September 11 hardened steel bushes

CONTENTS Case Hardened Bushes - Precision Ground Hardened Steel Bushings TERMS AND CONDITIONS OF SUPPLY.......... Page 2, 5 Drawings & “Dial-a-Bush” Key to Part Numbers ........ 3, 4

Bushes to suit 90mm Dia Pins ...................Page 28

Bushes to suit 0.75” to 2” Diameter Pins .................5 - 15

Bushes to suit 95mm to 120mm Dia Pins ......29 - 32

Bushes to suit 55mm to 70mm Diameter Pins .......16 - 22

Bushes to suit 125mm to 200mm Dia Pins ........... 33

Bushes to suit 71mm to 3” Diameter Pins ..............23 - 24

Seals - Pin Wipers - Shim Kits - Spacers ...... 34 - 36

Bushes to suit 80mm to 3.5” Diameter Pins ...........25 - 27

Bronze Bearings - Caterpillar Bearings .......... 37 - 38

Pin Steel - Super Pins - 4140 Precision Ground - Induction Hardened .39 Steel Round Bar, Induction Hardened - K1045 - Convenient lengths ............... 40 Induction Case Hardened Steel Pins - Bucket Pins Schematic Drawings & Key to KSet Part Numbers ........................................................................................41 - 42 3/4” Diameter to 2.25” Diameter - Hardened Pins ..................................................................................................43 - 46 60mm Diameter to 90 mm Diameter - Hardened Pins - ............................................................................................47 - 50 95 mm Diameter to 115 mm Diameter - Hardened Pins - ........................................................................................51 - 52 120mm, 125 mm, 5”, 130 mm, 140 mm to 160 mm Diameter - Hardened Pins - .............................................................53

Weld-on End Plates, Pin Tags for Excavator Bucket Pins ..................................................................54 - 57

Aftermarket Pins and Bushings - To Suit: Case Part Numbers Referenced to KSet Part Numbers ...................................................................................................58 Case 580SK Back Hoe Loaders - Case SLE Back Hoe Loaders ...............................................................................59 - 60 Caterpillar Wheel Loaders 950, 966, 980 - Cat Compact Loader CL110 - LHD CL110 Pins...............................................61 Caterpillar D10 Ripper Frame & D11 Ripper Frame ..........................................................................................................62 Eimco 130 LHD - Eimco ED7 LHD - Eimco ED10 LHD - Eimco 912 LHD - Eimco 913 LHD ....................................63 - 64 Hitachi Excavators ZX200, EX450, ZX 450, EX520, ZX520 ..................................................................................... 65 John Deere Backhoe Pins and Bushings - John Deere Scraper Wear Rails - John Deere Grader Parts ........................66 Kato, Kubota, IHI Bucket ends, Kobelco SK045 - SK060, Yanmar VIO 50 ..............................................................67 - 68 Kobelco Excavators - SK135SR-3, SK220, SK250, SK260, SK330 ........................................................................ 69 Komatsu Mini Excavators - PC45 - PC60 - PC75UU .................................................................................................... 70 Komatsu Excavators - PC120 - PC150 - PC128US - PC138US ...................................................................................... 71 Komatsu PC200 - Pins Bushings - PC228U - Komatsu PC220 - Pins Bushings - PC250 ................................................72 - 73 Komatsu PC300 Pins Bushings - PC350 - Komatsu PC400 Pins Bushings - PC450 ..........................................................74 - 75 Komatsu PC600 Bucket Pins Bushings - Komatsu PC800 Bucket Pins Bushings - Komatsu PC1250 Bucket Pins Bushings - ..................76 Komatsu WA320 Pins Bushings - WA350 - WA380 - WA420 - WA450 - Komatsu WA470 Pins Bushings - ...........................77 Komatsu WA480 Pins & Bushings - Komatsu WA500 Pins & Bushings - Komatsu WA600 Pins & Bushings - ....................................78 Komatsu Part Number to KSet Part Number Cross-Reference List - .......................................................................... 79 -80 Kubota Excavators - KX161-3 - Kubota KX045 ................................................................................................................ 81 Sandvik Tamrok Drills TB40, TB60 Atlas Copco Drills H12, H322 Simba ................................................................................82 Volvo EC330 Pins & Bushings - Volvo EC460 Pins & Bushings - Volvo EC480D Pins & Bushings - ...................................................... 83

Tools and Accessories

Alpha High Speed Drills & Taps ................................................................................................................................. 84 SANDVIK Coromant - Ceramic Inserts - Whisker Reinforced - Hard Part Turning Tips - .................................................85 Sterling - Tools & Measuring - Sterling - Knives & Cutters ............................................................................... 86 - 87 FUCHS Extreme Bearing Grease...RENOLIT XTB2 - Lubemate Grease Guns ...................................................... 88 - 89 KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

Newcastle - Sydney Region Office - AustraliaCopy $150 Min Order

Page 1 September 2015

SALES - Items from CATALOGUE Ph 02 4928 5700

THE LARGEST RANGE OF HARDENED & GROUND STEEL BUSHINGS IN THE COUNTRY - EX STOCK INDUCTION-HARDENED PINS AND PIN STEEL “PROMPT DISPATCH OF GOODS EX STOCK IN EXCHANGE FOR PROMPT PAYMENT”

TERMS AND CONDITIONS OF SALE:

COUNTER SALES: By APPOINTMENT ONLY Between 8:30am-2:30pm KSet Engineering Pty Ltd is a Manufacturing Wholesaler, Not a Retail Shop RESTOCKING FEE: 16% or $50 Minimum No credit is given for goods returned after 14 days from invoice or without KSet Management consent, nor for goods that have been fitted Re-Wrapping charges apply if not in original wrapped condition.

7 DAY ACCOUNTS May be extended to customers who have traded satisfactorily, with a Credit Limit at our discretion. Non-Supply is also at our discretion should trading exceed 21 days DISTRIBUTOR ACCOUNTS: 30 DAYS EOM Trading must exceed $20,000 p.a. and a minimum of 2 invoices per month. Credit limit at our discretion Trading automatically suspended if account is outstanding 32 days from end of month following invoice

NET PAYMENT WITH ORDER. GOODS WILL NOT BE DISPATCHED BEFORE PAYMENT IS RECEIVED

PAYMENTS: Cheques: To approved customers only. Cash: Correct amount only

MasterCard and Visa Cards accepted. No Transaction Fee is charged on sales under $1,000

Electronic Transfers to: KSet Engineering Pty Ltd BSB: 06 2813 Account No.: 1038 8155 The Purchaser agrees that no warranty is implied or given and to hold KSet Engineering unaccountable for any loss or damage

occuring due to faulty parts or materials.TITLE does not pass to purchaser until Payment has been received in FULL.

Minimum Product Order $150 plus GST

ENGINEERING - Custom Products Ph 02 4928 5700

Minimum Custom Order $240 plus GST INDUCTION HARDENED PINS - From SAME DAY service where hardened bar stock is used SPECIAL HARDENED BUSHINGS - From SAME DAY service where we are able to modify stock items to around 10 working days for new items TERMS AND CONDITIONS OF SALE - ALL CUSTOMERS We submit a written quote in answer to your enquiry. We require 50% deposit received by bank Written order before commencement, and 50% balance before dispatch Orders under $1,800: Full payment with order

FREIGHT All goods are carried by KSet Engineering preferred major freight companies at competitive prices

Freight, Plus Packing, Handling, Insurance are included on invoice as two separate items.

F Codes for Freight Plus P Codes for Packing, Handling, Insurance:

F3 3kg Airbag $17 PB1 Airbag

F5 5kg Airbag $28 PB2 2 Bags

FB Fastways Blue Label Newcastle $9 PC1 HD Carton

FL Lime label Sydney Region $13 PC2 2 HD Cartons

FNT Northern Territory / Remote Surcharge $21 PSK Small skid

FR Road Freight via Star Track POA PMS Medium skid

FWA Remote WA Surcharge $21 PPT Pallet

PFastC1 1 Carton Fastways Freight Forward

ONFORWARDING:

FM Manual Consignment Charge $10 Plus The same Packing, Handling item is applied When goods are sent “freight on”, they are NOT INSURED, and purchaser assumes ALL RISK.

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

$12 $17 $14 $22 $22 $26 $37 $13

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 2 September 2015

Configuration Index - BUSHES

Dimension Index

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 3 September 2015

KEY to KSet Part Numbers - BUSHES

KSet Bush Part Numbers are based on an Identification System using Metric Size Approximation

Bushes are Designated O.D. by I.D. by Length

EXAMPLE, ON PAGE 14:

B64F51-32

“F” DENOTES A FLANGE AT ONE END

TOLERANCES:

OUTSIDE DIAMETERS ARE GENERALLY PRECISION GROUND TO + / - 0.01mm OF DIAMETER SHOWN IN “OUTSIDE” COLUMN. INSIDE DIAMETERS ARE GENERALLY PRECISION GROUND TO + / - 0.013mm OF DIAMETER SHOWN IN “INSIDE” COLUMN. IN CASE OF VARIATION, PLEASE DISCUSS ACHIEVED DIAMETERS AT TIME OF ORDERING

HARDNESS:

AVERAGE CASE HARDNESS IS 60 ROCKWELL C. CORE HARDNESS 30 to 40 ROCKWELL C.

MATERIAL:

C 0.19% Si 0.30% Mn 1.5% V 0.12% S 0.03% TENSILE STRENGTH 635 MPa YIELD STRENGTH 420MPa

AVERAGE DEPTH: 0.9mm P 0.03% TYPICAL ELONGATION 18% TYPICAL

Search: “Dial-a-Bush” - Find Bush by Size - “Dial-a-Bushing” - Find Bushing by Size - “Dial a Hardened Bush” - Find Hardened Bush by Size - “Dial a Steel Bush” - Find Imperial Bushing

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 4 September 2015

Bushings - Hardened Steel - Precision Ground

Suit 0.75” to 1” Diameter Shaft Stock, Usage, Mfr, 30-06-14 $

KSet Part No. Price Outside

EX GST

B26-19-20 B26-19-24 B25-19G29 B26-19-32 B25-19G38

$ 20 $ 20 $ 14 $ 22 $ 16

B26-19-48 B29-19-51 B32-19-32 B29-20-38 B30-20-36 B29-22-20 B29-22-24 B32-22-26 B33-23-25 B34-24-25

Inside

Length

Manufacture Notes Locations 24-08-2015

8,550

$ 7,467

0.79” .10 kg Goldfields Plain Bush A 83 68pa 6 McCulloch DISCLAIMER 0.94” .10 kg Tesk 2006 Plain Bush C 103 10pa 6 KSET Aftermarket 1.13” for John Deere Bush T42803 Z 74 2pa pins 6 and JD410bushes INT fg 5W GRV are sold on their 1.25” .06 kg Tesk 2013 Plain Bush C 21 7pa own 6 Reputation 82 in 2014 1.50” for John Deere Bushing T42806 C 55 to specifications 2pa 4 discussed 22in2013 JD410 at point of sale or in this catalogue $ 26 1.001” 0.754” 1.88” .08 kg John Deere Bushing U12271 B 6+118 J50514 72pa 8 Was B25-19-48 ORIG = 1.000” It is the Purchaser’s $ 26 1.126” 0.756” 2.00” $ REDUCED $ Plain Bush C 29 8pa 12 responsibility parts $ 20 1.252” 0.758” 1.25” Tesk 2009 Plain Bush C 7 to measure the 2pa 4 before fitting to ensure $ 34 29.10mm 20.20mm 3.0mm Tesk 2015 Plain Bush C 6 to machine, 30pa 6 correct 30 in one lot H.E.M.E and Clearance Fit NS Eng $ 34 30.06mm 20.02mm 36.0mm Tesk 2013 Plain Bush C 9 Interference 16pa 6 N25in2013 KSet accepts no responsibility for pin to bush16pa clearance fitting Dec09 $ 16 1.127” 0.880” 0.79” .04 kg $ REDUCED $ Plain Bush B 151 4 after 50 McCullochs $ 20 1.127” 0.880” 0.94” $ REDUCED $ Plain Bush D 42 6pa 4 Sold 108 in Jly/Aug 2009 is given implied as $ 24 1.253” 0.877” 25.4mm .09 kg 4 Only To clear D 4 No Warranty 0pa 4 or New in catalogue 2012 $ 27 1.269” 0.879” 25.1mm .09 kg Case 580K Steering C 32 to Wear Life 0pa 4 or Breakability of D127507 $ 24 34.10mm 24.10mm 25.0mm .09 kg 4 Only To clear C 4 Launchbury’s Inv 19619 Shaft,12pa Pins or4 Bushes 1.002” 1.002” 0.995” 1.002” 0.995”

0.755” 0.755” 0.754” 0.755” 0.754”

Suit 25mm Diameter Shaft: B33-25G30 B33-25G35

$ 28 33.08mm 25.10mm 30.0mm .08 kg 68721-66630 $ 20 33.08mm 25.10mm 35.0mm .08 kg Suit Yanmar

B35-25-22 B35-25-27 B35-25-30 B35-25X30 B35G25G31 B35-25-33

$ 23 $ 28 $ 18 $ 23 $ 24 $ 18

35.02mm 35.03mm 35.03mm 35.12mm 35.08mm 35.02mm

25.11mm 25.19mm 25.12mm 25.14mm 25.15mm 25.19mm

21.8mm 27.0mm 30.0mm 29.8mm .08 kg 31.0mm for 33.0mm

Tesk 2008 Plain Bush B 28+44 J50610 For IHI 404 324 502 C 43 $ REDUCED $ Plain Bush C 63 00024-00024 O/B F8 C 39 John Deere Bushing R81854 C 47 For IHI 404 324 501 C 59

34pa 23pa 31pa 5pa 6pa 14pa

B35-25G34 B35-25X35 B35-25-40 B35G25G40 B35G25G45

$ 20 $ 30 $ 22 $ 22 $ 28

35.10mm 35.09mm 35.03mm 35.08mm 35.08mm

25.15mm 25.14mm 25.12mm 25.14mm 25.14mm

33.8mm 34.8mm 40.0mm 40.0mm .15 kg 45.0mm for

00021-00026 Int.Groove D 32 00024-00064 O/B F8 C 20 Darwin Plain Bearings D 3 TESK 2010 Greasable D 10 John Deere Bushing R72700 C 13

0pa 5 15pa 8 12pa 6 12pa 8pa 10

B36-25-33 B38G25G39 B52-25-26

$ 26 36.05mm 25.12mm 33.0mm $ 28 38.03mm 25.19mm 39.0mm $ 18 52.00mm 25.08mm 25.4mm

O.S. TESK Plain Bush D 32 For IHI 075 233 321 D 31 Bucket Boss Plain Z 10

0pa 1pa 6 0pa

Int.Groove A 33+40 J50702 51pa 4 Int.Groove D 70 3pa 8

Bushes for 1inch Diameter Shaft: for .05 kg .06 kg .06 kg

For Case Tesk 2003 Tesk 2004 Heavy Press

5 6 6 8 5 6

1 Tonne Yanmar

310 C Made 101 in Nov 2005

12 in 1 Lot 310C Gosf$3.60

DRILLS - TAPS - DIES - BURRS 58pa 5 See Page 94pa 6 73 322pa 4

G35361 A 157 Plain Bush A 241 Plain Bush A 288 Close Fit A 434

B32-26-16 B32-26-20 B32-26-26 B33-26-26

$ 18 $ 20 $ 20 $ 24

1.250” 1.251” 1.251” 1.254”

1.006” 1.006” 1.006” 1.003”

0.63” 0.75” 1.00” 1.00”

B32-26-32 B32-26-38 B32-26-45 B32F26-45 B32-26-51

$ 25 $ 26 $ 28 $ 36 $ 29

1.251” 1.251” 1.251” 1.251” 1.251”

1.006” 1.006” 1.008” 1.004” 1.008”

1.25” .07 kg 1.50” .09 kg 1.75” for 1.79” .12 kg 2.00”

Tesk 2005 Plain Tesk 2005 Plain Massey Ferguson Flange Bush MCC Tesk 2005 Plain

B35-26-26 B35-26-32 B35-26-38 B35G26G38 B35-26-51

$ 27 1.377” 1.005” $ 27 1.377” 1.005” $ 32 1.377” 1.007” $ 32 35.07mm 1.007” $ 34 1.377” 1.007”

Bush A 43+150 J50610 100pa 6 Bush B 58 41pa 8 BUSHINGS Plain C 44 18pa 9 M8038 2014 C Quantity 52 16pa Available 11 Discounts onlyJN41008 upon Bush Crequest 19 provided6pa 9 all outstanding invoices are settled within 7 Days 1.00” .09 kg Darwin LNG Plain Bush A 152 17pa 7 1.25” .12 kg Tesk 2005 Plain Bush CDiscount 31 for 10 or more 4pa of any 8 line item $ 3.00 ea 20 or 59pa more of any 1.50” Tesk 2004 Plain Bush CDiscount 18+100for J50610 8 line item $ 4.00 ea more of any 38.0mm for John Deere Bushing R99444 CDiscount 13 for 30 or 20pa 9 line item $ 5.00 ea 2.00” Tesk 2015 Plain Bush NDiscount 20 for 40 or more of any line item $ 6.00 ea

B36-26-25 B38-26-26 B38-26-38 B38G26G50 B38-26-51

$ 18 $ 28 $ 28 $ 41 $ 24

1.00” for 1.00” . 07 kg 1.50” 1.97” . 24 kg 2.00”

John Deere Bushing U10482 Z 11 0pa $ $ REDUCED $ $ Plain B 126 61pa 7 $ $ REDUCED $ $ Plain C 47 26pa 7 Bushes Tesk 2007 Greasable B 40 Pins and 17pa 11

$ $ REDUCED $ $ Plain C 29 Shims 15pa 8 Seals Chess Eng and

B40-26-50 B41-26-19

$ 28 40.05mm 1.004” $ 18 1.625” 1.000”

Dimensions shown are for the KSet Bush, not for nearby OEM numbers

1.395” 1.502” 1.502” 1.502” 1.502”

1.012” 1.002” 1.007” 1.004” 1.002”

1.97” 0.75”

216pa 5

280 in box

$ $ REDUCED $ $ Global Marine

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

Plain D 22 Plain Z 19

Tools8pa and11Cutters

0pa

Minimum Product Order $150 Discount for 10 or more of any line item $ 3.00 ea Discountsubject for 20 or of any line itemnotice $ 4.00 ea Prices tomore change without Discount for 30 or more of any line item $ 5.00 ea Discount for 40 or more of any line item $ 6.00 ea

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 5 September 2015

Case Hardened Bushes - Precision Ground Suit 28mm to 1.25” Diameter Shaft Stock, Usage, Mfr, 30-06-14 $

KSet Part No. Price Outside

Inside

Length

EX GST

B36-28-26 B36-28-30 B36G28G39

$ 18 ! 36.04mm 28.02mm 25.4mm $ 20 36.04mm 28.02mm 30.0mm $ 20 36.04mm 28.02mm 39.5mm

B35-29-29 B35-29-32 B35-29-38 B35G29G50 B37-29-26

$ 26 $ 26 $ 26 $ 20 ! $ 15 !

1.376” 1.385” 1.376” 1.376” 1.440”

1.130” 1.128” 1.129” 1.131” 1.129”

1.13” .047 kg 1.32” 1.50” .062 kg 1.96” 1.00”

B38-29-16 B38-29-25 B38-29-35 B41-29-26

$ 22 $ 22 $ 22 $ 16 !

