©2015 KCM Corporation. All rights reserved.Printed in Japan (K) ( オセアニア用 ) 93207-01080 September 2015
MANUAL WHEEL LOADER 62Z7/67Z7/ 67TM7 General Information Function & Structure Powered by ISUZU 4HK1 Engine Serial No. 62J1-8001 and up 65J5-8001 and up General Information 62Z7/67Z7/67TM7 SHOP MANUAL 93207-01080 Function & Structure
SHOP
SHOP MANUAL (Function & Structure)
All information, illustrations and specifications in this manual are based on the latest product information available at the time of publication. The right is reserved to make changes at any time without notice.
93207-01080 September 2015
62Z7/67Z7/67TM7
INTRODUCTION ........................................................................................................................... IN-01~02 Symbol and Abbreviation ............................................................................................................... SY-1~2 SECTION 1 GENERAL Group 1 Specifications .......................................................................................................... T1-1-1 Group 2 Component Layout .................................................................................................. T1-2-1 Group 3 Component Specifications ...................................................................................... T1-3-1 SECTION 2 SYSTEM Group 1 Controller ................................................................................................................. T2-1-1 Group 2 Control System........................................................................................................ T2-2-1 Group 3 ECM System ........................................................................................................... T2-3-1 Group 4 Hydraulic System .................................................................................................... T2-4-1 Group 5 Electrical System..................................................................................................... T2-5-1 SECTION 3 COMPONENT OPERATION Group 1 Pump Device ........................................................................................................... T3-1-1 Group 2 HST Motor ............................................................................................................... T3-2-1 Group 3 Multiple Control Valve ............................................................................................. T3-3-1 Group 4 Fan Motor and Fan Valve ........................................................................................ T3-4-1 Group 5 Steering Valve ......................................................................................................... T3-5-1 Group 6 Priority Valve ........................................................................................................... T3-6-1 Group 7 Pilot Valve................................................................................................................ T3-7-1 Group 8 Brake Charge Valve ................................................................................................ T3-8-1 Group 9 Manifold Valve ......................................................................................................... T3-9-1 Group 10 Transmission ......................................................................................................... T3-10-1 Group 11 Axle ....................................................................................................................... T3-11-1 Group 12 Brake Valve ........................................................................................................... T3-12-1 Group 13 Ride Control Valve ................................................................................................ T3-13-1 Group 14 Others.................................................................................................................... T3-14-1
Electrical Connection
Wiring Diagrams Hydraulic Circuit
DIAGRAMS
Diagram
Diagram
To The Reader
INTRODUCTION
This manual is written for an experienced technician to provide technical information needed to maintain and repair this machine.
Be sure to thoroughly read this manual for correct product information and service procedures.
Additional References
Please refer to the other materials (operation and maintenance manual, parts catalog, engine technical material, Kawasaki shop materials, etc.) in addition to this manual.
Manual Composition
Our shop manuals consist of the Technical Manual, the Workshop Manual and the Engine Manual.
Information included in the Technical Manual: Technical information needed for machine pre-delivery and delivery, operation and activation of all devices and systems, operational performance tests, and troubleshooting procedures.
Page Number
Each page has a number, located on the center lower part of the page, and each number contains the following information:
Example:
Technical Manual: T 1-3-5
T Technical Manual
1 Section Number
3 Group Number
5 Consecutive Page Number for Each Group
Information included in the Workshop Manual: Technical information needed for maintenance and repair of the machine, tools and devices needed for maintenance and repair, maintenance standards, and removal / installation and assembly / disassembly procedures.
Information included in the Engine Manual: Technical information needed for machine pre-delivery and delivery and maintenance and repair of the machine, operation and activation of all devices and systems, troubleshooting and assembly / disassembly procedures.
Workshop Manual: W 1-3-2-5
W Workshop Manual (Disassembly & Reassembly)
1 Section Number
3 Group Number
2 Sub Group Number
5 Consecutive Page Number for Each Group
IN-01
Safety Alert Symbol and Headline Notations
In this manual, the following safety alert symbol and signal words are used to alert the reader to the potential for personal injury of machine damage.
d This is the safety alert symbol. When you see this symbol, be alert to the potential for personal injury. Never fail to follow the safety instructions prescribed along with the safety alert symbol. The safety alert symbol is also used to draw attention to component/part weights.
d CAUTION: Indicated potentially hazardous situation which could, if not avoided, result in personal injury or death.
