013770750 013770800 013770850 013770900 013770950 013771000

€ cad/each

55,732 49,212 50,356 54,072 51,605 56,281 53,138 79,574 84,286 88,729 88,378 96,571 92,836 107,195 89,978

Inox Stainless

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

PARABOLIC

01376

PUNTE ELICOIDALI CILINDRICHE AL COBALTO 5%, SERIE EXTRA LUNGA Cobalt extra long straight shank twist drills

PARABOLIC

01378 130°

W 35°

≥10 d

Applicazioni Applications

INOX

Inox Stainless

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

HSS-CO 5% Confezione Packaging

DIN 1869/3

Serie extra lunga

PARABOLIC

Extra long serie

Ø h8

pcs.

cod.

3 3,5 4 4,5 5 5,5 6 6,5 7 7,5 8 8,5 9 9,5 10 10,5 11 11,5 12 12,5 13

160 180 190 200 210 225 225 235 250 250 265 265 280 280 295 295 310 310 330 330 330

240 265 280 295 315 330 330 350 370 370 390 390 410 410 430 430 455 455 480 480 480

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

013780300 013780350 013780400 013780450 013780500 013780550 013780600 013780650 013780700 013780750 013780800 013780850 013780900 013780950 013781000 013781050 013781100 013781150 013781200 013781250 013781300

€ cad/each

72,458 64,023 65,503 70,287 70,926 69,393 66,783 98,057 103,930 109,356 105,334 125,603 114,464 144,724 140,212 162,964 220,879 243,318 245,385 245,385 259,677

PUNTE ELICOIDALI AL COBALTO 5% CON ELICA RAPIDA TIPO W, PER IL TAGLIO DEGLI ACCIAI INOX, ACCIAI RESISTENTI AL CALORE ED AUSTENITICI (V2A-V4A) Cobalt twist drill with W type flute to cut stainless steel, heat resistant steel, austenitic steel (V2A-V4A)

01139 130°

W 36°

HSS-CO 5%

Confezione Packaging

HV 800÷860 AISI M35 SPLIT POINT DIN 1412 C (Ø≥3 mm)

<5 d

W 36°

R ≤ 1200 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

Serie corta

DIN 338 RETTIFICATA W36°

Short serie

Ground from the solid Ø h8

pcs.

cod.

cad/each

€

1 1,25 1,5 1,75 2 2,25 2,5 2,75 2,8 3 3,2 3,25 3,3 3,4 3,5 3,7 3,75 3,8 4 4,1 4,2 4,25 4,5 4,75 4,8 5 5,2 5,25 5,5 5,75 6 6,25 6,5 6,75 7 7,25 7,5 7,75 8 8,25 8,5 8,75 9 9,25 9,5 9,75 10 10,25 10,5 10,75 11 11,25 11,5 11,75 12 12,25 12,5 12,75 13

12 16 18 22 24 27 30 33 33 33 36 36 36 39 39 39 39 43 43 43 43 43 47 47 52 52 52 52 57 57 57 63 63 69 69 69 69 75 75 75 75 81 81 81 81 87 87 87 87 94 94 94 94 94 101 101 101 101 101

34 38 40 46 49 53 57 61 61 61 65 65 65 70 70 70 70 75 75 75 75 75 80 80 86 86 86 86 93 93 93 101 101 109 109 109 109 117 117 117 117 125 125 125 125 133 133 133 133 142 142 142 142 142 151 151 151 151 151

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

011390100 011390125 011390150 011390175 011390200 011390225 011390250 011390275 011390280 011390300 011390320 011390325 011390330 011390340 011390350 011390370 011390375 011390380 011390400 011390410 011390420 011390425 011390450 011390475 011390480 011390500 011390520 011390525 011390550 011390575 011390600 011390625 011390650 011390675 011390700 011390725 011390750 011390775 011390800 011390825 011390850 011390875 011390900 011390925 011390950 011390975 011391000 011391025 011391050 011391075 011391100 011391125 011391150 011391175 011391200 011391225 011391250 011391275 011391300

2,475 2,475 1,939 2,218 1,761 1,939 1,939 1,939 1,939 1,939 1,939 2,308 2,308 2,386 2,386 2,475 2,821 2,821 2,664 2,921 2,921 3,099 2,999 3,277 3,277 3,277 3,624 3,624 4,415 4,415 4,415 7,124 7,637 9,799 9,152 10,301 10,301 11,048 11,048 11,816 11,694 14,357 14,357 15,506 15,506 17,022 17,022 21,348 21,348 25,026 25,026 26,176 26,176 28,951 28,951 31,615 31,615 32,262 32,262

V2A è la classificazione tedesca dell’acciaio inox 304, mentre V4A è l’inox 316. V2A is german standard for 304 stainless steel, V4A is 316 stainless steel.

PUNTE ELICOIDALI AL COBALTO 5%, ESECUZIONE INTERAMENTE RETTIFICATA, SERIE CORTA Cobalt twist drills ground from the solid

01145 130°

HSS-CO 5%

W 27°

Confezione Packaging

HV 800÷860 AISI M35 SPLIT POINT DIN 1412 C (Ø≥3 mm)

<5 d

R ≤ 1200 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

Art. 01144 Self Disponibile su richiesta On demand

Serie corta

DIN 338

Short serie

Ground from the solid Ø h8

pcs.

cod.

0,2 0,25 0,3 0,35 0,4 0,45 0,5 0,55 0,6 0,65 0,7 0,75 0,8 0,85 0,9 0,95 1 1,1 1,2 1,25 1,3 1,4 1,5 1,6 1,7 1,75 1,8 1,9 2 2,1 2,2 2,25 2,3 2,4 2,5 2,6 2,7 2,75 2,8 2,9 3 3,1 3,2 3,25 3,3 3,4 3,5 3,6 3,7 3,75 3,8 3,9 4 4,1 4,2 4,25 4,3 4,4 4,5 4,6 4,7 4,75 4,8

2,5 3 3 4 5 5 6 7 7 8 9 9 10 10 11 11 12 14 16 16 16 18 18 20 20 22 22 22 24 24 27 27 27 30 30 30 33 33 33 33 33 36 36 36 36 39 39 39 39 39 43 43 43 43 43 43 47 47 47 47 47 47 52

19 19 19 19 20 20 22 24 24 26 28 28 30 30 32 32 34 36 38 38 38 40 40 43 43 46 46 46 49 49 53 53 53 57 57 57 61 61 61 61 61 65 65 65 65 70 70 70 70 70 75 75 75 75 75 75 80 80 80 80 80 80 86

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

011450020 011450025 011450030 011450035 011450040 011450045 011450050 011450055 011450060 011450065 011450070 011450075 011450080 011450085 011450090 011450095 011450100 011450110 011450120 011450125 011450130 011450140 011450150 011450160 011450170 011450175 011450180 011450190 011450200 011450210 011450220 011450225 011450230 011450240 011450250 011450260 011450270 011450275 011450280 011450290 011450300 011450310 011450320 011450325 011450330 011450340 011450350 011450360 011450370 011450375 011450380 011450390 011450400 011450410 011450420 011450425 011450430 011450440 011450450 011450460 011450470 011450475 011450480

cad/each

€

Ø h8

pcs.

cod.

cad/each

€

2,591 2,591 2,591 2,591 2,591 2,591 2,591 2,591 2,591 2,591 2,591 2,591 2,591 2,591 2,591 2,591 1,655 1,834 1,834 1,834 1,834 1,834 1,655 1,750 1,750 1,750 1,750 1,750 1,595 1,943 1,943 1,943 1,943 1,943 1,679 1,847 1,847 1,847 1,847 1,847 1,679 2,301 2,301 2,301 2,301 2,301 2,087 2,722 2,722 2,722 2,722 2,722 2,482 3,129 3,129 3,129 3,129 3,129 2,843 3,298 3,298 3,298 3,298

4,9 5 5,1 5,2 5,25 5,3 5,4 5,5 5,6 5,7 5,75 5,8 5,9 6 6,1 6,2 6,25 6,3 6,4 6,5 6,6 6,7 6,75 6,8 6,9 7 7,1 7,2 7,25 7,3 7,4 7,5 7,6 7,7 7,75 7,8 7,9 8 8,1 8,2 8,25 8,3 8,4 8,5 8,6 8,7 8,75 8,8 8,9 9 9,1 9,2 9,25 9,3 9,4 9,5 9,6 9,7 9,75 9,8 9,9 10 10,1

52 52 52 52 52 52 57 57 57 57 57 57 57 57 63 63 63 63 63 63 63 63 69 69 69 69 69 69 69 69 69 69 75 75 75 75 75 75 75 75 75 75 75 75 81 81 81 81 81 81 81 81 81 81 81 81 87 87 87 87 87 87 87

86 86 86 86 86 86 93 93 93 93 93 93 93 93 101 101 101 101 101 101 101 101 109 109 109 109 109 109 109 109 109 109 117 117 117 117 117 117 117 117 117 117 117 117 125 125 125 125 125 125 125 125 125 125 125 125 133 133 133 133 133 133 133

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

011450490 011450500 011450510 011450520 011450525 011450530 011450540 011450550 011450560 011450570 011450575 011450580 011450590 011450600 011450610 011450620 011450625 011450630 011450640 011450650 011450660 011450670 011450675 011450680 011450690 011450700 011450710 011450720 011450725 011450730 011450740 011450750 011450760 011450770 011450775 011450780 011450790 011450800 011450810 011450820 011450825 011450830 011450840 011450850 011450860 011450870 011450875 011450880 011450890 011450900 011450910 011450920 011450925 011450930 011450940 011450950 011450960 011450970 011450975 011450980 011450990 011451000 011451010

3,298 2,999 4,018 4,018 4,018 4,018 4,018 3,825 4,629 4,629 4,629 4,629 4,629 4,245 5,455 5,455 5,455 5,455 5,455 5,049 6,668 6,668 6,668 6,668 6,668 6,165 7,435 7,435 7,435 7,435 7,435 6,764 8,756 8,756 8,756 8,756 8,756 7,962 9,271 9,271 9,271 9,271 9,271 8,430 11,333 11,333 11,333 11,333 11,333 10,302 11,859 11,859 11,859 11,859 11,859 10,782 13,767 13,767 13,767 13,767 13,767 12,519 16,393

Serie corta Short serie

Ø h8

pcs.

cod.

10,2 10,25 10,3 10,4 10,5 10,6 10,7 10,75 10,8 10,9 11 11,1 11,2 11,25 11,3 11,4 11,5 11,6 11,7 11,75 11,8 11,9 12 12,1 12,2 12,25 12,3 12,4 12,5 12,6 12,7 12,75 12,8 12,9 13 13,1 13,2 13,25 13,3 13,4 13,5 13,6 13,7 13,75 13,8 13,9 14 14,1 14,2 14,25 14,3 14,4 14,5 14,6 14,7 14,75 14,8 14,9 15 15,1 15,2 15,25 15,3

87 87 87 87 87 87 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 108 108 108 108 108 108 108 108 108 108 108 114 114 114 114 114 114 114 114 114 114 114 120 120 120 120

133 133 133 133 133 133 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 151 151 151 151 151 151 151 151 151 151 151 151 151 151 151 151 160 160 160 160 160 160 160 160 160 160 160 169 169 169 169 169 169 169 169 169 169 169 178 178 178 178

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3

011451020 011451025 011451030 011451040 011451050 011451060 011451070 011451075 011451080 011451090 011451100 011451110 011451120 011451125 011451130 011451140 011451150 011451160 011451170 011451175 011451180 011451190 011451200 011451210 011451220 011451225 011451230 011451240 011451250 011451260 011451270 011451275 011451280 011451290 011451300 011451310 011451320 011451325 011451330 011451340 011451350 011451360 011451370 011451375 011451380 011451390 011451400 011451410 011451420 011451425 011451430 011451440 011451450 011451460 011451470 011451475 011451480 011451490 011451500 011451510 011451520 011451525 011451530

€ cad/each

16,393 16,393 16,393 16,393 14,906 18,540 18,540 18,540 18,540 18,540 16,850 20,206 20,206 20,206 20,206 20,206 18,372 22,246 22,246 22,246 22,246 22,246 20,219 24,057 24,057 24,057 24,057 24,057 21,874 26,205 26,205 26,205 26,205 26,205 23,817 37,777 37,777 37,777 37,777 37,777 37,777 39,814 39,814 39,814 39,814 39,814 39,814 43,918 43,918 43,918 43,918 43,918 43,918 46,171 46,171 46,171 46,171 46,171 46,171 46,171 46,171 46,171 53,128

Ø h8

pcs.

cod.

15,4 15,5 15,6 15,7 15,75 15,8 15,9 16 16,25 16,5 16,75 17 17,25 17,5 17,75 18 18,25 18,5 18,75 19 19,25 19,5 19,75 20

120 120 120 120 120 120 120 120 125 125 125 125 130 130 130 130 135 135 135 135 140 140 140 140

178 178 178 178 178 178 178 178 184 184 184 184 191 191 191 191 198 198 198 198 205 205 205 205

3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

011451540 011451550 011451560 011451570 011451575 011451580 011451590 011451600 011451625 011451650 011451675 011451700 011451725 011451750 011451775 011451800 011451825 011451850 011451875 011451900 011451925 011451950 011451975 011452000

€ cad/each

53,128 53,128 53,128 53,128 54,409 54,409 54,409 54,409 55,345 55,345 55,345 55,345 71,835 71,835 71,835 71,835 82,483 82,483 82,483 82,483 95,293 95,293 95,293 95,293

PUNTE ELICOIDALI AL COBALTO 5% CON CODOLO RIDOTTO, ESECUZIONE RETTIFICATA, SERIE CORTA Cobalt twist drills ground from the solid

01147

HSS-CO 5%

Confezione Packaging

d d=10 mm

R ≤ 1200 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Codolo ridotto - 10mm

DIN 338

Reduced shank - 10mm

Ø h8

pcs.

cod.

10,25 10,5 10,75 11 11,25 11,5 11,75 12 12,25 12,5 12,75 13 13,25 13,5 13,75 14 14,25 14,5 14,75 15 15,25 15,5 15,75 16 16,5 17 17,5 18 18,5 19 19,5 20

87 87 94 94 94 94 94 101 101 101 101 101 108 108 108 108 114 114 114 114 120 120 120 120 125 125 130 130 135 135 140 140

133 133 142 142 142 142 142 151 151 151 151 151 160 160 160 160 169 169 169 169 178 178 178 178 184 184 191 191 198 198 205 205

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1

011471025 011471050 011471075 011471100 011471125 011471150 011471175 011471200 011471225 011471250 011471275 011471300 011471325 011471350 011471375 011471400 011471425 011471450 011471475 011471500 011471525 011471550 011471575 011471600 011471650 011471700 011471750 011471800 011471850 011471900 011471950 011472000

€ cad/each

17,897 16,505 19,907 18,322 21,465 19,748 23,374 21,478 25,081 23,027 27,079 24,845 38,510 38,510 39,519 39,519 44,684 44,684 46,143 46,143 53,666 53,666 55,596 55,596 56,471 56,471 72,695 72,695 83,439 83,439 97,057 97,057

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

High performance in cutting alloy steel, cast iron, stainless steel and metals up to R ≤ 1200 N/mm2.

Art. 01151 Self Disponibile su richiesta On demand

PUNTE ELICOIDALI AL COBALTO 5% CON CODOLO RIDOTTO, ESECUZIONE RETTIFICATA, SERIE CORTA Cobalt twist drills ground from the solid

01146

HSS-CO 5%

Confezione Packaging

d d=13 mm

R ≤ 1200 N/mm2

Applicazioni Applications

INOX

Codolo ridotto - 13mm

DIN 338

Reduced shank - 13mm

Ø h8

pcs.

cod.

13,25 13,5 13,75 14 14,25 14,5 14,75 15 15,25 15,5 15,75 16 16,5 17 17,5 18 18,5 19 19,5 20 20,5 21 21,5 22 22,5 23 23,5 24 24,5 25

108 108 108 108 114 114 114 114 120 120 120 120 125 125 130 130 135 135 140 140 145 145 150 150 150 155 155 160 160 160

160 160 160 160 169 169 169 169 178 178 178 178 184 184 191 191 198 198 205 205 213 213 221 221 221 229 229 236 236 236

13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13

3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

011461325 011461350 011461375 011461400 011461425 011461450 011461475 011461500 011461525 011461550 011461575 011461600 011461650 011461700 011461750 011461800 011461850 011461900 011461950 011462000 011462050 011462100 011462150 011462200 011462250 011462300 011462350 011462400 011462450 011462500

€ cad/each

38,510 38,510 39,519 39,519 44,684 44,684 46,143 46,143 53,666 53,666 55,596 55,596 56,471 56,471 72,695 72,695 83,439 83,439 97,057 97,057 100,997 100,997 102,364 102,364 109,945 109,945 118,615 118,615 127,637 127,637

Inox Stainless

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

High performance in cutting alloy steel, cast iron, stainless steel and metals up to R ≤ 1200 N/mm2.

PUNTE ELICOIDALI AL COBALTO 5%, SERIE EXTRA CORTA

Cobalt straight shank twist drills, stub serie

01149 130°

HSS-CO 5%

Confezione

W 27°

Packaging

HV 800÷860 AISI M35 SPLIT POINT DIN 1412 C

<3 d

Applicazioni Applications

INOX

Inox Stainless

Metalli Metals

Acciaio Steel

130°

Extra short serie €

pcs.

cod.

cad/each

3 3,2 3,25 3,5 3,75 4 4,2 4,25 4,5 4,75 5 5,25 5,5 5,75 6 6,5 7 7,5 8 8,5 9 9,5 10

16 18 18 20 20 22 22 22 24 24 26 26 28 28 28 31 34 34 37 37 40 40 43

46 49 49 52 52 55 55 55 58 58 62 62 66 66 66 70 74 74 79 79 84 84 89

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5

011490300 011490320 011490325 011490350 011490375 011490400 011490420 011490425 011490450 011490475 011490500 011490525 011490550 011490575 011490600 011490650 011490700 011490750 011490800 011490850 011490900 011490950 011491000

2,187 2,532 2,781 2,781 3,065 3,065 3,262 3,496 3,496 3,719 3,719 4,059 5,053 5,251 5,251 5,475 6,615 7,596 9,371 9,811 11,424 12,519 15,123

Punte speciali per la foratura di lamiere e tubi in acciaio inox e lamiere metalliche in genere (acciaio, ferro, rame). Speciali per lattonieri, carpentieri, coperturisti, fabbri, installatori.

Emulsione Lubrificant

01051

Extra corta

DIN 1897

Super short twist drills for cutting stainless metal sheets. Special for journeymen’s, carpenters, locksmith’s, tinsmith’s.

HSS-CO 5%

W 27°

Confezione Packaging

HV 800÷860 AISI M35 SPLIT POINT DIN 1412 C

Super corta

NORMA KRINO

Super short serie

pcs.

cod.

3 3,25 3,5 3,75 4 4,25 4,5 5

16 19 19 19 20 20 23 23

35 40 40 40 40 40 42 45

10 10 10 10 10 10 10 10

010510300 010510325 010510350 010510375 010510400 010510425 010510450 010510500

<3 d

Punte speciali per la foratura di lamiere e tubi in acciaio inox e lamiere metalliche in genere (acciaio, ferro, rame). Speciali per lattonieri, carpentieri, coperturisti, fabbri, installatori. Super short twist drills for cutting stainless metal sheets. Special for journeymen’s, carpenters, locksmith’s, tinsmith’s.

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Emulsione Lubrificant

€ cad/each

1,484 1,484 1,484 2,111 2,231 2,425 2,805 3,108

PUNTE ELICOIDALI AL COBALTO 5%, ELICA CONTRAPPOSTA

Cobalt straight shank twist drills, double ended

01148 130°

W 27°

HV 800÷860 SPLIT POINT DIN 1412 C (Ø≥3 mm)

<3 d

Elica contrapposta

HSS-CO 5% Confezione Packaging

Double ended €

pcs.

cod.

cad/each

2 2,5 3 3,25 3,5 3,75 4 4,1 4,25 4,5 4,75 4,9 5 5,1 5,5 6

10 10 10 10 12 12 12 12 12 12 13 13 13 13 16 16

38 43 46 49 52 55 55 55 58 58 62 62 62 62 66 66

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

011480200 011480250 011480300 011480325 011480350 011480375 011480400 011480410 011480425 011480450 011480475 011480490 011480500 011480510 011480550 011480600

2,947 2,947 2,947 3,767 3,413 4,038 3,659 4,523 4,523 4,125 5,301 4,825 4,825 5,840 5,840 6,909

Applicazioni Applications

INOX

Inox Stainless

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

PUNTE ELICOIDALI CILINDRICHE AL COBALTO 5%, SERIE LUNGA Cobalt long straight shank twist drills

01152 130°

W 27°

HV 800÷860 AISI M35 SPLIT POINT DIN 1412 C

<8 d

Applicazioni Applications

INOX

Inox Stainless

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

HSS-CO 5%

Confezione Packaging

Serie lunga

DIN 340

Long serie

Ø h8

pcs.

cod.

1 1,5 1,75 2 2,25 2,5 2,75 3 3,25 3,5 3,75 4 4,25 4,5 4,75 5 5,25 5,5 5,75 6 6,25 6,5 6,75 7 7,25 7,5 7,75 8 8,25 8,5 8,75 9 9,25 9,5 9,75 10 10,25 10,5 10,75 11 11,25 11,5 11,75 11,8 12 12,25 12,5 12,75 13 13,5 14 14,5 15 15,5 16 16,5 17 17,5 18 18,5 19 19,5 20

33 45 53 56 59 62 66 66 69 73 73 78 78 82 82 87 87 91 91 91 97 97 97 102 102 102 109 109 109 109 115 115 115 115 121 121 121 121 128 128 128 128 134 134 134 134 134 134 134 140 140 144 144 149 149 154 154 158 158 162 162 166 166

56 70 80 85 90 95 100 100 106 112 112 119 119 126 126 132 132 139 139 139 148 148 148 156 156 156 165 165 165 165 175 175 175 175 184 184 184 184 195 195 195 195 205 205 205 205 205 205 205 214 214 220 220 227 227 235 235 241 241 247 247 254 254

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 1 1 1 1 1 1 1 1

011520100 011520150 011520175 011520200 011520225 011520250 011520275 011520300 011520325 011520350 011520375 011520400 011520425 011520450 011520475 011520500 011520525 011520550 011520575 011520600 011520625 011520650 011520675 011520700 011520725 011520750 011520775 011520800 011520825 011520850 011520875 011520900 011520925 011520950 011520975 011521000 011521025 011521050 011521075 011521100 011521125 011521150 011521175 011521180 011521200 011521225 011521250 011521275 011521300 011521350 011521400 011521450 011521500 011521550 011521600 011521650 011521700 011521750 011521800 011521850 011521900 011521950 011522000

€ cad/each

1,572 1,572 1,913 3,283 2,532 3,837 3,821 4,110 4,580 4,580 5,729 5,729 6,840 6,840 7,264 7,264 9,101 9,101 9,814 9,814 11,747 11,747 13,646 13,646 14,842 14,842 17,525 17,525 18,613 18,613 21,756 21,756 24,112 24,112 28,041 28,041 30,401 33,252 33,741 38,340 36,687 41,722 42,361 42,361 48,171 45,531 51,774 48,733 55,409 62,920 62,920 71,007 71,007 83,709 83,709 95,920 95,920 110,595 110,595 137,790 137,790 157,621 157,621

POLLICI INCHES

PUNTE ELICOIDALI IN POLLICI AL COBALTO 5%, ESECUZIONE INTERAMENTE RETTIFICATA, SERIE CORTA Cobalt twist drills ground from the solid in inches

01157 130°

W 27°

HV 800÷860 AISI M35 SPLIT POINT DIN 1412 C

<5 d

R ≤ 1200 N/mm2

HSS-CO 5%

Confezione Packaging

Serie corta - Pollici

ANSI B94

Short series - Inches

Ø inch

Ø mm

l inch

L inch

pcs.

cod.

cad/each

€

1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2

1,59 1,98 2,38 2,78 3,17 3,57 3,97 4,37 4,76 5,16 5,56 5,95 6,35 6,75 7,14 7,54 7,94 8,33 8,73 9,13 9,52 9,92 10,32 10,72 11,11 11,51 11,91 12,30 12,70

7/8 1” 1-1/4 1-1/2 1-5/8 1-3/4 2 2-1/8 2-5/16 2-7/16 2-1/2 2-5/8 2-3/4 2-7/8 2-15/16 3-1/16 3-3/16 3-5/16 3-7/16 3-1/2 3-5/8 3-3/4 3-7/8 3-15/16 4-1/16 4-3/16 4-5/16 4-7/16 4-1/2

1-7/8 2” 2-1/4 2-5/8 2-3/4 2-7/8 3-1/8 3-1/4 3-1/2 3-5/8 3-3/4 3-7/8 4” 4-1/8 4-1/4 4-3/8 4-1/2 4-5/8 4-3/4 4-7/8 5” 5-1/8 5-1/4 5-3/8 5-1/2 5-5/8 5-3/4 5-7/8 6”

10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

0115714 0115715 0115716 0115717 0115718 0115719 0115720 0115721 0115722 0115723 0115724 0115725 0115726 0115727 0115728 0115729 0115730 0115731 0115732 0115733 0115734 0115735 0115736 0115737 0115738 0115739 0115740 0115741 0115742

2,365 2,365 2,458 2,458 2,458 2,994 3,211 3,640 3,949 4,377 5,238 5,238 6,971 8,836 9,063 9,412 10,098 10,797 13,001 13,214 14,746 15,445 19,472 22,763 23,797 23,797 26,469 28,887 29,410

Applicazioni Applications

INOX

Inox Stainless

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

SPEEDMASTER

Taglio altamente professionale High quality cuts

Taglio altamente professionale con trapani portatili o stazionari in: acciai legati ed altamente legati, acciaio inox fino a R ≤ 900 N/mm2, ferro, alluminio, metalli. High quality cuts with portable or bench drilling machines into: alloy steel, high alloy steel, stainless steel up to R ≤ 900 N/mm2, iron, aluminium, metals.

3 pianetti antislittamento (Ø > 5 mm) 3 plats antirotation (Ø > 5 mm)

Piena trasmissione della potenza Full power transmission

Cave ampie e lisce Wide and smooth flutes

Facile estrazione dei trucioli Easy chip removal

Affilatura speciale Special Sharpening

Micropunta autocentrante: Facile centratura sul pezzo e agevole partenza del taglio. Micro self-centering tip: Easiness of spot-drilling and start cut.

Doppia coppia di taglienti con spoglia variabile: Massima capacità di taglio con grande durata del filo tagliente. Double couple of cutting edges with variable relief: Maximum cutting capacity, with high resistance of the cutting edges.

Coppia di rompitruciolo: Evita la formazione di taglienti di riporto. Double chip-breaker: Avoid the creation of built-up cutting edges.

PUNTE ELICOIDALI CILINDRICHE RETTIFICATE A DOPPIO CONOIDE

HSS-G fully ground twist drills “Speedmaster®”

130°

HSS-G

W 27°

Serie corta

DIN 338

Confezione Packaging

AISI M2 HV 820÷850 SPLIT POINT (Ø ≥ 2,5 mm)

<5 d

R ≤ 900 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Emulsione Lubrificant

Art. 01221 Self Disponibile su richiesta On demand

Short serie

Ground from the solid

Doppio conoide Double conoid

Ø h8

pcs.

cod.

cad/each

€

1 1,25 1,5 1,75 2 2,25 2,5 2,75 3 3,1 3,25 3,3 3,5 3,75 4 4,1 4,25 4,3 4,5 4,75 5 5,1 5,25 5,5 5,75 6 6,25 6,5 6,75 7 7,25 7,5 7,75 8 8,25 8,5 8,75 9 9,25 9,5 9,75 10 10,25 10,5 10,75 11 11,25 11,5 11,75 12 12,25 12,5 12,75 13

12 16 18 22 24 27 30 33 33 33 36 36 39 39 43 43 43 43 47 47 52 52 52 57 57 57 63 63 69 69 69 69 75 75 75 75 81 81 81 81 87 87 87 87 94 94 94 94 94 101 101 101 101 101

34 38 40 46 49 53 57 61 61 61 65 65 70 70 75 75 75 75 80 80 86 86 86 93 93 93 101 101 109 109 109 109 117 117 117 117 125 125 125 125 133 133 133 133 142 142 142 142 142 151 151 151 151 151

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

012200100 012200125 012200150 012200175 012200200 012200225 012200250 012200275 012200300 012200310 012200325 012200330 012200350 012200375 012200400 012200410 012200425 012200430 012200450 012200475 012200500 012200510 012200525 012200550 012200575 012200600 012200625 012200650 012200675 012200700 012200725 012200750 012200775 012200800 012200825 012200850 012200875 012200900 012200925 012200950 012200975 012201000 012201025 012201050 012201075 012201100 012201125 012201150 012201175 012201200 012201225 012201250 012201275 012201300

1,804 1,979 1,804 1,979 1,804 2,007 1,831 2,157 1,953 2,241 2,521 2,292 2,292 2,780 2,521 2,897 3,011 3,011 2,725 3,444 3,282 4,461 4,461 4,135 4,841 4,407 5,709 5,195 6,685 6,075 7,160 6,495 8,407 8,001 9,194 8,651 10,903 9,900 11,553 10,847 13,070 12,462 14,427 13,492 16,746 15,228 18,211 16,542 20,299 18,996 21,899 20,367 23,323 21,777

SPEEDMASTER

01220

STEP+

Punta tradizionale Traditional drill bit

PUNTA STEP+

Fori perfetti Perfect holes La speciale geometria della punta a gradino (ø ≥ 3 mm) permette di eseguire fori estremamente precisi nelle dimensioni e perfettamente circolari nella forma. The special geometry of the step drill bit (Ø ≥ 3 mm) permits making holes that are extremely precise in size and perfectly circular in shape.

30% più veloce 30% Faster La punta STEP+ risulta il 30% più veloce rispetto ad una punta elicoidale con affilatura tradizionale. The STEP+ drill bit is 30% faster than a traditionally sharpened helical drill bit

Elevata durata High durability La punta STEP+ garantisce un’elevata costanza di rendimento ed una prolungata vita utile anche in condizioni d’uso intensivo. The STEP+ drill bit guarantees high consistency of performance and prolonged tool life even under intensive use.

Pratica, anche su superfici tonde Practical, even on round surfaces La STEP+ infatti non «strappa» mai, il foro viene eseguito dolcemente senza generare eccessiva forza torcente. The STEP+ never “tears” and the hole is drilled smoothly without generating excessive torque.

Versatile Versatile STEP+ risulta estremamente pratica anche per allargare fori pre esistenti, e risulta efficace anche su svariati materiali solidi come plastica e legno. STEP+ is also extremely practical for enlarging preexisting holes, and is also effective on a variety of solid materials such as plastic and wood.

PUNTE ELICOIDALI CILINDRICHE CON GEOMETRIA A GRADINO

HSS-G fully ground twist drills whit step geometry

Ø≥3 mm

130°

W 27°

<5 d

R ≤ 900 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

HSS-G

Serie corta

DIN 338

Short serie

Ground from the solid

Confezione Packaging

n° gradini n° steps

pcs.

cod.

cad/each

1 1.5 2 2.5 3 3.2 3.5 4 4.2 4.5 4.8 5 5.2 5.5 6 6.5 7 7.5 8 8.5 9 9.5 10 10.5 11 11.5 12 12.5 13

12 18 24 30 33 36 39 43 43 47 52 52 52 57 57 63 69 69 75 75 81 81 87 87 94 94 101 101 101

34 40 49 57 61 65 70 75 75 80 86 86 86 93 93 101 109 109 117 117 125 125 133 133 142 142 151 151 151

1 1 1 1 2 2 2 2 2 3 3 3 4 4 5 5 5 6 6 7 7 8 8 8 8

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5

014010100 014010150 014010200 014010250 014010300 014010320 014010350 014010400 014010420 014010450 014010480 014010500 014010520 014010550 014010600 014010650 014010700 014010750 014010800 014010850 014010900 014010950 014011000 014011050 014011100 014011150 014011200 014011250 014011300

1,714 1,714 1,714 1,739 1,855 2,395 2,177 2,395 2,752 2,860 2,589 3,118 4,238 3,928 4,187 4,935 5,771 6,170 7,601 8,218 9,405 10,305 11,839 12,817 14,467 15,715 18,046 19,349 20,688

Metalli Metals

Alu

Alluminio Aluminum

Emulsione Lubrificant

€

D l L1 La speciale geometria della punta a gradino (ø ≥ 3 mm) permette di eseguire fori estremamente precisi nelle dimensioni e perfettamente circolari nella forma. Ideale per un utilizzo manuale in lavorazioni in cui è richiesta un’ottima precisione, in particolare su lamiere di ridotti spessori, profilati in alluminio, ecc.

Plastica Plastic

Legno Wood

STEP+

01401

PUNTE ELICOIDALI CILINDRICHE CON RIVESTIMENTO AL NITRURO DI TITANIO SUI TAGLIENTI E CON ANGOLO AL VERTICE DI 118° TiN coated twist drills

01320 118°

W 27°

HV 0,05 2500 AISI M2 SPLIT POINT DIN 1412 C (Ø≥2,5 mm)

<5 d

R ≤ 900 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

Rendimenti elevati e maggiore durata dei taglienti nella foratura degli acciai legati, nelle ghise e nei metalli in genere. High level of performances in cutting alloy steel, cast iron, metals up to R ≤ 900 N/mm2.

DIN 338 - 118° RIVESTITA SUI TAGLIENTI

TiN

HSS-G

Confezione Packaging

Titanium coated

Serie corta - 118° Short serie - 118°

Ø h8

pcs.

cod.

cad/each

€

2 2,1 2,2 2,25 2,3 2,4 2,5 2,6 2,7 2,75 2,8 2,9 3 3,1 3,2 3,25 3,3 3,4 3,5 3,6 3,7 3,75 3,8 3,9 4 4,1 4,2 4,25 4,3 4,4 4,5 4,6 4,7 4,75 4,8 4,9 5 5,1 5,2 5,25 5,3 5,4 5,5 5,6 5,7 5,75 5,8 5,9 6 6,1 6,2 6,25 6,3 6,4 6,5 6,6 6,7 6,75 6,8 6,9 7 7,1 7,2

24 24 27 27 27 30 30 30 33 33 33 33 33 36 36 36 36 39 39 39 39 39 43 43 43 43 43 43 47 47 47 47 47 47 52 52 52 52 52 52 52 57 57 57 57 57 57 57 57 63 63 63 63 63 63 63 63 69 69 69 69 69 69

49 49 53 53 53 57 57 57 61 61 61 61 61 65 65 65 65 70 70 70 70 70 75 75 75 75 75 75 80 80 80 80 80 80 86 86 86 86 86 86 86 93 93 93 93 93 93 93 93 101 101 101 101 101 101 101 101 109 109 109 109 109 109

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5

013200200 013200210 013200220 013200225 013200230 013200240 013200250 013200260 013200270 013200275 013200280 013200290 013200300 013200310 013200320 013200325 013200330 013200340 013200350 013200360 013200370 013200375 013200380 013200390 013200400 013200410 013200420 013200425 013200430 013200440 013200450 013200460 013200470 013200475 013200480 013200490 013200500 013200510 013200520 013200525 013200530 013200540 013200550 013200560 013200570 013200575 013200580 013200590 013200600 013200610 013200620 013200625 013200630 013200640 013200650 013200660 013200670 013200675 013200680 013200690 013200700 013200710 013200720

1,449 1,449 1,449 1,449 1,449 1,449 1,449 1,711 1,711 1,711 1,711 1,711 1,711 1,949 1,949 1,949 1,949 1,949 1,949 2,274 2,274 2,274 2,274 2,274 2,274 2,897 2,897 2,897 2,897 2,897 2,897 3,296 3,296 3,296 3,296 3,296 3,296 4,034 4,034 4,034 4,034 4,034 4,034 4,471 4,471 4,471 4,471 4,471 4,471 5,258 5,258 5,258 5,258 5,258 5,258 5,920 5,920 5,920 5,920 5,920 5,920 6,882 6,882

Serie corta - 118° Short serie - 118°

Ø h8

pcs.

cod.

cad/each

€

Ø h8

pcs.

cod.

cad/each

€

7,25 7,3 7,4 7,5 7,6 7,7 7,75 7,8 7,9 8 8,1 8,2 8,25 8,3 8,4 8,5 8,6 8,7 8,75 8,8 8,9 9 9,1 9,2 9,25 9,3 9,4 9,5 9,6 9,7 9,75 9,8 9,9 10 10,1

69 69 69 69 75 75 75 75 75 75 75 75 75 75 75 75 81 81 81 81 81 81 81 81 81 81 81 81 87 87 87 87 87 87 87

109 109 109 109 117 117 117 117 117 117 117 117 117 117 117 117 125 125 125 125 125 125 125 125 125 125 125 125 133 133 133 133 133 133 133

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

013200725 013200730 013200740 013200750 013200760 013200770 013200775 013200780 013200790 013200800 013200810 013200820 013200825 013200830 013200840 013200850 013200860 013200870 013200875 013200880 013200890 013200900 013200910 013200920 013200925 013200930 013200940 013200950 013200960 013200970 013200975 013200980 013200990 013201000 013201010

6,882 6,882 6,882 6,882 8,355 8,355 8,355 8,355 8,355 8,355 9,892 9,892 9,892 9,892 9,892 9,892 10,827 10,827 10,827 10,827 10,827 10,827 12,015 12,015 12,015 12,015 12,015 12,015 13,214 13,214 13,214 13,352 13,352 13,352 14,726

10,2 10,25 10,3 10,4 10,5 10,6 10,7 10,75 10,8 10,9 11 11,1 11,2 11,25 11,3 11,4 11,5 11,6 11,7 11,75 11,8 11,9 12 12,1 12,2 12,25 12,3 12,4 12,5 12,6 12,7 12,75 12,8 12,9 13

87 87 87 87 87 87 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 101 101 101 101 101 101 101 101 101 101 101 101 101 101

133 133 133 133 133 133 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 151 151 151 151 151 151 151 151 151 151 151 151 151 151

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

013201020 013201025 013201030 013201040 013201050 013201060 013201070 013201075 013201080 013201090 013201100 013201110 013201120 013201125 013201130 013201140 013201150 013201160 013201170 013201175 013201180 013201190 013201200 013201210 013201220 013201225 013201230 013201240 013201250 013201260 013201270 013201275 013201280 013201290 013201300

14,726 14,726 14,726 14,726 14,726 16,124 16,124 16,124 16,124 16,124 16,124 17,485 17,485 17,485 17,485 17,485 17,485 19,320 19,320 19,320 19,320 19,320 19,320 21,382 21,382 21,382 21,382 21,382 21,382 23,381 23,381 23,381 23,381 23,381 23,381

Caratteristiche del rivestimento TiN Features of TiN coating Il rivestimento monostrato TiN ha lo scopo di incrementare la resistenza a fenomeni di usura e ossidazione cui gli utensili sono sottoposti durante le lavorazioni di foratura: ha ottime caratteristiche di microdurezza (HV 0.05 2300), un basso coefficiente di attrito (0.4), una temperatura massima di esercizio pari a 500°C. Il rivestimento di pochi μm, depositato per via fisica mediante vapore (Physical Vapour Deposition), consente pertanto di aumentare la vita utile degli utensili da taglio, migliorando anche la finitura superficiale ed il conseguente scorrimento dei trucioli di lavorazione. TiN monolayer coating can increase both wear and oxidation resistance of every tool. It has high hardness (HV 0.05 2300), low friction coefficient (0.4), maximum working temperature 500°C. The coating thickness is very low (μm) and it’s produced by Physical Vapour Deposition. TiN coating increases the life cycle of the tool, also improving the surface finishing and the drilling chips removal.

PUNTE ELICOIDALI CILINDRICHE CON RIVESTIMENTO AL NITRURO DI TITANIO TiN coated twist drills

01160 130°

HSS-G

W 27°

TiN

Confezione Packaging

HV 0,05 2500 AISI M2 SPLIT POINT DIN 1412 C (Ø≥2,5 mm)

<5 d

R ≤ 900 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

Art. 01161 Self Disponibile su richiesta On demand

DIN 338

Serie corta

RETTIFICATA

Short serie

Titanium coated Ø h8

pcs.

cod.

cad/each

€

1 1,1 1,2 1,25 1,3 1,4 1,5 1,6 1,7 1,75 1,8 1,9 2 2,1 2,2 2,25 2,3 2,4 2,5 2,6 2,7 2,75 2,8 2,9 3 3,1 3,2 3,25 3,3 3,4 3,5 3,6 3,7 3,75 3,8 3,9 4 4,1 4,2 4,25 4,3 4,4 4,5 4,6 4,7 4,75 4,8 4,9 5 5,1 5,2 5,25 5,3 5,4 5,5 5,6 5,7 5,75 5,8 5,9 6 6,1 6,2

12 14 16 16 16 18 18 20 20 22 22 22 24 24 27 27 27 30 30 30 33 33 33 33 33 36 36 36 36 39 39 39 39 39 43 43 43 43 43 43 47 47 47 47 47 47 52 52 52 52 52 52 52 57 57 57 57 57 57 57 57 63 63

34 36 38 38 38 40 40 43 43 46 46 46 49 49 53 53 53 57 57 57 61 61 61 61 61 65 65 65 65 70 70 70 70 70 75 75 75 75 75 75 80 80 80 80 80 80 86 86 86 86 86 86 86 93 93 93 93 93 93 93 93 101 101

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

011600100 011600110 011600120 011600125 011600130 011600140 011600150 011600160 011600170 011600175 011600180 011600190 011600200 011600210 011600220 011600225 011600230 011600240 011600250 011600260 011600270 011600275 011600280 011600290 011600300 011600310 011600320 011600325 011600330 011600340 011600350 011600360 011600370 011600375 011600380 011600390 011600400 011600410 011600420 011600425 011600430 011600440 011600450 011600460 011600470 011600475 011600480 011600490 011600500 011600510 011600520 011600525 011600530 011600540 011600550 011600560 011600570 011600575 011600580 011600590 011600600 011600610 011600620

1,383 1,383 1,383 1,250 1,250 1,250 1,168 1,558 1,558 1,410 1,463 1,463 1,342 1,558 1,558 1,558 1,558 1,558 1,410 1,907 1,907 1,907 1,907 1,907 1,733 2,069 2,069 2,069 2,069 2,069 1,880 2,176 2,176 2,176 2,176 2,176 1,973 2,606 2,606 2,606 2,606 2,606 2,365 2,832 2,832 2,832 2,832 2,832 2,578 3,451 3,451 3,451 3,451 3,451 3,144 3,788 3,788 3,788 3,788 3,788 3,438 4,244 4,244

Serie corta Short serie

Ø h8

pcs.

cod.

cad/each

€

6,25 6,3 6,4 6,5 6,6 6,7 6,75 6,8 6,9 7 7,1 7,2 7,25 7,3 7,4 7,5 7,6 7,7 7,75 7,8 7,9 8 8,1 8,2 8,25 8,3 8,4 8,5 8,6 8,7 8,75 8,8 8,9 9 9,1 9,2 9,25 9,3 9,4 9,5 9,6 9,7 9,75 9,8 9,9 10 10,25

63 63 63 63 63 63 69 69 69 69 69 69 69 69 69 69 75 75 75 75 75 75 75 75 75 75 75 75 81 81 81 81 81 81 81 81 81 81 81 81 87 87 87 87 87 87 87

101 101 101 101 101 101 109 109 109 109 109 109 109 109 109 109 117 117 117 117 117 117 117 117 117 117 117 117 125 125 125 125 125 125 125 125 125 125 125 125 133 133 133 133 133 133 133

10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

011600625 011600630 011600640 011600650 011600660 011600670 011600675 011600680 011600690 011600700 011600710 011600720 011600725 011600730 011600740 011600750 011600760 011600770 011600775 011600780 011600790 011600800 011600810 011600820 011600825 011600830 011600840 011600850 011600860 011600870 011600875 011600880 011600890 011600900 011600910 011600920 011600925 011600930 011600940 011600950 011600960 011600970 011600975 011600980 011600990 011601000 011601025

4,244 4,244 4,244 3,854 4,728 4,728 4,728 4,728 4,728 4,284 5,856 5,856 5,856 5,856 5,856 5,319 6,810 6,810 6,810 6,810 6,810 6,190 8,273 8,273 8,273 8,273 8,273 7,507 8,971 8,971 8,971 8,971 8,971 8,165 10,139 10,139 10,139 10,139 10,139 9,224 10,555 10,555 10,555 10,555 10,555 9,602 11,805

Ø h8

pcs.

cod.

cad/each

€

10,5 10,75 11 11,25 11,5 11,75 12 12,25 12,5 12,75 13 13,5 14 14,5 15 15,5 16 16,5 17 17,5 18 18,5 19 19,5 20

87 94 94 94 94 94 101 101 101 101 101 108 108 114 114 120 120 125 125 130 130 135 135 140 140

133 142 142 142 142 142 151 151 151 151 151 160 160 169 169 178 178 184 184 191 191 198 198 205 205

5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 1 1 1 1 1 1 1 1

011601050 011601075 011601100 011601125 011601150 011601175 011601200 011601225 011601250 011601275 011601300 011601350 011601400 011601450 011601500 011601550 011601600 011601650 011601700 011601750 011601800 011601850 011601900 011601950 011602000

10,731 12,758 11,590 13,886 12,625 14,652 15,043 16,047 16,384 17,847 17,325 25,969 27,985 31,020 33,357 36,860 39,141 42,608 45,222 49,133 51,962 56,186 59,339 61,247 64,079

PUNTE ELICOIDALI CILINDRICHE CON CODOLO RIDOTTO RIVESTITE AL NITRURO DI TITANIO Reduced shank TiN coated twist drills

01163 130°

HSS-G

TiN

DIN 338

Confezione

W 27°

Packaging

HV 0,05 2500 AISI M2 SPLIT POINT DIN 1412 C (Ø≥2,5 mm)

<5 d

d d=10 mm

Applicazioni Applications

INOX

Inox Stainless

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

01164 130°

HSS-G

d d=13 mm

Applicazioni Applications

DIN 338

Packaging

<5 d

Inox Stainless

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

Reduced shank - 10mm

Ø h8

pcs.

cod.

cad/each

10,25 10,5 10,75 11 11,25 11,5 11,75 12 12,25 12,5 12,75 13 13,5 14 14,5 15 15,5 16 16,5 17 17,5 18 18,5 19 19,5 20

87 87 94 94 94 94 94 101 101 101 101 101 108 108 114 114 120 120 125 125 130 130 135 135 140 140

133 133 142 142 142 142 142 151 151 151 151 151 160 160 169 169 178 178 184 184 191 191 198 198 205 205

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 1 1 1 1 1 1 1 1

011631025 011631050 011631075 011631100 011631125 011631150 011631175 011631200 011631225 011631250 011631275 011631300 011631350 011631400 011631450 011631500 011631550 011631600 011631650 011631700 011631750 011631800 011631850 011631900 011631950 011632000

14,411 13,309 15,362 14,168 16,477 15,188 17,176 17,457 19,742 20,279 20,817 20,413 32,579 34,836 38,233 40,852 44,774 47,324 51,206 54,135 58,512 61,667 66,409 69,941 72,074 75,245

€

Codolo ridotto - 13mm

RETTIFICATA

Reduced shank - 13mm

Titanium coated Confezione

W 27°

HV 0,05 2500 AISI M2 SPLIT POINT DIN 1412 C (Ø≥2,5 mm)

INOX

TiN

Codolo ridotto - 10mm

RETTIFICATA

Titanium coated

Ø h8

pcs.

cod.

cad/each

€

13,5 14 14,5 15 15,5 16 16,5 17 17,5 18 18,5 19 19,5 20

108 108 114 114 120 120 125 125 130 130 135 135 140 140

160 160 169 169 178 178 184 184 191 191 198 198 205 205

13 13 13 13 13 13 13 13 13 13 13 13 13 13

3 3 3 3 3 3 1 1 1 1 1 1 1 1

011641350 011641400 011641450 011641500 011641550 011641600 011641650 011641700 011641750 011641800 011641850 011641900 011641950 011642000

32,579 34,836 38,233 40,852 44,774 47,324 51,206 54,135 58,512 61,667 66,409 69,941 72,074 75,245

PUNTE ELICOIDALI CILINDRICHE RIVESTITE AL NITRURO DI TITANIO, SERIE EXTRA CORTA HSS-G TiN coated twist drills, stub serie

01166 130°

W 27°

HV 0,05 2500 SPLIT POINT DIN 1412C (Ø≥3 mm)

DIN 1897

TiN

HSS-G

Confezione Packaging

Serie extra corta

RETTIFICATA

Extra short serie

Titanium coated Ø h8

pcs.

cod.

cad/each

€

3 3,25 3,50 3,75 4 4,50 5 5,5 6 6,5

16 18 20 20 22 24 26 28 28 28

46 49 52 52 55 58 62 66 66 66

10 10 10 10 10 10 10 10 10 10

011660300 011660325 011660350 011660375 011660400 011660450 011660500 011660550 011660600 011660650

1,733 2,069 1,880 2,176 1,973 2,365 2,578 3,144 3,339 5,680

<3 d

Applicazioni Applications

INOX

Inox Stainless

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

PUNTE ELICOIDALI CILINDRICHE RIVESTITE AL NITRURO DI TITANIO, SERIE LUNGA HSS-G TiN coated twist drills, long serie

01168 130°

W 27°

HV 0,05 2500 SPLIT POINT DIN 1412C (Ø≥3 mm)

<8 d

R ≤ 900 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

HSS-G Confezione Packaging

TiN

DIN 340

Serie lunga

RETTIFICATA

Long serie

Ø h8

pcs.

cod.

cad/each

€

3 3,25 3,5 3,75 4 4,25 4,5 4,75 5 5,25 5,5 5,75 6 6,5 7 7,5 8 8,5 9 9,5 10

66 69 73 73 78 78 82 82 87 87 91 91 91 97 102 102 109 109 115 115 121

100 106 112 112 119 119 126 126 132 132 139 139 139 148 156 156 165 165 175 175 184

10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5

011680300 011680325 011680350 011680375 011680400 011680425 011680450 011680475 011680500 011680525 011680550 011680575 011680600 011680650 011680700 011680750 011680800 011680850 011680900 011680950 011681000

3,303 3,479 3,479 3,867 3,867 4,445 4,445 5,009 5,009 5,856 5,856 6,447 6,447 6,782 8,729 10,474 12,758 14,948 16,384 17,996 20,951

POLLICI INCHES

PUNTE ELICOIDALI CILINDRICHE RIVESTITE AL NITRURO DI TITANIO, SERIE CORTA, IN POLLICI TiN coated twist drills

01162 130°

W 27°

HV 0,05 2500 SPLIT POINT DIN 1412 C

<5 d

TiN

HSS-G

Confezione Packaging

Serie corta - Pollici

ANSI B94 RETTIFICATA

Short serie - Inches

Ground from the solid Ø inch

Ø mm

l inch

L inch

pcs.

cod.

cad/each

€

1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2

1,59 1,98 2,38 2,78 3,17 3,57 3,97 4,37 4,76 5,16 5,56 5,95 6,35 6,75 7,14 7,54 7,94 8,33 8,73 9,13 9,52 9,92 10,32 10,72 11,11 11,51 11,91 12,30 12,70

7/8 1” 1-1/4 1-1/2 1-5/8 1-3/4 2” 2-1/8 2-5/16 2-7/16 2-1/2 2-5/8 2-3/4 2-7/8 2-15/16 3-1/16 3-3/16 3-5/16 3-7/16 3-1/2 3-5/8 3-3/4 3-7/8 3-15/16 4-1/16 4-3/16 4-5/16 4-7/16 4-1/2

1-7/8 2” 2-1/4 2-5/8 2-3/4 2-7/8 3-1/8 3-1/4 3-1/2 3-5/8 3-3/4 3-7/8 4” 4-1/8 4-1/4 4-3/8 4-1/2 4-5/8 4-3/4 4-7/8 5” 5-1/8 5-1/4 5-3/8 5-1/2 5-5/8 5-3/4 5-7/8 6”

10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

0116214 0116215 0116216 0116217 0116218 0116219 0116220 0116221 0116222 0116223 0116224 0116225 0116226 0116227 0116228 0116229 0116230 0116231 0116232 0116233 0116234 0116235 0116236 0116237 0116238 0116239 0116240 0116241 0116242

1,088 1,196 1,437 1,786 1,894 2,109 2,242 2,445 2,753 3,183 3,504 3,693 3,949 4,434 5,117 5,452 5,936 8,030 8,406 8,944 9,158 9,470 10,192 10,381 11,978 12,355 12,933 13,940 15,430

R ≤ 900 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Rendimenti elevati e maggiore durata dei taglienti nella foratura degli acciai legati, nelle ghise e nei metalli in genere con R ≤ 900 N/mm2. High level of performances in cutting alloy steel, cast iron, metals up to R ≤ 900 N/mm2.

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

PUNTE ELICOIDALI CILINDRICHE, ESECUZIONE INTERAMENTE RETTIFICATA, “DUAL PERFORMER®”

Dual Performer

Fully ground straight shank twist drills “Dual Performer®”

DUAL PERFORMER

01201 130°

W 27°

HSS-G

DIN 338

Confezione Packaging

HV 0,05 2500 SPLIT POINT DIN 1412C (Ø≥3 mm)

<5 d

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

Taglio dei materiali con R ≤ 850 N/mm2 quali acciai legati, ghise, tutti i metalli in genere, la grafite. Precisione di foratura e costanza di rendimenti elevati. High precision and high performances in cutting alloy steel up to R ≤ 850 N/mm2.

Serie corta

RETTIFICATA

Short serie

Ground from the solid Ø h8

pcs.

cod.

cad/each

€

3 4 5 5 6 7 7 8 9 9 10 10 11 11 12 14 16 16 16 18 18 20 20 22 22 22 24 24 27 27 27 30 30 30 33 33 33 33 33 36 36 36 36 39 39 39 39 39 43 43 43 43 43 43 47 47 47 47 47 47 52 52 52

19 19 20 20 22 24 24 26 28 28 30 30 32 32 34 36 38 38 38 40 40 43 43 46 46 46 49 49 53 53 53 57 57 57 61 61 61 61 61 65 65 65 65 70 70 70 70 70 75 75 75 75 75 75 80 80 80 80 80 80 86 86 86

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

012010030 012010035 012010040 012010045 012010050 012010055 012010060 012010065 012010070 012010075 012010080 012010085 012010090 012010095 012010100 012010110 012010120 012010125 012010130 012010140 012010150 012010160 012010170 012010175 012010180 012010190 012010200 012010210 012010220 012010225 012010230 012010240 012010250 012010260 012010270 012010275 012010280 012010290 012010300 012010310 012010320 012010325 012010330 012010340 012010350 012010360 012010370 012010375 012010380 012010390 012010400 012010410 012010420 012010425 012010430 012010440 012010450 012010460 012010470 012010475 012010480 012010490 012010500

2,959 2,959 2,959 2,959 2,959 2,959 2,959 2,959 2,959 2,959 2,959 2,959 2,959 2,959 1,652 1,746 1,746 1,746 1,746 1,746 1,531 1,424 1,424 1,424 1,424 1,424 1,262 1,520 1,520 1,520 1,520 1,520 1,383 1,786 1,786 1,786 1,786 1,786 1,624 2,015 2,015 2,015 2,015 2,015 1,827 2,096 2,096 2,096 2,096 2,096 1,921 2,458 2,458 2,458 2,458 2,458 2,336 2,606 2,606 2,606 2,606 2,606 2,445

Dual Performer Serie corta Ø h8

pcs.

cod.

52 52 52 52 57 57 57 57 57 57 57 57 63 63 63 63 63 63 63 63 69 69 69 69 69 69 69 69 69 69 75 75 75 75 75 75 75 75 75 75 75 75 81 81 81 81 81 81 81 81 81 81 81 81 87 87 87 87 87 87 87 87 94

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

012010510 012010520 012010525 012010530 012010540 012010550 012010560 012010570 012010575 012010580 012010590 012010600 012010610 012010620 012010625 012010630 012010640 012010650 012010660 012010670 012010675 012010680 012010690 012010700 012010710 012010720 012010725 012010730 012010740 012010750 012010760 012010770 012010775 012010780 012010790 012010800 012010810 012010820 012010825 012010830 012010840 012010850 012010860 012010870 012010875 012010880 012010890 012010900 012010910 012010920 012010925 012010930 012010940 012010950 012010960 012010970 012010975 012010980 012010990 012011000 012011025 012011050 012011075

€ cad/each

3,332 3,332 3,332 3,332 3,332 3,196 3,693 3,693 3,693 3,693 3,693 3,491 4,607 4,607 4,607 4,607 4,607 4,244 5,359 5,359 5,359 5,359 5,359 4,968 5,881 5,881 5,881 5,881 5,881 5,264 6,621 6,621 6,621 6,621 6,621 6,246 8,514 8,514 8,514 8,514 8,514 8,111 8,717 8,717 8,717 8,717 8,717 8,313 9,750 9,750 9,750 9,750 9,750 9,280 10,018 10,018 10,018 10,018 10,018 9,548 12,891 11,281 15,510

Ø h8

pcs.

cod.

11 11,25 11,5 11,75 12 12,25 12,5 12,75 13 13,25 13,5 13,75 14 14,25 14,5 14,75 15 15,25 15,5 15,75 16 16,5 17 17,5 18 18,5 19 19,5 20

94 94 94 94 101 101 101 101 101 108 108 108 108 114 114 114 114 120 120 120 120 125 125 130 130 135 135 140 140

142 142 142 142 151 151 151 151 151 160 160 160 160 169 169 169 169 178 178 178 178 184 184 191 191 198 198 205 205

5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1

012011100 012011125 012011150 012011175 012011200 012011225 012011250 012011275 012011300 012011325 012011350 012011375 012011400 012011425 012011450 012011475 012011500 012011525 012011550 012011575 012011600 012011650 012011700 012011750 012011800 012011850 012011900 012011950 012012000

€ cad/each

13,523 16,491 14,423 17,941 15,550 19,540 17,002 22,131 17,941 27,168 24,670 27,987 25,449 31,963 29,034 37,521 34,111 41,066 37,321 42,545 38,665 40,006 41,966 43,981 46,748 50,884 52,550 55,047 57,679

DUAL PERFORMER

Short serie

PUNTE ELICOIDALI CILINDRICHE RETTIFICATE CON CODOLO RIDOTTO “DUAL PERFORMER®”

Dual Performer

Fully ground straight shank twist drills “Dual Performer®”

DUAL PERFORMER

01203

HSS-G

DIN 338

Confezione Packaging <5 d

d d=10 mm

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

01209

HSS-G

DIN 338

Packaging

d d=13 mm R ≤ 850 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

Reduced shank - 10mm

Ø h8

pcs.

cod.

cad/each

10,25 10,5 10,75 11 11,25 11,5 11,75 12 12,25 12,5 12,75 13 13,25 13,5 13,75 14 14,25 14,5 14,75 15 15,25 15,5 15,75 16 16,5 17 17,5 18 18,5 19 19,5 20

87 87 94 94 94 94 94 101 101 101 101 101 108 108 108 108 114 114 114 114 120 120 120 120 125 125 130 130 135 135 140 140

133 133 142 142 142 142 142 151 151 151 151 151 160 160 160 160 169 169 169 169 178 178 178 178 184 184 191 191 198 198 205 205

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1

012031025 012031050 012031075 012031100 012031125 012031150 012031175 012031200 012031225 012031250 012031275 012031300 012031325 012031350 012031375 012031400 012031425 012031450 012031475 012031500 012031525 012031550 012031575 012031600 012031650 012031700 012031750 012031800 012031850 012031900 012031950 012032000

15,483 13,858 18,089 16,088 19,070 17,014 20,506 18,142 22,104 19,553 24,722 20,506 31,224 28,390 32,203 29,263 36,729 33,398 43,150 39,227 47,218 42,921 48,923 44,465 45,996 48,253 50,588 53,758 58,512 60,432 63,319 66,341

€

Codolo ridotto - 13mm

RETTIFICATA

Reduced shank - 13mm

Ground from the solid

Confezione <5 d

Codolo ridotto - 10mm

RETTIFICATA

Ground from the solid

Ø h8

pcs.

cod.

13,25 13,5 13,75 14 14,25 14,5 14,75 15 15,25 15,5 15,75 16 16,5 17 17,5 18 18,5 19 19,5 20

108 108 108 108 114 114 114 114 120 120 120 120 125 125 130 130 135 135 140 140

160 160 160 160 169 169 169 169 178 178 178 178 184 184 191 191 198 198 205 205

13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13

3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1

012091325 012091350 012091375 012091400 012091425 012091450 012091475 012091500 012091525 012091550 012091575 012091600 012091650 012091700 012091750 012091800 012091850 012091900 012091950 012092000

€ cad/each

31,224 28,390 32,203 29,263 36,729 33,398 43,150 39,227 47,218 42,921 48,923 44,465 45,996 48,253 50,588 53,758 58,512 60,432 63,319 66,341

PUNTE ELICOIDALI CILINDRICHE RETTIFICATE, SERIE EXTRA CORTA E LUNGA “DUAL PERFORMER®”

Dual Performer

Straight shank twist drills, stub serie “Dual Performer®”

130°

DIN 1897

HSS-G

Confezione

W 27°

Serie extra corta

RETTIFICATA

Extra short serie

Ground from the solid

Packaging

Ø h8 3 3,25 3,5 3,75

HV 820 SPLIT POINT DIN 1412C

4 4,25 4,5 4,75 5 5,25

<3 d

5,5 5,75 6

€

pcs.

cod.

cad/each

16 18 20 20 22 22 24 24 26 26 28 28 28

46 49 52 52 55 55 58 58 62 62 66 66 66

10 10 10 10 10 10 10 10 10 10 10 10 10

012070300 012070325 012070350 012070375 012070400 012070425 012070450 012070475 012070500 012070525 012070550 012070575 012070600

1,840 1,934 1,934 1,934 1,934 2,445 2,445 2,592 2,592 3,237 3,237 3,572 3,572

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

01208 130°

W 27°

DIN 340

HSS-G

Serie lunga

RETTIFICATA

Long serie

Ground from the solid

Confezione Packaging

HV 820 SPLIT POINT DIN 1412C

<8 d

R ≤ 850 N/mm2

Ø h8

pcs.

cod.

cad/each

€

3 3,25 3,5 3,75 4 4,25 4,5 4,75 5 5,25 5,5 5,75 6 6,5 7 7,5 8 8,5 9 9,5 10

66 69 73 73 78 78 82 82 87 87 91 91 91 97 102 102 109 109 115 115 121

100 106 112 112 119 119 126 126 132 132 139 139 139 148 156 156 165 165 175 175 184

10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5

012080300 012080325 012080350 012080375 012080400 012080425 012080450 012080475 012080500 012080525 012080550 012080575 012080600 012080650 012080700 012080750 012080800 012080850 012080900 012080950 012081000

3,559 3,707 3,707 3,707 3,707 4,713 4,713 5,089 5,089 6,231 6,231 6,875 6,875 8,514 9,333 10,139 12,758 16,371 16,371 18,292 20,116

Applicazioni Applications

INOX

Inox Stainless

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

DUAL PERFORMER

01207

PUNTE ELICOIDALI CILINDRICHE, ESECUZIONE INTERAMENTE RETTIFICATA, SERIE CORTA Fully ground straight shank twist drills

130°

W 27°

DIN 338

HSS-G

Confezione Packaging

HV 820 AISI M2 SPLIT POINT DIN 1412C (Ø≥2,5)

<5 d

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Emulsione Lubrificant

Taglio dei materiali con R ≤ 800 N/mm2 quali acciai legati, ghise, tutti i metalli in genere, la grafite. Precisione di foratura e costanza di rendimenti elevati. High precision and high performances in cutting alloy steel up to R ≤ 800 N/mm2.

Serie corta

RETTIFICATA

Short serie

Ground from the solid

MICRO DRILLS

01060

Ø h8

L pcs.

0,2 0,21 0,22 0,23 0,24 0,25 0,26 0,27 0,28 0,29 0,3 0,35 0,4 0,45 0,5 0,55 0,6 0,65 0,7 0,75 0,8 0,85 0,9 0,95 1 1,1 1,2 1,25 1,3 1,4 1,5 1,6 1,7 1,75 1,8 1,9 2 2,1 2,2 2,25 2,3 2,4 2,5 2,6 2,7 2,75 2,8 2,9 3 3,1 3,2 3,25 3,3 3,4 3,5 3,6 3,7 3,75 3,8 3,9 4 4,1 4,2

2,5 2,5 2,5 2,5 2,5 3 3 3 3 3 3 4 5 5 6 7 7 8 9 9 10 10 11 11 12 14 16 16 16 18 18 20 20 22 22 22 24 24 27 27 27 30 30 30 33 33 33 33 33 36 36 36 36 39 39 39 39 39 43 43 43 43 43

19 19 19 19 19 19 19 19 19 19 19 19 20 20 22 24 24 26 28 28 30 30 32 32 34 36 38 38 38 40 40 43 43 46 46 46 49 49 53 53 53 57 57 57 61 61 61 61 61 65 65 65 65 70 70 70 70 70 75 75 75 75 75

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

cod.

cad/each

€

Ø h8

pcs.

cod.

cad/each

€

010600020 010600021 010600022 010600023 010600024 010600025 010600026 010600027 010600028 010600029 010600030 010600035 010600040 010600045 010600050 010600055 010600060 010600065 010600070 010600075 010600080 010600085 010600090 010600095 010600100 010600110 010600120 010600125 010600130 010600140 010600150 010600160 010600170 010600175 010600180 010600190 010600200 010600210 010600220 010600225 010600230 010600240 010600250 010600260 010600270 010600275 010600280 010600290 010600300 010600310 010600320 010600325 010600330 010600340 010600350 010600360 010600370 010600375 010600380 010600390 010600400 010600410 010600420

2,871 2,871 2,871 2,871 2,871 2,871 2,871 2,871 2,871 2,871 2,871 2,605 2,471 2,471 2,126 2,471 1,952 2,126 1,820 1,820 1,820 1,820 1,700 1,820 1,382 1,448 1,448 1,448 1,448 1,448 1,249 1,182 1,182 1,182 1,182 1,182 1,036 1,249 1,249 1,249 1,249 1,249 1,144 1,436 1,436 1,436 1,436 1,436 1,301 1,541 1,541 1,541 1,541 1,541 1,448 1,688 1,688 1,688 1,688 1,688 1,581 2,088 2,088

4,25 4,3 4,4 4,5 4,6 4,7 4,75 4,8 4,9 5 5,1 5,2 5,25 5,3 5,4 5,5 5,6 5,7 5,75 5,8 5,9 6 6,1 6,2 6,25 6,3 6,4 6,5 6,6 6,7 6,75 6,8 6,9 7 7,1 7,2 7,25 7,3 7,4 7,5 7,6 7,7 7,75 7,8 7,9 8 8,1 8,2 8,25 8,3 8,4 8,5 8,6 8,7 8,75 8,8 8,9 9 9,1 9,2 9,25 9,3 9,4

43 47 47 47 47 47 47 52 52 52 52 52 52 52 57 57 57 57 57 57 57 57 63 63 63 63 63 63 63 63 69 69 69 69 69 69 69 69 69 69 75 75 75 75 75 75 75 75 75 75 75 75 81 81 81 81 81 81 81 81 81 81 81

75 80 80 80 80 80 80 86 86 86 86 86 86 86 93 93 93 93 93 93 93 93 101 101 101 101 101 101 101 101 109 109 109 109 109 109 109 109 109 109 117 117 117 117 117 117 117 117 117 117 117 117 125 125 125 125 125 125 125 125 125 125 125

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

010600425 010600430 010600440 010600450 010600460 010600470 010600475 010600480 010600490 010600500 010600510 010600520 010600525 010600530 010600540 010600550 010600560 010600570 010600575 010600580 010600590 010600600 010600610 010600620 010600625 010600630 010600640 010600650 010600660 010600670 010600675 010600680 010600690 010600700 010600710 010600720 010600725 010600730 010600740 010600750 010600760 010600770 010600775 010600780 010600790 010600800 010600810 010600820 010600825 010600830 010600840 010600850 010600860 010600870 010600875 010600880 010600890 010600900 010600910 010600920 010600925 010600930 010600940

2,088 2,088 2,088 1,900 2,139 2,139 2,139 2,139 2,139 1,968 2,737 2,737 2,737 2,737 2,737 2,631 3,043 3,043 3,043 3,043 3,043 2,737 3,800 3,800 3,800 3,800 3,800 3,507 4,426 4,426 4,426 4,426 4,426 4,094 4,864 4,864 4,864 4,864 4,864 4,332 5,461 5,461 5,461 5,461 5,461 5,156 6,711 6,711 6,711 6,711 6,711 6,366 6,962 6,962 6,962 6,962 6,962 6,672 7,881 7,881 7,881 7,881 7,881

Serie corta Short serie

Ø h8

pcs.

cod.

9,5 9,6 9,7 9,75 9,8 9,9 10 10,1 10,2 10,25 10,3 10,4 10,5 10,6 10,7 10,75 10,8 10,9 11 11,1 11,2 11,25 11,3 11,4 11,5 11,6 11,7 11,75 11,8 11,9 12 12,1 12,2 12,25 12,3 12,4 12,5 12,6 12,7 12,75 12,8 12,9 13 13,1 13,2 13,25 13,3 13,4 13,5 13,6 13,7 13,75 13,8 13,9 14 14,1 14,2 14,25 14,3 14,4 14,5 14,6 14,7

81 87 87 87 87 87 87 87 87 87 87 87 87 87 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 108 108 108 108 108 108 108 108 108 108 108 114 114 114 114 114 114 114

125 133 133 133 133 133 133 133 133 133 133 133 133 133 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 151 151 151 151 151 151 151 151 151 151 151 151 151 151 151 151 160 160 160 160 160 160 160 160 160 160 160 169 169 169 169 169 169 169

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3

010600950 010600960 010600970 010600975 010600980 010600990 010601000 010601010 010601020 010601025 010601030 010601040 010601050 010601060 010601070 010601075 010601080 010601090 010601100 010601110 010601120 010601125 010601130 010601140 010601150 010601160 010601170 010601175 010601180 010601190 010601200 010601210 010601220 010601225 010601230 010601240 010601250 010601260 010601270 010601275 010601280 010601290 010601300 010601310 010601320 010601325 010601330 010601340 010601350 010601360 010601370 010601375 010601380 010601390 010601400 010601410 010601420 010601425 010601430 010601440 010601450 010601460 010601470

€ cad/each

7,175 8,346 8,346 8,346 8,346 8,346 7,508 10,670 10,670 10,670 10,670 10,670 9,314 12,785 12,785 12,785 12,785 12,785 11,150 13,580 13,580 13,580 13,580 13,580 11,894 14,816 14,816 14,816 14,816 14,816 12,836 16,145 16,145 16,145 16,145 16,145 14,004 18,258 18,258 18,258 18,258 18,258 15,109 21,408 21,408 21,408 21,408 21,408 19,228 21,408 21,408 21,408 21,408 21,408 19,759 25,702 25,702 25,702 25,702 25,702 21,914 25,702 25,702

Ø h8

pcs.

cod.

14,75 14,8 14,9 15 15,1 15,2 15,25 15,3 15,4 15,5 15,6 15,7 15,75 15,8 15,9 16 16,25 16,5 16,75 17 17,25 17,5 17,75 18 18,25 18,5 18,75 19 19,25 19,5 19,75 20

114 114 114 114 120 120 120 120 120 120 120 120 120 120 120 120 125 125 125 125 130 130 130 130 135 135 135 135 140 140 140 140

169 169 169 169 178 178 178 178 178 178 178 178 178 178 178 178 184 184 184 184 191 191 191 191 198 198 198 198 205 205 205 205

3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

010601475 010601480 010601490 010601500 010601510 010601520 010601525 010601530 010601540 010601550 010601560 010601570 010601575 010601580 010601590 010601600 010601625 010601650 010601675 010601700 010601725 010601750 010601775 010601800 010601825 010601850 010601875 010601900 010601925 010601950 010601975 010602000

€ cad/each

25,702 25,702 25,702 23,415 29,262 29,262 29,262 29,262 29,262 27,480 29,262 29,262 29,262 29,262 29,262 29,037 29,262 29,262 31,096 31,096 31,096 32,797 32,797 35,335 35,335 38,948 38,948 40,369 43,542 45,581 45,581 45,581

PUNTE ELICOIDALI CILINDRICHE CON CODOLO RIDOTTO, INTERAMENTE RETTIFICATE Reduced shank twist drills

01062

HSS-G

DIN 338

Confezione Packaging

<5 d

d d=10 mm

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Emulsione Lubrificant

Codolo ridotto - 10mm

RETTIFICATA

Reduced shank - 10mm

Ground from the solid Ø h8

pcs.

cod.

10,25 10,5 10,75 11 11,25 11,5 11,75 12 12,25 12,5 12,75 13 13,25 13,5 13,75 14 14,25 14,5 14,75 15 15,25 15,5 15,75 16 16,5 17 17,5 18 18,5 19 19,5 20

87 87 94 94 94 94 94 101 101 101 101 101 108 108 108 108 114 114 114 114 120 120 120 120 125 125 130 130 135 135 140 140

133 133 142 142 142 142 142 151 151 151 151 151 160 160 160 160 169 169 169 169 178 178 178 178 184 184 191 191 198 198 205 205

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1

010621025 010621050 010621075 010621100 010621125 010621150 010621175 010621200 010621225 010621250 010621275 010621300 010621325 010621350 010621375 010621400 010621425 010621450 010621475 010621500 010621525 010621550 010621575 010621600 010621650 010621700 010621750 010621800 010621850 010621900 010621950 010622000

€ cad/each

13,688 12,332 15,800 14,165 16,597 14,911 17,834 15,854 19,163 17,023 21,276 18,125 24,851 22,682 24,851 23,214 29,155 25,368 29,155 26,870 35,468 30,936 35,468 32,477 32,716 34,537 36,251 38,776 42,403 43,824 49,020 49,020

PUNTE ELICOIDALI CILINDRICHE CON CODOLO RIDOTTO, INTERAMENTE RETTIFICATE Reduced shank twist drills

01063

HSS-G

DIN 338 Confezione Packaging

<5 d

d d=13 mm

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Codolo ridotto - 13mm

RETTIFICATA

Reduced shank - 13mm

Ground from the solid Ø h8

pcs.

cod.

13,25 13,5 13,75 14 14,25 14,5 14,75 15 15,25 15,5 15,75 16 16,5 17 17,5 18 18,5 19 19,5 20 20,5 21 21,5 22 22,5 23 23,5 24 24,5 25

108 108 108 108 114 114 114 114 120 120 120 120 125 125 130 130 135 135 140 140 145 145 150 150 150 155 155 160 160 160

160 160 160 160 169 169 169 169 178 178 178 178 184 184 191 191 198 198 205 205 213 213 221 221 221 229 229 236 236 236

13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13

3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

010631325 010631350 010631375 010631400 010631425 010631450 010631475 010631500 010631525 010631550 010631575 010631600 010631650 010631700 010631750 010631800 010631850 010631900 010631950 010632000 010632050 010632100 010632150 010632200 010632250 010632300 010632350 010632400 010632450 010632500

€ cad/each

24,851 22,682 24,851 23,214 29,155 25,368 29,155 26,870 35,468 30,936 35,468 32,477 32,716 34,537 36,251 38,776 42,403 43,824 49,020 49,020 50,439 50,439 51,706 51,706 53,408 53,408 54,311 54,311 57,099 57,099

Metalli Metals

Emulsione Lubrificant

SINISTRA LEFT HAND

PUNTE ELICOIDALI CILINDRICHE SINISTRE, INTERAMENTE RETTIFICATE Straight shank twist drills, left hand

01090 118°

W 27°

<5 d

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Emulsione Lubrificant

HSS-G

DIN 338

RETTIFICATA

Serie corta - Sinistra

Ground from the solid

Confezione Packaging

Short serie - Left hand

Ø h8

pcs.

cod.

cad/each

€

1 1,5 2 2,1 2,2 2,3 2,4 2,5 2,6 2,7 2,8 2,9 3 3,2 3,3 3,4 3,5 3,7 3,8 4 4,1 4,2 4,5 4,6 4,7 4,8 5 5,1 5,2 5,5 5,8 6 6,2 6,3 6,5 7 7,5 7,8 8 8,5 8,7 9 9,5 10 10,5 11 11,5 12 12,5 13 13,5

12 18 24 24 27 27 30 30 30 33 33 33 33 36 36 36 39 39 43 43 43 43 47 47 47 52 52 52 52 57 57 57 57 57 63 69 69 69 75 75 75 81 81 87 87 94 94 101 101 101 101

34 40 49 49 53 53 57 57 57 61 61 61 61 65 65 65 70 70 75 75 75 75 80 80 80 86 86 86 86 93 93 93 101 101 101 109 109 117 117 117 117 125 125 133 133 142 142 151 151 151 151

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

010900100 010900150 010900200 010900210 010900220 010900230 010900240 010900250 010900260 010900270 010900280 010900290 010900300 010900320 010900330 010900340 010900350 010900370 010900380 010900400 010900410 010900420 010900450 010900460 010900470 010900480 010900500 010900510 010900520 010900550 010900580 010900600 010900620 010900630 010900650 010900700 010900750 010900780 010900800 010900850 010900870 010900900 010900950 010901000 010901050 010901100 010901150 010901200 010901250 010901300 010901350

3,716 2,937 2,937 2,937 2,937 2,937 2,937 2,937 2,937 2,937 2,937 2,937 2,937 3,604 3,604 6,938 3,604 3,964 3,964 3,964 4,558 4,558 4,558 4,930 4,930 4,930 4,930 6,676 6,676 6,676 7,309 7,309 15,767 16,257 8,868 10,652 12,028 22,979 12,919 13,649 28,113 16,760 18,096 19,868 24,958 29,242 30,606 33,901 36,973 37,753 58,656

PUNTE ELICOIDALI CILINDRICHE, SERIE EXTRA CORTA, INTERAMENTE RETTIFICATE Straight shank twist drills, stub serie

01094 130°

HSS-G

W 27°

HV 820 SPLIT POINT DIN 1412C (Ø≥3)

<3 d

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Emulsione Lubrificant

Art. 01373 Self Disponibile su richiesta On demand

DIN 1897

Serie extra corta

RETTIFICATA

Extra short serie

Ground from the solid

Confezione Packaging

Ø h8

pcs.

cod.

cad/each

€

1,5 2 2,2 2,25 2,5 2,75 2,8 3 3,1 3,2 3,25 3,5 3,7 3,75 3,8 4 4,1 4,2 4,25 4,5 4,75 4,8 5 5,1 5,2 5,25 5,5 5,75 5,8 6 6,25 6,5 6,75 7 7,25 7,5 7,75 8 8,25 8,5 8,75 9 9,25 9,5 9,75 10 10,25 10,5 10,75 11 11,25 11,5 11,75 12 12,25 12,5 12,75 13

9 12 13 13 14 16 16 16 18 18 18 20 20 20 22 22 22 22 22 24 24 26 26 26 26 26 28 28 28 28 31 31 34 34 34 34 37 37 37 37 40 40 40 40 40 43 43 43 47 47 47 47 47 51 51 51 51 51

32 38 40 40 43 46 46 46 49 49 49 52 52 52 55 55 55 55 55 58 58 62 62 62 62 62 66 66 66 66 70 70 74 74 74 74 79 79 79 79 84 84 84 84 84 89 89 89 95 95 95 95 95 102 102 102 102 102

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

010940150 010940200 010940220 010940225 010940250 010940275 010940280 010940300 010940310 010940320 010940325 010940350 010940370 010940375 010940380 010940400 010940410 010940420 010940425 010940450 010940475 010940480 010940500 010940510 010940520 010940525 010940550 010940575 010940580 010940600 010940625 010940650 010940675 010940700 010940725 010940750 010940775 010940800 010940825 010940850 010940875 010940900 010940925 010940950 010940975 010941000 010941025 010941050 010941075 010941100 010941125 010941150 010941175 010941200 010941225 010941250 010941275 010941300

0,996 0,996 1,208 1,208 1,103 1,369 1,369 1,369 1,503 1,503 1,503 1,503 1,661 1,661 1,661 1,661 2,073 2,073 2,073 1,887 2,113 2,113 1,968 2,764 2,764 2,764 2,605 3,110 3,110 2,911 3,496 3,496 4,078 4,078 4,332 4,332 5,264 5,264 7,043 7,043 8,081 8,081 9,182 9,182 10,366 10,366 14,814 14,814 15,802 15,802 16,667 16,667 17,161 17,161 18,888 18,888 19,383 19,383

SINISTRA LEFT HAND

PUNTE ELICOIDALI CILINDRICHE SINISTRE, INTERAMENTE RETTIFICATE, SERIE EXTRA CORTA Straight shank twist drills, left hand, stub serie

01067 118°

W 27°

<3 d

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Emulsione Lubrificant

HSS-G

DIN 1897

RETTIFICATA

Serie extracorta - Sinistra

Ground from the solid

Confezione Packaging

Stub serie - Left hand

Ø h8

pcs.

cod.

1,5 2 2,2 2,5 2,7 2,8 3 3,1 3,2 3,5 3,7 3,75 3,8 4 4,2 4,5 4,8 5 5,1 5,2 5,5 5,7 5,8 6 6,5 7 7,5 8 8,5 9 9,5 10 10,2 10,5 11 11,5 12 12,5 13 14 15 16

9 12 13 14 16 16 16 18 18 20 20 20 22 22 22 24 26 26 26 26 28 28 28 28 31 34 34 37 37 40 40 43 43 43 47 47 51 51 51 54 56 58

32 38 40 43 46 46 46 49 49 52 52 52 55 55 55 58 62 62 62 62 66 66 66 66 70 74 74 79 79 84 84 89 89 89 95 95 102 102 102 107 111 115

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 3 3 3

010670150 010670200 010670220 010670250 010670270 010670280 010670300 010670310 010670320 010670350 010670370 010670375 010670380 010670400 010670420 010670450 010670480 010670500 010670510 010670520 010670550 010670570 010670580 010670600 010670650 010670700 010670750 010670800 010670850 010670900 010670950 010671000 010671020 010671050 010671100 010671150 010671200 010671250 010671300 010671400 010671500 010671600

€ cad/each

43,404 21,276 33,834 32,475 37,291 43,712 26,364 30,537 31,611 29,018 33,759 34,574 34,574 31,402 34,327 32,969 37,044 32,969 37,390 39,514 33,710 42,230 42,230 33,710 35,686 37,167 40,193 40,378 40,378 42,329 42,329 43,218 45,194 49,787 61,740 67,667 70,878 76,187 80,015 93,104 113,108 128,172

PUNTE ELICOIDALI CILINDRICHE, SERIE ELICA CONTRAPPOSTA, INTERAMENTE RETTIFICATE Straight shank twist drills, double ended

01095 130°

W 27°

HV 820 SPLIT POINT DIN 1412C (Ø≥3)

<3 d

R ≤ 800 N/mm2

HSS-G

Elica contrapposta

RETTIFICATA

Double ended

Ground from the solid

Confezione Packaging

Ø h8

pcs.

cod.

cad/each

€

2 2,5 3 3,2 3,25 3,3 3,4 3,5 3,75 4 4,1 4,2 4,25 4,5 4,75 4,9 5 5,1 5,5 6 6,5

10 10 11 11 11 11 14 14 14 14 14 17 17 17 17 17 17 17 17 17 17

38 43 46 49 49 49 52 52 55 55 55 58 58 58 62 62 62 62 66 66 66

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

010950200 010950250 010950300 010950320 010950325 010950330 010950340 010950350 010950375 010950400 010950410 010950420 010950425 010950450 010950475 010950490 010950500 010950510 010950550 010950600 010950650

1,711 1,711 1,969 1,969 1,969 1,969 1,969 1,969 2,212 2,212 2,632 2,632 2,632 2,900 3,207 3,207 3,207 4,281 4,281 4,702 5,309

Applicazioni Applications

L Acciaio Steel

l Ø

Metalli Metals

Emulsione Lubrificant

PUNTE ELICOIDALI CILINDRICHE SERIE LUNGA, INTERAMENTE RETTIFICATE Long straight shank twist drills

01096 130°

W 27°

HV 820 SPLIT POINT DIN 1412C (Ø≥3)

<8 d

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Emulsione Lubrificant

HSS-G

DIN 340

Serie lunga

RETTIFICATA

Long serie

Ground from the solid

Confezione Packaging

Ø h8

pcs.

cod.

cad/each

€

33 45 53 56 59 62 66 66 69 73 73 78 78 82 82 87 87 91 91 91 97 97 97 102 102 102 109 109 109 109 115 115 115 115 121 121 121 121 121 128 128 128 128 128 134 134 134 134 134 140 140 144 144 149 149 154 154 158 158 162 162 166 166

56 70 80 85 90 95 100 100 106 112 112 119 119 126 126 132 132 139 139 139 148 148 148 156 156 156 165 165 165 165 175 175 175 175 184 184 184 184 184 195 195 195 195 195 205 205 205 205 205 214 214 220 220 227 227 235 235 241 241 247 247 254 254

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 1 1 1 1 1 1 1 1

010960100 010960150 010960175 010960200 010960225 010960250 010960275 010960300 010960325 010960350 010960375 010960400 010960425 010960450 010960475 010960500 010960525 010960550 010960575 010960600 010960625 010960650 010960675 010960700 010960725 010960750 010960775 010960800 010960825 010960850 010960875 010960900 010960925 010960950 010960975 010961000 010961025 010961050 010961075 010961100 010961125 010961150 010961175 010961180 010961200 010961225 010961250 010961275 010961300 010961350 010961400 010961450 010961500 010961550 010961600 010961650 010961700 010961750 010961800 010961850 010961900 010961950 010962000

2,139 2,139 2,365 2,247 2,484 2,365 2,737 2,737 2,976 2,911 3,096 2,950 3,748 3,800 3,880 3,694 5,116 5,116 5,594 5,594 6,326 6,021 7,375 6,765 8,319 7,921 9,462 9,010 12,452 12,452 13,036 13,036 14,670 13,966 16,065 15,308 18,459 18,459 18,763 18,763 20,717 20,717 22,562 22,562 22,562 23,308 23,308 27,308 27,308 37,659 37,659 53,301 50,762 61,873 58,934 61,087 62,814 69,711 70,855 80,489 82,070 86,959 87,957

PUNTE ELICOIDALI CILINDRICHE, SERIE EXTRA LUNGA, INTERAMENTE RETTIFICATE Extra long straight shank twist drills

01098 130° W 27°

HV 820 AISI M2 SPLIT POINT DIN 1412C (Ø≥3)

<10 d

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

HSS-G

Serie extra lunga

DIN 1869/1 RETTIFICATA

Extra long serie

Ground from the solid

Confezione Packaging

Ø h8

pcs.

cod.

cad/each

€

2 2,5 3 3,5 4 4,5 5 5,25 5,5 5,75 6 6,5 6,8 7 7,5 7,75 8 8,5 9 9,5 10 10,2 10,5 11 11,5 11,75 12 12,5 13

85 95 100 115 120 125 135 135 140 140 140 150 155 155 155 165 165 165 175 175 185 185 185 195 195 205 205 205 205

125 140 150 165 175 185 195 195 205 205 205 215 225 225 225 240 240 240 250 250 265 265 265 280 280 295 295 295 295

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

010980200 010980250 010980300 010980350 010980400 010980450 010980500 010980525 010980550 010980575 010980600 010980650 010980680 010980700 010980750 010980775 010980800 010980850 010980900 010980950 010981000 010981020 010981050 010981100 010981150 010981175 010981200 010981250 010981300

10,853 11,398 12,620 13,391 13,391 14,562 14,562 17,689 17,689 17,689 17,689 21,093 24,350 24,350 27,542 30,135 30,135 31,639 40,003 43,529 43,529 43,529 43,529 43,529 54,844 54,844 54,844 57,439 57,439

Metalli Metals

Emulsione Lubrificant

<10Ø

PUNTE ELICOIDALI CILINDRICHE, SERIE EXTRA LUNGA, INTERAMENTE RETTIFICATE Extra long straight shank twist drills

01099

HSS-G

130°

Extra long serie

Ground from the solid

Confezione

W 27°

Serie extra lunga

DIN 1869/2 RETTIFICATA

Packaging

HV 820 AISI M2 SPLIT POINT DIN 1412C (Ø≥3)

<10 d

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Ø h8

pcs.

cod.

cad/each

€

3 3,5 4 4,5 5 5,5 5,75 6 6,5 7 7,5 8 8,5 9 9,5 10 10,5 11 11,5 12 12,5 13

130 145 150 160 170 180 180 180 190 200 200 210 210 220 220 235 235 250 250 260 260 260

190 210 220 235 245 260 260 260 275 290 290 305 305 320 320 340 340 365 365 375 375 375

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

010990300 010990350 010990400 010990450 010990500 010990550 010990575 010990600 010990650 010990700 010990750 010990800 010990850 010990900 010990950 010991000 010991050 010991100 010991150 010991200 010991250 010991300

15,520 16,118 16,666 19,257 19,789 25,853 25,853 25,853 27,542 31,958 36,732 37,411 48,966 58,262 58,980 58,980 61,201 61,201 64,276 77,122 80,964 80,964

Emulsione Lubrificant

<10Ø

01100 130° W 27°

HV 820 AISI M2 SPLIT POINT DIN 1412C (Ø≥3)

<10 d

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

HSS-G

DIN 1869/3

Confezione Packaging

Extra long serie

Ø h8

pcs.

cod.

cad/each

3,5 4 4,5 5 5,5 6 6,5 7 7,5 8 8,5 9 9,5 10 10,5 11 11,5 12 12,5 13

180 190 200 210 225 225 235 250 250 265 265 280 280 295 295 310 310 330 330 330

265 280 295 315 330 330 350 370 370 390 390 410 410 430 430 455 455 480 480 480

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

011000350 011000400 011000450 011000500 011000550 011000600 011000650 011000700 011000750 011000800 011000850 011000900 011000950 011001000 011001050 011001100 011001150 011001200 011001250 011001300

20,360 19,630 23,393 24,390 26,186 27,369 30,349 39,285 44,632 44,632 58,315 63,078 68,436 68,436 68,436 68,436 71,867 86,230 99,596 99,596

Metalli Metals

Emulsione Lubrificant

Serie extra lunga

RETTIFICATA

Ground from the solid

<10Ø

€

PUNTE ELICOIDALI CILINDRICHE, SERIE EXTRA LUNGA, INTERAMENTE RETTIFICATE Extra long straight shank twist drills

01129

Speciale infissi

HSS-G

Special for casing

130° W 27°

HV 820 SPLIT POINT DIN 1412C

R ≤ 800 N/mm2

Applicazioni Applications

Ø h8

pcs.

cod.

cad/each

€

3 5 5,3 5,8 5,8

16 30 30 30 30

100 210 210 150 210

10 10 10 10 10

011291000300 011292100500 011292100530 011291500580 011292100580

3,646 7,282 7,457 5,645 7,710

Acciaio Steel

Metalli Metals

Emulsione Lubrificant

130° W 35°

HV 820 AISI M2 SPLIT POINT DIN 1412C (Ø≥3)

≥10 d

R ≤ 800 N/mm2

Applicazioni Applications

HSS-G

Serie extra lunga

DIN 1869/1 RETTIFICATA

Extra long serie

Ground from the solid

Confezione Packaging

Ø h8

pcs.

cod.

cad/each

€

2 2,5 3 3,5 4 4,5 5 5,25 5,5 5,75 6 6,5 7 7,5 8 8,5 9 9,5 10 10,5 11 11,5 12 12,5 13

85 95 100 115 120 125 135 135 140 140 140 150 155 155 165 165 175 175 185 185 195 195 205 205 205

125 140 150 165 175 185 195 195 205 205 205 215 225 225 240 240 250 250 265 265 280 280 295 295 295

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

013700200 013700250 013700300 013700350 013700400 013700450 013700500 013700525 013700550 013700575 013700600 013700650 013700700 013700750 013700800 013700850 013700900 013700950 013701000 013701050 013701100 013701150 013701200 013701250 013701300

17,569 17,488 19,489 20,121 22,384 22,754 23,281 26,547 26,547 26,547 26,547 33,184 37,925 44,773 48,565 62,575 66,368 75,850 70,161 84,170 94,389 103,133 124,731 130,839 125,572

Acciaio Steel

Metalli Metals

≥10Ø

Emulsione Lubrificant

PARABOLIC

01370

PUNTE ELICOIDALI CILINDRICHE, SERIE EXTRA LUNGA, INTERAMENTE RETTIFICATE Extra long straight shank twist drills

PARABOLIC

01371

HSS-G

130°

Extra long serie

Ground from the solid

Confezione Packaging

W 35°

Serie extra lunga

DIN 1869/2 RETTIFICATA

HV 820 AISI M2 SPLIT POINT DIN 1412C (Ø≥3)

≥10 d

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Ø h8

pcs.

cod.

cad/each

€

3 3,5 4 4,5 5 5,5 6 6,5 7 7,5 8 8,5 9 9,5 10 10,5 11 11,5 12 12,5 13

130 145 150 160 170 180 180 190 200 200 210 210 220 220 235 235 250 250 260 260 260

190 210 220 235 245 260 260 275 290 290 305 305 320 320 340 340 365 365 375 375 375

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

013710300 013710350 013710400 013710450 013710500 013710550 013710600 013710650 013710700 013710750 013710800 013710850 013710900 013710950 013711000 013711050 013711100 013711150 013711200 013711250 013711300

23,667 23,983 24,182 29,356 28,257 37,610 36,719 41,191 46,563 55,518 55,518 75,217 77,009 91,334 87,753 114,616 131,437 146,453 147,555 156,205 154,014

Metalli Metals

Emulsione Lubrificant

≥10Ø

01372 130° W 35°

HV 820 AISI M2 SPLIT POINT DIN 1412C (Ø≥3)

≥10 d

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

HSS-G

DIN 1869/3 Confezione Packaging

Extra long serie

Ø h8

pcs.

cod.

cad/each

3,5 4 4,5 5 5,5 6 6,5 7 7,5 8 8,5 9 9,5 10 10,5 11 11,5 12 12,5 13

180 190 200 210 225 225 235 250 250 265 265 280 280 295 295 310 310 330 330 330

265 280 295 315 330 330 350 370 370 390 390 410 410 430 430 455 455 480 480 480

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

013720350 013720400 013720450 013720500 013720550 013720600 013720650 013720700 013720750 013720800 013720850 013720900 013720950 013721000 013721050 013721100 013721150 013721200 013721250 013721300

36,028 36,028 45,510 45,510 48,565 49,301 54,990 72,058 81,538 83,434 106,189 117,564 130,839 130,839 137,264 156,649 168,343 175,611 180,561 180,561

Metalli Metals

Emulsione Lubrificant

Serie extra lunga

RETTIFICATA

Ground from the solid

≥10Ø

€

PUNTE ELICOIDALI CILINDRICHE HSS RETTIFICATE, SERIE SPECIALI SUPER LUNGHE Long straight shank twist drills

01105

HSS-G

130°

Ground from the solid

Confezione Packaging

W 27°

L=305 mm

NORMA KRINO

HV 820 SPLIT POINT DIN 1412C

<10 d

R ≤ 800 N/mm2

Applicazioni Applications

€

pcs.

cod.

cad/each

6 6,5 7 7,5 8 8,5 9 9,5 10 10,5 11 11,5 12 12,5 13 14 15 16

228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228

305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305

6 6,5 7 7,5 8 8,5 9 9,5 10 10,5 11 11,5 12 12,5 13 13 13 13

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

011050600 011050650 011050700 011050750 011050800 011050850 011050900 011050950 011051000 011051050 011051100 011051150 011051200 011051250 011051300 011051400 011051500 011051600

27,329 30,212 38,834 44,595 48,907 58,260 58,260 60,412 60,412 61,852 61,852 64,012 64,012 67,127 67,127 83,430 95,941 107,046

Acciaio Steel

Metalli Metals

Emulsione Lubrificant

01114 130° W 27°

HV 820 SPLIT POINT DIN 1412C

HSS-G

L=460 mm

NORMA KRINO

Ground from the solid

Confezione Packaging

€

pcs.

cod.

cad/each

6 8 10 12 14 16

330 330 330 330 330 330

460 460 460 460 460 460

6 8 10 12 14 16

1 1 1 1 1 1

011140600 011140800 011141000 011141200 011141400 011141600

43,403 69,403 100,460 137,162 191,792 239,734

<10 d

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Emulsione Lubrificant

PUNTE ELICOIDALI CILINDRICHE, INTERAMENTE RETTIFICATE, SERIE CORTA, FINITURA BRILLANTE Fully ground straight shank twist drills

01070 130°

HSS-G

W 27°

DIN 338

Confezione Packaging

HV 820 AISI M2 SPLIT POINT DIN 1412C (Ø≥2,5)

<5 d

R ≤ 800 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

Art. 01071 Self Disponibile su richiesta On demand

Serie corta

RETTIFICATA

Short serie

Ground from the solid Ø h8

pcs.

cod.

cad/each

€

3 4 5 5 6 7 7 8 9 9 10 10 11 11 12 14 16 16 16 18 18 20 20 22 22 22 24 24 27 27 27 30 30 30 33 33 33 33 33 36 36 36 36 39 39 39 39 39 43 43 43 43 43 43 47 47 47 47 47 47 52 52 52

19 19 20 20 22 24 24 26 28 28 30 30 32 32 34 36 38 38 38 40 40 43 43 46 46 46 49 49 53 53 53 57 57 57 61 61 61 61 61 65 65 65 65 70 70 70 70 70 75 75 75 75 75 75 80 80 80 80 80 80 86 86 86

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

010700030 010700035 010700040 010700045 010700050 010700055 010700060 010700065 010700070 010700075 010700080 010700085 010700090 010700095 010700100 010700110 010700120 010700125 010700130 010700140 010700150 010700160 010700170 010700175 010700180 010700190 010700200 010700210 010700220 010700225 010700230 010700240 010700250 010700260 010700270 010700275 010700280 010700290 010700300 010700310 010700320 010700325 010700330 010700340 010700350 010700360 010700370 010700375 010700380 010700390 010700400 010700410 010700420 010700425 010700430 010700440 010700450 010700460 010700470 010700475 010700480 010700490 010700500

2,784 2,526 2,398 2,398 2,063 2,398 1,895 2,063 1,766 1,766 1,766 1,766 1,651 1,766 1,341 1,404 1,404 1,404 1,404 1,404 1,212 1,148 1,148 1,148 1,148 1,148 1,005 1,212 1,212 1,212 1,212 1,212 1,110 1,393 1,393 1,393 1,393 1,393 1,264 1,496 1,496 1,496 1,496 1,496 1,404 1,637 1,637 1,637 1,637 1,637 1,534 2,024 2,024 2,024 2,024 2,024 1,844 2,075 2,075 2,075 2,075 2,075 1,907

Serie corta Short serie

Ø h8

pcs.

cod.

cad/each

€

52 52 52 52 57 57 57 57 57 57 57 57 63 63 63 63 63 63 63 63 69 69 69 69 69 69 69 69 69 69 75 75 75 75 75 75 75 75 75 75 75 75 81 81 81 81 81 81 81 81 81 81 81 81 87 87 87 87 87 87 87 87 87

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

010700510 010700520 010700525 010700530 010700540 010700550 010700560 010700570 010700575 010700580 010700590 010700600 010700610 010700620 010700625 010700630 010700640 010700650 010700660 010700670 010700675 010700680 010700690 010700700 010700710 010700720 010700725 010700730 010700740 010700750 010700760 010700770 010700775 010700780 010700790 010700800 010700810 010700820 010700825 010700830 010700840 010700850 010700860 010700870 010700875 010700880 010700890 010700900 010700910 010700920 010700925 010700930 010700940 010700950 010700960 010700970 010700975 010700980 010700990 010701000 010701020 010701025 010701040

2,657 2,657 2,657 2,657 2,657 2,554 2,952 2,952 2,952 2,952 2,952 2,657 3,686 3,686 3,686 3,686 3,686 3,403 4,295 4,295 4,295 4,295 4,295 3,970 4,720 4,720 4,720 4,720 4,720 4,202 5,299 5,299 5,299 5,299 5,299 5,003 6,511 6,511 6,511 6,511 6,511 6,176 6,755 6,755 6,755 6,755 6,755 6,472 7,646 7,646 7,646 7,646 7,646 6,962 8,096 8,096 8,096 8,096 8,096 7,284 10,351 10,351 10,351

Ø h8

pcs.

cod.

cad/each

€

10,5 10,75 11 11,25 11,5 11,75 12 12,25 12,4 12,5 12,75 13 13,25 13,5 13,75 14 14,25 14,5 14,75 15 15,25 15,5 15,75 16 16,5 17 17,5 18 18,5 19 20

87 94 94 94 94 94 101 101 101 101 101 101 108 108 108 108 114 114 114 114 120 120 120 120 125 125 130 130 135 135 140

133 142 142 142 142 142 151 151 151 151 151 151 160 160 160 160 169 169 169 169 178 178 178 178 184 184 191 191 198 198 205

5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1

010701050 010701075 010701100 010701125 010701150 010701175 010701200 010701225 010701240 010701250 010701275 010701300 010701325 010701350 010701375 010701400 010701425 010701450 010701475 010701500 010701525 010701550 010701575 010701600 010701650 010701700 010701750 010701800 010701850 010701900 010702000

9,036 12,403 10,817 13,176 11,539 14,375 12,454 15,663 15,663 13,589 17,714 14,659 20,769 18,654 20,769 19,171 24,935 21,260 24,935 22,716 31,071 26,662 31,071 28,171 28,389 30,168 31,819 34,281 37,787 39,165 44,221

PUNTE ELICOIDALI CILINDRICHE CON CODOLO RIDOTTO INTERAMENTE RETTIFICATE, FINITURA BRILLANTE Reduced shank twist drills

01072

HSS-G

RETTIFICATA

Confezione

Ø h8

pcs.

cod.

cad/each

10,25 10,5 10,75 11 11,25 11,5 11,75 12 12,25 12,5 12,75 13 13,25 13,5 13,75 14 14,25 14,5 14,75 15 15,25 15,5 15,75 16 16,5 17 17,5 18 18,5 19 19,5 20

87 87 94 94 94 94 94 101 101 101 101 101 108 108 108 108 114 114 114 114 120 120 120 120 125 125 130 130 135 135 140 140

133 133 142 142 142 142 142 151 151 151 151 151 160 160 160 160 169 169 169 169 178 178 178 178 184 184 191 191 198 198 205 205

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1

010721025 010721050 010721075 010721100 010721125 010721150 010721175 010721200 010721225 010721250 010721275 010721300 010721325 010721350 010721375 010721400 010721425 010721450 010721475 010721500 010721525 010721550 010721575 010721600 010721650 010721700 010721750 010721800 010721850 010721900 010721950 010722000

13,280 11,965 15,328 13,742 16,102 14,465 17,302 15,381 18,591 16,514 20,642 17,585 24,109 22,007 24,109 22,522 28,286 24,610 28,286 26,068 34,410 30,014 34,410 31,509 31,741 33,507 35,169 37,619 41,138 42,519 47,559 47,559

d d=10 mm

R ≤ 800 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

Art. 01073 Self Disponibile su richiesta On demand

Reduced shank - 10mm

Ground from the solid

Packaging <5 d

Codolo ridotto - 10mm

DIN 338

€

PUNTE ELICOIDALI CILINDRICHE CON CODOLO RIDOTTO INTERAMENTE RETTIFICATE, FINITURA BRILLANTE Reduced shank twist drills

01074

HSS-G

RETTIFICATA

Confezione

Ø h8

pcs.

cod.

cad/each

13,25 13,5 13,75 14 14,25 14,5 14,75 15 15,25 15,5 15,75 16 16,5 17 17,5 18 18,5 19 19,5 20

108 108 108 108 114 114 114 114 120 120 120 120 125 125 130 130 135 135 140 140

160 160 160 160 169 169 169 169 178 178 178 178 184 184 191 191 198 198 205 205

13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13

3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1

010741325 010741350 010741375 010741400 010741425 010741450 010741475 010741500 010741525 010741550 010741575 010741600 010741650 010741700 010741750 010741800 010741850 010741900 010741950 010742000

24,109 22,007 24,109 22,522 28,286 24,610 28,286 26,068 34,410 30,014 34,410 31,509 31,741 33,507 35,169 37,619 41,138 42,519 47,559 47,559

d d=13 mm

R ≤ 800 N/mm2

Reduced shank - 13mm

Ground from the solid

Packaging <5 d

Codolo ridotto - 13mm

DIN 338

€

Applicazioni Applications

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

Art. 01073 Self Disponibile su richiesta On demand

PUNTE ELICOIDALI CILINDRICHE INTERAMENTE RETTIFICATE, SERIE EXTRA CORTA, FINITURA BRILLANTE Straight shank twist drills, stub serie

01076 130°

W 27°

HV 820 SPLIT POINT DIN 1412C (Ø≥3)

<3 d

R ≤ 800 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

HSS-G

DIN 1897

Serie extra corta

RETTIFICATA

Extra short serie

Ground from the solid

Confezione Packaging

Ø h8

pcs.

cod.

cad/each

€

1,5 2 2,2 2,25 2,5 2,75 2,8 3 3,1 3,2 3,25 3,3 3,5 3,7 3,75 3,8 4 4,1 4,2 4,25 4,5 4,75 4,8 5 5,1 5,2 5,25 5,5 5,75 5,8 6 6,25 6,5 6,75 7 7,5 8 8,5 9 9,5 10 10,5 11 11,5 12 12,5 13

9 12 13 13 14 16 16 16 18 18 18 18 20 20 20 22 22 22 22 22 24 24 26 26 26 26 26 28 28 28 28 31 31 34 34 34 37 37 40 40 43 43 47 47 51 51 51

32 38 40 40 43 46 46 46 49 49 49 49 52 52 52 55 55 55 55 55 58 58 62 62 62 62 62 66 66 66 66 70 70 74 74 74 79 79 84 84 89 89 95 95 102 102 102

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5

010760150 010760200 010760220 010760225 010760250 010760275 010760280 010760300 010760310 010760320 010760325 010760330 010760350 010760370 010760375 010760380 010760400 010760410 010760420 010760425 010760450 010760475 010760480 010760500 010760510 010760520 010760525 010760550 010760575 010760580 010760600 010760625 010760650 010760675 010760700 010760750 010760800 010760850 010760900 010760950 010761000 010761050 010761100 010761150 010761200 010761250 010761300

0,939 0,939 1,139 1,139 1,038 1,289 1,289 1,289 1,416 1,416 1,416 1,416 1,416 1,566 1,566 1,566 1,566 1,953 1,953 1,953 1,779 1,990 1,990 1,852 2,604 2,604 2,604 2,453 2,930 2,930 2,743 2,972 3,292 3,662 3,842 4,079 4,957 6,634 7,610 8,650 9,763 10,232 11,484 12,516 14,426 15,779 16,911

PUNTE ELICOIDALI SUPERCORTE PER LATTONIERI, FINITURA BRILLANTE

Extra short twist drills for portable applications

01050 130°

W 27°

HV 750÷820 SPLIT POINT DIN 1412C

<3 d

HSS-G

Serie Supercorta

NORMA KRINO RETTIFICATA

Supershort serie

Ground from the solid

Confezione Packaging

€

pcs.

cod.90°

cad/each

3 3,2 3,25 3,3 3,5 3,6 3,75 4 4,1 4,2 4,25 4,5 5

16 19 19 19 19 19 19 20 20 20 20 23 23

35 40 40 40 40 40 40 40 40 40 40 42 45

10 10 10 10 10 10 10 10 10 10 10 10 10

010500300 010500320 010500325 010500330 010500350 010500360 010500375 010500400 010500410 010500420 010500425 010500450 010500500

1,029 1,079 1,079 1,079 1,079 1,189 1,189 1,189 1,458 1,458 1,458 1,458 1,594

R ≤ 800 N/mm2

Applicazioni Applications

Metalli Metals

Punte speciali per lattonieri, carpentieri, coperturisti, fabbri, installatori. Foratura dolce e precisa, grazie all’affilatura split point autocentrante, su lamiere e tubi in acciaio, rame e plastica. Super short twist drills for cutting metal sheets, special for journeymen’s, carpenters, locksmith’s, tinsmith’s.

Acciaio Steel

Emulsione Lubrificant

PUNTE ELICOIDALI ELICA CONTRAPPOSTA, INTERAMENTE RETTIFICATE, FINITURA BRILLANTE Fully ground twist drills

01077 130°

W 27°

HV 820 SPLIT POINT DIN 1412C (Ø≥3)

<3 d

R ≤ 800 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

HSS-G

Elica contrapposta

RETTIFICATA

Double ended

Ground from the solid

Confezione Packaging

Ø h8

pcs.

cod.

cad/each

€

2 2,5 3 3,2 3,25 3,3 3,4 3,5 3,75 4 4,1 4,2 4,25 4,5 4,75 4,9 5 5,1 5,5 6

10 10 11 11 11 11 14 14 14 14 14 17 17 17 17 17 17 17 17 17

38 43 46 49 49 49 52 52 55 55 55 58 58 58 62 62 62 62 66 66

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

010770200 010770250 010770300 010770320 010770325 010770330 010770340 010770350 010770375 010770400 010770410 010770420 010770425 010770450 010770475 010770490 010770500 010770510 010770550 010770600

0,871 1,044 1,280 1,345 1,345 1,529 1,690 1,690 1,830 1,959 1,959 2,390 2,390 2,390 2,809 3,154 3,154 3,175 3,509 3,768

PUNTE ELICOIDALI CILINDRICHE SERIE LUNGA, INTERAMENTE RETTIFICATE, FINITURA BRILLANTE Long straight shank twist drills

01078 130°

W 27°

DIN 340

HSS-G

Serie lunga

RETTIFICATA

Long serie

Ground from the solid

Confezione Packaging

HV 820 SPLIT POINT DIN 1412C (Ø≥3)

<8 d

R ≤ 800 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

Taglio dei materiali con R ≤ 800 N/mm2 quali acciai legati, ghise tutti i metalli in genere, la grafite. Precisione di foratura e costanza di rendimenti elevati. High precision and high performances in cutting alloy steel up to R ≤ 800 N/mm2.

Ø h8

pcs.

cod.

cad/each

€

1,5 1,75 2 2,25 2,5 2,75 3 3,25 3,5 3,75 4 4,25 4,5 4,75 5 5,25 5,5 5,75 6 6,25 6,5 6,75 7 7,25 7,5 7,75 8 8,25 8,5 8,75 9 9,25 9,5 9,75 10 10,5 11 11,5 12 12,5 13 13,5 14 14,5 15 15,5 16 16,5 17 17,5 18 18,5 19 19,5 20

45 53 56 59 62 66 66 69 73 73 78 78 82 82 87 87 91 91 91 97 97 97 102 102 102 109 109 109 109 115 115 115 115 121 121 121 128 128 134 134 134 140 140 144 144 149 149 154 154 158 158 162 162 166 166

70 80 85 90 95 100 100 106 112 112 119 119 126 126 132 132 139 139 139 148 148 148 156 156 156 165 165 165 165 175 175 175 175 184 184 184 195 195 205 205 205 214 214 220 220 227 227 235 235 241 241 247 247 254 254

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 1 1 1 1 1 1 1 1

010780150 010780175 010780200 010780225 010780250 010780275 010780300 010780325 010780350 010780375 010780400 010780425 010780450 010780475 010780500 010780525 010780550 010780575 010780600 010780625 010780650 010780675 010780700 010780725 010780750 010780775 010780800 010780825 010780850 010780875 010780900 010780925 010780950 010780975 010781000 010781050 010781100 010781150 010781200 010781250 010781300 010781350 010781400 010781450 010781500 010781550 010781600 010781650 010781700 010781750 010781800 010781850 010781900 010781950 010782000

2,056 2,275 2,160 2,389 2,275 2,632 2,632 2,862 2,799 2,977 2,838 3,603 3,653 3,731 3,552 4,919 4,919 5,379 5,379 6,083 5,789 7,092 6,504 7,998 7,616 9,098 8,663 11,973 11,973 12,534 12,534 14,105 13,429 15,448 14,720 17,749 18,042 19,919 21,696 22,411 26,257 36,212 36,212 51,251 48,810 59,494 56,668 58,737 60,398 67,031 68,130 77,394 78,914 83,615 84,573

PUNTE ELICOIDALI INTERAMENTE RETTIFICATE, ATTACCO 1/4" HEX FORM E, FINITURA BRILLANTE Fully ground twist drills whit 1/4" quich change shank

01079

1/4" HEX FORM E

~DIN 338

HSS-G

Ground from the solid Ø h8

pcs.

cod.

cad/each

1,5 2 2,5 3 3,25 3,5 4 4,25 4,5 5 5,5 6 6,5 7 7,5 8 8,5 9 9,5 10

18 24 30 33 36 39 43 43 47 52 57 57 63 69 69 75 75 81 81 87

60 69 77 81 85 90 95 95 100 106 113 113 121 109 109 117 117 125 125 133

1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4

10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5

010790150 010790200 010790250 010790300 010790325 010790350 010790400 010790425 010790450 010790500 010790550 010790600 010790650 010790700 010790750 010790800 010790850 010790900 010790950 010791000

1,524 1,524 1,585 1,981 2,107 2,107 2,304 2,699 2,699 2,899 3,494 3,877 5,190 6,008 7,743 7,743 9,636 11,197 12,338 12,781

Confezione Packaging <5 d

1/4" HEX FORM E

R ≤ 800 N/mm2

Applicazioni

€

Applications

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

PUNTA CON ATTACCO ESAGONALE 1/4” PER AVVITATORI E TRAPANI REVERSIBILI

Drill bits with 1/4 hexagon drive for power screwdrivers and cordless drills

10211

1/4" HEX

R ≤ 800 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

1/4" HEX

HSS-G Ø h8

pcs.

cod.

cad/each

€

1 1,5 2 2,5 (M3) 3 3,3 (M4) 3,5 4 4,2 (M5) 4,5 5 (M6) 5,5 6 6,5 6,8 (M8) 7 7,5 8 8,5 (M10) 9 9,5 10 10,2 (M12)

7 10 12 14 16 18 18 20 20 24 26 26 26 30 30 30 32 32 33 33 38 38 38

32 32 34 36 38 40 40 44 45 46 50 50 50 50 50 50 51 51 53 53 54 54 54

1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

102110100 102110150 102110200 102110250 102110300 102110330 102110350 102110400 102110420 102110450 102110500 102110550 102110600 102110650 102110680 102110700 102110750 102110800 102110850 102110900 102110950 102111000 102111020

7,194 7,194 7,194 7,194 7,194 7,194 7,194 7,194 7,194 7,194 7,194 7,476 7,476 7,476 7,476 7,476 8,801 8,801 10,058 10,058 11,311 11,311 11,311

POLLICI INCHES

PUNTE ELICOIDALI CILINDRICHE IN POLLICI, ESECUZIONE INTERAMENTE RETTIFICATA, SERIE CORTA, FINITURA BRILLANTE Fully ground straight shank twist drills in inches

01115 130°

W 27°

Serie corta - Pollici

ANSI B94 RETTIFICATA

HSS-G

Short serie - Inches

Ground from the solid

Confezione Packaging

HV 820 SPLIT POINT DIN 1412 C

<5 d

R ≤ 800 N/mm2

Ø inch

Ø mm

l inch

L inch

pcs.

cod.

1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2

1,59 1,98 2,38 2,78 3,17 3,57 3,97 4,37 4,76 5,16 5,56 5,95 6,35 6,75 7,14 7,54 7,94 8,33 8,73 9,13 9,52 9,92 10,32 10,72 11,11 11,51 11,91 12,30 12,70

7/8 1” 1-1/4 1-1/2 1-5/8 1-3/4 2” 2-1/8 2-5/16 2-7/16 2-1/2 2-5/8 2-3/4 2-7/8 2-15/16 3-1/16 3-3/16 3-5/16 3-7/16 3-1/2 3-5/8 3-3/4 3-7/8 3-15/16 4-1/16 4-3/16 4-5/16 4-7/16 4-1/2

1-7/8 2” 2-1/4 2-5/8 2-3/4 2-7/8 3-1/8 3-1/4 3-1/2 3-5/8 3-3/4 3-7/8 4” 4-1/8 4-1/4 4-3/8 4-1/2 4-5/8 4-3/4 4-7/8 5” 5-1/8 5-1/4 5-3/8 5-1/2 5-5/8 5-3/4 5-7/8 6”

10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

0111514 0111515 0111516 0111517 0111518 0111519 0111520 0111521 0111522 0111523 0111524 0111525 0111526 0111527 0111528 0111529 0111530 0111531 0111532 0111533 0111534 0111535 0111536 0111537 0111538 0111539 0111540 0111541 0111542

€ cad/each

0,899 0,954 1,101 1,276 1,342 1,491 1,584 1,719 1,948 2,270 2,498 2,632 2,832 3,183 3,707 3,949 4,324 5,976 6,246 6,675 6,810 7,036 7,600 8,501 9,869 10,192 10,676 11,521 12,812

Applicazioni Applications

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

PUNTE ELICOIDALI CILINDRICHE, ESECUZIONE INTERAMENTE RETTIFICATA, SERIE CORTA CON ANGOLO AL VERTICE DI 118° Fully ground straight shank twist drills

01066 118°

W 27°

Short serie - 118°

Ground from the solid

Confezione Packaging

AISI M2 HV 820

<5 d

R ≤ 800 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

Serie corta - 118°

DIN 338 - 118° RETTIFICATA

HSS-G

Ø h8

pcs.

cod.

12 14 16 16 16 18 18 20 20 22 22 22 24 24 27 27 27 30 30 30 33 33 33 33 36 36 36 36 36 39 39 39 39 39 43 43 43 43 43 43 47 47 47 47 47 47 52 52 52 52 52 52 52 57 57 57 57 57 57 57 57 63 63

34 36 38 38 38 40 40 43 43 46 46 46 49 49 53 53 53 57 57 57 61 61 61 61 61 65 65 65 65 70 70 70 70 70 75 75 75 75 75 75 80 80 80 80 80 80 86 86 86 86 86 86 86 93 93 93 93 93 93 93 93 101 101

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

010660100 010660110 010660120 010660125 010660130 010660140 010660150 010660160 010660170 010660175 010660180 010660190 010660200 010660210 010660220 010660225 010660230 010660240 010660250 010660260 010660270 010660275 010660280 010660290 010660300 010660310 010660320 010660325 010660330 010660340 010660350 010660360 010660370 010660375 010660380 010660390 010660400 010660410 010660420 010660425 010660430 010660440 010660450 010660460 010660470 010660475 010660480 010660490 010660500 010660510 010660520 010660525 010660530 010660540 010660550 010660560 010660570 010660575 010660580 010660590 010660600 010660610 010660620

€ cad/each

0,780 0,780 0,780 0,780 0,780 0,780 0,780 0,780 0,780 0,780 0,780 0,780 0,780 0,780 0,780 0,780 0,780 0,780 0,780 0,780 0,780 0,780 0,780 0,780 0,780 0,917 0,917 0,917 0,917 0,917 0,917 0,991 0,991 0,991 0,991 0,991 0,991 1,263 1,263 1,263 1,263 1,263 1,263 1,585 1,585 1,585 1,585 1,585 1,585 2,093 2,093 2,093 2,093 2,093 2,093 2,416 2,416 2,416 2,416 2,416 2,416 2,613 2,613

Serie corta - 118° Short serie - 118°

Ø h8

pcs.

cod.

cad/each

€

6,25 6,3 6,4 6,5 6,6 6,7 6,75 6,8 6,9 7 7,1 7,2 7,25 7,3 7,4 7,5 7,6 7,7 7,75 7,8 7,9 8 8,1 8,2 8,25 8,3 8,4 8,5 8,6 8,7 8,75 8,8 8,9 9 9,1 9,2 9,25 9,3 9,4 9,5 9,6 9,7 9,75 9,8 9,9 10 10,1 10,2 10,25 10,3 10,4 10,5 10,6 10,7 10,75 10,8 10,9 11 11,1 11,2 11,25 11,3 11,4

63 63 63 63 63 63 69 69 69 69 69 69 69 69 69 69 75 75 75 75 75 75 75 75 75 75 75 75 81 81 81 81 81 81 81 81 81 81 81 81 87 87 87 87 87 87 87 87 87 87 87 87 87 94 94 94 94 94 94 94 94 94 94

101 101 101 101 101 101 109 109 109 109 109 109 109 109 109 109 117 117 117 117 117 117 117 117 117 117 117 117 125 125 125 125 125 125 125 125 125 125 125 125 133 133 133 133 133 133 133 133 133 133 133 133 133 142 142 142 142 142 142 142 142 142 142

10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

010660625 010660630 010660640 010660650 010660660 010660670 010660675 010660680 010660690 010660700 010660710 010660720 010660725 010660730 010660740 010660750 010660760 010660770 010660775 010660780 010660790 010660800 010660810 010660820 010660825 010660830 010660840 010660850 010660860 010660870 010660875 010660880 010660890 010660900 010660910 010660920 010660925 010660930 010660940 010660950 010660960 010660970 010660975 010660980 010660990 010661000 010661010 010661020 010661025 010661030 010661040 010661050 010661060 010661070 010661075 010661080 010661090 010661100 010661110 010661120 010661125 010661130 010661140

2,613 2,613 2,613 2,613 3,158 3,158 3,158 3,158 3,158 3,158 3,705 3,705 3,705 3,705 3,705 3,705 4,670 4,670 4,670 4,670 4,670 4,670 5,065 5,065 5,065 5,065 5,065 5,065 5,897 5,897 5,897 5,897 5,897 5,897 6,415 6,415 6,415 6,415 6,415 6,415 7,582 7,582 7,582 7,582 7,582 7,582 8,454 8,454 8,454 8,454 8,454 8,454 9,494 9,494 9,494 9,494 9,494 9,494 10,339 10,339 10,339 10,339 10,339

Ø h8

pcs.

cod.

cad/each

€

11,5 11,6 11,7 11,75 11,8 11,9 12 12,1 12,2 12,25 12,3 12,4 12,5 12,6 12,7 12,75 12,8 12,9 13

94 94 94 94 94 101 101 101 101 101 101 101 101 101 101 101 101 101 101

142 142 142 142 142 151 151 151 151 151 151 151 151 151 151 151 151 151 151

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

010661150 010661160 010661170 010661175 010661180 010661190 010661200 010661210 010661220 010661225 010661230 010661240 010661250 010661260 010661270 010661275 010661280 010661290 010661300

10,339 11,927 11,927 11,927 11,927 11,927 11,927 13,044 13,044 13,044 13,044 13,044 13,044 14,136 14,136 14,136 14,136 14,136 14,136

PUNTE ELICOIDALI CILINDRICHE, ESECUZIONE INTERAMENTE RETTIFICATA, SERIE EXTRA CORTA CON ANGOLO AL VERTICE DI 118° Fully ground straight shank twist drills, stub serie

01022 118°

W 27°

AISI M2 HV 820

<3 d

HSS-G

Serie extra corta - 118°

DIN 1897 - 118° RETTIFICATA

Stub serie - 118°

Ground from the solid

Confezione Packaging

Ø h8 2,5 3 3,2 3,25 3,5 3,7 3,75 4 4,2 4,25 4,5 5 5,5 6

pcs.

cod.

14 16 18 18 20 20 20 22 22 22

43 46 49 49 52 52 52 55 55 55

10 10 10 10 10 10

010220250 010220300 010220320 010220325 010220350 010220370

10 10 10 10

010220375 010220400 010220420 010220425

24 26 28 28

58 62 66 66

10 10 10 10

010220450 010220500 010220550 010220600

€ cad/each

1,028 1,276 1,401 1,401 1,401 1,549 1,549 1,549 1,933 1,933 1,760 1,833 2,427 2,714

R ≤ 800 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

118°

HSS AISI M2

W 27°

PUNTE ELICOIDALI CILINDRICHE “BASIC”, ESECUZIONE RETTIFICATA, SERIE CORTA, FINITURA LUCIDA “Basic” fully ground straight shank twist drills

01350 130°

HSS-G

W 27°

DIN 338

Confezione Packaging

HV 750÷820 SPLIT POINT DIN 1412C (Ø≥3 mm)

<5 d

R ≤ 700 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

Art. 01351 Self Disponibile su richiesta On demand

Taglio dei materiali con R ≤ 700 N/mm2 quali acciai legati, ghise, tutti i metalli in genere, la grafite. Precisione di foratura e costanza di rendimenti elevati. High precision and high performances in cutting alloy steel up to R ≤ 700 N/mm2.

100

Serie corta

RETTIFICATA

Short serie

Ground from the solid Ø h8

L pcs.

2,5 3 3 4 5 5 6 7 7 8 9 9 10 10 11 11 12 14 16 16 16 18 18 20 20 22 22 22 24 24 27 27 27 30 30 30 33 33 33 33 33 36 36 36 36 39 39 39 39 39 43 43 43 43 43 43 47 47 47 47 47 47 52

19 19 19 19 20 20 22 24 24 26 28 28 30 30 32 32 34 36 38 38 38 40 40 43 43 46 46 46 49 49 53 53 53 57 57 57 61 61 61 61 61 65 65 65 65 70 70 70 70 70 75 75 75 75 75 75 80 80 80 80 80 80 86

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

cod.

cad/each

€

Ø h8

pcs.

cod.

cad/each

€

013500020 013500025 013500030 013500035 013500040 013500045 013500050 013500055 013500060 013500065 013500070 013500075 013500080 013500085 013500090 013500095 013500100 013500110 013500120 013500125 013500130 013500140 013500150 013500160 013500170 013500175 013500180 013500190 013500200 013500210 013500220 013500225 013500230 013500240 013500250 013500260 013500270 013500275 013500280 013500290 013500300 013500310 013500320 013500325 013500330 013500340 013500350 013500360 013500370 013500375 013500380 013500390 013500400 013500410 013500420 013500425 013500430 013500440 013500450 013500460 013500470 013500475 013500480

1,199 1,199 1,199 1,199 1,199 1,199 1,032 1,032 1,032 1,032 1,032 1,032 1,032 1,032 1,032 1,032 0,774 0,804 0,804 0,804 0,804 0,804 0,703 0,660 0,660 0,660 0,660 0,660 0,578 0,671 0,671 0,671 0,671 0,671 0,640 0,774 0,774 0,774 0,774 0,774 0,724 0,897 0,897 0,897 0,897 0,897 0,867 0,971 0,971 0,971 0,971 0,971 0,939 1,116 1,116 1,116 1,116 1,116 1,075 1,199 1,199 1,199 1,199

52 52 52 52 52 52 57 57 57 57 57 57 57 57 63 63 63 63 63 63 63 63 69 69 69 69 69 69 69 69 69 69 75 75 75 75 75 75 75 75 75 75 75 75 81 81 81 81 81 81 81 81 81 81 81 81 87 87 87 87 87 87 87

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

013500490 013500500 013500510 013500520 013500525 013500530 013500540 013500550 013500560 013500570 013500575 013500580 013500590 013500600 013500610 013500620 013500625 013500630 013500640 013500650 013500660 013500670 013500675 013500680 013500690 013500700 013500710 013500720 013500725 013500730 013500740 013500750 013500760 013500770 013500775 013500780 013500790 013500800 013500810 013500820 013500825 013500830 013500840 013500850 013500860 013500870 013500875 013500880 013500890 013500900 013500910 013500920 013500925 013500930 013500940 013500950 013500960 013500970 013500975 013500980 013500990 013501000 013501010

1,199 1,137 1,560 1,560 1,560 1,560 1,560 1,518 1,663 1,663 1,663 1,663 1,663 1,591 2,035 2,035 2,035 2,035 2,035 1,963 2,365 2,365 2,365 2,365 2,365 2,293 2,570 2,570 2,570 2,570 2,570 2,426 3,057 3,057 3,057 3,057 3,057 2,892 3,748 3,748 3,748 3,748 3,748 3,562 3,902 3,902 3,902 3,902 3,902 3,728 4,079 4,079 4,079 4,079 4,079 3,902 4,678 4,678 4,678 4,678 4,678 4,359 5,834

Serie corta Short serie

Ø h8

pcs.

cod.

cad/each

€

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3

013501020 013501025 013501030 013501040 013501050 013501060 013501070 013501075 013501080 013501090 013501100 013501110 013501120 013501125 013501130 013501140 013501150 013501160 013501170 013501175 013501180 013501190 013501200 013501210 013501220 013501225 013501230 013501240 013501250 013501260 013501270 013501275 013501280 013501290 013501300 013501310 013501320 013501325 013501330 013501340 013501350 013501360 013501370 013501375 013501380 013501390 013501400 013501410 013501420 013501425 013501430 013501440 013501450 013501460 013501470 013501475 013501480 013501490 013501500 013501510 013501520 013501525 013501530

5,834 5,834 5,834 5,834 5,204 6,981 6,981 6,981 6,981 6,981 6,247 7,445 7,445 7,445 7,445 7,445 6,661 8,034 8,034 8,034 8,034 8,034 7,176 8,767 8,767 8,767 8,767 8,767 7,828 9,284 9,284 9,284 9,284 9,284 8,292 11,482 11,482 11,482 11,482 11,482 11,482 12,485 12,485 12,485 12,485 12,485 12,485 14,518 14,518 14,518 14,518 14,518 14,518 15,191 15,191 15,191 15,191 15,191 15,191 16,873 16,873 16,873 16,873

Ø h8

pcs.

cod.

cad/each

€

15,4 15,5 15,6 15,7 15,75 15,8 15,9 16 16,25 16,5 16,75 17 17,25 17,5 17,75 18 18,25 18,5 18,75 19 19,25 19,5 19,75 20

120 120 120 120 120 120 120 120 125 125 125 125 130 130 130 130 135 135 135 135 140 140 140 140

178 178 178 178 178 178 178 178 184 184 184 184 191 191 191 191 198 198 198 198 205 205 205 205

3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

013501540 013501550 013501560 013501570 013501575 013501580 013501590 013501600 013501625 013501650 013501675 013501700 013501725 013501750 013501775 013501800 013501825 013501850 013501875 013501900 013501925 013501950 013501975 013502000

16,873 16,873 17,802 17,802 17,802 17,802 17,802 17,802 20,250 20,250 21,262 21,262 23,874 23,874 25,062 25,062 25,062 25,062 26,921 26,921 30,050 30,050 30,886 30,886

101

PUNTE ELICOIDALI CILINDRICHE “BASIC”, CON CODOLO RIDOTTO, INTERAMENTE RETTIFICATE, FINITURA LUCIDA Fully ground straight shank twist drills

01352

HSS-G

RETTIFICATA

Confezione

Ø h8

pcs.

cod.

cad/each

10,25 10,5 10,75 11 11,25 11,5 11,75 12 12,25 12,5 12,75 13 13,25 13,5 13,75 14 14,25 14,5 14,75 15 15,25 15,5 15,75 16 16,5 17 17,5 18 18,5 19 19,5 20

87 87 94 94 94 94 94 101 101 101 101 101 108 108 108 108 114 114 114 114 120 120 120 120 125 125 130 130 135 135 140 140

133 133 142 142 142 142 142 151 151 151 151 151 160 160 160 160 169 169 169 169 178 178 178 178 184 184 191 191 198 198 205 205

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1

013521025 013521050 013521075 013521100 013521125 013521150 013521175 013521200 013521225 013521250 013521275 013521300 013521325 013521350 013521375 013521400 013521425 013521450 013521475 013521500 013521525 013521550 013521575 013521600 013521650 013521700 013521750 013521800 013521850 013521900 013521950 013522000

8,205 7,589 9,338 8,614 9,814 9,025 10,386 9,543 11,108 10,181 11,616 11,119 15,621 15,621 15,913 15,913 18,040 18,040 18,752 18,752 20,523 20,523 21,494 21,494 24,074 25,132 27,884 29,126 29,126 31,081 34,363 35,248

d d=10 mm

R ≤ 700 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

102

Reduced shank - 10mm

Ground from the solid

Packaging <5 d

Codolo ridotto - 10mm

DIN 338

€

PUNTE ELICOIDALI CILINDRICHE “BASIC”, CON CODOLO RIDOTTO, INTERAMENTE RETTIFICATE, FINITURA LUCIDA Fully ground straight shank twist drills

01354

HSS-G

RETTIFICATA

Confezione

Ø h8

pcs.

cod.

cad/each

13,25 13,5 13,75 14 14,25 14,5 14,75 15 15,25 15,5 15,75 16 16,5 17 17,5 18 18,5 19 19,5 20 20,5 21 21,5 22 22,5 23 23,5 24 24,5 25

108 108 108 108 114 114 114 114 120 120 120 120 125 125 130 130 135 135 140 140 145 145 150 150 150 155 155 160 160 160

160 160 160 160 169 169 169 169 178 178 178 178 184 184 191 191 198 198 205 205 213 213 221 221 221 229 229 236 236 236

13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13

3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

013541325 013541350 013541375 013541400 013541425 013541450 013541475 013541500 013541525 013541550 013541575 013541600 013541650 013541700 013541750 013541800 013541850 013541900 013541950 013542000 013542050 013542100 013542150 013542200 013542250 013542300 013542350 013542400 013542450 013542500

15,621 15,621 15,913 15,913 18,040 18,040 18,752 18,752 20,523 20,523 21,494 21,494 24,074 25,132 27,884 29,126 29,126 31,081 34,363 35,248 40,626 40,626 41,633 41,633 42,899 42,899 44,743 51,227 46,337 51,227

d d=13 mm

Reduced shank - 13mm

Ground from the solid

Packaging <5 d

Codolo ridotto - 13mm

DIN 338

€

R ≤ 700 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

103

PUNTE ELICOIDALI CILINDRICHE “BASIC”, RETTIFICATE LUCIDE, SERIE EXTRA CORTA Fully ground straight shank twist drills

01356 130°

W 27°

HV 750÷820 SPLIT POINT DIN 1412C

<3 d

R ≤ 700 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

104

HSS-G

DIN 1897

Serie extra corta

RETTIFICATA

Extra short serie

Ground from the solid

Confezione Packaging

€

pcs.

cod.

cad/each

1,5 2 2,2 2,25 2,5 2,75 2,8 3 3,1 3,2 3,25 3,5 3,7 3,75 4 4,1 4,2 4,25 4,5 4,75 4,8 5 5,1 5,2 5,25 5,5 5,75 6 6,25 6,5 6,75 7 7,25 7,5 7,75 8 8,25 8,5 8,75 9 9,25 9,5 9,75 10 10,25 10,5 10,75 11 11,25 11,5 11,75 12 12,25 12,5 12,75 13

9 12 13 13 14 16 16 16 18 18 18 20 20 20 22 22 22 22 24 24 26 26 26 26 26 28 28 28 31 31 34 34 34 34 37 37 37 37 40 40 40 40 40 43 43 43 47 47 47 47 47 51 51 51 51 51

32 38 40 40 43 46 46 46 49 49 49 52 52 52 55 55 55 55 58 58 62 62 62 62 62 66 66 66 70 70 74 74 74 74 79 79 79 79 84 84 84 84 84 89 89 89 95 95 95 95 95 102 102 102 102 102

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

013560150 013560200 013560220 013560225 013560250 013560275 013560280 013560300 013560310 013560320 013560325 013560350 013560370 013560375 013560400 013560410 013560420 013560425 013560450 013560475 013560480 013560500 013560510 013560520 013560525 013560550 013560575 013560600 013560625 013560650 013560675 013560700 013560725 013560750 013560775 013560800 013560825 013560825 013560875 013560900 013560925 013560950 013560975 013561000 013561025 013561050 013561075 013561100 013561125 013561150 013561175 013561200 013561225 013561250 013561275 013561300

0,672 0,713 0,889 0,889 1,073 1,073 1,073 1,148 1,261 1,261 1,261 1,261 1,394 1,394 1,394 1,170 1,170 1,170 1,170 1,360 1,360 1,360 1,560 1,560 1,560 1,560 1,751 1,751 1,938 1,938 2,239 2,239 2,498 2,498 2,779 2,779 3,201 3,201 3,780 3,780 4,233 4,233 4,683 4,683 4,989 4,989 4,989 5,292 5,744 5,744 6,500 6,500 6,804 6,804 7,256 7,256

PUNTE ELICOIDALI CILINDRICHE “BASIC”, RETTIFICATE LUCIDE, SERIE LUNGA Long straight shank twist drills

01358 130°

W 27°

HV 750÷820 SPLIT POINT DIN 1412C

<8 d

R ≤ 700 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

HSS-G

DIN 340

Serie lunga

RETTIFICATA

Long serie

Ground from the solid

Confezione Packaging

pcs.

cod.

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 1 1 1 1 1 1 1 1

013580100 013580150 013580175 013580200 013580225 013580250 013580275 013580300 013580325 013580350 013580375 013580400 013580425 013580450 013580475 013580500 013580525 013580550 013580575 013580600 013580625 013580650 013580675 013580700 013580725 013580750 013580775 013580800 013580825 013580850 013580875 013580900 013580925 013580950 013580975 013581000 013581025 013581050 013581075 013581100 013581125 013581150 013581175 013581180 013581200 013581225 013581250 013581275 013581300 013581350 013581400 013581450 013581500 013581550 013581600 013581650 013581700 013581750 013581800 013581850 013581900 013581950 013582000

€ cad/each

1,103 1,284 1,399 1,399 1,523 1,523 1,735 1,934 2,356 2,356 2,596 2,596 2,848 2,848 3,062 3,062 3,551 3,551 3,950 3,950 4,542 4,542 5,224 5,224 6,021 6,021 6,978 6,978 7,604 7,604 8,751 8,751 9,344 9,344 10,882 10,882 12,112 12,112 14,119 14,119 15,661 15,661 17,559 17,559 17,559 18,771 18,771 19,558 19,558 21,486 24,642 27,152 28,868 29,513 30,608 33,385 34,401 37,754 40,642 42,822 45,632 47,733 50,645

105

PUNTE ELICOIDALI CILINDRICHE RETTIFICATE, QUALITÀ STANDARD, FINITURA BLACK & WHITE Standard fully ground straight shank drills with black & white finish

01080 130°

DIN 338

HSS-G

W 27°

Confezione Packaging

HV 750÷820 SPLIT POINT DIN 1412C

<5 d

R ≤ 650 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

Art. 01081 Self Disponibile su richiesta On demand

Taglio del ferro, acciaio, metalli in genere con R ≤ 650 N/mm2. For drilling in iron, steel, metals up to R ≤ 650 N/mm2.

106

Serie corta

RETTIFICATA

Short serie

Ground from the solid Ø

pcs.

cod.

12 14 16 16 16 18 18 20 20 22 22 22 24 24 27 27 27 30 30 30 33 33 33 33 33 36 36 36 36 39 39 39 39 39 43 43 43 43 43 43 47 47 47 47 47 47 52 52 52 52 52 52 52 57 57 57 57 57 57 57 57 63 63

34 36 38 38 38 40 40 43 43 46 46 46 49 49 53 53 53 57 57 57 61 61 61 61 61 65 65 65 65 70 70 70 70 70 75 75 75 75 75 75 80 80 80 80 80 80 86 86 86 86 86 86 86 93 93 93 93 93 93 93 93 101 101

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

010800100 010800110 010800120 010800125 010800130 010800140 010800150 010800160 010800170 010800175 010800180 010800190 010800200 010800210 010800220 010800225 010800230 010800240 010800250 010800260 010800270 010800275 010800280 010800290 010800300 010800310 010800320 010800325 010800330 010800340 010800350 010800360 010800370 010800375 010800380 010800390 010800400 010800410 010800420 010800425 010800430 010800440 010800450 010800460 010800470 010800475 010800480 010800490 010800500 010800510 010800520 010800525 010800530 010800540 010800550 010800560 010800570 010800575 010800580 010800590 010800600 010800610 010800620

€ cad/each

0,601 0,642 0,642 0,642 0,601 0,601 0,601 0,642 0,642 0,642 0,590 0,590 0,590 0,684 0,684 0,684 0,632 0,632 0,632 0,684 0,684 0,684 0,642 0,642 0,642 0,853 0,853 0,853 0,789 0,789 0,789 0,915 0,915 0,915 0,873 0,873 0,873 0,990 0,990 0,990 0,937 0,937 0,937 1,052 1,052 1,052 0,959 0,959 0,959 1,411 1,411 1,411 1,274 1,274 1,274 1,485 1,485 1,485 1,348 1,348 1,348 1,674 1,674

Serie corta Short serie

€

pcs.

cod.

cad/each

pcs.

cod.

cad/each

6,25 6,3 6,4 6,5 6,6 6,7 6,75 6,8 6,9 7 7,1 7,2 7,25 7,3 7,4 7,5 7,6 7,7 7,75 7,8 7,9 8 8,1 8,2 8,25 8,3 8,4 8,5 8,6 8,7 8,75 8,8 8,9 9 9,1 9,2 9,25 9,3 9,4 9,5 9,6 9,7 9,75 9,8 9,9 10 10,25 10,5 10,75 11 11,25 11,5 11,75 12 12,25 12,5 12,75 13 13,25 13,5 13,75 14 14,25

63 63 63 63 63 63 69 69 69 69 69 69 69 69 69 69 75 75 75 75 75 75 75 75 75 75 75 75 81 81 81 81 81 81 81 81 81 81 81 81 87 87 87 87 87 87 87 87 94 94 94 94 94 101 101 101 101 101 108 108 108 108 114

101 101 101 101 101 101 109 109 109 109 109 109 109 109 109 109 117 117 117 117 117 117 117 117 117 117 117 117 125 125 125 125 125 125 125 125 125 125 125 125 133 133 133 133 133 133 133 133 142 142 142 142 142 151 151 151 151 151 160 160 160 160 169

10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3

010800625 010800630 010800640 010800650 010800660 010800670 010800675 010800680 010800690 010800700 010800710 010800720 010800725 010800730 010800740 010800750 010800760 010800770 010800775 010800780 010800790 010800800 010800810 010800820 010800825 010800830 010800840 010800850 010800860 010800870 010800875 010800880 010800890 010800900 010800910 010800920 010800925 010800930 010800940 010800950 010800960 010800970 010800975 010800980 010800990 010801000 010801025 010801050 010801075 010801100 010801125 010801150 010801175 010801200 010801225 010801250 010801275 010801300 010801325 010801350 010801375 010801400 010801425

1,674 1,518 1,518 1,518 1,717 1,717 1,717 1,685 1,685 1,685 2,255 2,255 2,255 2,064 2,064 2,064 2,422 2,422 2,422 2,223 2,223 2,223 3,338 3,338 3,338 3,033 3,033 3,033 3,581 3,581 3,581 3,233 3,233 3,233 3,761 3,761 3,761 3,403 3,403 3,403 3,981 3,981 3,981 3,614 3,614 3,614 4,560 4,149 4,751 4,382 5,129 4,635 5,519 5,192 6,026 5,718 7,753 7,005 12,419 12,419 12,756 12,756 14,705

14,5 14,75 15 15,25 15,5 15,75 16 16,5 17 17,5 18 18,5 19 19,5 20

114 114 114 120 120 120 120 125 125 130 130 135 135 140 140

169 169 169 178 178 178 178 184 184 191 191 198 198 205 205

3 3 3 3 3 3 3 1 1 1 1 1 1 1 1

010801450 010801475 010801500 010801525 010801550 010801575 010801600 010801650 010801700 010801750 010801800 010801850 010801900 010801950 010802000

14,705 17,328 17,328 18,970 18,970 19,865 19,865 22,245 23,225 25,774 26,922 26,922 28,733 31,768 32,580

107

PUNTE ELICOIDALI CILINDRICHE ELICOIDALI, QUALITA' STANDARD, CODOLO RIDOTTO, FINITURA BLACK & WHITE Standard fully ground straight shank drills with black & white finish

01082

HSS-G

DIN 338

Confezione Packaging <5 d

d d=10mm

R ≤ 650 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

01084

HSS-G

DIN 338

Packaging

d d=13mm

108

Reduced shank - 10mm €

pcs.

cod.

cad/each

10,25 10,5 10,75 11 11,25 11,5 11,75 12 12,25 12,5 12,75 13 13,25 13,5 13,75 14 14,25 14,5 14,75 15 15,25 15,5 15,75 16 16,5 17 17,5 18 18,5 19 19,5 20

87 87 94 94 94 94 94 101 101 101 101 101 101 108 108 108 114 114 114 114 120 120 120 120 125 125 130 130 135 135 140 140

133 133 142 142 142 142 142 151 151 151 151 151 151 160 160 160 169 169 169 169 178 178 178 178 184 184 191 191 198 198 205 205

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1

010821025 010821050 010821075 010821100 010821125 010821150 010821175 010821200 010821225 010821250 010821275 010821300 010821325 010821350 010821375 010821400 010821425 010821450 010821475 010821500 010821525 010821550 010821575 010821600 010821650 010821700 010821750 010821800 010821850 010821900 010821950 010822000

6,660 6,232 6,863 6,470 7,268 6,751 7,707 7,337 6,807 7,910 10,070 9,271 16,302 16,302 16,675 16,675 18,755 18,755 21,557 21,557 23,301 23,301 24,268 24,268 26,812 27,858 30,569 31,795 31,795 33,730 36,970 37,847

Codolo ridotto - 13mm

RETTIFICATA

Reduced shank- 13mm

Ground from the solid

Confezione <5 d

Codolo ridotto - 10mm

RETTIFICATA

Ground from the solid

€

pcs.

cod.

cad/each

13,25 13,5 13,75 14 14,25 14,5 14,75 15 15,25 15,5 15,75 16 16,5 17 17,5 18 18,5 19 19,5 20

101 108 108 108 114 114 114 114 120 120 120 120 125 125 130 130 135 135 140 140

151 160 160 160 169 169 169 169 178 178 178 178 184 184 191 191 198 198 205 205

13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13

3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1

010841325 010841350 010841375 010841400 010841425 010841450 010841475 010841500 010841525 010841550 010841575 010841600 010841650 010841700 010841750 010841800 010841850 010841900 010841950 010842000

16,302 16,302 16,675 16,675 18,755 18,755 21,557 21,557 23,301 23,301 24,268 24,268 26,812 27,858 30,569 31,795 31,795 33,730 36,970 37,847

PUNTE ELICOIDALI CILINDRICHE ELICOIDALI, QUALITA' STANDARD, FINITURA BLACK & WHITE Standard fully ground straight shank drills with black & white finish

01087 130°

W 27°

HSS-G

Confezione Packaging

<3 d

130°

W 27°

HV 750÷820 SPLIT POINT DIN 1412C

<8 d

HSS-G

Short serie

Ground from the solid

HV 750÷820 SPLIT POINT DIN 1412C

01086

Serie corta

DIN 1897

pcs.

cod.

3 3,25 3,5 3,75 4 4,25 4,5 4,75 5 5,25 5,5 5,75 6

16 18 20 20 22 22 24 24 26 26 28 28 28

46 49 52 52 55 55 58 58 62 62 66 66 66

10 10 10 10 10 10 10 10 10 10 10 10 10

010870300 010870325 010870350 010870375 010870400 010870425 010870450 010870475 010870500 010870525 010870550 010870575 010870600

Long serie

Ground from the solid

Packaging

0,731 0,970 0,897 1,040 0,993 1,125 1,065 1,089 1,089 1,161 1,447 1,531 1,531

Serie lunga

DIN 340

Confezione

€ cad/each

pcs.

cod.

3 3,25 3,5 3,75 4 4,25 4,5 4,75 5 5,25 5,5 5,75 6 6,5 7 7,5 8 8,5 9 9,5 10

66 69 73 73 78 78 82 82 87 87 91 91 91 97 102 102 109 109 115 115 121

100 106 112 112 119 119 126 126 132 132 139 139 139 148 156 156 165 165 175 175 184

10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5

010860300 010860325 010860350 010860375 010860400 010860425 010860450 010860475 010860500 010860525 010860550 010860575 010860600 010860650 010860700 010860750 010860800 010860850 010860900 010860950 010861000

€ cad/each

1,281 1,628 1,628 1,712 1,712 2,346 2,346 2,382 2,382 2,716 2,716 2,776 2,776 3,603 3,674 4,250 4,729 7,134 7,170 8,020 8,091

109

PUNTE ELICOIDALI CILINDRICHE, SERIE CORTA, ESECUZIONE RULLATA Rolled straight shank twist drills

01001 118°

DIN 338

HSS-R

W 27°

Rolled

Confezione Packaging

HV 750÷820

<5 d

R ≤ 650 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

Art. 01002 Self Disponibile su richiesta On demand

Per forare: tutti i metalli, ferro, acciaio etc... For drilling in: iron, steel, metals...

110

Serie corta

ESECUZIONE RULLATA

L pcs.

3 4 5 5 6 7 7 8 9 9 10 10 11 11 12 14 16 16 16 18 18 20 20 22 22 22 24 24 27 27 27 30 30 30 33 33 33 33 33 36 36 36 36 39 39 39 39 39 43 43 43 43 43 43 47 47 47 47 47 47 52 52 52

19 19 20 20 22 24 24 26 28 28 30 30 32 32 34 36 38 38 38 40 40 43 43 46 46 46 49 49 53 53 53 57 57 57 61 61 61 61 61 65 65 65 65 70 70 70 70 70 75 75 75 75 75 75 80 80 80 80 80 80 86 86 86

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

Short serie

€

cod.

cad/each

pcs.

010010030 010010035 010010040 010010045 010010050 010010055 010010060 010010065 010010070 010010075 010010080 010010085 010010090 010010095 010010100 010010110 010010120 010010125 010010130 010010140 010010150 010010160 010010170 010010175 010010180 010010190 010010200 010010210 010010220 010010225 010010230 010010240 010010250 010010260 010010270 010010275 010010280 010010290 010010300 010010310 010010320 010010325 010010330 010010340 010010350 010010360 010010370 010010375 010010380 010010390 010010400 010010410 010010420 010010425 010010430 010010440 010010450 010010460 010010470 010010475 010010480 010010490 010010500

1,313 1,165 1,165 1,165 0,963 1,165 0,963 0,937 0,813 0,813 0,813 0,850 0,888 0,850 0,539 0,539 0,539 0,539 0,501 0,501 0,376 0,426 0,426 0,426 0,426 0,426 0,389 0,437 0,437 0,437 0,437 0,437 0,420 0,500 0,500 0,500 0,500 0,500 0,460 0,539 0,539 0,539 0,539 0,539 0,501 0,613 0,613 0,613 0,613 0,613 0,549 0,688 0,688 0,688 0,688 0,688 0,613 0,786 0,786 0,786 0,786 0,786 0,712

52 52 52 52 57 57 57 57 57 57 57 57 63 63 63 63 63 63 63 63 69 69 69 69 69 69 69 69 69 69 75 75 75 75 75 75 75 75 75 75 75 75 81 81 81 81 81 81 81 81 81 81 81 81 87 87 87 87 87 87 87 87 87

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

€

cod.

cad/each

010010510 010010520 010010525 010010530 010010540 010010550 010010560 010010570 010010575 010010580 010010590 010010600 010010610 010010620 010010625 010010630 010010640 010010650 010010660 010010670 010010675 010010680 010010690 010010700 010010710 010010720 010010725 010010730 010010740 010010750 010010760 010010770 010010775 010010780 010010790 010010800 010010810 010010820 010010825 010010830 010010840 010010850 010010860 010010870 010010875 010010880 010010890 010010900 010010910 010010920 010010925 010010930 010010940 010010950 010010960 010010970 010010975 010010980 010010990 010011000 010011010 010011020 010011025

0,973 0,973 0,973 0,973 0,973 0,888 1,001 1,001 1,001 1,001 1,001 0,925 1,225 1,225 1,225 1,225 1,225 1,113 1,438 1,438 1,438 1,438 1,438 1,313 1,562 1,562 1,562 1,562 1,562 1,438 1,936 1,936 1,936 1,936 1,936 1,824 2,075 2,075 2,075 2,075 2,075 1,888 2,376 2,376 2,376 2,376 2,376 2,164 2,687 2,687 2,687 2,687 2,687 2,425 2,999 2,999 2,999 2,999 2,999 2,788 4,263 4,263 3,527

Serie corta Short serie

€

pcs.

cod.

cad/each

pcs.

cod.

cad/each

87 87 87 87 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 101 101 101 101 101 101 101 101 101 101 101 101 101 101 108 108 108 108 114 114 114 114 120 120 120 120 125 125 125 125 130 130 130 130 135 135 135 135 140 140 140 140 145 145

133 133 133 133 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 151 151 151 151 151 151 151 151 151 151 151 151 151 151 160 160 160 160 169 169 169 169 178 178 178 178 184 184 184 184 191 191 191 191 198 198 198 198 205 205 205 205 213 213

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

010011030 010011040 010011050 010011060 010011070 010011075 010011080 010011090 010011100 010011110 010011120 010011125 010011130 010011140 010011150 010011160 010011170 010011175 010011180 010011190 010011200 010011210 010011220 010011225 010011230 010011240 010011250 010011260 010011270 010011275 010011280 010011290 010011300 010011325 010011350 010011375 010011400 010011425 010011450 010011475 010011500 010011525 010011550 010011575 010011600 010011625 010011650 010011675 010011700 010011725 010011750 010011775 010011800 010011825 010011850 010011875 010011900 010011925 010011950 010011975 010012000 010012050 010012100

4,263 4,263 3,213 4,874 4,874 4,088 4,874 4,874 3,687 5,300 5,300 4,413 5,300 5,300 4,000 5,664 5,664 4,725 5,664 5,664 4,325 6,214 6,214 5,176 6,214 6,214 4,738 6,513 6,513 5,436 6,513 6,513 5,025 7,338 6,801 7,338 6,801 8,313 7,614 10,849 9,864 12,212 11,101 13,414 12,201 15,525 12,901 15,525 12,901 16,850 14,039 16,850 15,427 19,765 16,463 19,765 16,463 23,051 19,239 23,051 19,239 21,802 23,815

21,5 22 22,5 23 23,5 24 24,5 25

150 150 150 155 155 160 160 160

221 221 221 229 229 236 236 236

1 1 1 1 1 1 1 1

010012150 010012200 010012250 010012300 010012350 010012400 010012450 010012500

25,654 26,839 27,353 29,551 35,153 36,040 36,616 37,491

111

PUNTE ELICOIDALI CILINDRICHE CON CODOLO RIDOTTO, ESECUZIONE RULLATA Reduced shank twist drills

01003

HSS-R

DIN 338 Rolled

Confezione Packaging <5 d

d d=10mm

R ≤ 650 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

Art. 01005 Self Disponibile su richiesta On demand

112

Codolo ridotto - 10mm

ESECUZIONE RULLATA

Reduced shank - 10mm €

pcs.

cod.

cad/each

10,25 10,5 10,75 11 11,25 11,5 11,75 12 12,25 12,5 12,75 13 13,25 13,5 13,75 14 14,25 14,5 14,75 15 15,25 15,5 15,75 16 16,25 16,5 16,75 17 17,25 17,5 17,75 18 18,25 18,5 18,75 19 19,25 19,5 19,75 20

87 87 94 94 94 94 94 101 101 101 101 101 108 108 108 108 114 114 114 114 120 120 120 120 125 125 125 125 125 130 130 130 130 135 135 135 135 140 140 140

133 133 142 142 142 142 142 151 151 151 151 151 160 160 160 160 169 169 169 169 178 178 178 178 184 184 184 184 184 191 191 191 191 198 198 198 198 205 205 205

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

010031025 010031050 010031075 010031100 010031125 010031150 010031175 010031200 010031225 010031250 010031275 010031300 010031325 010031350 010031375 010031400 010031425 010031450 010031475 010031500 010031525 010031550 010031575 010031600 010031625 010031650 010031675 010031700 010031725 010031750 010031775 010031800 010031825 010031850 010031875 010031900 010031925 010031950 010031975 010032000

5,369 4,537 6,039 5,015 6,392 5,308 6,746 5,636 7,251 6,065 7,821 6,506 10,107 8,401 10,107 8,401 10,891 9,361 12,494 11,498 14,402 12,584 14,402 13,859 16,764 14,580 16,764 14,580 18,054 15,705 18,054 15,705 20,835 18,117 20,835 18,117 23,967 20,835 23,967 20,835

PUNTE ELICOIDALI CILINDRICHE CON CODOLO RIDOTTO, ESECUZIONE RULLATA Reduced shank twist drills

01004

HSS-R

DIN 338 Rolled

Confezione Packaging <5 d

d d=13 mm

R ≤ 650 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

Codolo ridotto - 13mm

ESECUZIONE RULLATA

Reduced shank - 13mm €

pcs.

cod.

cad/each

13,25 13,5 13,75 14 14,25 14,5 14,75 15 15,25 15,5 15,75 16 16,25 16,5 16,75 17 17,25 17,5 17,75 18 18,25 18,5 18,75 19 19,25 19,5 19,75 20 20,5 21 21,5 22 22,5 23 23,5 24 24,5 25

108 108 108 108 114 114 114 114 120 120 120 120 125 125 125 125 130 130 130 130 135 135 135 135 140 140 140 140 145 145 150 150 150 155 155 160 160 160

160 160 160 160 169 169 169 169 178 178 178 178 184 184 184 184 191 191 191 191 198 198 198 198 205 205 205 205 213 213 221 221 221 229 229 236 236 236

13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13

3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

010041325 010041350 010041375 010041400 010041425 010041450 010041475 010041500 010041525 010041550 010041575 010041600 010041625 010041650 010041675 010041700 010041725 010041750 010041775 010041800 010041825 010041850 010041875 010041900 010041925 010041950 010041975 010042000 010042050 010042100 010042150 010042200 010042250 010042300 010042350 010042400 010042450 010042500

10,107 8,401 10,107 8,401 10,891 9,361 12,494 11,498 14,402 12,584 14,402 13,859 16,764 14,580 16,764 14,580 18,054 15,705 18,054 15,705 20,835 18,117 20,835 18,117 23,967 20,835 23,967 20,835 28,793 31,003 33,025 34,326 34,882 37,322 43,462 44,423 45,065 46,039

Art. 01005 Self Disponibile su richiesta On demand

113

PUNTE ELICOIDALI CILINDRICHE SERIE EXTRA CORTA, ESECUZIONE RULLATA Straight shank twist drills-stub serie

01018 118°

HSS-R

W 27°

HV 750÷820

<3 d

R ≤ 650 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

Art. 01019 Self Disponibile su richiesta On demand

114

DIN 1897 Rolled

Confezione Packaging

Serie extra corta

ESECUZIONE RULLATA

Extra short serie

pcs.

cod.

2 2,2 2,25 2,5 2,75 2,8 3 3,2 3,25 3,3 3,5 3,75 3,8 4 4,2 4,25 4,5 4,75 4,8 5 5,2 5,25 5,5 5,75 5,8 6 6,5 7 7,5 8 8,5 9 9,5 10

12 13 13 14 16 16 16 18 18 18 20 20 22 22 22 22 24 24 26 26 26 26 28 28 28 28 31 34 34 37 37 40 40 43

38 40 40 43 46 46 46 49 49 49 52 52 55 55 55 55 58 58 62 62 62 62 66 66 66 66 70 74 74 79 79 84 84 89

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5

010180200 010180220 010180225 010180250 010180275 010180280 010180300 010180320 010180325 010180330 010180350 010180375 010180380 010180400 010180420 010180425 010180450 010180475 010180480 010180500 010180520 010180525 010180550 010180575 010180580 010180600 010180650 010180700 010180750 010180800 010180850 010180900 010180950 010181000

€ cad/each

0,516 0,542 0,542 0,542 0,556 0,556 0,556 0,632 0,632 0,632 0,632 0,697 0,697 0,697 0,824 0,824 0,824 0,955 0,955 0,955 1,186 1,186 1,186 1,201 1,201 1,201 1,575 1,781 2,037 2,593 2,942 3,432 3,728 4,657

PUNTE ELICOIDALI CILINDRICHE SERIE LUNGA, ESECUZIONE RULLATA Straight shank twist drills, long serie

01020 118°

DIN 340

HSS-R

W 27°

Rolled

Confezione Packaging

HV 750÷820

<8 d

R ≤ 650 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

Art. 01021 Self Disponibile su richiesta On demand

Per forare: tutti i metalli, ferro, acciaio etc... For drilling in: iron, steel, metals...