1.516” 1.504” 1.502” 1.627”

1.128” 1.132” 1.132” 1.129”

0.62” .08 kg 1.00” .10 kg 1.37” 1.00”

.08 kg .10 kg .12 kg

Manufacture Notes

Locations

09-09-2015

9,991

$ 9,295

Sandvik TB40 2088 8408 C 97 44pa 6 40 July,20 June to Giles Eng Tesk 2004 Plain Bush C 5.0 56 mm Jobber 70pa Drill 6 Bit $404.00 in 1 lot eaPopey

Sandvik TB60 TB40 59943148 A CodeTL-C9LM050 449 134pa 8.50 TB40, TB60 Sandvik Drill plus GST Tesk 2001 Plain Bush Tesk 2012 Plain Bush Tesk 2012 Plain Bush $ REDUCED $ Greasable $ REDUCED $ 9 only Plain

C 7+40 J50610 24pa 8 of Six $16.00 C Pack 4 +36 J50610 8pa 8 C Code: 31 TL6-C9LM050 4pa 9 D 48 10pa 9 Z 9 0pa

Tesk 2012 Plain Tesk 2004 Plain Tesk 2004 Plain $ REDUCED $ 4 only

C 37 C 32 C 10 Z 4

Bush Bush Bush Plain

4pa 7 12pa 7 4pa 7 0pa

McCullochs, Twine

Timack

To Discontinue sold 37 in one lot

To Discontinue

Suit 30mm Diameter Shaft B35-30-30 B35-30-40 B35G30G40 B35G30G45 B36-30-30

$ 24 $ 26 $ 26 $ 28 $ 20

35.05mm 35.05mm 35.05mm 35.05mm 36.05mm

30.12mm 30.12mm 30.12mm 30.12mm 30.12mm

30.0mm .064 kg 40.0mm .085 kg 40.0mm .08 kg 45.0mm .08 kg 30.0mm

Toyota SDK8 6802217 Bobcat320-Bush-F,I,J Bobcat Dakin Bucket Bobcat S330 Bushing Tesk 2004 Plain Bush

A 45 31pa 7.50 A 73 13pa 8.50 68 in 2014Excavator C 20 4pa 9 4 in 2014 C 13+36 J50610 19pa 10 D 23 0pa To Discontinue

B36-30-40 B38-30-20 B38-30-25 B38-30G30 B38G30G30

$ 20 $ 22 $ 20 $ 22 $ 24

36.49mm 38.05mm 38.06mm 38.05mm 38.05mm

30.10mm 30.10mm 30.09mm 30.10mm 30.10mm

40.0mm .10kg 20.0mm .07 kg 25.0mm .09 kg 30.0mm .10 kg 30.0mm

Tesk 2009 Tesk 2004 Tesk 2011 Kubota Tesk 2008

C 16 8pa 7 A 46 48pa 6 A -1+40 J50703 52pa 7 A 115 79pa 7.50 B 71 60pa 8

Plain Bush Plain Bush Plain Bush 68721-66770 Greasable

Kubota 68721-66522 B 63 24pa 8 Tesk 2007 Greasable A 53 48pa 8 JCB 231/02904 C 22 8pa 7 Tesk 2012 Greasable C 39 6pa 7 Takeuchi TB015 00021-30022 A 41 14pa 7 5W INT. 6.0 mm Jobber Drill Bit $ 5.00 ea plusJ50512b GST B40-30-30 $ 27 40.08mm 30.11mm 30.0mm .13 kg Tesk 2011 Plain Bush CCodeTL-C9LM060 35 35pa 7.50 B40-30G30 $ 28 40.07mm 30.12mm 30.0mm .13 kg Type U Bush A 106 57pa 7 $23.00 B40G30G30 $ 28 40.07mm 30.12mm 30.0mm .125 kg IHI Mini Excacator 404 325 202 APack 115 of Six 33pa 7.50 00021-00010 - Dig Code: TL6-C9LM060 B40-30-33 $ 16 ! 40.05mm 30.17mm 33.0mm $ REDUCED $ IHI 4 04 331 000 D 187 20pa 7 To Discontinue B40G30G35 $ 31 40.05mm 30.12mm 35.0mm .135 kg Bobcat320 Greasable A 30+60 J50703 82pa 8 92 in 13 months 6539270 = B40-30g39.7 B40G30G40 $ 32 40.05mm 30.11mm 39.7mm .17 kg 6539270 Furukawa 311541-21130 A 129 133pa 8.50 332541-21240, 1900-09920 B40-30x40 $ 29 40.10mm 30.13mm 40.0mm IHI Mini Excacator 404 331 000 C 50 18pa 10 FIG8 5Wx1 Blind One End B40G30G45 $ 28 40.05mm 30.12mm 45.0mm .18 kg TESK 2005 Greasable C 113 56pa 9.50 68 in 14 months B40-30-46 $ 26 40.05mm 30.11mm 46.0mm .20 kg IHI Mini Excacator 404 324 600 C 83 12pa 9 BUSHINGS B40-30-50 $ 32 40.05mm 30.12mm 50.0mm .22 kg Tesk 2011 Plain Bush C 22 6pa 11 Quantity Discounts Available only upon request provided all outstanding invoices B42G30G40 $ 33 42.05mm 30.11mm 39.7mm .15 kg O.S. Tesk 2010 C 12 4pa 8 are settled B44G30G30 $ 26 ! 44.45mm 30.15mm 30.0mm $ REDUCED $ 5 Only Greasable Z 7 2pa within 8 7 Days To Discontinue more of any line To itemDiscontinue $ 3.00 ea B47G30G31 $ 25 ! 47.50 mm 30.23mm 30.0 mm $ REDUCED $ 23 Only Greasable Z Discount 19 for 10 or0pa B38-30-35 B38G30G35 B38G30-36 B40G30G20 B40-30G22

$ 26 $ 27 $ 22 $ 28 $ 27

38.05mm 38.05mm 38.02mm 40.08mm 40.09mm

30.10mm 30.11mm 30.11mm 30.12mm 30.14mm

35.0mm .12 kg 35.0mm 35.6mm .12 kg 20.0mm .10 kg 22.0mm .10 kg

Discount for 20 or more of any line item $ 4.00 ea Discount for 30 or more of any line item $ 5.00 ea Discount for 40 or more of any line item $ 6.00 ea

Bushes to Suit 1.25” Diameter Shaft B38-32-18 B38-32-22 B38G32G25 B38-32-27 B38-32-32

$ 22 $ 18 $ 29 $ 28 $ 28

1.502” 1.501” 1.502” 1.501” 1.502”

1.257” 1.256” 1.252” 1.258” 1.256”

0.70” 0.88” 1.00” 1.06” 1.25”

.05 kg .08 kg .07 kg .07 kg .09 kg

Case Lift Cyl 30634 Massey Ferguson Plain Tesk 2005 Greasable Massey Ferguson Plain Tesk 2000 Plain

B38-32-37 B38G32G38 B38G32G44 B38G32G50 B38G32G63

$ 29 $ 31 $ 34 $ 40 $ 46

1.502” 1.502” 1.501” 1.501” 1.502”

1.256” 1.253” 1.256” 1.258” 1.258”

1.50” 1.50” 1.74” 1.96” 2.50”

.11 kg .10 kg .12 kg .14 kg .18 kg

Tesk Tesk Tesk Tesk Tesk

2000 2005 2009 2000 2012

Plain Greasable Greasable Greasable Greasable

Dimensions shown are for the KSet Bush, not for nearby OEM numbers KSet Engineers design bushes to suit market requirements Example: A neater fit to shafts and pins.

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

C 46 32pa 7 580K FRONT BKT? 2005 Overnight Delivery Darwin Bearings Bushes C 65

6pa 8 B 32 18pa 7 A 8+90 J50703 88pa 7 A 93+60 112pa 7 J50703

A 39 Bushes 27pa and 8 Pins A 39 18pa 9 and C 43 Seals 14pa 10 Shims B 48 46pa and 11 Tools Cutters A 62 9pa 13

M8014

Minimum Product Order $150 Prices subject to change without notice Discount for 10 or more of any line item $ 3.00 ea Discount for 20 or more of any line item $ 4.00 ea Discount for 30 or more of any line item $ 5.00 ea Discount for 40 or more of any line item $ 6.00 ea

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 6 September 2015

Case Hardened Bushes - Precision Ground

Suit 1.25” to 1.5” Diameter Shaft Stock, Usage, Mfr, 30-06-14 $

KSet Part No. Price Outside

Inside

Length

EX GST

B40-32-26 B40-32-32 B40-32-40 B40-32-50 B40-32G50 B40G32G50

$ 27 $ 27 $ 29 $ 34 $ 34 $ 34

40.03mm 40.03mm 40.03mm 40.03mm 40.01mm 40.02mm

1.251” 1.254” 1.254” 1.254” 1.260” 1.258”

0.99” 1.25” 1.58” 1.97” 1.95” 1.97”

.09 kg .11 kg .15 kg .18 kg .18 kg .18 kg

B42-32-12 B42-32-32 B42-32-38 B42-32-48 B42G32G51 B44-32-32 B44-32-51

$ 24 $ 28 $ 32 $ 40 $ 42 $ 32 $ 37

1.6275” 1.627” 1.627” 1.627” 1.627” 1.752” 1.752”

1.253” 1.255” 1.255” 1.256” 1.256” 1.256” 1.257”

0.47” 1.25” 1.50” 1.87” 2.00” 1.25” 2.00”

.05 kg .13 kg .16 kg .20 kg .20 kg .19 kg .30 kg

Manufacture Notes

Locations 09-09-2015

10,004

$ 6,890

JOY B40-31-25 01758059-0061 B 32 28pa 7 .09 kg JOY :1.2495TO 1.2505 TESK 2009 Plain Bush C 48 mm Cobalt 22pa Jobber 8 5.0 Drill Bit Attachment Plain Bush A 52 TINK’s Carded 26pa 9 $ 7.00 ea Cat247B Skid Steer Loader C 21 14pa 11 plus GST CodeTL-9LM050Co Bobcat Caterpillar 159-5756 C 32 10pa 11 110 in 16mnths Bobcat Attach Cat247B Greasable C 20 8pa 11 New 2014 Pack of Six $32.00 Extra Hard Bush 64 HRC D 24 0pa 145 to Bohle Hyd JN0214 Code: For Case 580 D33827 A 117 81pa 11 TL6-9LM050Co Toolmaker Bushing Plain B 36 18pa 8 TESK 2004 Roller Bush C 28 6pa 9 TESK 2012 Greasable C 11 5pa 10 TESK 2009 Plain Bush A 27 19pa 8 TESK 2006 Plain Bush B 41 24pa 9

B44G32G51 $ 41 1.752” 1.256” 2.00” .30 kg TESK 2008 Greasable A 28 24pa 11 B44-32G76 $ 44 ! 1.751” 1.256” 3.00” .45 kg $ REDUCED $ Imperial Bush B 50 3pa 12 B51-32-26 $ 30 ! 2.002” 1.259” 1.00” .24 kg $ REDUCED $ Heavy Wall B 59 0pa 10 B51-32-51 $ 46 2.001” 1.258” 2.00” .49 kg TESK Heavy Wall Bush C 26 11pa 10 B55G32G66 $ 39 ! 55.07mm 1.259” 66.0mm John Deere R81853 C 16 0pa 12 B45-33-44 $ 40 44.90mm 32.80mm 44.0mm .26 kg Special Bushing 2013 B 34 78pa 10 30+48 toPurcells B46-34-32 $ 20 45.53mm 34.15mm 32.0mm .26 kg For 34 Diameter Pin Chain Bush Z 31 0pa 10 B45-33-45 +40 Purcells 45.00 x 33.00 x44.00

Bushes for 35mm Diameter Shaft: .06 kg .07 kg .07 kg .12 kg .12 kg

B40-35-25 B40-35-30 B40-36-30 B40-35-50 B40G35G50

$ 29 $ 20 $ 15 ! $ 30 $ 32

40.05mm 40.03mm 40.03mm 40.01mm 40.01mm

35.10mm 35.10mm 35.36mm 35.11mm 35.11mm

25.0mm 30.0mm 30.0mm 50.0mm 50.0mm

B45-35G29 B45-35-30 B45G35G30 B45-35G35 B45-35-35

$ 24 $ 25 $ 28 $ 28 $ 28

45.10mm 45.05mm 45.05mm 45.06mm 45.05mm

35.17mm 35.11mm 35.12mm 35.13mm 35.11mm

29.2mm .14 kg 30.0mm 30.0mm .15 kg 35.0mm .17 kg 35.0mm .18 kg

B45G35G35 B45G35-35 B45-35X35 B45-35G38 B45G35G40

$ 30 $ 24 $ 34 $ 30 $ 32

45.05mm 45.05mm 45.04mm 45.05mm 45.05mm

35.10mm 35.11mm 35.22mm 35.10mm 35.10mm

35.0mm .17 kg 35.0mm 34.9mm .17 kg 38.0mm 40.0mm .19 kg

B45G35G44 B45G35G45 B45-35-49 B45-35-50 B45G35G50

$ 32 $ 33 $ 34 $ 44 $ 38

45.06mm 45.06mm 45.05mm 45.04mm 45.05mm

35.35mm 35.12mm 35.11mm 35.05mm 35.11mm

44.0mm 45.0mm 49.0mm 50.0mm 50.0mm

.20 kg .22 kg .24 kg .25 kg .25 kg

B47G35G45 $ 36 47.05mm 35.15mm 45.0mm B50G35G55 $ 36 ! 50.05mm 35.15mm 55.0mm B53G35G45 $ 64 53.12mm 35.10mm 45.0mm

.25 kg

Bobcat 3 3 1 - B U S H - H B 23 +60 J50703 4 4pa 6 Toyota 90387-35003-71 A 224 31pa 7 Made extra by mistake Large Clearance Plain Bush Z 104 0pa MISTAKE Toyota 35DK8 331-Bush-J C 88 7pa 10 DIGRITE AVANT Bobcat 331-Bush-HR D 26 4pa 11 IHI 404 323 109 C 38 TESK 2005 Chain Bearing Bush B 74 Bobcat & IHI 404 330 200 A 97 Komatsu PC20-BUSH-H,I,J,K B 31 TESK 2008 Plain Bush B 70

$ 31 $ 24 $ 30 $ 32 $ 34 $ 36 $ 30

1.751” 1.751” 1.751” 1.751” 1.751” 1.751” 1.751”

1.506” 1.508” 1.506” 1.506” 1.507” 1.507” 1.508”

7 INT G6 7 7 8 33811-11260,404 323 105 8

6.0 mm Cobalt Drill Bit Komatsu PC20-HR A 70 47pa Jobber 9 Carded 2pa $ 9.00 ea No Internal Groove D 12 AVANT CodeTL-9LM060Co Kubota 68741-66630 C 29 8pa 11 plus GST Furukawa 550811-11190 C 16 0pa 9 Furukawa 550901-12240 A 80 9 B45-35-40=550901-12240 Pack of Six45pa $42.00 Code: TL6-9LM060Co John Deere H149680 B 20 2pa 9 50 in 1 lot,Use B45g35g45 Excavator 19000-12002 A 54 31pa 9 TESK 2009 Plain Bush C 44 2pa 9 00024-00044=O/BF8 High Tensile EN36A A 60 42pa 18 Purcells JN0225 Excavator 01009-01012 B 33 10pa 10 DISCOUNT FOR QUANTITY

BUSHINGS O.S. TESK 2012 C 10 1pa 7 Quantity Discounts only upon .38 kg $ Reduced $ O.S. TESK 2012 C 39 3pa Available 8 .43 kg Sandvik 9128734300 C 34 23pa 3 grease holes Mainline request provided all 13 outstanding invoices are settled within 7 Days

Bushes for 1.5 inch Diameter Shaft: B44-38-25 B44-38-29 B44-38-32 B44G38G32 B44-38-38 B44G38G38 B44-38-45

13pa 31pa 37pa 10pa 57pa

1.00” .08 kg 1.13” .09 kg 1.25” 1.25” .11 kg 1.50” 1.50” .13 kg 1.75”

Discount for 10 or more of any line item $ 3.00 ea Discount for 20 or more of any line item $ 5.00 ea or more of 6 any line item $ 6.00 ea Plain Bush A Discount 71 for 30 36pa

TESK 2003 Massey Ferguson 846002M1 C 6 +44 J50705 22pa 5 TESK 2003 Plain Bush B 1+40 24pa 8 Old Stock = 1.511” 2006 TESK 2011 C 46 0pa 9 TESK 2005 Plain Bush A 77 45pa 9 TESK Imperial Bush 2011 C 44 4pa 10 TESK 2007 Plain Bush C 75 Pins 20pa and10 Bushes

B44G38G45 $ 30 ! 1.751” 1.504” 1.75” .16 kg $ Reduced $ Greasable Bush C 172 Shims 2pa and 9 Seals B44-38-50 $ 32 1.752” 1.503” 1.97” .17 kg TESK 2006 Plain Bush B 58 10pa 11 Cutters Tools and B44G38G50 $ 36 1.753” 1.504” 1.97” .17 kg TESK 2002 C 38 22pa 12 B44-38-51 $ 31 1.750” 1.500” 2.00” .17 kg Close Tolerance Plain Bush D Minimum 19 5pa N ew Order 120 J50119 DJ Ruskin Product $150 B45-38-21 $ 26 1.774” 1.500” 0.85” No Disc John Deere H145069 D Prices subject 14pa to change without notice B45-38G25 $ 18 1.779” 1.505” 1.00” No Disc John Deere U42465 Z 1 0pa Quantity Discounts B45-38-32 $ 29 1.775” 1.510” 1.25” .12 kg O.S. TESK 2008 Plain Bush C 34 0pa Discount for 10 or more of any line item $3

Dimensions shown are for the KSet Bush, not for nearby OEM numbers Discount for 20 or more of any line item $5

Discount for 30 or more of any line item $6

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 7 September 2015

Bushings - Hardened Steel - Precision Ground

Suit 1.50” Diameter Shaft Stock, Usage, Mfr, 30-06-14 $

KSet Part No. Price Outside

EX GST

Inside

Length

Manufacture Notes

Locations

09-09-2015

3,913

$ 4,955

B46-38-62 $ 42 ! 46.05mm 1.506” 2.44” . 27 kg $ Reduced $ Plain Bush C 24 0pa 10 34 in 10 years for Hardened Bushes B46-38-76 $ 62 46.05mm 1.506” 3.00” . 32 kg O.S. TESK 2008 Plain Bush C 5Grease +16 6pa 12 Renolit 450g B47-38G45 $ 68 47.02mm 38.08mm 44.8mm . 21 kg Sandvik 3176 7714 00 B 21 9pa 12 XTB2 VME12 FeedExtCylRod life multipurpose grease that is specially designed LongB48-38-18 1.876” 1.509” 0.69” D30930 for extreme bearing applications. Suitable for a variety of B48-38-22 $ 22 1.876” 1.502” 0.87” . 12 kg TESK 2014 Plain Bush D 24

0pa automotive applications,including wheel bearing and B48-38-25 $ 27 1.876” 1.509” 1.00” . 12 kg CASE 455C D31140 A 32 15pa 8 lubrication 4-IN-1 general chassis B48-38-29 $ 22 1.876” 1.508” 1.13” . 14 kg Case 580 D30932, D37763 C Product 0 +60 136pa 8 Sold in +2014 Code : GR-XTB2 $104ea GST B48-38-32 $ 24 1.876” 1.509” 1.25” . 17 kg CASE D30933 C 33 +40 33pa 9 B48G38G32 B48G38G33 B48-38-37 B48G38G38 B48-38-39

$ 32 1.876” 1.509” 1.25” . 15 kg John Deere U10616 $ 35 48.05mm 38.15mm 33.00mm Yanmar VIO40 Metric $ 26 1.877” 1.506” 1.48” . 19 kg TESK 2009 Plain Bush $ 31 1.877” 1.508” 1.50” . 18 kg Massey Ferguson Greasable $ 28 1.876” 1.509” 1.53” . 20 kg Case 580 D30929 & D49429

C 23 5pa 8 C 3 +30 18pa 9 C 66 5pa 9 C 4 +30 12pa 9 A 17+56 39pa 10

B48G38G40 B48G38G45 B48-37-45 B48G38G49 B48-38G50

$ 35 48.05mm 38.15mm 40.00mm . 21 kg $ 36 48.05mm 38.15mm 45.00mm . 24 kg $ 18 1.870” 1.490” 1.75” . 23 kg $ 32 1.878” 1.507” 1.93” . 24 kg $ 36 48.05mm 38.15mm 50.0mm

TESK 2005 Yanmar VIO20 Scatrak TESK 2009 Tesk 2011

Metric Metric 5717692 Greasable Metric

C 31 C 25 Z 22 C 30 C 11

0pa 11 5pa 12 0pa 2pa 12 4pa 10

B48-38-51 B48-38G55 B48G38G55 B48-38-70

$ 28 1.877” 1.506” 2.00” . 26 kg $ 26 48.05mm 38.15mm 55.0mm $ 33 48.05mm 38.15mm 55.0mm . 29 kg $ 46 1.876” 1.512” 2.75” . 31 kg

TESK 2009 Yanmar VIO20 TESK 2011 Case

Plain Bush Metric Metric D30931

C 21 D 36 B 34 C 13

4pa 12 0pa 10 0pa 12 6pa 10

B50G38G49 $ 32 50.07mm 38.14mm 49.00mm . 30 kg TESK 2008 B50-38-57 $ 30 50.06mm 1.500” 2.24” John Deere

Metric C 7 +30 H145104 C 2 +30

B51-38-26 B51G38-29 B51-38-31 B51G38G32 B51-38-35 B51-38-37

$ 26 $ 18 ! $ 32 $ 34 $ 32 $ 24 !