IMPORTANT:
Indicates a situation which, if not conformed to the instructions, could result in damage to the machine.
NOTE: Indicates supplementary technical information. Units Used
To avoid injury and damage, be sure to use appropriate lifting techniques and equipment when lifting heavy parts.
SI Units (International System of Units) are used in this manual. MKSA (Meter, Kilogram, Second, Ampere) system units and English units are also indicated in parentheses just behind SI units.
fExample: 24.5 MPa (250 kgf/cm2, 3560 psi)
A table for conversion from SI units to other system units is shown below for reference purposes.
fNOTE: The numerical value in this manual might be different from the above-mentioned table.
IN-02
INTRODUCTION
Quantity To Convert From Into Multiply By Length mm in 0.03937 mm ft 0.003281 Volume L US gal 0.2642 L US qt 1.057 m3 yd3 1.308 Weight kg lb 2.205 Force N kgf 0.10197 N lbf 0.2248 Torque N·m kgf·m 0.10197 Pressure MPa kgf/cm2 10.197 MPa psi 145.0 Power kW PS 1.360 kW HP 1.341 Temperature °C °F °C×1.8+32 Velocity km/h mph 0.6214 min-1 rpm 1.0 Flow rate L/min US gpm 0.2642 mL/rev cc/rev 1.0
Symbol and Abbreviation
Symbol and Abbreviation
Symbol / Abbreviation Name
T/M Transmission
S/M Shop Manual
MC Main Controller
ECM Engine Control Module
VGS VGT Variable Geometry System controller Variable Geometry Turbo controller
Explanation
Transmission
Shop manual (Function and Structure, Operational Performance Test / Troubleshooting, Disassembly and Reassembly).
Main controller. MC controls the engine, pump, and valve according to the machine operating condition.
Engine controller. ECM controls fuel injection amount according to the machine operating condition.
Variable turbo controller. VGS is an exhaust turbo charged system to supercharge the exhaust energy while running the engine at slow idle speed. VGS optimizes the turbine rotation, improves the performance at slow-speed torque and the acceleration, reduces fuel consumption, and reduces particulate matter (PM) by adjusting the nozzle opening of turbine housing.
HST Controller Hydrostatic Transmission Controller
Hydrostatic transmission controller. Hydraulic pump and motors drive the clutch where all power is transmitted by hydraulic fluid. HST controller controls the transmission, HST pump and HST motors according to the machine operating condition.
GSM Global System for Mobile communications controller
GPS Global Positioning System
CAN Controller Area Network
Communication controller. GSM is a type of wireless communication system, is used in more than on 100 countries around Europe and Asia, and becomes the factual global standards of the mobile telephone.
Global positioning system.
CAN communication. CAN is a serial communications protocol internationally-standardized by ISO (International Organization for Standardization).
A/C Air Conditioner Air conditioner. OPT Option Optional component.
MPDr. Maintenance Pro Dr.
A/I, A/S Auto-idling Stop
MPDr. is software that troubleshooting, monitoring, and adjustment.
Auto-idling stop function
WU Warming-Up Warming-up.
Li Low (Slow) Idle
Slow idle engine speed. ATT Attachment Attachment.
SY-2
Symbol / Abbreviation
Symbol and Abbreviation
Name
DPF Diesel Particulate Filter
DPD Diesel Particulate Diffuser
Explanation
DPF is a filter which removes particulate matter (PM) including the toxic substance of exhaust gas of the diesel engine. Exhaust particulate removal equipment.
DPD is an exhaust emission control system, a type of DPF, which cleans up particulate matter (PM) of diesel engine exhaust gas. DPD is a ceramic filter which traps and filters PM of exhaust gas. DPD burns up accumulated PM when PM increases and regenerates the filter.
DOC Diesel Oxidation Catalyst
CSF Catalyzed Soot Filter
Oxidation catalyst for the diesel engine. Diesel oxidation catalyst oxidizes unburnt fuel and raises exhaust temperature.
Filter. The filter traps, burns, and remove particulate matter (PM) by using high-temperature-exhaust gas with diesel oxidation catalyst. Catalyst is applied onto the filter. This advances PM burning.