Serie lunga

ESECUZIONE RULLATA

Long serie €

pcs.

cod.

cad/each

1,5 1,75 2 2,2 2,25 2,5 2,75 2,8 3 3,2 3,25 3,5 3,75 3,8 4 4,2 4,25 4,5 4,75 4,8 5 5,2 5,25 5,5 5,75 5,8 6 6,25 6,5 6,75 7 7,25 7,5 7,75 8 8,25 8,5 8,75 9 9,25 9,5 9,75 10 10,5 11 11,5 12 12,5 13 13,5 14 14,5 15 15,5 16 17 18 19 20

45 53 56 59 59 62 66 66 66 69 69 73 73 78 78 78 78 82 82 87 87 87 87 91 91 91 91 97 97 97 102 102 102 109 109 109 109 115 115 115 115 121 121 121 128 128 134 134 134 140 140 144 144 149 149 154 158 162 166

70 80 85 90 90 95 100 100 100 106 106 112 112 119 119 119 119 126 126 132 132 132 132 139 139 139 139 148 148 148 156 156 156 165 165 165 165 175 175 175 175 184 184 184 195 195 205 205 205 214 214 220 220 227 227 235 241 247 254

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 1 1 1 1

010200150 010200175 010200200 010200220 010200225 010200250 010200275 010200280 010200300 010200320 010200325 010200350 010200375 010200380 010200400 010200420 010200425 010200450 010200475 010200480 010200500 010200520 010200525 010200550 010200575 010200580 010200600 010200625 010200650 010200675 010200700 010200725 010200750 010200775 010200800 010200825 010200850 010200875 010200900 010200925 010200950 010200975 010201000 010201050 010201100 010201150 010201200 010201250 010201300 010201350 010201400 010201450 010201500 010201550 010201600 010201700 010201800 010201900 010202000

1,954 1,515 1,515 1,608 1,608 1,608 1,648 1,648 1,648 1,915 1,915 1,915 2,100 2,100 2,100 2,485 2,485 2,485 2,647 2,647 2,647 3,311 3,311 3,311 3,565 3,565 3,565 4,282 4,282 5,027 5,027 5,411 5,411 6,077 6,077 6,649 6,649 7,075 7,075 7,195 7,195 8,313 8,313 10,653 11,491 11,902 13,020 13,485 15,319 22,356 22,356 23,806 29,325 30,614 33,341 39,963 43,953 48,461 54,406

115

POLLICI INCHES

PUNTE HSS RULLATE IN POLLICI

HSS roll-forged straight shank twist drills-jobber’s length

01030 118°

W 27°

Short serie - Inches

Rolled

Confezione Packaging

HV 750÷820

<5 d

R ≤ 650 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

Per forare: tutti i metalli, ferro, acciaio etc... For drilling in: iron, steel, metals...

116

Serie corta - Pollici

ANSI B94 ESECUZIONE RULLATA

HSS-R

Ø inch

Ø mm

l inch

L inch

pcs.

cod.

1/64 1/32 3/64 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2 33/64 17/32 35/64 9/16 37/64 19/32 39/64 5/8 11/16 3/4

0,40 0,79 1,19 1,59 1,98 2,38 2,78 3,17 3,57 3,97 4,37 4,76 5,16 5,56 5,95 6,35 6,75 7,14 7,54 7,94 8,33 8,73 9,13 9,52 9,92 10,32 10,72 11,11 11,51 11,91 12,30 12,70 13,00 13,50 14,00 14,30 14,70 15,00 15,50 16,00 17,50 19,00

13/64 13/32 5/8 7/8 1” 1-1/4 1-1/2 1-5/8 1-3/4 2” 2-1/8 2-5/16 2-7/16 2-1/2 2-5/8 2-3/4 2-7/8 2-15/16 3-1/16 3-3/16 3-5/16 3-7/16 3-1/2 3-5/8 3-3/4 3-7/8 3-15/16 4-1/16 4-3/16 4-5/16 4-7/16 4-1/2 4-13/16 4-13/16 4-13/16 4-13/16 4-13/16 5-3/16 5-3/16 5-3/16 5-3/16 5-5/16

7/8 1-1/4 1-3/4 1-7/8 2” 2-1/4 2-5/8 2-3/4 2-7/8 3-1/8 3-1/4 3-1/2 3-5/8 3-3/4 3-7/8 4” 4-1/8 4-1/4 4-3/8 4-1/2 4-5/8 4-3/4 4-7/8 5” 5-1/8 5-1/4 5-3/8 5-1/2 5-5/8 5-3/4 5-7/8 6” 6-5/8 6-5/8 6-5/8 6-5/8 6-5/8 7-1/8 7-1/8 7-1/8 7-1/8 7-3/8

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 1 1

0103011 0103012 0103013 0103014 0103015 0103016 0103017 0103018 0103019 0103020 0103021 0103022 0103023 0103024 0103025 0103026 0103027 0103028 0103029 0103030 0103031 0103032 0103033 0103034 0103035 0103036 0103037 0103038 0103039 0103040 0103041 0103042 0103043 0103044 0103045 0103046 0103047 0103048 0103049 0103050 0103054 0103058

€ cad/each

0,917 0,917 0,917 0,358 0,373 0,384 0,424 0,440 0,533 0,600 0,612 0,718 0,797 0,904 0,933 1,053 1,304 1,449 1,543 1,902 2,022 2,287 2,406 2,446 3,073 3,179 3,272 3,631 3,684 4,415 4,602 4,788 5,652 5,812 6,412 7,035 8,338 9,602 10,638 11,637 14,562 16,636

POLLICI INCHES

PUNTE HSS RULLATE IN POLLICI CON CODOLO RIDOTTO

Reduced shank HSS roll-forged straight shank twist drills-jobber’s length

01034

Codolo ridotto - Pollici 1/2"

SILVER&DEMING ANSI B94 ESECUZIONE FRESATA

HSS

Reduced shank - Inches 1/2"

Milled Confezione Packaging

<5 d

d d=1/2”

Ø inch

Ø mm

l inch

L inch

pcs.

cod.

cad/each

€

17/32 9/16 19/32 5/8 21/32 11/16 23/32 3/4 25/32 13/16 27/32 7/8 29/32 15/16 31/32 1” 1.3/32 1.1/8 1.1/4 1.3/8 1.1/2

13,50 14,30 15,00 16,00 16,70 17,50 18,25 19,00 20,00 20,50 21,50 22,25 23,00 24,00 24,50 25,40 27,75 28,50 31,75 35,00 38,00

3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8

6” 6” 6” 6” 6” 6” 6” 6” 6” 6” 6” 6” 6” 6” 6” 6” 6” 6” 6” 6” 6”

1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

0103402 0103404 0103406 0103408 0103410 0103412 0103414 0103416 0103418 0103420 0103422 0103424 0103426 0103428 0103430 0103432 0103438 0103440 0103448 0103456 0103464

13,415 13,599 15,385 15,594 16,807 18,343 19,557 21,279 22,596 24,863 26,624 29,701 33,092 35,502 39,141 41,854 50,718 51,619 84,422 106,796 159,784

R ≤ 650 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

Per forare: tutti i metalli, ferro, acciaio etc... For drilling in: iron, steel, metals...

117

PUNTE PER OTTONE E PER MATERIALI A TRUCIOLO CORTO, SERIE CORTA Fully ground twist drills for brass

01091 118°

H 20°

<5 d

R ≤ 650 N/mm2

Applicazioni Applications

Ottone Brass

Truciolo corto Short chip

Emulsione Lubrificant

HSS-G

DIN 338

Confezione Packaging

Special for brass

Ø h8

pcs.

cod.

1 1,5 2 2,25 2,5 2,75 3 3,25 3,5 3,75 4 4,25 4,5 4,75 5 5,25 5,5 5,75 6 6,25 6,5 6,75 7 7,5 7,75 8 8,25 8,5 8,75 9 9,25 9,5 9,75 10 10,5 11 11,5 12 12,5 13

12 18 24 27 30 33 33 36 39 39 43 43 47 47 52 52 57 57 57 63 63 69 69 69 75 75 75 75 81 81 81 81 87 87 87 94 94 101 101 101

34 40 49 53 57 61 61 65 70 70 75 75 80 80 86 86 93 93 93 101 101 109 109 109 117 117 117 117 125 125 125 125 133 133 133 142 142 151 151 151

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

010910100 010910150 010910200 010910225 010910250 010910275 010910300 010910325 010910350 010910375 010910400 010910425 010910450 010910475 010910500 010910525 010910550 010910575 010910600 010910625 010910650 010910675 010910700 010910750 010910775 010910800 010910825 010910850 010910875 010910900 010910925 010910950 010910975 010911000 010911050 010911100 010911150 010911200 010911250 010911300

20°

Materiale duro Hard material Alto sforzo di taglio High cutting strenght

118

Speciale per ottone

RETTIFICATA

Ground from the solid

€ cad/each

4,471 3,966 3,966 4,540 4,049 4,906 4,460 5,398 4,906 5,867 5,317 7,264 6,430 7,345 6,607 9,363 8,917 9,363 8,508 11,204 10,199 11,394 10,362 15,208 16,938 16,260 16,502 15,249 17,242 15,761 17,972 17,242 19,077 17,595 21,404 26,004 30,530 33,377 34,745 34,745

PUNTE PER ALLUMINIO E PER MATERIALI A TRUCIOLO LUNGO, SERIE CORTA Fully ground twist drills for light alloys

01092 135°

W 35°

<5 d

R ≤ 650 N/mm2

Applicazioni Applications

Alu

Alluminio Aluminum

Truciolo lungo Long chip

HSS-G

DIN 338

Speciale per alluminio

RETTIFICATA

Special for alluminium

Ground from the solid

Confezione Packaging

Ø h8

pcs.

cod.

1 1,5 2 2,25 2,5 2,75 3 3,2 3,25 3,5 3,75 4 4,2 4,25 4,5 4,75 5 5,2 5,25 5,5 5,75 6 6,25 6,5 6,75 7 7,25 7,5 7,75 8 8,25 8,5 8,75 9 9,25 9,5 9,75 10 10,5 11 11,5 12 12,5 13

12 18 24 27 30 33 33 36 36 39 39 43 43 43 47 47 52 52 52 57 57 57 63 63 69 69 69 69 75 75 75 75 81 81 81 81 87 87 87 94 94 101 101 101

34 40 49 53 57 61 61 65 65 70 70 75 75 75 80 80 86 86 86 93 93 93 101 101 109 109 109 109 117 117 117 117 125 125 125 125 133 133 133 142 142 151 151 151

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

010920100 010920150 010920200 010920225 010920250 010920275 010920300 010920320 010920325 010920350 010920375 010920400 010920420 010920425 010920450 010920475 010920500 010920520 010920525 010920550 010920575 010920600 010920625 010920650 010920675 010920700 010920725 010920750 010920775 010920800 010920825 010920850 010920875 010920900 010920925 010920950 010920975 010921000 010921050 010921100 010921150 010921200 010921250 010921300

€ cad/each

4,471 3,966 3,966 4,540 4,049 4,906 4,460 5,398 5,398 4,906 5,867 5,317 7,264 7,264 6,430 7,345 6,607 9,363 9,363 8,917 9,363 8,508 11,204 10,199 11,394 10,362 15,208 16,158 17,996 17,277 17,532 16,203 18,320 16,746 19,095 18,320 20,270 18,696 22,742 27,629 32,437 35,464 36,916 36,916

3 5°

Alta evacuazione del truciolo High chips removal Materiale duttile Soft material Basso sforzo di taglio Low cutting strenght

119

ASSORTIMENTI DI PUNTE PER METALLO: UN FORMATO PER OGNI ESIGENZA Metal cutting twist drills assortments: one size for every need Per ciascuna tipologia di punta sono disponibili diverse tipologie e dimensioni di assortimenti: individua il più adatto alla tue esigenze e consulta la visione d'insieme alla pagina successiva.

Different types and sizes of assortments are available for each type of twist drill: identify the most suitable for your needs and consult the overview on the next page.

SELETTORE IN PLASTICA PLASTIC SELECTOR

Contenitore in plastica di forma cilindrica, permette una pratica organizzazione delle punte per diametro. Disponibile solo per le punte rullate. Cylindrical plastic box, allows a practical organization of the twist drills by diameter. Only available for rolled twist drills. n. pezzi No. pieces

Range ø punte Drill bit ø range

Passo (mm) Passo (mm)

1÷10

0,5

SLIM LINE SLIM LINE

Astucci in PPT compatti e leggeri, grazie alla profilo estremamente sottile sono la scelta ideale per l’allestimento di assortimenti a libero servizio. Disponibili i 4 diversi assortimenti con i diametri ed i passi di maggiore utilizzo. Compact and light PPT boxes, thanks to the extremely thin profile, are the ideal choice for the set-up of self-service assortments. Available in 4 different assortments with the most commonly used diameters and pitches. n. pezzi No. pieces

Range ø punte Drill bit ø range

Passo (mm) Passo (mm)

6 10 13 13

2÷8 1÷10 2÷8 1,5÷6,5

1 1 0,5 0,5 + prefori

BOX ABS ABS BOX

Box in ABS resistente agli urti, appendibili, proteggono le punte da polvere ed umidità, sono la scelta preferita dai professionisti per custodire i loro migliori assortimenti. Disponibili in due diverse dimensioni per assortimenti completi di interi e mezzi. Shock-resistant ABS boxes, hangable, protect the twist drills from dust and humidity, they are the preferred choice by professionals to keep their best assortments. Available in two different sizes with whole numbers and fractions.

120

n. pezzi No. pieces

Range ø punte Drill bit ø range

Passo (mm) Passo (mm)

19 25

1÷10 1÷13

0,5 0,5

BOX IN METALLO Box in metallo, appendibili, con pratica finestrella che rende visibili gli utensili contenuti, permettono di tenere organizzate le punte per diametro per una pratica e veloce individuazione. Disponibili in un’ampia scelta di assortimenti completi di interi, mezzi e decimali. Metal box, hangable, with a practical window that makes the tools contained visible, allowing you to keep the twist drills organized by diameter for practical and quick identification. Available in a wide choice of complete assortments of whole numbers, fractions and decimals. n. pezzi No. pieces

Range ø punte Drill bit ø range

Passo (mm) Passo (mm)

19 25 37 49 51 41

1÷10 1÷13 1÷10 1÷13 1÷6 6÷10

0,5 0,5 0,25 0,25 0,1 0,1

VALIGETTA IN METALLO METAL BOX

Valigetta in metallo con scoparti interni, permettono una funzionale e pratica organizzazione di una grande quantità di punte, preservandole da polvere ed umidità. Disponibili in due diversi assortimenti, il numero di pezzi contenuti varia in base alla tipologia di punta contenuta. Metal case with internal compartments, they allow a functional and practical organization of a large one number of twist drills, preserving them from dust and humidity. Available in two different assortments, the number of pieces contained varies according to the type of twist drill contained. Dimensioni Dimensions

330x240x55 mm

n. pezzi No. pieces

Range ø punte Drill bit ø range

Passo (mm) Passo (mm)

116 + 128 +

1÷10 1÷13

0,5 0,5

ESPOSITORI DA BANCO IN METALLO METAL DISPLAYS

Espositori in metallo ideali per l’esposizione a banco di una gamma completa di punte. Il crowner personalizzato per ciascuna linea permette di comunicare il modo intuitivo la tipologia di punta contenuta e le sue principali caratteristiche tecniche. Disponibile in versione compatta, per assortimenti con passo 0,5 mm, o in versione grande per assortimenti completi con passo 0,25 mm. Il numero di pezzi contenuti varia in base alla tipologia di punta scelta.

Dimensioni versione compatta Compact version Dimensions

375x240x200 mm Dimensioni versione estesa Extended version Dimensions

390x460x230 mm Apertura solo frontale Front only opening

Metal displays ideal to show a complete range of drill bits. The personalized crowner for each line allows you to intuitively communicate the type of twist drills contained and its main ones technical features. Available in compact version, for assortments with 0.5 mm pitch, or in version large for complete sets with 0.25 mm pitch. The number of pieces contained varies according to the chosen type of twist drill. n. pezzi No. pieces

Range ø punte Drill bit ø range

Passo (mm) Passo (mm)

168 + 240 +

1÷13 1÷13

0,5 0,25

ESPOSITORI DA BANCO IN PLASTICA PLASTIC DISPLAYS

Espositori da banco in plastica per l’esposizione a banco di una gamma completa di punte con passo 0,5 mm. Il crowner personalizzato per ciascuna linea permette di comunicare il modo intuitivo la tipologia di punta contenuta e le sue principali caratteristiche tecniche. In base alla tipologia di punta varia il numero di pezzi contenuti. Plastic displays to show a complete range of 0.5 mm pitch twist drills. The personalized crowner for each line allows you to intuitively communicate the type of twist drill contained and its main technical characteristics. The number of pieces varies according to the chosen type of twist drill. Dimensioni Dimensions

400x345x210 mm

n. pezzi No. pieces

Range ø punte Drill bit ø range

Passo (mm) Passo (mm)

168 +

1÷13

0,5

121

VISIONE D'INSIEME / OVERVIEW

METAL BOX

VISIONE D'INSIEME: ASSORTIMENTI PUNTE PER METALLO, SERIE CORTA DIN 338 Overview: DIN 338 short serie twist drills assortments

N° PCS.

GAMMA/RANGE Ø

2÷8

1÷10

2÷8

1.5÷6,5

PASSO/PITCH (mm)

0,5

0,5 + PREFORI

SLIM

IMAGE

IMMAGINE

CODE

CODICE PUNTA

COATING

RIVESTIMENTO

MATERIAL

MATERIALE

MATERIALE / MATERIAL

COD.

€

COD.

€

COD.

€

COD.

€

HM HSS

01093

01068208 (5 pcs)

94,502 €

Co8% AISI M42

01120

01135204

30,995 €

01135201

68,720 €

01135205

67,374 €

01135203

47,165 €

TiAlN

01300

TiAlN

01305

01140

01139

01145

01155204

22,460 €

01155201

51,326 €

01155205

48,765 €

01155203

34,645 €

01157

01220

01229201

50,500 €

01229205

47,500 €

01401

TiN

01320

TiN

Co5% AISI M35

HSS-G AISI M2

01402204

23,000 €

01402201

49,800 €

01402205

47,250 €

01160

01170204

19,032 €

01170201

36,742 €

01170205

35,325 €

01170203

24,093 €

01201

01205204

18,950 €

01205201

36,500 €

01205205

35,000 €

01205203

23,900 €

01060

01068204

18,500 €

01068201

34,694 €

01068205

34,000 €

01068202

23,000 €

01090 sx

01068209

29,750 €

01068207

45,000 €

01070

01075204

17,500 €

01075203

22,500 €

01115

01079

01068700 (5 pcs)

22,948 €

01016203

10,089 €

01068203

79,500 €

01075201

33,133 €

01075205

32,800 €

01066

01068211

41,000 €

01068215

38,900 €

01350

01360201

25,958 €

01360205

25,400 €

01080

01085201

21,640 €

01085205

21,300 €

01001

01016201 (HSS) 09010231 (9 pcs HSS+W) 09013232 (9 pcs HSS+W+W.S)

13,926 € 11,500 €

01016205

13,789 €

01030

01040202

12,126 €

01091

01068216

105,000 €

01092

HSS-G

HSS-R

01016204

8,098 €

11,708 €

SPECIAL

122

1÷10

1÷13

1÷10

1÷13

0,5

SLIM

SELETTORE

COD.

01016206

€

19,163 €

COD.

01016101 HSS 09001102 HSS+W 09005105 MIX

0,5

ABS

€

METAL

COD.

€

COD.

€

01135301

121,267 €

01135302

266,802 €

01310301

216,839 €

01310302

393,763 €

01310305

277,144 €

01310306

503,860 €

01142401

154,503 €

01142402

328,563 €

01155303

135,093 €

01155304

311,105 €

01155301

88,547 €

01155302

177,094 €

01159401

105,766 €

01159402

265,119 €

01229301

92,394 €

01229302

191,391 €

01402301

90,542 €

01402302

187,562 €

01170311

105,007 €

01170312

210,917 €

01170301

54,792 €

01170302

122,475 €

01205301

62,230 €

01205302

129,019 €

01068301

56,681 €

01068302

114,551 €

01068307

143,848 €

01068308

307,359 €

01075301

57,259 €

01075302

113,452 €

01118401

64,060 €

01118402

141,008 €

01068311

54,673 €

01068312

117,169 €

17,893 € 17,512 € 18,084 €

01040401 (21 PCS)

29,433 €

01040402 (29 PCS)

COD.

€

COD.

€

01068401

55,567 €

01068402

110,258 €

01075401

53,984 €

01075402

103,998 €

01360401

40,173 €

01360402

70,286 €

01085401

33,802 €

01085402

60,843 €

01016401

25,192 €

01016402

44,080 €

59,994 €

123

VISIONE D'INSIEME: ASSORTIMENTI PUNTE PER METALLO, SERIE CORTA DIN 338 Overview: DIN 338 short serie twist drills assortments

N° PCS.

GAMMA/RANGE Ø

1÷10

1÷13

1÷6

6÷10

PASSO/PITCH (mm)

0,25

0,1

METAL

IMAGE

IMMAGINE

CODE

CODICE PUNTA

COATING

RIVESTIMENTO

MATERIAL

MATERIALE

MATERIALE / MATERIAL

COD.

€

COD.

€

COD.

€

COD.

€

01135411

275,904 €

01135412

614,702 €

01135403

220,980 €

01135404

665,644 €

01155411

180,176 €

01155412

391,530 €

01155403

134,748 €

01155404

365,743 €

01229411

176,416 €

01229412

374,408 €

HM HSS

01093

Co8% AISI M42

01120

TiAlN

01300

TiAlN

01305

01140

01139

01145

01157

01220

01401

TiN

01320

TiN

01160

01170411

142,083 €

01170412

289,378 €

01170407

82,402 €

01170408

252,966 €

01201

01205411

142,605 €

01205412

285,199 €

01205404

81,862 €

01205405

251,871 €

01060

01068411

135,575 €

01068412

271,152 €

01068404

78,634 €

01068405

228,968 €

01090 sx

01070

01075411

135,575 €

01075412

271,152 €

01075407

75,470 €

01075408

219,810 €

01115

01079

01066

01068413

124,458 €

01068414

268,454 €

01068422

62,000 €

01068423

195,000 €

01350

01360411

98,838 €

01360412

181,861 €

01360407

50,500 €

01360408

125,800 €

01080

01085411

92,214 €

01085412

163,611 €

01085407

45,000 €

01085408

110,000 €

01001

01016411

71,396 €

01016412

114,936 €

01016407

41,243 €

01016408

98,709 €

01030

01091

01092

Co5% AISI M35

HSS-G AISI M2

HSS-G

HSS-R

SPECIAL

124

128+

168+

240+

128+

1÷10

1÷13

0,5

0,25

DETTAGLIO COMPOSIZIONE

116+

0,5

METAL

ABS

COD.

€

COD.

€

COD.

€

COD.

€

COD.

€

01135450 (116 pcs)

550,000 €

01135451 (148 pcs)

1.010,000 €

01135501 (168 pcs)

1.500,000€

01135507 (240 pcs)

2.025,000€

01135510 (128 pcs)

925,000 €

01310452 (71 pcs)

860,000 €

01142450 (116 pcs)

550,000 €

01155454 (116 pcs)

471,000 €

01155450 (116 pcs)

372,000 €

01155451 (148 pcs)

659,000 €

01155501 (168 pcs)

955,000 €

01155507 (255 pcs)

1.514,000€

01155510 (128 pcs)

604,000 €

01229450 (116 pcs)

386,000 €

01229451 (148 pcs)

647,000 €

01229501 (168 pcs)

942,000 €

01229502 (240 pcs)

1.285,000€

01229510 (168 pcs)

919,000 €

01402450 (116 pcs)

370,000 €

01402451 (148 pcs)

623,000 €

01402501 (168 pcs)

898,000 €

01402510 (168 pcs)

876,000 €

01170452 (116 pcs)

372,000 €

01170450 (116 pcs)

305,000 €

01170451 (148 pcs)

520,000 €

01170501 (168 pcs)

745,000 €

01170507 (255 pcs)

1.168,000€

01170510 (158 pcs)

713,000 €

01205450 (150 pcs)

485,000 €

01205451 (188 pcs)

799,000 €

01205501 (540 pcs)

1.650,000€

01205507 (700 pcs)

2.160,000€

01205510 (168 pcs)

640,000 €

01068450 (150 pcs)

393,000 €

01068451 (188 pcs)

653,000 €

01068501 (600 pcs)

1.468,000€

01068507 (760 pcs)

1.857,000€

01068510 (168 pcs)

616,000 €

01075450 (150 pcs)

382,000 €

01075451 (188 pcs)

555,000 €

01075501 (600 pcs)

1.425,000€

01075507 (760 pcs)

1.800,000€

01075510 (168 pcs)

598,000 €

01068460 (150pcs)

330,000 €

01360450 (150 pcs)

222,000 €

01360451 (188 pcs)

367,000 €

01360502 (600 pcs)

833,000 €

01360507 (760 pcs)

1.045,000€

01085450 (150 pcs)

200,000 €

01085451 (188 pcs)

350,000 €

01085501 (720 pcs)

830,000 €

01085507 (900 pcs)

1.200,000€

01016450 (150 pcs)

145,000 €

01016451 (188 pcs)

260,000 €

01016501 (880 pcs)

613,000 €

01016507 (1110 pcs)

1.025,000€

01016510 (610 pcs)

499,000 €

125

COMPOSIZIONE ASSORTIMENTI IN VALIGETTA ED ESPOSITORI DA BANCO Composition of metal cases and displays

VALIGETTA IN METALLO METAL CASE 1÷10 x 0,5 mm Misure: 330x240x55 mm Measures: 330x240x55 mm

COD ART. 01135450 01310452 01155454 01142450 01155450 01229450 01402450 01170452 01170450 01205450 01068450 01075450 01068460 01360450 01085450 01016450

pcs.

1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6 6,5 7 7,5 8 8,5 9 9,5 10

10 10 10 10 10 10 10 10 10 3 3 3 3 3 3 2 2 2 2

5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 2 2 2 2

10 10 10 10 10 10 10 10 10 3 3 3 3 3 3 2 2 2 2

10 10 10 10 20 10 10 10 10 5 5 5 5 5 5 5 5 5 5

tot. pcs.

116

150

VALIGETTA IN METALLO METAL CASE 1÷13 x 0,5 mm Misure: 550x310x55 mm Measures: 550x310x55 mm

ESPOSITORE IN METALLO METAL DISPLAY 1÷13 x 0,5 mm Misure: 375x240x200 mm Measures: 375x240x200 mm

126

COD ART. 01135451 01155451 01229451 01402451 01170451 01205451 01068451 01075451 01360451 01085451 01016451 Ø 1 1,5 2 2,5 3 3,3 3,5 4 4,2 4,5 5 5,5 6 6,5 7 7,5 8 8,5 9 9,5 10 10,5 11 11,5 12 12,5 13 tot. pcs.

pcs. 10 10 10 10 10 10 10 10 10 10 10 3 3 3 3 3 3 2 2 2 2 2 2 2 2 2 2 148

pcs. 10 10 10 10 20 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 188

COD ART. 01135501 01155501 01229501 01402501 01170501 01205501 01068501 01075501 01360502 01085501 01016501 Ø 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6 6,5 7 7,5 8 8,5 9 9,5 10 10,5 11 11,5 12 12,5 13 tot. pcs.

pcs. 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 3 3 3 3 3 3 168

pcs. 30 30 50 50 80 50 80 30 30 10 20 5 5 5 10 5 5 5 10 5 5 5 5 5 5 540

pcs. 30 30 50 50 100 50 100 30 30 20 20 10 10 5 10 5 5 5 10 5 5 5 5 5 5 600

pcs. 30 30 50 70 100 70 100 50 50 30 40 10 10 5 20 5 5 5 10 5 5 5 5 5 5 720

pcs. 50 100 100 100 150 100 100 30 30 10 20 10 10 5 10 5 5 5 10 5 5 5 5 5 5 880

ESPOSITORE IN METALLO METAL DISPLAY 1÷13 x 0,25 mm Misure: 390x460x230 mm Measures: 390x460x230 mm

ESPOSITORE IN PLASTICA PLASTIC DISPLAY 1÷13 x 0,5 mm Misure: 400X345X210 mm Measures: 400X345X210 mm

COD ART. 01135507 01155507 01229502 01170507 01205507 01068507 01075507 01360507 01085507 01016507 Ø 1 1,25 1,5 1,75 2 2,25 2,5 2,75 3 3,25 3,5 3,75 4 4,25 4,5 4,75 5 5,25 5,5 5,75 6 6,25 6,5 6,75 7 7,25 7,5 7,75 8 8,25 8,5 8,75 9 9,25 9,5 9,75 10 10,25 10,5 10,75 11 11,25 11,5 11,75 12 12,25 12,5 12,75 13 tot. pcs.

pcs. 10 5 10 5 10 5 10 5 10 10 10 10 10 10 10 3 10 3 10 2 10 2 5 2 5 2 5 2 5 2 3 2 3 2 3 2 3 2 2 2 2 2 2 2 2 2 2 2 2 240

COD ART. Ø 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6 6,5 7 7,5 8 8,5 9 9,5 10 10,5 11 11,5 12 12,5 13 tot. pcs.

pcs. 10 5 10 5 10 5 10 5 10 10 10 10 10 10 10 3 10 3 10 3 10 2 5 2 5 2 5 2 5 2 5 2 5 2 5 2 5 2 3 2 3 2 3 2 3 2 3 2 3 255

pcs. 10 5 10 5 10 5 10 5 10 10 10 10 10 10 10 3 10 3 10 2 10 2 5 2 5 2 5 2 5 2 3 2 3 2 3 2 3 2 2 2 2 2 2 2 2 2 2 2 2 240

pcs. 10 5 10 5 10 5 10 5 10 10 10 10 10 10 10 3 10 3 10 3 10 2 5 2 5 2 5 2 5 2 5 2 5 2 5 2 5 2 3 2 3 2 3 2 3 2 3 2 3 255

pcs. 20 10 30 10 40 10 50 10 100 10 50 10 60 10 50 10 40 5 30 5 30 3 20 2 5 2 5 2 10 2 5 2 5 2 5 2 10 2 3 2 3 2 2 2 3 2 2 2 3 700

pcs. 30 10 30 10 50 10 50 10 100 10 50 10 80 10 50 10 60 5 30 5 30 3 20 2 5 2 5 2 10 2 5 2 5 2 5 2 10 2 3 2 3 2 2 2 3 2 2 2 3 760

pcs. 30 10 30 10 50 10 50 10 100 10 100 10 100 10 50 10 100 5 30 5 30 3 20 3 10 2 5 2 20 2 5 2 5 2 5 2 10 2 5 2 5 2 5 2 5 2 5 2 5 900

pcs. 50 10 50 10 50 10 100 20 100 20 100 20 100 10 50 10 50 10 30 10 30 10 30 10 30 5 30 3 30 3 20 3 20 2 20 2 10 2 5 2 5 2 5 2 5 2 5 2 5 1110

01135510 01155510 01229510 01402510 01170510 01205510 01068510 01075510 01016510 pcs. 10 10 10 10 10 10 10 10 10 3 3 3 3 3 3 2 2 2 2 2 2 2 2 2 2 128

pcs. 10 10 10 10 10 10 10 10 10 3 3 3 3 3 3 2 2 2 2 2 2 2 2 2 2 128

pcs. 10 10 10 10 20 10 10 10 10 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 168

pcs. 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 158

pcs. 10 10 10 10 20 10 10 10 10 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 168

pcs. 30 50 50 50 100 50 100 30 30 10 20 10 10 5 10 5 5 5 10 5 5 5 5 5 5 610

127

128

GAMBO RINFORZATO

140° 27° -

140° 27° SI YES

HM HSS 118° 27° -

HSS Co 130° 27° -

118° 27°

118°

118 OTTONE BRASS

ALLUMINIO E LEGHE

1200

800

27°

SI YES

800

27°

R≤N/mm²

ALUMINUM AND ALLOYS

<700 N/mm

ACCIAO

<900 N/mm

STEEL

ACCIAO

<1400 N/mm

STEEL

ACCIAO

STAINLESS STEEL

INOX

TITANIUM AND SUPERALLOY

TITANIO E SUPERLEGHE

IMMAGINE

OIL HOLES

STEEL

IMAGE

FORI DI LUBRIFICAZIONE

MATERIAL

MATERIALE

HELIX ANGLE

HSS-R ELICA

HSS-G SHARPENING

MD AFFILATURA

CODOLO CONICO

VISIONE D'INSIEME: PUNTE GAMBO RINFORZATO E ATTACCO CONICO MORSE

Overview: reinforced shank twist drills and Morse taper shank

1100

650

COD.

DIN 6537L

COD.

DIN 6537K

DIN 1870/1

DIN 341

DIN 345

COD.

01368

01369

p.130

p.131

01366

01367

p.132

p.133

01213 p.134

COD.

01150 p.136

COD.

01097

01028

01088

p.138

p.140

p.142

01069

COD.

p.141

COD.

01025 p.144

129

PUNTE IN METALLO DURO INTEGRALE RIVESTITE TiAlN CON GAMBO RINFORZATO, SERIE CORTA DIN 6537K TiAlN coated tungsten carbide drill bits with reinforced shank, short serie DIN 6537K

01368 140°

W 27°

VHM

Confezione Packaging

VHM+TiAlN Senza fori Without holes

<3 d

R ≤ 1200 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

super leghe

Titanio e superleghe titanium and nickel-based super alloys

Ø m7

d h6

L pcs.

3 3,1 3,2 3,3 3,4 3,5 3,6 3,7 3,8 3,9 4 4,1 4,2 4,3 4,4 4,5 4,6 4,7 4,8 4,9 5 5,1 5,2 5,3 5,4 5,5 5,6 5,7 5,8 5,9 6 6,1 6,2 6,3 6,4 6,5 6,6 6,7 6,8 6,9 7 7,1

6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8

20 20 20 20 20 20 20 20 24 24 24 24 24 24 24 24 24 28 28 28 28 28 28 28 28 28 28 28 28 28 28 34 34 34 34 34 34 34 34 34 34 41

62 62 62 62 62 62 62 62 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 79 79 79 79 79 79 79 79 79 79 79

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

€

cod.

cad/each

013680300 013680310 013680320 013680330 013680340 013680350 013680360 013680370 013680380 013680390 013680400 013680410 013680420 013680430 013680440 013680450 013680460 013680470 013680480 013680490 013680500 013680510 013680520 013680530 013680540 013680550 013680560 013680570 013680580 013680590 013680600 013680610 013680620 013680630 013680640 013680650 013680660 013680670 013680680 013680690 013680700 013680710

79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436

130

Ø m7

d h6

L pcs.

7,2 7,3 7,4 7,5 7,6 7,7 7,8 7,9 8 8,1 8,2 8,3 8,4 8,5 8,6 8,7 8,8 8,9 9 9,1 9,2 9,3 9,4 9,5 9,6 9,7 9,8 10 10,2 10,5 11 11,5 12 12,5 13 13,5 14 14,5 15 15,5 16

8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 12 12 12 12 12 14 14 14 14 16 16 16 16

41 41 41 41 41 41 41 41 41 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 55 55 55 55 55 60 60 60 60 65 65 65 65

79 79 79 79 79 79 79 79 79 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 102 102 102 102 102 107 107 107 107 115 115 115 115

Ø l

Structural and case hardened steels, cast steels, heat treatable steels, alloyed steels up to 1200 N/mm2, carbon steels, bronze, cast iron, high alloyed Al-Si alloys.

Short serie

Carbide

Acciai induriti, acciai per lavorazioni a caldo, acciai legati fino a 1200 N/mm2, acciai dolci, bronzo, ghisa, leghe Al-Si.

Serie corta

DIN 6537K METALLO DURO

TiAlN

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

€

cod.

cad/each

013680720 013680730 013680740 013680750 013680760 013680770 013680780 013680790 013680800 013680810 013680820 013680830 013680840 013680850 013680860 013680870 013680880 013680890 013680900 013680910 013680920 013680930 013680940 013680950 013680960 013680970 013680980 013681000 013681020 013681050 013681100 013681150 013681200 013681250 013681300 013681350 013681400 013681450 013681500 013681550 013681600

79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 79,436 89,092 89,092 89,092 89,092 89,092 89,092 89,092 89,092 89,092 89,092 89,092 89,092 89,092 89,092 89,092 89,092 89,092 89,092 89,092 132,871 132,871 132,871 132,871 132,871 178,322 178,322 178,322 178,322 230,024 230,024 230,024 230,024

Profondità di foratura 3 Ø Cutting depth 3 Ø

PUNTE IN METALLO DURO INTEGRALE RIVESTITE TiAlN CON GAMBO RINFORZATO, SERIE LUNGA DIN 6537L TiAlN coated tungsten carbide drill bits with reinforced shank, long serie DIN 6537L

01369 140°

W 27°

VHM

Confezione Packaging

VHM+TiAlN Senza fori Without holes

<5 d

R ≤ 1200 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

super leghe

Titanio e superleghe titanium and nickel-based super alloys

Serie lunga

DIN 6537L METALLO DURO

TiAlN

Long serie

Carbide Ø m7

d h6

L pcs.

3 3,1 3,2 3,3 3,4 3,5 3,6 3,7 3,8 3,9 4 4,1 4,2 4,3 4,4 4,5 4,6 4,7 4,8 4,9 5 5,1 5,2 5,3 5,4 5,5 5,6 5,7 5,8 5,9 6 6,1 6,2 6,3 6,4 6,5 6,6 6,7 6,8 6,9 7 7,1

6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8

28 28 28 28 28 28 28 28 36 36 36 36 36 36 36 36 36 44 44 44 44 44 44 44 44 44 44 44 44 44 44 53 53 53 53 53 53 53 53 53 53 53

66 66 66 66 66 66 66 66 74 74 74 74 74 74 74 74 74 82 82 82 82 82 82 82 82 82 82 82 82 82 82 91 91 91 91 91 91 91 91 91 91 91

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

€

cod.

cad/each

013690300 013690310 013690320 013690330 013690340 013690350 013690360 013690370 013690380 013690390 013690400 013690410 013690420 013690430 013690440 013690450 013690460 013690470 013690480 013690490 013690500 013690510 013690520 013690530 013690540 013690550 013690560 013690570 013690580 013690590 013690600 013690610 013690620 013690630 013690640 013690650 013690660 013690670 013690680 013690690 013690700 013690710

90,834 90,834 90,834 90,834 90,834 90,834 90,834 90,834 90,834 90,834 90,834 90,834 90,834 90,834 90,834 90,834 90,834 90,834 90,834 90,834 90,834 90,834 90,834 90,834 90,834 90,834 90,834 90,834 90,834 90,834 90,834 92,428 92,428 92,428 92,428 92,428 92,428 92,428 92,428 92,428 92,428 92,428

Ø m7

d h6

L pcs.

7,2 7,3 7,4 7,5 7,6 7,7 7,8 7,9 8 8,1 8,2 8,3 8,4 8,5 8,6 8,7 8,8 8,9 9 9,1 9,2 9,3 9,4 9,5 9,6 9,7 9,8 10 10,2 10,5 11 11,5 12 12,5 13 13,5 14 14,5 15 15,5 16

8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 12 12 12 12 12 14 14 14 14 16 16 16 16

53 53 53 53 53 53 53 53 53 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 71 71 71 71 71 77 77 77 77 83 83 83 83

91 91 91 91 91 91 91 91 91 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 118 118 118 118 118 124 124 124 124 133 133 133 133

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

€

cod.

cad/each

013690720 013690730 013690740 013690750 013690760 013690770 013690780 013690790 013690800 013690810 013690820 013690830 013690840 013690850 013690860 013690870 013690880 013690890 013690900 013690910 013690920 013690930 013690940 013690950 013690960 013690970 013690980 013691000 013691020 013691050 013691100 013691150 013691200 013691250 013691300 013691350 013691400 013691450 013691500 013691550 013691600

92,428 92,428 92,428 92,428 92,428 92,428 92,428 92,428 92,428 102,092 102,092 102,092 102,092 102,092 102,092 102,092 102,092 102,092 102,092 102,092 102,092 102,092 102,092 102,092 102,092 102,092 102,092 102,092 152,405 152,405 152,405 152,405 152,405 200,911 200,911 200,911 200,911 260,879 260,879 260,879 260,879

Profondità di foratura 5 Ø Cutting depth 5 Ø

l L Acciai induriti, acciai per lavorazioni a caldo, acciai legati fino a 1200 N/mm2, acciai dolci, bronzo, ghisa, leghe Al-Si. Structural and case hardened steels, cast steels, heat treatable steels, alloyed steels up to 1200 N/mm2, carbon steels, bronze, cast iron, high alloyed Al-Si alloys.

131

PUNTE IN METALLO DURO INTEGRALE RIVESTITE TiAlN CON GAMBO RINFORZATO, SERIE CORTA DIN 6537K - CON FORI TiAlN coated tungsten carbide drill bits with reinforced shank, short serie DIN 6537K

01366 140°

W 27°

VHM

R ≤ 1200 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

super leghe

Ø m7

D h6

L pcs.

3 3,1 3,2 3,3 3,4 3,5 3,6 3,7 3,8 3,9 4 4,1 4,2 4,3 4,4 4,5 4,6 4,7 4,8 4,9 5 5,1 5,2 5,3 5,4 5,5 5,6 5,7 5,8 5,9 6 6,1 6,2 6,3 6,4 6,5 6,6 6,7 6,8 6,9 7 7,1

6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8

20 20 20 20 20 20 20 20 24 24 24 24 24 24 24 24 24 28 28 28 28 28 28 28 28 28 28 28 28 28 28 34 34 34 34 34 34 34 34 34 34 41

62 62 62 62 62 62 62 62 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 79 79 79 79 79 79 79 79 79 79 79

Packaging

<3 d

Titanio e superleghe titanium and nickel-based super alloys

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

€

cod.

cad/each

013660300 013660310 013660320 013660330 013660340 013660350 013660360 013660370 013660380 013660390 013660400 013660410 013660420 013660430 013660440 013660450 013660460 013660470 013660480 013660490 013660500 013660510 013660520 013660530 013660540 013660550 013660560 013660570 013660580 013660590 013660600 013660610 013660620 013660630 013660640 013660650 013660660 013660670 013660680 013660690 013660700 013660710

94,170 94,170 94,170 94,170 94,170 94,170 94,170 94,170 94,170 94,170 102,061 102,061 102,061 102,061 102,061 102,061 102,061 102,061 102,061 102,061 102,061 102,061 102,061 102,061 102,061 102,061 102,061 102,061 102,061 102,061 102,061 138,475 138,475 138,475 138,475 138,475 138,475 138,475 138,475 138,475 138,475 138,475

d l L Acciai induriti, acciai per lavorazioni a caldo, acciai legati fino a 1200 N/mm2, acciai dolci, bronzo, ghisa, leghe Al-Si. Structural and case hardened steels, cast steels, heat treatable steels, alloyed steels up to 1200 N/mm2, carbon steels, bronze, cast iron, high alloyed Al-Si alloys.

132

Short serie - with holes

Carbide

Confezione

VHM+TiAlN Con fori With holes

Serie corta - con fori

DIN 6537K METALLO DURO

TiAlN

Ø m7

D h6

L pcs.

7,2 7,3 7,4 7,5 7,6 7,7 7,8 7,9 8 8,1 8,2 8,3 8,4 8,5 8,6 8,7 8,8 8,9 9 9,1 9,2 9,3 9,4 9,5 9,6 9,7 9,8 10 10,2 10,5 11 11,5 12 12,5 13 13,5 14 14,5 15 15,5 16

8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 12 12 12 12 12 14 14 14 14 16 16 16 16

41 41 41 41 41 41 41 41 41 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 55 55 55 55 55 60 60 60 60 65 65 65 65

79 79 79 79 79 79 79 79 79 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 102 102 102 102 102 107 107 107 107 115 115 115 115

Profondità di foratura 3 Ø Cutting depth 3 Ø

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

€

cod.

cad/each

013660720 013660730 013660740 013660750 013660760 013660770 013660780 013660790 013660800 013660810 013660820 013660830 013660840 013660850 013660860 013660870 013660880 013660890 013660900 013660910 013660920 013660930 013660940 013660950 013660960 013660970 013660980 013661000 013661020 013661050 013661100 013661150 013661200 013661250 013661300 013661350 013661400 013661450 013661500 013661550 013661600

138,475 138,475 138,475 138,475 138,475 138,475 138,475 138,475 138,475 155,250 155,250 155,250 155,250 155,250 155,250 155,250 155,250 155,250 155,250 155,250 155,250 155,250 155,250 155,250 155,250 155,250 155,250 155,250 222,202 222,202 222,202 222,202 222,202 310,489 310,489 310,489 310,489 379,008 379,008 379,008 379,008

PUNTE IN METALLO DURO INTEGRALE RIVESTITE TiAlN CON GAMBO RINFORZATO, SERIE LUNGA DIN 6537L - CON FORI TiAlN coated tungsten carbide drill bits with reinforced shank, long serie DIN 6537L

01367 140°

W 27°

VHM

Confezione Packaging

VHM+TiAlN Con fori With holes

<5 d

R ≤ 1200 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

super leghe

Titanio e superleghe titanium and nickel-based super alloys

Serie lunga - con fori

DIN 6537L METALLO DURO

TiAlN

Long serie - with holes

Carbide Ø m7

D h6

L pcs.

3 3,1 3,2 3,3 3,4 3,5 3,6 3,7 3,8 3,9 4 4,1 4,2 4,3 4,4 4,5 4,6 4,7 4,8 4,9 5 5,1 5,2 5,3 5,4 5,5 5,6 5,7 5,8 5,9 6 6,1 6,2 6,3 6,4 6,5 6,6 6,7 6,8 6,9 7 7,1

6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8

28 28 28 28 28 28 28 28 36 36 36 36 36 36 36 36 36 44 44 44 44 44 44 44 44 44 44 44 44 44 44 53 53 53 53 53 53 53 53 53 53 53

66 66 66 66 66 66 66 66 74 74 74 74 74 74 74 74 74 82 82 82 82 82 82 82 82 82 82 82 82 82 82 91 91 91 91 91 91 91 91 91 91 91

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

€

cod.

cad/each

013670300 013670310 013670320 013670330 013670340 013670350 013670360 013670370 013670380 013670390 013670400 013670410 013670420 013670430 013670440 013670450 013670460 013670470 013670480 013670490 013670500 013670510 013670520 013670530 013670540 013670550 013670560 013670570 013670580 013670590 013670600 013670610 013670620 013670630 013670640 013670650 013670660 013670670 013670680 013670690 013670700 013670710

121,708 121,708 121,708 121,708 121,708 121,708 121,708 121,708 121,708 121,708 130,975 130,975 130,975 130,975 130,975 130,975 130,975 130,975 130,975 130,975 130,975 130,975 130,975 130,975 130,975 130,975 130,975 130,975 130,975 130,975 130,975 144,678 144,678 144,678 144,678 144,678 144,678 144,678 144,678 144,678 144,678 144,678

Ø m7

D h6

L pcs.

7,2 7,3 7,4 7,5 7,6 7,7 7,8 7,9 8 8,1 8,2 8,3 8,4 8,5 8,6 8,7 8,8 8,9 9 9,1 9,2 9,3 9,4 9,5 9,6 9,7 9,8 10 10,2 10,5 11 11,5 12 12,5 13 13,5 14 14,5 15 15,5 16

8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 12 12 12 12 12 14 14 14 14 16 16 16 16

53 53 53 53 53 53 53 53 53 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 71 71 71 71 71 77 77 77 77 83 83 83 83

91 91 91 91 91 91 91 91 91 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 118 118 118 118 118 124 124 124 124 133 133 133 133

Profondità di foratura 5 Ø Cutting depth 5 Ø

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

€

cod.

cad/each

013670720 013670730 013670740 013670750 013670760 013670770 013670780 013670790 013670800 013670810 013670820 013670830 013670840 013670850 013670860 013670870 013670880 013670890 013670900 013670910 013670920 013670930 013670940 013670950 013670960 013670970 013670980 013671000 013671020 013671050 013671100 013671150 013671200 013671250 013671300 013671350 013671400 013671450 013671500 013671550 013671600

144,678 144,678 144,678 144,678 144,678 144,678 144,678 144,678 144,678 165,822 165,822 165,822 165,822 165,822 165,822 165,822 165,822 165,822 165,822 165,822 165,822 165,822 165,822 165,822 165,822 165,822 165,822 165,822 242,040 242,040 242,040 242,040 242,040 325,568 325,568 325,568 325,568 401,718 401,718 401,718 401,718

133

PUNTE ELICOIDALI CODOLO CONICO MORSE CON TAGLIENTI IN METALLO DURO Morse taper shank twist drills with carbide tips

01213 118°

W 27°

Carbide tip HM/K20

<5 d

R ≤ 1100 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

HM HSS

Serie corta

DIN 345 FRESATA

Short serie

Milled

Confezione Packaging

Ø h8

M.K.

pcs.

cod.

10 10,5 11 11,5 12 12,5 13 13,5 14 14,5 15,5 16 16,5 17 17,5 18 18,5 20 21 21,5 22 22,5 23,5 24 24,5 25 26,5 27 27,5 28 28,5 29,5 30,5 31 31,5 32 32,5 33 33,5 34,5 35

1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4

87 87 94 94 101 101 101 108 108 114 120 120 125 125 130 130 135 140 145 150 150 155 155 160 160 160 165 170 170 170 175 175 180 180 180 185 185 185 185 190 190

168 168 175 175 182 182 182 189 189 212 218 218 223 223 228 228 233 238 243 248 248 253 276 281 281 281 286 291 291 291 296 296 301 301 301 334 334 334 334 339 339

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

012131000 012131050 012131100 012131150 012131200 012131250 012131300 012131350 012131400 012131450 012131550 012131600 012131650 012131700 012131750 012131800 012131850 012132000 012132100 012132150 012132200 012132250 012132350 012132400 012132450 012132500 012132650 012132700 012132750 012132800 012132850 012132950 012133050 012133100 012133150 012133200 012133250 012133300 012133350 012133450 012133500

€ cad/each

93,222 93,222 93,222 97,335 97,335 104,031 104,031 120,515 120,515 123,601 128,752 128,752 141,113 141,113 141,113 141,113 149,351 191,587 206,005 211,157 211,157 216,309 224,547 224,547 236,906 236,906 306,949 306,949 323,424 323,424 360,507 388,314 407,590 407,590 453,300 453,300 459,965 459,965 470,443 479,965 479,965

Taglio di acciai duri con R ≤ 1100 N/mm2, acciai per molle, ghisa temperata, molibdeno puro, bronzo duro, materie plastiche termoindurenti con azione abrasiva, materie sintetiche con fibre vetrose,… Cut of hard steels R ≤ 1100 N/mm2, spring steel, hard cast iron, Mo, hard bronze, abrasive thermosetting plastics, glass fiber reinforced plastics,…

134

HM/K20

118°

HSS

W 27°

135

PUNTE ELICOIDALI AL COBALTO 5% CODOLO CONICO MORSE Cobalt Morse taper shank twist drills

01150 130°

W 27°

HSS-CO 5%

Confezione Packaging

HV 800÷860 AISI M35 DIN 1412 C

<5 d

R ≤ 1200 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Emulsione Lubrificant

Punte con ottima resistenza alle sollecitazioni termiche, adatte per forare acciai legati e non, con R sino a 1200 N/mm2, in modo particolare acciai da bonifica, acciai per lavorazioni a caldo e a freddo, acciai inossidabili, ghisa etc. High performance in cutting alloy steel, cast iron, stainless steel and metals up to R ≤ 1200 N/mm2.

136

Serie corta

DIN 345 FRESATA

Short serie

Ø h8

M.K.

pcs.

cod.

7 7,5 8 8,5 9 9,25 9,5 10 10,25 10,5 10,75 11 11,25 11,5 11,75 12 12,25 12,5 12,75 13 13,25 13,5 13,75 14 14,25 14,5 14,75 15 15,25 15,5 15,75 16 16,25 16,5 16,75 17 17,25 17,5 17,75 18 18,25 18,5 18,75 19 19,25 19,5 19,75 20 20,25 20,5 20,75 21 21,25 21,5 21,75 22 22,25 22,5 22,75 23 23,25 23,5

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3

69 69 75 75 81 81 81 87 87 87 94 94 94 94 94 101 101 101 101 101 108 108 108 108 114 114 114 114 120 120 120 120 125 125 125 125 130 130 130 130 135 135 135 135 140 140 140 140 145 145 145 145 150 150 150 150 155 155 155 155 155 155

150 150 156 156 162 162 162 168 168 168 175 175 175 175 175 182 182 182 182 182 189 189 189 189 212 212 212 212 218 218 218 218 223 223 223 223 228 228 228 228 233 233 233 233 238 238 238 238 243 243 243 243 248 248 248 248 248 253 253 253 276 276

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

011500700 011500750 011500800 011500850 011500900 011500925 011500950 011501000 011501025 011501050 011501075 011501100 011501125 011501150 011501175 011501200 011501225 011501250 011501275 011501300 011501325 011501350 011501375 011501400 011501425 011501450 011501475 011501500 011501525 011501550 011501575 011501600 011501625 011501650 011501675 011501700 011501725 011501750 011501775 011501800 011501825 011501850 011501875 011501900 011501925 011501950 011501975 011502000 011502025 011502050 011502075 011502100 011502125 011502150 011502175 011502200 011502225 011502250 011502275 011502300 011502325 011502350

€ cad/each

48,431 48,431 48,431 48,431 48,431 48,431 48,431 48,431 48,431 48,431 48,431 48,431 48,431 48,431 48,431 48,431 51,202 51,202 51,202 51,202 55,969 55,969 59,847 59,847 70,352 70,352 71,127 71,127 77,380 77,380 77,380 77,380 82,898 82,898 82,898 82,898 85,944 85,944 85,944 85,944 91,388 91,388 91,388 91,388 106,269 106,269 106,269 106,269 127,449 127,449 130,884 130,884 143,098 143,098 143,098 143,098 151,021 151,021 164,319 164,319 166,979 166,979

Serie corta Short serie

Ø h8

M.K.

pcs.

cod.

23,75 24 24,25 24,5 24,75 25 25,25 25,5 25,75 26 26,25 26,5 26,75 27 27,25 27,5 27,75 28 28,25 28,5 28,75 29 29,25 29,5 29,75 30 30,25 30,5 30,75 31 31,25 31,5 31,75 32 32,25 32,5 32,75 33 33,25 33,5 33,75 34 34,25 34,5 34,75 35 35,25 35,5 35,75 36 36,25 36,5 36,75 37 37,25 37,5 37,75 38 38,25 38,5 38,75 39

3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

160 160 160 160 160 160 165 165 165 165 165 165 170 170 170 170 170 170 175 175 175 175 175 175 175 175 180 180 180 180 180 180 185 185 185 185 185 185 185 185 185 190 190 190 190 190 190 190 190 195 195 195 195 195 195 195 195 200 200 200 200 200

281 281 281 281 281 281 286 286 286 286 286 286 291 291 291 291 291 291 296 296 296 296 296 296 296 296 301 301 301 301 301 301 306 334 334 334 334 334 334 334 334 339 339 339 339 339 339 339 339 344 344 344 344 344 344 344 344 349 349 349 349 349

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

011502375 011502400 011502425 011502450 011502475 011502500 011502525 011502550 011502575 011502600 011502625 011502650 011502675 011502700 011502725 011502750 011502775 011502800 011502825 011502850 011502875 011502900 011502925 011502950 011502975 011503000 011503025 011503050 011503075 011503100 011503125 011503150 011503175 011503200 011503225 011503250 011503275 011503300 011503325 011503350 011503375 011503400 011503425 011503450 011503475 011503500 011503525 011503550 011503575 011503600 011503625 011503650 011503675 011503700 011503725 011503750 011503775 011503800 011503825 011503850 011503875 011503900

€ cad/each

182,861 182,861 188,147 188,147 188,147 188,147 212,018 212,018 214,679 214,679 217,283 217,283 230,549 230,549 238,485 238,485 238,485 238,485 255,142 255,142 259,685 259,685 259,685 259,685 272,917 272,917 330,919 330,919 330,919 330,919 355,793 355,793 355,793 355,793 372,978 372,978 372,978 372,978 404,876 404,876 404,876 404,876 419,598 419,598 419,598 419,598 471,120 471,120 471,120 471,120 501,791 501,791 501,791 501,791 539,825 539,825 539,825 539,825 634,303 634,303 634,303 634,303

Ø h8

M.K.

pcs.

cod.

39,25 39,5 39,75 40 40,5 41 41,5 42 42,5 43 43,5 44 44,5 45 45,5 46 46,5 47 47,5 48 48,5 49 49,5 50 50,5 51 51,5 52 52,5 53 53,5 54 54,5 55 55,5 56 56,5 57 57,5 58 58,5 59 59,5 60

4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

200 200 200 200 205 205 205 205 205 210 210 210 210 210 215 215 215 215 215 220 220 220 220 220 225 225 225 225 225 225 230 230 230 230 230 230 235 235 235 235 235 235 235 235

349 349 349 349 354 354 354 354 354 359 359 359 359 359 364 364 364 364 364 369 369 369 369 369 374 412 412 412 412 412 417 417 417 417 417 417 422 422 422 422 422 422 422 422

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

011503925 011503950 011503975 011504000 011504050 011504100 011504150 011504200 011504250 011504300 011504350 011504400 011504450 011504500 011504550 011504600 011504650 011504700 011504750 011504800 011504850 011504900 011504950 011505000 011505050 011505100 011505150 011505200 011505250 011505300 011505350 011505400 011505450 011505500 011505550 011505600 011505650 011505700 011505750 011505800 011505850 011505900 011505950 011506000

€ cad/each

634,303 634,303 634,303 634,303 660,892 729,485 729,485 760,667 760,667 835,430 835,430 854,180 854,180 910,284 910,284 916,534 916,534 972,627 972,627 1.059,890 1.059,890 1.084,823 1.084,823 1.109,744 1.109,744 1.353,442 1.353,442 1.407,992 1.407,992 1.428,785 1.428,785 1.532,689 1.532,689 1.558,665 1.558,665 1.558,665 1.558,665 1.652,190 1.652,190 1.745,715 1.745,715 1.745,715 1.808,057 1.808,057

137

PUNTE ELICOIDALI CODOLO CONICO MORSE, ESECUZIONE FRESATA Morse taper shank twist drills

01097 118°

W 27°

DIN 345

HSS

Milled Confezione Packaging

HV 820

<5 d

R ≤ 800 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

138

Serie corta

FRESATA Ø h8

M.K. L

5 5,5 6 6,25 6,5 6,75 7 7,25 7,5 7,75 8 8,25 8,5 8,75 9 9,25 9,5 9,75 10 10,25 10,5 10,75 11 11,25 11,5 11,75 12 12,25 12,5 12,75 13 13,25 13,5 13,75 14 14,25 14,5 14,5 14,75 15 15,25 15,5 15,75 16 16,25 16,5 16,75 17 17,25 17,5 17,75 18 18,25 18,5 18,75 19 19,25 19,5 19,75 20 20,25 20,5 20,75

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Short serie

cod.

cad/each

Ø h8

M.K. L

d pcs.

1 010970500 1 010970550 1 010970600 1 010970625 1 010970650 1 010970675 1 010970700 1 010970725 1 010970750 1 010970775 1 010970800 1 010970825 1 010970850 1 010970875 1 010970900 1 010970925 1 010970950 1 010970975 1 010971000 1 010971025 1 010971050 1 010971075 1 010971100 1 010971125 1 010971150 1 010971175 1 010971200 1 010971225 1 010971250 1 010971275 1 010971300 1 010971325 1 010971350 1 010971375 1 010971400 1 010971425 1 010971450 1 010971450C192 1 010971475 1 010971500 1 010971525 1 010971550 1 010971575 1 010971600 1 010971625 1 010971650 1 010971675 1 010971700 1 010971725 1 010971750 1 010971775 1 010971800 1 010971825 1 010971850 1 010971875 1 010971900 1 010971925 1 010971950 1 010971975 1 010972000 1 010972025 1 010972050 1 010972075

16,625 22,222 16,625 18,299 16,625 18,299 16,625 18,299 16,625 18,299 16,625 18,299 16,625 18,299 16,625 18,299 16,625 18,299 16,625 20,052 18,220 20,052 18,220 20,052 18,220 21,688 19,719 21,688 19,719 23,906 21,727 23,906 21,727 27,018 24,571 27,018 24,571 39,000 27,018 24,571 27,018 24,571 30,671 27,878 33,061 30,045 35,375 32,157 37,156 33,779 39,016 35,455 39,016 35,455 43,016 39,107 44,265 40,251 45,606 41,461 45,606 41,461 48,835

21 21,25 21,5 21,75 22 22,25 22,5 22,75 23 23,25 23,5 23,75 24 24,25 24,5 24,75 25 25,25 25,5 25,75 26 26,25 26,5 26,75 27 27,25 27,5 27,75 28 28,25 28,5 28,75 29 29,25 29,5 29,75 30 30,25 30,5 30,75 31 31,25 31,5 31,75 32 32,25 32,5 32,75 33 33,25 33,5 33,75 34 34,25 34,5 34,75 35 35,25 35,5 35,75 36 36,25 36,5

2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

d pcs.

52 133 57 138 57 138 63 144 63 144 69 150 69 150 69 150 69 150 75 156 75 156 75 156 75 156 81 162 81 162 81 162 81 162 87 168 87 168 87 168 87 168 94 175 94 175 94 175 94 175 94 175 101 182 101 182 101 182 101 182 101 182 108 189 108 189 108 189 108 189 114 212 114 212 192 212 114 212 114 212 120 218 120 218 120 218 120 218 125 223 125 223 125 223 125 223 130 228 130 228 130 228 130 228 135 233 135 233 135 233 135 233 140 238 140 238 140 238 140 238 145 243 145 243 145 243

€

145 243 150 248 150 248 150 248 150 248 155 248 155 253 155 253 155 253 155 276 155 276 160 281 160 281 160 281 160 281 160 281 160 281 165 286 165 286 165 286 165 286 165 286 165 286 170 291 170 291 170 291 170 291 170 291 170 291 175 296 175 296 175 296 175 296 175 296 175 296 175 296 175 296 180 301 180 301 180 301 180 301 180 301 180 301 185 306 185 334 185 334 185 334 185 334 185 334 185 334 185 334 185 334 190 339 190 339 190 339 190 339 190 339 190 339 190 339 190 339 195 344 195 344 195 344

€

cod.

cad/each

010972100 010972125 010972150 010972175 010972200 010972225 010972250 010972275 010972300 010972325 010972350 010972375 010972400 010972425 010972450 010972475 010972500 010972525 010972550 010972575 010972600 010972625 010972650 010972675 010972700 010972725 010972750 010972775 010972800 010972825 010972850 010972875 010972900 010972925 010972950 010972975 010973000 010973025 010973050 010973075 010973100 010973125 010973150 010973175 010973200 010973225 010973250 010973275 010973300 010973325 010973350 010973375 010973400 010973425 010973450 010973475 010973500 010973525 010973550 010973575 010973600 010973625 010973650

44,410 48,835 44,410 50,124 45,566 50,124 45,566 55,268 50,231 67,985 61,806 67,985 61,806 67,985 61,806 69,406 63,095 69,406 63,095 86,162 78,337 86,162 78,337 89,618 81,472 89,618 81,472 93,193 84,729 93,193 84,729 107,185 97,446 107,185 97,446 110,415 100,381 110,415 100,381 123,664 112,421 130,082 118,241 132,673 120,620 132,673 120,620 132,673 120,620 153,788 139,663 158,106 142,454 168,167 153,788 176,791 160,976 176,791 160,976 204,100 185,416 204,100 185,416

Serie corta Short serie

Ø h8

M.K.

pcs.

cod.

36,75 37 37,25 37,5 37,75 38 38,25 38,5 38,75 39 39,25 39,5 39,75 40 40,5 41 41,5 42 42,5 43 43,5 44 44,5 45 45,5 46 46,5 47 47,5 48 48,5 49 49,5 50 50,5 51 52 52,5 53 53,5 54 54,5 55 55,5 56 56,5 57 57,5 58 58,5 59 59,5 60 61 62 63 64 65 66 67 68 69 70

4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

195 195 195 195 195 200 200 200 200 200 200 200 200 200 205 205 205 205 205 210 210 210 210 210 215 215 215 215 215 220 220 220 220 220 225 225 225 225 225 230 230 230 230 230 230 235 235 235 235 235 235 235 235 240 240 240 245 245 245 245 250 250 250

344 344 344 344 344 349 349 349 349 349 349 349 349 349 354 354 354 354 354 359 359 359 359 359 364 364 364 364 364 369 369 369 369 369 374 412 412 412 412 417 417 417 417 417 417 422 422 422 422 422 422 422 422 427 427 427 432 432 432 432 437 437 437

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

010973675 010973700 010973725 010973750 010973775 010973800 010973825 010973850 010973875 010973900 010973925 010973950 010973975 010974000 010974050 010974100 010974150 010974200 010974250 010974300 010974350 010974400 010974450 010974500 010974550 010974600 010974650 010974700 010974750 010974800 010974850 010974900 010974950 010975000 010975050 010975100 010975200 010975250 010975300 010975350 010975400 010975450 010975500 010975550 010975600 010975650 010975700 010975750 010975800 010975850 010975900 010975950 010976000 010976100 010976200 010976300 010976400 010976500 010976600 010976700 010976800 010976900 010977000

€ cad/each

204,100 185,416 204,100 185,416 226,647 205,921 226,647 205,921 226,647 205,921 226,647 205,921 226,647 205,921 247,383 247,383 254,283 254,283 254,283 254,283 254,283 265,349 265,349 277,780 277,780 277,780 277,780 306,813 306,813 306,813 337,210 337,210 348,263 348,263 415,983 415,983 415,983 415,983 415,983 507,201 507,201 507,201 507,201 507,201 583,214 583,214 583,214 583,214 583,214 583,214 583,214 583,214 583,214 769,777 769,777 769,777 769,777 769,777 978,459 978,459 978,459 978,459 1.121,848

Ø h8

M.K.

pcs.

cod.

71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100

5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

250 255 255 255 255 260 260 260 260 260 265 265 265 265 265 270 270 270 270 270 275 275 275 275 275 280 280 280 280 280

437 442 442 442 442 447 514 514 514 514 519 519 519 519 519 524 524 524 524 524 529 529 529 529 529 534 534 534 534 534

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

010977100 010977200 010977300 010977400 010977500 010977600 010977700 010977800 010977900 010978000 010978100 010978200 010978300 010978400 010978500 010978600 010978700 010978800 010978900 010979000 010979100 010979200 010979300 010979400 010979500 010979600 010979700 010979800 010979900 0109710000

€ cad/each

1.162,957 1.222,874 1.268,688 1.342,693 1.367,358 1.487,185 1.534,169 1.582,337 1.653,986 1.702,153 1.798,479 1.821,971 1.893,630 1.893,630 1.918,295 1.966,464 1.989,954 2.038,123 2.086,279 2.086,279 2.253,092 2.349,416 2.372,909 2.372,909 2.421,076 2.490,380 2.540,892 2.589,060 2.777,008 4.647,696

139

PUNTE ELICOIDALI CODOLO CONICO MORSE, SERIE LUNGA, ESECUZIONE FRESATA Morse taper shank twist drills, long serie

01028 118°

W 27°

HV 820

<8 d

R ≤ 800 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

HSS

Serie lunga

DIN 341 FRESATA

Long serie

Milled Confezione Packaging

Ø h8

M.K. l

d pcs.

8 8,5 9 9,5 10 10,25 10,5 11 11,5 12 12,25 12,5 13 13,25 13,5 14 14,5 15 15,5 16 16,5 17 17,5 18 18,5 19 19,5 20 20,5 21 21,5 22 22,5 23 23,5 24

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

100 181 100 181 107 188 107 188 116 197 116 197 116 197 125 206 125 206 134 215 134 215 134 215 134 215 142 223 142 223 142 223 147 245 147 245 153 251 153 251 159 257 159 257 165 263 165 263 171 269 171 269 177 275 177 275 184 282 184 282 191 289 191 289 198 296 198 296 198 319 206 327

cod.

€ cad/each

010280800 30,589 010280850 31,541 010280900 35,029 010280950 35,029 010281000 35,523 010281025 37,335 010281050 37,335 010281100 38,883 010281150 41,832 010281200 43,771 010281225 45,689 010281250 45,689 010281300 45,689 010281325 49,542 010281350 49,542 010281400 52,594 010281450 55,487 010281500 61,143 010281550 63,575 010281600 63,575 010281650 67,328 010281700 67,328 010281750 71,067 010281800 76,070 010281850 79,168 010281900 79,168 010281950 82,645 010282000 82,645 010282050 96,034 010282100 96,034 010282150 104,788 010282200 104,788 010282250 110,962 010282300 119,716 010282350 123,582 010282400 134,516

Ø h8

M.K. l

d pcs.

24,5 25 25,5 26 26,5 27 27,5 28 28,5 29 29,5 30 31 32 33 34 35 35,5 36 36,5 37 37,5 38 39 40 41 42 43 44 45 46 47 48 49 50

3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

206 327 206 327 214 335 214 335 214 335 222 343 222 343 222 343 230 351 230 351 230 351 230 351 239 360 248 397 248 397 257 406 257 406 267 416 267 416 267 416 267 416 267 416 277 426 277 426 277 426 287 436 287 436 298 447 298 447 298 447 310 459 310 459 321 470 321 470 321 470

cod.

010282450 139,680 010282500 148,033 010282550 154,458 010282600 154,458 010282650 171,015 010282700 171,015 010282750 186,395 010282800 186,395 010282850 201,793 010282900 201,793 010282950 212,045 010283000 212,045 010283100 239,411 010283200 262,561 010283300 294,750 010283400 315,073 010283500 321,856 010283550 347,810 010283600 348,958 010283650 350,187 010283700 350,084 010283750 368,948 010283800 367,833 010283900 400,098 010284000 413,006 010284100 450,110 010284200 474,308 010284300 524,322 010284400 535,613 010284500 574,336 010284600 587,231 010284700 611,429 010284800 663,061 010284900 679,194 010285000 687,259

Emulsione Lubrificant

140

€ cad/each

PUNTE ELICOIDALI CODOLO CONICO MORSE CON FORI DI LUBROREFRIGERAZIONE Morse taper shank twist drills with internal coolant

01069 118°

W 27°

AISI M2 HV 820

<10 d

HSS

Serie lunga - con fori

DIN 341 FRESATA

Long serie - with holes

Milled Confezione Packaging

Ø h8

M.K.

pcs.

cod.

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32

2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 4

116 125 134 134 142 147 153 159 165 171 177 184 191 198 206 206 214 222 222 230 230 248

233 242 251 251 259 264 270 276 282 307 313 320 327 334 342 342 335 343 343 351 351 397

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

010691000 010691100 010691200 010691300 010691400 010691500 010691600 010691700 010691800 010691900 010692000 010692100 010692200 010692300 010692400 010692500 010692600 010692700 010692800 010692900 010693000 010693200

€ cad/each

278,704 307,136 298,429 295,216 309,846 359,271 367,328 377,000 386,203 536,191 544,697 558,753 551,180 650,087 646,200 695,783 695,783 842,046 837,221 915,021 886,858 986,024

R ≤ 800 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

141

PUNTE ELICOIDALI CODOLO CONICO MORSE, SERIE EXTRA LUNGA, ESECUZIONE FRESATA Morse taper shank twist drills, extra long serie

01088 118°

W 27°

HV 820

<10 d

R ≤ 800 N/mm2

Applicazioni Applications

Metalli Metals

HSS

Serie extra lunga

DIN 1870/1 FRESATA

Extra long serie

Milled Confezione Packaging

Ø h8

M.K. l

d pcs.

8 8,5 9 9,5 10 10,5 11 11,5 12 12,5 13 13,5 14 14,5 15 15,5 16 16,5 17 17,5 18 18,5 19 19,5 20 20,5 21 21,5 22 22,5 23 23,5 24

1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

165 265 165 265 175 275 175 275 185 285 185 285 195 300 195 300 205 310 205 310 205 310 220 325 220 325 220 340 220 340 230 355 230 355 230 355 230 355 245 370 245 370 245 370 245 370 260 385 260 385 260 385 260 385 270 405 270 405 270 405 270 405 270 425 290 440

€

cod.

cad/each

010880800 010880850 010880900 010880950 010881000 010881050 010881100 010881150 010881200 010881250 010881300 010881350 010881400 010881450 010881500 010881550 010881600 010881650 010881700 010881750 010881800 010881850 010881900 010881950 010882000 010882050 010882100 010882150 010882200 010882250 010882300 010882350 010882400

87,136 97,668 97,668 105,327 105,327 120,650 120,650 132,139 126,393 128,308 126,393 141,715 141,715 158,950 168,524 173,663 168,119 169,966 188,441 206,916 203,221 205,069 205,069 229,086 223,542 272,050 251,774 295,707 266,981 322,743 305,845 381,884 348,090

Ø h8

M.K. l

d pcs.

24,5 25 25,5 26 26,5 27 27,5 28 28,5 29 29,5 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

290 440 290 440 290 440 290 440 290 440 305 460 305 460 305 460 305 460 305 460 305 460 305 460 320 480 320 505 320 505 340 530 340 530 340 530 340 530 360 555 360 555 360 555 360 555 360 555 385 585 385 585 385 585 385 585 385 585 405 605 405 605 405 605

€

cod. 010882450 010882500 010882550 010882600 010882650 010882700 010882750 010882800 010882850 010882900 010882950 010883000 010883100 010883200 010883300 010883400 010883500 010883600 010883700 010883800 010883900 010884000 010884100 010884200 010884300 010884400 010884500 010884600 010884700 010884800 010884900 010885000

cad/each

405,541 368,367 439,336 395,403 466,372 408,920 483,270 439,336 517,065 466,372 540,721 479,891 581,276 594,794 621,830 672,523 682,661 726,594 733,352 777,286 817,841 821,220 878,672 895,570 980,056 980,056 1.030,749 1.081,442 1.132,134 1.233,520 1.284,212 1.267,314

Acciaio Steel

Emulsione Lubrificant

142

118°

HSS

W 27°

143

PUNTE ELICOIDALI CODOLO CONICO MORSE, ESECUZIONE RULLATA Morse taper shank twist drills

01025 118°

W 27°

HSS-R

DIN 345 Rolled

Confezione Packaging

HV 750÷820

<5 d

R ≤ 650 N/mm2

Applicazioni Applications

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

Taglio dei materiali con R ≤ 650 N/mm2 quali acciai legati, ghise tutti i metalli in genere, la grafite. Precisione di foratura e costanza di rendimenti elevati. High precision and high performances in cutting alloy steel up to R ≤ 650 N/mm2.

144

Serie corta

ESECUZIONE RULLATA

M.K. l

L pcs.

5 6 6,25 6,5 6,75 7 7,25 7,5 7,75 8 8,25 8,5 8,75 9 9,25 9,5 9,75 10 10,25 10,5 10,75 11 11,25 11,5 11,75 12 12,25 12,5 12,75 13 13,25 13,5 13,75 14 14,25 14,5 14,75 15 15,25 15,5 15,75 16 16,25 16,5 16,75 17 17,25 17,5 17,75 18 18,25 18,5 18,75 19 19,25 19,5 19,75 20 20,25 20,5 20,75 21 21,25

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

52 133 57 138 63 144 63 144 69 150 69 150 69 150 69 150 75 156 75 156 75 156 75 156 81 162 81 162 81 162 81 162 87 168 87 168 87 168 87 168 94 175 94 175 94 175 94 175 94 175 101 182 101 182 101 182 101 182 101 182 108 189 108 189 108 189 108 189 114 212 114 212 114 212 114 212 120 218 120 218 120 218 120 218 125 223 125 223 125 223 125 223 130 228 130 228 130 228 130 228 135 233 135 233 135 233 135 233 140 238 140 238 140 238 140 238 145 243 145 243 145 243 145 243 150 248

Short serie

€

cod.

cad/each

M.K. l

L pcs.

010250500 010250600 010250625 010250650 010250675 010250700 010250725 010250750 010250775 010250800 010250825 010250850 010250875 010250900 010250925 010250950 010250975 010251000 010251025 010251050 010251075 010251100 010251125 010251150 010251175 010251200 010251225 010251250 010251275 010251300 010251325 010251350 010251375 010251400 010251425 010251450 010251475 010251500 010251525 010251550 010251575 010251600 010251625 010251650 010251675 010251700 010251725 010251750 010251775 010251800 010251825 010251850 010251875 010251900 010251925 010251950 010251975 010252000 010252025 010252050 010252075 010252100 010252125

10,510 10,510 10,510 10,510 10,510 10,510 10,510 10,510 10,510 10,510 10,414 10,414 10,414 10,414 10,414 10,414 10,414 10,414 10,829 10,829 10,829 10,829 11,586 11,586 11,586 11,586 12,042 12,042 12,317 12,317 17,451 14,806 17,451 14,806 18,833 16,004 20,580 17,451 20,840 17,752 20,840 17,752 23,538 19,967 23,538 19,967 25,454 21,584 25,454 21,584 26,822 22,690 26,822 22,690 27,824 23,615 27,824 24,241 33,835 29,193 33,835 30,066 35,449

21,5 21,75 22 22,25 22,5 22,75 23 23,25 23,5 23,75 24 24,25 24,5 24,75 25 25,25 25,5 25,75 26 26,25 26,5 26,75 27 27,25 27,5 27,75 28 28,25 28,5 28,75 29 29,25 29,5 29,75 30 30,25 30,5 30,75 31 31,25 31,5 31,75 32 32,25 32,5 32,75 33 33,25 33,5 33,75 34 34,25 34,5 34,75 35 35,25 35,5 35,75 36 36,25 36,5 36,75 37

2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

150 248 150 248 150 248 150 248 155 253 155 253 155 253 155 276 155 276 160 281 160 281 160 281 160 281 160 281 160 281 165 286 165 286 165 286 165 286 165 286 165 286 170 291 170 291 170 291 170 291 170 291 170 291 175 296 175 296 175 296 175 296 175 296 175 296 175 296 175 296 180 301 180 301 180 301 180 301 180 301 180 301 185 306 185 334 185 334 185 334 185 334 185 334 185 334 185 334 185 334 190 339 190 339 190 339 190 339 190 339 190 339 190 339 190 339 195 344 195 344 195 344 195 344 195 344

cod.

€ cad/each

010252150 30,706 010252175 35,449 010252200 30,706 010252225 40,077 010252250 34,657 010252275 40,077 010252300 34,657 010252325 45,487 010252350 41,732 010252375 45,487 010252400 41,732 010252425 48,235 010252450 43,400 010252475 48,235 010252500 43,400 010252525 47,910 010252550 47,910 010252575 58,050 010252600 52,784 010252625 59,782 010252650 54,361 010252675 55,259 010252700 55,259 010252725 64,109 010252750 58,284 010252775 64,109 010252800 58,284 010252825 69,063 010252850 62,741 010252875 73,076 010252900 66,442 010252925 75,318 010252950 68,463 010252975 75,318 010253000 68,463 010253025 86,266 010253050 82,146 010253075 86,266 010253100 82,146 010253125 92,732 010253150 88,312 010253175 112,214 010253200 112,214 010253225 115,595 010253250 115,595 010253275 118,444 010253300 118,444 010253325 123,175 010253350 123,175 010253375 129,340 010253400 129,340 010253425 133,224 010253450 133,224 010253475 139,558 010253500 139,558 010253525 143,779 010253550 143,779 010253575 162,103 010253600 162,103 010253625 164,932 010253650 164,932 010253675 164,932 010253700 164,932

Serie corta Short serie

€

M.K.

pcs.

cod.

cad/each

M.K.

pcs.

cod.

37,25 37,5 37,75 38 38,25 38,5 38,75 39 39,25 39,5 39,75 40 40,25 40,5 40,75 41 41,25 41,5 41,75 42 42,25 42,5 42,75 43 43,25 43,5 43,75 44 44,25 44,5 44,75 45 45,25 45,5 45,75 46 46,25 46,5 46,75 47 47,25 47,5 47,75 48 48,25 48,5 48,75 49 49,25 49,5 49,75 50 50,5 51 52 53 54 55 56 57 58 59 60

4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5

195 195 195 200 200 200 200 200 200 200 200 200 205 205 205 205 205 205 205 205 205 205 205 210 210 210 210 210 210 210 210 210 215 215 215 215 215 215 215 215 215 215 215 220 220 220 220 220 220 220 220 220 225 225 225 225 230 230 230 235 235 235 235

344 344 344 349 349 349 349 349 349 349 349 349 354 354 354 354 354 354 354 354 354 354 354 359 359 359 359 359 359 359 359 359 364 364 364 364 364 364 364 364 364 364 364 369 369 369 369 369 369 369 369 369 374 412 412 412 417 417 417 422 422 422 422

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

010253725 010253750 010253775 010253800 010253825 010253850 010253875 010253900 010253925 010253950 010253975 010254000 010254025 010254050 010254075 010254100 010254125 010254150 010254175 010254200 010254225 010254250 010254275 010254300 010254325 010254350 010254375 010254400 010254425 010254450 010254475 010254500 010254525 010254550 010254575 010254600 010254625 010254650 010254675 010254700 010254725 010254750 010254775 010254800 010254825 010254850 010254875 010254900 010254925 010254950 010254975 010255000 010255050 010255100 010255200 010255300 010255400 010255500 010255600 010255700 010255800 010255900 010256000

167,748 167,748 181,851 181,851 184,663 184,663 184,663 184,663 188,888 188,888 188,888 188,888 225,549 225,549 225,549 225,549 232,587 232,587 232,587 232,587 235,415 235,415 235,415 235,415 239,637 239,637 239,637 239,637 248,097 248,097 248,097 248,097 253,739 253,739 253,739 253,739 287,573 287,573 287,573 287,573 294,610 294,610 294,610 294,610 307,306 307,306 307,306 307,306 314,357 314,357 314,357 314,357 380,602 380,602 407,385 413,029 441,220 449,678 503,244 503,244 510,294 510,294 521,569

61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

240 240 240 245 245 245 245 250 250 250 250 255 255 255 255 260 260 260 260 260 265 265 265 265 265 270 270 270 270 270 275 275 275 275 275 280 280 280 280 280

427 427 427 432 432 432 432 437 437 437 437 442 442 442 442 447 514 514 514 514 519 519 519 519 519 524 524 524 524 524 529 529 529 529 529 534 534 534 534 534

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

010256100 010256200 010256300 010256400 010256500 010256600 010256700 010256800 010256900 010257000 010257100 010257200 010257300 010257400 010257500 010257600 010257700 010257800 010257900 010258000 010258100 010258200 010258300 010258400 010258500 010258600 010258700 010258800 010258900 010259000 010259100 010259200 010259300 010259400 010259500 010259600 010259700 010259800 010259900 0102510000

€ cad/each

708,970 750,989 750,989 750,989 750,989 945,291 945,291 945,291 945,291 1.107,933 1.148,062 1.194,276 1.240,490 1.311,035 1.335,356 1.452,104 1.498,319 1.545,745 1.616,291 1.662,505 1.756,147 1.779,253 1.849,789 1.849,789 1.872,893 1.920,334 1.943,442 1.990,868 2.037,082 2.037,082 2.201,270 2.294,910 2.318,018 2.318,018 2.365,446 2.432,337 2.482,204 2.528,418 2.713,271 4.472,822

145

146

UTENSILI CONICI E A GRADINO

CONICAL AND STEP DRILL BITS

147

UTENSILI CONICI INTEGRALI IN HSS-G CON SCALATURA ELICOIDALE E SPOGLIA MULTIPLA PER FORARE E ALLARGARE LAMIERE E TUBI Conical drill bits with spiral flute and multiple clearance for metal sheets and tubes

01182

HSS-G

INTERAMENTE RETTIFICATA

Confezione

Gr.

Packaging

1 2 3

AISI M2 HV:820 Gambo antisdrucciolo Spoglia multipla

Ø min - max

d mm

l mm

L mm

cod.

3 ÷ 14 6 ÷ 20 5 ÷ 31

6 8 10

35 45 80

60 70 105

0118201 0118202 0118203

High grip shank Multiple clearance

€ cad/each

31,186 46,885 100,811

Art. 01182100

€ 182,535

CBN

Composizione Description Gr.1 3÷14 mm Gr.2 6÷20 mm Gr.3 5÷31 mm

R ≤ 800 N/mm2

Applicazioni Applications

L Acciaio Steel

Metalli Metals

d Alu

Gr.1

Gr.2

Gr.3

Alluminio Aluminum

Plastica Plastic

Grande capacità di taglio, grande rendimento grazie alla nuova scanalatura a spirale e alla spoglia multipla. Usare una leggera pressione durante il taglio: l’elicoide è autoalimentante.

Emulsione Lubrificant

Better cutting performances due to the new spiral flute and multiple clearance. Please use a very soft press when drilling: the tool proceeds by itself.

Per forare lamiere in acciaio, tubi, profilati in acciaio e leghe leggere, plexiglass, plastica sino a 5 mm di spessore For hole-making into metal sheets, pipes, structurals, light alloys sheets, plastics, plexiglass up to 5 mm thickness

148

FRESA CONICA ALLARGAFORI PER LAMIERE, SPECIALE PER MECCANICI, ELETTRAUTO, CARROZZIERI Conical drill bits for metal sheets

01176

INTERAMENTE RETTIFICATA F

HSS

€

Øxl

cod.

cad/each

25 x 40 32 x 50 45 x 60

10 10 12

0117601 0117603 0117604

28,554 53,588 88,138

Øxl

cod.

cad/each

25 x 40

0117602

24,121

C.V. R ≤ 800 N/mm2

€

Applicazioni Applications

Acciaio Steel

Metalli Metals

Alu

n° 3

Alluminio Aluminum

Plastica Plastic

La fresa allargafori va usata con velocità massima di 420 giri/min per allargare fori in lamiere di materiali dolci con spessore inferiore a 0,5 mm. The conical drill bit shoud work at max 420 rpm to enlarge holes inside mild steel sheet 0,5 mm thick.

Emulsione Lubrificant

Art. 01177 Self Disponibile su richiesta On demand

149

UTENSILI CONICI PER FORARE ED ALLARGARE LAMIERE E TUBI Conical drill bits for metal sheets and tubes

01206

HSS-G

TiAlN

118°

Confezione Packaging

HSS-G+TiAlN HV 0,05 = 3300 Gambo antisdrucciolo High grip shank Uso intensivo Intensive use CBN

Gr.

Ø min - max

d mm

l mm

L mm

cod.

€

1 2 3 4 5 6 7 8

3 ÷ 14 6 ÷ 20 16 ÷ 30,5 26 ÷ 40 36 ÷ 50 40 ÷ 61 3 ÷ 31 3 ÷ 22,5

6 8 10 10 13 13 10 8

21 21 25 25 25 25 21 21

58 70 79 86 90 97 109 85

0120601 0120602 0120603 0120604 0120605 0120606 0120607 0120608

37,927 64,445 122,261 249,324 352,414 565,784 180,999 100,270

Gr.4

Gr.5

Gr.7 Lungo Long

Gr.8 Antenna

Gr.

Ø min - max

d mm

l mm

L mm

cod.

cad/each

1 2 3 4 5 6 7 8

3 ÷ 14 6 ÷ 20 16 ÷ 30,5 26 ÷ 40 36 ÷ 50 40 ÷ 61 3 ÷ 31 3 ÷ 22,5

6 8 10 10 13 13 10 8

21 21 25 25 25 25 21 21

58 70 79 86 90 97 109 85

0120001 0120002 0120003 0120004 0120005 0120006 0120007 0120008

cad/each

R ≤ 1400 N/mm2

Applicazioni Applications

Acciaio Steel

Inox Stainless

INOX

Metalli Metals

Emulsione Lubrificant

Alu

Alluminio Aluminum

Plastica Plastic

Gr.1

01200

HSS-G

118°

Gr.2

Confezione

HSS-G+TiN HV 0,05 = 2300 Gambo antisdrucciolo High grip shank Uso intensivo Intensive use CBN

R ≤ 1000 N/mm2

Applicazioni Applications

Alu

150

Gr.6

TiN

Packaging

INOX

Gr.3

Inox Stainless

Acciaio Steel

Metalli Metals

Alluminio Aluminum

Plastica Plastic

Emulsione Lubrificant

€ 32,856 55,810 103,055 219,615 315,308 512,839 164,997 88,841

UTENSILI CONICI PER FORARE ED ALLARGARE LAMIERE E TUBI Conical drill bits for metal sheets and tubes

01180

HSS-G

118°

Confezione Packaging

AISI M2 HV:820 Gambo antisdrucciolo High grip shank CBN

Gr.

Ø min - max

d mm

l mm

L mm

cod.

cad/each

€

1 2 3 4 5 6 7 8

3 ÷ 14 6 ÷ 20 16 ÷ 30,5 26 ÷ 40 36 ÷ 50 40 ÷ 61 3 ÷ 31 3 ÷ 22,5

6 8 10 10 13 13 10 8

21 21 25 25 25 25 21 21

58 70 79 86 90 97 109 85

0118001 0118002 0118003 0118004 0118005 0118006 0118007 0118008

22,82 37,81 64,93 135,38 208,72 358,20 97,30 69,10 Art. 01195101 € 148,635

R ≤ 800 N/mm2

Applicazioni Applications

Composizione

Acciaio Steel

Metalli Metals

Plastica Plastic

Emulsione Lubrificant

Description Gr.1 3÷14 mm Gr.2 6÷20 mm Gr.3 16÷30,5 mm

l Art. 01181 Self Disponibile su richiesta On demand

01215

HSS-G

ATTACCO 1/4 HE

FORM E PER AVVITATORI

Confezione

Ø min - max

8 ÷ 20

1/4

Packaging

Gr. 2

AISI M2 HV:820

l mm

L mm

cod.

cad/each

€

0121502

37,159

CBN

1/4" HEX FORM E

R ≤ 800 N/mm2

Applicazioni Applications

Plastica Plastic

Metalli Metals

Acciaio Steel

Emulsione Lubrificant

Campo di applicazione degli utensili conici rivestiti

Range of application for HSS conical drill-bits

HSS + TiAIN

HSS + TiN

HSS

Esigenze elevate (alti parametri di taglio, lavorazioni a secco con raffreddamento limitato) Severe applications (dry cutting parameter, high cutting parameters)

Utilizzo Intensivo (raffreddamento, bassi parametri di taglio) Intensive applications (low cutting parameters)

Esigenze Limitate (basse velocit e avanzamenti, utilizzo non intensivo) Non intensive applications

151

UTENSILI CONICI A GRADINO CON TAGLIENTI ELICOIDALI AD ALTO RENDIMENTO Spiral step drill bits

01248

HSS-G

118°

TiAlN Confezione Packaging

HSS-G+TiAlN HV 0,05=3300 Gambo antisdrucciolo High grip shank

Gr.

Ø min - max

2 4 6 9 11 24

4 ÷ 12 4 ÷ 20 4 ÷ 30 6 ÷ 36 4 ÷ 39 6 ÷ 38

Progressione Step

N° Gradini N° Step

d mm

L mm

cod.

cad/each

1 2 2 3 3 -

9 9 13 10 13 11

6 10 10 10 10 10

70 85 100 80 107 96

0124802 0124804 0124806 0124809 0124811 0124824

52,805 86,836 178,362 272,238 310,961 287,493

€

CBN

Art. 01259109

€ 309,201

Composizione Description Gr.2 4÷12 mm Gr.4 4÷20 mm Gr.6 4÷30 mm

d R ≤ 1400 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Emulsione Lubrificant Gr.2

01244

HSS-G

118°

Packaging

Gambo antisdrucciolo High grip shank

Gr.6

Gr.9

Gr.11

Gr.24

TiN Confezione

HSS-G+TIN HV 0,05=2300

Gr.4

Gr.

Ø min - max

2 4 6 9 11 24

4 ÷ 12 4 ÷ 20 4 ÷ 30 6 ÷ 36 4 ÷ 39 6 ÷ 38

Progressione Step

N° Gradini N° Step

d mm

L mm

cod.

cad/each

1 2 2 3 3 -

9 9 13 10 13 11

6 10 10 10 10 10

70 85 100 80 107 96

0124402 0124404 0124406 0124409 0124411 0124424

48,111 77,447 163,109 246,422 264,024 272,238

€

CBN

Art. 01259108

€ 291,013 R ≤ 1000 N/mm2

Composizione

Applicazioni Applications

INOX

152

Inox Stainless

Acciaio Steel

Metalli Metals

Emulsione Lubrificant

Description Gr.2 4÷12 mm Gr.4 4÷20 mm Gr.6 4÷30 mm

UTENSILI CONICI A GRADINO CON TAGLIENTI ELICOIDALI AD ALTO RENDIMENTO Spiral step drill bits

01240

HSS-G

118°

Confezione Packaging

HSS-G HV 820 Gambo antisdrucciolo High grip shank CBN

Gr.

Ø min - max

2 4 6 9 11 24

4 ÷ 12 4 ÷ 20 4 ÷ 30 6 ÷ 36 4 ÷ 39 6 ÷ 38

Progressione Step

N° Gradini N° Step

d mm

L mm

cod.

cad/each

1 2 2 3 3 -

9 9 13 10 13 11

6 10 10 10 10 10

70 85 100 80 107 96

0124002 0124004 0124006 0124009 0124011 0124024

43,652 54,565 145,507 177,033 194,010 196,433

€

Art. 01259107

€ 194,791 R ≤ 800 N/mm2

Composizione Description Gr.2 4÷12 mm Gr.3 4÷20 mm Gr.4 4÷30 mm

Applicazioni Applications

Acciaio Steel

Metalli Metals

Plastica Plastic

Emulsione Lubrificant

01241

HSS-G

118°

ATTACCO 1/4 HE Confezione Packaging

HSS-G HV 820

Gr.

Ø min - max

4 6

4 ÷ 20 4 ÷ 30

FORM E PER AVVITATORI Progressione Step

N° Gradini N° Step

2 2

9 13

d 1/4 1/4

l mm

L mm

cod.

cad/each

€

25 25

76 100

0124104 0124106

46,938 126,731

Gambo antisdrucciolo High grip shank CBN

1/4" HEX FORM E

Spoglia assiale Axial relief

R ≤ 800 N/mm2

Spoglia radiale Radial relief

Applicazioni Applications

Componente di taglio Cutting strength

Acciaio Steel

Metalli Metals

Plastica Plastic

Emulsione Lubrificant

Forza applicata / Strength Componente estrazione truciolo Chip removal strength

Esercitare solo una lieve pressione durante il taglio. L’elicoide è autoalimentante grazie alla componente assiale della forza di taglio.

28 26

Please use a very soft press while drilling. The tool proceeds by itself, due to the axial cutting strenght.

24 8 6

153

UTENSILI CONICI INTEGRALI A GRADINO PER LA FORATURA ED ALLARGATURA DELLA LAMIERA HSS step drill bits

01236

HSS-G

TiAlN

118°

Confezione Packaging

HSS-G + TiAIN HV 0,05 = 3300 Gambo antisdrucciolo High grip shank Uso intensivo Intensive use CBN

Gr.

Ø min - max

1 2 3 4 5 6 7 8 9 * 10 11 24

4 ÷ 12 4 ÷ 12 12 ÷ 20 4 ÷ 20 20 ÷ 30 4 ÷ 30 30 ÷ 40 40 ÷ 50 6 ÷ 36 25 ÷ 58 4 ÷ 39 6 ÷ 38

Progressione Step

N° Gradini N° Step

d mm

L mm

cod.

cad/each

2 1 1 2 1 2 1 1 3 3 3 -

5 9 9 9 11 13 11 11 10 12 13 11

6 6 10 10 10 10 13 13 10 13 10 10

56 70 85 85 97 97 97 100 80 90 107 96

0123601 0123602 0123603 0123604 0123605 0123606 0123607 0123608 0123609 0123610 0123611 0123624

52,232 53,583 134,253 88,704 231,346 177,408 332,031 453,108 278,094 619,722 290,082 281,695

€

Per tubi di conduzione elettrica For electrical conduction tubes

21 22 23

6,3 ÷ 26,75 6 ÷ 30,5 6 ÷ 37

PG 7 7 7

10 10 10

91 80 85

214,567 153,438 294,871

0123621 0123622 0123623

d R ≤ 1200 N/mm2

n° 4

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Alluminio Aluminum

4 5 6 7 8 9 20 11 12

4 6 8 10 12

Metalli Metals

Alu

n° 5

Gr.1

Gr.2

4 6 8 10 12

12 13 14 15 16 17 18 19 20

4 5 6 7 8 9 20 11 12

Gr.3 Gr.1

Gr.4 Gr.2

Gr.3

Gr.5

Gr.6

Gr.4

Gr.5

Emulsione Lubrificant

6 9 12 15 18 21 24 27 30 33 36

Gr.9

Gr.10

Gr.11

For parallel and precise holes in metal sheets, pipes, structurals, light alloys, plastics, plexiglass up to 5 mm thickness.

154

4 6 8 10 12 14 16 18 20 22 24 26 28 30

30 31 32 33 34 35 36 37 38 39 40

Gr.7 Gr.7

4 PG 6,3 6 9 11,4127 14 159 1811 17,25 21 19 24 13,5 27 16 21,25 30 26,75 3321 36 39

Gr.21

Gr.10

Gr.11

40 41 42 43 44 45 46 47 48 49 50

Gr.8

PG 6,0 6,3 12,5 7 11,4 15,2 7 9 18,6 11 14 20,4 9 13,5 17,2522,5 11 16 28,3 21 19 30,5 13,5

PG 6,0 12,5 7 6,0 15,2 9 18,6 11 12,5 720,4 13,5 15,2 922,5 16 18,6 11 28,3 21 20,4 13,5 30,6 22,5 16 37 29 28,3 21 30,5

21,25 16 26,75 21

Gr.22 Gr.21

PG13 16 19 6,0 21 12,5 7 23 15,2 9 26 18,6 1129 20,4 13,5 32 22,5 1635 28,3 2138 30,6 37 29

Gr.23 Gr.22

* Punta a centrare per utensile conico Gr. 10 Pilot drill for Gr.10 step drill bit

40 41 42 43 44 45 46 47 48 49 50

Gr.8

Gr.6

4 6 9 12 15 2518 2821 3124 34 3727 4030 43 4633 4936 5239 55 58

25 28 31 34 37 40 43 46 49 52 55 58

Gr.9

Per fori cilindrici e precisi in lamiere di acciaio, tubi, profilati, leghe leggere, plastica, plexiglass sino a 5 mm spessore.

4 6 8 10 12 20 14 21 16 22 18 23 20 24 22 25 24 26 26 27 28 28 30 29 30

20 21 22 423 624 825 26 10 27 12 28 14 29 16 30 18 20

4 6 8 10 12 12 14 13 14 16 15 18 16 20 17 18 19 20

Gr.24 Gr.23

Gr.24

€

ØxL

cod.

cad/each

Ø 8x48

0118300

33,553

UTENSILI CONICI INTEGRALI A GRADINO PER LA FORATURA ED ALLARGATURA DELLA LAMIERA HSS step drill bits

01230

HSS-G

TiN Confezione Packaging

HSS-G+TiN HV 0,05=2300 Gambo antisdrucciolo High grip shank

CBN

Gr.

Ø min - max

1 2 3 4 5 6 7 8 9 * 10 11 24

4 ÷ 12 4 ÷ 12 12 ÷ 20 4 ÷ 20 20 ÷ 30 4 ÷ 30 30 ÷ 40 40 ÷ 50 6 ÷ 36 25 ÷ 58 4 ÷ 39 6 ÷ 38

Progressione Step

N° Gradini N° Step

d mm

L mm

cod.

cad/each

2 1 1 2 1 2 1 1 3 3 3 -

5 9 9 9 11 13 11 11 10 12 13 11

6 6 10 10 10 10 13 13 10 13 10 10

56 70 85 85 97 97 97 100 80 90 107 96

0123001 0123002 0123003 0123004 0123005 0123006 0123007 0123008 0123009 0123010 0123011 0123024

47,457 48,929 123,470 79,119 212,164 158,225 302,065 417,145 252,925 564,575 254,122 252,925

Per tubi di conduzione elettrica For electrical conduction tubes 21 22 23

R ≤ 1000 N/mm2

6,3 ÷ 26,75 6 ÷ 30,5 6 ÷ 37

€

PG 7 7 7

10 10 10

91 80 85

0123021 0123022 0123023

190,586 147,441 264,905

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Alluminio Aluminum

01183

Alu

Per fori cilindrici e precisi in lamiere di acciaio, tubi, profilati, leghe leggere, plastica, plexiglass sino a 5 mm spessore.

HSS-G

118°

Confezione Packaging

AISI M2 HV:820 Gambo antisdrucciolo High grip shank CBN 13 16 19 21 23 26 29 32 35 38

For parallel and precise holes in metal sheets, pipes, structurals, light alloys, plastics, plexiglass up to 5 mm thickness.

Emulsione Lubrificant

Gr.

Ø min - max

1 2 3 4 5 6 7 8 9 * 10 11 24

4 ÷ 12 4 ÷ 12 12 ÷ 20 4 ÷ 20 20 ÷ 30 4 ÷ 30 30 ÷ 40 40 ÷ 50 6 ÷ 36 25 ÷ 58 4 ÷ 39 6 ÷ 38

Progressione Step

N° Gradini N° Step

d mm

L mm

cod.

cad/each

2 1 1 2 1 2 1 1 3 3 3 -

5 9 9 9 11 13 11 11 10 12 13 11

6 6 10 10 10 10 13 13 10 12 10 10

56 70 85 85 97 97 97 100 80 90 107 96

0118301 0118302 0118303 0118304 0118305 0118306 0118307 0118308 0118309 0118310 0118311 0118324

30,472 33,143 85,518 44,617 135,309 99,090 196,942 285,354 180,867 458,175 170,136 156,745

€

R ≤ 800 N/mm2

Applicazioni Applications

Alu

Acciaio Steel

Metalli Metals

Alluminio Aluminum

Emulsione Lubrificant

Per tubi di conduzione elettrica For electrical conduction tubes 21 22 23

6,3 ÷ 26,75 6 ÷ 30,5 6 ÷ 37

PG 7 7 7

10 10 10

91 80 85

0118321 0118322 0118323

125,936 112,533 170,136

Art. 01184 Self Disponibile su richiesta On demand

155

UTENSILI CONICI INTEGRALI A GRADINO PER LA FORATURA ED ALLARGATURA DELLA LAMIERA HSS step drill bits

SET

HSS-G

Art. 01259102 Abs

Art. 01259105

Composizione

€ 183,056

€ 168,799

Description Gr.2 4÷12 mm Gr.4 4÷20 mm Gr.6 4÷30 mm

Description Gr.2 4÷12 mm Gr.3 12÷20 mm Gr.5 20÷30 mm

Art. 01259103

€ 279,220 TiN

Composizione Description Gr.2 Gr.4 Gr.6

01239

HSS-G

4÷12 mm 4÷20 mm 4÷30 mm

ATTACCO 1/4 HE

AISI M2 HV:820

FORM E PER AVVITATORI

Gr.

Ø min - max

2 4 6

4 ÷ 12 4 ÷ 20 4 ÷ 30

Progressione Step

N° Gradini N° Step

d mm

L mm

cod.

cad/each

1 2 2

9 9 13

1/4 1/4 1/4

68 78 101

0123902 0123904 0123906

29,813 40,452 89,768

€

CBN

1/4" HEX FORM E

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Alu

156

Alluminio Aluminum

Metalli Metals

Per fori cilindrici e precisi in lamiere di acciaio, tubi, profilati, leghe leggere, plastica, plexiglass sino a 5 mm spessore.

Plastica Plastic

For parallel and precise holes in metal sheets, pipes, structurals, light alloys, plastics, plexiglass up to 5 mm thickness.

Emulsione Lubrificant

Art. 01259118 Abs

€ 164,896

Composizione Description Gr.2 4÷12 mm Gr.4 4÷20 mm Gr.6 4÷30 mm

UTENSILI CONICI UNIVERSALI PER PREFORI DI FILETTATURA DI TUBI PER CAVI DI CONDUZIONE ELETTRICA niversal step drill bits for cables connections

0125405

0125406

HSS-G

Metrica Uni ersale Art. 0125405

Metrica Uni ersale Art. 0125406

Composizione

€ 188,272

METRICA DIN-EN 60423

TiN

HSS-G

Confezione Packaging

€ 291,079

Description Ø 7 ÷ 40,5 mm M 12 x 1,5 ÷ 40 x 1,5

95 mm

Combinato UNI ERSALE per fori nocciolo e fori passanti DIN EN 60423 Combined UNIVERSAL: for core holes and through holes DIN EN 60423 M DIN-EN 60423

n°55

n° 4

CBN

n° 6 12 X 1.5 16 X 1.5 20 X 1.5 25 X 1.5 32 X 1.5

n 6

12 X 1.5 16 X 1.5 20 X 1.5 n 7 25 X 1.5

32 X 1.5 40 X 1.5

40 X 1.5

UNIVERSALE: n COMBINATO per fori nocciolo (quando è prevista la successiva filettatura) e fori passanti (quando si inserisce un raccordo filettato serrato con un relativo dado).

NIVERSAL COMBINED: for core holes (when the thread is needed) and through holes (when inserting a threaded connection with a relative nut).

12mm

12 0°

0125403 PG Drill Uni ersal Art. 0125403

€ 174,843

PG DIN-EN 40430

HSS-G PG DIN-EN 40430

Confezione Packaging

°7

Composizione

Description Ø 8 ÷ 37 mm Pg 7 ÷ 29

100 mm

Foro passante Through holes

118°

n° 8

12,5 ± 0,05 15,2 ± 0,05 18,6 ± 0,05 20,4 ± 0,05 22,5 ± 0,05 28,3 ± 0,05

PG 7 nPG 89 PG 11 PG 13,5 PG 16 PG 21

37 ± 0,05

PG 29

Preforo maschiatura Core holes

Ø8 PG 7 PG 9 PGn11 9 PG 13,5 PG 16 PG 21 PG 29

12mm

11,4 ± 0,05 14 ± 0,05 17,25 ± 0,05 19 ± 0,05 21,25 ± 0,05 26,75 ± 0,05 (31 ± 0,05) 34 ± 0,05

12 0°

Combinato UNI ERSALE per fori nocciolo e fori passanti DIN EN 40430 Combined UNIVERSAL: for core holes and through holes DIN EN 40430

157

158

TRAPANI A BASE MAGNETICA MAGNETIC DRILLS

159

TRAPANO CON BASE MAGNETICA PER FRESE A CAROTARE FINO A Ø 32 mm, VELOCITÀ VARIABILE ED INVERSIONE DI ROTAZIONE Magnetic drill for max Ø 32 mm annular cutters, adjustable speed and R/L rotation

28011202 32 mm

13 mm

kg 11 Kg

40 mm

M12

kg 1000 W 1500Kg

150 mm

Velocità Inversione variabile di rotazione

Capacità di foratura Drilling capacity Frese a carotare (Ø max) Annular cutters (Ø max) Punte elicoidali (Ø max) Twist drills (Ø max) Svasatori (Ø max) Countersinks (Ø max) Maschi (Ø) Machine taps (Ø)

12 – 32 mm 1 – 13 mm 10 – 40 mm M3 - M12

Dimensioni trapano Drilling machine dimensions Altezza Height Lunghezza Lenght Larghezza Width Corsa Stroke Peso Weight Magnete (L x W x H) Magnet (L x W x H) Forza del magnete Magnetic force Potenza del motore Motor power Tensione Voltage Velocità (a vuoto) Speed (no load) Velocità (sotto carico 1000W, 9,1A) Speed (loaded 1000W, 9,1A) Attacco Spindle

Art. 28011202

€ 2.300,000

TRAPANI MAGNETICI MAGNETIC DRILLS

CONTENUTO DELLA CONFEZIONE: 1 x trapano a base magnetica 1 x protezione di sicurezza 3 x maniglie 3 x adattatori Weldon per maschi con gambo Ø 7,8,9 1 chiave esagonale da 2,5 mm 1 chiave esagonale da 3 mm 1 chiave esagonale da 4 mm 1 chiave esagonale da 5 mm 1 x sistema di lubrificazione 1 x catena di sicurezza 1 x manuale d’uso (I-E) 1 x espulsore

160

CASE CONTENT: 1 x magnetic drilling machine 1 x safety guard 3 x handles 3 x tap holder (Weldon) for taps with shank Ø 7,8,9 1 x hex key 2.5 mm 1 x hex key 3 mm 1 x hex key 4 mm 1 x hex key 5 mm 1 x lubrication system 1 x safety chain 1 x user manual 1 x ejector

370 - 512 mm 320 mm 210 mm 150 mm 11 Kg

160x80x42 mm 1500 Kg 1000 W 220-240 AC / 50-60 Hz 100 - 600 rpm 225 rpm Weldon 19,05 mm

FULL32T: SCHEMA D'UTILIZZO DEGLI ACCESSORI FULL32T: accessories usage diagram

Art. 28015010 (incluso / included) Adattatore per maschi con gambo Ø 7 mm Adaptor for taps with Ø 7 mm shank

Art. 28015001 Adattatore Weldon 19.05 Quick-in Adaptor Weldon 19.05 Quick-in

Art. 28015011 (incluso / included) Adattatore per maschi con gambo Ø 8 mm Adaptor for taps with Ø 8 mm shank

Art. 28015004 Adattatore Weldon 19.05 - 1/2 UNF Adaptor Weldon 19.05 - 1/2 UNF

Art. 28015012 (incluso / included) Adattatore per maschi con gambo Ø 9 mm Adaptor for taps with Ø 9 mm shank

WELDON

TRAPANI MAGNETICI MAGNETIC DRILLS

Mandrino attacco 1/2 x 20 UNF Chuck attachment 1/2 x 20 UNF

Quick-IN

161

TRAPANO CON BASE MAGNETICA PER FRESE A CAROTARE FINO A Ø 50 mm, DUE VELOCITÀ Magnetic drill for max Ø 50 mm annular cutters, 2 gears

28011201 50 mm

Capacità di foratura Drilling capacity Frese a carotare (Ø max) Annular cutters (Ø max) Punte elicoidali (Ø max) Twist drills (Ø max) Svasatori (Ø max) Countersinks (Ø max)

Art. 28011201

€ 1.500,000

50 mm 2 velocità

13,5 Kg

1200 W 1600 Kg 170 mm

12 – 50 mm 1 – 20 mm 10 – 50 mm

Dimensioni trapano Drilling machine dimensions Altezza Height Lunghezza Lenght Larghezza Width Corsa Stroke Peso Weight

20 mm

385 - 550 mm 320 mm 210 mm 170 mm 13,5 Kg

Magnete (L x W x H) Magnet (L x W x H) Forza del magnete Magnetic force Potenza del motore Motor power Tensione Voltage Velocità (a vuoto) Speed (no load) Velocità (sotto carico) Speed (loaded) Attacco Spindle

168x84x49 mm 1600 Kg 1200 W 220-240 AC / 50-60 Hz 380 rpm / 690 rpm 235 rpm /425 rpm Weldon 19,05 mm

PURE.50: SCHEMA D'UTILIZZO DEGLI ACCESSORI PURE.50: accessories usage diagram

Art. 28015001 Adattatore Weldon 19.05 - Quick-in Adaptor Weldon 19.05 - Quick-in

Art. 28015004 Adattatore Weldon 19.05 - 1/2 UNF Adaptor Weldon 19.05 - 1/2 UNF

Mandrino attacco 1/2 x 20 UNF Mandrino attacco 1/2 x 20 UNF

CONTENUTO DELLA CONFEZIONE: 1 x trapano magnetico 1 x protezione di sicurezza 3 x maniglie 1 chiave esagonale da 2,5 mm 1 chiave esagonale da 3 mm 1 chiave esagonale da 4 mm 1 chiave esagonale da 5 mm 1 x sistema di lubrificazione 1 x catena di sicurezza 1 x manuale d’uso 1 x espulsore

TRAPANI MAGNETICI MAGNETIC DRILLS

CASE CONTENT: 1 x magnetic drilling machine 1 x safety guard 3 x handles 1 x hex key 2.5 mm 1 x hex key 3 mm 1 x hex key 4 mm 1 x hex key 5 mm 1 x lubrication system 1 x safety chain 1 x user manual 1 x ejector WELDON

162

Quick-IN

TRAPANO CON BASE MAGNETICA PER FRESE A CAROTARE FINO A Ø 35 mm Magnetic drill for max Ø 35 mm annular cutters

28011200 35 mm

Capacità di foratura Drilling capacity Frese a carotare (Ø max) Annular cutters (Ø max) Punte elicoidali (Ø max) Twist drills (Ø max) Svasatori (Ø max) Countersinks (Ø max)

kg 8,5 Kg

Art. 28011200

€ 1.000,000

35 mm

kg 850 W

1000 Kg 90 mm

12 – 35 mm 1 – 13 mm 10 – 35 mm

Dimensioni trapano Drilling machine dimensions Altezza Height Lunghezza Lenght Larghezza Width Corsa Stroke Peso Weight

13 mm

293 - 383 mm 265 mm 175 mm 90 mm 8,5 Kg

160x81x36 mm 1000 Kg 850 W 220-240 AC / 50-60 Hz 750 rpm 400 rpm Weldon 19,05 mm

PURE.35: SCHEMA D'UTILIZZO DEGLI ACCESSORI PURE.35: accessories usage diagram

Art. 28015001 Adattatore Weldon 19.05 - Quick-in Adaptor Weldon 19.05 - Quick-in

WELDON

TRAPANI MAGNETICI MAGNETIC DRILLS

163

ACCESSORI PER L’UTILIZZO DELLE FRESE A CAROTARE Accessories for core drills

28012

MANDRINO SENZA LUBRIFICAZIONE INTERNA Holder without lubrication

Weldon

pcs.

cod.

cad/each

2 3

160 175

12÷60 12÷60

1 1

28012001 28012002

199,015 199,015

MANDRINO CON LUBRIFICAZIONE INTERNA Holder with lubrication

OIL

001 002

164

001 002

WELDON 19,05

28013

€

003 004

€

Weldon

pcs.

cod.

cad/each

2 3

160 160

12÷60 12÷60

1 1

28013001 28013002

284,299 284,299

2 3

160 160

12÷60 12÷60

1 1

28013003 28013004

312,501 312,501

ACCESSORI PER L’UTILIZZO DELLE FRESE A CAROTARE Accessories for core drills

28015

ADATTATORI Adaptors

WELDON 19,05

cod.

cad/each

1 1 1

28015001 28015002 28015004

65,439 64,422 23,093

pcs.

cod.

cad/each

63 mm 83 mm 83 mm 93 mm 93 mm 93 mm 60 mm

1 1 1 1 1 1 1

28016001 28016002 28016003 21216000 21216001 21216002 21218000

12,686 14,720 16,859 25,816 25,816 25,816 7,139

WELDON - 18 Quick IN 18 Quick IN - WELDON WELDON - 1/2 UNF

Quick-IN

€

pcs.

001

Quick-IN

WELDON 19,05

002

WELDON 19,05

1/2 UNF

004

ESPULSORI Ejector Non adatti all uso con adattatori art. 28015 They cannot be used with adaptors item n. 28015

Ø 6,35 x 77 6,35 x 102 6,35 x 123 6,35 x 112 7,1 x 112 8,0 x 112 8,0 x 90

€

165

166

FRESE E SEGHE A TAZZA

HOLE SAWS FOR METAL CUTTING

167

VISIONE D'INSIEME: FRESE E SEGHE A TAZZA

ALLUMINIO E LEGHE ALLUMINIUM

R≤N/mm²

COD.

21216

170

50 mm

QUICK-IN QUICK-IN

12÷60

1200

21212

171

25 mm

WELDON WELDON

19÷36

1200

21218

172

50 mm

QUICK-IN QUICK-IN

12÷50

1200

21211

173

HSS-Co AISI 30 mm M35

WELDON WELDON

12÷60

1200

21206

174

50 mm

WELDON WELDON

12÷60

1200

21207

175

30 mm

WELDON WELDON

12÷60

850

21200

176

50 mm

WELDON WELDON

12÷60

850

21202

177

5 mm

SERIE LUNGA LONG SERIE

20÷100

1300

21042

178

5 mm

15÷150

1300

21040

179

5 mm

15÷130

1100

21043

180

5 mm

12÷80

1000

21011

181

TiAlN

5 mm

12÷100

1300

21325

182

5 mm

12÷100

1000

21300

183

10÷120

800

21001

184

IMAGE

RANGE

SHANK / SERIES

MATERIAL THICKNESS

MATERIAL

ANNULAR CUTTERS

TCT

MATTONI MASONRY

OTTONE BRASS

1200

PIASTRELLE TILES

LAMIERE IRON

MARMO E GRANITO MARBLE AND GRANIT

ACCIAO <800 N/mm STEEL <800 N/mm

PLASTICA, LAMINATI, CARTONGESSO PLASTER BOARD

ACCIAO <1200 N/mm STEEL <1200 N/mm

LEGNO DOLCE SOFT WOOD

ARD , LD HARDOX, WELDOX 400

LEGNO DURO HARD WOOD

INOX STAINLESS STEEL

IMMAGINE

GAMMA DISPONIBILE (Ø MIN÷ MAX mm)

ATTACCO / SERIE

12÷80

SPESSORE LAVORABILE

WELDON SERIE LUNGA WELDON LONG SERIES

MATERIALE

50 mm

TiN

Overview: Hole saws

HSS-G

HOLE SAWS

TCT

HSS-Co AISI M35

HSS-G

5 mm

168

COD.

R≤N/mm²

MATTONI MASONRY

PLASTICA, LAMINATI, CARTONGESSO PLASTER BOARD

PIASTRELLE TILES

LEGNO DOLCE SOFT WOOD

MARMO E GRANITO MARBLE AND GRANIT

LEGNO DURO HARD WOOD

ALLUMINIO E LEGHE ALLUMINIUM

MATERIAL THICKNESS

OTTONE BRASS

DENTE RINFORZATO ALTE PRESTAZIONI SISTEMA K-LOCK REINFORCED TOOTH HIGH PERFORMANCE K-LOCK SYSTEM

LAMIERE IRON

14÷305

ACCIAO <800 N/mm STEEL <800 N/mm

ACCIAO <1200 N/mm STEEL <1200 N/mm

16÷114

ARD , LD HARDOX, WELDOX 400

PER MATERIALI EDILI PER MATERIALI EDILI

INOX STAINLESS STEEL

5 mm

1200

05078

187

1200

21100

186

1200

21105

188

IMAGE

19÷108

IMMAGINE

UNIVERSALE UNIVERSAL

RANGE

GAMMA DISPONIBILE (Ø MIN÷ MAX mm)

20 mm

FEATURES

SPECIALITÀ

19÷152

SPESSORE LAVORABILE

MATERIAL

MATERIALE

PER LEGNO FOR WOOD

50 mm

TCT 4 mm

acciaio steel

BIMETAL HOLE SAWS

legno wood

HSS-Co 3 mm acciaio steel 8% 20 mm M42 legno wood 4 mm

acciaio steel

30 mm legno wood

3 mm

acciaio steel

20 mm

HSS M3

1000

21090

190

16÷133

850

21058

195

14÷305

800

21060

196

ALBERO FISSO ALBERO FISSO

16÷102

800

21061

200

14÷210

750

21067

201

ALTE PRESTAZIONI ALTE PRESTAZIONI

14÷152

1000

21073

204

14÷152

1000

21065

205

SPECIALE LAMIERE SOTTILI ATTACCO 1/4" HEX. SPECIALE LAMIERE SOTTILI ATTACCO 1/4" HEX.

16÷38

1000

21069

208

legno wood

3 mm

acciaio steel

20 mm legno wood

3 mm

acciaio steel

20 mm

BIMETAL HOLE SAWS

legno wood

4 mm

acciaio steel

30 mm legno wood

HSS-Co 3 mm acciaio steel 8% 20 mm M42 legno wood

2 mm

169

FRESE A CAROTARE CON TAGLIENTI IN METALLO DURO, ATTACCO WELDON PER TRAPANI A BASE MAGNETICA Weldon shank carbide tip core drill for magnetic drilling machines

21216

Attacco Weldon - Serie lunga

TCT

Confezione Packaging

Inserti in metallo duro Carbide tips

WELDON 19.05

L = 93 l = 70

Weldon shank - Long serie

€

cod.

cad/each

cod.

cad/each

12 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38

70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70

93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93

212161200 212161400 212161500 212161600 212161700 212161800 212161900 212162000 212162100 212162200 212162300 212162400 212162500 212162600 212162700 212162800 212162900 212163000 212163100 212163200 212163300 212163400 212163500 212163600 212163700 212163800

106,913 106,913 106,913 106,913 106,913 106,913 106,913 109,295 109,295 109,295 109,295 109,295 109,295 119,984 119,984 119,984 128,305 128,305 133,057 133,057 149,685 149,685 149,685 149,685 149,685 149,685

39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 65 70 75 80

70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70

93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93

212163900 212164000 212164100 212164200 212164300 212164400 212164500 212164600 212164700 212164800 212164900 212165000 212165100 212165200 212165300 212165400 212165500 212165600 212165700 212165800 212165900 212166000 212166500 212167000 212167500 212168000

149,685 149,685 171,064 171,064 171,064 171,064 171,064 192,444 192,444 192,444 192,444 192,444 236,401 236,401 236,401 236,401 236,401 261,349 261,349 261,349 261,349 261,349 285,111 355,201 380,148 402,725

Ø per frese Ø lorem ipsum

cod.

cad/each

Ø 6,35 x 112 mm

Ø 12mm

21216000

25,816

Ø 7,1 x 112 mm

Ø 14÷16 mm

21216001

25,816

Ø 8,0 x 112 mm

Ø 17÷80 mm

21216002

25,816

R ≤ 1200 N/mm2

€

Applicazioni Applications

INOX Cu Zn Ni Ms

Acciaio Steel

Alu

Alluminio Aluminum

Inox Stainless

Leghe leggere Light alloys

Acciaio accoppiato Stacked steel

Spessore lavorabile Material tickness workable

S max 50

Hardox Weldox 400

Emulsione Lubrificant

Art. 21210308

€ 1.828,278 16 pcs Ø 14 - 15 - 16 - 17 18 - 19 - 20 - 21 22 - 23 - 24 - 25 28 - 30 - 32 - 35

170

FRESE A CAROTARE CON TAGLIENTI IN METALLO DURO, ATTACCO UICK-IN 18 MM PER TRAPANI A BASE MAGNETICA Quick-IN 18 mm shank carbide tip core drill for magnetic drilling machines

21212

Attacco Quick-in - Serie lunga

TCT

Quick-IN shank - Long serie

Confezione

Packaging

Inserti in metallo duro Carbide tips

€

cod.

cad/each

cod.

cad/each

12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65

88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88

212121200 212121300 212121400 212121500 212121600 212121700 212121800 212121900 212122000 212122100 212122200 212122300 212122400 212122500 212122600 212122700 212122800 212122900 212123000 212123100 212123200

75,935 75,935 75,935 75,935 75,935 75,935 75,935 75,935 75,935 75,935 75,935 75,935 75,935 75,935 82,771 82,771 82,771 82,771 82,771 99,473 99,473

33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 55 60

65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65

88 88 88 88 88 88 88 88 8 88 88 88 88 88 88 88 88 88 88 88

212123300 212123400 212123500 212123600 212123700 212123800 212123900 212124000 212124100 212124200 212124300 212124400 212124500 212124600 212124700 212124800 212124900 212125000 212125500 212126000

99,473 99,473 99,473 113,903 113,903 113,903 113,903 113,903 135,925 135,925 135,925 135,925 135,925 156,425 156,425 156,425 156,425 156,425 176,932 194,392

QUICK-IN

€

n° 8

n 8

L = 90 l = 67

Ø 6,35 x 102

cad/each

28016002

14,720

n° 7

cod.

R ≤ 1200 N/mm2

Acciaio accoppiato Stacked steel

Applicazioni

Spessore lavorabile Material tickness workable

INOX Cu Zn Ni Ms

Acciaio Steel

Alu

Alluminio Aluminum

Inox Stainless

Hardox Weldox 400

S max 50

Applications

Leghe leggere Light alloys

Emulsione Lubrificant

Art. 21210310

€ 1.275,701 16 pcs Ø 14 - 15 - 16 - 17 18 - 19 - 20 - 21 22 - 23 - 24 - 25 28 - 30 - 32 - 35

Consigliate per il taglio molto veloce, economico e con grande rendimento in acciaio inox, acciai refrattari, acciai resistenti agli acidi, HARDOX®, WELDOX®400, tutti gli acciai in genere, ghisa… Particolarmente adatto al taglio delle putrelle e delle rotaie. The core drills allow a very fast and economical cut in stainless steel, acid resistant steel, HARDOX®, WELDOX®400, steel and cast iron Suitable for cut iron beam and rails. Nota: HARDOX® è un acciaio resistente all’abrasione è identificato solitamente da un numero che ne indica la durezza (HBW). WELDOX® è un acciaio ad alta resistenza, identificato da un numero che ne fornisce la resistenza a snervamento (MPa). Note: HARDOX® is an abrasion resistant steel it’s defined by a number which gives its hardness (HBW). WELDOX® is a structural-high strength steel it’s defined by a number which gives its yield strength (MPa).

171

Weldon shank carbide tip core drill for magnetic drilling machines

21218

Attacco Weldon - Speciale rotaie

TCT Confezione Packaging

WELDON 19.05

Weldon shank - Special for rails

cod.

cad/each

19 20 21 22 23 24 25 26 26,5 27 27,5 28 29 30 31 32 33 34 35 36

37 37 37 37 37 37 37 37 37 37 37 37 37 37 37 37 37 37 37 37

60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60

212181900 212182000 212182100 212182200 212182300 212182400 212182500 212182600 212182650 212182700 212182750 212182800 212182900 212183000 212183100 212183200 212183300 212183400 212183500 212183600

96,800 96,800 97,637 97,637 98,949 98,949 100,383 101,112 101,112 101,396 101,396 102,332 102,332 103,881 106,381 107,657 110,415 111,434 113,439 119,787

n 9

Ø Ø 8 x 90

Spessore lavorabile Material tickness workable

R ≤ 1200 N/mm

S max 25

Applicazioni Applications

Hardox Weldox 400 Acciaio Steel

Alu

172

Alluminio Aluminum

INOX

Inox Stainless

Cu Zn Ni Ms

Leghe leggere Light alloys

Emulsione Lubrificant

€

S max 25

SPECIALE PER ROTAIE SPECIAL FOR RAILS

FRESE A CAROTARE CON DENTI IN METALLO DURO, ATTACCO WELDON PER TRAPANI CON BASE MAGNETICA - SPECIALI PER ROTAIE

€

cod.

cad/each

21218000

7,139

FRESE A CAROTARE IN HSS-CO 5 CON ATTACCO PER TRAPANI CON BASE MAGNETICA

UICK-IN 18 mm

Quick-IN 18 mm shank carbide tip core drill for magnetic drilling machines

21211

Attacco

HSS-CO 5% Confezione Packaging

QUICK-IN

L = 90 l = 67

n 21

R ≤ 850 N/mm2

cod.

cad/each

12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

67 67 67 67 67 67 67 67 67 67 67 67 67 67 67 67 67 67 67 67 67 67 67 67 67 67 67 67 67 67 67 67 67 67 67 67 67 67 67

90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90

2121101200 2121101300 2121101400 2121101500 2121101600 2121101700 2121101800 2121101900 2121102000 2121102100 2121102200 2121102300 2121102400 2121102500 2121102600 2121102700 2121102800 2121102900 2121103000 2121103100 2121103200 2121103300 2121103400 2121103500 2121103600 2121103700 2121103800 2121103900 2121104000 2121104100 2121104200 2121104300 2121104400 2121104500 2121104600 2121104700 2121104800 2121104900 2121105000

63,720 66,051 66,051 69,276 69,276 77,148 77,148 80,377 86,589 92,695 100,243 100,243 107,682 116,011 116,011 122,117 128,327 128,327 134,656 144,312 145,980 145,980 152,309 156,522 166,966 166,966 174,290 178,502 181,506 188,200 192,417 203,109 209,817 225,351 235,904 244,539 258,796 267,561 278,536

Ø Acciaio Steel

Leghe leggere Light alloys Alu

Emulsione Lubrificant

Ø 6,35 x 102

€

cod.

cad/each

28016002

14,720

Alluminio Aluminum Acciaio accoppiato Stacked steel

Spessore lavorabile Material tickness workable

Art. 21210309

€ 1.608,228 S max 50

Cu Zn Ni Ms

€

Applications

Inox Stainless

IN - Serie lunga

Applicazioni

INOX

UIC

QUICK-IN shank - Long serie

16 pcs Ø 14 - 15 - 16 - 17 18 - 19 - 20 - 21 22 - 23 - 24 - 25 28 - 30 - 32 - 35

Consigliate per il taglio molto veloce, economico e con grande rendimento in acciaio inox, acciai da costruzione, ferro, ghisa, leghe leggere e metalli non ferrosi in genere. Particolarmente adatto al taglio di piatti e lamiere di grandi spessori,tubi, putrelle e profilati. The core drills allow a very fast and economical cut in stainless steel, structural steel, iron, cast iron, light alloys and nonferrous metals. Special for very thick metal plates and sheets, pipes, iron beam and structural steel.

173

FRESE A CAROTARE IN HSS-CO 5 CON ATTACCO PER TRAPANI A BASE MAGNETICA

ELDON

Weldon shank HSS-CO 5% core drills for magnetic drilling machines

21206

Attacco Weldon - Serie corta

HSS-CO 5% Confezione Packaging

WELDON 19.05

Weldon shank - Short serie

€

cod.

cad/each

cod.

cad/each

12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40

63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63

212061200 212061300 212061400 212061500 212061600 212061700 212061800 212061900 212062000 212062100 212062200 212062300 212062400 212062500 212062600 212062700 212062800 212062900 212063000 212063100 212063200

43,801 46,583 52,185 55,909 58,710 58,710 58,830 60,106 61,853 63,641 65,518 67,474 71,721 73,759 84,833 87,735 90,345 92,082 94,692 99,028 102,502

33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 55 60

40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40

63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63

212063300 212063400 212063500 212063600 212063700 212063800 212063900 212064000 212064100 212064200 212064300 212064400 212064500 212064600 212064700 212064800 212064900 212065000 212065500 212066000

109,963 115,554 120,203 124,861 130,462 135,121 140,713 145,361 150,964 157,488 162,148 169,597 180,688 184,163 187,638 191,110 195,457 198,931 235,414 362,214

L = 63 l = 40

n 22

cad/each

6,35 x 77

28016001

12,686

Vantaggi Advantages

Spessore lavorabile Material tickness workable

S max 30

Acciaio accoppiato Stacked steel

€

cod.

R ≤ 1200 N/mm2

Applicazioni Applications

INOX Cu Zn Ni Ms

Inox Stainless

Acciaio Steel

Leghe leggere Light alloys Alu

Alluminio Aluminum

Art. 21210306

Art. 21210406

16 pcs

6 pcs

Ø 14 - 15 - 16 - 17 18 - 19 - 20 - 21 22 - 23 - 24 - 25 28 - 30 - 32 - 35

Ø 12 - 14 - 16 18 - 20 - 22

€ 1.156,158

€ 384,888

1 pcs

Emulsione Lubrificant

Le frese a carotare al cobalto 5% permettono un taglio molto veloce ed economico nell’acciaio inox, acciaio da costruzione, ferro, ghisa, leghe leggere e metalli non ferrosi in genere. Speciale per piatti e lamiere di grande spessore, tubi, putrelle e profilati. The 5% cobalt core drills allow a very fast and economical cut in, stainless steel, structural steel, iron, cast iron, light alloys and non-ferrous metals. Special for very thick metal plates and sheets, pipes, iron beam and structural steel.

174

FRESE A CAROTARE IN HSS-CO 5 CON ATTACCO PER TRAPANI A BASE MAGNETICA

ELDON

Weldon shank HSS-CO 5% core drills for magnetic drilling machines

21207

Attacco Weldon - Serie lunga

HSS-CO 5% Confezione Packaging

Weldon shank - Long serie

€

cod.

cad/each

cod.

cad/each

12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60

83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83

212071200 212071300 212071400 212071500 212071600 212071700 212071800 212071900 212072000 212072100 212072200 212072300 212072400 212072500 212072600 212072700 212072800 212072900 212073000 212073100 212073200

61,527 62,800 73,741 74,944 79,961 83,002 86,815 88,332 90,619 92,906 95,185 97,474 102,804 105,091 121,841 124,893 127,173 130,222 133,264 139,356 142,407

33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 55 60

60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60

83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83

212073300 212073400 212073500 212073600 212073700 212073800 212073900 212074000 212074100 212074200 212074300 212074400 212074500 212074600 212074700 212074800 212074900 212075000 212075500 212076000

145,448 148,500 151,540 156,949 160,506 164,360 166,824 169,054 196,473 200,276 204,091 207,894 248,250 252,065 255,870 260,436 264,249 268,816 316,790 375,274

Ø WELDON 19.05

6,35 x 102

€

cod.

cad/each

28016002

14,720

L = 83 l = 60

Acciaio accoppiato Stacked steel

Vantaggi Advantages

Spessore lavorabile Material tickness workable

S max 50

R ≤ 1200 N/mm2

Applicazioni Applications

INOX Cu Zn Ni Ms

Inox Stainless

Acciaio Steel

Leghe leggere Light alloys

Alluminio Aluminum

Alu

Art. 21210307

Art. 21210407

16 pcs

6 pcs

Ø 14 - 15 - 16 - 17 18 - 19 - 20 - 21 22 - 23 - 24 - 25 28 - 30 - 32 - 35

Ø 12 - 14 - 16 18 - 20 - 22 1 pcs

€ 1.625,258

€ 518,239

Emulsione Lubrificant

175

FRESE A CAROTARE IN HSS-G CON ATTACCO PER TRAPANI A BASE MAGNETICA

ELDON

Weldon shank HSS core drills for magnetic drilling machines

21200

Attacco Weldon - Serie corta

HSS-G Confezione Packaging

WELDON 19.05

L = 63

Weldon shank - Short serie

€

cod.

cad/each

cod.

cad/each

12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34

40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40

63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63

212001200 212001300 212001400 212001500 212001600 212001700 212001800 212001900 212002000 212002100 212002200 212002300 212002400 212002500 212002600 212002700 212002800 212002900 212003000 212003100 212003200 212003300 212003400

27,985 28,725 33,711 34,452 36,736 38,385 40,210 41,252 42,504 43,705 44,997 46,323 49,232 50,641 58,266 59,830 61,457 63,137 64,888 67,997 69,782 71,616 73,483

35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 60

40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40

63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63

212003500 212003600 212003700 212003800 212003900 212004000 212004100 212004200 212004300 212004400 212004500 212004600 212004700 212004800 212004900 212005000 212005100 212005200 212005300 212005400 212005500 212006000

75,424 77,448 79,513 82,037 84,477 86,104 99,100 101,531 103,159 105,598 124,281 126,721 129,151 131,592 134,021 136,463 148,448 151,358 154,278 157,179 161,643 190,891

l = 40

n 22

cad/each

6,35 x 77

28016001

12,686

Vantaggi Advantages

Spessore lavorabile Material tickness workable

S max 30

Acciaio accoppiato Stacked steel

€

cod.

R ≤ 850 N/mm2

Applicazioni Applications

Acciaio Steel

Alu

Alluminio Aluminum

Cu Zn Ni Ms

Leghe leggere Light alloys

Emulsione Lubrificant

Art. 21210300

Art. 21210400

16 pcs

6 pcs

Ø 14 - 15 - 16 - 17 18 - 19 - 20 - 21 22 - 23 - 24 - 25 28 - 30 - 32 - 35

Ø 12 - 14 - 16 18 - 20 - 22

€ 773,697

€ 296,449

1 pcs

Le frese a carotare permettono un taglio molto veloce ed economico nel ferro,acciaio da costruzione, ghisa, leghe leggere e metalli non ferrosi in genere. Speciale per piatti e lamiere di grande spessore, tubi, putrelle e profilati. The core drills allow a very fast and economical cut in, structural steel, iron, cast iron, light alloys and non-ferrous metals. Special for very thick metal plates and sheets, pipes, iron beam and structural steel.

176

FRESE A CAROTARE IN HSS-G CON ATTACCO PER TRAPANI A BASE MAGNETICA

ELDON

Weldon shank HSS core drills for magnetic drilling machines

21202

Attacco Weldon - Serie lunga

HSS-G Confezione Packaging

Weldon shank - Long serie

€

cod.

cad/each

cod.

12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34

60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60

83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83

212021200 212021300 212021400 212021500 212021600 212021700 212021800 212021900 212022000 212022100 212022200 212022300 212022400 212022500 212022600 212022700 212022800 212022900 212023000 212023100 212023200 212023300 212023400

38,885 39,677 46,624 47,376 50,328 52,372 54,603 55,699 57,044 58,339 59,715 61,133 64,837 66,317 77,259 78,699 80,868 82,309 87,368 88,086 90,255 91,696 93,866

35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 60

60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60

83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83

212023500 212023600 212023700 212023800 212023900 212024000 212024100 212024200 212024300 212024400 212024500 212024600 212024700 212024800 212024900 212025000 212025100 212025200 212025300 212025400 212025500 212026000

€ cad/each

96,034 98,194 100,363 102,533 104,691 106,860 124,187 126,356 129,245 131,404 156,679 159,566 161,736 164,625 167,515 177,685 206,640 212,220 217,812 223,392 223,392 239,070

WELDON 19.05

Ø 6,35 x 102

L = 83

€

cod.

cad/each

28016002

14,720

l = 60

Vantaggi Advantages

Spessore lavorabile Material tickness workable

S max 50

Acciaio accoppiato Stacked steel

R ≤ 850 N/mm2

Applicazioni Applications

Acciaio Steel

Alu

Alluminio Aluminum

Cu Zn Ni Ms

Leghe leggere Light alloys

Emulsione Lubrificant

Art. 21210302

Art. 21210402

16 pcs

6 pcs

Ø 14 - 15 - 16 - 17 18 - 19 - 20 - 21 22 - 23 - 24 - 25 28 - 30 - 32 - 35

Ø 12 - 14 - 16 18 - 20 - 22

€ 1.028,914

€ 323,180

1 pcs

177

FRESE A TAZZA TCT AD ALBERO MOBILE PER FORARE LAMIERE, TUBI, PROFILATI IN ACCIAIO INOX E ACCIAI DURI TRATTATI Tungsten carbide tipped hole saws for stainless and hard metal sheets

21042

Serie lunga

TCT

Long serie

Confezione Packaging

€

cod.

cad/each

cod.

cad/each

20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 13 13 13 13 13 13

2104202000 2104202100 2104202200 2104202300 2104202400 2104202500 2104202600 2104202700 2104202800 2104202900 2104203000 2104203100 2104203200 2104203300 2104203400 2104203500 2104203600 2104203700 2104203800 2104203900 2104204000 2104204100 2104204200 2104204300 2104204400

44,875 44,875 44,875 44,875 44,875 44,875 51,706 51,706 51,706 51,706 51,706 60,564 60,564 60,564 60,564 60,564 68,433 68,433 68,433 68,433 68,433 81,280 81,280 81,280 81,280

45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 65 70 75 80 85 90 95 100

13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13

2104204500 2104204600 2104204700 2104204800 2104204900 2104205000 2104205100 2104205200 2104205300 2104205400 2104205500 2104205600 2104205700 2104205800 2104205900 2104206000 2104206500 2104207000 2104207500 2104208000 2104208500 2104209000 2104209500 2104210000

81,280 90,616 90,616 90,616 90,616 90,616 104,431 104,431 104,431 104,431 104,431 118,235 118,235 118,235 118,235 139,819 139,819 151,031 162,251 175,198 196,773 210,586 221,806 238,205

Inserti in metallo duro Carbide tips

60 mm 40 mm

€

pcs.

cod.

cad/each

21045098

0,706

R ≤ 1300 N/mm2

Gambo Arbor

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals Cu Zn Ni Ms

Alu

Leghe leggere Light alloys

Alluminio Aluminum

Plastica Plastic

Per frese Fit hole cutters

cod.

cad/each

Ø 15 ÷ 21 Ø 22 ÷ 38 Ø 39 ÷ 100

10 10 13

15 19 22

12 x 1,5 14 x 1,5 14 x 1,5

21045120 21045121 21045122

9,009 10,927 13,508

Punta pilota AISI M2 Pilot drill Ø

€

ØxL

cod.

cad/each

Ø 6 x 78

21045102

13,964

Emulsione Lubrificant

S max 5

Spessore lavorabile Material tickness workable

La speciale geometria variabile dei denti in metallo duro di altissima qualità consente il taglio altamente professionale e con grande rendimento in tubi, profilati e lamiere in acciaio inox, acciai alto-legati e materiali composti ad elevata resistenza. The special variable geometry of the high-quality tungsten carbide teeth makes it possible to realise a very professional and efficient cut in pipes, structural sections and metal sheets in stainless steel, high-alloy steel and high-resistance materials.

178

FRESE A TAZZA TCT AD ALBERO MOBILE PER FORARE LAMIERE IN ACCIAIO INOX, ACCIAI DURI TRATTATI Tungsten carbide tipped hole saws for stainless and hard metal sheets

21040

Serie corta

TCT

Short serie

Confezione Packaging

Inserti in metallo duro Carbide tips

50 mm 28 mm

R ≤ 1300 N/mm2

Applicazioni

€

cod.

cad/each

cod.

cad/each

15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 13 13 13 13 13 13 13 13 13 13

2104001500 2104001600 2104001700 2104001800 2104001900 2104002000 2104002100 2104002200 2104002300 2104002400 2104002500 2104002600 2104002700 2104002800 2104002900 2104003000 2104003100 2104003200 2104003300 2104003400 2104003500 2104003600 2104003700 2104003800 2104003900 2104004000 2104004100 2104004200 2104004300 2104004400 2104004500 2104004600 2104004700

35,199 35,199 35,199 35,199 36,728 36,728 36,728 36,728 37,492 37,492 37,492 44,231 44,231 44,231 44,231 44,231 51,511 51,511 51,511 51,511 51,511 59,690 59,690 59,690 59,690 59,690 68,357 68,357 68,357 68,357 68,357 79,294 79,294

48 49 50 51 52 53 54 55 56 57 58 59 60 63 65 70 75 76 80 85 90 95 100 *105 *110 *115 *120 *125 *130 *135 *140 *145 *150

13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13

2104004800 2104004900 2104005000 2104005100 2104005200 2104005300 2104005400 2104005500 2104005600 2104005700 2104005800 2104005900 2104006000 2104006300 2104006500 2104007000 2104007500 2104007600 2104008000 2104008500 2104009000 2104009500 2104010000 2104010500 2104011000 2104011500 2104012000 2104012500 2104013000 2104013500 2104014000 2104014500 2104015000

79,294 79,294 79,294 89,268 89,268 89,268 89,268 89,268 107,124 107,124 107,124 107,124 120,832 120,832 120,832 120,832 156,429 169,373 169,373 186,639 201,734 212,529 229,785 287,679 294,871 338,026 363,206 370,811 385,661 399,697 424,599 439,087 449,410

*Integrale / One piece

Applications

Inox Stainless

Acciaio Steel

INOX

Alluminio Aluminum

Metalli Metals

Leghe leggere Light alloys

Emulsione Lubrificant

€

pcs.

cod.

cad/each

21045098

0,706

Alu

Gambo Arbor

Plastica Plastic

Spessore lavorabile Material tickness workable

S max 5

Cu Zn Ni Ms

€

cod.

cad/each

Ø 15 ÷ 21 Ø 22 ÷ 38 Ø 39 ÷ 100

10 10 13

15 19 22

12 x 1,5 14 x 1,5 14 x 1,5

21045120 21045121 21045122

9,009 10,927 13,508

ØxL

cod.

cad/each

6 x 62 8 x 62

21045100 21045101

9,009 12,920

Punta pilota AISI M2 Pilot drill Ø

Art. 21055302

Art. 21055303

8 pcs Ø 51 ÷ 54 mm

8 pcs Ø 54 ÷ 57 mm

Ø 51 ÷ 54 mm

Ø 54 ÷ 57 mm

€ 315,168

Per frese Fit hole cutters

€ 315,168

Per frese Fit hole cutters

Ø 15 ÷ 100 Ø 105 ÷ 120

Art. 21055130

€ 1.324,994

210705546B

Ø 6 ÷ 8 mm

HM4 Ø 12

28 pcs Ø 15 ÷ 40 x 1 + 45 - 50mm

€

Art. 21055300

€ 364,403

8 pcs Ø 16 - 18 - 20 - 22 25 - 30 - 32 - 35

179

FRESE A TAZZA TCT AD ALBERO FISSO PER FORARE LAMIERE, TUBI, PROFILATI IN ACCIAIO INOX E ACCIAI DURI TRATTATI Tungsten carbide tipped hole saws for stainless and hard metal sheets

21043

Serie corta

TCTlite

TCT

Short serie

Confezione Packaging

cod.

cad/each

cod.

cad/each

12 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

2104301200 2104301400 2104301500 2104301600 2104301700 2104301800 2104301900 2104302000 2104302100 2104302200 2104302300 2104302400 2104302500 2104302600 2104302700 2104302800 2104302900 2104303000 2104303100 2104303200 2104303300 2104303400 2104303500 2104303600 2104303700 2104303800 2104303900 2104304000 2104304100 2104304200 2104304300

9,000 13,550 14,400 15,350 16,350 17,350 18,300 19,250 20,200 21,200 22,150 23,100 24,100 25,050 26,000 27,000 27,950 28,900 29,950 30,850 31,800 32,700 33,750 34,700 35,650 36,600 37,650 38,600 39,500 40,450 41,450

44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

2104304400 2104304500 2104304600 2104304700 2104304800 2104304900 2104305000 2104305100 2104305200 2104305300 2104305400 2104305500 2104305600 2104305700 2104305800 2104306000 2104306500 2104307000 2104307500 2104308000 2104308500 2104309000 2104309500 2104310000 2104310500 2104311000 2104311500 2104312000 2104312500 2104313000

42,350 43,300 44,300 45,250 46,250 47,200 48,150 49,150 50,200 51,100 52,100 53,000 54,200 55,050 56,800 57,900 67,250 71,650 76,600 81,200 86,700 92,250 97,500 102,550 113,650 118,700 124,550 128,400 133,950 139,350

79 mm 34 mm

Spessore lavorabile Material tickness workable

S max 5

€

Inserti in metallo duro Carbide tips

€

Art. 21055305

€ 200,000

8 pcs Ø 16 - 18 - 20 - 22 25 - 30 - 32 - 35

R ≤ 1100 N/mm2

Applicazioni Applications

Inox Stainless

Acciaio Steel

INOX

Alluminio Aluminum Alu

Plastica Plastic

180

Cu Zn Ni Ms

Leghe leggere Light alloys

Emulsione Lubrificant

FRESE A TAZZA IN HSS-CO 5 RETTIFICATE PER FORARE LAMIERE IN ACCIAIO INOX, ACCIAI ALTAMENTE LEGATI, FERRO, LEGHE LEGGERE E METALLI IN GENERE. HSS-CO fully ground hole cutters

21011

HSS-CO 5%

AISI M35

Confezione Packaging

HRC 64 ÷ 65

23 mm

€

cod.

cad/each

cod.

cad/each

12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38

4 4 4 4 4 4 4 6 6 6 6 6 6 6 8 8 8 8 8 10 10 10 10 10 10 10 10

2101101200 2101101300 2101101400 2101101500 2101101600 2101101700 2101101800 2101101900 2101102000 2101102100 2101102200 2101102300 2101102400 2101102500 2101102600 2101102700 2101102800 2101102900 2101103000 2101103100 2101103200 2101103300 2101103400 2101103500 2101103600 2101103700 2101103800

22,933 22,933 23,425 23,425 23,425 23,425 23,425 24,168 25,613 26,798 28,036 30,221 30,711 31,746 33,865 34,390 35,797 37,088 37,731 39,272 40,457 41,764 43,204 45,922 48,140 48,670 49,972

39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 65 70 75 80

10 12 12 12 12 14 14 14 14 14 14 14 16 16 16 16 16 16 16 16 16 16 18 18 20 20

2101103900 2101104000 2101104100 2101104200 2101104300 2101104400 2101104500 2101104600 2101104700 2101104800 2101104900 2101105000 2101105100 2101105200 2101105300 2101105400 2101105500 2101105600 2101105700 2101105800 2101105900 2101106000 2101106500 2101107000 2101107500 2101108000

54,196 54,196 54,882 58,103 60,145 61,240 64,764 64,764 65,331 75,000 77,000 82,000 85,863 87,654 89,845 93,331 94,990 95,631 95,631 99,354 102,547 110,000 132,227 141,830 152,746 170,726

€

pcs.

cod.

cad/each

21005098

0,706

Spessore lavorabile Material tickness workable

S max 5

Gambo Arbor d

R ≤ 1000 N/mm2

Applicazioni Inox Stainless

Acciaio Steel

INOX

Alu

Emulsione Lubrificant

cod.

cad/each

Ø 12 ÷ 14 Ø 15 ÷ 34 Ø 35 ÷ 50 Ø 51 ÷ 120

56 56 56 60

8 10 10 12

10 x 1,25 12 x 1,25 14 x 1,5 16 x 1,5

21005099 21005100 21005102 21005101

5,841 5,841 8,749 8,749

Punta pilota AISI M35 Pilot drill

Applications

Alluminio Aluminum

Per frese Fit hole cutters

Cu Zn Ni Ms

Per frese Fit hole cutters

Ø 12 ÷ 80

€

ØxL

cod.

cad/each

6 x 52

21005115

4,511

Leghe leggere Light alloys Art. 21012300

Art. 21012301

8 pcs Ø 16 - 18 - 20 - 22 25 - 30 - 32 - 35

6 pcs Ø 16 - 18 - 20 22 - 25 - 30

€ 287,676

€ 191,787

FRESE A TAZZA IN HSS-G RETTIFICATE RIVESTITE AL TIALN PER FORARE LAMIERE IN ACCIAIO ALTOLEGATO, ACCIAIO INOX, FERRO, TUTTI I MATERIALI METALLICI, PLASTICA DURA HSS-G+TiAlN fully ground hole cutters

21325

HSS-G

TiAlN

Confezione Packaging

HSS-G+TiAlN HV 0,05 3300 23 mm

€

cod.

cad/each

12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

2132501200 2132501300 2132501400 2132501500 2132501600 2132501700 2132501800 2132501900 2132502000 2132502100 2132502200 2132502300 2132502400 2132502500 2132502600 2132502700 2132502800 2132502900 2132503000 2132503100 2132503200 2132503300 2132503400 2132503500 2132503600 2132503700 2132503800 2132503900 2132504000

33,098 33,098 33,098 33,098 35,900 35,900 35,900 37,477 37,477 38,919 38,919 41,708 41,708 41,708 44,510 44,510 44,510 44,510 46,257 46,257 46,257 46,257 46,257 46,257 54,244 54,244 54,244 59,825 59,825

41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 65 70 75 80 85 90 95 100

€

cod.

cad/each

2132504100 2132504200 2132504300 2132504400 2132504500 2132504600 2132504700 2132504800 2132504900 2132505000 2132505100 2132505200 2132505300 2132505400 2132505500 2132505600 2132505700 2132505800 2132505900 2132506000 2132506500 2132507000 2132507500 2132508000 2132508500 2132509000 2132509500 2132510000

67,003 67,003 69,399 69,399 73,379 73,379 73,379 78,972 78,972 78,972 79,924 79,924 79,924 79,924 79,924 82,239 82,239 82,239 82,239 82,239 117,835 125,139 134,961 147,224 164,398 177,896 187,719 201,207

S max 5

Spessore lavorabile Material tickness workable

Ø _> 20mm Gambo Arbor

R ≤ 1300 N/mm2

Applicazioni

Applications

Inox Stainless INOX

Metalli Metals

Acciaio Steel

Ø L

cad/each

21005098

0,706

cod.

cad/each

Ø 12 ÷ 14 Ø 15 ÷ 34 Ø 35 ÷ 50 Ø 51 ÷ 100

56 56 56 60

8 10 10 12

10 x 1,25 12 x 1,25 14 x 1,5 16 x 1,5

21005099 21005100 21005102 21005101

5,841 5,841 8,749 8,749

Per frese Fit hole cutters

Ø 12 ÷ 100

€

ØxL

cod.

cad/each

6 x 52

21005115

4,511

Art. 21335100

Art. 21335102

€ 251,729

39 pcs Ø 12 ÷ 50 x 1 mm

21 pcs Ø 18 ÷ 35 x 1 + 36 - 38 - 40 mm

6 pcs Ø 16 - 18 - 20 22 - 25 - 30

Art. 21335101

Art. 21335300

Art. 21335301

8 pcs Ø 16 - 18 - 20 - 22 25 - 30 - 32 - 35

€ 329,637

cod.

Per frese Fit hole cutters

Punta pilota AISI M35 Pilot drill

Plastica Plastic

€

pcs.

€ 1.985,832

€ 937,713

€ 1.408,328

31 pcs Ø 12 ÷ 40 x 1 + 45-50 mm

Frese a tazza HSS+TiAIN: più si “scalda”, più rende. È un esclusivo rivestimento PVD che permette il taglio a secco ad elevati parametri di taglio e con rendimenti eccezionali nell’acciaio inox e in tutti i materiali in genere. HSS+TiAIN hole cutters: The more it “heats” the more it performs. It is a special PVD Coating which allows the dry cut with high cutting parameters, and a great performance while drilling into the stainless steel and all kind of materials.

182

FRESE A TAZZA IN HSS-G RETTIFICATE RIVESTITE AL TIN PER FORARE LAMIERE IN ACCIAIO ALTOLEGATO, ACCIAIO INOX, FERRO, TUTTI I MATERIALI METALLICI, PLASTICA DURA HSS-G+TiN fully ground hole cutters

21300

HSS-G

TiN

Confezione Packaging

HSS-G+TiN HV 0,05 2300 23 mm

€

cod.

cad/each

12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

2130001200 2130001300 2130001400 2130001500 2130001600 2130001700 2130001800 2130001900 2130002000 2130002100 2130002200 2130002300 2130002400 2130002500 2130002600 2130002700 2130002800 2130002900 2130003000 2130003100 2130003200 2130003300 2130003400 2130003500 2130003600 2130003700 2130003800 2130003900 2130004000

28,432 28,432 28,432 28,432 31,308 31,308 31,308 31,308 31,308 34,241 34,241 37,045 37,045 37,045 39,887 39,887 39,887 39,887 41,177 41,177 41,177 41,177 41,177 41,177 49,931 49,931 49,931 55,692 55,692

41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 65 70 75 80 85 90 95 100

€

cod.

cad/each

2130004100 2130004200 2130004300 2130004400 2130004500 2130004600 2130004700 2130004800 2130004900 2130005000 2130005100 2130005200 2130005300 2130005400 2130005500 2130005600 2130005700 2130005800 2130005900 2130006000 2130006500 2130007000 2130007500 2130008000 2130008500 2130009000 2130009500 2130010000

61,793 61,793 64,281 64,281 67,754 67,754 67,754 72,940 72,940 72,940 78,175 78,175 78,175 78,175 78,175 79,466 79,466 79,466 79,466 79,466 105,984 112,006 120,700 132,000 147,231 159,917 168,800 181,496

S max 5

Spessore lavorabile Material tickness workable

Ø _> 20mm Gambo Arbor

R ≤ 1000 N/mm2

Applicazioni

Applications

Inox Stainless INOX

Metalli Metals

Acciaio Steel

Ø L

cod.

cad/each

21005098

0,706

Per frese Fit hole cutters

cod.

cad/each

Ø 12 ÷ 14 Ø 15 ÷ 34 Ø 35 ÷ 50 Ø 51 ÷ 100

56 56 56 60

8 10 10 12

10 x 1,25 12 x 1,25 14 x 1,5 16 x 1,5

21005099 21005100 21005102 21005101

5,841 5,841 8,749 8,749

Punta pilota AISI M35 Pilot drill

Plastica Plastic

€

pcs.

Per frese Fit hole cutters

Ø 12 ÷ 100

€

ØxL

cod.

cad/each

6 x 52

21005115

4,511

Emulsione Lubrificant

Art. 21320300

Art. 21320301

8 pcs Ø 16 - 18 - 20 - 22 25 - 30 - 32 - 35

6 pcs Ø 16 - 18 - 20 22 - 25 - 30

€ 293,675

€ 221,762

Art. 21320100

Art. 21320101

39 pcs Ø 12 ÷ 50 x 1 mm

31 pcs Ø 12 ÷ 40 x 1 + 45-50 mm

€ 1.692,540

€ 1.222,655

Art. 21320102

€ 863,047

21 pcs Ø 18 ÷ 35 x 1 + 36 - 38 - 40 mm

Il Rivestimento in Nitruro di Titanio, elevando la durezza superficiale e riducendo notevolmente il coefficiente di attrito, permette il taglio negli acciai alto legati ed in particolare nell’acciaio inox. Le frese al TiN sono, inoltre molto adatte per il taglio dell’alluminio e di tutti i materiali abrasivi (plastica dura, vetroresina). Naturalmente, il rendimento nel taglio degli acciai dolci è elevatissimo. The Titanium Nitride Coating allows high performances in stainless steel cutting, low alloy steel cutting. Aluminium and abrasive materials such as fiberglass. 183

FRESE A TAZZA IN HSS-G RETTIFICATE PER FORARE LAMIERE IN ACCIAIO, FERRO, LEGHE LEGGERE, TUTTI I MATERIALI METALLICI, PLASTICA DURA HSSG fully ground hole cutters

21001

HSS-G

Confezione Packaging

€

cod.

cad/each

cod.

cad/each

*10 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

5 5 5 6 6 6 6 6 8 8 8 8 8 8 8 10 10 10 10 10 12 12 12 12 12 12 12 12 12 14

2100101000 2100101200 2100101300 2100101400 2100101500 2100101600 2100101700 2100101800 2100101900 2100102000 2100102100 2100102200 2100102300 2100102400 2100102500 2100102600 2100102700 2100102800 2100102900 2100103000 2100103100 2100103200 2100103300 2100103400 2100103500 2100103600 2100103700 2100103800 2100103900 2100104000

18,346 17,641 17,641 18,019 18,019 18,019 18,019 18,019 18,591 19,702 20,614 21,566 23,247 23,624 24,420 26,050 26,454 27,536 28,529 29,024 30,209 31,121 32,126 33,234 34,016 35,659 36,052 37,016 40,145 40,145

41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 65 70 75 80 85 90 95 100 120

14 14 14 16 16 16 16 16 16 16 18 18 18 18 18 18 18 18 18 18 20 20 22 22 24 24 24 24 30

2100104100 2100104200 2100104300 2100104400 2100104500 2100104600 2100104700 2100104800 2100104900 2100105000 2100105100 2100105200 2100105300 2100105400 2100105500 2100105600 2100105700 2100105800 2100105900 2100106000 2100106500 2100107000 2100107500 2100108000 2100108500 2100109000 2100109500 2100110000 2100112000

40,653 41,502 42,961 43,743 46,260 46,260 46,665 49,389 50,315 50,315 61,331 62,610 64,175 66,665 67,850 68,308 68,308 70,967 73,248 73,248 94,448 101,307 109,104 121,947 137,527 152,299 163,589 176,277 313,544

HSS-G HRC 64 Taglio laterale: miglior estrazione dei trucioli Side cut: easy chips removal

23 mm

€

*Integrale *One piece

S max 5

Spessore lavorabile Material tickness workable

Ø _> 20mm R ≤ 800 N/mm2

Gambo Arbor

Applicazioni Applications

d Acciaio Steel

Metalli Metals

Plastica Plastic

Emulsione Lubrificant

184

cad/each

21005098

0,706

cod.

cad/each

Ø 12 ÷ 14 Ø 15 ÷ 34 Ø 35 ÷ 50 Ø 51 ÷ 120

56 56 56 60

8 10 10 12

10 x 1,25 12 x 1,25 14 x 1,5 16 x 1,5

21005099 21005100 21005102 21005101

5,841 5,841 8,749 8,749

Per frese Fit hole cutters

€

cod.

cad/each

4 x 50 6 x 52

21005109 21005110

2,101 3,104

Ø 10 Ø 12 ÷ 120

Prolunga 400mm Extension 400mm

Per frese Fit hole cutters

cod.

cad/each

Ø 15 ÷ 34 Ø 35 ÷ 50 Ø 51 ÷ 120

400 400 400

13 13 13

12 x 1,25 14 x 1,5 16 x 1,5

21005120 21005122 21005121

33,340 33,340 33,340

Upgrade teeth design and side cut: easy chips removal with high cutting performances

cod.

Per frese Fit hole cutters

Punta Pilota AISI M2 Arbor

Innovativo disegno dei denti e taglio laterale: migliore scarico dei trucioli con grande rendimento del taglio.

€

pcs.

d L

€

ASSORTIMENTI FRESE PERFORATRICI A TAZZA IN HSS-G HSS-G hole-cutters sets

HSS-G Art. 21010100

Art. 21010102

39 pcs Ø 12 ÷ 50 x 1 mm

21 pcs Ø 18 ÷ 35 x 1 + 36 - 38 - 40 mm

Art. 21010101

Art. 21010104

31 pcs Ø 12 ÷ 40 x 1 + 45-50 mm

11 pcs Ø 16 - 18 - 20 - 21 - 22 - 25 27 - 28 - 30 - 32 - 35 mm

€ 1.222,517

€ 861,030

€ 580,901

Art. 21010300

Art. 21010301

8 pcs Ø 16 - 18 - 20 - 22 25 - 30 - 32 - 35 mm

6 pcs Ø 16 - 18 - 20 22 - 25 - 30 mm

€ 228,455

€ 270,490

€ 169,223

Guida alla scelta della tazza Choosing chart

Esigenze Elevate elevati parametri di taglio High cutting parameters

Acciaio inox AISI 304-308-316

High alloy steel Stainless steel

Stainless steel AISI 304-308-316

HSS - TIALN 21325

TCT 21040 21042 21043

Acciaio legati-inox

Utilizzo Intensivo Intensive use

Alloy steel Stainless steel

Acciaio basso legati Low alloy steel

HSS 21001

HSS - TIN 21300 HSS - CO 21011

ASSORTIMENTI SETS

Esigenze Limitate utilizzo non intensivo Non intensive use

Acciaio alto legati Acciaio inox

Dentatura ricavata interamente di rettifica, taglio laterale rompitruciolo, molla di espulsione del dischetto. Grande rendimento, precisione di foratura nel taglio anche profondo di tutte le lamiere in acciaio, leghe leggere, materiali metallici in genere, utensile riaffilabile. Fully ground cutting teeth with chipbreaker, regrindable. High performances and precision in hole-making into metal sheets, light alloys, all kind of metals.

