Fabric Vine

3. Arrange and sew together eight !2” x $2” Fabric A pieces, eight assorted blocks from step 2, and one @2” x $2” Fabric A strip as shown. Press. Make two. !2”

!2”

!2”

!2”

@2”

!2”

!2”

!2”

!2”

$2”

Make 2

4. Sew two @!2” x !@2” Fabric E piece together as shown. Press. @!2”

@!2”

!@2”

5. Sew !2” x $@” Fabric B strips end-to-end to make one continuous !2”-wide Fabric B strip.

Press. Measure both rows length from step 3 they should measure the same at 4@2”. Cut one strip to this measurement. Note if rows measure differently than listed, repress and measure rows again then cut strips to measurement you obtained. Adjust step 4 unit if needed.

6. Sew !”-wide Fabric C strips together end-to-end, press, and cut four strips to measurement obtain in step 5. Sew !”-wide Fabric D strips together, press and cut four strips to measurement.

7. Cut two $%” x @” Fabric A strips to measurement obtained in step 5. Arrange and sew together two @”-wide Fabric A strips, four !”-wide Fabric C strips, four 1”-wide Fabric D strips, two units from step 3, and one unit from step 4 as shown. Press. @” !” !”

!” !”

!@2”

!” !”

!” !” @”

$@2”

8. Fold unit from step 7 in half, right sides together, folded piece should measure @!4” x @&2”. Sew along one short side and length of unit, leaving one short side free of stitches.

Turn inside out and press.

9. Referring to measurement obtained in step 5, cut one !)2”-wide Fabric A strip to that measurement.

38 fabric vine 2015