Service Repair Manual Models 980M Wheel Loader
Shutdown SIS Previous Screen Product: WHEEL LOADER Model: 980M WHEEL LOADER XDJ Configuration: 980M Wheel Loader XDJ00001-UP (MACHINE) POWERED BY C13 Engine Disassembly and Assembly 980M T4 and 982M T4 Wheel Loader Power Train Media Number -M0075587-02 Publication Date -01/08/2012 Date Updated -17/07/2018 i06838048 Torque Converter - Disassemble - Lock Up Clutch With Freewheel Stator SMCS - 3101-015 Disassembly Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 439-3938 Link Bracket 3 B 8B-7548 Push-Puller 1 8B-7550 Leg 2 8H-0684 Ratchet Wrench 1 8B-7560 Step Plate 1 8H-0663 Bearing Puller Attachment 1 C 8B-7548 Push-Puller 1 8H-0684 Ratchet Wrench 1 8B-7549 Leg 2 5P-4808 Cap 2 8B-7554 Bearing Cup Puller Attachment 1 D 5F-7343 Bearing Puller Attachment 1 1P-0520 Driver Group 1 E 1P-0510 Driver Group 1
F 6L-7283 Forcing Bolt 3/8 - 16 by 3 in 7 G 417-1324 Adjust Stand 1 Start By: a. Separate the torque converter from the transmission and from the output transfer gears. Illustration 1 g02712129 1. Use Tooling (A) and a suitable lifting device to position the torque converter onto Tooling (G) and suitable blocking. The weight of the torque converter is approximately 260 kg (573 lb). Support the torque converter, as shown. 2. Remove bolts (1). Illustration 2 g02730506 3. Remove relief valve assembly (2A).
Illustration 3 g02711758 4. Use Tooling (F) to loosen housing assembly (2) from the torque converter. 5. Use the suitable lifting device and Tooling (A) to remove torque converter housing assembly (2). The weight of torque converter housing assembly (2) is approximately 144 kg (317 lb). Illustration 4 g00871317 6. Remove O-ring seal (3) from torque converter housing assembly (2). Illustration 5 g00871318
7. Remove bolts (4) from pump adapter (5) and torque converter housing assembly (2). Illustration 6 g00871264 8. Use Tooling (F) to remove pump adapter (5) from torque converter housing assembly (2). Illustration 7 g00871319 9. Use Tooling (B) to remove bearing cup (6). Remove bearing cup (6), O-ring seal (8), and shims (7) from pump adapter (5). See illustration 14 for Tooling (C). Illustration 8 g00871326 10. Remove pump drive gear (9) from torque converter housing assembly (2).
Illustration 13 g00871365 17.
Illustration 12 g01112903 16.
15.
14. Use Tooling (F) to push shaft assembly (14) out of torque converter housing assembly (2). Remove idler gear (13) from torque converter housing assembly (2). Remove O-ring seal (15) from shaft assembly (14). Remove bearing cone (16), bearing cone spacer (17), and bearing cone (18) from idler gear (13).
Illustration 14 g00871366 18. Use Tooling (C) to remove bearing cup (19) from idler gear (13). Remove bearing cup (19). Illustration 15 g00871367 19. Remove bearing cup spacer (20) from idler gear (13). Illustration 16 g00871368
20. Remove retaining ring (21) from idler gear (13). Illustration 17 g00871369 21. Use Tooling (C) to remove bearing cup (22) from idler gear (13). Remove bearing cup (22). Illustration 18 g00871370 22. Remove studs (23) from torque converter housing assembly (2).
Illustration 19 g02729366 23. Remove bolts (24) and gear (25). Illustration 20 g02735357 24. Use the driver group from Tooling (D) and a suitable press to remove race (25A) from gear (25). Illustration 21 g02730012 25. Use a suitable lifting device to reposition the torque converter, as shown. The weight of the torque converter is approximately 122 kg (269 lb). Remove bolts (26).