185

SEGHE A TAZZA CON DENTI IN METALLO DURO - USO INTENSIVO Carbide tipped professional multi-purpose hole saws

21100

Uso intensi o - multimateriale

TCT

Intensive use - multiporpuse

Confezione Packaging

Inserti in metallo duro Carbide tips

Ø mm

Ø pollici / inch

d filetto / thread

19 22 25 29 32 35 38 44 51 57 64 68 76 89 108

3/4 7/8 1” 1-1/8 1-1/4 1-3/8 1-1/2 1-3/4 2” 2-1/4 2-1/2 2-23/32 3” 3-1/2 4-1/4

UNF 1/2 x 20

UNF 5/8 x 18

€

cod.

cad/each

18,346 20,792 20,792 21,638 23,417 23,417 25,092 26,342 28,431 34,283 35,957 37,632 39,307 47,040 61,152

2110001900 2110002200 2110002500 2110002900 2110003200 2110003500 2110003800 2110004400 2110005100 2110005700 2110006400 2110006800 2110007600 2110008900 2110010800

L= 48÷64 mm

Per frese Fit hole cutters

d mm

cod.

19 ÷ 29

HEX 8,5

210707519

16,636

32 ÷ 108

HEX 8,5

210707546

29,609

6,35x90

21070202

5,254

Art. 21109301

Spessore lavorabile Material tickness workable

€ 239,903 S max 20

S max 4

Acciaio / Steel

€ cad/each

Legno / Wood

6 pcs Ø 19 - 22 - 29 38 - 44 - 57 5519 - 5546

2pcs Ø 7 x 100 R ≤ 1200 N/mm2

Applicazioni Applications

Inox Stainless

Acciaio Steel

Metalli Metals

Plastica Plastic

Mattoni Bricks

Ceramica Ceramics

INOX

Legno Wood

Art. 21101 Self Disponibile su richiesta On demand

Taglio professionale nel legno, plastica, fibre di vetro, ceramica, piastrelle, materiali edili leggeri, acciaio inox, fragranite. Max profondità di foratura: 40 mm. Multi purpose hole saws for wood, plastics, tiles, light construction materials, stainless steel, fragranite. Maximum cutting depth: 40 mm.

186

SEGHE A TAZZA CON DENTI IN METALLO DURO PER LEGNO, TRUCIOLATI, AGGLOMERATI, ETC. Carbide tipped hole saws for wood

05078

Alto rendimento - multimateriale

TCT

High performance - multiporpuse

Confezione Packaging

Inserti in metallo duro Carbide tips

h= 70 mm

d Spessore lavorabile Material tickness workable

Ø pollici / inch

d filetto / thread

19 22 25 29 32 35 38 41 44 48 51 54 57 60 64 67 68 70 73 76 79 83 89 95 102 114 127 140 152

3/4” 7/8” 1” 1.1/8” 1.1/4” 1.3/8” 1.1/2” 1.5/8” 1.3/4” 1.7/8” 2” 2.1/8” 2.1/4” 2.3/8” 2.1/2” 2.5/8” 2.23/32” 2.3/4” 2.7/8” 3” 3.1/8” 3.1/4” 3.1/2” 3.3/4” 4” 4.1/2” 5” 5.1/2” 6”

UNF 1/2 x 20

UNF 5/8 x 18

€

pcs.

cod.

cad/each

1 1 1 1 2 2 2 2 2 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 5 5 5 5 5

0507801900 0507802200 0507802500 0507802900 0507803200 0507803500 0507803800 0507804100 0507804400 0507804800 0507805100 0507805400 0507805700 0507806000 0507806400 0507806700 0507806800 0507807000 0507807300 0507807600 0507807900 0507808300 0507808900 0507809500 0507810200 0507811400 0507812700 0507814000 0507815200

11,969 12,469 13,165 13,965 15,152 16,578 17,924 19,350 20,786 22,721 24,068 24,077 25,435 25,214 26,855 28,123 30,136 30,136 31,412 32,760 34,037 35,748 38,301 40,917 48,319 54,012 60,209 66,352 72,027

Legno / Wood

S max 50

S max 2

Lamiere / Iron

Ø mm

Per frese Fit hole saws

R ≤ 1200 N/mm2

d mm

cod.

cad/each

Ø 19 ÷ 29

HEX 8,5

210705580

13,338

Ø 32 ÷ 152

HEX 8,5

210705581

23,339

6,35 x 100

21070204

5,254

Applicazioni Applications

Acciaio Steel

Mattoni Bricks

Plastica Plastic

Sandwich

Legno Wood

Multistrato Multilayer

Art. 05079504

Art. 05079300

Art. 05079301

32 pcs Ø 19 - 22 - 25 - 29 - 32 35 - 38 - 41 - 44 - 48 51 - 57 - 60 - 70 - 83 102 (2x)

9 pcs Ø 19 - 22 - 29 - 35 38 - 44 - 51 - 57 -64

6 pcs Ø 19 - 22 - 29 38 - 44 - 57

5580 - 5581

€ 1.078,814

Truciolato Chipboard

4 pcs 5580 14÷29 Art. 05081 Self Disponibile su richiesta On demand

€

€ 243,688

€ 164,998

6 pcs 5581 32÷152

5 pcs 21070204

400 x 650 x 320mm Per forare con grande rendimento legno duro e dolce, stratificati, truciolati, agglomerati, laminati, materiali sandwich. Taglia anche plastica dura, mattoni forati e porosi, lamiera sottile dolce. max profondità di foratura 50 mm. High performance on drilling into tough and soft wood, plywood, chipboards, agglomerates, laminated, porous bricks and thin metal sheet. Maximum cutting depth 50mm.

187

FRESE A TAZZA CON DENTI RIVESTITI IN CARBURO DI TUNGSTENO IN GRANI PER MATERIALI EDILI DURI, PIASTRELLE, GRANITO, ETC. Carbide grit hole saws, high quality

21105

Per materiali edili duri

For hard building materials Confezione Packaging

Inserti in carburo di tungsteno Carbide grit

L= 40÷48 mm

Ø mm

Ø pollici / inch

d filetto / thread

16 19 20 22 25 29 32 35 38 44 48 51 54 57 60 64 70 76 83 86 95 102 114

5/8 3/4 7/8 1” 1-1/8 1-1/4 1-3/8 1-1/2 1-3/4 1-7/8 2” 2-1/8 2-1/4 2-3/8 2-1/2 2-3/4 3” 3-1/4 3-3/8 3-3/4 4” 4-1/2

UNF 1/2 x 20

UNF 5/8 x 18

€

pcs.

cod.

cad/each

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

2110501600 2110501900 2110502000 2110502200 2110502500 2110502900 2110503200 2110503500 2110503800 2110504400 2110504800 2110505100 2110505400 2110505700 2110506000 2110506400 2110507000 2110507600 2110508300 2110508600 2110509500 2110510200 2110511400

17,873 17,873 18,292 18,292 18,292 19,024 20,140 20,800 22,263 24,373 24,373 24,373 24,373 24,735 25,863 25,863 30,876 31,942 32,988 34,007 34,380 34,380 40,687

Utilizzo a rotazione Rotary use only Spessore lavorabile Material tickness workable

S max 5

Per frese Fit hole cutters

R ≤ 1200 N/mm2

€

cod.

cad/each

Ø 16 ÷ 29

210706519

13,338

Ø 32 ÷ 114

210706546

23,339

Applicazioni Applications

Piastrelle Mattoni durissimi Tiles Hard burnt brick Ceramica Ceramics

Punta pilota Pilot drill

Ø Ø 7x80

cad/each

13,116

21020112

6,3 mm

Pietre naturali Marmo Stones Marble Fibra di vetro Laminati plastici Fiberglass

Art. 21135 Self Disponibile su richiesta On demand

Per tagliare: Ceramica, gres, granito, marmo, ardesia, fibre di vetro, ghisa, laminati e tutti i materiali abrasivi. Cuts: Ceramic tile, laminates, composition board, marble, fiberglass, cast iron, and other abrasive materials.

188

€

cod.

Art. 03121002

€ 59,211

ASSORTIMENTI FRESE A TAZZA CON DENTI RIVESTITI IN CARBURO DI TUNGSTENO IN GRANI Carbide tipped professional multi-purpose hole saws

HSS-G DIN 338 Art. 21107301

€ 104,976

6 pcs Art. 21105 Ø 16 - 20 - 22 - 25 - 32 - 35 mm (1x) 1 pcs Art. 210706519 Ø 16÷29 N. 1 pc 1 pcs Art. 210706546 Ø 32÷114 N. 1 pc

FRESA A TAZZA MULTIPLA PER EDILIZIA IN CARBURO DI TUNGSTENO IN GRANI Multiple sizes carbide grit hole saw

21108 Confezione Packaging

Ø mm

pcs.

cod.

cad/each

€

33-43-53-67-83

21108100

53,309

h = 60mm

Art. 21107600

€ 74,808

10 pcs Art. 21105 Ø 33 - 53 - 67 - 73 - 83 mm (1x) Qualità standard Standard quality

Applicazioni Applications

Mattoni brick

Art. 23010060

€ 7,511

Art. 23005050

€ 7,015

189

SEGHE A TAZZA BIMETALLICHE AL COBALTO 8 A DENTATURA VARIABILE

AISI M42

HSS-CO 8% AISI M42 bimetal hole saws with variable teeth

21090

HSS-CO 8%

d filetto thread

9/16

UNF 1/2 x 20

16 17 19 20 21 22 24 25 27 29 30

5/8 11/16 3/4 13/16 7/8 15/16 1” 1.1/16 1.1/8 1.3/16

1.1/4

33 35 37 38 40 41 43 44 45 46 48 50 51 52 54 57 59 60 64 65 67

1.5/16 1.3/8 1.7/16 1.1/2 1.9/16 1.5/8 1.11/16 1.3/4 1.13/16 1.7/8 2” 2.1/16 2.1/8 2.1/4 2.5/16 2.3/8 2.1/2 2.9/16 2.5/8

Packaging

BIM. HSS-CO 8% AISI M42

14÷17 19÷37 38÷210 220÷305

67±1 61±1 54±1 44±1

Variabile: nuovo disegno dei denti più performanti Z 4-6 Variable: new upgrade teeth design Z 4-6

Heavy works - for stainless steel

Ø pollici inch

Confezione

Lavori gravosi - per acciaio inox

AISI M42

UNF 5/8 x 18

€ cod.

cad/each

2109001400

10,340

2109001600 2109001700 2109001900 2109002000 2109002100 2109002200 2109002400 2109002500 2109002700 2109002900 2109003000

10,340 10,340 11,087 11,087 11,819 11,819 12,517 12,517 13,616 13,616 14,443

2109003200

14,443

2109003300 2109003500 2109003700 2109003800 2109004000 2109004100 2109004300 2109004400 2109004500 2109004600 2109004800 2109005000 2109005100 2109005200 2109005400 2109005700 2109005900 2109006000 2109006400 2109006500 2109006700

14,938 16,528 16,935 16,935 17,372 17,748 17,748 19,281 19,281 19,281 19,704 20,403 20,403 22,605 22,605 23,385 23,908 23,908 25,784 25,784 28,571

Ø pollici inch

68 70 73 75 76 79 83 86 89 92 95 98 100 102 105 108 111 114 121 127 133 140 146 152 160 168 177 200 210 220 233 250 260 265 280 305

2.3/4 2.7/8 3” 3.1/8 3.1/4 3.3/8 3.1/2 3.5/8 3.3/4 3.7/8 4” 4.1/8 4.1/4 4.3/8 4.1/2 4.3/4 5” 5.1/4 5.1/2 5.3/4 6” 6.5/16 6.5/8 6.31/32 7.7/8 8.5/16 8”.3/4 9”. 1/8 9”.7/8 10”.1/4 10”.1/2 11” 12”

d filetto thread

€ cod.

cad/each

2109006800 2109007000 2109007300 2109007500 2109007600 2109007900 2109008300 2109008600 2109008900 2109009200 2109009500 2109009800 2109010000 2109010200 2109010500 2109010800 2109011100 2109011400 2109012100 2109012700 2109013300 2109014000 2109014600 2109015200 2109016000 2109016800 2109017700 2109020000 2109021000 2109022000 2109023300 2109025000 2109026000 2109026500 2109028000 2109030500

28,571 28,571 29,988 31,162 31,162 31,992 33,330 33,931 37,061 38,805 38,805 39,768 39,767 39,767 42,749 46,270 47,720 52,659 54,532 58,559 63,034 64,230 72,039 69,178 74,629 78,669 83,526 90,256 91,495 94,743 124,503 131,859 153,615 168,903 210,981 477,750

S max 3

Acciaio / Steel

S max 20

Spessore lavorabile Material tickness workable Legno / Wood

Fase in M42 M42 zone Area di saldatura elettronica Electronic band area

R ≤ 1000 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Plastica Plastic

Legno Wood

Sandwich Sandwich

Truciolato Chipboard

190

Microdurezza verificata direttamente sul tagliente Micro-hardness tested directly on the cutting tooth

Banda di supporto Support band

Seghe a tazza di altissima qualità, con taglienti in acciaio al Cobalto 8% per i lavori più gravosi; taglio professionale e profondo nell’acciaio inox, acciai duri, ghisa, alluminio, bronzo, ottone, legno duro e derivati, resine sintetiche, laminati plastici, gomma dura, cartongesso, etc. High quality hole saws with HSS-CO 8% cutting edges for the toughest jobs; deep and professional cut in stainless steel, hard steel, cast iron, aluminium, bronze, brass, wood and its by-products, synthetic resins, laminated plastic, hard rubber, etc.

ALBERI PER SEGHE A TAZZA BIMETAL HSS-CO 8 Arbors for HSS-CO 8% bimetal hole saws

ALBERI PER SEGHE BIMETAL Fit hole saws Ø 14÷30 mm Art. 210705514B

Art. 210705515B Q.C.

Art. 210705519B

Art. 210705518B

14 30 mm

Art. 210705519 SDSB

Per seghe Fit hole saws

d mm

cod.

cad/each

€

Ø 14 ÷ 30 Ø 14 ÷ 30 Ø 14 ÷ 30 Ø 14 ÷ 30 Ø 14 ÷ 30

Ø 6,35 HEX 6,35 Q.C. HEX 8,5 HEX 11 SDS PLUS

210705514B 210705515B 210705519B 210705518B 210705519SDSB

10,014 11,911 11,911 13,338 17,342 14÷30

SDS - PLUS

1/2 x 20

ALBERI PER SEGHE BIMETAL Fit hole saws Ø 32÷305 mm Art. 210705520B

Art. 210705546 SDS

Art. 210705521B Q.C.

Art. 210705549 SDB

Art. 210705546B

Art. 210705545B

Art. 210705547B

32 305 mm

Art. 210705548B Q.C.

Per seghe Fit hole saws

d mm

cod.

cad/each

€

Ø 32 ÷ 305 Ø 32 ÷ 305 Ø 32 ÷ 305 Ø 32 ÷ 305 Ø 32 ÷ 305 Ø 32 ÷ 305 Ø 32 ÷ 305 Ø 32 ÷ 305 Ø 32 ÷ 305

HEX 11 HEX 6,35 Q.C. HEX 8,5 HEX 11 HEX 8,5 Q.C. SDS PLUS SDS PLUS HEX 11 HEX 16

210705520B 210705521B 210705546B 210705547B 210705548B 210705546SDSB 210705549SDSB 210705545B 210705573B

13,821 13,821 20,841 23,339 18,671 30,339 24,271 27,133 22,560

Art. 210705573B

32÷305

5/8 x 18

SDS - PLUS

Art. 21070203

Art. 21070204

Art. 21070202

Art. 21070300

Art. 21070302

Punta pilota Pilot drill

Per alberi Fit arbors

Ø 6,35 x 115 Ø 6,35 x 90

€

cod.

cad/each

5514B - 5520B 5545B - 5573B - 5518B

21070203

5,254

5515B - 5519B - 5519SDSB 5521B - 5546B - 5546SDSB 5547B - 5548B - 5549SDSB

21070202

5,254

Adattatore - montato su alberi 5514B - 5519B permette di portare frese da Ø 32 a Ø 305 Arbor adapter - Allows 5514B - 5519B to be used with 1.1/4” through 6” hole saws

21070300

5,164

Prolunga - HEX 11 L = 300 mm 12” extension - to be used with arbors 5518B - 5520B - 5547B - 5545B

21070302

24,174

191

ALBERI PER SEGHE A TAZZA ARBORS FOR HOLE SAWS

SDS - PLUS

ASSORTIMENTI SEGHE A TAZZA BIMETALLICHE HSS-CO 8 HSS-CO 8% Bi-metal hole saws kits

KIT PER ELETTRICISTI Electrician’s kit

Art. 21013201K

Art. 21013202K

Art. 21013209K

Art. 21013207K

€ 131,294

€ 113,880

€ 187,554

€ 247,851

6 pcs Ø 22÷64

6 pcs Ø 16÷51 (METRIC)

7 pcs Ø 22÷68

13 pcs Ø 16÷60 (PG 9÷48)

Composizione

Description

Ø 22 - 29 - 35 44 - 51 - 64

Ø 16 - 20 - 25 32 - 40 - 51

5519B - 5546B

Description

Ø 16 - 19 - 20 21 - 22 - 25 29 - 32 - 38 48 - 51 - 54 60

Ø 22 - 29 - 35 38 - 44 - 51 68 5519B - 5546B 1

5519B - 5546B 1

KIT PER IDRAULICI Plumber’s kit

Art. 21013204K

€ 120,568 6 pcs Ø 19÷57

KIT INDUSTRIALE Industrial kit

Art. 21013206K

€ 462,194 15 pcs Ø 19÷114

Composizione Description

Ø 19 - 22 - 29 38 - 44 - 57

Ø 19 - 22 - 29 35 - 38 - 44 51 - 57 - 64 76 - 83 - 92 95 - 105 - 114

5519B - 5546B 1

KIT PER INSTALLATORI Journeyman’s kit

Art. 21013215K

Art. 21013216K

11 pcs Ø 19÷76

12 pcs Ø 16÷76

Composizione

€ 255,158 Art. 21013205K

€ 186,216

Description

9 pcs Ø 19÷64

€ 257,635

Description

Ø 16 - 19 - 22 25 - 29 - 32 35 - 38 - 44 51 - 64 - 76

Ø 19 - 22 - 25 - 29 35 - 38 - 44 - 51 57 - 64 - 76

Composizione Description

5519B - 5546B

Ø 19 - 22 - 29 35 - 38 - 44 51 - 57 - 64

5519B - 5546B

5519B - 5546B 1

ASSORTIMENTI SETS

Art. 21013211K

Art. 21013212K

11 pcs Ø 20÷64

11 pcs Ø 19÷83

Composizione

€ 243,825

Description

Ø 20 - 22 - 25 - 30 32 - 35 - 40 - 44 51 - 60 - 64 5519B - 5546B 1

192

€ 274,643

Description

Ø 19 - 22 - 25 30 - 35 - 40 51 - 60 - 64 76 - 83 5519B - 5546B 1

ESPOSITORI SEGHE A TAZZA BIMETALLICHE HSS-CO 8 HSS-CO 8% Bimetal hole saws display

21013504K

ESPOSITORE Display

Art. 21013504K

€ 991,376 49 pcs Ø 16÷102

Composizione

Description

Ø 16 - 19 - 20 - 22 2x 25 - 30 - 32 - 35 38 - 40 - 48 - 51 57 - 60 - 70 - 83 102 5519B 5546B

14÷30 4x 32÷152 6x

21070202

23x18x50 cm

ESPOSITORE Display

Art. 21013503K

€ 502,389 24 pcs Ø 16÷83

Composizione Description

Ø 16 - 19 - 20 - 22 1x 25 - 27 - 29 - 30 32 - 35 - 38 - 40 44 - 51 - 54 - 60 64 - 70 - 76 - 83 5519B 5546B

14÷30 2x 32÷152 2x

ASSORTIMENTI SETS

21013503K

193

ALBERO A CAMBIO RAPIDO PER SEGHE A TAZZA

BIMASTER

Quick change arbor for bimetal hole saws

DENTE RINFORZATO REINFORCED TOOTH

% FASTER

FORI PERFETTI PERFECT HOLES

SISTEMA DI AGGANCIO ULTRA RAPIDO

ULTRA-FAST LOCKING SYSTEM

Adattatori universali 1/2” X 20 UNF 5/8” X 18 UNF Montabili sulle seghe di tutte le marche da 14 a 305 mm Universal adaptors 1/2” X 20 UNF 5/8” X 18 UNF Installable on all brands hole saws from 14 to 305 mm

Due punte Pilota HSS-G

L 95 mm L 105 mm Incluse nella confezione Two pilot twist drills HSS-G

L 95 mm L 105 mm Included into the pack

Gambo con 3 pianetti antislittamento per la massima tenuta nel mandrino 3 flat anti slip flats for max grip into the chuck 194

SEGHE A TAZZA BIMETALLICHE HSS AD ALTE PRESTAZIONI CON DENTE RINFORZATO, PER SISTEMA K-LOCK HSS bimetal high performance hole saws, reinforced tooth, for K-Lock system

21058

Alte presta ioni - dente rinfor ato - sistema -LOC

HSS M3

High performance - reinforced tooth - K-LOCK system

Ø pollici inch

d filetto thread

5/8

UNF 1/2 X 20

17 19 20 21 22 24 25 27 29 30

1/16 3/4

1.1/4

33 35 38 40 41 43 44 46

1.5/16 1.3/8 1.1/2 1.9/16 1.5/8 1.11/16 1.3/4 1.13/16

Confezione Packaging

BIM. HSS M3/1 Dente rinforzato

Ø h

14÷17 18÷37 38÷133

h 56±1 51±1 44±1

13/16 7/8 15/16 1" 1.1/16 1.1/8 1.3/16 UNF 5/8 X 18

€

cod.

cad/each

2105801600

9,263

2105801700 2105801900 2105802000 2105802100 2105802200 2105802400 2105802500 2105802700 2105802900 2105803000

9,263 9,928 9,928 10,583 10,583 11,210 11,210 12,198 12,198 12,930

2105803200

12,930

2105803300 2105803500 2105803800 2105804000 2105804100 2105804300 2105804400 2105804600

13,376 14,801 14,801 15,181 15,514 15,514 16,853 16,853

Ø 48 51 54 57 60 64 65 67 68 70 73 76 79 83 89 92 98 102 111 121 127 133

Ø pollici inch

d filetto thread

1.7/8 2" 2.1/8 2.1/4 2.3/8 2.1/2 2.9/16 2.5/8 2.2/4 2.7/8 3" 3.1/8 3.1/4 3.1/2 3.5/8 3.7/8 4" 4.3/8 4.3/4 5" 5.1/4

€

cod.

cad/each

2105804800 2105805100 2105805400 2105805700 2105806000 2105806400 2105806500 2105806700 2105806800 2105807000 2105807300 2105807600 2105807900 2105808300 2105808900 2105809200 2105809800 2105810200 2105811100 2105812100 2105812700 2105813300

17,224 17,832 19,760 20,435 20,891 22,534 22,534 24,976 24,976 24,976 26,211 27,959 27,959 29,127 32,395 33,915 34,761 34,761 41,705 47,662 51,177 53,001

d Spessore lavorabile Material tickness workable

S max 4

Acciaio / Steel

Applicazioni Applications

Acciaio Steel

Metalli Metals

Plastica Plastic

Legno Wood

Sandwich Sandwich

K-LOCK KIT ALBERO A CAMBIO RAPIDO PER SEGHE A TAZZA BIMETALLICHE

Legno / Wood

S max 20

R ≤ 850 N/mm2

Truciolato Chipboard

ADATTATORI PER ALBERO K-LOCK ADAPTERS FOR K-LOCK ARBOR

K-LOCK, UICK CHANGE ARBOR KIT FOR BIMETAL HOLE SAWS

Art. 210704050

€ 35,000

Composizione kit: Description:

1 x albero K-Lock 1 x K-Lock arbor

1 x punta pilota L 95 mm 1 x pilot drill L 95 mm

1x punta pilota L 100 mm 1x pilot drill L 100 mm

1x adattatore 1/2” X 20 UNF 1x adaptor 1/2” X 20 UNF

1x adattatore 5/8” X 18 UNF 1x adaptor 5/8” X 18 UNF

Art. 210704051

18,500

Adattatori: Adapters:

2x 1/2” x 20 UNF 3x 5/8” x 18 UNF

UNIVERSALE - Si monta sulle seghe a tazza di tutte le marche. Per seghe da 14 a 305 mm UNIVERSAL - It fits on hole saws of all brands. For hole saws from 14 to 305 mm 195

SEGHE A TAZZA BIMETALLICHE HSS A DENTATURA VARIABILE HSS bimetal hole saws

21060

HSS M3

Ø pollici inch

d filetto thread

9/16

UNF 1/2 x 20

16 17 19 20 21 22 24 25 27 29 30

5/8 11/16 3/4 13/16 7/8 15/16 1” 1.1/16 1.1/8 1.3/16

1.1/4

33 35 37 38 40 41 43 44 45 46 48 50 51 52 54 55 56 57 59 60 62 64

1.5/16 1.3/8 1.7/16 1.1/2 1.9/16 1.5/8 1.11/16 1.3/4 1.13/16 1.7/8 2” 2.1/16 2.1/8 2.1/4 2.5/16 2.3/8 2.1/2

Confezione Packaging

BIM. - HSS M3/1

Ø h

14÷17 19÷37 38÷305

57±1 51±1 44±1

Variabile Z 4-6 Variable Z 4-6

S max 3

Acciaio / Steel

S max 20

Spessore lavorabile Material tickness workable

UNF 5/8 x 18

€ cod.

cad/each

2106001400

8,475

2106001600 2106001700 2106001900 2106002000 2106002100 2106002200 2106002400 2106002500 2106002700 2106002900 2106003000

8,475 8,475 9,088 9,088 9,688 9,688 10,260 10,260 11,161 11,161 11,838

2106003200

11,838

2106003300 2106003500 2106003700 2106003800 2106004000 2106004100 2106004300 2106004400 2106004500 2106004600 2106004800 2106005000 2106005100 2106005200 2106005400 2106005500 2106005600 2106005700 2106005900 2106006000 2106006200 2106006400

12,244 13,548 13,548 13,548 13,898 14,199 14,199 15,425 15,425 15,425 15,763 16,323 16,323 18,084 18,084 18,084 18,708 18,708 19,126 19,126 20,627 20,627

Ø pollici inch

65 2.9/16 67 2.5/8 68 70 2.3/4 73 2.7/8 75 76 3” 79 3.1/8 83 3.1/4 86 3.3/8 89 3.1/2 92 3.5/8 95 3.3/4 98 3.7/8 100 102 4” 105 4.1/8 108 4.1/4 111 4.3/8 114 4.1/2 121 4.3/4 127 5” 133 5.1/4 140 5.1/2 146 5.3/4” 152 6” 160 6.5/16 168 6.5/8 177 6.31/32 200 7.7/8 210 8.5/16 220 8.3/4 233 9.1/8 250 9.7/8 260 10.1/4 265 10.1/2 280 11” 305 12”

d filetto thread

€ cod.

cad/each

2106006500 2106006700 2106006800 2106007000 2106007300 2106007500 2106007600 2106007900 2106008300 2106008600 2106008900 2106009200 2106009500 2106009800 2106010000 2106010200 2106010500 2106010800 2106011100 2106011400 2106012100 2106012700 2106013300 2106014000 2106014600 2106015200 2106016000 2106016800 2106017700 2106020000 2106021000 2106022000 2106023300 2106025000 2106026000 2106026500 2106028000 2106030500

20,627 22,857 22,857 22,857 23,990 24,929 24,929 25,594 26,664 27,145 29,649 31,044 31,044 31,814 31,814 31,814 34,199 37,016 38,176 42,127 43,625 46,847 48,515 51,384 53,978 59,088 59,703 62,935 66,821 72,205 73,196 75,794 99,602 105,487 122,892 135,122 168,785 382,200

Legno / Wood

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Plastica Plastic

Legno Wood

Sandwich Sandwich

Truciolato Chipboard

Seghe bimetalliche HSS a dentatura variabile e spoglia positiva per il taglio altamente professionale di qualsiasi materiale a spessore sottile quale acciaio, ghisa, alluminio, rame, bronzo, ottone, legno, plastica, fibra di vetro, resine sintetiche, formica, cartongesso. rande rendimento e durata, taglio pulito. Art. 21068 Self Disponibile su richiesta On demand

196

Variable tooth bimetal hole saws for faster and smoother cuts in: iron, steel, aluminium, brass, copper, cast iron, stainless steel, wood and plywood, plastics, fibreglass etc

ALBERI PER SEGHE A TAZZA BIMETAL (INTERCAMBIABILI CON UALSIASI ALTRA MARCA) Arbors for bimetal hole saws

ALBERI PER SEGHE BIMETAL Fit hole saws Ø 14÷30 mm Art. 210705514

Art. 210705515 Q.C.

Art. 210705519

Art. 210705518

14 30 mm

Art. 210705519 SDS

Per seghe Fit hole saws

d mm

cod.

cad/each

€

Ø 14 ÷ 30 Ø 14 ÷ 30 Ø 14 ÷ 30 Ø 14 ÷ 30 Ø 14 ÷ 30

Ø 6,35 HEX 6,35 Q.C. HEX 8,5 HEX 11 SDS PLUS

210705514 210705515 210705519 210705518 210705519SDS

10,014 10,712 10,712 13,338 17,342

14÷30

SDS - PLUS

ALBERI PER SEGHE BIMETAL Fit hole saws Ø 32÷305 mm Art. 210705520

Art. 210705546 SDS

Art. 210705521 Q.C.

Art. 210705549 SDS

Art. 210705546

Art. 210705547

32 305 mm

Art. 210705548 Q.C.

1/2 x 20

Per seghe Fit hole saws

d mm

cod.

cad/each

€

Ø 32 ÷ 305 Ø 32 ÷ 305 Ø 32 ÷ 305 Ø 32 ÷ 305 Ø 32 ÷ 305 Ø 32 ÷ 305 Ø 32 ÷ 305 Ø 32 ÷ 305 Ø 32 ÷ 305

HEX 11 HEX 6,35 Q.C. HEX 8,5 HEX 11 HEX 8,5 Q.C. SDS PLUS SDS PLUS HEX 11 HEX 16

210705520 210705521 210705546 210705547 210705548 210705546SDS 210705549SDS 210705545 210705573

13,821 13,821 18,862 23,339 18,671 30,339 24,271 24,408 21,435 32÷305

Art. 210705545

5/8 x 18

SDS - PLUS

Art. 21070200

Art. 21070202

Art. 21070201

Art. 21070300

Art. 21070302

Punta pilota Pilot drill

Per alberi Fit arbors

Ø 6,35 x 105

€

cod.

cad/each

5514 - 5520 5545 - 5573 - 5518

21070200

5,254

Ø 6,35 x 90

5519B 5519SDSB

21070202

5,254

Ø 6,35 x 80

5515 - 5519 - 5519SDS 5521 - 5546 - 5546SDS 5547 - 5548 - 5549SDS

21070201

5,254

Adattatore - montato su alberi 5514 - 5519 permette di portare frese da Ø 32 a Ø 210 Arbor adapter - Allows 5514 - 5519 to be used with 1.1/4” through 6” hole saws

21070300

5,164

Prolunga - HEX 11 L = 300 mm 12” extension - to be used with arbors 5518 - 5520 - 5547 - 5545

21070302

24,174

197

ALBERI PER SEGHE A TAZZA ARBORS FOR HOLE SAWS

SDS - PLUS

ASSORTIMENTI SEGHE A TAZZA BIMETALLICHE HSS IN VALIGETTE DI PLASTICA HSS Bi-metal hole saws kits in plastic cases

KIT PER ELETTRICISTI Electrician’s kit

Art. 21080201K

Art. 21080202K

Art. 21080207K

6 pcs Ø 22÷64

6 pcs Ø 16÷51 (METRIC)

13 pcs Ø 16÷60 (PG 9÷48)

Composizione

€ 115,637

Description

€ 98,712

Description

Ø 22 - 29 - 35 44 - 51 - 64

Ø 16 - 20 - 25 32 - 40 - 51

5519 - 5546

€ 186,146

Description

Ø 16 - 19 - 20 21 - 22 - 25 29 - 32 - 38 48 - 51 - 54 60 5519 - 5546 1

KIT PER IDRAULICI Plumber’s kit

Art. 21080204K

€ 104,358 6 pcs Ø 19÷57

KIT INDUSTRIALE Industrial kit

Art. 21080206K

€ 369,477 15 pcs Ø 19÷114

Composizione Description

Ø 19 - 22 - 29 38 - 44 - 57

Ø 19 - 22 - 29 35 - 38 - 44 51 - 57 - 64 76 - 83 - 92 95 - 105 - 114

5519 - 5546 1

KIT PER INSTALLATORI Journeyman’s kit

Art. 21080205K

Art. 21080211K

Art. 21080212K

9 pcs Ø 19÷64

11 pcs Ø 20÷64

11 pcs Ø 19÷83

Composizione

€ 162,168

Composizione Description

Ø 19 - 22 - 29 35 - 38 - 44 51 - 57 - 64 5519 - 5546 1

ASSORTIMENTI SETS

198

€ 179,095

Description

Ø 20 - 22 - 25 - 30 32 - 35 - 40 - 44 51 - 60 - 64 5519 - 5546 1

€ 239,734

Description

Ø 19 - 22 - 25 30 - 35 - 40 51 - 60 - 64 76 - 83 5519 - 5546 1

ESPOSITORI SEGHE A TAZZA BIMETALLICHE HSS Bimetal hole saws display

21080504K

ESPOSITORE Display

Art. 21080504K

€ 726,037 49 pcs Ø 16÷102

Composizione

Description

Ø 16 - 19 - 20 - 22 2x 25 - 30 - 32 - 35 38 - 40 - 48 - 51 57 - 60 - 70 - 83 102 5519 5546

14÷30 32÷210

21070201

4x 6x 5x

23x18x50 cm

ESPOSITORE Display

Art. 21080503K

€ 363,859 24 pcs Ø 16÷83

Composizione Description

Ø 16 - 19 - 20 - 22 1x 25 - 27 - 29 - 30 32 - 35 - 38 - 40 44 - 51 - 54 - 60 64 - 70 - 76 - 83 5519 5546

14÷30 32÷210

2x 2x

ASSORTIMENTI SETS

21080503K

199

SEGHE A TAZZA BIMETALLICHE HSS A DENTATURA VARIABILE AD ALBERO FISSO One piece HSS bimetal hole saws with fixed arbor

21061

Albero fisso

HSS M3

Fixed arbor

Confezione Packaging

1/2” - 12,7 mm HEX

BIM. - HSS M3/1

40 mm

h=45÷48 mm

Variabile Z 4-6 Variable Z 4-6

Ø pollici / inch

cod.

cad/each

16 19 21 22 24 25 27 29 30 32 33 35 38 40 41 44 48 51 54 57 60 64 67 70 76 79 83 89 92 95 102

5/8 3/4 13/16 7/8 15/16 1” 1.1/16 1.1/8 1.3/16 1.1/4 1.5/16 1.3/8 1.1/2 1.9/16 1.5/8 1.3/4 1.7/8 2” 2.1/8 2.1/4 2.3/8 2.1/2 2.5/8 2.3/4 3” 3.1/8 3.1/4 3.1/2 3.5/8 3.3/4 4”

2106101600 2106101900 2106102100 2106102200 2106102400 2106102500 2106102700 2106102900 2106103000 2106103200 2106103300 2106103500 2106103800 2106104000 2106104100 2106104400 2106104800 2106105100 2106105400 2106105700 2106106000 2106106400 2106106700 2106107000 2106107600 2106107900 2106108300 2106108900 2106109200 2106109500 2106110200

13,143 14,140 14,844 15,267 15,690 16,252 16,686 17,966 18,388 18,952 19,234 19,655 20,499 20,793 21,076 21,778 22,905 23,762 24,761 25,182 26,450 27,588 29,137 30,275 32,258 33,102 34,383 37,070 37,774 38,912 40,895

Punta pilota Pilot drill

cod.

cad/each

21070201

5,254

Ø 6,35 x 80

€

S max 3

Acciaio / Steel

S max 20

Spessore lavorabile Material tickness workable Legno / Wood

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Plastica Plastic

Legno Wood

Multistrato Multilayer

Sandwich Sandwich

Truciolato Chipboard

Seghe bimetalliche HSS a dentatura variabile e spoglia positiva per il taglio altamente professionale di qualsiasi materiale a spessore sottile quale acciaio, ghisa, alluminio, rame, bronzo, ottone, legno, plastica, fibra di vetro, resine sintetiche, formica, cartongesso. Grande rendimento e durata, taglio pulito. Variable tooth bimetal hole saws for faster and smoother cuts in: iron, steel, aluminium, brass, copper, cast iron, stainless steel, wood and plywood, plastics, fibreglass etc

200

SEGHE A TAZZA BIMETALLICHE HSS A DENTATURA VARIABILE HSS bimetal hole saws

21067

HSS M3 Confezione Packaging

BIM. - HSS M3/1 Finitura nera lack finish

Ø h

14÷17 19÷37 38÷210

57±1 51±1 44±1

Variabile Z 4-6

Ø d inch filetto / thread

9/16

16 17 19 20 21 22 24 25 27 29 30

5/8 11/16 3/4 13/16 7/8 15/16 1” 1.1/16 1.1/8 1.3/16

1.1/4

33 35 37 38 40 41 43 44 45 46 48 50 51 52 54 55 56 57 59

1.5/16 1.3/8 1.7/16 1.1/2 1.9/16 1.5/8 1.11/16 1.3/4 1.13/16 1.7/8 2” 2.1/16 2.1/8 2.1/4 2.5/16

UNF 1/2 x 20

UNF 5/8 x 18

€

cod.

cad/each

2106701400

6,780

2106701600 2106701700 2106701900 2106702000 2106702100 2106702200 2106702400 2106702500 2106702700 2106702900 2106703000

6,780 6,780 7,270 7,270 7,750 7,750 8,208 8,208 8,929 8,929 9,471

2106703200

9,471

2106703300 2106703500 2106703700 2106703800 2106704000 2106704100 2106704300 2106704400 2106704500 2106704600 2106704800 2106705000 2106705100 2106705200 2106705400 2106705500 2106705600 2106705700 2106705900

9,795 10,838 10,838 10,838 11,118 11,359 11,359 12,340 12,340 12,340 12,610 13,058 13,058 14,467 14,467 14,467 14,967 14,967 15,301

Ø d inch filetto / thread

60 2.3/8 62 64 2.1/2 65 2.9/16 67 2.5/8 68 70 2.3/4 73 2.7/8 75 76 3” 79 3.1/8 83 3.1/4 86 3.3/8 89 3.1/2 92 3.5/8 95 3.3/4 98 3.7/8 100 102 4” 105 4.1/8 108 4.1/4 111 4.3/8 114 4.1/2 121 4.3/4 127 5” 133 5.1/4 140 5.1/2 146 5.3/4” 152 6” 160 6.5/16 168 6.5/8 177 6.31/32 190 7.1/2 200 7.7/8 210 8.5/16

€

cod.

cad/each

2106706000 2106706200 2106706400 2106706500 2106706700 2106706800 2106707000 2106707300 2106707500 2106707600 2106707900 2106708300 2106708600 2106708900 2106709200 2106709500 2106709800 2106710000 2106710200 2106710500 2106710800 2106711100 2106711400 2106712100 2106712700 2106713300 2106714000 2106714600 2106715200 2106716000 2106716800 2106717700 2106719000 2106720000 2106721000

15,301 16,502 16,502 16,502 18,286 18,286 18,286 19,192 19,943 19,943 20,475 21,331 21,716 23,719 24,835 24,835 25,451 25,451 25,451 27,359 29,613 30,541 33,701 34,900 37,478 38,812 41,108 43,183 47,270 47,762 50,348 53,457 54,783 57,125 58,557

Variable Z 4-6

S max 3

Acciaio / Steel

S max 20

Spessore lavorabile Material tickness workable Legno / Wood

R ≤ 750 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Plastica Plastic

Legno Wood

Sandwich Sandwich

Truciolato Chipboard

Seghe bimetalliche HSS a dentatura variabile e spoglia positiva per il taglio altamente professionale di qualsiasi materiale a spessore sottile quale acciaio, ghisa, alluminio, rame, bronzo, ottone, legno, plastica, fibra di vetro, resine sintetiche, formica, cartongesso. Grande rendimento e durata, taglio pulito. Variable tooth bimetal hole saws for faster and smoother cuts in: iron, steel, aluminium, brass, copper, cast iron, stainless steel, wood and plywood, plastics, fibreglass etc

201

ALBERI PER SEGHE A TAZZA BIMETAL (INTERCAMBIABILI CON UALSIASI ALTRA MARCA) Arbors for bimetal hole saws

ALBERI PER SEGHE BIMETAL

Fit hole saws Ø 14÷30 mm Art. 210705514

Art. 210705515 Q.C.

Art. 210705519

Art. 210705518

14 30 mm

Art. 210705519 SDS

Per seghe Fit hole saws

d mm

cod.

cad/each

€

Ø 14 ÷ 30 Ø 14 ÷ 30 Ø 14 ÷ 30 Ø 14 ÷ 30 Ø 14 ÷ 30

Ø 6,35 HEX 6,35 Q.C. HEX 8,5 HEX 11 SDS PLUS

210705514 210705515 210705519 210705518 210705519SDS

10,014 10,712 10,712 13,338 17,342

14÷30

SDS - PLUS

ALBERI PER SEGHE BIMETAL

Fit hole saws Ø 32÷305 mm Art. 210705520

Art. 210705521 Q.C.

Art. 210705546

Art. 210705547

1/2 x 20

32 305 mm

Art. 210705548 Q.C.

Per seghe Fit hole saws

d mm

cod.

cad/each

€

Ø 32 ÷ 305 Ø 32 ÷ 305 Ø 32 ÷ 305 Ø 32 ÷ 305 Ø 32 ÷ 305 Ø 32 ÷ 305 Ø 32 ÷ 305 Ø 32 ÷ 305 Ø 32 ÷ 305

HEX 11 HEX 6,35 Q.C. HEX 8,5 HEX 11 HEX 8,5 Q.C. SDS PLUS SDS PLUS HEX 11 HEX 16

210705520 210705521 210705546 210705547 210705548 210705546SDS 210705549SDS 210705545 210705573

13,821 13,821 18,862 23,339 18,671 30,339 24,271 24,408 21,435 32÷305

Art. 210705546 SDS

Art. 210705549 SDS

Art. 210705546

Art. 210705545

ALBERI PER SEGHE A TAZZA ARBORS FOR HOLE SAWS

5/8 x 18

SDS - PLUS

Art. 21070200

Art. 21070202

202

Art. 21070201

Art. 21070300

Art. 21070302

Punta pilota Pilot drill

Per alberi Fit arbors

Ø 6,35 x 105

€

cod.

cad/each

5514 - 5520 5545 - 5573 - 5518

21070200

5,254

Ø 6,35 x 90

5519B 5519SDSB

21070202

5,254

Ø 6,35 x 80

5515 - 5519 - 5519SDS 5521 - 5546 - 5546SDS 5547 - 5548 - 5549SDS

21070201

5,254

Adattatore - montato su alberi 5514 - 5519 permette di portare frese da Ø 32 a Ø 210 Arbor adapter - Allows 5514 - 5519 to be used with 1.1/4” through 6” hole saws

21070300

5,164

Prolunga - HEX 11 L = 300 mm 12” extension - to be used with arbors 5518 - 5520 - 5547 - 5545

21070302

24,174

ASSORTIMENTI SEGHE A TAZZA BIMETALLICHE HSS IN VALIGETTE DI PLASTICA HSS Bi-metal hole saws kits in plastic cases

KIT PER ELETTRICISTI Electrician’s kit

Art. 21080201E

Art. 21080202E

Art. 21080207E

6 pcs Ø 22÷64

6 pcs Ø 16÷51 (METRIC)

13 pcs Ø 16÷60 (PG 9÷48)

Composizione

€ 92,509

€ 78,970

Description

€ 148,917

Description

Ø 22 - 29 - 35 44 - 51 - 64

Ø 16 - 20 - 25 32 - 40 - 51

5519 - 5546

Ø 16 - 19 - 20 21 - 22 - 25 29 - 32 - 38 48 - 51 - 54 60 5519 - 5546 1 21070201

KIT PER IDRAULICI Plumber’s kit

Art. 21080204E

€ 83,487 6 pcs Ø 19÷57

Composizione Description

Ø 19 - 22 - 29 38 - 44 - 57 5519 - 5546 1

KIT PER INSTALLATORI Journeyman’s kit

Art. 21080211E

Art. 21080212E

11 pcs Ø 20÷64

11 pcs Ø 19÷83

Composizione

€ 143,276

€ 191,787

Description

Ø 19 - 22 - 25 30 - 35 - 40 51 - 60 - 64 76 - 83

Ø 20 - 22 - 25 - 30 32 - 35 - 40 - 44 51 - 60 - 64 5519 - 5546

5519 - 5546

ESPOSITORI Display

Art. 21080504E

Art. 21080503E

49 pcs Ø 16÷102

24 pcs Ø 16÷83

Composizione

€ 291,087

Description

Ø 16 - 19 - 20 - 22 2x 25 - 30 - 32 - 35 38 - 40 - 48 - 51 57 - 60 - 70 - 83 102 5519 5546

23x18x50 cm

14÷30 32÷210

21070201

4x 6x

Ø 16 - 19 - 20 - 22 1x 25 - 27 - 29 - 30 32 - 35 - 38 - 40 44 - 51 - 54 - 60 64 - 70 - 76 - 83 5519 5546

14÷30 32÷210

2x 2x

203

ASSORTIMENTI SETS

€ 580,829

SEGHE A TAZZA BIMETALLICHE HSS-CO 8 DI NUOVA GENERAZIONE “XTREME” Ultimate bimetal hole saws

HSS-CO 8%

XTREME

21073

Confezione Packaging

55÷60

d 10°

Z 4÷6 - BIM. AISI M42 - Co8%

S max 3

Acciaio / Steel

S max 20

Spessore lavorabile Material tickness workable Legno / Wood

R ≤ 1000 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Plastica Plastic

Legno Wood

Sandwich Sandwich

Truciolato Chipboard

Alte prestazioni - dente rinforzato

AISI M42

High performance - reinforced tooth

Ø pollici / inch

d filetto / thread

14 16 17 19 20 21 22 24 25 27 29 30 32 33 35 37 38 40 41 43 44 45 46 48 50 51 52 54 55 57 59 60 64 65 67 68 70 73 75 76 79 83 86 89 92 95 98 100 102 105 108 111 114 121 127 140 146 152

9/16 5/8 11/16 3/4 13/16 7/8 15/16 1” 1.1/16 1.1/8 1.3/16 1.1/4 1.5/16 1.3/8 1.7/16 1.1/2 1.9/16 1.5/8 1.11/16 1.3/4 1.13/16 1.7/8 2” 2.1/16 2.1/8 2.1/4 2.5/16 2.3/8 2.1/2 2.9/16 2.5/8 2.3/4 2.7/8 3” 3.1/8 3.1/4 3.3/8 3.1/2 3.5/8 3.3/4 3.7/8 4” 4.1/8 4.1/4 4.3/8 4.1/2 4.3/4 5” 5.1/2 6”

UNF 1/2 x 20

cod.

cad/each

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

2107301400 2107301600 2107301700 2107301900 2107302000 2107302100 2107302200 2107302400 2107302500 2107302700 2107302900 2107303000 2107303200 2107303300 2107303500 2107303700 2107303800 2107304000 2107304100 2107304300 2107304400 2107304500 2107304600 2107304800 2107305000 2107305100 2107305200 2107305400 2107305500 2107305700 2107305900 2107306000 2107306400 2107306500 2107306700 2107306800 2107307000 2107307300 2107307500 2107307600 2107307900 2107308300 2107308600 2107308900 2107309200 2107309500 2107309800 2107310000 2107310200 2107310500 2107310800 2107311100 2107311400 2107312100 2107312700 2107314000 2107314600 2107315200

13,648 13,648 13,648 14,635 14,635 15,602 15,602 16,523 16,522 17,973 17,974 19,064 19,064 19,718 20,000 20,491 20,491 21,021 21,477 21,476 23,330 23,330 23,330 23,841 24,688 24,688 27,352 27,352 22,863 27,010 27,613 27,613 29,780 29,780 33,000 33,000 33,000 34,636 35,991 35,991 36,951 38,496 39,191 42,806 44,819 44,819 45,932 45,932 45,932 49,375 53,442 55,117 60,821 62,983 67,635 74,185 77,931 85,309

d mm

cod.

€ cad/each

Ø 14 ÷ 30

HEX 6,35 Q.C.

210705515B

11,911

Ø 32 ÷ 152

HEX 8,5 Q.C.

210705548B

18,671

6,35 x 90

21070202

5,254

UNF 5/8 x 18

Fondo rinforzato Solid steel plated 204

Larghe aperture per un’agevole rimozione del disco Large openings provide for easy plug ejection

€

pcs.

SEGHE A TAZZA BIMETALLICHE HSS-CO 8 A DENTATURA VARIABILE BLU - MOL” HSS - Co 8% bimetal hole saws

21065

HSS-CO 8%

AISI M42

Confezione Packaging

55÷60

10°

Z 4÷6 - BIM. AISI M42 - Co8%

S max 3

Acciaio / Steel

S max 20

Spessore lavorabile Material tickness workable Legno / Wood

R ≤ 1000 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Plastica Plastic

Legno Wood

Sandwich Sandwich

Truciolato Chipboard

Ø pollici / inch

pcs.

cod.

cad/each

€

14 16 17 19 20 21 22 24 25 27 29 30 32 33 35 37 38 40 41 43 44 45 46 48 50 51 52 54 55 57 59 60 64 65 67 68 70 73 75 76 79 83 86 89 92 95 98 100 102 105 108 111 114 121 127 140 146 152

9/16 5/8 11/16 3/4 – 13/16 7/8 15/16 1” 1.1/16 1.1/8 1.3/16 1.1/4 1.5/16 1.3/8 1.7/16 1.1/2 1.9/16 1.5/8 1.11/16 1.3/4 – 1.13/16 1.7/8 – 2” 2.1/16 2.1/8 – 2.1/4 2.5/16 2.3/8 2.1/2 2.9/16 2.5/8 – 2.3/4 2.7/8 – 3” 3.1/8 3.1/4 3.3/8 3.1/2 3.5/8 3.3/4 3.7/8 – 4” 4.1/8 4.1/4 4.3/8 4.1/2 4.3/4 5” 5.1/2 5.3/4 6”

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

2106501400 2106501600 2106501700 2106501900 2106502000 2106502100 2106502200 2106502400 2106502500 2106502700 2106502900 2106503000 2106503200 2106503300 2106503500 2106503700 2106503800 2106504000 2106504100 2106504300 2106504400 2106504500 2106504600 2106504800 2106505000 2106505100 2106505200 2106505400 2106505500 2106505700 2106505900 2106506000 2106506400 2106506500 2106506700 2106506800 2106507000 2106507300 2106507500 2106507600 2106507900 2106508300 2106508600 2106508900 2106509200 2106509500 2106509800 2106510000 2106510200 2106510500 2106510800 2106511100 2106511400 2106512100 2106512700 2106514000 2106514600 2106515200

12,407 12,407 12,407 13,305 13,305 14,183 14,183 15,021 15,021 16,340 16,339 17,331 17,331 17,926 18,181 18,628 18,629 19,110 19,524 19,523 21,210 21,210 21,209 21,674 22,444 22,444 24,866 24,866 24,137 25,724 26,299 26,298 28,362 28,362 31,428 31,428 31,428 32,986 34,277 34,278 35,192 36,663 37,324 40,767 42,685 42,686 43,744 43,744 43,744 47,024 50,897 52,492 57,925 59,984 64,414 70,653 74,219 81,246

Seghe bimetalliche HSS - Co 8% a dentatura variabile e spoglia positiva per il taglio altamente professionale di qualsiasi materiale a spessore sottile quale acciaio, ghisa, alluminio, rame, bronzo, ottone, legno, plastica, fibra di vetro, resine sintetiche, formica, cartongesso. Grande rendimento e durata, taglio pulito. Variable tooth bimetal hole saws for faster and smoother cuts in: iron, steel, aluminium, brass, copper, cast iron, stainless steel, wood and plywood, plastics, fibreglass etc 205

ALBERI PER SEGHE A TAZZA BIMETAL (INTERCAMBIABILI CON UALSIASI ALTRA MARCA) Arbors for bimetal hole saws

ALBERI PER SEGHE BIMETAL Fit hole saws Ø 14÷30 Art. 210705514B

Art. 210705515B Q.C.

Art. 210705519B

Art. 210705518B

14 30 MM

Art. 210705519 SDSB

Per seghe Fit hole saws

d mm

cod.

cad/each

€

Ø 14 ÷ 30 Ø 14 ÷ 30 Ø 14 ÷ 30 Ø 14 ÷ 30 Ø 14 ÷ 30

Ø 6,35 HEX 6,35 Q.C. HEX 8,5 HEX 11 SDS PLUS

210705514B 210705515B 210705519B 210705518B 210705519SDSB

10,014 11,911 11,911 13,338 17,342 14÷30

SDS - PLUS

1/2 x 20

ALBERI PER SEGHE BIMETAL Fit hole saws Ø 32÷210 Art. 210705520B

Art. 210705546 SDSB

Art. 210705521B Q.C.

Art. 210705549 SDSB

Art. 210705546B

Art. 210705545B

Art. 210705547B

32 152 MM

Art. 210705548B Q.C.

Per seghe Fit hole saws

d mm

cod.

cad/each

€

Ø 32 ÷ 152 Ø 32 ÷ 152 Ø 32 ÷ 152 Ø 32 ÷ 152 Ø 32 ÷ 152 Ø 32 ÷ 152 Ø 32 ÷ 152 Ø 32 ÷ 152 Ø 32 ÷ 152

HEX 11 HEX 6,35 Q.C. HEX 8,5 HEX 11 HEX 8,5 Q.C. SDS PLUS SDS PLUS HEX 11 HEX 16

210705520B 210705521B 210705546B 210705547B 210705548B 210705546SDSB 210705549SDSB 210705545B 210705573B

13,821 13,821 20,841 23,339 18,671 30,339 24,271 27,133 22,560 32÷152

Art. 210705573B

5/8 x 18

SDS - PLUS

ALBERI PER SEGHE A TAZZA ARBORS FOR HOLE SAWS

Art. 21070203

206

SDS - PLUS

Art. 21070202

Art. 21070300

Art. 21070302

Punta pilota Pilot drill

Per alberi Fit arbors

€

cod.

cad/each

Ø 6,35 x 115

5514B - 5520B 5545B - 5573B - 5518B

21070203

5,254

Ø 6,35 x 90

5515B - 5519B - 5519SDSB 5521B - 5546B - 5546SDSB 5547B - 5548B - 5549SDSB

21070202

5,254

Adattatore - montato su alberi 5514B - 5519B permette di portare frese da Ø 32 a Ø 152 Arbor adapter - Allows 5514B - 5519B to be used with 1.1/4” through 6” hole saws

21070300

5,164

Prolunga - HEX 11 L = 300 mm 12” extension - to be used with arbors 5518B - 5520B - 5547B - 5545B

21070302

24,174

ASSORTIMENTI SEGHE A TAZZA BIMETALLICHE BLU-MOL” IN VALIGETTE DI PLASTICA Bi-metal hole saws kits in plastic cases

KIT PER ELETTRICISTI Eletrician's kit

KIT METRICO PER ELETTRICISTI Metric electrician’s Kit

Art. 21080201

Art. 21080202

6 pcs Ø 22÷64

6 pcs Ø 16÷51

Composizione

€ 185,681

Description

€ 170,203

Description

Ø 22 - 29 - 35 44 - 51 - 64

Ø 16 - 20 - 25 32 - 40 - 51

5519B - 5546B

KIT PER IDRAULICI Plumber’s Kit

Art. 21080204

€ 185,681 6 pcs Ø 19÷57

Composizione Description

Ø 19 - 22 - 29 38 - 44 - 57 5519B - 5546B 1

KIT PER INSTALLATORI Journeyman’s Kit

Art. 21080205

€ 247,579 9 pcs Ø 19÷64

Composizione Description

Ø 19 - 22 - 29 38 - 38 - 44 51 - 57 - 64 5519B - 5546B

ASSORTIMENTI SETS

207

SEGHE A TAZZA BIMETALLICHE HSS-CO 8 A PASSO FISSO PER LAMIERE SOTTILI

AISI M42 - Co8% constant pitch Bimetal hole saws for metal sheets

21069

HSS-CO 8%

Speciale lamiere sottili

AISI M42

Confezione Packaging

Special for thin sheets

Ø pollici / inch

Attacco Shank

pcs.

cod.

cad/each

€

16 19 20 22 25 27 29 30 32 35 38

5/8 3/4 7/8 1” 1.1/16 1.1/8 1.3/16 1.1/4 1.3/8 1.1/2

1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4”

1 1 1 1 1 1 1 1 1 1 1

210691600 210691900 210692000 210692200 210692500 210692700 210692900 210693000 210693200 210693500 210693800

35,022 35,134 35,227 35,376 34,242 35,581 36,081 35,678 36,836 39,203 40,327

Speciali per trapani a batteria e avvitatori a impulsi Special for cordless power drills and impact power tools

BIM. AISI M42 Co8%

0,5 mm 13 mm

Z=8 Spessore lavorabile Material tickness workable

S max 2

Acciaio / Steel

Speciale disegno del dente: taglio veloce e pulito

Il potere della lama fine: Minimizza il consumo delle batterie e produce meno trucioli per un taglio più veloce e sicuro

Advanced tooth design: smooth and fast cutting

The power of the thin blade: Lightweight blades maximize the use of chargeable impact drivers and drills by using a reduced motor and operation load. Sheet Metal Hole Saws produce fewer chips for easier and safer drilling

R ≤ 1000 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel Cu Zn Ni Ms

Leghe leggere Light alloys

Alu

Alluminio Aluminum

Fermo di sicurezza Safety collar stop

Plastica Plastic

Il sottile spessore della lama e la dentatura costante in AISI M42 le rendono particolarmente adatte al taglio di lamiere sottili di acciaio inox, acciai legati e non, alluminio, metalli non ferrosi, plastica. The thin blade thickness and the AISI M42 constant pitch make these saws special for cutting into thin stainless steel sheet, alloyed steel and non - alloyed steel, non - ferrous metals and plastic.

208

PUNZONI STANDARD CON CUSCINETTO

Standard ball bearing punches

26070 Ø

Pg/M

10 11 12 Pg 7 M 12x1,5

12,5

M 16x1,5

20,5

Pg 13,5 M 20x1,5

Pg 9

Pg 11

21 22 22,5 23 24 25 25,5 26 27 28 28,3 29 30 30,5 32 32,5 33 34 35 36

26071

13 14 15 15,2 16 16,5 17 18 18,6 19 20

Pg 16

M 25x1,5

Pg 21

M 32x1,5

€

cod.

cad/each

Pg/M

cod.

cad/each

1,5 1,5 1,5

2607001000 2607001100 2607001200

81,971 81,971 81,971

Pg 29

1,5

2607001250

81,971

1,5 1,5 1,5 1,5 2 2 2 2 2 2 2

2607001300 2607001400 2607001500 2607001520 2607001600 2607001650 2607001700 2607001800 2607001860 2607001900 2607002000

81,971 91,828 91,828 91,828 67,486 67,486 67,486 67,486 71,776 71,776 71,776

2607002050

71,776

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

2607002100 71,776 2607002200 76,014 2607002250 76,014 2607002300 76,014 2607002400 76,014 2607002500 84,436 2607002550 84,436 2607002600 84,436 2607002700 84,436 2607002800 88,764 2607002830 88,764 2607002900 88,764 2607003000 88,764 2607003050 90,955 2607003200 90,955 2607003250 99,117 2607003300 99,117 2607003400 99,117 2607003500 99,117 2607003600 107,708

37 38 39 40 40,5 41 42 43 44 45 46 47 48 50 50,5 51 52 52,5 54 55 57 58 59 60 60,5 61 62 63 63,5 64 65 70 73 75 80 85 89 102

2 2 2 2 3 2 2 2 2 2 2 2 2 2 4 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3,5 3,5 3,5 3,5 3,5 3,5 3,5

2607003700 2607003800 2607003900 2607004000 2607004050 2607004100 2607004200 2607004300 2607004400 2607004500 2607004600 2607004700 2607004800 2607005000 2607005050 2607005100 2607005200 2607005250 2607005400 2607005500 2607005700 2607005800 2607005900 2607006000 2607006050 2607006100 2607006200 2607006300 2607006350 2607006400 2607006500 2607007000 2607007300 2607007500 2607008000 2607008500 2607008900 2607010200

107,708 107,708 130,460 130,460 130,460 130,460 142,430 142,430 142,430 152,299 152,299 152,299 164,998 164,998 180,515 180,515 180,515 266,528 193,200 193,200 205,886 205,886 205,886 224,218 331,405 224,218 224,218 273,581 273,581 273,581 273,581 344,092 403,324 403,324 480,889 689,591 700,883 981,505

TIRANTI CON CUSCINETTI

M 40x1,5

Pg 36

M 50x1,5

Pg 42

Pg 48

M 63x1,5

TIRANTI PER POMPA IDRAULICA

Draw stud

Draw stud for hydraulic pump

26084

€

cod.

cad/each

Ø 10÷13 Ø 14÷15.2 Ø 16÷38 Ø 39÷50 Ø 51÷62 Ø 66÷85 Ø 86÷102

6x1 8x1 10x1 12x1,5 16x1,5 20x1,5 24x1,5

5 13 17 19 24 30 36

2607106X1 2607108X1 2607110X1 2607112X15 2607116X15 2607120X15 2607124X15

35,648 43,569 21,197 27,011 31,372 39,816 62,227

a = Dimensione della chiave per la testa del tirante

Per punzoni For punches

cod.

cad/each

€

Ø14÷15,2 Ø16÷38 Ø39÷50 Ø51÷62 Ø63÷85 Ø89÷102

8x1 10 x 1 12 x 1,5 16 x1,5 20 x 1,5 24 x 1,5

38 40 50 60 73 81

2608408x1 2608410x1 2608412x15 2608416x15 2608420x15 2608424x15

60,641 60,641 60,641 60,641 76,156 83,197

24 mm

Per punzoni For punches

3/4x16UNF

Applicazioni Applications

Adatti per fori precisi in lamiere di acciaio, acciaio inox, tutti i metalli, plastica Acciaio Steel

Metalli Metals INOX

Inox Stainless

For precise holes in steel and stainless steel metal sheets, metals, plastics

209

ASSORTIMENTI PUNZONI Set of ball bearing punches

Art. 26085100

€ 406,412 Utilizzo con chiave To be used with wrench

Composizione Description

Pg 7 - Pg 29 Ø 12,5 - 15,2 - 18,6 20,5 - 22,5 - 28,3 37

Art. 26085110

Utilizzo con chiave To be used with wrench

Art. 26085111

€ 1.205,735

€ 1.027,582

Composizione

Pg 7 - Pg 48

M 12x1,5 - M 63x1,5

Ø 12,5 - 15,2 - 18,6 20,5 - 22,5 - 28,3 37 - 47 - 54 - 60

Ø 12,5 - 16,5 - 20,5 25,5 - 32,5 - 40,5 50,5 - 63,5

Description

Ø 7÷21 mm

Art. 26085112

Art. 26085113

Composizione

Pg 9 - Pg 48

M 16x1,5 - M 63x1,5

Ø 15,2 - 18,6 - 20,5 22,5 - 28,3 - 37 47 - 54 - 60

Ø 16,5 - 20,5 - 25,5 32,5 - 40,5 - 50,5 63,5

€ 1.762,824 Utilizzo con pompa idraulica To be used with hydraulic pump

210

Description

€ 1.475,880

Description

ASSORTIMENTI PUNZONI Set of ball bearing punches

ASSORTIMENTI PUNZONI CON POMPA IDRAULICA Set of ball bearing punches with hydraulic pump

Art. 26085120

Art. 26085121

Composizione

Pg 9 - Pg 29

M 16x1,5 - M 40x1,5

Ø 15,2 - 18,6 - 20,5 22,5 - 28,3 - 37

Ø 16,5 - 20,5 - 25,5 32,5 - 40,5

Pompa/Pump Art. 2607514

€ 1.879,248 Utilizzo con pompa idraulica To be used with hydraulic pump

Description

€ 1.879,248

Description

POMPA IDRAULICA Hydraulic pump

Art. 2607514

€ 1.598,320

Pompa idraulica manuale a testa orientabile (600 bar) tilizzo con punzoni fino a 63,5 mm - Contiene 4 tiranti e 4 spessori. Hydraulic pump with revolving head - With 4 drawstud and 4 shims.

Art.2607515

€ 2.890,937

ASSORTIMENTI SETS

In esaurimento To be discontinued

Pompa idraulica manuale (700 bar) tilizzo con punzoni fino a 150 mm. Lunghezza tubo: 0,9 m Hand Hydraulic pump.

211

212

PUNTE A GRADINO E SVASATORI

SUBLAND TWIST DRILLS AND COUNTERSINKS

213

PUNTE A GRADINO PER FORI PASSANTI DI SEDI VITI - 18 Subland twist drills for through screw holes - 180°

01103

HSS

180° - Grado fine

DIN 8376 Confezione Packaging

Vite Thread M

Eliche indipendenti Independent spirals

180° - Fine grade

Applicazioni

3 4 5 6 8 10

€

cod.

cad/each

3,4 4,5 5,5 6,6 9 11

6 8 10 11 15 18

9 11 13 15 19 23

57 75 87 94 114 130

93 117 133 142 169 191

011030300 011030400 011030500 011030600 011030800 011031000

38,754 43,604 53,304 62,980 78,476 117,254

Applications

Acciaio Steel

D D

Metalli Metals

Ø l1

Alluminio Aluminum

Alu

01059

HSS

Elica singola Single spiral

180° - Grado fine

DIN 8376 SERIE CORTA

180° - Fine grade

Confezione Packaging

Applicazioni

Vite Thread M

Applications

Acciaio Steel

Metalli Metals

3 4 5 6 8 10

€

cod.

cad/each

3,4 4,5 5,5 6,6 9,0 11,0

6 8 10 11 15 18

9 11 13 15 19 23

28 37 43 47 56 62

66 79 89 95 111 123

010590300 010590400 010590500 010590600 010590800 010591000

17,472 21,850 32,773 48,066 69,903 109,235

180° D Ø

D l1

l L

01104

HSS

DIN 8377 Confezione Packaging

Eliche indipendenti Independent spirals

Applicazioni Applications

Acciaio Steel

Vite Thread M

180° - Grado fine

CODOLO CONICO

5 6 8 10 12 14 16 18 20

Metalli Metals

180° - Fine grade

cod.

cad/each

5,5 6,6 9 11 13,5 15,5 17,5 20 22

10 11 15 18 20 24 26 30 33

13 15 19 23 27 31 35 39 43

87 94 114 130 140 160 165 175 185

168 175 212 228 238 281 286 296 334

1 1 2 2 2 3 3 3 4

011040500 011040600 011040800 011041000 011041200 011041400 011041600 011041800 011042000

78,951 82,890 111,602 146,889 182,296 222,952 262,300 304,268 354,101

D D

Alluminio Aluminum Alu

Ø l1

l L

214

€

FRESE CON PERNO GUIDA PER FORI PASSANTI DI SEDI VITI - 18 Deburring tools for through screw holes - 180°

01273

HSS

180° - Grado fine

DIN 373 Confezione Packaging

180° - Fine grade

Vite Thread M

Applicazioni Applications

Acciaio Steel Metalli Metals

3 4 5 6 8 10 12

€

cod.

cad/each

6 8 10 11 15 18 20

3,2 4,3 5,3 6,4 8,4 10,5 13,0

71 71 80 80 100 100 100

5 5 8 8 12,5 12,5 12,5

0127303 0127304 0127305 0127306 0127308 0127310 0127312

21,366 21,366 21,366 22,173 35,635 42,772 46,721

Alluminio Aluminum

Art. 01275100

Alu

€ 190,384

rado fine per viteria/bulloneria di precisione.

6 pcs M 3÷10

Fine grade to fit precision screwing.

01274

HSS

180° - Grado medio

DIN 373 Confezione Packaging

180° - Medium grade

Vite Thread M

Applicazioni Applications

Acciaio Steel Metalli Metals

3 4 5 6 8 10 12

cod.

cad/each

6 8 10 11 15 18 20

3,4 4,5 5,5 6,6 9,0 11,0 14,0

71 71 80 80 100 100 100

5 5 8 8 12,5 12,5 12,5

0127403 0127404 0127405 0127406 0127408 0127410 0127412

21,366 21,366 21,366 22,173 35,635 42,772 49,180 Art. 01275101

Alluminio Aluminum

€ 190,384

Grado medio per meccanica standard.

Alu

6 pcs

Medium grade to fit standard coupling.

01277

HSS

TiAlN Confezione Packaging

Applicazioni Applications

Acciaio Steel Metalli Metals

€

M 3÷10

180° - Grado medio

DIN 373 Vite Thread M

3 4 5 6 8 10 12

180° - Medium grade €

cod.

cad/each

6 8 10 11 15 18 20

3,4 4,5 5,5 6,6 9,0 11,0 14,0

71 71 80 80 100 100 100

5 5 8 8 12,5 12,5 12,5

0127703 0127704 0127705 0127706 0127708 0127710 0127712

25,613 31,524 32,799 39,404 56,673 68,146 90,400

Alluminio Aluminum Alu

d1 Ø L

215

PUNTE A GRADINO PER FORI PASSANTI DI SEDI VITI Subland twist drills for through screw holes

01101

HSS

90° - Grado fine

DIN 8374 Confezione Packaging

Vite Thread M

Eliche indipendenti Independent spirals

90° - Fine grade

3 4 5 6 8 10

€

cod.

cad/each

3,2 4,3 5,3 6,4 8,4 10,5

6 8 10 11,5 15 19

9 11 13 15 19 23

57 75 87 94 114 135

93 117 133 142 169 198

011010300 011010400 011010500 011010600 011010800 011011000

44,052 50,527 63,782 73,420 124,335 192,796

Applicazioni Applications

Acciaio Steel

90°

D D

Metalli Metals

Alu

Alluminio Aluminum

01058

HSS

90° - Grado fine

DIN 8374 SERIE CORTA

90° - Fine grade

Confezione Packaging

Elica singola Single spiral

Vite Thread M

Applicazioni Applications

3 4 5 6 8 10

Acciaio Steel

€

cod.

cad/each

3,2 4,3 5,3 6,4 8,4 10,5

6 8 10 11,5 15 19

9 11 13 15 19 23

28 37 43 47 56 62

66 79 89 95 111 123

010580300 010580400 010580500 010580600 010580800 010581000

17,472 21,850 32,773 48,066 69,903 109,235

90°

D Ø

D l1

Metalli Metals

01102

HSS

90° - Grado fine

DIN 8375 CODOLO CONICO Confezione Packaging

Eliche indipendenti Independent spirals

Vite Thread M

5 6 8 10

90° - Fine grade €

M.K.

cod.

cad/each

5,5 6,6 9 11

11 13 17,2 21,5

13 15 19 23

94 101 130 150

175 182 228 248

1 1 2 2

011020500 011020600 011020800 011021000

85,570 114,986 146,889 203,286

Applicazioni Applications

Acciaio Steel

90°

D D

Metalli Metals Alluminio Aluminum Alu

216

Ø l1

l L

PUNTE A GRADINO E FRESE PER PREFORI DI FILETTATURA Subland twist drills and deburring tools for thread core holes

01117

HSS

90° - Per prefori di filettature

DIN 8378

90° - For thread core hole

Confezione Packaging

Vite Thread

Eliche indipendenti Independent spirals

Applicazioni Applications

Acciaio Steel

3 4 5 6 8 10 12

€

cod.

cad/each

2,5 3,3 4,2 5 6,8 8,5 10,2

3,4 4,5 5,5 6,6 9,0 11 13,5

8,8 11,4 13,6 16,5 21 25,5 30

39 47 57 63 81 94 108

70 80 93 101 125 142 160

011170300 011170400 011170500 011170600 011170800 011171000 011171200

48,821 52,083 53,714 61,849 69,980 91,140 118,800

90°

90° D

Metalli Metals

Ø l1

l L

01057

HSS

90° - Per prefori di filettature

DIN 8378 SERIE CORTA

90° - For thread core hole

Confezione Packaging

Elica singola Single spiral

Vite Thread M

Applicazioni Applications

Acciaio Steel

3 4 5 6 8 10 12

€

cod.

cad/each

2,5 3,3 4,2 5,0 6,8 8,5 10,2

3,4 4,5 5,5 6,6 9,0 11,0 13,5

8,8 11,4 13,6 16,5 21,0 25,5 30,0

20 24 28 31 40 47 54

52 58 66 70 84 95 107

010570300 010570400 010570500 010570600 010570800 010571000 010571200

18,351 18,351 20,970 23,597 31,461 47,183 65,537

90° D Ø

90°

Metalli Metals

D l1

l L

01272

HSS

180° - Per prefori di filettature

DIN 373 Confezione Packaging

180° - For thread core hole

Vite Thread M

Applicazioni Applications

3 4 5 6 8 10 12

€

cod.

cad/each

6 8 10 11 15 18 20

2,5 3,3 4,2 5,0 6,8 8,5 10,2

71 71 80 80 100 100 100

5 5 8 8 12,5 12,5 12,5

0127203 0127204 0127205 0127206 0127208 0127210 0127212

21,366 21,366 21,366 22,173 35,635 42,772 46,721

Acciaio Steel Metalli Metals Alluminio Aluminum

d1 Ø L

Alu

217

PUNTE A CENTRARE Center drills

01110

HSS-G

DIN 333/A

HSS-G

01214

HSS-G

HSS-G + TiN

01374

HSS-G

218

HSS-G

60°

Ø k12

D h8

pcs.

cod.

cad/each

1 1,6 2 2,5 3,15 4 5 6,3

3,15 4 5 6,3 8 10 12,5 16

31,5 35,5 40 45 50 56 63 71

1 1 1 1 1 1 1 1

011100100 011100160 011100200 011100250 011100315 011100400 011100500 011100630

6,375 6,246 6,610 7,119 8,332 16,272 22,086 37,159

TiN

DIN 333/A

€

60°

Ø k12

D h8

pcs.

cod.

cad/each

1 1,6 2 2,5 3,15 4 5 6,3

3,15 4 5 6,3 8 10 12,5 16

31,5 35,5 40 45 50 56 63 71

1 1 1 1 1 1 1 1

012140100 012140160 012140200 012140250 012140315 012140400 012140500 012140630

10,373 10,510 10,941 11,813 13,397 22,512 30,601 45,917

DIN 333/A ESECUZIONE PROLUNGATA

€

60° €

pcs.

cod.

cad/each

1 1,6 2 2,5 3,15

4 5 6 8 10

120 120 120 120 120

1 1 1 1 1

013740100 013740160 013740200 013740250 013740315

28,315 28,315 28,315 30,834 59,762

PUNTE A CENTRARE Center drills

01375

HSS-G

DIN 333/A ESECUZIONE CON PIANO

1,6 2 2,5 3,15 4 5 6,3

4 5 6,3 8 10 12,5 16

35,5 40 45 50 56 63 71

HSS-G S

01112

HSS-G

HSS-G + TiN

HSS-G

€

pcs.

cod.

cad/each

1 1 1 1 1 1 1

013750160 013750200 013750250 013750315 013750400 013750500 013750630

17,268 17,268 17,268 21,877 30,834 47,180 83,039

DIN 333/B

HSS-G

01217

3,25 4,2 5,35 6,95 8,4 10,95 14

60°

60° / 120° €

pcs.

cod.

cad/each

1 1,6 2 2,5 3,15 4 5 6,3

4 6,3 8 10 11,2 14 18 20

35,5 45 50 56 60 67 75 80

1 1 1 1 1 1 1 1

011120100 011120160 011120200 011120250 011120315 011120400 011120500 011120630

9,727 10,652 11,500 14,681 17,641 27,914 35,097 51,475

TiN

DIN 333/B

60° / 120°

pcs.

cod.

1 1,6 2 2,5 3,15 4 5 6,3

4 6,3 8 10 11,2 14 18 20

35,5 45 50 56 60 67 75 80

1 1 1 1 1 1 1 1

012170100 012170160 012170200 012170250 012170315 012170400 012170500 012170630

€ cad/each

15,547 16,264 17,287 24,966 27,048 40,454 56,624 74,558

PUNTE A CENTRARE Center drills

01111

HSS-G

DIN 333/R

A RAGGIO

Ø r

HSS-G L

120° D

01216

Ø 1 1,6 2 2,5 3,15 4 5 6,3

TiN

HSS-G

€

pcs.

cod.

cad/each

3,15 5 6,3 8 10 12,5 16 20

3,15 4 5 6,3 8 10 12,5 16

31,5 35,5 40 45 50 56 63 71

1 1 1 1 1 1 1 1

011110100 011110160 011110200 011110250 011110315 011110400 011110500 011110630

6,375 6,246 6,610 7,119 8,332 16,272 22,086 37,159

DIN 333/R

A RAGGIO

Ø r

HSS-G + TiN L

120° D

Ø 1 1,6 2 2,5 3,15 4 5 6,3

€

pcs.

cod.

cad/each

3,15 5 6,3 8 10 12,5 16 20

3,15 4 5 6,3 8 10 12,5 16

31,5 35,5 40 45 50 56 63 71

1 1 1 1 1 1 1 1

012160100 012160160 012160200 012160250 012160315 012160400 012160500 012160630

10,735 10,889 11,393 12,410 14,237 23,704 32,549 49,300

PUNTE A CENTRARE CILINDRICHE PER CENTRI CN Center drills for CN machines

01361

METALLO DURO

VHM

90°

Carbide

90°

Ø h7

pcs.

cod.

cad/each

€

5 6 8 10 12 14 16 20

10 15 20 22 22 25 25 30

50 50 63 72 73 75 82 104

1 1 1 1 1 1 1 1

013610500 013610600 013610800 013611000 013611200 013611400 013611600 013612000

44,171 57,420 79,504 110,415 176,671 238,208 309,173 530,013

01363

METALLO DURO

VHM

120°

Carbide

120°

Ø h7

pcs.

cod.

cad/each

€

5 6 8 10 12 14 16 20

10 15 20 22 22 25 25 30

50 50 63 72 73 75 82 104

1 1 1 1 1 1 1 1

013630500 013630600 013630800 013631000 013631200 013631400 013631600 013632000

44,171 57,420 79,504 110,415 176,671 238,208 309,173 530,013

01364

HSS-G

90°

90° HSS Ø

01365

l mm

L mm

pcs.

cod.

cad/each

3 4 5 6 8 10 12 14 16 20

12 12 14 16 21 25 30 33 37 45

46 55 62 66 79 89 102 107 115 131

1 1 1 1 1 1 1 1 1 1

013640300 013640400 013640500 013640600 013640800 013641000 013641200 013641400 013641600 013642000

13,811 14,769 16,615 19,213 29,059 36,784 51,964 74,184 80,884 138,317

HSS-G

€

120°

120° HSS

l mm

L mm

pcs.

cod.

cad/each

€

3 4 5 6 8 10 12 14 16 20

12 12 14 16 21 25 30 33 37 45

46 55 62 66 79 89 102 107 115 131

1 1 1 1 1 1 1 1 1 1

013650300 013650400 013650500 013650600 013650800 013651000 013651200 013651400 013651600 013652000

13,811 14,769 16,615 19,213 29,059 36,784 51,964 74,184 80,884 138,317

221

SVASATORI A 3 TAGLIENTI A

IN METALLO DURO

01264

DIN 335/C-90°

90° 3 flutes carbide countersinks MD

TiAlN Confezione

90°

Packaging

CBN

Z=3

Applicazioni Applications

Carbide

Ø h10

d h7

6,3 8,3 10,4 12,4 16,5 20,5 25

6 6 6 8 10 10 10

50 50 60 60 60 63 67

Ø h10

d h7

6,3 8,3 10,4 12,4 16,5 20,5 25

6 6 6 8 10 10 10

50 50 60 60 60 63 67

per viti / for screws

€

DIN 74 BF

cod.

cad/each

M3 M4 M5 M6 M8 M 10 M 12

012640630 012640830 012641040 012641240 012641650 012642050 012642500

117,743 127,690 137,128 150,395 214,446 335,358 478,322

DIN 74 BF

cod.

cad/each

M3 M4 M5 M6 M8 M 10 M 12

012630630 012630830 012631040 012631240 012631650 012632050 012632500

102,799 112,431 115,644 128,492 186,309 295,536 417,600

Inox Stainless

INOX

Acciaio Steel

Metalli Metals

01263

Carbide Packaging

CBN

Z=3

Applicazioni Applications

Inox Stainless

Acciaio Steel

Metalli Metals

222

DIN 335/C-90° Confezione

90°

INOX

per viti / for screws

€

SVASATORI A CON GEOMETRIA ASIMMETRICA DEI 3 TAGLIENTI E FORMA ELICOIDALE

90° 3 uniqual cutting edges countersinks with spiral shape

01265

HSS

Confezione

90°

Finitura perfetta Massima elocità

~DIN 335-90° ASIMMETRICO ELICOIDALE Packaging

Ø mm

d mm

L mm

6,3 8,3 10,4 12,4 15 16,5 20,5 25 31

5 6 6 8 10 10 10 10 12

45 50 50 56 60 60 63 67 71

per viti / for screws DIN 74 AF

€

DIN 74 BF

cod.

cad/each

M3 M4 M5 M6

012650630 012650830 012651040 012651240 012651500 012651650 012652050 012652500 012653100

15,327 17,379 20,937 22,598 26,488 27,673 38,084 58,485 80,535

CBN

Z=3 Ø

M8 M8 M10 M12 M16

Art. 01270114

€ 145,000 ABS

6 pcs Ø 6,3 - 8,3 - 10,4 12,4 - 16,5 - 20,5

Applicazioni Applications

Acciaio Steel

Metalli Metals

Geometria asimmetrica Unequal pitch

Geometria a spirale Spiral geometry

3 Taglienti 90° 3 flutes 90

MINORI VIBRAZIONI, FINITURA PERFETTA: la speciale forma elicoidale dei taglienti smorza sensibilmente le vibrazioni che si sviluppano durante le lavorazioni anche più gravose, contribuendo a migliorare il livello di finitura oltre che l’esperienza di utilizzo con elettroutensili portatili. MASSIMA VELOCITÀ: la forma a spirale dei taglienti permette una più rapida ed efficiente espulsione dei trucioli, garantendo lavorazioni estremamente rapide. HSS: utensile prodotto con acciaio super rapido di alta qualità, ideale per lavori di svasatura su acciai legati, ghise, tutti i metalli in generale. PIANETTI ANTISLITTAMENTO: il codolo è dotato di tre le superfici rettificate che garantiscono la massima presa delle griffe eliminando il rischio di slittamento dell’utensile nel mandrino. LESS VIBRATIONS, PERFECT FINISH: the special helical shape of the cutting edges significantly RED CES the vibrations that develop during the heaviest jobs, helping to improve the level of finish as well as the experience of using portable power tools. MAXIMUM SPEED: the spiral shape of the cutting edges allows for faster and more efficient chip ejection, guaranteeing machining extremely fast. HSS: tool produced with high quality super-rapid steel, ideal for flaring work on alloy steels, cast irons, all metals in general. ANTI-SLIP PLATES: the SHANK is equipped with three ground surfaces that guarantee maximum grip of the jaws, eliminating the risk slippage of the tool in the spindle.

223

SVASATORI A

CON GEOMETRIA ASIMMETRICA DEI 3 TAGLIENTI

90° 3 uniqual cutting edges countersinks

01267

HSS-CO

Asimmetrico - Finitura perfetta

~DIN 335-90° Confezione

90°

Packaging

CBN

Z=3 Ø

Ø mm

d mm

L mm

6,3 8,3 10,4 12,4 15 16,5 20,5 25 31

5 6 6 8 10 10 10 10 12

45 50 50 56 60 60 63 67 71

per viti / for screws DIN 74 AF

€

DIN 74 BF

cod.

cad/each

M3 M4 M5 M6

012670630 012670830 012671040 012671240 012671500 012671650 012672050 012672500 012673100

16,493 18,580 26,665 29,832 34,173 36,680 50,919 69,189 92,555

M8 M8 M10 M12 M16

Art. 01270113

ABS

Applicazioni Applications

Inox Stainless

Acciaio Steel

€ 156,000

6 pcs Ø 6,3 - 8,3 - 10,4 12,4 - 16,5 - 20,5

Metalli Metals

INOX

01266

HSS

Confezione

90°

Asimmetrico - Finitura perfetta

~DIN 335-90° Packaging

Ø mm

d mm

L mm

6,3 8,3 10,4 12,4 15 16,5 20,5 25 31

5 6 6 8 10 10 10 10 12

45 50 50 56 60 60 63 67 71

per viti / for screws DIN 74 AF

€

DIN 74 BF

cod.

cad/each

M3 M4 M5 M6

012660630 012660830 012661040 012661240 012661500 012661650 012662050 012662500 012663100

14,191 16,092 19,386 20,924 24,526 25,623 35,263 54,153 74,569

CBN

Z=3 Ø

M8 M8 M10 M12 M16

Art. 01270112

€ 131,000

Geometria asimmetrica Unequal pitch

ABS

Applicazioni Applications

Acciaio Steel

Metalli Metals

3 Taglienti 90° 3 flutes 90

GEOMETRIA ASIMMETRICA: la speciale geometria asimmetrica, grazie al differente angolo di spoglia di ciascun tagliente, garantisce una perfetta finitura del foro, che risulta tondo e liscio. HSS e HSS-CO: utensile ideale per lavori di svasatura su acciai legati, ghise, tutti i metalli in generale e, nella versione al cobalto 5%, anche su acciao inox. PIANETTI ANTISLITTAMENTO: il codolo è dotato di tre superfici rettificate (per ø ≥12,4 mm) che garantiscono la massima presa delle griffe eliminando il rischio di slittamento dell’utensile nel mandrino. ASYMMETRIC GEOMETRY: the special asymmetric geometry, thanks to the different rake angle of each cutting edge, guarantees perfect finish of the hole, which is round and smooth. HSS and HSS-CO: ideal tool for flaring work on alloy steels, cast irons, all metals in general and, in the 5% cobalt version, also on stainless steel. ANTI-SLIP PLATES: the tang has three ground surfaces (for eliminating the risk of tool slippage in the spindle. 224

12.4 mm) which guarantee maximum grip of the jaws

6 pcs Ø 6,3 - 8,3 - 10,4 12,4 - 16,5 - 20,5

SVASATORI A 3 TAGLIENTI A

90° 3 cutting edges countersinks

01262

HSS-CO

TiAlN

DIN 335/C-90°

Confezione

90°

Packaging

Ø mm

d mm

L mm

6,3 8,3 10,4 12,4 15 16,5 20,5 25 28 30 31 40

5 6 6 8 10 10 10 10 12 12 12 15

45 50 50 56 60 60 63 67 71 71 71 80

per viti / for screws DIN 74 AF

€

DIN 74 BF

cod.

cad/each

M3 M4 M5 M6

012620630 012620830 012621040 012621240 012621500 012621650 012622050 012622500 012622800 012623000 012623100 012624000

17,837 23,358 34,211 42,470 46,598 50,727 69,602 106,173 112,281 119,336 126,228 145,377

CBN

Z=3

Applicazioni Applications

Inox Stainless

INOX

Acciaio Steel

M8 M8 M 10 M 12 M 16

Metalli Metals

Art. 01270111

€ 207,569

6 pcs Ø 6,3 - 8,3 - 10,4 12,4 - 16,5 - 20,5

01261

DIN 335/C-90° Confezione

90°

Packaging

CBN

Z=3

Applicazioni Applications

INOX

HSS-CO

Inox Stainless

Acciaio Steel

Metalli Metals

Ø mm

d mm

L mm

6,3 8,3 10,4 12,4 15 16,5 20,5 25 28 30 31 40

5 6 6 8 10 10 10 10 12 12 12 15

45 50 50 56 60 60 63 67 71 71 71 80

per viti / for screws DIN 74 AF

€

DIN 74 BF

cod.

cad/each

M3 M4 M5 M6

012610630 012610830 012611040 012611240 012611500 012611650 012612050 012612500 012612800 012613000 012613100 012614000

14,341 16,157 23,187 25,941 29,716 31,896 44,278 60,165 64,482 68,995 80,482 85,224

M8 M8 M 10 M 12 M 16

Art. 01270110

€ 135,598

6 pcs Ø 6,3 - 8,3 - 10,4 12,4 - 16,5 - 20,5

225

SVASATORI A 3 TAGLIENTI A

90° 3 cutting edges countersinks

01260

HSS

TiN

DIN 335/C-90°

Confezione

90°

Packaging

CBN

Z=3

Applicazioni Applications

Acciaio Steel

Metalli Metals

Ø mm

d mm

L mm

4,3 5 5,3 5,8 6 6,3 7 7,3 8 8,3 9,4 10 10,4 11,5 12,4 13,4 15 16,5 19 20,5 23 25 26 28 30 31 40

4 4 4 5 5 5 6 6 6 6 6 6 6 8 8 8 10 10 10 10 10 10 12 12 12 12 15

40 40 40 45 45 45 50 50 50 50 50 50 50 56 56 56 60 60 63 63 67 67 67 71 71 71 80

per viti / for screws DIN 74 AF

DIN 74 BF

M 2,5

M3 M3 M 3,5 M4 M4 M5 M5 M6 M6 M8 M8 M 10 M 10 M 12 M 12 M 14 M 14 M 16 M 16

€

cod.

cad/each

012600430 012600500 012600530 012600580 012600600 012600630 012600700 012600730 012600800 012600830 012600940 012601000 012601040 012601150 012601240 012601340 012601500 012601650 012601900 012602050 012602300 012602500 012602600 012602800 012603000 012603100 012604000

17,532 17,532 17,532 17,773 17,773 18,149 19,460 19,460 19,836 19,836 21,272 25,055 25,055 26,564 26,564 28,996 31,015 34,689 43,780 45,384 71,402 69,140 82,741 86,136 88,409 90,674 130,746

Art. 01270109

€ 170,013

6 pcs Ø 6,3 - 8,3 - 10,4 12,4 - 16,5 - 20,5

226

SVASATORI A 3 TAGLIENTI A

90° 3 cutting edges countersinks

01185

HSS

DIN 335/C-90° Confezione

90°

Packaging

CBN

Z=3

Applicazioni Applications

Acciaio Steel

Metalli Metals

Ø mm

d mm

L mm

4,3 5 5,3 5,8 6 6,3 7 7,3 8 8,3 9,4 10 10,4 11,5 12,4 13,4 15 16,5 19 20,5 23 25 26 28 30 31 40

4 4 4 5 5 5 6 6 6 6 6 6 6 8 8 8 10 10 10 10 10 10 12 12 12 12 15

40 40 40 45 45 45 50 50 50 50 50 50 50 56 56 56 60 60 63 63 67 67 67 71 71 71 80

per viti / for screws DIN 74 AF

DIN 74 BF

M 2,5

M3 M3 M 3,5 M4 M4 M5 M5 M6 M6 M8 M8 M 10 M 10 M 12 M 12 M 14 M 14 M 16 M 16

€

cod.

cad/each

011850430 011850500 011850530 011850580 011850600 011850630 011850700 011850730 011850800 011850830 011850940 011851000 011851040 011851150 011851240 011851340 011851500 011851650 011851900 011852050 011852300 011852500 011852600 011852800 011853000 011853100 011854000

11,970 11,970 11,970 12,342 12,342 12,342 13,679 13,679 13,995 13,995 15,346 16,860 16,860 18,198 18,198 21,330 21,330 22,285 30,668 30,668 47,097 47,097 61,091 61,091 64,853 64,853 73,357

Art. 01270107

€ 113,334

6 pcs Ø 6,3 - 8,3 - 10,4 12,4 - 16,5 - 20,5

227

SVASATORI A

CON ATTACCO ESAGONALE 1/4”

90° countersink with 1/4” hexagon shank

19003

HSS

Attacco 1/4" HEX form E

DIN 335/C-90°

1/4" HEX form E

90°

CBN

Z=3

6,3 8,3 10,4 12,4 16,5 20,5

40 45 47 49 52 55

per viti / for screws

1/4 1/4 1/4 1/4 1/4 1/4

€

DIN 74 BF

cod.

cad/each

M3 M4 M5 M6 M8 M 10

190030630 190030830 190031040 190031240 190031650 190032050

12,340 13,993 16,857 18,195 22,281 30,663

Applicazioni Applications

Metalli Metals

Acciaio Steel

19001

HSS

Attacco 1/4" HEX

DIN 335/C-90°

1/4" HEX

90°

CBN

Z=3

6,3 8,3 10,4 12,4 16,5 20,5

31 31 34 35 40 41

per viti / for screws

1/4 1/4 1/4 1/4 1/4 1/4

€

DIN 74 BF

cod.

cad/each

M3 M4 M5 M6 M8 M 10

19001063 19001083 19001104 19001124 19001165 19001205

12,340 13,993 16,857 18,195 22,281 30,663

Applicazioni Applications

Acciaio Steel

Metalli Metals

Magnetico Magnetic

ØxL 33x120

Art. 19002 Self Disponibile su richiesta On demand

€

cod.

cad/each

19001000

16,624

Art. 19020214

€ 113,281

6 pcs HSS Attacco 1/4" HEX Ø 6,3 - 8,3 - 10,4 12,4 - 16,5 - 20,5

228

SVASATORI A 3 TAGLIENTI A

90° 3 cutting edges countersinks

01193

HSS

90°

Z=3

Applicazioni

Serie lunga

DIN 335/C-90° Ø mm

cod.

cad/each

€

6,3 8,3 10,4 12,4 15 16,5 20,5 25

5 6 6 8 10 10 10 10

104 105 107 108 109 111 114 118

011930630 011930830 011931040 011931240 011931500 011931650 011932050 011932500

28,726 32,340 39,052 41,494 47,596 51,068 70,922 107,063

Lunghezza del codolo 100 mm

Applications

Shank lenght 100 mm Acciaio Steel

Metalli Metals

01196

HSS

Codolo Morse

DIN 335/D-90°

90°

Z=3

Applicazioni Applications

Ø mm

DIN 74 AF

per viti / for screws

15 16,5 19 20,5 23 25 26 28 30 31 34 37 40 50

1 1 2 2 2 2 2 2 2 2 2 2 3 3

85 85 100 100 106 106 106 112 112 112 118 118 140 150

DIN 74 BF

M8 M 10 M 10 M 12 M 12 M 14 M 14 M 16 M 18 M 20

M 16 M 18 M 20

€

cod.

cad/each

011961500 011961650 011961900 011962050 011962300 011962500 011962600 011962800 011963000 011963100 011963400 011963700 011964000 011965000

43,146 50,822 59,716 61,243 64,294 84,828 84,828 104,131 112,392 122,601 138,655 156,173 217,475 351,762

Acciaio Steel

Metalli Metals

SVASATORI A

90° countersinks

01192

HSS

90°

Z=1

1 tagliente

DIN 335/C 90°

1 cutting edge

Ø mm

cod.

cad/each

€

6 8 10 12 16 20 25 30

5 6 6 8 10 10 10 12

45 50 50 56 60 63 67 71

011920600 011920800 011921000 011921200 011921600 011922000 011922500 011923000

22,659 25,146 26,673 33,936 41,200 60,902 100,517 130,980

Applicazioni Applications

Metalli Metals

Plastica Plastic

01188 90°

Ø min Ø max

Speciale alluminio e plastica

HSS

Gr.

Ø min - max

cod.

cad/each

€

1 2 3 4 5 6 7 8 9

2÷5 5 ÷ 10 10 ÷ 15 15 ÷ 20 20 ÷ 25 25 ÷ 30 30 ÷ 35 35 ÷ 40 40 ÷ 50

6 8 10 12 15 15 15 15 20

45 48 65 85 102 115 127 136 166

0118801 0118802 0118803 0118804 0118805 0118806 0118807 0118808 0118809

17,212 21,725 42,775 75,798 138,436 204,085 266,868 375,339 460,963

Applicazioni Applications

Metalli Metals

Speciale per alluminio, metalli leggeri e plastica. Lavora senza vibrazioni, ottima finitura. Alluminio Aluminum Alu

Plastica Plastic

For alluminium, metals and plastics. For deburring and small chamfers. Best surface finish. Works without vibrations.

SVASATORI A 3 TAGLIENTI A 75 E 6

3 75° and 60° cutting edges countersinks

01197

HSS

75°

Z=3

75°

75° Ø mm

cod.

cad/each

€

6,3 8,3 10,4 12,4 13,4 16,5 20,5 25

5 6 6 8 8 10 10 10

45 50 50 56 56 63 67 71

011970630 011970830 011971040 011971240 011971340 011971650 011972050 011972500

22,247 24,926 29,013 30,768 37,785 37,785 54,917 79,619

Applicazioni Applications

Acciaio Steel

Metalli Metals

01186 60°

Z=3

HSS

60°

DIN 334/C 60° Ø mm

cod.

cad/each

€

6,3 8 10 12,5 16 20 25 31,5

5 6 6 8 10 10 10 12

45 50 53 56 63 67 71 76

011860630 011860800 011861000 011861250 011861600 011862000 011862500 011863150

16,565 20,392 22,551 29,988 29,988 40,916 61,787 85,370

Applicazioni Applications

Acciaio Steel

Metalli Metals

231

SVASATORI MANUALI Hand countersinks

01187

HSS

90°

Z=3

90°

DIN 335/C-90° Ø mm

cod.

cad/each

6,3 8,3 10,4 12,4 16,5 20,5

121 122 124 126 130 130

011870630 011870830 011871040 011871240 011871650 011872050

24,398 27,480 30,395 34,223 43,121 53,883

cod.

cad/each

19001000

16,624

Manico Handle

ØxL 33x120

€

Art. 01191 Self Disponibile su richiesta On demand

Magnetico Magnetic

01190 40°

Z=6

40°

HSS

Gr.

Ø min-max

cod.

cad/each

€

10 ÷ 34

155

0119001

88,660

Z=6

Speciale per sbavare condutture elettriche, tubi in rame o tubi in generale e grossi fori.

SBAVATORI DEBURRES

uick and effective deburring of electrical conduit, copper pipe or any tubes or large holes.

232

233

PUNTA FRESA IN HSS-CO PER RIMUOVERE PUNTI DI SALDATURA E PER FORARE LAMIERE IN GENERE HSS-CO spot drills

01169

TiN

HSS-CO

Confezione Packaging

~DIN 1412/E DIN 1897

01171

HSS-CO

Packaging

234

Ø mm

cod.

cad/each

€

6 7 8 10

66 74 79 89

011690600 011690700 011690800 011691000

21,143 25,106 27,745 34,399

Ø mm

cod.

cad/each

6 7 8 10

66 74 79 89

011710600 011710700 011710800 011711000

14,642 16,461 17,415 22,173

DIN 1897

Confezione

~DIN 1412/E DIN 1897

DIN 1897

€

PUNTA FRESA IN HSS-CO PER RIMUOVERE PUNTI DI SALDATURA CON MACCHINE PNEUMATICHE Milling drill for removing spot welds with pneumatic tools

01179

TiAlN

~DIN 1412/E

Ø mm

cod.

cad/each

€

6,5 8 10

8 8 8

40 40 44

011790650 011790800 011791000

125,567 125,567 154,502

Velocità consigliata 10.000 giri/min Recommended speed 10.000 rpm

01173

HSS-CO

~DIN 1412/E

TiN Ø mm

cod.

cad/each

€

6,5 6,5 8 8

6,5 8 8 8

40 44 40 44

011730650 011730650V 011730800 011730800V

19,944 19,944 23,323 23,323

Velocità consigliata 3.000 giri/min Recommended speed 3.000 rpm

01172

~DIN 1412/E

HSS-CO Ø mm

cod.

cad/each

€

6,5 6,5 8 8

6,5 8 8 8

40 44 40 44

011720650 011720650V 011720800 011720800V

16,167 16,167 18,426 18,426

Velocità consigliata 3.000 giri/min Recommended speed 3.000 rpm

Speciale per taglio di acciai molto duri con carico di resistenza fino a 1500N/mm2; grande rendimento grazie all’accoppiamento metallo duro rivestimento TiAlN multistrato. Specially designed for cutting very hard metal sheets up to 1500N/mm2 tensile strenght; great performances due to the combination of solid carbide and TiAlN multilayer coating.

235

FRESA PER RIMUOVERE I PUNTI DI SALDATURA SU LAMIERE METALLICHE

MiIling cutter for removing spot welds from metal sheets

01174

HSS Ø mm

cod.

cad/each

01174100

14,068

Ricambi Spare parts

cod.

€

€ cad/each

7,197

01174101 01174102

0,848

PUNTA FRESA UNIVERSALE PER LA FORATURA E FRESATURA DI LAMIERE E MATERIALI SOTTILI IN LEGNO E PLASTICA

niversal milling drill for cutting and milling metal sheets and thin wooden or plastic materials

01175

HSS Confezione Packaging

Applicazioni Applications

Metalli Metals

236

€

ØxL

cod.

cad/each

6x90

011750600

6,779

PUNTE PER TRACCIARE CON RIPORTO IN METALLO DURO Carbide scribers

0314201

0314202

MD €

cod.

cad/each

200

0314201

7,364

cod.

cad/each

150

0314202

5,823

cod.

cad/each

4100101

3,650

MD €

PUNTERUOLO Punch

41001

C.V. €

237

238

UTENSILI A FILETTARE: MASCHI A MACCHINA THREADING TOOLS: MACHINE TAPS

239

VISIONE D'INSIEME: MASCHI A MACCHINA

NORMA

INOX

STAINLESS STEEL

STEEL <1200 N/mm

ACCIAO <900 N/mm

STEEL < 00 N/mm

ACCIAO <700 N/mm

OTTONE

BRASS

ALLUMINIO E LEGHE

R≤N/mm²

COD.

1300

10400

244

TiAlN

12÷24

376/B

1300

10401

244

TiAlN

35°

3÷10

371/C-35°

1300

10404

245

TiAlN

35°

12÷24

376/C-35°

1300

10405

245

TiN

3÷10

371/B

1200

10350

246

TiN

12÷23

376/B

1200

10351

246

TiN

35°

3÷10

371/C-35°

1200

10354

247

TiN

35°

12÷24

376/C-35°

1200

10355

247

TiN

2÷10 12÷20

371/B 376/B

1200

10362

248

TiN

40°

2÷10

371/C-40°

1200

10363

248

3÷10 12÷20

371/B 376/B

850

10515

249

UNIVERSALE UNIVERSAL

240

N ALL

IMAGE

FORO PASSANTE/CIECO

THREAD

COATING

/ALLO S

HIOLE DIAMETER

AO < 00 N/mm

DIAMETRO FORO

40°

3÷10 12÷20

371/C-40° 376/C-40°

850

10516

250

3÷10

371/B

850

10504

251

12÷20

376/B

850

10505

251

3÷10

371C-40°

850

10506

252

12÷20

376C-40°

850

10507

252

3÷10

371/B

1200

10500

253

12÷20

376/B

1200

10501

253

3÷10

371C-40°

1200

10502

254

40°

INOX STAINLESS STEEL

CO N A NE L LO CO LO RATO

HSS Co

N/mm

FEATURES

SPECIALITÀ

371/B

IMMAGINE

SPIRAL

3÷10

STANDARD

SPIRALE

BLIND OR TROUGHT HOLES

FILETTATURA

TiAlN

RIVESTIMENTO

MATERIAL

MATERIALE

Overview: machine taps

ACCIAI DURI HIGHSTRENGTH STEEL

40°

12÷20

376C-40°

1200

10503

254

4÷10

371/A

1200

10510

255

40°

3÷10

371/C-40°

850

10511

256

40°

12÷16

376/C-40°

850

10512

256

3÷10

371/C

850

10508

257

12÷20

376/C

850

10509

257

3÷10

371/C

850

10513

258

12÷16

376/C

850

10514

258

ALLUMINIO ALUMINIUM

GHISA CAST IRON

OTTONE BRASS

ACCIAO <700 N/mm

OTTONE

BRASS

ALLUMINIO E LEGHE

R≤N/mm²

COD.

900

10297

259

VAPO

12÷20

376/B

900

10298

259

VAPO

35°

3÷10

371/C-35°

900

10299

260

VAPO

35°

12÷20

376/C-35°

900

10300

260

1÷10

371/B

850

10250

261

3÷68

376/B

850

10253

261

3÷10

371/C

850

10251

262

3÷42

376/C

850

10254

262

15°

3÷10

371/C-15°

850

10256

263

15°

3÷24

376/C-15°

850

10258

263

35°

3÷10

371/C-35°

850

10255

264

35°

3÷42

376/C-35°

850

10257

264

3÷12

371/B

850

10291

265

35°

3÷12

371/C-35°

850

10292

265

CON CANALINE INTERNAL COOLING

3÷10

371/C

1300

10340

266

40°

CON CANALINE INTERNAL COOLING

5÷10

371/C-40°

850

10330

266

3÷10

371/B

850

10261

267

12÷30

376/B

850

10262

267

3÷10

371/B

850

10277

268

12÷30

376/B

850

10278

268

3÷10

371/C

850

10263

269

12÷24

376/C

850

10264

269

N ALL

IA A

INOX

IMAGE

FORO PASSANTE/CIECO

THREAD

COATING

/ALLO S

STEEL < 00 N/mm

AO < 00 N/mm

ACCIAO <900 N/mm

N/mm

NORMA

STEEL <1200 N/mm

HIOLE DIAMETER

STAINLESS STEEL

DIAMETRO FORO

IMMAGINE

FEATURES

371/B

STANDARD

SPECIALITÀ

3÷10

BLIND OR TROUGHT HOLES

FILETTATURA

SPIRAL

HSS Co

SPIRALE

RIVESTIMENTO

MATERIAL

MATERIALE

HSS Co

VAPO

LUNGHI LONG

ALTERNATI INTERRUPTED THREADS

SINISTRI LEFT HAND

35°

3÷10

371/C-35°

850

10279

270

35°

12÷30

376/C-35°

850

10288

270

3÷16

2174

850

10280

271

3÷16

2174

1200

10360

271

3÷16

2174

850

10281

272

3÷16

2174

1200

10361

272

TiN

A RULLARE PER LAMIERE COLD FORMING FOR SHEETS

241

VISIONE D'INSIEME: MASCHI A MACCHINA

COD.

10310

273

3÷10

371/C-35°

850

10313

273

3÷10 12

371/B 376/B

850

10311

274

850

10314

274

371/B 376/B

N ALL

850

10312

275

850

10315

275

850

10273

276

850

10290

276

850

10259

277

374/C

850

10252

278

3÷42

374/C-35°

850

10260

279

4÷52

374/B

850

10286

280

4÷52

374/C-35°

850

10287

281

35°

PER DADI FOR NUTS

3÷24

357

PUNTA MASCHIO COMBINED

3÷12

357

3÷42

374/B

4÷42

35°

INOX

IMAGE

NORMA

HIOLE DIAMETER

3÷10 12 371/C-35° 376/C-35°

/ALLO S

850

AO < 00 N/mm

SOVRADIM. +0,1mm OVERSIZE +0,1 mm

N/mm

STEEL <1200 N/mm

STAINLESS STEEL

IMMAGINE

STANDARD

371/B 376/B

HSS Co

3÷10 12

DIAMETRO FORO

FEATURES

R≤N/mm²

35°

ALLUMINIO E LEGHE

SOVRADIM. 7g OVERSIZE 7g

BRASS

OTTONE

35°

ACCIAO <700 N/mm

SOVRADIM. 6g OVERSIZE 6g

STEEL < 00 N/mm

ACCIAO <900 N/mm

SPECIALITÀ

SPIRAL

SPIRALE

BLIND OR TROUGHT HOLES

FORO PASSANTE/CIECO

THREAD

FILETTATURA

COATING

RIVESTIMENTO

MATERIAL

MATERIALE

Overview: machine taps

3÷10 12

3÷10 12 371/C-35° 376/C-35°

35°

1"÷2"

5156/B

850

10268

282

1/8÷2"

5156/C

850

10276

282

35°

1"÷2"

5156C-35°

850

10267

283

SINISTRI LEFT HAND

1/8÷1"

5156/C

850

10289

283

CONICO 1:16 TAPER 1:16

1/8÷1"

850

10294

284

1/8÷3/8

371/B

850

10265

285

7/16÷ 1.1/2

376/B

850

10266

285

35°

1/8÷3/8

371C-35°

850

10274

286

35°

7/16÷ 1.1/2

376C-35°

850

10275

286

CONICO 1:16 TAPER 1:16

1/8÷1"

850

10293

287

1/19÷1"

850

10308

288

1/16÷1"

850

10309

288

1/16÷1"

850

10306

289

1/8÷1"

850

10307

289

SINISTRI LEFT HAND

BSP

BSPT

BSW

NPT

NPS

35°

NPTF

242

35°

CORTI SHORT

CONICO 1:16 TAPER 1:16

ACCIAO <700 N/mm

OTTONE

BRASS

ALLUMINIO E LEGHE

R≤N/mm²

COD.

6÷3/8

ANSI B1.1

850

10269

291

7/16÷ 1.1/2

ANSI B1.1

850

10270

291

35°

6÷3/8

ANSI B1.1

850

10271

292

35°

7/16÷ 1.1/2

ANSI B1.1

850

10272

292

6÷3/8

ANSI B1.1

850

10282

293

7/16÷ 1.1/2

ANSI B1.1

850

10283

293

35°

6÷3/8

ANSI B1.1

850

10284

294

35°

7/16÷ 1.1/2

ANSI B1.1

850

10285

294

1/4÷2"

529

850

10305

295

3÷10

371/B

700

10162

296

3÷42

376/B

700

10165

296

2÷10

371/C

700

10168

297

3÷42

376/C

700

10171

297

15°

3÷10

371/C-15°

700

10174

298

15°

3÷24

376/C-15°

700

10177

298

35°

2÷10

371/C-35°

700

10183

299

35°

3÷42

376/C-35°

700

10180

299

2÷12

529/B

700

10172

300

35°

2,5÷12

529/C-35°

700

10173

300

HSS-G

UNEF

CORTI SHORT

N ALL

IA A

INOX

IMAGE

NORMA

HIOLE DIAMETER

FORO PASSANTE/CIECO

THREAD

UNF

/ALLO S

STEEL < 00 N/mm

AO < 00 N/mm

ACCIAO <900 N/mm

290

UNC

HSS Co

N/mm

10301

STEEL <1200 N/mm

850

STAINLESS STEEL

IMMAGINE

STANDARD

SPECIALITÀ

DIAMETRO FORO

SPIRAL

FEATURES

SPIRALE

8-UN

BLIND OR TROUGHT HOLES

529-2B

FILETTATURA

1.1/8÷ 2.1/2

COATING

RIVESTIMENTO

MATERIAL

MATERIALE

3÷10

1200

10230

301

UTENSILE COMBINATO ATTACCO 1/4" C M NED / SHANK

3÷10

600

10212

301

ATTACCO 1/4" 1/4 S AN

3÷10

700

10210

302

TiN

15°

4÷24

374/C-15°

700

10198

302

BSP

15°

1/8÷1"

374/C-15°

700

10204

303

BSPT

700

10139

303

NPT

700

10134

303

CONICO 1:16 TAPER 1:16

1"÷2" 1"÷2"

ANSI B2.1

243

MASCHI A MACCHINA AL COBALTO RIVESTITI AL TiAlN, FILETTATURA METRICA ISO A PASSO GROSSO HSS-CO TiAlN coated machine taps

10400

HSS-CO

DIN 371/B

TiAlN

HSS-CO+TiAlN HV 0,05=3000 T° Max.: 800°C

FORM B

M €

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

11 13 16 19 22 24

56 63 70 80 90 100

3,5 4,5 6 6 8 10

1 1 1 1 1 1

1040003X05 1040004X07 1040005X08 1040006X1 1040008X125 1040010X15

32,439 32,439 32,439 34,552 40,901 44,317

4-5 Filetti Threads Art. 10450300

€ 251,026 7 pcs M 3÷12

R ≤ 1400 N/mm2

Applicazioni Applications

Acciaio Steel

Inox Stainless

INOX

Metalli Metals

10401

Olio Oil

Alluminio Aluminum Alu

HSS-CO

HSS-CO+TiAlN HV 0,05=3000 T° Max.: 800°C

FORM B 4-5 Filetti Threads

R ≤ 1400 N/mm2

Applicazioni Applications

INOX

244

Acciaio Steel

Inox Stainless

Metalli Metals

DIN 376/B

TiAlN

Alluminio Aluminum Alu

Olio Oil

M €

pcs

cod.

cad/each

12 x 1,75 14 x 2 16 x 2 18 x 2,5 20 x 2,5 22 x 2,5 24 x 3

29 30 30 34 34 34 38

110 110 110 125 140 140 160

9 11 12 14 16 18 18

1 1 1 1 1 1 1

1040112X175 1040114X2 1040116X2 1040118X25 1040120X25 1040122X25 1040124X3

58,346 74,527 83,927 100,134 122,690 138,205 160,763

MASCHI A MACCHINA AL COBALTO RIVESTITI AL TiAlN, FILETTATURA METRICA ISO A PASSO GROSSO HSS-CO TiAlN coated machine taps

10404

HSS-CO

DIN 371/C-35°

TiAlN

HSS-CO+TiAlN HV 0,05=3000 T° Max.: 800°C

FORM C

M €

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

6 7 8 10 14 16

56 63 70 80 90 100

3,5 4,5 6 6 8 10

1 1 1 1 1 1

1040403X05 1040404X07 1040405X08 1040406X1 1040408X125 1040410X15

38,776 38,776 40,329 41,045 50,771 55,634

2-3 Filetti Threads

Art. 10450305

€ 280,635 7 pcs M 3÷12

R ≤ 1400 N/mm2

Applicazioni Applications

Acciaio Steel

Inox Stainless

INOX

Metalli Metals

10405

Olio Oil

Alluminio Aluminum Alu

HSS-CO

DIN 376/C-35°

TiAlN

HSS-CO+TiAlN HV 0,05=3000 T° Max.: 800°C

FORM C 2-3 Filetti Threads

M €

pcs

cod.

cad/each

12 x 1,75 14 x 2 16 x 2 18 x 2,5 20 x 2,5 22 x 2,5 24 x 3

18 20 22 25 25 25 30

110 110 110 125 140 140 160

9 11 12 14 16 18 18

1 1 1 1 1 1 1

1040512X175 1040514X2 1040516X2 1040518X25 1040520X25 1040522X25 1040524X3

69,912 87,565 98,661 117,266 142,430 160,763 184,738

R ≤ 1400 N/mm2

Applicazioni Applications

INOX

Acciaio Steel

Inox Stainless

Metalli Metals

Olio Oil

Alluminio Aluminum Alu

245

MASCHI A MACCHINA AL COBALTO RIVESTITI AL TiN, FILETTATURA METRICA ISO A PASSO GROSSO HSS-CO TiN coated machine taps, metric thread

10350

HSS-CO

TiN

DIN 371/B

HSS-CO+TiN HV 0,05=2500 FORM B 4-5 Filetti Threads

€

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

11 13 16 19 22 24

56 63 70 80 90 100

3,5 4,5 6 6 8 10

1 1 1 1 1 1

1035003X05 1035004X07 1035005X08 1035006X1 1035008X125 1035010X15

29,609 26,508 29,401 30,560 39,115 42,376

Alto rendimento nella filettatura in acciai ad elevata resistenza sino a R≤1200 N/mm2, quali acciai da bonifica alto legati, acciai inox, acciai resistenti agli acidi, acciai refrattari. Temperatura max. di lavoro 550°. High performances in high strength steel R≤1200 N/mm2, stainless steel, acid resistant steel, high alloy construction steel. R ≤ 1200 N/mm2

Applicazioni

Art. 10390300

Applications

€ 218,587

INOX

Metalli Metals

10351

Olio Oil

Acciaio Steel

Inox Stainless

7 pcs M 3÷12

Alluminio Aluminum Alu

HSS-CO

TiN

DIN 376/B

HSS-CO+TiN HV 0,05=2500 FORM B 4-5 Filetti Threads

€

pcs

cod.

cad/each

12 x 1,75 14 x 2 16 x 2 18 x 2,5 20 x 2,5 22 x 2,5 24 x 3

29 30 30 34 34 34 38

110 110 110 125 140 140 160

9 11 12 14 16 18 18

1 1 1 1 1 1 1

1035112X175 1035114X2 1035116X2 1035118X25 1035120X25 1035122X25 1035124X3

50,693 64,462 73,157 89,377 106,914 117,043 141,023

Applicazioni Applications

INOX

Metalli Metals

246

Acciaio Steel

Inox Stainless

Alluminio Aluminum Alu

Olio Oil

MASCHI A MACCHINA AL COBALTO RIVESTITI AL TiN, FILETTATURA METRICA ISO A PASSO GROSSO HSS-CO TiN coated machine taps, metric thread

10354

HSS-CO

TiN

DIN 371/C - 35°

HSS-CO+TiN

FORM C 2-3 Filetti Threads

€

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

6 7 8 10 14 16

56 63 70 80 90 100

3,5 4,5 6 6 8 10

1 1 1 1 1 1

1035403X05 1035404X07 1035405X08 1035406X1 1035408X125 1035410X15

35,047 35,047 33,378 34,512 44,930 50,001

Applicazioni

Art. 10390305

Applications

€ 253,841

INOX

Metalli Metals

10355

Olio Oil

Acciaio Steel

Inox Stainless

7 pcs M 3÷12

Alluminio Aluminum Alu

HSS-CO

TiN

DIN 376/C - 35°

HSS-CO+TiN

FORM C 2-3 Filetti Threads

€

pcs

cod.

cad/each

12 x 1,75 14 x 2 16 x 2 18 x 2,5 20 x 2,5 22 x 2,5 24 x 3

18 20 22 25 25 25 30

110 110 110 125 140 140 160

9 11 12 14 16 18 18

1 1 1 1 1 1 1

1035512X175 1035514X2 1035516X2 1035518X25 1035520X25 1035522X25 1035524X3

61,227 76,105 86,274 104,761 124,386 143,837 160,763

Applicazioni Applications

INOX

Acciaio Steel

Inox Stainless

Metalli Metals

Olio Oil

Alluminio Aluminum Alu

247

OWDER ETALL R

SUPER POWER TAPS METALLURGIA DELLE POLVERI

MASCHI A MACCHINA AL COBALTO CON ANELLO VERDE UNIVERSALI, FILETTATURA METRICA ISO A PASSO GROSSO Universal machine taps, metric thread

10362

HSS-CO

TiN

HSS-CO (PM) + TiN HV 0,05=2500

FORM B

DIN 371/B ISO 2/6H Ø l

pcs

cod.

cad/each

2 x 0,4 3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

45 56 63 70 80 90 100

2,8 3,5 4,5 6 6 8 10

1 1 1 1 1 1 1

1036202X04 1036203X05 1036204X07 1036205X08 1036206X1 1036208X125 1036210X15

31,629 39,380 39,380 40,322 48,123 53,883 71,007

8 11 13 16 19 22 24

€

4-5 Filetti Threads

Art. 10390320

€ 398,841 7 pcs M 3÷12

R ≤ 1200 N/mm2

Applicazioni Applications

M Acciaio Steel

Inox Stainless

INOX

Alluminio Aluminum

Metalli Metals

DIN 376/B ISO 2/6H Ø l

pcs

cod.

cad/each

12 x 1,75 14 x 2 16 x 2 18 x 2,5 20 x 2,5

110 110 110 125 140

9 11 12 14 16

1 1 1 1 1

1036212X175 1036214X2 1036216X2 1036218X25 1036220X25

84,726 128,296 128,296 208,517 215,324

18 20 22 25 25

€

Alu

Olio Oil

≤3Ø

Metallurgia delle polveri L’acciaio superrapido, derivato dal processo di metallurgia delle polveri, offre prestazioni eccezionali: presenta una elevata durezza a caldo e una elevata tenacità, garantita dall’alto contenuto di elementi di lega e dalla microstruttura fortemente omogenea. li utensili prodotti con la metallurgia delle polveri (Powder Metallurgy) hanno una durata più elevata ed un rendimento più alto, oltre che una finitura superficiale ottima, che agevola lo scorrimento dei trucioli di lavorazione lontano dalla zona di taglio. Powder metallurgy HSS made by powder metallurgy has excellent performances: its homogeneous structure assures high toughness and high resistance. The finishing of the tools are really smooth, so the chip can easily be evacuated far from the cutting zone, thus avoiding built-up edge growth.

10363

HSS-CO

TiN

DIN 371/C-40° ISO 2/6H

HSS-CO + TiN

FORM C 2-3 Filetti Threads

R ≤ 1200 N/mm2

Applications

INOX

Metalli Metals

248

Acciaio Steel

Inox Stainless

Alluminio Aluminum Alu

Olio Oil

€

pcs

cod.

cad/each

2 x 0,4 3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

6 6 7 8 10 14 16

45 56 63 70 80 90 100

2,8 3,5 4,5 6 6 8 10

1 1 1 1 1 1 1

1036302X04 1036303X05 1036304X07 1036305X08 1036306X1 1036308X125 1036310X15

29,324 33,932 36,183 36,655 45,818 49,327 63,048

≤3Ø

Applicazioni

MASCHI A MACCHINA AL COBALTO CON ANELLO VERDE, FILETTATURA METRICA ISO A PASSO GROSSO Universal machine taps, metric thread HSS-CO

VAPO

DIN 371/B ISO 2/6H

HSS-CO HV 820÷850

FORM B

VAPO Ø

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

11 13 16 19 22 24

56 63 70 80 90 100

3,5 4,5 6,0 6,0 8,0 10,0

1 1 1 1 1 1

1051503X05 1051504X07 1051505X08 1051506X1 1051508X125 1051510X15

23,838 24,234 24,234 24,678 28,586 34,173

4-5 Filetti Threads

€

Art. 10520307

€ 230,182 7 pcs M 3÷12

R ≤ 900 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

HSS-CO

VAPO

DIN 376/B ISO 2/6H

HSS-CO HV 820÷850

M €

pcs

cod.

cad/each

12 x 1,75 14 x 2 16 x 2 20 x 2,5

29 30 30 34

110 110 110 140

9,0 11,0 12,0 16,0

1 1 1 1

1051512X175 1051514X2 1051516X2 1051520X25

43,273 63,846 63,846 101,680

FORM B 4-5 Filetti Threads

Finitura: ssidazione in vapore di Fe3 4 che aumenta la durezza superficiale e la resistenza a usura riducendo la tendenza all’incollamento dei trucioli.

R ≤ 900 N/mm2

Finish: Steam Tempered of Fe3 O4 , increasing surface hardness and wear resistance.

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

I maschi con anello verde hanno un alto rendimento nella filettatura di acciai con resistenza R 900 N/mm2, materiali mediamente abrasivi, alluminio e sue leghe, acciai in genere e ghise. Il trattamento superficiale di vaporizzazione aumenta la durezza superficiale e la resistenza a usura del maschio. Green ring machine taps are useful when threading steel with R 900 N/mm2, light abrasive materials, aluminium and its alloys, general steels and cast iron. The steam tempering of the tap increases hardness and wear resistance.

249

UNIVERSAL

10515

MASCHI A MACCHINA AL COBALTO CON ANELLO VERDE, FILETTATURA METRICA ISO A PASSO GROSSO Universal machine taps, metric thread

10516

HSS-CO

VAPO

HSS-CO

UNIVERSAL

HV 820÷850

FORM C

DIN 371/C-40° ISO 2/6H

M €

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

6 7 8 10 14 16

56 63 70 80 90 100

3,5 4,5 6,0 6,0 8,0 10,0

1 1 1 1 1 1

1051603X05 1051604X07 1051605X08 1051606X1 1051608X125 1051610X15

25,123 25,123 26,409 27,250 32,047 36,795

2-3 Filetti Threads ≤3Ø

R ≤ 900 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Alluminio Aluminum

Olio Oil

Alu

HSS-CO

VAPO

DIN 376/C-40° ISO 2/6H

Ø M

HSS-CO HV 820÷850

12 x 1,75 16 x 2 20 x 2,5

M €

pcs

cod.

cad/each

18,5 20 25

110 110 140

9,0 12,0 16,0

1 1 1

1051612X175 1051616X2 1051620X25

41,987 61,720 93,077

FORM C 2-3 Filetti Threads

≤3Ø Finitura: ssidazione in vapore di Fe3 4 che aumenta la durezza superficiale e la resistenza a usura riducendo la tendenza all’incollamento dei trucioli. Finish: Steam Tempered of Fe3 O4 , increasing surface hardness and wear resistance.

R ≤ 900 N/mm2

Applicazioni Applications

INOX

Alu

Inox Stainless

Acciaio Steel

Alluminio Aluminum

Olio Oil

250

White ring machine taps, metric thread

10504

HSS-CO

VAPO

DIN 371/B

HSS-CO AISI M35 HV 820÷850

FORM B

M €

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

11 13 16 19 22 24

56 63 70 80 90 100

3,5 4,5 6,0 6,0 8,0 10,0

1 1 1 1 1 1

1050403X05 1050404X07 1050405X08 1050406X1 1050408X125 1050410X15

25,716 25,716 27,662 27,662 31,871 38,577

4-5 Filetti Threads

Art. 10520300

€ 203,075 7 pcs M 3÷12

R ≤ 1000 N/mm2

Applicazioni Applications

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

10505

HSS-CO

INOX

VAPO

DIN 376/B

HSS-CO AISI M35 HV 820÷850

FORM B 4-5 Filetti Threads

M €

pcs

cod.

cad/each

12 x 1,75 14 x 2 16 x 2 18 x 2,5 20 x 2,5

29 30 30 34 34

110 110 110 125 140

9,0 11,0 12,0 14,0 16,0

1 1 1 1 1

1050512X175 1050514X2 1050516X2 1050518X25 1050520X25

46,397 59,532 67,628 111,353 155,628

R ≤ 1000 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

Per filettature in acciaio inox, acciai per utensili, acciai resistenti al calore, acciai legati in genere, bronzo a truciolo lungo, rame con R≤1000 N/mm2 For making threads in stainless steel, heat resistant steel, structural steel, long chipping bronze, copper with R≤1000 N/mm2

Finitura: ssidazione in vapore di Fe3 4 che aumenta la durezza superficiale e la resistenza a usura riducendo la tendenza all’incollamento dei trucioli. Finish: Steam Tempered of Fe3 O4 , increasing surface hardness and wear resistance.

251

SPECIALE PER ACCIAIO INOX SPECIAL FOR STAINLESS STEEL

MASCHI A MACCHINA AL COBALTO CON ANELLO BIANCO, FILETTATURA METRICA ISO A PASSO GROSSO

SPECIALE PER ACCIAIO INOX SPECIAL FOR STAINLESS STEEL

MASCHI A MACCHINA AL COBALTO CON ANELLO BIANCO, FILETTATURA METRICA ISO A PASSO GROSSO White ring machine taps, metric thread

10506

HSS-CO

VAPO

DIN 371/C-40°

HSS-CO AISI M35 HV 820÷850

FORM C

M €

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

6 7 8 10 14 16

56 63 70 80 90 100

3,5 4,5 6,0 6,0 8,0 10,0

1 1 1 1 1 1

1050603X05 1050604X07 1050605X08 1050606X1 1050608X125 1050610X15

32,784 32,784 35,110 34,763 40,675 48,521

2-3 Filetti Threads

Art. 10520301

€ 251,304 7 pcs M 3÷12

R ≤ 1000 N/mm2

Applicazioni Applications

Acciaio Steel

Inox Stainless

INOX

Metalli Metals

10507

Olio Oil

Alluminio Aluminum Alu

HSS-CO

VAPO

DIN 376/C-40°

HSS-CO AISI M35 HV 820÷850

M €

pcs

cod.

cad/each

12 x 1,75 14 x 2 16 x 2 18 x 2,5 20 x 2,5

18 20 22 25 25

110 110 110 125 140

9,0 11,0 12,0 14,0 16,0

1 1 1 1 1

1050712X175 1050714X2 1050716X2 1050718X25 1050720X25

63,125 79,990 97,334 146,202 202,080

FORM C 2-3 Filetti Threads

R ≤ 1000 N/mm2

Per filettature in acciaio inox, acciai per utensili, acciai resistenti al calore, acciai legati in genere, bronzo a truciolo lungo, rame con R≤1000 N/mm2

Applicazioni Applications

INOX

Acciaio Steel

Inox Stainless

Metalli Metals

Olio Oil

For making threads in stainless steel, heat resistant steel, structural steel, long chipping bronze, copper with R≤1000 N/mm2

Alluminio Aluminum Alu

Blue ring machine taps, metric thread

10500

HSS-CO

DIN 371/B

HSS-CO AISI M35 HV 850÷880

FORM B

€

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

11 13 16 19 22 24

56 63 70 80 90 100

3,5 4,5 6,0 6,0 8,0 10,0

1 1 1 1 1 1

1050003X05 1050004X07 1050005X08 1050006X1 1050008X125 1050010X15

24,080 24,080 26,263 26,263 30,615 36,095

4-5 Filetti Threads

Art. 10520302

€ 196,529 7 pcs M 3÷12

R ≤ 1200 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

10501

HSS-CO

DIN 376/B

HSS-CO AISI M35 HV 850÷880

€

pcs

cod.

cad/each

12 x 1,75 14 x 2 16 x 2 18 x 2,5 20 x 2,5

29 30 30 34 34

110 110 110 125 140

9 11 12 14 16

1 1 1 1 1

1050112X175 1050114X2 1050116X2 1050118X25 1050120X25

41,915 59,390 66,875 104,538 145,961

FORM B 4-5 Filetti Threads

R ≤ 1200 N/mm2

Per filettatura in acciai resistenti all’usura quali gli acciai refrattari, acciai legati da tempra e cementazione, acciai per utensili con R≤1200 N/mm2.

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

For use in wear resistant steel, heat resistant steel, tool steel with R≤1200 N/mm2.

253

SPECIALI PER ACCIAI REFRATTARI, ACCIAI DA TEMPRA E CEMENTAZIONE SPECIAL FOR WEAR AND HEAT RESISTANT STEEL

MASCHI A MACCHINA AL COBALTO CON ANELLO BLU, FILETTATURA METRICA ISO

SPECIALI PER ACCIAI REFRATTARI, ACCIAI DA TEMPRA E CEMENTAZIONE SPECIAL FOR WEAR AND HEAT RESISTANT STEEL

MASCHI A MACCHINA AL COBALTO CON ANELLO BLU, FILETTATURA METRICA ISO Blue ring machine taps, metric thread

10502

HSS-CO

DIN 371/C-40°

HSS-CO AISI M35 HV 850÷880

FORM C

M €

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

6 7 8 10 14 16

56 63 70 80 90 100

3,5 4,5 6,0 6,0 8,0 10,0

1 1 1 1 1 1

1050203X05 1050204X07 1050205X08 1050206X1 1050208X125 1050210X15

30,580 30,580 33,948 35,345 38,605 45,049

2-3 Filetti Threads

Art. 10520303

€ 244,825 7 pcs M 3÷12

R ≤ 1200 N/mm2

Applicazioni Applications

Acciaio Steel

Inox Stainless

INOX

Metalli Metals

10503

Olio Oil

Alluminio Aluminum Alu

HSS-CO

DIN 376/C-40°

HSS-CO AISI M35 HV 850÷880

M €

pcs

cod.

cad/each

12 x 1,75 14 x 2 16 x 2 18 x 2,5 20 x 2,5

18 20 22 25 25

110 110 110 125 140

9 11 12 14 16

1 1 1 1 1

1050312X175 1050314X2 1050316X2 1050318X25 1050320X25

53,955 68,341 83,150 114,882 164,180

FORM C 2-3 Filetti Threads

R ≤ 1200 N/mm2

Applicazioni Applications

INOX

Acciaio Steel

Inox Stainless

Metalli Metals

Olio Oil

Alluminio Aluminum Alu

Per filettatura in acciai resistenti all’usura quali gli acciai refrattari, acciai legati da tempra e cementazione, acciai per utensili con R≤1000 N/mm2. For use in wear resistant steel, heat resistant steel, tool steel with R≤1000 N/mm2.

254

Red ring machine taps, metric thread

10510

HSS-CO

DIN 371/A

HSS-CO AISI M35 HV 820÷850

FORM A

€

pcs

cod.

cad/each

4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

9 11 12 15 16

63 70 80 90 100

4,5 6 6 8 10

1 1 1 1 1

1051004X07 1051005X08 1051006X1 1051008X125 1051010X15

29,536 32,810 32,810 36,095 42,655

5-6 Filetti Threads

Art. 10520310

€ 164,492 5 pcs M 4÷10

R ≤ 1200 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

Per filettatura in acciai resistenti all’usura quali gli acciai refrattari, acciai legati da tempra e cementazione, acciai per utensili con R ≤ 1200 N/mm2. Imbocco F RM A. For use in wear resistant steel, heat resistant steel, tool steel with R ≤ 1200 N/mm2. FORM A.

255

SPECIALI PER ACCIAI REFRATTARI, ACCIAI DA TEMPRA E CEMENTAZIONE SPECIAL FOR WEAR AND HEAT RESISTANT STEEL

MASCHI A MACCHINA AL COBALTO CON ANELLO ROSSO, FILETTATURA METRICA ISO

SPECIALI PER ALLUMINIO SPECIAL FOR ALUMINIUM

MASCHI A MACCHINA AL COBALTO CON ANELLO GIALLO, FILETTATURA METRICA ISO Yellow ring machine taps, metric thread

10511

HSS-CO

DIN 371/C-40°

HSS-CO AISI M35 HV 820÷850

2 SPIRALI 2 FLUTES

M €

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

6 7 8 10 14 16

56 63 70 80 90 100

3,5 4,5 6 6 8 10

1 1 1 1 1 1

1051103x05 1051104x07 1051105x08 1051106x1 1051108x125 1051110x15

39,509 39,509 42,748 42,748 49,120 59,506

2-3 Filetti Threads

Art. 10520305

€ 269,071 7 pcs M 3÷12

R ≤ 850 N/mm2

Applicazioni Applications

Alluminio Aluminum

Alu

Truciolo lungo Long chip

10512

HSS-CO AISI M35 HV 820÷850

2 SPIRALI 2 FLUTES

2-3 Filetti Threads

R ≤ 850 N/mm2

Applicazioni Applications

Alu

Alluminio Aluminum

Truciolo lungo Long chip

256

HSS-CO

DIN 376/C-40°

M €

pcs

cod.

cad/each

12 x 1,75 14 x 2 16 x 2

18 20 22

110 110 110

9 11 12

1 1 1

1051212X175 1051214X2 1051216X2

79,859 104,607 118,779

Black ring machine taps, metric thread

10508

HSS-CO

DIN 371/C

HSS-CO AISI M35 HV 820÷850

FORM C

€

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

11 13 16 19 22 24

56 63 70 80 90 100

3,5 4,5 6 6 8 10

1 1 1 1 1 1

1050803X05 1050804X07 1050805X08 1050806X1 1050808X125 1050810X15

21,385 21,385 23,001 23,001 26,502 32,626

2-3 Filetti Threads

Art. 10520304

€ 211,559 7 pcs M 3÷12

Applicazioni Applications

Ghisa Cast Iron

Cu Zn Ni Ms

Alu

Leghe leggere Light alloys

10509

Alluminio Aluminum

Per filettatura in fori ciechi e passanti in ghisa grigia e sferoidale, leghe di magnesio, bronzo e alluminio a truciolo corto, plastica dura.

Truciolo lungo Long chip

For making threads into through and blind holes, cast iron, magnesium alloys, bronze and short chip aluminium, hard plastics.

Plastica dura Hard plastic

HSS-CO

DIN 376/C

HSS-CO AISI M35 HV 820÷850

FORM C

€

pcs

cod.

cad/each

12 x 1,75 14 x 2 16 x 2 18 x 2,5 20 x 2,5

29 30 30 34 34

110 110 110 125 140

9 11 12 14 16

1 1 1 1 1

1050912X175 1050914X2 1050916X2 1050918X25 1050920X25

38,581 49,503 56,235 77,162 107,841

2-3 Filetti Threads

Applicazioni Applications

Ghisa Cast Iron

Cu Zn Ni Ms

Leghe leggere Light alloys

Alu

Alluminio Aluminum

Truciolo lungo Long chip

Plastica dura Hard plastic

Nitrurato / Nitrited L’arricchimento della superficie con nitrato e carbonio diminuisce la tendenza all’incollamento dei trucioli e aumenta la durezza superficiale e la resistenza ad usura. The surface enrichment with nitrate and carbon is aimed to avoiding chips sticking on the tool and to increasing surface hardness and wear resistance. 257

SPECIALI PER GHISA SPECIAL FOR CAST IRON

MASCHI A MACCHINA AL COBALTO CON ANELLO NERO, FILETTATURA METRICA ISO

SPECIALE PER OTTONE SPECIAL FOR BRASS

MASCHI A MACCHINA AL COBALTO CON ANELLO ARANCIO, FILETTATURA METRICA ISO Orange ring machine taps, metrci thread

10513

HSS-CO

DIN 371/C

HSS-CO AISI M35 HV 820÷850

FORM C

€

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

11 13 16 19 22 24

56 63 70 80 90 100

3,5 4,5 6 6 8 10

1 1 1 1 1 1

1051303x05 1051304x07 1051305x08 1051306x1 1051308x125 1051310x15

28,807 28,807 31,229 31,229 35,599 43,049

2-3 Filetti Threads

Art. 10520306

€ 232,260 5 pcs M 3÷12

R ≤ 850 N/mm2

Applicazioni Applications

Ottone Brass

10514

Truciolo corto Short chip

HSS-CO

DIN 376/C

HSS-CO AISI M35 HV 820÷850

FORM C 2-3 Filetti Threads

R ≤ 850 N/mm2

Applicazioni Applications

Ottone Brass

258

Truciolo corto Short chip

€

pcs

cod.

cad/each

12 x 1,75 14 x 2 16 x 2

29 30 30

110 110 110

9 11 12

1 1 1

1051412X175 1051414X2 1051416X2

58,072 74,264 85,103

Machine taps with coating treatment

10297

HSS-CO

VAPO

DIN 371/B

HSS-CO HV 820÷850

FORM B

M €

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

11 13 16 19 22 24

56 63 70 80 90 100

3,5 4,5 6 6 8 10

1 1 1 1 1 1

1029703X05 1029704X07 1029705X08 1029706X1 1029708X125 1029710X15

19,704 19,704 20,805 20,805 24,599 29,428

4-5 Filetti Threads

Art. 10345315

€ 186,146 7 pcs M 3÷12 R ≤ 900 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

10298

HSS-CO

VAPO

DIN 376/B

HSS-CO HV 820÷850 FORM B

M €

pcs

cod.

cad/each

12 x 1,75 14 x 2 16 x 2 18 x 2,5 20 x 2,5

29 30 30 34 34

110 110 110 125 140

9 11 12 14 16

1 1 1 1 1

1029812X175 1029814X2 1029816X2 1029818X25 1029820X25

36,841 49,981 57,935 92,020 132,961

4-5 Filetti Threads

Per acciai con R ≤ 900 N/mm2, materiali mediamente abrasivi, ghisa e metalli in genere.

R ≤ 900 N/mm2

Suitable for steel with R≤ 900 N/mm2, quite abrasive materials, cast iron, metals.

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

259

VAPORIZZATI WITH COATING TREATMENT

MASCHI A MACCHINA AL COBALTO CON TRATTAMENTO DI RIVESTIMENTO SUPERFICIALE

VAPORIZZATI WITH COATING TREATMENT

MASCHI A MACCHINA AL COBALTO CON TRATTAMENTO DI RIVESTIMENTO SUPERFICIALE Machine taps with coating treatment

10299

HSS-CO

VAPO

DIN 371/C - 35°

HSS-CO HV 820÷850 FORM C 2-3 Filetti Threads

M €

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

6 7 8 10 14 16

56 63 70 80 90 100

3,5 4,5 6 6 8 10

1 1 1 1 1 1

1029903X05 1029904X07 1029905X08 1029906X1 1029908X125 1029910X15

28,103 28,103 29,203 29,203 35,071 40,927

Art. 10345316

€ 228,455 7 pcs M 3÷12 R ≤ 900 N/mm

Applicazioni Applications

Acciaio Steel

Inox Stainless

INOX

Metalli Metals

10300

Olio Oil

Alluminio Aluminum Alu

HSS-CO

VAPO

HSS-CO HV 820÷850 FORM C

DIN 376/C - 35°

pcs

cod.

cad/each

12 x 1,75 14 x 2 16 x 2 18 x 2,5 20 x 2,5

18 20 22 25 25

110 110 110 125 140

9 11 12 14 16

1 1 1 1 1

1030012X175 1030014X2 1030016X2 1030018X25 1030020X25

50,324 64,374 69,029 108,053 141,440

2-3 Filetti Threads

Per acciai con R ≤ 900 N/mm2, materiali mediamente abrasivi, ghisa e metalli in genere.

R ≤ 900 N/mm2

Suitable for steel with R≤ 900 N/mm2, quite abrasive materials, cast iron, metals.

Applicazioni Applications

INOX

Acciaio Steel

Inox Stainless

Metalli Metals

Olio Oil

Alluminio Aluminum Alu

€

MASCHI A MACCHINA AL COBALTO, SCANALATURE DIRITTE, IMB. CORRETTO, FILETTATURA METRICA ISO PASSO GROSSO Machine taps, spiral point, metric thread

10250

HSS-CO

M MICRO MACHINE TAPS HSS-CO

HSS-CO AISI M35 HV 820÷850

FORM B 4-5 Filetti Threads

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

DIN 371/B ISO 2/6H

€

pcs

cod.

cad/each

1 x 0,25 1,1 x 0,25 1,2 x 0,25 1,4 x 0,3 1,6 x 0,35 1,7 x 0,35 1,8 x 0,35 2 x 0,4 2,5 x 0,45 3 x 0,5 3,5 x 0,6 4 x 0,7 5 x 0,8 6x1 7x1 8 x 1,25 9 x 1,25 10 x 1,5

5 5 5 7 8 8 8 8 9 11 13 13 16 19 19 22 22 24

40 40 40 40 40 40 40 45 50 56 56 63 70 80 80 90 90 100

2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,8 2,8 3,5 4 4,5 6 6 7 8 9 10

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1025001x025 10250011x025 10250012x025 10250014x030 10250016x035 10250017x035 10250018x035 1025002x04 10250025x045 1025003x05 10250035x06 1025004x07 1025005x08 1025006x1 1025007x1 1025008x125 1025009x125 1025010x15

63,236 63,236 63,236 56,912 56,912 56,912 56,912 27,823 27,823 15,873 22,915 15,873 16,239 17,163 22,980 19,971 23,258 23,258

Art. 10345300

Art. 10345306

7 pcs M 3÷12

14 pcs M 3÷12 Ø 2,5 3,3 4,2 5 6,8 - 8,5 - 10,2

€ 132,559

≤3Ø

€ 156,458

Per fori passanti in acciai con R ≤ 850 N/mm2, ghisa, metalli non ferrosi a truciolo lungo. For through holes in steel with R ≤ 850 N/mm2, cast iron, non ferrous metals with long chip

10253

HSS-CO

HSS-CO AISI M35 HV 820÷850 ambo cilindrico Ø ≤ M3 Round shank Ø ≤ M3

FORM B 4-5 Filetti Threads

R ≤ 850 N/mm2

Applicazioni Applications

INOX

DIN 376/B ISO 2/6H

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

pcs

cod.

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5 12 x 1,75 14 x 2 16 x 2 18 x 2,5 20 x 2,5 22 x 2,5 24 x 3 27 x 3 30 x 3,5 33 x 3,5 36 x 4 39 x 4 42 x 4,5 45 x 4,5 48 x 5 52 x 5 56 x 5,5 60 x 5,5 64 x 6 68 x 6

11 13 16 19 22 24 29 30 30 34 34 34 38 38 45 50 56 60 60 65 70 70 70 75 80 80

56 63 70 80 90 100 110 110 110 125 140 140 160 160 180 180 200 200 200 220 250 250 250 280 315 315

2,2 2,8 3,5 4,5 6 7 9 11 12 14 16 18 18 20 22 25 28 32 32 36 36 40 40 45 50 50

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1025303X05 1025304X07 1025305X08 1025306X1 1025308X125 1025310X15 1025312X175 1025314X2 1025316X2 1025318X25 1025320X25 1025322X25 1025324X3 1025327X3 1025330X35 1025333X35 1025336X4 1025339X4 1025342X45 1025345X45 1025348X5 1025352X5 1025356X55 1025360X55 1025364X6 1025368X6

€ cad/each

20,945 21,284 22,082 22,259 24,031 28,012 30,175 41,988 49,412 61,971 78,094 98,946 111,428 170,720 208,465 264,283 295,470 415,503 442,854 492,447 589,288 686,144 1.520,016 1.749,834 2.147,063 2.324,354

261

MASCHI A MACCHINA AL COBALTO, SCANALATURE DIRITTE, IMB. “C”, FILETTATURA ISO PASSO GROSSO Machine taps, “C” chamfer form, metric thread

10251

HSS-CO

DIN 371/C ISO 2/6H

HSS-CO AISI M35 HV 820÷850 FORM C 2-3 Filetti Threads

M €

pcs

cod.

cad/each

2 x 0,4 2,3 x 0,4 2,5 x 0,45 2,6 x 0,45 3 x 0,5 3,5 x 0,6 4 x 0,7 5 x 0,8 6x1 7x1 8 x 1,25 10 x 1,5

8 9 9 9 11 13 13 16 19 19 22 24

45 45 50 50 56 56 63 70 80 80 90 100

2,8 2,8 2,8 2,8 3,5 4 4,5 6 6 7 8 10

1 1 1 1 1 1 1 1 1 1 1 1

1025102X04 10251023X04 10251025X045 10251026X045 1025103X05 10251035X06 1025104X07 1025105X08 1025106X1 1025107X1 1025108X125 1025110X15

21,044 21,044 21,044 21,044 15,295 16,363 15,295 15,295 16,299 20,326 18,501 21,749

R ≤ 850 N/mm2

≤ 1,5 Ø

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

Per fori ciechi e passanti in acciai e ghisa con ≤ 850 N/mm2 For blind and trough holes in steel with ≤ 850 N/mm2

10254

HSS-CO

HSS-CO AISI M35 HV 820÷850 ambo cilindrico Ø ≤ M3 Round shank Ø ≤ M3

FORM C 2-3 Filetti Threads

R ≤ 850 N/mm2

Applicazioni Applications

INOX

DIN 376/C ISO 2/6 H

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5 12 x 1,75 14 x 2 16 x 2 18 x 2,5 20 x 2,5 22 x 2,5 24 x 3 27 x 3 30 x 3,5 33 x 3,5 36 x 4 39 x 4 42 x 4,5 45 x 4,5 48 x 5 52 x 5

11 13 16 19 22 24 29 30 32 34 34 34 38 38 45 50 56 60 60 65 70 70

56 63 70 80 90 100 110 110 110 125 140 140 160 160 180 180 200 200 200 220 250 250

2,2 2,8 3,5 4,5 6 7 9 11 12 14 16 18 18 20 22 25 28 32 32 36 36 40

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1025403X05 1025404X07 1025405X08 1025406X1 1025408X125 1025410X15 1025412X175 1025414X2 1025416X2 1025418X25 1025420X25 1025422X25 1025424X3 1025427X3 1025430X35 1025433X35 1025436X4 1025439X4 1025442X45 1025445X45 1025448X5 1025452X5

17,190 17,476 18,101 18,280 20,752 24,205 29,099 36,273 42,668 63,767 80,796 101,644 110,246 145,755 199,667 228,867 255,324 331,612 370,535 425,032 510,662 604,068

≤ 1,5 Ø

262

€

MASCHI A MACCHINA AL COBALTO, SCANALATURE DESTRE 15°, IMB. “C”, FILETTATURA METRICA ISO PASSO GROSSO Machine taps, 15° spiral flute, metric thread

10256

HSS-CO

DIN 371/C-15° ISO 2/6H

HSS-CO AISI M35 HV 820÷850

M €

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

11 13 16 19 22 24

56 63 70 80 90 100

3,5 4,5 6 6 8 10

1 1 1 1 1 1

1025603X05 1025604X07 1025605X08 1025606X1 1025608X125 1025610X15

20,131 20,131 20,131 21,188 23,157 27,263

FORM C 2-3 Filetti Threads

Art. 10345311

Art. 10345312

7 pcs M 3÷12

14 pcs M 3÷12 Ø 2,5 3,3 4,2 5 6,8 - 8,5 - 10,2

€ 150,891 ≤ 1,5 Ø

€ 190,384

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

10258

HSS-CO

Per fori ciechi in acciai con R ≤ 850 N/mm2, ghisa malleabile, metalli non ferrosi a truciolo lungo. For blind holes in steel with R ≤ 850 N/mm2, malleable cast iron, non ferrous metals with long chip.

DIN 376/C-15° ISO 2/6H

HSS-CO AISI M35 HV 820÷850 Gambo cilindrico Ø ≤ M3 Round shank Ø ≤ M3

FORM C 2-3 Filetti Threads

M €

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5 12 x 1,75 14 x 2 16 x 2 18 x 2,5 20 x 2,5 22 x 2,5 24 x 3

11 13 16 19 22 24 29 30 30 34 34 34 38

56 63 70 80 90 100 110 110 110 125 140 140 160

2,2 2,8 3,5 4,5 6 7 9 11 12 14 16 18 18

1 1 1 1 1 1 1 1 1 1 1 1 1

1025803X05 1025804X07 1025805X08 1025806X1 1025808X125 1025810X15 1025812X175 1025814X2 1025816X2 1025818X25 1025820X25 1025822X25 1025824X3

21,122 22,138 22,138 23,157 24,773 31,031 35,295 44,643 52,062 79,409 84,462 107,158 114,763

R ≤ 850 N/mm2

≤ 1,5 Ø

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

263

MASCHI A MACCHINA AL COBALTO, SCANALATURE DESTRE 35°, IMB. “C”, FILETTATURA METRICA ISO Machine taps, 35° spiral flute, metric coarse thread

10255

HSS-CO

DIN 371/C-35° ISO 2/6H

HSS-CO AISI M35

M MICRO MACHINE TAPS HSS-CO

HV 820÷850

FORM C 2-3 Filetti Threads

≤3Ø

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Alluminio Aluminum

pcs

cod.

cad/each

1 x 0,25 1,1 x 0,25 1,2 x 0,25 1,4 x 0,30 1,6 x 0,35 1,7 x 0,35 1,8 x 0,35 2 x 0,4 2,5 x 0,45 3 x 0,5 3,5 x 0,6 4 x 0,7 5 x 0,8 6x1 7x1 8 x 1,25 9 x 1,25 10 x 1,5

4 4 4 5 6 6 6 6 6 6 13 7 8 10 19 14 14 16

40 40 40 40 40 40 40 45 50 56 56 63 70 80 80 90 90 100

2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,8 2,8 3,5 4 4,5 6 6 7 8 9 10

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1025501x025 10255011x025 10255012x025 10255014x030 10255016x035 10255017x035 10255018x035 1025502X04 10255025X045 1025503X05 10255035X06 1025504X07 1025505X08 1025506X1 1025507X1 1025508X125 1025509X125 1025510X15

80,837 80,837 80,837 73,013 73,013 73,013 73,013 33,899 33,899 23,755 31,370 23,755 23,939 25,033 36,506 27,420 32,829 32,829

Art. 10345305

Art. 10345307

Art. 10345310

7 pcs M 3÷12

14 pcs M 3÷12 Ø 2,5 3,3 4,2 5 6,8 - 8,5 - 10,2

14 pcs DIN 371/ B+371/C 35°

€ 163,589

Alu

€ 197,426

Olio Oil

10257

HSS-CO

HV 820÷850 Gambo cilindrico Ø ≤ M3 Round shank Ø ≤ M3

FORM C 2-3 Filetti Threads

≤3Ø R ≤ 850 N/mm2

Applicazioni Applications

INOX

Metalli Metals

Olio Oil

264

Acciaio Steel

Inox Stainless

Alluminio Aluminum Alu

€ 284,859

DIN 376/C-35° ISO 2/6H

HSS-CO AISI M35

€

pcs

cod.

5 7 8 10 13 15 18 20 22 25 25 25 30 30 35 35 40 40 45 45 50 50 70 70 75 75

56 63 70 80 90 100 110 110 110 125 140 140 160 160 180 180 200 200 200 220 250 250 250 280 315 315

2,2 2,8 3,5 4,5 6 7 9 11 12 14 16 18 18 20 22 25 28 32 32 36 36 40 40 45 50 50

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1025703X05 1025704X07 1025705X08 1025706X1 1025708X125 1025710X15 1025712X175 1025714X2 1025716X2 1025718X25 1025720X25 1025722X25 1025724X3 1025727X3 1025730X35 1025733X35 1025736X4 1025739X4 1025742X45 1025745X45 1025748X5 1025752X5 1025756X55 1025760X55 1025764X6 1025768X6

€ cad/each

24,889 26,128 26,128 26,128 28,436 35,530 41,956 53,040 64,553 84,893 93,997 115,449 125,621 185,091 226,558 273,941 353,543 462,203 527,066 588,692 668,162 793,029 1.732,025 1.986,640 2.443,970 2.646,688

SERIE LUNGA LONG SERIE

LUNGHI LONG

MASCHI A MACCHINA AL COBALTO “LUNGHI”, FILETTATURA METRICA ISO A PASSO GROSSO Long machine taps, ISO metric coarse threads

10291

HSS-CO

DIN 371/B ISO 2/6H

HSS-CO AISI M35 HV 820÷850 Gambo rinforzato Reinforced shank

FORM B 4-5 Filetti Threads

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

10292

HSS-CO

FORM C 2-3 Filetti Threads

R ≤ 850 N/mm2

Applicazioni

€

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 4 x 0,7 5 x 0,8 5 x 0,8 5 x 0,8 6x1 6x1 6x1 8 x 1,25 8 x 1,25 10 x 1,5 10 x 1,5 12 x 1,75 12 x 1,75

100 100 120 100 120 150 100 120 150 120 150 120 150 120 150

11 13 13 16 16 16 19 19 19 22 22 24 24 29 29

3,5 4,5 4,5 6 6 6 6 6 6 8 8 10 10 12 12

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1029103100 1029104100 1029104120 1029105100 1029105120 1029105150 1029106100 1029106120 1029106150 1029108120 1029108150 1029110120 1029110150 1029112120 1029112150

28,544 28,544 30,323 30,323 32,650 34,867 30,323 32,650 34,867 37,210 43,097 43,097 52,419 49,969 60,101

DIN 371/C-35° ISO 2/6H

HSS-CO AISI M35 HV 820÷850

M €

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 4 x 0,7 5 x 0,8 5 x 0,8 5 x 0,8 6x1 6x1 6x1 8 x 1,25 8 x 1,25 10 x 1,5 10 x 1,5 12 x 1,75 12 x 1,75

100 100 120 100 120 150 100 120 150 120 150 120 150 120 150

6 7 7 8 8 8 10 10 10 14 14 16 16 18 18

3,5 4,5 4,5 6 6 6 6 6 6 8 8 10 10 12 12

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1029203100 1029204100 1029204120 1029205100 1029205120 1029205150 1029206100 1029206120 1029206150 1029208120 1029208150 1029210120 1029210150 1029212120 1029212150

33,759 33,759 34,867 36,102 38,427 41,879 36,102 38,427 41,879 44,206 48,862 51,201 59,415 53,392 63,660

Applications

INOX

Acciaio Steel

Inox Stainless

Metalli Metals

Alluminio Aluminum Alu

Olio Oil

Per maschiature in acciai con R≤850 N/mm2, ghisa malleabile, metalli non ferrosi a truciolo lungo, acciai resistenti al calore, acciai refrattari, acciai inox. For threading steel with R≤850 N/mm2,malleable cast iron, nonferrous metal with long chips, heat-resistant and refractory steel, stainless steel.

265

CON CANALINE W TH OOL N S STE

MASCHI A MACCHINA AL COBALTO CON CANALINA DI REFRIGERAZIONE INTERNA, FILETTATURA METRICA ISO A PASSO GROSSO Machine taps with internal cooling system, ISO metric thread

10340

DIN 371/C ISO 6H

Hm solid carbide con canalina internal cooling system

HM SOLID CARBIDE

FORM C 2-3 Filetti Threads

€

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

8 10 10 12 16 18

56 63 70 80 90 100

3,5 4,5 6 6 8 10

1 1 1 1 1 1

1034003X05 1034004X07 1034005X08 1034006X1 1034008X125 1034010X15

167,567 167,567 145,500 197,822 300,225 300,225

R ≤ 1300 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Altissimo rendimento nella maschiatura di acciai ad alta resistenza sino R≤1300 N/mm2, quali acciai inox, acciai resistenti alla corrosione, acciai refrattari, acciai da bonifica alto legati trattati. Temperatura operativa sino a 800°

Metalli Metals

Olio Oil

High performances in high strength steel with R≤1300 N/mm2, stainless steel, heat resistant steel, high alloy steel.

10330

HSS-CO

DIN 371/C-40° ISO 2/6H

con canalina internal cooling system

HSS-CO AISI M35 HV 820÷850

FORM C 40°

2-3 Filetti Threads

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Metalli Metals

Olio Oil

266

Acciaio Steel

Inox Stainless

Alluminio Aluminum Alu

M €

pcs

cod.

cad/each

5 x 0,8 6x1 8 x 1,25 10 x 1,5

8,5 11 14 16

70 80 90 100

6 6 8 10

1 1 1 1

1033005X08 1033006X1 1033008X125 1033010X15

104,730 104,730 104,730 148,947

Machine taps, straight flutes, interrupted threads, spiral point

10261

HSS-CO

Serie lunga - M Long serie

DIN 371/B ISO 2/6H

HSS-CO AISI M35 HV 820÷850

FORM B

€

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

11 13 16 19 22 24

56 63 70 80 90 100

3,5 4,5 6 6 8 10

1 1 1 1 1 1

1026103X05 1026104X07 1026105X08 1026106X1 1026108X125 1026110X15

22,673 22,673 24,267 24,267 29,782 35,542

4-5 Filetti Threads

R ≥ 900 N/mm2

Applicazioni Applications

Acciaio Steel

Inox Stainless

INOX

10262

HSS-CO

Alluminio Aluminum

Metalli Metals

Gambo cilindrico Ø ≤ M3 Round shank Ø ≤ M3

FORM B 4-5 Filetti Threads

Serie lunga - M Long serie

DIN 376/B ISO 2/6H

HSS-CO AISI M35 HV 820÷850

Olio Oil

Alu

€

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5 12 x 1,75 14 x 2 18 x 2,5 20 x 2,5 22 x 2,5 24 x 3

11 13 16 19 22 24 29 30 34 34 34 38

56 63 70 80 90 100 110 110 125 140 140 160

2,2 2,8 3,5 4,5 6 7 9 11 14 16 18 18

1 1 1 1 1 1 1 1 1 1 1 1

1026203X05 1026204X07 1026205X08 1026206X1 1026208X125 1026210X15 1026212X175 1026214X2 1026218X25 1026220X25 1026222X25 1026224X3

24,403 24,403 25,639 25,639 30,885 40,768 47,225 61,154 88,328 119,520 137,437 146,703

Maschi con filetto alternato Il filetto alternato assicura meno attrito e quindi meno resistenza, particolarmente importante in fase di filettatura di materiali resilienti e difficili da lavorare (quali per esempio alluminio o bronzo). Il lubrificante penetra più agevolmente sino al bordo tagliente, riducendo la coppia generata.

R ≥ 900 N/mm2

Per filettature in fori passanti in acciai con R≥900 N/mm2, acciai da bonifica e cementazione, acciai inox, materiali di difficile truciolabilità, acciai da utensile, bronzi e leghe di rame, alluminio e leghe, materiali sintetici duri.

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Taps with interrupted thread.

Metalli Metals

Alluminio Aluminum

The interrupted thread ensures less friction and therefore less resistance, which is particularly important when threading resilient and difficult-to-work materials (such as aluminum or bronze). The lubricant penetrates more easily up to the cutting edge, reducing the torque generated.