2.002” 2.0025” 2.002” 2.002” 2.002” 1.990”

1.506” 1.507” 1.509” 1.508” 1.507” 1.497”

1.00” . 17 kg 1.13” . 17 kg 1.24” 1.25” 1.37” . 24kg 1.48”

TESK 2000 Plain Bush $ Reduced $ Caterpillar 7K9592 TESK 2007 Plain Bush TESK 2000 Greasable Length = 34mm Plain Bush $ Reduced $ John Deere T41954

B51G38G38 B51G39G38 B51-38-39 B51G38G44 B51-38-45

$ 24 ! $ 32 $ 30 $ 15 $ 28

1.990” 2.002” 2.002” 1.998” 2.002”

1.497” 1.509” 1.508” 1.518” 1.508”

1.50” 1.50” . 25kg 1.50” 1.75” . 28kg 1.75” . 31kg

$ Reduced $ John Deere T41963 D 8 TESK 2003 Greasable C 19 Caterpillar 5D4541 B 36 John Deere T33536 Z 11 TESK 2008 Plain Bush C 47

B51G38G45 B51G38-47 B51-38-51 B51G38G51 B51G38G60 B51-38-63

$ 30 $ 30 $ 34 $ 41 $ 46 $ 24 !

2.002” 2.003” 2.002” 2.002” 2.002” 1.992”

1.508” 1.507” 1.510” 1.510” 1.505” 1.520”

1.75” 1.86” 2.00” 2.00” 2.37” 2.50”

B51G38G63 B51G38G70 B51G38G76 B51G38G102 B52G38G38

$ 44 $ 59 $ 58 $ 64 $ 30

2.002” 2.002” 2.002” 2.002” 2.063”

1.510” 1.506” 1.508” 1.509” 1.509”

2.48” . 42kg 2.75” 3.00” .51 kg 4.00” .69 kg 1.50”

B54-38-25 B54-38-49 B54-38-53 B54-38-54 B54-38H82 B54-38H90

$ 34 $ 46 $ 38 $ 50 $ 50 $ 50

2.126” 2.126” 2.128” 2.125” 2.127” 2.127”

1.504” 1.504” 1.501” 1.501” 1.504” 1.504”

1.00” 1.94” 2.08” 2.13” 3.23” 3.54”

. 30kg . 32kg . 35kg . 34kg . 40kg . 42kg

.23 kg .45 kg . 50kg . 50kg

B55G38G51 $ 30 55.09mm 1.509” 2.01” B57G38G43 $ 20 ! 2.243” 1.508” 1.69” B57-38-51 $ 30 2.252” 1.508” 2.00” . 58kg B60-37-37 $ 28 2.365” 1.451” 1.46” B76-38-44 $ 36 3.000” 1.500” 1.75” Dimensions shown are for the KSet Bush,

A 32 C 26 A 59 B 22 B 51 D 12

9pa 10 9pa 10

60 in 9 years

M8017 CASE $30.10 =1.512”

670B 672B

13pa 8 4pa 8 6wExt,CE $6.91 69pa 8 sold 60 in 1 lot 4pa 10 19pa 10 Should be 34.8mm long 0pa To Discontinue 0pa 15pa 9 20pa 8 0pa 5pa 8

To Discontinue

TESK 2003 Greasable Caterpillar 7K9593 4 x 6 holes TESK 2009 Plain Bush TESK 2000 Greasable TESK 2000 Greasable $ Reduced $ John Deere T101148

C 42 Grease 4pa 11 BAY 22 PER TIME for EMU Pin Steel Grease0pa for Excavator Bushes N 18 3ext1int,7.6w ext groove Maitland Hunter Valley NSW C 27pa 10 A 73 32pa 12 A 25 30pa 14 D 16 0pa To Discontinue

TESK 2007 TESK 2011 TESK 2004 TESK 2004 O.S. TESK 2007

C 48 DISCOUNT 26pa 14 FOR QUANTITY A 44 13pa 17 BUSHINGSHydraulic Hotline C 22 22pa 15 Quantity Discounts Available only upon C 28 6pa 22 request provided all outstanding invoices C 10 9 within 7 Days are8pa settled Discount for 10 or more line itemEng$ 07 3.00 ea C 17 9pa 8 of any Woodtech 4123 1136 for 20 or more any line item $ 5.00 ea C Discount 4 5pa 9 Wofoodtech 2.1255”x 1.5035x 1.937” 30 or more Svik;2.1275”Dia of any line item $ 6.00 ea D Discount 28 for 0pa x 1.501”Dia,29HRC K,S3 A 56 8pa 13 37HRC 1.500-2 PG70 D 45 0pa 20 .71 kgC=23 D=16 x2 C 31 Bushes 0pa 22 and .78 kgC=30 D=16 x 2 Pins

Greasable Greasable Greasable Greasable Greasable

TESK 2010 Plain Bush TESK 2010 Plain Bush Eimco New A2U913-194145 Eimco Old A2U913-194145 Eimco 2 x 16 hole A2U913-194264 Eimco 2 x 16 hole A2U913-194197 Plain Bush R82942 $ Reduced $ T126936, T47070 TESK 2009 Plain Bush John Deere T81452 Bucket Boss 52HRC not for nearby OEM numbers

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

D 13 Seals 1pa 12 and Shims D 77 10pa 5 andTo Discontinue Cutters Tools C 16 7pa 11 Z Minimum 9 0pa Product Order $150 Z 9 0pa Prices subject to change without notice

Discount for 10 or more$3 Discount for 20 or more of any line item $5 Discount for 30 or more of any line item $6

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 8 September 2015

Bushings - Hardened Steel - Precision Ground Suit 40mm to 45mm Diameter Shaft Stock, Usage, Mfr, 26-02-14 $

EX GST

Inside

Length

Manufacture Notes

Locations

B44-40-25 B44-40-30 B45-40-38 B45-40-47

$ 28 $ 29 $ 35 $ 40

44.05mm 44.05mm 45.05mm 45.05mm

40.05mm 40.05mm 40.10mm 40.10mm

25.0 30.0 38.0 47.0

mm .06 kg Mount Isa mm .07 kg Mount Isa mm .10 kg TESK 2012 mm .12 kg TESK 2004

B48-40-20 B48-40-30 B48-40-31 B48-40-38 B48G40G60

$ 29 48.04mm $ 29 48.03mm $ 29 48.03mm $ 20 ! 1.875” $ 54 48.05mm

40.05mm 40.09mm 40.04mm 40.20mm 40.12mm

20.0 30.0 30.0 38.1 60.0

mm .085 kg Sandvik 5502 3390 mm .13 kg Sandvik 4985 2501 mm .13 kg Sandvik 4536 8998 mm $ REDUCED $ Case580 G108507 mm .26 kg Kobelco 2004 Greasable

B50-40G24 B50-40-28 B50G40G30 B50-40-32 B50-40G32

$ 30 50.10mm $ 31 50.03mm $ 30 ! 50.05mm $ 29 50.00mm $ 29 50.03mm

40.17mm 40.20mm 40.10mm 40.22mm 40.16mm

24.26mm 28.0 mm 30.0 mm 32.0 mm 31.9 mm

B50G40G34 B50-40-35 B50-40G39 B50-40-39 B50-40-40

$ 34 50.05mm $ 30 50.03mm $ 34 50.10mm $ 28 ! 50.05mm $ 35 50.05mm

40.11mm 40.18mm 40.18mm 40.17mm 40.29mm

34.6 34.8 39.2 39.5 40.0

mm Furukawa 353541-21130 mm Case 580 SLE Plain Bush mm .22 kg IHI 35J-BUSH-H,I,J,K,G mm .22 kg Kubota KX41 68741-6677-0 mm .22 kg John Deere R72579

B50G40G40 B50G40G45 B50G40X45 B50-40-50 B50G40G50

$ 38 ! 50.05mm $ 39 50.05mm $ 40 50.05mm $ 42 50.05mm $ 42 50.05mm

40.11mm 40.12mm 40.15mm 40.17mm 40.17mm

40.0 45.0 45.0 50.0 50.0

mm mm mm mm mm

B50G40G60 $ 44 50.10mm B50G40G62 $ 44 50.09mm B50G40G67 $ 47 50.09mm B50-40-70 $ 42 50.01mm B50G40G80 $ 42 ! 50.10mm B50-40G100 $ 52 ! 50.10mm

40.17mm 40.12mm 40.25mm 40.23mm 40.17mm 40.25mm

60.0 mm .32 kg Hydraulic cylinder bush, Greasable 62.0 mm .33 kg John Deere R81488 67.0 mm .37 kg John Deere T100240 70.0 mm .39 kg CASE 580K D129240 80.0 mm .44 kg $ REDUCED $ Greasable 100.0mm $ REDUCED $ T76638

.13 kg .16 kg .16 kg .18 kg .18 kg

Thin Wall Thin Wall Plain Plain

IHI35J-BUSH-HR 075-223-221 IHI35J Takeuchi 075 224 021 075 223 923 OF8/BF8 .28 kg Kubota KX71 68351-6776-0 .27 kg Kubota KX71 68351-6777-0

Code:

J50121 S’VIK $167.30

7 7 8 7 7

CASE $21 22pa 2014 INT 4

Int 6W

A 63 A 29 B 42 A 86 B 33+60

14pa 8 +772 Z STORE 352541-21160 13pa 8 580 SLE=40.20 13pa 9 404 323 104 IHI 8pa 10 KX41 ORIG =33.5 + RECESS 41pa 10 Original = 40.40

A 70 A 84 C 20 B 52 A 109

58pa 10 TAKEUCHI 075 224 221 IHI 31pa 10 19pa 13 075 223 923 : BF8 9pa 10 57pa’14 Orig=43wide+recess 53pa 11 Orig=B50-40G50

A 50 14pa 13 Eureka Tool B 63 24pa 13 Digrite C 15 3pa 13 Steel $12.00 CTAP 34- High Speed 6pa 15 Plus GST D8mm 24 x 1.25 Intermediate 4pa 17 DCode: 14 TL-CMCHI080 7pa 18

Plain Bush Greasable

D6 14 4pa 11 Pack DTAPS 88 - HSS 8pa 12 $ 64.00 / 6

x 1.25 Intermediate O.S. TESK 2009 Plain Bush C8mm 10+50 J50614 36pa 12 10pa’14 10pa’14 $ REDUCED $ 9R0111 DCode: 22 TL6-CMCHI080 0pa 11 9R0111 CE$11.04 O.S. TESK 2011 Greasable C 13 1pa 12 Case 580SLE D136570 C 11 5pa 10 ORIG.=55.00mm .36 kg Tesk 2004 Greasable Bush C 6+30 J50614 18pa 16 BF8 .56 kg John Deere 315 R81849 C 14 5pa 13 315 WAS 40.28 .47 kg TESK 2006 Plain Bush A 81 20pa 12 ZEMEK /SWIFT ENG .34 kg .29 kg .37 kg .26 kg

40.14mm 40.25mm 40.16mm 40.22mm 40.16mm 40.22mm 40.12mm

50.0 38.1 50.0 30.0 45.0 65.0 50.0

B57-40-23 $ 34 56.56mm B57-40-24 $ 35 56.68mm B60-40-32 $ 42 ! 60.10mm B60-40-45 $ 42 ! 60.10mm B60F40-43 $ 50 60.**mm B60G40G50 $ 59 60.08mm B60G40G60 $ 62 60.08mm B70G40G120 $ 120 70.00mm

40.11mm 40.21mm 40.15mm 40.15mm 40.**mm 40.17mm 40.16mm 40.10mm

22.7 mm .24 kg Case 580K G108526 24.0 mm .25 kg Case 542668 32.0 mm .40 kg TESK Heavy Wall 2013 45.0 mm .57 kg TESK Heavy Wall 2010 43.0 mm Flange Bush 50.0 mm TESK Heavy Wall 2013 60.0 mm .73 kg TESK Heavy Wall 2009 120.0mm 2.41 kg TESK Heavy Wall 2009

mm mm mm mm mm mm mm

ACode: 113 TL-9LM068 76pa 7 A 50 18pa 8 N6 Pack +14 DJobber 17 Drills 0pa 8 B$ 22.00 48 / 6 24pa 14 BTL6-9LM068 34 12pa B 20 22pa CUse +50For

20pa C8mm 25 x 1.25 Tap0pa B 33 10pa

.21 kg .24 kg

$ 48 52.07mm $ 24 ! 53.08mm $ 45 53.08mm $ 30 55.01mm $ 44 55.06mm $ 48 55.07mm $ 47 56.05mm

B52-40-50 B53-40-38 B53G40G50 B55-40-30 B55G40X45 B55G40G65 B56-40-50

C6.8mm 37 Jobber4pa 7 HSS Drill Bit CTitanium 13+36J50908 21pa 7 $ 5.00 ea Nitride Coated C135 25 degrees 22pa split point8 A 46+60J50908 53pa 10

Bush Bush Bush Bush

IHI35J-BUSH-HL 404 323 101 CASE Loader Bkt D129264 Hydraulic cylinder bush, Greasable CASE 580K E172051 Kubota KX71 68741-66770

B51-40-38 $ 35 2.002” 40.17mm 38.0 mm O.S. TESK 2007 B51G40G50 $ 29 ! 2.002” 40.16mm 50.0 mm $ REDUCED $

$ 7,343

25-08-2015

6.8 mm

KSet Part No. Price Outside

9,860

D 9 0pa 7 WITHOUT RECESS BUSHINGS C5 0pa 7 NO RECESS Quantity Discounts Available only upon D 12 4pa all outstanding invoices Drequest 13 provided 4pa 10 Mainline Boring Paul Dimarco within 7 Days Z 1 are settled 0pa more of Hany $ 3.00 ea 0075 CDiscount 11 for 10 or5pa 11 uskyline Skiditem Steer,Karl 039792 A 36+90 J50816 97pa 12 Discount for 20 or more of any line item $ 5.00 ea D 1 for 30 or2pa 16 Discount more of any line item $ 6.00 ea

Bushes for 1 3/4” Diameter Shaft: B51-44-38 B51G44G44 B51-44-51 B51G44G51

$ 39 $ 40 $ 48 $ 48

2.002” 2.001” 2.002” 2.002”

1.759” 1.754” 1.756” 1.756”

1.50” 1.75” 2.00” 2.00”

.14 kg .16 kg .19 kg .19 kg

Massey Ferguson Plain Bush Hydraulic cylinder bush, Greasable TESK 2011 Plain Bush Hydraulic cylinder bush, Greasable

B 31 C 48 B 30 C 20

30pa 10 9pa 11 22pa 12 5pa 12

Minimum $150

applies before GST & Freight

M8032

JN40813

B54-44-16 $ 21 2.125” 1.761” 0.62” Case G33858 D 0pa

and Accessories B54-44-22 $ 25 2.126” 1.758” 0.88” .12 kg Case D33047 & D46405 C 14 Tools16pa 7 G34845 used7 to make up B54-44-26 $ 25 2.125” 1.759” 1.01” .14 kg Case D34340 B 47 may be 38pa Wholesale B54-44-29 $ 24 2.125” 1.760” 1.12” .16 kg CASE 455C D35071 DMinimum 21 4pa 7 Orders of $150 4-IN-1 to change without notice B54-44-30 $ 22 ! 2.125” 1.757” 1.19” .16 kg CASE 580K D94018 CPrices 50 subject0pa B54-44-31 $ 22 ! 2.125” 1.760” 1.25” .16 kg Case D37392 Z 4pa 4 Quantity Discounts Available Only upon

Dimensions shown are for the KSet Bush, not for nearby OEM numbers request provided all outstanding invoices are settled within 7 Days

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

Discount for 10 or more of any lineCopy item $3 $150 Min Order Office Newcastle - Sydney Region - Australia Discount for 20 or more of any line item $5

PageDiscount 9 September 2015 for 30 or more of any line item $6

Case Hardened Bushes - Precision Ground Suit 1.75” Diameter Shaft Stock, Usage, Mfr, 30-06-14 $

Locations Stock Usage Mfr 06-06-2015 $ 3,535

KSet Part No. Price Outside

EX GST

Inside

Length

B54-44-37 B54-44-38 B54-44-39 B54G44G38 B54G44G44

$ 41 $ 17 $ 32 $ 43 $ 36

1.753” 1.750” 1.760” 1.754” 1.754”

1.50” .27 kg TESK 2004 1.48” No Discount John Deere Bushing U43636 1.50” .27 kg CASE 455C D34354 1.50” .22 kg Hydraulic cylinder bush, Greasable 1.75” .25kg Hydraulic cylinder bush, Greasable

A 8.5mm 41 Jobber 24pa 10 Drill Bit HSS Z Titanium 32 8pa 8 Nitride Coated C 135 37 degrees14pa 8 split point B$ 41 9.00 ea 9pa

plus 8 GST C 12 8pa 8

Code: TL-C9LM085

B54G44G51 B54G44G52 B54-44-58 B55G44G45 B55G44G66

$ 22 2.118” 1.765” $ 46 2.126” 1.753” $ 38 2.126” 1.759” $ 35 55.07mm 1.761” $ 48 55.07mm 1.761”

2.00” .28 kg 2.00” .28 kg 2.25” .30 kg 1.77” 66.0mm .41 kg

John Deere 670B,672B T42080 TESK 2005 Greasable Case D42788 John Deere Bushing H145630 John Deere 670B,672B R89940

D 47 4pa 7 6 Pack A 12 +40 J50614 37pa 13 Jobber Drills6pa 13 C 62 Z $2 42.00 / 6 0pa C Code: 0 2pa 13

B57-44-19 B57-44-24 B57-44-25 B57-44-26 B57-44-27 B57-44-28

$ 18 $ 29 $ 13 $ 33 $ 16 $ 22

2.251” 2.250” 2.242” 2.250” 2.242” 2.251”

1.761” 1.761” 1.760” 1.760” 1.770” 1.759”

0.75” Case D40243 0.94” .19 kg Case 480B Ft Stg Axle D61241 1.00” No Discount John Deere Bushing U42219 1.00” .20 kg Case 480B Ft Stg Axle D43940 1.06” No Discount John Deere Bushing T159279 1.10” .22 kg Case D127172, 107124A1

Z 5 2pa 7 D Use 1 For Tap 0pa 8 Z 10mm 15 x 1.5 0pa C 22 12pa 9 Z 16 0pa D 25 2pa 8

B57-44-29 B57-44-30 B57-44-32 B57-44-33 B57-44-34 B57-44-35

$ 17 $ 30 $ 24 ! $ 20 $ 30 $ 30

2.243” 2.250” 2.251” 2.243” 2.251” 2.240”

1.765” 1.760” 1.761” 1.760” 1.759” 1.757”

1.12” No Discount John Deere Bushing U10481 1.14” .24 kg Case 107124A1 1.25” .25 kg John Deere T140669 Case D37495 1.26” .25 kg John Deere T25898 1.36” .25 kg Case 580 SLE Bushing 1.38” .25 kg John Deere T114515

Z 22 C 7 C 59 Z 9 C 19 D 3

0pa 6pa 8 2pa 9 0pa 8pa 8 0pa 8

B57-44G35 B57-44-36 B57G44G38 B57G45G38 B57-44-39

$ 26 $ 30 $ 18 $ 18 $ 36

2.253” 2.251” 2.240” 2.243” 2.252”

1.757” 1.757” 1.748” 1.765” 1.756”

1.38” .25 kg CAT950-BUSH-Stg 1.39” .25 kg Caterpillar 1.50” No Discount John Deere Bushing 1.50” No Discount John Deere Bushing 1.50” .30 kg Case

D 12 C 14 C 47 Z 17 B 20

2pa 9 7pa 9 2pa 8 0pa 15pa 12

B57-44-42 B57-44-43 B57-44-44 B57-44-45 B57G44G45 B57G44-46

$ 36 $ 14 ! $ 25 $ 18 $ 42 $ 18

2.251” 2.240” 2.252” 2.243” 2.251” 2.243”

1.760” 1.767” 1.756” 1.760” 1.756” 1.770”

1.65” .34 kg Case D55626 1.70” No Discount $Reduced$ John Deere T34301 1.75” .35 kg TESK 2004 Plain Bush 1.77” No Discount John Deere Bushing T25875 1.75” .36 kg Hydraulic cylinder bush, Greasable 1.81” No Discount John Deere Bushing U16017

B57G44G46 B57-44-50 B57-44-51 B57G44-52 B57-44-56 B57G44G57 B57G44-59

$ 16 ! $ 16 ! $ 36 $ 30 $ 15 $ 42 $ 28 !

