Floor Category EN

Floor

Category

Floor

Shortcut to perfectly prepared and sealed floors Penosil Floor category products offer a complete solution for the floor's life cycle. There are products for preparing the surfaces before floor installation, installing different floor coverings and also for floor reparation works.

Preparing the sub-surfaces and installing the floor coverings correctly is not only aesthetically pleasing but also increases the floor's lifespan.

Our Floor category products are heavy-wear resistant and can be used for a multitude of floor covering materials such as concrete, parquet and soft floor coverings (linoleum, vinyl and carpets, etc.).

The sequence of works to follow: 1. Products to use for strengthening concrete floors: ■

Use DustProofer 612, our waterglass coating, for strengthening and dust-proofing interior concrete floors.

2. Products to use for sealing joints, gaps and cracks: Use our high modulus MS Polymer hybrid sealant with high movement capability: Floor Joint Hybrid 25HM for trafficable interior and exterior flooring joints such as concrete expansion and perimeter joints.

■ Self-Levelling Hybrid 716 and PU-Sealant HM 868 can be used for sealing and filling heavy-wear interior and exterior concrete floor joints, such as shrink control and welding joints.

■

3. Products to use for repairing and sealing wooden flooring: ■

For filling and sealing wooden flooring joints, use Parquet Filler 630, which offers a wide range of colours to ensure a suitable match can be found for any wooden flooring type.

Floor

Floor Joint Hybrid 25HM

Parquet Filler 630

Self-Levelling Hybrid 716 PU-Sealant HM 868

DustProofer 612

Floor

DustProofer

612 5 l / 10 l / 20 l canister

Traffic resistant

Colour

Low VOC

Low odour

Dust-proofing and concrete strengthening solution

ÉMISSIONS DANS L’AIR INTÉRIEUR*

C

A+ A B C

Wear-resistant Dust repellent ■ Preserves the breathability of concrete ■ Oil, chemical and water resistant ■ Evenly seals concrete floor's top layer ■ ■

Dustproofing and strengthening floors in garages, car parks, storage units and industrial buildings.

Protecting staircases, bridges and other interior concrete surfaces.

Floor Joint Hybrid

25HM 400 ml / 600 ml foil package

Elastic

Colour

Can be painted

Traffic resistant

Hybrid sealant for filling and sealing high movement connecting joints High movement capability (±25 %) and high modulus ■ High wear resistance ■ UV and weatherproof ■ Adheres to damp surfaces ■ Almost no shrinkage ■

Sealing trafficable interior flooring joints such as concrete expansion and perimeter joints.

Suitable to be used instead of skirting boards.

Sealing and bonding interior and exterior high-movement connecting joints, e.g. between walls and floors, stairs, balconies, window- and door frames.

F-EXT-INT-CC; PW-INT

Floor

Self-Levelling Hybrid

716

Colour

600 ml foil package

Oil resistant

Traffic resistant

Waterproof

Self-levelling hybrid sealant for heavy-wear horizontal floor joints Easy to apply; flowing consistency Fast curing ■ Non-shrinking ■ Self-levelling; does not require smoothing ■ Adheres to damp surfaces ■ ■

Filling horizontal floor joints in garages, car parks, storage units, warehouses, industrial buildings, etc.

Filling joints in terraces, pedestrian streets, bridges, etc.

Sealing joints between floor tiles, brick, etc.

F-EXT-INT-CC: FG-20E

PU-Sealant

HM 868 300 ml cartridge 600 ml foil package

Weatherproof

Colour

Long processing time

Traffic resistant

Elastic PU sealant for sealing and insulating heavy-wear interior and exterior surfaces High movement capability High modulus ■ Permanently elastic ■ Heavy-wear resistant ■ UV and weatherproof ■ ■

Sealing concrete joints such as shrink control and other heavywear floor joints.

Sealing welding joints.

Sealing and insulating joints in caravans, motor homes, etc.

Sealing joints in the naval industry.