Olio Oil

Alu

For through holes in steel with R 900 N/mm2, high alloy steel, tool steel, stainless steel, bronze, hard sinterized materials. 267

FILETTI ALTERNATI INTERRUPTED THREADS

MASCHI A MACCHINA AL COBALTO, CAVE DIRITTE E FILETTI ALTERNATI, IMB. CORRETTO, FILETTATURA METRICA ISO

SINISTRI LEFT HAND

MASCHI A MACCHINA AL COBALTO “SINISTRI”, FILETTATURA METRICA ISO A PASSO GROSSO Machine taps, “left hand”, metric coarse thread

10277

HSS-CO

DIN 371/B

HSS-CO AISI M35 HV 820÷850

FORM B

Sinistra Le hand

€

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

11 13 16 19 22 24

56 63 70 80 90 100

3,5 4,5 6,0 6,0 8,0 10,0

1 1 1 1 1 1

1027703X05 1027704X07 1027705X08 1027706X1 1027708X125 1027710X15

34,242 34,242 35,166 35,166 40,954 46,549

4-5 Filetti Threads

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

10278

HSS-CO

FORM B 4-5 Filetti Threads

R ≤ 850 N/mm2

Applicazioni Applications

268

HSS-CO AISI M35 HV 820÷850

INOX

DIN 376/B

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

Sinistra Le hand

€

pcs

cod.

cad/each

12 x 1,75 14 x 2 16 x 2 18 x 2,5 20 x 2,5 22 x 2,5 24 x 3 27 x 3 30 x 3,5

29 30 32 34 34 34 38 38 45

110 110 110 125 140 140 160 160 180

9,0 11,0 12,0 14,0 16,0 18,0 18,0 20,0 22,0

1 1 1 1 1 1 1 1 1

1027812X175 1027814X2 1027816X2 1027818X25 1027820X25 1027822X25 1027824X3 1027827X3 1027830X35

58,673 80,307 93,823 123,111 178,129 222,175 238,044 394,757 430,550

SINISTRI LEFT HAND

MASCHI A MACCHINA AL COBALTO “SINISTRI”, FILETTATURA METRICA ISO A PASSO GROSSO Machine taps, “left hand”, metric coarse thread

10263

HSS-CO

DIN 371/C

HSS-CO AISI M35 HV 820÷850

FORM C 2-3 Filetti Threads

Sinistra Le hand

€

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

11 13 16 19 22 24

56 63 70 80 90 100

3,5 4,5 6,0 6,0 8,0 10,0

1 1 1 1 1 1

1026303X05 1026304X07 1026305X08 1026306X1 1026308X125 1026310X15

29,539 29,539 30,580 30,580 37,115 42,197

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

10264

HSS-CO

DIN 376/C

HSS-CO AISI M35 HV 820÷850

FORM C

Sinistra Le hand

€

pcs

cod.

cad/each

12 x 1,75 14 x 2 16 x 2 18 x 2,5 20 x 2,5 22 x 2,5 24 x 3

29 30 30 34 34 34 38

110 110 110 125 140 140 160

9,0 11,0 12,0 14,0 16,0 18,0 18,0

1 1 1 1 1 1 1

1026412X175 1026414X2 1026416X2 1026418X25 1026420X25 1026422X25 1026424X3

50,189 70,777 96,064 132,282 183,512 193,889 207,739

2-3 Filetti Threads

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

269

SINISTRI LEFT HAND

MASCHI A MACCHINA AL COBALTO “SINISTRI”, SCAN. DESTRE 35°, IMB. “C”, FILETTATURA METRICA ISO

Machine taps “left hand”, 35° spiral flute, metric coarse thread

10279

HSS-CO

DIN 371/C-35° - ISO 2/6H

HSS-CO AISI M35 HV 820÷850

FORM C

Sinistra Le hand

€

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

6 7 8 10 14 16

56 63 70 80 90 100

3,5 4,5 6,0 6,0 8,0 10,0

1 1 1 1 1 1

1027903X05 1027904X07 1027905X08 1027906X1 1027908X125 1027910X15

38,771 38,771 38,771 41,574 50,047 56,683

2-3 Filetti Threads

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Acciaio Steel

Inox Stainless

Metalli Metals

10288

Olio Oil

Alluminio Aluminum Alu

HSS-CO

DIN 376/C-35° - ISO 2/6H

HSS-CO AISI M35 HV 820÷850

FORM C 2-3 Filetti Threads

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Metalli Metals

270

Acciaio Steel

Inox Stainless

Alluminio Aluminum Alu

Olio Oil

Sinistra Le hand

€

pcs

cod.

cad/each

12 x 1,75 14 x 2 16 x 2 18 x 2,5 20 x 2,5 22 x 2,5 24 x 3 27 x 3 30 x 3,5

18 20 22 25 25 27 30 30 35

110 110 110 125 140 140 160 160 180

9,0 11,0 12,0 14,0 16,0 18,0 18,0 20,0 22,0

1 1 1 1 1 1 1 1 1

1028812X175 1028814X2 1028816X2 1028818X25 1028820X25 1028822X25 1028824X3 1028827X3 1028830X35

61,534 80,428 90,215 121,438 173,481 192,409 198,710 340,649 353,276

Cold forming machine taps, ISO thread

10360

HSS-CO

TiN

HSS-CO+TiN HV 0,05=2500 ISO 2X/6HX

2-3 Filetti Threads

Applicazioni Applications

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

10280

DIN 371 Ø

preforo drill

pcs

cod.

cad/each

€

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

11 13 16 19 22 24

56 63 70 80 90 100

3,5 4,5 6,0 6,0 8,0 10

2,80 3,70 4,65 5,55 7,45 9,30

1 1 1 1 1 1

1036003X05 1036004X07 1036005X08 1036006X1 1036008X125 1036010X15

48,085 52,806 61,957 61,957 73,952 86,874

DIN 376 Ø

preforo drill

pcs

cod.

cad/each

12 x 1,75 14 x 2 16 x 2

29 30 32

110 110 110

9,0 11 12

11,20 13,00 15,01

1 1 1

1036012X175 1036014X2 1036016X2

127,201 172,182 190,801

€

MASCHI A R LLAR uesto tipo di maschi differisce da quelli a tagliare poich il filetto è prodotto per deformazione plastica del materiale, piuttosto che per la tradizionale azione di taglio. uesto significa che non viene prodotto truciolo durante la lavorazione. I maschi a rullare possono essere impiegati su materiali con buone caratteristiche di deformabilità. I maschi a rullare senza scanalature sono raccomandati per lavorazioni comuni ed in particolare per la filettatura di lamiere. Sono disponibili anche nella versione con passaggio interno di lubrificante.

R ≥ 1200 N/mm2

INOX

Senza canalini - M

~ DIN 2174

HSS-CO

COLD FORMING TAPS This type of tap differs from cutting taps in that the thread is produced by plastic deformation of the material, rather than by the traditional cutting action. This means that no chips are produced during machining. Forming taps can be used on materials with good deformability characteristics. Cold forming taps are recommended for common machining and especially for sheets. They are also available in the version with internal lubricant passage.

HSS-CO AISI M35 HV 820÷850 ISO 2X/6HX

2-3 Filetti Threads

M R ≥ 850 N/mm2

Senza canalini - M

~ DIN 2174 DIN 371 Ø

preforo drill

pcs

cod.

cad/each

€

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

11 13 16 19 22 24

56 63 70 80 90 100

3,5 4,5 6,0 6,0 8,0 10

2,80 3,70 4,65 5,55 7,45 9,30

1 1 1 1 1 1

1028003X05 1028004X07 1028005X08 1028006X1 1028008X125 1028010X15

27,723 31,239 33,780 33,780 40,813 48,890

DIN 376 Ø

preforo drill

pcs

cod.

cad/each

12 x 1,75 14 x 2 16 x 2

29 30 32

110 110 110

9,0 11 12

11,20 13,00 15,01

1 1 1

1028012X175 1028014X2 1028016X2

60,607 85,244 107,352

€

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

271

A RULLARE - SPECIALI PER LAMIERE COLD FORMING - FOR SHEETS

MASCHI A MACCHINA AL COBALTO A RULLARE, FILETTATURA METRICA ISO A PASSO GROSSO

A RULLARE - SPECIALI PER LAMIERE COLD FORMING - FOR SHEETS

MASCHI A MACCHINA AL COBALTO A RULLARE, CON CANALINI DI LUBRIFICAZIONE, FILETTATURA METRICA ISO A PASSO GROSSO Cold forming machine taps, ISO thread

10361

HSS-CO

TiN

~ DIN 2174

HSS-CO+TiN HV 0,05=2500 ISO 2X/6HX Gambo rinforzato Reinforced shank

2-3 Filetti Threads

Con canalini - M

DIN 371 Ø

preforo drill

pcs

cod.

cad/each

€

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

11 13 16 19 22 24

56 63 70 80 90 100

3,5 4,5 6,0 6,0 8,0 10

2,80 3,70 4,65 5,55 7,45 9,30

1 1 1 1 1 1

1036103X05 1036104X07 1036105X08 1036106X1 1036108X125 1036110X15

50,640 55,270 59,506 61,630 74,723 89,912

DIN 376 Ø

preforo drill

pcs

cod.

cad/each

12 x 1,75 14 x 2 16 x 2

29 30 32

110 110 110

9,0 11 12

11,20 13,00 15,01

1 1 1

1036112X175 1036114X2 1036116X2

120,317 164,360 193,969

€

R ≥ 1200 N/mm2

Con canalini di lubrificazione With oil grooves

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

10281

HSS-CO

Raccomandata Lubrorefrigerazione con olio o grafite Recommended oil or graphite cooling

~ DIN 2174

HSS-CO AISI M35 HV 820÷850 ISO 2X/6HX Gambo rinforzato Reinforced shank

2-3 Filetti Threads

Con canalini - M DIN 371 Ø

preforo drill

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

11 13 16 19 22 24

56 63 70 80 90 100

3,5 4,5 6,0 6,0 8,0 10

2,80 3,70 4,65 5,55 7,45 9,30

1 1 1 1 1 1

1028103X05 1028104X07 1028105X08 1028106X1 1028108X125 1028110X15

33,542 37,751 41,946 41,946 49,853 57,669

DIN 376 Ø

preforo drill

pcs

cod.

cad/each

12 x 1,75 14 x 2 16 x 2

29 30 32

110 110 110

9,0 11 12

11,20 13,00 15,01

1 1 1

1028112X175 1028114X2 1028116X2

72,381 107,479 129,563

R ≥ 850 N/mm2

Con canalini di lubrificazione With oil grooves

Applicazioni Applications

INOX

272

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

Raccomandata Lubrorefrigerazione con olio o grafite Recommended oil or graphite cooling

€

Machine taps oversize

10310

HSS-CO

ISO 3 DIN 371/B

6G Filetto con tolleranza lasca Thread with large clearance Gambo rinforzato Reinforced shank

DIN 376/B

DIN 371/B Ø

pcs

cod.

cad/each

€

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

11 13 16 19 22 24

56 63 70 80 90 100

1 1 1 1 1 1

1031003X05 1031004X07 1031005X08 1031006X1 1031008X125 1031010X15

18,094 18,094 18,852 18,852 23,121 26,391

DIN 376/B Ø

pcs

cod.

cad/each

12 x 1,75

110

1031012X175

31,667

€

Per filettature in acciai con R≤850 N/mm2, ghisa, metalli non erosi a truciolo lungo. For threading in steel with R≤850 N/mm2, cast iron, non ferrous metals with long chip.

R ≤ 850 N/mm

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

10313

HSS-CO

ISO 3 DIN 371/C-35°

6G Filetto con tolleranza lasca Thread with large clearance Gambo rinforzato Reinforced shank

6g €

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

6 7 8 10 14 16

56 63 70 80 90 100

1 1 1 1 1 1

1031303X05 1031304X07 1031305X08 1031306X1 1031308X125 1031310X15

21,614 21,614 22,622 22,622 27,649 31,918

Per filettature in acciai con R≤850 N/mm2, ghisa, metalli non erosi a truciolo lungo. For threading in steel with R≤850 N/mm2, cast iron, non ferrous metals with long chip.

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Acciaio Steel

Inox Stainless

Metalli Metals

Olio Oil

Alluminio Aluminum Alu

273

SOVRADIMENSIONATI OVERSIZE

MASCHI A MACCHINA AL COBALTO “SOVRADIMENSIONATI”, FIL. DIN 13 A PASSO GROSSO

SOVRADIMENSIONATI OVERSIZE

MASCHI A MACCHINA AL COBALTO “SOVRADIMENSIONATI”, FIL. DIN 13 A PASSO GROSSO Machine taps oversize

10311

HSS-CO

ISO 3 DIN 371/B

7G Tolleranza necessaria per tenere conto delle distorsioni da trattamento termico Allowance for distorsion caused by heat treatment

DIN 376/B

DIN 371/B Ø

pcs

cod.

cad/each

€

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

11 13 16 19 22 24

56 63 70 80 90 100

1 1 1 1 1 1

1031103X05 1031104X07 1031105X08 1031106X1 1031108X125 1031110X15

18,353 18,353 19,349 19,349 24,376 29,154

DIN 376/B Ø

pcs

cod.

cad/each

12 x 1,75

110

1031112X175

33,684

€

Per filettature in acciai con R≤850 N/mm2, ghisa, metalli non erosi a truciolo lungo. For threading in steel with R≤850 N/mm2, cast iron, non ferrous metals with long chip.

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

10314

HSS-CO

ISO 3 DIN 371/C-35°

7G Tolleranza necessaria per tenere conto delle distorsioni da trattamento termico Allowance for distorsion caused by heat treatment

DIN 376/C-35°

DIN 371/C-35° Ø

pcs

cod.

cad/each

€

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

6 7 8 10 14 16

56 63 70 80 90 100

1 1 1 1 1 1

1031403X05 1031404X07 1031405X08 1031406X1 1031408X125 1031410X15

22,123 22,123 23,878 23,878 30,412 35,947

DIN 376/C-35° Ø

pcs

cod.

cad/each

12 x 1,75

110

1031412X175

38,709

€

Per filettature in acciai con R≤850 N/mm2, ghisa, metalli non erosi a truciolo lungo. R ≤ 850 N/mm2

For threading in steel with R≤850 N/mm2, cast iron, non ferrous metals with long chip.

Applicazioni Applications

INOX

Metalli Metals

274

Acciaio Steel

Inox Stainless

Alluminio Aluminum Alu

Olio Oil

Machine taps oversize

10312

HSS-CO

ISO 3 DIN 371/B

+0,1 mm Tolleranza che tiene conto di un eventuale spessore di rivestimento elettrodeposto (0,25 µm) Electroplating allowance thickness

DIN 376/B

0 1 mm

DIN 371/B Ø

pcs

cod.

cad/each

€

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

11 13 16 19 22 24

56 63 70 80 90 100

1 1 1 1 1 1

1031203X05 1031204X07 1031205X08 1031206X1 1031208X125 1031210X15

18,353 18,353 19,349 19,349 24,376 29,154

DIN 376/B Ø

pcs

cod.

cad/each

12 x 1,75

110

1031212X175

33,684

€

Per filettature in acciai con R≤850 N/mm2, ghisa, metalli non erosi a truciolo lungo. For threading in steel with R≤850 N/mm2, cast iron, non ferrous metals with long chip.

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

10315

HSS-CO

ISO 3 DIN 371/C-35°

+0,1 mm Tolleranza che tiene conto di un eventuale spessore di rivestimento elettrodeposto (0,25 µm) Electroplating allowance thickness

DIN 376/C-35°

0 1 mm

DIN 371/C-35° Ø

pcs

cod.

cad/each

€

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

6 7 8 10 14 16

56 63 70 80 90 100

1 1 1 1 1 1

1031503X05 1031504X07 1031505X08 1031506X1 1031508X125 1031510X15

22,123 22,123 23,878 23,878 30,412 35,947

DIN 376/C-35° Ø

pcs

cod.

cad/each

12 x 1,75

110

1031512X175

38,960

€

Per filettature in acciai con R≤850 N/mm2, ghisa, metalli non erosi a truciolo lungo. For threading in steel with R≤850 N/mm2, cast iron, non ferrous metals with long chip. R ≤ 850 N/mm2

Applicazioni Applications

INOX

Acciaio Steel

Inox Stainless

Metalli Metals

Olio Oil

Alluminio Aluminum Alu

275

SOVRADIMENSIONATI OVERSIZE

MASCHI A MACCHINA AL COBALTO “SOVRADIMENSIONATI”, FIL. DIN 13 A PASSO GROSSO

PER DADI FOR NUTS

MASCHI A MACCHINA AL COBALTO PER DADI, FILETTATURA METRICA ISO A PASSO GROSSO Machine nut taps, metric coarse thread

10273

HSS-CO

DIN 357 ISO 2/6H

HSS-CO AISI M35 HV 820÷850 Gambo cilindrico Ø ≤ M3 Round shank Ø ≤ M3

R 850 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

M €

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5 12 x 1,75 14 x 2 16 x 2 18 x 2,5 20 x 2,5 22 x 2,5 24 x 3

22 25 28 32 40 45 50 56 63 63 70 80 80

70 90 100 110 125 140 180 200 200 220 250 280 280

2,2 2,8 3,5 4,5 6 7 9 11 12 14 16 18 18

1 1 1 1 1 1 1 1 1 1 1 1 1

1027303X05 1027304X07 1027305X08 1027306X1 1027308X125 1027310X15 1027312X175 1027314X2 1027316X2 1027318X25 1027320X25 1027322X25 1027324X3

22,060 22,060 23,560 24,642 32,113 36,885 47,447 62,310 90,873 110,222 115,139 118,452 139,614

PUNTA-MASCHIO A MACCHINA AL COBALTO PER FORATURE E FILETTATURE IN UNA SOLA OPERAZIONE

Combined machine drill-tap for drilling and threading in one operation

UTENSILE COMBINATO COMBINED DRILL TAP

10290

HSS-CO

M l

L d1

R ≤ 850 N/mm2

Applicazioni Applications

INOX

276

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

DIN 357 ISO 2/6H

€

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5 12 x 1,75

15 15 19 22 25 30 30

56 63 71 80 95 106 115

2,5 3,3 4,2 5 6,8 8,5 10,2

3 4 5 6 8 10 12

1 1 1 1 1 1 1

1029003X05 1029004X07 1029005X08 1029006X1 1029008X125 1029010X15 1029012X175

60,929 60,929 60,929 67,564 74,124 83,197 99,417

MASCHI A MACCHINA AL COBALTO, SCAN. DIRITTE, IMB. CORRETTO, FILETTATURA METRICA ISO A PASSO FINE Machine taps, metric ISO fine thread

10259

HSS-CO

DIN 374/B ISO 2/6H

Ø Gambo cilindrico Ø ≤ M3 Round shank Ø ≤ M3

R ≤ 850 N/mm2

Applicazioni Applications

Inox Stainless INOX

Acciaio Steel

Metalli Metals

Olio Oil

l 3 x 0,35 4 x 0,35 4 x 0,5 5 x 0,5 5 x 0,75 6 x 0,5 6 x 0,75 7 x 0,75 8 x 0,5 8 x 0,75 8x1 9 x 0,75 9x1 10 x 0,75 10 x 1 10 x 1,25 11 x 1 11 x 1,25 12 x 0,75 12 x 1 12 x 1,25 12 x 1,5 13 x 1 13 x 1,5 14 x 0,75 14 x 1 14 x 1,25 14 x 1,5 15 x 1 15 x 1,5 16 x 1 16 x 1,25 16 x 1,5 18 x 1 18 x 1,25 18 x 1,5 18 x 2 20 x 1 20 x 1,25 20 x 1,5 20 x 2 21 x 1,5 22 x 1 22 x 1,25 22 x 1,5 22 x 2 23 x 1,5 24 x 1 24 x 1,25 24 x 1,5 24 x 2 25 x 1 25 x 1,5

d pcs.

9 56 10 63 10 63 12 70 12 70 14 80 14 80 14 80 19 80 19 80 22 90 19 80 22 90 20 90 20 90 24 100 20 90 22 90 22 100 22 100 22 100 22 100 22 100 22 100 22 100 22 100 22 100 22 100 22 100 22 100 22 100 22 100 22 100 25 110 25 110 25 110 34 125 25 125 25 125 25 125 34 140 25 125 25 125 25 125 25 125 34 140 25 125 28 140 28 140 28 140 28 140 28 140 28 140

2,2 2,8 2,8 3,5 3,5 4,5 4,5 5,5 6 6 6 7 7 7 7 7 8 8 9 9 9 9 11 11 11 11 11 11 12 12 12 12 12 14 14 14 14 16 16 16 16 16 18 18 18 18 18 18 18 18 18 18 18

MF €

cod.

cad/each

1 1025903X035 1 1025904X035 1 1025904X05 1 1025905X05 1 1025905X075 1 1025906X05 1 1025906X075 1 1025907X075 1 1025908X05 1 1025908X075 1 1025908X1 1 1025909X075 1 1025909X1 1 1025910X075 1 1025910X1 1 1025910X125 1 1025911X1 1 1025911X125 1 1025912X075 1 1025912X1 1 1025912X125 1 1025912X15 1 1025913X1 1 1025913X15 1 1025914X075 1 1025914X1 1 1025914X125 1 1025914X15 1 1025915X1 1 1025915X15 1 1025916X1 1 1025916X125 1 1025916X15 1 1025918X1 1 1025918X125 1 1025918X15 1 1025918X2 1 1025920X1 1 1025920X125 1 1025920X15 1 1025920X2 1 1025921X15 1 1025922X1 1 1025922X125 1 1025922X15 1 1025922X2 1 1025923X15 1 1025924X1 1 1025924X125 1 1025924X15 1 1025924X2 1 1025925X1 1 1025925X15

36,637 36,637 31,957 31,957 36,637 32,856 32,856 45,203 52,153 42,376 37,094 49,479 45,203 43,208 43,208 43,208 61,215 61,215 61,215 50,419 50,419 50,419 71,683 71,683 71,683 71,683 71,683 71,683 71,683 71,683 71,683 71,683 71,683 86,261 86,261 86,261 86,261 110,414 110,414 110,414 110,414 124,607 124,607 124,607 124,607 124,607 166,406 143,837 143,837 143,837 143,837 174,727 174,727

l 25 x 2 26 x 1 26 x 1,5 26 x 2 27 x 1 27 x 1,5 27 x 2 28 x 1 28 x 1,5 28 x 2 29 x 1,5 30 x 1 30 x 1,5 30 x 2 30 x 2,5 30 x 3 32 x 1,5 32 x 2 32 x 3 33 x 1,5 33 x 2 33 x 3 34 x 1,5 34 x 2 35 x 1,5 36 x 1,5 36 x 2 36 x 3 38 x 1,5 39 x 1,5 39 x 2 39 x 3 40 x 1,5 40 x 2 40 x 3 42 x 1,5 42 x 2 42 x 3 45 x 1,5 45 x 2 45 x 3 48 x 1,5 48 x 2 48 x 3 50 x 1,5 50 x 2 50 x 3 52 x 1,5 52 x 2 52 x 3 63 x 1,5

28 140 28 140 28 140 28 140 28 140 28 140 28 140 28 140 28 140 28 140 28 150 28 150 28 150 28 150 45 180 45 180 28 150 28 150 50 180 30 160 30 160 50 180 30 170 30 170 30 170 30 170 30 170 56 200 30 170 30 170 30 170 60 200 30 170 30 170 60 200 30 170 30 170 60 200 32 180 32 180 50 200 32 190 32 190 50 225 32 190 32 190 50 225 32 190 32 190 50 225 50 275

d pcs. 18 18 18 18 20 20 20 20 20 20 22 22 22 22 22 22 22 22 22 25 25 25 28 28 28 28 28 28 28 32 32 32 32 32 32 32 32 32 36 36 36 36 36 36 36 36 36 40 40 40 50

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

cod.

€ cad/each

1025925X2 174,727 1025926X1 173,248 1025926X15 173,248 1025926X2 173,248 1025927X1 177,686 1025927X15 177,686 1025927X2 177,686 1025928X1 195,454 1025928X15 195,454 1025928X2 195,454 1025929X15 239,734 1025930X1 205,886 1025930X15 205,886 1025930X2 205,886 1025930X25 229,864 1025930X3 229,864 1025932X15 258,066 1025932X2 258,066 1025932X3 258,066 1025933X15 287,689 1025933X2 287,689 1025933X3 287,689 1025934X15 293,321 1025934X2 293,321 1025935X15 306,020 1025936X15 306,020 1025936X2 306,020 1025936X3 306,020 1025938X15 327,169 1025939X15 327,169 1025939X2 327,169 1025939X3 327,169 1025940X15 353,961 1025940X2 353,961 1025940X3 353,961 1025942X15 396,357 1025942X2 396,357 1025942X3 396,357 1025945X15 507,636 1025945X2 507,636 1025945X3 507,636 1025948X15 605,209 1025948X2 605,209 1025948X3 605,209 1025950X15 713,440 1025950X2 713,440 1025950X3 713,440 1025952X15 777,470 1025952X2 777,470 1025952X3 777,470 1025963X15 1.341,315

Per fori passanti in acciai con R≤850 N/mm2, ghisa, metalli non ferrosi a truciolo lungo. For through holes in steel with R≤850 N/mm2, cast iron, non ferrous metals with long chip.

277

MASCHI A MACCHINA AL COBALTO, SCANALATURE DIRITTE, IMBOCCO “C”, FIL. METRICA ISO A PASSO FINE Machine taps, “C” chamfer form, metric fine thread

10252

HSS-CO AISI M35 HV 820÷850

FORM C 2-3 Filetti Threads

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

HSS-CO

DIN 374/C ISO 2/6H

pcs

cod.

cad/each

4 x 0,35 5 x 0,5 6 x 0,75 8 x 0,75 8x1 10 x 1 10 x 1,25 12 x 1 12 x 1,25 12 x 1,5 14 x 1 14 x 1,25 14 x 1,5 16 x 1 16 x 1,5 18 x 1 18 x 1,5 18 x 2 20 x 1 20 x 1,25 20 x 1,5 20 x 2 22 x 1 22 x 1,5 22 x 2 24 x 1 24 x 1,5 24 x 2 25 x 1 26 x 1,5 27 x 1,5 27 x 2 28 x 1,5 30 x 1,5 30 x 2 32 x 1,5 32 x 2 33 x 2 35 x 1,5 36 x 1,5 36 x 2 38 x 1,5 40 x 1,5 42 x 1,5 45 x 1,5 48 x 1,5 50 x 1,5 52 x 1,5

10 12 14 19 22 20 24 22 22 22 22 22 22 22 22 25 25 34 25 25 25 34 25 25 34 28 28 28 28 28 28 28 28 28 28 28 28 30 30 30 30 30 30 30 32 32 32 32

63 70 80 80 90 90 100 100 100 100 100 100 100 100 100 110 110 125 125 125 125 140 125 125 140 140 140 140 140 140 140 140 140 150 150 150 150 160 170 170 170 170 170 170 180 190 190 190

2,8 3,5 4,5 6,0 6,0 7,0 7,0 9,0 9,0 9,0 11,0 11,0 11,0 12,0 12,0 14,0 14,0 14,0 16,0 16,0 16,0 16,0 18,0 18,0 18,0 18,0 18,0 18,0 18,0 18,0 20,0 20,0 20,0 22,0 22,0 22,0 22,0 25,0 28,0 28,0 28,0 28,0 32,0 32,0 36,0 36,0 36,0 40,0

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1025204X035 1025205X05 1025206X075 1025208X075 1025208X1 1025210X1 1025210X125 1025212X1 1025212X125 1025212X15 1025214X1 1025214X125 1025214X15 1025216X1 1025216X15 1025218X1 1025218X15 1025218X2 1025220X1 1025220X125 1025220X15 1025220X2 1025222X1 1025222X15 1025222X2 1025224X1 1025224X15 1025224X2 1025225X1 1025226X15 1025227X15 1025227X2 1025228X15 1025230X15 1025230X2 1025232X15 1025232X2 1025233X2 1025235X15 1025236X15 1025236X2 1025238X15 1025240X15 1025242X15 1025245X15 1025248X15 1025250X15 1025252X15

26,599 26,599 26,599 30,782 30,782 35,386 35,386 36,911 36,911 36,911 42,309 42,309 42,309 49,063 49,063 60,497 60,497 60,497 94,279 67,342 67,342 67,342 93,967 93,967 93,967 106,956 106,956 124,781 143,848 129,610 144,756 144,756 144,756 161,496 161,496 182,758 182,758 204,757 219,997 236,911 236,911 253,839 296,145 296,145 350,295 399,376 527,985 527,985

Per fori ciechi e passanti in acciai e ghisa con R≤850 N/mm2 For blind and through holes in steel with R≤850 N/mm2

278

€

MASCHI A MACCHINA AL COBALTO, SCAN. ELICOIDALI 35°, FIL. METRICA ISO A PASSO FINE Machine taps, 35° spiral flute, metric fine thread

10260

HSS-CO

DIN 374/C-35° ISO 2/6H

Ø Gambo cilindrico Ø ≤ M3 Round shank Ø ≤ M3

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Alluminio Aluminum Alu

Olio Oil

d pcs. 2,2 2,8 2,8 3,5 3,5 4,5 4,5 5,5 6 6 6 7 7 7 7 7 8 8 9 9 9 9 11 11 11 11 11 11 12 12 12 12 12 14 14 14 14 16 16 16 16 16 18 18 18 18 18 18 18 18 18 18

MF €

cod.

cad/each

1 1026003X035 1 1026004X035 1 1026004X05 1 1026005X05 1 1026005X075 1 1026006X05 1 1026006X075 1 1026007X075 1 1026008X05 1 1026008X075 1 1026008X1 1 1026009X075 1 1026009X1 1 1026010X075 1 1026010X1 1 1026010X125 1 1026011X1 1 1026011X125 1 1026012X075 1 1026012X1 1 1026012X125 1 1026012X15 1 1026013X1 1 1026013X15 1 1026014X075 1 1026014X1 1 1026014X125 1 1026014X15 1 1026015X1 1 1026015X15 1 1026016X1 1 1026016X125 1 1026016X15 1 1026018X1 1 1026018X125 1 1026018X15 1 1026018X2 1 1026020X1 1 1026020X125 1 1026020X15 1 1026020X2 1 1026021X15 1 1026022X1 1 1026022X125 1 1026022X15 1 1026022X2 1 1026023X15 1 1026024X1 1 1026024X125 1 1026024X15 1 1026024X2 1 1026025X1

39,115 41,722 37,811 41,722 41,722 41,722 41,722 41,722 50,849 37,811 44,331 64,631 49,545 58,672 49,545 51,502 57,239 57,239 57,239 57,239 57,239 57,239 69,950 69,950 69,950 69,950 69,950 69,950 81,281 81,281 81,281 81,281 81,281 99,768 99,768 99,768 99,768 122,052 122,052 122,052 122,052 122,052 140,813 140,813 134,215 134,215 162,599 162,599 162,599 162,599 162,599 178,859

l 25 x 1,5 25 x 2 26 x 1 26 x 1,5 26 x 2 27 x 1 27 x 1,5 27 x 2 28 x 1 28 x 1,5 28 x 2 29 x 1,5 30 x 1 30 x 1,5 30 x 2 30 x 2,5 30 x 3 32 x 1,5 32 x 2 32 x 3 33 x 1,5 33 x 2 33 x 3 34 x 1,5 34 x 2 35 x 1,5 36 x 1,5 36 x 2 36 x 3 38 x 1,5 39 x 1,5 39 x 2 39 x 3 40 x 1,5 40 x 2 40 x 3 42 x 1,5 42 x 2 42 x 3 45 x 1,5 45 x 2 45 x 3 48 x 1,5 48 x 2 48 x 3 50 x 1,5 50 x 2 50 x 3 52 x 1,5 52 x 2 52 x 3 63 x 1,5

28 140 28 140 28 140 28 140 28 140 28 140 28 140 28 140 28 140 28 140 28 140 28 150 28 150 28 150 28 150 45 180 45 180 28 150 28 150 50 180 30 160 30 160 50 180 30 170 30 170 30 170 30 170 30 170 56 200 30 170 30 170 30 170 60 200 30 170 30 170 60 200 30 170 30 170 60 200 32 180 32 180 50 200 32 190 32 190 50 225 32 190 32 190 50 225 32 190 32 190 50 225 40 275

d pcs. 18 18 18 18 18 20 20 20 20 20 20 22 22 22 22 22 22 22 22 22 25 25 25 28 28 28 28 28 28 28 32 32 32 32 32 32 32 32 32 36 36 36 36 36 36 36 36 36 40 40 40 50

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

cod.

€ cad/each

1026025X15 178,859 1026025X2 178,859 1026026X1 180,710 1026026X15 180,710 1026026X2 188,923 1026027X1 196,017 1026027X15 196,017 1026027X2 196,017 1026028X1 196,017 1026028X15 196,017 1026028X2 196,017 1026029X15 222,809 1026030X1 222,809 1026030X15 222,809 1026030X2 222,809 1026030X25 222,809 1026030X3 222,809 1026032X15 277,819 1026032X2 277,819 1026032X3 277,819 1026033X15 291,710 1026033X2 291,710 1026033X3 291,710 1026034X15 291,710 1026034X2 291,710 1026035X15 291,710 1026036X15 383,162 1026036X2 383,162 1026036X3 383,162 1026038X15 384,994 1026039X15 384,994 1026039X2 384,994 1026039X3 384,994 1026040X15 393,898 1026040X2 393,898 1026040X3 393,898 1026042X15 424,190 1026042X2 424,190 1026042X3 424,190 1026045X15 497,101 1026045X2 497,101 1026045X3 497,101 1026048X15 589,889 1026048X2 589,889 1026048X3 589,889 1026050X15 689,310 1026050X2 689,310 1026050X3 689,310 1026052X15 756,914 1026052X2 756,914 1026052X3 756,914 1026063X15 1.280,531

Per fori ciechi in acciai con R≤850 N/mm2, ghisa malleabile, metalli non ferrosi a truciolo lungo, acciai resistenti al calore, acciai inox. For blind holes in steel with R≤850 N/mm2, malleable cast iron, non ferrous metals with long chips, stainless steel, heat resistant steel.

279

SINISTRI LEFT HAND

MASCHI A MACCHINA AL COBALTO “SINISTRI”, FILETTATURA METRICA ISO A PASSO FINE Machine taps, “left hand”, metric thread

10286

HSS-CO AISI M35 HV 820÷850

FORM B 4-5 Filetti Threads

R ≤ 850 N/mm2

Applicazioni Applications

Inox Stainless INOX

Acciaio Steel

Metalli Metals

Olio Oil

HSS-CO

DIN 374/B ISO 2/6H

pcs

cod.

10 12 14 19 22 20 24 22 22 22 22 22 22 22 22 25 25 34 25 25 25 34 25 25 34 28 28 28 28 28 28 28 28 28 28 28 28 30 30 30 30 30 30 30 32 32 32 32

63 70 80 80 90 90 100 100 100 100 100 100 100 100 100 110 110 125 125 125 125 140 125 125 140 140 140 140 140 140 140 140 140 150 150 150 150 160 170 170 170 170 170 170 180 190 190 190

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1028604X035 1028605X05 1028606X075 1028608X075 1028608X1 1028610X1 1028610X125 1028612X1 1028612X125 1028612X15 1028614X1 1028614X125 1028614X15 1028616X1 1028616X15 1028618X1 1028618X15 1028618X2 1028620X1 1028620X125 1028620X15 1028620X2 1028622X1 1028622X15 1028622X2 1028624X1 1028624X15 1028624X2 1028625X1 1028626X15 1028627X15 1028627X2 1028628X15 1028630X15 1028630X2 1028632X15 1028632X2 1028633X2 1028635X15 1028636X15 1028636X2 1028638X15 1028640X15 1028642X15 1028645X15 1028648X15 1028650X15 1028652X15

Sinistra Le hand

€ cad/each

82,106 82,106 82,106 82,106 82,106 91,422 91,422 127,646 127,646 127,646 155,247 155,247 155,247 180,088 180,088 215,620 215,620 215,620 236,320 236,320 236,320 236,320 296,694 296,694 296,694 346,715 346,715 346,715 346,715 346,715 434,689 434,689 434,689 496,787 496,787 614,084 614,084 614,084 614,084 769,331 769,331 814,178 886,628 990,124 1.172,969 1.414,465 1.638,709 1.811,205

Per fori in acciai con R≤850 N/mm2 ghisa malleabile, metalli non ferrosi a truciolo lungo, acciai resistenti al calore, acciai inox. For holes in steel with R≤850 N/mm2 malleable cast iron, non ferrous metal with long chips, stainless steel, heat resistant steel.

280

SINISTRI LEFT HAND

MASCHI A MACCHINA AL COBALTO “SINISTRI”, FILETTATURA METRICA ISO A PASSO FINE Machine taps, “left hand”, metric thread

10287

HSS-CO AISI M35 HV 820÷850

FORM C 2-3 Filetti Threads

R ≤ 850 N/mm2

Applicazioni Applications

Inox Stainless INOX

Acciaio Steel

Metalli Metals

Alluminio Aluminum Alu

Olio Oil

HSS-CO

DIN 374/C-35°

ISO 2/6H

pcs

cod.

10 12 14 19 22 20 24 22 22 22 22 22 22 22 22 25 25 34 25 25 25 34 25 25 34 28 28 28 28 28 28 28 28 28 28 28 28 30 30 30 30 30 30 30 32 32 32 32

63 70 80 80 90 90 100 100 100 100 100 100 100 100 100 110 110 125 125 125 125 140 125 125 140 140 140 140 140 140 140 140 140 150 150 150 150 160 170 170 170 170 170 170 180 190 190 190

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1028704X035 1028705X05 1028706X075 1028708X075 1028708X1 1028710X1 1028710X125 1028712X1 1028712X125 1028712X15 1028714X1 1028714X125 1028714X15 1028716X1 1028716X15 1028718X1 1028718X15 1028718X2 1028720X1 1028720X125 1028720X15 1028720X2 1028722X1 1028722X15 1028722X2 1028724X1 1028724X15 1028724X2 1028725X1 1028726X15 1028727X15 1028727X2 1028728X15 1028730X15 1028730X2 1028732X15 1028732X2 1028733X2 1028735X15 1028736X15 1028736X2 1028738X15 1028740X15 1028742X15 1028745X15 1028748X15 1028750X15 1028752X15

Sinistra Le hand

€ cad/each

91,422 91,422 91,422 91,422 91,422 110,397 110,397 141,446 141,446 141,446 172,496 172,496 172,496 198,371 198,371 244,944 244,944 244,944 274,269 274,269 274,269 274,269 331,191 331,191 331,191 396,740 396,740 396,740 396,740 396,740 479,538 479,538 479,538 545,085 545,085 679,633 679,633 679,633 679,633 855,579 855,579 896,978 976,328 1.103,972 1.297,167 1.545,561 1.800,855 1.976,801

281

MASCHI A MACCHINA AL COBALTO, FILETTATURA GAS CILINDRICA BSP Machine taps, BSP pipe-thread

10268

HSS-CO

DIN 5156/B

HSS-CO AISI M35 HV 820÷850

FORM B 4-5 Filetti Threads

R ≤ 850 N/mm2

BSP €

pcs

cod.

cad/each

1/8 x 28 1/4 x 19 3/8 x 19 1/2 x 14 5/8 x 14 3/4 x 14 7/8 x 14 1” x 11 1.1/8 x 11 1.1/4 x 11 1.3/8 x 11 1.1/2 x 11 1.3/4 x 11 2” x 11

20 22 22 25 25 28 28 30 30 30 32 32 32 40

90 100 100 125 125 140 150 160 170 170 180 190 190 220

7 11 12 16 18 20 22 25 28 32 36 36 40 45

1 1 1 1 1 1 1 1 1 1 1 1 1 1

102681/8 102681/4 102683/8 102681/2 102685/8 102683/4 102687/8 102681 102681.1/8 102681.1/4 102681.3/8 102681.1/2 102681.3/4 102682

33,255 43,405 53,732 79,880 91,894 127,775 138,205 185,091 296,071 381,820 542,938 613,449 765,537 859,389

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

10276

HSS-CO

HSS-CO AISI M35 HV 820÷850

FORM C 2-3 Filetti Threads

R ≤ 850 N/mm2

Applicazioni Applications

INOX

282

DIN 5156/C

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

BSP €

pcs

cod.

cad/each

1/8 x 28 1/4 x 19 3/8 x 19 1/2 x 14 5/8 x 14 3/4 x 14 7/8 x 14 1” x 11 1.1/8 x 11 1.1/4 x 11 1.3/8 x 11 1.1/2 x 11 1.3/4 x 11 2” x 11

20 22 22 25 25 28 28 30 30 30 32 32 32 40

90 100 100 125 125 140 150 160 170 170 180 190 190 220

7 11 12 16 18 20 22 25 28 32 36 36 40 45

1 1 1 1 1 1 1 1 1 1 1 1 1 1

102761/8 102761/4 102763/8 102761/2 102765/8 102763/4 102767/8 102761 102761.1/8 102761.1/4 102761.3/8 102761.1/2 102761.3/4 102762

36,083 45,319 56,654 79,911 90,943 117,778 146,357 190,502 265,263 353,688 511,435 544,019 694,485 752,498

MASCHI A MACCHINA AL COBALTO, FILETTATURA GAS CILINDRICA BSP Machine taps, BSP pipe-thread

10267

HSS-CO

BSP

DIN 5156/C-35°

HSS-CO AISI M35 HV 820÷850 FORM C 2-3 Filetti Threads

pcs

cod.

1/8 x 28 1/4 x 19 3/8 x 19 1/2 x 14 5/8 x 14 3/4 x 14 7/8 x 14 1” x 11 1.1/8 x 11 1.1/4 x 11 1.3/8 x 11 1.1/2 x 11 1.3/4 x 11 2” x 11

20 22 22 25 25 28 28 30 30 30 32 32 32 40

90 100 100 125 125 140 150 160 170 170 180 190 190 220

7 11 12 16 18 20 22 25 28 32 36 36 40 45

1 1 1 1 1 1 1 1 1 1 1 1 1 1

102671/8 102671/4 102673/8 102671/2 102675/8 102673/4 102677/8 102671 102671.1/8 102671.1/4 102671.3/8 102671.1/2 102671.3/4 102672

€ cad/each

41,150 63,288 81,292 133,329 152,952 200,932 242,524 271,794 413,533 500,707 727,677 769,972 1.107,688 1.213,480

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Alluminio Aluminum

10289

Olio Oil

Alu

HSS-CO

DIN 5156/C

HSS-CO AISI M35 HV 820÷850

BSP

Sinistra Le hand

€

pcs

cod.

cad/each

1/8 x 28 1/4 x 19 3/8 x 19 1/2 x 14 5/8 x 14 3/4 x 14 1” x 11

20 22 22 25 25 28 30

90 100 100 125 125 140 160

7,0 11,0 12,0 16,0 18,0 20,0 25,0

1 1 1 1 1 1 1

102891/8 102891/4 102893/8 102891/2 102895/8 102893/4 102891

46,647 58,428 73,044 101,996 117,372 151,204 220,400

FORM C 2-3 Filetti Threads

Per fori ciechi e passanti in acciai con R≤850 N/mm2 ghisa malleabile, metalli non ferrosi a truciolo lungo, acciai resistenti al calore, acciai inox.

R ≤ 850 N/mm2

For blind and through holes in steel with R≤850 N/mm2 malleable cast iron, non ferrous metal with long chips, stainless steel, heat resistant steel.

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

283

MASCHI A MACCHINA AL COBALTO CONICI PER TUBI, FILETTATURA GAS CONICA BSPT BSPT machine taps

10294

HSS-CO

HSS-CO AISI M35 HV 820÷850

FORM C

CONICITÀ 1:16 TAPER 1:16

R ≤ 850 N/mm2

Applicazioni Applications

INOX

284

BSPT - Conici

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

€

pcs

cod.

cad/each

1/8 x 28 1/4 x 19 3/8 x 19 1/2 x 14 3/4 x 14 1” x 11

20 22 22 28 28 38

90 100 100 125 140 160

7 11 12 16 20 25

1 1 1 1 1 1

102941/8 102941/4 102943/8 102941/2 102943/4 102941

50,776 63,621 79,304 111,420 165,408 237,666

MASCHI A MACCHINA AL COBALTO, FILETTATURA INGLESE WHITWORTH A PASSO GROSSO Machine taps, british standard thread

10265

HSS-CO

HSS-CO AISI M35 HV 820÷850

FORM B 4-5 Filetti Threads

ISO 2/6 H

DIN 371/B

BSW €

pcs

cod.

cad/each

BSW 1/8 x 40 5/32 x 32 3/16 x 24 1/4 x 20 5/16 x 18 3/8 x 16

5 6 9 10 12 14

56 63 70 90 90 100

3,5 4,5 5,5 7 8 10

1 1 1 1 1 1

102651/8 102655/32 102653/16 102651/4 102655/16 102653/8

22,480 22,480 23,070 23,070 28,417 31,909

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

10266

HSS-CO

HSS-CO AISI M35 HV 820÷850

FORM B 4-5 Filetti Threads

DIN 376/B

BSW €

pcs

cod.

cad/each

BSW 7/16 x 14 1/2 x 12 9/16 x 12 5/8 x 11 3/4 x 10 7/8 x 9 1” x 8 1.1/4 x 7 1.1/2 x 6

20 25 25 28 32 32 36 40 50

100 110 110 110 125 140 160 180 200

8 9 11 12 14 18 20 22 32

1 1 1 1 1 1 1 1 1

102667/16 102661/2 102669/16 102665/8 102663/4 102667/8 102661 102661.1/4 102661.1/2

38,195 38,559 56,990 56,990 118,092 133,381 151,570 225,049 481,845

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

285

MASCHI A MACCHINA AL COBALTO, FILETTATURA INGLESE WHITWORTH A PASSO GROSSO Machine taps, british standard thread

10274

HSS-CO

DIN 371/C-35°

HSS-CO AISI M35 HV 820÷850

FORM C 2-3 Filetti Threads

BSW €

pcs

cod.

cad/each

BSW 1/8 x 40 5/32 x 32 3/16 x 24 1/4 x 20 5/16 x 18 3/8 x 16

5 6 9 10 12 14

56 63 70 90 90 100

3,5 4,5 5,5 7 8 10

1 1 1 1 1 1

102741/8 102745/32 102743/16 102741/4 102745/16 102743/8

31,014 31,014 32,434 32,434 39,252 45,460

R ≤ 850 N/mm2

Applicazioni Applications

Acciaio Steel

Inox Stainless

INOX

Metalli Metals

10275

Olio Oil

Alluminio Aluminum Alu

HSS-CO

DIN 376/C-35°

HSS-CO AISI M35 HV 820÷850

FORM C 2-3 Filetti Threads

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Metalli Metals

286

Acciaio Steel

Inox Stainless

Alluminio Aluminum Alu

Olio Oil

BSW €

pcs

cod.

cad/each

BSW 7/16 x 14 1/2 x 12 9/16 x 12 5/8 x 11 3/4 x 10 7/8 x 9 1” x 8 1.1/4 x 7 1.1/2 x 6

20 25 25 28 32 32 36 40 50

100 110 110 110 125 140 160 180 200

8 9 11 12 14 18 20 22 32

1 1 1 1 1 1 1 1 1

102757/16 102751/2 102759/16 102755/8 102753/4 102757/8 102751 102751.1/4 102751.1/2

52,429 52,429 75,476 75,476 150,776 199,650 205,222 301,563 663,159

MASCHI A MACCHINA AL COBALTO CONICI PER TUBI, FILETTATURA AMERICANA NPT NPT machine taps

10293

HSS-CO

NPT - Conici

Ø NPT

HSS-CO AISI M35 HV 820÷850

FORM C

1/8 x 27 1/4 x 18 3/8 x 18 1/2 x 14 3/4 x 14 1” x 11,5

€

pcs

cod.

cad/each

20 22 22 28 28 38

90 100 100 125 140 160

7 11 12 16 20 25

1 1 1 1 1 1

102931/8 102931/4 102933/8 102931/2 102933/4 102931

50,776 63,621 79,304 111,420 165,408 237,666

CONICITÀ 1:16 TAPER 1:16

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

287

MASCHI A MACCHINA AL COBALTO CORTI PER TUBI, FILETTATURA CILINDRICA AMERICANA NPS Short machine taps for pipes

10308

HSS-CO

NPS

Ø NPS

HSS-CO AISI M35 HV 820÷850

FORM C 2-3 Filetti Threads

1/16 x 27 1/8 x 27 1/4 x 18 3/8 x 18 1/2 x 14 3/4 x 14 1” x 11,5

€

pcs

cod.

cad/each

17,5 19 28 28 35 35 45

54 55 62 65 80 85 95

1 1 1 1 1 1 1

103081/16 103081/8 103081/4 103083/8 103081/2 103083/4 103081

31,616 35,713 42,672 51,592 74,081 98,433 140,745

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

10309

HSS-CO

FORM C 35°

NPS

Ø NPS

HSS-CO AISI M35 HV 820÷850

FORM C 35° 2-3 Filetti Threads

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Metalli Metals

288

Acciaio Steel

Inox Stainless

Alluminio Aluminum Alu

Olio Oil

1/16 x 27 1/8 x 27 1/4 x 18 3/8 x 18 1/2 x 14 3/4 x 14 1” x 11,5

€

pcs

cod.

cad/each

17,5 19 28 28 35 35 45

54 55 62 65 80 85 95

1 1 1 1 1 1 1

103091/16 103091/8 103091/4 103093/8 103091/2 103093/4 103091

31,301 39,284 46,940 56,749 81,488 108,277 154,818

MASCHI A MACCHINA AL COBALTO CORTI PER TUBI, FILETTATURA CONICA AMERICANA NPTF Short machine taps for pipes

10306

HSS-CO

NPTF - Conici

NPTF

HSS-CO AISI M35 HV 820÷850

FORM B 4-5 Filetti Threads

€

pcs

cod.

cad/each

1/16 x 27 1/8 x 27 1/4 x 18 3/8 x 18 1/2 x 14 3/4 x 14 1” x 11,5

19 19 28 28 35 35 45

55 55 62 65 80 85 95

1 1 1 1 1 1 1

103061/16 103061/8 103061/4 103063/8 103061/2 103063/4 103061

39,514 39,890 41,983 47,040 74,081 98,433 140,752

d1 1:16 Conicità Taper

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

10307

HSS-CO

NPTF - Conici

NPTF

HSS-CO AISI M35 HV 820÷850

FORM C 2-3 Filetti Threads

€

pcs

cod.

cad/each

1/8 x 27 1/4 x 18 3/8 x 18 1/2 x 14 3/4 x 14 1” x 11,5

19 28 28 35 35 45

55 62 65 80 85 95

1 1 1 1 1 1

103071/8 103071/4 103073/8 103071/2 103073/4 103071

39,984 44,688 52,920 81,488 108,277 154,828

d1 1:16 Conicità Taper

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Acciaio Steel

Inox Stainless

Metalli Metals

Olio Oil

Alluminio Aluminum Alu

289

MASCHI A MACCHINA AL COBALTO CORTI ISO 529 FILETTATURA AMERICANA UN Short machine taps, American UN thread

10301

HSS-CO

HSS-CO AISI M35 HV 820÷850

FORM B 4-5 Filetti Threads

R ≤ 850 N/mm2

Applicazioni Applications

INOX

290

ISO 529-2B

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

8-UN

pcs

cod.

1.1/8 x 8 1.1/4 x 8 1.1/2 x 8 2” x 8 2.1/4 x 8 2.1/2 x 8

48 51 60 70 76 79

138 151 170 200 221 224

20,0 22,4 28,0 35,5 40,0 40,0

1 1 1 1 1 1

103011.1/8 103011.1/4 103011.1/2 103012 103012.1/4 103012.1/2

€ cad/each

172,649 201,667 330,006 690,570 1.365,872 1.986,164

MASCHI A MACCHINA AL COBALTO, FILETTATURA AMERICANA UNC A PASSO GROSSO HSS-CO TiAlN coated machine taps

10269

HSS-CO

ANSI B1 1

DIN 371/B

UNC

HSS-CO AISI M35 HV 820÷850

FORM B 4-5 Filetti Threads

UNC €

pcs

cod.

cad/each

6 x 32 8 x 32 10 x 24 12 x 24 1/4 x 20 5/16 x 18 3/8 x 16

12 13 15 16 17 20 22

56 63 70 70 80 90 100

4 4,5 6 6 7 8 9

1 1 1 1 1 1 1

10269NR06 10269NR08 10269NR10 10269NR12 102691/4 102695/16 102693/8

25,741 25,741 25,741 25,741 25,741 32,147 36,477

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

10270

HSS-CO

DIN 376/B

UNC

HSS-CO AISI M35 HV 820÷850

FORM B 4-5 Filetti Threads

UNC €

pcs

cod.

cad/each

7/16 x 14 1/2 x 13 9/16 x 12 5/8 x 11 3/4 x 10 7/8 x 9 1” x 8 1.1/4 x 7 1.1/2 x 6

22 25 26 27 30 32 36 40 50

100 110 110 110 125 140 160 180 200

8 9 11 12 14 18 20 22 32

1 1 1 1 1 1 1 1 1

102707/16 102701/2 102709/16 102705/8 102703/4 102707/8 102701 102701.1/4 102701.1/2

42,871 42,871 64,295 64,295 124,305 149,844 171,255 251,178 582,269

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

291

MASCHI A MACCHINA AL COBALTO, FILETTATURA AMERICANA UNC A PASSO GROSSO HSS-CO TiAlN coated machine taps

10271

HSS-CO

ANSI B1 1

DIN 371/C-35°

UNC

HSS-CO AISI M35 HV 820÷850

FORM C 4-5 Filetti Threads

UNC €

pcs

cod.

cad/each

6 x 32 8 x 32 10 x 24 12 x 24 1/4 x 20 5/16 x 18 3/8 x 16

7 8 10 10 13 14 16

56 63 70 70 80 90 100

4 4,5 6 6 7 8 9

1 1 1 1 1 1 1

10271NR06 10271NR08 10271NR10 10271NR12 102711/4 102715/16 102713/8

32,147 32,147 32,147 32,147 32,147 42,871 44,190

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Alluminio Aluminum

10272

Olio Oil

Alu

HSS-CO

UNC

HSS-CO AISI M35 HV 820÷850

FORM C 4-5 Filetti Threads

R ≤ 850 N/mm2

Applicazioni Applications

INOX

292

Inox Stainless

Acciaio Steel

Metalli Metals

Alluminio Aluminum Alu

UNC

DIN 376/C-35°

Olio Oil

€

pcs

cod.

cad/each

7/16 x 14 1/2 x 13 9/16 x 12 5/8 x 11 3/4 x 10 7/8 x 9 1” x 8 1.1/4 x 7 1.1/2 x 6

17 20 20 22 25 27 30 35 40

100 110 110 110 125 140 160 180 200

8 9 11 12 14 18 20 22 32

1 1 1 1 1 1 1 1 1

102727/16 102721/2 102729/16 102725/8 102723/4 102727/8 102721 102721.1/4 102721.1/2

53,595 53,595 77,152 77,152 154,125 204,085 209,783 308,263 677,896

MASCHI A MACCHINA AL COBALTO, FILETTATURA AMERICANA UNF A PASSO FINE Machine taps, american UNF thread

10282

HSS-CO

ANSI B1 1

DIN 371/B

UNF

HSS-CO AISI M35 HV 820÷850

FORM B 4-5 Filetti Threads

UNF €

pcs

cod.

cad/each

6 x 40 8 x 36 10 x 32 12 x 28 1/4 x 28 5/16 x 24 3/8 x 24

12 13 15 16 17 17 18

56 63 70 70 80 90 100

4 4,5 6 6 7 8 9

1 1 1 1 1 1 1

10282NR06 10282NR08 10282NR10 10282NR12 102821/4 102825/16 102823/8

25,803 25,803 25,803 25,803 25,803 32,663 35,996

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

10283

HSS-CO

DIN 376/B

UNF

HSS-CO AISI M35 HV 820÷850

FORM B 4-5 Filetti Threads

UNF €

pcs

cod.

cad/each

7/16 x 20 1/2 x 20 9/16 x 18 5/8 x 18 3/4 x 16 7/8 x 14 1” x 14 1.1/4 x 12 1.1/2 x 12

22 22 22 22 25 26 28 30 33

100 100 100 100 110 140 150 150 170

8 9 11 12 14 18 20 22 32

1 1 1 1 1 1 1 1 1

102837/16 102831/2 102839/16 102835/8 102833/4 102837/8 102831 102831.1/4 102831.1/2

41,492 41,492 63,528 63,528 124,391 149,461 166,590 234,242 541,594

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

293

MASCHI A MACCHINA AL COBALTO, FILETTATURA AMERICANA UNF A PASSO FINE Machine taps, american UNF thread

10284

HSS-CO

ANSI B1 1

DIN 371/C-35°

UNF

HSS-CO AISI M35 HV 820÷850

FORM C 2-3 Filetti Threads

UNF €

pcs

cod.

cad/each

6 x 40 8 x 36 10 x 32 12 x 28 1/4 x 28 5/16 x 24 3/8 x 24

7 8 10 10 10 10 10

56 63 70 70 80 90 100

4 4,5 6 6 7 8 9

1 1 1 1 1 1 1

10284NR06 10284NR08 10284NR10 10284NR12 102841/4 102845/16 102843/8

33,526 33,526 33,526 33,526 33,526 40,484 46,206

R ≤ 850 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Alluminio Aluminum

10285

Olio Oil

Alu

HSS-CO

DIN 376/C-35°

UNF

HSS-CO AISI M35 HV 820÷850

FORM C 2-3 Filetti Threads

R ≤ 850 N/mm2

Applicazioni Applications

INOX

294

Inox Stainless

Acciaio Steel

Metalli Metals

Alluminio Aluminum Alu

Olio Oil

UNF €

pcs

cod.

cad/each

7/16 x 20 1/2 x 20 9/16 x 18 5/8 x 18 3/4 x 16 7/8 x 14 1” x 14 1.1/4 x 12 1.1/2 x 12

13 13 15 15 17 17 20 22 25

100 100 100 100 110 140 150 150 170

8 9 11 12 14 18 20 22 32

1 1 1 1 1 1 1 1 1

102857/16 102851/2 102859/16 102855/8 102853/4 102857/8 102851 102851.1/4 102851.1/2

51,268 51,268 76,896 76,896 171,345 188,479 207,324 309,349 669,940

MASCHI A MACCHINA AL COBALTO CORTI ISO 529 FILETTATURA AMERICANA UNEF Short machine taps, American UNEF thread

10305

HSS-CO

ISO 529-2B

UNEF

HSS-CO AISI M35 HV 820÷850

FORM B 4-5 Filetti Threads

R ≤ 850 N/mm2

UNEF €

pcs

cod.

cad/each

1/4 x 32 5/16 x 32 3/8 x 32 1/2 x 28 9/16 x 24 5/8 x 24 3/4 x 20 7/8 x 20 1” x 20 1.1/16 x 18 1.1/8 x 18 1.1/4 x 18 1.1/2 x 18 1.3/4 x 18 2” x 18

19 23 24 29 30 32 37 38 45 48 48 51 60 67 70

66 75 80 89 95 102 112 118 130 138 138 151 170 187 200

6,3 10,0 10,0 9,0 11,2 12,5 14,0 16,0 18,0 20,0 20,0 22,4 28,0 31,5 35,5

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

103051/4 103055/16 103053/8 103051/2 103059/16 103055/8 103053/4 103057/8 103051 103051.1/16 103051.1/8 103051.1/4 103051.1/2 103051.3/4 103052

22,000 31,167 31,167 36,670 55,304 56,524 104,506 128,340 146,668 172,649 172,649 201,667 330,006 446,118 690,570

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

295

MASCHI A MACCHINA IN HSS, SCANALATURE DIRITTE, IMB. CORRETTO, FIL. METRICA ISO PASSO GROSSO Machine taps, spiral point, metric thread

10162

HSS-G

DIN 371/B ISO 2/6H

HSS-G AISI M2 HV 750 FORM B 4-5 Filetti Threads

M €

pcs

cod.

cad/each

2 x 0,4 2,5 x 0,45 3 x 0,5 3,5 x 0,6 4 x 0,7 5 x 0,8 6x1 7x1 8 x 1,25 10 x 1,5

8 9 11 13 13 16 19 19 22 24

45 50 56 56 63 70 80 80 90 100

2,8 2,8 3,5 4 4,5 6 6 7 8 10

1 1 1 1 1 1 1 1 1 1

1016202x04 10162025x045 1016203x05 10162035x06 1016204x07 1016205x08 1016206x1 1016207x1 1016208x125 1016210x15

17,769 17,769 12,279 20,303 12,393 12,667 12,992 18,211 15,708 18,211

R ≤ 850 N/mm2

Applicazioni

Art. 10240300

Art. 10240306

7 pcs M 3÷12

14 pcs M 3÷12 Ø 2,5 - 3,3 - 4,2 - 5 6,8 - 8,5 - 10,2

€ 99,420

Applications

Olio Oil

Acciaio Steel

€ 121,958

Metalli Metals

≤3Ø Art. 10163 Self Disponibile su richiesta On demand

10165

Per fori passanti in acciai con R ≤ 850 N/mm2, ghisa, metalli non ferrosi a truciolo lungo. For through holes in steel with R ≤ 850 N/mm2, cast iron, non ferrous metals with long chip

HSS-G

HSS-G AISI M2 HV 750 FORM B 4-5 Filetti Threads

Gambo cilindrico Ø ≤ M3 Round shank Ø ≤ M3

R ≤ 850 N/mm2

Applicazioni Applications

Acciaio Steel

DIN 376/B ISO 2/6H

Olio Oil

M €

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5 12 x 1,75 14 x 2 16 x 2 18 x 2,5 20 x 2,5 22 x 2,5 24 x 3 27 x 3 30 x 3,5 33 x 3,5 36 x 4 39 x 4 42 x 4,5 45 x 4,5 48 x 5 52 x 5

11 13 16 19 22 24 29 30 30 34 34 34 38 38 45 50 56 60 60 65 70 70

56 63 70 80 90 100 110 110 110 125 140 140 160 160 180 180 200 200 200 220 250 250

2,2 2,8 3,5 4,5 6 7 9 11 12 14 16 18 18 20 22 25 28 32 32 36 36 40

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1016503X05 1016504X07 1016505X08 1016506X1 1016508X125 1016510X15 1016512X175 1016514X2 1016516X2 1016518X25 1016520X25 1016522X25 1016524X3 1016527X3 1016530X35 1016533X35 1016536X4 1016539X4 1016542X45 1016545X45 1016548X5 1016552X5

13,618 13,981 14,370 14,645 15,745 18,476 21,591 27,138 33,056 45,360 47,713 60,600 72,336 141,340 170,582 249,915 251,812 321,669 362,283 422,395 513,369 573,479

Metalli Metals

≤3Ø Art. 10166 Self Disponibile su richiesta On demand

296

Per fori passanti in acciai con R ≤ 850 N/mm2, ghisa, metalli non ferrosi a truciolo lungo. For through holes in steel with R ≤ 850 N/mm2, cast iron, non ferrous metals with long chip

MASCHI A MACCHINA IN HSS, SCANALATURE DIRITTE, IMB. “C”, FIL. ISO PASSO GROSSO Machine taps, “C” chamfer form, metric thread

10168

HSS-G

DIN 371/C ISO 2/6H

HSS-G AISI M2 HV 750 FORM C 2-3 Filetti Threads

R ≤ 700 N/mm2

M €

pcs

cod.

cad/each

2 x 0,4 2,3 x 0,4 2,5 x 0,45 2,6 x 0,45 3 x 0,5 3,5 x 0,6 4 x 0,7 5 x 0,8 6x1 7x1 8 x 1,25 10 x 1,5

8 9 9 9 11 13 13 16 19 19 22 24

45 45 50 50 56 56 63 70 80 80 90 100

2,8 2,8 2,8 2,8 3,5 4 4,5 6 6 7 8 10

1 1 1 1 1 1 1 1 1 1 1 1

1016802X04 10168023X04 10168025X045 10168026X045 1016803X05 10168035X06 1016804X07 1016805X08 1016806X1 1016807X1 1016808X125 1016810X15

17,798 17,798 17,798 17,798 11,434 18,044 11,434 11,695 12,426 15,307 13,964 16,780

Applicazioni Applications

Per fori ciechi e passanti in acciai e ghisa con R 700≤ N/mm2

≤ 1,5 Ø Acciaio Steel

Olio Oil

For blind and trough holes in steel with R 700≤ N/mm2

Metalli Metals

10171

HSS-G

Gambo cilindrico Ø ≤ M3 Round shank Ø ≤ M3

FORM C 2-3 Filetti Threads

R ≤ 700 N/mm2

Applicazioni Applications

Acciaio Steel

DIN 376/C ISO 2/6 H

Olio Oil

M €

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5 12 x 1,75 14 x 2 16 x 2 18 x 2,5 20 x 2,5 22 x 2,5 24 x 3 27 x 3 30 x 3,5 33 x 3,5 36 x 4 39 x 4 42 x 4,5 45 x 4,5 48 x 5 52 x 5

11 13 16 19 22 24 29 30 32 34 34 34 38 38 45 50 56 60 60 65 70 70

56 63 70 80 90 100 110 110 110 125 140 140 160 160 180 180 200 200 200 220 250 250

2,2 2,8 3,5 4,5 6 7 9 11 12 14 16 18 18 20 22 25 28 32 32 36 36 40

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1017103X05 1017104X07 1017105X08 1017106X1 1017108X125 1017110X15 1017112X175 1017114X2 1017116X2 1017118X25 1017120X25 1017122X25 1017124X3 1017127X3 1017130X35 1017133X35 1017136X4 1017139X4 1017142X45 1017145X45 1017148X5 1017152X5

12,882 13,116 13,586 13,782 14,812 17,380 20,835 25,725 30,275 48,416 51,490 64,821 70,892 121,850 148,917 191,224 213,223 277,527 309,679 355,380 426,444 504,297

Metalli Metals

≤ 1,5 Ø

Per fori ciechi e passanti in acciai e ghisa con R 700≤ N/mm2 For blind and trough holes in steel with R 700≤ N/mm2

297

MASCHI A MACCHINA IN HSS, SCANALATURE DESTRE 15°, IMB. “C”, FIL.METRICA ISO PASSO GROSSO Machine taps, 15° spiral flute, metric thread

10174

HSS-G

DIN 371/C-15° ISO 2/6H

HSS-G AISI M2 HV 750

M €

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5

11 13 16 19 22 24

56 63 70 80 90 100

3,5 4,5 6 6 8 10

1 1 1 1 1 1

1017403X05 1017404X07 1017405X08 1017406X1 1017408X125 1017410X15

14,720 15,020 15,164 15,672 17,288 20,614

FORM C 2-3 Filetti Threads

Art. 10240311

Art. 10240312

7 pcs M 3÷12

14 pcs M 3÷12 Ø 2,5 3,3 4,2 5 6,8 - 8,5 - 10,2

€ 100,743

€ 124,606

R ≤ 700 N/mm2

≤ 1,5 Ø

Applicazioni Applications

Acciaio Steel

Olio Oil

Per fori ciechi in acciai con R≤ N/mm2, ghisa malleabile, metalli non ferrosi a truciolo lungo. For blind holes in steel with R≤ N/mm2, malleable cast iron, non ferrous metals with long chip.

Metalli Metals

10177

HSS-G

DIN 376/C-15° ISO 2/6H

HSS-G AISI M2 HV 750 Gambo cilindrico Ø ≤ M3 Round shank Ø ≤ M3

FORM C 2-3 Filetti Threads

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5 12 x 1,75 14 x 2 16 x 2 18 x 2,5 20 x 2,5 22 x 2,5 24 x 3

11 13 16 19 22 24 29 30 30 34 34 34 38

56 63 70 80 90 100 110 110 110 125 140 140 160

2,2 2,8 3,5 4,5 6 7 9 11 12 14 16 18 18

1 1 1 1 1 1 1 1 1 1 1 1 1

1017703X05 1017704X07 1017705X08 1017706X1 1017708X125 1017710X15 1017712X175 1017714X2 1017716X2 1017718X25 1017720X25 1017722X25 1017724X3

15,933 16,754 16,923 17,198 18,411 23,586 26,768 32,779 38,254 59,181 63,005 79,574 86,085

R ≤ 700 N/mm2

Applicazioni Applications

≤ 1,5 Ø Acciaio Steel

Metalli Metals

298

Olio Oil

€

Per fori ciechi in acciai con R≤ N/mm2, ghisa malleabile, metalli non ferrosi a truciolo lungo. For blind holes in steel with R≤ N/mm2, malleable cast iron, non ferrous metals with long chip.

MASCHI A MACCHINA IN HSS, SCANALATURE DESTRE 35°, IMB. “C”, FIL. METRICA ISO Machine taps, 35° spiral flute, metric coarse thread

10183

HSS-G

DIN 371/C-35° ISO 2/6H

HSS-G AISI M2 HV 750

FORM C 2-3 Filetti Threads

M €

pcs

cod.

cad/each

2 x 0,4 2,5 x 0,45 3 x 0,5 3,5 x 0,6 4 x 0,7 5 x 0,8 6x1 7x1 8 x 1,25 10 x 1,5

6 6 6 13 7 8 10 19 14 16

45 50 56 56 63 70 80 80 90 100

2,8 2,8 3,5 4 4,5 6 6 7 8 10

1 1 1 1 1 1 1 1 1 1

1018302X04 10183025X045 1018303X05 10183035X06 1018304X07 1018305X08 1018306X1 1018307X1 1018308X125 1018310X15

28,828 28,828 16,610 23,729 16,610 16,780 17,563 24,773 19,257 23,040

Art. 10240305

Art. 10240307

Art. 10240310

7 pcs M 3÷12

14 pcs M 3÷12 Ø 2,5 3,3 4,2 5 6,8 - 8,5 - 10,2

14 pcs DIN 371/ B+371/C 35°

€ 119,299

R ≤ 700 N/mm

€ 135,206

Applicazioni

€ 209,441

Applications

Acciaio Steel

10180

Metalli Metals

HSS-G

Alluminio Aluminum

DIN 376/C-35° ISO 2/6H

HSS-G AISI M2 HV 750

FORM C 2-3 Filetti Threads

R ≤ 700 N/mm2

Applicazioni Applications

Acciaio Steel

M €

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5 12 x 1,75 14 x 2 16 x 2 18 x 2,5 20 x 2,5 22 x 2,5 24 x 3 27 x 3 30 x 3,5 33 x 3,5 36 x 4 39 x 4 42 x 4,5 45 x 4,5 48 x 5 52 x 5

5 7 8 10 13 15 18 20 22 25 25 25 30 30 35 35 40 40 45 45 50 50

56 63 70 80 90 100 110 110 110 125 140 140 160 160 180 180 200 200 200 220 250 250

2,2 2,8 3,5 4,5 6 7 9 11 12 14 16 18 18 20 22 25 28 32 32 36 36 40

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1018003X05 1018004X07 1018005X08 1018006X1 1018008X125 1018010X15 1018012X175 1018014X2 1018016X2 1018018X25 1018020X25 1018022X25 1018024X3 1018027X3 1018030X35 1018033X35 1018036X4 1018039X4 1018042X45 1018045X45 1018048X5 1018052X5

18,462 18,462 18,708 19,034 20,170 25,203 29,350 37,172 45,229 59,506 72,285 88,720 96,537 144,266 175,289 280,140 304,290 392,196 459,816 513,912 568,008 676,200

Per fori ciechi in acciai con R≤ N/mm2 ghisa malleabile, metalli non ferrosi a truciolo lungo, acciai resistenti al calore, acciai inox.

Metalli Metals

≤3Ø Alluminio Aluminum

Olio Oil

Alu

For blind holes in steel with R≤ N/mm2 malleable cast iron, non ferrous metal with long chips, stainless steel, heat resistant steel.

Alu

Olio Oil

299

CORTI SHORT

MASCHI A MACCHINA IN HSS “CORTI” ISO 529 Short machine taps ISO 529

10172

HSS-G

ISO 529/B

M FORM B 4-5 Filetti Threads

Applicazioni

M - Corti €

pcs

cod.

cad/each

2 x 0,4 2,5 x 0,45 2,6 x 0,45 3 x 0,5 3,5 x 0,6 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5 12 x 1,75

8 9,5 9,5 11 13 13 16 19 22 24 29

41 44,5 44,5 48 50 53 58 66 72 80 89

2,5 2,8 2,9 3,15 3,55 4 5 6,3 8 10 9

1 1 1 1 1 1 1 1 1 1 1

1017202X04 10172025X045 10172026X045 1017203X05 10172035X06 1017204X07 1017205X08 1017206X1 1017208X125 1017210X15 1017212X175

19,256 19,256 19,256 11,384 12,144 11,384 13,471 13,471 15,549 19,703 26,930

Applications

Per fori passanti in acciai con R≤ N/mm2, ghisa, metalli non ferrosi a truciolo lungo. ≤ 3 Ø For through holes in steel with R≤ N/mm2, cast iron, non ferrous metals with long chip

Acciaio Steel

Metalli Metals

Art. 10240313

€ 108,466 7 pcs HSS M 3÷12

Olio Oil

10173

HSS-G

ISO 529/C 35°

FORM C 2-3 Filetti Threads

M - Corti

pcs

cod.

cad/each

2,5 x 0,45 2,6 x 0,45 3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5 12 x 1,75

9,5 9,5 11 13 16 19 22 24 29

44,5 44,5 48 53 58 66 72 80 89

2,8 2,9 3,15 4 5 6,3 8 10 9

1 1 1 1 1 1 1 1 1

10173025X045 10173026X045 1017303X05 1017304X07 1017305X08 1017306X1 1017308X125 1017310X15 1017312X175

25,312 25,312 16,018 16,018 16,629 16,629 18,705 24,408 33,162

Applicazioni Applications

Acciaio Steel

€

Per fori ciechi in acciai con R≤ N/mm2 ghisa malleabile, metalli non ferrosi a truciolo lungo, acciai resistenti al calore, acciai inox. ≤3Ø

For blind holes in steel with R≤ N/mm2 malleable cast iron, non ferrous metal with long chips, stainless steel, heat resistant steel.

Metalli Metals

Alluminio Aluminum Alu

Olio Oil

300

Art. 10240314

€ 124,827 7 pcs HSS M 3÷12

Combined bits for drilling-threading-deburring in one operation with 1/4” hexagon drive

10230

TiN

HSS-G

R ≤ 1200 N/mm2

3 x 0,5 4 x 0,7 5 x 0,8 6 x 1 8 x 1,25 10 x 1,5

2,5 3,3 4,2 5 6,8 8,5

36 39 41 44 50 59

€

pcs

cod.

cad/each

1 1 1 1 1 1

1023003x05 1023004x07 1023005x08 1023006x1 1023008x125 1023010x15

16,064 16,064 16,064 16,064 21,052 21,052

1/4 1/4 1/4 1/4 1/4 1/4

Applicazioni Applications

Alluminio Aluminum

Metalli Metals

Cu Zn Ni Ms

Alu

Leghe leggere Light alloys

10212

Plastica Plastic

HSS-G

M R ≤ 600 N/mm2

Applicazioni Applications

3 x 0,5 4 x 0,7 5 x 0,8 6 x 1 8 x 1,25 10 x 1,5

2,5 3,3 4,2 5 6,8 8,5

36 39 41 44 50 59

€

pcs

cod.

cad/each

1 1 1 1 1 1

1021203x05 1021204x07 1021205x08 1021206x1 1021208x125 1021210x15

11,030 11,030 11,030 11,030 12,583 12,583

1/4 1/4 1/4 1/4 1/4 1/4

Metalli Metals

Cu Zn Ni Ms

Leghe leggere Light alloys

Plastica Plastic

Attacco esagonale 1/4” per avvitatori, trapani a batteria, trapani portatili e stazionari reversibili 1/4 hex shank for battery powered screwdriver, reversible hand powered drills and stationary power drills

90°

Svasatore Deburrer

Art. 10213 Self Disponibile su richiesta On demand

Maschio filettatore Threading tap

Punta per preforo con affilatura auto-centrante Split point self-centering twist drill

Per forare, filettare e svasare in acciaio, alluminio, metalli non ferrosi in genere, plastica sino a R≤600 N/mm2 e profondità 1xD.

Drilling, threading and deburring in steel, aluminium, plastics with R≤600 N/mm2 and depth 1xD.

301

UTENSILI COMBINATI COMBINED DRILL TAP

UTENSILE COMBINATO IN HSS CON ATTACCO ESAGONALE 1/4” PER AVVITATORI E TRAPANI REVERSIBILI

MASCHI IN HSS CON ATTACCO ESAGONALE 1/4” PER FILETTARE CON AVVITATORI E TRAPANI REVERSIBILI Threading bits with 1/4” hex drive

10210

HSS-G

FORM B 4-5 Filetti Threads

R ≤ 700 N/mm2

3 x 0,5 4 x 0,7 5 x 0,8 6 x 1 8 x 1,25 10 x 1,5

11 12 15 18 19 21

33 35 36 39 40 41

€

pcs

cod.

cad/each

1 1 1 1 1 1

1021003x05 1021004x07 1021005x08 1021006x1 1021008x125 1021010x15

9,336 9,336 10,198 10,198 11,060 11,441

1/4 1/4 1/4 1/4 1/4 1/4

Applicazioni Applications

Acciaio Steel

Metalli Metals

Olio Oil

MASCHI A MACCHINA IN HSS, SCANALATURE DIRITTE, IMBOCCO “C”, FIL. METRICA ISO A PASSO FINE Machine taps, “C” chamfer form, metric fine thread

10198

HSS-CO AISI M35 HV 820÷850

FORM C 2-3 Filetti Threads

HSS-G

DIN 374/C-15° ISO 2/6H

MF €

pcs

cod.

cad/each

4 x 0,5 5 x 0,5 6 x 0,75 8x1 10 x 1 10 x 1,25 12 x 1 12 x 1,25 14 x 1,25 14 x 1,5 22 x 1,5 24 x 1,5 24 x 2

10 12 14 22 20 24 22 22 22 22 25 28 28

63 70 80 90 90 100 100 100 100 100 125 140 140

2,8 3,5 4,5 6,0 7,0 7,0 9,0 9,0 11,0 11,0 18,0 18,0 18,0

1 1 1 1 1 1 1 1 1 1 1 1 1

1019804X05 1019805X05 1019806X075 1019808X1 1019810X1 1019810X125 1019812X1 1019812X125 1019814X125 1019814X15 1019822X15 1019824X15 1019824X2

14,126 14,300 14,343 14,452 14,840 20,182 17,612 22,107 24,860 22,516 41,382 41,382 44,287

R ≤ 700 N/mm2

Applicazioni Applications

Acciaio Steel

≤ 1,5 Ø Per fori ciechi in acciai con R≤ N/mm2, ghisa malleabile, metalli non ferrosi a truciolo lungo.

Metalli Metals

Olio Oil

302

For blind holes in steel with R≤ N/mm2, malleable cast iron, non ferrous metals with long chip.

MASCHI A MACCHINA IN HSS, FILETTATURA GAS CILINDRICA BSP Machine taps, BSP pipe-thread

10204

HSS-G

DIN 374/C-15°

R ≤ 700 N/mm2

Applicazioni Applications

Acciaio Steel

BSP €

pcs

cod.

cad/each

1/8 x 28 1/4 x 19 3/8 x 19 3/4 x 14 1” x 11

20 22 22 28 30

90 100 100 140 160

7 11 12 20 25

1 1 1 1 1

102041/8 102041/4 102043/8 102043/4 102041

13,812 22,714 23,877 51,978 76,110

Metalli Metals

Olio Oil

MASCHI A MANO / MACCHINA IN HSS CONICI PER TUBI, FILETTATURA GAS CONICA BSPT BSPT taped thread taps

10139 Ø

HSS-G

BSPT - Conici

FORM C

CONICITÀ 1:16 TAPER 1:16

R ≤ 700 N/mm2

Applicazioni Applications

€

pcs

cod.

cad/each

1/8 x 28 1/4 x 19 3/8 x 19 1/2 x 14 3/4 x 14 1” x 11 1.1/4 x 11 1.1/2 x 11 2” x 11

15 19 21 26 28 33 36 37 41

59 67 75 87 96 109 119 125 140

1 1 1 1 1 1 1 1 1

101391/8 101391/4 101393/8 101391/2 101393/4 101391 101391.1/4 101391.1/2 101392

39,555 45,825 56,665 75,506 118,073 169,019 291,281 378,788 673,659

Acciaio Steel

Metalli Metals

Olio Oil

MASCHI A MANO / MACCHINA IN HSS CONICI PER TUBI, FILETTATURA AMERICANA NPT - BSPT NPT taper thread taps

10134 Ø

HSS-G

ANSI B 2 1

NPT - Conici

FORM C

NPT CONICITÀ 1:16 TAPER 1:16 R ≤ 700 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

pcs

cod.

1/16 x 27 1/8 x 27 1/4 x 18 3/8 x 18 1/2 x 14 3/4 x 14 1” x 11,5 1.1/4 x 11,5 1.1/2 x 11,5 2” x 11,5

19 19 27 27 35 35 44 44 44 44

54 54 62 65 79 83 95 102 108 114

1 1 1 1 1 1 1 1 1 1

101341/16 101341/8 101341/4 101343/8 101341/2 101343/4 101341 101341.1/4 101341.1/2 101342

€ cad/each

34,864 39,555 45,825 56,665 85,801 141,445 221,762 353,607 460,290 825,890

Olio Oil

303

304

UTENSILI A FILETTARE: MASCHI A MANO THREADING TOOLS: HAND TAPS

305

VISIONE D'INSIEME: MASCHI A MANO

INOX

STAINLESS STEEL

STEEL <1400 N/

ACCIAO <900 N/mm

STEEL < 00 N/

ACCIAO <700 N/mm

OTTONE

BRASS

ALLUMINIO E LEGHE

R≤N/mm²

COD.

1400

10147

308

3÷30

352

1200

10144

308

N ALL

IMAGE

/ALLO S

N° PEZZI

AO < 00 N/

STANDARD

N/mm

NORMA

352

HIOLE DIAMETER

3÷12

IMMAGINE

DIAMETRO FORO

N. OF PIECES

FEATURES

VAPO

SPECIALITÀ

THREAD

FILETTATURA

COATING

RIVESTIMENTO

MATERIAL

MATERIALE

Overview: hand taps

M HSS Co -

6÷24

2181

1200

10146

309

BSP

1/8÷1"

5157

1200

10148

309

TiN

3÷20

352

950

10155

311

1÷72

352

800

10100

310

FINITORE FINITORE

3÷30

352

800

10100

310

SINISTRI SINISTRI

3÷52

352

800

10102

311

2÷82

2181

800

10105

312

PER TUBI CONDUZIONE ELETTRICA PER TUBI CONDUZIONE ELETTRICA

12÷63

2181

800

10105

312

SINISTRI SINISTRI

6÷38

2181

800

10107

314

PER TUBI PER TUBI

1/8÷4"

5157

800

10115

315

SINISTRI SINISTRI

1/8÷2"

5157

800

10117

315

HSS-G

BSP -

BSPT

CONICI 1:16 CONICI 1:16

1/8÷2"

800

10139

303

BSF

3÷16÷1"

2181

800

10112

316

1/16÷2"

352

800

10110

317

SINISTRI SINISTRI

1/8÷1"

352

800

10111

317

CONICI 1:16 CONICI 1:16

1/16÷2" ANSI B2.1

800

10134

303

1÷2"

352

800

10120

319

SINISTRI SINISTRI

6 ÷ 1"

352

800

10122

319

BSW -

NPT

UNC -

306

ACCIAO <900 N/mm

STEEL < 00 N/

ACCIAO <700 N/mm

OTTONE

BRASS

ALLUMINIO E LEGHE

R≤N/mm²

COD.

800

10125

320

SINISTRI SINISTRI

10÷1"

2181

800

10127

320

40432

800

10136

321

ISO 1/4 H

800

10612

405

N ALL

IA A

INOX

IMAGE

/ALLO S

N° PEZZI

AO < 00 N/

STANDARD

N/mm

NORMA

STEEL <1400 N/

HIOLE DIAMETER

2181

STAINLESS STEEL

DIAMETRO FORO

0÷1.1/2

IMMAGINE

FEATURES

N. OF PIECES

SPECIALITÀ

THREAD

FILETTATURA

COATING

RIVESTIMENTO

MATERIAL

MATERIALE

UNF -

PER TUBI CONDUZIONE ELETTRICA PER TUBI CONDUZIONE ELETTRICA

M + MF

2÷36

BSP

1/8÷1"

800

10617

406

BSF

3/16÷1"

800

10616

406

BSW

1/8÷1"

800

10615

406

UNC

8÷1"

800

10613

406

UNF

8÷1"

800

10614

406

M + MF

COMBI - PER INSERTI FILETTATI - SPECIALE CANDELE COMBI - PER INSERTI FILETTATI - SPECIALE CANDELE

6÷18

800

10620

405

2÷36

4535

600

10001

322

FINITORE FINITORE

2÷16

4535

600

10001

322

PER FORI PASSANTI SPECIALI PER DADI PER FORI PASSANTI SPECIALI PER DADI

3÷12

357

600

10030

323

HSS-G

STI - PER INSERIMENTO INSERTI FILETTATI STI - PER INSERIMENTO INSERTI FILETTATI

M + MF

2÷30

4535

600

10003

324

FINITORE FINITORE

6÷18

4535

600

10003

324

BSP

PER TUBI PER TUBI

1/8÷2"

338

600

10015

326

BSPT

CONICI 1:16 CONICI 1:16

1/8÷2"

6125

600

10017

326

BSF

3/16÷1"

2709

600

10012

326

BSW

1/8÷2"

2709

600

10010

327

NPT

CONICI 1:16 CONICI 1:16

1/8÷2"

ANSI B2.1

600

10032

327

UNC

5÷1.1/2 ANSI B1.1

600

10020

328

UNF

5÷1.1/2 ANSI B1.1

600

10025

329

C.V.

307

VAPORIZZATI WITH COATING TREATMENT

MASCHI A MANO AL COBALTO SERIE DI 3 PEZZI, FILETTATURA METRICA ISO A PASSO GROSSO Hand taps, 3 pcs set, metric coarse ISO thread

10147

HRC

HSS-CO

VAPO

DIN 352 ISO 2/6H

64÷65

AISI M35

€

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5 12 x 1,75

11 13 16 19 22 24 29

40 45 50 56 63 70 75

1 1 1 1 1 1 1

1014703X05 1014704X07 1014705X08 1014706X1 1014708X125 1014710X15 1014712X175

61,012 61,012 64,836 64,836 72,483 97,289 131,007

R ≤ 1400 N/mm2

, increasing surface hardness

Applicazioni Applications

Olio Oil

Acciaio Steel

Inox Stainless

INOX

Alluminio Aluminum

Metalli Metals

Alu

3 Sbozzatore con guida Taper with guide

10144

HRC

HSS-CO

64÷65

AISI M35

R ≤ 1200 N/mm2

Applicazioni Applications

INOX

308

Acciaio Steel

Inox Stainless

Metalli Metals

DIN 352 ISO 2/6H

Alluminio Aluminum Alu

€

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5 12 x 1,75 14 x 2 16 x 2 18 x 2,5 20 x 2,5 22 x 2,5 24 x 3 27 x 3 30 x 3,5

11 13 14 16 18 24 29 30 32 40 40 40 50 50 56

40 45 50 56 63 70 75 80 80 95 95 100 110 110 125

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1014403X05 1014404X07 1014405X08 1014406X1 1014408X125 1014410X15 1014412X175 1014414X2 1014416X2 1014418X25 1014420X25 1014422X25 1014424X3 1014427X3 1014430X35

26,258 26,258 27,171 28,502 31,381 39,884 51,044 69,403 83,772 142,430 152,299 180,515 233,530 308,127 392,465

Olio Oil

Per filettature in acciai molto duri ed abrasivi, acciai inox, acciai resistenti al calore con R≤1200 N/mm2. For thread in stainless steel, heat-resistant steel, high alloy steel R≤1200 N/mm2.

MASCHI A MANO AL COBALTO SERIE DI 2 PEZZI, FILETTATURA METRICA ISO A PASSO FINE Hand taps, 2 pcs set, metric fine ISO thread

10146

HSS-CO

DIN 2181 ISO 2/6H

HRC 64÷65 AISI M35

R ≤ 1200 N/mm2

Applicazioni Applications

INOX

Acciaio Steel

Inox Stainless

Metalli Metals

Olio Oil

€

pcs

cod.

cad/each

6 x 0,75 8 x 0,75 8x1 10 x 1 10 x 1,25 12 x 1 12 x 1,25 12 x 1,5 14 x 1,25 14 x 1,5 16 x 1,5 18 x 1,5 18 x 2 20 x 1,5 20 x 2 22 x 1,5 22 x 2 24 x 1,5

14 19 22 20 24 22 22 22 22 22 22 22 22 22 22 22 22 22

50 50 56 63 70 70 70 70 70 70 70 80 80 80 80 80 80 90

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1014606x075 1014608x075 1014608x1 1014610x1 1014610x125 1014612x1 1014612x125 1014612x15 1014614x125 1014614x15 1014616x15 1014618x15 1014618x2 1014620x15 1014620x2 1014622x15 1014622x2 1014624x15

38,045 44,734 38,045 40,615 50,445 52,449 66,576 50,684 73,116 63,320 67,724 88,347 113,216 97,168 121,003 124,102 142,717 142,717

Alluminio Aluminum Alu

Per filettature in acciai molto duri ed abrasivi, acciai inox, acciai resistenti al calore con R≤1200 N/mm2. For thread in stainless steel, heat-resistant steel, high alloy steel R≤1200 N/mm2.

MASCHI A MANO AL COBALTO SERIE DI 2 PEZZI, FILETTATURA GAS CILINDRICA ISO 228 PER TUBI Hand taps, 2 pcs set, Wh pipe thread ISO 228

10148

HSS-CO

BSP (GAS)

DIN 5157

HRC 64÷65 AISI M35

€

pcs

cod.

cad/each

1/8 x 28 1/4 x 19 3/8 x 19 1/2 x 14 3/4 x 14 1” x 11

20 22 22 22 22 25

63 70 70 80 90 100

1 1 1 1 1 1

101481/8 101481/4 101483/8 101481/2 101483/4 101481

45,090 59,593 81,496 119,880 174,373 276,537

R ≤ 1200 N/mm2

Applicazioni Applications

INOX

Acciaio Steel

Inox Stainless

Metalli Metals

Olio Oil

Alluminio Aluminum Alu

309

MASCHI A MANO IN HSS SERIE DI 3 PEZZI, FILETTATURA METRICA ISO A PASSO GROSSO Hand taps, 3 pcs set, metric coarse ISO thread

10100

HSS-G

DIN 352 ISO 2/6H

HRC 63÷63,5 AISI M2

R ≤ 800 N/mm2

Applicazioni Applications

Alu

Acciaio Steel

Metalli Metals

Alluminio Aluminum

Olio Oil

Art. 10101 Self Disponibile su richiesta On demand

É buona norma, ad ogni rotazione del maschio (1), effettuare mezzo giro indietro (2) per rompere il truciolo Please rotate clockwise the tap (1) then rotate anticlockwise (2) to break the chip.

Per filettature in fori ciechi e passanti in acciaio da costruzione, acciai da bonifica, materiali metallici in genere sino a R≤800 N/mm2 For making threads in blind and through holes in structural steel, malleable cast iron, heat-treatable steel R≤800 N/mm2.

M Maschio a mano finitore Bottoming hand tap HSS-G DIN 352 III

310

€

pcs

cod.

1 x 0,25 1,1 x 0,25 1,2 x 0,25 1,4 x 0,3 1,6 x 0,35 1,7 x 0,35 1,8 x 0,35 2 x 0,4 2,2 x 0,45 2,3 x 0,4 2,5 x 0,45 2,6 x 0,45 3 x 0,5 3,5 x 0,6 4 x 0,7 4,5 x 0,75 5 x 0,8 5x1 5,5 x 0,9 6x1 7x1 8 x 1,25 9 x 1,25 10 x 1,5 11 x 1,5 12 x 1,75 13 x 1,75 14 x 2 15 x 2 16 x 2 18 x 2,5 20 x 2,5 22 x 2,5 24 x 3 27 x 3 28 x 3 30 x 3,5 33 x 3,5 36 x 4 39 x 4 42 x 4,5 45 x 4,5 48 x 5 52 x 5 56 x 5,5 60 x 5,5 64 x 6 68 x 6 72 x 6

8 8 8 10 10 10 10 10 11 11 12 12 11 14 13 16 16 16 18 19 19 22 22 24 24 28 28 30 32 32 34 34 34 38 38 38 45 50 56 56 63 63 68 68 85 85 90 90 90

32 32 32 32 32 32 32 36 36 36 40 40 40 45 45 50 50 56 50 56 56 63 63 70 70 75 75 80 80 80 95 95 100 110 110 110 125 132 150 150 160 160 180 180 200 200 220 220 240

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1010001X025 10100011X025 10100012X025 10100014X03 10100016X035 10100017X035 10100018X035 1010002X04 10100022X045 10100023X04 10100025X045 10100026X045 1010003X05 10100035X06 1010004X07 10100045X075 1010005X08 1010005X1 10100055x09 1010006X1 1010007X1 1010008X125 1010009X125 1010010X15 1010011X15 1010012X175 1010013X175 1010014X2 1010015x2 1010016X2 1010018X25 1010020X25 1010022X25 1010024X3 1010027X3 1010028X3 1010030X35 1010033X35 1010036X4 1010039X4 1010042X45 1010045X45 1010048X5 1010052X5 1010056X55 1010060X55 1010064X6 1010068X6 1010072X6

* Ø

pcs

cod.

cad/each

12 14 14 16 18 25 30 32 32 40 40

40 45 50 56 63 70 75 80 80 95 95

1 1 1 1 1 1 1 1 1 1 1

1010003X053 1010004X073 1010005X083 1010006X13 1010008X1253 1010010X153 1010012X1753 1010014X23 1010016X23 1010018X253 1010020X253

5,542 5,803 6,023 6,168 6,713 8,683 11,044 13,991 16,559 26,559 29,988

DIN 352

3 x 0,5 4 x 0,7 5 x 0,8 6x1 8 x 1,25 10 x 1,5 12 x 1,75 14 x 2 16 x 2 18 x 2,5 20 x 2,5

cad/each

132,559 132,559 132,559 132,559 132,559 132,559 132,559 23,326 31,358 31,358 26,038 27,642 16,585 24,030 17,406 30,641 18,097 33,600 48,568 18,515 25,099 20,131 32,505 26,050 45,935 33,143 86,001 41,956 86,027 49,690 83,446 90,095 104,696 120,605 170,671 205,714 230,654 277,912 325,368 517,337 539,835 624,727 874,330 899,714 1.116,892 1.415,860 1.499,055 1.666,871 4.041,847 €

MASCHI A MANO IN HSS CON RIVESTIMENTO AL TiN, SERIE DI 3 PEZZI, FILETTATURA METRICA ISO A PASSO GROSSO Titan coated hand taps, metric coarse ISO thread

10155

HSS-G

TiN

DIN 352 ISO 2/6H

HV 0,05 2500 AISI M2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

M €

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 4,5 x 0,75 5 x 0,8 6x1 8 x 1,25 10 x 1,5 12 x 1,75 14 x 2 16 x 2 18 x 2,5 20 x 2,5

12 14 16 16 18 22 25 30 32 32 40 40

40 45 50 50 56 63 70 75 80 80 95 95

1 1 1 1 1 1 1 1 1 1 1 1

1015503X05 1015504X07 10155045X075 1015505X08 1015506X1 1015508X125 1015510X15 1015512X175 1015514X2 1015516X2 1015518X25 1015520X25

36,802 29,868 29,868 30,467 31,091 48,449 53,367 69,859 87,913 95,769 135,582 178,391

Metalli Metals

Alluminio Aluminum Alu

SINISTRI LEFT HAND

Olio Oil

MASCHI A MANO IN HSS SERIE DI 3 PEZZI, FILETTATURA METRICA ISO SINISTRA A PASSO GROSSO Hand taps, 3 pcs set, metric coarse ISO thread

10102

HRC 63÷63,5 AISI M2

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Alluminio Aluminum Alu

HSS-G

DIN 352 ISO 2/6H

pcs

cod.

3 x 0,5 4 x 0,7 5 x 0,8 6x1 7x1 8 x 1,25 10 x 1,5 12 x 1,75 14 x 2 16 x 2 18 x 2,5 20 x 2,5 22 x 2,5 24 x 3 27 x 3 30 x 3,5 33 x 3,5 36 x 4 39 x 4 42 x 4,5 45 x 4,5 48 x 5 52 x 5

11 13 14 19 19 22 24 28 30 32 34 34 34 38 38 45 56 63 63 63 70 75 75

40 45 50 56 56 63 70 75 80 80 95 95 100 110 110 125 125 150 150 150 160 180 180

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1010203X05 1010204X07 1010205X08 1010206X1 1010207X1 1010208X125 1010210X15 1010212X175 1010214X2 1010216X2 1010218X25 1010220X25 1010222X25 1010224X3 1010227X3 1010230X35 1010233X35 1010236X4 1010239X4 1010242X45 1010245X45 1010248X5 1010252X5

Sinistra Le hand

€ cad/each

26,246 26,246 27,302 28,802 38,527 31,071 39,909 51,187 64,774 78,320 134,555 144,386 170,788 215,991 277,460 385,414 799,295 931,595 1.202,750 1.342,676 1.552,030 2.219,289 2.347,505

Olio Oil

311

MASCHI A MANO IN HSS SERIE DI 2 PEZZI, FILETTATURA METRICA ISO A PASSO FINE Hand taps, 3 pcs set, metric coarse ISO thread

10105

HSS-G

DIN 2181 ISO 2/6H Confezione

Packaging

HRC 63÷63,5 AISI M2

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Alluminio Aluminum Alu

Olio Oil

Ø M84 x 1,5 110 x 4

CONTINUA SULLA PAGINA SUCCESSIVA CONTINUED ON NEXT PAGE

A richiesta On demand

312

2 2,2 2,5 2,6 3 3,5 4 4 4,5 5 5 5,5 6 6 7 7 8 8 8 9 9 9 10 10 10 10 11 11 11 12 12 12 12 12 13 13 13 13 14 14 14 14 14 15 15 15 16 16 16 16 16 17 17 18 18 18 18 18 18 19 19 20 20 20 20 20 20

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

0,25 0,25 0,35 0,35 0,35 0,35 0,35 0,5 0,5 0,5 0,75 0,5 0,5 0,75 0,5 0,75 0,5 0,75 1 0,5 0,75 1 0,5 0,75 1 1,25 0,75 1 1,25 0,5 0,75 1 1,25 1,5 0,5 0,75 1 1,5 0,5 0,75 1 1,25 1,5 0,75 1 1,5 0,5 0,75 1 1,25 1,5 1 1,5 0,5 0,75 1 1,25 1,5 2 1 1,5 0,5 0,75 1 1,25 1,5 2

€

pcs

cod.

cad/each

8 9 9 9 9 10 10 10 12 12 12 12 14 14 14 14 19 19 22 19 19 20 20 20 20 24 20 20 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22

36 36 40 40 40 45 45 45 50 50 50 50 50 50 50 50 50 50 56 56 56 63 63 63 63 70 63 63 63 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 80 80 80 80 80 80 80 80 80 80 80 80 80 80

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1010502x025 10105022x025 10105025x035 10105026x035 1010503X035 10105035X035 1010504X035 1010504X05 10105045x05 1010505X05 1010505X075 10105055x05 1010506X05 1010506X075 1010507x05 1010507X075 1010508X05 1010508X075 1010508X1 1010509x05 1010509X075 1010509X1 1010510x05 1010510X075 1010510X1 1010510X125 1010511x075 1010511X1 1010511X125 1010512x05 1010512X075 1010512X1 1010512X125 1010512X15 1010513x05 1010513x075 1010513X1 1010513X15 1010514x05 1010514X075 1010514X1 1010514X125 1010514X15 1010515x075 1010515X1 1010515X15 1010516X05 1010516X075 1010516X1 1010516X125 1010516X15 1010517x1 1010517x15 1010518x05 1010518x075 1010518X1 1010518X125 1010518X15 1010518X2 1010519x1 1010519x15 1010520x05 1010520x075 1010520X1 1010520X125 1010520X15 1010520X2

42,517 42,517 40,901 40,901 24,041 24,041 27,497 19,752 40,901 21,018 45,022 40,901 40,901 21,995 40,901 26,115 52,519 26,729 22,986 45,126 37,967 35,113 45,829 35,464 30,457 25,099 58,946 39,282 40,714 58,946 36,180 36,102 31,797 28,906 90,955 90,955 62,506 62,506 90,955 44,018 40,470 40,470 34,409 100,968 67,694 67,694 100,968 100,968 45,126 42,439 36,663 109,287 109,287 109,287 109,287 66,273 66,273 54,291 68,893 137,409 137,409 137,409 137,409 91,659 83,940 59,936 73,797

MF Ø 21 21 22 22 22 22 22 22 23 23 24 24 24 24 24 24 25 25 26 26 26 27 27 27 28 28 28 29 30 30 30 30 30 32 32 32 32 33 33 33 34 34 34 35 35 35 36 36 36 36 37 38 38 38 38 39 39 39 40 40 40 40 42 42 42 42 44 44 45 45 45 45 46 48 48 48

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

1 1,5 0,5 0,75 1 1,25 1,5 2 1 1,5 0,5 0,75 1 1,25 1,5 2 1 1,5 1 1,5 2 1 1,5 2 1 1,5 2 1,5 1 1,5 2 2,5 3 1 1,5 2 3 1,5 2 3 1 1,5 2 1 1,5 2 1 1,5 2 3 1,5 1 1,5 2 3 1,5 2 3 1 1,5 2 3 1 1,5 2 3 1,5 2 1 1,5 2 3 1,5 1 1,5 2

pcs

cod.

22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 56 56 22 22 22 56 25 25 56 25 25 40 25 25 40 25 25 40 40 25 25 25 40 40 25 40 40 25 25 40 40 25 25 40 40 25 40 25 25 40 40 40 40 25 40

80 80 80 80 80 80 80 80 80 80 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 125 125 90 90 90 125 100 100 125 100 100 125 100 100 125 100 100 125 125 100 100 100 125 125 110 125 125 110 110 125 125 110 110 125 125 110 125 110 110 125 125 140 140 140 140

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1010521X1 1010521X15 1010522x05 1010522x075 1010522x1 1010522x125 1010522X15 1010522X2 1010523x1 1010523X15 1010524x05 1010524x075 1010524X1 1010524X125 1010524X15 1010524X2 1010525X1 1010525X15 1010526X1 1010526X15 1010526X2 1010527X1 1010527X15 1010527X2 1010528X1 1010528X15 1010528X2 1010529X15 1010530X1 1010530X15 1010530X2 1010530X25 1010530X3 1010532x1 1010532X15 1010532x2 1010532X3 1010533X15 1010533X2 1010533X3 1010534x1 1010534X15 1010534X2 1010535x1 1010535X15 1010535x2 1010536x1 1010536X15 1010536X2 1010536X3 1010537x15 1010538x1 1010538X15 1010538X2 1010538x3 1010539X15 1010539X2 1010539X3 1010540x1 1010540X15 1010540X2 1010540X3 1010542x1 1010542X15 1010542X2 1010542X3 1010544x15 1010544x2 1010545x1 1010545X15 1010545X2 1010545X3 1010546x15 1010548x1 1010548X15 1010548X2

€ cad/each

140,956 140,956 162,978 140,956 87,251 87,251 87,251 87,251 190,384 127,200 190,384 190,384 105,737 94,717 90,008 94,252 128,687 128,687 120,865 120,865 120,865 167,815 116,067 116,067 172,052 136,940 136,940 279,227 176,016 176,016 176,016 176,016 176,016 370,886 190,384 370,886 188,963 266,528 291,912 324,351 452,674 300,374 300,374 452,674 300,374 451,267 475,243 317,299 317,299 317,299 526,710 526,710 374,408 463,250 463,250 374,408 374,408 374,408 463,250 402,457 383,292 383,292 463,250 390,908 390,908 390,908 564,788 564,788 564,788 516,560 516,560 516,560 564,788 670,140 501,328 578,752

48 50 50 50 52 52 52 54 54 54 54 55 55 55 55 56 56 56 56 58 58 58 58 60 60 60 60 62 62 62 62 63 64 64 64 64 65 65 65 65 68 68 68 68 70 70 70 70 72 72 72 72 74 74 74 74 75 75 75 75 76 76 76 76 78 78 78 78 80 80 80 80 82 82 82 82

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

3 1,5 2 3 1,5 2 3 1,5 2 3 4 1,5 2 3 4 1,5 2 3 4 1,5 2 3 4 1,5 2 3 4 1,5 2 3 4 1,5 1,5 2 3 4 1,5 2 3 4 1,5 2 3 4 1,5 2 3 4 1,5 2 3 4 1,5 2 3 4 1,5 2 3 4 1,5 2 3 4 1,5 2 3 4 1,5 2 3 4 1,5 2 3 4

pcs

cod.

40 40 40 40 40 40 40 32 36 40 50 32 36 40 50 32 36 40 50 32 36 40 55 34 36 40 55 34 36 45 55 32 34 36 45 60 34 36 45 60 36 40 50 60 36 40 50 60 36 40 50 60 36 40 50 60 36 40 50 60 36 40 50 60 36 40 55 65 36 40 55 65 36 40 55 65

140 140 140 140 140 140 140 140 140 140 180 140 140 140 180 140 140 140 180 160 160 160 200 160 160 160 200 160 160 180 220 160 160 160 180 220 160 160 180 220 160 160 180 220 160 160 200 240 160 160 200 240 160 160 200 240 160 160 200 240 160 160 220 260 160 160 220 260 160 160 220 260 160 160 220 260

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1010548X3 1010550X15 1010550X2 1010550X3 1010552X15 1010552X2 1010552X3 1010554X15 1010554X2 1010554X3 1010554X4 1010555X15 1010555X2 1010555X3 1010555X4 1010556X15 1010556X2 1010556X3 1010556X4 1010558X15 1010558X2 1010558X3 1010558X4 1010560X15 1010560X2 1010560X3 1010560X4 1010562X15 1010562X2 1010562X3 1010562X4 1010563X15 1010564X15 1010564X2 1010564X3 1010564X4 1010565X15 1010565X2 1010565X3 1010565X4 1010568X15 1010568X2 1010568X3 1010568X4 1010570X15 1010570X2 1010570X3 1010570X4 1010572X15 1010572X2 1010572X3 1010572X4 1010574X15 1010574X2 1010574X3 1010574X4 1010575X15 1010575X2 1010575X3 1010575X4 1010576X15 1010576X2 1010576X3 1010576X4 1010578X15 1010578X2 1010578X3 1010578X4 1010580X15 1010580X2 1010580X3 1010580X4 1010582X15 1010582X2 1010582X3 1010582X4

€ cad/each

578,752 581,287 637,131 712,020 736,133 736,133 736,133 927,719 927,719 927,719 927,719 1.070,116 1.070,116 1.070,116 1.070,116 1.141,322 1.141,322 1.141,322 1.141,322 1.169,591 1.169,591 1.169,591 1.169,591 1.227,183 1.227,183 1.227,183 1.227,183 1.326,658 1.326,658 1.326,658 1.326,658 1.354,926 1.354,926 1.354,926 1.354,926 1.354,926 1.440,787 1.440,787 1.440,787 1.440,787 1.498,380 1.498,380 1.498,380 1.498,380 2.425,042 2.425,042 2.782,098 2.782,098 2.425,042 2.425,042 2.782,098 2.782,098 2.638,655 2.638,655 3.138,109 3.138,109 2.710,901 2.710,901 3.209,307 3.209,307 2.782,098 2.782,098 3.352,761 3.352,761 2.782,098 2.782,098 3.352,761 3.352,761 2.995,703 2.995,703 3.708,771 3.708,771 2.995,703 2.995,703 3.708,771 3.708,771 313

MASCHI A MANO IN HSS SERIE DI 2 PEZZI PER TUBI DI CONDUZIONE ELETTRICA,FILETTATURA METRICA ISO A PASSO FINE 2 pcs hand taps for cable connection

10105

HSS-G

DIN 2181 ISO 2/6H Confezione Packaging

HRC 63÷63,5 AISI M2

€

pcs

cod.

12 x 1,5 16 x 1,5 20 x 1,5 25 x 1,5 32 x 1,5 40 x 1,5 50 x 1,5 63 x 1,5

22 22 22 22 32 25 40 32

70 70 80 90 90 110 140 160

1 1 1 1 1 1 1 1

1010512x15 1010516x15 1010520x15 1010525x15 1010532x15 1010540x15 1010550x15 1010563x15

cad/each

28,906 36,663 59,936 128,687 190,384 402,457 581,287 1.354,926

Applicazioni Applications

Acciaio Steel

Per tubi di conduzione elettrica For electrical conduction tubes

SINISTRI LEFT HAND

Metalli Metals

MASCHI A MANO IN HSS SERIE DI 2 PEZZI, FILETTATURA METRICA SINISTRA A PASSO FINE Hand taps, metric fine ISO thread, left hand

10107

HRC 63÷63,5 AISI M2

R ≤ 900 N/mm2

Applicazioni Applications

Acciaio Steel Metalli Metals

Alluminio Aluminum Alu

Olio Oil

HSS-G

DIN 2181 ISO 2/6H

Sinistra Le hand

€

pcs

cod.

cad/each

6 x 0,75 8 x 0,75 8x1 10 x 1 10 x 1,25 12 x 1 12 x 1,25 12 x 1,5 14 x 1,25 14 x 1,5 16 x 1 16 x 1,5 18 x 1,5 20 x 1,5 22 x 1,5 24 x 1,5 24 x 2 30 x 1,5 30 x 2 38 x 1,5

14 19 22 20 24 22 22 22 22 22 22 22 22 22 22 22 22 22 22 25

50 50 56 63 70 70 70 70 70 70 70 70 80 80 80 90 90 90 90 100

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1010706X075 1010708X075 1010708X1 1010710X1 1010710X125 1010712X1 1010712X125 1010712X15 1010714X125 1010714X15 1010716X1 1010716X15 1010718X15 1010720X15 1010722X15 1010724X15 1010724X2 1010730X15 1010730X2 1010738X15

34,650 39,943 34,650 37,059 45,235 45,808 55,834 44,279 60,653 52,966 68,254 65,152 76,014 84,006 108,022 146,667 228,664 489,766 489,766 781,033

Per filettature in fori ciechi e passanti in acciaio da costruzione, acciai da bonifica, materiali metallici in genere sino a R≤800 N/mm2. For making threads in blind and through holes in structural steel, malleable cast iron, heattreatable steel R≤800 N/mm2.

314

MASCHI A MANO IN HSS SERIE DI 2 PEZZI, FILETTATURA GAS CILINDRICA ISO 228 PER TUBI Hand taps, 2 pcs set, Wh pipe thread ISO 228 HSS-G

DIN 5157

BSP (GAS)

HRC 63÷63,5 AISI M2

R ≤ 800 N/mm2

Applicazioni Applications

Alu

Acciaio Steel

Metalli Metals

Alluminio Aluminum

Olio Oil

pcs

cod.

1/8 x 28 1/4 x 19 3/8 x 19 1/2 x 14 5/8 x 14 3/4 x 14 7/8 x 14 1” x 11 1.1/8 x 11 1.1/4 x 11 1.3/8 x 11 1.1/2 x 11 1.5/8 x 11 1.3/4 x 11 2” x 11 2.1/4 x 11 2.1/2 x 11 2.3/4 x 11 3” x 11 3.1/2 x 11 4” x 11

20 22 22 22 22 22 22 25 40 40 40 40 40 40 40 40 40 40 40 45 45

63 70 70 80 80 90 90 100 125 125 140 140 140 140 160 160 160 160 160 180 180

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

101151/8 101151/4 101153/8 101151/2 101155/8 101153/4 101157/8 101151 101151.1/8 101151.1/4 101151.3/8 101151.1/2 101151.5/8 101151.3/4 101152 101152.1/4 101152.1/2 101152.3/4 101153 101153.1/2 101154

€ cad/each

37,289 49,140 61,710 88,660 106,914 131,191 170,631 207,308 339,867 339,867 455,505 455,505 791,133 664,206 664,206 1.541,365 1.624,562 2.166,091 2.473,520 3.500,150 4.000,778

SINISTRI LEFT HAND

10115

MASCHI A MANO IN HSS SERIE DI 2 PEZZI, FILETTATURA GAS SINISTRA CILINDRICA ISO 228 PER TUBI Hand taps, 2 pcs set, Wh pipe thread ISO 228

10117

HSS-G

DIN 5157

BSP (GAS)

HRC 63÷63,5 AISI M2

R ≤ 800 N/mm2

pcs

cod.

1/8 x 28 1/4 x 19 3/8 x 19 1/2 x 14 5/8 x 14 3/4 x 14 1” x 11 1.1/8 x 11 1.1/4 x 11 1.3/8 x 11 1.1/2 x 11 1.3/4 x 11 2” x 11

20 22 22 22 22 22 25 40 40 40 40 40 40

63 70 70 80 80 90 100 125 125 140 140 140 160

1 1 1 1 1 1 1 1 1 1 1 1 1

101171/8 101171/4 101173/8 101171/2 101175/8 101173/4 101171 101171.1/8 101171.1/4 101171.3/8 101171.1/2 101171.3/4 101172

Sinistra Le hand

€ cad/each

62,206 74,748 93,980 153,708 227,257 241,142 472,427 627,621 627,621 841,121 841,121 1.734,813 1.734,813

Applicazioni Applications

Alu

Acciaio Steel

Metalli Metals

Alluminio Aluminum

Olio Oil

315

MASCHI A MANO / MACCHINA IN HSS CONICI PER TUBI, FILETTATURA GAS CONICA BSPT BSPT taped thread taps

10139

HSS-G

BSPT - Conici

HRC 63÷63,5 AISI M2

FORM C

€

pcs

cod.

cad/each

1/8 x 28 1/4 x 19 3/8 x 19 1/2 x 14 3/4 x 14 1” x 11 1.1/4 x 11 1.1/2 x 11 2” x 11

15 19 21 26 28 33 36 37 41

59 67 75 87 96 109 119 125 140

1 1 1 1 1 1 1 1 1

101391/8 101391/4 101393/8 101391/2 101393/4 101391 101391.1/4 101391.1/2 101392

39,555 45,825 56,665 75,506 118,073 169,019 291,281 378,788 673,659

CONICITÀ 1:16 TAPER 1:16

R ≤ 900 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Alluminio Aluminum

Olio Oil

Alu

MASCHI A MANO IN HSS SERIE DI 2 PEZZI, FILETTATURA WHITWORTH A PASSO FINE BS 84 Hand taps, 2 pcs set, british standard fine thread

10112

HSS-G

DIN 2181

BSF

HRC 63÷63,5 AISI M2

BSF

pcs

cod.

3/16 x 32 1/4 x 26 5/16 x 22 3/8 x 20 7/16 x 18 1/2 x 16 9/16 x 16 5/8 x 14 3/4 x 12 7/8 x 11 1” x 10

14 18 22 22 22 24 28 28 32 36 40

50 50 56 63 63 75 80 80 95 100 110

1 1 1 1 1 1 1 1 1 1 1

101123/16 101121/4 101125/16 101123/8 101127/16 101121/2 101129/16 101125/8 101123/4 101127/8 101121

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

316

Metalli Metals

Alluminio Aluminum Alu

Olio Oil

€ cad/each

23,103 25,385 27,707 32,295 36,923 43,887 60,002 60,002 80,759 104,358 133,968

MASCHI A MANO IN HSS SERIE DI 3 PEZZI, FILETTATURA WHITWORTH A PASSO GROSSO BS 84 Hand taps, 3 pcs set, british standard thread

10110

HSS-G

DIN 352

BSW

HRC 63÷63,5 AISI M2

R ≤ 800 N/mm2

Applicazioni Applications

Alu

Acciaio Steel

Metalli Metals

Alluminio Aluminum

Olio Oil

BSW

pcs

cod.

1/16 x 60 3/32 x 48 1/8 x 40 5/32 x 32 3/16 x 24 7/32 x 24 1/4 x 20 5/16 x 18 3/8 x 16 7/16 x 14 1/2 x 12 9/16 x 12 5/8 x 11 11/16 x 11 3/4 x 10 7/8 x 9 1” x 8 1.1/8 x 7 1.1/4 x 7 1.3/8 x 6 1.1/2 x 6 1.5/8 x 5 1.3/4 x 5 1.7/8 x 4.1/2 2” x 4.1/2

10 10 12 14 18 18 19 22 24 24 29 30 32 32 40 40 50 56 56 63 63 70 70 80 80

36 36 40 45 50 50 50 63 70 70 75 80 80 80 95 100 110 132 132 150 150 160 160 190 190

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

101101/16 101103/32 101101/8 101105/32 101103/16 101107/32 101101/4 101105/16 101103/8 101107/16 101101/2 101109/16 101105/8 1011011/16 101103/4 101107/8 101101 101101.1/8 101101.1/4 101101.3/8 101101.1/2 101101.5/8 101101.3/4 101101.7/8 101102

€ cad/each

63,248 63,248 29,676 29,676 32,856 35,360 35,360 37,369 43,314 53,379 55,582 70,797 84,619 142,430 142,430 172,052 193,200 355,370 355,370 524,607 593,694 1.009,718 1.160,611 1.604,822 1.604,822

SINISTRI LEFT HAND

MASCHI A MANO IN HSS SERIE DI 3 PEZZI, FILETTATURA SINISTRA WHITWORTH A PASSO GROSSO BS 84 Hand taps, 3 pcs set, british standard thread, left hand

10111

HSS-G

DIN 352

BSW

HRC 63÷63,5 AISI M2

BSW

Sinistra Le hand

€

pcs

cod.

cad/each

1/8 x 40 5/32 x 32 3/16 x 24 1/4 x 20 5/16 x 18 3/8 x 16 7/16 x 14 1/2 x 12 9/16 x 12 5/8 x 11 3/4 x 10 7/8 x 9 1” x 8

12 14 18 22 25 28 30 32 32 36 40 45 50

40 45 50 56 63 70 75 80 80 90 105 110 110

1 1 1 1 1 1 1 1 1 1 1 1 1

101111/8 101115/32 101113/16 101111/4 101115/16 101113/8 101117/16 101111/2 101119/16 101115/8 101113/4 101117/8 101111

62,802 62,802 62,802 62,802 65,619 74,232 91,294 107,498 142,409 159,154 213,601 262,475 316,922

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Alluminio Aluminum

Olio Oil

Alu

317

MASCHI A MANO / MACCHINA IN HSS CONICI PER TUBI, FILETTATURA AMERICANA NPT NPT taper thread taps

10134

HRC 63÷63,5 AISI M2

FORM C

CONICITÀ 1:16 TAPER 1:16

R ≤ 900 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Alluminio Aluminum Alu

Olio Oil

318

HSS-G

NPT - Conici

ANSI B 2 1

NPT

pcs

cod.

1/16 x 27 1/8 x 27 1/4 x 18 3/8 x 18 1/2 x 14 3/4 x 14 1” x 11,5 1.1/4 x 11,5 1.1/2 x 11,5 2” x 11,5

19 19 27 27 35 35 44 44 44 44

54 54 62 65 79 83 95 102 108 114

1 1 1 1 1 1 1 1 1 1

101341/16 101341/8 101341/4 101343/8 101341/2 101343/4 101341 101341.1/4 101341.1/2 101342

€ cad/each

34,864 39,555 45,825 56,665 85,801 141,445 221,762 353,607 460,290 825,890

MASCHI A MANO IN HSS SERIE DI 3 PEZZI, FILETTATURA AMERICANA UNC A PASSO GROSSO

10120

nified Coarse Thread ( NC)

HSS-G

UNC

DIN 352

N°

HRC 63÷63,5 AISI M2

UNC R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Alluminio Aluminum

Olio Oil

Alu

pcs

cod.

1 x 64 2 x 56 3 x 48 4 x 40 5 x 40 6 x 32 8 x 32 10 x 24 12 x 24 1/4 x 20 5/16 x 18 3/8 x 16 7/16 x 14 1/2 x 13 9/16 x 12 5/8 x 11 3/4 x 10 7/8 x 12 1” x 8 1.1/8 x 7 1.1/4 x 7 1.3/8 x 6 1.1/2 x 6 1.5/8 x 5 1.3/4 x 5 1.7/8 x 4,5 2” x 4,5

10 11 11 12 12 14 14 16 18 19 22 24 24 29 30 32 40 40 50 56 56 63 63 70 70 80 80

32 36 36 40 40 45 45 50 50 50 63 70 70 75 80 80 95 100 110 132 132 150 150 160 160 190 190

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

10120N01 10120N02 10120N03 10120N04 10120N05 10120N06 10120N08 10120N10 10120N12 101201/4 101205/16 101203/8 101207/16 101201/2 101209/16 101205/8 101203/4 101207/8 101201 101201.1/8 101201.1/4 101201.3/8 101201.1/2 101201.5/8 101201.3/4 101201.7/8 101202

€ cad/each

40,954 40,954 34,629 31,507 31,507 30,380 30,380 30,380 30,380 32,598 32,598 39,898 44,591 61,019 71,076 76,450 119,937 151,925 199,485 314,763 432,800 713,286 713,286 1.081,348 1.081,348 1.510,335 1.510,335

SINISTRI LEFT HAND

Hand taps, 3 pcs set,

MASCHI A MANO IN HSS SERIE DI 3 PEZZI, FILETTATURA AMERICANA UNC SINISTRA nified Coarse Thread

10122

HSS-G

DIN 352

UNC

N°

HRC 63÷63,5 AISI M2

UNC

R ≤ 800 N/mm2

pcs

cod.

6 x 32 8 x 32 10 x 24 12 x 24 1/4 x 20 5/16 x 18 3/8 x 16 7/16 x 14 1/2 x 13 9/16 x 12 5/8 x 11 3/4 x 10 7/8 x 9 1” x 8

14 14 16 18 19 22 24 24 29 30 32 40 40 50

45 45 50 50 50 63 70 70 75 80 80 95 100 110

1 1 1 1 1 1 1 1 1 1 1 1 1 1

10122NR06 10122NR08 10122NR10 10122NR12 101221/4 101225/16 101223/8 101227/16 101221/2 101229/16 101225/8 101223/4 101227/8 101221

Sinistra Le hand

€ cad/each

90,509 90,509 90,509 90,509 57,330 60,366 70,362 85,468 102,569 133,754 150,788 201,080 251,361 301,655

Applicazioni Applications

Acciaio Steel

Metalli Metals

Alluminio Aluminum Alu

Olio Oil

319

MASCHI A MANO IN HSS SERIE DI 2 PEZZI, FILETTATURA AMERICANA UNF A PASSO FINE Hand taps, 2 pcs set, unified fine thread (UNF)

10125

HSS-G

DIN 2181

UNF

N°

HRC 63÷63,5 AISI M2

UNF

R ≤ 800 N/mm2

Applicazioni Applications

Alu

Acciaio Steel

Metalli Metals

Alluminio Aluminum

Olio Oil

€

pcs

cod.

cad/each

0 x 80 1 x 72 2 x 64 3 x 56 4 x 48 5 x 44 6 x 40 8 x 36 10 x 32 12 x 28 1/4 x 28 5/16 x 24 3/8 x 24 7/16 x 20 1/2 x 20 9/16 x 18 5/8 x 18 3/4 x 16 7/8 x 14 1” x 12 1” x 14 1.1/8 x 12 1.1/4 x 12 1.3/8 x 12 1.1/2 x 12

9 9 10 10 11 11 12 12 14 14 18 22 22 22 24 28 28 32 36 40 40 50 56 56 63

32 32 32 32 36 36 40 40 45 50 50 56 63 63 75 80 80 95 100 110 110 110 132 132 150

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

10125N00 10125N01 10125N02 10125N03 10125N04 10125N05 10125N06 10125N08 10125N10 10125N12 101251/4 101255/16 101253/8 101257/16 101251/2 101259/16 101255/8 101253/4 101257/8 10125112 10125114 101251.1/8 101251.1/4 101251.3/8 101251.1/2

45,313 42,044 42,044 36,765 35,461 34,159 27,342 27,342 27,342 27,342 29,418 29,418 31,882 37,808 44,721 62,182 68,716 85,860 109,154 138,337 229,724 312,216 389,641 640,944 640,944

SINISTRA LEFT HAND

* Filettatura UNS UNS thread

MASCHI A MANO IN HSS SERIE DI 2 PEZZI, FILETTATURA AMERICANA UNF SINISTRA

Hand taps, 2 pcs set, unified fine thread (UNF), left hand

10127

HSS-G

DIN 2181

N° UNF

HRC 63÷63,5 AISI M2

UNF

pcs

cod.

cad/each

10 x 32 1/4 x 28 5/16 x 24 3/8 x 24 7/16 x 20 1/2 x 20 9/16 x 18 5/8 x 18 3/4 x 16 7/8 x 14 1” x 12

14 18 22 22 22 24 28 28 32 36 40

45 50 56 63 63 75 80 80 95 100 110

1 1 1 1 1 1 1 1 1 1 1

10127NR10 101271/4 101275/16 101273/8 101277/16 101271/2 101279/16 101275/8 101273/4 101277/8 101271

67,929 42,999 45,256 52,818 64,148 76,926 100,316 113,173 150,891 188,584 226,278

Applicazioni Applications

320

Metalli Metals

Alu

Alluminio Aluminum

€

R ≤ 800 N/mm2

Acciaio Steel

Sinistra Le hand

Olio Oil

MASCHI A MANO IN HSS SERIE DI 2 PEZZI PER TUBI DI CONDUZIONE ELETTRICA 2 pcs hand taps for cable connection

10136

HRC 63÷63,5 AISI M2

Applicazioni Applications

Acciaio Steel

HSS-G

DIN 40432

pcs

cod.

7 x 20 9 x 18 11 x 18 13,5 x 18 16 x 18 21 x 16 29 x 16 36 x 16 42 x 16 48 x 16

22 22 22 22 22 22 25 40 40 40

70 70 80 80 80 90 100 140 140 160

1 1 1 1 1 1 1 1 1 1

1013607 1013609 1013611 10136135 1013616 1013621 1013629 1013636 1013642 1013648

€ cad/each

68,621 89,508 149,484 169,223 208,612 307,429 462,557 717,102 1.095,210 1.262,138

Per tubi di conduzione elettrica For electrical conduction tubes

Metalli Metals

321

MASCHI A MANO AL CV SERIE DI 3 PEZZI, FILETTATURA METRICA ISO A PASSO GROSSO Standard 3 pcs hand taps, metric coarse pitch

10001

UNI 4535

DIN 352

Confezione

Packaging

HRC 62÷63

R ≤ 600 N/mm2

Applicazioni Applications Cu Zn Ni Ms

Alu

Leghe leggere Light alloys

Metalli Metals

Alluminio Aluminum

Olio Oil

Art. 10002 Self Disponibile su richiesta On demand

2 2,5 3 3 3,5 4 4 4,5 5 5 6 7 8 9 10 11 12 14 16 18 20 22 24 27 30 33 36

x x x x x x x x x x x x x x x x x x x x x x x x x x x

0,4 0,45 0,5 0,6 0,6 0,7 0,75 0,75 0,8 0,9 1 1 1,25 1,25 1,5 1,5 1,75 2 2 2,5 2,5 2,5 3 3 3,5 3,5 4

pcs

cod.

cad/each

11 12 12 12 14 14 14 16 16 16 18 18 22 22 25 25 30 32 32 40 40 40 50 50 56 60 60

36 40 40 43 45 45 48 48 48 50 50 50 56 63 70 70 75 80 80 95 95 100 110 110 132 132 132

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1000102X04 10001025X045 1000103X05 1000103X06 10001035X06 1000104X07 1000104X075 10001045X075 1000105X08 1000105X09 1000106X1 1000107X1 1000108X125 1000109X125 1000110X15 1000111X15 1000112X175 1000114X2 1000116X2 1000118X25 1000120X25 1000122X25 1000124X3 1000127X3 1000130X35 1000133X35 1000136X4

7,625 9,065 5,117 7,079 7,079 5,117 7,581 7,581 5,394 6,064 5,394 7,102 6,822 9,564 9,097 12,072 11,448 14,828 18,137 23,276 28,694 34,826 41,359 93,204 124,195 147,105 162,778

MASCHIO FINITORE

HSS-G DIN 352 III

Per filettare fori passanti e ciechi in ferro, acciaio dolce ed a bassa resistenza sino R≤600 N/mm2 For making thread in iron, steel up to R≤600 N/mm2

322

bottoming tap

Maschio a mano finitore Bottoming hand tap

€

2 3 4 5 6 8 10 12 14 16

x x x x x x x x x x

0,4 0,5 0,7 0,8 1 1,25 1,5 1,75 2 2

€

pcs

cod.

cad/each

11 12 14 16 18 22 25 30 32 32

36 40 45 48 50 56 70 75 80 80

1 1 1 1 1 1 1 1 1 1

1000102X043 1000103X053 1000104X073 1000105X083 1000106X13 1000108X1253 1000110X153 1000112X1753 1000114X23 1000116X23

3,420 2,302 2,302 2,411 2,411 3,052 4,088 5,123 6,650 8,134

Standard 3 pcs hand taps, metric coarse pitch

10030

DIN 357

Ø M

3 4 5 6 8 10 12

x x x x x x x

0,5 0,7 0,8 1 1,25 1,5 1,75

€

pcs

cod.

cad/each

18 23 32 40 45 55 55

75 90 100 110 132 150 180

10 10 10 10 5 5 5

1003003X05 1003004X07 1003005X08 1003006X1 1003008X125 1003010X15 1003012X175

5,019 5,085 5,881 6,259 7,745 11,369 16,610

R ≤ 600 N/mm2

Applicazioni Applications Cu Zn Ni Ms

Leghe leggere Light alloys

Alu

Alluminio Aluminum

Metalli Metals

Olio Oil

323

SPECIALE PER DADI SPECIAL FOR NUTS

MASCHI A MACCHINA AL CV E A MANO PER FORI PASSANTI, SPECIALI PER DADI, FILETTATURA METRICA

MASCHI A MANO AL CV IN SERIE DI 2 PEZZI, FILETTATURA METRICA PASSO GROSSO E FINE Two pieces hand taps, coarse and fine pitch

10003

UNI 4535

DIN 2181

M - MF

Ø M

HRC 62÷63

R ≤ 600 N/mm2

Applicazioni Applications Cu Zn Ni Ms

Leghe leggere Light alloys

Alu

Alluminio Aluminum

Metalli Metals

Olio Oil

324

2 3 4 5 6 6 7 7 8 8 8 9 9 9 10 10 10 10 11 11 11 11 12 12 12 12 12 14 14 14 14 16 16 16 18 18 18 20 20 20 22 22 22 24 24 24 27 27 27 30 30

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

0,4 0,5 0,7 0,8 0,75 1 0,75 1 0,75 1 1,25 0,75 1 1,25 0,75 1 1,25 1,5 0,75 1 1,25 1,5 0,75 1 1,25 1,5 1,75 1 1,25 1,5 2 1 1,5 2 1,5 2 2,5 1,5 2 2,5 1,5 2 2,5 1,5 2 3 1,5 2 3 1,5 2

€

pcs

cod.

cad/each

11 12 14 16 18 18 18 18 22 22 22 22 22 22 25 25 25 25 25 25 25 25 30 30 30 30 30 32 32 32 32 32 32 32 40 40 40 40 40 40 40 40 40 50 50 50 50 50 50 56 56

36 40 45 48 50 50 50 50 56 56 56 63 63 63 70 70 70 70 70 70 70 70 75 75 75 75 75 80 80 80 80 80 80 80 95 95 95 95 95 95 100 100 100 110 110 110 110 110 110 132 132

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1000302X04 1000303X05 1000304X07 1000305X08 1000306X075 1000306X1 1000307X075 1000307X1 1000308X075 1000308X1 1000308X125 1000309X075 1000309X1 1000309X125 1000310X075 1000310X1 1000310X125 1000310X15 1000311X075 1000311X1 1000311X125 1000311X15 1000312X075 1000312X1 1000312X125 1000312X15 1000312X175 1000314X1 1000314X125 1000314X15 1000314X2 1000316X1 1000316X15 1000316X2 1000318X15 1000318X2 1000318X25 1000320X15 1000320X2 1000320X25 1000322X15 1000322X2 1000322X25 1000324X15 1000324X2 1000324X3 1000327X15 1000327X2 1000327X3 1000330X15 1000330X2

5,930 4,091 4,091 4,270 4,270 4,270 5,474 5,474 6,082 5,474 5,474 7,223 7,223 7,223 7,223 7,223 7,223 7,223 9,676 9,676 9,676 9,676 9,364 9,364 9,364 9,364 9,364 11,638 11,638 11,638 11,638 13,936 13,936 13,936 16,845 22,139 22,139 25,463 30,445 30,445 30,445 36,442 36,442 36,442 36,442 36,442 70,409 70,409 70,409 100,832 100,832

MASCHIO FINITORE

bottoming tap

Ø Maschio a mano finitore Bottoming hand tap HSS-G DIN 352 III

6 7 8 8 9 9 10 10 10 11 11 11 12 12 12 12 14 14 14 16 16 18

x x x x x x x x x x x x x x x x x x x x x x

0,75 0,75 0,75 1 0,75 1 0,75 1 1,25 0,75 1 1,25 0,75 1 1,25 1,5 1 1,25 1,5 1 1,5 1,5

€

pcs

cod.

cad/each

18 18 22 22 22 22 25 25 25 25 25 25 30 30 30 30 32 32 32 32 32 40

50 50 56 56 63 63 70 70 70 70 70 70 75 75 75 75 80 80 80 80 80 95

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1000306X0753 1000307X0753 1000308X0753 1000308X13 1000309X0753 1000309X13 1000310X0753 1000310X13 1000310X1253 1000311X0753 1000311X13 1000311X1253 1000312X0753 1000312X13 1000312X1253 1000312X153 1000314X13 1000314X1253 1000314X153 1000316X13 1000316X153 1000318X153

2,849 3,571 3,571 3,571 4,701 4,701 4,701 4,701 4,701 6,172 6,172 6,172 6,158 6,158 6,158 6,158 7,712 7,712 7,712 9,225 9,225 11,322

325

MASCHI A MANO AL CV SERIE DI 2 PEZZI, FILETTATURA GAS CILINDRICA ISO 228 PER TUBI Hand taps, 2 pcs set, Wh pipe thread ISO 228

10015

UNI 4535

DIN 5157

BSP (GAS)

R ≤ 600 N/mm2

Applicazioni Applications Cu Zn Ni Ms

Leghe leggere Light alloys

Metalli Metals

Alluminio Aluminum

1/8 1/4 3/8 1/2 3/4 1” 1.1/4 1.1/2 2”

x x x x x x x x x

28 19 19 14 14 11 11 11 11

€

pcs

cod.

cad/each

18 24 25 31 33 39 32 32 32

65 70 75 80 90 100 125 140 140

1 1 1 1 1 1 1 1 1

100151/8 100151/4 100153/8 100151/2 100153/4 100151 100151.1/4 100151.1/2 100152

8,064 10,653 13,303 20,264 34,917 58,400 114,575 194,254 411,288

Alu

Olio Oil

MASCHI CONICI AL CV PER TUBI, FILETTATURA GAS CONICA BSPT (CON 1 16) BSPT taper thread (1:16 taper)

10017

UNI 6125

BSPT - Conici

R ≤ 600 N/mm2

Applicazioni Applications Cu Zn Ni Ms

Leghe leggere Light alloys

Metalli Metals

1/8 1/4 3/8 1/2 3/4 1” 1.1/4 1.1/2 2”

x x x x x x x x x

28 19 19 14 14 11 11 11 11

€

pcs

cod.

cad/each

15 19 21 26 28 33 36 37 41

59 67 75 87 96 109 119 125 140

1 1 1 1 1 1 1 1 1

100171/8 100171/4 100173/8 100171/2 100173/4 100171 100171.1/4 100171.1/2 100172

10,824 16,264 19,240 23,399 68,000 98,455 151,921 221,849 332,781

Alluminio Aluminum Alu

Olio Oil

CONICITÀ 1:16 TAPER 1:16

MASCHI A MANO AL CV SERIE DI 2 PEZZI, FILETTATURA WHITWORTH A PASSO FINE 2 pcs hand taps, british standard fine

10012

UNI 2709

DIN 2181

R ≤ 600 N/mm2

Applicazioni Applications Cu Zn Ni Ms

Leghe leggere Light alloys

Metalli Metals

Alluminio Aluminum Alu

Olio Oil

326

BSF

Ø BSF

3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1”

x x x x x x x x x x x

32 26 22 20 18 16 16 14 12 11 10

€

pcs

cod.

cad/each

16 18 22 25 25 30 32 32 40 40 50

48 50 56 70 70 75 80 80 95 100 110

1 1 1 1 1 1 1 1 1 1 1

100123/16 100121/4 100125/16 100123/8 100127/16 100121/2 100129/16 100125/8 100123/4 100127/8 100121

5,413 5,834 6,230 7,072 8,312 10,305 11,643 13,563 18,456 22,740 36,132

MASCHI A MANO AL CV SERIE DI 3 PEZZI, FILETTATURA WHITWORTH PASSO GROSSO 3 pcs hand taps, Whitworth coarse thread

10010

UNI 2709

DIN 352

BSW

Ø BSW

R ≤ 600 N/mm2

Applicazioni Applications Cu Zn Ni Ms

Leghe leggere Light alloys

Metalli Metals

1/8 5/32 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1” 1.1/8 1.1/4 1.3/8 1.1/2 1.3/4 2”

x x x x x x x x x x x x x x x x x x x

40 32 24 20 18 16 14 12 12 11 10 9 8 7 7 6 6 5 4.5

€

pcs

cod.

cad/each

12 12 16 18 22 25 25 30 32 32 40 40 50 56 56 63 63 70 80

40 45 48 50 56 70 70 75 80 80 95 100 110 125 125 150 150 160 190

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

100101/8 100105/32 100103/16 100101/4 100105/16 100103/8 100107/16 100101/2 100109/16 100105/8 100103/4 100107/8 100101 100101.1/8 100101.1/4 100101.3/8 100101.1/2 100101.3/4 100102

6,774 6,774 6,774 7,655 8,014 9,688 11,395 14,059 15,793 18,418 25,120 34,373 49,355 108,083 114,734 156,748 265,266 356,367 531,868

Alluminio Aluminum Alu

Olio Oil

MASCHI CONICI AL CV PER TUBI, FILETTATURA CONICA AMERICANA NPT NPT taper thread /Tarauds conique NPT

10032

ANSI B2 1

NPT - Conici

NPT

CONICITÀ 1:16 TAPER 1:16

R ≤ 600 N/mm2

1/8 1/4 3/8 1/2 3/4 1” 1.1/4 1.1/2 2”

x x x x x x x x x

27 18 18 14 14 11,5 11,5 11,5 11,5

€

pcs

cod.

cad/each

19 27 27 35 35 44 44 44 44

54 62 65 79 83 95 102 108 114

1 1 1 1 1 1 1 1 1

100321/8 100321/4 100323/8 100321/2 100323/4 100321 100321.1/4 100321.1/2 100322

10,824 16,264 19,240 23,399 68,000 98,455 151,921 221,849 332,781

Applicazioni Applications Cu Zn Ni Ms

Leghe leggere Light alloys

Metalli Metals

Alluminio Aluminum Alu

Olio Oil

327

MASCHI A MANO AL CV SERIE 3 PEZZI, FILETTATURA AMERICANA A PASSO GROSSO UNC 3 pcs hand taps, UNC coarse pitch

10020

ANSI B1 1

UNC

Ø N°

UNC

R ≤ 600 N/mm2

Applicazioni Applications Cu Zn Ni Ms

Leghe leggere Light alloys

Metalli Metals

Alluminio Aluminum Alu

Olio Oil

328

5 6 8 10 12 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1” 1.1/8 1.1/4 1.3/8 1.1/2

x x x x x x x x x x x x x x x x x x x

40 32 32 24 24 20 18 16 14 13 12 11 10 9 8 7 7 6 6

pcs

cod.

18 18 18 30 30 30 30 35 40 45 45 47 50 60 60 60 60 65 65

50 50 50 70 70 70 70 75 80 85 90 100 110 120 130 130 130 150 150

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

10020N05 10020N06 10020N08 10020N10 10020N12 100201/4 100205/16 100203/8 100207/16 100201/2 100209/16 100205/8 100203/4 100207/8 100201 100201.1/8 100201.1/4 100201.3/8 100201.1/2

€ cad/each

11,482 11,482 11,482 11,482 11,482 11,482 13,006 14,295 18,505 24,079 29,221 33,914 46,139 55,445 74,903 128,866 159,424 223,734 318,849

MASCHI A MANO AL CV SERIE DI 2 PEZZI, FILETTATURA AMERICANA A PASSO FINE UNF 2 pcs hand taps,

10025

NF fine pitch

ANSI B1 1

UNF

Ø N°

UNF

R ≤ 600 N/mm2

Applicazioni Applications Cu Zn Ni Ms

Leghe leggere Light alloys

5 6 8 10 12 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1” 1.1/8 1.1/4 1.3/8 1.1/2

x x x x x x x x x x x x x x x x x x x

44 40 36 32 28 28 24 24 20 20 18 18 16 14 12 12 12 12 12

€

pcs

cod.

cad/each

11 12 12 14 14 30 30 35 40 45 45 47 50 60 60 60 60 65 65

36 40 40 45 50 70 70 75 80 85 90 100 110 120 130 130 130 150 150

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

10025N05 10025N06 10025N08 10025N10 10025N12 100251/4 100255/16 100253/8 100257/16 100251/2 100259/16 100255/8 100253/4 100257/8 100251 100251.1/8 100251.1/4 100251.3/8 100251.1/2

7,347 7,347 7,347 7,347 7,347 7,347 8,718 9,476 12,423 16,090 19,471 22,617 30,805 42,657 58,702 99,771 112,246 147,373 214,358

Metalli Metals

Alluminio Aluminum Alu

Olio Oil

329

330

UTENSILI A FILETTARE: FILIERE THREADING TOOLS: ROUND DIES

331

VISIONE D'INSIEME: FILIERE

INTERNAL DIAMETER

NORMA

INOX

STAINLESS STEEL

STEEL <

ACCIAO <900 N/mm

STEEL < 00 N/mm

ACCIAO <700 N/mm

OTTONE

BRASS

ALLUMINIO E LEGHE

R≤N/mm²

COD.

DIN 223

1200

12144

334

6÷24

DIN 223

1200

12146

334

BSP

1/8÷1"

DIN 5158

1200

12148

335

TiN

3÷20

DIN 223

950

12165

336

1÷72

DIN 223

800

12060

337

SINISTRA SINISTRA

2÷52

DIN 223

800

12062

338

TiN

NON A NORMA DIN NON A NORMA DIN

3÷12

950

12067

339

NON A NORMA DIN NON A NORMA DIN

2÷20

800

12066

339

ESAGONALI ESAGONALI

3÷68

DIN 382

800

12094

340

TiN

14÷22

DIN 223

950

12165

336

2,5÷82

DIN 223

800

12065

342

SINISTRA SINISTRA

3÷36

DIN 223

800

12072

344

800

12066

339

N ALL

IMAGE

/ALLO S

DIAMETRO INTERNO

3÷30

AO < 00 N/mm

FEATURES

N/mm

SPECIALITÀ -

THREAD

IMMAGINE

FILETTATURA

STANDARD

COATING

HSS Co

RIVESTIMENTO

MATERIAL

MATERIALE

Overview: round dies

HSS

MF -

NON A NORMA DIN NON A NORMA DIN

PER TUBI DI CONDUZIONE ELETTRICA PER TUBI DI CONDUZIONE ELETTRICA

12÷63

DIN 223

800

12069

346

ESAGONALI ESAGONALI

3÷20

DIN 382

800

12096

347

1/8÷4"

DIN 5158

800

12075

348

SINISTRA SINISTRA

1/8÷2"

DIN 5158

800

12077

348

ESAGONALI ESAGONALI

1/8÷2"

DIN 382

800

12098

349

CONICA 1:16 CONICA 1:16

1/8÷2"

352

800

12089

350

BSP

332

BSPT

ACCIAO <700 N/mm

OTTONE

BRASS

ALLUMINIO E LEGHE

R≤N/mm²

COD.

800

12070

351

SINISTRA SINISTRA

1/8÷1"

DIN 223

800

12088

351

CONICA 1:16 CONICA 1:16

1/16÷2"

800

12091

352

4÷2"

DIN 223

800

12080

352

SINISTRA SINISTRA

6÷1"

DIN 223

800

12082

353

2÷1.1/2

DIN 223

800

12085

353

SINISTRA SINISTRA

DIN 223

800

12086

354

1/4 ÷ 1.1/8

DIN 223

800

12079

354

13,5÷48 DIN 40434

800

12093

355

N ALL

STEEL <

INOX

IMAGE

STANDARD

/ALLO S

STEEL < 00 N/mm

DIN 223

AO < 00 N/mm

ACCIAO <900 N/mm

N/mm

3/16÷1"

STAINLESS STEEL

BSF

IMMAGINE

DIN 223

NORMA

1/16÷2"

INTERNAL DIAMETER

DIAMETRO INTERNO

350

FEATURES

12087

SPECIALITÀ

800

THREAD

FILETTATURA

COATING

RIVESTIMENTO

MATERIAL

MATERIALE

BSW -

NPT

UNC

HSS

UNF -

C.V.

UNEF

PER TUBI DI CONDUZIONE ELETTRICA PER TUBI DI CONDUZIONE ELETTRICA

2÷36

DIN 223

600

12001

356

6÷30

DIN 223

600

12005

357

BSP

1/8÷2"

DIN 223

600

12015

358

BSPT

CONICA 1:16 CONICA 1:16

1/8÷2"

DIN 223

600

12017

358

BSF

3/16÷1"

DIN 223

600

12012

359

BSW

1/8÷2"

DIN 223

600

12010

359

NPT

CONICA 1:16 CONICA 1:16

1/8÷2"

DIN 223

600

12032

360

UNC

5÷1.1/2

DIN 223

600

12020

360

UNF

5÷1.1/2

DIN 223

600

12025

361

333

FILIERE TONDE AL COBALTO A IMBOCCO CORRETTO, FILETTATURA METRICA ISO A PASSO GROSSO Round dies, spiral point, metric coarse thread

12144

HSS-CO

DIN 223 - EN 22568 6g

Ø M

HRC 63÷64 AISI M35 FORM B Imbocco corretto Spiral Point

3 4 5 6 8 10 12 14 16 18 20 22 24 27 30

x x x x x x x x x x x x x x x

0,5 0,7 0,8 1 1,25 1,5 1,75 2 2 2,5 2,5 2,5 3 3 3,5

M €

DxE

pcs

cod.

cad/each

20 x 5 20 x 5 20 x 7 20 x 7 25 x 9 30 x 11 38 x 14 38 x 14 45 x 18 45 x 18 45 x 18 55 x 22 55 x 22 65 x 25 65 x 25

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1214403X05 1214404X07 1214405X08 1214406X1 1214408X125 1214410X15 1214412X175 1214414X2 1214416X2 1214418X25 1214420X25 1214422X25 1214424X3 1214427X3 1214430X35

22,335 22,335 22,922 22,922 23,834 28,345 44,174 50,758 68,254 80,694 80,694 135,377 135,377 189,054 189,054

R ≤ 1200 N/mm2

Applicazioni Applications

Inox Stainless

INOX

Acciaio Steel

Metalli Metals

Olio Oil

FILIERE TONDE AL COBALTO A IMBOCCO CORRETTO, FILETTATURA METRICA ISO A PASSO FINE Round dies, spiral point, metric coarse thread

12146

HSS-CO

DIN 223 - EN 22568 6g

Ø M

HRC 63÷64 AISI M35 FORM B Imbocco corretto Spiral Point

R ≤ 1200 N/mm2

6 8 8 10 10 12 12 12 14 14 16 18 18 20 20 22 24

Applicazioni Applications

INOX

334

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

x x x x x x x x x x x x x x x x x

0,75 0,75 1 1 1,25 1 1,25 1,5 1,25 1,5 1,5 1,5 2 1,5 2 1,5 1,5

MF €

DxE

pcs

cod.

cad/each

20 x 7 25 x 9 25 x 9 30 x 11 30 x 11 38 x 10 38 x 10 38 x 10 38 x 10 38 x 10 45 x 14 45 x 14 45 x 14 45 x 14 45 x 14 55 x 16 55 x 16

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1214606X075 1214608X075 1214608X1 1214610X1 1214610X125 1214612X1 1214612X125 1214612X15 1214614X125 1214614X15 1214616X15 1214618X15 1214618X2 1214620X15 1214620X2 1214622X15 1214624X15

33,019 35,036 35,036 41,130 46,049 66,268 59,636 57,203 63,090 58,453 89,862 103,983 108,041 103,983 108,041 178,042 178,042

FILIERE TONDE AL COBALTO A IMBOCCO CORRETTO, FILETTATURA GAS CILINDRICA ISO 228

Spiral point round dies, spiral point, Whitworth pipe thread ISO 228

12148

HSS-CO

DIN 5158 - EN 24231

BSP (GAS)

Ø G

HRC 63÷64 AISI M35 FORM B Imbocco corretto Spiral Point

1/8 1/4 3/8 1/2 3/4 1”

x x x x x x

28 19 19 14 14 11

€

DxE

pcs

cod.

cad/each

30 x 11 38 x 10 45 x 14 45 x 14 55 x 16 65 x 18

1 1 1 1 1 1

121481/8 121481/4 121483/8 121481/2 121483/4 121481

56,189 63,018 90,940 90,940 121,725 196,570

R ≤ 1200 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

335

FILIERE TONDE IN HSS A IMBOCCO CORRETTO RIVESTITE AL TIN, FILETTATURA METRICA ISO A PASSO GROSSO TiN round dies, metric coarse thread

12165

HSS

TiN

DIN 223 - EN 22568 6g

Ø HV 0,05 AISI M2 FORM B

2500

336

Acciaio Steel

Metalli Metals

cad/each

0,5 0,7 0,8 1 1,25 1,5 1,75 2 2 2,5 2,5

20 x 5 20 x 5 20 x 7 20 x 7 25 x 9 30 x 11 38 x 14 38 x 14 45 x 18 45 x 18 45 x 18

1 1 1 1 1 1 1 1 1 1 1

1216503X05 1216504X07 1216505X08 1216506X1 1216508X125 1216510X15 1216512X175 1216514X2 1216516X2 1216518X25 1216520X25

22,047 22,047 22,518 22,518 25,467 30,692 44,443 48,887 58,017 67,381 67,381

14 16 18 22

x x x x

1,5 1,5 1,5 1,5

38 x 14 45 x 18 45 x 18 45 x 18

1 1 1 1

1216514X15 1216516X15 1216518X15 1216522X15

48,887 58,017 67,381 127,456

Applications

Inox Stainless

cod.

x x x x x x x x x x x

Applicazioni

INOX

pcs

3 4 5 6 8 10 12 14 16 18 20

R ≤ 950 N/mm2

€

DxE

Imbocco corretto Spiral Point

Olio Oil

FILIERE TONDE IN HSS A IMBOCCO CORRETTO, FILETTATURA METRICA ISO A PASSO GROSSO Round dies, metric coarse thread

12060

HSS

DIN 223 - EN 22568 6g

Ø M

HV 62÷63 AISI M2 FORM B Imbocco corretto Spiral Point

Confezione Packaging

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Alu

Alluminio Aluminum

Olio Oil

368

15037

369

15035

1 1,1 1,2 1,4 1,6 1,7 1,8 2 2,2 2,3 2,5 2,6 3 3,5 4 4,5 5 5,5 6 7 8 9 10 11 12 14 15 16 18 19 20 22 24 27 30 33 36 39 42 45 48 52 56 60 64 68 72

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

0,25 0,25 0,25 0,3 0,35 0,35 0,35 0,4 0,45 0,4 0,45 0,45 0,5 0,6 0,7 0,75 0,8 0,9 1 1 1,25 1,25 1,5 1,5 1,75 2 2 2 2,5 2,5 2,5 2,5 3 3 3,5 3,5 4 4 4,5 4,5 5 5 5,5 5,5 6 6 6

DxE

pcs

cod.

16 x 5 16 x 5 16 x 5 16 x 5 16 x 5 16 x 5 16 x 5 16 x 5 16 x 5 16 x 5 16 x 5 16 x 5 20 x 5 20 x 5 20 x 5 20 x 7 20 x 7 20 x 7 20 x 7 25 x 9 25 x 9 25 x 9 30 x 11 30 x 11 38 x 14 38 x 14 38 x 14 45 x 18 45 x 18 45 x 18 45 x 18 55 x 22 55 x 22 65 x 25 65 x 25 65 x 25 65 x 25 75 x 30 75 x 30 90 x 36 90 x 36 90 x 36 105 x 36 105 x 36 120 x 36 120 x 36 130 x 36

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1206001X025 12060011X025 12060012X025 12060014X03 12060016X035 12060017X035 12060018X035 1206002X04 12060022X045 12060023X04 12060025X045 12060026X045 1206003X05 12060035X06 1206004X07 12060045X075 1206005X08 12060055x09 1206006X1 1206007X1 1206008X125 1206009X125 1206010X15 1206011X15 1206012X175 1206014X2 1206015X2 1206016X2 1206018X25 1206019X25 1206020X25 1206022X25 1206024X3 1206027X3 1206030X35 1206033X35 1206036X4 1206039X4 1206042X45 1206045X45 1206048X5 1206052X5 1206056X55 1206060X55 1206064X6 1206068X6 1206072X6

€ cad/each

46,012 46,012 46,012 46,012 46,012 46,012 46,012 22,138 28,268 28,268 22,309 28,268 18,670 28,268 18,670 22,309 19,309 28,411 20,261 22,818 21,474 27,354 24,264 38,149 35,542 37,369 58,672 45,686 50,158 64,210 54,486 86,027 101,358 125,486 135,746 148,598 152,927 223,607 238,037 353,448 321,315 369,053 496,085 496,085 498,505 498,505 1.689,088

buona norma, ad ogni rotazione della filiera(1), effettuare mezzo giro indietro per rompere il truciolo(2) Please rotate clockwise the round die(1) then anticlockwise to break the chip(2)

Risultato: ottima finitura del filetto Result: good thread finishing

337

SINISTRE LEFT HAND

FILIERE TONDE IN HSS SINISTRE, FILETTATURA METRICA A PASSO GROSSO Round dies, metric coarse thread, left hand

12062

HSS

DIN 223 - EN 22568 6g

Ø M

HV 63÷64 AISI M35 FORM B Imbocco corretto Spiral Point

Confezione Packaging

1 pcs R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Alluminio Aluminum Alu

Olio Oil

338

2 3 4 5 6 7 8 10 12 14 16 18 20 22 24 27 30 33 36 39 42 45 48 52

x x x x x x x x x x x x x x x x x x x x x x x x

0,4 0,5 0,7 0,8 1 1 1,25 1,5 1,75 2 2 2,5 2,5 2,5 3 3 3,5 3,5 4 4 4,5 4,5 5 5

Sinistra Le hand

€

DxE

pcs

cod.

cad/each

16 x 5 20 x 5 20 x 5 20 x 7 20 x 7 25 x 9 25 x 9 30 x 11 38 x 14 38 x 14 45 x 18 45 x 18 45 x 18 55 x 22 55 x 22 65 x 25 65 x 25 65 x 25 65 x 25 75 x 30 75 x 30 90 x 36 90 x 36 90 x 36

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1206202X04 1206203X05 1206204X07 1206205X08 1206206X1 1206207X1 1206208X125 1206210X15 1206212X175 1206214X2 1206216X2 1206218X25 1206220X25 1206222X25 1206224X3 1206227X3 1206230X35 1206233X35 1206236X4 1206239X4 1206242X45 1206245X45 1206248X5 1206252X5

41,395 22,482 22,482 23,257 23,257 28,276 24,639 29,612 45,387 45,387 61,004 73,797 73,797 140,948 140,948 197,379 197,379 220,867 242,633 405,247 405,247 637,391 637,391 637,391

Round dies with special outside diameter

12067

TiN

HSS

M Filiere con Ø esterno speciale Round dies with special outside diameter

R ≤ 950 N/mm2

NON A NORMA DIN

M €

DxE

pcs

cod.

cad/each

3 x 0,5 4 x 0,7 5 x 0,8 6 x 1 8 x 1,25 10 x 1,5 12 x 1,75

25 x 9 25 x 9 25 x 9 25 x 9 25 x 9 25 x 9 25 x 9

1 1 1 1 1 1 1

12067203X05 12067204X07 12067205X08 12067206X1 12067208X125 12067210X15 12067212X175

16,423 16,423 16,423 16,423 16,861 16,861 17,462

Applicazioni Applications

Metalli Metals

Acciaio Steel

12066

HSS

Alluminio Aluminum

Olio Oil

Alu

6g NON A NORMA DIN

Ø M Filiere con Ø esterno speciale Round dies with special outside diameter

R ≤ 800 N/mm2

Applicazioni Applications

Alu

Acciaio Steel

Metalli Metals

Alluminio Aluminum

Olio Oil

2 3 4 5 6 7 8 10 12 10 12 14 16 18 20

x x x x x x x x x x x x x x x

0,4 0,5 0,7 0,8 1 1 1,25 1,5 1,75 1,5 1,75 2 2 2,5 2,5

M €

DxE

pcs

cod.

cad/each

25 x 9 25 x 9 25 x 9 25 x 9 25 x 9 25 x 9 25 x 9 25 x 9 25 x 9 38 x 14 38 x 14 38 x 14 38 x 14 38 x 14 38 x 14

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

12066202X04 12066203X05 12066204X07 12066205X08 12066206X1 12066207X1 12066208X125 12066210X15 12066212X175 12066310X15 12066312X175 12066314X2 12066316X2 12066318X25 12066320X25

29,479 12,994 12,994 12,994 12,994 12,994 12,994 12,994 15,409 22,037 26,556 26,556 26,556 30,544 30,544

339

DIAMETRO ESTERNO SPECIALE SPECIAL OUTSIDE DIAMETER

FILIERE TONDE IN HSS NON A NORMA DIN, FILETTATURA METRICA ISO A PASSO GROSSO

ESAGONALI EXAGONAL

FILIERE IN HSS ESAGONALI

Exagonal round dies

12094

HSS

DIN 382 6g

Ø M

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Alluminio Aluminum Alu

Olio Oil

3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 27 30 33 36 39 42 45 48 52 56 60 64 68

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

0,5 0,7 0,8 1 1 1,25 1,25 1,5 1,5 1,75 2 2 2,5 2,5 2,5 3 3 3,5 3,5 4 4 4,5 4,5 5 5 5,5 5,5 6 6

DxE

pcs

cod.

19 x 5 19 x 5 19 x 7 19 x 7 22 x 9 22 x 9 22 x 9 27 x 11 27 x 11 36 x 14 36 x 14 41 x 18 41 x 18 41 x 18 50 x 22 50 x 22 60 x 25 60 x 25 60 x 25 60 x 25 70 x 30 70 x 30 85 x 36 85 x 36 85 x 36 100 x 36 100 x 36 100 x 36 115 x 36

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1209403x05 1209404x07 1209405x08 1209406x1 1209407x1 1209408x125 1209409x125 1209410x15 1209411x15 1209412x175 1209414x2 1209416x2 1209418x25 1209420x25 1209422x25 1209424x3 1209427x3 1209430x35 1209433x35 1209436x4 1209439x4 1209442x45 1209445x45 1209448x5 1209452x5 1209456x55 1209460x55 1209464x6 1209468x6

€ cad/each

28,651 28,651 28,651 28,651 30,520 30,408 30,520 38,175 38,175 50,661 50,661 71,604 71,604 71,604 133,951 160,089 239,875 239,875 239,875 239,875 396,593 396,593 550,113 550,113 550,113 953,103 953,103 953,103 1.247,351

Per generare nuovi filetti e ripassare filettature danneggiate in punti di difficile accesso. To generate new threads and overhaul the damaged ones.