2.240” 2.250” 2.252” 2.250” 2.242” 2.252” 2.251”

1.765” 1.765” 1.756” 1.760” 1.770” 1.756” 1.758”

1.81” No Discount $Reduced$ John Deere T34414 1.97” No Discount $Reduced$ Plain Bush 2.00” .40 kg CAT 953 Plain Bush 2.06” Off-set Groove 2:5:12 D129061 2.20” No Discount John Deere Bushing T113755 2.25” .44 kg Hydraulic cylinder bush, Greasable 2.34” T $Reduced$ CAT-950-BUSH-J 7K0085

B57G44G60 B57-44-60 B57G44G63 B57-44-70 B57G44G70 B57G44G76 B57-44-80

$ 46 $ 48 $ 46 $ 30 $ 58 $ 64 $ 48

2.251” 2.252” 2.251” 2.250” 2.252” 2.252” 2.258”

1.755” 1.756” 1.757” 1.760” 1.756” 1.756” 1.753”

2.37” 2.37” 2.46” 2.75” 2.75” 3.00” 3.13”

B57G44G92 B57-44-94 B57G44G94 B57T44-104 B57-44G125 B57G44G145

$ 51 $ 51 $ 49 $ 48 $ 50 $ 50

2.243” 2.250” 2.251” 2.250” 2.251” 2.240”

1.765” 1.756” 1.756” 1.755” 1.756” 1.759”

2.126” 2.115” 2.125” 2.126” 2.126”

4,084

Manufacture Notes

7J9688 7K9589 T41976 U16070 D50146

4-IN-1

8.5 mm

TL6-C9LM085

570g

580K ORIG. = 2.249” FORD BH BKT

CE$8.84

260g

C 14 6pa 13 Z TAP 60 - High Speed 0pa TO DISCONTINUE 320g Steel $21.00 C 28 10mm x 1.5 12pa 13 Intermediate Plus GST Z Code: 38 TL-CMCHI100 0pa 325g C 19 9pa 13 Z 622 0pa 333g Pack

.64 kg

Hydraulic cylinder bush, Greasable TESK 2009 Plain Bush Caterpillar 2K4504 Case D121845 TESK 2013 Greasable TESK 2011 Greasable Caterpillar 8J6535

Z TAPS 4 - HSS 0pa $ 94.00 / 6 333g C 10mm 65 x 1.5 Intermediate 7pa 6 370g B Code: 64 TL6-CMCHI100 33pa 13 D 17 0pa D129061 C12M7D5 D 2 4pa 6 415g FOR QUANTITY JN40813 A 40 DISCOUNT 12pa 15 BUSHINGS C 6 0pa = B57G44-59.4 10w Ext CE$11 Quantity Discounts Available only upon C request 27 provided 8pa 16

JN40813 all outstanding invoices C 17 12pa 15 are settled within 7 Days CDiscount 17 for 10 or5pa 16 = B63-44G63 CEea24.80 more of any line item $ 3.00 CDiscount 56 for 2012pa 17 made$ 16 by mistake or more of anyCurtis line item 5.00 ea CDiscount 10 for 30 or4pa Hayward Hydraulics more17 of any line item $ 6.00requested ea C 25 9pa 18 C 11 11pa 16 CAT615,623 Scrapers With 8J6536

3.62” 3.70” 3.70” 4.10” .79 kg 4.92” 5.71”

John Deere 670B 672B T59506 Case 580SK-BUSH-J-Old TESK 2004 Greasable $Reduced$ Case 580SK-Bush-J new $Reduced$ Case 580SK-Bush-J extra J Deere T121987,T126201,T105930

C 4 8pa 10 C 6 Bushes 6pa 14 580K WasPins D127168 580SK “J” and C 11 2pa 10 and307186A1 Shims D 15 Seals 0pa 15 K9x20deg TO 51Ø Cutters and Tools C 8 0pa Extra length requested by ALR Z 4 0pa

.46 kg .48 kg .49 kg .53 kg .53 kg .58 kg

Minimum Product Order $150

B60-44-51 $ 44 2.376” 1.756” 2.00” .51 kg TESK 2006 Plain Bush C 79 15pa 13 Prices subject to change without notice B64-44-51 $ 58 2.502” 1.756” 2.00” .66 kg TESK 2005 Plain Bush C 19 11pa 13 B64-44-63 $ 63 2.502” 1.758” 2.50” TESK 2003 Plain Bush C 22 2pa 15 Popey B64G44G63 $ 58 2.502” 1.758” 2.50” .77 kg Hydraulic cylinder bush, Greasable C 13 4pa 16 B64G44G76 $ 58 2.502” 1.756” 3.00” Hydraulic cylinder bush, Greasable D 25 0pa 17 Disc for 10 of any item $3 Disc for 20 of any item $5 Dimensions shown are for the KSet Bush, not for nearby OEM numbers Disc for 30 of any item $6

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 10 September 2015

Bushings - Hardened Steel - Precision Ground

KSet Part No. Price

EX GST

Outside

Inside

Length

Suit 45mm Diameter Shaft

Manufacture Notes

Locations Stock Usage Mfr 8-06-2015

$ 9,285

B50G45G45 B50-45X45 B50-45-56 B50-45-57

$ 34 ! $ 48 $ 42 $ 45

50.07mm 50.05mm 50.07mm 49.83mm

45.10mm 45.10mm 45.10mm 45.09mm

45.0mm 45.0mm 56.0mm 57.0mm

. 13 kg . 13 kg . 17 kg for

$ REDUCED $ Plain Bush C 20 14pa 11 10.2mm 12pa Jobber HSS QMRC 5542 TESK 2013 BF8 C 36 14 Drill BitJN31001 Titanium Nitride Coated TESK 2009 Plain Bush A 84 57pa 12 135 degrees split John Deere T140211,T69352 C 30 11pa 12point

P Dimarco, lots of 4

B55G45G25 B55-45-30 B55-45-35 B55G45G35 B55-45-36 B55-45X36

$ 33 $ 32 $ 24 ! $ 35 $ 34 $ 48

55.05mm 55.05mm 55.05mm 55.05mm 55.07mm 55.05mm

45.15mm 45.15mm 45.15mm 45.16mm 45.15mm 45.13mm

25.0mm . 15 kg 30.0mm . 19 kg 35.0mm 35.0mm . 20 kg 36.0mm . 23 kg 44.8mm

TESK 2012 Greasable Bush C 38 10pa 9 Kubota 161 Bkt Cyl Ram end Code: TL-9LM102 Kubota KX161-3SS Plain Bush A 18 26pa 9 $ REDUCED $ Plain Bush C 35 10pa 9 404 326 000=B55G45-34 6 Pack 28pa 10 19000-46502 = B55G45G45 TESK 2004 Greasable Bush A 58 Jobber Drills $ 50 / 6 PY12B 010 09P1 SK045-BUSH-HL C 21 6pa 9 Kubota KX161-3SS-Bush-HL BF8 N +24 J50707TL6-9LM102 2pa 14 Code:

B55G45G39 B55-45-40 B55G45G40 B55-45-41 B55F45-42 B55G45G44

$ 37 $ 35 $ 41 $ 35 $ 25 $ 38 !

55.07mm 55.11mm 55.05mm 55.10mm 55.03mm 55.05mm

45.15mm 45.28mm 45.13mm 45.15mm 45.15mm 45.18mm

38.8mm . 23 kg 40.0mm . 25 kg 40.0mm . 24 kg 40.0mm . 25 kg 42.0mm 44.0mm . 26 kg

Yanmar VIO 50-BUSH-HL C 28 Use For 5pa 10 John Deere T76639 A 142

52pa M12 x 1.75 Tap 10 Yanmar VIO 50-BUSH-G A 65 +134 101pa 11 J50820 19000-10302 TESK 2004 Plain Bush A 75 18pa 10 311811-11210=B55-45G41 Massey Ferguson 3501770 M2 Z 37 4pa 9 M8028 $ REDUCED $ Greasable Bush D 40 2pa 11 To discontinue - use B55g45g45

B55-45G45 B55-45X45 B55G45G45 B55G45X45 B55-45X46

$ 36 $ 50 $ 45 $ 52 $ 50

55.06mm 55.05mm 55.07mm 55.05mm 55.05mm

45.13mm 45.13mm 45.13mm 45.13mm 45.13mm

44.8mm . 27 kg 44.8mm 44.8mm .26 kg 44.8mm .27 kg 45.0mm . 27 kg

01743-10405 PC45-1-D,E KY045-H A 76 Kubota KX045-BUSH-HL BF8 A 55 Komatsu 07144-10405 A 81 Komatsu 20T-70-71870 A 41 Komatsu 20T-70-71880 O/BF8 A 58

13pa 11 33pa 14 35pa 12 30pa 14 24pa 13

352811-11180, 01009-01010 20T-70-25740 PC40-7 SK045-G,HR PC40-7 PC40-7

B55G45G50 B55G45X50 B55-45X51 B55-45G55 B55G45G55 B55-45G59

$ 50 $ 52 $ 52 $ 43 $ 49 $ 40

55.05mm 55.05mm 55.06mm 55.05mm 55.06mm 55.05mm

45.13mm 45.13mm 45.13mm 45.13mm 45.15mm 45.12mm

50.0mm . 30 kg 50.0mm . 30 kg 51.0mm 55.0mm .35 kg 55.0mm . 33 kg 59.0mm . 36 kg

Yanmar VIO 50-BUSH-HR A 88 Kubota KX045-BUSH-R BF8 C 46 Komatsu PC45-BUSH-F OF8 C 26 Furukawa 337811-11130 C 24 TESK 2005 Greasable Bush C 82 550831-23130 610511-51130 C 8

53pa 12 28pa 16 16pa 15 9pa 11 36pa 12 2pa 10

550811-11150 331831-13130

B55-45-60 B55G45G60 B55-45X60 B55G45G61 B55F45X65 B55G45G66

$ 47 $ 54 $ 62 $ 38 $ 120 $ 55

55.07mm 55.05mm 55.10mm 55.07mm 55.07mm 55.05mm

45.15mm 45.13mm 45.16mm 45.26mm 45.18mm 45.19mm

60.0mm .37 kg 60.0mm .39 kg 60.0mm .37 kg 61.0mm 65.0mm 66.0mm .39 kg

B56-45-40 B56-45-50 B56G45G50 B58-45-34 B58-45-40 B60G45G40 B60G45G50

$ 47 $ 38 $ 48 $ 39 $ 39 $ 46 $ 50

56.05mm 56.05mm 56.05mm 58.10mm 58.10mm 60.10mm 60.07mm

45.13mm 45.13mm 45.13mm 45.29mm 45.29mm 45.14mm 45.13mm

40.0mm . 27 kg 50.0mm . 34 kg 50.0mm . 33 kg 34.0mm . 29 kg 39.9mm . 34 kg 40.0mm . 37 kg 50.0mm . 47 kg

Kubota KX161-BUSH-J B 35 3pa 10 TAP - High Speed TESK 2005 Greasable Bush A 44 37pa 12 Steel $26.00 12mm x 1.75 Intermediate Plus GST Yanmar VIO 50-BUSH-I O/BF8 B 34 23pa 16 Code: TL-CMCHI120 John Deere H148881 D 2 4pa 8 (to discontinue) Yanmar VIO 50-BUSH-J F99.7 C 12 4pa 47 N10.5 R55x5.5 John Deere R81850,R84376 C 21 6 Pack 11pa 15 TAPS - HSS $ 117.00 / 6 O.S. TESK 2008 Plain Bush C 39 21pa 10 10mm x 1.75 Intermediate O.S. TESK 2008 Plain Bush C 39 2pa 10 Code: TL6-CMCHI120 O.S. TESK 2010 Greasable C 20 4pa 11 CAT BEARING 9R0411 B 20+36 31pa 10 KSet $9.50 CE $9.74 CAT BEARING 9R0147 D 6 15pa 11 Check Dia!9R0147 CE $11 TESK 2013 Greasable Bush C 40 6pa 12 TESK 2013 Greasable Bush C 38 13pa 14

B60G45G60 B61-45-37 B62-45-42 B62G45G55 B65G45G65 B68G45G55

$ 58 $ 34 ! $ 40 $ 42 ! $ 60 $ 80

60.07mm 61.03mm 62.10mm 62.05mm 65.10mm 68.08mm

45.13mm 45.17mm 45.15mm 45.15mm 45.14mm 45.15mm

60.0mm . 57 kg 37.0mm 42.0mm . 47 kg 55.0mm . 60 kg 65.0mm . 87 kg 55.0mm . 87 kg

$11.00 ea plus GST

BUSHINGS TESK 2002 Greasable Bush B 37 37pa 16 Quantity Discounts $ REDUCED $ Plain Bush C 15 8pa 10 Available only uponE.C.H request provided all outstanding invoices Hitachi EX122, EX60UR C 35 7pa 13 are0pa settled $ REDUCED $ Greasable Bush C 26 15 within 7 Days for 10 or more O.S.TESK 2012 Greasable Bush D Discount 6 8pa 17 of any line item $ 3.00 Titan,eaBMI 20 or more itemHoles $ 5.00 ea Sandvik 912873 4400 A Discount 87 for39pa 15 of any line 3x4Dia Svik$240 Discount for 30 or more of any line item $ 6.00 ea

Suit 1.875” Diameter Shaft: B57-48-19 $ 37 B68-48-65 $ 48

2.252” 1.878” 19.1mm Case 68.06mm 48.13mm 65.0mm . 95 kg 2014

D31512 Plain Bush D 22 Plain Bush Z 14

$ 40 Electronic Digital Caliper 150mm Sterling

Six Pack Code: TL6-EDC150 $ 198 for 6 Plus GST

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

0pa 0pa 18

70 Aug 2014 Minimum Sold $150

Dimensions shown are for the KSet Bush, not for nearby OEM numbers Code TL-EDC150

20T-70-71250 57mm long

applies before GST & Freight

Quantity Tools andAvailable Accessories Discounts Only upon request provided may be used to makeinvoices up all outstanding Minimum Wholesale Orders are settled within 7 Days of $150 Prices subject to change without notice

Discount for 10 or more of any line item $3 Discount for 20 or more of any line item $5 Discount for 30 or more of any line item $6

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 11 September 2015

Case Hardened Bushes - Precision Ground

KSet Part No. Price Outside

EX GST

Inside

Length

B55-50-20 $ 54 55.05mm 50.10mm 20.0mm B55G50G50 $ 65 55.05mm 50.17mm 50.0mm B55G50G60 $ 56 ! 55.05mm 50.17mm 60.0mm

Suit 50mm Diameter Shaft Locations Stock

Manufacture Notes

Usage Mfr 31-07-2015 $ 13,525

.16 kg

Thin Wall Plain Bush N 8 for McColl Eng 17 FrequentlyN Asked Questions: Case Hardening Steel: 20MnV6 B 19 Where in17pa 12 Queensland can I buy .20 kg $ REDUCED $ Greasable Bush N 0pa 13 New ?March 2014 20 Dust Seals / Pin Wipers .16 kg

KSet Engineering Pty Ltd

B60-50-19 B60-50-26 B60-49-27 B60-50-27 B60-50-28

$ 27 $ 33 $ 34 ! $ 30 ! $ 24

60.02mm 60.03mm 60.00mm 60.00mm 60.12mm

50.22mm 50.18mm 49.99mm 50.26mm 50.09mm

18.5mm .13 kg Case D129272 D 29 10pa 8 580K ORIG=60.00 x 50.26 Steel Cased Polyurethane Seals 25.6mm .17 kg Case 580SK-Bush-H,I C 16+40 J50708 24pa 9 D140029 = 60.00 x 50.22 available EX STOCK. 27.4mm Case 580K Trunnion G110117 Z 14 0pa INT.CFR.3x45° ONE END. Overnight Delivery in QLD ! 580K 26.5mm .19 kg $ REDUCED $ Case E176226 C 18 0pa anywhere 9 27.0mm John Deere T154277 C 27 7pa 7

B60-50-30 B60-50-31 B60-50-33 B60-50-34 B60-50-36

$ 32 $ 26 $ 33 $ 24 ! $ 33

60.00mm 59.86mm 60.01mm 60.03mm 59.99mm

50.22mm 49.93mm 50.23mm 50.12mm 50.20mm

30.0mm .20 kg Case 580K Loader 31.0mm .20 kg John Deere 33.0mm .22 kg Case 580 SLE 34.0mm .23 kg $ REDUCED $ 36.0mm Case 580K Loader

B60-50X36 B60-50-38 B60-50G38 B60-50-40 B60G50G40

$ 44 $ 40 $ 40 $ 42 $ 40

60.10mm 60.11mm 60.10mm 60.01mm 60.07mm

50.15mm 50.13mm 50.15mm 50.18mm 50.17mm

36.0mm Kobelco SK060-BUSH-HL BF8 C 40 38.0mm .26 kg Matbro 33948/001 A 107 38.0mm .26 kg Int. Groove KY045-Bush-H B 89 40.0mm .27 kg 580SK-Bush-C,D,E D141555 B 46 39.8mm WA420-BUSH-S 707-76-5024 A 156

B60-50-45 B60G50G45 B60G50X45 B60-50-46 B60-49-50

$ 44 $ 32 $ 52 $ 30 ! $ 32

60.01mm 60.10mm 60.10mm 60.05mm 60.12mm

50.23mm 50.15mm 50.15mm 50.11mm 49.71mm

45.0mm .31 kg Case 580K E176478 A 18+60 59pa 11 MATBRO 37452/004 45.0mm .30 kg 075 225 321 Greasable Bush C 79 20pa 12 CENTRE DRILL $ 15.00Was=60.08x50.23x44.4 ea 45.0mm .29 kg Bush Factory Australia BF8 C 25 6pa 16 plus GST

46.0mm .31 kg $ REDUCED $ Plain Bush D No. 23 5 7/16” Dia 0pa 13 49.5mm .35 kg John Deere 315 T127644 D High 2 Speed Steel 2pa 9 VI050-D,E=B60g50g50

B60-50-50 B60-50G50 B60-50X50 B60G50G50 B60G50X50

$ 47 $ 45 $ 56 $ 49 $ 60

60.11mm 60.10mm 60.07mm 60.05mm 60.10mm

50.15mm 50.12mm 50.12mm 50.13mm 50.13mm

Code 50.0mm .34 kg TESK 2004 Plain Bush A 30 +42 J50708 47pa 13 MATBRO 504217 50.28Ø TL-9CD5-716 50.1mm .34 kg Komatsu D65-15 07143-10505 N+16

New Equipt #3002 49.7mm .35 kg Komatsu PC45-C,PC60-7-G BF8 A 11+44 J50708 70pa 17 707-76-50040 550901-12230 50.0mm .35 kg Kobelco SK045-D,E & PC60-K A 44+100 106pa 13 201-70-64270,075 228 921 PG8 DRILLS 50.0mm 707-76-50471 PC45-1-Bush-B BF8 A CENTRE 136 39pa 16 & OLD 37452/001

B60-50X51 B60-50X52 B60-50-51 B60G50G53 B60-50-54

$ 54 $ 60 $ 42 ! $ 45 $ 44

60.05mm 60.10mm 60.13mm 60.00mm 60.05mm

50.14mm 50.15mm 50.1 mm 50.27mm 50.18mm

50.1mm Komatsu PC45-BUSH-F SK045-A,F 0F8 C 18 4pa 12 Code 50.0mm .35 kg Kobelco SK060-Bush-I O/B F8 C 7 14pa 17 TL6-9CD5-716 51.0mm $ REDUCED $ Matbro 502585 C 4 discontinue 4pa 12 52.4mm .35 kg Case 180427A1 C 11 5pa 13 54.1mm Case 580SK-Bush-D,HDL C 52 8pa 9

B60G50G54 B60-50-55 B60G50G55 B60-50-56 B60G49G56

$ 43 $ 47 $ 48 $ 42 $ 28

60.05mm 60.10mm 60.06mm 60.11mm 60.07mm

50.13mm 50.15mm 50.15mm 50.13mm 49.73mm

54.0mm 55.0mm 54.9mm 56.0mm 56.0mm .38 kg

B60G50G59 B60G50G60 B60G50X60 B60G50G61 B60G50G64

$ 49 $ 50 $ 56 $ 36 ! $ 45

60.05mm 60.05mm 60.05mm 60.10mm 60.11mm

50.13mm 50.13mm 50.16mm 50.22mm 50.12mm

59.3mm 60.0mm 60.0mm 61.0mm 63.0mm

B60G50X65 B60-50-70 B60G50G70 B60G50X70 B60G50X74

$ 66 $ 50 $ 50 $ 56 $ 52

60.07mm 60.11mm 60.13mm 60.14mm 60.07mm

50.18mm 50.13mm 50.13mm 50.16mm 50.12mm

64.8mm .45 kg PC45-BUSH-A 20T-70-71140 C 40 30pa 21 J50428 70.0mm .50 kg Matbro Was 60.13 Dia 503971 C 8 +40 J50821 27pa 17 Bushes and Pins 70.0mm . 49 kg 707-76-50371 WA120-BUSH-E C 35 14pa 18 Orig: 60.09x50.18x69.8 K$168

Seals and Shims 70.0mm .50 kg Matbro 37452/012 C 30 6pa 18

Cutters and Tools 74.3mm Kobelco SK060-BUSH-HR BF8 D 9 3pa 21

D127542 C 13+40 J50821 38pa 10 R85884 D 10 4pa 7 D150608 D 19 10pa 11 Plain Bush C 137 8pa 8 D137345 C 14 6pa 7

Was 50.26Ø FITS TRUNION 580 SLE = 60-50-33

14pa 12 91pa 10 72pa 10 18pa 11 45pa 11

6 Pack: No. 5

Harrybilt

Case=60.00mmRhino RJ Rail

$ 86.00 / 6

20T-70-71250, 352811-11140 K5 CENTRE INT.GR

075 215 921=B60-50x50 PG 58

ORIG.=59.98 D138047 60.00 x 50.21

Furukawa 352831-11130 C 2 10pa 10 To Discontinue Kubota KX161-Bush-F C 18 4pa 14 BUSHINGS Furukawa 352831-11130 C 21 2pa 13 USE FOR Quantity Discounts Available only uponFurukawa request provided all outstanding invoicesPAGE 4 Matbro Was 60.13 Dia 33948/005 D 23 9pa 10

MATBRO are settled John Deere R97724 D 8 0pa within 8 7 Days Discount for 10 or more of any line item $3.00 ea

Discount or more 14. of any .39 kg Sandvik 20797408 A 203 +200 for 20 321pa 50 line item S’vik$5.00 = 59.0ea long $75 Discount for 30 or more of any line item $7.00 ea .39 kg Kobelco SK045-Bush-C A Discount 156 for 50164pa 15 IHI 975 228 or more of any line item $9.00 ea 423 .38 kg Yanmar VI050-BUSH-B,C BF8 A 68 42 19 ^=60.08x50.20x59.4 .39 kg $ REDUCED $ John Deere R82074 C 32 0pa 9 37452/010 .45 kg Matbro 34964 C 21 6pa 16 341611-15120 = B60-50G64

Bushes for 50mm Diameter Shaft Continued next Page...