PM Particulate Matter
EGR Exhaust Gas Recirculation
Particulate matter in gas
The EGR control re-circulates a part of exhaust gas in the intake manifold and combines it with intake-air. Therefore, combustion temperature is lowered and generation of oxide of nitrogen (NOx) is controlled.
2
SY-
SECTION 1
GENERAL
Group
CONTENTS
Group
Group
62Z7/67Z7/67TM7 (OCE)
1 Specifications Specifications (62Z7/67Z7).............................................. T1-1-1 Specifications (67TM7) T1-1-2
Component Layout Main Component Layout (Overview) T1-2-1 Main Component Layout (Hydraulic System) T1-2-3 Main Component Layout (Travel System) .................. T1-2-5 Electrical System (Overview) T1-2-6 Electrical System (Cab) T1-2-7 Front Console .................................................................. T1-2-8 Right Console .................................................................. T1-2-9 Rear Console T1-2-11 Monitor Panel T1-2-12 Engine ................................................................................... T1-2-13 Exhaust Filter ...................................................................... T1-2-15 HST Pump, 4-Gear Pump Unit T1-2-16 Transmission, HST Motor T1-2-17 Control Valve....................................................................... T1-2-17 Manifold Valve.................................................................... T1-2-18 Brake Charge Valve T1-2-18 Fan Valve (for One Direction Rotation) T1-2-19 Fan Valve (with Fan Reverse Rotation)....................... T1-2-19 Ride Control Valve............................................................. T1-2-20 Secondary Steering Block (Option) T1-2-21 Secondary Steering Pump (Option) T1-2-21 Solenoid Valve (In Front Chassis) ................................. T1-2-22
2
3 Component Specifications Engine ..................................................................................... T1-3-1 Engine Performance Curve (4HK1XZWT-01) T1-3-4 Engine Accessories T1-3-5 Hydraulic Component T1-3-7 Electrical Component ...................................................... T1-3-12
Specifications (62Z7/67Z7)
SECTION 1 GENERAL
Group 1 Specifications
fNOTE:
* BOC (Bolt-On Cutting Edge)
These specifications are subject to change without notice.
T1-1-1
Model - 62Z7 67Z7 Bucket Capacity: heaped m3 (Y3) *2.1 (2.75) *2.4 (3.14) Operating Weight kg (lb) 11060 (24383) 11980 (26411) Tipping Load (Full Turn) kg (lb) 7900 (17417) 8880 (19577) Engine ISUZU 4HK1 ISUZU 4HK1 A: Overall Length mm (in) 7135 (281) 7430 (292.5) B: Overall Width (Bucket) mm (in) 2560 (100.8) 2560 (100.8) C: Overall Height mm (in) 3265 (128.5) 3265 (128.5) D: Wheel Base mm (in) 3000 (118) 3000 (118) E: Tread mm (in) 1930 (76) 1930 (76) F: Ground Clearance mm (in) 430 (17) 430 (17) G: Bucket Hinge Height mm (in) 3805 (150) 3835 (151) H: Dumping Clearance (45 °) mm (in) 2810 (110.6) 2800 (110.2) I: Dumping Reach (45 °) mm (in) 840 (33.1) 960 (37.8) R1: Minimum Rotation Radius mm (in) 5085 (200) 5085 (200) R2: Minimum Rotation Radius mm (in) 5900 (232.3) 5950 (234.3) Travel Speed Forward/Reverse km/h (mph) 39 (24.2)/39 (24.2) 39 (24.2)/39 (24.2) Transmission Speeds (F/R) - 4/4 4/4 Articulation Angle (Left/Right) deg ( ° ) 40 40 Tire Size - 20.5-25-12PR (L2) 20.5-25-12PR (L2)
B G C 40° R2 R1 E H 45° I F D A
MNDF-12-001
Specifications (67TM7)
SECTION 1 GENERAL
Group 1 Specifications
fNOTE: * BOC (Bolt-On Cutting Edge)
These specifications are subject to change without notice.