340

FILIERE TONDE IN HSS A IMBOCCO CORRETTO RIVESTITE AL TIN, FILETTATURA METRICA ISO A PASSO FINE TiN round dies, metric coarse thread

12165

HSS

TiN

DIN 223 - EN 22568 6g

Ø HV 0,05 AISI M2 FORM B

2500

Imbocco corretto Spiral Point

14 16 18 22

x x x x

1,5 1,5 1,5 1,5

MF €

DxE

pcs

cod.

cad/each

38 x 14 45 x 18 45 x 18 45 x 18

1 1 1 1

1216514x15 1216516x15 1216518x15 1216522x15

48,887 58,017 67,381 127,456

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Alluminio Aluminum Alu

Olio Oil

341

FILIERE TONDE IN HSS A IMBOCCO CORRETTO, FILETTATURA METRICA A PASSO FINE Round dies, spiral point, metric fine thread

12065

HSS

Ø M

HV 62÷63 AISI M2 FORM B Imbocco corretto Spiral Point

Confezione Packaging

1 pcs

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Alluminio Aluminum Alu

Olio Oil

È buona norma, ad ogni rotazione della filiera(1), effettuare mezzo giro indietro per rompere il truciolo(2) Please rotate clockwise the round die(1) then anticlockwise to break the chip(2)

Risultato: ottima finitura del filetto Result: good thread finishing

Ø M84 x 1,5 105 x 4 A richiesta On demand

342

DIN 223 - EN 22568 - 6g

2,5 2,6 3 3,5 4 4 4,5 5 5 5,5 6 6 7 7 8 8 8 9 9 9 10 10 10 10 11 11 12 12 12 12 12 13 13 13 13 14 14 14 14 14 15 15 15 16 16 16 16 16 17 17 18 18 18 18 18 18 19 19 20 20 20 20 20 20 21 21 22 22

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

0,35 0,35 0,35 0,35 0,35 0,5 0,5 0,5 0,75 0,5 0,5 0,75 0,5 0,75 0,5 0,75 1 0,5 0,75 1 0,5 0,75 1 1,25 1 1,25 0,5 0,75 1 1,25 1,5 0,5 0,75 1 1,5 0,5 0,75 1 1,25 1,5 0,75 1 1,5 0,5 0,75 1 1,25 1,5 1 1,5 0,5 0,75 1 1,25 1,5 2 1 1,5 0,5 0,75 1 1,25 1,5 2 1 1,5 0,5 0,75

€

DxE

pcs

cod.

cad/each

16 x 5 16 x 5 20 x 5 20 x 5 20 x 5 20 x 5 20 x 5 20 x 5 20 x 7 20 x 5 20 x 5 20 x 7 25 x 9 25 x 9 25 x 9 25 x 9 25 x 9 25 x 9 25 x 9 25 x 9 30 x 11 30 x 11 30 x 11 30 x 11 30 x 11 30 x 11 38 x 10 38 x 10 38 x 10 38 x 10 38 x 10 38 x 10 38 x 10 38 x 10 38 x 10 38 x 10 38 x 10 38 x 10 38 x 10 38 x 10 38 x 10 38 x 10 38 x 10 45 x 14 45 x 14 45 x 14 45 x 14 45 x 14 45 x 14 45 x 14 45 x 14 45 x 14 45 x 14 45 x 14 45 x 14 45 x 14 45 x 14 45 x 14 45 x 14 45 x 14 45 x 14 45 x 14 45 x 14 45 x 14 45 x 14 45 x 14 55 x 16 55 x 16

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

12065025X035 12065026X035 1206503X035 12065035X035 1206504X035 1206504X05 12065045X05 1206505X05 1206505X075 12065055X05 1206506X05 1206506X075 1206507X05 1206507X075 1206508X05 1206508X075 1206508X1 1206509X05 1206509X075 1206509X1 1206510X05 1206510X075 1206510X1 1206510X125 1206511X1 1206511X125 1206512X05 1206512X075 1206512X1 1206512X125 1206512X15 1206513X05 1206513X075 1206513X1 1206513X15 1206514X05 1206514X075 1206514X1 1206514X125 1206514X15 1206515X075 1206515X1 1206515X15 1206516X05 1206516X075 1206516X1 1206516X125 1206516X15 1206517X1 1206517X15 1206518X05 1206518X075 1206518X1 1206518X125 1206518X15 1206518X2 1206519X1 1206519X15 1206520X05 1206520X075 1206520X1 1206520X125 1206520X15 1206520X2 1206521X1 1206521X15 1206522X05 1206522X075

44,317 44,317 23,274 27,928 36,597 25,601 41,462 25,601 31,801 41,462 31,801 31,801 41,462 31,801 31,801 25,347 25,347 55,842 55,842 34,486 55,842 30,339 28,489 28,489 41,749 41,749 54,852 54,852 36,808 36,808 35,451 70,797 70,797 57,761 57,761 70,902 70,902 45,117 45,117 45,117 106,066 92,232 66,782 114,240 114,240 60,456 75,621 50,380 92,232 114,087 114,087 114,087 61,227 92,232 61,227 61,227 125,167 92,232 125,167 125,167 68,189 68,189 68,189 68,189 123,863 110,003 175,143 175,143

Ø M

22 22 22 22 23 23 24 24 24 24 24 24 25 25 25 26 26 26 27 27 27 28 28 28 29 30 30 30 30 30 32 32 32 32 33 33 33 34 34 34 35 35 35 36 36 36 36 37 38 38 38 38 39 39 39 40 40 40 40 42 42 42 42 44 44 45 45 45 45 46 48 48 48 48 50 50 50 52

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

1 1,25 1,5 2 1 1,5 0,5 0,75 1 1,25 1,5 2 1 1,5 2 1 1,5 2 1 1,5 2 1 1,5 2 1,5 1 1,5 2 2,5 3 1 1,5 2 3 1,5 2 3 1 1,5 2 1 1,5 2 1 1,5 2 3 1,5 1 1,5 2 3 1,5 2 3 1 1,5 2 3 1 1,5 2 3 1,5 2 1 1,5 2 3 1,5 1 1,5 2 3 1,5 2 3 1,5

€

DxE

pcs

cod.

cad/each

55 x 16 55 x 16 55 x 16 55 x 16 55 x 16 55 x 16 55 x 16 55 x 16 55 x 16 55 x 16 55 x 16 55 x 16 55 x 16 55 x 16 55 x 16 55 x 16 55 x 16 55 x 16 65 x 18 65 x 18 65 x 18 65 x 18 65 x 18 65 x 18 65 x 18 65 x 18 65 x 18 65 x 18 65 x 18 65 x 25 65 x 18 65 x 18 65 x 18 65 x 25 65 x 18 65 x 18 65 x 25 65 x 18 65 x 18 65 x 18 65 x 18 65 x 18 65 x 18 65 x 18 65 x 18 65 x 18 65 x 25 65 x 18 75 x 20 75 x 20 75 x 20 75 x 30 75 x 20 75 x 20 75 x 30 75 x 20 75 x 20 75 x 20 75 x 30 75 x 20 75 x 20 75 x 20 75 x 30 90 x 22 90 x 22 90 x 22 90 x 22 90 x 22 90 x 36 90 x 22 90 x 22 90 x 22 90 x 22 90 x 36 90 x 22 90 x 22 90 x 36 90 x 22

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1206522X1 1206522X125 1206522X15 1206522X2 1206523X1 1206523X15 1206524X05 1206524X075 1206524X1 1206524X125 1206524X15 1206524X2 1206525X1 1206525X15 1206525X2 1206526X1 1206526X15 1206526X2 1206527X1 1206527X15 1206527X2 1206528X1 1206528X15 1206528X2 1206529X15 1206530X1 1206530X15 1206530X2 1206530X25 1206530X3 1206532X1 1206532X15 1206532X2 1206532X3 1206533X15 1206533X2 1206533X3 1206534X1 1206534X15 1206534X2 1206535X1 1206535X15 1206535X2 1206536X1 1206536X15 1206536X2 1206536X3 1206537X15 1206538X1 1206538X15 1206538X2 1206538X3 1206539X15 1206539X2 1206539X3 1206540X1 1206540X15 1206540X2 1206540X3 1206542X1 1206542X15 1206542X2 1206542X3 1206544X15 1206544X2 1206545X1 1206545X15 1206545X2 1206545X3 1206546X15 1206548X1 1206548X15 1206548X2 1206548X3 1206550X15 1206550X2 1206550X3 1206552X15

101,828 101,828 95,179 95,179 197,998 197,998 197,998 197,998 103,654 103,654 103,654 103,654 143,837 143,837 133,016 179,719 179,719 179,719 203,396 203,396 203,396 203,396 203,396 203,396 203,396 203,396 203,396 203,396 203,396 203,396 270,764 201,441 201,441 201,441 229,864 229,864 229,864 270,764 229,864 229,864 270,764 241,142 270,764 270,764 241,142 241,142 241,142 470,471 470,471 334,168 334,168 448,972 332,858 332,858 332,858 448,972 332,858 332,858 332,858 448,972 332,858 332,858 332,858 727,654 727,654 727,654 534,131 534,131 534,131 727,654 727,654 534,131 534,131 534,131 534,131 534,131 534,131 534,131

Ø 52 52 54 54 54 54 54 55 55 55 55 56 56 56 56 56 58 58 58 58 58 60 60 60 60 62 62 62 62 63 64 64 64 64 65 65 65 65 68 68 68 68 70 70 70 70 72 72 72 72 74 74 74 74 75 75 75 75 76 76 76 76 78 78 78 78 80 80 80 80 82 82 82 82 82 82 82 82

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

2 3 1 1,5 2 3 4 1,5 2 3 4 1 1,5 2 3 4 1 1,5 2 3 4 1,5 2 3 4 1,5 2 3 4 1,5 1,5 2 3 4 1,5 2 3 4 1,5 2 3 4 1,5 2 3 4 1,5 2 3 4 1,5 2 3 4 1,5 2 3 4 1,5 2 3 4 1,5 2 3 4 1,5 2 3 4 1,5 2 3 4 1,5 2 3 4

DxE

pcs

cod.

90 x 22 90 x 36 105 x 22 105 x 22 105 x 22 105 x 36 105 x 36 105 x 22 105 x 22 105 x 36 105 x 36 105 x 22 105 x 22 105 x 22 105 x 36 105 x 36 105 x 22 105 x 22 105 x 22 105 x 36 105 x 36 105 x 22 105 x 22 105 x 36 105 x 36 105 x 22 105 x 22 105 x 36 105 x 36 105 x 22 120 x 22 120 x 22 120 x 36 120 x 36 120 x 22 120 x 22 120 x 36 120 x 36 120 x 22 120 x 22 120 x 36 120 x 36 120 x 22 120 x 22 120 x 36 120 x 36 120 x 22 120 x 22 120 x 36 120 x 36 120 x 22 120 x 22 120 x 36 120 x 36 120 x 22 120 x 22 120 x 36 120 x 36 120 x 22 120 x 22 120 x 36 120 x 36 120 x 22 120 x 22 120 x 36 120 x 36 120 x 22 120 x 22 120 x 36 120 x 36 130 x 25 130 x 25 130 x 36 130 x 36 130 x 25 130 x 25 130 x 36 130 x 36

1 1 1

1206552X2 1206552X3 1206554X1 1206554X15 1206554X2 1206554X3 1206554X4 1206555X15 1206555X2 1206555X3 1206555X4 1206556X1 1206556X15 1206556X2 1206556X3 1206556X4 1206558X1 1206558X15 1206558X2 1206558X3 1206558X4 1206560X15 1206560X2 1206560X3 1206560X4 1206562X15 1206562X2 1206562X3 1206562X4 1206563X15 1206564X15 1206564X2 1206564X3 1206564X4 1206565X15 1206565X2 1206565X3 1206565X4 1206568X15 1206568X2 1206568X3 1206568X4 1206570X15 1206570X2 1206570X3 1206570X4 1206572X15 1206572X2 1206572X3 1206572X4 1206574X15 1206574X2 1206574X3 1206574X4 1206575X15 1206575X2 1206575X3 1206575X4 1206576X15 1206576X2 1206576X3 1206576X4 1206578X15 1206578X2 1206578X3 1206578X4 1206580X15 1206580X2 1206580X3 1206580X4 1206582X15 1206582X2 1206582X3 1206582X4 1206582X15 1206582X2 1206582X3 1206582X4

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

€ cad/each

534,131 534,131 983,102 1.033,460 1.033,460 1.033,460 1.033,460 1.033,460 1.033,460 1.033,460 1.033,460 1.033,460 1.033,460 1.033,460 1.033,460 1.033,460 1.033,460 1.033,460 1.033,460 1.033,460 1.033,460 1.033,460 1.033,460 1.033,460 1.033,460 1.033,460 1.033,460 1.033,460 1.033,460 1.033,460 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.184,289 1.484,615 1.484,615 1.484,615 1.484,615 1.484,615 1.484,615 1.484,615 1.484,615 343

SINISTRE LEFT HAND

FILIERE TONDE IN HSS SINISTRE, FILETTATURA METRICA A PASSO FINE

Round dies, spiral point, metric fine thread

12072

HSS

DIN 223 - EN 22568 6g

Ø M

HV 62÷63 AISI M35 FORM B Imbocco corretto Spiral Point

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Alluminio Aluminum Alu

Olio Oil

Ø M3 x 1,5 48 x 3 A richiesta On demand

344

3 4 4,5 5 5,5 6 6 7 7 8 8 9 10 10 12 12 12 13 14 14 14 15 16 16 16 18 18 18 18 20 20 20 22 22 22 23 24 24 24 25 25 26 26 27 27 28 28 30 30 30 30 32 32 32 33 33 33 34 34 35 35 36 36 36

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

0,35 0,5 0,5 0,75 0,5 0,5 0,75 0,5 0,75 0,75 1 0,5 1 1,25 1 1,25 1,5 1,5 1 1,25 1,5 1,5 1 1,25 1,5 1 1,25 1,5 2 1,25 1,5 2 1,25 1,5 2 1,5 1,25 1,5 2 1,5 2 1,5 2 1,5 2 1,5 2 1,5 2 2,5 3 1,5 2 3 1,5 2 3 1,5 2 1,5 2 1,5 2 3

Sinistra Le hand

€

DxE

pcs

cod.

cad/each

20 x 5 20 x 5 20 x 5 20 x 7 20 x 5 20 x 5 20 x 7 25 x 9 25 x 9 25 x 9 25 x 9 25 x 9 30 x 11 30 x 11 38 x 10 38 x 10 38 x 10 38 x 10 38 x 10 38 x 10 38 x 10 38 x 10 45 x 14 45 x 14 45 x 14 45 x 14 45 x 14 45 x 14 45 x 14 45 x 14 45 x 14 45 x 14 55 x 16 55 x 16 55 x 16 55 x 16 55 x 16 55 x 16 55 x 16 55 x 16 55 x 16 55 x 16 55 x 16 65 x 18 65 x 18 65 x 18 65 x 18 65 x 18 65 x 18 65 x 18 65 x 25 65 x 18 65 x 18 65 x 25 65 x 18 65 x 18 65 x 18 65 x 18 65 x 18 65 x 25 65 x 18 65 x 18 65 x 18 65 x 18

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1207203X035 1207204X05 12072045X05 1207205X075 12072055X05 1207206X05 1207206X075 1207207X05 1207207X075 1207208X075 1207208X1 1207209X05 1207210X1 1207210X125 1207212X1 1207212X125 1207212X15 1207213X15 1207214X1 1207214X125 1207214X15 1207215X15 1207216X1 1207216X125 1207216X15 1207218X1 1207218X125 1207218X15 1207218X2 1207220X125 1207220X15 1207220X2 1207222X125 1207222X15 1207222X2 1207223X15 1207224X125 1207224X15 1207224X2 1207225X15 1207225X2 1207226X15 1207226X2 1207227X15 1207227X2 1207228X15 1207228X2 1207230X15 1207230X2 1207230X25 1207230X3 1207232X15 1207232X2 1207232X3 1207233X15 1207233X2 1207233X3 1207234X15 1207234X2 1207235X15 1207235X2 1207236X15 1207236X2 1207236X3

43,543 43,543 43,543 43,543 43,543 43,543 43,543 46,222 46,222 46,222 46,222 54,274 54,274 54,274 64,731 71,408 68,644 75,688 75,688 75,688 69,965 107,857 107,857 107,857 107,857 117,254 117,254 117,254 117,254 117,254 117,254 117,254 177,057 177,057 177,057 177,057 177,057 177,057 177,057 177,057 177,057 220,928 220,928 220,928 220,928 220,928 220,928 315,264 315,264 315,264 315,264 315,264 315,264 315,264 331,027 331,027 331,027 339,516 339,516 339,516 339,516 339,516 339,516 339,516

NPRound dies with special outside diameter

12066

HSS

6g NON A NORMA DIN

MF Filiere con Ø esterno speciale Round dies with special outside diameter R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Alluminio Aluminum

Olio Oil

MF €

DxE

pcs

cod.

cad/each

8 x 1 10 x 1 10 x 1,25 12 x 1,25 12 x 1,5 14 x 1,25 14 x 1,5 16 x 1,5 18 x 1,5

25 x 9 38 x 14 38 x 14 38 x 14 38 x 14 38 x 14 38 x 14 38 x 14 38 x 14

1 1 1 1 1 1 1 1 1

12066208X1 12066310X1 12066310X125 12066312X125 12066312X15 12066314X125 12066314X15 12066316X15 12066318X15

12,671 22,059 22,059 26,556 26,556 26,556 26,556 26,556 30,544

Alu

345

DIAMETRO ESTERNO SPECIALE SPECIAL OUTSIDE DIAMETER

FILIERE TONDE IN HSS NON A NORMA DIN, FILETTATURA METRICA ISO A PASSO FINE

FILIERE TONDE IN HSS, FILETTATURA METRICA A PASSO FINE PER TUBI DI CONDUZIONE ELETTRICA Round dies, metric fine thread for cables connections

12069

HSS

HV 62÷63 AISI M2 FORM B Imbocco corretto Spiral Point

DIN 223 - EN 22568 6g

DxE

pcs

cod.

12 x 1,5 16 x 1,5 20 x 1,5 25 x 1,5 32 x 1,5 40 x 1,5 50 x 1,5 63 x 1,5

38 x 10 45 x 14 45 x 14 55 x 16 65 x 18 75 x 20 90 x 22 105 x 22

1 1 1 1 1 1 1 1

1206912X15 1206916X15 1206920X15 1206925X15 1206932X15 1206940X15 1206950X15 1206963X15

€ cad/each

32,971 46,853 60,396 133,767 187,339 332,858 534,131 1.033,460

R ≤ 800 N/mm2

Applicazioni Applications

INOX

Inox Stainless

Acciaio Steel

Metalli Metals

Olio Oil

346

Per tubi di conduzione elettrica For electrical conduction tubes

ESAGONALI EXAGONAL

FILIERE ESAGONALI IN HSS, FILETTAURA METRICA ISO A PASSO FINE Exagonal round dies, metric fine thread

12096

HSS

DIN 382 6g

Ø MF

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Alluminio Aluminum Alu

Olio Oil

3 4 4 5 5 6 6 7 8 8 8 9 9 10 10 10 11 11 12 12 12 12 13 13 14 14 14 14 15 15 16 16 16 18 18 18 18 20 20 20 20

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

0,35 0,35 0,5 0,5 0,75 0,5 0,75 0,75 0,5 0,75 1 0,75 1 0,75 1 1,25 1 1,25 0,75 1 1,25 1,5 1 1,5 0,75 1 1,25 1,5 1 1,5 1 1,25 1,5 1 1,25 1,5 2 1 1,25 1,5 2

€

DxE

pcs

cod.

cad/each

19 x 5 19 x 5 19 x 5 19 x 5 19 x 7 19 x 5 19 x 7 22 x 9 22 x 9 22 x 9 22 x 9 22 x 9 22 x 9 27 x 11 27 x 11 27 x 11 27 x 11 27 x 11 36 x 10 36 x 10 36 x 10 36 x 10 36 x 10 36 x 10 36 x 10 36 x 10 36 x 10 36 x 10 36 x 10 36 x 10 41 x 14 41 x 14 41 x 14 41 x 14 41 x 14 41 x 14 41 x 14 41 x 14 41 x 14 41 x 14 41 x 14

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1209603x035 1209604x035 1209604x05 1209605x05 1209605x075 1209606x05 1209606x075 1209607x075 1209608x05 1209608x075 1209608x1 1209609x075 1209609x1 1209610x075 1209610x1 1209610x125 1209611x1 1209611x125 1209612x075 1209612x1 1209612x125 1209612x15 1209613x1 1209613x15 1209614x075 1209614x1 1209614x125 1209614x15 1209615x1 1209615x15 1209616x1 1209616x125 1209616x15 1209618x1 1209618x125 1209618x15 1209618x2 1209620x1 1209620x125 1209620x15 1209620x2

59,644 59,644 59,644 59,644 59,644 59,644 59,644 63,768 63,768 63,768 63,768 63,768 63,768 63,768 63,768 63,768 87,414 87,414 87,414 87,414 87,414 84,114 95,355 95,355 95,355 95,355 95,355 95,355 123,402 123,402 123,402 123,402 123,402 123,402 123,402 123,402 123,402 123,402 123,402 123,402 123,402

347

FILIERE TONDE IN HSS A IMBOCCO CORRETTO, FILETTATURA GAS CILINDRICA ISO 228

Spiral point round dies, spiral point, BSP pipe thread ISO 228

12075

HSS

BSP (GAS)

DIN 5158 - EN 24231

Ø G

HV 62÷63 AISI M2 FORM B Imbocco corretto Spiral Point

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Alluminio Aluminum

Olio Oil

1/8 1/4 3/8 1/2 5/8 3/4 7/8 1” 1.1/8 1.1/4 1.3/8 1.1/2 1.5/8 1.3/4 1.3/4 2” 2” 2.1/4 2.1/2 2.3/4 3” 3.1/2 4”

x x x x x x x x x x x x x x x x x x x x x x x

28 19 19 14 14 14 14 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

DxE

pcs

cod.

30 x 11 38 x 10 45 x 14 45 x 14 55 x 16 55 x 16 65 x 18 65 x 18 75 x 20 75 x 20 90 x 22 90 x 22 90 x 22 90 x 22 105 x 22 90 x 22 105 x 22 105 x 22 120 x 22 120 x 22 130 x 25 150 x 25 160 x 25

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

120751/8 120751/4 120753/8 120751/2 120755/8 120753/4 120757/8 120751 120751.1/8 120751.1/4 120751.3/8 120751.1/2 120751.5/8 120751.3/4 120751.3/4105 1207592 1207512 120752.1/4 120752.1/2 120752.3/4 120753 120753.1/2 120754

€ cad/each

40,367 44,342 63,706 65,218 97,160 142,430 150,891 156,536 219,995 219,995 291,912 291,912 303,191 363,829 363,829 468,189 561,827 705,819 875,738 1.460,281 1.629,777 2.659,666 3.324,746

SINISTRI LEFT HAND

Alu

12077

HSS

DIN 5158 - EN 24231

BSP (GAS)

Ø G

HV 62÷63 AISI M2 FORM B Imbocco corretto Spiral Point

R ≤ 800 N/mm2

Applicazioni Applications

Alu

348

Acciaio Steel

Metalli Metals

Alluminio Aluminum

Olio Oil

1/8 1/4 3/8 1/2 5/8 3/4 7/8 1” 1.1/8 1.1/4 1.1/2 1.3/4 2”

x x x x x x x x x x x x x

28 19 19 14 14 14 14 11 11 11 11 11 11

Sinistra Le hand

€

DxE

pcs

cod.

cad/each

30 x 11 38 x 10 45 x 14 45 x 14 55 x 16 55 x 16 65 x 18 65 x 18 75 x 20 75 x 20 90 x 22 105 x 22 105 x 22

1 1 1 1 1 1 1 1 1 1 1 1 1

120771/8 120771/4 120773/8 120771/2 120775/8 120773/4 120777/8 120771 120771.1/8 120771.1/4 120771.1/2 120771.3/4 120772

82,951 95,143 137,751 137,751 186,577 233,855 258,920 258,920 310,951 310,951 507,676 880,819 880,818

ESAGONALI EXAGONAL

FILIERE IN HSS ESAGONALI FILETTURA BSP (GAS)

Exagonal round dies BSP pipe thread

12098

HSS

BSP

DIN 382

Ø G

1/8 1/4 3/8 1/2 5/8 3/4 7/8 1” 1.1/8 1.1/2 2”

x x x x x x x x x x x

28 19 19 14 14 14 14 11 11 11 11

R ≤ 800 N/mm2

Applicazioni Applications

G Acciaio Steel

1/8 - 1/4 - 3/8 1/2 - 3/4 - 1

€

DxE

pcs

cod.

cad/each

27 x 11 36 x 10 41 x 14 41 x 14 50 x 16 50 x 16 60 x 18 60 x 18 70 x 20 85 x 22 100 x 22

1 1 1 1 1 1 1 1 1 1 1

120981/8 120981/4 120983/8 120981/2 120985/8 120983/4 120987/8 120981 120981.1/8 120981.1/2 120982

60,287 72,376 107,500 107,500 206,460 206,460 253,841 253,841 362,136 578,753 894,513

€

cod.

cad/each

12100500 BSP 1/8÷1”

930,747

In esaurimento To be discontinued

Metalli Metals

Alluminio Aluminum Alu

Olio Oil

Kit per idraulici e installatori For plumbers and journeymen

349

FILIERE TONDE IN HSS, FILETTATURA CONICA PER TUBI 1 16 BSPT Round dies, Whitworth taper thread 1:16 BSPT

12089

HSS

BSPT - Conica

Ø Rc

1/8 x 28 1/4 x 19 3/8 x 19 1/2 x 14 3/4 x 14 1” x 11 1.1/4 x 11 1.1/2 x 11 2” x 11

DxE

pcs

cod.

30 x 11 38 x 14 45 x 18 45 x 18 55 x 22 65 x 25 75 x 26 90 x 27 105 x 28

1 1 1 1 1 1 1 1 1

120891/8 120891/4 120893/8 120891/2 120893/4 120891 120891.1/4 120891.1/2 120892

€ cad/each

58,940 64,950 84,064 129,077 141,643 202,179 394,082 673,938 1.016,618

Conicità 1:16 Taper 1:16

R ≤ 800 N/mm2

Applicazioni Applications

Alu

Acciaio Steel

Metalli Metals

Alluminio Aluminum

Olio Oil

FILIERE TONDE IN HSS A IMBOCCO CORRETTO, FILETTATURA WHITWORTH A PASSO FINE

Round dies, spiral point, Whitworth BSF thread BS-84

12087

HSS

DIN 223 - EN 22568

BSF

Ø HV 62÷63 AISI M2 FORM B

BSF

Imbocco corretto Spiral Point

R ≤ 800 N/mm2

Applicazioni Applications

Alu

350

Acciaio Steel

Metalli Metals

Alluminio Aluminum

Olio Oil

3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1”

x x x x x x x x x x x

32 26 22 20 18 16 16 14 12 11 10

€

DxE

pcs

cod.

cad/each

20 x 7 25 x 9 25 x 9 30 x 11 30 x 11 38 x 10 38 x 10 45 x 14 45 x 14 55 x 22 55 x 22

1 1 1 1 1 1 1 1 1 1 1

120873/16 120871/4 120875/16 120873/8 120877/16 120871/2 120879/16 120875/8 120873/4 120877/8 120871

39,414 44,059 44,059 53,794 53,794 62,686 68,098 85,972 90,060 143,348 143,348

FILIERE TONDE IN HSS A IMBOCCO CORRETTO, FILETTATURA HIT ORTH A PASSO GROSSO BS-84 Round dies, spiral point, Whitworth BSW thread BS-84

12070

HSS

DIN 223 - EN 22568

BSW

Ø BSW

HV 62÷63 AISI M2 FORM B Imbocco corretto Spiral Point

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Alluminio Aluminum

Olio Oil

Alu

1/16 3/32 1/8 5/32 3/16 7/32 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1” 1.1/8 1.1/4 1.3/8 1.1/2 1.1/2 1.5/8 1.3/4 1.7/8 2”

x x x x x x x x x x x x x x x x x x x x x x x x x

60 48 40 32 24 24 20 18 16 14 12 12 11 10 9 9 7 7 6 6 6 5 5 4,5 4,5

€

DxE

pcs

cod.

cad/each

16 x 5 16 x 5 20 x 5 20 x 5 20 x 7 20 x 7 25 x 9 25 x 9 30 x 11 30 x 11 38 x 14 38 x 14 45 x 18 45 x 18 55 x 22 55 x 22 65 x 25 65 x 25 65 x 25 65 x 22 75 x 30 75 x 30 90 x 36 90 x 36 90 x 36

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

120701/16 120703/32 120701/8 120705/32 120703/16 120707/32 120701/4 120705/16 120703/8 120707/16 120701/2 120709/16 120705/8 120703/4 120707/8 120701 120701.1/8 120701.1/4 120701.3/8 1207061.1/2 1207071.1/2 120701.5/8 120701.3/4 120701.7/8 120702

44,004 44,004 32,108 30,194 30,194 30,194 30,194 33,211 41,748 41,748 46,089 67,358 67,358 74,997 103,042 108,451 144,269 144,269 207,213 257,050 449,178 302,958 416,923 416,923 416,923

SINISTRE LEFT HAND

FILIERE TONDE IN HSS A IMBOCCO CORRETTO, FILETTATURA SINISTRA WHITWORTH A PASSO GROSSO Round dies, spiral point, Whitworth BSW thread, LEFT HAND

12088

HSS

DIN 223 - EN 22568

BSW

Ø HV 62÷63 AISI M2 FORM B

BSW

Imbocco corretto Spiral Point

1/8 5/32 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1”

x x x x x x x x x x x x x

40 32 24 20 18 16 14 12 12 11 10 9 8

Sinistra Le hand

€

DxE

pcs

cod.

cad/each

20 x 5 20 x 5 20 x 7 20 x 7 25 x 9 30 x 11 30 x 11 38 x 14 38 x 14 45 x 18 45 x 18 55 x 22 55 x 22

1 1 1 1 1 1 1 1 1 1 1 1 1

120881/8 120885/32 120883/16 120881/4 120885/16 120883/8 120887/16 120881/2 120889/16 120885/8 120883/4 120887/8 120881

49,164 49,164 49,164 49,164 54,969 64,179 70,432 105,878 105,878 134,753 134,753 195,714 195,714

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Alluminio Aluminum

Olio Oil

Alu

351

FILIERE TONDE IN HSS, FILETTATURA CONICA AMERICANA PER TUBI 1 16 NPT Round dies, taper pipe thread NPT

12091

HSS

NPT - Conica

Ø NPT

Conicità 1:16 Taper 1:16

1/16 1/8 1/4 3/8 1/2 3/4 1” 1.1/4 1.1/2 2”

x x x x x x x x x x

DxE 27 27 18 18 14 14 11,5 11,5 11,5 11,5

25 x 30 x 38 x 45 x 45 x 55 x 65 x 75 x 90 x 105 x

9 11 14 18 18 22 25 26 27 28

pcs

cod.

1 1 1 1 1 1 1 1 1 1

120911/16 120911/8 120911/4 120913/8 120911/2 120913/4 120911 120911.1/4 120911.1/2 120912

€ cad/each

47,992 58,940 64,950 84,064 129,077 141,643 202,179 394,082 673,938 1.016,618

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Alluminio Aluminum

Olio Oil

Alu

FILIERE TONDE IN HSS A IMBOCCO CORRETTO, FILETTATURA AMERICANA UNC PASSO GROSSO ANSI B1.1 Round dies, spiral point, unified coarse thread

12080

HSS

DIN 223 - EN 22568

UNC

Ø HV 62÷63 AISI M2 FORM B

Applicazioni Applications

Alu

352

Acciaio Steel

Metalli Metals

Alluminio Aluminum

Olio Oil

cod.

cad/each

4 5 6 8 10 12

x x x x x x

40 40 32 32 24 24

20 x 5 20 x 5 20 x 7 20 x 7 20 x 7 20 x 7

1 1 1 1 1 1

12080N04 12080N05 12080N06 12080N08 12080N10 12080N12

43,065 37,289 37,289 37,289 37,289 37,289

UNC

1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1” 1.1/8 1.1/4 1.3/8 1.1/2 1.1/2 1.5/8 1.3/4 1.7/8 2”

x x x x x x x x x x x x x x x x x x x

20 18 16 14 13 12 11 10 9 8 7 7 6 6 6 5 5 4,5 4,5

20 x 7 25 x 9 30 x 11 30 x 11 38 x 14 38 x 14 45 x 18 45 x 18 55 x 22 55 x 22 65 x 25 65 x 25 65 x 25 65 x 25 75 x 30 75 x 30 90 x 36 90 x 36 90 x 36

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

120801/4 120805/16 120803/8 120807/16 120801/2 120809/16 120805/8 120803/4 120807/8 120801 120801.1/8 120801.1/4 120801.3/8 1208061.1/2 1208071.1/2 120801.5/8 120801.3/4 120801.7/8 120802

34,133 38,033 46,872 46,872 54,433 59,389 74,696 78,412 110,016 113,745 164,998 164,998 164,998 351,146 351,146 351,146 471,007 471,007 584,112

R ≤ 800 N/mm2

pcs

N°

Imbocco corretto Spiral Point

€

DxE

SINISTRE LEFT HAND

FILIERE TONDE IN HSS SINISTRE, FILETTATURA AMERICANA UNC PASSO GROSSO ANSI B1.1 Round dies, spiral point, unified coarse thread

12082

HSS

DIN 223 - EN 22568

UNC Ø

HV 62÷63 AISI M2 FORM B Imbocco corretto Spiral Point

Sinistra Le hand

€

DxE

pcs

cod.

cad/each

N°

6 8 10

x x x

32 32 24

20 x 7 20 x 7 20 x 7

1 1 1

12082NR06 12082NR08 12082NR10

52,730 52,730 52,730

UNC

1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1”

x x x x x x x x x x

20 18 16 14 13 12 11 10 9 8

20 x 7 25 x 9 30 x 11 38 x 14 38 x 14 38 x 14 45 x 18 45 x 18 55 x 22 55 x 22

1 1 1 1 1 1 1 1 1 1

120821/4 120825/16 120823/8 120827/16 120821/2 120829/16 120825/8 120823/4 120827/8 120821

43,131 51,125 60,652 60,652 95,841 95,841 121,367 121,367 175,692 175,693

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Alluminio Aluminum

Olio Oil

Alu

FILIERE TONDE IN HSS, FILETTATURA AMERICANA UNF A PASSO FINE ANSI B1 1 Round dies, unified fine thread

12085

HSS

DIN 223 - EN 22568

UNF

Ø HV 62÷63 AISI M2 FORM B

Applicazioni Applications

Alu

Acciaio Steel

Metalli Metals

Alluminio Aluminum

Olio Oil

cod.

cad/each

2 3 4 5 6 8 10 12

x x x x x x x x

64 56 48 44 40 36 32 28

16 16 20 20 20 20 20 20

x 5 x 5 x 5 x 5 x 5 x 7 x 7 x 7

1 1 1 1 1 1 1 1

12085N02 12085N03 12085N04 12085N05 12085N06 12085N08 12085N10 12085N12

50,276 45,974 43,091 40,223 37,289 37,289 37,289 37,289

UNF

1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1” *1” 1.1/8 1.1/4 1.3/8 1.1/2 1.1/2

x x x x x x x x x x x x x x x x

28 24 24 20 20 18 18 16 14 12 14 12 12 12 12 12

20 25 30 30 38 38 45 45 55 55 55 65 65 65 65 75

x 7 x 9 x 11 x 11 x 10 x 10 x 14 x 14 x 16 x 16 x 16 x 18 x 18 x 18 x 18 x 20

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

120851/4 120855/16 120853/8 120857/16 120851/2 120859/16 120855/8 120853/4 120857/8 120851X12 120851X14 120851.1/8 120851.1/4 120851.3/8 1208561.1/2 1208571.1/2

34,133 38,033 46,872 46,872 54,433 59,389 78,256 82,140 110,016 113,745 136,054 172,052 172,052 172,052 386,401 386,401

R ≤ 800 N/mm2

pcs

N°

Imbocco corretto Spiral Point

€

DxE

Filettatura

NS /

NS thread

353

SINISTRI LEFT HAND

FILIERE TONDE IN HSS IMBOCCO CORRETTO, FILETTATURA SINISTRA AMERICANA UNF A PASSO FINE ANSI B1.1 Round dies, spiral point, unified coarse thread

12086

HSS

DIN 223 - EN 22568

UNF

Ø HV 62÷63 AISI M2 FORM B

Sinistra Le hand

€

DxE

pcs

cod.

cad/each

N°

20 x 7

12086NR10

63,853

UNF

1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1”

x x x x x x x x x x

28 24 24 20 20 18 18 16 14 12

20 x 7 25 x 9 30 x 11 30 x 11 38 x 10 38 x 10 45 x 14 45 x 14 55 x 16 55 x 16

1 1 1 1 1 1 1 1 1 1

120861/4 120865/16 120863/8 120867/16 120861/2 120869/16 120865/8 120863/4 120867/8 120861

52,222 61,917 73,450 73,450 116,064 116,064 146,960 146,960 212,763 212,763

Imbocco corretto Spiral Point

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Alluminio Aluminum

Olio Oil

Alu

FILIERE TONDE IN HSS, FILETTATURA AMERICANA UNEF A PASSO EXTRAFINE ANSI B1 1 Round dies, unified extrafine thread

12079

HSS

NEF

DIN 223 - EN 22568

UNEF

Ø UNEF

HV 62÷63 AISI M2 FORM B Imbocco corretto Spiral Point

R ≤ 800 N/mm2

Applicazioni Applications

Alu

354

Acciaio Steel

Metalli Metals

Alluminio Aluminum

Olio Oil

1/4 3/8 1/2 9/16 5/8 3/4 7/8 1” 1.1/8

x x x x x x x x x

32 32 28 24 24 20 20 20 18

€

DxE

pcs

cod.

cad/each

20 x 7 30 x 11 38 x 10 38 x 10 45 x 14 45 x 14 55 x 16 55 x 16 65 x 18

1 1 1 1 1 1 1 1 1

120791/4 120793/8 120791/2 120799/16 120795/8 120793/4 120797/8 120791 120791.1/8

54,867 79,803 119,699 119,699 190,437 190,437 224,441 243,957 359,110

FILIERE TONDE IN HSS, FILETTATURA METRICA PG PER TUBI DI CONDUZIONE ELETTRICA Round dies, metric Pg thread for cables connections

12093

HSS

DIN 40434

HV 62÷63 AISI M2 FORM B Imbocco corretto Spiral Point

Pg €

DxE

pcs

cod.

cad/each

13,5 x 18 21 x 16 29 x 16 36 x 16 42 x 16 48 x 16

45 x 14 65 x 18 65 x 18 90 x 22 105 x 22 105 x 22

1 1 1 1 1 1

12093135 1209321 1209329 1209336 1209342 1209348

126,849 232,680 232,680 508,804 643,761 643,761

R ≤ 800 N/mm2

Applicazioni Applications

Acciaio Steel

Metalli Metals

Alluminio Aluminum

Olio Oil

Alu

In esaurimento To be discontinued

355

FILIERE TONDE AL CV, FILETTATURA METRICA ISO, PASSO GROSSO C.V. round dies, metric coarse pitch

12001

UNI 4535

DIN 223

Ø M

HRC 60÷61 Metrica passo grosso Metric coarse pitch

Confezione

Packaging

R ≤ 600 N/mm2

Applicazioni Applications

Metalli Metals

Alu

Cu Zn Ni Ms

Alluminio Aluminum

Leghe leggere Light alloys

Olio Oil

368

15032

369

15030

Art. 12002 Self Disponibile su richiesta On demand

356

2 3 4 5 6 6 7 8 8 9 10 10 11 12 12 14 16 16 18 18 20 20 22 24 27 30 33 36

x x x x x x x x x x x x x x x x x x x x x x x x x x x x

0,4 0,5 0,7 0,8 1 1 1 1,25 1,25 1,25 1,5 1,5 1,5 1,75 1,75 2 2 2 2,5 2,5 2,5 2,5 2,5 3 3 3,5 3,5 4

€

DxS

pcs

cod.

cad/each

25,4 x 9 25,4 x 9 25,4 x 9 25,4 x 9 25,4 x 9 38,1 x 14 25,4 x 9 25,4 x 9 38,1 x 14 25,4 x 9 25,4 x 9 38,1 x 14 38,1 x 14 25,4 x 9 38,1 x 14 38,1 x 14 38,1 x 14 50,8 x 16 38,1 x 14 50,8 x 16 38,1 x 14 50,8 x 16 50,8 x 16 50,8 x 16 63,5 x 19 63,5 x 19 63,5 x 19 63,5 x 19

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 3 5 3 5 3 3 3 1 1 1 1

12001202X04 12001203X05 12001204X07 12001205X08 12001206X1 12001306X1 12001207X1 12001208X125 12001308X125 12001209X125 12001210X15 12001310X15 12001311X15 12001212X175 12001312X175 12001314X2 12001316X2 12001516X2 12001318X25 12001518X25 12001320X25 12001520X25 12001522X25 12001524X3 12001627X3 12001630X35 12001633X35 12001636X4

9,482 6,748 6,748 5,714 5,714 5,856 5,714 5,890 5,714 5,714 5,714 8,179 8,179 5,714 8,179 8,179 8,179 9,457 10,796 15,490 10,796 15,984 17,261 17,566 49,708 49,708 59,657 59,657

FILIERE TONDE AL CV, FILETTATURA METRICA ISO, PASSO FINE C.V. round dies, metric fine

12005

UNI 4535

DIN 223

Ø M

HRC 60÷61 Metrica passo fine Metric fine

Confezione

Packaging

R ≤ 600 N/mm2

Applicazioni Applications

Metalli Metals

Alu

Cu Zn Ni Ms

Alluminio Aluminum

Leghe leggere Light alloys

Olio Oil

6 7 8 8 9 9 10 12 10 10 10 11 11 11 12 12 12 12 14 14 14 16 16 18 18 18 18 20 20 22 22 24 24 27 27 30 30 30

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

0,75 0,75 0,75 1 0,75 1 1,25 1,5 0,75 1 1,25 0,75 1 1,25 0,75 1 1,25 1,5 1 1,25 1,5 1 1,5 1,5 2 1,5 2 1,5 2 1,5 2 1,5 2 1,5 2 1,5 2 3

€

DxS

pcs

cod.

cad/each

25,4 x 9 25,4 x 9 25,4 x 9 25,4 x 9 25,4 x 9 25,4 x 9 25,4 x 9 25,4 x 9 38,1 x 14 38,1 x 14 38,1 x 14 38,1 x 14 38,1 x 14 38,1 x 14 38,1 x 14 38,1 x 14 38,1 x 14 38,1 x 14 38,1 x 14 38,1 x 14 38,1 x 14 38,1 x 14 38,1 x 14 38,1 x 14 38,1 x 14 50,8 x 16 50,8 x 16 50,8 x 16 50,8 x 16 50,8 x 16 50,8 x 16 50,8 x 16 50,8 x 16 63,5 x 19 63,5 x 19 63,5 x 19 63,5 x 19 63,5 x 19

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 1 1 1 1 1

12005206X075 12005207X075 12005208X075 12005208X1 12005209X075 12005209X1 12005210X125 12005212X15 12005310X075 12005310X1 12005310X125 12005311X075 12005311X1 12005311X125 12005312X075 12005312X1 12005312X125 12005312X15 12005314X1 12005314X125 12005314X15 12005316X1 12005316X15 12005318X15 12005318X2 12005518X15 12005518X2 12005520X15 12005520X2 12005522X15 12005522X2 12005524X15 12005524X2 12005627X15 12005627X2 12005630X15 12005630X2 12005630X3

6,899 6,899 6,899 6,899 6,899 6,899 6,899 6,899 10,315 10,315 10,315 10,315 10,315 10,315 10,315 10,315 10,315 10,315 10,315 10,315 10,315 10,315 10,315 10,315 10,315 20,243 20,243 20,816 20,816 21,393 21,393 21,696 21,696 48,769 48,769 48,769 48,769 48,769

357

FILIERE TONDE AL CV, FILETTATURA GAS CILINDRICA PER TUBI BSP Round dies, cylindrical BSP thread

12015

DIN 223 EN 24231

BSP (GAS)

Ø G

1/8 1/4 3/8 3/8 1/2 3/4 1” 1.1/4 1.1/2 2”

x x x x x x x x x x

28 19 19 19 14 14 11 11 11 11

38,1 38,1 38,1 50,8 50,8 50,8 63,5 75 75 105

DxS

pcs

cod.

x 14 x 14 x 14 x 16 x 16 x 16 x 19 x 20 x 20 x 22

5 5 5 3 3 3 1 1 1 1

1201531/8 1201531/4 1201533/8 1201553/8 1201551/2 1201553/4 1201561 1201571.1/4 1201571.1/2 1201512

€ cad/each

8,743 8,743 8,743 18,446 18,446 18,446 39,996 76,158 76,158 230,000

R ≤ 600 N/mm2

Applicazioni Applications

Metalli Metals

Alu

Alluminio Aluminum

Cu Zn Ni Ms

Leghe leggere Light alloys

Olio Oil

FILIERE TONDE AL CV, FILETTATURA GAS CONICA PER TUBI BSPT (CON 1 16) Round dies, BSPT taper thread (taper 1:16)

12017

DIN 223 EN 24230

BSPT - Conica

Ø Rc

BSPT

Conicità 1:16 Taper 1:16

1/8 x 28 1/4 x 19 3/8 x 19 1/2 x 14 3/4 x 14 1” x 11 1.1/4 x 11 1.1/2 x 11 2” x 11

R ≤ 600 N/mm2

Applicazioni Applications

Metalli Metals

358

Alluminio Aluminum Alu

Cu Zn Ni Ms

Leghe leggere Light alloys

Olio Oil

€

DxS

pcs

cod.

cad/each

30 x 11 38 x 14 45 x 18 45 x 18 55 x 22 65 x 25 75 x 30 90 x 27 105 x 28

1 1 1 1 1 1 1 1 1

1201731/8 1201731/4 1201743/8 1201741/2 1201753/4 1201761 1201771.1/4 1201791.1/2 1201712

32,918 32,918 32,918 59,312 59,312 72,585 175,914 175,914 364,385

FILIERE TONDE AL CV, FILETTATURA INGLESE WHITWORTH A PASSO GROSSO BSW Round dies, Whitworth thread

12010

DIN 223 EN 22568

BSW

Ø BSW

R ≤ 600 N/mm2

1/8 5/32 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1” 1.1/8 1.1/4 1.3/8 1.1/2 1.3/4 2”

x x x x x x x x x x x x x x x x x x x

40 32 24 20 18 16 14 12 12 11 10 9 8 7 7 6 6 5 4,5

€

DxS

pcs

cod.

cad/each

25,4 x 9 25,4 x 9 25,4 x 9 25,4 x 9 25,4 x 9 38,1 x 14 38,1 x 14 38,1 x 14 38,1 x 14 50,8 x 16 50,8 x 16 50,8 x 16 50,8 x 16 63,5 x 19 63,5 x 19 63,5 x 19 63,5 x 19 90 x 36 90 x 36

5 5 5 5 5 5 5 5 5 3 3 3 3 1 1 1 1 1 1

1201021/8 1201025/32 1201023/16 1201021/4 1201025/16 1201033/8 1201037/16 1201031/2 1201039/16 1201055/8 1201053/4 1201057/8 1201051 1201061.1/8 1201061.1/4 1201061.3/8 1201061.1/2 1201091.3/4 1201092

8,250 7,875 7,875 8,250 8,250 9,482 9,482 9,482 9,482 17,403 17,403 21,305 21,305 51,010 51,010 51,010 51,010 220,842 220,842

Applicazioni Applications

Metalli Metals

Alluminio Aluminum Alu

Cu Zn Ni Ms

Leghe leggere Light alloys

Olio Oil

FILIERE TONDE AL CV, FILETTATURA INGLESE WHITWORTH A PASSO FINE BSF 2 pcs hand taps, british standard fine

12012

DIN 223 EN 22568

BSF

Ø BSF

3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1”

x x x x x x x x x x x

32 26 22 20 18 16 16 14 12 11 10

25,4 25,4 25,4 38,1 38,1 38,1 38,1 50,8 50,8 50,8 50,8

DxS

pcs

cod.

x 9 x 9 x 9 x 14 x 14 x 14 x 14 x 16 x 16 x 16 x 16

5 5 5 5 5 5 5 3 3 3 3

1201223/16 1201221/4 1201225/16 1201233/8 1201237/16 1201231/2 1201239/16 1201255/8 1201253/4 1201257/8 1201251

€ cad/each

8,250 8,250 8,250 9,482 9,482 9,482 9,482 17,403 17,403 21,305 21,305

R ≤ 600 N/mm2

Applicazioni Applications

Metalli Metals

Alu

Alluminio Aluminum

Cu Zn Ni Ms

Leghe leggere Light alloys

Olio Oil

359

FILIERE TONDE AL CV, FILETTATURA CONICA AMERICANA PER TUBI NPT ANSI B 2.1 Round dies, NPT taper thread

12032

DIN 223 EN 22568

NPT

NPT Conicità 1:16 Taper 1:16

NPT - Conica €

DxS

pcs

cod.

cad/each

1/8 x 27 1/4 x 18 3/8 x 18 1/2 x 14 3/4 x 14 1” x 11-1/2 1.1/4 x 11-1/2 1.1/2 x 11-1/2 2” x 11-1/2

30 x 11 38 x 14 45 x 18 45 x 18 55 x 22 65 x 25 75 x 26 90 x 27 105 x 28

1 1 1 1 1 1 1 1 1

1203231/8 1203231/4 1203243/8 1203241/2 1203253/4 1203261 1203271.1/4 1203291.1/2 1203212

32,918 32,918 32,918 59,312 59,312 72,512 123,362 123,362 436,347

R ≤ 600 N/mm2

Applicazioni Applications

Metalli Metals

Alluminio Aluminum Alu

Cu Zn Ni Ms

Leghe leggere Light alloys

Olio Oil

FILIERE TONDE AL CV, FILETTATURA AMERICANA A PASSO GROSSO UNC Round dies, UNC coarse thread

12020

UNC

DIN 223 EN 22568 Ø

360

Alu

cad/each

x x x x x

40 32 32 24 24

25,4 x 9 25,4 x 9 25,4 x 9 25,4 x 9 25,4 x 9

5 5 5 5 5

12020N05 12020N06 12020N08 12020N10 12020N12

7,720 7,720 7,720 7,720 7,720

UNC

1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1” 1.1/8 1.1/4 1.3/8 1.1/2

x x x x x x x x x x x x x x

20 18 16 14 13 12 11 10 9 8 7 7 6 6

25,4 x 9 25,4 x 9 38,1 x 14 38,1 x 14 38,1 x 14 38,1 x 14 50,8 x 16 50,8 x 16 50,8 x 16 50,8 x 16 63,5 x 19 63,5 x 19 63,5 x 19 63,5 x 19

5 5 5 5 5 5 3 3 3 3 1 1 1 1

1202021/4 1202025/16 1202033/8 1202037/16 1202031/2 1202039/16 1202055/8 1202053/4 1202057/8 1202051 1202061.1/8 1202061.1/4 1202061.3/8 1202061.1/2

7,720 7,720 10,715 10,715 10,715 10,715 23,470 23,470 24,772 24,772 66,945 66,945 66,945 66,945

Applications

Cu Zn Ni Ms

cod.

5 6 8 10 12

Applicazioni Alluminio Aluminum

pcs

N°

R ≤ 600 N/mm2

Metalli Metals

€

DxS

Leghe leggere Light alloys

Olio Oil

FILIERE TONDE AL CV, FILETTATURA AMERICANA A PASSO FINE UNF Round dies, UNC coarse thread

12025

DIN 223 EN 22568

UNF

€

DxS

pcs

cod.

cad/each

N°

5 6 8 10 12

x x x x x

44 40 36 32 28

25,4 x 9 25,4 x 9 25,4 x 9 25,4 x 9 25,4 x 9

5 5 5 5 5

12025N05 12025N06 12025N08 12025N10 12025N12

8,109 8,109 8,109 8,109 8,109

UNF

1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1” 1.1/8 1.1/4 1.3/8 1.1/2

x x x x x x x x x x x x x x

28 24 24 20 20 18 18 16 14 12 12 12 12 12

25,4 x 9 25,4 x 9 38,1 x 14 38,1 x 14 38,1 x 14 38,1 x 14 50,8 x 16 50,8 x 16 50,8 x 16 50,8 x 16 63,5 x 19 63,5 x 19 63,5 x 19 63,5 x 19

5 5 5 5 5 5 3 3 3 3 1 1 1 1

1202521/4 1202525/16 1202533/8 1202537/16 1202531/2 1202539/16 1202555/8 1202553/4 1202557/8 1202551 1202561.1/8 1202561.1/4 1202561.3/8 1202561.1/2

8,109 8,109 11,500 11,500 11,500 11,500 24,889 24,889 26,271 26,271 69,328 69,328 69,328 69,328

R ≤ 600 N/mm2

Applicazioni Applications

Metalli Metals

Alu

Alluminio Aluminum

Cu Zn Ni Ms

Leghe leggere Light alloys

Olio Oil

361

362

ACCESSORI PER UTENSILI A FILETTARE THREADING TOOLS ACCESSORIES

363

GIRAMASCHI ESTENSIBILI, MODELLO AMERICANO Adjustable tap wrenches

15001

Lega Leggera

DIN 1814

Zinc die-cast

Gr. N.

Per maschi / for taps BSW-UNC-UNF

BSP-NPT

cod.

cad/each

€

0 1 1.1/2 2 3 4 5 *6 *7 *8

1÷8 1 ÷ 10 1 ÷ 12 4 ÷ 12 5 ÷ 20 11 ÷ 27 13 ÷ 32 18 ÷ 42 25 ÷ 52 25 ÷ 64

1/16 ÷ 1/4 1/16 ÷ 3/8 1/16 ÷ 1/2 5/32 ÷ 1/2 7/32 ÷ 3/4 7/16 ÷ 1” 1/2 ÷ 1.1/4 3/4 ÷ 1.1/2 1” ÷ 2.1/8 1” ÷ 2:1/2

1/8 1/8 1/8 1/8 ÷ 1/2 1/4 ÷ 3/4 1/4 ÷ 1” 1/2 ÷ 1.1/4 3/4 ÷ 2.1/4 3/4 ÷ 3”

130 180 180 280 380 500 700 780 800 1200

1500100 1500101 1500101.1/2 1500102 1500103 1500104 1500105 1500106 1500107 1500108

12,086 12,973 14,954 20,875 32,152 50,771 104,358 228,169 248,196 557,031

* corpo in acciaio * steel

Art. 15002 Self Disponibile su richiesta On demand

15003

364

Acciaio

DIN 1814

Steel

Gr. N.

Per maschi / for taps BSW-UNC-UNF

BSP-NPT

cod.

cad/each

€

0 1 1.1/2 2 3 4 5 6 7 8

1÷8 1 ÷ 10 1 ÷ 12 4 ÷ 12 5 ÷ 20 11 ÷ 27 13 ÷ 32 18 ÷ 42 25 ÷ 52 25 ÷ 64

1/16 ÷ 1/4 1/16 ÷ 3/8 1/16 ÷ 1/2 5/32 ÷ 1/2 7/32 ÷ 3/4 7/16 ÷ 1” 1/2 ÷ 1.1/4 3/4 ÷ 1.1/2 1” ÷ 2.1/8 1” ÷ 2:1/2

1/8 1/8 1/8 1/8 ÷ 1/2 1/4 ÷ 3/4 1/4 ÷ 1” 1/2 ÷ 1.1/4 3/4 ÷ 2.1/4 3/4 ÷ 3”

170 200 200 260 345 430 770 870 1000 1200

1500300 1500301 1500301.1/2 1500302 1500303 1500304 1500305 1500306 1500307 1500308

19,740 21,149 23,977 31,031 50,771 81,789 129,743 241,207 258,157 557,031

GIRAMASCHI A CRICCHETTO REVERSIBILE Tap holder with ratchet

Serie corta

15010

Acciaio Steel

Short serie

Gr. N.

Per maschi / for taps M

Per maschi / for taps BSW

pcs.

cod.

cad/each

€

1 2

3 ÷ 10 5 ÷ 12

1/8 ÷ 3/8 7/32 ÷ 1/2

85 100

1 1

1501001 1501002

18,931 22,804

Art. 15002 Self Disponibile su richiesta On demand

Serie lunga

15011

Acciaio Steel

Long serie

Gr. N.

Per maschi / for taps M

Per maschi / for taps BSW

pcs.

cod.

cad/each

1 2

3 ÷ 10 5 ÷ 12

1/8 ÷ 3/8 7/32 ÷ 1/2

250 300

1 1

1501101 1501102

27,133 34,148

Griffe per Jaws for 1501001 - 1501101 1501002 - 1501102

€

cod.

cad/each

1501110 1501112

1,970 2,464

365

GIRAMASCHI A MANDRINO TIPO GOODEL Goodel tap holder without ratchet

Serie corta

15005

Short serie

Gr. N.

Per maschi / for taps M

Per maschi / for taps BSW-

pcs.

cod.

cad/each

€

1 2 3 4

3÷5 6÷8 9 ÷ 10 10 ÷ 12

1/8 ÷ 3/16 1/4 ÷ 3/8 3/8 3/8 ÷ 1/2

62 78 102 102

1 1 1 1

1500501 1500502 1500503 1500504

8,266 10,509 14,003 20,588

Art. 15007 Self Disponibile su richiesta On demand

Serie lunga

15006

Art. 15007 Self Disponibile su richiesta On demand

366

Long serie

Gr. N.

Per maschi / for taps M

Per maschi / for taps BSW-

pcs.

cod.

cad/each

€

1 2 3 4

3÷5 6÷8 9 ÷ 10 10 ÷ 12

1/8 ÷ 3/16 1/4 ÷ 3/8 3/8 3/8 ÷ 1/2

150 150 150 150

1 1 1 1

1500601 1500602 1500603 1500604

14,447 17,210 23,624 33,848

GIRAMASCHI FISSI A SFERA Ball tap wrenches

15013 Gr. N.

Per maschi / for taps M

cod.

cad/each

€

0 1 3 4 5 6

1÷4 3,5 ÷ 8 5 ÷ 12 10 ÷ 16 12 ÷ 20 18 ÷ 27

200 200 200 200 200 200

1501300 1501301 1501303 1501304 1501305 1501306

15,215 15,215 28,200 37,224 44,174 87,185

PROLUNGA PER MASCHI Tap extension

10098

DIN 377 Quadro Square mm

2.1 2.4 2.7 3.0 3.4 3.8 4.3 4.9 5.5 6.2 7.0 8.0 9.0

60 70 80 90 95 100 105 110 115 120 125 125 130

Per maschi for taps DIN 352 M 1-2.6 M3 M 3.5 M4

M 4.5-8 M 9-10 M 11 M 12 M 14-16

€

cod.

cad/each

Quadro Square mm

10098021 10098024 10098027 10098030 10098034 10098038 10098043 10098049 10098055 10098062 10098070 10098080 10098090

7,757 7,757 7,757 7,757 7,757 9,296 11,174 8,696 9,934 10,873 13,352 16,766 18,304

10.0 11.0 12.0 13.0 14.5 16.0 18.0 20.0 22.0 24.0 26.0 29.0 32.0

140 150 155 165 175 180 200 220 220 235 250 265 285

Per maschi for taps DIN 352 M 18 M 20 M 22-24 M 27 M 30 M 33 M 36 M39-42 M45-48 M52

€

cod.

cad/each

10098100 10098110 10098120 10098130 10098145 10098160 10098180 10098200 10098220 10098240 10098260 10098290 10098320

24,224 29,506 38,503 43,443 52,764 55,856 65,178 83,810 118,452 152,299 194,608 229,864 322,943

367

PORTAFILIERE IN ACCIAO PER FILIERE TONDE Steel die cast round dies stock

DIN 225 EN 22568

15037

Steel Gr.

16 x 5 20 x 5 20 x 7 25 x 9 30 x 11 38 x 10 38 x 14 45 x 14 45 x 18 55 x 16 55 x 22 65 x 18 65 x 25 75 x 20 75 x 30 90 x 22 90 x 36 105 x 22 105 x 36 120 x 22 120 x 36 130 x 25 130 x 36 140 x 22 150 x 25 160 x 25

15032

368

M M 1 ÷ 2,6 M3÷4 M 4,5 ÷ 6 M7÷9 M 10 ÷ 11 MF 12 ÷ 14 M 12 ÷ 14 MF 16 ÷ 20 M 16 ÷ 20 MF 22 ÷ 26 M 22 ÷ 24 MF 27 ÷ 35 M 27 ÷ 36 MF 38 ÷ 42 M 39 ÷ 42 MF 45 ÷ 52 M 45 ÷ 52 MF 54 ÷ 65 M 56 ÷ 64 MF 64 ÷ 71 M 64 ÷ 71

ACCIAIO

Per filiere HSS e HSS-CO

For HSS and HSS-CO round dies

BSW-BSP W 1/16 ÷ 3/32 W 1/8 ÷ 5/32 W 3/16 ÷ 1/4 W 5/16 ÷ W 3/8 ÷ 7/16 G 1/8 ÷ 1/4 W 1/2 ÷ 9/16 G 3/8 ÷ 1/2 W 5/8 ÷ 13/16 G 5/8 ÷ 3/4 W 7/8 ÷ 1” G 7/8 ÷ 1” W 1.1/8 ÷ 1”3/8 G 1.1/8 ÷ 1”1/4 W 1.1/2 ÷ 1”5/8 G 1.3/8 ÷ 1”3/4 W 1.3/4 ÷ 2” G 2” ÷ 2”1/4 W 2” ÷ 2”1/4 G 2.1/4 ÷ 2.3/4 BSW 2.1/2 ÷ 2.3/4 G 3”

G 3.1/2 G 4”

DIN 225 EN 22568 Steel

pcs.

cod.

160 190 190 215 250 310 310 445 445 495 495 550 550 735 735 900 900 980 980 960 960 960 960 980 1000 1000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1503716X5 1503720X5 1503720X7 1503725X9 1503730X11 1503738X10 1503738X14 1503745X14 1503745X18 1503755X16 1503755X22 1503765X18 1503765X25 1503775X20 1503775X30 1503790X22 1503790X36 15037105X22 15037105X36 15037120X22 15037120X36 15037130X25 15037130X36 15037140X22 15037150X25 15037160X25

ACCIAIO

€ cad/each

16,923 20,313 20,313 23,690 23,690 27,080 27,080 35,542 35,542 44,004 44,004 79,533 79,533 150,474 150,474 280,922 280,922 428,775 428,775 1.108,901 1.108,901 1.542,604 1.542,604 1.936,879 2.203,016 3.021,138

Per filiere al C

For CV round dies

Gr. N.

Ø mm

Ø pollici / inches

L mm

pcs.

cod.

1 2 3 4 5 6 7

25,4 x 9,5 38,1 x 12,7 50,8 x 15,9 63,5 x 19 76,2 x 22 88,9 x 25,4 101,6 x 25,4

1” x 3/8 1”1/2 x 1/2 2” x 5/8 2.1/2 x 3/4 3” x 7/8 3.1/2 x 1” 4” x 1”

210 300 490 520 700 950 890

1 1 1 1 1 1 1

1503201 1503202 1503203 1503204 1503205 1503206 1503207

€ cad/each

24,681 29,961 45,829 78,230 149,940 282,929 852,700

PORTAFILIERE IN LEGA LEGGERA PER FILIERE TONDE Zinc die cast round dies stock

15035

DIN 225 EN 22568 Zinc die-cast

LEGA LEGGERA

Gr.

16 x 5 20 x 5 20 x 7 25 x 9 30 x 11 38 x 10 38 x 14 45 x 14 45 x 18 55 x 16 55 x 22 65 x 18 65 x 25 *75 x 20 *75 x 30 *90 x 22 *90 x 36

M 1 ÷ 2,6 M3÷4 M 4,5 ÷ 6 M7÷9 M 10 ÷ 11 MF 12 ÷ 14 M 12 ÷ 14 MF 16 ÷ 20 M 16 ÷ 20 MF 22 ÷ 26 M 22 ÷ 24 MF 27 ÷ 35 M 27 ÷ 36 MF 38 ÷ 42 M 39 ÷ 42 MF 45 ÷ 52 M 45 ÷ 52

Per filiere HSS e HSS-CO

For HSS and HSS-CO round dies €

BSW-BSP

pcs.

cod.

cad/each

W 1/16 ÷ 3/32 W 1/8 ÷ 5/32 W 3/16 ÷ 1/4 W 5/16 ÷ W 3/8 ÷ 7/16 G 1/8 ÷ 1/4 W 1/2 ÷ 9/16 G 3/8 ÷ 1/2 W 5/8 ÷ 13/16 G 5/8 ÷ 3/4 W 7/8 ÷ 1” G 7/8 ÷ 1” W 1”1/8 ÷ 1”3/8 G 1”1/8 ÷ 1”1/4 W 1”1/2 ÷ 1”5/8 G 1”3/8 ÷ 1”3/4 W 1”3/4 ÷ 2”

160 185 185 215 265 315 315 450 450 560 560 630 630 710 710 920 920

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1503516X5 1503520X5 1503520X7 1503525X9 1503530X11 1503538X10 1503538X14 1503545X14 1503545X18 1503555X16 1503555X22 1503565X18 1503565X25 1503575X20 1503575X30 1503590X22 1503590X36

8,318 8,749 8,749 9,453 14,669 16,220 16,220 25,673 25,673 39,492 39,492 56,690 56,690 135,377 145,127 269,995 269,995

* acciaio * steel

15030

DIN 225 EN 22568 Zinc die-cast

LEGA LEGGERA

Per filiere al C

For CV round dies

Gr. N.

Ø mm

Ø pollici / inches

L mm

pcs.

cod.

0 1 2/A 2 3 4 *5 *6 *7

20,6 x 6,35 25,4 x 9,5 33,4 x 11,1 38,1 x 12,7 50,8 x 15,9 63,5 x 19 76,2 x 22 88,9 x 25,4 101,6 x 25,4

13/16 x 1/4 1” x 3/8 1.5/16 x 7/16 1.1/2 x 1/2 2” x 5/8 2.1/2 x 3/4 3” x 7/8 3.1/2 x 1” 4” x 1”

185 215 265 310 485 630 700 940 980

1 1 1 1 1 1 1 1 1

1503000 1503001 1503002/A 1503002 1503003 1503004 1503005 1503006 1503007

€ cad/each

9,453 9,869 17,210 17,210 35,960 55,700 135,377 247,493 775,775

* acciaio * steel

Art. 15031 Inches Self Disponibile su richiesta On demand

369

ESPOSITORE MAGAZZINO GIRAUTENSILI Tool holders display

17001

Art. 17001100

€ 692,105 40 pcs

15001

15005

15006

15010

15030

GR. 1 6 pcs GR. 2 6 pcs GR. 3 3 pcs

GR. 1 3 pcs GR. 2 2 pcs

GR. 1 2 pcs GR. 2 2 pcs

Ø 25,4 6 pcs Ø 38,1 4 pcs Ø 50,8 2 pcs

15010

15011

GR. 1 2 pcs GR. 2 2 pcs

15010

15011

GR. 1 2 pcs GR. 2 2 pcs

Art. 17001104

€ 994,205 51 pcs

15001 GR. 1 GR. 2 GR. 3 GR. 4

6 pcs 5 pcs 2 pcs 1 pc

15035 16x5 20x5 20x7 25x9 30x11 38x10

2 pcs 2 pcs 2 pcs 6 pcs 6 pcs 2 pcs

38x14 45x14 45x18 55x16 55x22

4 pcs 2 pcs 1 pc 1 pc 1 pc

Art. 17001108

€ 1.508,927 51 pcs

15001 GR. 1 GR. 2 GR. 3 GR. 4

370

6 pcs 5 pcs 2 pcs 1 pc

15037 16x5 20x5 20x7 25x9 30x11 38x10

2 pcs 2 pcs 2 pcs 6 pcs 6 pcs 2 pcs

38x14 45x14 45x18 55x16 55x22

4 pcs 2 pcs 1 pc 1 pc 1 pc

ESTRATTORI DI VITI E PRIGIONIERI IN ACCIAIO LEGATO Screw extractors

DIN 225 EN 22568

10065

ACCIAIO

Steel

Gr. N.

viti screws

1 2 3 4 5 6 7 8

M3÷6 M6÷8 M 8 ÷ 11 M 11 ÷ 14 M 14 ÷ 18 M 18 ÷ 25 M 25 ÷ 35 M 35 ÷ 50

3÷4 4 ÷ 4,5 5,5 ÷ 6 6 ÷ 6,5 9 ÷ 10 12 ÷ 13 14 ÷ 16 20 ÷ 22

q 3 3,6 5,5 6,3 8,6 12 15 19

giramaschi n. tap.wrench n.

pcs.

cod.

cad/each

€

0-1-1.1/2 0-1-1.1/2 1-1.1/2 2-3-4 3-4-5 3-4-5-6 4-5-6 4-5-6

1 1 1 1 1 1 1 1

1006501 1006502 1006503 1006504 1006505 1006506 1006507 1006508

1,724 1,724 2,031 2,465 3,263 4,540 9,072 12,485

q Ø

2/3

Inserire l’estrattore nella vite danneggiata per almeno 2/3 della sua parte utile Please insert the screw extractor inside the damaged screw up to 2/3 of the working part

SERIE DI ESTRATTORI IN ASTUCCIO DI PLASTICA

Screw extractors sets in plastic cases

10067 composizione description

pcs.

cod.

cad/each

5 pcs 6 pcs 8 pcs

1 1 1

10067101 10067102 10067103

10,491 15,073 34,970

pcs.

cod.

cad/each

410031251

19,034

410031261

9,891

CONTAFILETTI PER FILETTI METRICI ISO 6

Ø1 5 Ø1 6 Ø1 8

Screw pitch gauge ISO 60°-Wh 55°

€

H 55

41003 composizione description 52 pcs

M 0,25 ÷ 6 Wh 62 ÷ 4 12 pcs M 0,5 ÷ 1,75

€

371

ASSORTIMENTI A FILETTARE IN HSS

ASSORTIMENTI SETS

HSS THREADIND SETS

372

ASSORTIMENTI A FILETTARE IN HSS, FILETTATURA METRICA, IN ASTUCCI DI METALLO ED ABS Threading sets, metric thread, in metal and plastic boxes

17020414

17020401 17020409 cod. 17020408 HSS-CO

Abs

17020414 HSS-G

TiN

17020401 HSS-G

Sinistra Le hand

17020415

HSS-G

17020402 17020410

17020407 HSS-CO

Metal

17020415

Metal

281,344 DIN 352 - 3 pcs M3-4-5-6 8 - 10 - 12

131,294

194,254

M cod.

Metal

198,279

HSS-G

TiN

€ cad/each

Composizione Description

250,526 DIN 352 - 3 pcs M 3 - 4 - 5 - 6 - 8 - 10 - 12

321,523 1.1/2

17020402 HSS-G

167,462 2,5 - 3,3 - 4,2 - 5 6,8 - 8,5 - 10,25

Sinistra Le hand

17020410 HSS-G

241,148

17020404

M cod.

€ cad/each

Composizione Description

DIN 352 - 1 pcs M 3 - 4 - 5 - 6 - 8 - 10 - 12

Abs

17020404 HSS-G

89,531

1.1/2

ASSORTIMENTI SETS

17020407

17020409

Composizione Description

Abs

€ cad/each

17020408

2,5 - 3,3 - 4,2 - 5 6,8 - 8,5 - 10,25

373

ASSORTIMENTI A FILETTARE IN HSS PER L'INDUSTRIA, FILETTATURA METRICA, IN CASSETTA METALLICA Hss threading sets for industry, metric thread, in metal boxes

17020513

17020501

M €

cod.

cad/each

17020513 HSS-G

Composizione Description

388,509

TiN

DIN 352 - 3 pcs M 3 - 4 - 5 - 6 - 8 - 10 - 12

Ø 25

21 214,358

HSS-G

25x9

17020500

cod.

17020514 HSS-G

TiN

cad/each

€

Composizione Description

602,866

DIN 352 - 3 pcs

N° 1 - 2

DIN223

17020500

Misure/Dimensions: 496x334x65 mm

HSS-G

M3-4-5-68 - 10 - 12

368,418

17020514

1.1/2

17020501

Misure/Dimensions: 265x118x35 mm

20x5 - 20x7 - 25x9 30x11 - 38x14

Ø 2,5 3,3 4,2 5 6,8 - 8,5 - 10,25

N° 1

17020507

cod.

17020506 HSS-CO

cad/each

€

Composizione Description

448,806

DIN 352 - 3 pcs

N° 1 - 2

ASSORTIMENTI SETS

DIN223

Misure/Dimensions: 496x334x65 mm

Sinistra Le hand

17020507 HSS-G

M3-4-5-68 - 10 - 12

488,986

20x5 - 20x7 - 25x9 30x11 - 38x14

Ø 2,5 3,3 4,2 5 6,8 - 8,5 - 10,25

N° 1

374

17020506

ASSORTIMENTI A FILETTARE IN HSS PER L'INDUSTRIA, FILETTATURA METRICA, IN CASSETTA METALLICA Hss threading sets for industry, metric thread, in metal boxes

17020518

17020503

17020509

cad/each

€

Composizione Description

1.058,360

DIN 352 - 3 pcs

N° 1 - 3

DIN 223

20x5 - 20x7 - 25x9 30x11 - 38x14 45x18

M3-4-5-6-810 - 12 - 14 - 16 18 - 20

N° 1 - N° 2

cod. 17020508 HSS-CO

17020508

n 22 17020518 HSS-G

TiN

1.312,912

17020503

836,977

HSS-G

Misure/Dimensions: 510x237x50 mm

Sinistra Le hand

17020509 HSS-G

1.098,554

ASSORTIMENTI A FILETTARE IN HSS PER L'INDUSTRIA, FILETTATURA METRICA, IN VALIGETTA DI LEGNO Hss threading sets for industry, metric thread, in wood boxes

17020505 cad/each

€

Composizione Description

1.931,854

DIN 352 - 3 pcs

N° 1 - 4

DIN 223

20x5 - 20x7 - 25x9 30x11 - 38x14 45x18 - 55x22

cod. 17020544 HSS-CO

n 22

Misure/Dimensions: 540x338x87 mm

17020504 HSS-G

1.600,943

Misure/Dimensions: 540x338x87 mm

Valigetta in metallo Metal box

17020505 HSS-G

M3-4-5-6-810 - 12 - 14 - 16 18 - 20 - 22 - 24

DIN 352 - 3 pcs

N° 1 - 3 - 5

DIN 223

20x7 - 25x9 - 30x11 38x14 - 45x18 55x22 - 65x25

3.268,872

Misure/Dimensions: 885x380x90 mm

M 5 - 6 - 8 - 10 - 12 14 - 16 - 18 - 20 22 - 24 - 27 - 30

375

ASSORTIMENTI SETS

17020504

17020544

ASSORTIMENTI A FILETTARE IN HSS PER L'INDUSTRIA, FILETTATURA METRICA PASSO GROSSO E FINE, IN CASSETTA DI LEGNO Hss threading sets for industry, metric coarse and fine thread, in wood box

17025513

17025512

17025511

M+MF €

cod.

cad/each

Composizione Description N° 1 - 3

796,767

HSS-G

Legno Wood

Misure/Dimensions: 583x300x55 mm

M 3 pcs MF 2 pcs M 4x0,7 - 5x0,8 6x1 - 8x1 - 8x1,25 10x1,25 - 10x1,5 12x1,25 - 12x1,5 12x1,75 - 14x1,5 14x2

25x9 38x14

N° 1

17025513

N° 1 - 3

n 22

17025512 HSS-G

M 3 pcs MF 2 pcs

1.262,138

Misure/Dimensions: 510x340x74 mm

M 3x0,5 - 4x0,7 5x0,8 - 6x1 - 7x1 8x1 - 8x1,25 10x1,25 - 10x1,5 12x1,25 - 12x1,5 12x1,75 - 14x1,25 14x1,5 - 14x2 16x1,5 - 16x2

20x7 - 25x9 30x10 - 38x14 45x18

N° 1

N° 1 - 3 M 3 pcs MF 2 pcs

17025511 HSS-G

FIAT HSS-G special for automotive

1.325,595

20 passi 20 thread Misure/Dimensions: 640x400x55 mm

M 2x0,4 - 3x0,5 4x0,7 - 5x0,8 - 6x1 7x1 - 8x1 - 8x1,25 10x1 - 10x1,25 10x1,5 - 12x1,25 12x1,5 - 12x1,75 14x1,25 - 14x1,5 14x2 - 16x1,5 16x2 - 18x1,5

25x9 38x14

N° 1

ASSORTIMENTI A FILETTARE IN HSS PER L'INDUSTRIA, FILETTATURA METRICA PASSO FINE, IN CASSETTA METALLICA Hss threading sets for industry, metric fine thread, in metal box

17020524

17020510

17020511

€

cod.

cad/each

Composizione Description N° 1 - 3

823,911

HSS-G

Metallo Metal

Misure/Dimensions: 510x237x50 mm

2 pcs MF 3x0,35 - 4x0,5 5x0,75 - 6x0,75 - 8x1 10x1,25 - 12x1,5 14x1,5 - 16x1,5 18x1,5 - 20x1,5

20x5 - 20x7 - 25x9 30x11 - 38x10 45x14

N° 1 - 3

17020510 HSS-G

1.473,674

ASSORTIMENTI SETS

Misure/Dimensions: 510x237x50 mm

2 pcs MF 6x0,75 - 8x0,75 8x1 - 10x1 - 12x1 12x1,5 - 14x1,25 14x1,5 - 16x1,5 18x1,5 - 20x1,5

n 22 20x7 - 25x9 30x11 - 38x10 45x14

N° 1 - 4

17020511 HSS-G

376

2 pcs

1.982,763

MF 6x0,7 - 8x0,75 8x1 - 10x1-12x1 12x1,5 - 14x1,25 14x1,5 - 16x1,5 18x1,5 - 20x1,5 22x1,5 - 24x1,5

20x7 - 25x9 30x11 - 38x10 45x14 - 55x16

17020524

Hss threading sets for automotive, metric coarse and fine thread, in wood box

17012600

M+MF €

cod.

cad/each

FIAT HSS

17012600 HSS-G

1.086,801

110 pcs 35 passi 35 pitch

Confezione Packaging

Misure/Dimensions: 500x340x70 mm Kg. 7,9

Composizione Description 2 pcs

25,4 (14) 38,1 (21)

2 x 0,4 3 x 0,5 4 x 0,7 5 x 0,8 6 x 0,75 6x1 7 x 0,75 7x1 8 x 0,75 8x1 8 x 1,25 9 x 0,75 9x1 9 x 1,25 10 x 0,75 10 x 1 10 x 1,25 10 x 1,5

11 x 0,75 11 x 1 11 x 1,25 11 x 1,5 12 x 0,75 12 x 1 12 x 1,25 12 x 1,5 12 x 1,75 14 x 1 14 x 1,25 14 x 1,5 14 x 2 16 x 1 16 x 1,5 16 x 2 18 x 1,5

SPECIALE PER GARAGE SPECIAL FOR AUTOMOTIVE

ASSORTIMENTI A FILETTARE IN HSS PER GARAGE TIPO FIAT, FILETTATURA METRICA PASSO GROSSO E FINE, IN CASSETTA DI LEGNO

N° 1 - 3

25,4 - 38,1

N.1

Per generare e ravvivare i filetti di: To make and renew threads of: FIAT, ALFA R M , LANCIA, V LKSWA N, BMW, M RC D S, F RD, P L .M., P T, R NA LT, V LV , CITR N, T TA, NISSAN, H NDA, TC. Art. 12057 Ricambio Spare part

10097 HSS

2 pcs

€

cod.

cad/each

2 x 0,4 3 x 0,5 4 x 0,7 5 x 0,8 6 x 0,75 6x1 7 x 0,75 7x1 8 x 0,75 8x1 8 x 1,25 9 x 0,75 9x1 9 x 1,25 10 x 0,75 10 x 1 10 x 1,25 10 x 1,5 11 x 0,75 11 x 1 11 x 1,25 11 x 1,5 12 x 0,75 12 x 1 12 x 1,25 12 x 1,5 12 x 1,75 14 x 1 14 x 1,25 14 x 1,5 14 x 2 16 x 1 16 x 1,5 16 x 2 18 x 1,5

1009702X04 1009703X05 1009704X07 1009705X08 1009706X075 1009706X1 1009707X075 1009707X1 1009708X075 1009708X1 1009708X125 1009709X075 1009709X1 1009709X125 1009710X075 1009710X1 1009710X125 1009710X15 1009711X075 1009711X1 1009711X125 1009711X15 1009712X075 1009712X1 1009712X125 1009712X15 1009712X175 1009714X1 1009714X125 1009714X15 1009714X2 1009716X1 1009716X15 1009716X2 1009718X15

7,070 6,324 6,324 6,324 6,324 6,324 7,615 7,615 9,337 9,337 9,337 10,398 10,398 10,398 11,387 11,387 11,387 11,387 15,963 15,963 15,963 15,963 16,824 16,824 16,824 16,824 16,824 21,971 21,971 21,971 21,971 23,248 23,248 23,248 32,743

12057 HSS

Ø M

2 x 0,4 25,4x9 3 x 0,5 4 x 0,7 5 x 0,8 6 x 0,75 6x1 7 x 0,75 7x1 8 x 0,75 8x1 8 x 1,25 9 x 0,75 9x1 9 x 1,25 10 x 0,75 38,1x14 10 x 1 10 x 1,25 10 x 1,5 11 x 0,75 11 x 1 11 x 1,25 11 x 1,5 12 x 0,75 12 x 1 12 x 1,25 12 x 1,5 12 x 1,75 14 x 1 14 x 1,25 14 x 1,5 14 x 2 16 x 1 16 x 1,5 16 x 2 18 x 1,5

€

cod.

cad/each

1205702X04 1205703X05 1205704X07 1205705X08 1205706X075 1205706X1 1205707X075 1205707X1 1205708X075 1205708X1 1205708X125 1205709X075 1205709X1 1205709X125 1205710X075 1205710X1 1205710X125 1205710X15 1205711X075 1205711X1 1205711X125 1205711X15 1205712X075 1205712X1 1205712X125 1205712X15 1205712X175 1205714X1 1205714X125 1205714X15 1205714X2 1205716X1 1205716X15 1205716X2 1205718X15

7,533 7,533 7,533 7,533 7,533 7,533 7,533 7,533 7,533 7,533 7,533 7,533 7,533 7,533 13,717 13,717 13,717 13,717 13,717 13,717 13,717 13,717 13,717 13,717 13,717 13,717 13,717 13,717 13,717 13,717 13,717 13,717 13,717 13,717 13,717

377

ASSORTIMENTI SETS

Art. 10097 Ricambio Spare part

ASSORTIMENTI A FILETTARE IN HSS PER L'INDUSTRIA, FILETTATURA GAS PER TUBI, IN CASSETTA DI LEGNO

Hss threading sets for industry, BSP nad BSPT thread, in wood boxes

17025618

BSP €

cod.

17025615 HSS-G

cad/each

N° 1 - 3 - 5

1.621,745

Misure/Dimensions: 672x445x64 mm

Valigetta in metallo Metal box

17025614 HSS-G

17025616 HSS-G

HSS-CO

17025628

17025618 HSS-G

3.455,023

38x10 - 45x14 55x16 - 65x18 75x20 - 90x22

N° 1 - 3 - 5

1.861,480

2 pcs 1/8 - 1/4 - 3/8 1/2 - 3/4 - 1”

n 22

30x11 - 38x10 45x14 - 55x16 65x18

N° 1 - 3 - 5

2.397,363

2 pcs 1/8 - 1/4 - 3/8 1/2 - 3/4 - 1”

17025629

30x11 - 38x10 45x14 - 55x16 65x18

BSPT

HSS-G

€ cad/each

17025629 HSS-G

Composizione Description N° 1 - 3 - 5

1.861,480

Misure/Dimensions: 672x445x64 mm

1 pcs 1/8 - 1/4 - 3/8 1/2 - 3/4 - 1”

30x11 - 38x10 45x14 - 55x16 65x18

N° 2 - 4 - 7

4.512,683

Misure/Dimensions: 690x445x128 mm

ASSORTIMENTI SETS

2 pcs 1/4 - 3/8 - 1/2 3/4 - 1” - 1.1/4 - 1.1/2

Misure/Dimensions: 672x445x64 mm

17025628

378

n 22

30x11 - 38x10 45x14 - 55x16 65x18

N° 2 - 4 - 7

cod.

Legno Wood

2 pcs 1/8 - 1/4 - 3/8 - 1/2 5/8 - 3/4 - 7/8 - 1”

Misure/Dimensions: 672x445x64 mm

Sinistra Le hand

30x11 - 38x10 45x14 - 55x16 65x18

N° 1 - 3 - 5

1.826,224

Misure/Dimensions: 690x455x128 mm

17025617

2 pcs 1/8 - 1/4 - 3/8 1/2 - 3/4 - 1”

Misure/Dimensions: 550x297x56 mm

Legno Wood

Composizione Description

1 pcs 1/4 - 3/8 - 1/2 3/4 - 1” - 1.1/4 - 1.1/2

n 22

38x14 - 45x18 55x22 - 65x25 75x30 - 90x36

17025617

17025616

17025614

17025615

ASSORTIMENTI A FILETTARE IN HSS PER L'INDUSTRIA, FILETTATURA GAS CONICA PER TUBI, IN CASSETTA DI LEGNO Hss threading sets for industry, NPT thread, in wood boxes

17020636

NPT €

cod.

17025635 HSS-G

cad/each

N° 1 - 3 - 5

1.861,480

Misure/Dimensions: 672x445x64 mm

Legno Wood

Composizione Description

1 pcs 1/8 - 1/4 - 3/8 1/2 - 3/4 - 1”

30x11 - 38x14 45x18 - 55x22 65x25

N° 2 - 4 - 7

17020636 HSS-G

6.809,713

Misure/Dimensions: 973x397x162 mm

1 pcs 1/8 - 1/4 - 3/8 - 1/2 3/4 - 1” - 1.1/4 1.1/2 - 2”

17025635

n 22

30x11 - 38x14 45x14 - 45x18 55x22 - 65x25 75x30 - 90x36 105x36

ASSORTIMENTI A FILETTARE IN HSS PER GARAGE ED INDUSTRIA, FILETTATURA WHITWORTH PASSO GROSSO , IN CASSETTA DI LEGNO Hss threading sets for garages and industry, Whitworth thread, in wood boxes

17025619

17025620

17025621

17025622

BSW €

cod.

cad/each

Composizione Description N° 1 - 2

Valigetta in metallo Metal box

17025619

958,947

HSS-G

3 pcs 1/8 - 3/16 - 1/4 5/16 - 3/8 - 7/16 1/2

20x5 - 20x7 - 25x9 30x11 - 38x14

N° 1

Misure/Dimensions: 610x413x55 mm

17025621 HSS-G

1/4 - 5/16 - 3/8 - 7/16 1/2 - 9/16 - 5/8 - 3/4

n 22

20x7 - 25x9 30x11 - 38x14 45x18

N° 1 - 4

1.621,745

3 pcs

Misure/Dimensions: 683x406x58 mm

1/4 - 5/16 - 3/8 7/16 - 1/2 - 5/8 3/4 - 7/8 - 1”

17025622

3 pcs

20x7 - 25x9 - 30x11 38x14 - 45x18 55x22

N° 1 - 3 - 6 HSS-G

4.463,321

Misure/Dimensions: 680x408x57 mm

1/4 - 5/16 - 3/8 - 7/16 1/2 - 5/8 - 3/4 - 7/8 1” - 1.1/8 - 1.1/4 1.3/8 - 1.1/2

n 22

20x7 - 25x9 30x11 - 38x14 45x18 - 55x22 65x25

ASSORTIMENTI SETS

Legno Wood

3 pcs

HSS-G

N° 1 - 3

1.085,862

17025620

379

ASSORTIMENTI A FILETTARE IN HSS PER GARAGE ED INDUSTRIA, FILETTATURA WHITWORTH , IN CASSETTA DI LEGNO Hss threading sets for garages and industry, Whitworth thread, in wood boxes

17025631

BSF €

cod.

17025630 HSS-G

cad/each

Composizione Description N° 1 - 3

1.029,459

2 pcs 1/4 - 5/16 - 3/8 7/16 - 1/2 - 5/8 - 3/4

17025631

2 pcs

n 22

1/4 - 5/16 - 3/8 - 7/16 1/2 - 5/8 - 3/4 - 7/8 1”

20x7 - 25x9 30x11 - 38x10 45x14 - 55x22

Legno Wood Valigetta in metallo Metal box

20x7 - 25x9 30x11 - 38x10 45x14

Misure/Dimensions: 595x400x52 mm

HSS-G

N° 1 - 4

1.692,256

Misure/Dimensions: 683x406x93 mm

17020523

BSW+BSF

cod.

€ cad/each

Composizione Description N° 1 - 3

Valigetta in metallo Metal box

17020523 HSS-G

2.217,210

BSW 3 pcs BSF 2 pcs 1/4 - 5/16 - 3/8 - 7/16 1/2 - 5/8 - 3/4

ASSORTIMENTI SETS

Metallo Metal

380

17025630

20x7 - 25x9 30x11 - 38x14 45x18

ASSORTIMENTI A FILETTARE IN HSS PER GARAGE ED INDUSTRIA, FILETTATURA UNC E UNF, IN CASSETTA DI LEGNO

Hss threading sets for garages and industry, UNC and UNF thread, in wood boxes

€

cod.

Valigetta in metallo Metal box

cad/each

N° 1 - 2

17020528

777,030

3 pcs

1.071,764

2 pcs

HSS-G

Misure/Dimensions: 394x210x45 mm

17020525 HSS-G

17020526 HSS-G

1/4 - 5/16 - 3/8 7/16 - 1/2

20x7 - 25x9 30x11 - 38x10

N° 1 - 3

Misure/Dimensions: 595x400x52 mm

Legno Wood

Composizione Description

1/4 - 5/16 - 3/8 - 7/16 1/2 - 5/8 - 3/4

n 22

20x7 - 25x9 30x11 - 38x14 45x18

N° 1 - 2

1.848,792

3 pcs

Misure/Dimensions: 683x406x58 mm

1/4 - 5/16 - 3/8 - 7/16 1/2 - 5/8 - 3/4 - 7/8 1”

17020527

3 pcs

20x7 - 25x9 30x11 - 38x10

N° 1 - 3 - 6 HSS-G

5.224,841

Misure/Dimensions: 680x408x57 mm

17020530

17020531

1/4 - 5/16 - 3/8 - 7/16 1/2 - 5/8 - 3/4 - 7/8 1” - 1.1/8 - 1.1/4 1.3/8 - 1.1/2

n 22

20x7 - 25x9 30x11 - 38x14 45x18 - 55x22 65x25

17020532

UNF €

cod.

17020530 HSS-G

cad/each

Composizione Description N° 1 - 3

1.044,971

2 pcs

Misure/Dimensions: 595x400x52 mm

1/4 - 5/16 - 3/8 7/16 - 1/2 - 5/8 3/4

17020531

2 pcs

HSS-G

N° 1 - 4

1.795,196

Misure/Dimensions: 683x406x58 mm

17020532 HSS-G

20x7 - 25x9 30x11 - 38x10 45x14

4.822,932

Misure/Dimensions: 680x408x57 mm

1/4 - 5/16 - 3/8 - 7/16 1/2 - 5/8 - 3/4 - 7/8 1”

2 pcs 1/4 - 5/16 - 3/8 - 7/16 1/2 - 5/8 - 3/4 - 7/8 1” - 1.1/8 - 1.1/4 1.3/8 - 1.1/2

17020533

n 22

20x7 - 25x9 30x11 - 38x10 45x14 - 55X16

N° 1 - 3 - 6 20x7 - 25x9 - 30x11 38x14 - 45x14 55x16 - 65x18

UNC+UNF €

cod.

17020533 HSS-G

cad/each

Composizione Description

ASSORTIMENTI SETS

17020527

17020526

UNC

17020525

17020528

N° 1 - 3

2.217,210

Misure/Dimensions: 690x425x93 mm

UNC 3 pcs UNF 2 pcs 1/4 - 5/16 - 3/8 - 7/16 1/2 - 5/8 - 3/4

20x7 - 25x9 30x11 - 38x14 45x18

381

ASSORTIMENTI A FILETTARE AL CROMO VANADIO (CV)

ASSORTIMENTI SETS

CHROME VANADIUM (CV) THREADING SETS

382

ASSORTIMENTI A FILETTARE AL CV, FILETTATURA METRICA, IN ASTUCCI DI METALLO E ABS CV threading sets, coarse metric thread, in metal and plastic boxes

09030505

09030504

M+MF cod.

€ cad/each

Composizione Description 1 pcs

N° 1.1/2

25.4

25,4

M 3x0,5 - 4x0,7 5x0,8 - 6x1 - 7x1 8x1 - 8x1,25 10x1,25 - 10x1,5 12x1,5 - 12x1,75

1 contafiletti 1 pitch gauge

3 pcs

N° 1.1/2

25.4

25,4

M 3x0,5 - 4x0,7 5x0,8 - 6x1 - 7x1 8x1 - 8x1,25 10x1,25 - 10x1,5 12x1,5 - 12x1,75

1 contafiletti 1 pitch gauge

09030505 CV

30 pcs

94,080

11 passi 11 threads

2,5 - 3,3 - 4,2 - 5 - 6,8

09030504 CV

30 pcs

76,440

11 passi 11 threads

17005402

cod. 17005401 CV

21 pcs

€ cad/each

57,107

17005402 CV

Astucci metallo Metal case

29 pcs

3 pcs M 3-4-5-6 8 - 10 - 12

3 pcs

N°1.1/2

M 3-4-5-6 8 - 10 - 12

2,5 - 3,3 - 4,2 - 5 6,8 - 8,5 - 10,25

17005404

Abs

17005404 CV

€ cad/each

51,051

Composizione Description

cod.

1 pcs

N°1.1/2

M 3-4-5-6 8 - 10 - 12

2,5 - 3,3 - 4,2 - 5 6,8 - 8,5 - 10,25

ASSORTIMENTI SETS

Astucci metallo Metal case

88,842

Composizione Description

17005401

383

ASSORTIMENTI A FILETTARE AL CV, FILETTATURA METRICA, IN CASSETTA DI LEGNO CV threading sets, metric thread, in wood box

17012531

cod.

€ cad/each

17012530 CV

6 passi 6 threads

175,502

17012531 8 passi 8 threads

207,657

17012533

N° 1

25.4

25,4

3 pcs

N° 1

25.4

25,4

M3-4-5-6 7 - 8 - 9 - 10

Misure/Dimensions: 432x227x50 mm

17012532

3 pcs

M 3 - 4 - 5 - 6 - 8 - 10

Misure/Dimensions: 320x218x38 mm

Composizione Description

17012543

M+MF

cod.

€ cad/each

17012532 CV

7 passi 7 threads Misure/Dimensions: 320x218x38 mm

211,670

10 passi 10 threads Misure/Dimensions: 517x305x50 mm

3 pcs

N° 1.1/2

25.4

25,4

M 3 - 4 - 5 - 6 - 8 - 10 - 12

3 pcs

17012533 CV

Composizione Description

308,134

N° 1 - 2 25,4 (7)

n 22

38,1 (3)

25,4 - 38,1

M3-4-5-6 7 - 8 - 9 - 10 - 11 - 12

2 pcs 25,4 (7)

17012543 CV

12 passi 12 threads

ASSORTIMENTI SETS

Misure/Dimensions: 528x312x48 mm

384

N° 0 - 2

341,627

38,1 (3) M 3x0.5 - 4x0,7 - 5x0,8 6x1 - 7x1 - 8x1 8x1,25 - 10x1,25 10x1,5 - 12x1,25 12x1,5 - 12x1,75

25,4 38,1

N° 1

17012530

ASSORTIMENTI A FILETTARE AL CV, FILETTATURA METRICA, IN CASSETTA DI LEGNO CV threading sets, metric thread, in wood box

17012535

M €

cod.

cad/each

3 pcs

17012534 CV

N° 1 - 3 25,4 (5)

399,234

10 passi 10 threads

38,1 (5)

3 pcs

17012535 CV

467,560

11 passi 11 threads

N° 1 - 3 25,4 (5)

n 22

38,1 (6)

25,4 - 38,1

M 3 - 4 - 5 - 6 - 8 - 10 12 - 14 - 16 - 18 - 20

Misure/Dimensions: 680x380x53 mm

17012537

M € cad/each

Composizione Description 3 pcs

17012536 CV

10 passi 10 threads Misure/Dimensions: 690x396x53 mm

N° 2 - 4 38,1 (5)

569,374

50,8 (5)

3 pcs

17012537

N° 1 - 2 - 4 25,4 (5)

38,1 (4)

609,568

13 passi 13 threads

38,1 - 50,8

M 6 - 8 - 10 - 12 - 14 16 - 18 - 20 - 22 - 24

50,8 (4)

cod.

n 22 25,4 - 38,1 - 50,8

M 3 - 4 - 5 - 6 - 8 - 10 12 - 14 - 16 - 18 - 20 22 - 24

Misure/Dimensions: 680x418x58 mm

17012539

cad/each

3 pcs

17012538 CV

Composizione Description

25,4(5) - 38,1(5)

1.694,719

15 passi 15 threads Misure/Dimensions: 700x435x100 mm

N° 1 - 3 - 5

50,8(5) - 63,5(5) M 3-4-5-6-8-10-12-14 16-18-20-22-24-27-30

3 pcs

17012539 CV

19 passi 19 threads

2.443,619

Misure/Dimensions: 700x435x100 mm

25,4 - 38,1 50,8 - 63,5

N° 1 - 3 - 6 25,4 (7) 38,1 (4) 50,8 (5) 63,5 (4)

n 22 25,4 - 38,1 50,8 - 63,5

M3-4-5-6-7-8-9 10 - 11 - 12 - 14 - 16 18 - 20 - 22 - 24 - 27 30 - 33

385

ASSORTIMENTI SETS

€

cod.

17012538

25,4 - 38,1

M 3 - 4 - 5 - 6 - 8 - 10 12 - 14 - 16 - 18

Misure/Dimensions: 583x310x50 mm

17012536

Composizione Description

17012534

ASSORTIMENTI A FILETTARE AL CV, FILETTATURA METRICA E BS IN CASSETTA DI LEGNO

/UNC,

CV threading sets, metric and BSW/ NC thread, in wood box

17012541

17012542

COMBI M+BSW M+UNC cod.

€ cad/each

Composizione Description 3 pcs

N° 1 - 2 - 4 25,4 - 38,1 - 50,8

17012541 CV

1.614,344

M 3 - 4 - 5 - 6 - 8 - 10 12 - 14 - 16 - 18 - 20 22 - 24 BSW 1/8 - 5/32 - 3/16 - 1/4 5/16 - 3/8 - 7/16 - 1/2 9/16 - 5/8 - 3/4 - 7/8 1”

N° 1 - 2 - 4

n 22

3 pcs

25,4 - 38,1 - 50,8 Misure/Dimensions: 648x413x84 mm

17012542 CV

1.627,733

M 3 - 4 - 5 - 6 - 8 - 10 12 - 14 - 16 - 18 - 20 22 - 24

ASSORTIMENTI SETS

UNC 1/4 - 5/16 - 3/8 - 7/16 1/2 - 9/16 - 5/8 - 3/4 7/8 - 1”

386

CV threading sets, special for automotive, metric thread, in wood box

17012510

FIAT RIDOTTO - M+MF

cod.

€ cad/each

Composizione Description 2 pcs

N° 1 - 3 25,4 (8)

17012510

38,1 (12)

65 pcs

SPECIALE PER GARAGE SPECIAL FOR AUTOMOTIVE

ASSORTIMENTI A FILETTARE AL CV, PER GARAGE TIPO "FIAT RIDOTTO", FILETTATURA METRICA, IN CASSETTA DI LEGNO

448,806

20 passi 20 threads

25,4 - 38,1

M 2x0,4 - 3x0,5 - 4x0,7 5x0,8 - 6x1 - 7x1 - 8x1 8x1,25 - 10x1 - 10x1,25 10x1,5 - 12x1,25 12x1,5 - 12x1,75 14x1,25 - 14x1,5 14x2 - 16x1,5 16x2 - 18x1,5

Misure/Dimensions: 635x335x52 mm Kg. 5,8

CV threading sets, special for trucks, metric thread, in wood box

FIAT GRANDE - M+MF

cod.

€ cad/each

Composizione Description 3 pcs

17012512 CV

111 pcs

1.090,515

26 passi 26 pitch

3 x 0,5 4 x 0,7 5 x 0,8 6x1 7x1 8 x 0,75 8x1 8 x 1,25 10 x 1 10 x 1,5 11 x 0,75 12 x 1 12 x 1,5 12 x 1,75

N° 1 - 2 - 3 - 4 14 x 1 14 x 1,5 14 x 2 16 x 1 16 x 1,5 16 x 2 18 x 1,5 20 x 1,5 20 x 2,5 22 x 1,5 24 x 1,5 24 x 2

3 pcs

17012513 CV

Misure/Dimensions: 600x430x77 mm Kg. 13,8

114 pcs 30 passi 30 pitch

1.199,032

3 x 0,5 4 x 0,7 5 x 0,8 6x1 7x1 8x1 8 x 1,25 9x1 9 x 1,25 10 x 1 10 x 1,25 10 x 1,5 12 x 1 12 x 1,25 12 x 1,5 12 x 1,75

25,4 - 38,1 - 50,8

N° 1 - 3 - 4 14 x 1 14 x 1,25 14 x 1,5 14 x 2 16 x 1 16 x 1,5 16 x 2 18 x 1,5 20 x 1,5 20 x 2,5 22 x 1,5 22 x 2 24 x 1,5 24 x 2

n 22

25,4 - 38,1 - 50,8

N.1

ASSORTIMENTI SETS

17012513

17012512

SPECIALE PER CAMION SPECIAL FOR TRUCKS

ASSORTIMENTI A FILETTARE AL CV, PER GARAGE TIPO "FIAT GRANDE", SPECIALE PER CAMION, FILETTATURA METRICA, IN CASSETTA DI LEGNO

387

SPECIALE PER GARAGE SPECIAL FOR AUTOMOTIVE

ASSORTIMENTI A FILETTARE AL CV, PER GARAGE TIPO "FIAT", FILETTATURA METRICA, IN CASSETTA DI LEGNO CV threading sets, special for automotive, metric thread, in wood box

17012500

FIAT CLASSIC - M+MF

cod.

FIAT

€ cad/each

17012500 CV

110 pcs

610,496

35 passi 35 pitch

Confezione Packaging

ASSORTIMENTI SETS

Misure/Dimensions: 500x340x70 mm Kg. 7,9

388

Composizione Description 2 pcs

25,4 (14) 38,1 (21)

2 x 0,4 3 x 0,5 4 x 0,7 5 x 0,8 6 x 0,75 6x1 7 x 0,75 7x1 8 x 0,75 8x1 8 x 1,25 9 x 0,75 9x1 9 x 1,25 10 x 0,75 10 x 1 10 x 1,25 10 x 1,5

11 x 0,75 11 x 1 11 x 1,25 11 x 1,5 12 x 0,75 12 x 1 12 x 1,25 12 x 1,5 12 x 1,75 14 x 1 14 x 1,25 14 x 1,5 14 x 2 16 x 1 16 x 1,5 16 x 2 18 x 1,5

N° 1 - 3

25,4 - 38,1

N.1

Per ravvivare i filetti di: To renew threads of: FIAT, ALFA R M , LANCIA, V LKSWA N, BMW, M RC D S, F RD, P L .M., P T, R NA LT, V LV , CITR N, T TA, NISSAN, H NDA, TC.

CV threading sets, special for automotive, metric thread, in wood box

17012505

FIAT PLUS - M+MF

cod.

FIAT

€ cad/each

17012505 CV

111 pcs 35 passi 35 pitch

643,060

Composizione Description 2 pcs

25,4 (14) 38,1 (21)

2 x 0,4 3 x 0,5 4 x 0,7 5 x 0,8 6 x 0,75 6x1 7 x 0,75 7x1 8 x 0,75 8x1 8 x 1,25 9 x 0,75 9x1 9 x 1,25 10 x 0,75 10 x 1 10 x 1,25 10 x 1,5

11 x 0,75 11 x 1 11 x 1,25 11 x 1,5 12 x 0,75 12 x 1 12 x 1,25 12 x 1,5 12 x 1,75 14 x 1 14 x 1,25 14 x 1,5 14 x 2 16 x 1 16 x 1,5 16 x 2 18 x 1,5

SPECIALE PER GARAGE SPECIAL FOR AUTOMOTIVE

ASSORTIMENTI A FILETTARE AL CV, PER GARAGE TIPO "FIAT", FILETTATURA METRICA, IN CASSETTA DI LEGNO

N° 1 - 3

25,4 - 38,1

N.1

0÷150 mm 0,01 Digital

Confezione Packaging

ASSORTIMENTI SETS

Misure/Dimensions: 500x340x70 mm Kg. 8,0

389

ASSORTIMENTI A FILETTARE AL CV PER GARAGE ED INDUSTRIA, FILETTATURA WHITWORTH , IN CASSETTA DI LEGNO CV threading sets for garages and industry, Whitworth thread, in wood boxes

17012521

17012522

BSW €

cod.

cad/each

Composizione Description 3 pcs

17012520

25,4 - 38,1

355,016

BSW 1/8 - 5/32 - 3/16 1/4 - 5/16 - 3/8 7/16 - 1/2

Misure/Dimensions: 520x305x50 mm

3 pcs

708,708

Misure/Dimensions: 685x419x60 mm

25,4 - 38,1 - 50,8 BSW 1/8 - 5/32 - 3/16 1/4 - 5/16 - 3/8 7/16 - 1/2 - 9/16 5/8 - 3/4 - 7/8-1”

3 pcs

N° 1 - 2 - 4

n 22

17012521

17012522

N° 1 - 2

2.159,603

Misure/Dimensions: 695x430x99 mm

N° 1 - 3 - 6 25,4 - 38,1 50,8 - 63,5

BSW 1/8 - 5/32 - 3/16 - 1/4 5/16 - 3/8 - 7/16 - 1/2 9/16 - 5/8 - 3/4 - 7/8 1” - 1.1/8 - 1.1/4 1.3/8 - 1.1/2

17012525

BSF

cod.

€ cad/each

Composizione Description 2 pcs

17012525 CV

ASSORTIMENTI SETS

Misure/Dimensions: 610x393x87 mm

390

17012520

N° 1 - 4 25,4 - 38,1 - 50,8

699,330 BSF 1/4 - 5/16 - 3/8 - 7/16 1/2 - 9/16 - 5/8 - 3/4 7/8 - 1”

ASSORTIMENTI A FILETTARE AL CV PER GARAGE ED INDUSTRIA, FILETTATURA WHITWORTH , IN CASSETTA DI LEGNO CV threading sets for garages and industry, Whitworth thread, in wood boxes

17012529

BSW+BSF €

cod.

cad/each

Composizione Description BSW 3 pcs BSF 2 pcs

17012528

814,537

Misure/Dimensions: 657x313x78 mm

25,4 - 38,1 - 50,8 1/4 - 5/16 - 3/8 - 7/16 1/2 - 9/16 - 5/8 - 3/4

BSW 3 pcs BSF 2 pcs

17012529 CV

N° 1 - 3

1.106,594

Misure/Dimensions: 615x390x87 mm

N° 1 - 4

17012528

n 22

25,4 - 38,1 - 50,8 1/4 - 5/16 - 3/8 - 7/16 1/2 - 9/16 - 5/8 - 3/4 7/8 - 1”

ASSORTIMENTI A FILETTARE AL CV, FILETTATURA GAS CILINDRICA PER TUBI, IN CASSETTA DI LEGNO CV threading sets, BSP theread, in wood boxes

17012516

BSP

cad/each

Composizione Description 2 pcs

17012515

857,405

Misure/Dimensions: 600x433x77 mm

38,1 - 50,8 - 63,5 1/8 - 1/4 - 3/8 1/2 - 3/4 - 1”

2 pcs

17012516 CV

1.935,867

Misure/Dimensions: 697x476x97 mm

N° 3 - 5

1/4 - 3/8 - 1/2 - 3/4 1” - 1.1/4 - 1.1/2

N° 4 - 7

n 22

38,1 - 50,8 63,5 - 76,2

ASSORTIMENTI SETS

€

cod.

17012515

391

ASSORTIMENTI A FILETTARE AL CV, FILETTATURA GAS CONICA PER TUBI, IN CASSETTA DI LEGNO CV threading sets, BSPT and NPT theread, in wood boxes

BSPT

17012540 €

cod.

cad/each

Composizione Description 1 pc

17012540 CV

1.149,462

Misure/Dimensions: 672x445x64 mm

1/8 - 1/4 - 3/8 1/2 - 3/4 - 1”

N° 1 - 3 - 5 30x11 - 38x14 45x18 - 55x22 65x25

NPT

17012545 €

cod.

cad/each

Composizione Description 1 pc

17012545 CV

1.149,462

Misure/Dimensions: 672x445x64 mm

1/8 - 1/4 - 3/8 1/2 - 3/4 - 1”

N° 1 - 3 - 5 30x11 - 38x14 45x18 - 55x22 65x25

ASSORTIMENTI A FILETTARE AL CV PER GARAGE ED INDUSTRIA, FILETTATURA UNC, IN CASSETTA DI LEGNO

CV threading sets for garages and industry, UNC theread, in wood boxes UNC

17012562 €

cod.

cad/each

Composizione Description 3 pcs

17012560

635,021

Misure/Dimensions: 687x418x56 mm

25,4 - 38,1 - 50,8 1/4 - 5/16 - 3/8 - 7/16 1/2 - 9/16 - 5/8 - 3/4

3 pcs

17012561

811,861

ASSORTIMENTI SETS

Misure/Dimensions: 610x393x87 mm

392

n 22

1/4 - 5/16 - 3/8 - 7/16 1/2 - 9/16 - 5/8 - 3/4 7/8 - 1”

2.544,098

Misure/Dimensions: 610x393x87 mm

N° 1 - 4

25,4 - 38,1 - 50,8

3 pcs

17012562

N° 1 - 3

1/4 - 5/16 - 3/8 - 7/16 1/2 - 9/16 - 5/8 - 3/4 7/8 - 1” - 1.1/8 - 1.1/4 1.3/8 - 1.1/2

N° 1 - 3 - 6

n 22

25,4 - 38,1 50,8 - 63,5

17012561

17012560

ASSORTIMENTI A FILETTARE AL CV PER GARAGE ED INDUSTRIA, FILETTATURA UNC E UNF, IN CASSETTA DI LEGNO

CV threading sets for garages and industry, UNC and UNF theread, in wood boxes

UNF

17012567 €

cod.

cad/each

Composizione Description 2 pcs

17012565

600,191

Misure/Dimensions: 655x400x55 mm

25,4 - 38,1 - 50,8 1/4 - 5/16 - 3/8 - 7/16 1/2 - 9/16 - 5/8 - 3/4

2 pcs

17012566

739,511

Misure/Dimensions: 610x393x87 mm

n 22

1/4 - 5/16 - 3/8 - 7/16 1/2 - 9/16 - 5/8 - 3/4 7/8 - 1”

2.450,321 1/4 - 5/16 - 3/8 - 7/16 1/2 - 9/16 - 5/8 - 3/4 7/8 - 1” - 1.1/8 - 1.1/4 1.3/8 - 1.1/2

Misure/Dimensions: 610x393x87 mm

N° 1 - 3 - 6

n 22

25,4 - 38,1 50,8 - 63,5

UNC+UNF

17012571

17012570 CV

cad/each

Composizione Description UNC 3 pcs UNF 2 pcs

1.239,226

Misure/Dimensions: 657x313x78 mm

25,4 - 38,1 - 50,8 1/4 - 5/16 - 3/8 - 7/16 1/2 - 9/16 - 5/8 - 3/4

UNC 3 pcs UNF 2 pcs

17012571 CV

N° 1 - 4

n 22

1.539,320

Misure/Dimensions: 615x390x87 mm

N° 1 - 3

25,4 - 38,1 - 50,8 1/4 - 5/16 - 3/8 - 7/16 1/2 - 9/16 - 5/8 - 3/4 7/8 - 1”

ASSORTIMENTI SETS

€

cod.

17012570

N° 1 - 4

25,4 - 38,1 - 50,8

2 pcs

17012567

N° 1 - 3

17012566

17012565

393

RIPRISTINO DELLE FILETTATURE THREAD REPAIR

394

KIT MONODIMENSIONALI METRICI PER IL RIPRISTINO DELLE FILETTATURE DANNEGGIATE Thread repair kit

10600

KIT MONODIMENSIONALI

One dimensional kit

1,5 d

Ø M

407

10618

2 2,5 3 3,5 4 5 6 7 8 8 9 10 10 10 11 12 12 12 12 14 14 14 14 16 16 18 18 18 20 20 20 22 22 22 24 24 24

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

0,4 0,45 0,5 0,6 0,7 0,8 1 1 1,25 1 1,25 1,5 1,25 1 1,5 1,75 1,5 1,25 1 2 1,5 1,25 1 2 1,5 2,5 2 1,5 2,5 2 1,5 2,5 2 1,5 3 2 1,5

2,1 mm 2,6 mm 3,2 mm 3,7 mm 4,2 mm 5,2 mm 6,3 mm 7,3 mm 8,3 mm 8,3 mm 9,3 mm 10,4 mm 10,3 mm 10,3 mm 11,4 mm 12,4 mm 12,4 mm 12,3 mm 12,3 mm

N° 2 3 4 5 6 8 9 10 11 11 12 13 13 13 14 15 15 15 15 16 16 17 17 18 18 20 20 20 21 21 21 22 22 22 23 23 23

N° 2 3 4 5 6 8 9 11 11 11 12 13 13 13 14 15 15 15 15

€

pcs

cod.

cad/each

20 20 20 20 20 20 20 20 20 20 15 15 15 15 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5

10600098 10600099 10600100 10600101 10600102 10600103 10600104 10600105 10600106 10600107 10600108 10600109 10600110 10600111 10600112 10600113 10600114 10600115 10600116 10600117 10600118 10600119 10600120 10600121 10600122 10600123 10600124 10600125 10600126 10600127 10600128 10600129 10600130 10600131 10600132 10600133 10600134

38,261 38,261 38,261 38,261 38,261 37,682 40,551 45,794 45,794 45,794 57,240 55,319 55,319 55,319 61,989 61,989 61,989 61,989 61,989 65,321 65,321 65,321 65,321 79,141 79,141 94,660 94,660 94,660 101,641 101,641 101,641 124,048 124,048 124,048 142,943 142,943 142,943

M 1,5 d

Ø M

26 27 27 27 28 30 30 30 33 33 36 36 36 36

x x x x x x x x x x x x x x

1,5 3 2 1,5 1,5 3,5 2 1,5 3,5 2 4 3 2 1,5

€

pcs

cod.

cad/each

1 1 1 1 1 1 1 1 1 1 1 1 1 1

10 10 10 10 10 10 10 10 10 10 10 10 10 10

10600135 10600136 10600137 10600138 10600139 10600140 10600141 10600142 10600143 10600144 10600145 10600146 10600147 10600148

509,497 509,497 509,497 509,497 591,436 622,319 622,319 622,319 649,630 649,630 706,643 706,643 706,643 706,643

Filetto danneggiato Damaged thread

395

KIT PRURIDIMENSIONALI METRICI PER IL RIPRISTINO DELLE FILETTATURE Thread repair kit

10605

KIT PLURIDIMENSIONALI

Multi-dimensional kit

1,5 d

407

396

cod.

cad/each

M5-M12

5 6 8 10 12

x x x x x

0,8 1 1,25 1,5 1,75

5,2 mm 6,3 mm 8,3 mm 10,4 mm 12,4 mm

N° 8 9 11 13 15

25 25 25 25 10

10605100

235,672

M6-M14x1,25

6 8 10 12 14

x x x x x

1 1,25 1,5 1,75 1,25

6,3 mm 8,3 mm 10,4 mm 12,4 mm

9 11 13 15 17

9 11 13 15

25 25 25 10 10

10605101

265,034

M6-M14x1,25

6 8 10 12 *14

x x x x x

1 1,25 1,5 1,75 1,25

6,3 mm 8,3 mm 10,4 mm 12,4 mm

9 11 13 15 17

9 11 13 15

25 25 25 10 10

10605102

273,314

M6-M10

6 8 10

x x x

1 1,25 1,5

6,3 mm 8,3 mm 10,4 mm

9 11 13

25 25 25

10605099

153,754

10618

€

pcs

KIT MONODIMENSIONALI METRICI PER IL RIPRISTINO DELLE FILETTATURE - SPECIALE PER CANDELE Thread repair kit

10631

KIT MONODIMENSIONALI - SPECIALE PER CANDELE One dimensional kit- Special for spark plugs

8,40 d

STI M

Ricambio Spare part

1,25

N° 17

16,40 d

€

pcs

cod.

cad/each

10631100

87,090

Filetto Thread M

12,40 d

pcs

€

pcs

cod.

cad/each

1,25

8,4

1060614x12508

1,538

1,25

12,4

1060614x12512

1,538

1,25

16,4

1060614x12516

1,538

Filetto danneggiato Damaged thread

M 1,5 d

STI M

401

12 10 10 10 8 6

x x x x x x

1,25 1,5 1.25 1 1,25 1

N° 15 N° 13 N° 13 N° 13 N° 11 N° 9

€

pcs

cod.

cad/each

10 10 10 10 10 10

10631115 10631114 10631113 10631112 10631111 10631110

123,098 93,645 93,645 93,645 91,670 76,014

10606

397

KIT METRICI PER IL RIPRISTINO DELLE FILETTATURE SPECIALE PER CANDELE E CANDELETTE Thread repair kit, special for spark plugs and glow plugs

10631130

KIT MONODIMENSIONALE - SPECIALE PER CANDELE M14

1 25

One dimensional kit- Special for spark plugs M14 X 1,25

Ø M5-M12

1,25

9,5 mm

11,2 mm

12,7 mm

17,5 mm

pcs

cod.

cad/each

10631130

108,912

€

HEX 18mm

M 14x1,25 M 16x1,25

M 16x1,25 M 16x1,25

L l

M 16x1,25

M 16x1,25 M 14x1,25

M 14x1,25

Danneggiato Damaged Inserto solido Solid thread insert

Maschio combinato / Combined tap Ricambi Spare parts

Ø M

1,25

€

pcs

cod.

cad/each

1062616x125

88,855

Inserto solido / Solid insert mm

Ricambi Spare parts

10631205

€

HSS

pcs

cod.

cad/each

1,25

9,5

1062714x12509

7,056

1,25

11,2

1062714x12511

7,291

1,25

12,7

1062714x12512

7,291

1,25

17,5

1062714x12517

7,644

KIT PLURIDIMENSIONALE - SPECIALE PER CANDELETTE 8-10-12 MM

One dimensional kit- Special for spark plugs 8-10-12 MM

12 mm

M 8x1 - M 10x1 - M 10x1,25 M 12x1 - M 12x1,25 - M 14x1,25

€

pcs

cod.

cad/each

M 8x1 - M 10x1 M 10x1,25 - M 12x1

10631205

339,516

Abs Inserto solido Solid thread insert Il set contiene un’asta di montaggio, con relativa impugnatura, 3 tappi e 2 utensili inseritori. This set contains 1 insert fitting rod, its grip handle, 3 plug end blanks and 2 insert fitting tools.

398

KIT PER IL RIPRISTINO DELLE FILETTATURE DANNEGGIATE Thread repair kit

10600

HIT

ORTH E GAS BSW

KIT MONODIMENSIONALI One dimensional kit

1,5 d

Ø 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1”

x x x x x x x x x x x x

40 24 20 18 16 14 12 12 11 10 9 8

3,4 mm 5,0 mm 6,7 mm 8,3 mm 9,9 mm 11,5 mm 13,0 mm

N° 4 8 9 10 12 14 15 16 18 20 22 23

N° 4 8 9 11 12 14 15

€

pcs

cod.

cad/each

20 20 20 20 15 10 10 10 10 5 5 4

10600168 10600169 10600170 10600171 10600172 10600173 10600174 10600175 10600176 10600177 10600178 10600179

55,497 55,497 49,977 61,237 65,328 73,322 80,492 108,083 108,083 137,347 167,411 159,292

BSF 1,5 d

407

3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1”

10618

x x x x x x x x x x x

32 26 22 20 18 16 16 14 12 11 10

5,0 mm 6,6 mm 8,3 mm 9,9 mm 11,5 mm 13,0 mm

N° 7 9 11 13 14 15 16 18 20 22 23

N° 6 9 11 13 14 15

€

pcs

cod.

cad/each

20 20 20 15 10 10 10 10 5 5 4

10600185 10600180 10600181 10600182 10600183 10600184 10600186 10600187 10600188 10600189 10600190

55,497 49,977 61,237 65,328 73,322 80,492 108,083 108,083 137,347 167,411 159,292

BSP 1,5 d

Ø G

10605

1/8 1/4 3/8 1/2 5/8 3/4 7/8 1”

x x x x x x x x

28 19 19 14 14 14 14 11

€

pcs

cod.

cad/each

1 1 1 1 1 1 1 1

10 10 10 10 10 10 10 10

10600191 10600192 10600193 10600194 10600195 10600196 10600197 10600198

134,958 146,837 157,629 200,508 449,143 449,143 617,566 617,566

BSW-BSF

KIT PLURIDIMENSIONALE Multi-dimensional kit

1,5 d

€

pcs

cod.

cad/each

BSW 1/4 - 1/2

1/4 5/16 3/8 7/16 1/2

x x x x x

20 18 16 14 12

6,7 mm 8,3 mm 9,9 mm 11,5 mm 13,0 mm

N° 9 10 12 14 15

9 11 12 14 15

25 25 25 10 10

10605105

313,854

BSF 1/4 - 1/2

1/4 5/16 3/8 7/16 1/2

x x x x x

20 18 16 14 12

6,7 mm 8,3 mm 9,9 mm 11,5 mm 13,0 mm

N° 9 10 12 14 15

9 11 12 14 15

25 25 25 10 10

10605106

313,854

399

KIT PER IL RIPRISTINO DELLE FILETTATURE DANNEGGIATE - UNC E UNF Thread repair kit

10600

UNC

KIT MONODIMENSIONALI One dimensional kit

1,5 d

Ø No.

UNC

6 8 10 12 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1”

x x x x x x x x x x x x x x

32 32 24 24 20 18 16 14 13 12 11 10 9 8

3,8 mm 4,4 mm 5,2 mm 5,8 mm 6,7 mm 8,3 mm 9,9 mm 11,6 mm 13,0 mm

N° 5 6 7 8 9 10 12 14 15 16 18 20 22 23

N° 5 6 6 8 9 10 12 14 15

cod.

cad/each

20 20 20 20 20 20 15 10 10 10 10 5 5 4

106001481 10600149 106001490 106001491 10600150 10600151 10600152 10600153 10600154 10600155 10600156 10600157 10600158 10600159

61,665 61,665 61,665 61,665 55,528 68,041 72,591 81,472 89,435 120,094 120,094 152,602 186,019 176,990

1,5 d

Ø UNC

407

1.1/8 1.1/4 1.1/2

x x x

7 7 6

€

pcs

€

pcs

cod.

cad/each

1 1 1

10 10 10

106001590 106001591 106001592

551,010 607,488 814,037

10618

UNF 1,5 d

Ø No. UNF

6 8 10 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1”

x x x x x x x x x x x x x

40 36 32 28 24 24 20 20 18 18 16 14 12

3,8 mm 4,4 mm 5,1 mm 6,7 mm 8,3 mm 9,8 mm 11,5 mm 13,0 mm

N° 5 6 8 9 11 13 14 15 16 18 21 22 23

N° 5 6 8 9 11 13 14 15

cod.

cad/each

20 20 20 20 20 15 10 10 10 10 5 5 4

106001597 106001598 106001599 10600160 10600161 10600162 10600163 10600164 10600165 10600166 10600167 106001670 106001671

61,665 61,665 61,665 55,528 68,041 72,591 81,472 89,435 120,094 120,094 152,602 186,019 176,990

1,5 d

Ø UNF

10605

1.1/8 1.1/4 1.1/2

x x x

12 12 12

€

pcs

cod.

cad/each

1 1 1

10 10 10

106001672 106001673 106001674

550,790 607,488 814,037

KIT PLURIDIMENSIONALE

UNC-UNF

Multi-dimensional kit

1,5 d

400

€

pcs

€

pcs

cod.

cad/each

UNC 1/4 - 1/2

1/4 5/16 3/8 7/16 1/2

x x x x x

20 18 16 14 13

6,7 mm 8,3 mm 9,9 mm 11,5 mm 13,0 mm

N° 9 10 12 14 15

9 11 12 14 15

25 25 25 10 10

10605103

313,854

UNF 1/4 - 1/2

1/4 5/16 3/8 7/16 1/2

x x x x x

28 24 24 20 20

6,7 mm 8,3 mm 9,8 mm 11,5 mm 13,0 mm

N° 9 11 13 14 15

9 11 13 14 15

25 25 25 10 10

10605104

313,854

INSERTI FILETTATI IN ACCIAIO INOX PER IL RIPRISTINO DELLE FILETTATURE DANNEGGIATE Wire-thread insert in stainless steel

10606

K-COIL DIN 8140 - ISO 2/6H

Acciaio inox austenitico 18/8 (A2 - AISI304) / Austenitic stainless steel

1xd

Filetto Thread M

2 x 0,4 2,2 x 0,45 2,5 x 0,45 3 x 0,5 3,5 x 0,6 4 x 0,7 5 x 0,8 6 x 1 7 x 1 8 x 1,25 8 x 1 9 x 1,25 10 x 1,5 10 x 1,25 10 x 1 11 x 1,5 12 x 1,75 12 x 1,5 12 x 1,25 12 x 1 14 x 2 14 x 1,5 14 x 1,25 14 x 1 16 x 2 16 x 1,5 18 x 2,5 18 x 2 18 x 1,5 20 x 2,5 20 x 2 20 x 1,5 22 x 2,5 22 x 2 22 x 1,5 24 x 3 24 x 2 24 x 1,5 26 x 1,5 27 x 3 27 x 2 27 x 1,5 28 x 1,5 30 x 3,5 30 x 2 30 x 1,5 33 x 3,5 33 x 2 36 x 4 36 x 3 36 x 2 36 x 1,5

1,5 x d

€

pcs

cod.

cad/each

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 25 25 25 25 25 25 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5

10606102x04 106061022x045 106061025x045 10606103x05 106061035x06 10606104x07 10606105x08 10606106x1 10606107x1 10606108x125 10606108x1 10606109x125 10606110x15 10606110x125 10606110x1 10606111x15 10606112x175 10606112x15 10606112x125 10606112x1 10606114x2 10606114x15 10606114x125 10606114x1 10606116x2 10606116x15 10606118x25 10606118x2 10606118x15 10606120x25 10606120x2 10606120x15 10606122x25 10606122x2 10606122x15 10606124x3 10606124x2 10606124x15 -

1,291 1,291 1,291 0,494 0,494 0,412 0,392 0,392 0,417 0,455 0,455 0,653 0,600 0,600 0,600 0,991 0,848 0,848 0,848 0,848 1,252 1,252 1,252 1,252 1,436 1,436 2,087 2,087 2,087 2,738 2,738 2,738 3,128 3,128 3,128 3,650 3,650 3,650

cod.

2xd

€ cad/each

1060602x04 1,538 10606022x045 1,538 10606025x045 0,522 1060603x05 0,541 10606035x06 1,538 1060604x07 0,500 1060605x08 0,353 1060606x1 0,353 1060607x1 0,561 1060608x125 0,417 1060608x1 0,447 1060609x125 0,756 1060610x15 0,627 1060610x125 0,627 1060610x1 0,627 1060611x15 1,056 1060612x175 0,860 1060612x15 0,860 1060612x125 0,860 1060612x1 0,860 1060614x2 1,082 1060614x15 1,082 1060614x125 1,082 1060614x1 1,082 1060616x2 1,225 1060616x15 1,225 1060618x25 1,956 1060618x2 1,956 1,956 1060618x15 1060620x25 2,477 1060620x2 2,477 1060620x15 2,477 1060622x25 3,261 1060622x2 3,261 1060622x15 3,261 1060624x3 4,198 1060624x2 4,198 1060624x15 4,198 1060626x15 6,670 1060627x3 6,670 1060627x2 6,670 1060627x15 6,670 1060628x15 7,530 1060630x35 8,777 1060630x2 8,777 1060630x15 8,777 1060633x35 10,498 1060633x2 10,498 1060636x4 9,638 1060636x3 9,638 1060636x2 9,638 1060636x15 9,638

2,5 x d

€

3xd

€

cod.

cad/each

cod.

cad/each

cod.

cad/each

10606202x04 106062022x045 106062025x045 10606203x05 106062035x06 10606204x07 10606205x08 10606206x1 10606207x1 10606208x125 10606208x1 10606209x125 10606210x15 10606210x125 10606210x1 10606211x15 10606212x175 10606212x15 10606212x125 10606212x1 10606214x2 10606214x15 10606214x125 10606214x1 10606216x2 10606216x15 10606218x25 10606218x2 10606218x15 10606220x25 10606220x2 10606220x15 10606222x25 10606222x2 10606222x15 10606224x3 10606224x2 10606224x15 -

1,956 1,956 0,883 0,564 0,564 0,447 0,495 0,572 0,691 0,744 0,691 0,939 0,795 0,795 0,795 1,264 1,082 1,082 1,082 1,082 1,409 1,409 1,409 1,409 1,852 1,852 3,300 3,300 3,300 4,199 4,199 4,199 4,706 4,706 4,706 5,488 5,488 5,488

106062502X04 1060625022X04 1060625025X04 106062503X05 1060625035X06 106062504X07 106062505X08 106062506X1 106062507X1 106062508X125 106062508X1 106062509X125 106062510X15 106062510X125 106062510X1 106062512X175 106062512X15 106062512X125 106062512X1 106062514X2 106062514X15 106062514X125 106062514X1 106062516X2 106062516X15 106062518X25 106062518X2 106062518X15 106062520X25 106062520X2 106062520X15 106062522X25 106062522X2 106062522X15 106062524X3 106062524X2 106062524X15 -

2,087 2,087 0,914 0,730 0,914 0,664 0,572 0,588 0,848 0,795 0,795 1,500 0,939 0,939 0,939 1,147 1,147 1,147 1,147 1,566 1,566 1,566 1,566 2,280 2,280 3,650 3,650 3,650 5,019 5,019 5,019 5,646 5,646 5,646 6,584 6,584 6,584

10606302x04 106063022x045 106063025x045 10606303x05 106063035x06 10606304x07 10606305x08 10606306x1 10606307x1 10606308x125 10606308x1 10606309x125 10606310x15 10606310x125 10606310x1 10606312x175 10606312x15 10606312x125 10606312x1 10606314x2 10606314x15 10606314x125 10606314x1 10606316x2 10606316x15 10606318x25 10606318x2 10606318x15 10606320x25 10606320x2 10606320x15 10606322x25 10606322x2 10606322x15 10606324x3 10606324x2 10606324x15 -

2,764 2,764 1,174 0,756 1,043 0,795 0,679 0,744 1,214 1,108 0,939 1,786 1,214 1,214 1,214 1,721 1,721 1,721 1,721 2,491 2,280 2,280 2,280 2,738 2,738 4,420 4,420 4,420 5,619 5,619 5,619 6,023 6,023 6,023 6,779 6,779 6,779

Nota: la misura è riferita all’inserto posizionato nella sua sede

1xd

1,5xd

Note: the coil length refers to the tool mounted inside its site

401

INSERTI FILETTATI AUTOBLOCCANTI IN ACCIAIO INOX PER IL RIPRISTINO DELLE FILETTATURE DANNEGGIATE

Stainless steel wire thread inserts, screw self-locking to renew damaged threads

10625

DIN 8140 - ISO 2/6H Acciaio inox austenitico 18/8 (A2 - AISI304) / Austenitic stainless steel

1xd

Filetto Thread M

3 x 0,5 4 x 0,7 5 x 0,8 6 x 1 8 x 1,25 10 x 1,5 12 x 1,75 14 x 2 16 x 2

AUTOBLOCCANTI - M 1,5 x d

€

2xd

€

pcs

cod.

cad/each

cod.

cad/each

cod.

cad/each

100 100 100 100 100 100 100 50 50

10625103x05 10625104x07 10625105x08 10625106x1 10625108x125 10625110x15 10625112x175 10625114x2 10625116x2

0,561 0,561 0,627 0,691 0,718 0,925 1,343 1,903 2,569

1062503x05 1062504x07 1062505x08 1062506x1 1062508x125 1062510x15 1062512x175 1062514x2 1062516x2

0,588 0,588 0,653 0,756 0,821 0,991 1,538 2,165 2,699

10625203x05 10625204x07 10625205x08 10625206x1 10625208x125 10625210x15 10625212x175 10625214x2 10625216x2

0,627 0,627 0,718 0,821 0,991 1,147 1,746 2,268 3,324

onsi li d uso

Si consiglia l’utilizzo di inserti autobloccanti nel caso di sollecitazioni cicliche del filetto o della necessità di una particolare resistenza agli impatti. Si consiglia inoltre l’uso con viti nichelate o ben lubrificate. L’inserto autobloccante è dotato di alcune spire poligonali inserite tra le spire circolari per tutta la sua lunghezza: tali spire poligonali esercitano una pressione radiale maggiore sulla vite inserita nell’inserto funzionando da bloccaggio. Rimuovendo la vite, le spire poligonali tornano nella loro forma originale garantendo un ottimo livello di pressione radiale per una serie di avvitature/svitature successive.

Use tips

Screw locking inserts are of particular value in applications subject to the effects of cyclic vibration or impact. The prevailing locking torque they assure is achieved by the action of one or more polygonal grip coils positioned within the insert’s length, which exert radial pressure on the male thread. As the male thread passes through these grip coils, the locking flats are displaced thus exerting radial pressure or prevailing torque on the male thread. When removing the male thread, the locking coils relax to their original form permitting repeated assembly while retaining a measurable level of prevailing torque. Please use only close fit plated or lubricated bolts or screws with the screw locking inserts.

402

INSERTI FILETTATI IN ACCIAIO INOX PER IL RIPRISTINO DELLE FILETTATURE DANNEGGIATE Wire-thread insert in stainless steel

10607

K-COIL

UNC

DIN 8140 - ISO 2/6H Acciaio inox austenitico 18/8 / A

/ 1,5 d

10608

K-COIL

pcs.

cod.

cad/each

No.

8 x 32 10 x 24 12 x 24

100 100 100

10607N08 10607N10 10607N12

0,600 0,600 0,600

UNC

1/4 x 20 5/16 x 18 3/8 x 16 7/16 x 14 1/2 x 13 9/16 x 12 5/8 x 11 3/4 x 10 7/8 x 9 1” x 8 1.1/8 x 7 1.1/4 x 7 1.1/2 x 6

100 100 100 100 100 50 50 25 10 10 5 5 5

106071/4 106075/16 106073/8 106077/16 106071/2 106079/16 106075/8 106073/4 106077/8 106071 106071.1/8 106071.1/4 106071.1/2

0,860 0,860 1,108 1,475 1,475 5,176 5,176 6,114 8,957 8,957 14,497 15,919 20,470

UNF

DIN 8140 - ISO 2/6H Acciaio inox austenitico 18/8 / A

/ 1,5 d

10609

K-COIL

€

pcs.

cod.

cad/each

No.

8 x 36 10 x 32

100 100

10608N08 10608N10

1,369 0,860

UNF

1/4 x 28 5/16 x 24 3/8 x 24 7/16 x 20 1/2 x 20 9/16 x 18 5/8 x 18 3/4 x 16 7/8 x 14 1” x 12 1.1/8 x 12 1.1/4 x 12 1.1/2 x 12

100 100 100 100 100 50 50 25 10 10 5 5 5

106081/4 106085/16 106083/8 106087/16 106081/2 106089/16 106085/8 106083/4 106087/8 106081 106081.1/8 106081.1/4 106081.1/2

0,860 0,860 1,108 1,475 1,475 5,176 5,176 6,114 8,957 8,957 14,497 15,919 20,470

BSW

DIN 8140 - ISO 2/6H Acciaio inox austenitico 18/8 / A

/ 1,5 d

€

pcs.

cod.

cad/each

1/8 x 40 3/16 x 24 1/4 x 20 5/16 x 18 3/8 x 16 7/16 x 14 1/2 x 12 9/16 x 12 5/8 x 11 3/4 x 10 7/8 x 9 1” x 8

100 100 100 100 100 100 100 50 50 25 10 10

106091/8 106093/16 106091/4 106095/16 106093/8 106097/16 106091/2 106099/16 106095/8 106093/4 106097/8 106091

1,813 1,813 0,744 0,914 1,512 1,878 1,878 5,372 5,372 6,402 8,957 10,236

403

INSERTI FILETTATI IN ACCIAIO INOX PER IL RIPRISTINO DELLE FILETTATURE DANNEGGIATE Wire-thread insert in stainless steel

10610

K-COIL

BSF

DIN 8140 - ISO 2/6H Acciaio inox austenitico 18/8 / A

/ 1,5 d

10604

K-COIL

pcs.

cod.

cad/each

3/16 x 32 1/4 x 26 5/16 x 22 3/8 x 20 7/16 x 18 1/2 x 16 9/16 x 16 5/8 x 14 3/4 x 12 7/8 x 11 1” x 10

100 100 100 100 100 100 50 50 25 10 10

106103/16 106101/4 106105/16 106103/8 106107/16 106101/2 106109/16 106105/8 106103/4 106107/8 106101

1,813 1,813 1,813 1,813 1,878 1,878 5,372 5,372 6,402 8,957 10,236

BSP

DIN 8140 - ISO 2/6H Acciaio inox austenitico 18/8 / A

/ 1,5 d

404

€

pcs.

cod.

cad/each

1/8 x 28 1/4 x 19 3/8 x 19 1/2 x 14 5/8 x 14 3/4 x 14 7/8 x 14 1” x 11

50 50 50 50 5 5 5 5

106041/8 106041/4 106043/8 106041/2 106045/8 106043/4 106047/8 106041

1,249 1,867 2,194 2,813 7,022 7,022 21,548 21,548

MASCHI STI PER L’INSERIMENTO DI INSERTI FILETTATI K-COIL ISO 2 STI taps for wire thread inserts ISO 2

10612

HSS-G

10612

FORM D ISO 1/4H

HSS-G

ISO 1/4H

€

cod.

cad/each

2 x 0,4 2,5 x 0,45 3 x 0,5 3,5 x 0,6 4 x 0,7 5 x 0,8 6 x 1 7 x 1 8 x 1,25 8 x 1 9 x 1,25 10 x 1,5 10 x 1,25 10 x 1 11 x 1,5 12 x 1,75 12 x 1,5 12 x 1,25 12 x 1 14 x 2 14 x 1,5 14 x 1,25 14 x 1 16 x 2 16 x 1,5 18 x 2,5 18 x 2 18 x 1,5 20 x 2,5 20 x 2 20 x 1,5 22 x 2,5 22 x 2 22 x 1,5 24 x 3 24 x 2 24 x 1,5

1061202X04 10612025X045 1061203X05 10612035X06 1061204X07 1061205X08 1061206X1 1061207X1 1061208X125 1061208X1 1061209X125 1061210X15 1061210X125 1061210X1 1061211X15 1061212X175 1061212X15 1061212X125 1061212X1 1061214X2 1061214X15 1061214X125 1061214X1 1061216X2 1061216X15 1061218X25 1061218X2 1061218X15 1061220X25 1061220X2 1061220X15 1061222X25 1061222X2 1061222X15 1061224X3 1061224X2 1061224X15

18,763 18,763 14,420 14,420 14,420 14,420 14,420 17,836 17,836 17,836 21,982 21,982 21,982 21,982 24,695 30,197 30,197 30,197 30,197 34,304 34,304 34,304 34,304 41,161 41,161 52,153 52,153 52,153 57,655 57,655 57,655 65,895 65,895 65,895 83,717 83,717 83,717

2 pcs set

€

cod.

cad/each

26 x 1,5 27 x 3 27 x 2 27 x 1,5 28 x 1,5 30 x 3,5 30 x 2 30 x 1,5 33 x 3,5 33 x 2 36 x 4 36 x 3 36 x 2 36 x 1,5

1061226X15 1061227X3 1061227X2 1061227X15 1061228X15 1061230X35 1061230X2 1061230X15 1061233X35 1061233X2 1061236X4 1061236X3 1061236X2 1061236X15

331,680 331,680 331,680 331,680 374,549 374,549 374,549 374,549 374,549 374,549 415,164 415,164 415,164 415,164

MASCHIO COMBI PER L’INSERIMENTO DI INSERTI FILETTATI ISO 2 SPECIALE PER CANDELE Spark plug taps with pilot nose for wire thread insert ISO 2

10620

HSS-G

ISO 1/4H M

€

cod.

cad/each

6 x 1 8 x 1,25 10 x 1,5 10 x 1,25 10 x 1 12 x 1,25 14 x 1,25 18 x 1,5

1062006X1 1062008X125 1062010X15 1062010X125 1062010X1 1062012X125 1062014X125 1062018X15

28,671 28,671 36,220 49,545 49,545 52,126 60,459 86,522

405

MASCHI STI PER L’INSERIMENTO DI INSERTI FILETTATI K-COIL ISO 2 STI taps for wire thread inserts ISO 2

10613

HSS-G

10615

FORM D

HSS-G

FORM D

UNC €

cod.

No.

8 x 32 10 x 24 12 x 24

10613NR08 10613NR10 10613NR12

25,021 25,021 25,021

UNC

1/4 x 20 5/16 x 18 3/8 x 16 7/16 x 14 1/2 x 13 9/16 x 12 5/8 x 11 3/4 x 10 7/8 x 9 1” x 8

106131/4 106135/16 106133/8 106137/16 106131/2 106139/16 106135/8 106133/4 106137/8 106131

16,494 17,916 18,763 25,021 28,436 47,186 58,281 70,797 82,441 107,839

10614

HSS-G

BSW Ø

cad/each

x 40 x 24 x 20 x 18 x 16 x 14 x 12 x 12 x 11 x 10 x 9 x 8

106151/8 106153/16 106151/4 106155/16 106153/8 106157/16 106151/2 106159/16 106155/8 106153/4 106157/8 106151

16,494 16,494 16,494 17,916 18,763 25,021 28,436 47,186 58,281 70,797 82,441 107,839

HSS-G

FORM D

BSW 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1”

10616

FORM D UNF cod.

cad/each

No.

8 x 36 10 x 32

10614NR08 10614NR10

25,021 25,021

UNF

1/4 x 28 5/16 x 24 3/8 x 24 7/16 x 20 1/2 x 20 9/16 x 18 5/8 x 18 3/4 x 16 7/8 x 14 1” x 12 1” x 14

106141/4 106145/16 106143/8 106147/16 106141/2 106149/16 106145/8 106143/4 106147/8 10614112 10614114

16,494 17,916 18,763 25,021 29,570 47,186 58,281 70,797 82,441 103,406 103,406

10617

HSS-G

BSF

€

Ø BSF 3/16 x 32 1/4 x 26 5/16 x 22 3/8 x 20 7/16 x 18 1/2 x 16 9/16 x 16 5/8 x 14 3/4 x 12 7/8 x 11 1” x 10

FORM D BSP

BSP

2 pcs set

406

€

cod.

cad/each

€

cod.

cad/each

1/8 x 28 1/4 x 19 3/8 x 19 1/2 x 14 5/8 x 14 3/4 x 14 7/8 x 14 1” x 11

106171/8 106171/4 106173/8 106171/2 106175/8 106173/4 106177/8 106171

54,760 73,013 91,085 105,780 146,029 219,042 275,994 340,702

€

cod.

cad/each

106163/16 106161/4 106165/16 106163/8 106167/16 106161/2 106169/16 106165/8 106163/4 106167/8 106161

17,288 16,494 17,916 18,763 25,021 28,436 49,467 61,071 74,201 86,391 107,839

ACCESSORI PER L UTILIZZO DEGLI INSERTI FILETTATI K-COIL Inserting tools for K-coil

10611

PUNTA ELICOIDALE PER PREFORI FIL DANNEGGIATE Twist drill for damaged threads Ø

2,1 2,6 3,2 3,7 4,2 5,2 6,3 7,3 8,3 9,3 10,3 10,4 11,4 12,3 12,4

24 30 36 39 43 52 63 69 75 81 87 87 94 101 101

49 57 65 70 75 86 101 109 117 125 133 133 133 133 133

Per filetto For thread

cod.

cad/each

2 x 0,4 2,5 x 0,45 3 x 0,5 3,5 x 0,6 4 x 0,7 5 x 0,8 6 x 1 7 x 1 8 x 1,25 - 8x1 9 x 1,25 10 x 1,25 - 10x1 10 x 1,5 11 x 1,5 12 x 1,25 - 12x1 12 x 1,75 - 12x1,5

106180210 106180260 106180320 106180370 106180420 106180520 106180630 106180730 106180830 106180930 106181030 106181040 106181140 106181230 106181240

1,225 1,409 1,512 1,655 2,047 2,686 3,728 4,772 6,584 7,734 10,469 23,580 25,656 25,656 35,203

UTENSILE PER LA ROTTURA DEL PERNO DI TRASCINAMENTO K-COIL Tang break tool

Ø M

10622

€

2 x 0,4 2,5 x 0,45 3 x 0,5 3,5 x 0,6 4 x 0,7 5 x 0,8 6 x 1 7 x 1 - 8x1,25 - 8x1 9 x 1,25 10 x 1,5 - 10x1,25 - 10x1 11 x 1,5 12 x 1,75 - 12x1,5 - 12x1,25 - 12x1

€

N°

cod.

cad/each

2 3 4 5 6 8 9 11 12 13 14 15

1061102 1061103 1061104 1061105 1061106 1061108 1061109 1061111 1061112 1061113 1061114 1061115

4,434 4,434 4,434 4,434 4,434 4,434 4,434 4,981 4,981 4,981 6,011 6,011

cod.

cad/each

1062202

40,940

1062203

49,806

ESTRATTORE K-COIL Extracting tool

N° 2

3 ÷ 10 3/16 ÷ 3/8 11 ÷ 24 3/8 ÷ 1"

€

407

ACCESSORI TOOLS

10618

ACCESSORI PER L UTILIZZO DEGLI INSERTI FILETTATI K-COIL Inserting tools for K-coil

10621

UTENSILE MANUALE PER INSERIRE I K-COIL Inserting tool for K-coil

Ø M

10628

2 x 0,4 2,5 x 0,45 3 x 0,5 3,5 x 0,6 4 x 0,7 5 x 0,8 6 x 1 7 x 1 8 x 1,25 - 8x1 9 x 1,25 10 x 1,5 - 10x1,25 - 10x1 11 x 1,5 12 x 1,75 - 12x1,5 - 12x1,25 - 12x1 14 x 2 - 14x1,5 14 x 1,25 - 14x1 16 x 2 - 16x1,5 18 x 2,5 - 18x2 - 18x1,5 20 x 2,5 - 20x2 - 20x1,5 22 x 2,5 - 22x2 - 22x1,5 24 x 2,5 - 24x2 - 24x1,5

INSERITORE CON ATTACCO 1/4 HE

M3 M4 M5 M6 M8 M 10 M 12

ACCESSORI TOOLS

cod.

cad/each

2 3 4 5 6 8 9 10 11 12 13 14 15 16 17 18 20 21 22 23

1062102 1062103 1062104 1062105 1062106 1062108 1062109 1062110 1062111 1062112 1062113 1062114 1062115 1062116 1062117 1062118 1062120 1062121 1062122 1062123

13,572 13,572 12,961 12,961 12,961 14,577 14,577 16,636 16,636 17,916 17,916 20,979 20,979 25,072 25,072 30,704 30,704 30,704 38,659 38,659

FORM E

Inserting tool with 1/4" HEX FORM E hex shank Per filetto For thread

408

€

N°

€

cod.

cad/each

1062803X05 1062804X07 1062805X08 1062806X1 1062808X125 1062810X15 1062812X175

24,121 24,121 24,121 24,121 29,859 32,856 38,854

ACCESSORI PER L UTILIZZO DEGLI INSERTI FILETTATI K-COIL Inserting tools for K-coil

INSERITORE CON ATTACCO ESAGONALE DA 1/2 Inserting tool with 1/2” hexagonal drive

€

cod.

cad/each

26 x 1,5 27 x 3 27 x 2 27 x 1,5 28 x 1,5 30 x 3,5 30 x 2 30 x 1,5 33 x 3,5 33 x 2 36 x 4 36 x 3 36 x 2 36 x 1,5

1062326X15 1062327X3 1062327X2 1062327X15 1062328X15 1062330X35 1062330X2 1062330X15 1062333X35 1062333X2 1062336X4 1062336X3 1062336X2 1062336X15

48,476 48,476 48,476 48,476 48,476 58,164 58,164 58,164 67,551 67,551 67,551 67,551 67,551 67,551

cod.

cad/each

*1/8 x 28 *1/4 x 19 *3/8 x 19 *1/2 x 14 5/8 x 14 3/4 x 14 7/8 x 14 1” x 11

10623G1/8 10623G1/4 10623G3/8 10623G1/2 10623G5/8 10623G3/4 10623G7/8 10623G1

29,089 29,089 33,783 38,776 48,476 48,476 67,551 67,551

€

Attacco da 1/4 1/4” hexagonal drive

ACCESSORI TOOLS

10623

409

410

ALESATORI, FRESE FRONTALI E UTENSILI SALDOBRASATI REAMERS, END MILLS AND BRAZED TOOLS

411

ALESATORI A MACCHINA HSS-CO A CODOLO CILINDRICO HSS-CO machine reamers

29020

HSS-CO 5%

DIN 212/2B

Confezione Packaging

10°

45°

Ø g6

d h9

l mm

L mm

pcs.

cod.

cad/each

€

3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

3,0 4,0 5,0 6,0 7,0 8,0 9,0 10,0 10,0 10,0 10,0 12,5 12,5 12,5 14,0 14,0 16,0 16,0

15 19 23 26 30 32 36 38 41 44 44 47 50 52 54 56 58 60

61 75 86 93 109 117 125 133 142 151 151 160 162 170 175 182 189 195

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 10 10

290200300 290200400 290200500 290200600 290200700 290200800 290200900 290201000 290201100 290201200 290201300 290201400 290201500 290201600 290201700 290201800 290201900 290202000

31,215 31,123 33,268 33,858 40,067 41,399 52,340 48,866 70,008 74,814 83,463 86,198 89,008 93,296 117,839 120,573 142,013 136,026

Per operazioni di finitura di fori passanti in tolleranza H7 di materiali ferrosi e non ferrosi.

Applicazioni Applications

Acciaio Steel

Metalli Metals

Olio Oil

412

Suitable for finishing operations, insidethrough holes with H7 tolerance.

ALESATORI A MACCHINA HSS-CO A CODOLO CILINDRICO HSS-CO machine reamers

29021

HSS-CO 5%

DIN 212/2C

Confezione 45°

Packaging

Per centri a controllo numerico CNC For CNC numerical control centers

Ø g6

d h9

l mm

L mm

pcs.

cod.

cad/each

€

3 4 5 6 7 8 9 10 11 12 13 14 16 18 20

3,0 4,0 5,0 6,0 7,0 8,0 9,0 10,0 10,0 10,0 10,0 12,5 12,5 14,0 16,0

15 19 23 26 30 32 36 38 41 44 44 47 52 56 60

61 75 86 93 109 117 125 133 142 151 151 160 170 182 195

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

6 6 6 6 6 6 6 6 8 8 8 8 8 8 10

290210300 290210400 290210500 290210600 290210700 290210800 290210900 290211000 290211100 290211200 290211300 290211400 290211600 290211800 290212000

36,798 50,381 52,097 54,525 60,885 64,959 67,187 78,038 103,263 116,412 103,143 128,796 151,785 209,456 217,531

Applicazioni Applications

Acciaio Steel

Metalli Metals

Per operazioni di finitura di fori passanti in tolleranza H7 di materiali ferrosi e non ferrosi.

Olio Oil

Suitable for finishing operations, insidethrough holes with H7 tolerance.

Consigli d’uso Per evitare un’usura precoce dell’utensile, è buona norma fare ruotare l’alesatore sempre e solo nel verso corretto di rotazione e lavorare con uno spessore corretto di sovrametallo da asportare. Di seguito si riporta lo spessore di sovrametallo consigliato: Use tips Please always rotate the reamer according to the correct sense of rotation to prevent early tool wear. Please refer to the previous table to learn the right removable stock thickness to be used.

Diametro foro (mm) Hole diameter (mm) ≤

Spessore consigliato di sovrametallo (mm) Removable stock thichness (mm) 0,1

≤

0,2 ≤

0,3

≤

0,4

Lo spessore di sovrametallo non deve essere troppo limitato, perch in tal modo l’alesatore comprime il materiale invece di tagliarlo. D’altro canto lo spessore non deve essere troppo elevato, perch l’utensile rischia di incollarsi e/o il foro generato risulta sottodimensionato.

If the removable stock thickness is too little, the reamer compresses the work-piece material instead of cutting it on the other hand, if the removable stock thickness is too high, the tool tries to stick and/or the hole you produce is too little.

Fori sottodimensionati si ottengono anche con velocità e avanzamenti troppo bassi o con apporti troppo limitati di lubrorefrigerante, mentre fori sovradimensionati si ottengono con parametri di taglio troppo elevati. Parametri di lavoro scorretti generano tra l’altro anche fori con una cattiva finitura.

You’ll produce little holes also with low cutting parameters (low cutting speed, low feed, low lubricant content), whereas you’ll drill bigger holes than expected if you use high cutting parameters. Please use the recommended cutting parameters to avoid any bad finishing.

413

ALESATORI A MACCHINA A CODOLO CONICO MORSE

Morse taper shank machine reamers

29026

HSS-CO 5% Confezione Ø Packaging g6

10°

5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

45°

10°

DIN 208 B M.K.

l L mm mm

pcs.

23 26 31 33 36 38 41 44 44 47 50 52 54 56 58 60 62

6 6 6 6 6 6 8 8 8 8 8 8 8 8 10 10 10

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2

133 138 150 156 162 168 175 182 182 189 204 210 214 219 223 228 232

Ø g6

M.K.

cad/each

290260500 47,858 290260600 46,470 290260700 47,170 290260800 47,858 290260900 48,558 290261000 49,245 290261100 52,711 290261200 54,798 290261300 56,875 290261400 63,805 290261500 72,135 290261600 78,376 290261700 79,764 290261800 86,007 290261900 90,859 290262000 101,267 290262100 103,344

22 23 24 25 26 27 28 30 31 32 34 35 36 38 40 45 50

2 2 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4

cod.

€

l L mm mm

pcs.

cod.

cad/each

64 66 68 68 70 71 71 73 75 77 78 78 79 81 81 83 86

10 10 10 10 10 10 10 10 12 12 12 12 12 12 12 12 12

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

290262200 290262300 290262400 290262500 290262600 290262700 290262800 290263000 290263100 290263200 290263400 290263500 290263600 290263800 290264000 290264500 290265000

110,284 117,915 142,882 142,882 160,906 162,295 177,555 196,278 210,152 245,524 273,967 283,674 300,321 327,366 361,351 439,441 497,956

237 241 268 268 273 277 277 281 285 317 321 321 325 329 329 336 344

€

Per operazioni di finitura di fori passanti in tolleranza H7 di materiali ferrosi e non ferrosi. Suitable for finishing operations, inside through holes with H7 tolerance.

29039

HSS Confezione Packaging

1:10

25°

DIN 311 Ø g6

M.K.

10 11 12 13 14 15 16 17 18 19 20 21

1 1 2 2 2 2 2 3 3 3 3 3

l L mm mm

pcs.

cod.

Ø g6

M.K.

cad/each

95 100 105 105 115 125 135 135 145 145 155 155

4 4 5 5 5 5 5 5 5 5 5 5

1 1 1 1 1 1 1 1 1 1 1 1

290391000 290391100 290391200 290391300 290391400 290391500 290391600 290391700 290391800 290391900 290392000 290392100

62,820 68,345 80,077 84,237 92,490 102,857 108,314 122,161 134,029 151,217 164,381 169,701

22 23 24 25 26 27 28 30 31 32 34 36

3 3 3 3 3 3 3 3 3 4 4 4

171 176 199 199 209 209 219 229 251 261 261 271

€

l L mm mm

pcs.

cod.

cad/each

165 165 180 180 180 195 195 195 210 210 220 220

5 5 5 5 5 5 5 5 5 5 5 5

1 1 1 1 1 1 1 1 1 1 1 1

290392200 290392300 290392400 290392500 290392600 290392700 290392800 290393000 290393100 290393200 290393400 290393600

186,208 194,120 215,879 228,156 230,680 258,372 270,991 299,365 333,400 363,617 412,181 459,790

271 281 281 296 296 311 311 311 326 354 364 364

€

Per alesare fori disallineati che devono essere rivettati o imbullonati insieme Suitable for finishing operations, throught misaligned holes

414

ALESATORI A MANICOTTO IN HSS CON TAGLIENTI ELICOIDALI E FORO CONICO 1:30 HSS shell reamers with taper bore 1:30

29040

HSS

DIN 219 B Confezione Packaging

10°

1:30

Applicazioni Applications

Acciaio Steel

Ø g6

Ø mm foro / hole

l mm

L mm

pcs.

cod.

cad/each

€

30 32 34 35 36 38 40 42 45 46 48 50 52 55 58 60

13 16 16 16 19 19 19 19 22 22 22 22 27 27 27 27

32 36 36 36 40 40 40 40 45 45 45 45 50 50 50 50

45 50 50 50 56 56 56 56 63 63 63 63 71 71 71 71

10 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

290403000 290403200 290403400 290403500 290403600 290403800 290404000 290404200 290404500 290404600 290404800 290405000 290405200 290405500 290405800 290406000

119,291 133,861 148,424 149,122 169,924 181,020 190,038 205,997 242,060 256,630 271,880 292,112 326,390 362,053 381,939 401,130

Metalli Metals

Olio Oil

Per operazioni di finitura di fori passanti in tolleranza H7 di materiali ferrosi e non ferrosi. Da utilizzare con apposito mandrino porta alesatore. H7

Suitable for finishing operations, inside through holes with H7 tolerance. se with proper drill chuck.

MANDRINO PORTA ALESATORE A MANICOTTO CON ESTRATTORE

Drill chuck for shell reamers with ejecting tool

29041 1:30

HSS

DIN 217 Confezione Packaging

M.K. 3 3 4 4 5

Ø foro mm Ø hole mm

L mm

cod.

€

13 16 19 22 27

250 261 298 312 359

290410313 290410316 290410419 290410422 290410527

cad/each

300,649 323,761 394,402 444,815 641,868

Estrattore / Ejecting ring Trascinatore / Shell reamer holder 1:30

Cono Morse /MK Ø

415

ALESATORI A MANO IN HSS A CODOLO CILINDRICO HSS hand reamers

29001

HSS

DIN 206 B Confezione Packaging

7°

45° 7°

Ø g6

d e9

q mm

l mm

L mm

pcs.

cod.

cad/each

4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 32 34 35 36 38 40

3,0 3,8 4,9 5,5 6,2 7,0 8,0 9,0 9,0 10,0 11,0 12,0 12,0 13,0 14,5 14,5 16,0 16,0 18,0 18,0 18,0 20,0 20,0 22,0 22,0 24,0 24,0 26,0 29,0 29,0 29,0 32,0

38 44 47 54 58 62 66 71 76 76 81 81 87 87 93 93 100 100 107 107 115 115 115 124 124 124 133 142 142 142 152 152

76 87 93 107 115 124 133 142 152 152 163 163 175 175 188 188 201 201 215 215 231 231 231 247 247 247 265 284 284 284 305 305

6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 12 12 12 12 12 12

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

290010400 290010500 290010600 290010700 290010800 290010900 290011000 290011100 290011200 290011300 290011400 290011500 290011600 290011700 290011800 290011900 290012000 290012100 290012200 290012300 290012400 290012500 290012600 290012700 290012800 290013000 290013200 290013400 290013500 290013600 290013800 290014000

26,743 30,644 33,059 37,097 40,318 44,355 49,186 66,118 72,573 79,024 88,697 96,761 108,864 110,473 112,083 117,732 138,691 139,495 154,816 163,684 191,108 191,914 213,687 229,815 254,811 279,807 328,188 379,790 400,758 416,081 483,809 525,737

Applicazioni

Per operazioni di calibratura, lavori di manutenzione o riparazione di fori passanti in tolleranza H7. Suitable for gauging operations, maintenance and recovery of through holes with H7 tolerance.

Applications

Acciaio Steel

Metalli Metals

Olio Oil

Sovrametallo consigliato / Recommended removable stock Diametro foro (mm) Hole diameter (mm) ≤

416

Spessore consigliato di sovrametallo (mm) Removable stock thichness (mm) 0,2

≤ Ø = 40

€

0,3 0,4

ALESATORI A MANO IN HSS A CODOLO CILINDRICO HSS hand reamers

29006

HSS

Piccola espansione 1/100 del diametro nominale

DIN 859/B

Adjustable hand reamer 1/100 nominal diameter

Confezione Packaging

7°

Ø l

Ø mm

d e9

q mm

l mm

L mm

pcs.

cod.

4 5 6 7 8 9 10 11 12 13 14 15 16 19 20 22 24 25 30 33 38

3,0 3,8 4,9 5,5 6,2 7,0 8,0 9,0 9,0 10,0 11,0 12,0 12,0 14,5 16,0 18,0 18,0 20,0 24,0 26,0 29,0

24 30 33 38 42 46 50 51 56 56 61 61 67 68 75 82 85 85 94 99 111

76 87 93 107 115 124 133 142 152 152 163 163 175 188 201 215 231 231 247 265 305

6 6 6 9 9 9 9 9 9 9 9 9 9 9 9 12 12 12 12 12 12

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

29006001 29006002 29006003 29006004 29006005 29006006 29006007 29006008 29006009 29006010 29006011 29006012 29006013 29006014 29006015 29006016 29006017 29006018 29006019 29006020 29006021

€ cad/each

146,735 148,390 149,727 182,575 180,792 193,588 200,018 238,405 225,798 260,558 267,813 281,374 349,871 370,880 381,891 455,862 501,633 502,017 649,197 1.025,564 1.265,289

q H7

29005

Grande espansione, lame corte

HSS

Expanding hand reamer short type Confezione Packaging

0°

Ø Capacità Ø Range

q mm

l mm

L mm

6,4-7,2 7,2-8 8-9 9-10 10-11 11-12 12-13,5 13,5-15,5 15,5-18 18-21 21-24 24-27,5 27,5-31,5 31,5-37 37-45 45-55 55-65 67-80

3,0 3,4 3,8 4,3 4,9 4,9 6,2 7,0 8,0 9,0 11,0 12,0 14,5 18,0 20,0 26,0 32,0 39,0

32 32 34 34 34 35 41 50 60 65 76 82 86 98 108 118 125 140

110 110 115 115 115 125 135 146 166 178 195 218 245 280 325 370 400 435

z 4 4 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6 8

pcs.

cod.