Dimensions shown are for the KSet Bush, not for nearby OEM numbers

KSet Engineers design bushes to suit market requirements PRICES DO NOT INCLUDE GST SUBJECT TO CHANGE Example: A neaterNOTICE fit to shafts and pins.

PRICES ARE WITHOUT

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

Minimum Product Order $150 Prices subject to change without notice

Discount for 10 or more of any line item $3 Discount for 20 or more of any line item $5 Discount for 30 or more of any line item $6

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 12 September 2015

Case Hardened Bushes - Precision Ground

KSet Part No. Price Outside

Inside

Suit 50mm Diameter Shaft Locations Stock Usage Mfr 10-06-2015 $ 4,325

Length Manufacture Notes

EX GST

B60-50X75 B60G50X75 B60G50X75+ B60G50G98 B61G50X50

$ 60 $ 70 $ 70 $ 76 $ 50

60.11mm 60.12mm 60.12mm 60.10mm 61.12mm

50.18mm 50.10mm 50.19mm 50.30mm 50.20mm

74.6mm .49 kg 75.0mm .49 kg 75.0mm .49 kg 98.0mm .69 kg 50.0mm

Yanmar VI0 50-BUSH-A,F O/BF8 C 26 Frequently 8pa 21 Asked Questions: 3CFR EXT AT OPEN Tight Clearance Matbro 37452/011 B 17 19pa 21 Where can I buy Quality Aftermarket Note! + Extra Clearance DPins 8 and3pa 18 Bushes for Tamrock TB40, TB60 Drill Rigs ?

John Deere T76309 A 81 83pa 23 New Matbro 37452/001 C 6+24 KSet 8pa 15 Engineering Pty LtdJ50807

B61G50G60 B62-50-50 B63-50-24 B63G50G50 B63-50X52

$ 50 $ 64 $ 40 $ 48 $ 50

61.05mm 62.10mm 63.07mm 63.05mm 63.05mm

50.13mm 50.16mm 50.07mm 50.12mm 50.07mm

60.0mm .44 kg 50.0mm 23.5mm . 21 kg 50.0mm . 45 kg 52.0mm .46 kg

Hard Bush House Greasable D 26 9pa 13 EX STOCK. Available TESK 2006 Plain Bush C 21 24pa 10 Overnight Delivery Australia-Wide !

TESK 2003 Plain Bush C 26 9pa 9 $ REDUCED $ Greasable C 30 10pa 13 $ REDUCED $ Greasable C 15 2pa 11

B63G50G75 B65-50G35 B65G50G45 B65G50X47 B65-50G48

$ 48 $ 38 $ 48 $ 48 $ 44

63.05mm 65.07mm 65.11mm 65.10mm 65.06mm

50.12mm 50.15mm 50.14mm 50.15mm 50.15mm

75.0mm .70 kg 35.0mm .37 kg 45.0mm .45 kg 47.0mm . 46 kg 48.0mm . 49 kg

B65-50X48 B65-50-55 B65F50X56 B65-50-60 B65G50G60

$ 56 $ 58 $ 88 $ 60 $ 62

65.05mm 65.13mm 65.10mm 65.07mm 65.11mm

50.15mm 50.11mm 50.18mm 50.11mm 50.15mm

47.8mm . 50 kg 55.0mm . 59 kg 56.0mm 60.0mm .65 kg 60.0mm .63 kg

BURR $ 48.00 ea TESK 2001 Greasable Bush CCARBIDE 29 2pa 19 Case W14B-BUSH-J L112479 B9.5 84Dia Oval 8pa 11 CASEplus LOADER P/No. L112479 GST TESK 2011 Greasable Bush C6mm 33 Dia5pa 13 Shank Kobelco SK060-BUSH-K C 34 16pa 15 BF8, 9mm WIDE EXT 201-70-22141 PC75UU-BUSH-I C 10 9pa 12 Code: TL-SE-3MDC 201-70-72210 PC60UU-BUSH-I C 26 8pa 14 OF8 PC60-7 Matbro 502550 C 26 8pa 15 Kobelco SK060-BUSH-J C 9 6pa 35 F95 page135 O/No 6187 TESK 2007 Plain Bush C 28 1pa 16 TESK 2004 Greasable Bush C 51 17pa 18 502551=B65G50-59 PG48

B65G50G65 B65-50-65 B65G50G70 B65F50X73 B65G50G75

$ 58 $ 48 $ 64 $ 120 $ 65

65.11mm 65.13mm 65.13mm 65.04mm 65.08mm

50.15mm 50.11mm 50.11mm 50.21mm 50.13mm

65.0mm .65 kg 65.0mm 70.0mm .72 kg 73.0mm .88 kg 75.0mm .78 kg

TESK 2012 Greasable Bush B 22+36 24pa 19 Matbro 501701 C 29 8pa 16 Matbro 501707 B 35 22pa 21 20X-70-22140 PC60,75UU-BUSH-J C 6 9pa 30 Matbro 502582 C 16 6pa 20

Hardened & Precision Ground Bushings

F86x6F76x9R65x8pg83

Pack; 14pa 27 SK060-BUSH-G C631 501712, 502994 CCarbide 14 2pa 25 Dimensions Burrs $ 248.00 /changedNov’14 6 6mm Dia Shank 24.0mm Case 580K G108689 Z 18 0pa Recess 59.9Ø X 4.5mm TL6-SE-3MDC 30.0mm 580SK-BUSH-H,R G108525 Z 11 0pa Recess 59.9Ø X 4.5mm SLE

40.0mm .48 kg Case 580SK-Bush-D,C C 16 0pa 14 46.0mm 580SK-BUSH-D,E,G G108417 Z 10 0pa 8 1 REC 60x4.5 580SLE

B65G50X84 $ 78 65.08mm 50.13mm 84.0mm .80 kg Kobelco B65G50G95 $ 70 65.11mm 50.13mm 95.0mm Matbro B67-50R24 B67-50R30 B67-50-40 B67-50R46

$ 20 $ 30 $ 40 $ 36

2.625” 2.625” 2.625” 2.625”

50.20mm 50.20mm 50.20mm 50.20mm

Heavy Wall Bushes for 50mm Diameter Shaft KSet Part No. Price

EX GST

Outside

Inside

Length

Manufacture Notes

Locations

BUSHINGS

B70-50-26 B70-50R30 B70-50-34 B70-50-36

$ 45 $ 30 $ 30 $ 46

70.01mm 70.00mm 70.01mm 70.00mm

50.18mm 25.6 50.20mm 30.0 50.18mm 34.0 50.20mm 36.0

mm .37 kg mm mm .51 kg mm

580SK-BUSH-IA Case 580K 580SK-BUSH-EX Case 580K

D141249 C 26 0pa 11 580SLE Quantity Discounts Available only upon provided all outstanding1 REC invoices D135075 Z request 22 0pa 60X4.5 are settled within Days 580SLE D141389 Z 1+24 2pa J505027 D141389 10 or more of any line item $3.00 ea D136574 CDiscount 18 for7pa 12 Discount for 20 or more of any line item $5.00 ea Discount for 30 or more of any line item $7.00 ea B70-50R38 $ 30 70.00mm 50.26mm 38.0 mm Case 580K D127196 Z 12 0pa 1 REC 60X4.5 B70-50R40 $ 32 70.00mm 50.26mm 40.0 mm Case 580K E176155 Z 20 2pa 1 REC 60X4 B70-50-45 $ 38 ! 70.05mm 50.18mm 45.0 mm .68 kg Case Hardened Plain Bush N +16 0pa J50502 B70G50G50 B70-50-54 B70-50G60 B70G50G60 B70-50-78

$ 58 ! 70.05mm $ 48 70.01mm $ 50 70.05mm $ 58 70.05mm $ 60 70.00mm

50.15mm 50.0 50.19mm 54.0 50.15mm 60.0 50.15mm 60.0 50.20mm 78.3

mm mm .81 kg mm .89 kg mm mm

$ REDUCED $ Greasable Bush C 35 6pa 17 580SK-Bush-D,E,G D137217 D 27 0pa 18 D137217 580SLE Pins and Bushes TESK 2007 Internal Groove C 26 4pa 12 Sold 40 in 2010 TESK 2011 Greasable Bush C 21 Shims 0pa 12 and Seals 580SK-BUSH-C D145080 C 16 Tools 6pa 18 and Cutters D145080 580SLE

Quantity Discounts Available Only upon

Dimensions shown are for the KSet Bush, not for nearby OEM numbers

KSet Engineers design bushes to suit market requirements PRICES DO NOT INCLUDE GST SUBJECT TO CHANGE Example: A neaterNOTICE fit to shafts and pins.

PRICES ARE WITHOUT

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

Minimum Product Order $150 request provided all outstanding invoices Prices subject to change are settled withinwithout 7 Daysnotice

Discount for 10 or more of any line item $3 Discount for 20 or more of any line item $5 Discount for 30 or more of any line item $6

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 13 September 2015

Case Hardened Bushes - Precision Ground

KSet Part No. Price

EX GST

Outside

Inside

Suit 2 inch Diameter Shaft Locations Stock Usage Mfr 6-07-2015 $ 4,372

Length Manufacture Notes

B57G51G32 $ 36 2.252” 2.003” 1.25” .13 kg TESK 2006 Greasable Bush C 2+40 37pa 10 B57-51-45 $ 38 2.252” 2.007” 1.75” .19 kg Massey Ferguson 862691M1 A 52+70 90pa 12 Frequently Asked Questions: M8043 B57G51G45 $ 42 2.252” 2.004” 1.75” .18 kg TESK 2011 Greasable Bush C 30 Where8pa 12 Quality Aftermarket can I buy Bushes for Tamrock TB40, TB60 B57-51-50 $ 42 2.252” 2.005” 2.00” .21 kg TESK 2011 Plain Bush C Pins 21 and 12pa 13 Komatsu Blue Drill Rigs ?

B57G51G57 $ 50 2.252” 2.003” 2.25” .24 kg TESK 2000 Greasable Bush C 51 10pa 14 Engineering Pty Ltd B57G51G64 $ 56 2.252” 2.004” 2.50” .26 kg TESK 2011 Greasable Bush C 8+20 KSet 9pa 14 J50821 Hardened & USE EN 65 x 50 not EN 60 x 50!

Precision Ground Bushings B60-51-22 $ 24 2.377” 2.007” 0.88” .14 kg CASE1155D Plain Bush C 36 24pa 9 EX STOCK. Available Delivery Australia-Wide !

B60-51-32 $ 35 2.377” 2.007” 1.25” .20 kg TESK 2000 Plain Bush C 46 Overnight 8pa 11 JN40730 B60-51-38 $ 36 2.377” 2.007” 1.50” .24 kg TESK 2000 Plain Bush A 35 10pa 12 B60G51G38 $ 30 2.377” 2.007” 1.50” .23 kg TESK 2011 Greasable Bush D 10 6pa 11 Reflex Blue B60-51-44 $ 34 2.377” 2.006” 1.74” .28 kg TESK 2010 Plain Bush D 21 0pa 13 TESK 2011 Greasable Bush .31 kg $ REDUCED $ CAT 953 Bearing .32 kg T E S K 2 0 1 0 Greasable Bush .32 kg John Deere T41953 .27 kg

BURR $ 48.00 ea C CARBIDE 12 8pa 13 9.5 Dia Oval plus GST D 53 4pa 13 Shank C 6mm 28 Dia4pa 14 D 30 6pa 9 Code: TL-SE-3MDC D 2 0pa C 30 10pa 14 C 13 8pa 14 FULL SIZE12W Ext 6Int 2.5x450 Int O.E D Shown 18 0pa C 16 8pa 15 12W Ext 6Int 2.5x450 Int O.E

B60G51G44 B60-51-50 B60G51G50 B60G51G51

$ 32 $ 26 ! $ 40 $ 18

2.377” 2.377” 2.377” 2.365”

2.006” 2.006” 2.006” 1.997”

1.75” 2.00” 2.00” 2.00”

B60-51-51 B60G51G60 B60G51G64 B60G51G69 B60G51G86

$ 20 $ 48 $ 40 $ 24 ! $ 38

2.365” 2.378” 2.378” 2.380” 2.380”

2.009” 2.006” 2.006” 2.009” 2.009”

2.01” .32 kg 2.37” .38 kg 2.50” .41 kg 2.74” 4:6:23.5 3.37” 2:6:32

B64-51-19 B64-51-22 B64-51-25 B64-51-26 B64F51-26

$ 28 $ 38 $ 36 $ 30 $ 44

2.501” 2.501” 2.502” 2.502” 2.501”

2.009” 2.009” 2.004” 2.007” 2.004”

0.74” 0.88” 0.98” 1.00” 1.00”

.17 kg

D33659 D33678 A2U130-194385 Plain Bush A2U130-194392

B64-51-28 B64-51-29 B64-51-32 B64F51-32 B64G51G33

$ 28 $ 34 $ 36 $ 46 $ 30

2.500” 2.501” 2.501” 2.502” 2.505”

2.007” 2.009” 2.009” 2.003” 2.009”

1.12” .25 kg 1.13” 1.25” .27 kg 1.26” .25 kg 1.30”

Case 590 Bush 135249A1 Case 1155D Bush D38943 Case D30756 Eimco A2U220-194400 F71.5x4.19 Cat 2G8635

B64G51G34 B64-51-35 B64G51-35 B63F51-35 B64-51G36 B63-51-37

$ 30 $ 32 $ 36 $ 16 ! $ 30 ! $ 24

2.505” 2.501” 2.503” 2.493” 2.503” 2.490”

2.009” 2.009” 2.008” 2.006” 2.002” 2.000”

1.32” .31 kg 1.38” .33 kg 1.37” .31 kg 1.38” 1.42” .34 kg 1.50” .34 kg

TESK 2004 Greaseable Bush Case D43946 Was B63-51-35 3G4704, 6S3459 Cyl Brg 4 holes $ REDUCED $ T58218 Flange Bush DMS 2011 Internal Groove John Deere U43635

D 621 Pack; 5pa 8 D 28 6pa 8 Carbide Burrs $ 248.00 / 6 C 12+70 50pa 10 J50806 Shank B 6mm 17 Dia 11pa 11 2.816”x0.16”) 4140 no H.T D TL6-SE-3MDC 2 0pa 11 2G8635 1.304”Long CE 12.55

C 38 19pa 11 B 56 22pa 11 C 2pa K,S, 3x15deg Int 1 x 45 Z 24 0pa F=70X5 C 61 4pa 11 DMS -Steer Cyl-Piston End G10w D 19 0pa 8

B64-51-37 B64-51-38 B64G51G38 B64-51-39 B63G51G39

$ 38 $ 29 ! $ 40 $ 30 ! $ 22

2.500” 2.501” 2.502” 2.502” 2.490”

2.006” 2.009” 2.007” 2.006” 1.997”

1.50” 1.50” .34 kg 1.50” .32 kg 1.50” .34 kg 1.54” .33 kg

Case 135248A1 Case D31142 TESK 2000 Greasable Bush TESK 2007 Plain Bush John Deere 670B 672B T82886

14 2pa BUSHINGS C 8 580 SUPER L 73 Quantity2pa Discounts C 9 Available only upon 21 request 0pa provided D 12 all outstanding invoices

are settled within 7 Days A 10 +50 42pa 12 Discount for 10 or more of any line item $3.00 J50806 ea Z 4 Discount for0pa 20 or more of any line item $5.00 ea

B64-51-40 B63-51-41 B64G51G42 B64-51G43 B64G51G44

$ 26 ! $ 22 $ 30 $ 28 ! $ 40

2.502” 2.490” 2.502” 2.503” 2.504”

2.007” 1.997” 2.007” 2.002” 2.008”

1.59” 1.59” 1.63” 1.69” 1.75”

.36 kg

$ REDUCED $ CAT 966 Bkt 6K4076 John Deere T42509 TESK 2000 Greasable Bush DMS 2011 Internal Groove TESK 2013 Greasable Bush

C 18 10pa 13 Z 3 0pa C 22 0pa 13 D 62 0pa C 16 2pa 13

John Deere 770B, 772B R98953 CAT Grader Greasable Bush CAT Grader Greasable Bush $ REDUCED $ Cat 2G-8738 Caterpillar 2G-7106

Case 1155D Case .22 kg Eimco .23 kg TESK 2003 .25 kg Eimco .20 kg

.38 kg .36 kg .36 kg .38 kg

Bushes for 2 inch Diameter Shaft continued next page

Dimensions shown are for the KSet Bush, not for nearby OEM numbers

KSet Engineers design bushes to suit market requirements PRICES DO NOT INCLUDE GST SUBJECT TO CHANGE Example: A neaterNOTICE fit to shafts and pins.

PRICES ARE WITHOUT

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

D 25 C 10 B 228 B 18 A 70

4pa 7 20pa 7 24pa 8 AndersonDrg:63.55x50.85x25 31pa 8 Coalroc: B64F51-26 isA2U130-194392 24pa 11 F71.5x4.25 Y63.4x3 Orig 32 HRC

Discount for 30 or more of any line item $7.00 ea

CE $10.35,MFR 12.30

DMS Steer Cyl-Rod End, G10w

Pins and Bushes

Shims and Seals Tools and Cutters

Minimum Product Order $150 Discount for 10 or more of any line item $3 Prices subject to change without notice

Discount for 20 or more of any line item $5 Discount for 30 or more of any line item $6

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 14 September 2015

Bushings - Hardened Steel - Precision Ground

Suit 2 inch Diameter Shaft Locations Stock

Usage Mfr 25-08-2015 $ 3,742

KSet Part No. Price Outside

Inside

Length Manufacture Notes

B64-51-45 B64-51G48 B63-51-51 B64-51-52 B63-51G51

$ 42 $ 24 ! $ 28 $ 48 $ 28

2.503” 2.503” 2.490” 2.502” 2.490”

2.006” 2.007” 2.010” 2.007” 2.000”

1.75” . 40 kg 1.88” . 36 kg 2.00” 2.00” . 46 kg 2.01” . 46 kg

B64G51G51 B64-51-54 B64-51G59 B64-51-60

$ 52 $ 40 $ 36 $ 48

2.502” 2.501” 2.504” 2.502”

2.007” 2.009” 2.007” 2.006”

2.00” . 44 kg 2.13” 2.34” . 36 kg 2.37” . 54 kg

B64G51G60 B64G51G63 B64-51G63 B64G51G70 B64G51G76

$ 49 $ 50 $ 34 $ 50 $ 56 !