T1-1-2
Model Quick Coupler General Purpose (Stock Pile) Bucket Capacity: heaped m3 (Y3) 2.1 (2.8) 2.4 (3.1) Operating Weight kg (lb) 12730 (28065) 12470 (27495) Tipping Load (Full Turn) kg (lb) 7100 (15655) 7830 (17265) Engine ISUZU 4HK1 ISUZU 4HK1 A: Overall Length mm (in) 7840 (309) 7680 (302) B: Overall Width (Bucket) mm (in) 2560 (101) 2560 (101) C: Overall Height mm (in) 3265 (128.5) 3265 (128.5) D: Wheel Base mm (in) 3000 (118) 3000 (118) E: Tread mm (in) 1930 (76) 1930 (76) F: Ground Clearance mm (in) 430 (17) 430 (17) G: Bucket Hinge Height mm (in) 3970 (156) 3970 (156) H: Dumping Clearance (45°) mm (in) 2705 (106.5) 2820 (111) I: Dumping Reach (45°) mm (in) 1350 (53) 1245 (49) R1: Minimum Rotation Radius mm (in) 5085 (200) 5085 (200) R2: Minimum Rotation Radius mm (in) 6020 (237) 5980 (235) Travel Speed Forward/Reverse km/h (mph) 39 (24.2)/39 (24.2) 39 (24.2)/39 (24.2) Transmission Speeds (F/R) - 4/4 4/4 Articulation Angle (Left/Right) deg ( ° ) 40 40 Tire Size - 20.5-25-12PR (L2) 20.5-25-12PR (L2)
50° B G C 40° R2 R1 E H 45° I F D A
MNDF-12-003
SECTION 1 GENERAL Group 2 Component Layout
Main Component Layout (Overview)
T1-2-1
6 1 2 3 7 8 9 5 4
1- Bucket
2- Bell Crank (Lever)
3- Bucket Cylinder
4- Head Light (Turn Signal Light/ Hazard Light/Clearance Light) (2 used)
5- Front Work Light (2 used)
6- Cab
7- Lift Arm Cylinder (2 used)
8- Lift Arm
9- Bucket Link
10- Hydraulic Oil Tank
11- Rear Combination Light (Turn Signal/Hazard Light/Clearance Light/Brake Light/Backup Light) (2 used)
12- Rear Work Light (2 used)
12 11 10
TNDF-01-02-001
TNDF-01-02-002
SECTION 1 GENERAL Group 2 Component Layout
T1-2-2
1 2 3 7 12 13 8 9
67TM7 Only
1- Bucket
2- Bell Crank (Lever) (2 used)
3- Bucket Cylinder (2 used)
7- Lift Arm Cylinder (2 used)
8- Lift Arm
9- Bucket Link (2 used)
12- Link (2 used)
13- Guide (2 used)
14- Quick Coupler Cylinder
15
15- Quick Coupler
14
TNDF-01-02-022
TNDF-01-02-021
SECTION 1 GENERAL Group 2 Component Layout
Main Component Layout (Hydraulic System)
T1-2-3
1- Ride Control Valve 2- Steering Valve 3- Pilot Valve 4- Auxiliary Pilot Valve (Option) 5- Priority Valve 6- Hydraulic Oil Tank 7- Air Cleaner 8- Exhaust Filter 9- Fan Motor 10- Oil Cooler 11- Radiator 12- Intercooler 13- Fuel Tank 14- Fan Valve 15- Coolant Reservoir 16- Engine 17- HST Pump 18- 4-Gear Pump Unit 19- Manifold Valve 20- Transmission Oil Filter 21- HST Charge Filter 22- Brake Charge Valve 23- Service Brake Accumulator 24- Secondary Steering Pump (Option) 25- Pilot Filter 26- Brake Valve 27- Control Valve 28- Ride Control Accumulator
1 2 3 4 5 6 7 8 9 12 28 27 26 25 24 22 21 20 19 18 17 16 15 14 13 10 11 23 TNDF-01-02-003
SECTION 1 GENERAL Group 2 Component Layout
T1-2-4
b a 29 30 67TM7 Only 29- Bucket Regenerative Selector Valve 30- Bucket Regenerative Valve
a- Front Side of Machine b- Front Frame
TNDF-01-02-023
SECTION 1 GENERAL Group 2 Component Layout
T1-2-5
1- Front Axle
2- Steering Cylinder
3- HST Motor 1
4- Transmission
5- Rear Propeller Shaft
6- Rear Axle
7- Steering Accumulator
8- HST Motor 2
9- Front Propeller Shaft
1 2 3 4 5 7 6 2 9 8 TNDF-01-02-010
Main Component Layout (Travel System)
Electrical System (Overview)