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

29005001 29005002 29005003 29005004 29005005 29005006 29005007 29005008 29005009 29005010 29005011 29005012 29005013 29005014 29005015 29005016 29005017 29005018

€ cad/each

208,935 211,277 213,618 225,062 234,037 231,500 261,478 285,603 288,009 315,970 389,779 416,050 499,220 682,274 881,652 1.191,447 1.551,881 2.183,596

Per eseguire riparazioni e lavorazioni leggere in fori ciechi e/o passanti in tolleranza H7. H7

Suitable for recovery and light works inside blind and/or through holes with H7 tolerance.

q 417

ALESATORI A MANO IN HSS A CODOLO CILINDRICO, CONICITÀ 1:50, PER FORI DI SPINE CONICHE Taper pin hand reamers, taper 1:50

29010

HSS

DIN 9 B Confezione Packaging

7°

1:50

Ø min

Ø mm

Ø min mm

Ø max mm

q mm

l mm

L mm

pcs.

cod.

cad/each

4 5 6 8 10 12 16 20

3,90 4,90 5,90 7,90 9,90 11,80 15,80 19,80

5,25 6,36 8,00 10,80 13,40 16,00 20,40 24,80

4,00 5,00 6,30 8,00 10,00 11,20 14,00 18,00

68 73 105 145 175 210 230 250

93 100 135 180 215 255 280 310

5 5 6 7 7 7 9 9

1 1 1 1 1 1 1 1

290100400 290100500 290100600 290100800 290101000 290101200 290101600 290102000

48,122 48,885 59,586 91,670 113,061 154,308 236,050 328,481

Per operazioni di alesatura in fori di spine coniche con tolleranza H7. Scaricare ripetutamente i trucioli durante la lavorazione. H7

Ø max

7° d

Applicazioni Applications

Acciaio Steel

Metalli Metals

Olio Oil

418

Suitable for reaming in taper pin holes with H7 tolerance. Please remove the chips while reaming.

€

FRESE FRONTALI A 2 TAGLIENTI IN METALLO DURO INTEGRALE Three flutes carbide end mills

Serie corta Short serie

24150

24152

VHM DIN 6527 K

TiAlN

DIN 6527 K

Ø mm

d L mm mm

l mm

pcs.

cod.

cad/each

Ø mm

d L mm mm

l mm

pcs.

cod.

cad/each

2 3 4 5 6 8 10 12 14 16 18 20

6 6 6 6 6 8 10 12 14 16 18 20

3 4 5 6 7 9 11 12 14 16 18 20

2 2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1 1

241500200 241500300 241500400 241500500 241500600 241500800 241501000 241501200 241501400 241501600 241501800 241502000

31,115 31,918 32,419 33,036 34,364 41,096 63,522 93,093 129,234 148,949 227,803 243,137

2 3 4 5 6 8 10 12 14 16 18 20

6 6 6 6 6 8 10 12 14 16 18 20

3 4 5 6 7 9 11 12 14 16 18 20

2 2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1 1

241520200 241520300 241520400 241520500 241520600 241520800 241521000 241521200 241521400 241521600 241521800 241522000

35,782 36,705 37,282 37,992 39,518 47,261 73,050 107,057 148,619 171,291 261,973 279,607

50 50 54 54 54 58 66 73 75 82 84 92

€

VHM

50 50 54 54 54 58 66 73 75 82 84 92

€

Fresa per cave Slot end mills

Ø 0,5÷1 Ø

Serie extra lunga

Extra long serie

24151

VHM

NORMA KRINO

24153

Krino norm

TiAlN

NORMA KRINO Krino norm

Ø mm

d L mm mm

l mm

pcs.

cod.

cad/each

Ø mm

d L mm mm

l mm

pcs.

cod.

cad/each

3 4 5 6 8 10 12 14 16 18 20

20 25 30 30 40 40 45 45 65 65 65

2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1

241510300 241510400 241510500 241510600 241510800 241511000 241511200 241511400 241511600 241511800 241512000

53,005 58,474 61,267 68,475 115,740 139,875 215,201 273,170 362,481 432,184 488,039

3 4 5 6 8 10 12 14 16 18 20

20 25 30 30 40 40 45 45 65 65 65

2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1

241530300 241530400 241530500 241530600 241530800 241531000 241531200 241531400 241531600 241531800 241532000

71,076 78,424 82,195 86,521 152,413 192,451 299,129 358,656 475,915 536,950 606,342

75 75 75 75 100 100 150 150 150 150 150

€

VHM

75 75 75 75 100 100 150 150 150 150 150

€

Confezione Packaging

Fresa per cave 30° Ø

d l

Applicazioni

Applications

Slot end mills

HA - DIN 6535 Ø 2,5÷3

R < 850 N/mm2 Acciaio Steel

Alu

Alluminio Aluminum Si 3÷12%

Emulsione Lubrificant

Ghisa Cast Iron HB30<200

a secco dry

419

FRESE FRONTALI A 3 TAGLIENTI IN METALLO DURO INTEGRALE Three flutes carbide end mills

Serie lunga Long serie

24161

24163

VHM DIN 6527 L

TiAlN

DIN 6527 L

Ø h10

d L mm mm

l mm

pcs.

cod.

cad/each

Ø h10

d L mm mm

l mm

pcs.

cod.

cad/each

3 4 5 6 8 9 10 12 14 16 18 20

6 6 6 6 8 10 10 12 14 16 18 20

7 8 10 10 16 16 19 22 22 26 26 32

3 3 3 3 3 3 3 3 3 3 3 3

1 1 1 1 1 1 1 1 1 1 1 1

241610300 241610400 241610500 241610600 241610800 241610900 241611000 241611200 241611400 241611600 241611800 241612000

43,262 41,289 41,289 41,289 50,722 72,239 73,722 107,891 140,147 176,041 251,077 276,501

3 4 5 6 8 9 10 12 14 16 18 20

6 6 6 6 8 10 10 12 14 16 18 20

7 8 10 10 16 16 19 22 22 26 26 32

3 3 3 3 3 3 3 3 3 3 3 3

1 1 1 1 1 1 1 1 1 1 1 1

241630300 241630400 241630500 241630600 241630800 241630900 241631000 241631200 241631400 241631600 241631800 241632000

50,616 48,319 48,319 48,319 63,323 91,154 92,048 134,492 174,741 213,993 301,294 336,101

57 57 57 57 63 72 72 83 83 92 92 104

€

VHM

57 57 57 57 63 72 72 83 83 92 92 104

€

Fresa per cave Slot end mills

Ø 1÷2

Serie extra lunga

Extra long serie

24162

VHM

NORMA KRINO

24164

Krino norm

TiAlN

NORMA KRINO Krino norm

Ø h10

d L mm mm

l mm

pcs.

cod.

cad/each

Ø h10

d L mm mm

l mm

pcs.

cod.

cad/each

3 4 5 6 8 10 12 16 20

20 25 30 30 40 40 45 65 65

3 3 3 3 3 3 3 3 3

1 1 1 1 1 1 1 1 1

241620300 241620400 241620500 241620600 241620800 241621000 241621200 241621600 241622000

49,655 54,459 60,065 78,485 100,910 132,944 195,496 364,705 479,702

3 4 5 6 8 10 12 16 20

20 25 30 30 40 40 45 65 65

3 3 3 3 3 3 3 3 3

1 1 1 1 1 1 1 1 1

241640300 241640400 241640500 241640600 241640800 241641000 241641200 241641600 241642000

68,752 75,405 83,169 108,671 139,722 184,077 263,919 492,352 647,599

75 75 75 75 100 100 150 150 150

€

VHM

75 75 75 75 100 100 150 150 150

Confezione

€

Fresa per cave

Packaging

Slot end mills

HA - DIN 6535

30°

Ø 2,5÷3

l L

Applicazioni Applications

R < 850 N/mm2 Acciaio Steel

420

Metalli Metals

Alu

Alluminio Aluminum Si 3÷12%

Emulsione Lubrificant

Ghisa Cast Iron HB30<200

a secco dry

FRESE FRONTALI A 3 TAGLIENTI IN METALLO DURO INTEGRALE RIV TIALN ATTACCO HB-DIN 6535 Four and three flutes carbide end mills TiAlN coated

Minifresa

Mini end mills

24181

VHM

TiAlN

Applicazioni Applications

R < 850 N/mm2 Acciaio Steel

Metalli Metals

NORMA KRINO Carbide

Ø e8

d mm

L mm

l mm

pcs.

cod.

cad/each

0,5 1 1,5 2 2,5 3 3,5 4 4,5 5 6 8 10 12

3 3 3 6 6 6 6 6 6 6 6 8 10 12

38 38 38 38 38 38 38 38 38 38 38 43 50 55

1,5 2 2 4 5 5 6 7 8 8 8 11 13 15

3 3 3 3 3 3 3 3 3 3 3 3 3 3

1 1 1 1 1 1 1 1 1 1 1 1 1 1

241810050 241810100 241810150 241810200 241810250 241810300 241810350 241810400 241810450 241810500 241810600 241810800 241811000 241811200

32,365 29,462 29,462 33,170 35,434 33,170 35,434 34,183 38,948 37,518 37,518 51,869 74,917 90,401 Mini fresa per cave

R > 750 N/mm2 Inox Stainless

INOX

€

Alu

Alluminio Aluminum Si 3÷12%

30° Ø <2mm Ø

Mini slot end mills

30°

HA - DIN 6535 d

HB - DIN 6535

Ø ≥2mm Ø 0,5÷1

l L

Emulsione Lubrificant

Serie lunga Long serie

24184

VHM

TiAlN

DIN 6527 L Carbide

Ø h10

d mm

L mm

l mm

pcs.

cod.

cad/each

€

2 3 4 5 6 8 9 10 12 14 16 18 20

6 6 6 6 6 8 10 10 12 14 16 18 20

57 57 57 57 57 63 72 72 83 83 92 92 104

6 7 8 10 10 16 16 19 22 22 26 26 32

3 3 3 3 3 3 3 3 3 3 3 3 3

1 1 1 1 1 1 1 1 1 1 1 1 1

241840200 241840300 241840400 241840500 241840600 241840800 241840900 241841000 241841200 241841400 241841600 241841800 241842000

56,983 56,983 54,542 54,542 54,542 70,507 97,690 101,072 144,081 185,839 232,255 327,106 364,462

Confezione

Fresa per cave

Packaging

Ø l R < 850 N/mm2

Slot end mills

HB - DIN 6535

30°

Ø 1÷2

L Ø

Applicazioni Applications

Metalli Metals Alu

Alluminio Aluminum Si 3÷12%

Emulsione Lubrificant

Ghisa Cast Iron HB30<200

a secco dry

421

FRESE FRONTALI A 4 TAGLIENTI IN METALLO DURO INTEGRALE Four flutes carbide end mills

Serie lunga Long serie

24165

24167

VHM DIN 6527 K

TiAlN

DIN 6527 K

Ø h10

d L mm mm

l mm

pcs.

cod.

cad/each

Ø h10

d L mm mm

l mm

pcs.

cod.

cad/each

2 3 4 5 6 8 10 12 14 16 18 20

6 6 6 6 6 8 10 12 14 16 18 20

4 5 8 9 10 12 14 16 18 22 24 26

4 4 4 4 4 4 4 4 4 4 4 4

1 1 1 1 1 1 1 1 1 1 1 1

241650200 241650300 241650400 241650500 241650600 241650800 241651000 241651200 241651400 241651600 241651800 241652000

37,447 33,797 30,302 30,302 33,630 42,355 64,605 96,599 124,464 160,493 237,494 252,203

2 3 4 5 6 8 10 12 14 16 18 20

6 6 6 6 6 8 10 12 14 16 18 20

4 5 8 9 10 12 14 16 18 22 24 26

4 4 4 4 4 4 4 4 4 4 4 4

1 1 1 1 1 1 1 1 1 1 1 1

241670200 241670300 241670400 241670500 241670600 241670800 241671000 241671200 241671400 241671600 241671800 241672000

43,097 38,896 36,349 36,349 44,116 63,022 92,434 119,744 159,657 205,874 304,609 323,516

50 50 54 54 54 58 66 73 75 82 84 92

€

VHM

50 50 54 54 54 58 66 73 75 82 84 92

€

Finitura Finishing

Ø 0,5÷1 Ø 0,1÷0,2

Serie lunga Long serie

24166

24168

VHM DIN 6527 L

DIN 6527 L

d L mm mm

l mm

pcs.

cod.

cad/each

Ø h10

d L mm mm

l mm

pcs.

cod.

cad/each

2 3 4 5 6 8 9 10 12 14 16 18 20

6 6 6 6 6 8 10 10 12 14 16 18 20

7 8 11 13 13 19 19 22 26 26 32 32 38

4 4 4 4 4 4 4 4 4 4 4 4 4

1 1 1 1 1 1 1 1 1 1 1 1 1

241660200 241660300 241660400 241660500 241660600 241660800 241660900 241661000 241661200 241661400 241661600 241661800 241662000

49,481 42,060 38,641 38,069 37,977 46,571 83,006 74,003 100,479 143,296 173,755 244,267 268,314

2 3 4 5 6 8 9 10 12 14 16 18 20

6 6 6 6 6 8 10 10 12 14 16 18 20

7 8 11 13 13 19 19 22 26 26 32 32 38

4 4 4 4 4 4 4 4 4 4 4 4 4

1 1 1 1 1 1 1 1 1 1 1 1 1

241680200 241680300 241680400 241680500 241680600 241680800 241680900 241681000 241681200 241681400 241681600 241681800 241682000

56,861 48,902 46,327 45,708 52,519 75,805 105,294 106,742 138,997 172,008 213,893 302,891 340,667

Confezione

57 57 57 57 57 63 72 72 83 83 92 92 104

Ø 1÷2

l L

Ø 0,1÷0,2

Applicazioni Applications

R < 1000 N/mm2

Acciaio Steel

Metalli Metals

Alu

Alluminio Aluminum Si 3÷12%

Emulsione Lubrificant

Ghisa Cast Iron HB30<200

Finishing

R < 850 N/mm2

€

Finitura

HA - DIN 6535

30°

Packaging

422

TiAlN

Ø h10

57 57 57 57 57 63 72 72 83 83 92 92 104

€

VHM

a secco dry

FRESE FRONTALI A 4 TAGLIENTI IN METALLO DURO INTEGRALE Four flutes carbide end mills

Serie lunga Long serie

24183

VHM

TiAlN

DIN 6527 L Carbide

Ø h10

d mm

L mm

l mm

pcs.

cod.

cad/each

€

2 3 4 5 6 8 9 10 12 14 16 18 20

57 57 57 57 57 63 72 72 83 83 92 92 104

7 8 11 13 13 19 19 22 26 26 32 32 38

4 4 4 4 4 4 4 4 4 4 4 4 4

1 1 1 1 1 1 1 1 1 1 1 1 1

241830200 241830300 241830400 241830500 241830600 241830800 241830900 241831000 241831200 241831400 241831600 241831800 241832000

58,241 50,820 49,310 49,310 49,310 62,534 99,434 92,404 128,279 175,196 211,433 307,190 336,711 Finitura

30°

Finishing

HB - DIN 6535 d

Ø 1÷2

Ø 0,1÷0,2

Serie lunga Long serie

24182

VHM

TiAlN

DIN 6527 L Carbide

Ø h10

d mm

L mm

l mm

pcs.

cod.

cad/each

6 8 10 12 14 16 18 20

57 63 72 83 83 92 92 104

13 19 22 26 26 32 32 38

4 4 4 4 4 4 4 4

1 1 1 1 1 1 1 1

241820600 241820800 241821000 241821200 241821400 241821600 241821800 241822000

134,830 154,224 168,836 200,259 279,922 380,401 422,993 464,691

Rompitruciolo tipo NRF

Fresa per cave

Chip-breaker NRF type

Packaging

Slot end mills

Sgrossatura Roughing

HB - DIN 6535

30°

Confezione

€

Ø 1÷2

Ø 1÷2 Ø

Ø 0,5÷1

Applicazioni Applications

R < 1200 N/mm2 Acciaio Steel

R < 750 N/mm2

INOX

Inox Stainless

Alu

Alluminio Aluminum Si > 5%

Emulsione Lubrificant

Ghisa Cast Iron HB30<200

a secco dry

423

FRESE FRONTALI A 4 TAGLIENTI A ELICA VARIABILE IN METALLO DURO INTEGRALE Four flutes carbide end mills with variable helix

Serie lunga Long serie

24169

24171

VHM DIN 6527 L

DIN 6527 L

TiAlN

Ø h10

d d1 L l mm mm mm mm

pcs.

cod.

cad/each

Ø h10

d d1 L l mm mm mm mm

pcs.

cod.

cad/each

4 5 6 8 10 12 14 16 18 20

6 6 6 8 10 12 14 16 18 20

4 4 4 4 4 4 4 4 4 4

1 1 1 1 1 1 1 1 1 1

241690400 241690500 241690600 241690800 241691000 241691200 241691400 241691600 241691800 241692000

46,790 46,790 45,835 53,473 89,762 127,955 173,789 211,986 305,564 353,309

4 5 6 8 10 12 14 16 18 20

6 6 6 8 10 12 14 16 18 20

4 4 4 4 4 4 4 4 4 4

1 1 1 1 1 1 1 1 1 1

241710400 241710500 241710600 241710800 241711000 241711200 241711400 241711600 241711800 241712000

53,135 53,135 64,685 89,328 135,533 172,496 232,561 298,787 412,758 465,122

3,7 57 4,7 57 5,5 57 7,5 63 9,2 72 11,2 83 13,2 83 15,0 92 17,0 92 19,0 104

11 13 13 19 22 26 26 32 32 38

€

VHM

3,7 57 4,7 57 5,5 57 7,5 63 9,2 72 11,2 83 13,2 83 15,0 92 17,0 92 19,0 104

Fresa per cave

Sgrossatura

Slot end mills

Ø 1÷2

11 13 13 19 22 26 26 32 32 38

Finitura

Roughing

Ø 1÷2

Superfinitura

Finishing

Ø 1÷2

Ø 0,5÷1

€

Superfinishing

Ø 1,5÷2

Ø 0,1÷0,2

Ø 0,02÷0,05

Serie extra lunga

Extra long serie

24170

VHM

NORMA KRINO

24172

Krino norm

d d1 L l mm mm mm mm

pcs.

cod.

cad/each

Ø mm

d d1 L l mm mm mm mm

pcs.

cod.

cad/each

10 12 14 16 18 20

4 4 4 4 4 4

1 1 1 1 1 1

241701000 241701200 241701400 241701600 241701800 241702000

182,079 291,327 386,007 517,104 582,652 680,973

10 12 14 16 18 20

4 4 4 4 4 4

1 1 1 1 1 1

241721000 241721200 241721400 241721600 241721800 241722000

223,172 320,612 568,008 588,784 852,012 830,855

100 150 150 150 150 150

40 45 45 65 65 65

Confezione

Acciaio Steel

Ø 2,5÷3

d L

INOX

Alu

Alluminio Aluminum Si 3÷12%

Finishing

Ø 2,5÷3 Ø 0,5÷1

R > 750 N/mm2 Inox Stainless

Finitura

Roughing

Superfinitura Superfinishing

Ø 2,5÷3

Applications

40 45 45 65 65 65

€

HA - DIN 6535

Applicazioni

100 150 150 150 150 150

Sgrossatura

Variable helix 35°-38°

35° + 38°

R < 1600 N/mm2

9,2 11,2 13,2 15,0 17,0 19,0

Eliche variabili 35°-38°

Packaging

424

NORMA KRINO

TiAlN

Ø mm

9,2 11,2 13,2 15,0 17,0 19,0

€

VHM

Emulsione Lubrificant

Ghisa Cast Iron HB30<200

a secco dry

Ø 0,1÷0,2

Ø 0,02÷0,05

FRESE FRONTALI A 4 TAGLIENTI A ELICA VARIABILE IN METALLO DURO INTEGRALE - SPECIALI PER INOX Four flutes carbide end mills with variable helix

Serie lunga Long serie

24174

VHM

DIN 6527 L

TiAlN

24175

Carbide

Speciale inox / Stainless steel

VHM

TiAlN

DIN 6527 L Carbide

Speciale inox / Stainless steel

Ø h10

d d1 L l mm mm mm mm

pcs.

cod.

cad/each

Ø h10

d d1 L l mm mm mm mm

pcs.

cod.

cad/each

4 5 6 8 10 12 16 20

6 6 6 8 10 12 16 20

4 4 4 4 4 4 4 4

1 1 1 1 1 1 1 1

241740400 241740500 241740600 241740800 241741000 241741200 241741600 241742000

75,744 75,744 92,688 129,563 193,349 247,167 426,563 657,783

4 5 6 8 10 12 16 20

6 6 6 8 10 12 16 20

4 4 4 4 4 4 4 4

1 1 1 1 1 1 1 1

241750400 241750500 241750600 241750800 241751000 241751200 241751600 241752000

78,242 78,242 95,744 133,835 199,722 255,315 440,625 679,468

3,7 57 4,7 57 5,5 57 7,5 63 9,2 72 11,2 83 15,0 92 19,0 104

11 13 13 19 22 26 32 38

€

3,7 57 4,7 57 5,5 57 7,5 63 9,2 72 11,2 83 15,0 92 19,0 104

11 13 13 19 22 26 32 38

HA - DIN 6535

40° - 42° Ø

€

HB - DIN 6535 d

l L

Fresa per cave

Sgrossatura

Slot end mills

Finitura

Roughing

Finishing

Superfinitura Superfinishing

Confezione Packaging

Ø 1÷2

Ø 0,5÷1

Ø 1,5÷2

Ø 0,1÷0,2

Ø 0,02÷0,05

Applicazioni Applications

R < 750 N/mm2

INOX

Inox Stainless

R < 1000 N/mm2 Acciaio Steel

Alu

Alluminio Aluminum Si <3%

Emulsione Lubrificant

Ghisa Cast Iron HB30<200

a secco dry

425

FRESE FRONTALI A 6 E PIÙ TAGLIENTI PER SUPERFINITURA IN METALLO DURO INTEGRALE RIV. TIALN Two-flutes carbide end mills

Serie lunga Long serie

24177

VHM

24185

DIN 6527 L

TiAlN

VHM

DIN 6527 L

TiAlN

Per materiali con HRC < 50 / Suitable for materials with HRC < 50

Ø h10

d L l mm mm mm

pcs.

cod.

cad/each

Ø h10

d L l mm mm mm

pcs.

cod.

cad/each

3 4 5 6 8 10 12 14 16 18 20 25

6 6 6 6 8 10 12 14 16 18 20 25

6 6 6 6 6 6 6 6 6 8 8 10

1 1 1 1 1 1 1 1 1 1 1 1

241770300 241770400 241770500 241770600 241770800 241771000 241771200 241771400 241771600 241771800 241772000 241772500

64,820 61,410 58,851 58,851 69,938 112,582 151,815 208,106 272,926 318,983 383,515 630,298

6 8 10 12 14 16 18 20 25

6 6 6 6 6 6 8 8 10

1 1 1 1 1 1 1 1 1

241850600 241850800 241851000 241851200 241851400 241851600 241851800 241852000 241852500

64,533 76,740 122,089 162,202 226,736 287,779 338,360 415,101 676,719

57 57 57 57 63 72 83 83 92 92 104 121

8 11 13 13 19 22 26 26 32 32 38 45

Confezione

57 63 72 83 83 92 92 104 121

13 19 22 26 26 32 32 38 45

HA - DIN 6535

45°

Packaging

€

HB - DIN 6535

45° Ø

d l

€

d l

Superfinitura

Finitura Finishing

Superfinishing

Applicazioni Applications

R < 750 N/mm2

INOX

Inox Stainless

Ø 1÷2

R < 1600 N/mm2 Acciaio Steel

Alu

Alluminio Aluminum Si 3÷12%

Ghisa Cast Iron HB30<200

Emulsione Lubrificant

a secco dry

Ø 1,5÷2 Ø 0,1÷0,2

Ø 0,02÷0,05

Serie extra lunga

Extra long serie

24178

VHM

TiAlN Confezione Packaging

NORMA KRINO

Krino norm

Per materiali con HRC < 50 / Suitable for materials with HRC < 50 Ø h10

d mm

L mm

l mm

pcs.

cod.

6 8 10 12 16 20 25

75 100 100 150 150 150 150

30 40 40 45 65 65 75

6 6 6 6 6 8 10

1 1 1 1 1 1 1

241780600 241780800 241781000 241781200 241781600 241782000 241782500

91,232 106,126 188,048 260,659 469,189 714,953 1.459,231

Finitura

Superfinitura

HA - DIN 6535

45° Ø

Finishing

Ø 2,5÷3

Applications

426

Inox Stainless

Ø 2,5÷3 Ø 0,1÷0,2

Applicazioni

INOX

R < 1600 N/mm2 Acciaio Steel

Alu

Alluminio Aluminum Si 3÷12%

Superfinishing

d l

R < 750 N/mm2

€ cad/each

Emulsione Lubrificant

Ghisa Cast Iron HB30<200

a secco dry

Ø 0,02÷0,05

FRESE FRONTALI A 6 E PIÙ TAGLIENTI PER SUPERFINITURA IN METALLO DURO INTEGRALE RIV. TIALN Two-flutes carbide end mills

Serie lunga Long serie

24186

VHM

DIN 6527 L

TiAlN

Per materiali con HRC < 62 / Suitable for materials with HRC < 62

Confezione Packaging

Ø h10

d mm

L mm

l mm

pcs.

cod.

cad/each

3 4 5 6 8 10 12 14 16 18 20

6 6 6 6 8 10 12 14 16 18 20

57 57 57 57 63 72 83 83 92 92 104

8 11 13 13 19 22 26 26 32 32 38

6 6 6 6 6 6 6 6 6 8 8

1 1 1 1 1 1 1 1 1 1 1

241860300 241860400 241860500 241860600 241860800 241861000 241861200 241861400 241861600 241861800 241862000

94,874 97,469 99,749 100,248 121,587 195,495 263,027 352,487 486,531 513,834 659,640

Finitura

Superfinitura

Applicazioni Applications

Acciaio Steel HRC<62 Ghisa Cast Iron HB30<200

Emulsione Lubrificant

Finishing

HA - DIN 6535

55° Ø

d l

€

Ø 1÷2

Ø 1,5÷2 Ø 0,1÷0,2

a secco dry

Superfinishing

Ø 0,02÷0,05

Serie lunga Long serie

24176

VHM

DIN 6527 L

TiAlN

Universle - Elica variabile / Universal - Variable helix

Confezione Packaging

Ø h10

d mm

d1 mm

L mm

l mm

pcs.

cod.

8 10 12 16 20 25

7,5 9,2 11,2 15,0 19,0 23,5

63 72 83 92 104 121

19 22 26 32 38 45

6 6 6 6 6 6

1 1 1 1 1 1

241760800 241761000 241761200 241761600 241762000 241762500

116,488 186,973 251,299 450,594 649,733 1.047,193

Finitura

Superfinitura

Finishing

HA - DIN 6535

44° - 45° - 46° Ø

d l

€ cad/each

d1 L

Ø 1÷2

Ø 1,5÷2 Ø 0,1÷0,2

Applicazioni

Superfinishing

Ø 0,02÷0,05

Applications

R < 750 N/mm2

INOX

Inox Stainless

R < 1600 N/mm2 Acciaio Steel

Alu

Alluminio Aluminum Si 3÷12%

Emulsione Lubrificant

Ghisa Cast Iron HB30<200

a secco dry

427

FRESE FRONTALI IN METALLO DURO INTEGRALE PER ALLUMINIO Carbide end mills for aluminium

Serie corta Short serie

24154

VHM

DIN 6527 K Confezione Packaging

Applicazioni Applications

Alu

Alluminio Aluminum Si<12%

Ø e8

d mm

L mm

l mm

pcs.

cod.

cad/each

3 4 5 6 8 10 12 14 16 18 20

6 6 6 6 8 10 12 14 16 18 20

50 54 54 54 58 66 73 75 82 84 92

4 5 6 7 9 11 12 14 16 18 20

2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1

241540300 241540400 241540500 241540600 241540800 241541000 241541200 241541400 241541600 241541800 241542000

33,371 33,371 33,371 33,371 40,043 53,905 85,990 119,362 128,345 174,550 231,022

Fresa per cave

Emulsione Lubrificant

€

Sgrossatura

Slot end mills

Finitura

Roughing

Finishing

HA - DIN 6535

45° Ø

d l

Ø 0,5÷1

L Ø

Ø 0,5÷1

Ø 0,1÷0,2

Serie extra lunga

Extra long serie

24155

VHM

NORMA KRINO Krino norm Confezione Packaging

Ø h10

d mm

L mm

l mm

pcs.

cod.

cad/each

5 6 8 10 12 16

75 75 100 100 150 150

30 30 40 40 45 65

2 2 2 2 2 2

1 1 1 1 1 1

241550500 241550600 241550800 241551000 241551200 241551600

65,329 88,712 107,222 150,317 236,565 433,704

Fresa per cave Applicazioni

45°

Applications

Alu

Alluminio Aluminum Si<3%

Ø Emulsione Lubrificant

Sgrossatura

Slot end mills

HA - DIN 6535

Ø 1÷2

Frese per copiatori

Roughing

d Ø 1,5÷2

€

Ball nose end mills

max r/2

L Ø 0,5÷1

Ø 0,02÷0,05

Ø/2 - r

Nella lavorazione di alluminio, superleghe di titanio e quando ci sia pericolo di incollaggio trucioli si consiglia l’uso di fresatura concorde, che è anche indicata nel caso di lavorazioni di spessori sottili, perch le forze di taglio aiutano a tenere saldo il pezzo in lavorazione. When machining aluminum, titanium superalloys and whenever there is a risk of chip bonding, we recommend the use of concordant milling, which is also suitable for thin-wall machining, because the cutting forces help to keep the workpiece firmly in place.

428

FRESE FRONTALI IN METALLO DURO INTEGRALE PER ALLUMINIO Carbide end mills for aluminium

Serie lunga Long serie

24180

VHM

NORMA KRINO Krino norm

Speciale alluminio / Aluminium

Confezione Packaging

Ø h10

d mm

d1 mm

L mm

l mm

pcs.

cod.

cad/each

3 4 5 6 8 10 12 16 20

6 6 6 6 8 10 12 16 20

2,7 3,7 4,7 5,5 7,5 9,2 11,2 11,2 19,0

57 57 57 57 63 72 83 92 104

8 11 13 13 16 19 22 32 38

3 3 3 3 3 3 3 3 3

1 1 1 1 1 1 1 1 1

241800300 241800400 241800500 241800600 241800800 241801000 241801200 241801600 241802000

60,005 60,917 61,210 58,600 77,267 108,027 155,925 266,697 423,882

Metallo duro Carbide

Fresa per cave

Applicazioni

Alu

Alluminio Aluminum

Sgrossatura

Slot end mills

Applications

€

Finitura

Roughing

Finishing

39° - 40° - 41° HA - DIN 6535 Emulsione Lubrificant

Ø l

Ø 1÷2

d1 L

Ø 0,5÷1

Ø 0,1÷0,2

Le eliche variabili garantiscono minori vibrazioni, migliore finitura, maggiore rendimento. The variable helix ensures less vibration, better finishing, higher efficiency.

Serie lunga Long serie

24156

VHM

~ DIN 6527 L Canalina di lubrorefrigerazione / Cooling System Confezione Packaging

Ø h10

d mm

d1 mm

L mm

l mm

r mm

pcs.

cod.

cad/each

6 8 10 12 16 20

5,7 7,7 9,5 11,5 15,5 19,5

57 63 72 83 92 104

10 16 19 22 26 32

1 1 1,5 1,5 2 2,5

3 3 3 3 3 3

1 1 1 1 1 1

241560600 241560800 241561000 241561200 241561600 241562000

90,902 102,265 181,806 263,618 420,424 595,412

Taglienti raggiati Corner radius

Sgrossatura OIL 64°

Applicazioni

Alu

r Emulsione Lubrificant

Superfinitura

Roughing

HA - DIN 6535

Frese per copiatori

Superfinishing

Ball nose end mills

Applications

Alluminio Aluminum Si<12%

FLUTE 45°

d l L

Ø 1÷2

Ø 1,5÷2 Ø 0,5÷1

Ø 0,02÷0,05

€

max r/2

Ø/2 - r

429

FRESE FRONTALI A RAGGIO IN METALLO DURO INTEGRALE Carbide end mills with ball end

Serie lunga Long serie

24157

24159

VHM DIN 6527 L

TiAlN

DIN 6527 L

Ø h10

d L mm mm

l mm

pcs.

cod.

cad/each

Ø h10

d L mm mm

l mm

pcs.

cod.

cad/each

2 3 4 5 6 8 10 12 14 16 18 20

6 6 6 6 6 8 10 12 14 16 18 20

6 7 8 10 10 16 19 22 22 26 26 32

2 2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1 1

241570200 241570300 241570400 241570500 241570600 241570800 241571000 241571200 241571400 241571600 241571800 241572000

46,862 46,547 45,506 46,547 45,506 54,158 69,108 103,225 132,740 163,188 196,207 260,114

2 3 4 5 6 8 10 12 14 16 18 20

6 6 6 6 6 8 10 12 14 16 18 20

6 7 8 10 10 16 19 22 22 26 26 32

2 2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1 1

241590200 241590300 241590400 241590500 241590600 241590800 241591000 241591200 241591400 241591600 241591800 241592000

62,016 57,309 57,309 57,309 57,309 68,252 87,110 130,062 167,264 205,615 247,186 327,742

57 57 57 57 57 63 72 83 83 92 92 104

€

VHM

57 57 57 57 57 63 72 83 83 92 92 104

€

Frese per copiatori Ball nose end mills

Ø 0,05÷0,1

Ø 0,02÷0,05

Serie extra lunga

Extra Long seriel

24158

VHM

NORMA KRINO

24160

Krino norm

TiAlN

NORMA KRINO Krino norm

Ø h10

d L mm mm

l mm

pcs.

cod.

cad/each

Ø h10

d L mm mm

l mm

pcs.

cod.

cad/each

3 4 5 6 8 10 12

20 25 30 30 40 40 45

2 2 2 2 2 2 2

1 1 1 1 1 1 1

241580300 241580400 241580500 241580600 241580800 241581000 241581200

81,999 83,798 93,741 104,585 119,028 160,500 212,717

3 4 5 6 8 10 12

20 25 30 30 40 40 45

2 2 2 2 2 2 2

1 1 1 1 1 1 1

241600300 241600400 241600500 241600600 241600800 241601000 241601200

117,258 119,878 134,051 149,535 170,259 229,515 304,252

75 75 75 75 100 100 150

€

VHM

75 75 75 75 100 100 150

€

Frese per copiatori Confezione

Ball nose end mills

Packaging

l Ø

Ø 0,02÷0,05

Applicazioni Applications

R < 850 N/mm2 Acciaio Steel

430

Ø 0,05÷0,1 d

Metalli Metals

Alu

Alluminio Aluminum Si 3÷12%

Emulsione Lubrificant

FRESE FRONTALI A RAGGIO IN METALLO DURO INTEGRALE Carbide end mills with ball end

Serie lunga Long serie

24179

VHM

TiAlN

Confezione Packaging

DIN 6528 Ø h10

d mm

L mm

l mm

pcs.

cod.

cad/each

€

4 5 6 8 10 12 14 16 18 20

50 50 57 63 72 83 83 92 92 104

11 13 13 19 22 26 26 32 32 38

4 4 4 4 4 4 4 4 4 4

1 1 1 1 1 1 1 1 1 1

241790400 241790500 241790600 241790800 241791000 241791200 241791400 241791600 241791800 241792000

54,028 58,415 60,236 75,844 104,484 142,706 175,616 221,781 280,209 344,061

Frese per copiatori Ball nose end mills

Applicazioni Applications

Ø 0,05÷0,1

R < 1200 N/mm2 Acciaio Steel

Metalli Metals Alu

Alluminio Aluminum Si 3÷12%

Emulsione Lubrificant

Ghisa Cast Iron HB30<200

a secco dry

Ø 0,02÷0,05

431

FRESE FRONTALI CILINDRICHE A 2 TAGLIENTI IN HSS-CO 8 CON ATTACCO ELDON HSS-CO 8% two flutes end mills, Weldon shank

Serie corta Short serie

24001 Ø 2 2,5 3 3,5 4 4,5 5 5,5 6 6,5 7 7,5 8 8,5 9 9,5 10 11 12 13 14 15 16 18 20

24003

HSS-CO 8% DIN 327 D tol.

d L l mm mm mm

pcs.

cod.

cad/each

e8 e8 e8 h10 e8 h10 e8 h10 e8 h10 e8 h10 e8 h10 h10 h10 e8 h10 e8 h10 e8 h10 e8 e8 e8

6 6 6 6 6 6 6 6 6 10 10 10 10 10 10 10 10 12 12 12 12 12 16 16 20

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

240010200 240010250 240010300 240010350 240010400 240010450 240010500 240010550 240010600 240010650 240010700 240010750 240010800 240010850 240010900 240010950 240011000 240011100 240011200 240011300 240011400 240011500 240011600 240011800 240012000

15,730 16,977 15,730 16,903 15,730 16,903 15,730 16,903 15,730 24,321 24,321 24,321 22,583 24,321 24,321 24,321 22,583 32,281 30,063 34,774 34,082 41,085 41,702 50,014 59,713

48 49 49 51 51 52 52 52 52 60 60 61 61 61 61 63 63 73 73 73 73 79 79 79 88

4 5 5 7 7 8 8 8 8 10 10 11 11 11 11 13 13 16 16 16 16 19 19 19 22

€

Ø 2 2,5 3 3,5 4 4,5 5 5,5 6 6,5 7 7,5 8 8,5 9 9,5 10 11 12 13 14 15 16 18 20

HSS-CO 8%

DIN 327 D

TiAlN

tol.

d L l mm mm mm

pcs.

cod.

cad/each

e8 e8 e8 h10 e8 h10 e8 h10 e8 h10 e8 h10 e8 h10 h10 h10 e8 h10 e8 h10 e8 h10 e8 e8 e8

6 6 6 6 6 6 6 6 6 10 10 10 10 10 10 10 10 12 12 12 12 12 16 16 20

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

240030200 240030250 240030300 240030350 240030400 240030450 240030500 240030550 240030600 240030650 240030700 240030750 240030800 240030850 240030900 240030950 240031000 240031100 240031200 240031300 240031400 240031500 240031600 240031800 240032000

23,976 26,466 24,107 24,894 23,131 25,357 22,999 24,500 22,402 31,249 31,066 32,817 29,815 32,192 33,146 34,196 34,556 42,422 39,982 46,082 43,506 51,170 57,325 65,187 79,003

48 49 49 51 51 52 52 52 52 60 60 61 61 61 61 63 63 73 73 73 73 79 79 79 88

4 5 5 7 7 8 8 8 8 10 10 11 11 11 11 13 13 16 16 16 16 19 19 19 22

€

Fresa per cave Slot end mills

Ø 0,5÷1 Ø

Serie lunga Long serie

24002

24004

HSS-CO 8% DIN 844 L

Ø h10

d L mm mm

l mm

pcs.

3 4 5 6 8 10 12 14 16 18 20

6 6 6 6 10 10 12 12 16 16 20

12 19 24 24 38 45 53 53 63 63 75

2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1

56 63 68 68 88 95 110 110 123 123 141

TiAlN

cad/each

Ø h10

d L mm mm

l mm

pcs.

240020300 25,492 240020400 25,492 240020500 25,492 240020600 25,492 240020800 35,882 240021000 35,882 240021200 47,660 240021400 55,116 240021600 67,365 240021800 89,603 240022000 100,583

3 4 5 6 8 10 12 14 16 18 20

6 6 6 6 10 10 12 12 16 16 20

12 19 24 24 38 45 53 53 63 63 75

2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1

cod.

€

HSS-CO 8%

56 63 68 68 88 95 110 110 123 123 141

DIN 844 L €

cod.

cad/each

240040300 35,854 240040400 36,694 240040500 36,694 240040600 35,089 240040800 46,082 240041000 46,379 240041200 58,956 240041400 76,351 240041600 101,197 240041800 121,075 240042000 140,200

Confezione Packaging

Fresa per cave Slot end mills

B - DIN 1835/1

30° Ø

d l

Applicazioni

Applications

Acciaio Steel

432

Metalli Metals

Emulsione Lubrificant

Ghisa Cast Iron HB30<200

Ø 2,5÷3

a secco Acciai e metalli con R 850 N/mm , ghisa con durezza HB30 200. dry Steel and metals with R 850 N/mm2, cast iron with HB30 200. 2

FRESE FRONTALI CILINDRICHE A 3 TAGLIENTI IN HSS-CO 8 CON ATTACCO ELDON HSS-CO 8% three flutes end mills, Weldon shank

Serie corta Short serie

24009

24011

HSS-CO 8% DIN 844 K

TiAlN

DIN 844 K

Ø e8

d L mm mm

l mm

pcs.

cod.

cad/each

Ø e8

d L mm mm

l mm

pcs.

cod.

cad/each

3 4 5 6 8 10 12 14 16 18 20

6 6 6 6 10 10 12 12 16 16 20

13 13 13 13 19 22 22 26 32 32 38

3 3 3 3 3 3 3 3 3 3 3

1 1 1 1 1 1 1 1 1 1 1

240090300 240090400 240090500 240090600 240090800 240091000 240091200 240091400 240091600 240091800 240092000

18,481 18,481 18,481 18,546 25,155 24,576 32,641 41,126 46,624 60,161 68,715

3 4 5 6 8 10 12 14 16 18 20

6 6 6 6 10 10 12 12 16 16 20

13 13 13 13 19 22 22 26 32 32 38

3 3 3 3 3 3 3 3 3 3 3

1 1 1 1 1 1 1 1 1 1 1

240110300 240110400 240110500 240110600 240110800 240111000 240111200 240111400 240111600 240111800 240112000

25,355 25,355 25,355 24,251 31,611 31,938 42,395 50,329 59,656 71,841 83,895

52 55 57 57 69 72 79 83 92 92 104

€

HSS-CO 8%

52 55 57 57 69 72 79 83 92 92 104

€

Fresa per cave Slot end mills

Ø 1÷2 Ø

Serie lunga Long serie

24010

24012

HSS-CO 8% DIN 844 L

TiAlN

DIN 844 L

cod.

Ø h10

d L mm mm

l mm

pcs.

cod.

cad/each

Ø h10

d L mm mm

l mm

pcs.

3 4 5 6 8 10 12 14 16 18 20

6 6 6 6 10 10 12 12 16 16 20

12 19 24 24 38 45 53 53 63 63 75

3 3 3 3 3 3 3 3 3 3 3

1 1 1 1 1 1 1 1 1 1 1

240100300 240100400 240100500 240100600 240100800 240101000 240101200 240101400 240101600 240101800 240102000

29,571 29,571 29,571 24,107 33,932 33,932 46,624 59,265 65,192 80,643 98,443

3 4 5 6 8 10 12 14 16 18 20

6 6 6 6 10 10 12 12 16 16 20

12 19 24 24 38 45 53 53 63 63 75

3 3 3 3 3 3 3 3 3 3 3

1 1 1 1 1 1 1 1 1 1 1

56 63 68 68 88 95 110 110 123 123 141

€

HSS-CO 8%

56 63 68 68 88 95 110 110 123 123 141

€ cad/each

240120300 34,326 240120400 34,326 240120500 34,326 240120600 32,748 240120800 41,815 240121000 43,066 240121200 57,190 240121400 74,677 240121600 89,615 240121800 111,480 240122000 126,452

Confezione Packaging

Ø 2,5÷3 L

Applications

Acciaio Steel

Slot end mills

d l

Applicazioni

Fresa per cave

B - DIN 1835/1

30°

Metalli Metals

Emulsione Lubrificant

Ghisa Cast Iron HB30<200

a secco Acciai e metalli con R 850 N/mm2, ghisa con durezza HB30 200. dry Steel and metals with R 850 N/mm2, cast iron with HB30 200.

433

FRESE FRONTALI CILINDRICHE A 4 TAGLIENTI IN HSS-CO 8 CON ATTACCO ELDON HSS-CO 8% four flutes end mills, Weldon shank

Serie corta Short serie

24013

24015

HSS-CO 8% DIN 844 K

HSS-CO 8%

TiAlN

DIN 844 K

Universale / Universal Ø k10

d L mm mm

l mm

pcs.

cod.

cad/each

Ø k10

d L mm mm

l mm

pcs.

3 4 5 6 7 8 9 10 12 14 16 18 20 22

6 6 6 6 10 10 10 10 12 12 16 16 20 20

8 11 13 13 16 19 19 22 26 26 32 32 38 38

4 4 4 4 4 4 4 4 4 4 4 4 4 6

1 1 1 1 1 1 1 1 1 1 1 1 1 1

240130300 240130400 240130500 240130600 240130700 240130800 240130900 240131000 240131200 240131400 240131600 240131800 240132000 240132200

18,546 18,546 18,546 18,546 27,061 25,155 27,061 25,155 35,112 44,425 47,840 62,539 72,238 87,744

3 4 5 6 7 8 9 10 12 14 16 18 20 22

6 6 6 6 10 10 10 10 12 12 16 16 20 20

8 11 13 13 16 19 19 22 26 26 32 32 38 38

4 4 4 4 4 4 4 4 4 4 4 4 4 6

1 1 1 1 1 1 1 1 1 1 1 1 1 1

52 55 57 57 66 69 69 72 83 83 92 92 104 104

€

52 55 57 57 66 69 69 72 83 83 92 92 104 104

cod.

€ cad/each

240150300 28,625 240150400 27,239 240150500 27,239 240150600 27,035 240150700 37,178 240150800 35,515 240150900 36,912 240151000 35,588 240151200 47,118 240151400 57,262 240151600 69,911 240151800 84,091 240152000 95,221 240152200 117,111

Finitura Finishing

Ø 1,5÷2

Ø 0,1÷0,2

Serie lunga Long serie

24014

24016

HSS-CO 8% DIN 844 L

HSS-CO 8%

TiAlN

DIN 844 L

Universale / Universal Ø k10

d L mm mm

l mm

pcs.

4 5 6 8 10 12 14 16 18 20

6 6 6 10 10 12 12 16 16 20

19 24 24 38 45 53 53 63 63 75

4 4 4 4 4 4 4 4 4 4

1 1 1 1 1 1 1 1 1 1

63 68 68 88 95 110 110 123 123 141

cad/each

Ø k10

d L mm mm

l mm

pcs.

240140400 25,769 240140500 25,769 240140600 25,769 240140800 36,273 240141000 36,273 240141200 50,634 240141400 61,030 240141600 74,528 240141800 92,237 240142000 104,412

4 5 6 8 10 12 14 16 18 20

6 6 6 10 10 12 12 16 16 20

19 24 24 38 45 53 53 63 63 75

4 4 4 4 4 4 4 4 4 4

1 1 1 1 1 1 1 1 1 1

cod.

€

63 68 68 88 95 110 110 123 123 141

cod.

€ cad/each

240160400 37,370 240160500 36,741 240160600 35,247 240160800 47,704 240161000 49,263 240161200 63,565 240161400 80,347 240161600 100,795 240161800 119,965 240162000 129,893

Finitura Finishing

Ø 2,5÷3

Confezione Packaging

B - DIN 1835/1

30° Ø

Ø 0,1÷0,2 d

Applicazioni

Applications

Acciaio Steel

434

Metalli Metals

Emulsione Lubrificant

Ghisa Cast Iron HB30<200

a secco Acciai e metalli con R 850 N/mm2, ghisa con durezza HB30 200. dry Steel and metals with R 850 N/mm2, cast iron with HB30 200.

FRESE FRONTALI CILINDRICHE A 4 TAGLIENTI A SGROSSARE IN HSS-CO 8 CON ATTACCO ELDON

HSS-CO 8% four flutes end mills, Weldon shank for roughing purpose Serie corta Short serie

24017

24019

HSS-CO 8% DIN 844 K

TiAlN

DIN 844 K

cod.

Ø k12

d L mm mm

l mm

pcs.

cod.

cad/each

Ø k12

d L mm mm

l mm

pcs.

6 8 10 12 14 16 18 20

6 10 10 12 12 16 16 20

13 19 22 22 26 32 32 38

4 4 4 4 4 4 4 4

1 1 1 1 1 1 1 1

240170600 240170800 240171000 240171200 240171400 240171600 240171800 240172000

36,369 41,173 41,173 50,599 58,391 66,071 74,154 93,805

6 8 10 12 14 16 18 20

6 10 10 12 12 16 16 20

13 19 22 22 26 32 32 38

4 4 4 4 4 4 4 4

1 1 1 1 1 1 1 1

57 69 72 79 83 92 92 104

€

HSS-CO 8%

57 69 72 79 83 92 92 104

€ cad/each

240190600 45,298 240190800 52,165 240191000 59,245 240191200 63,195 240191400 72,229 240191600 86,450 240191800 94,567 240192000 116,536 Sgrossatura Roughing

Ø 1,5÷2

Ø 0,5÷1

Serie lunga Long serie

24018

24020

HSS-CO 8% DIN 844 L

TiAlN

DIN 844 L

Ø k12

d L mm mm

l mm

pcs.

cod.

cad/each

Ø k12

d L mm mm

l mm

pcs.

cod.

cad/each

6 8 10 12 14 16 18 20 22 25 28

6 10 10 12 12 16 16 20 20 25 25

24 38 45 53 53 63 63 75 75 90 90

4 4 4 4 4 4 4 4 4 4 4

1 1 1 1 1 1 1 1 1 1 1

240180600 240180800 240181000 240181200 240181400 240181600 240181800 240182000 240182200 240182500 240182800

51,096 52,520 53,873 71,782 71,945 90,467 109,443 120,326 205,510 244,770 280,985

6 8 10 12 14 16 18 20 22 25 28

6 10 10 12 12 16 16 20 20 25 25

24 38 45 53 53 63 63 75 75 90 90

4 4 4 4 4 4 4 4 4 4 4

1 1 1 1 1 1 1 1 1 1 1

240200600 240200800 240201000 240201200 240201400 240201600 240201800 240202000 240202200 240202500 240202800

58,203 64,548 64,726 89,384 86,637 113,649 134,020 162,203 252,311 310,678 352,224

68 88 95 110 110 123 123 141 141 166 166

€

HSS-CO 8%

68 88 95 110 110 123 123 141 141 166 166

Sgrossatura

Rompitruciolo tipo NR

Roughing

Chip-breaker NR type

30°

Confezione

B - DIN 1835/1

Packaging

€

d l

Ø 2,5÷3 Ø 0,5÷1

Applicazioni Applications

Acciaio Steel

Metalli Metals

Emulsione Lubrificant

Ghisa Cast Iron HB30<200

Acciai e metalli con R 850 N/mm2, ghisa con durezza HB30 200, acciai molto duri con R 1000 N/mm2. a secco Steel and metals with R 850 N/mm2, cast iron with HB30 200, dry hard steel with R 1000 N/mm2. 435

FRESE FRONTALI CIL. A 4 TAGLIENTI PER SEMIFINITURA IN HSS-CO 8 CON ATTACCO ELDON

HSS-CO 8% four flutes end mills, Weldon shank for finishing purpose Serie corta

Short serie

24021

24023

HSS-CO 8% DIN 844 K

Ø k12

d L mm mm

l mm

pcs.

6 8 10 12 14 16 18 20

6 10 10 12 12 16 16 20

13 19 22 26 26 32 32 38

4 4 4 4 4 4 4 4

1 1 1 1 1 1 1 1

57 69 72 83 83 92 92 104

TiAlN

DIN 844 K

cad/each

Ø k12

d L mm mm

l mm

pcs.

cod.

cad/each

240210600 50,900 240210800 53,596 240211000 65,909 240211200 72,995 240211400 87,396 240211600 100,208 240211800 105,814 240212000 120,486

6 8 10 12 14 16 18 20

6 10 10 12 12 16 16 20

13 19 22 26 26 32 32 38

4 4 4 4 4 4 4 4

1 1 1 1 1 1 1 1

240230600 240230800 240231000 240231200 240231400 240231600 240231800 240232000

60,185 64,659 75,512 85,197 100,801 120,930 128,485 142,968

cod.

€

HSS-CO 8%

57 69 72 83 83 92 92 104

€

Semifinitura semifinishing

Ø 1,5÷2

Ø 0,5÷1

Serie lunga Long serie

24022

24024

HSS-CO 8% DIN 844 L

TiAlN

DIN 844 L

Ø k12

d L mm mm

l mm

pcs.

cod.

cad/each

Ø k12

d L mm mm

l mm

pcs.

cod.

cad/each

6 8 10 12 14 16 18 20 22 25 28

6 10 10 12 12 16 16 20 20 25 25

24 38 45 53 53 63 63 75 75 90 90

4 4 4 4 4 4 4 4 4 4 4

1 1 1 1 1 1 1 1 1 1 1

240220600 240220800 240221000 240221200 240221400 240221600 240221800 240222000 240222200 240222500 240222800

62,711 66,964 75,513 99,343 110,041 130,213 134,887 154,218 379,947 449,326 562,136

6 8 10 12 14 16 18 20 22 25 28

6 10 10 12 12 16 16 20 20 25 25

24 38 45 53 53 63 63 75 75 90 90

4 4 4 4 4 4 4 4 4 4 4

1 1 1 1 1 1 1 1 1 1 1

240240600 240240800 240241000 240241200 240241400 240241600 240241800 240242000 240242200 240242500 240242800

76,390 80,492 89,840 118,929 134,605 156,728 170,238 192,705 469,361 566,479 704,209

68 88 95 110 110 123 123 141 141 166 166

€

HSS-CO 8%

68 88 95 110 110 123 123 141 141 166 166

€

Semifinitura semifinishing

Rompitruciolo tipo NF Chip-breaker NF type

30°

Confezione

Ø 2,5÷3

B - DIN 1835/1

Packaging

Ø 0,5÷1

l L

Applicazioni Applications

Acciaio Steel

436

Metalli Metals

Emulsione Lubrificant

Ghisa Cast Iron HB30<200

Acciai e metalli con R 850 N/mm2, ghisa con durezza HB30 200, acciai molto duri con R 1000 N/mm2. a secco Steel and metals with R 850 N/mm2, cast iron with HB30 200, dry hard steel with R 1000 N/mm2.

FRESE FRONTALI A RAGGIO IN HSS-CO 8 CON ATTACCO ELDON HSS-CO 8% round edge end mills, Weldon shank

Serie corta Short serie

24005

24007

HSS-CO 8% DIN 327 D

TiAlN

DIN 327 D cod.

Ø d L l e8 h10 mm mm mm

pcs.

cod.

cad/each

Ø d L l e8 h10 mm mm mm

pcs.

2 3 4 5 6 7 8 9 10 12 14 16 18 20

2 2 2 2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1 1 1 1

240050200 240050300 240050400 240050500 240050600 240050700 240050800 240050900 240051000 240051200 240051400 240051600 240051800 240052000

30,089 29,681 30,089 29,411 30,089 39,380 34,814 39,009 35,986 47,781 53,359 61,343 75,564 81,502

2 3 4 5 6 7 8 9 10 12 14 16 18 20

2 2 2 2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1 1 1 1

6 6 6 6 6 10 10 10 10 12 12 16 16 20

48 49 51 52 52 60 61 61 63 73 73 79 79 88

4 5 7 8 8 10 11 11 13 16 16 19 19 22

€

HSS-CO 8%

6 6 6 6 6 10 10 10 10 12 12 16 16 20

48 49 51 52 52 60 61 61 63 73 73 79 79 88

4 5 7 8 8 10 11 11 13 16 16 19 19 22

€ cad/each

240070200 40,334 240070300 40,131 240070400 38,356 240070500 38,872 240070600 39,648 240070700 49,543 240070800 46,320 240070900 49,514 240071000 46,894 240071200 60,165 240071400 64,994 240071600 79,422 240071800 88,848 240072000 103,763 Frese per cave Slot end mills

Ø 0,5÷1

Acciai e metalli con R 850 N/mm2, ghisa con durezza HB30 200. Steel and metals with R 850 N/mm2, cast iron with HB30 200.

Serie lunga Long serie

24006

HSS-CO 8%

NORMA KRINO

Ø h10

d L mm mm

l mm

pcs.

3 4 5 6 8 10 12 14 16 18 20

6 6 6 6 10 10 12 12 16 16 20

8 11 13 13 19 22 26 26 32 32 38

2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1

56 63 68 68 88 95 110 110 123 123 141

24008

Krino norm

TiAlN

cad/each

Ø h10

d L mm mm

l mm

pcs.

240060300 36,803 240060400 36,126 240060500 38,429 240060600 36,803 240060800 44,288 240061000 46,968 240061200 57,730 240061400 65,673 240061600 76,576 240061800 94,466 240062000 102,659

3 4 5 6 8 10 12 14 16 18 20

6 6 6 6 10 10 12 12 16 16 20

8 11 13 13 19 22 26 26 32 32 38

2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1

cod.

€

HSS-CO 8%

56 63 68 68 88 95 110 110 123 123 141

NORMA KRINO Krino norm

€

cod.

cad/each

240080300 46,082 240080400 46,134 240080500 46,894 240080600 46,134 240080800 54,523 240081000 59,671 240081200 71,818 240081400 80,852 240081600 101,181 240081800 121,919 240082000 140,486 Fresa per cave Slot end mills

Ø 2,5÷3

Confezione Packaging

Ø 30°

B - DIN 1835/1

Ø l

Applicazioni Applications

Acciaio Steel

L Metalli Metals

Emulsione Lubrificant

Ghisa Cast Iron HB30<200

a secco Acciai e metalli con R 850 N/mm2, ghisa con durezza HB30 200. dry

Steel and metals with R 850 N/mm2, cast iron with HB30 200. 437

FRESE FRONTALI CILINDRICHE A 4 TAGLIENTI IN HSS-CO 5 CON ATTACCO CONICO MORSE HSS-CO 5% Morse taper end mills

24025

HSS-CO 5%

Serie corta

DIN 845K

Confezione Packaging

Short serie

Ø k10

16 18 20 25 28 30 32 40

2 2 2 3 3 3 4 4

FORM

M10 M10 M10 M12 M12 M12 M16 M16

A A A A A A A A

L mm

l mm

pcs.

cod.

cad/each

€

117 117 123 147 147 147 178 178

32 32 38 45 45 45 53 63

4 4 4 6 6 6 6 6

1 1 1 1 1 1 1 1

240251600 240251800 240252000 240252500 240252800 240253000 240253200 240254000

71,805 75,543 85,102 114,048 127,784 137,679 166,128 240,663 Finitura Finishing

Ø 1,5÷2

Ø 0,1÷0,2

24026

HSS-CO 5%

Serie lunga

DIN 845L

Confezione Packaging

Long serie

Ø k10

16 20 25 28 32 40

2 2 3 3 4 4

FORM

M10 M10 M12 M12 M16 M16

A A A A A A

L mm

l mm

pcs.

cod.

148 160 192 192 231 250

63 75 90 90 106 125

4 4 6 6 6 6

1 1 1 1 1 1

240261600 240262000 240262500 240262800 240263200 240264000

€ cad/each

81,425 102,471 152,783 174,796 245,041 399,840 Finitura Finishing

30°

Form A-DIN 228

Filetto interno Internal thread

l L

Ø 2,5÷3

Ø 0,1÷0,2

Applicazioni Applications

Acciaio Steel

438

Metalli Metals

Emulsione Lubrificant

Ghisa Cast Iron HB30<200

a secco dry

Acciai e metalli con R 850 N/mm2, ghisa con durezza HB30 200. Steel and metals with R 850 N/mm2, cast iron with HB30 200.

FRESE FRONTALI CILINDRICHE A 4 TAGLIENTI A SGROSSARE IN HSS-CO 5 CON ATTACCO CONICO MORSE HSS-CO 5% Morse taper end mills for roughing purpose

24029

HSS-CO 5%

Serie corta

DIN 845K

Confezione Packaging

Short serie

Ø k10

16 18 20 25 28 30 40

2 2 2 3 3 3 4

FORM

M10 M10 M10 M12 M12 M12 M12

A A A A A A A

L mm

l mm

pcs.

cod.

cad/each

€

117 117 123 147 147 147 147

32 32 38 45 45 45 45

4 4 4 6 6 6 6

1 1 1 1 1 1 1

240291600 240291800 240292000 240292500 240292800 240293000 240294000

96,663 100,308 119,082 163,766 185,409 199,839 555,660 Sgrossatura Roughing

Ø 1,5÷2

Ø 0,5÷1

24030

HSS-CO 5%

Serie lunga

DIN 845L

Confezione Packaging

Long serie

Ø k10

16 20 25 28

2 2 3 3

FORM

M10 M10 M12 M12

A A A A

L mm

l mm

pcs.

cod.

148 160 192 192

63 75 90 90

4 4 6 6

1 1 1 1

240301600 240302000 240302500 240302800

Rompitruciolo tipo NR

129,864 165,241 235,216 269,815

Sgrossatura

Chip-breaker NR type

30°

€ cad/each

Roughing

Form A-DIN 228

Ø 2,5÷3

Filetto interno Internal thread

l L

Ø 0,5÷1

Applicazioni Applications

Acciaio Steel

Ghisa Cast Iron HB30<200

Emulsione Lubrificant

Metalli Metals

a secco dry

Acciai e metalli con R 850 N/mm2, ghisa con durezza HB30 200. Steel and metals with R 850 N/mm2, cast iron with HB30 200.

FRESA FRONTALE PER PANTOGRAFI A UN DENTE PER ALLUMINIO One flute end mills for aluminium

26100 1 Dente 1 Cutting edge

Applicazioni Applications

Alu

Alluminio Aluminum

Emulsione Lubrificant

Alu

HSS-G Confezione Packaging

Ø mm

d mm

L mm

l mm

cod.

cad/each

€

3 4 4 5 5 6 6 8 8 10

8 8 8 8 8 8 8 8 8 8

60 60 80 60 80 60 90 80 100 80

12 12 14 12 16 14 16 14 28 14

1 1 1 1 1 1 1 1 1 1

2610003060 2610004060 2610004080 2610005060 2610005080 2610006060 2610006090 2610008080 2610008100 2610010080

24,826 24,826 35,068 24,826 35,068 24,826 35,068 30,290 38,918 31,198

439

UTENSILI DA TORNIO SALDOBRASATI CON PLACCHETTA IN METALLO DURO Carbide brazed tools Forma / Shape

Confezione

Qualità metallo duro / Carbide quality

Packaging

P30

K10 - K20

Destro

Sinistro

Per accaio

Per ghisa

Right

Left

Suitable for steel

Suitable for cast iron

Utensile sgrossatore diritto per passata

28200

ISO 1 DIN 4971

Dimensione/ Dimension

Forma Shape

Qualità Quality

cod.

cad/each

Dimensione/ Dimension

Forma Shape

Qualità Quality

cod.

cad/each

8X8 X 80 8X8 X 80 10X10 X 90 10X10 X 90 10X10 X 90 12X12 X 100 12X12 X 100 12X12 X 100

R R R R L R R L

P30 K10 P30 K10 P30 P30 K10 P30

28200RP300808 28200RK100808 28200RP301010 28200RK101010 28200LP301010 28200RP301212 28200RK101212 28200LP301212

4,736 4,736 5,083 5,083 5,083 6,592 6,592 6,592

16X16 X 110 16X16 X 110 16X16 X 110 20X20 X 125 20X20 X 125 20X20 X 125 25X25 X 140 25X25 X 140

R R L R R L R R

P30 K10 P30 P30 K10 P30 P30 K10

28200RP301616 28200RK101616 28200LP301616 28200RP302020 28200RK102020 28200LP302020 28200RP302525 28200RK102525

10,752 10,752 10,752 13,504 13,504 13,504 19,521 19,521

Straight Turning Brazed Tools

€

Utensile sgrossatore piegato per passata

28202

ISO 2 DIN 4972

Dimensione/ Dimension

Forma Shape

Qualità Quality

cod.

cad/each

Dimensione/ Dimension

Forma Shape

Qualità Quality

cod.

cad/each

8X8 X 80 8X8 X 80 8X8 X 80 8X8 X 80 10X10 X 90 10X10 X 90 10X10 X 90 10X10 X 90 12X12 X 100 12X12 X 100 12X12 X 100 12X12 X 100 16X16 X 110 16X16 X 110

R L R L R L R L R L R L R L

P30 P30 K10 K10 P30 P30 K10 K10 P30 P30 K10 K10 P30 P30

28202RP300808 28202LP300808 28202RK100808 28202LK100808 28202RP301010 28202LP301010 28202RK101010 28202LK101010 28202RP301212 28202LP301212 28202RK101212 28202LK101212 28202RP301616 28202LP301616

5,121 5,121 5,121 5,121 6,720 6,720 6,720 6,720 10,368 10,368 10,368 10,368 13,184 13,184

16X16 X 110 16X16 X 110 20X20 X 125 20X20 X 125 20X20 X 125 20X20 X 125 25X25 X 140 25X25 X 140 25X25 X 140 25X25 X 140 32X32 X 170 32X32 X 170 32X32 X 170 32X32 X 170

R L R L R L R L R L R L R L

K10 K10 P30 P30 K10 K10 P30 P30 K10 K10 P30 P30 K10 K10

28202RK101616 28202LK101616 28202RP302020 28202LP302020 28202RK102020 28202LK102020 28202RP302525 28202LP302525 28202RK102525 28202LK102525 28202RP303232 28202LP303232 28202RK103232 28202LK103232

13,184 13,184 17,984 17,984 17,984 17,984 21,120 21,120 21,120 21,120 28,865 28,865 28,865 28,865

440

Bent Turning Brazed Tools

€

UTENSILI DA TORNIO SALDOBRASATI CON PLACCHETTA IN METALLO DURO Carbide brazed tools

Utensile cur o per finitura

28204

ISO 3 DIN 4978

Dimensione/ Dimension

Forma Shape

Qualità Quality

cod.

cad/each

Dimensione/ Dimension

Forma Shape

Qualità Quality

cod.

cad/each

10X10 X 90 10X10 X 90 10X10 X 90 10X10 X 90 10X16 x 110 10X16 x 110 10X16 x 110 10X16 x 110 12X12 X 100 12X12 X 100 12X12 X 100 12X12 X 100 12X20 x 125 12X20 x 125 12X20 x 125 12X20 x 125 16X16 X 110 16X16 X 110

R L R L R L R L R L R L R L R L R L

P30 P30 K10 K10 P30 P30 K10 K10 P30 P30 K10 K10 P30 P30 K10 K10 P30 P30

28204RP301010 28204LP301010 28240RK101010 28204LK101010 28204RP301016 28204LP301016 28204RK101016 28204LK101016 28204RP301212 28204LP301212 28204RK101212 28204LK101212 28204RP301220 28204LP301220 28204RK101220 28204LK101220 28204RP301616 28204LP301616

4,352 4,352 4,352 4,352 9,536 9,408 9,536 9,408 5,760 5,760 5,760 5,760 14,145 14,145 14,145 14,145 9,536 9,536

16X16 X 110 16X16 X 110 16X25 x 140 16X25 x 140 16X25 x 140 16X25 x 140 20X20 X 125 20X20 X 125 20X20 X 125 20X20 X 125 20X32 x 170 20X32 x 170 20X32 x 170 20X32 x 170 25X25 X 140 25X25 X 140 25X25 X 140 25X25 X 140

R L R L R L R L R L R L R L R L R L

K10 K10 P30 P30 K10 K10 P30 P30 K10 K10 P30 P30 K10 K10 P30 P30 K10 K10

28204RK101616 28204LK101616 28204RP301625 28204LP301625 28204RK101625 28204LK101625 28204RP302020 28204LP302020 28204RK102020 28204LK102020 28204RP302032 28204LP302032 28204RK102032 28204LK102032 28204RP302525 28204LP302525 28204RK102525 28204LK102525

9,536 9,536 17,601 17,601 17,601 17,601 11,584 11,584 11,584 11,584 29,953 29,953 29,953 29,953 16,500 16,500 16,500 16,500

Off Set Turning Brazed Tools For Corner Work

€

Utensile frontale a testa larga

28206

ISO 4 DIN 4976

Dimensione/ Dimension

Forma Shape

Qualità Quality

cod.

cad/each

Dimensione/ Dimension

Forma Shape

Qualità Quality

cod.

cad/each

8X8 x 80 8X8 x 80 10X10 x 90 10X10 x 90 12X12 x 100 12X12 x 100

R R R R R R

P30 K10 P30 K10 P30 K10

28206RP300808 28206RK100808 28206RP301010 28206RK101010 28206RP301212 28206RK101212

5,184 5,184 6,272 6,272 10,240 10,240

16X16 x 110 16X16 x 110 20X20 x 125 20X20 x 125 25X25 x 140 25X25 x 140

R R R R R R

P30 K10 P30 K10 P30 K10

28206RP301616 28206RK101616 28206RP302020 28206RK102020 28206RP302525 28206RK102525

11,904 11,904 17,601 17,601 20,992 20,992

Wide Face Square Nose Brazed Tools

€

441

UTENSILI DA TORNIO SALDOBRASATI CON PLACCHETTA IN METALLO DURO Carbide brazed tools

Utensile piegato a spianare e intestare

28208

ISO 5 DIN 4977

Dimensione/ Dimension

Forma Shape

Qualità Quality

cod.

cad/each

Dimensione/ Dimension

Forma Shape

Qualità Quality

cod.

cad/each

8X8 x 80 8X8 x 80 8X8 x 80 8X8 x 80 10X10 x 90 10X10 x 90 10X10 x 90 10X10 x 90 12X12 x 100 12X12 x 100 12X12 x 100 12X12 x 100

R L R L R L R L R L R L

P30 P30 K10 K10 P30 P30 K10 K10 P30 P30 K10 K10

28208RP300808 28208LP300808 28208RK100808 28208LK100808 28208RP301010 28208LP301010 28208RK101010 28208LK101010 28208RP301212 28208LP301212 28208RK101212 28208LK101212

4,096 4,096 4,096 4,096 4,864 4,864 4,864 4,864 7,361 7,361 7,361 7,361

16X16 x 110 16X16 x 110 16X16 x 110 16X16 x 110 20X20 x 125 20X20 x 125 20X20 x 125 20X20 x 125 25X25 x 140 25X25 x 140 25X25 x 140 25X25 x 140

R L R L R L R L R L R L

P30 P30 K10 K10 P30 P30 K10 K10 P30 P30 K10 K10

28208RP301616 28208LP301616 28208RK101616 28208LK101616 28208RP302020 28208LP302020 28208RK102020 28208LK102020 28208RP302525 28208LP302525 28208RK102525 28208LK102525

10,624 10,624 10,624 10,624 14,720 14,720 14,720 14,720 20,033 20,033 20,033 20,033

Off Set face Turning Brazed Tools

€

Utensile piegato per spallamenti

28210

ISO 6 DIN 4980

Dimensione/ Dimension

Forma Shape

Qualità Quality

cod.

cad/each

Dimensione/ Dimension

Forma Shape

Qualità Quality

cod.

cad/each

8X8 x 80 8X8 x 80 8X8 x 80 8X8 x 80 10X10 x 90 10X10 x 90 10X10 x 90 10X10 x 90 12X12 x 100 12X12 x 100 12X12 x 100 12X12 x 100 16X16 x 110 16X16 x 110

R L R L R L R L R L R L R L

P30 P30 K10 K10 P30 P30 K10 K10 P30 P30 K10 K10 P30 P30

28210RP300808 28210LP300808 28210RK100808 28210LK100808 28210RP301010 28210LP301010 28210RK101010 28210LK101010 28210RP301212 28210LP301212 28210RK101212 28210LK101212 28210RP301616 28210LP301616

4,032 4,032 4,032 4,032 4,608 4,608 4,608 4,608 5,824 5,824 5,824 5,824 9,408 9,408

16X16 x 110 16X16 x 110 20X20 x 125 20X20 x 125 20X20 x 125 20X20 x 125 25X25 x 140 25X25 x 140 25X25 x 140 25X25 x 140 32X32 x 170 32X32 x 170 32X32 x 170 32X32 x 170

R L R L R L R L R L R L R L

K10 K10 P30 P30 K10 K10 P30 P30 K10 K10 P30 P30 K10 K10

28210RK101616 28210LK101616 28210RP302020 28210LP302020 28210RK102020 28210LK102020 28210RP302525 28210LP302525 28210RK102525 28210LK102525 28210RP303232 28210LP303232 28210RK103232 28210LK103232

9,408 9,408 11,456 11,456 11,456 11,456 16,500 16,500 16,500 16,500 30,401 30,401 30,401 30,401

442

Off Set Side Turning Brazed Tools

€

UTENSILI DA TORNIO SALDOBRASATI CON PLACCHETTA IN METALLO DURO Carbide brazed tools

Utensile per troncatura

28212

ISO 7 DIN 4981

Dimensione/ Dimension

Forma Shape

Qualità Quality

cod.

cad/each

Dimensione/ Dimension

Forma Shape

Qualità Quality

cod.

cad/each

6x10 x 90 6x10 x 90 6x10 x 90 6x10 x 90 8x12 x 100 8x12 x 100 8x12 x 100 8x12 x 100 10X16 x 110 10X16 x 110 10X16 x 110 10X16 x 110

R L R L R L R L R L R L

P30 P30 K10 K10 P30 P30 K10 K10 P30 P30 K10 K10

28212RP300610 28212LP300610 28212RK100610 28212LK100610 28212RP300812 28212LP300812 28212RK100812 28212LK100812 28212RP301016 28212LP301016 28212RK101016 28212LK101016

5,952 5,952 5,952 5,952 6,272 6,272 6,272 6,272 8,704 8,704 8,704 8,704

12X20 x 125 12X20 x 125 12X20 x 125 12X20 x 125 16X25 x 140 16X25 x 140 16X25 x 140 16X25 x 140 20X32 x 170 20X32 x 170 20X32 x 170 20X32 x 170

R L R L R L R L R L R L

P30 P30 K10 K10 P30 P30 K10 K10 P30 P30 K10 K10

28212RP301220 28212LP301220 28212RK101220 28212LK101220 28212RP301625 28212LP301625 28212RK101625 28212LK101625 28212RP302032 28212LP302032 28212RK102032 28212LK102032

9,985 9,985 9,985 9,985 16,897 16,897 16,897 16,897 29,121 29,121 29,121 29,121

Cutting Off Brazed Tools

€

Utensile ad alesare per fori passanti

28214

ISO 8 DIN 4973

Dimensione/ Dimension

Forma Shape

Qualità Quality

cod.

cad/each

Dimensione/ Dimension

Forma Shape

Qualità Quality

cod.

cad/each

8x8 x 125 8x8 x 125 10x10 x 150 10x10 x 150 12X12 x 180 12X12 x 180 16X16 x 210

R R R R R R R

P30 K10 P30 K10 P30 K10 P30

28214RP300808 28214RK100808 28214RP301010 28214RK101010 28214RP301212 28214RK101212 28214RP301616

6,016 6,016 6,976 6,976 8,704 8,704 13,184

16X16 x 210 20X20 x 250 20X20 x 250 25X25 x 300 25X25 x 300 32X32 x 355 32X32 x 355

R R R R R R R

K10 P30 K10 P30 K10 P30 K10

28214RK101616 28214RP302020 28214RK102020 28214RP302525 28214RK102525 28214RP303232 28214RK103232

13,184 18,497 18,497 27,393 27,393 45,953 45,953

Boring Brazed Tools

€

Utensile ad alesare per fori ciechi

28216

ISO 9 DIN 4974

Dimensione/ Dimension

Forma Shape

Qualità Quality

cod.

cad/each

Dimensione/ Dimension

Forma Shape

Qualità Quality

cod.

cad/each

8x8 x 125 8x8 x 125 10x10 x 150 10x10 x 150 12X12 x 180 12X12 x 180 16X16 x 210

R R R R R R R

P30 K10 P30 K10 P30 K10 P30

28216RP300808 28216RK100808 28216RP301010 28216RK101010 28216RP301212 28216RK101212 28216RP301616

6,016 6,016 6,976 6,976 8,704 8,704 13,184

16X16 x 210 20X20 x 250 20X20 x 250 25X25 x 300 25X25 x 300 32X32 x 355 32X32 x 355

R R R R R R R

K10 P30 K10 P30 K10 P30 K10

28216RK101616 28216RP302020 28216RK102020 28216RP302525 28216RK102525 28216RP303232 28216RK103232

13,184 18,497 18,497 27,393 27,393 45,953 45,953

Internal Side Turning Brazed Tools

€

443

UTENSILI DA TORNIO SALDOBRASATI CON PLACCHETTA IN METALLO DURO Carbide brazed tools

Utensile diritto per finitura

28218

ISO 10

Dimensione/ Dimension

Forma Shape

Qualità Quality

cod.

cad/each

8x8 x 80 10x10 x 90 12x12 x 100 16x16 x 110

R R R R

P30 P30 P30 P30

28218RP300808 28218RP301010 28218RP301212 28218RP301616

5,184 5,888 9,664 11,136

DIN 4975

Finishing Brazed Tools

€

Dimensione/ Dimension

Forma Shape

Qualità Quality

cod.

cad/each

€

10x16 x 110 12x20 x 125 16X25 x 140

R R R

P30 P30 P30

28218RP301016 28218RP301220 28218RP301625

8,704 9,985 15,744

Utensile per canalini interni

28220

ISO 11 DIN 263

Dimensione/ Dimension

Forma Shape

Qualità Quality

cod.

cad/each

Dimensione/ Dimension

Forma Shape

Qualità Quality

cod.

cad/each

8x8 x 125 10x10 x 140 12x12 x 160

R R R

P30 P30 P30

28220RP300808 28220RP301010 28220RP301212

6,720 7,168 9,024

16x16 x 180 20X20 x 210 25X25 x 250

R R R

P30 P30 P30

28220RP301616 28220RP302020 28220RP302525

14,400 17,664 27,904

Internal Undercutting Brazed Tools

€

Utensile per filettatura esterna a 60°

28224

ISO 12 DIN 282

Dimensione/ Dimension

Forma Shape

Qualità Quality

cod.

cad/each

Dimensione/ Dimension

Forma Shape

Qualità Quality

cod.

cad/each

8x8 x 80 10x10 x90 12x12 x 100

R R R

P30 P30 P30

28224RP300808 28224RP301010 28224RP301212

4,864 5,184 6,976

16x16 x 110 20X20 x 125 25X25 x 140

R R R

P30 P30 P30

28224RP301616 28224RP302020 28224RP302525

11,009 12,352 15,808

External Threading Brazed Tools

€

Utensile per filettatura interna a 60°

28226

ISO 13 DIN 283

Dimensione/ Dimension

Forma Shape

Qualità Quality

cod.

cad/each

Dimensione/ Dimension

Forma Shape

Qualità Quality

cod.

cad/each

8x8 x 120 10x10 x 140 12x12 x 160

R R R

P30 P30 P30

28226RP300808 28226RP301010 28226RP301212

5,952 6,464 8,512

16x16 x 180 20X20 x 210 25X25 x 250

R R R

P30 P30 P30

28226RP301616 28226RP302020 28226RP302525

12,992 16,577 25,921

444

Internal Side Turning

€

BARRETTE TRATTATE E RETTIFICATE IN HSS-CO 1 HSS-CO 10% tool bits

26150

Quadra

HSS-CO 10% DIN 4964/B

Square

8° A L

26152

AxA h14

L mm

cod.

cad/each

€

6x6 6x6 8x8 8x8 10 x 10 10 x 10 12 x 12 12 x 12 14 x 14

160 200 160 200 160 200 160 200 160

261500606160 261500606200 261500808160 261500808200 261501010160 261501010200 261501212160 261501212200 261501414160

18,320 22,776 25,986 33,131 45,100 57,851 58,620 75,206 69,586

AxA h14

L mm

cod.

cad/each

€

14 x 14 16 x 16 16 x 16 18 x 18 18 x 18 20 x 20 20 x 20 30 x 30

200 160 200 160 200 160 200 200

261501414200 261501616160 261501616200 261501818160 261501818200 261502020160 261502020200 261503030200

83,875 94,578 122,860 115,480 144,789 146,850 186,577 422,008

Tonda

HSS-CO 10% DIN 4964/A

Round

Ø L

26154

Ø h14

L mm

cod.

cad/each

€

4,0 5,0 6,0 6,0 6,0 8,0 8,0 8,0 10,0 10,0 10,0

100 100 100 160 200 100 160 200 100 160 200

2615204100 2615205100 2615206100 2615206160 2615206200 2615208100 2615208160 2615208200 2615210100 2615210160 2615210200

8,555 9,154 9,909 14,368 17,328 14,003 22,453 25,477 21,395 40,014 49,455

Ø h14

L mm

cod.

cad/each

€

12 12 14 14 15 16 16 18 20 20

160 200 160 200 200 160 200 200 160 200

2615212160 2615212200 2615214160 2615214200 2615215200 2615216160 2615216200 2615218200 2615220160 2615220200

51,488 63,965 61,957 89,193 89,193 61,957 89,193 162,978 138,675 174,724

Rettangolare

HSS-CO 10% DIN 4964/D

Rectangular

A B

Confezione Packaging

AxB h14

L mm

cod.

cad/each

€

AxB h14

L mm

cod.

cad/each

€

10 x 4 10 x 5 12 x 6 12 x 8 15 x 4 16 x 4 16 x 4

160 200 200 200 200 160 200

261541004160 261541005200 261541206200 261541208200 261541504200 261541604160 261541604200

30,014 34,670 43,836 54,096 44,865 37,460 45,543

16 x 10 20 x 4 20 x 5 20 x 6 20 x 8 20 x 10 20 x 12

200 200 200 200 200 200 200

261541610200 261542004200 261542005200 261542006200 261542008200 261542010200 261542012200

84,893 63,457 63,457 70,823 82,924 95,075 105,010

445

446

FRESE ROTATIVE ROTARY BURRS

447

FRESE ROTATIVE IN METALLO DURO Carbide rotary burrs

Un taglio per ogni applicazione A cut for each application TAGLIO 1 CUT 1

TAGLIO ALLUMINIO adatto a alluminio, magnesio, plastiche e gomma dura. Buon rendimento con un alto tasso di asportazione del materiale, che previene l’incollaggio dei trucioli. ALUMINIUM CUT suitable for cutting into aluminium, magnesium, plastic and hard rubber. igh efficiency with good removal rate, thus preventing the chips clogging the tool.

TAGLIO 3 CUT 3

TAGLIO STANDARD per acciaio, acciaio temprato, ghisa, cordoni di saldatura, materiali metallici in genere. Buon grado di finitura con ottimi rendimenti. Velocità consigliata: 450÷600 m/min. STANDARD CUT Standard cut in low and high tensile steel, welded points, metals. Cutting speed: 450÷600 m/min

TAGLIO 3 PLUS CUT 3 PLUS

TAGLIO STANDARD CON ROMPITRUCIOLO per acciaio, acciaio temprato, ghisa, cordoni di saldatura, materiali metallici in genere. Buon grado di finitura con ottimi rendimenti. elocit consigliata: 450 600 m/min. STANDARD CUT WITH CHIP BREAKER in low and high tensile steel, welded points, metals. Cutting speed: 450÷600 m/min.

TAGLIO 4 CUT 4

TAGLIO INCROCIATO per acciaio trattato, acciaio inox, materiali metallici in genere. ibrazioni ridotte, buona finitura superficiale, ottimi rendimenti. Velocità consigliata: 450÷600 m/min. DIAMOND CUT finish work in high alloy steel, stainless steel, metals, less vibrations, high performances. Cutting speed: 450 600 m/min.

METALLO DURO

Realizzate in metallo duro, sono ideali per lavorazioni anche intensive di finitura e la sgrossatura su acciaio, acciaio temprato, acciaio inox, ghisa, cordoni di saldatura e materiali metallici in generale.

CARBIDE

Made by carbide, they are ideal for even intensive finishing and roughing operations on steel, hardened steel, stainless steel, cast iron, weld seams and metallic materials in general.

448

FRESE ROTATIVE IN METALLO DURO Carbide rotary burrs

Una forma per ogni applicazione A shape for each application FORMA CILINDRICA ZYA

FORMA CILINDRICA CON TESA A SFERA WRC

FORMA CILINDRICA CON TAGLIENTE FRONTALE ZYAS

FORMA A CONO CON PUNTA ARROTONDATA KEL

FORMA A CONO APPUNTITO SKM

FORMA AD ALBERO RBF

FORMA A OGIVA SPG

FORMA A GOCCIA TRE

Cylindrical shape ZYA without end cut

Cylindrical shape ZYAS with end cut

Conical pointed shape SKM

Pointed tree shape SPG

Cylindrical shape with radius end WRC

Conical shape with radius end KEL

Tree shape with radius end RBF

Oval shape TRE

FORMA A SFERA KUD Ball shape KUD

449

FRESE ROTATIVE IN METALLO DURO K20 Carbide rotary burrs

FORMA CILINDRICA ZYA SENZA TAGLIO FRONTALE

Cylindrical shape ZYA without end cut

Confezione

Packaging

Ø l L

Taglio 1 Cut 1 Gambo Shank *Ø3 mm

SERIE LUNGA LONG SERIE

Ø6 mm

Taglio 3 plus Cut 3 plus

Taglio 4 Cut 4

Taglio 3 Cut 3

Taglio 4 Cut 4

TiAlN

16 38

cod. € cad/each

2601500103 10,429

2601600103 12,968

2602000103 10,429

2603300103 23,391

2603400103 23,391

14 50

cod. € cad/each

2601500104 29,478

2601600104 29,478

2602000104 29,478

2603300104 41,392

2603400104 41,392

18 50

cod. € cad/each

2601500106 29,478

2601600106 29,478

2602000106 29,478

2603300106 41,392

2603400106 41,392

18 63

cod. € cad/each

2601500108 29,478

2601600108 29,478

2602000108 29,478

2603300108 41,952

2603400108 41,952

10 20 65

cod. € cad/each

2601500110 36,456

2601600110 36,456

2602000110 36,456

2603300110 51,216

2603400110 51,216

12 25 70

cod. € cad/each

2601500112 46,128

2601600112 46,128

2602000112 46,128

2603300112 62,768

2603400112 62,768

16 25 70

cod. € cad/each

2601500116 68,438

2601600116 68,438

2602000116 68,438

2603300116 97,375

2603400116 97,375

cod. € cad/each

* Microfrese Micro rotary files

450

Taglio 3 Cut 3

FRESE ROTATIVE IN METALLO DURO K20 Carbide rotary burrs

FORMA CILINDRICA ZYAS CON TAGLIO FRONTALE

Cylindrical shape ZYAS with end cut

Confezione

Packaging

Ø l L

Taglio 1 Cut 1 Gambo Shank *Ø3 mm

SERIE LUNGA LONG SERIE

Ø6 mm

Taglio 3 Cut 3

Taglio 3 plus Cut 3 plus

Taglio 4 Cut 4

Taglio 3 Cut 3

Taglio 4 Cut 4

TiAlN

16 38

cod. € cad/each

2601500203 10,429

2601600203 12,968

2602000203 10,429

2603300203 23,391

2603400203 23,391

14 50

cod. € cad/each

2601500204 29,478

2601600204 29,478

2602000204 29,478

2603300204 41,392

2603400204 41,392

18 50

cod. € cad/each

2602500206 24,820

2601500206 29,478

2601600206 29,478

2602000206 29,478

2603300206 41,392

2603400206 41,392

18 63

cod. € cad/each

2602500208 26,593

2601500208 29,478

2601600208 29,478

2602000208 29,478

2603300208 41,952

2603400208 41,952

10 20 65

cod. € cad/each

2602500210 34,577

2601500210 36,456

2601600210 36,456

2602000210 36,456

2603300210 51,216

2603400210 51,216

12 25 70

cod. € cad/each

2602500212 44,325

2601500212 46,128

2601600212 46,128

2602000212 46,128

2603300212 62,768

2603400212 62,768

16 25 70

cod. € cad/each

2602500216 63,838

2601500216 68,438

2601600216 68,438

2602000216 68,438

2603300216 97,375

2603400216 97,375

18 120 6

cod. € cad/each

2602600208 35,045

2602700208 35,045

2602800208 33,377

12 25 120 6

cod. € cad/each

2602600212 51,734

2602700212 51,734

2602800212 50,066

* Microfrese Micro rotary files

451

FRESE ROTATIVE IN METALLO DURO K20 Carbide rotary burrs

FORMA A CONO APPUNTITO SKM

Conical pointed shape SKM

Confezione

Packaging

Ø l L

Taglio 1 Cut 1 Gambo Shank *Ø3 mm

SERIE LUNGA LONG SERIE

Ø6 mm

Taglio 3 plus Cut 3 plus

Taglio 4 Cut 4

Taglio 3 Cut 3

Taglio 4 Cut 4

TiAlN

16 38

cod. € cad/each

2601500303 10,429

2601600303 12,968

2602000303 10,429

2603300303 23,391

2603400303 23,391

14 50

cod. € cad/each

2601500304 29,478

2601600304 29,478

2602000304 29,478

2603300304 41,392

2603400304 41,392

18 50

cod. € cad/each

2602500306 24,820

2601500306 29,478

2601600306 29,478

2602000306 29,478

2603300306 41,392

2603400306 41,392

18 63

cod. € cad/each

2602500308 26,593

2601500308 29,478

2601600308 29,478

2602000308 29,478

2603300308 41,952

2603400308 41,952

10 20 65

cod. € cad/each

2602500310 34,577

2601500310 36,456

2601600310 36,456

2602000310 36,456

2603300310 51,216

2603400310 51,216

12 25 70

cod. € cad/each

2602500312 44,325

2601500312 46,128

2601600312 46,128

2602000312 46,128

2603300312 62,768

2603400312 62,768

16 25 70

cod. € cad/each

2602500316 63,838

2601500316 68,438

2601600316 68,438

2602000316 68,438

2603300316 97,375

2603400316 97,375

18 120 6

cod. € cad/each

2602600308 35,045

2602700308 35,045

2602800308 33,377

12 25 120 6

cod. € cad/each

2602600312 51,734

2602700312 51,734

2602800312 50,066

* Microfrese Micro rotary files

452

Taglio 3 Cut 3

FRESE ROTATIVE IN METALLO DURO K20 Carbide rotary burrs

FORMA AD OGIVA SPG

Pointed tree shape SPG

Confezione

Packaging

Ø l L

Taglio 1 Cut 1 Gambo Shank *Ø3 mm

SERIE LUNGA LONG SERIE

Ø6 mm

Taglio 3 Cut 3

Taglio 3 plus Cut 3 plus

Taglio 4 Cut 4

Taglio 3 Cut 3

Taglio 4 Cut 4

TiAlN

16 38

cod. € cad/each

2601500403 10,429

2601600403 12,968

2602000403 10,429

2603300403 23,391

2603400403 23,391

14 50

cod. € cad/each

2601500404 29,478

2601600404 29,478

2602000404 29,478

2603300404 41,392

2603400404 41,392

18 50

cod. € cad/each

2602500406 24,820

2601500406 29,478

2601600406 29,478

2602000406 29,478

2603300406 41,392

2603400406 41,392

18 63

cod. € cad/each

2602500408 26,593

2601500408 29,478

2601600408 29,478

2602000408 29,478

2603300408 41,952

2603400408 41,952

10 20 65

cod. € cad/each

2602500410 34,577

2601500410 36,456

2601600410 36,456

2602000410 36,456

2603300410 51,216

2603400410 51,216

12 25 70

cod. € cad/each

2602500412 44,325

2601500412 46,128

2601600412 46,128

2602000412 46,128

2603300412 62,768

2603400412 62,768

16 25 70

cod. € cad/each

2602500416 63,838

2601500416 68,438

2601600416 68,438

2602000416 68,438

2603300416 97,375

2603400416 97,375

18 120 6

cod. € cad/each

2602600408 35,045

2602700408 35,045

2602800408 33,377

12 25 120 6

cod. € cad/each

2602600412 51,734

2602700412 51,734

2602800412 50,066

* Microfrese Micro rotary files

453

FRESE ROTATIVE IN METALLO DURO K20 Carbide rotary burrs

FORMA A SFERA KUD

Ball shape KUD

Confezione

Packaging

Ø l L

Taglio 1 Cut 1 Gambo Shank *Ø3 mm

SERIE LUNGA LONG SERIE

Ø6 mm

Taglio 3 plus Cut 3 plus

Taglio 4 Cut 4

Taglio 3 Cut 3

Taglio 4 Cut 4

TiAlN

cod. € cad/each

2601500503 10,429

2601600503 12,968

2602000503 10,429

2603300503 23,391

2603400503 23,391

cod. € cad/each

2601500504 29,478

2601600504 29,478

2602000504 29,478

2603300504 41,392

2603400504 41,392

cod. € cad/each

2602500506 24,820

2601500506 29,478

2601600506 29,478

2602000506 29,478

2603300506 41,392

2603400506 41,392

cod. € cad/each

2602500508 26,593

2601500508 29,478

2601600508 29,478

2602000508 29,478

2603300508 41,952

2603400508 41,952

cod. € cad/each

2602500510 34,577

2601500510 36,456

2601600510 36,456

2602000510 36,456

2603300510 51,216

2603400510 51,216

12 10 70

cod. € cad/each

2602500512 44,325

2601500512 46,128

2601600512 46,128

2602000512 46,128

2603300512 62,768

2603400512 62,768

16 14 70

cod. € cad/each

2602500516 63,838

2601500516 68,438

2601600516 68,438

2602000516 68,438

2603300516 97,375

2603400516 97,375

7 120 6

cod. € cad/each

2602600508 35,045

2602700508 35,045

2602800508 33,377

12 10 120 6

cod. € cad/each

2602600512 51,734

2602700512 51,734

2602800512 50,066

* Microfrese Micro rotary files

454

Taglio 3 Cut 3

FRESE ROTATIVE IN METALLO DURO K20 Carbide rotary burrs

FORMA CLINDRICA CON TESTA A SFERA WRC

Cylindrical shape with radius end WRC

Confezione

Packaging

Ø l L

Taglio 1 Cut 1 Gambo Shank *Ø3 mm

SERIE LUNGA LONG SERIE

Ø6 mm

Taglio 3 Cut 3

Taglio 3 plus Cut 3 plus

Taglio 4 Cut 4

Taglio 3 Cut 3

Taglio 4 Cut 4

TiAlN

16 38

cod. € cad/each

2601500603 10,429

2601600603 12,968

2602000603 10,429

2603300603 23,391

2603400603 23,391

14 50

cod. € cad/each

2601500604 29,478

2601600604 29,478

2602000604 29,478

2603300604 41,392

2603400604 41,392

18 50

cod. € cad/each

2602500606 24,820

2601500606 29,478

2601600606 29,478

2602000606 29,478

2603300606 41,392

2603400606 41,392

18 63

cod. € cad/each

2602500608 26,593

2601500608 29,478

2601600608 29,478

2602000608 29,478

2603300608 41,952

2603400608 41,952

10 20 65

cod. € cad/each

2602500610 34,577

2601500610 36,456

2601600610 36,456

2602000610 36,456

2603300610 51,216

2603400610 51,216

12 25 70

cod. € cad/each

2602500612 44,325

2601500612 46,128

2601600612 46,128

2602000612 46,128

2603300612 62,768

2603400612 62,768

16 25 70

cod. € cad/each

2602500616 63,838

2601500616 68,438

2601600616 68,438

2602000616 68,438

2603300616 97,375

2603400616 97,375

18 120 6

cod. € cad/each

2602600608 35,045

2602700608 35,045

2602800608 33,377

12 25 120 6

cod. € cad/each

2602600612 51,734

2602700612 51,734

2602800612 50,066

* Microfrese Micro rotary files

455

FRESE ROTATIVE IN METALLO DURO K20 Carbide rotary burrs

FORMA A CONO CON PUNTA ARROTONDATA KEL

Conical shape with radius end KEL

Confezione

Packaging

Ø l L

Taglio 1 Cut 1 Gambo Shank *Ø3 mm

SERIE LUNGA LONG SERIE

Ø6 mm

Taglio 3 plus Cut 3 plus

Taglio 4 Cut 4

Taglio 3 Cut 3

Taglio 4 Cut 4

TiAlN

16 38

cod. € cad/each

2601500703 10,429

2601600703 12,968

2602000703 10,429

2603300703 23,391

2603400703 23,391

14 50

cod. € cad/each

2601500704 29,478

2601600704 29,478

2602000704 29,478

2603300704 41,392

2603400704 41,392

18 50

cod. € cad/each

2601500706 29,478

2601600706 29,478

2602000706 29,478

2603300706 41,392

2603400706 41,392

18 63

cod. € cad/each

2601500708 29,478

2601600708 29,478

2602000708 29,478

2603300708 41,952

2603400708 41,952

10 20 65

cod. € cad/each

2601500710 36,456

2601600710 36,456

2602000710 36,456

2603300710 51,216

2603400710 51,216

12 25 70

cod. € cad/each

2601500712 46,128

2601600712 46,128

2602000712 46,128

2603300712 62,768

2603400712 62,768

16 25 70

cod. € cad/each

2601500716 68,438

2601600716 68,438

2602000716 68,438

2603300716 97,375

2603400716 97,375

cod. € cad/each

* Microfrese Micro rotary files

456

Taglio 3 Cut 3

FRESE ROTATIVE IN METALLO DURO K20 Carbide rotary burrs

FORMA AD ALBERO RBF

Tree shape with radius end RBF

Confezione Packaging

d l L

Taglio 1 Cut 1 Gambo Shank *Ø3 mm

SERIE LUNGA LONG SERIE

Ø6 mm

Taglio 3 Cut 3

Taglio 3 plus Cut 3 plus

Taglio 4 Cut 4

Taglio 3 Cut 3

Taglio 4 Cut 4

TiAlN

16 38

cod. € cad/each

2601500803 10,429

2601600803 12,968

2602000803 10,429

2603300803 23,391

2603400803 23,391

14 50

cod. € cad/each

2601500804 29,478

2601600804 29,478

2602000804 29,478

2603300804 41,392

2603400804 41,392

18 50

cod. € cad/each

2601500806 29,478

2601600806 29,478

2602000806 29,478

2603300806 41,392

2603400806 41,392

18 63

cod. € cad/each

2601500808 29,478

2601600808 29,478

2602000808 29,478

2603300808 41,952

2603400808 41,952

10 20 65

cod. € cad/each

2601500810 36,456

2601600810 36,456

2602000810 36,456

2603300810 51,216

2603400810 51,216

12 25 70

cod. € cad/each

2601500812 46,128

2601600812 46,128

2602000812 46,128

2603300812 62,768

2603400812 62,768

16 25 70

cod. € cad/each

2601500816 68,438

2601600816 68,438

2602000816 68,438

2603300816 97,375

2603400816 97,375

cod. € cad/each

* Microfrese Micro rotary files

457

FRESE ROTATIVE IN METALLO DURO K20 Carbide rotary burrs

FORMA A GOCCIA TRE

Oval shape TRE

Confezione

Packaging

Ø l L

Taglio 1 Cut 1 Gambo Shank *Ø3 mm

SERIE LUNGA LONG SERIE

Ø6 mm

Taglio 3 plus Cut 3 plus

Taglio 4 Cut 4

Taglio 3 Cut 3

Taglio 4 Cut 4

TiAlN

cod. € cad/each

2601500903 10,429

2601600903 12,968

2602000903 10,429

2603300903 23,391

2603400903 23,391

cod. € cad/each

2601500904 29,478

2601600904 29,478

2602000904 29,478

2603300904 41,392

2603400904 41,392

10 50

cod. € cad/each

2601500906 29,478

2601600906 29,478

2602000906 29,478

2603300906 41,392

2603400906 41,392

13 58

cod. € cad/each

2601500908 29,478

2601600908 29,478

2602000908 29,478

2603300908 41,952

2603400908 41,952

10 16 61

cod. € cad/each

2601500910 36,456

2601600910 36,456

2602000910 36,456

2603300910 51,216

2603400910 51,216

12 20 65

cod. € cad/each

2601500912 46,128

2601600912 46,128

2602000912 46,128

2603300912 62,768

2603400912 62,768

16 25 70

cod. € cad/each

2601500916 68,438

2601600916 68,438

2602000916 68,438

2603300916 97,375

2603400916 97,375

cod. € cad/each

* Microfrese Micro rotary files

458

Taglio 3 Cut 3

ASSORTIMENTI FRESE ROTATIVE IN METALLO DURO Carbide rotary burrs sets

Taglio 1 Cut 1

10 (5+5)

Taglio 3 e 4 Cut 3 and 4

Taglio 4 Cut 4

Taglio 3 e 4 Cut 3 and 4

TiAlN

Forme Shapes

cod. 26030430

26030416

26030404

26030412

156,408

143,002

164,569

230,455

cod. 26030431

26030417

26030405

26030413

160,000

210,391

215,833

284,424

cod.

26030401

26030410

€ cad/each

311,567

455,497

cod.

26030402

26030411

€ cad/each

393,551

557,982

26030415

26030403

250,000

308,702

322,831

cod.

26030502

26030504

€ cad/each

1.889,815

2.652,319

€ cad/each

cod. 26030432 € cad/each

6 8 10 12 16

Taglio 4 Cut 4

tutte le forme all shapes

ASSORTIMENTI SETS

N° pezzi N° pieces

Taglio 3 plus Cut 3 plus

459

FRESE ROTATIVE IN HSS HSS rotary burrs

HSS Confezione

Packaging

l L

Z2 TAGLIO BASTARDO per leghe leggere, rame, ottone, bronzo, acciaio dolce.

Z3 Taglio mezzo dolce per acciai, ghisa. Vt 80÷220 m/min.

Velocità consigliata: 220÷250 m/min.

For cutting steel, cast iron. Cutting speed 80÷220 m/min.

For cutting light alloys, copper, brass, bronze, mild steel. Cutting speed: 220÷250 m/min.

26001

HRC 63

26003

Z2 €

Z3 €

cod.

cad/each

cod.

cad/each

Cilindrica con taglio frontale

6 8 10 12 15

20 30 30 30 30

60 70 70 70 70

6 6 6 6 6

2600100106 2600100108 2600100110 2600100112 2600100115

11,004 13,964 17,342 19,296 25,099

2600300106 2600300108 2600300110 2600300112 2600300115

12,882 15,385 19,989 21,172 26,584

Cilindrica con testa sferica

6 8 10 12 15

20 30 30 30 30

60 70 70 70 70

6 6 6 6 6

2600100206 2600100208 2600100210 2600100212 2600100215

11,004 13,964 17,342 19,296 25,099

2600300206 2600300208 2600300210 2600300212 2600300215

12,882 15,385 19,989 21,172 26,584

Conica a punta

6 8 10 12 15

20 30 30 30 30

60 70 70 70 70

6 6 6 6 6

2600100306 2600100308 2600100310 2600100312 2600100315

11,004 13,964 17,342 19,296 25,099

2600300306 2600300308 2600300310 2600300312 2600300315

12,882 15,385 19,989 21,172 26,584

Ogiva a punta

6 8 10 12 15

20 30 30 30 30

60 70 70 70 70

6 6 6 6 6

2600100406 2600100408 2600100410 2600100412 2600100415

11,004 13,964 17,342 19,296 25,099

2600300406 2600300408 2600300410 2600300412 2600300415

12,882 15,385 19,989 21,172 26,584

Sferica

6 8 10 12 15

5 7 9 10 14

50 52 54 55 59

6 6 6 6 6

2600100506 2600100508 2600100510 2600100512 2600100515

11,004 13,964 17,342 19,296 25,099

2600300506 2600300508 2600300510 2600300512 2600300515

12,882 15,385 19,989 21,172 26,584

Cylindrical shape with end cut

Cylindrical shape with radius end

Pointed tree shape

Tree shape

Ball shape

Applicazioni Applications

Art. 26004 Self Disponibile su richiesta On demand

460

Acciaio Steel

Alluminio Aluminum Alu

Cu Zn Ni Ms

Leghe leggere Light alloys

ASSORTIMENTI FRESE ROTATIVE IN HSS HSS rotary burrs stes

6 8 10 12 15

Taglio Z2 e Z3 Cut Z2 and Z3

cod.

26008203

26008201

€ cad/each

91,659

105,766

cod.

26008204

26008200

€ cad/each

101,541

110,003

cod.

26008401

€ cad/each

190,384

cod.

26008402

€ cad/each

204,478

cod.

26008501

€ cad/each

913,600

Forme Shapes

Taglio Z3 Cut Z3

tutte le forme all shapes

ASSORTIMENTI SETS

N° pezzi N° pieces

Taglio Z2 Cut Z2

461

462

LAME DA TAGLIO CUTTING BLADES

463

SEGHE CIRCOLARI IN HSS E HSS-CO PER IL TAGLIO DI ACCIAI E MATERIALI METALLICI

HSS and HSS-CO circular saw blades for cutting steel and metals Troncatrici lente

~UNI 4012

Slow cutting-off machines Confezione Packaging

45 11 N°2 Ø 11x63 mm N°2 Ø 8x45 mm

8 32

27001 Profilati Structurals

s 2/3 s 45°

HSS-G

Profilati Structurals s 2/3 s 45°

1/3 s 45°

BW DIN 1838 t4 cad/each

200 225 250 275 300 315 350

116,339 131,856 148,075 221,400 276,124 314,899 383,154

27011200 27011225 27011250 27011275 27011300 27011315 27011350

144,687 163,731 184,029 274,150 308,414 335,064 430,254

1,8 1,9 2 2,5 2,5 2,5 2,5

32 32 32 32 32 32 32

160 180 200 220 220 240 280

27001200 27001225 27001250 27001275 27001300 27001315 27001350

€

27012

VAPO

€

HSS-CO 5%

VAPO

BW DIN 1838 t5

BW DIN 1838 t5 s d z Ø spessore foro n. denti cod. mm thickness hole n. teeth

cad/each

cod.

cad/each

200 225 250 275 300 315 350

116,339 131,856 148,075 221,400 276,124 314,899 383,154

27012200 27012225 27012250 27012275 27012300 27012315 27012350

144,687 163,731 184,029 274,150 308,414 335,064 430,254

1,8 1,9 2 2,5 2,5 2,5 2,5

32 32 32 32 32 32 32

128 140 160 180 180 200 220

27002200 27002225 27002250 27002275 27002300 27002315 27002350

200 225 250 275 300 315 350

1,8 1,9 2 2,5 2,5 2,5 2,5

32 32 32 32 32 32 32

100 120 128 140 160 160 180

€

27013

VAPO

€

HSS-CO 5%

VAPO

C HZ t6

HZ t6 €

€

cod.

cad/each

cod.

cad/each

27003200 27003225 27003250 27003275 27003300 27003315 27003350

116,339 131,856 148,075 221,400 276,124 314,899 383,154

27013200 27013225 27013250 27013275 27013300 27013315 27013350

144,687 163,731 184,029 274,150 308,414 335,064 430,254

t il passo tra due denti consecutivi espresso in mm. t = is the pitch between two consecutive teeth expressed in mm.

464

VAPO

cod.

C s d z Ø spessore foro n. denti mm thickness hole n. teeth s

HSS-CO 5%

cad/each

27003 HSS-G Pieni Full section

27011

VAPO

BW DIN 1838 t4 s d z Ø spessore foro n. denti mm thickness hole n. teeth cod.

27002 HSS-G Pieni Full section

Fori di trascinamento Drive holes - Trouse guide

SEGHE CIRCOLARI CON DENTI IN METALLO DURO PER ALLUMINIO

Carbide tipped circular blades for Aluminium Speciale per alluminio

27050

special for aluminum

Ø mm

45°

0,3

Dentatura s o atore finitore an nis in t t N 2 Ø 11x63 mm Fori di trascinamento Drive holes

s spessore thickness

3,2 3,2 3,2 3,2 3,2 3,4 3,4 3,4 3,6 3,6 3,8 3,8 3,8 4,0

2,2 2,2 2,4 2,4 2,4 2,8 2,8 2,8 2,8 2,8 3,0 3,0 3,0 3,2

250 250 300 300 300 350 350 350* 400 400* 420 450* 450* 500*

d foro hole

z n. denti n. teeth

spoglia hook angle

cod.

cad/each

32 32 32 32 32 32 32 32 32 32 32 32 32 32

60 80 72 84 96 84 96 108 96 120 108 96 108 120

5 5 5 5 5 5 5 5 5 5 5 5 5 5

270502503260 270502503280 270503003272 270503003284 270503003296 270503503284 270503503296 2705035032108 270504003296 2705040032120 2705042032108 270504503296 2705045032108 2705050032120

138,533 150,881 156,115 167,698 182,765 198,451 216,972 228,674 251,371 293,707 338,688 317,520 343,980 423,360

Incisioni anti rumore * Anti noise notches

Pieni profilati Full section-structurals Seghe adatte per il taglio di profilati e pieni in Alluminio, leghe non ferrose, resine e plastica dura. Il taglio non deve fuoriuscire dal materiale oltre 10-15 mm.

12°

Applicazioni Applications

Alu

Plastica Plastic

Alluminio Aluminum

€

For cutting structurals and solids of Aluminium and light alloys. The circular blade can’t go out the work-piece material further than 10÷15 mm.

SEGA CIRCOLARE UNIVERSALE CON DENTI IN METALLO DURO

Universal carbide tipped circular sawblade Multiuso

27055

Multi-purpose Ø mm 160 160 180 190 230 240 250 250 300 300 305 350 350

s spessore thickness

2,2 2,2 2,2 2,2 2,2 2,2 2,4 2,4 2,4 2,4 2,4 2,5 2,5

1,6 1,6 1,6 1,6 1,6 1,6 2,0 1,8 1,8 1,8 1,8 2,0 2,0

d foro hole

z n. denti n. teeth

spoglia hook angle

cod.

cad/each

20 30 30 30 30 30 20 30 30 30 25,4 30 30

28 28 32 32 40 42 48 48 60 80 80 70 90

0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0°

270551602028 270551603028 270551803032 270551903032 270552303040 270552403042 270552502048 270552503048 270553003060 270553003080 270553052580 270553503070 270553503090

104,737 104,737 120,289 120,289 140,650 144,883 159,290 159,290 180,398 204,801 215,467 252,017 287,179

€

Applicazioni

5°

Applications

Metalli Metals Alu

-5°

12°

Alluminio Aluminum

Legno Wood

Truciolato Chipboard

Sandwich Sandwich

Plastica Plastic

Lama circolare con denti in metallo duro per il taglio a secco di ferro, acciaio dolce, alluminio, leghe leggere, materiali composti (pannelli isolanti, laminati), plastica dura, legno e truciolati. Il taglio non deve fuoriuscire dal materiale oltre 10-15 mm. Ideal for cutting in iron, soft steel, Aluminium, brass, copper, plastics, plexiglass, chipboards, composites. Applications on portable or bench sawing machines. The circular blade can’t go out the work-piece material further than 10÷15 mm.

465

SEGHE CIRCOLARI PER LEGNO CON DENTI IN METALLO DURO PER SEGATRICI PORTATILI

Carbide tipped circular sawblades for wood for portable machines Per segatirci portatili

27060

For portable circular saws Ø mm

Confezione Packaging

s 12°

10°

La sega circolare deve fuoriuscire dal materiale lavorato di una uantit pari all’altezza dei denti. Il numero di denti impegnati nel taglio deve essere di 2 3 alla volta. The overlap of the circular saw blade teeth over the cutting material must be equal to the height of the carbide tip. The number of teeth cutting simulteneously must be 2÷3.

130 140 150 150 150 150 160 160 160 160 170 170 180 180 180 180 190 190 200 210 210 230 230 235 235 240 240

s spessore thickness

2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,8 2,8 2,8 2,8 2,8 2,8 2,8 2,8 2,8

1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8

d foro hole

z n. denti n. teeth

spoglia hook angle

cod.

cad/each

20 20 16 20 16 20 20 30 20 30 30 30 20 30 20 30 20 30 30 30 30 30 30 30 30 30 30

20 20 24 24 40 40 24 24 40 40 24 40 24 24 40 40 24 24 48 24 48 24 48 24 48 24 48

15° 15° 15° 15° 15° 12° 15° 15° 12° 12° 15° 12° 15° 15° 12° 12° 15° 15° 12° 15° 12° 15° 12° 15° 12° 15° 12°

270601302020 270601402020 270601501624 270601502024 270601501640 270601502040 270601602024 270601603024 270601602040 270601603040 270601703024 270601703040 270601802024 270601803024 270601802040 270601803040 270601902024 270601903024 270602003048 270602103024 270602103048 270602303024 270602303048 270602353024 270602353048 270602403024 270602403048

55,625 62,011 64,445 64,445 74,911 74,911 64,445 64,445 77,263 77,263 67,421 80,733 67,421 67,421 80,733 80,733 66,833 66,833 88,542 73,382 90,952 80,203 97,373 80,203 97,373 80,203 97,373

€

Per avere indicazioni circa il numero di denti adatto alla lavorazione, conoscendo il diametro della sega circolare ø e lo spessore del materiale da lavorare L, è possibile utilizzare la seguente formula ø x / L, dove è: 7 nel taglio di legno naturale in direzione parallela alle nervature 9 nel taglio di legno naturale in direzione trasversale alle nervature 11 nel taglio di legno duro in direzione trasversale alle nervature e pannelli compositi. To choose the teeth suitable for processing, if you now the diameter ø of the circular saw blade and the thic ness L of the material to be processed it is possible to use the following formula ø x / L, where is: 7 = natural wood cutting, parallel to the ribs 9 = natural wood cutting, transverse to the ribs 11 = hard wood and composite panels, transverse to the ribs

Applicazioni Applications

Legno Wood

Truciolato Chipboard

Raccomandate per il taglio su macchine portatili di legno, truciolari, laminati, etc… Il taglio non deve fuoriuscire dal materiale oltre 10-15 mm. Universal use in wood and chipboard materials with portable machines.The circular blade can’t go out the work-piece material further than 10÷15 mm.

466

LAME PROFESSIONALI PER LEGNO CON DENTI IN METALLO DURO PER TRONCATRICI E SEGHE DA BANCO Carbide tipped circular sawblades for wood

Per troncatrici e seghe da banco

27070

For mitre and table saws

Ø mm

s 12°

10°

s spessore thickness

3,2 3,2 3,2 3,2 3,2 3,2 3,2 3,2 3,2 3,2 3,2 3,2 3,5 3,5 3,5 3,8 3,8 3,8 4,0

2,2 2,2 2,2 2,2 2,2 2,2 2,2 2,2 2,2 2,2 2,2 2,2 2,5 2,5 2,5 2,8 2,8 2,8 2,8

200 250 250 250 280 280 300 300 300 300 305 305 350 350 350 400 400 400 450

z n. denti n. teeth

spoglia hook angle

cod.

cad/each

30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30

64 40 60 80 64 80 48 60 72 96 72 96 54 72 84 64 80 96 72

10° 10° 10° 10° 10° 10° 12° 12° 10° 10° 10° 10° 12° 12° 10° 12° 12° 10° 12°

270702003064 270702503040 270702503060 270702503080 270702803064 270702803080 270703003048 270703003060 270703003072 270703003096 270703053072 270703053096 270703503054 270703503072 270703503084 270704003064 270704003080 270704003096 270704503072

127,475 127,475 133,908 141,356 144,869 169,579 139,612 143,076 150,199 171,603 166,491 178,422 154,911 174,267 187,458 217,183 228,932 241,045 289,860

€

Ø3

d foro hole

Applicazioni

Ø7

Ø9

Ø 10

Applications

Legno Wood

Truciolato Chipboard

Legno Wood

Truciolato Chipboard

42 46,35 60

N°2 Ø 7x42 mm N°2 Ø 9x46,35 mm N°2 Ø 10x60 mm Fori di trascinamento Drive holes - Trouse guide

Indicate per il taglio sia longitudinale che trasversale nel legno e derivati (agglomerati, stratificati) con seghe circolari a banco e troncatrici. Il taglio non deve fuoriuscire dal materiale oltre 10-15 mm. Crosswise and lengthwise cutting in woods and chipboards for any professional use. The circular blade can’t go out the work-piece material further than 10÷15 mm.

ANELLI DI RIDUZIONE PER TUTTI I TIPI DI LAME CIRCOLARI

Reduction ring for every kind of circular blades

27072

Ø2

Ø1

Anelli in rame Copper rings

€

Ø1/Ø2

pcs.

cod.

cad/each

35 / 30 35 / 25 35 / 20 32 / 30 32 / 25 32 / 20 30 / 25 30 / 20 30 / 18 30 / 16 25 / 20 20 / 16

3 3 3 3 3 3 3 3 3 3 3 3

270723530 270723525 270723520 270723230 270723225 270723220 270723025 270723020 270723018 270723016 270722520 270722016

6,321 6,321 6,321 6,321 6,321 6,321 6,321 6,321 6,321 6,321 6,321 6,321

467

FRESE A DISCO PER CHIAVI Milling cutters for keys

26125 Per macchine duplicatrici di chiavi

FRESE BICONICHE

For key cutting machines:

Prismatic milling cutters 84°

Re ord Re ord plus, Re ord 2000, Special Super, Special Master, Bravo Super, Bravo Master, Bravo Europa, Po er s, Po er Plus, etc.

z n. denti n. teeth

cod.

cad/each

Ø 80x5x16 HSS-CO

110

26125001

152,299

Ø 80x5x16 HSS-CO

120

26125002

173,460

Ø 80x5x16 ASP 30 - CO8%

110

26125003

208,715

Ø 80x5x16 Metallo duro Carbide

26125005

834,446

Dimensioni Sizes Ø 16 Ø 80 5

€

Per macchine duplicatrici di chiavi

FRESE A DISCO A 3 TAGLI

For key cutting machines:

Three cutting milling cutters

Targa Targa 2000 Targa 2000 P Tech 3, Modular I , Serenissima, Opera I , X80, T 40B, T 40 , T 40D, Super Dar, Mini oll , etc.

z n. denti n. teeth

cod.

cad/each

Ø 80x1,5x22 HSS-CO8%

100

26125010

152,299

Ø 80x1,5x22 ASP 30 - CO8%

100

26125012

208,715

Ø 80x1,5x22 Metallo duro Carbide

100

26125015

632,354

Dimensioni Sizes

€

Ø 22 Ø 80 1,5

Per macchine duplicatrici di chiavi

FRESE A DISCO A TAGLIO PERIFERICO

For key cutting machines:

Peripherical milling cutters

Targa Targa 2000 Targa 2000 P Tech 3, Modular I , Serenissima, Opera I , X80, T 40B, T 40 , T 40D, Super Dar, Mini oll , etc.

z n. denti n. teeth

cod.

cad/each

Ø 80x1,5x22 HSS-CO8%

100

26125020

74,748

Ø 80x1,5x22 ASP 30* - CO8%

100

26125022

122,690

Ø 80x1,5x22 Metallo duro Carbide

100

26125025

401,915

Dimensioni Sizes Ø 22 Ø 80 1,5

468

ASP 30 Acciaio superrapido sinterizzato (Metallurgia delle polveri) * Sinterized steel C 1,28% - Cr 4,2% - Mo 5% - W 6,4% - Co 8,5% - V 3,1%

€

LAME A NASTRO BIMETALLICHE AD ALTE PRESTAZIONI - METALLURGIA DELLE POLVERI Bimetal band saw blades - HSS POWDER METAL

Alte prestazioni - HSS PM

25018

High performance special blade - HSS PM s

Dentatura / Teeth ASP Metallurgia delle polveri HRC: 70/71 Strip di supporto / Body HRC: 48/50 (Alto contenuto di cromo / High chrome)

Stradatura Tooth Set

Moduli dentature a passo variabile Variable pitch modules

Triplo truciolo Triple chip

Powder metallurgy HSS made by powder metallurgy has excellent performances: its homogeneous structure assures high toughness and high resistance. The finishing of the tools are really smooth, so the chip can easily be evacuated far from the cutting zone, thus avoiding built-up edge growth.

ariabile Variable

Profilo a dente di produ ione Production tooth Speciale geometria del dente realizzato con acciaio superrapido e metallurgia delle polveri. Ha profilo PR D CTI N T TH e un’ampia gola di scarico L. Special tooth geometry made of high speed steel and powder metallurgy. It has PROD CTION TOOTH profile and a wide L discharge groove.

SP LIA STR MAM NT P SITIVA 12° E TREMELY Positive rake 12° SO LIA +

Dentatura variabile Variable tooth (z - tpi 0,75/1,25 5/8)

tilizzare su segatrici prevalentemente a ciclo di taglio automatico, in tutte le lavorazioni particolarmente gravose dove necessiti una lama che garantisca una elevata, costante e duratura resa prestazionale. Dedicata al taglio di sezioni piene ma anche interrotte (di medio o forte spessore), singole o eventualmente disposte affiancate in acciai con R 1400 N/mm2, acciai da bonifica, acciai per cuscinetti, acciai per stampi, acciai per lavorazioni a freddo e a caldo, acciai inossidabili, acciai inox resistenti al calore (Duplex®, Super Duplex®), titanio, leghe speciali. Use on sawing machines mainly with automatic cutting cycle, in all particularly demanding processes where you need a blade that guarantees a high, constant and long-lasting performance. Dedicated to the cutting of solid or interrupted sections (of medium or strong thickness), single or possibly placed side by side in steels with R < 1400 N/mm2, tempered steels, bearing steels, steels for molds, steels for cold working and hot, stainless steels, heat resistant stainless steels (Duplex®, Super Duplex®), titanium, special alloys.

Dimensioni (Altezza x Spessore) Dimensions (Width x Thickness) mm 27 x 0,90 34 x 1,10 41 x 1,30 54 x 1,60

Passo dentatura (Moduli a passo variabile in Tpi) Toothing pitch (Variable pitches modules in Tpi)

Prezzo (Al metro saldatura compresa) Price (For meter weld included)

1 / 1,4

1,4 / 2

2/3

3/4

4/6

5/8

€

X X X X

X X

X X X

29,759 37,045 51,571 70,099

469

LAME A NASTRO BIMETALLICHE AD ALTE PRESTAZIONI - HSS AISI M42 Bimetal band saw blades - HSS AISI M42

Alte prestazioni

25011

High performance s

Dentatura / Teeth AISI M42 - 8%Co HRC: 68/69 Strip di supporto / Body HRC: 48/50 (Alto contenuto di cromo / High chrome)

Stradatura Tooth Set

Moduli dentature a passo variabile Variable pitch modules

Normale dritta Straight raker set la pi utilizzata most used

ariabile Variable

Moduli dentature a passo costante Constant pitch modules

Profilo a dente cur ilineo Curvilinear tooth Dente curvilineo che garantisce una esecuzione di taglio efficace e lineare, a beneficio di un migliore avanzamento. Curvilinear tooth that guarantees an effective and linear cutting execution to fit a better feed.

Fissa Regular

SP LIA STR MAM NT P SITIVA 12° E TREMELY Positive rake 12° SO LIA +

SO LIA 0

Dentatura costante Regular tooth (z - tpi 2 6)

Dentatura variabile Variable tooth (z - tpi 1/1,4 5/8)3

SP LIA N TRA Standard straight rake

Dentatura variabile Variable tooth (z - tpi 6/10 10/14)

Dentatura costante Regular tooth (z - tpi 10 18)

tilizzare su segatrici a ciclo di taglio (manuale o automatico), in tutti i generi di lavorazioni artigianali ed industriali dove necessiti una elevata resa prestazionale e vita operativa dell’utensile, per il taglio di sezioni piene ed interrotte, singole o disposte a fascio, in acciai fino a 1300 N/mm2, acciai strutturali, acciai automatici, acciai al carbonio, acciai da bonifica, acciai per cuscinetti, acciai per stampi, acciai inossidabili, ghise lamellari e sferoidali, metalli non ferrosi come alluminio e rame, materie plastiche, materiali non metallici in genere. Use on cutting-cycle saws (manual or automatic), in all kinds of artisan and industrial processes where a high performance yield and working life of the tool is required, for cutting full and interrupted sections, single or bundled, in steels up to 1300 N/mm2, structural steels, automatic steels, carbon steels, tempered steels, bearing steels, steels for molds, stainless steels, lamellar and spheroidal cast irons, non-ferrous metals such as aluminum and copper, plastics, non-metallic materials in general.

Dimensioni (Altezza x Spessore) Dimensions (Width x Thickness) mm 6 x 0,65 6 x 0,90 10 x 0,65 10 x 0,90 13 x 0,65 13 x 0,90 20 x 0,90 27 x 0,90 34 x 1,10 41 x 1,30 54 x 1,30 54 x 1,60

470

Passo dentatura (Moduli a passo costante e variabile in Tpi) Toothing pitch (Constant and variable pitches modules in Tpi) 6 10 14 18 1/1,4 1,4/2 2/3 3/4 4/6

X X X

X X X X X X

X X X X X X X

X X X X

X X X X X

X X X X

X X X X X

X X X X X X

Prezzo

(Al metro saldatura compresa)

Price

(For meter weld included)

5/8

X X X X X X

6/10

X X X X X X

8/12 10/14

X X X X X

X X X X X X X X

€ 20,798 20,798 22,085 22,085 22,868 22,868 23,864 29,172 33,728 48,247 57,507 66,600

Bimetal band saw blades - HSS AISI M42 Dente rinforzato

25016

Reinforced tooth

Dentatura / Teeth AISI M42 - 8%Co HRC: 67/69 Strip di supporto / Body HRC: 44/46

Stradatura Tooth Set

Moduli dentature a passo variabile Variable pitch modules

Stradatura maggiorata Extra set

Variabile Variable

Profilo a dente rinforzato Reinforced tooth Dente a profilo rinforzato, per una netta riduzione dei fenomeni di rottura dei denti ed una eccezionale resistenza agli impatti e alle vibrazioni. Tooth with reinforced profile, for a clear reduction of the breaking phenomena of the teeth and an exceptional resistance to impacts and vibrations.

α SOGLIA +

SPOGLIA POSITIVA 7° Positive rake 7° Dentatura variabile Variable tooth (z - tpi 0,75/1,25÷5/8)

tilizzare su segatrici a ciclo di taglio (manuale o automatico), nelle lavorazioni di carpenteria dove U necessiti una lama estremamente resistente e versatile, atta a tagliare le più diverse forme e spessori di materiali. Dedicata prevalentemente al taglio di sezioni interrotte (tubi, profilati, ecc.) ma anche di sezioni piene, singole o disposte a fascio di acciai fino a 1200 N/mm2, acciai strutturali, acciai automatici, acciai al carbonio. Use on cutting machines (manual or automatic), in carpentry work where you need an extremely resistant and versatile blade, able to cut the most different shapes and thicknesses of materials. Dedicated mainly to cutting interrupted sections (pipes, profiles, etc.) but also of solid, single or beam sections of steels up to 1200 N/mm2, structural steels, automatic steels, carbon steels.

Dimensioni (Altezza x Spessore) Dimensions (Width x Thickness) mm 13 x 0,65 13 x 0,90 20 x 0,90 27 x 0,90 34 x 1,10 41 x 1,30

Passo dentatura (Moduli a passo variabile in Tpi) Toothing pitch (Variable pitches modules in Tpi) 2/3

X X X

3/4

X X X

4/6

X X X

5/7

X X X

Prezzo (Al metro saldatura compresa) Price (For meter weld included) 8/11 X X X X

12/16

€ 15,640 15,640 17,268 19,577 26,305 42,165

471

SPECIALE CARPENTERIA CARPENTRY SPECIAL BLADE

LAME A NASTRO BIMETALLICHE PER CARPENTERIA - HSS AISI M42

LAME A NASTRO BIMETALLICHE MULTIUSO - HSS AISI M42 Bimetal band saw blades - HSS AISI M42

Lama multiuso

25010

Multipurpose blade s

Dentatura / Teeth AISI M42 - 8%Co HRC: 67/69 Strip di supporto / Body HRC: 44/46

Stradatura Tooth Set

Moduli dentature a passo variabile Variable pitch modules

Normale dritta Straight raker set la pi utilizzata most used

ariabile Variable

Moduli dentature a passo costante Constant pitch modules

Fissa Regular

SP LIA P SITIVA 8° Positive rake 8° SO LIA +

Dentatura variabile Variable tooth (z - tpi 1,4/2 5/8)

SP LIA N TRA Standard straight rake

0 SO LIA 0

Dentatura costante Regular tooth (z - tpi 2 6)

Dentatura variabile Variable tooth (z - tpi 6/10 14/18)

Dentatura costante Regular tooth (z - tpi 8 18)

tilizzare su segatrici a ciclo di taglio (manuale o automatico), in tutti i generi di lavorazioni artigianali ed industriali, per il taglio di sezioni piene ed interrotte, singole o disposte a fascio, di acciai fino a 1200 N/mm2, acciai strutturali, acciai automatici, acciai al carbonio, ghise lamellari e sferoidali, metalli non ferrosi (alluminio, rame,…) materie plastiche, materiali non metallici in genere. se on cutting-cycle saws (manual or automatic), in all inds of artisanal and industrial processes, for cutting solid and interrupted sections, single or arranged in bundles, of steels up to 1200 N/mm2, structural steels, automatic steels, carbon steels, lamellar and spheroidal cast irons, non-ferrous metals (aluminum, copper,…) plastics, non-metallic materials in general.

Dimensioni (Altezza x Spessore) Dimensions (Width x Thickness) mm 13 x 0,65 13 x 0,90 20 x 0,90 27 x 0,90 34 x 1,10 41 x 1,30

472

X X X X

Passo dentatura (Moduli a passo costante e variabile in Tpi) Toothing pitch (Constant and variable pitches modules in Tpi) 8 10 14 18 1,4/2 2/3 3/4 4/6 5/8 6/10 8/12 10/14 14/18

X X X X

X X X

X X X X

X X X X X X

X X X X X

X X X X

Prezzo

(Al metro saldatura compresa)

Price

(For meter weld included)

€ 15,360 15,360 17,268 18,572 23,091 33,531

LISTINO ANELLI SALDATI PER LE SEGATRICI PIÙ COMUNI

Price list for the most common welded bandsaw blades

25010 Dimensioni Sizes 1138 x 13 x 0,65 1140 x 13 x 0,65 1295 x 13 x 0,65 1300 x 13 x 0,65 1325 x 13 x 0,65 1330 x 13 x 0,65 1335 x 13 x 0,65 1440 x 13 x 0,65 1470 x 13 x 0,65 1638 x 13 x 0,65 1640 x 13 x 0,65 1735 x 13 x 0,65 1735 x 13 x 0,90 1740 x 13 x 0,90 1745 x 13 x 0,90 1750 x 13 x 0,90 1900 x 20 x 0,90 2000 x 20 x 0,90 2060 x 20 x 0,90 2080 x 20 x 0,90 2140 x 20 x 0,90 2160 x 20 x 0,90 2190 x 20 x 0,90 2360 x 20 x 0,90 2375 x 20 x 0,90 2465 x 20 x 0,90 2500 x 20 x 0,90 2525 x 20 x 0,90 2530 x 20 x 0,90 2625 x 20 x 0,90 2650 x 20 x 0,90 2450 x 27 x 0,90 2500 x 27 x 0,90 2520 x 27 x 0,90 2550 x 27 x 0,90 2560 x 27 x 0,90

€ 17,481 17,512 19,892 19,970 20,353 20,430 20,507 22,119 22,580 25,162 25,192 26,652 26,652 26,728 26,805 26,882 32,810 34,536 35,572 35,918 36,954 37,299 37,818 40,753 41,013 42,567 43,172 43,603 43,690 45,330 45,762 45,503 46,432 46,803 47,360 47,546

Dimensioni Sizes 2580 x 27 x 0,90 2590 x 27 x 0,90 2600 x 27 x 0,90 2650 x 27 x 0,90 2700 x 27 x 0,90 2710 x 27 x 0,90 2720 x 27 x 0,90 2750 x 27 x 0,90 2755 x 27 x 0,90 2760 x 27 x 0,90 2765 x 27 x 0,90 2770 x 27 x 0,90 2800 x 27 x 0,90 2825 x 27 x 0,90 2830 x 27 x 0,90 2835 x 27 x 0,90 2840 x 27 x 0,90 2845 x 27 x 0,90 2850 x 27 x 0,90 2880 x 27 x 0,90 2925 x 27 x 0,90 2940 x 27 x 0,90 2945 x 27 x 0,90 2950 x 27 x 0,90 3000 x 27 x 0,90 3010 x 27 x 0,90 3025 x 27 x 0,90 3100 x 27 x 0,90 3120 x 27 x 0,90 3150 x 27 x 0,90 3180 x 27 x 0,90 3200 x 27 x 0,90 3225 x 27 x 0,90 3320 x 27 x 0,90 3370 x 27 x 0,90 3435 x 27 x 0,90

€ 47,917 48,103 48,289 49,217 50,146 50,332 50,518 51,075 51,168 51,260 51,353 51,446 52,003 52,468 52,560 52,653 52,746 52,839 52,932 53,489 54,326 54,603 54,696 54,788 55,718 55,904 56,183 57,575 57,947 58,503 59,061 59,433 59,896 61,662 62,589 63,796

Dimensioni Sizes 3505 x 27 x 0,90 3580 x 27 x 0,90 3660 x 27 x 0,90 3810 x 27 x 0,90 3850 x 27 x 0,90 3900 x 27 x 0,90 3505 x 34 x 1,10 3634 x 34 x 1,10 3660 x 34 x 1,10 4100 x 34 x 1,10 4115 x 34 x 1,10 4120 x 34 x 1,10 4250 x 34 x 1,10 4460 x 34 x 1,10 4500 x 34 x 1,10 4570 x 34 x 1,10 4600 x 34 x 1,10 4860 x 34 x 1,10 4970 x 34 x 1,10 5300 x 34 x 1,10 5400 x 34 x 1,10 5600 x 34 x 1,10 6150 x 34 x 1,10 4550 x 41 x 1,30 4870 x 41 x 1,30 5100 x 41 x 1,30 5250 x 41 x 1,30 5300 x 41 x 1,30 5400 x 41 x 1,30 5450 x 41 x 1,30 5550 x 41 x 1,30 5620 x 41 x 1,30 5800 x 41 x 1,30 6150 x 41 x 1,30 6380 x 41 x 1,30 7400 x 41 x 1,30

€ 65,097 66,490 67,975 70,762 71,504 72,434 80,933 83,913 84,512 94,672 95,019 95,134 98,136 102,985 103,909 105,525 106,217 112,221 114,761 122,381 124,690 129,308 142,008 152,568 163,297 171,009 176,039 177,716 181,069 182,746 186,098 188,446 194,481 206,218 213,930 248,132

INF RMA I N IMP RTANT Main tip All’atto dell’ordine verificare il corretto senso di rotazione desiderato (Standard e/o inverso) in funzione del modello di segatrice When ordering please verify the sense of rotation you need (STANDARD and/or REVERSE) depending on the machine type

Art. 28020005

Art. 28020004

Olio da taglio emulsionabile in tanica 5 g (5lt) Cutting oil tank 5 lt

Olio da taglio minerale intero 0,5 lt Cutting oil 0,5 lt

€ 120,995

€ 37,614

473

130_215.qxp_Layout 1 21/11/19 13:40 Pagina 210

TABELLA PER LA SCELTA DELLA DENTATURA (PER OGNI TIPO DI LAMA) Tooth selection

130_215.qxp_Layout 1 21/11/19 13:40 Pagina 210 L

Tabella per la scelta della dentatura (per ogni tipo di lama) Tooth selection / comment pour choisir la denture / tabla para la elecciòn del paso del diente Dentatura variabile - Variable tooth

piene - Solid section Tooth selection / comment pourSezioni choisir la denture / tabla para la elecciòn del200 paso del diente 20 30 50 cross 80 100 300 D-L (mm.)

D-L

Z-tpi (mm)10/14

D-L (mm.)

8/12

30 50 6/10 5/8 4/6

4/6

Z-tpi D-L (mm.)

costante - Regular 8 Dentatura 10 30 50 10/14 8/12 206/10 5/8 4/6 tooth 4/6 Sezioni piene - Solid cross section

Z-tpi

24 18 814 10 10 830 6 D-L Dentatura costante20- Regular tooth50 (mm)

D-L (mm.) Z-tpi S

24 18 14 10 20

24 18 14 S (mm.)

D S S

<2 3 S (mm) 4 <2 5 S (mm.) 36 <2 48 3 5 10 4 12 6 5 15 8 6 20 10 8 30 12 10 50 15 12 20 15 30 20 50 30 50

300 1,4/2

200

6 80

200 2/3

3/4

500

3/4 2/3

Sezioni piene - Solid cross section

Z-tpi D

100

Dentatura variabile - Variable tooth Z-tpi 6/10 section 5/8 4/6 4/6 Sezioni 10/14 piene -8/12 Solid cross Dentatura costante - Regular tooth 20 30 50 80 100 Sezioni piene - Solid cross section

100 2/3 120 3/4

100

4 D120 (mm.)

100

500

800 0,75/1,25

3 120

120

800

300 1,4/2

400 0,75/1,25 500 800

200 2

300

1,25 500 0,75 400 800

300

2 400

500

3 200

3 D (mm) Z-tpi

0,75/1,25

500

200

100

800

1,4/2

300

804

Sezioni piene -variabile Solid cross section Tabella per la scelta della dentatura (per ogni tipo di lama) Dentatura - Variable tooth

150

20 14 40 14 60 150 10/14 10/14 10/14 80 10/14 100 10/14 120 8/12 10/14 10/14 10/14 10/14 8/12 8/12 D (mm.) Z-tpi 6/10 8/12 8/12 8/12 8/12 8/12 6/10 80 10/14 100 10/14 150 120 10/14 1420 14 40 10/1460 10/14 8/12 8/12 8/12 6/10 6/10 6/10 6/10 Z-tpi 10/14 6/10 8/12 6/10 8/12 5/8 6/10 10/14 6/10 10/14 6/10 10/14 6/10 8/12 14 14 10/14 10/14 10/14 10/14 10/14 8/126/10 8/126/10 8/126/10 8/12 6/10 8/125/8 6/105/8 6/10 5/8 8/12 8/12 10/14 10/14 10/14 10/14 8/12 4/6 8/12 8/12 5/8 8/12 5/8 6/105/8 6/105/8 6/105/8 6/10 6/10 6/10 8/12 8/12 8/12 8/12 8/12 4/6 6/10 6/10 5/8 6/10 5/8 6/105/8 6/104/6 6/104/6 5/8 6/10 6/10 8/12 8/12 8/12 6/10 6/10 3/4 6/10 6/10 4/6 6/10 4/6 6/104/6 5/84/6 5/84/6 5/8 6/10 6/10 6/10 5/8 6/10 6/10 6/10 3/4 5/8 5/8 4/6 5/8 4/6 5/83/4 5/83/4 4/6 5/8 6/10 6/10 6/10 6/10 5/8 5/8 2/3 5/8 5/8 5/8 3/4 4/63/4 4/63/4 4/6 5/8 5/8 5/8 5/8 5/8 4/6 2/3 2/3 3/4 4/65/8 4/65/8 4/65/8 4/6 4/6 4/6 4/6 4/6 4/6 4/6 3/4 3/4 3/4 4/6 4/6 4/6 4/6 3/4 4/6 3/4 3/4 2/3 3/4 3/4 4/6 3/44/6 3/4 2/3 2/3 3/4 3/4 2/3 3/4 2/3 2/3

1,25 800

0,75

200

300

400

500

200 8/12 6/10 6/10 200 8/12 5/8 6/10 5/8 8/12 6/10 4/6 6/10 4/6 5/8 6/10 4/6 5/8 5/8 3/4 4/6 5/8 3/4 4/6 4/6 2/3 4/6 4/6 2/3 3/4 4/6 3/4 3/4 2/3 3/4 2/3 2/3 2/3

300 8/12 6/10 5/8 300 8/12 5/8 6/10 5/8 8/12 5/8 4/6 6/10 4/6 5/8 5/8 4/6 5/8 5/8 3/4 4/6 5/8 3/4 4/6 4/6 2/3 4/6 4/6 2/3 3/4 4/6 3/4 3/4 2/3 3/4 2/3 2/3 2/3

400 8/12 6/10 5/8 400 8/12 5/8 6/10 4/6 8/12 5/8 4/6 6/10 4/6 5/8 5/8 3/4 4/6 5/8 3/4 4/6 4/6 3/4 4/6 4/6 2/3 3/4 4/6 2/3 3/4 3/4 3/4 3/4 2/3 3/4 2/3 2/3 2/3

500 6/10 5/8 4/6 500 6/10 4/6 5/8 4/6 6/10 4/6 4/6 5/8 3/4 4/6 4/6 3/4 4/6 4/6 3/4 4/6 4/6 2/3 3/4 4/6 2/3 3/4 3/4 2/3 3/4 3/4 2/3 3/4 2/3 2/3 2/3 2/3 2/3

1,25

0,75

Parametri di taglio Parametri di taglio Cutting parameters Cutting parameters Materiale da da tagliare Materiale tagliare Material to cut Material to cut

Velocità di rotazione lama Velocità di rotazione lama Band rotation speed Bandsaw saw blade blade rotation m/min. speed m/min.

Ferro comune, Acciai strutturali / Iron,Structural Structuralsteels steels Ferro comune, Acciai strutturali / Iron, Acciai automatici, Acciai al carbonio / Free-machining steels Materiale da tagliare Acciai automatici, Acciai al carbonio / Free-machining steels, steels,Carbon Carbon steels Material to cut A / Heat-treatable steels Acciai da bonifica / Heat-treatable steels Acciai per cuscinetti / Ball bearing steels Acciai per cuscinetti / Ball bearing steels Acciai per molle / Spring steel Ferro comune, Acciai strutturali Acciai per molle / Spring steel / Iron, Structural steels Acciai per stampi / Mould steels Acciai automatici, Acciai al carbonio / Free-machining steels, Carbon steels Acciai perper stampi / Mould steels / Cold-working Acciai lavorazioni a freddo steels Acciai da bonifica / Heat-treatable steels Acciai perper lavorazioni a freddo steels Acciai lavorazioni a caldo//Cold-working Hot-working steels Acciai per / Ball bearing steels Acciai inossidabili earesistenti agli acidi / Stainless Acciai percuscinetti lavorazioni caldo / Hot-working steels and acid-resistant steels Acciai per molle / Spring steel Acciai inossidabili resistenti al calore / Heat-resistant stainless steels (DUPLEX, Acciai inossidabili e resistenti agli acidi / Stainless and acid-resistant steels SUPER DUPLEX...) Leghe speciali/ aMould base disteels Nichel / Nickel-base alloys (HASTELLOY, INCONEL...) Acciai per stampi Acciai inossidabili resistenti al calore / Heat-resistant stainless steels (DUPLEX, SUPER DUPLEX…) Titanio e leghe derivate / Titanium and derivated alloys Acciai lavorazioni freddo / Cold-working Legheper speciali a basea di Nichel / Nickel-base steels alloys (HASTELLOY, INCONEL…) Ghise lamellari e sferoidali / Cast irons lamellar and spheroidal Acciai per lavorazioni a caldo / Hot-working steelsalloys Titanio e leghe derivate / Titanium and derivated Metalli non ferrosi quali Alluminio, Rame... / Non ferrous metals as Aluminium, Copper... Acciai inossidabili e resistenti agli acidi / Stainless acid-resistant steels Ghise lamellari e sferoidali / Cast irons lamellar andand spheroidal Materie plastiche / Plastics Acciai inossidabili resistenti al calore / Heat-resistant stainless steels (DUPLEX, SUPER DUPLEX…) Metalli non ferrosi quali Alluminio, Rame… / Non ferrous metals as Aluminium, Copper…

70 ÷70 90÷ 90 Velocità70 di÷rotazione lama 80÷ 80 70 Band saw 60 blade speed ÷60 70÷rotation m/min.70 55 ÷ 65 55 ÷ 65 45 ÷ 60 70 45÷÷90 60 25 ÷ 40 70 ÷÷80 25 25 ÷ 40 40 ÷÷70 40 25 60 ÷25 40 ÷÷65 30 55 ÷25 40 40 25 45 ÷30 35 ÷÷60 40 15 25 ÷ 25 25÷÷40 35 25 25 ÷ 45 15÷÷40 25 35 ÷ 55 25 ÷ 40 60 ÷ 25 200÷ 45 30 ÷÷40 80 ÷ 35 400 55

Parametri di taglio Cutting parameters

Leghe speciali a base di Nichel / Nickel-base alloys (HASTELLOY, INCONEL…) Materie plastiche / Plastics Titanio e leghe derivate / Titanium and derivated alloys

474

25 60÷÷35 200 15 ÷ 25 80 ÷ 400 25 ÷ 45

Ghise lamellari e sferoidali / Cast irons lamellar and spheroidal

35 ÷ 55

Metalli non ferrosi quali Alluminio, Rame… / Non ferrous metals as Aluminium, Copper…

60 ÷ 200

Materie plastiche / Plastics

80 ÷ 400

~T308B ~T101AO ~T119BO ~T344D ~T234X ~T119BO ~T244D ~T144DP ~T101B ~T144D ~T308BO ~T101B ~T111C ~T308B ~T101AO ~T344DF ~T111C ~T344D ~T234X ~T101BR ~T244D ~T144DP ~T101BR ~T144D ~T308BO ~T101B ~T101BF ~T144D ~T308B ~T344DF ~T119B ~T344D ~T234X ~T119B ~T244D ~T144DP ~T101BR ~T101BRF ~T244D ~T308BO ~T101BF ~T119BO ~T308B ~T344DF ~T119BO ~T344D ~T234X ~T119B ~T101BIF ~T344D ~T144DP ~T111C ~T101BRF ~T308BO ~T101BF ~T111C ~T308B ~T344DF ~T119BO ~T345XF T345XF ~T308B ~T234X ~T101BIF ~T144D ~T144DP ~T101BRF ~T144D ~T308BO ~T111C ~T101BF ~T118G ~T308BO ~T344DF ~T345XF T345XF ~T244D ~T234X ~T101BIF ~T244D 23620100 ~T144DP ~T101BRF ~T144D ~T218A ~T144DP ~T101BF ~T344D ~T118G ~T344DF ~T345XF T345XF ~T344D ~T234X ~T101BIF ~T244D ~T318A ~T234X ~T101BRF ~T308B ~T218A ~T101BF ~T308B ~T118G ~T344DF ~T345XF ~T344D T345XF ~T318B 23620110 ~T344DF ~T101BIF ~T318A ~T308BO ~T101BRF ~T218A ~T308BO ~T101BF ~T308B ~T118G ~T318AF ~T101BF ~T345XF T345XF ~T318B ~T144DP ~T101BIF ~T318A ~T144DP ~T101BRF ~T218A ~T308BO ~T118BF ~T101BRF ~T118G ~T234X 23620115 ~T318AF ~T345XF

Plus• •WOOD WOOD HCS • Pro HCS • Basic • WOOD HCS • Fast • WOOD HCS • Variable Basic • WOOD • WOOD HCS • Fast • WOOD HCS •• Plus Ultra••WOOD WOOD HCS HCS • Fast • WOOD HCS •• Plus Pro • •WOOD HCS WOOD HCS • Basic • WOOD HCS •• Pro Plus• •WOOD WOOD HCS BIM• •Fast • HARD WOOD HCS Basic • WOOD HCS • Fast • WOOD HCS •• Plus Variable • WOOD HCS • WOOD HCS • Fast • WOOD HCS WOOD HCS •• Ultra Plus •• WOOD HCS • Fast • WOOD HCS •• Plus Pro • •WOOD HCS WOOD HCS Fast••HARD WOODWOOD BIM ••Plus HCS • Pro • WOOD ® BIM• Fast • HARD WOOD HCS • Basic • WOOD HCS • Fast • WOOD HCS • WOOD HCS •• Variable Basic • WOOD HCS • Fast • WOOD HCS •• Plus Ultra •• WOOD WOOD HCS HCS Fast••HARD WOODWOOD BIM ••Plus HCS • Pro • WOOD HCS • Basic • WOOD BIM • Plus • HARD HCS • Pro • WOOD WOOD BIM• • HARD WOOD HCS •Fast Basic • WOOD HCS • Fast • WOOD HCS • Variable • WOOD Basic • WOOD BIM • Laminate • HARD WOOD HCS • Fast • WOOD HCS •• Basic Ultra ••WOOD HCS WOOD BIM • Plus • HARD WOOD HCS • Pro • WOOD HCS • Basic • WOOD BIM • Plus • HARD WOOD HCS • Pro • WOOD HCS •Fast Basic • WOOD BIM• • HARD WOOD BIM • HARD WOOD HCS••Variable Pro • WOOD HCS • Variable • WOOD HCS• Laminate • Fast • WOOD BIM • HARD WOOD HCS • Ultra • WOOD HCS Fast••HARD WOODWOOD BIM ••Plus HCS • Pro • WOOD HCS • Basic • WOOD BIM • Plus • HARD WOOD HCS • Basic Pro • WOOD HSS • METAL BIM• Fast • HARD WOOD BIM •• Variable • HARD WOOD HCS Fast • WOOD HCS • Variable • WOOD BIM • Laminate • HARD WOOD HCS • Fast • WOOD HCS • Ultra • WOOD HCS • Fast••HARD WOODWOOD BIM HSS•••Plus Basic METAL HCS Ultra ••WOOD BIM • Plus • HARD WOOD HCS Fast • •WOOD HSS •Fast Basic METAL BIM• • HARD WOOD BIM • Variable • HARD WOOD HCS • Fast • WOOD HCS • Variable • WOOD HCS • Fast • WOOD BIM • Laminate • HARD WOOD HSS • Basic • METAL HCS Variable • WOOD BIM • HARD WOOD HSS•••Plus Basic • METAL HCS Pro • WOOD BIM • Plus • HARD WOOD HCS • Basic Pro • WOOD HSS • METAL BIM• •Fast • HARD WOOD BIM ••Variable • HARD WOOD HCS Fast • WOOD BIM• • HARD WOOD HSS •Fast Basic • METAL BIM • Laminate • HARD WOOD HCS • WOOD HSS • Pro Basic • METAL BIM ••Plus • HARD WOOD HSS Basic • METAL HCS • Pro • WOOD BIM • Plus • HARD WOOD HCS •• Basic Pro • WOOD HSS • METAL BIM •• Plus Multi •• HARD METALWOOD BIM BIM • Variable • HARD WOOD HCS HSS • Ultra Basic••WOOD METAL BIM • Laminate • HARD WOOD HSS • Basic METAL HCS Ultra ••WOOD BIM • Plus • HARD WOOD HSS • METAL HCS •• Basic Pro • WOOD BIM • Multi • METAL BIM • Plus • HARD WOOD HSS • Basic • METAL HCS • Variable • WOOD BIM • Multi • METAL BIM • Variable • HARD WOOD HSS • Basic • METAL HCS Variable • WOOD BIM • Laminate • HARD WOOD HCS Ultra ••WOOD HSS • Basic METAL BIM• •Laminate Multi • METAL BIM • HARD WOOD HSS • Basic • METAL BIM• WOOD BIM •Fast Multi• •HARD METAL HSS Basic • METAL BIM•••Fast WOOD BIM Multi• •HARD METAL BIM • Variable • HARD WOOD HCS Variable • WOOD HSS • Basic • METAL BIM • Variable • HARD WOOD INOX • METAL HSS • Basic • METAL BIM • Multi••HARD METALWOOD BIM HSS••Plus Basic • METAL BIM • Multi • METAL BIM • Plus • HARD WOOD HSS Basic • METAL BIM• •Fast • HARD WOOD BIM • METAL HSS••Multi Variable • METAL HSS • Basic • METAL HSS • Basic • METAL INOX• •HARD METAL BIM • Plus WOOD HSS • Basic • METAL BIM •• Plus Multi •• HARD METALWOOD BIM HSS • Basic • METAL BIM • Multi • METAL BIM • Plus • HARD WOOD Basic• •METAL METAL HSS • ALU BIM ••Multi • METAL HSS Variable METAL BIM • Laminate • •HARD WOOD HSS • Basic • METAL BIM • HARD WOOD BIM• •Laminate INOX • METAL HSS • Basic • METAL BIM •• Plus Multi •• HARD METALWOOD BIM HSS HSS •• ALU Basic• •METAL METAL BIM • Multi • METAL BIM • HARD WOOD HSS••Variable ALU • METAL BIM • Multi • METAL HSS••Variable Variable METALWOOD BIM ••HARD HSS • Basic • METAL BIM • HARD WOOD BIM• •Laminate METAL HCS •INOX PVC •• ABRASIVE HSS • Basic • METAL BIM • Multi • METAL HSS • Basic ALU • •METAL HSS METAL BIM ••Multi • METAL HSS •• ALU HSS Basic• •METAL METAL BIM • Multi • METAL HSS••Variable Variable METALWOOD BIM ••HARD HSS••Multi PC • •ABRASIVE BIM METAL BIM METAL HCS•••INOX PVC •••ABRASIVE HSS Basic METAL BIM • Multi • METAL HSS • ALU Basic• •METAL METAL BIM • Multi • METAL HSS •• ALU HSS Basic• •METAL METAL BIM Multi Plastics • METAL• ABRASIVE HM •• Hard HSS • Variable • METAL PC • ABRASIVE HSS • Basic • METAL BIM ••INOX METAL HCS PVC •• ABRASIVE HSS • Basic • METAL BIM • Multi • METAL Basic• •METAL METAL HSS • ALU HM • Ceramics • ABRASIVE BIM • Multi • METAL HSS • ALU • METAL HM • •Hard • ABRASIVE HSS BasicPlastics • METAL HSS • Variable • METAL HSS • ABRASIVE HSS •• PC Basic • METAL BIM ••INOX • ABRASIVE METAL HCS PVC • HSS • Basic • METAL HCS • Soft Material • ABRASIVE BIM • INOX • METAL HSS • ALU • METAL

LAME PER SEGHETTI ALTERNATIVI CON ATTACCO BOSCH® PER METALLI Jig saw blades BOSCH type for metals

23620 cod. € conf./pack

€ 5,302

€ 5,229

T345XF

~T318B ~T234X € 9,059 ~T101BIF

~T318A ~T144DP ~T318BF ~T101BIF ~T218A ~T344DF ~T118BF ~T118G ~T344DF ~T318AF ~T345XF T345XF ~T318B ~T234X ~T118GFS ~T345XF T345XF ~T318A ~T318BF ~T101BF ~T218A ~T118BF 23620125 ~T101BF ~T118G ~T344DF ~T318AF ~T123XF ~T118G ~T318B ~T118GFS ~T101BRF ~T318A ~T318BF ~T101BRF ~T218A ~T118BF ~T101BF ~T127D ~T218A ~T318AF ~T123XF ~T101BIF ~T318B ~T118GFS ~T101BIF ~T318A 23620130 ~T318BF ~T101BRF ~T318A ~T227D ~T118BF ~T345XF ~T127D T345XF ~T318AF ~T123XF ~T345XF T345XF ~T318B ~T118GFS ~T101BIF ~T102H ~T318B ~T318BF ~T227D ~T118G ~T118BF ~T127D ~T118G ~T318AF ~T345XF ~T123XF T345XF ~T101A ~T318AF ~T118GFS 23620150 ~T102H ~T218A ~T318BF ~T227D ~T218A ~T118BF ~T127D ~T118G ~T341HM ~T118BF ~T123XF ~T318A ~T101A ~T118GFS ~T318A ~T102H ~T318BF ~T227D ~T218A ~T150RIFF ~T318BF ~T127D ~T318B ~T341HM ~T123XF 23620155 ~T318B ~T101A ~T118GFS ~T318A ~T102H ~T113A ~T118GFS ~T227D ~T150RIFF ~T318AF ~T127D ~T341HM ~T318AF ~T123XF

€ 9,280

€ 9,309

€ 5,302

€ 9,309

~T318B ~T101A ~U111C ~T123XF ~T102H ~T113A ~T118BF ~T227D ~T150RIFF ~T118BF ~T127D 23620170 ~T341HM ~T318AF ~U111D ~T127D ~T101A ~U111C ~T318BF ~T102H ~T113A ~T318BF ~T227D ~T150RIFF ~T118BF ~U144D ~T227D ~T341HM ~U111D ~T118GFS ~T101A ~U111C ~T118GFS ~T102H ~T113A ~T318BF ~U1AO 23620175 ~T102H ~T150RIFF ~U144D ~T123XF ~T341HM ~U111D ~T123XF ~T101A ~U111C ~T118GFS ~U101B ~T101A ~T113A ~U1AO ~T127D ~T150RIFF ~U144D ~T127D ~T341HM ~U111D ~T123XF ~U101D ~T341HM ~U111C ~U101B ~T227D 23620180 ~T113A ~U1AO ~T227D ~T150RIFF ~U144D ~T127D ~U234X ~T150RIFF ~U111D ~U101D ~T102H ~U111C ~U101B ~T102H ~T113A ~U1AO ~T227D ~U118A ~T113A ~U144D ~U234X ~T101A ~U111D ~U101D ~T101A 23620185 ~U111C ~U101B ~T102H ~U118B ~U111C ~U1AO ~U118A ~T341HM ~U144D ~U234X ~T341HM ~U111D ~U101D ~T101A ~U111D ~U127D ~U101B ~U118B ~T150RIFF ~U1AO ~U118A ~T150RIFF ~U144D ~U234X ~T341HM ~U144D ~U101D ~U127D ~T113A ~U101B ~U118B ~T113A ~U1AO ~U118A ~T150RIFF ~U1AO ~U234X

€ 6,998

€ 8,338

€ 7,329

€ 5,598

Metalli

simile a similar to

T118

T218A

T318A

T318B

T318AF

T118BFI

T318BF

Lxp mm inches x tpi

T123XF

T118 FS

HM • Ceramics • ABRASIVE

HSS • METAL HCS •• Variable Fast • WOOD HM • Hard Plastics • ABRASIVE HCS Basic • WOOD HSS •• Variable • METAL HSS • PC • ABRASIVE HCS • Basic • WOOD BIM • INOX • METAL HCS • Plus • WOOD HSS • PC • ABRASIVE HCS • Soft Material • ABRASIVE HCS •• ALU Plus •• METAL WOOD HSS

BASIC

76x0,8 3x32

BASIC

T12 D

T22 D

Metals

Fresata Milled

Alu

< 1,5

Cu Zn Ni Ms

< 1,5

76x1,2 3x21

Fresata Milled

Alu

Cu Zn Ni Ms

HSS

BASIC

132x1,2 5x21

Fresata Milled

Alu

< 65

<3 Ø < 65

Cu Zn Ni Ms

<3 Ø < 65

< 10 Ø < 65

< 25 Ø < 65

< 10

<6 Ø < 65

< 15 Ø < 65

HSS

BASIC

132x2 5x12

Cu Zn Ni Ms

Alu

Fresata Milled

<6 Ø < 65

< 10 Ø < 50

HSS

MULTI

132x1,2 5x21

Fresata Milled

Alu

< 65

<6 Ø < 65

Cu Zn Ni Ms

HSS

MULTI

76x2 5x12

Fresata Milled

Alu

Cu Zn Ni Ms

HSS

MULTI

132x2 5x12

Fresata Milled

Alu

< 65

<6 Ø < 65

Cu Zn Ni Ms

<6 Ø < 65

< 10

HSS

ARIABLE

100x1,2÷2,6 4x10÷21

Fresata Milled

Alu

< 10

Cu Zn Ni Ms

< 10

HSS

INOX

82x0,8 3x32

Fresata Milled

< 1,5

HSS

ALU

HM • Ceramics • ABRASIVE

HCS Fast •• METAL WOOD HSS • ALU HCS• Ceramics • Variable• •ABRASIVE WOOD HM HCS • Basic • WOOD HCS • PVC Plus • ABRASIVE WOOD HCS • Basic • WOOD HCS • Plus PVC •• WOOD ABRASIVE HCS • Soft Material • ABRASIVE HCS Plus •• METAL WOOD HSS • ALU HSS • METAL HCS •• Basic Soft Material • ABRASIVE HCS • Fast • WOOD HCS • WOOD HSS• •Variable PC • ABRASIVE HCS • Basic • WOOD HCS • Plus • WOOD HSS • PC • ABRASIVE HCS • Basic • WOOD PVC •• WOOD ABRASIVE HCS • Plus HSS • Basic • METAL HCS • Basic • WOOD HCS • Plus • WOOD HSS• •Hard Basic • METAL HM Plastics • ABRASIVE HCS • Fast • WOOD HCS • Variable • WOOD HM Plastics • ABRASIVE HCS• •Hard Basic • WOOD

HSS

HM • Ceramics • ABRASIVE

HCS Fast •• METAL WOOD HSS •• ALU HM • Hard Plastics • ABRASIVE HCS Basic • WOOD HSS • Variable • METAL HCS PlusPlastics • WOOD• ABRASIVE HM • •Hard HCS • Basic • WOOD HCS •• ALU Plus •• METAL WOOD HSS HCS • Soft Material • ABRASIVE HCS Plus •• METAL WOOD HSS • ALU

tipo di taglio impieghi finitura applications Type of cut-Finish mm

HSS

HM • Ceramics • ABRASIVE BIM • Multi • METAL

HSS • ALU • METAL HM •• Hard Plastics • ABRASIVE BIM • METAL HSS •Multi Variable • METAL HSS • PC • ABRASIVE Basic • METAL HCS • Basic • WOOD HSS • Variable • METAL HCS • PVC • ABRASIVE HCS• •Multi Soft •Material BIM METAL • ABRASIVE HSS • ALU • METAL HM • Ceramics • ABRASIVE BIM • Multi • METAL HSS • ALU • METAL HM Plastics • ABRASIVE BIM Multi • METAL HCS••••Hard Basic WOOD HSS ALU • •METAL HSS • PC • ABRASIVE HCS BIM• •Basic Multi••WOOD METAL HCS • PVC • ABRASIVE HCS••Multi Soft •Material BIM METAL• ABRASIVE HSS • ALU • METAL HM • Ceramics • ABRASIVE BIM • Multi • METAL HCS Fast •• METAL WOOD HSS • ALU HM Plastics • ABRASIVE HCS• Hard • Basic • WOOD BIM • INOX • METAL HSS • PC • ABRASIVE HCS • Basic • WOOD BIM ••INOX METAL HCS PVC •• ABRASIVE HCS••Multi Soft •Material BIM METAL• ABRASIVE Plus •• WOOD HCS • PVC ABRASIVE

acciaio steel

100x3 4x8

Fresata Milled

Alu

< 15

Cu Zn Ni Ms

< 15

Ø < 30

HSS

ALU

100x3 4x8

Fresata Milled

Alu

< 15

Cu Zn Ni Ms

< 15

Ø < 30

HCS • Plus • WOOD

HCS • Plus • WOOD HCS • Plus • WOOD

~T101AO

~T101AO ~T101B

HCS • Basic • WOOD HCS • Basic • WOOD

HCS • Plus • WOOD HCS • Plus • WOOD HCS • Plus • WOOD

HCS • Basic • WOOD HCS • Basic • WOOD HCS • Fast • WOOD

HCS • Plus • WOOD HCS • Plus • WOOD HCS • Basic • WOOD

HCS • Basic • WOOD HCS • Fast • WOOD HCS • Fast • WOOD

HCS • Plus • WOOD HCS • Basic • WOOD

HCS • Fast • WOOD HCS • Fast • WOOD HCS • Fast • WOOD

~T101B ~T101BR ~T119B

~T111C ~T144D ~T244D

~T119BO ~T111C ~T144D

HCS • Pro • WOOD HCS • Pro • WOOD HCS • Ultra • WOOD

HCS • Fast • WOOD HCS • Fast • WOOD HCS • Pro • WOOD

~T101AO ~T101B ~T101BR

~T144D ~T244D ~T344D

HCS • Fast • WOOD HCS • Pro • WOOD HCS • Pro • WOOD

~T119B ~T119BO ~T111C

~T244D ~T344D ~T308B

~T101BR ~T119B ~T119BO

~T344D ~T308B ~T308BO

HCS • Pro • WOOD HCS • Ultra • WOOD HCS • Variable • WOOD

~T308B ~T308BO ~T144DP

~T308BO ~T144DP ~T234X

HCS Plus• ABRASIVE • WOOD HSS • PC Confezione HSS HCS • ALU Basic• •METAL WOOD • Plus • WOOD HSS • Basic •• ABRASIVE METAL • Ceramics Packaging HMHCS HCS • Plus • WOOD

3 pcs.