2.503” 2.502” 2.502” 2.502” 2.502”

2.007” 2.007” 2.006” 2.008” 2.010”

Case D33032 A 33+40 32pa 15 CASE 1155D D 6 4pa 13 SUIT PIN R48922 CAT 950-BUSH-Lever 7K0087 C 18 11pa 10 CE$9.76 TESK 2009 Plain Bush B Deburring 14+30 Tool 19pa 16 $ 9.00 ea Non-Replaceable Blade plus GST 2.37” CAT 955L Bucket 7K9549 B 18 13pa 18 Mfr $18 CE $25 2.50” . 55 kg TESK 2000 Greasable Bush A Code: 76 TL-DT-1-2 19pa 16 2.48” Caterpillar Bearing 2K4509 C 21 8pa 15 CE $9.14 mfr 17.50 2.75” . 61 kg TESK 2003 Greasable Bush B 27+60 72pa 17 J50806 3.00” . 66 kg TESK 2006 Greasable Bush C +26 20pa 17 J50618

B64G51G79 B64F51G87 B64G51G89 B64G51G101

$ 48 $ 99 $ 64 $ 60

2.503” 2.500” 2.501” 2.504”

2.009” 2.006” 2.004” 2.008”

3.11” T 4x6 CAT936Bkt/Link 4V2873, 4V3619 C 62+26

13$pa 19/ 6 Pack; 44.00 3.44” Flange Bush F76.2x4.75 C Deburring 35 0pa Tool 40 3.50” TESK 2007 Greasable Bush C Code: 16 TL6-DT-1-2 3pa 18 4.00” . 89 kg Standen Was B63G51G101 C 20 12pa 20

EX GST

B65G51X54 $ 56 65.08mm 2.005” B65G51X76 $ 70 65.08mm 2.005” B65-51X100 $ 90 65.09mm 2.010”

Frequently Asked14 Questions: TESK 2012 Was B63-51-45 B 13Where +30 16pa 3J3185 CE Don’t do it in Queensland can I buy CAT950-Bush-Top-L 7K0084 C 17 Pins - Bushes 0pa - 11 Seals 7K0084 CE$10.23 Dust John Deere T25877 D 1 for Kobelco -0pa

10 in 1 lot 2011 Komatsu8Excavators?

TESK 2001 Plain Bush B 23+50KSet Engineering 28pa 14 Pty Ltd J50618 Hardened Bushings Seals John Deere T34423 C 11 4pa 14- Wiper

Available EX STOCK. Overnight Delivery to QLD - WA - TAS

2.12” . 53 kg TESK 3.00” . 74 kg TESK 3.94” .99 kg MMW

Internal Figure 8 Groove D 31 2pa 22 Internal Figure 8 Groove C Sterling 28 14pa 24 Internal Figure 8 Groove B 8+29J50807 50pa 30

CE $19.91 40 to Pacific Mchy Was B63G51G89 M00097, Standen

Mick Murray =2.011”

Heavy Wall Bushes for 2” Diameter Shaft KSet Part No.

P rice Outside

B70-51-39 B70-51-41 B70-51-45 B70G51G51

$ 42 $ 44 $ 46 $ 54

2.753” 2.752” 2.753” 2.752”

B70-51-60 B70-51-61 B70-51-63 B70G51G76

$ 60 $ 58 $ 55 $ 70

2.751” 2.752” 2.752” 2.752”

B76-51-39 B76-51-60 B89R51G48

Length

Manufacture Notes

2.009” 2.013” 2.010” 2.006”

1.50” . 55 kg 1.61” . 57 kg 1.75” 2.00” . 70 kg

TESK 2008 Plain Bush C 1+54 Case D50698 C 20 CatD9R Bearing,Blade C 35 TESK 2001 Greasable Bush C 9

2.010” 2.010” 2.010” 2.010”

2.36” . 85 kg Case D91241 C 38 0pa 18 2.37” . 86 kg CatD9R Bearing,Blade D 10 0pa 2.50” . 90 kg TESK 2001 2009 Plain Bush D 4+14 1pa 18 J50502 BUSHINGS 3.00” 1. 03 kg TESK 2009 Greasable Bush C +14

10pa 19

Quantity Discounts Available only uponJ50502

$ 50 3.002” 2.006” $ 70 3.002” 2.006” $ 50 3.500” 2.023”

are settled 1.50” . 76 kg O.S. TESK 2006 2010 Plain Bush C 5 0pa within 14 7 Days for 6 or more 2.37” 1. 20 kg O.S. TESK 2001 2010 Plain Bush C Discount 4 0pa of any 16 line item $3.00 ea more of any line item T113331 $5.00 eaPG.47 1.88” With Seal Recesses T113331 Z Discount 6 for 10 or 0pa

EX GST

Inside

Locations 52pa 0pa 0pa 23pa

13 11 14 16

Sold 30 in November14

Was B70g51g52

request provided all outstanding invoices

Discount for 20 or more of any line item $8.00 ea

Bushes and Pins

Seals and Shims

Cutters and Tools Quantity Discounts Available Only upon Minimum Product Order $150 provided outstanding request Prices subject to all change without invoices notice are settled within 7 Days Discount for 10 or more of any line item $3 Discount for 20 or more of any line item $5 Discount for 30 or more of any line item $6

Dimensions shown are for the KSet Bush, not for nearby OEM numbers

KSet Engineers design bushes to suit market requirements PRICES DO NOT INCLUDE GST SUBJECT TO CHANGE Example: A neaterNOTICE fit to shafts and pins.

PRICES ARE WITHOUT

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 15 September 2015

Bushings - Hardened Steel - Precision Ground Suit 55mm to 2.25” Diameter Shaft KSet Part No. Price

Outside

Inside

$ 36 $ 36 $ 38 $ 48 $ 40 $ 60

60.05mm 65.10mm 65.10mm 65.05mm 65.10mm 65.10mm

B65-55-50 B65G55G50 B65G55G51 B65-55-55 B65G55G65 B65-55X65

$ 48 $ 54 $ 40 ! $ 44 $ 68 $ 50

B65G55X65 B65G55G67 B65G55G75 B65G55G76 B65G55G82

Locations Stock Usage Mfr 24-08-2015 $ 4,767

Length

Manufacture Notes

55.10mm 55.15mm 55.15mm 55.07mm 55.14mm 55.15mm

20.0mm 26.0mm .20kg 35.0mm .26kg 40.0mm .29kg 44.4mm .33kg 45.0mm .34kg

Thin Wall Plain Bush Case Back Hoe Plain Bush Massey Ferguson Plain Bush Sandvik 34483978 4x3mm Holes TESK 2009 Plain Bush Kubota KX045-BUSH-F O/BF8

N+20 J50707 8pa McColl Eng D 22 2pa 8 Peter Gardner PFERRD Fan9 Grinders - 6mm Shank C 34 6pa M8072 - 120 Grit A 78 Aluminium 14pa 13 Oxide Maspro4mmWgrooves Complete range available B 18 5pa PFERRD 12 C 16 2pa Bulk17 orders available

65.10mm 65.10mm 65.10mm 65.10mm 65.07mm 65.10mm

55.17mm 55.17mm 55.15mm 55.10mm 55.20mm 55.13mm

50.0mm .36kg 50.0mm .35kg 51.0mm 55.0mm .39kg 65.0mm .46kg 65.0mm

TESK 2004 Plain Bush TESK 2007 Greasable Bush $ REDUCED $ R97726 John Deere T67855 John Deere R82076 1 Bush only Internal Groove

C 32 C 36 D 12 D 14 C 27 D 1

6pa 13 9pa 15 KSet Popular Selection 0pa Discontinue, use B65g55g50 2pa 14 1pa 17 0pa

$ 78 $ 47 $ 83 $ 78 $ 68 !

65.10mm 65.07mm 65.07mm 65.07mm 65.07mm

55.13mm 55.12mm 55.12mm 55.20mm 55.30mm

65.0mm .47kg 67.0mm 75.0mm .55kg 76.0mm .55kg 82.0mm

Kobelco SK045-BUSH-B John Deere H144296 John Deere R84378 John Deere R82077 $ REDUCED $ R82075

C 22 C 11 C 27 D 5 D 10

5pa 23 5pa 17 7pa 19 2pa 19 0pa

B68-55G45 B68G55G45 B68G55G50 B68-55X55 B68G55G55 B68G55X65

$ 52 $ 54 $ 40 ! $ 62 $ 50 $ 74

68.08mm 68.08mm 68.05mm 68.05mm 68.05mm 68.06mm

55.13mm 55.07mm 55.08mm 55.10mm 55.07mm 55.12mm

44.8mm 44.8mm 50.0mm 54.8mm 55.0mm 65.0mm

.43kg .43kg .47kg .52kg .64kg .64kg

WA470-Bush-S-Cyl 707-76-55520 WA470-Bush-S-Rod 707-76-55120 $ REDUCED $ PC16 MR-2 PC60-7-BUSH-D BF8 $ $ REDUCED $ $ Takeuchi 00024-00075 TB135-Bush-A

B 22 12pa 14 cyl end C 33 4pa 15 707-76-55120 rod end D 26 0pa 16 To Discontinue C 6 Size 6pa 22 Code 707-76-55180 + Cntr groove Price C 50 6 Dia x 3pa 12 Mistake O/No. 7878 30 w TL-F5030/6 A120 $ 9 D 8 4pa 22 Takeuchi 3tonne

B70-55-26 B70-55-36 B70G55G55 B70G55G70 B70G54G98 B70-56X65 B70-56X85

$ 41 $ 39 $ 74 $ 78 ! $ 48 $ 102 $ 110

70.12mm 70.12mm 70.05mm 70.05mm 70.13mm 70.10mm 70.10mm

55.20mm 55.20mm 55.10mm 55.18mm 54.76mm 56.4 mm 56.4 mm

Dia x30pa 50 w 12 TL-F8050/6 $ at15a time 25.4mm .30kg TESK 2013 Plain Bush B 80 50 PeterA120 Gardner 10 36.0mm TESK 2007 Plain Bush C 5 4pa 12 Plus GST 55.0mm .61kg TESK 2008 Greasable Bush C 25 16pa 15 B70G55X49 = 404 326 70.0mm . 80kg Yanmar Greasable Bush C 49 21pa 20 70F55X47 = 404 333 98.0mm 1.12kg John Deere T105677 Z 17 0pa Where are they? Gosf?

65.0mm .67kg Komatsu 141-78-11311 D 1 2pa 16 BF8 D65E-8 “R” Ripper 85.0mm .89kg Komatsu 141-78-11321 D 7 Frequently 2pa 16 Asked BF8Questions: D65E-8 “R” Ripper

EX GST

B60-55-20 B65-55-26 B65-55-35 B65G55G40 B65-55-44 B65-55X45

KX045-BUSH-A:B65-55X65

To Discontinue

60 Dia x 40 w TL-F6040/6 A120 $ 11

Where0pa can I buy 120 Quality B65-57-43 $ 58 65.10mm 57.15mm 43.0mm Claas Light Wall Bush C 15 in oneAftermarket batch Jeremy Weeks - Bushes Seals for IJ2192 B67-57-39 $ 50 2.629” 2.267” 1.54” Modified IJ2192 C 2 Pins 18pa 14 - Dust TEFOL MODIFIED B67-57-50 $ 58 2.630” 2.267” 1.97” .39kg Modified IJ2192 C 26 Kobelco 0pa SK80 15 MSR Excavators?

Pty Ltd MDS Modify B67-57-55 $ 48 2.630” 2.267” 2.16” Caterpillar D11 Lift Cyl C 31 KSet 8pa Engineering 14 B67-57-76 $ 56 2.630” 2.267” 3.00” .58kg Caterpillar D11 Nose Cone C 40 8pa Bushings 21 1J2192 $136 A/MARKET Hardened - Wiper Seals

Use EN 70 x 57: Available EX STOCK. B70-57-24 $ 27 2.743” 2.260” 0.95” John Deere U17170 Z 8 0pa TO DISCONTINUE Overnight Australia-Wide !

B70-57-26 $ 36 2.754” 2.256” 1.00” TESK 2003 Plain Bush C 18 1pa Delivery 9 B70-57-28 $ 30 2.751” 2.260” 1.13” CASE 1155D D52579 D 11 4pa 9 B70-57-30 $ 30 2.755” 2.257” 1.18” CASE 580K D127167 D 27 10pa 10 B70-57-32 $ 50 2.754” 2.257” 1.25” .32kg Eimco 913 3059243 B 30 2pa 11 STEP 2.743”ø x 3mm B70-57-38 $ 52 2.754” 2.256” 1.50” .38kg Previous Par t B70-57-37 B 29 DISCOUNT 18pa 12 FOR QUANTITY

B70-57-41 B70-57-48 B70-57-50 B70G57G51 B70-57-54

$ 40 ! $ 40 $ 60 $ 66 $ 60

2.754” 2.753” 2.752” 2.752” 2.752”

2.257” 2.260” 2.259” 2.256” 2.259”

1.63” 1.88” 1.97” 2.00” 2.12”

.41kg .49kg .49kg .50kg .55kg

$ REDUCED $ Eimco 913 3059268 CAT950-BUSH-D,E Plain Bush CAT980G-PIN-S Plain Bush TESK 2005 Greasable Bush CAT 953 Bearing

B70-57-57 B70G57G60 B70-57-63 B70-57G63 B70-57-70 B70G57G70

$ 56 ! $ 76 $ 76 $ 50 $ 82 $ 82

2.754” 2.753” 2.754” 2.752” 2.754” 2.753”

2.257” 2.257” 2.256” 2.261” 2.256” 2.257”

2.25” 2.37” 2.50” 2.50” 2.75” 2.75”

.57kg .58kg .59kg .64kg .68kg .68kg

$ REDUCED $ Eimco 913 3059276 TESK 2009 Greasable Bush TESK 2013 CAT 988B Steering Eimco 913 3059250 TESK 2004 Greasable Bush

B75G57X99 $ 128 75.10mm 57.15mm 99.4mm 1.44kg Claas Greasable Bush B76-57-43 $ 52 3.001” 2.260” 1.70” Case D90722 B76-57-54 $ 52 3.002” 2.256” 2.12” .87kg Caterpillar 6K2702 B76-57-70 $ 78 ! 3.002” 2.258” 2.75” 1.12kg $ REDUCED $ Plain Bush B76-57R125 $ 84 2.999” 2.250” 4.9” 3 Only Recessed ends B79G57G70 $ 110 3.126” 2.257” 2.75” O.S.TESK Greasable Bush Dimensions shown are for the KSet Bush, n ot for nearby OEM numbers

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

BUSHINGS

A 63 2pa 13 Available STEP 2.743”ø x 3mm Quantity Discounts only upon D 10 2pa 14 7J9699 CE$12.56 request provided all outstanding invoices C 34 8pa 16 within 7 Days 8P0420 are settled B 24 26pa 17 Discount for 6 or more of any line item $ 5.00 ea C Discount 24 10pa for 10 or16 more of any line item $ 8.00 ea

20 or16 more of any line item2.743”ø $10.00xea A Discount 105 for6pa STEP 3mm C 19 11pa 17 4V8643 C 24 4pa 18 DmhSringhatsAusdrillRigs D 12 7pa 16 CE $15.50 9J5875 C 50 10pa 19 Step2.743”ø x 3mm C 14 Pins 4pa and 20 Bushes

D 9 Shims 2pa 20 and 50 for Jeremy Weeks Seals D 11 0pa Tools and Cutters C 3 2pa 17 Minimum Order $150 C 38 0pa Product 20 Prices subject to change without notice Z 2 0pa SCANFOREST D 17 0pa Disc 10 or more of any item $5 Disc 20 or more of any item $8 Disc 30 or more of any item $10

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 16 September 2015

Case Hardened Bushes - Precision Ground

KSet Part No. Price

Outside

Inside

Length

Suit 60mm Diameter Shaft Manufacture Notes

Locations Stock Usage Mfr 07-09-2015 $ 5,660

EX GST

B70G60G28 B70G60G30 B70-60-35 B70G60G35 B70-60-38

$ 52 $ 58 $ 58 $ 58 $ 65

70.14mm 70.10mm 70.07mm 70.07mm 70.07mm

60.17mm 60.15mm 60.15mm 60.15mm 60.15mm

0500 4520 03 C

Atlas Copco - QMRC 19 22pa 17 PFERRD Bushing DRubber 25 Drum 0pa Holders

Swadling Eng - 6mm Shank Complete PFERRD range available 28.0mm . 21kg John Deere T70723 C 26 12pa 8 available Bulk orders 30.0mm . 22kg Hydraulic Cylinder Bush 2009 A 25 16pa 10 35.0mm . 28kg TESK 2012 Plain Bush A 41 KSet 17pa 11

Atlas Copco - Custom Eng Popular Selection 35.0mm . 25kg Hydraulic Cylinder Bushing A 49 6pa 12 38.0mm . 32 kg TESK Plain bush 2006 B 49 6pa 12

B70G60G47 B70-60-50 B70G60G50 B70G60X50 B70G60G60

$ 56 $ 4 5 ! $ 60 $ 68 $ 68

70.07mm 70.08mm 70.07mm 70.07mm 70.07mm

60.13mm 60.13mm 60.15mm 60.11mm 60.18mm

47.0mm . 36 kg Furukawa 341811-11320 C 28 13pa 14 50.0mm $ Reduced $ Plain bush B 57 26pa 14 50.0mm . 383kg TESK Bush Greaseable B 20+60 62pa 15 50.0mm . 38kg 341811-11310 341811-11160 B 10+24 14pa 18 60.0mm . 47kg Matbro 36267 B 36 50pa 17

B70G60X60 B70F60-60 B70G60X65 B70G60G70 B70G60X75

$ 78 $ 140 $ 74 $ 78 $ 7 2 !

70.10mm 70.05mm 70.06mm 70.07mm 70.10mm

60.13mm 60.20mm 60.13mm 60.13mm 60.13mm

60.0mm 60.0mm 64.9mm 70.0mm 75.0mm

B70G60X80 B70G60G85 B70G60X90 B70G60X100

$ 68 $ 80 $ 90 $ 78

70.10mm 60.13mm 70.05mm 60.12mm 70.10mm 60.13mm 70.10mm 60.13mm

B65-60X55 $ 78 65.07mm 60.10mm 55.0mm . 22kg Atlas Copco B68-60X65 $ 4 8 ! 68.07mm 60.16mm 65.0mm $ Reduced $

B71-60X50 $ 88 B71-60X59 $ 88 B72-60X35 B72-60X36 B72G60G50 B72G60G60 B73G60X43

$ 68 $ 3 4 ! $ 72 $ 68 $ 85

B73G60G50 $ 48 B73G60X55 $ 69 B73-60X93 $ 96 B75G60G28 B75-60-30 B75-60-35 B75G60G35 B75G60G49

$ 3 0 ! $ 40 $ 50 $ 48 $ 60

Size

J50724 J50724 pg48

Code

Price

. 46kg Matbro Closed Fig.8 503621 C 56 26pa 20 J50509 pg 60 38 Dia x 25 w TL-GK3825 /6 $ 39 . 53kg Flange Bush FBL-10 Steering F80x7 C 27 8pa 26 502298Y69.7x2 305973 4501120690G 45 Dia x 30 w TL-GK4530 /6 $ 39 . 50 kg Kobelco SK045-BUSH-TD,SL B 16+44 9pa 22 CHECK I.D. Before selling 51 Dia x 25 w TL-GK5125 /6 $ 47 . 55 kg $ Reduced $ Greaseable C 15+30 21pa 20 J50724 60 Dia x 30 w TL-GK6030 /6 $ 50 . 58 kg Matbro 37452/013 A 48 8pa 24 MATBRO 503965 Plus GST

80.0mm . 61 kg Kobelco SK220-BUSH-HR C 41 24pa 26 37452/003 PAGE 60 85.0mm . 70 kg B5X Boom Cyl Bush B 12 2pa 20

PFERRD BOOM CYL.BOTH ENDS 90.0mm . 69 kg Matbro 37452/002 C 4 6pa 24 PAGE 60 Abrasive Spiral Bands - Zirconia 100.0mm . 78 kg Matbro 37452/008 D 10 0pa 29 PAGE 60 Complete PFERRD range available

Bulk orders available 71.44mm 60.01mm 50.2mm . 45 kg Eimco A2U936-194288 OF8 C 4 2pa 21 S’vik$322intHelica30 pitchY71.2 x 5 50RC 70.44mm 60.07mm 59.1mm . 48 kg Eimco A2U936-194295 OF8 D 8 2pa 23 S’vik$200IntHelix30ptch

KSet Popular Selection 72.02mm 72.02mm 72.05mm 72.05mm 73.13mm

60.08mm 60.26mm 60.15mm 60.15mm 60.15mm

35.0mm . 33 kg K&H Bush K5X15 O OF8 x 2 35.0mm $ REDUCED $ 50.0mm . 50 kg Kubota 68311-4113-0 60.0mm Kubota 68311-4112-0 43.0mm . 97 kg Kawasaki KLD85Z2 O/BF8

C 14 Z 26 C 8 D 22 C 6

12pa 19 8pa 19 0pa 16 2pa 16 6pa 21

Ainsworth,lots 16 NOT FOR AINSWORTH KX71 KX71 & 341831-11130

73.10mm 60.15mm 50.0mm TESK Bush Greaseable C 28 0pa 16 73.13mm 60.15mm 55.0mm . 57 kg KLD80Z2 -BUSH-L,K BF8 C 27 12pa 21 07E1 191 L001 73.13mm 60.15mm 93.0mm Kawasaki KLD85Z2 Bkt BF8 C 11 Size 3pa 21 1xB73G60G89 $68 73.07x60.15x89.0 Code Price 75.06mm 75.08mm 75.08mm 75.05mm 75.05mm

60.10mm 60.12mm 60.12mm 60.15mm 60.05mm

38 Dia x 25 w TL-GSB3825 Z60 $ 3.25

28.0mm . 21kg $ REDUCED $ Greaseable Bush D45 24 MistakeZ60 of B70g60g28 Dia x 30 w TL-GSB4530 $ 3.25 30.0mm TESK Plain Bush 2007 C 51 22 21pa 11

Dia x 25 w TL-GSB5125 Z60 PaliwaneStatic $ 3.50 34.8mm Hitachi EX120-BUSH-G (2) D60 13 4365897 $91 75.18x60.27x34.75 Dia x 300pa 11 w TL-GSB6030 Z80 $ 3.50 35.0mm . 27kg TESK Bush Greaseable C 19 5pa 11 D6M TRACK FRAME CALM Plus GST 49.8mm . 60 kg Komatsu WA500-BUSH-S B 28 28pa 14

To suit 60mm shaft continued next page.........

