01
Korona Kit NSN: 1385-99-979-8746 Understanding the threat, ADVANCING the response.
T: +44 (0) 1989 568 350 F: +44 (0) 1989 568 351 info@kirintec.com www.kirintec.com
KORONA KIT Silent operation non-explosive command wire cutter Kirintec’s non-explosive command wire cutter is easy to use. Operationally the Korona kit is used silently allowing effective tactics to be deployed.
Safety notes • A safe stand-off distance should always be observed when using the Korona • C ommand wires should never be cut by hand • C utting a wire may initiate a device in close proximity to the intended cut point.
The Korona is supplied with an operating manual, but essentially there are five easy steps to follow: 1 Wire cutter spring is wound to its maximum and the trigger safety is applied 2 P lace the cutter near to command wire, bracing its position with tethered lines 3 T he trigger line is attached with a snap hook or karabiner 4 Ease the wire into the open cutting slot and trap it in place with the sprung cover 5 Release the safety catch, retreat to a stand-off position and pull line to fire ceramic blades
Part No
Description
NSN
KT-600-300
KORONA non-explosive command wire
1385-99-979-8746