SECTION 1 GENERAL Group 2 Component Layout
T1-2-6
1- Horn
2- Lift Arm Proximity Switch, Lift Arm Angle Sensor (Option)
3- MAF
4- Air Cleaner Restriction Switch
5- Reverse Buzzer
6- Battery
7- Fuel Level Sensor
8- Battery Relay
9- Fusible Link (100A) (2 Used)
10- Fusible Link A (65A) / Fusible Link B (65A)
11- Glow Plug Relay
12- Starter Relay 1
13- Hydraulic Oil Level Switch
14- Hydraulic Oil Temperature Sensor
15- Bucket Proximity Switch
a- Electrical System (Cab) (Refer to T1-2-7)
b- Exhaust Filter (Refer to T1-215)
a b 1 2 3 4 6 7 8 9 10 11 12 13 14 15 5 6
TNDF-01-02-011
Electrical System (Cab)
SECTION 1 GENERAL Group 2 Component Layout
T1-2-7
1- Radio
2- Upper Switch Panel (Option)
3- Speaker
4- Rear Wiper Motor
5- Accelerator Pedal Sensor
6- Brake Angle Sensor
7- Brake Light Switch
8- Front Wiper Motor
9- Air Conditioner Controller 10- Front Wiper (1) Relay (WR1) 11- Front Wiper (2) Relay (WR2)
12- GSM (OPT) / GPS (OPT)
13- Flasher Relay
14- MC (Main Controller)
15- HST Controller
a- Components Related with Front Console (Refer to T1-2-8)
b- Components Related with Right Console (Refer to T1-2-9)
c- Rear Console (Refer to T1-2-11)
11 10 Detail D
Detail E
b c 3 2 1 9 8 D a 7 6 5 4 E 12 14 15 13
TNDB-01-02-032
TNDB-01-02-029
TNDF-05-04-002
SECTION 1 GENERAL Group 2 Component Layout
T1-2-8
8-
9-
10-
11-
14-
15-
16-
Switch 17- 1st
Limit Switch 18- Auto Idling Stop Switch (Not
19- Auxiliary 20- Auxiliary 21- Ash Tray 22- Cigar Lighter Front Console 1 2 3 4 5 6 7 8 1 9 10 MNDB-01-001 12 11 14 13 MNDB-01-002 15 16 21 22 17 18 19 20 MNDB-01-003
1- Air Conditioner Front Vent 2- Hazard Light Switch 3- Work Light Switch 4- Parking Brake Switch 5- Neutral Lever Lock (Forward / Reverse Lever) 6- Steering Wheel 7- Monitor Panel
Horn Switch
Accelerator Pedal
Brake / Declutch Pedal (Interlocked)
Front / Rear Wiper Switch 12- Forward / Reverse Lever / Shift Switch 13- Steering Column Tilt Pedal
Tilt, Telescopic Lever
Turn Signal Lever / Light Switch / Dimmer Switch
Key
Speed
Used)
Right Console
Multi-Function Joystick Type
SECTION 1 GENERAL Group 2 Component Layout
1- Forward / Reverse Switch (Option)
2- Multi-Function Joystick Lever
3- Auxiliary
4- Auxiliary
5- Auxiliary Control Lever (Option)
6- Control Lever Lock Switch
7- Creep Switch (Option)
8- Traction Control Switch
9- Power Mode Switch
10- Forward / Reverse Selector Switch (Option)
11- Fan Reverse Rotation Switch 12- Auxiliary 13- Auxiliary
14- Secondary Steering Operation Check Switch (Option)
15- Exhaust Filter Switch
16- Lift Arm Auto Lever Switch (Upward Set)
17- Lift Arm Auto Lever Switch (Downward Set)
18- Ride Control Switch
19- Armrest Adjust Handle
20- Armrest Adjustment
21- Auxiliary
22- Horn Switch (Under the Lever)
T1-2-9
21 22 1 2 3 4 5 6 8 7 9 10 11 12 13 14 15 16 17
18
19 20
MNDB-01-005 MNEC-01-044
Thank you very much for your reading. Please Click Here. Then Get COMPLETE MANUAL.NOWAITING
NOTE:
If there is no response to click on the link above, please download the PDF document first and then clickonit.
Fingertip Control Type
SECTION 1 GENERAL Group 2 Component Layout
fNOTE: * The location of control levers may be changed depending on the specification.