Dimensions shown are for the KSet Bush, not for nearby OEM numbers

KSet Engineers design bushes to suit market requirements PRICES DO NOT INCLUDE GST SUBJECT TO CHANGE Example: A neaterNOTICE fit to shafts and pins.

PRICES ARE WITHOUT

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

BUSHINGS

Quantity Discounts Available only upon request provided all outstanding invoices

are settled within 7 Days Discount for 6 or more of any line item $6 ea Discount for 10 or more of any line item $8 ea Discount for 20 or more of any line item $10

Quantity Discounts Available Only upon request provided all outstanding invoices Bushes and Pins are settled within 7 Days Discount for Cutters and Tools 10 or more of any line item $5 Discount for or more of Order any line item $8 Minimum20Product $150 Prices for subject change without notice Discount 30 ortomore of any line item $11

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 17 September 2015

Bushings - Hardened Steel - Precision Ground

KSet Part No. Price Outside

Locations Stock Usage Mfr 25-07-2015

Length

Manufacture Notes

60.15mm 60.15mm 60.15mm 60.12mm 60.15mm

50.0mm . 60 kg 49.9mm . 60 kg 55.0mm 60.0mm .74 kg 59.6mm . 72 kg

Komatsu PC60,75UU-BUSH-HL A 42 PFERRD 40pa 16 Economy 20X-70-24150 Rolls PC75UU-2 Komatsu PC60-BUSH-F OF8 B 29 13paPFERRD 16 Complete range 4xLinebore available Eng Kobelco SK220-BUSH-HL C 19 12pa 18 TESK Plain bush 2000 C KSet 5+30 17pa 17

Popular Selection J50725 Komatsu PC60-7-BUSH-C,E BF8 C 54 4pa 20

75.05mm 75.05mm 75.05mm 75.10mm 75.13mm

60.17mm 60.16mm 60.12mm 60.13mm 60.20mm

60.0mm . 72 kg Hydraulic Cylinder Bush 2001 B 36 23pa 18 59.8mm Komatsu PC60,75UU-Bush-HR C 76 11pa 23 07144-10606, 707-76-60080 65.0mm . 78 kg TESK 2001 B 21 8pa 17 65.0mm . 77 kg $ REDUCED $ TESK 2004 A 115 26pa 23 69.0mm Kobelco YY12B01448P1 SK135-Bush-I C 10 2pa 17 SK135SR-2-Bush-I 11wGrooves

75.10mm 75.09mm 75.11mm 75.12mm 75.10mm

60.18mm 60.20mm 60.18mm 60.23mm 60.13mm

68.7mm .83 kg Komatsu PC120-BUSH-I OF8 C 10+20 70.0mm .84 kg Kobelco SK035 Sw Frame B 7+32 70.0mm .84 kg Kobelco SK220-BUSH-J,K OF8 C 18 71.5mm 1.17 kg YW12B01036P1 SK115SR-Bush-J O/BF8 N 12 75.0mm .90 kg TESK 2011 C 6+20

B75G60X79 $ 6 5 ! 75.10mm B75G60X80 $ 5 8 ! 75.07mm B75-60X80 $ 88 75.08mm B75G60G85 $ 8 8 ! 75.05mm B75F60X87 $ 154 75.15mm

60.15mm 60.10mm 60.18mm 60.11mm 60.20mm

79.0mm . 96 kg Kawasaki KLD80Z1 BF8 C 21 2pa 27 80.0mm . 96 kg $ REDUCED $ Cylinder Bush BF8 N 37 0pa Mistake of B70g60X80 Price 80.0mm . 96 kg Kobelco SK220-BUSH-I OF8 C 10+20Size 12pa 26 Code BuyB75F60X87UKW

40 mm x 50 m TL-ER 40A 60 $ 30 85.0mm 1.03 kg TESK 2000 B 25 17pa 19 4xLinebore Eng 50 m 89TL-ER 40A 80 $ 30 86.8mm 1.84 kg Komatsu PC120-BUSH-J OF8 C 40 2 mm x8pa

203-70-42182 Pg81 UKW

B75G60X90 $ 78 75.11mm B75G60X106 $ 126 75.13mm B76G60G50 $ 68 76.25mm

60.15mm 89.8mm 1.09 kg Komatsu 60.16mm 105.9mm 1.29 kg Kawasaki KLD80Z1 BF8 C 12 60.15mm 50.0mm Imperial Outside OD = 3.002” C 16

EX GST

B75G60G50 B75-60X50 B75G60G55 B75-60-60 B75-60X60

$ 60 $ 72 $ 70 $ 70 $ 68

75.05mm 75.05mm 75.09mm 75.05mm 75.05mm

B75G60G60 $ 80 B75G60X60 $ 6 5 !

B75G60G65 $ 84 B75G60X65 $ 6 5 !

B75G60G69 $ 84 B75-60X69 B75G60X70 B75G60X71 B75F60X72 B75G60X75

$ 68 $ 90 $ 98 $ 220 $ 82

Inside

Suit 60mm Diameter Shaft $ 6,617

12pa 23 203-70-56150 OF8,5W INT. CNTR. 23pa 25 Randalls - S000240031 6pa 23 0pa 96 F113 MelbTractor$320 12pa 27 J50510

40 mm x 50 m TL-ER 40A 120 $ 30 x 50 m 31 TL-ER 40A 180 $ 30 PC120-BUSH-K OF8 C 40 23 mm 19pa

203-70-56160 - pg81

Plus GST

6pa 38 6pa 18

ORIG = B75-60x106 IMPERIAL OD 3.002”

Heavy Wall Bushes for 60mm Diameter Shaft

B78-60G106 $ 98 78.10mm B79G60X62 $ 90 79.05mm

Frequently Asked Questions: In South Africa can I buy ready-made hardened steel bushes / bushings ?

Inside Length Manufacture Notes Locations 25-07-2015

KSet Engineering Pty Ltd

has 1,25026 different size bushings 60.18mm 106.0mm 1.60 kg O.S. TESK Type U C 13 1pa

available EX STOCK. 60.15mm 62.0mm .96 kg Kawasaki KLD85Z2 BF8 D 22 2pa 26

Delivery to South Africa takes 5-6CROWD days. CYL

B80-60-40 B80G60G65 B80G60G80

60.14mm 40.0mm 60.14mm 65.0mm 60.14mm 80.0mm

KSet Part No. Price Outside EX GST

$ 60 80.10mm $ 98 80.10mm $ 99 80.10mm

B84G60N155 $ 160 84.0mm B85G60G72 $ 90 85.05mm B88G60G68 $ 102 88.12mm

0.67 kg

Plus-size O.D. Plain Bush C 38 10pa 17 Plus-size O.D. Greasable Bush B 33 17pa 20 1.33 kg Plus-size O.D. Greasable Bush C 44 4pa 28

1.08 kg

Titan Mfg J50223

60.18mm 155.0mm 1.33 kg Hardened Inside Only D 7 1pa 28 Monfort Eng 60.15mm 71.8mm 1.61 kg Sandvik Atlas 9124 8810 00 C 33 18pa BUSHINGS 28 Sandvik$190 / Goldfields Quantity Discounts Available only upon 60.14mm 68.0mm 1.74 kg Sandvik Atlas 9128 7345 00 C 8 request 6pa 29 all outstanding invoices provided

are settled within 7 Days Discount for 6 or more of any line item $5.00 ea Discount for 10 or more of any line item $8.00 ea Discount for 20 or more of any line item $10.00

Quantity Pins andAvailable Bushes Discounts Only upon

Dimensions shown are for the KSet Bush, not for nearby OEM numbers

KSet Engineers design bushes to suit market requirements PRICES DO NOT INCLUDE GST SUBJECT TO CHANGE Example: A neaterNOTICE fit to shafts and pins.

PRICES ARE WITHOUT

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

provided alland outstanding invoices requestShims Seals are settled within 7 Days

Tools and Cutters Discount for 6 or more of any line item $5 Discount Minimum Order $150 for 10Product or more of any line item $8 Prices subject to change without notice Discount for 20 or more of any line item $11

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 18 September 2015

Bushings - Hardened Steel - Precision Ground

Suit 2.5 inch Diameter Shaft

KSet Part No. Price Outside

EX GST

Inside

Stock, Usage, Mfr,

Length Manufacture Notes

Locations Stock Usage Mfr 25-07-2015 $ 5,341

B70-63X76 $ 98 70.10mm 63.12mm 76.2mm .40 kg Metric Suit 63mm Dia Pin B75G64G31 $ 43 75.06mm 64.03mm 31.0mm Metric Suit 63mm Dia Pin B75-64-65 $ 5 8 ! 75.07mm 2.506” 65.00mm $ REDUCED $ 2011

Z 3 8in2014 CAT 299 USES 8off Economy Rolls IBS Z 2 PFERRD 0pa

D Complete PFERRD range available 17 0pa 18 RANDALLS

B76-64-22 B76-64-23 B76-64-26 B76-64-31 B76-64-32

$ 2 8 ! $ 42 $ 44 $ 2 8 ! $ 4 8 !

3.000” 3.004” 3.003” 3.000” 3.004”

2.514” 2.514” 2.508” 2.506” 2.506”

0.90” 0.90” 1.00” 1.25” 1.25”

.25 kg .25 kg .28 kg .35 kg .35 kg

$ REDUCED $ Case 580K Case $ REDUCED $ $ REDUCED $

Special OD G108310 D33635 Special OD TESK

B76-64-38 B76-64-41 B76-64G44 B76G64G44 B76G64G46

$ 3 0 ! $ 38 $ 30 $ 38 $ 46

3.004” 3.006” 3.004” 3.004” 3.001”

2.506” 2.510” 2.510” 2.510” 2.506”

1.50” .42 kg 1.61” 1.75” 1.75” 1.80”

$ REDUCED $ John Deere CAT950 Caterpillar Case 1150

CAT 920 T54081 Bkt / Link 8J5778 R26633

B76-64-47 B76-64-50 B76-64G50 B76-64-51 B76G64G51

$ 48 $ 44 $ 57 $ 60 $ 62

3.004” 3.003” 3.003” 3.002” 3.002”

2.504” 2.506” 2.506” 2.506” 2.506”

1.86” 1.98” 1.98” 2.00” .54 kg 2.00” .53 kg

Eimco Caterpillar Caterpillar JOY TESK

A2U913-194031 7K9528 2K4506 1069127-224 Greaseable

C 22 1pa 16 STEP 2.98”Øx5 17HRC C 21 10pa 15 CE $14.23 C 1 0pa 11 CE $10.12 A 42 45pa 17 K5,S=0.5,Int=1.8X45°,JOY 2.507” 40HRC B 27 24pa 17

B76-64G56 B76G64G56 B76-64-57 B76-64G57 B76G64G57

$ 48 $ 50 $ 48 $ 46 $ 50

3.002” 3.003” 3.002” 3.004” 3.004”

2.506” 2.506” 2.506” 2.510” 2.510”

2.22” 2.23” .59 kg 2.25” .62 kg 2.25” 2.25” .60 kg

Caterpillar 2K4442, 7K9985 CAT988 Bucket - Top TESK Plain Bush Caterpillar Bearing 7J9732 V Ident.Groove 7K0078

D 0pa 18 Code CE $15.78 ‘09Price Mfr $18.82 1 Size B 40 22 mm x0pa 20 7

K9529,7K0078 9WextCE$20 50 m TL-ER 40A 60 $ 30 B 5+24 40 mm x8pa 50 m 17 TL-ER 40A 80 $J50725 30 C 40 1 mm x0pa

CE $20 50 m TL-ER 40A 120 $ 30 C 12 6pa 17 CE$17.08$7.20Mfr 9w groove

B76-64-60 B76-64G65 B76G64G65 B76G64G69 B76-64-70

$ 66 $ 58 $ 72 $ 60 $ 70

3.003” 3.003” 3.002” 3.004” 3.003”

2.506” 2.510” 2.506” 2.510” 2.509”

2.36” 2.56” 2.56” .69 kg 2.74” 2.75”

CAT955 Bkt/Link 5K7995 CAT 936 Bearing Standen HSB 192 CAT 980A Bkt/Link 7J9731 JOY 1069127-411

Plus GST C 16 +30 20pa 21 CE$17.33 J50725 D 12 4pa 16 7P3454 ?CE $16.26 ‘09 A 64 24pa 22

C 0+16 2pa 23 J50725 CE$20.76 17pa 20 C 29 Frequently Asked Questions: 58 HRC

B76G64G70 B76G64G75 B76-64G76 B76G64G76 B76G64G84

$ 5 6 ! $ 68 $ 4 8 ! $ 6 8 ! $ 88

3.002” 3.003” 3.000” 3.002” 3.006”

2.506” 2.507” 2.514” 2.509” 2.510”

2.75” .74 kg 2.97” 3.00” .79 kg 3.00” .78 kg 3.31”

$ REDUCED $ Greasable 6K3177 CAT977K Bkt / Link Bearing $ REDUCED $ R36156 $ REDUCED $ Tesk 2008 T50063 John Deere 10mm Ext.Groove

C 17 In South Africa ready-made 13pa 22 can 48I buy in one lot JN40603

hardened steel bushes / bushings ?

C 17 12pa 20 6K3177 11W EXT. CE$24.64 Z 4 KSet Engineering Pty Ltd HOLE 0pa 1x12Ø C 1+24has 1,250 different size bushings 17pa 24

J50725 C 14 5pa available 19 EX STOCK. T82143=T50063=2.513” Delivery to South Africa takes 5-6 days.

B76G63G84 $ 79 B76-64-89 $ 90 B76G64G95 $ 80 B76G64G102 $ 99 B76-64H108 $ 110

3.002” 3.004” 3.003” 3.002” 3.003”

2.506” 2.507” 2.509” 2.509” 2.504”

3.31” .90 kg 3.50” 3.75” T 4.00” 1.09 kg 4.25”

HSB 193 Standen Rippers Tesk 2004 Plain Bushing 5V1874 CAT950, 960, 962-Bush-J Tesk 2009 Greasable Bush A2U913-194033 Eimco

C 22 3pa C 4 2pa D +14 4pa C 2+28 18pa D 17 0pa

B76G64G109 $ 66 B76-64-116 $ 92 B76-64H116 $ 94 B76-64H117 $ 102 B76-64H138 $ 102

3.002” 3.003” 3.003” 3.003” 3.003”

2.511” 2.504” 2.504” 2.504” 2.504”

4.30” T 4.58” 1.30 kg 4.58” 4.58” 1.21 kg 5.43” 1.21 kg

4V8675 CAT966G,972GH-Bush-J A2U913-194073 Eimco A2U913-194035 Eimco A2U913-194072 Eimco A2U913-194038 Eimco

D 4 3pa BUSHINGS 24 4V8675 CE$24 Quantity Discounts Available only upon C 12 34 all outstanding 75.7X5Ømm Step(AllOfThis Series)S$116 request9pa provided invoices D 24 1pa 44 are settled within 7 C70, DaysD21x2 Svik$110 D D10 0pa C75, D19x2 Svik$116 iscount for 6 or44 more of any line item $5.00 ea iscount for 10 or46 more of any line itemD21x2 $8.00 ea C D5 2pa C28.6, Svik$121

Z KSet 30 0pa

Damiens’ mistake Popular Selection C 25 0pa 8 B 8 6pa 8 Z 18 0pa Damiens’ mistake C 7+24 10pa 8

C 90 24pa C 9+24 10pa C 36 9pa D 12 2pa D 10 0pa

12 7J9745 8

10

7J9344 CE $10 9 12W EXT 8 R26633=3.0005” $104+

40 mm x 50 m TL-ER 40A 180

$ 30

19 27 28 5V1874 CE$31 J50725 30 J50725 38 C38, D21x2 Svik$202

Discount for 20 or more of any line item $10.00

Heavy Wall Bushes for 2.5 inch Diameter Shaft B77G64G114 $ 136 B79-64-51 $ 60 B79G64G76 $ 80 B80G64G50 $ 70

3.037” 3.128” 3.111” 80.10mm

2.507” 2.507” 2.508” 2.505”

4.50” 1.31 kg 2.00” .70 kg 3.00” 1.10 kg 1.97” 0.65 kg

Plus-size O.D. Greasable Bush D 15 1pa 36 JOY 1069127-459 B 30 2pa 18 K3x30° S 1x45° Plus-size O.D. Greasable Bush D 8 1pa 22 Pins Plus-size O.D. Greasable Bush D 22 3pa and 18 Bushes

B82G64G63 B82G64G76 B86-64N38 B89G64G76

3.252” 3.252” 3.370” 3.503”

2.504” 2.508” 2.506” 2.507”

2.50” 1.06 kg 3.00” 1.28 kg 1.50” 3.00” 1.82 kg

TESK Loader Bush TESK Excavator Bush Helical Internal Groove TESK

$ 88 $ 98 $ 77 $ 130

2001 2005 2 Only 2013

Dimensions shown are for the KSet Bush, n ot for nearby OEM numbers

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

Shims and Seals

B 6+50 33pa 24 J50911 Tools and Cutters J50911 C 12+24 12pa 26 Z Minimum 2 Product Order $150 C Prices 15 subject 0pa 34to change B95g64X146 = CAT980C-Bush-J

without notice

Discount for 6 or more of any line item $6 Discount for 10 or more of any line item $8 Discount for 20 or more of any line item $11

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 19 September 2015

Case Hardened Bushes - Precision Ground

KSet Part No. Price Outside

EX GST

B73-65G60 $ 46

Inside

Length

73.13mm 65.15mm 60.3mm

.54 kg

B75G65G30 $ 59 75.09mm 65.28mm 30.0mm B75G65G35 $ 52 ! 75.10mm 65.16mm 35.0mm .45 kg B75-65X60 $ 58 ! 75.05mm 65.15mm 60.0mm B75G65G60 B75G65G64 B75G65X75 B75G65G80

$ 78 $ 68 ! $ 88 $ 82

75.07mm 75.05mm 75.10mm 75.05mm

65.14mm 65.13mm 65.15mm 65.15mm

60.0mm 64.0mm .54 kg 75.0mm .65 kg 80.0mm .62 kg

Suit 65mm Diameter Shaft

Manufacture Notes

Locations Stock Usage Mfr

10-06-2015 $ 5,481

14 2pa 12 PFERRD Bush D Rubber Drum Holders - 6mm Shank John Deere T76637 C Complete 6 4pa PFERRD 12 range available $ REDUCED $ Greaseable D 32 0pa Bulk13 orders available $ REDUCED $ Type X C 27 10pa 21

KSet Popular Selection TESK 2012 Greaseable C 14 4pa 18 343831-11130, 343811-11370 B 34 9pa 19 Furukawa Kobelco SK220-BUSH-J,K OF8 C 29 25pa 20 J50303 ON HOLD TESK Greaseable B 0 +36 26pa 23 J50621 Special O.D.