F-EXT-INT-CC:25HM; PW-EXT-INT-CC:25HM

Floor

Parquet Filler

630 300 ml

Colour

cartridge

Can be sanded

Can be painted

Low odour

Acrylic parquet sealant for filling and sealing all wooden floor joints Suitable for repair works Can be used for furniture restauration ■ Insulating and sealing ■ All wooden floor surfaces ■ Solvent-free ■ ÉMISSIONS DANS L’AIR INTÉRIEUR*

C

A+ A B C

■

Sealing varnished and unvarnished parquet floor joints.

Sealing and levelling surfaces and connections in carpentry.

Repairing gaps and cracks in wooden and laminated surfaces.

Furniture restoration.

SEALANTS: Tips and tricks Best results: Make sure surfaces are clean, dry and free from any dust, loose particles and oil stains.

■ Use a vacuum cleaner to clean the deeper joints.

■ Cover the adjacent surfaces with masking tape to ensure crisp and clean joint edges.

■ During the curing process, make sure that sealed surfaces stay clean and are not under mechanical stress.

■ For best finishing, use an appropriate smoothing tool.

■

How to use: Cartridge: Cut the tip of the cartridge.

■ Screw on the nozzle and cut an opening at a 45° angle which is slightly larger than the joint to be sealed.

■ Place the cartridge onto a sealant gun.

■ Foil package: Place the package into the foil pack gun.

■ Snip the top off the foil package, just below the metal clip. Screw on the nozzle with the cap.

■ Cut an opening into the nozzle at a 45° angle which is slightly larger than the joint to be sealed.

■ Apply the sealant by keeping an even pressure at the gun trigger and smoothly dragging the nozzle along the joint.

■ Spray some Penosil Sealant Finisher 407 on the sealant, remove the excess sealant and smooth the surface with a spatula.

■

■

Remove the tape immediately after application and clean the adjacent surfaces, tools and hands with water or Penosil Cleaning Wipes 941.

Floor

COATINGS: Tips and tricks Best results ■ Surfaces to be treated must be clean, dry and free from any dust or loose particles.

■ Prior to applying the product, freshly poured concrete surfaces should be left to dry for approximately 21 days (+23°C, 50 % RH).

■ The best result is achieved by treating previously polished surfaces.

■ To achieve a smooth and uniform end result, it is important to remove after the drying time all solution that has not penetrated into the surface. Otherwise, spots may appear on the surface.

■ Final drying time is 24 hours.

■ When treating the surface in three stages, the product consumption is about 0.5 l/m².

■ Clean the tools with water, remove cured product mechanically.

How to use The surface is treated in three consecutive stages: ■ First stage: mix the solution with water in a ratio of 1:2.

■ Apply the mix with a soft brush.

■ Be sure to saturate the surface so that the solution can penetrate into the concrete.

■ Leave the surface to dry for approximately 40 to 60 min.

■ Remove the excess product from the surface with a clean cloth and continue immediately with next stage.

■ Second stage: mix the solution with water in a ratio of 1:1 and follow the same steps as in stage one.

■ Third stage: mix the solution with water in a ratio of 2:1 and follow the same steps as in stage one.

■

●

●

●

Ceramic tiles

Painted surfaces

●

●

●

●

●

●

Glass

●

●

●

●

Plastics

●

●

●

●

●

Masonry

●

●

●

Bricks

●

Metals

●

Concrete

●

PU-Sealant HM 868

●

●

Parquet

●

Self-Levelling Hybrid 716

Plasterboard

●

Wood

Suitable for:

Floor Joint Hybrid 25HM

●

●

●

●

●

●

●

Parquet Filler 630

●

DustProofer 612

Floor

Our other categories are: General Construction Window & Door Roof & Facade Sanitary Decoration Fireproofing / High Temperature Adhering Cleaning Sustainable Construction

penosil.com Wolf Group OÜ Phone +372 6059 300 wg@wolf-group.com