28. Remove bushing (31) from housing (27).
Illustration
Illustration
26. Use Tooling (F) to separate housing (27) from the torque converter. 23 g02730689
Illustration 22 g02730687
27. Use two people to remove housing (27). The weight of housing (27) is approximately 26 kg (57 lb). Remove housing (27), piston (28), and plate (30). Remove seals (29) from piston (28). 24 g02731059
29. Remove plate (32), disk (33), races (34), and bearing (35).
Note: Note the orientation of the bearing and races for assembly purposes.
Illustration 26 g02731644
Illustration 25 g02731623
30. Remove bolts (36), coupling assembly (37), and plate (38).
Illustration 27 g02731651 31. Use suitable blocking to support the bottom of shaft assembly (39). Remove retaining ring (40) and plate (41). Shaft assembly (39) can be lowered to the work bench. Illustration 28 g02731711 Illustration 29 g02732048
32. Install two of bolts (36) and remove turbine (42). 33. Remove bolts (36) and remove hub (43) from turbine (42). Illustration 30 g02731732 Illustration 31 g02731802 34. Remove race (44) and bearing (45). Note: Note the orientation of the race and bearing for assembly purposes. 35. Remove stator assembly (46).
Illustration 35 g02734776 40. Remove retaining ring (56) and hub (55). Illustration 36 g02735372 41. Remove seal ring (56). Illustration 37 g02734816 42. Use Tooling (D) and a suitable press to remove bearing (57). Illustration 38 g02735374
43. Remove retaining ring (59) and carrier assembly (58) from impeller (54). Illustration 39 g02735380 44. Remove bearing (60). Note: Note the orientation of the bearing (60) for assembly purposes. Illustration 40 g02735387 45. Remove bolts (61), hub (62), and adapter (63) from impeller (54).
Illustration 41 g02752296 46. Remove seals (64). Copyright 1993 - 2021 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Sun Mar 14 20:16:00 UTC+0800 2021
Shutdown SIS Previous Screen Product: WHEEL LOADER Model: 980M WHEEL LOADER XDJ Configuration: 980M Wheel Loader XDJ00001-UP (MACHINE) POWERED BY C13 Engine Disassembly and Assembly 980M T4 and 982M T4 Wheel Loader Power Train Media Number -M0075587-02 Publication Date -01/08/2012 Date Updated -17/07/2018 i06838485 Torque Converter - Assemble - Lock Up Clutch with Freewheel Stator SMCS - 3101-016 Assembly Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 439-3938 Link Bracket 3 G 8T-5096 Dial Indicator Test Group 1 5P-2390 Gauge Tool Group 1 H 1P-0520 Driver Group 1 JGuide Stud (3/8 - 16 by 8 in) 2 KGuide Stud (1/2 - 13 by 3 in) 3 L 2P-8312 Retaining Ring Pliers 1
Illustration 1 g02752296 1. Install seals (64). Illustration 2 g02735387 2. Install adapter (63), hub (62), and bolts (61) onto impeller (54). Tighten bolts (61) to a torque of 105 ± 14 N·m (77 ± 10 lb ft). Illustration 3 g02735380 3. Install bearing (60).
Illustration 4 g02735374 4. Install carrier assembly (58) and retaining ring (59) onto impeller (54). Illustration 5 g02744677 5. Raise the temperature of bearing (57). Install bearing (57) onto hub (55). 6. Install seal ring (56). Illustration 6 g02734776
Illustration 7 g02735333 7. Install hub (55) and retaining ring (56) onto impeller (54). Illustration 8 g02732255 8. Attach Tooling (A) and a suitable lifting device to impeller (54). The weight of impeller (54) is approximately 27 kg (60 lb). 9. Position impeller (54) onto shaft assembly (39). Illustration 9 g02731806 10. Install retaining ring (53) (not shown) and plate (52) onto stator (46).