~U111C ~U101D

HSS • Basic •• ABRASIVE METAL HM • Ceramics

HCS • Fast • WOOD HCS • WOOD HM •• Variable Hard Plastics • ABRASIVE HCS • Fast • WOOD HCS • Plus • WOOD HCS Soft Material HSS • ALU • METAL• ABRASIVE HCS • Plus • WOOD HSS • METAL HCS •• Basic Soft Material • ABRASIVE HCS • Plus • WOOD HSS • Basic • ABRASIVE METAL HM • Ceramics HCS • Plus • WOOD HCS • Variable • WOOD HCS • Basic • WOOD HCS • Plus • WOOD

475

LAME PER SEGHETTI ALTERNATIVI CON ATTACCO BOSCH® PER LEGNO

Jig saw blades BOSCH® type for wood and plywood

23600 ~T101AO

cod. ~T101B € conf./pack ~T101AO ~T101BR

Legno dolce 25

simile a similar HCS • Plus • WOOD to

HCS • Plus • WOOD HCS • Plus • WOOD

~T101AO ~T119B

HCS • Plus • WOOD HCS • Basic • WOOD

~T101BR

HCS • Plus • WOOD

€ 3,903

HCS • Plus Basic• •WOOD WOOD

~T119BO

~T101AO ~T119B

T119B

HCS • Plus Basic• •WOOD WOOD HCS • Plus • WOOD HCS • Basic • WOOD

~T101AO ~T119B ~T144D

~T111C € 3,903

T119B0

HCS • Plus • WOOD HCS • Basic • WOOD HCS HCS •• Plus Basic• •WOOD WOOD HCS • Fast • WOOD HCS • Plus • WOOD

~T101BR ~T111C ~T344D ~T101B ~T119BO ~T244D

HCS HCS •• Plus Basic• •WOOD WOOD HCS • Fast • WOOD HCS HCS •• Plus Basic• •WOOD WOOD

~T144D ~T308B € 3,020 ~T101BR

HCS • Basic • WOOD HCS • Fast • WOOD HCS • Pro • WOOD HCS HCS •• Plus Basic• •WOOD WOOD

~T111C ~T344D

~T119BO ~T244D ~T308BO ~T119B ~T144D ~T308B

HCS • Fast • WOOD

T111C

HCS • Fast • WOOD HCS •Fast Pro •• HARD WOODWOOD BIM• HCS • Fast • WOOD HCS • Pro • WOOD HCS • Variable • WOOD

~T344D € 5,892 ~T144DP ~T101BF

HCS • Fast • WOOD HCS • Ultra • WOOD BIM • Plus • HARD WOOD HCS • Fast • WOOD HCS • Pro • WOOD BIM• Fast • HARD WOOD

~T308B ~T234X ~T101BRF ~T344D ~T144DP ~T101BF

HCS • Pro • WOOD HCS • Variable • WOOD BIM • Plus • HARD WOOD HCS • Fast • WOOD HCS • Ultra • WOOD

~T308BO

HCS • Pro • WOOD BIM• Fast • HARD WOOD BIM • Laminate • HARD WOOD HCS • Pro • WOOD HCS • Variable • WOOD BIM • Plus • HARD WOOD

~T308B ~T234X ~T101BRF

€ 7,218

~T144DP ~T101BF ~T345XF T345XF ~T308BO ~T344DF ~T101BIF ~T101AO ~T234X ~T101BRF ~T118G ~T144DP ~T101BF ~T345XF T345XF

23600150 ~T101B ~T344DF € 5,598 ~T101BIF

~T218A ~T101AO ~T234X ~T101BRF ~T118G ~T101BR ~T101BF ~T345XF T345XF ~T318A ~T101B ~T344DF ~T101BIF ~T218A ~T101AO ~T119B ~T101BRF ~T118G ~T318B ~T101BR ~T101BF ~T345XF T345XF ~T318A ~T101B ~T119BO ~T101BIF ~T218A ~T318AF ~T119B ~T101BRF ~T118G ~T318B ~T101BR

23600155

€ 6,702

23600160

€ 11,342

HCS • Plus • WOOD HCS • Plus • WOOD HCS • Plus • WOOD

HCS • Plus • WOOD HCS • Plus • WOOD

HCS • Plus • WOOD

HCS • Plus • WOOD HCS • Plus • WOOD HCS • Basic • WOOD

~T101AO

HCS • Plus • WOOD HCS • Basic • WOOD

~T101AO ~T101B

HCS • Basic • WOOD HCS • Basic • WOOD

~T101AO ~T101B ~T101BR

HCS • Basic • WOOD HCS • Basic • WOOD HCS • Fast • WOOD

~T101B ~T101BR ~T119B

HCS • Basic • WOOD HCS • Fast • WOOD HCS • Fast • WOOD

HCS • Fast • WOOD HCS • Fast • WOOD HCS • Fast • WOOD

~T111C ~T144D ~T244D

HCS • Pro • WOOD HCS • Pro • WOOD HCS • Ultra • WOOD

HCS • Fast • WOOD HCS • Fast • WOOD HCS • Pro • WOOD

~T119B ~T119BO ~T111C

~T144D ~T244D ~T344D

HCS • Fast • WOOD HCS • Pro • WOOD HCS • Pro • WOOD

~T119BO ~T111C ~T144D

~T244D ~T344D ~T308B

~T101BR ~T119B ~T119BO

~T344D ~T308B ~T308BO

HCS • Pro • WOOD HCS • Ultra • WOOD HCS • Variable • WOOD

~T308B ~T308BO ~T144DP

~T308BO ~T144DP ~T234X

~T111C ~T345XF T345XF ~T318A ~T118BF ~T119BO ~T101BIF ~T218A ~T318AF ~T119B ~T144D ~T118G ~T318B ~T318BF ~T111C ~T345XF T345XF ~T318A ~T118BF ~T119BO ~T244D ~T218A ~T318AF ~T118GFS ~T144D ~T118G ~T318B ~T318BF ~T111C ~T344D ~T318A

< 15

76x2 3x12

Fresata Milled

< 15

BASIC

100x3 4X8

Fresata Milled

< 50

<5 Ø < 30

< 50

<5 Ø < 50

< 50

<5 Ø < 50

< 100

< 15

< 30

<30

<5 Ø < 30

< 30

<30

<5 Ø < 30

HCS

~T244D ~T308BO ~T344DF ~T144D ~T308B ~T234X

~T344DF 23600140 ~T101BIF

BASIC

HCS • Basic • WOOD HCS • Fast • WOOD HCS • Pro • WOOD HCS • Basic • WOOD HCS • Fast • WOOD HCS • Pro • WOOD

HCS • Fast • WOOD HCS • Pro • WOOD HCS • Variable • WOOD HCS • Basic • WOOD HCS • Fast • WOOD HCS • Ultra • WOOD

~T244D ~T308BO ~T344DF

Fresata Milled

HCS • Fast • WOOD

~T144D ~T308B ~T234X ~T111C ~T344D ~T144DP

23600135

HCS

HCS • Basic • WOOD HCS • Fast • WOOD HCS • Ultra • WOOD HCS • Basic • WOOD HCS • Fast • WOOD HCS • Pro • WOOD

€ 5,451

76x2 3x12

HCS • Basic • WOOD HCS • Fast • WOOD

~T244D ~T308BO

~T111C ~T344D

~T144DP 23600130 ~T119BO

tipo di taglio impieghi finitura applications Type of cut-Finish mm

HCS

HCS • Plus • WOOD HCS •• Fast Basic• •WOOD WOOD HCS

~T101B ~T119BO ~T244D ~T101AO ~T119B ~T144D

23600110 ~T119B

BASIC

HCS • Basic • WOOD

~T101B ~T119BO

acciaio steel

Mild wood

HCS

HCS • Plus • WOOD

~T101BR ~T111C

23600105 ~T101BR

Lxp mm inches x tpi

HCS • Plus • WOOD

~T101B

23600100 ~T101B

HCS • Plus • WOOD

T144D

T244D

FAST

100X4 4X6

Rettificata Ground HCS

FAST

100X4 4X6

Rettificata Ground HCS

BIM • Plus • HARD WOOD

T344D

FAST

132X4 5X6

HCS • Ultra • WOOD BIM • Plus • HARD WOOD Variable • HARD WOOD HCS • Pro • WOOD BIM• Fast • HARD WOOD BIM • Laminate • HARD WOOD HCS • Plus • WOOD HCS • Variable • WOOD BIM • Plus • HARD WOOD HSS • Basic • METAL HCS • Ultra • WOOD BIM • Plus • HARD WOOD BIM • Variable • HARD WOOD

T101AO

HCS •Fast Plus• •HARD WOOD BIM• WOOD BIM • Laminate • HARD WOOD HSS • Basic METAL HCS Plus • •WOOD HCS • Variable • WOOD BIM • Plus • HARD WOOD HSS • Basic • METAL HCS • Plus • WOOD BIM • HARD WOOD BIM •• Plus Variable • HARD WOOD HSS •• Basic •WOOD METAL HCS Plus• •HARD BIM• Fast WOOD BIM • Laminate • HARD WOOD HSS • Plus Basic• •WOOD METAL HCS HCS • Basic • WOOD BIM • Plus • HARD WOOD HSS • METAL HSS ••• Basic Basic METAL HCS Plus • •WOOD BIM •• Variable Plus • HARD WOOD BIM • HARD WOOD

T101B

HSS • Plus Basic• •WOOD METAL HCS HCS • Basic • WOOD BIM • Laminate • HARD WOOD HSS • Basic • METAL BIM • Multi • METAL HCS • Basic • WOOD BIM • Plus • HARD WOOD HSS • Basic • METAL HSS •• Plus Basic• •WOOD METAL HCS HCS • Basic • WOOD BIM • Variable • HARD WOOD HSS Basic BIM HCS•••Multi Basic• •METAL • METAL WOOD BIM • Laminate • HARD WOOD HSS • Basic • METAL

T101BR

BIM •• Multi HCS Basic• •METAL WOOD HCS • Fast • WOOD HSS • Basic • METAL HSS •• Basic HCS Basic• •METAL • METAL WOOD BIM • Multi BIM • Variable • HARD WOOD HSS • Basic • METAL HCS Basic• •METAL WOOD BIM •• Multi HCS Fast • •WOOD HSS •• Basic METAL

Rettificata Ground HCS

PLUS

76X1,4 3X18

Rettificata Ground HCS

PLUS

100x2,5 4x10

Rettificata Ground HCS

RE ERSE

100x2,5 4x10

Rettificata Ground

BIM • Multi • METAL Fast •• WOOD BIM ••INOX METAL Confezione HCS HSS • Basic • METAL HSS • Basic • METALEsempio di interpretazione della colonna “Impieghi (mm)”: HCS Basic• •METAL WOOD BIM •• Multi Packaging HCS • Fast • WOOD

3 pcs. ~T118BF ~T123XF ~T244D ~T218A ~T318AF ~T118GFS ~T144D ~T308B ~T318B ~T318BF ~T127D ~T344D ~T318A ~T118BF ~T123XF ~T244D ~T308BO ~T318AF ~T118GFS ~T227D ~T308B ~T318B ~T318BF ~T127D ~T344D ~T144DP ~T118BF ~T123XF ~T102H ~T308BO ~T318AF ~T118GFS ~T308B ~T227D ~T234X ~T318BF ~T127D ~T101A ~T144DP ~T118BF ~T123XF

~T102H ~T308BO 476 ~T118GFS ~T344DF ~T227D ~T341HM ~T234X ~T318BF ~T127D ~T101A ~T144DP

How to read the “Application (mm)” column:

HSS • Basic • METAL BIM • Multi • METAL HSS •• Variable • METAL HCS Fast • WOOD HSS • Basic • METAL BIM • Multi • METAL HCS Fast ••WOOD BIM •• INOX METAL HCS • Pro • WOOD HSS • Basic • METAL BIM • Multi • METAL HSS •• ALU HCS Fast •• METAL WOOD HSS • Basic • METAL BIM • Multi • METAL HSS •• Fast Variable • METAL HCS • WOOD HCS • Pro • WOOD BIM • Multi • METAL BIM • INOX••METAL METAL HSS HCS •• ALU Pro • WOOD HSS • Basic • METAL BIM • Multi • METAL HSS • ALU HCS Fast • METAL WOOD HCS • Ultra • WOOD BIM • Multi • METAL HSS • Variable • METAL HCS ABRASIVE HCS •• PVC Pro • •WOOD BIM • Multi • METAL BIM • INOX • METAL HSS • ALU METAL HCS Pro ••WOOD HCS • Variable • WOOD BIM • Multi • METAL HSS • ALU • METAL HSS •• PC HCS Ultra• ABRASIVE • WOOD BIM • Multi • METAL HSS • Variable • METAL HCS •• Pro PVC• •WOOD ABRASIVE HCS BIM• Fast • HARD WOOD BIM • INOX • METAL HSS • ALU • METAL HM Plastics • ABRASIVE HCS• •Hard Variable • WOOD BIM • Multi • METAL HSS • ALU • METAL HSS • Ultra PC • ABRASIVE HCS • WOOD

Idoneo al taglio di legno stratificato dello spessore massimo di 50 mm Suitable for cutting stratified wood max thickness 50 mm

< 50

<5 Ø < 50

Idoneo al taglio di plastica in lastre con spessori fino a 5 mm e profili con dimensione massima 50 mm Suitable for cutting plastics sheet (max thickness 5 mm) and plastics pipes / structural (max dimension 50 mm)

AE , ATLAS OP O, BOS H, DE ALT, EL , FESTOOL, HITA HI, MA ITA, METABO, HILTI, MAFELL, MIL A EE, R OBI, S IL,...( )

~T119B

HCS • Basic • WOOD

~T101BR ~T101B

HCS • Plus • WOOD HCS • Plus • WOOD HCS • Plus • WOOD

~T101AO ~T119BO

HCS • Basic • WOOD

LAME PER SEGHETTI ALTERNATIVI CON ATTACCO BOSCH® PER LEGNO ~T119B ~T101BR

HCS • Basic • WOOD HCS • Plus • WOOD

~T101B

HCS • Plus • WOOD HCS • Basic • WOOD

~T111C

Jig saw blades BOSCH® type for wood and plywood ~T119BO ~T119B

HCS • Basic • WOOD

~T101BR

HCS • Plus • WOOD

~T144D ~T111C

HCS • Fast • WOOD HCS • Basic • WOOD HCS • Basic • WOOD

23600 ~T119BO ~T119B

HCS • Basic • WOOD

~T244D

HCS • Fast • WOOD

~T144D ~T111C

HCS • Fast • WOOD HCS • Basic • WOOD

~T344D

HCS • Fast • WOOD HCS • Fast • WOOD HCS • Fast • WOOD HCS • Basic • WOOD

cod. ~T119BO € conf./pack ~T244D ~T144D ~T111C ~T308B ~T344D ~T101AO

~T244D

~T144D 23600170 ~T101AO ~T308BO € 8,934 ~T308B ~T101B ~T344D

~T244D ~T101B ~T144DP ~T101BR ~T308BO ~T308B ~T344D ~T101BR

23600175 ~T234X

€ 8,934

~T119B ~T144DP ~T101AO ~T308BO ~T308B ~T119B ~T344DF ~T119BO ~T234X ~T101B ~T101AO ~T144DP

~T308BO ~T119BO ~T111C ~T101BF

23600180 ~T344DF ~T101BR ~T101AO ~T101B ~T234X € 3,535 ~T144DP ~T111C ~T144D ~T101BRF

~T101BF ~T119B ~T101B ~T101BR ~T344DF ~T234X ~T144D ~T244D ~T101BIF ~T101BRF ~T119BO

~T101BR ~T119B 23600190 ~T101BF ~T344DF € 8,934 ~T244D ~T344D ~T345XF T345XF

Legno dolce

Mild wood

simile a similar to

Lxp mm inches x tpi

HCS • Basic • WOOD

HCS

HCS • Pro • WOOD

HCS • Fast • WOOD

T308B

HCS HCS• Fast • Plus• WOOD • WOOD HCS • Pro • WOOD

PRO

HCS• •Plus Pro •• WOOD WOOD HCS

116x2,2 4½x11

HCS • Fast • WOOD HCS • Fast • WOOD HCS • Plus • WOOD HCS • Ultra • WOOD

HCS • Fast • WOOD HCS • Plus • WOOD HCS • Variable • WOOD HCS • Ultra • WOOD HCS • Pro • WOOD

T308B0

HCS • Basic HCS • Plus• •WOOD WOOD

PRO

116x2,2 4½x11

HCS • WOOD HCS• Pro • Basic • WOOD HCS • Basic • WOOD BIM • Plus • HARD WOOD BIM• • HARD WOOD HCSFast • Plus • WOOD HCS• •Variable Plus • WOOD HCS • WOOD

T144DP

ULTRA

HCS • WOOD HCS• Ultra • Basic • WOOD HCS • Fast • WOOD BIM • Plus • HARD WOOD HCS • Basic • WOOD BIM • Plus • HARD WOOD HCS Plus WOOD HCS •• Plus •• WOOD BIM• Fast • HARD WOOD

HCS • Plus • WOOD HCS • Plus • WOOD HCS • Plus • WOOD

HCS • Plus • WOOD HCS • Plus • WOOD

HCS • Plus • WOOD

~T101AO ~T101B

HCS • Plus • WOOD HCS • Plus • WOOD HCS • Basic • WOOD

~T101AO

~T101B ~T101BR ~T119B

~T101AO ~T101B ~T101BR

HCS • Plus • WOOD HCS • Basic • WOOD

HCS • Basic • WOOD HCS • Basic • WOOD HCS • Fast • WOOD

HCS • Basic • WOOD HCS • Basic • WOOD

HCS • Basic • WOOD HCS • Fast • WOOD HCS • Fast • WOOD

HCS • Fast • WOOD HCS • Fast • WOOD HCS • Fast • WOOD

~T111C ~T144D ~T244D

HCS • Fast • WOOD HCS • Fast • WOOD HCS • Pro • WOOD

~T119B ~T119BO ~T111C

~T144D ~T244D ~T344D

HCS • Pro • WOOD HCS • Pro • WOOD HCS • Ultra • WOOD

HCS • Fast • WOOD HCS • Pro • WOOD HCS • Pro • WOOD

~T101BR ~T119B ~T119BO

~T244D ~T344D ~T308B

~T119BO ~T111C ~T144D

~T344D ~T308B ~T308BO

HCS • Pro • WOOD HCS • Ultra • WOOD HCS • Variable • WOOD

~T308B ~T308BO ~T144DP

~T308BO ~T144DP ~T234X

BIM • Laminate • HARD WOOD HCS • Basic • WOOD BIM • Plus • HARD WOOD HCS HCS •• Plus Basic• •WOOD WOOD BIM • Plus • HARD WOOD BIM• Fast • HARD WOOD HCS • Fast • WOOD HCS • Fast • WOOD BIM • Variable • HARD WOOD HCS • Basic ••WOOD BIM • Laminate HARD WOOD HCS • Basic • WOOD BIM • Plus • HARD WOOD

T234X

~T308BO cod. ~T318A ~T344D ~T218A € conf./pack ~T144D ~T244D

~T101BIF ~T144DP

HCS Ultra BIM • •Laminate • HARD WOOD HCS • Pro• WOOD • WOOD

~T234X ~T345XF T345XF ~T144DP

HCS BIM • Variable Variable ••WOOD HARD WOOD

~T318AF ~T318A

~T118BF ~T318AF ~T144DP ~T308B ~T308BO ~T318B

~T101BRF

~T318A ~T101BF

~T318BF ~T234X ~T118BF ~T308BO ~T144DP ~T318AF ~T101BIF 23610120 ~T318B ~T101BRF ~T118GFS

€ 10,311

ARIABLE

100x4 4X6

116x2÷3 4½x8÷12

BIM • Multi • METAL HCS• •Basic Pro ••WOOD HSS METAL HCS WOOD HCS •• Fast Pro • •WOOD HSS • Basic • METAL

T344DF

~T101A

€ 9,295

HCS • Ultra • WOOD BIM • Multi • METAL HCS HCS •• Pro Pro •• WOOD WOOD HSS • Basic • METAL

HSS • Basic • METAL BIM • Plus • HARD WOOD BIM • Multi • METAL BIM • Multi HCS • Variable • WOOD HCS Pro •• METAL HCS •• Ultra •WOOD WOOD BIM • Laminate • HARD WOOD BIM • Multi • METAL

T101BF

HSS • Basic • METAL BIM • Plus • HARD WOOD

BIM• •INOX Plus •• METAL HARD WOOD BIM BIM • Multi • METAL HSS • Basic • METAL HSS • ALU • METAL

T101BRF

HSS•••Basic ALU • METAL BIM Laminate • HARD WOOD HSS BIM • Plus••METAL HARD WOOD

~T102H ~T118BF ~T118GFS ~T113A ~T318B ~T150RIFF ~T218A ~T318A ~T341HM

< 65

acciaio steel

tipo di taglio impieghi finitura applications Type of cut-Finish mm

Rettificata Ground

100x2,5 4X10

Rettificata Ground

< 65

< 100

< 30

< 25 Ø < 50

< 10

RE ERSE

100x2,5 4X10

HCS • PVC • ABRASIVE

LAMINATE

82x1,7 3X15

HM • Hard Plastics • ABRASIVE HSS • Basic • METAL HSS • ABRASIVE BIM •• PC Variable • HARD WOOD HCS • ABRASIVE HSS• •PVC Basic • METAL HSS • ALU • METAL BIM • Multi • METAL

T345XF

HM • Ceramics • ABRASIVE BIM • Multi • METAL

HSS • Basic • METAL HM • Hard Plastics • ABRASIVE HSS • Basic • METAL HSS • PC • ABRASIVE HCS • PVC • ABRASIVE BIM • Multi • METAL

Cu Zn Ni Ms

< 10 Ø < 50

< 45

Rettificata Ground

< 30

< 25 Ø < 50

< 15

< 45

HCS

BIM• •Basic • ALU Variable • HARD WOOD HSS METAL HSS • METAL

T101BIF

<5 Ø < 40

HCS

HSS • Basic • METAL BIM • INOX • METAL

BIM• •Laminate Plus • HARD WOOD BIM • HARD WOOD HSS • ALU • METAL HSS • Variable • METAL HSS • Basic • METAL HSS • PC • ABRASIVE HCS• Multi • PVC • ABRASIVE BIM • METAL HSS •Variable Basic • METAL BIM • •Laminate •• HARD BIM HARD WOOD WOOD HSS • ALU • METAL

< 30

Alu

BIM••Variable Plus • HARD WOOD HSS • METAL

BIM • Multi • METAL

€ 12,227

PLUS

HSS • ALU • METAL

~T341HM ~T118BF

~T227D ~T318AF 23610150 ~T150RIFF ~T318BF ~T318A ~T341HM ~T118G ~T218A ~T101A

< 65

HCS

HSS Variable • METAL BIM• HARD WOOD HSS • •Basic BIM •Fast Plus••METAL HARD WOOD

HSS • ALU • METAL HSS • Basic • METAL

~T102H

Rettificata Ground

BIM • •INOX METAL BIM Plus HARD WOOD HCS •Fast Variable • WOOD BIM• ••HARD WOOD

~T127D ~T318B

~T101A ~T218A ~T345XF T345XF ~T118G

152x4 6X6

BIM • Plus • HARD WOOD

~T118BF ~T345XF T345XF

~T318AF 23610140 ~T102H ~T118G ~T345XF ~T101BIF T345XF ~T227D

< 65

<5 Ø < 30

BIM • Multi • METAL

BIM • METAL BIM• Multi • Variable • HARD WOOD

~T123XF ~T318A

FAST

BIM• Fast • HARD WOOD

HSS METAL BIM •• Basic Multi •• METAL

~T118GFS ~T218A ~T102H ~T345XF ~T318B ~T227D T345XF ~T101BRF ~T101BIF ~T127D

< 50

HCS

BIM • HARD WOOD HSS• Plus • Basic • METAL

~T118GFS ~T101BF ~T234X ~T344DF ~T118G ~T318BF

~T318A ~T127D ~T101BIF € 10,311 ~T101BF ~T101BRF ~T123XF

< 50

Hard wood

Lxp mm inches x tpi

HCS • Ultra • WOOD

BIM • METAL BIM •• Multi Laminate • HARD WOOD HSS • Variable • METAL

~T318BF ~T118G

< 50

Legno duro

HSS • Basic • METAL HCS• ••Basic Pro ••WOOD HSS METAL HCS Fast WOOD HCS• •Basic Fast •• METAL WOOD HSS BIM• Fast • HARD WOOD HSS • METAL HCS• Basic • Variable • WOOD

~T318AF ~T101BIF ~T123XF

23610125 ~T227D

Rettificata Ground

HCS

HSS • Basic • METAL

~T344DF ~T318BF ~T144DP ~T234X ~T345XF T345XF ~T118BF

~T127D

< 65

HCS

simile a HSS • Basic • METAL HSS • •Basic HCSsimilar Fast ••• METAL WOOD HCS to HCS •• Fast Fast • WOOD WOOD

BIM • INOX • METAL BIM• Fast •• METAL HARD WOOD BIM • Multi HCS • Ultra • WOOD HCS • Variable • WOOD BIM ••Variable • HARD WOOD BIM Multi • METAL

~T123XF ~T101BRF ~T344DF ~T218A ~T101BF ~T118GFS

< 65

HSS • Basic • METAL HCS• •Basic Fast Basic• •WOOD WOOD HSS HCS • Fast •• METAL WOOD BIM • Variable • HARD WOOD

~T101BF € 16,328 ~T218A ~T344DF

< 65

HCS • WOOD HCS• Variable • Fast • WOOD

BIM Plus WOOD HCS • Pro • •WOOD HCS • Pro •HARD WOOD

~T318B ~T308BO 23610105 ~T344D ~T308B

Rettificata Ground

HCS • Fast • WOOD

~T118G ~T244D ~T111C ~T144D ~T345XF

~T318B ~T318A ~T308B ~T244D ~T344D ~T218A ~T344DF ~T118G ~T234X

< 65

HCS

HCS • WOOD HCS Plus HCS• ••Variable Plus •• WOOD WOOD HCS • Ultra • WOOD

~T101BRF ~T308B ~T308BO

~T118G

< 65

HCS

HCS • Pro • WOOD HCS • Basic • WOOD BIM•• Fast WOOD HCS Basic• •HARD WOOD

HSS • Basic • METAL BIM • Variable •WOOD HARD WOOD HCS • Fast Basic• ••WOOD HCS • Basic WOOD BIM • Laminate • HARD WOOD

~T218A

< 65

HCS • Pro • WOOD

~T118G ~T345XF T345XF ~T144D ~T119BO ~T111C ~T101BIF

23610 T345XF

Rettificata Ground

HCS HCS• •Plus Pro •• WOOD WOOD

~T101BF ~T344D ~T308B

3 pcs.

tipo di taglio impieghi finitura applications Type of cut-Finish mm

HCS HCS• •Plus Fast• •WOOD WOOD

Confezione Packaging HCS BIM Plus HARD WOOD HCS • Fast • WOOD •• Pro • •WOOD

~T111C ~T101BIF ~T119B ~T119BO ~T101BRF

acciaio steel

Rettificata Ground HCS

ARIABLE

132x2,4÷5 5X5÷10

Alu

Fresata Milled

< 65

< 30 Ø < 65

< 10

Cu Zn Ni Ms

< 10

INOX

<6 Ø < 65

HCS• INOX • Soft •Material BIM METAL • ABRASIVE HMHSS • Ceramics • Basic• •ABRASIVE METAL

HCS • Plus • WOOD HCS • Plus • WOOD HCS • Plus • WOOD

HCS • Plus • WOOD HCS • Plus • WOOD

HCS • Plus • WOOD

HCS • Plus • WOOD HCS • Plus • WOOD HCS • Basic • WOOD

~T101AO

HCS • Plus • WOOD HCS • Basic • WOOD

~T101AO ~T101B

HCS • Basic • WOOD HCS • Basic • WOOD

~T101B ~T101BR ~T119B

HCS • Basic • WOOD HCS • Basic • WOOD HCS • Fast • WOOD

~T101AO ~T101B ~T101BR

HCS • Basic • WOOD HCS • Fast • WOOD HCS • Fast • WOOD

HCS • Fast • WOOD HCS • Fast • WOOD HCS • Fast • WOOD

~T111C ~T144D ~T244D

HCS • Pro • WOOD HCS • Pro • WOOD HCS • Ultra • WOOD

HCS • Fast • WOOD HCS • Fast • WOOD HCS • Pro • WOOD

~T119B ~T119BO ~T111C

~T144D ~T244D ~T344D

HCS • Fast • WOOD HCS • Pro • WOOD HCS • Pro • WOOD

~T101BR ~T119B ~T119BO

~T244D ~T344D ~T308B

~T119BO ~T111C ~T144D

~T344D ~T308B ~T308BO

HCS • Pro • WOOD HCS • Ultra • WOOD HCS • Variable • WOOD

~T308B ~T308BO ~T144DP

~T308BO ~T144DP ~T234X

• Basic • METAL Confezione HMHSS• Hard Plastics • ABRASIVE HSS • ABRASIVE ~T101A BIM••PC Multi • METAL ~T318BF Packaging HSS • Variable • METAL ~T123XF ~U111C

3 pcs.

~T113A ~T318AF ~T318A ~T318B ~T150RIFF

~T341HM ~T118GFS ~T127D ~U111D ~U111C ~T118BF ~T318B ~T318AF ~T113A ~T150RIFF

HCS • Basic • WOOD HCS • Soft Material • ABRASIVE BIM HSS•••Multi Basic• ••METAL METAL HSS Basic METAL HM • Ceramics • ABRASIVE

HM • Hard Plastics • ABRASIVE BIM • INOX • METAL

HSS • METAL HCS• •ALU Basic • WOOD

BIM • Multi • METAL HCS • Basic • WOOD HSS • Basic • METAL BIM •• Soft MultiMaterial • METAL HCS • ABRASIVE HMHSS • Ceramics • ABRASIVE • Variable • METAL

477

~T318B ~T318A ~T218A ~T118G

HSS • Basic • METAL HSS •• Basic Basic •• METAL METAL HSS HSS • Basic • METAL BIM • Multi • METAL

~T118BF ~T318AF ~T318B ~T318A ~T218A

BIM • Multi • METAL HSS • Basic • METAL HSS • Basic • METAL HSS • Basic • METAL

~T318BF

BIM • Multi • METAL

~T118BF ~T318AF ~T318B ~T318A

BIM • Multi • METAL BIM • Multi • METAL HSS • Basic • METAL HSS • Basic • METAL

LAME PER SEGHETTI ALTERNATIVI CON ATTACCO BOSCH® PER APPLICAZIONI SPECIALI Jig saw blades BOSCH® type for special applications ~T118GFS

BIM • INOX • METAL

~T318BF ~T118BF ~T318AF ~T318B

BIM • Multi • METAL BIM • Multi • METAL BIM • Multi • METAL HSS • Basic • METAL HSS • Variable • METAL

23630 ~T123XF

~T118GFS ~T318BF ~T118BF ~T318AF

Applicazioni speciali

Special applications

BIM • INOX • METAL BIM • Multi • METAL BIM • Multi • METAL

~T127D

BIM • Multi • METAL HSS • ALU • METAL

~T118BF

HSS • Variable • METAL BIM • INOX • METAL BIM • Multi • METAL BIM • Multi • METAL

cod. ~T123XF ~T118GFS € conf./pack ~T318BF

simile a similar to

~T227D

HSS • ALU • METAL

~T127D ~T123XF ~T118GFS ~T318BF ~T102H

HSS • ALU • METAL HSS • Variable • METAL BIM • INOX • METAL BIM • Multi • METAL HCS • PVC • ABRASIVE

~T227D ~T127D ~T123XF

HSS • ALU • METAL HSS • ALU • METAL HSS • Variable • METAL

Lxp mm inches x tpi

100x2,3 4x11

BIM • INOX • METAL HSS • PC • ABRASIVE

~T101A € 4,611

HCS • PVC • ABRASIVE HSS • ALU • METAL HSS • ALU • METAL HSS • Variable • METAL

~T102H ~T227D ~T127D ~T123XF ~T341HM

HM • Hard Plastics • ABRASIVE

~T101A ~T102H ~T227D ~T127D

HSS • PC • ABRASIVE HCS • PVC • ABRASIVE HSS • ALU • METAL HSS • ALU • METAL

23630100 ~T150RIFF

€ 8,101 ~T341HM

T101A

HM • Ceramics • ABRASIVE

Rettificata Ground

< 15 Ø < 30

HSS

76x1,4 3x18

HARD PLASTICS

132x4 5x6

HM • Hard Plastics • ABRASIVE HSS • PC • ABRASIVE HCS • PVC • ABRASIVE HSS • ALU • METAL

~T101A ~T102H ~T227D

tipo di taglio impieghi finitura applications Type of cut-Finish mm

HCS

T102H

~T118GFS 23630090

acciaio steel

23630130

~T113A € 37,239 ~T150RIFF ~T341HM ~T101A ~U111D

~U111C ~T113A ~T150RIFF ~T341HM ~U144D

23630150 ~U111D

~U111C € 12,227 ~T113A

T341HM

HCS • Basic • WOOD

HCS • Soft Material • ABRASIVE

HM • Ceramics • ABRASIVE

HM • Hard Plastics • ABRASIVE HSS • PC • ABRASIVE HCS • Basic • WOOD

HM • Hard Plastics • ABRASIVE HCS • Fast • WOOD

T150RIFF

HCS • Basic • WOOD HCS • Basic • WOOD HCS • Soft Material • ABRASIVE

~T150RIFF ~U1AO

HCS • Plus • WOOD

RIT 50

T113A

~U101B ~U1AO ~U144D ~U111D ~U234X

HCS • Plus • WOOD HCS • Plus • WOOD HCS • Fast • WOOD HCS • Basic • WOOD

HCS • Plus • WOOD

HCS • Plus • WOOD HCS • Plus • WOOD

HCS • Plus • WOOD

HCS • Plus • WOOD HCS • Plus • WOOD HCS • Plus • WOOD

< 20

< 10

Rettificata Ground

< 50

< 10

odice osch Bosch code

Codice Krino Krino code

Carbide grit HCS

HCS • Plus • WOOD

~U101D

HCS • Plus • WOOD HCS • Plus • WOOD HCS • Basic • WOOD

HCS • Plus • WOOD HCS • Basic • WOOD

< 80

76 grana 50 on grani in MD 3

HCS • Fast • WOOD HCS • Basic • WOOD HCS • Basic • WOOD HCS • Soft Material • ABRASIVE HCS • Plus • WOOD HCS • Fast • WOOD HCS • Basic • WOOD HCS • Basic • WOOD

~T101AO

HCS • Basic • WOOD HCS • Basic • WOOD

< 50

HM • Ceramics • ABRASIVE

€ 4,810

~T101AO ~T101B

HCS • Basic • WOOD HCS • Basic • WOOD HCS • Fast • WOOD

on inserti in MD Carbide tip

HCS • Basic • WOOD HCS • Soft Material • ABRASIVE

~U111D ~U111C

~T101AO ~T101B ~T101BR

HCS • Basic • WOOD HCS • Fast • WOOD HCS • Fast • WOOD

< 15

HM • Hard Plastics • ABRASIVE HSS • PC • ABRASIVE HCS • PVC • ABRASIVE

~U1AO 23630160 ~U144D

~T101B ~T101BR ~T119B

~T111C ~T144D ~T244D

~T119B ~T119BO ~T111C

HCS • Fast • WOOD HCS • Fast • WOOD HCS • Fast • WOOD

~T119BO ~T111C ~T144D

HCS • Pro • WOOD HCS • Pro • WOOD HCS • Ultra • WOOD

HCS • Fast • WOOD HCS • Fast • WOOD HCS • Pro • WOOD

~T101BR ~T119B ~T119BO

~T144D ~T244D ~T344D

HCS • Fast • WOOD HCS • Pro • WOOD HCS • Pro • WOOD

HCS • Pro • WOOD HCS • Ultra • WOOD HCS • Variable • WOOD

~T244D ~T344D ~T308B

< 15

HM • Ceramics • ABRASIVE

~U144D ~U111D ~U111C ~T113A ~U101B

~T344D ~T308B ~T308BO

< 15

HCS • Soft Material • ABRASIVE

~T113A ~T150RIFF ~T341HM ~T101A ~T102H ~U111C

~T308B ~T308BO ~T144DP

~T308BO ~T144DP ~T234X

Rettificata Ground

Confezione Packaging

SOFT

100 4

HCS • Variable • WOOD

~U101D

HCS • Plus • WOOD HCS • Plus • WOOD HCS • Plus • WOOD HCS • Fast • WOOD

3~U101B pcs. ~U1AO ~U144D ~U118A

HSS • Basic • METAL

~U234X ~U101D ~U101B ~U1AO ~U118B

HCS • Variable • WOOD HCS • Plus • WOOD HCS • Plus • WOOD HCS • Plus • WOOD HSS • Basic • METAL

Tabella di comparazione

~U118A ~U234X ~U101D ~U101B

HSS • Basic • METAL HCS • Variable • WOOD HCS • Plus • WOOD HCS • Plus • WOOD

ChoosingHSS chart • ALU • METAL

~U127D

~U118B ~U118A ~U234X ~U101D

~U127D ~U118B ~U118A ~U234X

HSS • Basic • METAL HSS • Basic • METAL

• Variable • WOOD odice HCS osch HCS • Plus • WOOD Bosch code HSS • ALU • METAL HSS • Basic • METAL

HSS • Basic • METAL AHCS • Variable • WOOD A HSS • ALU • METAL HSS • Basic • METAL HSS • Basic • METAL

~U127D ~U118B ~U118A

I RHSS • ALU • METAL HSS • Basic • METAL R

~U127D ~U118B

~U127D

478

HSS • ALU • METAL

Codice Krino Krino code 23630100 23600150 23600155 23610120 23610140 23600160 23610125 23630090 23600110 23630160 23620150 23620100 23620175 23600100 23600105 23620170 23620180

D DP RI A D D A A

D D

23600130 23600180 23630150 23620110 23620185 23600190 23600135 23600170 23600175 23620115 23620130 23620125 23620155 23630130 23600140 23610105 23610150

~T150RIFF ~U111C

HM • Ceramics • ABRASIVE HCS • Basic • WOOD

~U111C ~U111D ~T113A

HCS • Basic • WOOD HCS • Soft• Material HCS • Basic WOOD • ABRASIVE

LAME PER SEGHETTI ALTERNATIVI CON ATTACCO BLACK&DECKER® PER METALLO

23710

HCS Plus •• WOOD WOOD HCS •• Plus HCS • Fast • WOOD

HSS ~U118A

HSS • Basic • METAL

~U127D ~U118B ~U118A

HSS • ALU • METAL HSS • Basic • METAL HSS • Basic • METAL

HSS HSS • ALU • METAL

~T101AO ~T101B

HCS • Plus • WOOD HCS • Plus • WOOD

HCS • Plus • WOOD HCS • Basic • WOOD

HCS • Plus • WOOD HCS • Plus • WOOD HCS • Plus • WOOD

HCS • Basic • WOOD HCS • Basic • WOOD

~T101AO ~T101B ~T101BR

HCS • Basic • WOOD HCS • Basic • WOOD HCS • Fast • WOOD

HCS • Fast • WOOD HCS • Fast • WOOD HCS • Fast • WOOD

HCS • Basic • WOOD HCS • Fast • WOOD HCS • Fast • WOOD

HCS • Fast • WOOD HCS • Fast • WOOD HCS • Pro • WOOD

~T111C ~T144D ~T244D

~T144D ~T244D ~T344D

HCS • Pro • WOOD HCS • Pro • WOOD HCS • Ultra • WOOD

HCS • Fast • WOOD HCS • Pro • WOOD HCS • Pro • WOOD

~T119B ~T119BO ~T111C

~T244D ~T344D ~T308B

~T119BO ~T111C ~T144D

~T344D ~T308B ~T308BO

HCS • Pro • WOOD HCS • Ultra • WOOD

~T308B ~T308BO ~T144DP

~T101BR ~T119B ~T119BO

HCS • Plus • WOOD HCS • Plus • WOOD HCS • Basic • WOOD

HCS • Plus • WOOD

3 pcs. ~T101B ~T101BR ~T119B

~T101AO

Confezione Packaging ~T308BO ~T144DP

Cu Zn Ni Ms

Fresata Milled

95x0,7 3¾x36

€ 11,717

SI 1153

23720110

Fresata Milled

95x1 3¾x25

SI 1152

€ 11,717

Alu

Cu Zn Ni Ms

Alu

23720105

Fresata Milled

95x1,8 3¾x14

€ 11,717

SI 1150

23720100

tipo di taglio impieghi finitura applications Type of cut-Finish mm acciaio steel Lxp mm inches x tpi simile a similar to cod. € conf./pack

Metals

Metalli

23720

< 30 < 30 < 15 < 15 < 15

€ 7,365

12 D

ALU

100x3 4x8

Fresata Milled

< 15

Cu Zn Ni Ms

~U127D

Alu

23710115

<6 <6 <6

Fresata Milled

76x2 3x12 BASIC HSS • ALU • METAL HSS • Basic • METAL

HSS

~U234X

Cu Zn Ni Ms

U118B

~U127D € 5,818 ~U118B

Alu

<3 <3 <3

Fresata Milled

76x1,2 3x21

Alu

23710105

HCS • Variable • WOOD HCS • Plus • WOOD HCS • Variable • WOOD

BASIC U118A

HSS • Basic • METAL HSS • Basic • METAL HCS • Variable • WOOD ~U118B € 5,818 ~U118A

HCS • Plus • WOOD HCS • Plus • WOOD ~U234X ~U101D ~U101B

~U234X ~U101D

simile a similar to

Cu Zn Ni Ms

23710100

tipo di taglio impieghi finitura applications Type of cut-Finish mm acciaio steel Lxp mm inches x tpi HCS • Plus HCS Plus •• WOOD WOOD HCS • Plus • WOOD

~U101D ~U101B cod. ~U1AO € conf./pack

Metals

HCS •• Plus Fast •• WOOD WOOD HCS HCS • Basic • WOOD

Metalli ~U144D ~U1AO ~U111D

~U101B ~U1AO ~U144D

HCS • Basic • WOOD HCS • Basic Fast • •WOOD HCS WOOD

~U111D ~U144D ~U111C

Jig saw blades BLACK & DECKER® type for metals

BLA DE ER, RESS, R OBI, S IL,...( )

SEGHETTI BIMETAL CON ATTACCO SPECIALE SIG PER MACCHINE PNEUMATICHE ED ELETTRICHE, SPECIALI PER CARROZZERIA

Compressed-air saw blades

BIM HSS

~T234X ~T144DP

~T144DP ~T308BO

~T144DP ~T308BO ~T308B

~T308BO ~T308B

~T308BO ~T308B ~T344D

~T308B ~T344D

~T308B ~T344D ~T244D

~T344D ~T244D

~T344D ~T244D ~T144D

~T244D ~T144D

~T244D ~T144D ~T111C

~T144D ~T111C

~T144D ~T111C ~T119BO

~T111C ~T119BO

~T111C ~T119BO ~T119B

~T119BO ~T119B

~T119BO ~T119B ~T101BR

~T119B ~T101BR

~T119B ~T101BR ~T101B

~T101BR ~T101B

~T101BR ~T101B ~T101AO

~T101B ~T101AO

~T101AO

Confezione Packaging

HCS • Variable • WOOD HCS • Ultra • WOOD HCS • Pro • WOOD

HCS • Ultra • WOOD HCS • Pro • WOOD

HCS • Ultra • WOOD HCS • Pro • WOOD HCS • Pro • WOOD

HCS • Pro • WOOD HCS • Pro • WOOD

HCS • Pro • WOOD HCS • Pro • WOOD HCS • Fast • WOOD

HCS • Pro • WOOD HCS • Fast • WOOD

HCS • Pro • WOOD HCS • Fast • WOOD HCS • Fast • WOOD

HCS • Fast • WOOD HCS • Fast • WOOD

HCS • Fast • WOOD HCS • Fast • WOOD HCS • Fast • WOOD

HCS • Fast • WOOD HCS • Fast • WOOD

HCS • Fast • WOOD HCS HCS •• Fast Basic• •WOOD WOOD

HCS HCS •• Fast Basic• •WOOD WOOD

HCS HCS •• Fast Basic• •WOOD WOOD HCS • Basic • WOOD

HCS • Basic • WOOD HCS • Basic • WOOD

HCS • Basic • WOOD HCS • Basic • WOOD HCS • Basic • WOOD

HCS • Basic • WOOD HCS • Basic • WOOD

HCS • Basic • WOOD HCS • Basic • WOOD HCS • Plus • WOOD

HCS • Basic • WOOD HCS • Plus • WOOD

HCS • Basic • WOOD HCS • Plus • WOOD HCS • Plus • WOOD

HCS • Plus • WOOD HCS • Plus • WOOD

HCS • Plus • WOOD

5 pcs.

479

~T118GFS ~T318BF ~T118BF ~T318AF ~T318B ~T227D ~T127D ~T123XF ~T118GFS ~T318BF ~T118BF ~T318AF ~T102H ~T227D ~T127D ~T123XF ~T118GFS

BIM • INOX • METAL BIM BIM •• Multi Multi •• METAL METAL BIM • Multi • METAL HSS •• ALU Basic • METAL HSS HSS • ALU •• METAL METAL HSS • Variable • METAL BIM •• Multi INOX••METAL METAL BIM BIM • Multi • METAL BIM ••Multi ••METAL HCS PVC ABRASIVE HSS • ALU • METAL HSS • ALU • METAL HSS • Variable • METAL BIM • INOX • METAL BIM • Multi • METAL BIM • Multi • METAL HSS • ABRASIVE HCS •• PC PVC • ABRASIVE HSS • ALU • METAL

LAME PER SEGHETTI ALTERNATIVI CON ATTACCO BLACK&DECKER® PER LEGNO

Jig saw blades BLACK&DECKER® type for wood and plywood ~T318BF ~T118BF ~T101A ~T102H ~T227D ~T127D ~T123XF

23700 ~T118GFS ~T318BF ~T341HM ~T101A ~T102H ~T227D ~T127D ~T123XF ~T118GFS ~T150RIFF ~T341HM ~T101A ~T102H ~T227D ~T127D ~T123XF ~T113A ~T150RIFF

cod. € conf./pack

HSS • METAL HSS •• ALU Variable • METAL

simile a similar to

HM • Hard Plastics • ABRASIVE HSS •• PC HCS PVC• ABRASIVE • ABRASIVE HSS • ALU • METAL HSS • ALU • METAL HCS • Basic • WOOD HCS • Soft Material • ABRASIVE

~T341HM

HM • ABRASIVE HSS• •Hard PC •Plastics ABRASIVE HCS • PVC • ABRASIVE HSS • ALU • METAL HCS • Basic • WOOD HCS • Basic • WOOD

~T102H ~T227D ~U111D ~U111C

€ 3,020

~T113A ~T150RIFF ~T341HM ~T101A ~T102H ~U144D ~U111D ~U111C ~T113A ~T150RIFF

~T341HM 23700105

~T101A ~U1AO ~U144D ~U111D ~U111C ~T113A ~T150RIFF ~T341HM ~U101B ~U1AO ~U144D ~U111D ~U111C

€ 3,027

~T113A

~T150RIFF 23700110 ~U101D ~U101B ~U1AO € 3,668

~U144D ~U111D ~U111C ~T113A ~U234X ~U101D ~U101B ~U1AO ~U144D ~U111D ~U111C ~U118A ~U234X

23700115 ~U101D

€ 5,944 ~U101B ~U1AO

~U144D ~U111D ~U118B ~U118A ~U234X ~U101D ~U101B

~U1AO ~U144D ~U127D ~U118B ~U118A 23700120 ~U234X ~U101D ~U101B ~U1AO ~U127D ~U118B ~U118A ~U234X

€ 6,408

U111C

tipo di taglio impieghi finitura applications Type of cut-Finish mm

BASIC

100x3 4x8

Fresata Milled

< 50

<5 Ø < 30

< 65

<5 Ø < 50

< 65

<5 Ø < 30

< 15

< 45

< 65

HM • Ceramics • ABRASIVE

HM • Hard Plastics • ABRASIVE HSS • PC • ABRASIVE HCS • PVC • ABRASIVE HCS • Fast Basic• •WOOD WOOD HCS • Basic • WOOD HCS • Soft Material • ABRASIVE HM • Ceramics • ABRASIVE

111D

HM • Hard Plastics • ABRASIVE HSS • PC • ABRASIVE HCS HCS •• Plus Fast •• WOOD WOOD HCS • Basic • WOOD

HCS

BASIC

HCS • Basic • WOOD HCS • Soft Material • ABRASIVE

100x4 4x6

Fresata Milled

HM • Ceramics • ABRASIVE

HM • •Hard Plastics • ABRASIVE HCS HCS • Plus Plus •• WOOD WOOD HCS • Fast • WOOD HCS • Basic • WOOD HCS • Basic • WOOD HCS • Soft Material • ABRASIVE

144D

HM • Ceramics • ABRASIVE

HCS HCS •• Plus Plus •• WOOD WOOD HCS • Plus • WOOD

HCS

FAST

HCS HCS •• Fast Basic• •WOOD WOOD HCS • Basic • WOOD HCS • Soft Material • ABRASIVE HCS • Variable • WOOD HCS • Plus • WOOD HCS • Plus • WOOD HCS • Plus • WOOD HCS • Fast • WOOD HCS • Basic • WOOD HCS • Basic • WOOD HSS• •Variable Basic • •METAL HCS WOOD HCS • Plus • WOOD HCS • Plus • WOOD HCS • Plus • WOOD HCS • Fast • WOOD HCS • Basic • WOOD HSS HSS •• Basic Basic •• METAL METAL HCS • Variable • WOOD

U1AO

HCS • Plus • WOOD HCS • Plus • WOOD HCS • Plus • WOOD HCS • Fast • WOOD HSS • ALU Basic• METAL • METAL HSS • Basic • METAL HCS • Variable • WOOD HCS • Plus • WOOD HCS • Plus • WOOD HCS • Plus • WOOD HSS • ALU • METAL HSS • Basic • METAL

U101B

100x4 4x6

Rettificata Ground HCS

PLUS

76x1,4 3x18

Rettificata Ground HCS

PLUS

100x2,5 4x10

Rettificata Ground HCS

HSS• Variable • Basic • •METAL HCS WOOD

HSS • ALU • METAL HSS • Basic • METAL HSS • Basic • METAL HCS • Variable • WOOD HCS • Plus • WOOD

~U127D ~U118B ~U118A ~U234X

HSS •• ALU HSS Basic• •METAL METAL HSS • Basic • METAL HCS • Variable • WOOD

~U127D 23700130 ~U118A € 9,648

~U118B

HSS • ALU • METAL HSS • Basic • METAL HSS • Basic • METAL

~U127D ~U118B

HSS • ALU • METAL HSS • Basic • METAL

Confezione Packaging ~U127D

HSS • ALU • METAL

HCS • Plus • WOOD HCS • Plus • WOOD HCS • Plus • WOOD

HCS • Plus • WOOD HCS • Plus • WOOD

HCS • Plus • WOOD

HCS • Plus • WOOD HCS • Plus • WOOD HCS • Basic • WOOD

~T101AO

HCS • Plus • WOOD HCS • Basic • WOOD

~T101AO ~T101B

HCS • Basic • WOOD HCS • Basic • WOOD

~T101AO ~T101B ~T101BR

HCS • Basic • WOOD HCS • Basic • WOOD HCS • Fast • WOOD

~T101B ~T101BR ~T119B

HCS • Basic • WOOD HCS • Fast • WOOD HCS • Fast • WOOD

HCS • Fast • WOOD HCS • Fast • WOOD HCS • Fast • WOOD

~T111C ~T144D ~T244D

HCS • Pro • WOOD HCS • Pro • WOOD HCS • Ultra • WOOD

HCS • Fast • WOOD HCS • Fast • WOOD HCS • Pro • WOOD

~T119B ~T119BO ~T111C

~T144D ~T244D ~T344D

HCS • Fast • WOOD HCS • Pro • WOOD HCS • Pro • WOOD

~T119BO ~T111C ~T144D

~T244D ~T344D ~T308B

~T101BR ~T119B ~T119BO

~T344D ~T308B ~T308BO

HCS • Pro • WOOD HCS • Ultra • WOOD HCS • Variable • WOOD

~T308B ~T308BO ~T144DP

~T308BO ~T144DP ~T234X

~U127D

~U234X € 6,408 ~U101D

101D

234X

PLUS

100x4 4x6

Rettificata Ground HCS

ARIABLE

106x2÷3 4x8÷12

Rettificata Ground

Tabella di comparazione Choosing chart odice osch Bosch code D D A

480

acciaio steel

HCS

HCS • Soft Material • ABRASIVE

HCS • Plus • WOOD HCS • Plus • WOOD

3 pcs.

Lxp mm inches x tpi

HM • Ceramics • ABRASIVE

~U101D ~U101B ~U118B 23700125 ~U118A

Mild wood

HSS • ALU • METAL HSS • ALU • METAL HSS • Variable • METAL BIM • INOX ••METAL HM • Ceramics ABRASIVE HM • Hard Plastics • ABRASIVE HSS • PC • ABRASIVE HCS • PVC • ABRASIVE HSS • ALU • METAL HSS • ALU • METAL HSS • Variable • METAL HCS • Soft Material • ABRASIVE HM • Ceramics • ABRASIVE

~T341HM ~T101A ~T102H ~T227D ~T127D ~U111C ~T113A ~T150RIFF ~T101A 23700100

Legno dolce

BIM • INOX • METAL BIM • Multi • METAL HM • ABRASIVE HSS• •Hard PC •Plastics ABRASIVE HCS • PVC • ABRASIVE

D D

Codice Krino Krino code 23700120 23700125 23700100 23700105 23710100 23710105 23710115 23700110 23700115 23700130

BLA DE ER, RESS, R OBI, S IL,...( )

481

LAME PER SEGHETTI A GATTUCCIO CON ATTACCO UNIVERSALE SABRE® PER METALLO Reciprocating blades SABRE® universal type for metals

Metalli

23810

cod. € conf./pack

simile a similar to

Lxp mm inches x tpi

acciaio steel

tipo di taglio impieghi finitura applications Type of cut-Finish mm

BIM HSS BIM • Multi • METAL

~S9 22EF

150x1,4 6x18

S922EF

23810100

€ 9,324

Fresata Milled

Alu

Cu Zn Ni Ms

Ø < 100 Ø < 100

BIM HSS BIM • Multi • METAL

~S1 1 22BF

230x1,8 9x14

S1122BF

23810110

€ 12,316

Fresata Milled

Alu

Cu Zn Ni Ms

Ø < 175 Ø < 175

BIM HSS BIM • V a r ia b le • METAL

~S1 23 X F

150x1,8÷3,2 6x8÷14

S123XF

23810120

€ 9,280

Fresata Milled

Alu

Cu Zn Ni Ms

Ø < 100 Ø < 100

BIM HSS BIM • Str o n g • METAL

~S1 1 26 C H F

230x2,5÷3,2 9x8÷10

S1126CHF

23810150

€ 17,624

Fresata Milled

Alu

< 12

Cu Zn Ni Ms

Ø < 250 Ø < 250

BIM HSS BIM • Str o n g • METAL

~S9 25V F

S925 F

23810160

€ 11,498

EXTREME

150x1,8÷2,6 6x10÷14

Fresata Milled

Alu

< 10

Cu Zn Ni Ms

Ø < 150 Ø < 150

BIM HSS ~S1 1 20 C F

BIM • Str o n g • METAL

S1120CF

23810170

€ 21,183

EXTREME

230x2,5÷3,2 9x8÷10

Fresata Milled

Alu

< 12

Cu Zn Ni Ms

Ø < 175 Ø < 175

BIM HSS ~S9 3 6 BEF

BIM • Lo n g lif e • METAL

150x1,4÷1,8 6x14÷18

S936BEF

23810175

€ 10,621

Fresata Milled

Alu

Cu Zn Ni Ms

Ø < 100 Ø < 100

BIM HSS ~S1 1 3 6 BEF

BIM • Lo n g lif e • METAL

230x1,4÷1,8 9x14÷18

S1136BEF

23810180

€ 14,620

Fresata Milled

Alu

BIM HSS ~S522BF

BIM • Multi • METAL

23810190

€ 17,265

~T101AO HCS • Plus • WOOD

HCS • Basic • WOOD

HCS • Plus • WOOD

~T101B

~T101BR

~T101AO

HCS • Basic • WOOD

HCS • Plus • WOOD

HCS • Basic • WOOD

~T119B

~T101B

HCS • Basic • WOOD

HCS • Fast • WOOD

~T111C

~T119B

~T144D

~T119BO

~T101BR

HCS • Fast • WOOD

HCS • Pro • WOOD

~T144D

~T244D

HCS • Pro • WOOD

HCS • Ultra • WOOD

HCS • Fast • WOOD

~T308B

~T244D

~T344D

~T144DP

~T308BO

482

Confezione Packaging

2 pcs.

S522BF

Ideale con macchine compatte cordless Suitable for compact cordless machines

100x1,8 4x14

Fresata Milled

Cu Zn Ni Ms

Ø < 175 Ø < 175

Metals

LAME PER SEGHETTI A GATTUCCIO CON ATTACCO UNIVERSALE SABRE® PER LEGNO E METALLO Reciprocating blades SABRE® universal type for wood and metals

Legno e Metalli

23815 20

cod. € conf./pack

simile a similar to

Lxp mm inches x tpi

acciaio steel

Wood and Metals

tipo di taglio impieghi finitura applications Type of cut-Finish mm

BIM HSS ~S1 1 22H F

BIM • Multi • W O O D + METAL

230x2,5 9x10

S1122HF

23815100

€ 12,345

Fresata Milled

Alu

< 175

< 12

< 100

< 50

< 100

< 250

< 60

< 250

< 175

< 50

BIM HSS BIM • Str o n g • W O O D + METAL

~S7 1 1 D F

150x4,3 6x6

S 11DF

23815110

€ 9,464

Alu

Fresata Milled

Cu Zn Ni Ms

BIM HSS ~S1411DF

BIM • Strong • WOOD+METAL

300x4,3 12x6

S1411DF

23815115

€ 19,687

Fresata Milled

BIM HSS ~S1 1 22V FR

BIM • P a lle t • W O O D + METAL

S1122 FR

23815130

€ 12,498

NO IBRATIONS

230x1,8÷2,6 9x10÷14

Fresata Milled BIM HSS

~S51 1 D F

BIM • Multi • W O O D + METAL

23815150

€ 17,265

S511DF

Ideale con macchine compatte cordless Suitable for compact cordless machines

100x4,3 4x6

Fresata Milled

~T101AO HCS • Plus • WOOD

HCS • Plus • WOOD

HCS • Basic • WOOD

~T101B

~T101AO

HCS • Basic • WOOD

HCS • Plus • WOOD

HCS • Basic • WOOD

~T101B

~T101BR

HCS • Basic • WOOD

HCS • Fast • WOOD

~T111C

~T119B

~T144D

~T119BO

~T101BR

HCS • Fast • WOOD

HCS • Pro • WOOD

~T144D

~T244D

HCS • Pro • WOOD

HCS • Ultra • WOOD

HCS • Fast • WOOD

~T308B

~T244D

~T344D

~T144DP

~T308BO

Confezione Packaging

2 pcs.

483

LAME PER SEGHETTI A GATTUCCIO CON ATTACCO UNIVERSALE SABRE® PER LEGNO

Reciprocating blades SABRE® universal type for wood and plywood Legno dolce

23800

cod. € conf./pack

simile a similar to

Lxp mm inches x tpi

acciaio steel

Mild wood

tipo di taglio impieghi finitura applications Type of cut-Finish mm

HCS ~S1 6 1 7 K

H C S • Ba s ic • W O O D

300x8,5 12x3

S161

23800100

€ 13,464

Fresata Milled

< 250

< 150

< 60

< 150

< 100

< 60

< 100

< 190

HCS ~S23 4 5X

H C S • V a r ia b le • W O O D

200x2,5÷4,3 8x6÷10

S2345X

23800105

€ 14,606

Fresata Milled HCS

H C S • Be s t • W O O D

~S6 4 4 D

150x4,3 6x6

S644D

23800110

€ 8,639

Fresata Milled HCS

~S1 53 1 L

H C S • Be s t • W O O D

240x5 10x5

S1531L

23800115

€ 11,527

Fresata Milled

Confezione Packaging

odolo H universale 1/2” C S • Be s t • W O O D Universal shank 1/2”

~S1 53 1 L

2 pcs.

Tabella di comparazione Choosing chart odice osch Bosch code

D L

484

Codice Krino Krino code 23810170 23810110 23815100 23815130 23810150 23810180 23810120 23815115 23800115 23800100 23820120

odice osch Bosch code

D D D D D

Codice Krino Krino code 23820130 23800105 23815150 23810190 23820160 23820100 23800110 23815110 23810100 23810160 23810175

AE , ATLAS OP O, BOS H, DE ALT, EL , FESTOOL, HITA HI, MA ITA, METABO, FEIN, FLEX, HILTI, MIL A EE, PORTER ABLE, RID ID, ROTHEN BER ER, R OBI S IL,...( )

LAME PER SEGHETTI A GATTUCCIO CON ATTACCO UNIVERSALE SABRE® PER LEGNO

Reciprocating blades SABRE® universal type for wood and plywood Applicazioni speciali

23820

Special applications

20 L

cod. € conf./pack

simile a similar to

Lxp mm inches x tpi

acciaio steel

tipo di taglio impieghi finitura applications Type of cut-Finish mm

BIM HSS ~S6 28 D F

BIM • P la s te r • ABR ASIV E

S628DF

23820100

€ 11,688 S1543HM

~S1543HM

150x4,3 6x6

Fresata Milled

< 100

Carbide 240x12,7 10x2

on inserti in MD Carbide tip

< 150

HM • Brick • ABRASIVE

S1543HM

23820125

€ 73,548

BIM HSS ~S528 D F

BIM • P la s te r • ABR ASIV E

23820160

€ 17,265

S528DF

Ideale con macchine compatte cordless Suitable for compact cordless machines

100x4,3 4x6

Fresata Milled

< 50

Confezione Packaging

2 pcs.

cod. € conf./pack

~S20 4 1 H M

Lxp mm inches x tpi

acciaio steel

tipo di taglio impieghi finitura applications Type of cut-Finish mm

H M • C o n c r e te • ABR ASIV E

23820120

€ 41,246

~S224 3 H M

simile a similar to

S2041HM

H M • Br ic k • ABR ASIV E

23820130

€ 65,043

S1531L

EXTREME

Carbide 400x8,5 16x3

on inserti in MD Carbide tip

< 350

Carbide 455x12,7 18x2

on inserti in MD Carbide tip

< 365

< 350

< 150

Confezione Packaging

1 pc.

485

LAMA A MANO PER IL TAGLIO DI TUTTI I METALLI Hack saw blades for metal cutting

23001

BIMETAL HSS-CO8% SUPERFLE

Super Flex

HRC 66÷67 HRC 40÷42

Applicazioni

~UNI 4000

Cod.

INOX

Acciaio Steel

Metalli Metals

Alu

Alluminio Aluminum

z n. denti T.p.i.

pcs.

€ cad/each

23001101

300x13x0,65 12”x1/2x0,025

100

2,662

23001100

300x13x0,65 12”x1/2x0,025

100

2,662

23001102

300x13x0,65 12”x1/2x0,025

100

2,662

Applications

Inox Stainless

dimensioni sizes

Caratteristiche: Lama di grandissima ualit con una durezza sui denti di circa 6 gradi Roc well , notevolmente superiore ad una lama tradizionale. Il corpo, pi dolce, garantisce una perfetta essibilit , pur mantenendo una buona rigidit torsionale, per un lavoro preciso e sicuro. ueste caratteristiche permettono un taglio ineguagliabile per dolcezza, rendimento, precisione e durata negli acciai inox, acciai duri legati, acciai da costruzione, leghe leggere, tutti i metalli, etc. Features: High performances, safe and smooth cut in stainless steel, high alloy steel, structural steel, light alloys, metals.

HSS-BIMETAL ~UNI 4000 Cod.

HRC 64 HRC 38÷40

Super Flex

dimensioni sizes

z n. denti T.p.i.

pcs.

€ cad/each

23001110

300x13x0,65 12”x1/2x0,025

100

2,292

23001120

300x13x0,65 12”x1/2x0,025

100

2,292

23001130

300x13x0,65 12”x1/2x0,025

100

2,292

Caratteristiche: Lama super essibile professionale per il taglio degli acciai duri, dolci, tutti i metalli. Features: Shatterproof blades for cutting iron, alloy steel, light alloys, any kind of metal.

HSS ~UNI 4000 Cod.

23001150 HRC 64

Art. 21141 Self Disponibile su richiesta On demand

HIGH CARBON FLE IBLE

Packaging

486

pcs.

100

€ cad/each

2,218

Features: All hard HSS hack saw blades.

~UNI 4000

23001160 Confezione

300x13x0,65 12”x1/2x0,025

z n. denti T.p.i.

Caratteristiche: Lama professionale HSS a tempra integrale per un taglio preciso ad alto rendimento in tutti gli acciai duri, acciai in genere, leghe leggere, metalli.

Cod.

HRC 60

dimensioni sizes

dimensioni sizes 300x13x0,65 12”x1/2x0,025

z n. denti T.p.i.

pcs.

100

€ cad/each

0,521

Caratteristiche: Lama in acciaio da utensile per il taglio occasionale e non professionale di materiali dolci. Features: Carbon flexible hack saw blades for occasional usage.

LAMA A MANO RIVESTITA IN GRANI DI CARBURO DI TUNGSTENO PER IL TAGLIO DEI MATERIALI PIÙ DURI ED ABRASIVI Carbide grit-edge hack saw blades

23010 Cod.

23010060

Confezione Packaging

dimensioni sizes 300x13x0,65 12”x1/2x0,025

pcs.

€ cad/each

7,511

Caratteristiche: Le particelle di carburo di tungsteno sono metallurgicamente e permanentemente legate al corpo in acciaio e permettono il taglio di materiali duri che una normale lama non pu neanche scalfire. Taglio piano e dolce, in entrambe le direzioni in: bulloni, catene, acciai duri trattatati in barre o tubi, ceramica, marmo, granito, gres, fibra di cemento, fibra di vetro, cristallo.

Art. 23011 Self Disponibile su richiesta On demand

Features: Carbide grit particles permanently bounded to alloy steel, designed to cut materials that a standard won t even scratch. Straight cuts in hardened steel, such as chain and bolts, as well as ceramic tile, stranded cable, hydraulic hose and glass.

LAME IN FILO TONDO IN CARBURO DI TUNGSTENO PER TAGLI IN QUALSIASI DIREZIONE DI TUTTI I MATERIALI DIFFICILI DA LAVORARE Carbide grit-edge rod saws

23005 Cod.

dimensioni sizes 300 12”

23005050

Confezione Packaging

pcs.

€ cad/each

7,015

Caratteristiche: Le particelle di carburo di tungsteno sono permanentemente legate al corpo di acciaio e permettono un taglio piano o curvo in tutte le direzioni, anche nelle posizioni inaccessibili ad altri utensili. Taglia in modo dolce e progressivo: Acciaio inox e acciai duri trattati, tutti gli acciai in genere. Bulloni, catene temperate, cavi di trazione eramica, marmo, granito, gres, fibra di cemento etro e cristallo

Art. 23006 Self Disponibile su richiesta On demand

Sostituisce il tagliabulloni, le mole abrasive ed il taglio all’acetilene per molte operazioni Features: Carbide grit particles permanently bounded to alloy steel, designed to cut materials that a standard won t even scratch. Straight cuts in hardened steel, such as chain and bolts, as well as ceramic tile, stranded cable, hydraulic hose and glass.

23012

Lama a mano per seghetti tipo “PUK®” Hack saw blades type “PUK®”

Cod.

23012100

HCS

dimensioni sizes

z T.p.i.

pcs.

150 mm 6”

€ cad/each

0,941

Confezione Packaging Art. 23012 Self Disponibile su richiesta On demand

487

UTENSILI PER MACCHINE AD OSCILLAZIONE

Tools for oscillating machines Pavimento Floor

Costruzioni Buildings

Automotive

Superfici piastrellate Tiled surfaces

Rif. osch ASZ32SC ATZ52SC A

Materiali essibili Flexible materials Residui di mo uette e colla Residues of carpet and glue Legno dolce, legno duro, par uet, vernici e pitture. Softwood, hardwood, parquet, paints

Materiali isolanti Insulating materials Malta per piastrelle Tile mortar ompositi Composites Profili in metalli non ferrosi, lamiere fino a 1 mm Profiles in non-ferrous metals, sheets up to 1 mm

ompensato, truciolato, laminato, pannelli rivestiti in plastica, materiali plastici teneri Plywood, chipboard, laminate, plastic coated panels, soft plastics

Legno duro, compensato, truciolato, par uet, laminato, pannelli rivestiti in plastica. Hardwood, plywood, chipboard, parquet, laminate, plastic coated panels

artongesso, materiali stratificati Drywall, laminated materials

ompositi Composites

Materiali stratificati Multilayer materials

Profili in metallo non ferrosi, chiodi e viti non temprati Non-ferrous metal profiles, nails and screws not hardened

Legno dolce, materiali plastici teneri Soft wood, soft plastic materials

Legno dolce. Softwood Legno duro, compensato, par uet, pannelli rivestiti in plastica, materiali plastici teneri Hardwood, plywood, parquet, plastic coated panels, soft plastics

AII

Legno dolce. Softwood Legno duro, compensato, par uet, pannelli rivestiti in plastica, materiali plastici teneri Hardwood, plywood, parquet, plastic coated panels, soft plastics

AIZ32EPC

Legno dolce. Softwood

Legno duro, compensato, par uet, pannelli rivestiti in plastica, materiali plastici teneri Hardwood, plywood, parquet, plastic coated panels, soft plastics Legno dolce. Softwood

Legno duro, compensato, truciolato, par uet, laminato, pannelli rivestiti in plastica, materiali plastici teneri Hardwood, plywood, chipboard, parquet, laminate, plastic coated panels, soft plastics

artongesso, pannelli in fibra e cemento Drywall, fiber and cement panels

Legno duro, compensato, truciolato, laminato, pannelli rivestiti in plastica Hardwood, plywood, chipboard, laminate, plastic coated panels

artongesso Drywall

Par uet, materiali teneri Parquet, soft materials

Legno duro, compensato, truciolato, laminato, pannelli rivestiti in plastica Hardwood, plywood, chipboard, laminate, plastic coated panels Par uet, materiali teneri Parquet, soft materials

Materiali stratificati, pannelli in fibra e cemento Laminated materials, fiber and cement panels Materiali stratificati Multilayer materials artongesso, pannelli in fibra e cemento Drywall, fiber and cement panels

Materiale sigillante Sealing material

ompositi, Lamiere fino a 1 mm Composites, sheets up to 1 mm Profili in metalli non ferrosi, lamiere fino a 1 mm, chiodi e viti non temprati Profiles in non-ferrous metals, sheets up to 1 mm, nails and screws not hardened ompositi. Composites Lamiere fino a 1 mm, chiodi e viti non temprati. Plates up to 1 mm, nails and screws not hardened ompositi, profili in metalli non ferrosi Composites, profiles in non-ferrous metals

AII

Legno dolce. Softwood Legno duro, compensato, truciolato, par uet,pannelli rivestiti in plastica, materiali plastici teneri Hardwood, plywood, chipboard, parquet, plastic-coated panels, soft plastics

Legno dolce, legno duro, compensato, truciolato, par uet, pannelli rivestiti in plastica, materiali plastici teneri Softwood, hardwood, plywood, chipboard, parquet, plastic-coated panels, soft plastics

artongesso. Drywall Materiali stratificati, pannelli in fibra e cemento Laminated materials, fiber and cement panels

Profili in metalli non ferrosi, lamiere fino a 1 mm, chiodi e viti non temprati Profiles in non-ferrous metals, sheets up to 1 mm, nails and screws not hardened

artongesso, pannelli in fibra e cemento Drywall, fiber and cement panels

alcestruzzo poroso Porous concrete

Materiali stratificati Mulitlayers

ompositi, profili in metalli non ferrosi, lamiere fino a 1 mm, chiodi e viti temprati e non. Composites, profiles in non-ferrous metals, sheets up to 1 mm, hardened and nails and screws

Pannelli in fibra e cemento Fiber and cement panels

ompositi Composites

Malta per fughe (2 3 mm), malta per piastrelle. Mortar for joints (2-3 mm), grout for tiles Piastrelle da parete tenere. Wall tiles

ompositi Composites

Malta per fughe (2 3 mm), malta per piastrelle. Mortar for joints (2-3 mm), grout for tiles

AIZ20AT

ACZ85RT3

ompositi. Composites

artongesso Drywall

Residui di mo uette e colla Residues of carpet and glue

Pannelli in fibra e cemento Fiber and cement panels artongesso Drywall

Pannelli in legno Wood panels

In nero le applicazioni ottimali, in blu le applicazioni adatte. The recommended applications in black, the basic applications in blue color. 488

Piastrelle da parete tenere. Wall tiles Malta per fughe (2 3 mm), malta per piastrelle. Mortar for joints (2-3 mm), grout for tiles Piastrelle da parete tenere. Wall tiles

ACCESSORI PER UTENSILI MULTIFUNZIONE AD OSCILLAZIONE Accessories for multi-function oscillating tools

23405 cod.

Legno

ATTACCO STARLOCK®

Wood

Starlock® tools ri

osch

materiale material

dimensioni dimensions

caratteristiche features 1,8mm 1,8mm 1,8mm

AIZ32BSPB

23405100

€ 28,055

AIZ32BSPC

23405105

HCS Curved TECH

1,8mm 1,8mm

Starlock •• Starlock Starlock Starlock •• Starlock PlusPlus ••• Starlock Starlock Plus Starlock Plus • Starlock Max MaxMax • Legno Starlock duro, multistrato, plastica Starlock ••• StarlockCurved-Tec Max Hard wood, plywood, plastic Standard Curved-Tec Standard *Altri/Others *Altri/Others Precision *Altri/Others •••• Precision *Altri/Others

1,8mm 1,8mm

14 tpi

1,8mm 1,8mm

Starlock Plus Starlock Starlock Max Max *Altri/Others *Altri/Others

Legno dolce, multistrato, plastica (es. taglio dal centro in legno massivo • Starlock Starlock Starlock ••• per montaggio di una griglia Starlock di aerazione). Starlock Plus • Curved-Tec Standard Starlock Plus ••• Curved-Tec Standard Starlock Plus Starlock Plus Soft wood, plywood, plastic Precision Precision Starlock Max (eg center cut inStarlock massive wood Starlock MaxMax •••• Starlock Max grid). for mounting an*Altri/Others aeration •

1,8mm 1,8mm

14 tpi

*Altri/Others Standard Curved-Tec *Altri/Others ••• Curved-Tec Standard *Altri/Others Precision

Precision

€ 21,676

Bimetal Curved TECH

•• •• •• ••

impieghi Starlock Starlock applications Starlock Plus

Legno dolce, multistrato, plastica Starlock Starlock •• (es. taglio dal centro in Plus legno massivo per montaggio di una Starlock Max • Plus • griglia Starlock di aerazione). Curved-Tec Standard Curved-Tec Standard *Altri/Others • Soft wood, plywood, plastic Precision Precision Starlock Max • (eg center cut in massive wood for mounting an aeration grid).

1,8mm

AII65BSPC Flat onvex

23405110

€ 27,039

HCS Curved TECH

1,8mm

14 tpi

Curved-Tec *Altri/Others Curved-Tec Precision Precision

AI 32EP

23405115

€ 21,676

HCS Curved TECH

•

Starlock

65m

Standard • Standard

Legno dolce, plastica Curved-Tec Standard (es. taglio dal centro in legno massivo Precision Starlock • per montaggio di una griglia di aerazione). Starlock Plus • Soft wood, plastic (eg center cut in massive wood for mounting an Starlock Max • aeration grid).

1,4 mm

1,8mm

18 tpi

Curved-Tec

*Altri/Others Precision

Standard

•

Confezione Packaging

Tabella di comparazione Choosing chart odice osch Bosch code

Codice Krino Krino code

A ACZ85RT3 AII AP AII P AI A AIZ20AT AI A AI AP

23410100 23415100 23410115 23405110 23410105 23410125 23410120 23410110

odice osch Bosch code AI P AI P AIZ32EPC ASZ32SC ATZ52SC A R A R A

Codice Krino Krino code 23405100 23405105 23405115 23400100 23400105 23415105 23415115 23400110

Starloc , Starloc Plus, Starloc Max, Milwau ee, Fein, ra sman, Ridgid, Einhell, estfalia, hicago Electric, ( )... Dremel, Dewalt, B D, Porter able, Roc well, orx, Multi2pro, Mastercra ( ) c

Curved-Tec Precision

Standard

489

A RI ACCESSORIES

1 pc.

Per macchine multifunzione T

•

Starlock

ACCESSORI Starlock Plus PER UTENSILI MULTIFUNZIONE AD •OSCILLAZIONE Accessories for multi-function oscillating tools Starlock Max •

23410

*Altri/Others ATTACCO STARLOCK®

alu

•

Legno, metallo, plastiche

Starlock tools

cod.

osch

Starlock

materiale material

Starlock Max *Altri/Others

Curved-Tec Precision

caratteristiche features

impieghi applications

1,8mm

BIM

Starlock Plus

*Altri/Others

Ø 85 mm

Bimetal

• • • •

Starlock

Starlock Max

alu

Standard

ACZ85EB

€ 36,922

dimensioni dimensions

• • • •

Starlock Plus

23410100

Wood, metal, plastics

plastics

Legno duro plastics Hard wood

Parquet, multistrato s<20 mm, plastica epossidica. Tagli troncati e tagli dal centro, anche per tagli vicino ai bordi, negli angoli e in settori difficilmente accessibili (es. tagli di zoccolini già montati oppure telai delle porte). Parquet, plywood s <20 mm, epoxy plastic. Truncated cuts and cuts from the center, also for cuts near the Starlock • edges, in the corners and in sectors that are difficult to access (eg cuts of assembled skirting boards or door frames).

Starlock Plus

Curved-Tec Starlock Max Precision

1,8mm

• • •

Standard

*Altri/Others

• Starlock Plus Bimetal • Legno duro Curved-Tec Standard Precision • Hard wood AIZ20AB BimetalStarlock Max1,3 mm *Altri/Others 19 tpi • 1,8mm

23410105

€ 16,483

Starlock

• • • •

Starlock Starlock Plus Starlock Max *Altri/Others AIZ32APB

1,8mm Bimetal Bimetal Legno duro Curved TECH 19 tpi wood Hard 40 40 m m m

Starlock Starlock Starlock Plus Starlock Plus Starlock Max Starlock Max 23410115 Starlock *Altri/Others € 34,380 *Altri/Others Starlock Plus Starlock Max *Altri/Others

Starlock • •• Starlock Plus • •• Starlock Max • Curved-Tec Standard •• *Altri/Others • Precision Bimetal plastics •AII65APB Curved TECH •• Flat • • •

TC - HM

TC - HM € 24,950 TC - HM

Curved-Tec Precision 23410125

€ 37,751

490

Bimeta

plastics

• Starlock Plus • Wood with nails, hardwood, insulating sandwich, aluminum, epoxy plastic (eg cuts of door frames, cuts Starlock Curved-Tec Standard in coatedStarlock panels, pipe cuts in non-ferrous material and Max •• Precision small profiles). Starlock Plus • Starlock • Curved-Tec Standard *Altri/Others • Starlock Max • Precision

plastics

Bimeta

1,8mm

Legno con chiodi, legno duro, sandwich isolanti, alluminio, plastica epossidica (es. tagli di telai di porte, tagli in pannelli rivestiti, tagli di tubi in materiale non ferroso e profili di piccole dimensioni).

Starlock

Starlock Plus *Altri/Others Starlock Max

1,8mm

*Altri/Others

Bimetal 1,8 mm

Legno duro Hard wood

Wood with nails, hardwood, insulating sandwiches, epoxy plastic (eg cuts of door frames, openings for a shelf). Curved-Tec Standard

•

Precision Standard Curved-Tec Starlock Plus • Curved-Tec Standard Precision

1,8mm

Bimeta

• • • •

Legno con chiodi, legno duro, sandwich isolanti, plastica epossidica (es. tagli di telai di porte, aperture per un ripiano).

Starlock

14 tpi

Bimetal

• • • •

Standard •

Starlock Max Precision

*Altri/Others

x 30

• •

Bimeta

Bim

Bimeta

Alu

TC - HM

TC - HM TC - HM 23410120

Starlock Max Starlock Plus Curved-Tec *Altri/Others Starlock Max Precision

65m m 65m m

Bimetal

Bimetal Bimetal

Wood with nails, hardwood, plasterboard, epoxy plastic, Pluscuts, paneled cuts, • insulating sandwichesStarlock (eg door frame Starlock • non-ferrous pipe cuts and small profiles).

Alu

€ 28,055

Legno con chiodi, legno duro, cartongesso, plastica epossidica, sandwich isolanti (es. tagli di telai di porte, tagli in pannelli rivestiti, tagli di tubi in materiale non ferroso e profili di piccole Starlock • dimensioni).

*Altri/Others

1,3 mm

23410110

Alu

1,8mm

alu

Bimeta

Vita utile - Life cycle

Bimetal Bimetal

30 xx30

VitaAIZ32AB utile--Life LifeBIM cycle Vita utile cycle

Standard

AIZ20AT

Bimetal

TC/HM

1,3 mm 1,8mm

20 m

19 tpi m m 20 m 40 m 20 m m 40 m m

Legno duro Hard wood

• Starlock Plus • Wood with nails, aluminum, epoxy plastic, insulating sandwiches (eg cuts of door frames, cuts in coated panels, Starlock Max • pipe cuts in non-ferrous material and small profiles). *Altri/Others • Curved-Tec Standard Starlock

Legno con chiodi, alluminio, plastica epossidica, sandwich isolanti (es. tagli di telai di porte, tagli in pannelli rivestiti, tagli di tubi in materiale non ferroso e profili di piccole dimensioni). 40

Precision

1,1 mm

Bimeta

INOX

Legno con chiodi, metallo con HRC 40÷50, acciaio inox, polimeri rinforzati con fibre.

1,1 mm 1,1 mm

23 tpi

Wood with nails, metal with HRC 40÷50, stainless steel, polymers reinforced with fibers.

Curved-Tec Precision

Standard

Bim

• • *Altri/Others • Starlock Plus ACCESSORI • Starlock MaxMULTIFUNZIONE PER UTENSILI AD OSCILLAZIONE

Starlock

23410125 23410125 AIZ20AT AIZ20AT TC TC HM HM Accessories for multi-function • oscillating tools *Altri/Others

rivestiti, rivestiti, ttagli agli ddi i ttubi ubi in in mmateria ateri ferroso ferroso ee p profili rofili ddi i ppiccole iccole ddime im

Bimetal

TC - HM

Starlock ATTACCO STARLOCK TC - HM

23415

plastics x 30 Bimetal

Materiali Abrasivi

Vita•utile - Life cycle

Starlock® tools Starlock Plus

• Starlock • Starlock Max cod. rimm osch materiale • dimensioni caratteristiche impieghi m ≤ 2,5 20 m 0m Starlock Plus • m 4 material dimensions features applications MATERIALI MATERIALI AA RASIVI RASIVI ––abrasives abrasives ((rimozione rimozione ddelle elle ffughe) ughe) (routing, (routing, rrasping) asping) *Altri/Others • 23415100 23415100 ACZ ACZ 5RT3 5RT3• TC TC HM HM• Max Starlock Starlock Starlock •

•

• AIZ20AT AIZ20AT •

*Altri/Others Starlock Plus

TC - HM

Starlock Max 23410125 23410125

Starlock Plus Starlock Max

plastics

TC TC HM HM

*Altri/Others

Bimetal

• • •

rivestiti, rivestiti, ttagli agli ddi i ttubi ubi in in mmateria ateri ferroso ferroso ee p profili rofili ddi i ppiccole iccole ddime im plastics

• Starlock

*Altri/Others

1,1 mm

Legno Legno cAbrasives con on cchiodi, hiodi, mmetallo etallo ccon on 40 40 50, 50, aacciaio cciaio ino ino , , ppolimeri olimeri rri con con fibre fibre

Ø 85 mm

Bimetal

x 30

• plastics Vita•utile - Life cycle Ø 85• mm Carbide 30 • TC - HM

TC≤ 3- mm HM Starlock Plus

≤ 2,5 mm

Mattoni Mattoni ee c cemento, emento, ppiastrelle, iastrelle

Mattoni e cemento, piastrelle, plastica epossidica Legno Legno ccon on c(es. c(es. hiodi, hiodi, mmetallo etallo fcugh on epossidica epossidica rrimuovere imuovere fcon ugh (es. rimuovere fughe tra piastrelle, tagliare cavità in piastrelle, pannelli di gesso o 40 plastiche 40 50, 50, arinforzate). acciaio cciaio ino inoc, cavit , pavit polimeri olimeri riri piastrelle, piastrelle, ttagliare agliare i n in ppia

Starlock •• Max Starlock Starlock TC - HM Bricks and cement, tiles, epoxycon plastics con fibre fibreddi i ggesso pannelli pannelli esso oo p plastiche lastiche ACZ85RT3 TC/HM 23415100 m (eg removing joints between tiles, cutting tile cavities, *Altri/Others • Starlock Plus m 2 0 0m € 52,203 rinforzate). rinforzate). • Starlock Plus ≤ 3 mm m 4 gypsum boards or reinforced plastics). MATERIALI MATERIALI AA RASIVI RASIVI ––abrasives abrasives ((rimozione rimozione ddelle elle ffughe) ughe)(routing, (routing, rrasping) asping) 23415105 23415105 AVZ 0RT4 0RT4 •TC TC HM HM TCAVZ - HM Starlock Max 23415100 23415100 ACZ ACZ 5RT3 5RT3 TC TC HM HM • Starlock Max Starlock • Malta, Malta, rresidui esidui ddi i ccalcestruzzo, alcestruzzo, legno, legno, • *Altri/Others Starlock Plus Starlock • 1,1 mm • • *Altri/Others materiali materiali aabrasivi brasivi ((es. es. rrimozione imozione ddi i Ø 85 mm

TC - HM

•

Starlock Max

Bimetal

Carbide 30

malta malta oo c colla olla pper er ppiastrelle, iastrelle, rrimozione imozione • • di di r r esidui esidui d d i i c c olla olla p p er er m m oquette). oquette). Bimetal x 30 TC - HM Ø 70 mm Carbide Starlockllevigare, Max • 40 llucidare) MULTIMATERIALE MULTIMATERIALE –– multitasking multitasking ( ( tagliare, tagliare, evigare, rraschiare, aschiare, ucidare) (sawing, (sawing, sscraping, craping, r r Mattoni Mattoni ess e anding c anding cemento, emento, po po iastrelle, iastrelle TC - HM Vita utile - Life cycle Mattoni ee c cemento, emento, ppiastrelle, iastrelle Mattoni e cemento, piastrelle,Mattoni plastica epossidica epossidica epossidica (es. (es. r r imozione imozione ddi i ccoo *Altri/Others • (es. rimozione di colla per piastrelle e malta (es. per polishing) polishing) epossidica epossidica (es. rrimuovere imuovere fugh fugh

Starlock Plus

*Altri/Others

plastics

≤ 2,5 mm

23400100 23400100

ASZ32SC ASZ32SC

HCS HCS Lama Lama AVZ70RT4 TC/HM 23415105 23415115 23415115 AVZ AVZ RT2 RT2 TC TC HM HM € 73,301 (Multi (Multi kknife) nife) TC 23415105 23415105 AVZ 0RT4 0RT4 TC TC HM HM TC -- HM HM AVZ

piastrelle piastrelle ee m malta alta pper er fughe, fughe, rra fughe, raspatura e levigatura di superfici dure).

Ø 70 mm

Carbide 40

TC - HM

20 m

m 40

piastrelle, piastrelle, ttagliare agliare ccavit avit i n in ppiai

e levigatura levigatura ddi i ssuperfici uperfici ddure). ure). Bricks and cement, tiles, epoxye plastic (eg tile glue pannelli pannelli i i ggesso esso oo p plastiche lastiche and grout removal, buffing and sanding ofddhard surfaces). rinforzate). rinforzate).

plastics Ø 85 mm

1,1 mm

23400105 23400105

23400110 23400110

ATZ52SC ATZ52SC

HCS HCS Raschietto Raschietto (Rigid (Rigid sscraper) craper)

AVZ93G AVZ93G

23415115

€ 42,393 23415115 23415115

Platorello Platorello pper er ccarte arte abrasive abrasive AVZ78RT2 TC/HM (Sanding PTC Plate late ffor or ddelta elta AVZ AVZ (Sanding RT2 RT2 TC HM HM sanding sanding ppaper) aper)

Bimetal

78 mm

78 mm Legno duro Hard wood Carbide 20 Carbide 20

Moquette, Moquette, m malta, alta, eccealcestruzzo, ciastrelle colla olla Mattoni Mattoni calcestruzzo, cemento, emento, ppiastrelle,

Malta, residui di calcestruzzo, legno, materiali per per pdi piastrelle. iastrelle. epossidica epossidica (es. (es. rrimozione imozione ddi i ccoo abrasivi (es. rimozione malta o colla per piastrelle, rimozione di residui di colla per moquette).ee m piastrelle piastrelle malta alta pper er fughe, fughe, rra

Mortar, residues of concrete, wood, abrasive materials e e levigatura levigatura ddi i ssuperfici uperfici ddure). ure). (eg removal of mortar or tile adhesive, removal of residues of glue for carpet).

Levigatura Levigatura ddi i ssuperfici uperfici ppiane iane ssui ui bbordi, ordi, negli negli aangoli ngoli oo i n in ssettori ettori ddifficilmente ifficilmente accessibili accessibili ((es. es. levigare levigare legno, legno, ppittura, ittura, vernice, vernice, ppietra, ietra, ddisossidare isossidare m metalli, etalli, asportare asportare vvernici). ernici).

Confezione Packaging

1 pc.

Kit per piastrelle

Moquette, Moquette, ttappeti, appeti, ccarta arta ccatramata, atramata, prato prato ssintetico, intetico, ccartone, artone, ttutti utti i i materiali materiali tteneri eneri ee a abrasivi brasivi fflessibili. lessibili.

Carbide 30

Kit per pavimenti e installazioni

Tile set

Flooring set

Art. 23430100

€ 92,660

omposizione

Art. 23430101

€ 70,977

omposizione

Description 4 pcs

Art. 23415100 Art. 23400105 Art. 23415115 Art. 23410105

Art. 23410100 Art. 23400105 Art. 23405115 Art. 23405100

491

ACCESSORI PER UTENSILI MULTIFUNZIONE AD OSCILLAZIONE AccessoriesStarlock for multi-function• oscillating tools Starlock •

23400

Starlock Plus •• Starlock Plus ® ATTACCO STARLOCK *Altri/Others *Altri/Others

cod.

•• ••

Starlock Max Starlock Starlock Max® tools ri

osch

Multimateriale

Multitasking

materiale material

dimensioni dimensions

caratteristiche features

impieghi applications Starlock

Starlock

•

Starlock Plus

• •

Starlock Max

Starlock Plus 1,8mm

mm 24 mm 24

Starlock Max *Altri/Others

• • • •

Malta, Malta, Malta, rresidui residui esidui ddd i i ci calcestruzzo, calcestruzzo, alcestruzzo, llegno, egno, legno, materiali materiali materiali a a brasivi a brasivi brasivi ( ( es. es. ( es. r r imozione r imozione imozione ddd i i i *Altri/Others • Malta, esidui calcestruzzo, alcestruzzo, egno, Malta, rprpesidui llegno, residui ddi di ci calcestruzzo, malta malta malta ooo cc Malta, olla colla olla ppp er er er p iastrelle, iastrelle, iastrelle, rrimozione rimozione imozione legno, materiali abrasivi brasivi (es. es. rimozione imozione materiali a ( r materiali a brasivi ( es. r imozione ddi di i HCS di di di rresidui residui esidui d i i ci colla colla olla ppp er er er m mm oquette). oquette). oquette). Moquette, tappeti,ddcarta catramata, prato sintetico, malta o c olla p er p iastrelle, r imozione Lama HCS malta o c olla p er p iastrelle, r imozione malta o c olla p er p iastrelle, r imozione cartone, tutti i materiali teneri e abrasivi essibili. HCS MULTIMATERIALE MULTIMATERIALE MULTIMATERIALE –––multitasking multitasking multitasking ((tagliare, (tagliare, tagliare, evigare, evigare, levigare, rraschiare, raschiare, aschiare, llucidare) ucidare) lucidare)(sawing, (sawing, (sawing, ssscraping, craping, craping, ssdsanding omo omr r soft r oquette). Multillknife ASZ32SC 23400100 di esidui colla olla per er di rresidui danding i ci cardboard, colla m oquette). residui i danding pper oquette). Carpet, tar paper,di synthetic grass, all 511 2 mmm mm 11 m

m 26

€ 35,429

materials and flexible abrasives. polishing) polishing) polishing) MULTIMATERIALE –––multitasking multitasking ((tagliare, (tagliare, tagliare, levigare, evigare, rraschiare, raschiare, aschiare, lucidare) ucidare) (sawing, sscraping, scraping, craping, ssanding sanding anding ooor r r MULTIMATERIALE multitasking llevigare, llucidare) (sawing, MULTIMATERIALE (sawing, Curved-Tec Standard Bimeta 23400100 23400100 23400100polishing) ASZ32SC ASZ32SC ASZ32SC HCS HCS HCS polishing) Starlock polishing) Precision •

23400100 23400100 23400100

Lama Lama Lama ASZ32SC HCS ASZ32SC HCS ASZ32SC HCS (Multi (Multi knife) nife) Starlock(Multi Pluskknife) Lama • Lama Lama (Multi knife) (Multi kknife) Starlock Max (Multi •nife)

*Altri/Others • 23400105 23400105 23400105 ATZ52SC ATZ52SC ATZ52SC HCS HCS HCS Raschietto Raschietto Raschietto HCS 23400105 ATZ52SC HCS 23400105 ATZ52SC HCS 23400105 ATZ52SC HCS Raschietto (Rigid (Rigid (Rigid sscraper) scraper) craper) Raschietto Raschietto Raschietto ATZ52SC Rigid scraper 23400105 (Rigid scraper) craper) € 16,483 (Rigid (Rigid sscraper)

23400110 23400110 23400110

Platorello Platorello Platorello ppp er er er ccarte carte arte abrasive abrasive abrasive 23400110 AVZ93G Platorello per er carte arte 23400110 AVZ93G Platorello 23400110 AVZ93G Platorello pper ccarte (Sanding (Sanding (Sanding PP••P late late late ffor or for ddd elta elta elta Starlock Starlock abrasive abrasive abrasive sanding sanding sanding ppp aper) aper) aper) (Sanding Plate late or delta elta ffor Starlock ••(Sanding (Sanding PPlate for ddelta StarlockPlus Plus sanding paper) aper) sanding sanding ppaper) Starlock •• StarlockMax Max Platorello per

Moquette, Moquette, Moquette, ttappeti, appeti, tappeti, ccarta carta arta ccatramata, catramata, atramata, prato prato prato ssintetico, sintetico, intetico, ccartone, cartone, artone, ttutti utti tutti ii i Moquette, appeti, carta arta catramata, atramata, Moquette, ttappeti, Moquette, tappeti, ccarta ccatramata, materiali materiali materiali tteneri eneri teneri ee e aa brasivi abrasivi brasivi fflessibili. lessibili. flessibili. prato sintetico, intetico, cartone, artone, utti prato ttutti prato ssintetico, ccartone, tutti i ii materiali eneri abrasivi brasivi lessibili. materiali tteneri fflessibili. materiali teneri ee ea abrasivi flessibili.

HCS

Mo uette, malta, calcestruzzo, colla per piastrelle. Moquette, Moquette, Moquette, m mm alta, alta, alta, ccalcestruzzo, calcestruzzo, alcestruzzo, ccolla colla olla Carpet, mortar, concrete, tile adhesive per per per ppp iastrelle. iastrelle. iastrelle.

Moquette, m alta, calcestruzzo, alcestruzzo, colla olla Moquette, alta, Moquette, mm alta, ccalcestruzzo, ccolla per piastrelle. iastrelle. per per ppiastrelle.

AVZ93G AVZ93G AVZ93G

*Altri/Others *Altri/Others

••

AVZ93G

23400110

€ 19,475

carte abrasive Sanding Plate for delta sanding paper

93 mm 93 mm

HCS

Levigatura Levigatura Levigatura ddd i i si superfici superfici uperfici ppp iane iane iane ssui sui ui bbb ordi, ordi, ordi, negli negli negli aangoli angoli ngoli ooo iin n in ssettori settori ettori ddd ifficilmente ifficilmente ifficilmente Levigatura superfici uperfici piane iane sui ui bordi, ordi, Levigatura di superfici piane suidbordi, negli angoli o ssui Levigatura di di si superfici Levigatura ppiane bbordi, accessibili accessibili accessibili ((es. es. (es. llevigare evigare levigare llegno, egno, llevigare egno, ppp ittura, ittura, ittura, in settori difficilmente accessibili (es. legno, negli angoli ngoli iin n settori ettori difficilmente ifficilmente negli angoli o oi n settori difficilmente negli a o s d pittura, vernice, p pietra, disossidare metalli, asportare vernice, vernice, vernice, pp ietra, ietra, ietra, ddd isossidare isossidare isossidare m mm etalli, etalli, etalli, accessibili es. evigare egno, pittura, ittura, accessibili ((es. llevigare llegno, accessibili (es. levigare legno, ppittura, vernici). asportare asportare asportare vvernici). vernici). ernici). vernice, p ietra, d isossidare m etalli, vernice, p ietra, d isossidare m etalli, vernice, pietra, disossidare metalli, Sanding flat surfaces on edges, corners or in sectors that are difficult to access (eg sanding wood, asportare vernici). ernici). asportare asportare vvernici). painting, varnish, stone, deoxidising metals, removing varnishes).

Confezione Packaging

A RI ACCESSORIES

1 pc. Per Per utilizzi utilizzi piani piani

Velocità Velocità basse basse Low Low speed speed

Carte abrasive per legno/vernici Abrasive paper for wood/paint Art. 23529026

492

Abrasive paper for wood/metal Art. 23529027

€ conf./pack 7,409 20 pcs

Carte abrasive per legno/metallo

€ conf./pack 7,844 90 mm

20 pcs

90 mm

ACCESSORI PER UTENSILI MULTIFUNZIONE AD OSCILLAZIONE UNIVERSAL QUICK CHANGE

Universal Quick Change accessories for multi-function oscillating tools

23505

ATTACCO UNVERSALE

cod.

osch

Legno

UICK CHANGE

Universal QUICK CHANGE

materiale material

Wood

dimensioni dimensions

impieghi applications

H=40

AI 32BSP

23505105

€ 7,941

P=1,8

HCS

P=1,8

L=34

14 tpi

H=54

H=54 P=1,8

AII65BSP

23505110

€ 8,684

P=1,8

L=65

HCS

14 tpi

h=40

AI 32EP

23505115

€ 6,287

P=1,4

HCS

L=34

H=40 Legno dolce, multistrato, plastica (es. taglio dal centro in legno massivo per montaggio di una griglia di aerazione). L=34 Softwood, plywood, plastic (eg center cut in massive wood for mounting an aeration grid).

P=1,4

19 tpi

LegnoL=65 dolce, multistrato, plastica (es. taglio dal centro in legno massivo per montaggio di una griglia di aerazione). Softwood, multilayer, plastic (eg center-cut in massive wood for mounting an aeration grid).

h=40 Legno dolce, plastica (es. taglio dal centro in legno massivo per montaggio di una griglia di aerazione). L=34 Softwood, plastic (eg cut from the center in massive wood to fit an aeration grid).

Confezione Packaging

1 pc.

GUIDA ALL’USO DEGLI UTENSILI PER MACCHINE AD OSCILLAZIONE

Guide to the use of tools for oscillating machines Si raccomanda l’uso delle lame per utensili multifunzione con una lieve pressione. La dentatura è appositamente studiata per fornire un’operazione di taglio senza sforzo e con ottima finitura. Nel caso si esercitasse una pressione eccessiva il prodotto potrebbe perdere prematuramente il filo tagliente oppure potrebbe surriscaldarsi eccessivamente, perdendo di conseguenza capacità tagliente. The use of oscillating tools with light pressure is recommended. The tooth set is specially designed to provide a cutting operation effortlessly and with excellent finish. If excessive pressure is exerted, the product may prematurely lose the cutting edge or it may overheat excessively, thus losing its cutting capacity.

493

ACCESSORI PER UTENSILI MULTIFUNZIONE AD OSCILLAZIONE UNIVERSAL QUICK CHANGE

Universal Quick Change accessories for multi-function oscillating tools

23510

ATTACCO UNVERSALE Universal QUICK CHANGE

cod.

osch

Legno, metallo, plastiche

UICK CHANGE

materiale material

Wood, metal, plastics

dimensioni dimensions

impieghi applications

Par uet, multistrato s<20 mm, plastica epossidica. Tagli troncati e tagli dal centro, anche per tagli vicino ai bordi, negli angoli e in settori difficilmente accessibili (es. tagli di zoccolini gi montati oppure telai delle porte). Parquet, multilayer s <20 mm, epoxy plastic. Truncated cuts and cuts from the center, also for cuts near the edges, in the corners and in sectors that are difficult to access (eg cuts of assembled skirting boards or door frames).

88 mm

23510100

€ 17,660

85EB

BIM

H=68 P=1,3

AI 20AB

23510105

€ 11,672

P=1,3

L=44

19 tpi

BIM

H=68 Legno con chiodi, legno duro, cartongesso, plastica epossidica, sandwich isolanti (es. tagli di telai di porte, tagli in pannelli rivestiti, L=44 tagli di tubi in materiale non ferroso e profili di piccole dimensioni). Wood with nails, hardwood, plasterboard, epoxy plastics, insulating sandwiches (eg cuts of door frames, cuts in coated panels, pipe cuts in non-ferrous material and small profiles).

H=54

AII65APB

23510115

€ 8,231

P=1,8

HCS

P=1,8

L=65

14 tpi

L=65

Legno dolce, plastica. Soft wood, plastics.

Alu

H=40 P=1,3

AI 32AB

23510120

€ 10,629

BIM

P=1,3

L=34

19 tpi

H=53

AI 32BSPB

23510125

€ 10,587

BIM

L=28,5

P=1,8

14 tpi

Confezione Packaging

1 pc.

494

P=1,8

Legno con chiodi, alluminio, plastica epossidica, sandwich isolanti (es. tagliH=40 di telai di porte, tagli in pannelli rivestiti, tagli di tubi in materiale non ferroso e profili di piccole dimensioni). L=34 Wood with nails, aluminum, epoxy plastic, insulating sandwiches (eg cuts of door frames, cuts in coated panels, pipe cuts in non-ferrous material and small profiles).

L=28,5

Legno duro, multistrato, plastica. Hardwood, multilayer, plastic.

ACCESSORI PER UTENSILI MULTIFUNZIONE AD OSCILLAZIONE UNIVERSAL QUICK CHANGE

Universal Quick Change accessories for multi-function oscillating tools

23515

ATTACCO UNVERSALE Universal QUICK CHANGE

cod.

23515100

€ 12,871

€ 11,672

materiale material

85RT3

23515105

23500

osch

Universal QUICK CHANGE

cod.

osch

€ 5,873

Mattoni e cemento, piastrelle, plastica epossidica (es. rimuovere fughe tra piastrelle, tagliare cavit in piastrelle, pannelli di gesso o plastiche rinforzate). L=78 Bricks and cement, tiles, epoxy plastics (eg to remove joints between tiles, cut tile cavities, gypsum boards or reinforced plastics).

Mattoni e cemento, piastrelle, plastica epossidica (es. rimozione di colla per piastrelle e malta per fughe, raspatura e levigatura L=63,5 di superfici dure). Bricks and cement, tiles, epoxy plastics (eg tile glue and grout removal, buffing and sanding of hard surfaces).

L=63,5

Multimateriale

UICK CHANGE

materiale material

HCS Raschietto Rigid scraper

AT 52S

23500105

impieghi applications

L=78

TC/HM

ATTACCO UNVERSALE

Abrasives

dimensioni dimensions

TC/HM

0RT4

Materiali Abrasivi

UICK CHANGE

Multitasking

dimensioni dimensions

Mo uette, malta, calcestruzzo, colla per piastrelle. Carpet, mortar, concrete, tile adhesive.

L=30,5

80 mm

Platorello per carte abrasive

23500110

€ 6,742

23529

Sanding Plate for delta sanding paper

ATTACCO UNVERSALE Universal QUICK CHANGE

impieghi applications

Speed Max 2/3

80 mm

Speed

Max 2/3 UICK CHANGE

80 mm

Art. 23530100 Speed € 38,927 Max 2/3

Art. 23529010

€ 0,753

Levigatura di superfici piane sui bordi, negli angoli o in settori difficilmente accessibili (es. levigare legno, pittura, vernice, pietra, disossidare metalli, asportare vernici). Smoothing flat surfaces on edges, in corners or in sectors that are difficult to access (eg sanding wood, painting, varnish, stone, deoxidising metals, removing painting).

Art. 23530101

€ 53,593

Adattatore per macchine Dremel Adapter to fit Dremel machine

omposizione

Art. 23529015

Description 4 pcs

Description pcs

Adattatore per macchine Bosch (non Starloc ) Adapter to fit osch (non Starlock ) machine

Art. 23505115 Art. 23500105 Art. 23510100 Art. 23500110

Art. 23510115 Art. 23505115 Art. 23510120 Art. 23500105 Inox Art. 23515105 Art. 23510100 HCS Art. 23500110

€ 0,753

Art. 23529020 € 6,964 20pcs arte abrasive per legno/vernici Abrasive paper for wood/paint Art. 23529025 20pcs

€ 7,586

arte abrasive per legno/metallo Abrasive paper for wood/metal

80 mm

Speed Max 2/3 80 mm

Speed Max 2/3

495

496

UTENSILI PER EDILIZIA CONSTRUCTION TOOLS

497

VISIONE D'INSIEME: PUNTE PER MURO CON CODOLO CILINDRICO

MAX4

SDD UNIVERSALE

SUPERIOR

STANDARD PLUS STANDARD PLUS

STANDARD STANDARD

SHANK

IMAGE

DESCRIPTION

SPECIALI MATERIALI EDILI DURISSIMI SPECIAL FOR HARD CONSTRUCTION MATERIALES

TYPE OF DRILLING

TIPOLOGIA DI FORATURA

N° ELICHE

GRESMASTER

HELIX

N° OF CUTTING EDGES

ATTACCO

MULTI

IMMAGINE

N° TAGLIENTI

SPECIALI GRÈS PORCELLANATO SPECIAL FOR PORCELAIN

DESCRIZIONE

APPLICATION

APPLICAZIONE

Overview: Masonry drills with Straight shank

MATERIALI EDILI CONSTRUCTION MATERIALS SUPERIOR

HEX 1/4"

Metallo, Ceramica metals, ceramics

UNIVERSALI, FORATUTTO UNIVERSAL, ALL PURPOSE

2 Metallo, Ceramica metals, ceramics

HEX 1/4"

2 Metallo, Ceramica metals, ceramics

HEX 1/4" VETRO E CERAMICA GLASS AND CERAMIC

498

PER VETRO E CERAMICA PER VETRO E CERAMICA

COD.

03112

p.504

LONG SERIE

SERIE LUNGA

mm 3

03100

03072 p.506

COD.

03069

p.507

03060

03063

03065

03067

p.508

03052

03053

03054

03051

p.510

03001

03005

03009 03011

03015

p.512

p.512 p.513

p.513

03059 p.509

COD.

03110

p.505

03042 p.503

LONG SERIE

SERIE LUNGA

COD.

03043 p.501

5 mm

LONG SERIE

SERIE LUNGA

COD.

DIN 8039

SHORT SERIE

SERIE CORTA

PLASTIC

PLASTICA

WOOD

LEGNO

METAL

METALLO

MARMO

GLASS

PORCELAIN STONEWARE

VETRO

GRÈS PORCELLANATO

MARBLE

CERAMICS

CERAMICA

NATURAL AND ARTIFICIAL STONES

PIETRE NATURALI ED ARTIFICIALI

GRANITE

GRANITO

CALCESTRUZZO ARMATO REINFORCED CONCRETE

CONCRETE

CALCESTRUZZO

BRICK

MATTONI

COD.

03076 p.514

COD.

03077 p.515

COD.

03080

03082

p.516

03089 p.517

COD.

03140 p.517

499

GRESMASTER

La praticità di una punta, la forza del metallo duro The practicality of a drill bit, the power of carbide La punta elicoidale GRESMASTER è caratterizzata dalla testa in MD integrale elettrosaldata che, grazie all’affilatura asimmetrica e multi faccia, garantisce un’elevata efficacia e durata dell’utensile. The GRESMASTER drill bit has an asimmetrical sharpening full MD head who garantees high efficiency and durability of the drill bit.

Fori perfetti Perfect holes razie al differente angolo di spoglia di ciascun tagliente, GRESMASTER assicura una più eterogenea lavorazione della superficie rifinendo il foro che risulta perfettamente tondo e liscio. Due to the different angle of each cutting edge, GRESMASTER provides a more heterogeneous surface processing. The result is a perfectly round and smooth hole.

Foratura a secco Dry drilling GRESMASTER a differenza di uanto avviene solitamente nel taglio di materiali duri ha una maggiore efficacia uando utilizzata a secco. tilizzando il corretto numero di giri, anche in assenza di refrigerazione, l’ideale per professionisti che necessitano di utensili pratici e duraturi. GRESMASTER - unlike what is usually done when cutting such hard materials - is more effective when used dry. sing the correct RPM, even in the absence of refrigeration, it is the perfect choice for professionals who need practical and durable tools.

Facile centraggio Easy centering La foratura risulta semplice grazie al tagliente in MD che incide subito anche le superfici molto dure, evitando lo scivolamento laterale della punta. Drilling is easy thanks to the MD cutting edge that immediately cuts even the hardest surface, avoiding to slip from on the surface..

Ideale per trapani portatili Ideal for portable drills GRESMASTER perfetta per l’utilizzo con trapani avvitatori in ualsiasi condizione e non necessita di particolari accorgimenti. Da utilizzare a sola rotazione (anche a velocit di rotazione ridotte) avendo cura di disattivare la percussione dell’elettroutensile. GRESMASTER is perfect with cordless drills in any condition and does not require any special precautions. t should be used with rotation only (low rotation speeds) being sure to turn off the percussion function of the power tool.

500

PUNTA SPECIALE PER GRÈS PORCELLANATO Special drill bit for porcelain

Speciale per grès porcellanato

DIN 8039 ISO 5468

Special for porcelain

Milled

onfezione

Packaging

MADE IN JAPAN Affilatura Speciale Special sharpening

€

cod.

cad/each

4 5 6 8 10

85 85 100 125 150

50 50 65 75 90

030430400 030430500 030430600 030430800 030431000

18,100 19,500 20,500 25,700 30,400

Art. 03044505

€ 1.413,000 54 pcs Ø 4 10 mm

omposizione

Description

Art. 030440001

€ 76,000

Applicazioni Applications

3 pcs Ø 6 8 10 mm

Grès porcellanato Porcelain stoneware

r s smaltato Glazed stoneware

Marmo Marble

Piastrella standard Standard tile

pcs.

4 5 6 8 10 Set 6-8-10

5 5 25 10 5 4

300x420x415

Grès Stoneware

Pietra ranito Natural stones granit

Consigli di utilizzo È l’utensile più facile e intuitivo da utilizzare, si utilizza a secco, è autocentrante. L’unica fondamentale accortezza è utilizzare la punta a bassa velocità, indicativamente a 500 giri/min. (utilizzare la regolazione elettronica della velocità per arrivare a circa metà della velocità in prima marcia di un comune avvitatore, velocità poco più che al minimo per trapani a filo). La punta va utilizzata esclusivamente a sola rotazione, senza l’utilizzo di percussione e avendo cura di raffreddare o lasciar raffreddare l’utensile tra un foro e l’altro. Per prolungarne la durata, la punta va utilizzata per forare la sola piastrella (1): quando si entra in contatto con il muro, nel caso si necessiti ad esempio di installare dei tasselli di fissaggio (3), è bene proseguire il foro con una normale punta per calcestruzzo a rotopercussione (2). Recommendations for use Is the easiest and most intuitive tool to use, it is used dry, and it is self-centering. The only fundamental caution is to use the drill at low speed, approximately 500 rpm. (use the electronic speed control to get to about half the speed in first gear of an ordinary screwdriver, speed little more than idle for corded drills). The drill should be used with rotation only, without the use of percussion and taking care to cool or allow the tool to cool between holes. To prolong its life, the drill should be used to drill the tile only (1): when it comes into contact with the wall, in case you need to install anchor bolts, for example (3), it is a good idea to continue the hole with a regular rotopercussion concrete drill (2).

Diametro punta Drill bit diameter

4÷6

8÷10

Velocità giri/min. RPM speed

500

400

501

GRESMASTER

03043

GRES+ 01

Placchetta in metallo duro con speciale affilatura Carbide plate with special sharpening razie alla speciale affilatura al diamante GRES+ in grado di incidere in modo efficace anche i materiali pi duri. Da utilizzare solo a rotazione, ideale su gr s porcellanato, ceramica, piastrelle e granito. GRES+ is able to etch even the hardest material due to its special diamond sharpening. t should be used in rotation only, it is excellent on porcelain stoneware, ceramics, tiles and granite.

Facile centraggio Easy centering GRES+ garantisce un foro preciso e senza sbavature, incidendo da subito la superficie ed evitando lo scivolamento laterale della punta. GRES+ guarantees a precise and burr-free hole, it immediately etches the surface avoiding to slip on the surface.

Ottima durata Excellent duration GRES+ in grado di forare a secco, ma le migliori performance si ottengono ad umido, assicurando cos un adeguato raffreddamento dell’utensile in fase di foratura. GRES+ can do dry drilling, but the best performance is achieved when wet. This provides an adequate cooling of the tool while drilling.

Placchetta in metallo duro con speciale affilatura al diamante Placchetta in metallo duro con speciale affilatura al diamante.

502

PUNTA SPECIALE PER GRÈS PORCELLANATO Special drill bit for porcelain

Speciale per grès porcellanato

DIN 8039 ISO 5468

Special for porcelain

Milled

130°

onfezione

Packaging

Ø 4 5 6 8 10

HVA 1650

cod.

40 45 55 65 65

80 90 100 120 120

030420400 030420500 030420600 030420800 030421000

€ cad/each

4,800 5,100 5,450 6,700 9,400

Art. 03041505

€ 699,000 105 pcs Ø 4 10 mm

omposizione

Description

Art. 030410001

€ 20,000

Applicazioni Applications

3 pcs Ø 6 8 10 mm

Grès porcellanato Porcelain stoneware

r s smaltato Glazed stoneware

pcs.

4 5 6 8 10 Set 6-8-10

10 10 50 20 10 5

300x420x415

Grès Stoneware

Pietra ranito Natural stones granit

Marmo Marble

Piastrella standard Standard tile

Consigli di utilizzo La punta va utilizzata esclusivamente a sola rotazione, senza l’utilizzo di percussione. Si utilizza come una normale punta per muro, è autocentrante e si utilizza sia a secco che a umido. Da utilizzare a bassa velocità, indicativamente a 500 giri/min. Per prolungarne la durata, la punta va utilizzata per forare la sola piastrella (1): quando si entra in contatto con il muro, nel caso si necessiti ad esempio di installare dei tasselli di fissaggio (3), è bene proseguire il foro con una normale punta per calcestruzzo a rotopercussione (2). Recommendations for use The drill bit is to be used by rotation only, without the use of percussion. It is used as a regular wall bit, is self-centering and can be used both dry and wet. It should be used at low speed, approximately 500 rpm. To prolong its life, the bit should be used to drill the tile only (1): when it comes into contact with the wall, in case you need, for example, to install anchor plugs (3), it is a good idea to continue the hole with a normal rotopercussion concrete bit (2).

Diametro punta Drill bit diameter

4÷6

8÷10

Velocità giri/min. RPM speed

500

400

503

GRES+

03042

PUNTE A ROTOPERCUSSIONE “SUPER GRANIT” PER FORARE LE PIETRE PIÙ DURE E I MATERIALI EDILI DURISSIMI

Rotary percussion drill bits “Super Granit” for extreme hard stones and building materials

03110

DIN 8039 Milled

130°

onfezione

Packaging

HVA 1650

Applicazioni Applications

Granito Granite

Calcestruzzo Concrete

Pietre Stones

Speciale materiali edili durissimi

ISO 5468

Special for hard costruction materials

Ø mm

pollici inches

pcs.

cod.

cad/each

3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 20

1/8 5/32 3/16 15/64 9/32 5/16 23/64 25/64 7/16 15/32 1/2 9/16 19/32 5/8 23/32 25/32

2,8 3,8 4,5 5,5 6,5 7,5 8 9 10 10 10 10 10 12 12 12

30 40 50 60 60 80 80 80 90 90 90 90 100 100 100 100

60 75 75 100 100 120 120 120 150 150 150 150 160 160 160 160

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

031100300 031100400 031100500 031100600 031100700 031100800 031100900 031101000 031101100 031101200 031101300 031101400 031101500 031101600 031101800 031102000

7,339 7,339 7,521 7,792 9,188 9,369 11,025 12,478 14,973 16,686 23,185 26,622 32,033 34,358 40,485 53,619

03112

€

L = 150 - 200 mm

Ø mm

pollici inches

pcs.

cod.

cad/each

€

5 5,5 6,5 8

3/16 7/32 1/4 5/16

4,5 4,5 5,5 7,5

90 90 90 90

150 150 150 150

1 1 1 1

031121500500 031121500550 031121500650 031121500800

11,797 13,019 15,799 15,799

10 14

3/8 9/16

9 12

200 200

250 250

1 1

031122501000 031122501400

19,317 29,609

Art. 03111 Self Disponibile su richiesta On demand

Art. 03116202

€ 45,126

4 pcs Ø 5 6 8 10 mm

Taglio del granito a rotopercussione con grandi rendimenti, taglio delle pietre naturali e artificiali, calcestruzzo e materiali da edilizia vari, fino al 7° scala M HS. Rotary percussion cuts in granit, natural stone, concrete, masonry, up to 7° MOHS.

Placchetta affilata con diamante. Corpo rettificato con scarico ad 40 50. Saldobrasatura a 1100° C.

, in acciaio legato HRC

Large milled flute type “ ” for an efficient dust removal. Diamond sharpened. Body in alloy steel with HRC 40 50. Brazing temperature at 1100° C

504

PUNTE “EXTREME HARD CUT” ALTAMENTE PROFESSIONALI PER FORARE A SOLA ROTAZIONE TUTTI I MATERIALI EDILI DURISSIMI

Professional masonry drills “Extreme Hard Cut” for rotary cutting of hard building materials

03100

DIN 8039 Milled

130°

onfezione

Packaging

HVA 1650

Speciale materiali edili durissimi

ISO 5468

Special for hard costruction materials

Ø mm

pollici inches

pcs.

cod.

cad/each

€

3 4 5 6 8 10 12 14

1/8 5/32 3/16 15/64 5/16 3/8 15/32 9/16

2,8 3,8 4,5 5,5 7,5 9 10 10

30 40 50 60 80 80 90 200

70 75 85 100 120 120 150 250

1 1 1 1 1 1 1 1

031000300 031000400 031000500 031000600 031000800 031001000 031001200 031001400

4,250 4,616 4,616 4,706 5,803 8,150 12,622 18,619

Taglio preciso e senza sbavature a sola rotazione nel marmo, pietre, granito, ceramica, tutti i materiali da edilizia durissimi (sino a 7 gradi scala M HS).

Applicazioni

Precise rotary cut in hard building materials (marble, natural stones, ceramic, granit) up to 7° MOHS.

Applications

Pietre naturali e artificiali Natural and artificial stones

eramica Ceramics

Corpo fresato con scanalatura ad . Saldobrasatura a 1120° C. Placchetta in metallo duro IS uronorm resistente a forti abrasioni, affilata con diamante ed autocentrante. Large milled flute type “ ”, with self-centering positive clearance. Brazing temperature over 1120° C. Special carbide grain tip.

Piastrelle, mattoni durissimi Tiles, hard burnt brick

Pietra ranito Natural stones granit

Art. 03101 Self Disponibile su richiesta On demand

Art. 03105202

€ 26,088

4 pcs Ø 5 6 8 10 mm

390x150x225

505

PUNTE ROTOBATTENTI “MAX 4” A 4 TAGLIENTI E 4 ELICHE PER FORARE AD ALTO RENDIMENTO TUTTI I MATERIALI EDILI Rotary percussion drill bits “max 4” with 4 cutting edges and 4 flutes for cutting concrete and building materials

DIN 8039

03072 MAX4

Milled

onfezione

Packaging

HVA 1650

4 taglienti - Alto rendimento - Per calcestruzzo

ISO 5468

4 cutting edges - High performance - For concrete

Ø mm

pcs.

cod.

cad/each

€

4 5 6 7 8 9 10 11 12 13 14 15 16

3,8 4,8 5,4 6,3 7 8 8,5 10 10 10 10 10 10

40 40 57 55 70 70 70 90 90 90 90 90 90

75 85 100 100 120 120 120 150 150 150 150 150 150

1 1 1 1 1 1 1 1 1 1 1 1 1

030720400 030720500 030720600 030720700 030720800 030720900 030721000 030721100 030721200 030721300 030721400 030721500 030721600

3,005 3,005 3,174 3,484 3,581 3,927 4,434 5,232 5,516 6,969 8,229 10,453 11,614

4 taglienti 4 cutting edges 4 spirali 4 spirals

4 taglienti Placchetta integrale a 4 taglienti in metallo duro resistente alla forte percussione, brasatura con lega saldante a 1100°C. Cutting edges One-piece 4 cutting edges carbide tip resisting to percussion. Brazing temperature at 1000°C. 4 eliche Corpo fresato con scanalatura a L ad alta evacuazione.

Applicazioni

4-flutes Large milled flute type “L” for a faster dust remove.

Applications

Muro Masonry

+30%PRESTAZIONI F R P RF TTAM NT CIRC LAR rispetto a una comune punta a 2 taglienti

Calcestruzzo Concrete

+30% PERFORMANCES Circular hole compared to a 2 cutting edges drill

Pietre Stones

La placchetta in metallo duro monoblocco a 4 taglienti garantisce una grande capacità di taglio e un’ottima precisione di foratura. L’asportazione dei detriti è assicurata dalla combinazione delle 4 eliche e della geometria a L dello scarico. rande rendimento di taglio in tutti i materiali edili, cemento, granito, pietre in genere, mattoni. One-piece 4 cutting edges carbide tip assures great drilling performances and perfect circular holes. Faster dust removal due to the 4 “L” type flutes. Drilling in every building material, concrete, granite, stones.

Art. 03073201

Art. 03073504

€ 12,457

€ 551,393

4 pcs Ø 5 6 8 10 mm

134 pcs Ø 4 16 mm

Art. 03073202

506

Art. 03073203

€ 18,180

€ 21,547

6 pcs Ø4 5 6 8 9 10 mm

7 pcs Ø4 5 6 8 9 10 12 mm

370x380x570

omposizione

Description

pcs.

4 5 6 7 8 9 10 12 13 14 16

7 14 28 7 28 10 15 10 5 5 5

PUNTA UNIVERSALE SDD PER IL TAGLIO DI TUTTI I MATERIALI niveral SDD drill

03069

DIN 8039

130°

onfezione

Packaging

HVA 1650

Applicazioni Applications

Pietre naturali e artificiali Natural and artificial stones

eramica Ceramics

Metalli Metals

SDD - UNIVERSALE

ISO 5468

SDD- Universal

Ø mm

pcs.

cod.

cad/each

€

3 4 5 6 6 6 7 8 8 8 9 10 10 10 10 11 12 12 12 12 13 14 14 14 15 16 16 16 16 18 20

2,8 3,8 4,5 5,5 5,5 5,5 6,4 7,2 7,2 7,2 8,3 9,2 9,2 9,2 9,2 9,9 10 10 10 10 12 12,7 12,7 12,7 13 13 13 13 13 13 13

20 35 45 60 210 360 60 80 210 360 80 80 210 360 560 110 110 210 360 560 110 110 210 360 110 110 210 360 560 120 120

60 75 85 100 250 400 100 120 250 400 120 120 250 400 600 150 150 250 400 600 150 150 250 400 150 150 250 400 600 160 160

10 10 10 10 1 1 10 10 1 1 10 10 1 1 1 6 6 1 1 1 6 6 1 1 6 6 1 1 1 1 1

030690600300 030690750400 030690850500 030691000600 030692500600 030694000600 030691000700 030691200800 030692500800 030694000800 030691200900 030691201000 030692501000 030694001000 030696001000 030691501100 030691501200 030692501200 030694001200 030696001200 030691501300 030691501400 030692501400 030694001400 030691501500 030691501600 030692501600 030694001600 030696001600 030691601800 030691602000

3,209 3,209 3,264 3,317 9,898 14,927 3,477 3,692 10,647 15,247 4,173 4,956 11,503 15,996 17,067 7,715 8,507 15,996 19,206 25,734 9,736 10,647 17,602 21,347 11,342 12,573 20,277 24,556 26,696 14,927 18,672

Piastrelle, mattoni durissimi Tiles, hard burnt brick

Pietra ranito Natural stones granit

Taglio preciso a rotazione in metalli, ceramica e in tutti i materiali da edilizia fragili e a rotopercussione in marmo, granito, pietre. Precise cut, rotation only, into metals, ceramic and fragile building materials. Rotary percussion cut into marble, granit, stones.

Art. 03068202

€ 20,000

4 pcs Ø 5x85 6x100 8x120 10x120 mm Art. 03068204

€ 29,917

7 pcs Ø 3x60 4x 5 5x85 6x100 8x120 9x120 10x120 mm

Art. 03068505

€ 427,664

omposizione

Description

pcs.

3x60 4x75 5x85 6x100 8x120 10x120 12x150

5 5 10 20 20 14 14

Art. 03068205

€ 42,000

8 pcs Ø 3x60 4x 5 5x85 6x100 8x120 9x120 10x120 12X150 mm

507

PUNTE "SUPERIOR" A ROTOPERCUSSIONE PER EDILIZIA AD ELEVATO RENDIMENTO High performance construction drill bits "Superior"

03060

DIN 8039

130°

Per muratura e calcestruzzo

ISO 5468

onfezione

Packaging

HVA 1650

Applicazioni Applications

Muro Masonry

Calcestruzzo Concrete

Pietra Natural Stones

Art. 03061 Self Disponibile su richiesta On demand

Corpo fresato con scanalatura ad L ad alta evacuazione. Placchetta M.D. resistente alla forte percussione, brasatura con lega saldante a 1100° C. Brazing temperature at 1100° C. Large milled flute type “L” for a faster dust removal. Per forare a forte percussione il muro, il cemento, il calcestruzzo, marmo, pietre. so intensivo ed alto rendimento. For use, with rotary percussion, in masonry, concrete, natural stones. High performances in intensive uses.

For masonry and concrete

Ø mm

pollici inches

pcs.

cod.

cad/each

3 4 5 5,5 6 6,5 7 8x107 8 9 10 11 12x120 12 13 14 15 16 18 20

1/8 5/32 3/16 7/32 15/64 1/4 9/32 5/16 5/16 11/32 3/8 7/16 15/32 15/32 1/2 9/16 19/32 5/8 23/32 25/32

2,8 3,8 4,5 4,8 5,5 6 6,5 7,5 7,5 8 9 10 10 10 10 10 10 10 13 13

40 40 40 57 57 57 55 55 70 70 70 90 90 90 90 90 90 90 100 100

70 75 85 100 100 100 100 107 120 120 120 150 120 150 150 150 150 150 160 160

10 10 10 10 10 10 10 10 10 6 6 6 6 6 6 6 6 6 1 1

030600300 030600400 030600500 030600550 030600600 030600650 030600700 030600800C 030600800 030600900 030601000 030601100 030601200C 030601200 030601300 030601400 030601500 030601600 030601800 030602000

2,533 2,533 2,564 2,642 2,642 2,928 2,822 3,037 3,037 3,404 3,949 5,837 6,355 6,355 7,973 8,536 10,094 10,094 12,031 14,742

03063

L = 150 - 200 mm

Ø mm

pollici inches

pcs.

cod.

cad/each

5 6 8 10 12 14 16 18 20

3/16 15/64 5/16 3/8 15/32 9/16 5/8 23/32 25/32

4,7 5,5 7,5 9 10 10 10 10 13

90 90 150 150 150 150 150 150 150

150 150 200 200 200 200 200 200 200

1 1 1 1 1 1 1 1 1

030630500 030630600 030630800 030631000 030631200 030631400 030631600 030631800 030632000

3,972 4,581 5,652 7,040 8,849 10,756 12,938 15,871 18,547

03065

€

L = 400 mm

Ø mm

pollici inches

pcs.

cod.

cad/each

8 10 12 14 16 18 20 22 24

5/16 3/8 15/32 9/16 5/8 23/32 25/32 7/8 15/16

7,5 9,5 10 10 10 10 13 13 13

320 320 320 320 320 320 320 320 320

400 400 400 400 400 400 400 400 400

1 1 1 1 1 1 1 1 1

030650800 030651000 030651200 030651400 030651600 030651800 030652000 030652200 030652400

8,968 10,916 13,335 15,505 19,729 25,067 31,990 39,356 41,561

03067

508

€

L = 600 mm

Ø mm

pollici inches

pcs.

cod.

cad/each

€

8 10 12 14 16 18 20 22 24

5/16 3/8 15/32 9/16 5/8 23/32 25/32 7/8 15/16

7,5 9,5 10 10 10 10 13 13 13

500 500 500 500 500 500 500 500 500

600 600 600 600 600 600 600 600 600

1 1 1 1 1 1 1 1 1

030670800 030671000 030671200 030671400 030671600 030671800 030672000 030672200 030672400

10,874 13,666 16,341 21,685 23,438 32,224 38,222 44,822 52,087

ASSORTIMENTI PUNTE "SUPERIOR" A ROTOPERCUSSIONE PER EDILIZIA AD ELEVATO RENDIMENTO High performance construction drill bits "Superior" sets

Art. 03070201

Art. 03070202

Art. 03070203

4 pcs Ø 5 6 8 10 mm

7 pcs Ø3 4 5 6 8 9 10 mm

8 pcs Ø3 4 5 6 8 9 10 12 mm

€ 17,449

Art. 03070504

€ 645,837

€ 21,255

omposizione

141 pcs Ø 3 16 mm

pcs.

3 4 5 6 7 8 9 10 12 13 14 15

7 7 14 28 7 28 10 15 10 5 5 5

omposizione

Art. 03070503

Description

€ 789,995 142 pcs Ø 3 18 mm

370x380x570

pcs.

3 4 5 6 7 8 9 10 12 13 14 16 8x400 10x400 12x400 16x400 18x400

9 9 9 27 9 18 6 12 6 6 6 6 6 3 3 2 2

ASSORTIMENTI SETS

€ 11,408

PUNTE SUPERIOR” A ROTOPERCUSSIONE PER EDILIZIA CON ATTACCO HEX 1/4” Professional quality masonry drills “Superior” 1/4” q.c. shank

03059

ATTACCO 1/4 HE onfezione

Packaging

1/4 HEX FORM E

Per muratura e calcestruzzo

FORM E

For masonry and concrete

Ø mm

3 4 5 6 7 8 9 10

1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4

€

pcs.

cod.

cad/each

33 35 46 56 48 70 70 70

75 83 93 97 97 120 120 120

10 10 10 10 10 10 10 10

030590300 030590400 030590500 030590600 030590700 030590800 030590900 030591000

3,334 3,484 3,839 4,193 4,344 4,619 4,965 5,143

Art. 03057700

€ 22,341

5 pcs Ø 4 5 6 8 10 mm

509

PUNTE CILINDRICHE PER MURO STANDARD PLUS Quality rotary percussion masonry drills

03052

DIN 8039

onfezione

130°

Per muratura

ISO 5468

Packaging

HVA 1650

For masonry

Ø mm

pollici inches

pcs.

cod.

cad/each

3 4 5 5,5 6 6,5 7 8x107 8 9 10 11 12x120 12 13 14 15 16 18 20

1/8 5/32 3/16 7/32 15/64 1/4 9/32 5/16 5/16 11/32 3/8 7/16 15/32 15/32 1/2 9/16 19/32 5/8 23/32 25/32

2,8 3,8 4,5 4,8 5,5 6 6,5 7,5 7,5 8 9 10 10 10 10 10 10 10 10 13

40 40 40 55 55 70 70 70 70 90 90 90 90 90 90 90 90 90 100 100

70 75 85 100 100 120 120 107 120 120 120 150 120 150 150 150 150 150 160 160

10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5

030520300 030520400 030520500 030520550 030520600 030520650 030520700 030520800C 030520800 030520900 030521000 030521100 030521200C 030521200 030521300 030521400 030521500 030521600 030521800 030522000

1,800 1,800 1,838 1,970 1,970 2,176 2,268 2,764 2,764 2,986 3,534 4,368 4,368 4,368 4,889 5,411 6,468 7,184 7,432 9,177

03053 Applicazioni Applications

Muro Masonry

Calcestruzzo Concrete

Pietra Natural Stones

Corpo con placchetta di alta qualità. Flute with high resistant carbide tips.

L = 150 - 200 mm

Ø mm

pollici inches

pcs.

cod.

cad/each

5 5,5 6 8 10 12 14 16 18 20

3/16 7/32 15/64 5/16 3/8 15/32 9/16 5/8 23/32 25/32

4,7 4,8 5,5 7,5 9 10 10 10 10 13

90 90 90 150 150 150 150 150 150 150

150 150 200 200 200 200 200 200 200 200

5 5 5 5 5 5 5 5 5 5

030530500 030530550 030530600 030530800 030531000 030531200 030531400 030531600 030531800 030532000

3,862 3,982 4,824 5,516 6,390 7,366 9,100 10,231 11,525 12,642

03054

€

L = 400 mm

Ø mm

pollici inches

pcs.

cod.

cad/each

8 10 12 14 16 18 20 22 24

5/16 3/8 15/32 9/16 5/8 23/32 25/32 7/8 15/16

7,5 9,5 10 10 10 10 13 13 13

320 320 320 320 320 320 320 320 320

400 400 400 400 400 400 400 400 400

1 1 1 1 1 1 1 1 1

030540800 030541000 030541200 030541400 030541600 030541800 030542000 030542200 030542400

8,266 11,187 13,298 13,938 24,786 31,762 38,724 40,873 44,100

03051

510

€

L = 600 mm

Ø mm

pollici inches

pcs.

cod.

cad/each

€

8 10 12 14 16 18 20 22 24

5/16 3/8 15/32 9/16 5/8 23/32 25/32 7/8 15/16

7,5 9,5 10 10 10 10 13 13 13

500 500 500 500 500 500 500 500 500

600 600 600 600 600 600 600 600 600

1 1 1 1 1 1 1 1 1

030510800 030511000 030511200 030511400 030511600 030511800 030512000 030512200 030512400

10,466 13,524 15,170 17,170 26,644 34,692 40,643 45,823 54,044

ASSORTIMENTI PUNTE CILINDRICHE PER MURO STANDARD PLUS Quality rotary percussion masonry drills sets

Art. 03057202

Art. 03057204

Art. 03057205

4 pcs Ø 5 6 8 10 mm

7 pcs Ø3 4 5 6 8 9 10 mm

8 pcs Ø3 4 5 6 8 9 10 12 mm

€ 18,331

Art. 03057503

€ 768,563 177 pcs Ø 3 16 mm

€ 21,722

omposizione

Description

pcs.

3 4 5 6 7 8 9 10 12 14 16 8x400 10x400 12x400 14x400

10 10 10 45 10 20 10 20 10 5 5 5 6 6 5

370x380x570

ASSORTIMENTI SETS

€ 11,982

511

PUNTE CILINDRICHE PER MURO, QUALITÀ STANDARD Carbide tipped masonry drills

03001

DIN 8039

130°

onfezione

Packaging

HVA 1600

Applicazioni Applications

Muro Masonry

Art. 03002 Self Disponibile su richiesta On demand

Per muratura

ISO 5468

For masonry

Ø mm

pollici inches

pcs.

cod.

cad/each

3 3,5 4 4,5 5 5,5 6 6,5 7 7,5 8 8,5 9 9,5 10 11 12 13 14 15 16 18 20 22 24 25 26 28 30 32

1/8 9/64 5/32 11/64 3/16 7/32 15/64 1/4 9/32 19/64 5/16 21/64 11/32 3/8 3/8 7/16 15/32 1/2 9/16 19/32 5/8 23/32 25/32 7/8 15/16 1” 1. 1/32 1. 1/8 1. 3/16 1. 1/4

2,8 3,2 3,2 3,8 3,8 4,7 4,7 5,4 5,4 5,8 6 7,1 7,1 8 8 10 10 10 10 10 10 10 13 13 13 13 13 13 13 13

40 40 40 40 40 50 55 55 55 70 70 70 70 70 70 90 90 90 90 90 90 100 100 100 100 100 100 100 100 100

70 75 75 85 85 85 100 100 100 100 120 120 120 120 120 150 150 150 150 150 150 160 160 160 160 160 160 160 160 160

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 1 1 1 1 1 1 1

030010300 030010350 030010400 030010450 030010500 030010550 030010600 030010650 030010700 030010750 030010800 030010850 030010900 030010950 030011000 030011100 030011200 030011300 030011400 030011500 030011600 030011800 030012000 030012200 030012400 030012500 030012600 030012800 030013000 030013200

0,740 0,835 0,782 0,855 0,782 0,939 0,855 1,066 0,961 1,172 1,150 1,395 1,268 1,531 1,458 2,270 2,270 3,052 3,137 3,929 3,929 4,796 5,555 7,699 9,124 11,205 16,116 16,791 18,969 20,996

03005

Art. 03021 Self Disponibile su richiesta On demand

L = 200 mm

Ø mm

pollici inches

pcs.

cod.

cad/each

6 8 9 10 12 13 14 16 18 20

15/64 5/16 11/32 3/8 15/32 1/2 9/16 5/8 23/32 25/32

4,7 6 7,1 8 10 10 10 10 10 13

115 115 115 115 120 120 120 120 120 120

200 200 200 200 200 200 200 200 200 200

5 5 5 5 5 5 5 5 5 5

030050600 030050800 030050900 030051000 030051200 030051300 030051400 030051600 030051800 030052000

2,612 2,894 3,648 3,648 4,469 4,999 5,518 6,855 8,788 10,438

03009

Art. 03024 Self Disponibile su richiesta On demand

512

€

L = 300 mm

Ø mm

pollici inches

pcs.

cod.

cad/each

€

6 8 9 10 12 13 14 16 18 20

15/64 5/16 11/32 3/8 15/32 1/2 9/16 5/8 23/32 25/32

4,7 6 7,1 8 10 10 10 10 10 13

180 180 180 180 180 180 180 180 180 180

300 300 300 300 300 300 300 300 300 300

5 5 5 5 5 5 5 5 5 5

030090600 030090800 030090900 030091000 030091200 030091300 030091400 030091600 030091800 030092000

3,152 3,563 4,556 4,556 5,237 6,326 6,725 8,582 10,979 13,053

PUNTE CILINDRICHE PER MURO, QUALITÀ STANDARD Carbide tipped masonry drills

03011 Ø mm

pollici inches

pcs.

cod.

cad/each

6 8 9 10 11 12 13 14 15 16 18 20 22 24 25 26 28 30 32

15/64 5/16 11/32 3/8 7/16 15/32 1/2 9/16 19/32 5/8 23/32 25/32 7/8 15/16 1" 1/32 1/8 3/16 1/4

5 7 8 9 10 10 10 10 10 10 10 13 13 13 13 13 13 13 13

240 240 240 240 240 240 240 240 240 240 240 240 240 250 250 250 250 250 250

400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400

5 5 5 5 5 5 5 5 5 5 5 5 1 1 1 1 1 1 1

030110600 030110800 030110900 030111000 030111100 030111200 030111300 030111400 030111500 030111600 030111800 030112000 030112200 030112400 030112500 030112600 030112800 030113000 030113200

3,488 4,047 5,549 5,549 5,948 5,948 7,092 7,092 9,025 9,025 11,553 14,769 20,728 23,998 27,205 30,422 32,646 37,050 42,492

03015

Si consiglia di eseguire un preforo di 100÷150 mm dello stesso diametro. se same size pilot drill for 100÷150 mm depth.

Art. 03023 Self Disponibile su richiesta On demand

L = 600 mm

Ø mm

pollici inches

pcs.

cod.

cad/each

6 8 9 10 11 12 13 14 15 16 18 20 22 24 25 26 28 30 35

15/64 5/16 11/32 3/8 7/16 15/32 1/2 9/16 19/32 5/8 23/32 25/32 7/8 15/16 1" 1/32 1/8 3/16 3/8

5 7 8 9 10 10 10 10 10 10 10 13 13 13 13 13 13 13 13

370 370 370 370 370 370 370 370 370 370 370 370 370 370 370 370 370 370 370

600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600

5 5 5 5 5 5 5 5 5 5 5 5 1 1 1 1 1 1 1

030150600 030150800 030150900 030151000 030151100 030151200 030151300 030151400 030151500 030151600 030151800 030152000 030152200 030152400 030152500 030152600 030152800 030153000 030153500

6,186 6,887 8,582 8,993 9,285 9,866 11,553 12,307 15,568 17,144 19,906 23,372 34,211 42,253 46,659 48,526 54,960 63,273 79,952

Art. 03050503

€ 799,593 Art. 03050101

€ 18,399

15 pcs Ø 3 10 x 0,5 mm

Art. 03050203

€ 7,240

281 pcs Ø 3 20 mm

5 pcs Ø 4 5 6 8 10 mm

Art. 03050204

Art. 03050205

7 pcs Ø3 4 5 6 8 9 10 mm

8 pcs Ø3 4 5 6 8 9 10 12 mm

€ 10,280

€

€ 12,064

€

omposizione

Description

pcs.

3 4 5 6 7 8 9 10 12 14 16 18

20 20 20 60 20 30 10 20 10 10 5 3

8x400 10x400 12x400 14x400 16x400 18x400 20x400

10 10 10 10 5 5 3

370x380x570 513

ASSORTIMENTI SETS

Art. 03022 Self Disponibile su richiesta On demand

L = 400 mm

PUNTA“FORATUTTO” UNIVERSALE MULTIK AD ALTE PRESTAZIONI PER IL TAGLIO DI TUTTI I MATERIALI High performance multi-purpose drill bit

03076

DIN 8039

onfezione

130°

Packaging

HVA 1650

Applicazioni Applications

Pietre naturali e artificiali Natural and artificial stones eramica Ceramics

Universali - Foratutto

ISO 5468

Universal - Multipurpose

Ø mm

pcs.

cod.

cad/each

€

3 4 5 5 5,5 6 6 6 6,5 7 8 8 8 8 9 10 10 10 10 11 12 12 12 14 14 16

2,8 3,8 4,5 4,5 4,5 5,5 5,5 5,5 5,5 6,5 7,2 7,2 7,2 7,2 8 9 9 9 9 10 10 10 10 12,3 12,3 14

40 40 50 90 50 60 90 200 60 60 80 90 200 350 80 80 90 200 350 90 90 200 350 150 200 150

70 75 85 150 85 100 150 250 100 100 120 150 250 400 120 120 150 250 400 150 150 250 400 200 250 200

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

030760300070 030760400075 030760500085 030760500150 030760550085 030760600100 030760600150 030760600250 030760650100 030760700100 030760800120 030760800150 030760800250 030760800400 030760900120 030761000120 030761000150 030761000250 030761000400 030761100150 030761200150 030761200250 030761200400 030761400200 030761400250 030761600200

5,052 5,083 5,211 7,480 5,400 5,483 8,353 10,216 6,425 6,947 7,471 9,160 10,483 41,522 8,274 8,772 11,029 13,701 44,935 12,143 12,400 15,874 47,651 17,175 17,728 28,078

Metalli Metals Piastrelle, mattoni durissimi Tiles, hard burnt brick Pietra ranito Natural stones granit Legno Wood Plastica Plastic

Taglio preciso e senza sbavature a rotazione in metalli, ceramica e in tutti i materiali da edilizia durissimi (sino 8° Mohs) e a rotopercussione in marmo, granito, pietre. Precise cut, rotation only, into hardened steel, metals, ceramic and hard building materials (up to 8° Mohs). Rotary percussion cut into marble, granit, stones. Placchetta affilata con diamante con geometria innovativa. Corpo rettificato con scarico ad , in acciaio legato HRC 40 50. Saldobrasatura a 1100° C. Large milled flute type “ ” for an efficient dust removal. Diamond sharpened. Body in alloy steel with HRC 40 50. Brazing temperature at 1100° C.

Art. 03078201

Art. 03078204

4 pcs Ø 4x 5 5x85 6x100 8x120 mm

7 pcs Ø 3x 0 4x 5 5x85 6x100 8x120 9x120 10x120 mm

Art. 03078202

Art. 03078208

4 pcs Ø 5x85 6x100 8x120 10x120 mm

8 pcs Ø 3x 0 4x 5 5x85 6x100 8x120 9x120 10x120 12X150 mm

€ 31,665

€ 32,000

514

€ 58,477

€ 66,000

PUNTA “FORATUTTO” UNIVERSALE MULTIK AD ALTE PRESTAZIONI PER IL TAGLIO DI TUTTI I MATERIALI CON ATTACCO HEX 1/4" High performance multi-purpose drill bit

03077

DIN 8039

onfezione

130°

Packaging

HVA 1650

Universali - Foratutto

ISO 5468

Universal - Multipurpose

Ø mm

pollici inches

pcs.

cod.

cad/each

€

3 4 5 5,5 6 6 6,5 7 8 10

1/8 5/32 3/16 7/32 15/64 15/64 1/4 9/32 5/16 3/8

1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4

45 45 50 60 60 200 200 50 50 90

90 90 100 100 100 250 250 100 100 150

1 1 1 1 1 1 1 1 1 1

030770300090 030770400090 030770500100 030770550100 030770600100 030770600250 030770650250 030770700100 030770800100 030771000150

6,399 6,444 6,579 7,085 7,243 13,124 13,777 8,888 8,730 12,764

1/4" HEX FORM E

Taglio preciso e senza sbavature a rotazione in metalli, ceramica e in tutti i materiali da edilizia durissimi (sino 8° Mohs) e a rotopercussione in marmo, granito, pietre.

Applicazioni Applications

Pietre naturali e artificiali Natural and artificial stones eramica Ceramics

Precise cut, rotation only, into hardened steel, metals, ceramic and hard building materials (up to 8° Mohs). Rotary percussion cut into marble, granit, stones. Placchetta affilata con diamante con geometria innovativa. Corpo rettificato con scarico ad , in acciaio legato HRC 40 50. Saldobrasatura a 1100° C. Large milled flute type “ ” for an efficient dust removal. Diamond sharpened. Body in alloy steel with HRC 40 50. Brazing temperature at 1100° C.

Metalli Metals Piastrelle, mattoni durissimi Tiles, hard burnt brick Pietra ranito Natural stones granit

Art. 03078301

Legno Wood

4 pcs Ø 4 5 6 8 mm

€ 39,367

Plastica Plastic

515

PUNTA “FORATUTTO” UNIVERSALE PER IL TAGLIO DI TUTTI I MATERIALI High performance multi-purpose drill bit

03080

DIN 8039

onfezione

130°

Universali - Foratutto

ISO 5468

Packaging

HVA 1650

Affilatura positiva Positive relief

Art. 03081 Self Disponibile su richiesta On demand

Universal - Multipurpose

Ø mm

pollici inches

pcs.

cod.

cad/each

3 4 5 6 7 8x107 8 9 10 11 12x120 12 13 14 15 16

1/8 5/32 3/16 15/64 9/32 5/16 5/16 11/32 3/8 7/16 15/32 15/32 1/2 9/16 19/32 5/8

2,8 3,8 4,5 5,5 6,5 7,5 7,5 8 9 10 10 10 10 10 10 10

40 40 40 55 55 70 70 70 70 90 90 90 90 90 90 90

70 75 85 100 100 107 120 120 120 150 120 150 150 150 150 150

10 10 10 10 10 10 10 10 10 6 6 6 6 6 6 6

030800300 030800400 030800500 030800600 030800700 030800800C 030800800 030800900 030801000 030801100 030801200C 030801200 030801300 030801400 030801500 030801600

2,884 2,884 2,884 3,011 3,415 3,642 3,642 4,301 4,580 6,250 6,250 6,250 9,017 10,699 14,050 14,050

03082

Art. 03083 Self Disponibile su richiesta On demand

€

L = 250 mm

ØxL mm

pcs.

cod.

cad/each

€

6x150 8x250 10x250 12x250 14x250

5,5 7,5 9 10 10

125 130 130 130 130

150 250 250 250 250

10 10 10 6 6

030820600 030820800 030821000 030821200 030821400

7,463 11,001 11,461 14,426 22,463

Applicazioni Applications

Pietre naturali e artificiali Natural and artificial stones eramica Ceramics

Per forare a sola rotazione: acciaio duro, acciai in genere, ghisa, tutti i metalli, muro, calcestruzzo, ceramica, pavimenti in genere, legno e derivati, plastica, laminati.

Metalli Metals

For rotary cutting in hardened steel, metals, cement, brick, tiles, ceramic, wood, plastics.

Piastrelle, mattoni durissimi Tiles, hard burnt brick Pietra ranito Natural stones granit Art. 03085503

€ 807,061

Legno Wood Art. 03085201

€ 14,367

ASSORTIMENTI SETS

Plastica Plastic

156 pcs Ø 3 16 mm

4 pcs Ø 4 5 6 8 10 mm

Art. 03085202

Art. 03085203

€ 21,893

€ 26,673

7 pcs Ø3 4 5 6 8 9 10 mm

8 pcs Ø3 4 5 6 8 9 10 12 mm

370x380x570

516

omposizione

Description

pcs.

3 4 5 6 7 8 9 10 11 12 13 14 15 16

9 9 18 27 9 18 6 18 6 12 6 6 6 6

PUNTA UNIVERSALE “FORATUTTO®” CON ATTACCO HEX 1/4” Multi-purpose drill bits

Universali - Foratutto

03089 130°

Universal - Multipurpose onfezione

Packaging

HVA 1750

Ø mm

3 4 5 6 7 8 9 10

1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4

€

pcs.

cod.

cad/each

33 40 46 56 48 70 70 70

75 83 93 97 97 120 120 120

1 1 1 1 1 1 1 1

030890300 030890400 030890500 030890600 030890700 030890800 030890900 030891000

3,972 4,196 4,196 4,533 4,879 4,971 5,360 5,636

1/4" HEX FORM E

Art. 03085700

€ 27,355

5 pcs Ø 4 5 6 8 10 mm

Applicazioni Applications

Pietre naturali e artificiali Natural and artificial stones

Metalli Metals

Pietra ranito Natural stones granit

eramica Ceramics

Piastrelle, mattoni durissimi Tiles, hard burnt brick

Legno Wood

Plastica Plastic

PUNTE PER VETRO E CERAMICA Glass drill bits

Per vetro e ceramica

03140

For glass and ceramic

onfezione

Packaging

HRA 90

Ø mm

pcs.

cod.

cad/each

€

3 4 5 6 7 8 9 10 12

3 3 4 5 5 6 6 7 8

58 58 58 58 78 78 98 98 98

1 1 1 1 1 1 1 1 1

031400300 031400400 031400500 031400600 031400700 031400800 031400900 031401000 031401200

4,441 4,607 4,782 5,257 5,773 5,773 6,597 8,245 10,307

Applicazioni Applications

Vetro Glass

Taglio a sola rotazione nel vetro, selezionando la velocità di taglio più bassa possibile e refrigerando con acqua o trementina. Riaffilare frequentemente nel taglio di vetri duri. Rotary cut in glass, with water cooling, at low speed.

eramica Ceramics Art. 03146700

€ 27,511

Art. 03143 Self Disponibile su richiesta On demand

5 pcs Ø 4 5 6 8 10 mm

517

VISIONE D'INSIEME: PUNTE PER MURO CON ATTACCO SDS

N° CUTTING EDGES

N° ELICHE

K4 SUPERPRO K4 SUPERPRO

STANDARD STANDARD

SPECIALE GRANDI DIAMETRI DA 45 A 80 mm SPECIAL FOR BIG DIAMETERS FROM 45 TO 80 mm

SUPER PRO SUPER PRO

IMAGE

DESCRIPTION

N° HELIX

N° TAGLIENTI

IMMAGINE

DESCRIZIONE

SHANK

TIPO DI ATTACCO

Overview: Masonry drills with SDS shank

SDS-PLUS

SDS-MAX

- SPECIALI CON ASPIRAZIONE POLVERE

518

SDS-PLUS

DUST FREE DUST FREE

SDS-MAX

DUST FREE DUST FREE

2 > 28 mm

BRICK

CALCESTRUZZO

CONCRETE

CALCESTRUZZO ARMATO

REINFORCED CONCRETE

GRANITO

GRANITE

PIETRE NATURALI E ARTIFICIALI

NATURAL AND ARTIFICIAL STONES

MATTONI

COD.

03169 p.520

COD.

03167 p.522

COD.

03152 p.525

COD.

03156 p.526

COD.

03160 p.528

COD.

03155 p.530

COD.

03171 p.532

COD.

03170 p.533

COD.

03172 p.534

COD.

03172 p.535

519

PUNTE PER TRAPANI A MARTELLO SDS-PLUS CON 4 ELICHE E 4 TAGLIENTI SDS-PL S hammer drills, 4 flutes, 4 cutting edges

Testa integrale in MD - 4 taglienti Full carbide head - 4 edges

03169 ®

onfezione

Packaging

Saldatura per diffusione elettronica, 3 volte pi resistente della saldobrasatura Electronic diffusion bond, 3 times more resistant than brazing

MADE IN GERMANY

Applicazioni Applications

Muro Masonry Calcestruzzo armato Reinforced Concrete Pietra Natural Stones

mm 4 taglienti 2 eliche Ø 18÷30 mm: 2 flutes 4 cutting edges

ø 3,5 4 mm

ø5 16 mm

ø 18 30 mm

Ø mm

3,5 3,5 4 4 5 5 5 5 5 5 5,5 5,5 5,5 5,5 5,5 5,5 6 6 6 6 6 6 6,5 6,5 6,5 6,5 6,5 6,5 7 7 7 7 8 8 8 8 8 8 8 9 9 10 10 10 10 10 10 10 10 10

115 165 115 165 115 165 215 265 315 465 115 165 215 265 315 465 115 165 215 265 315 465 115 165 215 265 315 465 115 165 215 265 115 165 215 265 315 365 465 165 215 115 165 215 265 315 365 465 600 1000

50 100 50 100 50 100 150 200 250 400 50 100 150 200 250 400 50 100 150 200 250 400 50 100 150 200 250 400 50 100 150 215 50 100 150 200 250 300 400 100 150 50 100 150 200 250 300 400 550 950

pcs.

cod.

€ cad/each

1 031691150350 11,246 1 031691650350 12,505 1 031691150400 12,155 1 031691650400 12,694 1 031691150500 8,723 1 031691650500 9,854 1 031692150500 12,268 1 031692650500 14,596 1 031693150500 20,375 1 031694650500 35,562 1 031691150550 9,290 1 031691650550 10,494 1 031692150550 12,268 1 031692650550 15,429 1 031693150550 20,375 1 031694650550 37,341 1 031691150600 9,150 1 031691650600 10,055 1 031692150600 12,339 1 031692650600 14,533 1 031693150600 20,597 1 031694650600 35,562 1 031691150650 10,219 1 031691650650 12,339 1 031692150650 16,625 1 031692650650 20,009 1 031693150650 24,597 1 031694650650 48,000 1 031691150700 12,155 1 031691650700 13,233 1 031692150700 16,003 1 031692650700 29,400 1 031691150800 10,417 1 031691650800 10,652 1 031692150800 12,523 1 031692650800 14,744 1 031693150800 19,813 1 031693650800 30,228 1 031694650800 32,514 1 031691650900 12,339 1 031692150900 14,178 1 031691151000 10,730 1 031691651000 11,786 1 031692151000 13,691 1 031692651000 16,625 1 031693151000 20,009 1 031693651000 32,006 1 031694651000 35,128 1 031696001000 66,151 1 0316910001000 143,942

pcs.

cod.

cad/each

€

11 11 11 12 12 12 12 12 12 12 12 13 13 13 14 14 14 14 14 14 14 14 15 15 15 16 16 16 16 16 16 17 17 18 18 18 18 20 20 20 20 22 22 22 22 24 25 25 25 28 30

165 215 265 165 215 265 315 365 465 600 1000 165 215 265 165 215 265 315 365 465 600 1000 165 265 465 215 265 315 465 600 1000 215 315 250 450 600 1000 250 450 600 1000 250 450 600 1000 450 450 600 1000 450 450

100 150 200 100 150 200 250 300 400 550 950 100 150 200 100 150 200 250 300 400 550 950 100 200 400 150 200 250 400 550 950 150 250 200 400 550 950 200 400 550 950 200 400 550 950 400 400 550 950 400 400

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

031691651100 031692151100 031692651100 031691651200 031692151200 031692651200 031693151200 031693651200 031694651200 031696001200 0316910001200 031691651300 031692151300 031692651300 031691651400 031692151400 031692651400 031693151400 031693651400 031694651400 031696001400 0316910001400 031691651500 031692651500 031694651500 031692151600 031692651600 031693151600 031694651600 031696001600 0316910001600 031692151700 031693151700 031692501800 031694501800 031696001800 0316910001800 031692502000 031694502000 031696002000 0316910002000 031692502200 031694502200 031696002200 0316910002200 031694502400 031694502500 031696002500 0316910002500 031694502800 031694503000

16,257 18,899 23,174 13,331 16,136 18,713 25,301 35,562 37,172 67,985 153,621 18,367 25,224 30,177 18,437 24,597 28,205 31,111 39,118 39,582 70,196 188,042 26,672 33,220 47,552 32,463 36,654 41,303 49,838 82,685 194,781 54,814 63,516 57,271 68,291 76,252 179,399 65,727 72,089 146,694 209,163 81,520 107,063 151,716 212,845 120,482 122,504 178,294 245,125 135,605 148,471

4 taglienti HVA 1650 Placchetta integrale a 4 taglienti in metallo duro resistente alla forte percussione, è saldato al corpo per diffusione elettronica. 4 cutting edges HVA 1650 One-piece 4 cutting edges carbide tip resisting to percussion. Welded to the body by electronic diffusion bond. 4 eliche Corpo fresato con scanalatura a L ad alta evacuazione. 4 flutes Large milled flute type “L” for a faster dust removal.