T1-2-10
Bucket Control Lever
* Lift Arm Control Lever
* Auxiliary Control Lever (Option)
Forward/Reverse Switch (Option)
Control Lever Lock Switch
Creep Switch (Option)
1- *
2-
3-
4-
5-
6-
Control Switch
Power Mode Switch
Forward/Reverse Selector Switch (Option)
Fan Reverse Rotation Switch
Auxiliary
7- Traction
8-
9-
10-
11-
12- Quick Coupler Switch (62/67Z7: Option, 67TM7: Standard)
(Option)
13- Secondary Steering Operation Check Switch
Switch
Auto Lever Switch (Upward Set)
14- Exhaust Filter
15- Lift Arm
Set)
16- Lift Arm Auto Lever Switch (Downward
Control Switch
17- Ride
Adjust Handle
Armrest Adjustment
Horn Switch 20 1 (3)* 2 (1)* 3 (2)* 4 5 6 8 7 9 10 11 12 13 14 15 16 17
18 MNDB-01-004 MNEC-01-042
18- Armrest
19-
20-
19
SECTION 1 GENERAL Group 2 Component Layout
T1-2-11
1- Fuse Box B 2- Fuse Box A 3- MPDr. Connector 4- Main Relay 5- Fuel Pump Relay 6- Back Buzzer Relay 7- Starter Cut Relay 8- Head Light Relay (Left) (A-R1) 9- Head Light Relay (Right) (A-R2)
Work Light (Front) Relay (A-R6)
Work Light (Rear) Relay (A-R7)
Right Turn Signal Light Relay (A-R8)
Horn Relay (A-R9)
10- High Beam Relay (A-R3) 11- Bucket Leveler Relay (A-R4) 12- Lift Arm Kickout Relay (A-R5) 13-
14-
15-
16-
Parking Brake Relay 1 (B-R1) 19- Parking Brake Relay 2 (B-R2) 20- Control Lever Lock Relay (B-R3) 21- Brake Light Relay (B-R4) 22- Load Dump Relay (B-R5) 23- Neutral Relay (B-R6)
Left Turn Signal Light Relay (B-R7) 25- Front Washer Relay (B-R8) 26- Rear Wiper Relay (B-R9) 27- Rear Washer Relay (B-R10) 28- Relay Box A 29- Relay Box B
17- Secondary Steering Relay (Option)(A-R10) 18-
24-
Console 11 10 9 8 1 3 28 4 5 6 7 29 2 12 17 22 27 16 21 26 15 20 25 14 19 24 13 18 23
Rear
TNED-01-02-009
SECTION 1 GENERAL Group 2 Component Layout
T1-2-12
Monitor Panel 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 20 21 22 23 24 25 26 27 28 29 30 31 32 33 19 34 35 36 37 38 39 40 MNDB-01-034 1- Left Turn Signal Light Indicator 2- High Beam Indicator 3- Work Light Indicator 4- Right Turn Signal Light Indicator 5- Exhaust Filter Warning Indicator 6- Exhaust Filter Regeneration Inhibit Indicator 7- Service Indicator 8- Maintenance Indicator 9- Parking Brake Indicator 10- Clearance Light Indicator 11- Control Lever Lock Indicator 12- (Unused) 13- Brake Oil Low Pressure Indicator 14- (Unused) 15- Secondary Steering Indicator (Option) 16- Low Steering Oil Pressure Indicator (Option) 17- Seat Belt Indicator 18- Discharge Warning Indicator 19- Fuel Gauge 20- Power Mode Indicator 21- Monitor Display Selection Switch 22- Exhaust Filter Regeneration Inhibit Indicator 23- Monitor Display Selection Switch (Up) 24- Preheat Indicator 25- Monitor Display Selection Switch (Down) 26- Forward/Reverse Selector Switch Indicator (Option) 27- Monitor Display 28- Fan Reverse Rotation Indicator 29- Engine Warning Indicator 30- Overheat Indicator 31- Coolant Temperature Gauge 32- Engine Oil Low Pressure Indicator 33- Air Filter Restriction Indicator 34- Fuel Filter Restriction Indicator 35- Water Separator Indicator (Option) 36- Hydraulic Oil Level Indicator 37- (Unused) 38- HST Warning Indicator 39- HST Oil Temperature Indicator 40- HST Oil Temperature Gauge