11. Install freewheel cam (51), freewheel rollers (50), and springs (49). Note: Springs (49) must be installed with the maximum number or loops to the outside. 12. Install plate (48) and retaining ring (47). Illustration 10 g02731802 Illustration 11 g02731732 13. Install stator assembly (46). 14. Install bearing (45) and race (44).
Illustration 12 g02744699 Illustration 13 g02731651 15. Install hub (43) and turbine (42). 16. Use two of bolts (36) to align the holes. 17. Use suitable blocking to support the bottom of shaft assembly (39). Install plate (41) and retaining ring (40). Illustration 14 g02731644 18. Install plate (38), coupling assembly (37), and bolts (36). Tighten bolts (36) to a torque of 60 ± 7 N·m (44 ± 5 lb ft).
Illustration 15 g02731623 19. Install plate (32), disk (33), races (34), and bearing (35). Illustration 16 g02731059 20. Lower the temperature of bushing (31). Install bushing (31) into housing (27).
Illustration 17 g02730689 21. Install seals (29) onto piston (28). Install plate (30), piston (28), and housing (27). Illustration 18 g02730012 22. Install bolts (26). Tighten bolts (26) to a torque of 60 ± 7 N·m (44 ± 5 lb ft). Illustration 19 g02735357
g00872713
27. Install retaining ring (21) in the groove of idler gear (13). 23
Illustration 22
g00872711
Illustration
Illustration 24 g00872715
29. Flip idler gear (13) to the opposite side. Install bearing cup spacer (20) in idler gear (13). The notch in bearing cup spacer (20) must be aligned with retaining ring (21).
28. Use the proper equipment to handle bearing cup (22). Lower the temperature of bearing cup (22). Install bearing cup (22) in idler gear (13).
31. Install bearing cone (16), bearing cone spacer (17), and bearing cone (18) in idler gear (13). Apply clean hydraulic oil on O-ring seal (15). Install O-ring seal (15) on shaft assembly (14).
Illustration 27 g01112903 32.
Illustration 25 g00872716
Illustration 26 g00872718
30. Use the proper equipment to handle bearing cup (19). Lower the temperature of bearing cup (19). Install bearing cup (19) in idler gear (13).
Thank you very much for your reading. Please Click Here. Then Get COMPLETE IfNOTE:MANUAL.NOWAITINGthereisnoresponse to click on the link above, please download the PDF document first and then clickonit. GET MORE OTHER MANUALS https://www.aservicemanualpdf.com/ GET MORE OTHER MANUALS https://www.aservicemanualpdf.com/
33. Install Tooling (K) in shaft assembly (14).
Illustration
Illustration 28 g01112954
36. Install bolt (12) that holds shaft assembly (14) in place in torque converter housing assembly (2). Tighten bolt (12) to a torque of 120 ± 20 N·m (90 ± 15 lb ft).
35. Remove Tooling (K) from shaft assembly (14).
34. Hold idler gear (13) in position in torque converter housing assembly (2). Install shaft assembly (14).
Illustration 30 g00872724
29 g01112970
37. Use the proper equipment to handle bearing cones (10). Heat bearing cones to a maximum temperature of 135 °C (275 °F). Install bearing cone (10) on each side of pump drive gear (9).
Illustration 31 g00872801 38. Use the proper equipment to handle bearing cup (11). Lower the temperature of bearing cup (11). Install bearing cup (11) in torque converter housing assembly (2). Illustration 32 g00872727 39. Install pump drive gear (9) in torque converter housing assembly (2). Illustration 33 g00872729 40. Use the proper equipment to handle bearing cup (6). Lower the temperature of bearing cup (6).
Illustration 34 g00871319 41. Apply clean hydraulic oil on O-ring seal (8). 42. Install bearing cup (6), O-ring seal (8), and shims (7) on pump adapter (5). Illustration 35 g01112978 43. Install Tooling (J) in torque converter housing assembly (2). 44. Install pump adapter (5) on torque converter housing assembly (2). Illustration 36 g01112982
