IMPLEMENTATION CHECKLIST
Guide your Highlight® implementation to success.
Pre-Training Steps
▢ Watch the Highlight for Wipes Training Video
▢ Review Highlight Training Powerpoint Slides
▢ Practice use of Highlight for Wipes with your Kinnos representative Training Steps (with staff)
▢ Present Highlight Training Powerpoint Slides
▢ Review the Highlight for Wipes Training Video (part of the slide presentation)
▢ Demonstrate assembly of Highlight Lid and Cartridge with your wipes product
▢ Demonstrate feeding-out of wipes and folding technique for even color
▢ Demonstrate use of Highlight, preferably in typical use settings (Ex: patient room, operating room, etc.)
▢ Explain that they should wipe until color is evenly spread
▢ Emphasize even pressure on the wipe spreads product and Highlight evenly
▢ Explain color fades in 3 to 5 minutes but can be allowed to fade without observation required - keep the process efficient
▢ Explain that the Lid retracts wipes after 5 minutes of inactivity
▢ Review reasons for potential residue
▢ Product expired / wrong product (No color fade)
▢ Tape residue or other contamination is still on surface (Ex: small crevices need further cleaning)
▢ Wipe technique spreads product unevenly (leaving splotches of color)
▢ Explain residue can be removed with blank wipe
▢ Explain the importance of a 30-second spot check at end of room clean
▢ Emphasize efficiencies: use the wipe folded, allow color to fade, spot check at end of room cleaning with blank wipe
Post-Training Steps (with staff)
▢ Spot-check rooms with staff, coach on residue prevention if needed
▢ Offer wiping technique training video
▢ Educate nursing staff on units where Highlight is used to encourage their support for implementation