520

Ø mm

Testa in metallo duro integrale Carbide tip Zona di transizione Transition area Corpo in acciaio Steel body

ASSORTIMENTI PUNTE SDS-PLUS CON 4 ELICHE E 4 TAGLIENTI

SDS/PL S hammer drills sets, 4 flutes, 4 cutting edges

Art. 03174403

Art. 03174203

€ 59,928

€ 86,505

5 pcs Ø 5 6 x 115 mm Ø 8 10 12 x 165 mm

7 pcs Ø 5 6 8 x 115 mm Ø 6 8 10 12 x 165 mm

Art. 03174503

€ 976,433 68 pcs Ø 5 16 mm

omposizione

Description

Ø 5x115 6x115 5x165 6x165 8x165 10x165 12x165 6x215 8x215

pcs. 3 8 3 8 8 5 5 4 4

Ø 10x215 12x215 14x215 16x215 8x265 10x265 12x265 14x265 16x265

pcs. 3 3 2 2 2 2 2 2 2

370x380x570

Preforo Pilot-hole mm

Per punte con L ≥ 300 mm si raccomanda un preforo con punte di lunghezza inferiore (200 150 mm). For drills with L 300 mm, pre-drilling with shorter drill bits (200÷150 mm) is recommended.

ASSORTIMENTI SETS

La speciale testa dell’utensile è saldata al corpo per diffusione: questa nuova tecnologia garantisce un legame estremamente stabile tra placchetta in metallo duro e corpo della punta, perché la giunzione avviene allo stato solido per diffusione degli atomi del reticolo cristallino all’interfaccia tra i due pezzi. La placchetta in metallo duro monoblocco a 4 taglienti garantisce una grande capacità di taglio, una perfetta trasmissione della potenza e un’ottima asportazione dei detriti grazie alla combinazione dei 4 taglienti, della placchetta integrale e delle 4 eliche. La punta a 4 taglienti e 4 spirali taglia sempre e senza problemi il tondino nel cemento armato. arantisce un grande rendimento di taglio in tutti i materiali edili, cemento, granito, cemento armato, pietre in genere, mattoni. rande precisione di foratura, grande durata della vita dell’utensile, massima limitazione delle vibrazioni del martello. One-piece carbide tip is welded to the body by electronic diffusion bonding: this new technology assures a very stable link between the carbide tip and the drill body, because the bonding is made between solid phases through the atoms diffusion. The solid carbide tip assures high performances, a good power transmission and a great debris removal thanks to 4 flutes and 4 cutting edges one-piece solid carbide. The hammer drill 4x4 Speedmaster always cuts the steel bar into reinforced concrete. You can drill into all the building materials, concrete, masonry, reinforced concrete, stones, bricks. It assures thorough holes, long tool life cycle, low hammer vibrations

521

PUNTE PER TRAPANI A MARTELLO SDS-PLUS CON 4 ELICHE E 4 TAGLIENTI

4 x4

SDS-PL S hammer drills, 4 flutes, 4 cutting edges

Testa integrale in MD - 4 taglienti Full carbide head - 4 edges

SPEEDMASTER

03167 ®

onfezione

Packaging

MADE IN GERMANY

Applicazioni Applications

Muro Masonry Calcestruzzo armato Reinforced Concrete Pietra Natural Stones

Ø mm

5 5 5,5 5,5 6 6 6 6 6 6,5 6,5 6,5 6,5 7 7 8 8 8 8 8 8 9 10 10 10 10 10 10 10 10 11 11 12 12 12 12 12 12

110 160 110 160 110 160 210 260 310 160 210 260 310 110 160 110 160 210 260 310 460 160 110 160 210 260 310 450 600 1000 160 210 160 210 260 310 450 600

50 100 50 100 50 100 150 200 250 100 150 200 250 50 100 50 100 150 200 250 400 100 50 100 150 200 250 400 550 950 100 150 100 150 200 250 400 550

cad/each

Ø mm

1 031671100500 10,524 1 031671600500 11,327 1 031671100550 11,192 1 031671600550 12,128 1 031671100600 10,659 1 031671600600 11,661 1 031672100600 14,614 1 031672600600 17,557 1 031673100600 25,070 1 031671600650 14,815 1 031672100650 19,978 1 031672600650 25,673 1 031673100650 29,887 1 031671100700 14,069 1 031671600700 14,882 1 031671100800 12,396 1 031671600800 13,078 1 031672100800 14,882 1 031672600800 18,093 1 031673100800 25,807 1 031674600800 36,464 1 031671600900 13,745 1 031671101000 12,865 1 031671601000 13,745 1 031672101000 16,219 1 031672601000 19,776 1 031673101000 23,789 1 031674501000 41,625 1 031676001000 60,532 1 0316710001000 150,817 1 031671601100 16,476 1 031672101100 19,877 1 031671601200 15,885 1 031672101200 19,375 1 031672601200 21,983 1 031673101200 30,165 1 031674501200 45,317 1 031676001200 62,393

12 13 13 13 13 14 14 14 14 14 14 14 15 15 15 15 16 16 16 16 16 16 16 18 18 20 20 22 22 24 24 25 25 28 28 30 30 32

1000 160 210 260 310 160 210 260 310 450 600 1000 160 210 260 450 160 210 260 310 450 600 1000 250 450 250 450 250 450 250 450 250 450 250 450 250 450 450

950 100 150 200 250 100 150 200 250 400 550 950 100 150 200 400 100 150 200 250 400 550 950 200 400 200 400 200 400 200 400 200 400 200 400 200 400 400

pcs.

cod.

€

pcs.

cod.

1 0316710001200 159,188 1 031671601300 20,723 1 031672101300 34,670 1 031672601300 39,017 1 031673101300 41,770 1 031671601400 22,452 1 031672101400 30,021 1 031672601400 33,110 1 031673101400 37,200 1 031674501400 46,720 1 031676001400 67,699 1 0316710001400 165,219 1 031671601500 35,127 1 031672101500 40,891 1 031672601500 44,501 1 031674501500 58,982 1 031671601600 37,200 1 031672101600 41,893 1 031672601600 44,580 1 031673101600 50,265 1 031674501600 59,663 1 031676001600 82,850 1 0316710001600 174,260 1 031672501800 61,056 1 031674501800 72,114 1 031672502000 68,236 1 031674502000 78,491 1 031672502200 72,315 1 031674502200 91,021 1 031672502400 83,585 1 031674502400 100,741 1 031672502500 86,540 1 031674502500 106,103 1 031672502800 102,013 1 031674502800 112,134 1 031672503000 107,519 1 031674503000 146,737 1 031674503200 157,917

4 taglienti HVA 1650 Placchetta integrale a 4 taglienti in metallo duro resistente alla forte percussione, brasatura con lega saldante a 1100°C.

Solid Carbide head

4 cutting edges HVA 1650 One-piece 4 cutting edges carbide tip resisting to percussion. Brazing temperature at 1000°C

Ø 5-10 mm

4 eliche Corpo fresato con scanalatura a L ad alta evacuazione.

Single Carbide tip

4 flutes Large milled flute type “L” for a faster dust removal.

Ø 12-16 mm Multi-part Carbide tip

18-32 mm Preforo Pilot-hole mm

522

€ cad/each

Per punte con L ≥ 300 mm si raccomanda un preforo con punte di lunghezza inferiore (200 150 mm). For drills with L 300 mm, pre-drilling with shorter drill bits (200÷150 mm) is recommended.

ASSORTIMENTI PUNTE SDS-PLUS CON 4 ELICHE E 4 TAGLIENTI

4 x4

SDS/PL S hammer drills sets, 4 flutes, 4 cutting edges

SPEEDMASTER

Art. 03168203

Art. 03168402

€ 98,000

€ 76,163

7 pcs Ø 5 6 8 x 110 mm Ø 6 8 10 12 x 160 mm

5 pcs Ø 5 6 x 110 mm Ø 8 10 12 x 160 mm

Art. 03168460

€ 544,691 30 pcs Ø 6 14 mm

omposizione

Description

6x160 8x160 10x160 12x160 10x210 12x210 14x210

pcs. 5 5 5 5 5 3 2

Art. 03168503

Art. 03168500

68 pcs Ø 5 16 mm

46 pcs Ø 5 16 mm

€ 1.355,717

€ 1.012,143

omposizione

Description

370x380x570

5x110 6x110 5x160 6x160 8x160 10x160 12x160 6x210 8x210 10x210 12x210 14x210 16x210 8x260 10x260 12x260 14x260 16x260

Description

pcs. 3 8 3 8 8 5 5 4 4 3 3 2 2 2 2 2 2 2

370x380x570

5x110 6x110 6x160 8x160 10x160 12x160 8x210 10x210 12x210 14x210 16x210 14x260 16x260

pcs. 4 6 6 6 4 4 4 2 2 2 2 2 2

ASSORTIMENTI SETS

523

T esta integrale in metallo duro Full carbide head

Massima stabilità Max stability

Grazie alla speciale punta a forma piramidale thanks to special piramid shape of the tip

4 taglienti 4 cutting edges Per massime prestazioni nei lavori gravosi For max performances on heavy works

Saldatura elettronica per diffusione Diffusion welding process La saldatura omogenea tra la testa e il corpo della punta permette di resistere a elevate sollecitazioni e calore The homogeneous weld between the head and body of the tip allows it to withstand to high temperatures and stress 524

PUNTE "SDS LITE" PER TRAPANI A MARTELLO SDS-PLUS CON 4 ELICHE E 4 TAGLIENTI SDS-PL S hammer drills "SDS-LITE", 4 flutes, 4 cutting edges

SDS PL S

onfezione

Packaging

Ø mm

pcs.

cod.

cad/each

€

6 6 6 8 8 8 8 8 10 10 10 10 12 12 12 12 12

115 165 215 115 165 215 265 315 165 215 265 315 165 215 265 315 465

50 100 150 50 100 150 200 250 100 150 200 250 100 150 200 250 400

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

031521150600 031521650600 031522150600 031521150800 031521650800 031522150800 031522650800 031523150800 031521651000 031522151000 031522651000 031523151000 031521651200 031522151200 031522651200 031523151200 031524651200

6,680 7,345 9,010 7,605 7,990 9,395 12,095 14,860 9,195 10,680 13,635 16,410 12,910 12,910 15,910 18,470 27,140

Applicazioni Applications

Muro Masonry Calcestruzzo armato Reinforced Concrete

Preforo Pilot-hole mm

Per punte con L ≥ 300 mm si raccomanda un preforo con punte di lunghezza inferiore (200 150 mm). For drills with L 300 mm, pre-drilling with shorter drill bits (200÷150 mm) is recommended.

Pietra Natural Stones

525

SDS LITE

Testa integrale in MD - 4 taglienti Full carbide head - 4 edges

03152

PUNTE PER TRAPANI A MARTELLO SDS-PLUS CON 4 ELICHE E 4 TAGLIENTI SDS-PL S hammer drills, 4 flutes, 4 cutting edges

4 taglienti 4 cutting edges

03156 SDS PL S

onfezione

Packaging

HVA 1650

4 taglienti 4 cutting edges 4 spirali 4 spirals

Applicazioni Applications

Muro Masonry Calcestruzzo armato Reinforced Concrete Pietra Natural Stones

Ø mm

pcs.

cod.

cad/each

Ø mm

pcs.

cod.

cad/each

5 5 5,5 6 6 6 6 6,5 6,5 6,5 7 7 8 8 8 8 8 8 9 9 10 10 10 10 10 10 10 10 11 11 11 12 12 12 12 12 12

110 160 160 110 160 210 260 160 210 260 110 160 110 160 210 260 310 460 160 210 110 160 210 260 310 360 460 610 160 210 260 160 210 260 310 460 600

50 100 100 50 100 150 200 100 150 200 50 100 50 100 150 200 250 400 100 150 50 100 150 200 250 300 400 550 100 150 200 100 150 200 250 400 550

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

031561100500 031561600500 031561600550 031561100600 031561600600 031562100600 031562600600 031561600650 031562100650 031562600650 031561100700 031561600700 031561100800 031561600800 031562100800 031562600800 031563100800 031564600800 031561600900 031562100900 031561101000 031561601000 031562101000 031562601000 031563101000 031563601000 031564601000 031566101000 031561601100 031562101100 031562601100 031561601200 031562101200 031562601200 031563101200 031564601200 031566001200

3,745 4,370 4,714 3,996 4,714 6,551 7,488 4,829 6,551 7,488 4,235 4,829 4,370 4,965 6,685 7,625 9,220 15,176 5,048 7,113 4,486 5,122 7,113 7,750 11,275 13,978 15,219 24,606 5,800 7,468 8,042 5,800 7,812 8,355 13,341 16,303 27,016

13 13 13 13 14 14 14 14 14 14 15 15 16 16 16 16 16 16 18 18 18 18 18 20 20 20 20 22 22 22 24 24 25 25 26 28 30

160 210 260 460 160 210 260 310 460 600 160 260 160 210 260 310 460 600 210 260 310 460 600 200 310 460 600 250 460 600 260 460 260 460 460 460 460

100 150 200 400 100 150 200 250 400 550 100 200 100 150 200 250 400 550 150 200 250 400 550 150 250 400 550 200 400 550 200 400 200 400 400 400 400

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

031561601300 031562101300 031562601300 031564601300 031561601400 031562101400 031562601400 031563101400 031564601400 031566001400 031561601500 031562601500 031561601600 031562101600 031562601600 031563101600 031564601600 031566001600 031562101800 031562601800 031563101800 031564601800 031566001800 031562002000 031563102000 031564602000 031566002000 031562502200 031564602200 031566002200 031562602400 031564602400 031562602500 031564602500 031564602600 031564602800 031564603000

6,645 8,532 8,836 14,488 7,824 8,699 9,232 13,487 15,042 29,195 9,220 10,107 10,712 11,306 14,353 15,437 16,188 33,534 14,821 17,347 16,220 19,391 33,514 20,037 21,601 25,180 37,352 22,290 28,392 43,110 24,293 30,321 26,305 32,888 41,128 44,007 51,194

1 A

A Sez. AA Immagine ottenuta al microscopio sezionando la testa dell’utensile

Preforo Pilot-hole mm

€

Per punte con L ≥ 300 mm si raccomanda un preforo con punte di lunghezza inferiore (200 150 mm). For drills with L 300 mm, pre-drilling with shorter drill bits (200÷150 mm) is recommended.

Picture of the carbide tip

Placchetta in metallo duro integrale con 4 taglienti, 4 eliche rapide, corpo in acciaio ad alta resistenza. La punta a 4 taglienti e 4 spirali taglia sempre il tondino in cemento armato e non si blocca mai. rande durata dell’utensile, precisione e circolarità del foro. One-piece solid carbide with 4 cutting edges, 4 flutes, steel body with high resistance. One-piece solid carbide tip always cuts the steel bar into reinforced concrete and it never stops. Long life cycle, thoroughness and roundness of the hole.

526

€

ASSORTIMENTI PUNTE SDS-PLUS CON 4 ELICHE E 4 TAGLIENTI

SDS-PL S hammer drills sets, 4 flutes, 4 cutting edges K8

Art. 03166460

€ 233,913 30 pcs Ø 6 14 mm

METAL

omposizione

Art. 03166401

Description

€ 40,637

7 pcs Ø 5 6 8 x 110 mm Ø 6 8 10 12 x 160 mm

6x160 8x160 10x160 12x160 10x210 12x210 14x210

pcs. 5 5 5 5 5 3 2

Art. 03165310

€ 69,512 13 pcs Ø 6 14 mm

omposizione

Description

Ø 6x160 8x160 10x160 8x210 10x210 12x210 10x260 12x260 14x260

pcs.

1 1 1 1 1 1 1 1 1

pcs.

L=250

Art. 03166503

€ 846,554 107 pcs Ø 5 16 mm

omposizione

370x380x570

pcs.

5x110 6x110 5x160 6x160 8x160 10x160 12x160 6x210 8x210 10x210 12x210 14x210 16x210 8x260 10x260 12x260 14x260 16x260

5 10 5 10 10 10 10 5 5 5 5 5 3 5 5 3 3 3

ASSORTIMENTI SETS

Description

527

PUNTE PER TRAPANI A MARTELLO SDS-PLUS, QUALITÀ SUPER PROFESSIONALE “K 4” SDS-PL S hammer drills “K 4”

03160 ®

onfezione

Packaging

HVA 1650 2 taglienti 2 cutting edges 4 spirali 4 spirals

MADE IN GERMANY Applicazioni Applications

Muro Masonry

Calcestruzzo Concrete

Pietra Natural Stones

* Corpo a doppia spirale per Ø ≤ 4 mm Ø 16 mm Double spiral body Ø ≤ 4 mm Ø > 16 mm

Placchetta attiva” con gole di scarico Active plate ≤

Placchetta con puntina di centraggio Plate with centering point ≤

2 cutting edges Ø mm

pcs.

*3,5 *3,5 *4 *4 5 5 5 5 5,5 5,5 5,5 5,5 5,5 5,5 6 6 6 6 6 6,5 6,5 6,5 6,5 6,5 7 7 7 8 8 8 8 8 8 8 9 9 10 10 10 10 10 10 10 10 11 11 11 12 12 12

110 135 110 160 110 160 210 310 110 160 210 260 310 460 110 160 210 260 460 110 160 210 260 310 110 160 210 110 160 210 260 310 460 610 160 210 110 160 210 260 310 460 610 1000 160 210 260 160 210 260

50 75 50 100 50 100 150 250 50 100 150 200 250 400 50 100 150 200 400 50 100 150 200 250 50 100 150 50 100 150 200 250 400 550 100 150 50 100 150 200 250 400 550 950 100 150 200 100 150 200

1 031601100350 1 031601350350 1 031601100400 1 031601600400 1 031601100500 1 031601600500 1 031602100500 1 031603100500 1 031601100550 1 031601600550 1 031602100550 1 031602600550 1 031603100550 1 031604600550 1 031601100600 1 031601600600 1 031602100600 1 031602600600 1 031604600600 1 031601100650 1 031601600650 1 031602100650 1 031602600650 1 031603100650 1 031601100700 1 031601600700 1 031602100700 1 031601100800 1 031601600800 1 031602100800 1 031602600800 1 031603100800 1 031604600800 1 031606100800 1 031601600900 1 031602100900 1 031601101000 1 031601601000 1 031602101000 1 031602601000 1 031603101000 1 031604601000 1 031606101000 1 0316010001000 1 031601601100 1 031602101100 1 031602601100 1 031601601200 1 031602101200 1 031602601200

cod.

€ cad/each

9,754 15,714 8,204 10,676 5,170 7,136 12,104 16,809 5,518 7,354 10,280 18,820 27,254 46,241 4,798 5,864 6,862 8,985 23,285 5,721 5,937 10,041 10,472 13,447 7,569 8,770 9,754 5,864 7,426 7,642 9,345 12,829 21,011 30,103 11,035 12,031 6,298 7,354 8,625 10,123 11,135 21,756 35,049 59,339 11,114 15,651 17,470 10,843 12,740 14,011

Ø mm

pcs.

12 12 12 12 13 13 13 14 14 14 14 14 14 14 15 15 15 16 16 16 16 16 16 17 18 18 18 18 18 19 19 20 20 20 20 20 22 22 22 22 24 24 25 25 25 25 26 26

310 460 610 1000 160 210 260 160 210 260 310 460 610 1000 160 260 460 210 260 310 460 610 1000 210 200 300 450 600 1000 200 450 200 300 450 600 1000 250 450 600 1000 250 450 250 300 450 1000 250 450

250 400 550 950 100 150 200 100 150 200 250 400 550 950 100 200 400 150 200 250 400 550 950 150 150 250 400 550 950 150 400 150 250 400 550 950 200 400 550 950 200 400 200 250 400 950 200 400

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

cod.

€ cad/each

031603101200 18,185 031604601200 23,572 031606101200 32,639 0316010001200 69,189 031601601300 15,139 031602101300 16,492 031602601300 18,185 031601601400 12,522 031602101400 15,139 031602601400 16,061 031603101400 20,248 031604601400 25,767 031606101400 40,917 0316010001400 81,160 031601601500 18,688 031602601500 22,648 031604601500 36,897 031602101600 21,447 031602601600 25,490 031603101600 25,982 031604601600 35,902 031606101600 42,343 0316010001600 86,834 031602101700 34,485 031602001800 27,757 031603001800 32,075 031604501800 41,503 031606001800 57,116 0316010001800 94,126 031602001900 44,477 031604501900 66,789 031602002000 31,932 031603002000 37,103 031604502000 46,744 031606002000 62,345 0316010002000 107,225 031602502200 39,788 031604502200 71,599 031606002200 80,203 0316010002200 123,250 031602502400 48,303 031604502400 67,570 031602502500 48,856 031603002500 87,613 031604502500 75,211 0316010002500 153,094 031602502600 57,014 031604502600 74,717

2 taglienti

K4 SUPERPRO

Corpo a 4 spirali indipendenti per un avanzamento più veloce ( 35%) ed un maggior scarico dei detriti. Corpo in acciaio legato con HRC 50 55. eometria della testa più snella e più aggressiva, per un’ottima trasmissione della potenza. Saldobrasatura a 1100°C in atmosfera di gas protettivo. 2

Preforo Pilot-hole mm

Higher speed and durability due to the unique 4-fold spirals (more dust removal, more feeding speed) unique and aggressive head geometry for a smooth power transmission. Body in alloy steel with HRC 50 55. Brazing temperature at 1100°C. Taglio ad altissimo rendimento a rotopercussione, su martelli SDS-plus, nel muro, cemento, calcestruzzo, pietre. Taglia anche il tondino di acciaio del cemento armato incontrato nella foratura. Superprofessional hammer drills for intensive usage in concrete, masonry, bricks, natural stone, etc..

528

ASSORTIMENTI PUNTE SDS-PLUS, QUALITÀ SUPER PROFESSIONALE “K 4” “K 4” Hammer drills sets

Art. 03163203

Art. 03163403

5 pcs Ø 5 6 x 110 mm Ø 8 10 12 x 160 mm

7 pcs Ø 5 6 8 x 110 mm Ø 6 8 10 12 x 160 mm

€ 40,613

€ 54,696

Art. 03163460

Art. 03163503

30 pcs Ø 6 14 mm

71 pcs Ø 5 16 mm

€ 742,478

€ 282,379

omposizione

Description

pcs.

6x160 8x160 10x160 12x160 10x210 12x210 14x210

5 5 5 5 5 3 2

390x150x225

5x110 6x110 5x160 6x160 8x160 9x160 10x160 12x160 6x210 8x210 10x210 12x210 14x210 16x210 8x260 10x260 12x260 14x260 16x260

pcs. 3 8 3 8 8 3 5 5 4 4 3 3 2 2 2 2 2 2 2

Campo di applicazione raccomandato per gli attacchi SDS per martelli Range of applications for the SDS shanks

SDS max

Ø 10

ASSORTIMENTI SETS

Ø 18

SDS plus

3,5

Ø Punta Ø Drill Bit

529

PUNTE PER TRAPANI A MARTELLO SDS-PLUS, QUALITÀ STANDARD Hammer drills

2 taglienti - qualità standard

03155

2 cutting edges - standard quality

SDS PL S

onfezione

Packaging

HVA 1650 2 taglienti 2 cutting edges 4 spirali 4 spirals

Applicazioni Applications

Muro Masonry

Calcestruzzo Concrete

Pietra Natural Stones

pcs.

4 4 5 5 5 5,5 5,5 5,5 6 6 6 6 6,5 6,5 6,5 6,5 7 7 8 8 8 8 8 8 9 9 10 10 10 10 10 10 10 10 10 11 11 11 12 12 12 12 12 12

110 160 110 160 210 110 160 210 110 160 210 260 160 210 260 310 110 160 110 160 210 260 310 460 160 210 110 160 210 260 310 360 460 610 1000 160 210 260 160 210 260 310 460 600

50 100 50 100 150 50 100 150 50 100 150 200 100 150 200 250 50 100 50 100 150 200 250 400 100 150 50 100 150 200 250 300 400 550 950 100 150 200 100 150 200 250 400 550

1 031551100400 1 031551600400 1 031551100500 1 031551600500 1 031552100500 1 031551100550 1 031551600550 1 031552100550 1 031551100600 1 031551600600 1 031552100600 1 031552600600 1 031551600650 1 031552100650 1 031552600650 1 031553100650 1 031551100700 1 031551600700 1 031551100800 1 031551600800 1 031552100800 1 031552600800 1 031553100800 1 031554600800 1 031551600900 1 031552100900 1 031551101000 1 031551601000 1 031552101000 1 031552601000 1 031553101000 1 031553601000 1 031554601000 1 031556101000 1 0315510001000 1 031551601100 1 031552101100 1 031552601100 1 031551601200 1 031552101200 1 031552601200 1 031553101200 1 031554601200 1 031556001200

cod.

cad/each

€

Ø mm

pcs.

cod.

cad/each

€

3,564 3,767 3,298 3,502 4,141 3,479 3,671 4,355 3,322 3,634 4,881 5,721 3,767 5,217 6,213 8,039 3,767 4,224 3,611 4,053 5,242 6,213 8,985 14,166 4,546 6,250 4,210 4,655 5,768 6,765 10,003 12,907 14,790 20,980 34,375 5,195 7,340 7,880 4,930 6,789 7,880 11,840 15,475 22,431

12 13 13 13 13 14 14 14 14 14 14 14 15 15 16 16 16 16 16 16 16 18 18 18 18 18 18 20 20 20 20 20 22 22 22 22 24 24 25 25 25 26 28 30

1000 160 210 260 460 160 210 260 310 460 600 1000 160 260 160 210 260 310 460 600 1000 210 260 310 460 600 1000 200 310 460 600 1000 250 460 600 1000 260 460 260 460 1000 460 460 460

950 100 150 200 400 100 150 200 250 400 550 950 100 200 100 150 200 250 400 550 950 150 200 250 400 550 950 150 250 400 550 950 200 400 550 950 200 400 200 400 950 400 400 400

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

0315510001200 031551601300 031552101300 031552601300 031554601300 031551601400 031552101400 031552601400 031553101400 031554601400 031556001400 0315510001400 031551601500 031552601500 031551601600 031552101600 031552601600 031553101600 031554601600 031556001600 0315510001600 031552101800 031552601800 031553101800 031554601800 031556001800 0315510001800 031552002000 031553102000 031554602000 031556002000 0315510002000 031552502200 031554602200 031556002200 0315510002200 031552602400 031554602400 031552602500 031554602500 0315510002500 031554602600 031554602800 031554603000

38,889 6,813 9,968 10,231 15,846 6,873 7,989 9,093 12,139 15,846 24,530 46,654 8,432 11,312 9,213 10,231 13,278 15,630 18,088 32,784 56,911 12,583 15,054 16,793 20,453 33,562 61,833 14,166 19,851 26,067 41,443 68,370 18,881 29,580 44,586 82,172 22,299 34,282 22,299 35,134 92,901 41,443 50,884 61,883

Preforo Pilot-hole mm

530

Ø mm

Taglio a rotopercussione, su martelli con attacco SDS-PL S, nel muro, cemento, calcestruzzo, pietre. Rotary percussion cut, with SDS plus hammers, in masonry, cement, reinforced concrete, natural and artificial stone.

ASSORTIMENTI PUNTE PER TRAPANI A MARTELLO SDS-PLUS Hammer drills sets

Art. 03165203

Art. 03165401

5 pcs Ø 5 6 x 110 mm Ø 8 10 12 x 160 mm

7 pcs Ø 5 6 8 x 110 mm Ø 6 8 10 12 x 160 mm

€ 24,219

€ 35,280

Art. 03165460

€ 167,774 30 pcs Ø 6 14 mm

omposizione

Description

pcs.

6x160 8x160 10x160 12x160 10x210 12x210 14x210

5 5 5 5 5 3 2

Art. 03165503

€ 502,096 71 pcs Ø 5 16 mm

omposizione

Description

390x150x225

5x110 6x110 5x160 6x160 8x160 9x160 10x160 12x160 6x210 8x210 10x210 12x210 14x210 16x210 8x260 10x260 12x260 14x260 16x260

pcs. 3 8 3 8 8 3 5 5 4 4 3 3 2 2 2 2 2 2 2

ASSORTIMENTI SETS

531

PUNTA DI GRANDE DIAMETRO PER MARTELLI SDS-MAX Breakthrough drill bit SDS-MA

SDS-MAX speciale grandi diametri

03171

SDS MAX - big diameters

onfezione

Packaging

Ø mm

pcs.

cod.

cad/each

€

40 45 45 55 55 65 65 80 80

550 550 990 550 990 550 990 550 990

100 100 100 100 100 100 100 100 100

1 1 1 1 1 1 1 1 1

031715504000 031715504500 031719904500 031715505500 031719905500 031715506500 031719906500 031715508000 031719908000

410,000 424,484 494,694 478,740 563,851 530,870 604,277 595,768 757,472

Integrale One piece

MADE IN GERMANY

Adatta per la foratura di grandi dimensioni ( 45 80 mm) con martelli SDS-MA in cemento, muratura, arenaria. Speciale per forature passanti per il passaggio di cavi e tubature. seful for drilling into large diameters ( 45 80 mm) with SDS-MA hammer tools into concrete, masonry, sandstone. Special for breakthrough cuts for cables and pipes.

Applicazioni Applications

Muro Masonry Calcestruzzo armato Reinforced Concrete Mattone Brick

ADATTATORE A CAMBIO RAPIDO SDS-MAX / SDS-PLUS SDS-MA / SDS-PL S adapter

SDS-MAX

532

SDS PL S

€

cod.

cad/each

03184101

220

88,211

PUNTE PER MARTELLI SDS-MAX SUPERPROFESSIONALI

Super professional hammer drills bits SDS-MA SDS-MAX

03170 ®

SDS MAX

onfezione

Packaging

130°

HVA 1650

MADE IN GERMANY

Applicazioni Applications

Muro Masonry Calcestruzzo armato Reinforced Concrete Pietra Natural Stones

Ø mm *12 *12 *12 *14 *14 *14 *14 *15 *15 16 16 16 16 16 18 18 18 18 18 19 20 20 20 20 20 22 22 22 22 22 24 24 25 25

340 200 540 400 740 600 340 200 540 400 740 600 940 800 340 200 540 400 340 200 540 400 740 600 940 800 1340 1200 340 200 540 400 740 600 940 800 1340 1200 520 400 320 200 520 400 720 600 920 800 1320 1200 320 200 520 400 720 600 920 800 1320 1200 320 200 520 400 320 200 520 400

pcs. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

cod.

€ cad/each

031703401200 51,609 031705401200 72,451 031707401200 101,448 031703401400 52,562 031705401400 72,451 031707401400 101,448 031709401400 130,899 031703401500 58,311 031705401500 78,605 031703401600 65,060 031705401600 75,324 031707401600 101,448 031709401600 133,414 0317013401600 278,150 031703401800 61,326 031705401800 83,075 031707401800 101,448 031709401800 133,414 0317013401800 299,551 031705201900 98,853 031703202000 71,797 031705202000 89,869 031707202000 99,889 031709202000 120,823 0317013202000 313,397 031703202200 76,371 031705202200 97,910 031707202200 103,682 031709202200 135,927 0317013202200 313,397 031703202400 88,950 031705202400 105,719 031703202500 105,719 031705202500 114,471

Ø mm 25 25 25 26 28 28 28 28 28 30 30 32 32 32 32 32 35 35 35 35 35 37 37 38 38 38 40 40 40 40 45 50 52

720 600 920 800 1320 1200 520 400 320 200 520 400 720 600 920 800 1320 1200 320 200 520 400 320 200 520 400 720 600 920 800 1320 1200 370 250 520 400 720 600 920 800 1320 1200 570 450 920 800 370 250 520 400 720 600 520 400 720 600 920 800 1320 1200 520 400 570 450 570 450

pcs. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

cod.

€ cad/each

031707202500 119,520 031709202500 183,754 0317013202500 332,273 031705202600 154,350 031703202800 121,451 031705202800 157,829 031707202800 185,521 031709202800 185,521 0317013202800 321,136 031703203000 137,184 031705203000 166,136 031703203200 143,481 031705203200 176,202 031707203200 215,754 031709203200 270,598 0317013203200 367,902 031703703500 169,917 031705203500 200,115 031707203500 240,400 031709203500 286,877 0317013203500 367,902 031705703700 264,315 031709203700 370,034 031703703800 187,536 031705203800 230,323 031707203800 240,400 031705204000 264,315 031707204000 270,598 031709204000 372,545 0317013204000 510,999 031705204500 329,177 031705705000 565,119 031705705200 565,119

2 taglienti 2 cutting edges

Caratteristiche Speciali placchette in M.D. per resistere all’urto sulla nuova generazione dei martelli pesanti da 5 Kg ed oltre. Testa più snella ma compatta per la geometria dei taglienti, facile penetrazione nel cemento. lica vario flute , per una più rapida evacuazione dei materiali. Risultati: 30% di efficienza nella foratura, maggiore durata dell’utensile, più resistenza agli impatti, minori vibrazioni, fori più profondi e precisi. Features Special cutting edges for a quick penetration into the hardest concrete. Large flute for a fast removal, strong reinforced web for a smooth cutting (no breakage, no vibrations).

Super PRO

4 taglienti 4 cutting edges 2 eliche ampie nuovo disegno dei denti 2 wide flutes new teeth design

Taglio ad altissimo rendimento, su martelli SDS-MA , nel muro, cemento, calcestruzzo, pietre, grazie alla placchetta estremamente aggressiva. L’accurata geometria della testa favorisce il centraggio e la perfetta circolarità del foro. La placchetta snella, con taglienti laterali inclinati e gli ampi canali di rimozione dei detriti consentono una velocità di foratura elevatissima, mantenendo un basso tenore di vibrazioni sul martello. Per fori superiori a 400 mm, utilizzare un preforo di 150÷200 mm dello stesso diametro. Superprofessional cut for hammer drills with SDS-MA chucking in concrete, masonry and natural stone.Smooth running, accurate hole, reduced vibrations due to its high quality.

533

PUNTE "DUST FREE" CON SISTEMA DI ASPIRAZIONE DELLA POLVERE Special drill bits with dust suction system

03172

onfezione

Packaging

MADE IN GERMANY

Con aspirazione polveri

SDS PLUS

With dust suction system

Ø mm

pcs.

cod.

cad/each

€

12 14 16 18

330 360 360 360

200 240 240 240

1 1 1 1

031723301200 031723601400 031723601600 031723601800

129,031 136,381 143,731 172,320

Applicazioni Applications

Muro Masonry Calcestruzzo armato Reinforced Concrete Pietra Natural Stones

Compatibili con qualsiasi aspiratore la polvere viene incanalata nei fori e raccolta in un aspiratore collegato mediante l’adattatore in dotazione. Compatible with any vacuum dust is channeled into the holes and collected in a vacuum cleaner connected via the adapter provided.

Caratteristiche - Ideale per effettuare fori nel cemento armato per i quali sia previsto l’inserimento di ancorante chimico, evita la lunga e laboriosa procedura di pulizia del foro garantendo un risultato ottimale (Avvertenza: per la sistemazione di tasselli, attenersi comunque sempre alle indicazioni del produttore dei tasselli stessi) - Riduce la dispersione di polveri nell’ambiente di lavoro - Permette una foratura più veloce ed efficiente grazie all’immediata rimozione del materiale di scarto che nelle punte tradizionali si interpone tra i taglienti e la superficie da forare - Compatibile con qualsiasi aspiratore reperibile sul mercato (si raccomanda l’utilizzo di aspiratori in classe M per una più efficace riduzione delle polveri nell’ambiente di lavoro) - La speciale forma della testa a quattro taglienti (per diametri ≤ 28mm) o a 2 taglienti con grandi fori di aspirazione (per diametri ≥ 28mm) evita l’inceppamento della punta anche nei lavori più gravosi di foratura del cemento armato. - La speciale forma del gambo delle punte con diametro > 28 agevola la centratura del foro e ne migliora la maneggevolezza. Features - Ideal to work in to reinforced concrete for which the insertion of a chemical anchor is foreseen, this technology avoids the long and laborious cleaning procedure of the hole guaranteeing an optimal and faster result. (Warning: for the installation of dowels, always follow the manufacturer’s instructions dowels themselves). - It reduces the dispersion of dust in the working environment. - It allows a faster and more efficient drilling due to the immediate removal of the debris which normally interposes between the cutting edges of the drill and the surface to be worked. - Compatible with any vacuum cleaner available on the market (the use of class M vacuum cleaners is recommended for a more effective reduction of dust in the workplace) - The head with 4 cutting edges (2 cutting edges for measures ≤ 28mm) avoids the jamming of the tip even in the most difficult jobs of drilling reinforced concrete. - The special shape of the shank of the drills with a diameter> 28 facilitates the centering of the hole and improves its handling.

534

PUNTE "DUST FREE" CON SISTEMA DI ASPIRAZIONE DELLA POLVERE Special drill bits with dust suction system

03172

Con aspirazione polveri

SDS MA

With dust suction system

onfezione

Packaging

MADE IN GERMANY

Ø mm

pcs.

cod.

cad/each

€

16 18 20 22 24 25 28 28 30 30 32 32 35 35

600 600 600 600 600 600 600 900 600 900 600 900 600 900

400 400 400 400 400 400 400 700 400 700 400 700 400 700

1 1 1 1 1 1 1 1 1 1 1 1 1 1

031726001600 031726001800 031726002000 031726002200 031726002400 031726002500 031726002800 031729002800 031726003000 031729003000 031726003200 031729003200 031726003500 031729003500

300,539 312,781 325,035 329,939 351,166 339,735 380,500 565,139 400,525 586,366 410,350 615,766 430,500 632,100

Applicazioni Applications

Muro Masonry

Compatibili con qualsiasi aspiratore

Calcestruzzo armato Reinforced Concrete

la polvere viene incanalata nei fori e raccolta in un aspiratore collegato mediante l’adattatore in dotazione.

Pietra Natural Stones

Compatible with any vacuum dust is channeled into the holes and collected in a vacuum cleaner connected via the adapter provided.

ADATTATORI PER PUNTE "DUST FREE" "D ST FREE" Connector to the dust aspirator

SDS PLUS

Attacco Attachment

cod.

cad/each

€

SDS PL S SDS MAX

03172ADATTSDS 031 2ADATTMAX

26,131 27,766

SDS MA

535

CORONE PERFORATRICI PER EDILIZIA CON ATTACCO CONICO PER MARTELLI PESANTI Hammer core bits with taper chucking

Attacco conico - Uso intensivo

21120

Taper chucking - Intensive use

onfezione

Packaging

Ø corona core bit

35 40 45 50 60 66 70 80 90 100 110 125 130 150

100 100 100 100 100 100 100 100 100 100 100 100 100 100

Z n. denti tips

pcs.

cod.

cad/each

€

4 5 5 6 6 7 8 8 8 10 12 12 12 14

1 1 1 1 1 1 1 1 1 1 1 1 1 1

2112003500 2112004000 2112004500 2112005000 2112006000 2112006600 2112007000 2112008000 2112009000 2112010000 2112011000 2112012500 2112013000 2112015000

54,775 61,549 72,135 84,074 86,226 101,515 112,995 126,897 145,024 170,404 187,330 216,334 267,086 292,469

Attacco conico 1:8 1:8 taper attachment

Asta porta corona senza asola Shank without slot

Applicazioni Applications

SDS Max Muro Mansonry

Calcestruzzo Concrete

Millerighe Ø 19,3 mm Large spline shank

Pietre Stones

HEX SW 13

randi rendimenti nel calcestruzzo, muro, pietre calcaree. High performances in masonry- concrete, sand-lime brick, natural stone. Uso rotopercussione su trapani pesanti > 45 N e con poten a 900W fino a 1500W

SDS Max

cod.

Ø mm

cad/each

21130110

12x135

11,664

Estrattore per punte pilota Drill drift

536

L mm

cad/each

€

21130211 21130220 21130225

250 450 600

61,267 67,103 81,325

cod.

L mm

cad/each

21130235 21130245

250 600

57,040 77,507

cod.

L mm

cad/each

21130255 21130260 21130265

250 450 600

57,040 61,579 77,507

cod.

L mm

cad/each

21130011 21130020 21130025

250 450 600

61,267 67,103 81,325

cod.

L mm

cad/each

21130035 21130040 21130045

250 450 600

57,040 61,579 77,507

€

Asta porta corona con asola Shank with slot

Hammer drill use > 45 N and electrical power > 900W

Punta pilota Pilot drill

cod.

€

Millerighe Ø 19,3 mm Large spline shank

€

cod.

cad/each

cod.

L mm

cad/each

281580102

8,540

21130055 21130060 21130065

250 450 600

57,040 61,579 77,507

€

HEX SW 13

€

CORONE PERFORATRICI PER EDILIZIA CON FILETTO A MOLLA PER MARTELLI PESANTI SDS-MAX Hammer core bits with taper chucking

Attacco filettato con molla - Uso intensi o

21122

With spring thread - Intensive use

onfezione

Packaging

Ø corona core bit

L mm

Z n. denti tips

pcs.

cod.

cad/each

€

40 50 60 66 70 80 90 100 110 125 150

100 100 100 100 100 100 100 100 100 100 100

5 6 6 7 8 8 8 10 12 12 14

1 1 1 1 1 1 1 1 1 1 1

2112204000 2112205000 2112206000 2112206600 2112207000 2112208000 2112209000 2112210000 2112211000 2112212500 2112215000

61,612 84,723 102,303 120,906 159,278 162,760 175,553 191,825 202,286 249,955 309,247

Asta porta corona Shank SDS Max Applicazioni

Con molla With spring

Applications

Muro Mansonry

Calcestruzzo Concrete

Molla di accoppiamento Coupling spring

Pietre Stones

Punta pilota Pilot drill

cod.

L mm

cad/each

€

21130300 21130305 21130310

250 450 600

78,323 100,867 136,468 €

cod.

cad/each

21130316

1,105

cod.

ØxL mm

cad/each

€

21130315

12x135

9,993

cod.

ØxL mm

cad/each

21130317

9,5x100

4,745

Uso rotopercussione su trapani pesanti > 45 N e con poten a 900W fino a 1500W Hammer drill use > 45 N and electrical power > 900W

Estrattore per punte pilota Drill drift

€

randi rendimenti nel calcestruzzo, muro, pietre calcaree. Corona sempre smontabile grazie alla molla di accoppiamento. High performances in masonry- concrete, sand-lime brick, natural stone. Easy removable

Espositore corone perforatrici per edilizia con filetto a molla Hammer core bits with spring thread set Composizione ØxL Description mm Art. 21116117

€ 1.513,268 29 pcs Ø 40÷100

Ø 40 50 60 66 80 90 100 (1x) 21130300 (3x) 21130305 (3x) 21130315 (6x)

21130316 (10x)

537

FRESE PERFORATRICI A TAZZA “IMPACT” PER EDILIZIA PER MARTELLI LEGGERI Masonry impact core bits for light hammers

Attacco filettato M16

21110

M16 Threaded connection onfezione

Packaging

Uso rotopercussione su trapani e piccoli martelli sino 40 N Rotary percussion use

Ø fresa hole cutter

25 30 35 40 45 50 65 80 90 100 112 125 150

75 75 75 75 75 75 75 75 75 75 75 80 80

Z n. denti tips

pcs.

cod.

cad/each

4 4 4 4 4 6 6 6 6 8 8 10 12

1 1 1 1 1 1 1 1 1 1 1 1 1

2111002500 2111003000 2111003500 2111004000 2111004500 2111005000 2111006500 2111008000 2111009000 2111010000 2111011200 2111012500 2111015000

27,040 30,788 36,885 40,487 42,987 45,410 56,444 82,855 88,455 107,155 123,341 153,255 206,826

50 50 40

600 800

€

M 16 Foratura a rotopercussione su trapani e piccoli martelli nel calcestruzzo, cemento, pietre. Massima profondità di foratura 60 mm. se with hammer drills up to 40 N in masonry and concrete (60 mm drill depth).

Applicazioni Applications

Muro Mansonry

Attacco filettato M22

21111

M22 Threaded connection onfezione

Packaging

Uso rotopercussione su trapani e piccoli martelli sino 40 N Rotary percussion use

Ø fresa hole cutter

50 55 60 65 68 80 90 100 112 125 150

75 75 75 75 75 75 75 75 75 80 80

Z n. denti tips

pcs.

cod.

cad/each

6 6 6 6 6 6 6 8 8 10 12

1 1 1 1 1 1 1 1 1 1 1

2111105000 2111105500 2111106000 2111106500 2111106800 2111108000 2111109000 2111110000 2111111200 2111112500 2111115000

44,048 50,599 52,211 54,750 65,267 80,370 85,802 103,940 119,641 148,658 200,621

50 40

M 22

Applicazioni Applications

Muro Mansonry

538

800

€

Foratura a rotopercussione su trapani e piccoli martelli nel calcestruzzo, cemento, pietre. Massima profondità di foratura 60 mm. se with hammer drills up to 40 N in masonry and concrete (60 mm drill depth).

GAMBI PER FRESE PERFORATRICI A TAZZA “IMPACT” Chucking shanks for “Impact” core bits Gambo esagonale ex. shan

cod.

Attacco filettato Thread attachment

Lunghezza tot. Overall length

cad/each

M 16 x 2

HEX 12

21115501 21115502 21115503

M 16 x 2 M 16 x 2 M 16 x 2

100 mm 220 mm 3 0 mm

14,009 20,689 31,817

M 22 x 2,5

HEX 12

21115521 21115522 21115523

M 22 x 2,5 M 22 x 2,5 M 22 x 2,5

100 mm 220 mm 3 0 mm

18,837 27,993 39,636

Attacco filettato Thread attachment

Lunghezza tot. Overall length

cad/each

SDS PL S

21115504 21115505 21115507 21115509

M 16 x 2 M 16 x 2 M 16 x 2 M 16 x 2

100 mm 220 mm 3 0 mm 460 mm

18,837 27,993 39,636 62,309

SDS PL S

21115524 21115525 21115527 21115529

M 22 x 2,5 M 22 x 2,5 M 22 x 2,5 M 22 x 2,5

100 mm 220 mm 3 0 mm 460 mm

18,837 27,993 39,636 62,309

Attacco filettato Thread attachment

Lunghezza tot. Overall length

cad/each

M 22 x 2,5

3 0 mm

74,467

Gambo SDS PLUS SDS PLUS shank

cod.

M 16 x 2

M 22 x 2,5

Gambo SDS MAX* SDS MAX shank*

cod. SDS MAX

M 22 x 2

21115520

Punta pilota Pilot drill *

€

se with light building materials only.

,25 mm

€

cod.

ØxL mm

cad/each

€

21115506

8 x 120

5,074

ESPOSITORE FRESE “IMPACT” PER EDILIZIA Masonry core bits set

cod.

Attacco filettato Thread attachment

21110

M 16

Ø pcs.

21111

M 22

Ø pcs.

21115501

(M 16)

21115502

(M 16)

30 35 40 1 1 1 50 65 80 90 100 1 1 1 1 1 L 100 mm N° 1 pc

HEX 12

21115521

(M 22)

L 100 mm N° 1 pc

21115522

(M 22)

L 220 mm N° 1 pc

21115504

(M 16)

L 100 mm N° 1 pc

21115505

(M 16)

L 220 mm N° 1 pc

21115524

(M 22)

L 100 mm N° 1 pc

21115525

(M 22)

L 220 mm N° 1 pc

SDS PL S Art. 21116112

€ 718,029

24 pcs Ø 30 100 mm

L 220 mm N° 1 pc

21115506

Ø 8 mm N° 8 pcs

539

FRESE PERFORATRICI A TAZZA CON TAGLIENTI IN METALLO DURO PER EDILIZIA Carbide tipped hole cutters for masonry, rotation only

21015

MD onfezione

Packaging

Ø h fresa altezza tazza n. denti hole cutter height cup n. tips 16 22 25 27 30 35 38 40 45 50 55 60 65 70 80 85 100 125 150

40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40

d gambo shank

pcs.

cod.

cad/each

10 10 10 10 10 10 10 10 10 10 12 12 12 12 12 12 12 12 12

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

2101501600 2101502200 2101502500 2101502700 2101503000 2101503500 2101503800 2101504000 2101504500 2101505000 2101505500 2101506000 2101506500 2101507000 2101508000 2101508500 2101510000 2101512500 2101515000

22,467 23,919 31,439 32,543 33,336 36,238 39,860 42,750 47,105 50,728 61,595 67,401 76,097 81,148 100,004 119,100 149,460 192,667 287,248

2 3 3 3 4 4 5 5 5 6 6 7 7 8 9 10 11 12 15

€

tilizzo a rotazione Rotary use only

Applicazioni Applications

Muro Mansonry

Calcestruzzo Concrete

eramica Ceramics

Gambo Arbor 3 Pianetti / 3 Flats

Forano a sola rotazione calcestruzzo leggero, muro, piastrelle, ceramica, laminati plastici. Adatti per fori precisi a pavimento di porte blindate, fori per condotte, scatole di derivazione, etc…

Punta pilota Pilot drill

Rotary use in masonry, tiles, light construction materials.

Prolunga 400 mm Extension 400 mm 3 Pianetti / 3 Flats

cod.

Per frese Fit hole cutters

€

21020100

Ø 16 ÷ 35

12x1,25

5,841

21020101

Ø 38 ÷ 150

16x1,5

17,210

cod.

Per frese Fit hole cutters

Ø mm

cad/each

21020110

Ø 16 ÷ 50

5,85

4,469

21020111

Ø 55 ÷ 150

7,25

5,880

cod.

Per frese Fit hole cutters

21020120

Ø 16 ÷ 50

12x1,25

33,340

21020121

Ø 55 ÷ 150

16x1,5

49,781

cad/each

€

€ cad/each

400 mm

Art. 21030110

Set frese a tazza per impiantisti, idraulici, etc. Hole cutters set for journeymen and plumbers.

€ 590,227

12 pcs Ø 22 25 2 30 35 38 40 45 50 55 60 65

540

Art. 21030300

Art. 21030301

8 pcs Ø 16 22 25 2 30 35 40 50

6 pcs Ø 16 22 25 2 30 35

€ 331,405

€ 225,640

FRESE A TAZZA CON DENTI RIVESTITI IN CARBURO DI TUNGSTENO IN GRANI PER MATERIALI EDILI DURI, GRES, PIASTRELLE, GRANITO, ETC. Carbide grit hole saws, high quality

21105

Per materiali edili duri

For hard building materials onfezione

Packaging

Ø mm

Ø pollici / inch

d filetto / thread

16 19 20 22 25 29 32 35 38 44 48 51 54 57 60 64 70 76 83 86 95 102 114

5/8 3/4

NF 1/2 x 20

L 40 48 mm

Inserti in carburo di tungsteno Carbide grit

Spessore lavorabile Material tickness workable

S max 5

Art. 21135 Self Disponibile su richiesta On demand

7/8 1” 1 1/8 1 1/4 1 3/8 1 1/2 1 3/4 1 /8 2” 2 1/8 2 1/4 2 3/8 2 1/2 2 3/4 3” 3 1/4 3 3/8 3 3/4 4” 4 1/2

NF 5/8 x 18

€

pcs.

cod.

cad/each

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

17,873 17,873 18,292 18,292 18,292 19,024 20,140 20,800 22,263 24,373 24,373 24,373 24,373 24,735 25,863 25,863 30,876 31,942 32,988 34,007 34,380 34,380 40,687

tilizzo a rotazione Rotary use only R ≤ 1200 N/mm2

Per frese gambi / alberi Fit hole cutters

Applicazioni Applications

Piastrelle Mattoni durissimi Tiles Hard burnt brick

Pietre naturali Marmo Stones Marble

eramica Ceramics

Fibra di vetro Laminati plastici Fiberglass

cod. 210706519

13,338

210706546

23,339

Punta pilota con placchetta in MD Pilot drill Ø

cod.

Ø 7x80

6,3 mm

Art. 21107301

€ 104,976

1 pcs Art. 210706519 Ø 16÷29 N. 1 pc

6 pcs Art. 21105 Ø 16 20 22 25 32 35 mm (1x)

1 pcs Art. 210706546 Ø 32÷114 N. 1 pc

€ cad/each

21020112

€ cad/each

13,116

FRESA A TAZZA MULTIPLA PER EDILIZIA IN CARBURO DI TUNGSTENO IN GRANI Multiple sizes carbide grit hole saw

21108

Ø mm

pcs.

cod.

cad/each

€

33-43-53-67-83

21108100

53,309

h 60mm ualit standard Standard quality

Applicazioni Applications

onfezione

Packaging

Mattoni brick

541

FRESA A TAZZA A CORONA CONTINUA PER IL TAGLIO DEL GRES PORCELLANATO E DEI MATERIALI EDILI DURISSIMI

Diamond drill bit and core drills with continuous edge for sandware and very strong building materials

Attacco M14 per smerigliatrici angolari

21106

M14 connection for angle grinders

onfezione

Packaging

Matrice metallica altofondente brasata che trattiene i diamanti a grana medio fine The high-melting brazed bond keeps medium-fine grain diamonds

Attacco M14 speciale per smerigliatrici angolari M14 shank M14 shank to fit angular grinding machine

Ø mm

pollici inches

pcs.

cod.

cad/each

€

*6 *8 *10 *12 *14 *16 *18 20 22 25 28 30 32 35 40 45 50 55 60 65 67 70 80 90 100

15/64 5/16 25/64 15/32 35/64 5/8 23/32 25/32 7/8 1" 1 1/16 1 3/16 1 1/4 1 3/8 1 9/16 1 49/64 2" 2 11/64 2 3/8 2 9/16 2 5/8 2 3/4 3 5/32 3 9/16 4"

62 62 62 62 62 62 62 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

211060600 211060800 211061000 211061200 211061400 211061600 211061800 211062000 211062200 211062500 211062800 211063000 211063200 211063500 211064000 211064500 211065100 211065500 211066000 211066500 211066700 211067000 211068000 211069000 2110610000

40,868 41,574 41,574 43,516 46,685 48,472 49,886 49,904 51,817 56,481 62,292 67,042 71,585 78,338 89,635 100,684 108,172 122,787 133,837 144,887 149,798 157,167 178,040 194,852 228,077

* Con cera vegetale all'interno / With internal coolant.

Applicazioni Applications

Grès porcellanato Porcelain stoneware

r s smaltato Glazed stoneware

Grès Stoneware

Marmo Marble

Piastrella standard Standard tile

Prestazioni di una fresa diamantata di Ø 6 mm a corona continua nella foratura di una piastrella in gres porcellanato con raffreddamento ad acqua: invertendo periodicamente il senso di rotazione della fresa da orario ad antiorario si ravvivano i diamanti e la fresa continua a lavorare per un ciclo di vita utile più lungo. Nel grafico si mostra come, all’inversione del senso di rotazione, la fresa completa il foro con un tempo comparabile ai primi fori effettuati quando l’utensile era nuovo. Performances of 6 mm diamond core bit with continuous edge when water cooled cutting into sandware: if you cyclically change from clockwise to anti-clockwise rotation you can revive the diamonds thus assuring a longer tool life. Here below the graphics that shows you that, starting the anti-clockwise rotation, the tool can complete the hole briefly, just as it were new.

542

PRCD Massima profondit di foratura 10 mm. elocit di rotazione consigliata 10.000 13.000 giri/min. Maximum drilling depth 10 mm. Recommended rotational speed 10,00013,000 rpm.

Art. 21103315

Art. 21103310

5 pcs Ø 6 8 10 12 14 mm

6 pcs Ø 22 35 40 45 50 6 mm

€ 232,142

€ 627,479

PUNTA DIAMANTATA A CORONA CONTINUA PER IL TAGLIO A SECCO E UMIDO DEL GRESPORCELLANATO E DI TUTTE LE PIASTRELLE Diamond drill bit with continuous edge for dry cutting of sandware and very hard building materials

Con cera vegetale refrigerante

03122 onfezione

Packaging

Ø mm

5 6 8 10 12 14 16 18 20 22 25

9,5 9,5 9,5 9,5 9,5 12,5 12,5 12,5 12,5 12,5 12,5

pcs.

cod.

cad/each

70 70 80 80 80 80 80 80 80 80 80

1 1 1 1 1 1 1 1 1 1 1

031220500 031220600 031220800 031221000 031221200 031221400 031221600 031221800 031222000 031222200 031222500

43,128 43,128 43,128 43,128 47,921 59,246 65,826 73,508 81,188 88,867 100,936

Movimento circolare Circular movement

€

PRCD

tilizzando trapani elettrici adottare il sistema di sicurezza PR D PRCD safety system Syst me de s curit PRCD Despositivo de seguridad PRCD A secco (refrigerante vegetale) Dry cutting (vegetable refrigerant)

Refrigerante vegetale nternal cooling system

Foratura a secco a sola rotazione. Funzionamento ottimale su pareti verticali (ottimizzato il sistema di refrigerazione interna). Si consiglia di non asportare la carota, che funge da tappo dosatore per il refrigerante.

Matrice metallica altofondente brasata che trattiene i diamanti a grana medio fine The high-melting brazed bond keeps medium-fine grain diamonds

Dry cutting, rotation use only. est performances on walls to better fit the internal cooling system. Do not remove the deposits: they work as a plug to stop the lubricant. Water cooling extends the tool life cycle. Iniziare il taglio inclinando la fresa di 30 per agevolare la centratura (oppure utilizzare l’apposita guida). Portarsi gradualmente in posizione verticale. sare una velocit di taglio di 1000 3000 giri/min in funzione del diametro decrescente della fresa. Durante il taglio applicare un lieve movimento circolare per agevolare l’evacuazione dei detriti. Invertendo periodicamente il senso di rotazione della fresa, si ravvivano i diamanti e si allunga la vita utile dell’utensile. tilizzando trapani elettrici e raffreddando ad ac ua, dotarsi di dispositivo PR D.

Applicazioni Applications

Grès porcellanato Porcelain stoneware

r s smaltato Glazed stoneware

Nel caso si voglia inserire un tassello(3), terminato il taglio nel gres(1), continuare con una punta per muro tradizionale a rotopercussione (2). Use tips: To achieve an easy centering, please start the cut at 30 (or use the proper guide) and then go on vertically. se 1000 3000 rpm as cutting speed, depending on the decreasing tool diameter. Please use a circular movement during cutting to better evacuate the deposits. For longer tool life, please use alternatively right and left hand rotation. When water cooling, always use PRCD safety system.

Grès Stoneware

Marmo Marble

Piastrella standard Standard tile

547

03121001

03121002

Diametro fresa Cutter diameter

5÷7

8÷10

12÷14

Velocità giri/min. RPM speed

3000

2000

1500

03121005

Art. 03120300

Art. 03120301

Art. 03120210

15 pcs Ø 5 25 mm

3 pcs Ø 6 8 10 mm

€ 938,134

€ 667,205

8 10 12

14 16 18 20 22 25

pcs

pcs 1 2 2 2

€ 128,487

5 6 8 10 12 14 16 20 1

543

KERAMSTER PLUS

With internal cooling system

PUNTA DIAMANTATA A CORONA CONTINUA PER IL TAGLIO A SECCO E UMIDO DEL GRESPORCELLANATO E DI TUTTE LE PIASTRELLE

Rotary percussion drill bits “max 4” with 4 cutting edges and 4 flutes for cutting concrete and building materials

03117 KERAMSTER

onfezione

Packaging

Ø mm

5 6 7 8 10 12 14

9,5 9,5 9,5 9,5 9,5 9,5 9,5

€

pcs.

cod.

cad/each

56 56 56 56 56 56 56

1 1 1 1 1 1 1

031170500 031170600 031170700 031170800 031171000 031171200 031171400

25,058 25,058 25,058 25,058 27,658 32,441 44,390

2 45°

Matrice metallica altofondente brasata che trattiene i diamanti a grana medio fine The high-melting brazed bond keeps medium-fine grain diamonds

1 tilizzando trapani elettrici adottare il sistema di sicurezza PR D PRCD safety system Syst me de s curit PRCD Despositivo de seguridad PRCD

FORATURA AD ACQUA Wet drilling

Art. 03120199

€ 83,896

3 pcs Ø 6 8 10 mm

Art. 03120200

€ 108,307

4 pcs Ø 5 6 8 10 mm

Art. 03120201

€ 139,448

5 pcs Ø 5 6 8 10 12 mm

Retrodidattica Back side

230x510x170 Art. 03120101

Art. 03120100

pcs Ø/pcs 5/8 6/8 /3 8/6 10/5 12/3 14/3

pcs Ø/pcs 5/6 6/6 /2 8/6 10/5 12/3 14/2

€ 1.026,182

€ 902,654

Diametro fresa Core drill diameter

5 7

8÷10

12÷14

16÷25

28 35

40÷50

60÷80

Velocità giri/min. Speed r.p.m.

3000

2000

1500

1000

600

400

300

Taglio preciso e pulito con trapani e con raffreddamento ad acqua in tutti i materiali edili difficili da lavorare: gres porcellanato, gres smaltato, marmo, granito, ceramica, ardesia, materiali compositi quali poliestere, fibre di vetro, ecc. Nel caso si voglia inserire un tassello, terminato il taglio nel gres, continuare con una punta per muro tradizionale a rotopercussione. Per idraulici, installatori, elettricisti, ecc. For an accurate and sharp cut with drilling machines of all hard materials: sandware, glazed sandstone, marble, granite, ceramics, slate, composites such as polyester, fiber glass, etc. Ideal for plumbers, journeymen, electricians, etc. Water cooling.

544

PUNTA DIAMANTATA A CORONA CONTINUA PER IL TAGLIO A SECCO E UMIDO DEL GRESPORCELLANATO E DI TUTTE LE PIASTRELLE

Rotary percussion drill bits “max 4” with 4 cutting edges and 4 flutes for cutting concrete and building materials

onfezione

Packaging

l L

Ø mm

16 18 20 22 25 28 30 32 35 40 45 50 60 65 67 70 80

12,5 12,5 12,5 12,5 12,5 12,5 12,5 12,5 12,5 12,5 12,5 12,5 12,5 12,5 12,5 12,5 12,5

€

pcs.

cod.

cad/each

90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90

50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

211041600 211041800 211042000 211042200 211042500 211042800 211043000 211043200 211043500 211044000 211044500 211045000 211046000 211046500 211046700 211047000 211048000

59,677 59,677 64,870 71,359 79,792 88,224 94,714 97,305 114,169 128,445 144,013 158,288 186,824 201,100 210,929 223,678 245,205

KERAMSTER

21104

Applicazioni

tilizzando trapani elettrici adottare il sistema di sicurezza PR D PRCD safety system Syst me de s curit PRCD Despositivo de seguridad PRCD

Applications

Grès porcellanato Porcelain stoneware

Marmo Marble

r s smaltato Glazed stoneware

Piastrella standard Standard tile

Punta pilota con placchetta in MD Pilot drill

FORATURA AD ACQUA Wet drilling

cod.

Ø mm

cad/each

21020113

Ø 6x100

4,469

Grès Stoneware

€

400x650x320

Art. 21103100

Art. 21103300

pcs Ø5 6

6 pcs Ø 16 22 25 28 30 35 mm

€ 1.251,668 8 10 12 14 (2x)

Ø 16 20 25 28 30 32 35 (1x)

€ 535,883

Art. 21103101

€ 2.143,522 pcs Ø5 6 8 10 12 14 16 18 20 25 30 (2x) Ø 35 50 60 65 80 (1x)

Si sconsiglia l’uso della punta pilota come centraggio nel gres porcellanato; la dima a ventosa consente un’agevole centratura e sicurezza di taglio. We dissuade to use the pilot drill as centering into sandware; the suction guide allows an easy centering with a safe cut.

ASSORTIMENTI SETS

Punta diamantata a corona continua Continuous diamond edge

Doppio scarico per evacuazione detriti Double cut to eject the deposits Scarico laterale per espulsione carota Lateral opening for ejecting the core

545

PUNTA DIAMANTATA A CORONA CONTINUA PER IL TAGLIO DI PIASTRELLE, GRES E DEI MATERIALI DURI

Diamond drill bit with continuous edge for sandware and strong building materials Qualità Standard

03125 Matrice metallica elettrodepositata che trattiene diamanti a grana fine.

Standard quality

onfezione

Packaging

The electroplated bond keeps fine grain diamonds.

Ø mm

d mm

pcs.

cod.

cad/each

€

5 6 8 10 12 14

6 6 6 6 6 6

65 65 65 65 65 65

1 1 1 1 1 1

031250500 031250600 031250800 031251000 031251200 031251400

12,413 12,413 12,413 12,413 14,894 17,377

2 45°

Applicazioni Applications

Grès Stoneware

1 tilizzando trapani elettrici adottare il sistema di sicurezza PR D PRCD safety system Syst me de s curit PRCD Despositivo de seguridad PRCD

FORATURA AD ACQUA Wet drilling

La corona diamantata a spessore sottile garantisce tagli senza sbavature. Questa caratteristica agevola i lavori di foratura su piastrelle dure in posa, dove sia necessario realizzare un foro pulito, senza scheggiare la piastrella. The thin diamond continuous edge guarantees cuts without smudging. This feature facilitates the drilling work on hard tiles in laying, where it is necessary to make a clean hole, without splintering the tile.

Marmo Marble

Piastrella standard Standard tile

546

Diametro fresa Core drill diameter

5÷7

8÷10

12÷14

Velocità giri/min. Speed r.p.m.

3000

2000

1500

DIMA A VENTOSA PER FORARE Drilling suction cup

03121

Art. 03121001

€ 39,861

7 fori / 7 holes Ø4 5 6 8 10 12 mm

DIMA A VENTOSA REGOLABILE PER FORARE Drilling suction cup

Art. 03121002

€ 59,211

30÷80

5÷30

BOTTIGLIA PER REFRIGERAZIONE 1L 1L Cooling bottle

Art. 03121005

€ 22,772

547

DISCHI DIAMANTATI PER MATERIALI EDILI Diamond discs for building materials

Corona Turbo

03405

Turbo continuous rim

onfezione

Packaging

Ø mm

cod.

cad/each

€

115 230

22.2 22.2

03405115 03405230

11,992 56,344

Applicazioni Applications

Muro Masonry

Calcestruzzo Concrete

Pietre naturali Natural stones

Piastrelle Tiles

Corona continua

03400

Continuous rim

onfezione

Packaging

Ø mm

cod.

cad/each

€

115 230

22.2 22.2

03400115 03400230

10,306 45,550

Applicazioni Applications

Pietre naturali Natural stones

Piastrelle Tiles

Pietra ranito Natural stones granit

Corona segmentata

03410

Segmented rim

onfezione

Packaging

Ø mm

cod.

cad/each

115 230

22.2 22.2

03410115 03410230

11,300 55,844

Applicazioni Applications

Muro Masonry

548

Calcestruzzo Concrete

Pietre naturali Natural stones

Pietra ranito Natural stones granit

PRCD

€

DISCHI DIAMANTATI PER MATERIALI EDILI Diamond discs for building materials

Art. 03412100

€ 32,361 3 pcs

omposizione Description cod. 03405115 T RBO N. 1 cod. 03400115 ONTIN E N. 1 cod. 03410115 SEGMENTED N. 1

DISCHI DIAMANTATI PER GRES PORCELLANATO, CERAMICA E PIASTRELLE IN GENERE Diamond discs for sandware, tiles and ceramics

Corona Turbo - Speciale Gres porcellanato

03515

Turbo continuous rim - Special Gres

onfezione

Packaging

Ø mm

cod.

cad/each

€

115

22.2

03515115

40,750

1,2 mm

Applicazioni Applications

Grès porcellanato Porcelain stoneware

r s smaltato Glazed stoneware

Grès Stoneware

Marmo Marble

Piastrella standard Standard tile

PRCD

549

SCALPELLI DI QUALITÀ PREMIUM PER MARTELLI DEMOLITORI SDS-PLUS

Premium quality chisels for SDS-PL S hammers Qualità Premium

AUTO AFFILANTE

03221

Premium performance

Self-Sharpening

onfezione

Packaging

Scalpelli a punta Pointed chisels

MADE IN ITALY

L mm

250

€

cod.

cad/each

0322102250

18,552

cod.

cad/each

0322106020250

18,552

onfezione

Packaging

Scalpelli piatti Flat cold chisels

59,5

L mm

250

€

24,5

Alta Qualità

03220

High performance Scalpelli a punta Pointed chisels

MADE IN ITALY Ø

Scalpelli piatti Flat cold chisels

Scalpelli piatti larghi Spade chisels

59,5 24,5

25°

L mm

250

€

cod.

cad/each

0322002250

12,423

cod.

cad/each

0322001020250

12,423

cod.

cad/each

L mm

€

250

L mm

250

0322003040250

18,780

260

0322003040260

37,796

250

0322004022250

25,530

250

0322005022250

68,617

€

Art. 03281100

€ 41,760 3 pcs

omposizione

Description

250 20x250 40x250 550

SCALPELLI DI QUALITÀ STANDARD PER MARTELLI DEMOLITORI SDS-PLUS

Standard quality chisels for SDS-PL S hammers Qualità Standard

03222

Standard quality

SDS PLUS

Scalpelli a punta Pointed chisels

L mm

250

€

cod.

cad/each

0322202250

8,232

Scalpelli piatti Flat cold chisels

L mm

250

L mm

250

25°

Scalpelli piatti larghi Spade chisels

59,5 24,5

€

cod.

cad/each

0322201020250

8,232

cod.

cad/each

0322203040250

12,466

160

032220775160

21,345

250

032220740250

13,289

€

Art. 03281120

€ 23,520 3 pcs

omposizione

Description

250 20x250 40x250

551

SCALPELLI DI ALTA QUALITÀ PER MARTELLI DEMOLITORI SDS-MAX

High quality chisels for SDS-MA hammers Alta Qualità

03210

High performance Scalpelli a punta Pointed chisels

L mm

280

MADE IN ITALY

Scalpelli piatti Flat cold chisels

Scalpelli piatti larghi Spade chisels

10°

Scalpelli a sgorbia Grooving chisels

552

€

cod.

cad/each

0321002280

18,289

400

0321002400

20,448

600

0321002600

28,577

cod.

cad/each

L mm

€

280

0321001027280

18,289

400

0321001027400

20,448

600

0321001027600

29,212

L mm

cod.

cad/each

400

0321003050400

49,533

300

0321003080300

60,964

115

350

0321003115350

66,044

300

0321003050300

53,343

280

0321005038280

72,395

280

0321006038280

190,512

L mm

cod.

cad/each

300

0321004026300

48,263

300

0321004032300

66,044

380

0321007035380

120,658

€

SCALPELLI DI QUALITÀ STANDARD PER MARTELLI DEMOLITORI SDS-MAX

Standard quality chisels for SDS-MA hammers Qualità Standard

03212

Standard quality

Scalpelli a punta Pointed chisels

SDS MAX

Scalpelli piatti Flat cold chisels

Scalpelli piatti larghi Spade chisels

L mm

280

€

cod.

cad/each

0321202280

11,054

400

0321202400

13,524

600

0321202600

19,169

cod.

cad/each

L mm

€

280

0321201025280

11,054

400

0321201025400

13,524

600

0321201025600

19,169

L mm

cod.

cad/each

400

0321203050400

23,520

300

0321203075300

29,400

€

Art. 03281121

€ 48,451 3 pcs

omposizione

Description

400 25x400 50x400

553

554

UTENSILI PER TAGLIO DEL LEGNO WOODWORKING TOOLS

555

PUNTE ELICOIDALI PER LEGNO A 4 TAGLIENTI CON ATTACCO HEX 1/4”

HEX 1/4” shank drill bits for wood with 4 cutting edges

05054

C.V.

Confezione Packaging

1/4" HEX FORM E

Alto rendimento - massima velocità

1/4 HE

Applicazioni

High performance - max speed

Ø mm

pcs.

cod.

cad/each

€

10 12 14 16 18 20 22 24 25 26 28 30 32

1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4

65 65 65 65 65 65 65 65 65 65 65 65 65

165 165 165 165 165 165 165 165 165 165 165 165 165

1 1 1 1 1 1 1 1 1 1 1 1 1

050541000 050541200 050541400 050541600 050541800 050542000 050542200 050542400 050542500 050542600 050542800 050543000 050543200

14,222 14,651 17,648 18,759 20,385 20,988 23,558 26,382 29,039 29,641 31,521 33,750 35,209

Applications

Per forare a grande rendimento il legno e i suoi derivati.

Legno Wood

For drilling wood and its derivatives with high efficiency. Art. 05055300

Multistrato Multilayer

€ 161,747

6 pcs Ø 16 - 18 - 20 22 - 25 - 32 mm

Truciolato Chipboard

PUNTE ELICOIDALI PER LEGNO A 2 TAGLIENTI, ALTA QUALITÀ HSS HSS wood working drills

05200

HSS

Confezione Packaging

HSS HRC 63

Applicazioni Applications

Legno duro Hard wood

Multistrato Multilayer Truciolato Chipboard GFRP

HSS - per legno duro

~DIN 7487

HSS - for hard wood

Ø mm

pcs.

cod.

cad/each

3 4 5 6 7 8 9 10 11 12 13 14 15 16

3 4 5 6 7 8 9 10 10 10 10 10 10 10

33 43 52 57 69 75 81 87 94 101 101 108 114 120

61 75 86 93 109 117 125 133 142 151 151 160 169 178

1 1 1 1 1 1 1 1 1 1 1 1 1 1

052000300 052000400 052000500 052000600 052000700 052000800 052000900 052001000 052001100 052001200 052001300 052001400 052001500 052001600

1,221 1,496 1,773 2,395 2,948 4,056 4,743 5,884 7,314 9,309 10,806 12,911 15,916 18,330

Per forare legno, derivati, evlar, fibre aramidiche senza sbavature. For drilling wood, derivatives, kevlar, aramidic fibers without smudging.

Art. 05010206

Art. 05010207

5 pcs Ø4-5-6 8 - 10 mm

8 pcs Ø3-4-5-6 7 - 8 - 9 - 10 mm

€ 17,825

Art. 05201 Self Disponibile su richiesta On demand

556

€

€ 27,461

PUNTE ELICOIDALI PER LEGNO CON PUNTA GUIDA A CENTRARE ED ELICHE AD ALTO SCARICO DEI TRUCIOLI. QUALITÀ SUPERPROFESSIONALE, SERIE LUNGA HSS wood working drills

05210

Alte prestazioni - L=245 mm

C.V.

High performances - L=245 mm

Confezione Packaging

C.V. HRC 55

Ø mm

pcs.

cod.

cad/each

€

6 8 10 12 14 16 18 20 22 24

6 8 10 10 10 10 10 10 13 13

160 160 160 160 160 160 160 160 160 160

245 245 245 245 245 245 245 245 245 245

1 1 1 1 1 1 1 1 1 1

052100600 052100800 052101000 052101200 052101400 052101600 052101800 052102000 052102200 052102400

22,552 23,750 25,433 26,831 29,346 32,437 37,160 42,412 47,833 54,892

Forano legno duro e dolce, stratificati, tutti i suoi derivati. Speciali per mensole a scomparsa e travi in legno. For soft and tough wood, plywood, non coated chipboards. Special for wood beams.

05212

Alte prestazioni - L=400 mm

C.V.

High performances - L=400 mm

Confezione Packaging

C.V. HRC 55

Ø mm

pcs.

cod.

cad/each

€

6 8 10 12 14 16 18 20 22 24

6 8 10 10 10 10 10 10 13 13

160 160 160 250 250 250 250 250 250 250

400 400 400 400 400 400 400 400 400 400

1 1 1 1 1 1 1 1 1 1

052120600 052120800 052121000 052121200 052121400 052121600 052121800 052122000 052122200 052122400

28,272 30,810 32,649 36,007 41,448 50,215 59,026 67,758 76,292 85,401

Forano legno duro e dolce, stratificati, tutti i suoi derivati. Speciali per mensole a scomparsa e travi in legno. For soft and tough wood, plywood, non coated chipboards. Special for wood beams.

Applicazioni Applications

Legno Wood

Multistrato Multilayer

Truciolato Chipboard

557

PUNTE ELICOIDALI PER LEGNO A 2 TAGLIENTI CON PUNTA GUIDA A CENTRARE Wood working drills, brad point

05001

C.V.

Serie corta

~ DIN 7487 Confezione Packaging

HRC 50

Short serie

Ø mm

Ø inch

pcs.

cod.

cad/each

3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 20 22 24 26 28 30

1/8 5/32 3/16 15/64 9/32 5/16 11/32 3/8 7/16 15/32 1/2 9/16 19/32 5/8 23/32 3/4 7/8 15/16 1.1/32 1.1/8 1.3/16

3 4 5 6 7 8 9 10 10 10 10 10 10 10 10 10 10 10 10 10 12

33 43 52 57 69 75 81 87 94 101 101 108 114 120 130 140 140 140 140 140 140

61 75 86 93 109 117 125 133 142 151 151 160 169 178 191 205 210 215 215 220 220

10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 1 1 1 1 1

050010300 050010400 050010500 050010600 050010700 050010800 050010900 050011000 050011100 050011200 050011300 050011400 050011500 050011600 050011800 050012000 050012200 050012400 050012600 050012800 050013000

0,842 0,965 1,004 1,239 1,425 1,499 1,686 1,956 2,873 2,948 4,001 4,435 5,264 5,588 9,438 11,445 13,462 15,818 18,379 22,345 26,246

Applicazioni Applications

€

Per forare legno e i suoi derivati.

Legno Wood

Multistrato Multilayer

For drilling wood.

Truciolato Chipboard

Art. 05002 Self Disponibile su richiesta On demand Art. 05010503

€ 643,060 137 pcs Ø 3÷16 mm

Art. 05010201

€ 7,765

05001

5 pcs Ø4-5-6 8 - 10 mm

Art. 05010202

€ 11,519

8 pcs Ø3-4-5-6 7 - 8 - 9 - 10 mm

370x380x570

558

pcs

3 4 5 6 7 8 9 10 12 14 16

10 10 10 10 10 10 10 10 5 5 3

05020 Ø

pcs

6x245 8x245 10x245 12x245 14x245

5 5 5 5 3

05025 Ø

pcs

6x400 8x400 10x400 12x400 14x400

5 5 5 3 3

PUNTE ELICOIDALI PER LEGNO A 2 TAGLIENTI CON PUNTA GUIDA A CENTRARE, SERIE LUNGA Wood working drills, long serie

05020

HRC 50

Confezione Packaging

C.V.

05025

L=245 mm €

C.V.

L=400 mm

Ø mm

pcs.

cod.

cad/each

Ø mm

pcs.

cod.

cad/each

6 7 8 9 10 11 12 13 14 15 16 18 20 22 24

6 7 8 9 10 10 10 10 10 10 10 10 10 13 13

160 160 160 160 160 160 160 160 160 160 160 160 160 160 160

245 245 245 245 245 245 245 245 245 245 245 245 245 245 245

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

050200600 050200700 050200800 050200900 050201000 050201100 050201200 050201300 050201400 050201500 050201600 050201800 050202000 050202200 050202400

6,752 6,752 6,752 7,497 7,497 9,738 9,738 11,434 11,434 13,272 13,272 16,872 21,004 26,272 29,244

6 8 10 12 13 14 15 16 18 20 22 24 26 28 30

6 8 10 10 10 10 10 10 10 10 13 13 13 13 13

230 230 230 230 230 230 230 230 230 230 230 230 230 230 230

400 400 400 400 400 400 400 400 400 400 400 400 400 400 400

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

050250600 050250800 050251000 050251200 050251300 050251400 050251500 050251600 050251800 050252000 050252200 050252400 050252600 050252800 050253000

9,335 11,956 12,373 13,872 17,315 17,315 20,443 20,443 27,368 33,000 43,510 55,700 62,400 65,764 82,598

Art. 05021 Self Disponibile su richiesta On demand

€

Art. 05026 Self Disponibile su richiesta On demand

Applicazioni Applications

Legno Wood

Multistrato Multilayer

Truciolato Chipboard

Forano legno dolce, stratificati, tutti i suoi derivati. Speciali per mensole a scomparsa e travi in legno. For soft wood, plywood, non coated chipboards. Special for wood beams.

PUNTE ELICOIDALI PER LEGNO A 2 TAGLIENTI CON ATTACCO HEX 1/4” Wood working drills, 1/4

05009 1/4" HEX FORM E

.C. shank

Attacco 1/4" HEX form E

C.V.

1/4" HEX form E shank

Confezione Packaging

Applicazioni

Ø mm

3 4 5 6 8 10

1/4 1/4 1/4 1/4 1/4 1/4

€

pcs.

cod.

cad/each

31 42 53 57 75 87

80 92 106 113 137 153

1 1 1 1 1 1

050090300 050090400 050090500 050090600 050090800 050091000

1,840 1,989 2,061 2,210 2,429 2,816

Applications

Legno Wood

Art. 05010700

€ 14,740 Multistrato Multilayer

Truciolato Chipboard

Per forare legno e i suoi derivati.

5 pcs Ø4-5-6 8 - 10 mm

For drilling wood.

559

PUNTE PER LEGNO PROFESSIONALI A SPIRALE SINGOLA TIPO LEWIS, GAMBO ESAGONALE Hexagonal shank auger bits, Lewis type, for professional use

Tipo Lewis - Per travi in legno

Lewis type - For wooden beams

05035 HRC 50

Confezione Packaging

Applicazioni Applications

Legno Wood

Truciolato Chipboard

Ø mm

6 8 10 12 14 16 18 20 22 24

6 8 10 10 10 10 13 13 13 13

l 90 90 90 90 90 90 90 90 90 90

C.V. L 155 155 155 155 155 155 155 155 155 155

05036 Ø mm

6 8 10 12 14 16 18 20 22 24

6 8 10 10 10 10 13 13 13 13

l 160 160 160 160 160 160 160 160 160 160

235 235 235 235 235 235 235 235 235 235

05040 Ø mm

6 8 9 10 11 12 13 14 15 16 18 20 22 24 25 26 28 30 32

6 8 9 10 10 10 10 10 10 10 13 13 13 13 13 13 13 13 13

l 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220

cod.

cad/each

1 1 1 1 1 1 1 1 1 1

050350600 050350800 050351000 050351200 050351400 050351600 050351800 050352000 050352200 050352400

7,771 8,279 9,714 11,147 12,373 13,404 15,345 17,680 18,814 20,039

300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300

L=235 mm €

pcs.

cod.

cad/each

1 1 1 1 1 1 1 1 1 1

050360600 050360800 050361000 050361200 050361400 050361600 050361800 050362000 050362200 050362400

8,800 9,504 11,147 13,533 15,359 16,545 18,996 21,694 22,009 25,124

C.V. L

€

pcs.

C.V. L

L=155 mm

L=300 mm €

pcs.

cod.

cad/each

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

050400600 050400800 050400900 050401000 050401100 050401200 050401300 050401400 050401500 050401600 050401800 050402000 050402200 050402400 050402500 050402600 050402800 050403000 050403200

11,754 11,754 12,758 13,563 14,975 16,103 15,756 17,278 18,839 18,839 21,157 23,361 26,445 28,984 31,982 32,315 36,749 41,408 51,217

Per forature di travi in legno. Foratura precisa e veloce grazie al centrino autoavvitante ed alla grande capacità di evacuazione dei trucioli. For drilling wood beams and plankings.

560

05042 Ø mm

6 8 10 12 13 14 16 18 20 22 24 25 26 28 30 32 35 40

6 8 10 10 10 10 10 13 13 13 13 13 13 13 13 13 13 13

l 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360

C.V. L 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460

05044 Ø mm

8 10 12 13 14 16 18 20 22 24 25 26 28 30 32

8 10 10 10 10 10 13 13 13 13 13 13 13 13 13

l 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400

pcs. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

C.V. L 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600

pcs. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

L=460 mm cod.

€ cad/each

050420600 19,948 050420800 20,469 050421000 20,946 050421200 25,967 050421300 27,729 050421400 27,795 050421600 29,624 050421800 33,191 050422000 37,847 050422200 41,005 050422400 42,668 050422500 46,613 050422600 48,498 050422800 55,058 050423000 64,246 050423200 77,312 050423500 102,402 050424000 136,314

L=600 mm cod.

€ cad/each

050440800 26,697 050441000 32,671 050441200 35,620 050441300 41,525 050441400 39,321 050441600 41,016 050441800 48,707 050442000 51,145 050442200 55,324 050442400 55,690 050442500 62,327 050442600 65,531 050442800 77,312 050443000 88,106 050443200 106,679

Art. 05240300

Art. 05240301

7 pcs

6 pcs

L = 300 mm

L = 460 mm

Ø 8 - 10 - 12 - 14 16 - 18 - 20

Ø 10 - 12 - 14 16 - 18 - 20

€ 211,219

€ 234,688

Cassetta in legno o in metallo Metal or wooden case

PUNTE PER LEGNO PROFESSIONALI A SPIRALE SINGOLA TIPO LE IS CON GAMBO SDS-PLUS SDS-PL S shank auger bits, Lewis type

05037

Confezione Packaging

Ø mm

8 10 12 14 16 18 20 22 24

160 160 160 160 160 160 160 160 160

L 235 235 235 235 235 235 235 235 235

SDS-PLUS - 235 mm €

05038

pcs.

cod.

Ø mm

cad/each

1 1 1 1 1 1 1 1 1

050370800 050371000 050371200 050371400 050371600 050371800 050372000 050372200 050372400

9,818 11,552 13,404 15,230 16,872 18,814 22,322 23,378 26,258

8 10 12 14 16 18 20 22 24

360 360 360 360 360 360 360 360 360

L 460 460 460 460 460 460 460 460 460

SDS-PLUS - 460 mm €

pcs.

cod.

cad/each

1 1 1 1 1 1 1 1 1

050380800 050381000 050381200 050381400 050381600 050381800 050382000 050382200 050382400

18,411 18,708 21,670 25,763 29,350 34,643 38,789 41,345 44,774

Art. 05240307

Art. 05240308

SDS-PLUS

7 pcs

6 pcs

L = 235 mm

L =460 mm

Ø 8 - 10 - 12 - 14 16 - 18 - 20 mm

Ø 10 - 12 - 14 16 - 18 - 20 mm

€ 219,042

€ 239,734

Cassetta in metallo Metal case

561

PUNTE ELICOIDALI PER LEGNO, SERIE LUNGA, SPECIALI PER CASSEFORMI Wood working drills for plankings

05030

Speciale per casseformi - L=400 mm

C.V.

90°

Special for plankings - L=400 mm

Confezione Packaging

90°

HRC 50

Ø mm

pcs.

cod.

cad/each

6 8 10 12 14 16 18 20 22 24 26 28 30

5 7 9 10 10 10 13 13 13 13 13 13 13

100 100 100 100 100 100 100 100 100 100 100 100 100

400 400 400 400 400 400 400 400 400 400 400 400 400

1 1 1 1 1 1 1 1 1 1 1 1 1

050300600 050300800 050301000 050301200 050301400 050301600 050301800 050302000 050302200 050302400 050302600 050302800 050303000

9,061 11,629 12,034 14,864 17,655 20,223 28,879 35,295 46,535 47,940 64,095 70,185 79,455

Applicazioni Applications

Legno Wood

Truciolato Chipboard

Ferro Iron

Art. 05031 Self Disponibile su richiesta On demand

562

Per forare legno e i suoi derivati, pannelli in gesso, pannelli isolanti. Speciali per casseformi, installazioni, carpenteria. For holes in beams, boards, soft metal sheets, special for journeyman’s.

€

05033

Speciale per casseformi - L=600 mm

C.V.

Special for plankings - L=600 mm

Confezione

90°

Packaging

90°

HRC 50

Ø mm

pcs.

cod.

cad/each

€

6 8 10 12 14 16 18 20 22 24 26 28 30

5 7 9 10 10 10 13 13 13 13 13 13 13

100 100 100 100 100 100 100 100 100 100 100 100 100

600 600 600 600 600 600 600 600 600 600 600 600 600

1 1 1 1 1 1 1 1 1 1 1 1 1

050330600 050330800 050331000 050331200 050331400 050331600 050331800 050332000 050332200 050332400 050332600 050332800 050333000

13,494 14,538 16,166 17,901 19,662 21,383 30,860 36,586 48,136 58,699 73,119 79,821 93,081

Applicazioni Applications

Legno Wood

Truciolato Chipboard

Ferro Iron

Art. 05034 Self Disponibile su richiesta On demand

563

MECCHIE PIATTE PER LEGNO, CODOLO ESAGONALE Hexagonal shank wood spade bits

05045

C.V.

Serie corta - L=150/160 mm

1/4 HE Confezione Packaging

HRC 48÷50

1/4" HEX FORM E

Applicazioni Applications

Legno Wood

Multistrato Multilayer

Short serie - L=150/160 mm

Ø mm

6 8 9 10 11 12 13 14 15 16 18 19 20 22 24 25 26 28 30 32 34 35 36 38 40

6,35 6,35 6,35 6,35 6,35 6,35 6,35 6,35 6,35 6,35 6,35 6,35 6,35 6,35 6,35 6,35 6,35 6,35 6,35 6,35 6,35 6,35 6,35 6,35 6,35

€

pcs.

cod.

cad/each

150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 160 160 160 160 160 160 160 160 160

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

050450600 050450800 050450900 050451000 050451100 050451200 050451300 050451400 050451500 050451600 050451800 050451900 050452000 050452200 050452400 050452500 050452600 050452800 050453000 050453200 050453400 050453500 050453600 050453800 050454000

3,078 3,078 3,104 3,104 3,143 3,143 3,324 3,324 3,429 3,429 3,677 3,807 3,807 4,328 4,667 4,876 5,254 5,477 5,803 6,088 6,962 7,223 7,223 7,366 7,627

Truciolato Chipboard Art. 05055100

€ 20,772 6 pcs

Ø 10 - 12 - 16 18 - 20 - 25 mm

Art. 05047 Self Disponibile su richiesta On demand

PROLUNGA PER MECCHIE L = 300 mm Spade bit extension

05046 Ø

564

L= 300 mm Confezione Packaging

Ø mm

6,35

€

pcs.

cod.

cad/each

300

05046

20,875

MECCHIE PIATTE PER LEGNO, CODOLO ESAGONALE Hexagonal shank wood spade bits

05048

C.V.

Serie lunga - L=400 mm

1/4 HE

Long serie - L=400 mm

Confezione Packaging

HRC 48÷50

1/4" HEX FORM E

Applicazioni Applications

Legno Wood

Ø mm

*6 8 10 12 14 16 18 20 22 24 25 26 28 30 32 34 35 36 38 40

4,50 6,35 6,35 6,35 6,35 6,35 6,35 6,35 6,35 6,35 6,35 6,35 6,35 6,35 6,35 6,35 6,35 6,35 6,35 6,35

€

pcs.

cod.

cad/each

400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

050480600 050480800 050481000 050481200 050481400 050481600 050481800 050482000 050482200 050482400 050482500 050482600 050482800 050483000 050483200 050483400 050483500 050483600 050483800 050484000

9,818 10,991 11,461 13,143 14,317 14,995 15,307 15,789 16,299 16,636 17,106 18,320 18,320 19,126 19,635 20,000 20,795 21,279 21,643 22,464

*Attacco esagonale *Hexagonal shank

Multistrato Multilayer

Foratura nel legno dolce e legno duro, nei suoi derivati e nel cartongesso. For drilling wood.

Truciolato Chipboard

MECCHIE PIATTE PER LEGNO, CODOLO ESAGONALE Hexagonal shank wood spade bits

05050

Diametro regolabile

C.V.

Adjustable diameter

Confezione Packaging

Ø mix -max mm

Ø 14,5 ÷ 45 Ø 22 ÷ 75

10 10

Ricambio Spare part

€

pcs.

cod.

cad/each

1 1

0505001 0505002

26,442 32,295

pcs.

cod.

cad/each

Ø 14,5 ÷ 45 (2pcs) Ø 22 ÷ 75 (2pcs)

1 1

0505011 0505012

6,336 7,131

€

Applicazioni Applications

Legno Wood

Multistrato Multilayer

Truciolato Chipboard

Art. 05051 Self Disponibile su richiesta On demand

565

FRESE TIPO FORSTNER A DUE TAGLIENTI CON PUNTA DA CENTRO ED INCISORI PER FORI NEL LEGNO Wood center bits, Forstner type

05065

Per legno duro - uso intensivo

~ DIN 7483

For hard wood - intensive use

Carbide Confezione Packaging

Metallo duro Carbide

Ø mm

pcs.

cod.

cad/each

€

15 20 25 26 30 35

8 8 8 8 8 10

90 90 90 90 90 90

1 1 1 1 1 1

050651500 050652000 050652500 050652600 050653000 050653500

35,608 38,190 40,718 43,286 45,802 48,359

Applicazioni Applications

Legno duro e derivati Hard wood

05067

C.V.

Confezione Packaging

HRC 55

Applicazioni Applications

Alto rendimento

~ DIN 7483

High performance

Ø mm

pcs.

cod.

cad/each

€

15 18 20 22 24 25 26 28 30 35 40 45 48 50

8 8 8 8 8 8 8 8 8 10 10 10 10 10

90 90 90 90 90 90 90 90 90 90 90 90 90 90

1 1 1 1 1 1 1 1 1 1 1 1 1 1

050671500 050671800 050672000 050672200 050672400 050672500 050672600 050672800 050673000 050673500 050674000 050674500 050674800 050675000

21,044 21,317 23,103 23,535 23,770 23,770 23,770 23,977 23,977 24,591 27,263 29,754 29,754 34,670

Legno dolce e derivati Mild wood Art. 05100605

€ 98,712 5 pcs

Ø 15 - 20 - 25 30 - 35 mm

566

FRESE TIPO FORSTNER A DUE TAGLIENTI CON PUNTA DA CENTRO ED INCISORI PER FORI NEL LEGNO Wood center bits, Forstner type

05063

C.V.

~ DIN 7483 Confezione Packaging

HRC 48÷50

Applicazioni Applications

Legno dolce e derivati Mild wood

Ø mm

pcs.

cod.

cad/each

€

10 12 14 15 16 17 18 20 22 24 25 26 28 30 32 34 35 36 38 40 45 50

8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10

90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 100 100 100

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

050631000 050631200 050631400 050631500 050631600 050631700 050631800 050632000 050632200 050632400 050632500 050632600 050632800 050633000 050633200 050633400 050633500 050633600 050633800 050634000 050634500 050635000

8,084 8,084 10,340 10,340 11,448 11,669 11,669 12,777 13,508 14,108 14,512 15,020 19,752 22,086 23,900 24,798 24,798 26,649 29,467 31,096 35,595 40,417

Art. 05100600

€ 84,619 5 pcs

Ø 15 - 20 - 25 30 - 35 mm

567

FRESE PER CERNIERE INVISIBILI Wood center bits

Per cerniere invisibili

For invisible hinges

05058

Confezione Packaging

Ø mm

26 30 35

8 8 10

L 55 55 60

05060

C.V. pcs.

cod.

Ø mm

cad/each

€

1 1 1

050582600 050583000 050583500

9,622 11,004 12,373

26 30 35

8 8 10

L 55 55 60

Carbide edges

€

pcs.

cod.

cad/each

1 1 1

050602600 050603000 050603500

36,729 39,598 40,497

FRESE PER TASSELLI

Tenon dowel plug cutters

05077

C.V. Confezione Packaging

Per tasselli

DIN 7489

Tenon dowel plug cutters Ø int mm 8 10 12 15 16 20 22 25 26 30 35 40

Ø ext mm 17,5 20,5 23,5 26,5 28 32 34 37 38 42 47 52

n. taglienti

pcs.

cod.

cad/each

4 4 4 4 4 4 5 5 5 5 6 6

11 11 13 13 13 13 13 13 13 13 16 16

140 140 140 140 140 140 140 140 140 140 160 160

1 1 1 1 1 1 1 1 1 1 1 1

050770800 050771000 050771200 050771500 050771600 050772000 050772200 050772500 050772600 050773000 050773500 050774000

40,374 44,807 49,339 56,088 58,305 67,260 71,792 78,541 80,759 89,900 100,685 112,675

d Ø int Ø ext L

568

€

cutting edges

TRIVELLINO PROFESSIONALE PER LEGNO Two flute gimlet

05076 Ø mm

2 3 4

110 115 135

pcs.

cod.

Ø mm

cad/each

€

1 1 1

050760200 050760300 050760400

3,456 3,572 4,094

5 6 7

140 160 170

€

pcs.

cod.

cad/each

1 1 1

050760500 050760600 050760700

5,568 8,111 8,111

SVASATORE 90° PER LEGNO Wood center bits

05440

C.V.

90°

90° Confezione Packaging

Z=5

Applicazioni Applications

Legno Wood

Ø mm

8 10 12 16 20

8 6 8 8 8

€

pcs.

cod.

cad/each

50 50 50 50 50

1 1 1 1 1

05440500800 05440501000 05440501200 05440501600 05440502000

5,503 6,011 6,232 6,859 7,589

Foratura nel legno dolce e legno duro, nei suoi derivati e nel cartongesso. For drilling wood.

Multistrato Multilayer Truciolato Chipboard

Art. 05442 Self Disponibile su richiesta On demand

FRESA A 90° PER LEGNO 90° milling cutters

05072 Confezione Packaging

Ø mm

3 4 5 6 7 8 10 12

16 16 16 16 16 20 20 20

L 25 25 25 25 25 25 25 25

05070

C.V. €

pcs.

cod.

cad/each

1 1 1 1 1 1 1 1

050720300 050720400 050720500 050720600 050720700 050720800 050721000 050721200

11,589 11,589 11,704 11,931 12,205 13,695 14,332 15,846

Confezione Packaging

Ø mm

3 4 5 6 7 8 9 10 11 12

16 16 16 16 16 20 20 20 20 20

C.V. €

pcs.

cod.

cad/each

1 1 1 1 1 1 1 1 1 1

050700300 050700400 050700500 050700600 050700700 050700800 050700900 050701000 050701100 050701200

11,202 11,202 11,202 11,202 11,202 11,202 11,202 11,202 11,202 11,202

25 25 25 25 25 25 25 25 25 25

L D

Ø Art. 05010205

€ 50,910 5 pcs

Ø 4 - 5 - 6 - 8 - 10 mm

569

SEGHE A TAZZA PER LEGNO CON LAME INTERCAMBIABILI IN ACCIAIO W.S. Tool steel hole - saw kit for wood

05080

C.V. Confezione Packaging

Composizione Size

H mm

pcs.

cod.

cad/each

€

7 pcs Ø 26 - 32 - 38 - 45 - 50 - 56 - 63 7 pcs Ø 26 - 32 - 38 - 45 - 50 - 56 - 63 5 pcs Ø 60 - 67 - 74 - 81 - 95

25 50 40

1 1 1

05080100 05080101 05080102

9,835 11,806 31,213

Foratura nel legno, nei suoi derivati e nel cartongesso. For drilling wood

Applicazioni Applications

Legno Wood

Truciolato Chipboard

Multistrato Multilayer

KIT PER LEGNO E CARTONGESSO Tool steel hole - saw kit for wood

Composizione Description Art. 05079600

€ 168,973 Ø 40÷200

pcs.

Sega regolabile a compasso con punta a centrare, due incisori e attacco hex per uso su trapani con mandrino a cremagliera

Adjustable compass saw with centering tip, two engravers and hex attachment to fit drill chuck with key Ø 4 - 5 - 6 - 8 - 10 mm Ø 4 - 5 - 6 - 8 - 10 mm Campana protettiva antipolvere trasparente Ø 280 mm Transparent dustproof protective bell Ø 280 mm Matita Pencil Flessometro Measuring tape

570

1 1 1

FRESE A PROFILO IN ACCIAIO DA UTENSILE PER TRAPANI E FRESATRICI Tool bits for power drills

05400

C.V. cod.

Ø mm

pcs.

€

Fresa a mortasare Straight bit

05400100

9,896

Sega circolare Slotting saw

05400170

11,461

Frese per incastri Tongue cutter

05400110

12,400

Fresa conica 45° 45° Chamfering bit

05400180

12,126

Fresa cilindrica per spianare e levigare Cylindrical cutter

05400120

12,400

Frese a raggio convesso Round cutter

05400190

12,126

Frese per profili tondi Rounding off cutter

05400130

12,400

Frese a raggio concavo Round cutter

05400200

12,126

Frese per scanalature Flute cutter

05400140

12,400

Frese a raggio convesso esterno Beading cutter

05400210

12,777

Frese per intagli Slotting cutter

05400150 05400160

35 S.2,5 35 S.1,5

7,301 7,301

Frese a raggio concavo Beading cut

05400220

12,777

cad/each

Profilatura nel legno dolce e duro su trapani montati su supporto o su fresatrici. Tool steel end mills for use in power drills with drill stand or with milling machines, for soft and medium hard wood.

FRESE E RASPE IN ACCIAIO DA UTENSILE PER TRAPANI E FRESATRICI Tool bits for power drills

05430

05432

applicazioni applications

cod.

Ø mm

pcs.

cad/each

€

Raspa cilindrica Cylindrical rasp

05430100

5,568

Raspa cilindrica a testa semisferica Cylindrical rasp

05430110

5,815

Raspa conica Conical rasp

05430120

6/15

5,737

Raspa cilindrica Cylindrical rasp

05432100

5,254

Raspa conica Conical rasp

05432110

6/15

5,346

Art. 05450201

€ 42,309 5 pcs

571

572

ACCESSORI ACCESSORIES

573

MANDRINI AUTOSERRANTI PER ELETTROUTENSILI Keyless drill chucks for portable power drills

Con ghiera di bloccaggio

28031

With ring lock system

Confezione Packaging

cod. 2803140

capacità sizes mm

attacco attachment

pcs.

cad/each

€

1÷13

1/2x20 UNF

100

92,512

Uso intensivo

28051

Intensive use

Confezione Packaging

cod. 2805140

capacità sizes mm

attacco attachment

pcs.

cad/each

€

1,5÷13

1/2x20 UNF

57,624

Camicia metallica Metal sleeve

metallo duro Carbide jaws

Uso intensivo

28007

Intensive use

Confezione Packaging

cod. 2800730

capacità sizes mm

attacco attachment

pcs.

cad/each

€

1,5÷-13

SDS PLUS

115

61,152

Camicia metallica Metal sleeve

metallo duro Carbide jaws

28009

DIN 6349

cod.

l L

2800930

capacità sizes mm

attacco attachment

chiave key

pcs.

cad/each

1÷13

SDS

115

39,482

Camicia metallica Metal sleeve A Table display included by purchasing 5 pcs

574

€

MANDRINI AUTOSERRANTI PER ELETTROUTENSILI Keyless drill chucks for portable power drills

28053 Confezione Packaging

cod. 2805330 2805340

Camicia metallica Metal sleeve

capacità sizes mm

attacco attachment

pcs.

cad/each

€

1,5÷13 1,5÷13

3/8x24 UNF 1/2x20 UNF

75 75

1 1

35,413 35,413

capacità sizes mm

attacco attachment

pcs.

cad/each

1,5÷13

1/2x20 UNF

41,236

capacità sizes mm

attacco attachment

pcs.

cad/each

1 ÷ 10 1 ÷ 10 1,5 ÷ 13 1,5 ÷ 13

3/8x24 UNF 1/2x20 UNF 3/8x24 UNF 1/2x20 UNF

64 64 75 75

1 1 1 1

23,608 23,608 25,573 25,573

capacità sizes mm

attacco attachment

pcs.

cad/each

0,5÷10 0,5÷10 2÷13 2÷13

3/8x24 UNF 1/2x20 UNF 3/8x24 UNF 1/2x20 UNF

61 61 72 72

1 1 1 1

15,228 15,228 18,274 18,274

28055 Confezione Packaging

cod. 2805540

€

Camicia metallica Metal sleeve

metallo duro Carbide jaws

28054 Confezione Packaging

cod. 2805410 2805420 2805430 2805440

Camicia plastica Plastic sleeve

€

28058 Confezione Packaging

Camicia plastica Plastic sleeve

cod. 2805810 2805820 2805830 2805840

€

575

MANDRINI A CREMAGLIERA PER ELETTROUTENSILI PORTATILI E PER MACCHINE UTENSILI, COMPLETI DI CHIAVE, DIN 6349 Keyless chucks for portable power tools, key chuck included

Uso intensivo

28004

Intensive use

Confezione Packaging

cod. 2800440

capacità sizes mm

attacco attachment

chiave key

pcs.

cad/each

€

2-13

1/2x20 UNF

39,984

Uso intensivo

28007

Intensive use

Confezione Packaging

capacità sizes mm

attacco attachment

chiave key

pcs.

cad/each

2-13

SDS-PLUS

107

43,512

cod.

capacità sizes mm

attacco attachment

chiave key

pcs.

cad/each

2800910

1,5 -13

SDS

107

16,885

cod. 2800710

€

l L

28009 Confezione Packaging

€

l L

A Table display included by purchasing 5 pcs

Confezione Packaging

1/4

cod.

capacità sizes mm

attacco attachment

chiave key

pcs.

cad/each

2800920

1,5 -13

1/4" HEX FORM E

16,292

l L A Table display included by purchasing 5 pcs

576

€

MANDRINI A CREMAGLIERA PER ELETTROUTENSILI PORTATILI E PER MACCHINE UTENSILI, COMPLETI DI CHIAVE, DIN 6349 Keyless chucks for portable power tools, key chuck included

28001

cod.

capacità sizes mm

attacco attachment

chiave key

pcs.

cad/each

€

2800110 2800120 2800130 2800140 2800160 2800150

1÷10 R. 1÷10 R. 1,5÷13 R. 1,5÷13 R. 3÷16 R. 3÷16 R.

3/8x24 UNF 1/2x20 UNF 3/8x24 UNF 1/2x20 UNF 1/2x20 UNF 5/8x16 UNF

62 62 78 78 87 87

S1 S1 S2 S2 S3 S3

1 1 1 1 1 1

13,773 13,773 15,279 14,230 20,152 31,944

A Table display included by purchasing 5 pcs

28002

cod.

capacità sizes mm

attacco attachment

chiave key

pcs.

cad/each

€

2800210 2800220 2800230 2800250

1-10 1-10 1.5-13 3-16

3/8x24 UNF 1/2x20 UNF 3/8x24 UNF 5/8x16 UNF

74 74 89 99

S1 S1 S2 S3

1 1 1 1

17,055 17,055 18,916 30,804

cod.

capacità sizes mm

attacco attachment

chiave key

pcs.

cad/each

2800310 2800320 2800325 2800330

1-10 1,5-13 3-16 3-16

B 12 B 16 B 16 B 18

62 78 87 87

S1 S2 S3 S3

1 1 1 1

16,399 18,189 29,620 29,620

Confezione Packaging

28003

€

Confezione Packaging

577

MANDRINI AUTO-SERRANTI DI PRECISIONE PER TRAPANI A COLONNA E MACCHINE UTENSILI Industrial quality keyless drill chucks

Uso intensivo - massima precisione

28035

Intensive use - max precision

Confezione Packaging

cod.

2803540

capacità sizes mm

attacco attachment

pcs.

cad/each

1-16

B16

186,984

Massima precisione

28034

Max precision

Confezione Packaging

578

€

cod. 2803410 2803430 2803440 2803450 2803460

capacità sizes mm

attacco attachment

pcs.

cad/each

€

1÷10 1÷13 1÷16 1÷16 5÷20

B 12 B 16 B 16 B 18 B 22

70 90 103 105 124

1 1 1 1 1

90,255 97,026 110,564 110,564 110,564

MANDRINI AUTO-SERRANTI DI PRECISIONE PER TRAPANI A COLONNA E MACCHINE UTENSILI Industrial quality keyless drill chucks

28032 Confezione Packaging

cod. 2803210 2803220 2803229 2803230 2803231 2803240 2803250

capacità sizes mm

attacco attachment

pcs.

cad/each

€

1÷10 1÷10 1÷13 1÷13 1÷13 1÷16 1÷16

B 12 B 16 B 12 B 16 B 18 B 16 B 18

86 86 102 102 108 108 108

1 1 1 1 1 1 1

59,578 59,578 64,163 64,163 64,163 72,912 72,912

capacità sizes mm

attacco attachment

pcs.

cad/each

1÷10 1÷10 1÷13 1÷13 1÷16 1÷16

3/8x24 UNF 1/2x20 UNF 3/8x24 UNF 1/2x20 UNF 1/2x20 UNF 5/8X16 UNF

86 86 102 102 102 102

1 1 1 1 1 1

58,661 58,661 65,432 65,432 77,280 77,280

28030 Confezione Packaging

cod. 2803010 2803020 2803030 2803040 2803050 2803060

€

579

RACCORDI DI ADATTAMENTO PER MANDRINI Mandrel adapter SDS PLUS-1/2 UNF

28186 attacco attachment

€

cod.

pcs.

cad/each

SDS - PLUS

1/2 x 20 UNF

28186100

12,686

1/4 Q.C.

1/2 x 20 UNF

28186201

9,733

28186101

0,953

1/4 Q.C.

3/8 x 24 UNF

28186200

9,022

1/2 x 20 UNF

3/8 x 24 UNF

28186204

7,902

1/2 x 20 UNF

3/8 x 24 UNF

28186203

7,902

3/8 x 24 UNF

28186205

4,304

Confezione Packaging

ADATTATORE A CAMBIO RAPIDO SDS-MAX / SDS-PLUS SDS-MAX / SDS-PLUS adapter

03184

SDS-MAX

SDS-PLUS

€

cod.

cad/each

03184101

220

88,211

CHIAVI PER MANDRINI A CREMAGLIERA Chucks keys

28010 Confezione Packaging

cod. 2801009 2801010 2801020

580

tipo / sizes DIN

pcs.

cad/each

€

S1 S2 S3

1 1 1

2,959 4,094 5,359

ATTACCHI CONICI MORSE PER MANDRINI, TEMPRATI E RETTIFICATI Taper drill chuck arbors

28160 Cono esterno External Morse DIN 228

Confezione Packaging

Cono DIN 238 per mandrino Morse DIN 228 for chuck

cono morse morse taper

DIN 228

attacco conico mandrino drill chuck taper DIN 238

cod.

1 1 1 1 2 2 2 2 2 3 3 3 3 3 4 4 4 4 5 5 5 5

B10 B12 B16 B18 B10 B12 B16 B18 B22 B12 B16 B18 B22 B24 B16 B18 B22 B24 B16 B18 B22 B24

86 89 99 99 105 105 112 119 130 127 134 140 147 157 157 164 176 186 198 198 207 217

281600110 281600112 281600116 281600118 281600210 281600212 281600216 281600218 281600222 281600312 281600316 281600318 281600322 281600324 281600416 281600418 281600422 281600424 281600516 281600518 281600522 281600524

cono morse morse taper

attacco conico mandrino drill chuck taper

cod.

3/8x24 UNF 1/2x20 UNF 5/8x16 UNF 3/8x24 UNF 1/2x20 UNF 5/8x16 UNF

95 110 135 115 125 150

€ cad/each

12,961 12,961 12,961 12,961 16,220 16,220 16,220 16,220 16,220 22,922 22,922 22,922 22,922 22,922 35,842 35,842 35,842 35,842 53,588 53,588 53,588 53,588

28165 Cono esterno External Morse DIN 228

Confezione Packaging

DIN 228 2 2 2 3 3 3

€ cad/each

28165023/8 28165021/2 28165025/8 28165033/8 28165031/2 28165035/8

21,577 21,577 26,794 29,609 29,609 29,609

Per mandrino For chuck

581

BUSSOLE DI RIDUZIONE PER CONI MORSE, TEMPRATE E RETTIFICATE INTERNAMENTE ED ESTERNAMENTE Hardened and ground morse taper sleeve

28150

DIN 2185

Cono esterno External Morse DIN 228

Confezione Packaging

cono morse morse taper DIN 228 esterno interno external internal 1 2 3 3 4 4 4 5 5 5 5 6 6

Cono interno Internal Morse DIN 228

0 1 1 2 1 2 3 1 2 3 4 4 5

cod.

€ cad/each

80 92 99 112 124 124 140 156 156 156 171 219 219

281500100 281500201 281500301 281500302 281500401 281500402 281500403 281500501 281500502 281500503 281500504 281500604 281500605

18,044 16,220 19,740 19,740 26,584 26,584 26,584 58,946 58,946 58,946 58,946 104,358 104,358

PROLUNGHE PER UTENSILI CONO MORSE, TEMPRATE E RETTIFICATE INTERNAMENTE ED ESTERNAMENTE

Morse taper sleeve extension, hardened and ground internally and externally

28154 Cono esterno External Morse DIN 228

Cono interno Internal Morse DIN 228

582

DIN 2187 Confezione Packaging

cono morse morse taper DIN 228 esterno interno external internal 1 1 2 2 2 3 3 3 3 4 4 4 4 4 5 5 5 5 5 6 6 6 6 6

1 2 1 2 3 1 2 3 4 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5

cod.

€ cad/each

145 160 160 175 196 175 194 215 240 200 215 240 265 300 232 247 268 300 335 294 309 330 355 390

281540101 281540102 281540201 281540202 281540203 281540301 281540302 281540303 281540304 281540401 281540402 281540403 281540404 281540405 281540501 281540502 281540503 281540504 281540505 281540601 281540602 281540603 281540604 281540605

48,842 51,840 39,258 50,771 65,361 53,300 53,300 72,480 111,685 111,685 84,619 84,619 111,685 157,945 164,998 149,484 145,258 117,748 183,331 261,402 342,372 342,372 342,372 350,911

ESTRATTORI PER UTENSILI CON CONO MORSE DIN 228 IN ACCIAIO TRATTATO Ejector drifts

28158

DIN 317 Confezione Packaging

28158

DIN 318

Packaging

Cutting paste

cod.

1-2 3 4 5-6

140 190 225 265

281580102 281580300 281580400 281580506

cono morse morse taper

cod.

1-2-3 4-5-6

320 380

€ cad/each

8,540 13,260 19,974 27,497

SEMIAUTOMATICO

Confezione

Pasta lu rificante per il taglio

cono morse morse taper

28158A0103 28158A0406

Olio da taglio minerale intero 0,5 lt Cutting oil 0,5 lt

€ cad/each

85,596 104,358

Olio da taglio emulsionabile in tanica 5 Kg (5lt) Cutting oil tank 5 lt

Art. 4100401

€ 12,973

Art. 28020004

€ 37,614

Art. 28020005 € 120,995

583

584

SISTEMI ESPOSITIVI DISPLAY SYSTEMS

585

SISTEMA A MODULI PER L’ALLESTIMENTO DI PARETI ATTREZZATE A LIBERO SERVIZIO

Modular system for free standing wall display system.

Componi la tua parete in 5 mosse: Compose your display wall in 5 moves:

MODULO 1

MODULO 2

la categoria merceologica di tuo interesse. 1 Individua

Identify the product category of your interest.

MODULO 3

MODULO 5

MODULO 4

MODULO 6

Individua la famiglia prodotto di tuo interesse.

Identify the product family of your interest.

la profondità di assortimento desiderata. 3 Scegli tra soluzioni a 1 o più moduli.

Choose the desired assortment depth from 1- or multi-module solutions.

MODULO 7

MODULO 8

4 Individua codice e prezzo del modulo pre assortito.

Identify pre-sorted module code and price.

MODULO 9

MODULO 11

MODULO 10

MODULO 12

Infine, componi il mi di assortimento

che risponde alle tue esigenze. razie al sistema espositivo multilivello, per ogni metro lineare è possibile comporre la tua esposizione in modo flessibile, sfruttando un massimo di 12 moduli espositivi. Finally, compose the assortment mix that meets your needs. With the multilivell display system, for each linear meter you can flexibly compose your display, taking advantage of up to 12 display modules.

ivolgiti all’agente di zona per consultare il dettaglio di ciascun assortimento e per ulteriori informazioni. Contact your local agent to see the details of each assortment and for more information.

586

1 CATEGORIA MERCEOLOGICA PRODUCT CATEGORY

2 FAMIGLIA PRODOTTO CATEGORY ITEM NUMBER

DESCRIZIONE ARTICOLO ITEM DESCRIPTION

01120

PUNTA HSS-CO 8% DIN 338 SERIE CORTA HSS-CO 8% twist drill DIN 338 short serie

01145

PUNTA HSS-CO 5% DIN 338 SERIE CORTA HSS-CO 5% twist drill DIN 338 short serie

CODICE MODULO MODULS ITEM NUMBER

LI IN PRICE LIST €

01135550

01135551

705,180 €

01155550

1.162,250 €

01155551

1.089,230 €

01155552

465,200 €

01229550

1.177,620 €

01229551

665,160 €

01229552

543,370 €

01068550

1.636,970 €

01068551

1.633,150 €

01068552

1.168,390 €

01068553

462,570 €

01075550

1.598,340 €

01075551

1.571,670 €

01075552

1.126,460 €

ASSORTIMENTO PUNTE HSS-G DIN 338 FINITURA BRILLANTE SS- twist drills D N 33 bright finish assortments

01075553

445,850 €

01068554

348,440 €

01360551

944,430 €

01360552

555,840 €

01360550

945,510 €

01016550

736,370 €

01016551

466,300 €

01016552

235,250 €

01016553

430,180 €

21010550

574,600 €

21010551

1.257,310 €

21080550

1.179,890 €

21080551

766,730 €

21013550

826,650 €

17005550

241,690 €

17005551

216,490 €

10240550

470,560 €

PUNTE HSS-G DIN 338 SPEEDMASTER HSS-G twist drill DIN 338 Speedmaster

PUNTA HSS-G DIN 338 FINITURA NERA SS- twist drill D N 33 black finish

01060

ASSORTIMENTI PUNTE HSS-G DIN 338 FINITURA NERA SS- twist drills D N 33 black finish assortments

PUNTA HSS-G DIN 338 FINITURA BRILLANTE SS- twist drill D N 33 bright finish

01070

01079

01350

01001

METALLO - FRESE METAL - HOLE SAW

METALLO - SEGHE BIMETALLICHE METAL - BIMETAL HOLE SAW

SS FI I B ILL CCO 1 SS- twist drill D N 33 bright finish 1/4 EX shank

P SS DI 8 B SIC SS- twist drill D N 33 AS C

PUNTA HSS DIN 338 - ESECUZIONE RULLATA HSS twist drill DIN 338 - rolled

21001

FRESA A TAZZA HSS HSS hole saw

21060

SEGA A TAZZA BIMETALLICA HSS SS bimetal hole saw

21090

SEGA A TAZZA BIMETALLICA HSS-CO SS-C bimetal hole saws

O L C.V. S I P . I M SC IO S SIBIL 10001 + 15001 M SC IC. M. hand taps 3 pcs sirie + ad ustable tap wrench

12001 + 15030 METALLO - MASCHIATURA METAL - TAPPING

N. MODULI N° OF MODULS

01220

METALLO - PUNTE METAL - DRILL BITS

FILI L C.V. M IC M I FILI I POLLICI C. . round dies metric coarse thred + round die stock

M CC I SS DI 1 B I M SC IO OOD L SC 10162 + 15005 M SC I SSD N 371/ machine taps + oodle tap holder

10100 + 15001

M SC I M O S I P I M SC IO S SIBIL and taps 3 pcs serie + ad ustable tap wrench

17020550

513,810 €

12066 + 15035

FILI SS S O SP CI L I FILI DI 22 SS- special outside diameter round dies + round die stock D N 225

12100550

329,410 €

587

1 CATEGORIA MERCEOLOGICA PRODUCT CATEGORY

FAMIGLIA PRODOTTO CATEGORY ITEM NUMBER

DESCRIZIONE ARTICOLO ITEM DESCRIPTION

03110

P P M I LI DILI D ISSIMI S P I Drill bit for extreme hard construction materials S PER RAN T

N. MODULI N° OF MODULS

CODICE MODULO MODULS ITEM NUMBER

LI IN PRICE LIST €

03116550

835,580 €

03116551

980,100 €

03105550

423,820 €

03073550

718,130 €

03073551

417,240 €

03070550

1.179,310 €

03070551

788,120 €

03070552

413,880 €

03050550

944,180 €

03050551

750,160 €

03050552

327,910 €

03078550

693,530 €

03078551

539,550 €

03078552

971,570 €

03085550

328,760 €

03174550

5.435,870 €

03174551

3.362,210 €

03174552

2.641,470 €

03174553

1.759,210 €

03166550

2.091,350 €

03166551

1.531,380 €

03166552

1.015,190 €

03163550

3.178,450 €

03163551

2.150,720 €

03163552

1.483,730 €

03165550

1.665,040 €

03165551

973,550 €

03165552

692,480 €

03176550

929,870 €

03176551

1.602,890 €

03176552

996,140 €

03120550

528,800 €

03120551

853,390 €

S DI M M Diamond drill bits M14

21103550

925,590 €

P P I O M P P V O Drill bits for granite EXTREME ARD C T + glass dril bits

03146550

442,120 €

S DI M K M S P P V Diamond drill bits ERAMASTER + glass drill bits

03146551

558,180 €

03146552

708,090 €

03100

P I O M DC Drill bits for granite EXTREME ARD C T P

03072

03060

P C LC S O M Drill bits for concrete MAX4

P C LC S O S P IO , S I CO Drill bits for cncrete S PER R , short serie

MURO - PUNTE WALL - DRILL BITS

PUNTE PER MURO SERIE CORTA Drill bits for masonry, short serie

03001

03076

P M L I SO M L IK Multipurpose drill bits M LT

03089

P FO O CCO 1 Multipurpose drill bit F RAT TT with EX 1/4 shank

P SDS PL S MM LI I SDS-PL S hammer drill bits AMMER 4 cutting edges

03169

P SDS K8 SDS-PL S hammer drill bits

03156

MURO - PUNTE SDS WALL - SDS HAMMER DRILL BITS

P SDS PL S S D D 2 LI I SDS-PL S hammer drill bits STANDARD 2 cutting edges

03155

PUNTE SDS-MAX SDS-MAX hammer drill bits

03170

03117

03100 + 03140

03117 + 03140

03122 + 03140

588

S DI M K M S Diamond drill bits ERAMASTER F

21104 MURO - FRESE DIAMANTATE P V O WALL - DIAMOND DRILL BITS AND GLASS DRILL BITS

LI I 4 cutting edges

P SDS PL S K 2 LI I SDS-PL S hammer drill bits 4 2 cutting edges

03160

F S DI M K M S PL S P P V O Diamond drill bits ERAMASTER PL S + glass drill bits

CATEGORIA MERCEOLOGICA PRODUCT CATEGORY

FAMIGLIA PRODOTTO CATEGORY ITEM NUMBER

DESCRIZIONE ARTICOLO ITEM DESCRIPTION

MURO - FRESE IMPACT WALL - IMPACT CORE BITS

21111

F S P FO ICI IMP C CCO M22 Masonry impact core bits MPACT with M22 connection

03220 + 03222

SCALPELLI SDS-PLUS ALTA QUALITÀ SCALPELLI SDS-PLUS STANDARD igh quality SDS-PL S chisels + standard quality SDS-PL S chisels

03210

MURO - SCAPELLI WALL - CHISELS

CODICE MODULO MODULS ITEM NUMBER

LI IN PRICE LIST €

21116550

1.298,880 €

21116551

1.228,430 €

03281550

531,710 €

SCALPELLI ATTACCO SDS-MAX igh quality SDS-MAX chisels

03281551

723,310 €

03222 + 03212

SCALPELLO SDS-PLUS STANDARD SC LP LLO SDS M S D D Standard quality SDS-PL S chisels + standard quality SDS-MAX chisels

03281552

477,640 €

03220 + 03210

SC LP LLO SDS PL S SC LP LLO SDS M igh quality SDS-PL S chisels + high quality SDS-MAX chisels

03281553

735,640 €

05040 + 05042

PUNTE PER LEGNO SPIRALE SINGOLA TIPO LEWIS L L mm Lewis type single helix bits L 300 + L 460 mm

05240550

517,480 €

P L O P C SS FO MI L L mm Wood working drills for plankings L 400 + L 600 mm

05240551

422,110 €

05054

P P L O LI I CO CCO 1 FO M ex 1/4 form E bits for wood working with 4 cutting edges

05055552

504,040 €

05200

PUNTA PER LEGNO IN HSS SS wood working bits

05202550

731,010 €

05202551

485,160 €

05001

P P L O L C.V. C. . wood working drill bits

05010550

332,480 €

P L O L C.V. P P L OL 2 C. . wood working drill bits + C. . wood working drill bits L 245 mm

05010551

669,110 €

05001 + 05020

05001+ 05020 +05026

O L C.V. P P L O S.L. L 2 L C. . wood working drill bits + C. . wood working drill bits L 245 L 400 mm

05010552

608,910 €

05025

P P L O S.L. L mm C. . wood working drill bit L 400 mm

05010553

514,230 €

05045

MECCHIA PIATTA TRE PUNTE SERIE CORTA Wood spade bits short serie

05055550

472,760 €

05055551

693,370 €

05063

FRESA TIPO FORSTNER Wood center bits, Forstner type

05100550

451,090 €

05100551

437,550 €

05100552

520,230 €

05079550

1.076,170 €

05079551

499,840 €

23825550

1.415,260 €

S IPO FO S F S P C I I VISIBIL S 05063 + 05058 FWood center bits, Forstner type + wood center bits, invisible type LEGNO - FRESE WOOD - CENTER BITS

N. MODULI N° OF MODULS

05030 + 05033

LEGNO - PUNTE E MECCHIE WOOD - DRILL BITS AND WOOD SPADES

05067

FRESA FORSTNER ALTO RENDIMENTO Wood center bits , high performance

05078

FRESE A TAZZA PER LEGNO DENTI IN METALLO DURO Carbide tipped hole saws for wood L M P

S I L IVI CCO BOSC P M LLO, L O PL S IC LAME PER GATTUCCIO ATTACCO SABRE ig saw blades osch type for metal, wood and plastics + reprocating blades SA RE type L M P

S I L JIG SAW BLADES

IVI

LAME PER UTENSILI OSCILLANTI M LT F CT N SC LLAT N TOOLS BLADES

23600 …

L M P

S I L IVI CCO BOSC P M LLO, L O PL S IC ig saw blades osch type for metal, wood and plastics

23825551

487,610 €

ASSORTIMENTI LAME ATTACCO BOSCH P M LLO, L O PL S IC LAME PER GATTUCCIO ATTACCO SABRE ig saw blades osch type for metal, wood and plastics + reprocating blades SA RE type

23825552

704,420 €

23430550

946,670 €

L M P

23510 …

SILI OSCILL I CCO ICK C S LOCK P M LLO, L O, PL S IC Multi fuction oscillating tools blades C C AN E and STARL C type for metal, wood and plastics

589

VETRINE PER L'ESPOSIZIONE DI UTENSILI DA TAGLIO Cutting tools display

Composizione

Description Art. 01195861

21011

Art. 01195871

21001 Ø12÷50 + 55 60 (1x)

Ø 12÷50 + 55 - 60 (2x)

21300

21001

Art. 01195869

Ø12÷50 + 55 60 (1x)

41 pcs HSS+TiN

82 pcs HSS - G HSS+TiN

Ø12÷50 + 55 60 (1x)

41 pcs HSS - G

Ø 12÷50 + 55 - 60 (2x)

21001

Art. 01195876 82 pcs HSS - Co

Art. 01195862

Ø 12÷50 + 55 - 60 (2x)

82 pcs HSS - G

Description

21300

Composizione Description Art. 01195860

01180

pcs 01183

01185

Gr. 1 - 2 - 3 - 4 - 5 -7-8 1 pcs. Gr. 2 - 3 - 4 - 5 - 6 - 9 - 24 1 pcs. Ø 4.3 - 5.3 - 6.3 - 7.3 - 8.3 9.4 - 10.4 - 12.4 - 15 16.5 - 20.5 - 25 - 28 - 31

Gr. 1 - 2 - 3 - 4 01200

01230

1 pcs Gr. 2 - 3 - 4 - 5 - 6 - 9 - 24 1 pcs. Gr 1 - 2 - 3 - 4

01188

1 pcs.

1 pcs. 5 pcs

5 pcs.

011750600

0117601

60x44x190 cm

Composizione Description Art. 01195859

La vetrina è in omaggio per ordini di 6 ripiani di utensili a scelta The display is free of charge in case of an order with 6 shelves with tools at your choice

590

Gr. 1 - 2 - 3 - 4

5 pcs.

2 pcs.

01180

Gr. 5 - 7 - 8

01183

Gr. 2 - 3 - 4 5 - 6 - 9 - 24 2 pcs.

01188

01185

Ø 4.3 - 5.3 - 6.3 - 7.3 - 8.3 9.4 - 10.4 - 12.4 - 15 16.5 - 20.5 - 25 - 28 - 31 1 pcs.

011750600

pcs

1 pcs.

0117601 Gr. 1 - 2 - 3 - 4 1 pcs. 5 pcs.

VETRINE PER L'ESPOSIZIONE DI UTENSILI DA TAGLIO Cutting tools display

Composizione

Description Art. 01195865

pcs

21060

Description

Ø 16 - 17 - 19 - 20 - 21 - 22 - 24 - 25 27 - 29 - 30 - 32 - 33 - 35 - 37 - 38 40 - 41 - 44 - 46 - 48 - 51 - 54 (2x) Ø 57 - 60 - 64 - 70 - 76 - 79 - 83 89 - 92 - 102 (1x)

Art. 01195879

210705519 8 pcs.

21090

pcs

Ø 16 - 17 - 19 - 20 - 21 - 22 - 24 - 25 27 - 29 - 30 - 32 - 33 - 35 - 37 - 38 40 - 41 - 44 - 46 - 48 - 51 - 54 (2x) Ø 57 - 60 - 64 - 70 - 76 - 79 - 83 89 - 92 - 102 (1x)

210705546 8 pcs.

210705519B 8 pcs.

210705546B 8 pcs.

Composizione Description Art. 01195880

21200 Weldon

28 pcs HSS

Ø12÷35x1 +38 - 40 - 45 - 50

Composizione Description

Ø15÷40x1+42 - 45 - 48 50 - 55 - 60

Art. 01195864

Composizione Description

21040

21015

Art. 01195866

pcs

Ø 16 - 22 - 25 - 27 - 30 - 35 - 38 - 40 45 - 50 - 55 - 60 - 65 - 70 - 80 (2x) Ø 85 - 100 (1x)

pcs

Composizione

Description Art. 26008501

pcs

26001 - 26003

Description Art. 26030502

Ø6 - 8 - 10 12 - 15 (5x)

26020

pcs Art. 26030504

pcs

26034

Composizione

Description

24 pcs

21110 21111

HEX 12 4 pcs.

Ø 6 - 8 - 10 12 - 16 (9x)

iALN

Composizione Art. 21116112

Ø 6 - 8 - 10 12 - 16 (9x)

Description

Ø 30 - 35 - 40 50 - 65 - 80 90 - 100

Art. 21116117

21122

Ø 40 - 50 - 60 66 - 80 - 90 100

pcs

SDS 4 pcs.

8 pcs

21130316 10 pcs.

21130110 6 pcs.

21130300 3 pcs.

21130305 3 pcs.

591

VETRINE PER L'ESPOSIZIONE DI UTENSILI DA TAGLIO Cutting tools display

44x31x52 cm

La vetrina è in omaggio per ordini di 2 ripiani di utensili a scelta The display is free of charge in case of an order with 2 shelves with tools at your choice

Composizione

Description Art. 01195761

pcs

HSS-G Ø15÷37x2 + 38÷50x1 21001

Description Art. 01195760

pcs

Gr. 1 - 2 - 3 - 4

Gr. 1 - 2 - 3 - 4 - 5 - 7 - 8 01180

1 pcs.

01200

1 pcs. Gr. 2 - 4 - 6 - 9 - 24

Gr. 2 - 4 - 6 - 9 - 24 01183

1 pcs.

01230

01185

Ø 5.3 - 6.3 - 8.3 - 10.4 12.4 - 15 - 16.5 - 20.5 25 - 28

01188

1 pcs. Gr 1 - 2 - 3 - 4 1 pcs.

1 pcs. 5 pcs 0117601

592

5 pcs 011750600

VETRINE PER L'ESPOSIZIONE DI UTENSILI DA TAGLIO Cutting tools display

Composizione

Description Art. 01195786

pcs HSS+TiN

Description Art. 01195764

Ø15÷50+55-60x1

21300

pcs HSS-G+TiALN

Composizione

Description Art. 01195762

Description Art. 01195778

Ø15÷50x1+55-60

21200 Weldon

pcs HSS

Composizione

Description Art. 01195773 pcs

Description

21060 /

Ø 32 - 35 - 37 - 38 - 40 - 41 - 44 48 - 51 - 54 - 57 - 60 - 64 - 70 - 76 (1x)

21090

pcs

6 pcs. 210705519

Ø 16 - 19 - 20 - 21 - 22 - 24 - 25 27 - 29 - 30 (2x)

Art. 01195780

Ø 16 - 19 - 20 - 21 - 22 - 24 - 25 - 27 - 29 - 30 (2x)

Ø12÷30x1 + 32-35-38-40

21040

pcs T.C.T.

Ø15÷50x1 + 55-60 21325

Ø 32 - 35 - 37 - 38 - 40 - 41 - 44 48 - 51 - 54 - 57 - 60 - 64 - 70 - 76 (1x) 6 pcs

6 pcs. 210705519B

210705546

6 pcs 210705546B

Composizione Description

Ø 25 - 30 - 35 - 40 (2x)

Art. 01195774

pcs

21110 21111

21115501 2 pcs.

50 - 65 (2x) 80 - 90 - 100 (1x)

21115521 2 pcs.

21115504 2 pcs.

21115524 2 pcs.

21115506 8 pcs.

593

594

TABELLE TECNICHE TECHNICAL TABLES

595

SCELTA DELLA PUNTA PER METALLO E DEI PARAMETRI DI TAGLIO DA USARE IN FUNZIONE DEL MATERIALE DA LAVORARE

Chart for metal drills selection and relative cutting speeds in accordance with the materials to work

TAGLIO METALLI METAL CUTTING

1 Materiale da lavorare Work-piece material

Qualità punta Drill quality

Velocità periferica Peripherical speed

Diametro punta / Drill size - mm

Refrigerante Cooland

Avanzamento / Feed (mm/giro) Acciaio non legato da costruzione / Common steel R<600N/mm2

HSS HSS-CO

20÷25 25÷30

0.05

0.12

0.20

0.25

0.30

0.40

Acciaio da costruzione basso legato / Low alloy steel R<700÷900N/mm2

HSS HSS-CO

10÷12 15÷18

0.03

0.07

0.10

0.16

0.20

0.25

Acciaio legato al Ni Cr / Ni Cr Steel R<1100÷1300N/mm2

HSS HSS-CO

6÷8 8÷10

0.02

0.05

0.08

0.12

0.14

0.18

Acciaio inox martensitico e austenitico / Stainless steel Acciaio refrattario Acciaio resistente alla corrosione Heat resistant steel, corrosion resistant steel

HSS-CO 5% HSS-CO 8%

6÷8 8÷10

0.02

0.05

0.08

0.12

0.14

0.18

Acciaio alto legato con tenore di manganese >10% High manganese content steel

HSS-CO 8%

3÷5

0.02

0.05

0.08

0.12

0.14

0.18

Superleghe / Nimonic

HSS-CO 5% HSS-CO 8%

3÷8

0.02

0.05

0.08

0.12

0.14

0.18

Titanio / Titanium alloys

HSS-CO 5% HSS-CO 8%

3÷6

0.02

0.05

0.08

0.12

0.14

0.18

Nichel / Monel

HSS-CO

10÷12

0.02

0.05

0.08

0.12

0.14

0.18

Ghisa grigia 200 HB / Cast Iron

HSS HSS-CO

15÷20 20÷25

0.02

0.12

0.20

0.25

0.30

0.40

Ghisa grigia 350 HB / Cast Iron

HSS HSS-CO

5÷10 20÷25

0.03

0.07

0.10

0.16

0.20

0.25

Bronzo dolce / Soft bronze

HSS HSS-CO

20÷35

0.05

0.08

0.14

0.20

0.25

0.30

Bronzo duro / Tough bronze

HSS HSS-CO

15÷30

0.05

0.08

0.14

0.20

0.25

0.30

Ottone dolce / Soft brass

HSS HSS-CO

60÷80

0.08

0.18

0.25

0.30

0.35

0.40

Ottone tenace / Tough brass

HSS HSS-CO

30÷50

0.05

0.15

0.20

0.25

0.35

0.40

Rame puro / Copper

HSS

30÷60

0.05

0.14

0.18

0.22

0.30

0.40

Rame elettrolitico / Electrolite copper

HSS

20÷35

0.05

0.14

0.18

0.22

0.30

0.40

Alluminio / Aluminium

HSS

40÷80

0.05

0.14

0.18

0.22

0.30

0.40

Leghe alluminio / Aluminium alloys

HSS

30÷60

0.05

0.14

0.18

0.22

0.30

0.40

Silumin / Leghe Al-Si Silumin

HSS

30÷50

0.05

0.08

0.14

0.20

0.25

0.30

Leghe al manganese / Manganese alloys

HSS

60÷90

0.08

0.18

0.25

0.30

0.35

0.40

Zinco e le sue leghe / Zinc alloys

HSS

30÷50

0.05

0.14

0.18

0.20

0.25

0.30

Resine termoplastiche (dolci) / Soft plastic

HSS

20÷40

0.05

0.08

0.14

0.20

0.25

0.30

Resine termoplastiche (dure) / Hard plastic

HSS

10÷20

0.05

0.08

0.14

0.20

0.25

0.30

Plexiglass

HSS

15÷20

0.05

0.08

0.14

0.20

0.25

0.30

HSS

15÷35

0.08

0.18

0.25

0.30

0.35

0.40

HSS

3÷6

Gomma dura /

ard rubber

rafite / Graphite

a mano / by hand

Applicazioni Applications

Acqua emulsionata con olio Oil+water

596

Olio da taglio Cutting oil

Acqua Water

A secco Dry

Nota: Le punte elicoidali cilindriche rettificate garantiscono la realizzazione di fori di tolleranza H10÷H12 Fully ground twist drills made holes with H10÷H12 tolerance

CONVERSIONE DELLA VELOCITÀ PERIFERICA DI TAGLIO DA M/MIN IN GIRI/MIN IN FUNZIONE DEL DIAMETRO DELLA PUNTA

Cutting speed chart into revolution per minute (RPM), according to the twist drill diameter

Diametro punta Drill size

Velocità di taglio / Cutting speed Vt 3

mt/min 18

pollici inch

5/64

480

640

800

960

1270

1590

1910

2390

2870

3180

3980

4780

5570

6370

1/8

320

420

530

640

850

1060

1270

1590

1910

2120

2650

3180

3720

4250

Velocità di taglio / Cutting speed

5/32

240

320

400

480

640

800

960

1190

1430

1590

1990

2390

2790

3180

13/64

190

250

320

380

510

640

760

960

1150

1270

1590

1910

2230

2550

15/64

160

210

270

320

420

530

640

800

960

1060

1330

1590

1860

2120

5/16

120

160

200

240

320

400

480

600

720

800

1000

1190

1390

1590

25/64

130

160

190

250

320

380

480

570

640

800

960

1110

1270

15/32

110

130

160

210

270

320

400

480

530

660

800

930

1060

35/64

110

140

180

230

270

340

410

450

570

680

800

910

5/8

100

120

160

200

240

300

360

400

500

600

700

800

23/32

110

140

180

210

270

320

350

440

530

620

710

25/32

100

130

160

190

240

290

320

400

480

560

640

7/8

120

140

170

220

260

290

360

430

510

580

15/16

110

130

160

200

240

270

330

400

460

530

1” 1/16

120

140

180

210

240

290

350

410

470

1” 1/8

110

130

160

190

210

270

320

370

420

1” 1/4

100

120

150

180

200

250

300

350

400

1” 3/8

110

140

170

190

230

280

330

370

1” 7/16

110

130

160

180

220

270

310

350

1” 1/2

100

130

150

170

210

250

290

340

1” 9/16

100

120

140

160

200

240

280

320

1” 5/8

110

140

150

190

230

270

300

1” 3/4

110

130

140

180

220

250

290

1” 13/16

100

120

140

170

210

240

280

1” 7/8

100

120

130

170

200

230

270

2”

100

110

130

160

190

220

250

n° giri/min (r.p.m.) =

Vt (Mt/min) x 1000 3,14 x Ø (mm)

Esempio di utilizzo delle tabelle: Se si vuole praticare un foro del diametro di 8 mm con una punta HSS, in una lamiera in acciaio comune e si desidera conoscere i parametri di taglio adeguati alla foratura, si dovrà consultare la tabella n. 1 nella quale è indicato che una punta HSS da mm 8 avrà un avanzamento consigliato di 0,1 mm/giro ed una velocità di taglio di 10÷12 mt/min. Per la conversione della velocità da mt/min in giri/min, si consulterà la tabella n.2; incrociando la riga riferita al diametro 8 mm con la colonna che contiene la velocità 12 mt/min si troverà il valore di 480 giri/min. Il foro quindi andrà eseguito con una velocità di 480 giri/min e con un avanzamento di 0,1 mm/giro. Una buona lubrorefrigerazione infine garantirà un ottimo risultato di foratura.

Formula di conversione della velocità periferica di taglio da mt/min in n.giri/min in funzione del diametro dell’utensile Cutting tip speed conversion formula, from Meter Per Min. to RPM, in accordance with the tool size

Charts use example: If you want to make a hole of 8 mm with an HSS bit into a metal sheet and you wish to know the correct cutting parameters, have a look on the chart n.1 where you can see that an HSS bit has a suggested feed of 0,1 mm/revolution and a cutting speed of 10÷12 mt/minute. For the speed conversion mt/ min and rpm, please look at the chart n. 2; crossing the line containing the size 8 mm and the column of speed 10÷12 mt/min, you will find the value of 480 rpm .So that the drill should be made with a speed of 480 rpm with 0,1 mm/revolution feed. An appropriate lubricating finally guarantee the best cutting results.

Punta HSS HSS twist drill

12 mt/min = 480 girimin Lamiera in acciaio da costruzione Low alloy steel sheet

Avanzamento 0.1 mm/giro Ø = 8mm

Feed 0.1 mm/round

597

TAGLIO METALLI METAL CUTTING

PARAMETRI DI TAGLIO PER PUNTE IN METALLO DURO O CON PLACCHETTE IN METALLO DURO PER IL TAGLIO DEI METALLI

Recommended cutting parameter chart for tungsten carbide drill bits and carbide tipped twist drills on metals cuttings

TAGLIO METALLI METAL CUTTING

Metallo duro

H.M.

Materiale da lavorare Work-piece material

Diametro punta / Drill size - mm

Resistenza a trazione/durezza Tensile strenght/hardness

Velocità di taglio Cutting speed Mt/min.

Acciaio basso legato Low alloy steel

fino up to 700 N/mm2

80-100

0,025

0,0315

0,05

0,08

0,1

Acciaio legato e alto legato High alloy steel

fino up to 900 N/mm2 oltre / beyond 900 N/mm2

70-90 60-70

0,02 0,0125

0,025 0,016

0,04 0,025

0,05 0,025

0,063 0,04

0,08 0,05

Acciaio per utensili Tool steel

fino up to 1000 N/mm2 oltre / beyond 1000 N/mm2

50-60 20-40

0,0125 0,016 0,01 0,0125

0,025 0,02

0,025 0,025

0,04 0,0315

0,05 0,04

Acciaio temprato Tempered steel

fino up to 60 HRC

10-30

0,0063

0,008

0,0125 0,0125

0,02

0,025

Acciaio per molle Spring steel

20-50

0,01

0,0125

0,02

0,025

0,0315

0,04

Acciaio austenitico Cr-Ni, Inox, resistente agli acidi e al calore Austenitic stainless steel, acid resistant steel, heat resistant steel

20-40

0,008

0,01

0,016

0,02

0,025

0,0315

Acciaio ferritico, inox, resistente al calore Ferritic steel, stainless steel, heat resistant steel

40-60

0,0125

0,016

0,025

0,04

0,05

Acciaio duro al Mn Hard Mn steel

20-40

0,0063

0,008

0,0125 0,0125

0,02

0,025

fino up to 500 N/mm2 oltre / beyond 500 N/mm2

60-80 30-60

0,025 0,016

0,0315 0,05 0,05 0,02 0,0315 0,0315

0,08 0,05

0,1 0,08

fino up to 350 HB oltre / beyond 350 HB

40-60 20-40

0,0125 0,0063

0,016 0,008

0,025 0,025 0,0125 0,0125

0,04 0,02

0,05 0,025

fino up to GG 40

70-100

0,025

0,0315

0,05

0,08

0,1

fino up to GGG 60 fino up to GTW / GTS 55

50-80

0,02

0,025

0,04

0,05

0,063

0,08

80-110

0,02

0,025

0,04

0,05

0,063

0,08

60-80 100-120

0,016 0,025

0,02 0,0315 0,0315 0,0315 0,05 0,05

0,05 0,08

0,063 0,1

100-140

0,0135

0,04

0,063

0,1

0,125

Leghe di alluminio oltre 11% Si Aluminium alloy beyond 11% Si

60-100

0,02

0,025

0,04

0,05

0,063

0,08

Ottone, Zn, Bronzo per getti rass, n, Cast bronze

80-110

0,02

0,025

0,04

0,05

0,063

0,08

Titanio e le sue leghe Titanium alloy

20-40

0,01

0,0125

0,02

0,025

0,0315

0,04

Leghe di magnesio Magnesium alloy

100-150

0,0315

0,04

0,063

0,1

0,125

Materie plastiche dure Hard plastics

60-100

0,0315

0,04

0,063

0,1

0,125

Materie plastiche tenere, laminati, termoplastici Soft plastics, thermoplastics, laminates

80-150

0,04

0,05

0,08

0,1

0,125

0,16

Resine epossidiche rinforzate Reinforced epoxy resins

60-100

0,0315

0,04

0,063

0,1

0,125

Acciaio fuso Cast steel Acciaio fuso legato / Ghisa in conghiglia Alloy cast steel / Chilled iron Ghisa grigia Grey cast iron Ghisa sferoidale / Ghisa malleabile Spheroidal cast iron / Malleable cast iron Rame Copper Bronzo ronze

duro / hard tenero / soft

Le he di alluminio fino a Aluminium alloy up to 11% Si

n° giri/min (r.p.m.) =

598

Vt (Mt/min) x 1000 3,14 x Ø (mm)

2,5

Avanzamento / Feed (mm/giro)

Refrigerante Cooland

NOMENCLATURA PER PUNTE ELICOIDALI CILINDRICHE

4 1

5 2 3 4 6 7 8

Split Point DIN 1412C 10

(d) Codolo / Shank

(Ø) Diametro / Diameter

(l)

(L) Lunghezza totale / Overall length

( ) Angolo dell’elica / Helix angle

TAGLIO METALLI METAL CUTTING

Twist drill nomenclature

Elica / Flute

Angolo dei taglienti / Point angle

Angolo di spoglia / Lip clearance angle

Angolo del tagliente centrale / Chisel edge angle

Fase / Land

Profondità dello scarico / Depth of body clearance

Nocciolo / Web thickness

PROFONDITÀ DI FORATURA INDICATIVE PER PUNTE ELICOIDALI Cutting depth according to twist drill standard

5 DIN 1897

DIN 338

DIN 345

DIN 340

DIN 341

DIN 1869

DIN 1870

RELAZIONE TEORICA TRA LA VELOCITÀ DI TAGLIO E LA VITA UTILE DELL’UTENSILE Theoretical link between the cutting speed and the tool life cycle

6 LEGGE DI TAYLOR Vt x Tn = C Vt è la velocità di taglio espressa in m/min T è la vita utile dell’utensile espressa in min / C (m/min) e n sono costanti che dipendono dalla tipologia di utensile. In particolare, per utensili HSS C=60 m/min e n=0.15, per utensili in metallo duro C=300 m/min e n=0.3

Vt is the cutting speed in m/min T is the tool life cycle in min / C=60 m/min, n=0,15 for HSS cutting tools, C=300 m/min, n=0,3 for hard metal cutting tools. C (m/min) and n are constant values depending on the tool type

Una punta HSS di diametro 8 mm ha un ciclo di vita teorico di: 2500 h se usata a 400 giri/min - 25 h se usata a 800 giri/min. HSS twist drill Ø 8 mm has a theorical tool life cycle of 2500h at 400rpm, 25h at 800rpm

599

VELOCITÀ DI TAGLIO PER FRESE A INCASSARE, SVASARE E SBAVARE IN FUNZIONE DEL MATERIALE DA LAVORARE

Recommended cutting parameter chart for countersinks and deburring tools in accordance with the materials to work

TAGLIO METALLI METAL CUTTING

Frese a svasare

Deburring tools

Materiale da lavorare Work-piece material Acciaio non legato

Velocità di taglio Cutting speed Mt/min 20

Carbon steel

Acciaio le ato fino a

N/mm2

Alloy steel up to 700 N/mm2

Acciaio le ato fino a

N/mm2

Alloy steel up to 1000 N/mm2

hisa fino a

N/mm2 Cast iron up to 250 N/mm2

Ghisa oltre 250 N/mm

10 8

Cast iron beyond 250 N/mm

Ottone fragile Fragile brass

Ottone plastico

Tough brass

Le he di alluminio fino a Materiale termoplastico

Aluminium alloys up to 11% Sì

Thermoplastics

Materiale termoindurente

Refrigerante Cooland

Thermosetting plastics

PARAMETRI DI TAGLIO PER UTENSILI CONICI IN FUNZIONE DEL MATERIALE DA LAVORARE Recommended cutting parameter chart for conical drill bits in accordance with the materials to work

Utensili conici

Conical drill bits

Materiale da lavorare Work-piece material

Profondità di foratura Cutting depth mm

Acciaio inox e alto legato

Grandezza Size 1 3÷14

2 6÷20

3 16÷30,5

4 26÷40

5 36÷50

6 40÷61

7 3÷31

8 3÷22,5

Giri/min - rpm

750

500

280

200

150

130

400

500

1100

740

420

300

220

190

580

740

N/mm2 Cast iron up to 250 N/mm2

560

360

200

150

110

100

300

360

Ghisa oltre 250 N/mm2 Cast iron beyond 250 N/mm2

380

240

140

100

200

240

Ottone fragile

Fragile brass

2200

1500

830

600

440

400

1100

1500

Ottone tenace

Acciaio basso legato hisa fino a

Stainless steel high alloy steel

Low alloy steel

Tough brass

1300

860

480

340

260

220

680

860

Leghe leggere Light alloys

1100

740

420

300

220

190

580

740

Plastica

1300

860

480

340

260

220

680

860

Plastics

Refrigerante Cooland

PARAMETRI DI TAGLIO PER UTENSILI A GRADINO IN FUNZIONE DEL MATERIALE DA LAVORARE Recommended cutting parameter chart for step drills in accordance with the materials to work

Utensili a gradino

Step drill bits

Materiale da lavorare Work-piece material

Profondità di foratura 1 Cutting depth 4÷12

Grandezza Size 2 4÷12

3 12÷20

4 4÷20

5 20÷30

6 4÷30

7 30÷40

8 40÷50

9 6÷36

10 6÷58

11 21 22 23 4÷39 6,3÷26,75 6÷30,5 6÷37

24 6÷38

Giri/min - rpm

mm Acciaio inox e alto legato Stainless steel high alloy steel

3÷4

800

400

530

250

380

180

140

300

200

300

400

350

300

Acciaio basso legato

3÷4

1200 1200

600

800

380

560

280

200

450

300

450

600

530

450

hisa fino a N/mm2 Cast iron up to 250 N/mm2

3÷4

600

300

400

190

280

140

100

230

150

230

300

260

230

Ghisa oltre 250 N/mm Cast iron beyond 250 N/mm2

3÷4

400

200

260

130

190

150

100

150

200

180

150

Ottone fragile Fragile brass

3÷4

2400 2400 1200

1600

760

1100

550

420

900

600

900

1200 1000

900

Ottone tenace

Tough brass

3÷4

1400 1400

700

920

450

650

320

240

530

350

530

700

620

530

Leghe leggere Light alloys

3÷4

1200 1200

600

800

380

560

280

200

450

300

450

600

530

450

Plastica

3÷4

1400 1400

700

920

450

650

320

240

530

350

530

700

620

530

Low alloy steel

600

Plastics

Refrigerante Cooland

VELOCITÀ DI TAGLIO PER FRESE A INCASSARE, SVASARE E SBAVARE IN FUNZIONE DEL MATERIALE DA LAVORARE

Recommended cutting parameter chart for countersinks and deburring tools in accordance with the materials to work

Hole cutters

Ø Fresa / Hole cutter mm 12÷17

18÷24

25÷32

33÷38

39÷44

46÷51

52÷57

58÷64

65÷70

71÷80

81÷90

91÷100

Refrigerante Cooland

n. giri/min - rpm Acciaio basso legato Low alloy steel

550

380

300

240

200

170

150

130

120

110

100

Acciaio inox e alto legato Stainless steel high alloy steel

230

160

130

100

Ghisa Cast iron

280

190

150

120

100

Leghe leggere Light alloys

870

590

470

370

310

270

240

210

190

170

150

140

Alluminio Aluminium

870

590

470

370

310

270

240

210

190

170

150

140

Plastica Plastics

660

450

350

280

240

210

180

160

150

130

120

100

VELOCITÀ DI TAGLIO PER FRESE A CAROTARE IN FUNZIONE DEL MATERIALE DA LAVORARE Recommended cutting parameter chart for core bits in accordance with the materials to work

Frese a carotare in HSS

11 Materiale da lavorare Work-piece material

HSS Core drills

ø Fresa / Hole cutter mm 12÷15

16÷20

21÷25

26÷30

31÷35

36÷45

50÷60

Refrigerante Cooland

n. giri/min - rpm Acciaio basso legato Low alloy steel

660

480

370

310

260

200

160

Acciaio inox e alto legato Stainless steel high alloy steel

290

210

170

140

120

Ghisa Cast iron

340

250

190

160

140

110

Leghe leggere Light alloys

1030

740

580

480

410

320

240

VELOCITÀ DI TAGLIO PER FRESE A CAROTARE CON DENTI IN METALLO DURO Recommended cutting parameter chart for core bits in accordance with the materials to work

12 Materiale da lavorare Work-piece material

Frese a carotare in HM

HM Core drills

Ø Fresa / Hole cutter mm 12÷15

16÷20

21÷25

26÷30

31÷35

36÷45

50÷60

Refrigerante Cooland

n. giri/min - rpm Acciaio basso legato Low alloy steel

1220

880

690

570

480

380

290

Acciaio inox e alto legato Stainless steel high alloy steel

860

620

480

400

340

270

200

Ghisa Cast iron

980

710

550

450

390

300

230

Leghe leggere Light alloys

1470

1060

380

680

580

450

350

601

TAGLIO METALLI METAL CUTTING

Materiale da lavorare Work-piece material

Frese a tazza

VELOCITÀ DI TAGLIO PER FRESE A TAZZA TCT IN FUNZIONE DEL MATERIALE DA LAVORARE

Recommended cutting parameter chart for TCT hole cutters in accordance with the materials to work

TAGLIO METALLI METAL CUTTING

Frese a tazza T.C.T.

T.C.T. Hole cutters

Materiale da lavorare Work-piece material

Spessore di foratura Cutting depth

Ø Frese TCT / TCT hole cutter mm 15÷20

21÷25

26÷30

31÷40

41÷50

51÷70

Refrigerante Cooland

n. giri/min - rpm

mm Acciaio basso legato Low alloy steel

710

550

450

360

280

210

Acciaio inox e alto legato Stainless steel high alloy steel

530

420

340

270

210

160

Ghisa Cast iron

620

480

400

320

250

190

Ottone Brass

800

620

510

410

320

240

Alluminio Aluminium

880

690

570

450

350

270

Plastica Plastics

740

580

480

380

300

220

VELOCITÀ DI TAGLIO PER SEGHE A TAZZA IN FUNZIONE DEL MATERIALE DA LAVORARE Recommended cutting parameter chart for bimetal hole saws in accordance with the materials to work

Seghe a tazza

14 Materiale da lavorare Work-piece material

Bimetal hole saws Ø Sega / Hole saw mm 14÷17

19÷24

25÷32

33÷38

40÷44

46÷51

52÷57

59÷64

65÷70

73÷79

83÷89

92÷98 102÷108 111÷121 127÷140 146÷152 160÷210

n. giri/min - rpm Ferro / Acciaio dolce Low alloy steel

530

360

280

230

190

170

140

130

120

110

Acciai trattati - Acciai inox Stainless steel - High alloy steel

210

140

110

Ghisa Cast iron

250

170

140

110

180

Ottone Brass

740

510

400

320

270

230

200

180

170

150

130

120

110

100

Alluminio e leghe leggere Aluminium Light alloys

850

580

450

360

300

270

230

210

190

170

150

130

120

110

100

Legno Wood

960

650

510

410

340

300

260

230

210

190

170

150

140

120

110

100

Plastica Plastics

640

430

340

270

230

200

170

150

140

130

110

100

Cartongesso ypsum board

960

650

510

410

340

300

260

230

210

190

170

150

140

120

110

100

602

Refrigerante Cooland

VELOCITÀ DI TAGLIO IN FUNZIONE DEL DIAMETRO DELLA FRESA ROTATIVA IN HSS

Recommended cutting parameter chart for HSS rotary files Z2: Vt 220 ÷ 250 m/min Z3: Vt 80 ÷ 220 m/min

Velocità di taglio / Cutting speed Mt/min 80

100

150

200

220

230

240

250

TAGLIO METALLI METAL CUTTING

Diametro fresa Rotary burr diameter mm

Frese rotative HSS

n. giri/min - rpm 6

4250

5310

7960

10620

11680

12210

12740

13270

3180

3980

5970

7960

8760

9160

9550

9950

2550

3180

4780

6370

7010

7320

7640

7960

2120

2650

3980

5310

5840

6100

6370

6630

1700

2120

3180

4250

4670

4880

5100

5310

VELOCITÀ DI TAGLIO IN FUNZIONE DEL DIAMETRO DELLA FRESA ROTATIVA IN METALLO DURO Recommended cutting parameter chart for carbide rotary files

Frese rotative HM

Tutti i tipi di taglio / All cut types (HM1,HM3 PLUS, HM3, HM4): Vt 300 ÷ 400 m/min Diametro fresa Rotary burr diameter mm

Bimetal hole saws

Velocità di taglio / Cutting speed Mt/min 300

320

340

360

380

400

n. giri/min - rpm 6

15930

16980

18050

19100

20170

21230

11950

12740

13535

14330

15130

15920

9550

10190

10830

11465

12100

12740

7960

8490

9020

9560

10085

10620

5970

6370

6770

7160

7570

7960

603

PARAMETRI DI TAGLIO DELLA SEGA CIRCOLARE IN HSS

Recommended cutting parameter chart for HSS band saw blades

TAGLIO METALLI METAL CUTTING

Seghe circolari HSS

HSS circular blades

Materiale da lavorare Work-piece material

Velocità avanzamento Feed rate

Velocità periferica di taglio Cutting speed

mm/min

mt/min

15÷25

70÷100

10÷15

25÷35

Acciaio con R<500 N/mm2 Steel with R<500 N/mm2 Acciaio con R<800 N/mm Steel with R<800 N/mm2

Acciaio con R<1000 N/mm Steel with R<1000 N/mm2

5÷10

30÷40

Acciaio con R<1400 N/mm2 Steel with R<1400 N/mm2

5÷7

15÷25

Acciaio inox Stainless steel

5÷7

25÷35

Ghisa Cast iron

10÷15

50÷70

Alluminio Aluminium

20÷40

70÷150

Ottone e Bronzo rass and bronze

20÷40

70÷150

Rame Copper

20÷40

70÷150

Plastica Plastics

20÷50

100÷200

Refrigerante Cooland

PARAMETRI DI TAGLIO DELLA SEGA CIRCOLARE IN METALLO DURO Recommended cutting parameter chart for carbide band saw blades

Seghe circolari H.M.

18 Materiale da lavorare Work-piece material

H.M. circular blades

Velocità periferica di taglio Cutting speed (mt/sec.)

Velocità di avanzamento Feed rate (mt/min.)

Legno tenero Soft wood

60÷90

10÷40

Legno duro Hard wood

50÷70

10÷30

Compensato truciolare Plywood-chipboard

60÷80

10÷20

Plastica Plastics

25÷60

5÷10

Alluminio Aluminium

20÷30

5÷8

Ferro, Acciaio dolce Iron, Steel

20÷30

5÷8

Leghe leggere Light alloys

20÷30

5÷8

604

Art 27050

Art 27055

Art 27060

Art 27070

Refrigerante Cooland

SCELTA DELLA LAMA E DEI SUOI PARAMETRI DI TAGLIO IN FUNZIONE DEL MATERIALE DA LAVORARE

Chart for blades selection and relative cutting speed in accordance with the materials to work

Lame a nastro

Materiale da lavorare Work-piece material

Valori DIN M-42 Art 25016

M-42 Art 25010

M-42 Art 25011

ASP Art 25018

Velocità di taglio Cutting speed Mt/min

Refrigerante Cooland

Acciai da costruzione Structurall steels

St 37 / St 44 St 50 / St 60

80-100 50-70