B76G65G50 $ 74 76.0 mm 65.08mm 50.0mm .48 kg John Deere T126935,T100252 D 3 B79-65G65 $ 38 ! 79.80mm 65.16mm 64.8mm $ REDUCED $ 3 only D 3

6pa 12 0pa 10

To Discontinue

B80-65-35 B80-65-50 B80-65X50 B80G65X50 B80G65X58

$ 58 ! $ 58 ! $ 70 $ 78 ! $ 80

80.10mm 80.10mm 80.11mm 80.13mm 80.06mm

65.16mm 65.16mm 65.16mm 65.16mm 65.15mm

34.8mm 50.0mm 49.8mm .66 kg 50.0mm .65 kg 57.9mm .75 kg

B80G65G59 B80G65G64 B80-65G65 B80G65G65 B80G65X65

$ 90 $ 88 ! $ 78 ! $ 88 $ 80

80.13mm 80.10mm 80.04mm 80.06mm 80.06mm

65.20mm 65.15mm 65.22mm 65.14mm 65.16mm

58.9mm .80 kg 64.3mm Hitachi 64.8mm .89 kg 64.9mm 64.9mm

B80G65G69 B80G65G74 B80G65G75 B80F65X75 B80G65G80

$ 90 $ 90 $ 90 $ 160 $ 88

80.14mm 80.12mm 80.06mm 80.10mm 80.07mm

65.23mm 65.23mm 65.15mm 65.26mm 65.15mm

YB12B01101P1 Kobelco SK135-Bush-K C 7 6pa 21 11wGrooves Plus Was Sint GSTBronze 4344899 EX120-BUSH-HL (2) C 15 12pa 21 ,4444914S Sintered: 80.34x65.41 417-70-11860 WA250-Bush-J,K,L A 48 30pa 24 10W Int. 07144-10607 WA200-5-Bush-C,J,K,L D +14

J50911 10wExt.Int

PFERRD Komatsu PC120-Bush-GKomatsu C 23 11pa Spiral 26 Bands - Zirconia BF8 10w Ext Abrasive Complete PFERRD range available 68.9mm Kobelco YM12B01120P1 SK135-Bush-HL C 5 6pa 24 SK135SR-2 11wGrooves

Bulk orders available 11wGrooves 73.9mm Kobelco YY12B01554P1 SK135-Bush-HR C 9 1pa SK135SR-2 74.5mm 1.02 kg TESK 2007 B 39 18pa 23 Popular Selection Rec 80x6 74.8mm LP12B01030P1 Flange 123x9 SK135-BUSH-J O,BF8 D KSet 2pa 80.0mm TESK 2012 C 20 12pa 21 Use only Ovako 85x65

B80G65G84 $ 98 B80G65G89 $ 92 B80G65G100 $ 98 B80-65X130 $ 110

80.05mm 80.05mm 80.06mm 80.06mm

65.15mm 65.10mm 65.15mm 65.15mm

84.0mm 1.11 kg 88.5mm 1.17 kg 99.6mm 1.37 kg 129.8mm

Hitachi EX120-BUSH-HR (2) C 8 Nilpa 14 4365448 80.33x65.42x34.8 Hitachi EX120-BUSH-I,J,K C 44 Size 8pa 17 4344898S Code 80.35x65.40x49.8 Price $46 Komatsu PC120-BUSH-HL OF8 38 C 10 7pa 203-70-56140 Dia x 25 w 20 TL-GK3825 /6 + Int.Cntr.pg81 $ 39 Hitachi EX 120 A4596 Dia x31pa 30 w 23 TL-GK4530 /6 $ 39 Komatsu PC120-BUSH-HR 2BF8 51 B 8Dia +30 x15pa 25 w 21 TL-GK5125 707-76-65220 /6 $ 47 pg81 60 Dia x 30 w

TL-GK6030 /6

Furukawa 353831-11130 C 20 6pa 26 Komatsu 135-30-11251 C 12 6pa 28 TESK 2007 C 10+16 12pa 31 Int Groove 35mm wide PC60-7-Bush-B D 5 4pa 31

$ 50

Komatsu D53 FrameBrace 707-76-65250

Heavy Wall Bushes for 65mm Diameter Shaft KSet Part No. Price

Outside

Inside

B83G65G100 $ 1 10 !

B85G65X65 $ 1 10 !

B90-65X90 $ 120 B95F65X80 $ 220

83.06mm 85.10mm 90.09mm 95.17mm

65.16mm 65.16mm 65.12mm 65.30mm

EX GST

Length 99.5mm 65.0mm 90.0mm 80.0mm

Manufacture Notes

Size

Code

Price

Locations 38 Dia x 25 w TL-GSB3825 Z60 $ 3.25

Dia x 0pa 30 w 28 TL-GSB4530 Z60 $ 3.25 $ REDUCED $ O.S. TESK C45 20

51 Dia x 25 w TL-GSB5125 Z60 $ 3.50 1.17 kg $ REDUCED $ O.S. TESK BF8 C 31 11pa 29 30 w 35 TL-GSB6030 Z80 $ 3.50 2.17 kg TESK 2013 BF8 C60 9 Dia x 1pa 0pa 90 GST 2.41 kg Kobelco YY12B01446P1+ YY12B01447P1 N 17 One BushPlus to Replace Two 1.63 kg

B76-67G191 $ 88 ! 76.02mm 66.62mm 190.5mm

2 only Z 2

$ REDUCED $

2pa

Mudgee Brgs bought twice, 6 off

BUSHINGS

Quantity Discounts Available only upon request provided all outstanding invoices

are settled within 7 Days Discount for 4 or more of any line item $6 ea Discount for 10 or more of any line item $9 ea Discount for 20 or more of any line item $12

Bushes and Pins

Dimensions shown are for the KSet Bush, not for nearby OEM numbers KSet Engineers design bushes to suit market requirements Example: A neater fit to shafts and pins.

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

Cutters and Tools

Minimum Discount forProduct 4 or more ofOrder any line$150 item $6 Prices subject Discount for 10toorchange more ofwithout any linenotice item $9

Discount for 20 or more of any line item $12

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 20 September 2015

Case Hardened Bushes - Precision Ground

KSet Part No. Price

EX GST

Outside

Suit 2.75” & 70mm Diameter Shaft

Inside

Length

Stock, Usage, Mfr, 30-06-14 $

Manufacture Notes

Locations 20-08-2015

13,540

$ 15,436

B76-69-80 $ 70 76.05mm 69.16mm 80.0mm Sleeve Suits 2.75” Shaft Z 4 0pa PFERRD B80-70-25 $ 56 79.99mm 70.20mm 25.0mm Case D144421 580SK-BUSH-BC Rubber D 5 Drum 0pa 12 Holders - 6mm Shank B80-70-28 $ 42 79.78mm 69.90mm 28.0mm .27 kg Case 580SL 124568A2 Trunnion CComplete 17 0pa 12 range available , 4X45° Int.One End PFERRD

Bulk orders available B80G70G50 $ 75 80.07mm 70.18mm 50.0mm .46 kg TESK 2003 C 6+40 29pa 18 J50621 16 in 1 lot B80G70X50 $ 88 80.07mm 70.15mm 50.0mm .44 kg TESK 2004 A 65 KSet 77pa Popular 21 Selection B80F70-52 $ 160 80.02mm 70.10mm 51.98 .63 kg Flange 100x7.5 Sandvik 2643 9788 A 51 90pa 41 F99.99,N7.47 B80F70X52 $ 170 80.02mm 70.10mm 51.98 .62 kg Flange 100x7.5 Sandvik 2643 9808 A 69 86pa 44 F99.99,N7.47 B80-70-60 $ 79 80.07mm 70.13mm 60.0mm .56 kg Furukawa 352811-11230 C 22 15pa 19 B80-70N60 B80G70X60 B80-70N65 B80G70X65 B80G70G75 B80-70-79

.54 kg

JUG-A-O 0504-10003 Kobelco SK60 PY52F 010 03P1 BF8 JUG-A-O 0504-10004 Hydraulic Ram Bush BF8 TESK Greaseable Bush TESK Plain Bush

$ 160 $ 86 $ 165 $ 68 $ 90 $ 88

80.02mm 80.10mm 80.02mm 80.10mm 80.07mm 80.05mm

70.04mm 70.12mm 70.04mm 70.12mm 70.20mm 70.15mm

60.0mm 59.7mm 65.0mm 65.0mm 75.0mm 80.0mm

B80-70-80 $ 8 8 !

B80-70X80 $ 9 8 !

B80G70X85 $ 110 B80G70X90 $ 110 B80-70G104 $ 110

80.11mm 80.05mm 80.09mm 80.10mm 80.07mm

70.13mm 70.15mm 70.20mm 70.19mm 70.20mm

80.0mm .73 kg 80.0mm .72 kg 85.0mm .75 kg 90.0mm .80 kg 104.0mm .94 kg

B82-70-32 B82G69G36 B82-70-45 B82G70-56 B82-70-57

$ 52 $ 3 8 ! $ 50 $ 66 $ 66

3.253” 3.262” 3.253” 3.253” 3.253”

2.761” 2.736” 2.759” 2.760” 2.756”

1.28” .39 kg 1.42” 1.75” .52 kg 2.20” .62 kg 2.25” .70 kg

CAT 633 STRG $ REDUCED $ CAT 920 CAT936-Bkt/Link CAT983-BUSH-F

B82-70G57 B82-70-60 B82G70G60 B82G70G64 B82-70-70 B82G70G70

$ 44 $ 56 $ 5 8 ! $ 68 $ 68 $ 68

3.252” 3.252” 3.252” 3.253” 3.254” 3.252”

2.758” 2.757” 2.757” 2.760” 2.751” 2.759”

2.23” .70 kg 2.37” 2.37” .67 kg 2.50” 2.75” .86 kg 2.75”

CAT950-BUSH-A 7K0086 CAT Blade Bearing 3G9598 $ REDUCED $ TESK 3G5285 Caterpillar Bearing TESK 2005 Plain Bush CAT953-BUSH-L,K Tilt Link

B82-70-74 B82G70G75 B82-70-95 B83-70X44 B83-70X55 B83-70X71

$ 68 3.252” 2.756” 2.90” .90 kg $ 68 3.252” 2.756” 2.95” $ 90 3.253” 2.757” 3.75” 1.11kg $ 86 83.13mm 70.14mm 44.0mm .53kg $ 98 83.13mm 70.14mm 55.0mm .66kg $ 68 83.10mm 70.13mm 71.0mm

B85G70G44 B85G70X55 B85-70G60 B85G70X60 B85G70G65 B85G70X66

$ 68 $ 78 $ 72 $ 80 $ 72 $ 88

85.10mm 85.11mm 85.09mm 85.10mm 85.07mm 85.13mm

70.13mm 70.18mm 70.19mm 70.12mm 70.24mm 70.18mm

B85G70X67 B85-70-70 B85-70X70 B85G70X70

$ 8 2 ! $ 78 $ 58 $ 78

85.15mm 85.10mm 85.05mm 85.07mm

70.30mm 70.18mm 70.20mm 70.15mm

B85G70X75 B85-70X77 B85G70X78 B85-70G80 B85G70X80

$ 84 $ 78 $ 88 $ 84 $ 88

85.10mm 85.15mm 85.07mm 85.17mm 85.10mm

70.15mm 70.18mm 70.16mm 70.20mm 70.19mm

Dimensions shown are for the KSet Bush, not for nearby OEM numbers

.56 kg .58 kg

.66 kg .74 kg

C 9+30 2 0pa 32 36pa For 2.75” Dia Pin C 36 20pa 27 C 14+18 1 4pa 32 29pa For 2.75” Dia Pin C 17 17pa 28 C 18 14pa 24 C 7 Size 0pa 24 Code Price

38 Dia x 25 w

John Deere T67856, 504234 45 C Dia 14 x 305pa w $ REDUCED $ Furukawa 353811-11190 C 28 2pa 51 Dia x 25 w TESK 2009 Greasable Bush C 18 12pa 60 Dia x 30 w Kobelco SK135 Offset C 1+14 4pa Volvo BM90C-BUSH-J,K,L C 17 11pa

TL-GK3825 /6 24 TL-GK4530 /6 24 TL-GK5125 /6 24 TL-GK6030 /6

24 26

$ 39 $ 39 $ 47 $ 50 Plus GST

4T0370 C 33 8pa 11 Ph 4954 3270 CE $ 10.73 PFERRD 4 only Z 4 0pa 8E6752 CAbrasive 57 19pa Spiral 12 Bands - Zirconia$ 12.34 4V2883 D C+14 4pa J50810 2.762” omplete PFERRD rangeOriginal available 8K7618 C 21 6pa 15 available 7J9374 Bulk orders D 8 KSet 0pa Popular Selection CE$11.45 C 7+16 8pa 14 J50811 CE $13.69 D 8+16 12pa 19 J50811 N+14 J50902 11wExt Cfr3 Int1 Tillys$30 C 16+24 19pa 19 J50902 D 19 2pa 19

CAT983 7K8114 C 16 0pa 23 Sold 16 July2013 CAT983 Bearing C 32 0pa 20 3G5281 Caterpillar Bearing N +14 J50902 $83Expressway 2.761” Kawasaki KLD 80 Z1 B/OF8 C 6+12 6pa 24 J50902 Size Price Kawasaki KLD 80 Z1 B/OF8 C 12 1pa 26 Code Dia x 25 w TL-GSB3825 Z60 $ 3.25 Kawasaki KLD 95 Z 38 D 9 2pa 24 ORIG.PIN=69.86Ø B/O Fig 8 45 Dia x 30 w TL-GSB4530 Z60 $ 3.25

Dia x 25 w TL-GSB5125 Z60 $RANDALLS 3.50 2002 Bucket Bush 51 C 18 3pa 17 404 325 400 IHI BF8 60 C 6Dia +30x 15pa 25 J50810 30 w TL-GSB6030 Z80 $ 3.50 GST $K220 707-76-70720 Komatsu N +14 J50902 10w IntPlus #3925 418-63-33140 &Kobelco SK045-Bush-T B 19+40 36pa 26 J50810 BF8 707-76-70010 Komatsu W120 C 11 0pa 16 BUSHINGS Kobelco SK210-Bush-I B 34 7pa 28 Quantity Discounts Available only upon 66.8mm .92kg Komatsu PC200-Bush-HL, HR request C 8+24 provided 9pa 25 205-70-73180 17wExtPg76 allOF8 outstanding invoices are settled 70.0mm 1.02kg TESK 2004 C 24 10pa 22 within 7 Days Discount 4 or more line item $610wIntPg81 ea 69.7mm .97kg Komatsu PC120-BUSH-D,E BF8 C 35 for 8pa 29 of any707-76-70240 for 10 or29 more of any line item $9 ea 70.0mm Komatsu PC120-BUSH-B,C Discount A 33 28pa 707-76-70230 BF8 9ExtPg81 Discount for 20 or more of any line item $12 75.0mm 1.03kg Komatsu PC200-BUSH-HL A 9+36 23pa 30 76.9mm 1.08kg Komatsu PC120-BUSH-F OF8 C 5 2pa 29 203-70-56130 78.0mm Komatsu PC200-6,7-BUSH-HR C 9 4pa 29 and Pins 707-76-70110 Bushes 80.0mm CAT325,330 7Y3551 D 2 Cutters 0pa and Tools CE $55.81 80.0mm 1.11kg TESK 2011 B 5+36 24pa 32 Suit Kobelco SK135 Offset

44.0mm .59kg 55.0mm .73kg 59.6mm .82kg 59.7mm .82kg 64.8mm 66.0mm .66kg

PRICES DO NOT INCLUDE GST PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE

Bushes for 70mm Diameter Shaft continued next page

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

Minimum Product Order $150 Discount for 4toorchange more ofwithout any linenotice item $6 Prices subject

Discount for 10 or more of any line item $9 Discount for 20 or more of any line item $12

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 21 September 2015

Bushings - Hardened Steel - Precision Ground

Suit 70mm Diameter Shaft Stock, Usage, Mfr, 26-02-14 $

Length

Manufacture Notes

KSet Part No. Price

EX GST

Outside

Inside

B85G70X84 B85G70X85 B85G70X86 B85G70G86 B85G70X97

$ 86 $ 98 $ 89 $ 70 ! $ 98 !

85.13mm 85.14mm 85.10mm 85.08mm 85.05mm

70.29mm 70.16mm 70.18mm 70.16mm 70.15mm

84.8mm Komatsu 203-70-41411 2xOF8 C 23 SHORTEN 8pa 33 BUSHES21K-70-41411 EASILY ! Pg76 84.7mm 1.18kg Komatsu PC120-BUSH-A 2xBF8 A 44+40 54pa 33 203-70-56121 12w Ext Groove 85.0mm 1.19kg Komatsu PC200-BUSH-B,G B Code: 7+28 21pa 33 205-70-71360, TL-RNGN $ 46 each707-76-70320 plus GST 85.8mm $ REDUCED $ TESK 2006 D RNRN 13 2pa 2200T01020

707-76-70651 12W EXT 12 04 670 97.0mm 1.35kg $ REDUCED $ KATO HD900 BF8 A TL6-RNGN 63 13pa $ 216 36 for 6 Eureka Eng

B86-70-25 B86-70-28 B86-70-30 B86-70-32 B86-70-34

$ 56 $ 60 $ 62 $ 40 $ 64

86.00mm 86.01mm 86.01mm 86.00mm 86.01mm

70.20mm 70.20mm 70.20mm 70.20mm 70.20mm

25.0mm .37kg 28.0mm .40kg 30.0mm .42kg 32.0mm 34.0mm .51kg

Case Case Case Case Case

Locations 20-08-2015

8,163

$ 4,046

SANDVIK Cormorant - Turning Insert -

E176194 D 12 - Ceramic 0pa 9 Whisker Reinforced D135559 C 12 3pa 9 Bottom580SK “TUI”,”TLL” D135557 C 11 1pa 9 TOP 580SK “TUT” E176196 C 7 0pa 9 D135558 C 12 2pa 9 D151073 D138042

580K 580K 580K 580K 580SK

B86-70-47 $ 35 ! 86.01mm 70.20mm 47.0mm .51kg $ REDUCED $ 1 only to clear Check Dimensions B86F70X55 $ 100 86.00mm 70.10mm 55.0mm Flange 150 Dia x 15 BF8 Z Hard 1 Part Turning B86G70X80 B89-70X56 B89G70G70 B89G70G75

$ 110 86.01mm 70.18mm 80.0mm O.S. TESK 2004 C 2 6pa 28 $ 75 3.511” 70.18mm 55.6mm Kawasaki KLD80Z2 BUSH-J B/OF8 Z Code: 1 TL-SNGN $ 40 each plus GST $ 80 3.503” 2.756” 2.75” 1.26kg TESK 2004 D SNGN 1 7pa 27 08T01020 670 12 07 $ 80 89.10mm 70.15mm 75.0mm Kawasaki KL 85 Z2 C TL6-SNGN 6 6pa $ 196 30 for 6 SANDVIK Cormorant - Turning Insert -

Heavy Wall Bushes for 70mm Diameter Shaft

- Ceramic Whisker Reinforced A silicon carbide aluminium oxide based Locations ceramic with excellent bulk toughness.

Recommended for Hard Part Turning D135741 C 2 4pa 9 580SK “ATO” in unfavourable conditions

KSet Part No. Price

Outside

Inside

B90-70-24 B90F70-24 B90-70-30 B90-70-32 B90-70R32

$ 40 $ 38 $ 52 $ 38 $ 32

90.00mm 90.00mm 90.00mm 90.01mm 90.00mm

70.22mm 70.22mm 70.21mm 70.23mm 70.20mm

24.0mm 24.0mm 30.0mm 32.2mm 32.0mm

Case 580K Flange 94 x 4.25 D135742 D 27 Case 580K D151060 C 7 Case 580SK-Top-Piv C 29 Case 580K D135555 D 12

B90F70-33 B90-70-38 B90F70-38 B90-70R38 B90F70R38

$ 32 $ 40 $ 40 $ 25 ! $ 40

90.00mm 90.01mm 90.00mm 90.00mm 90.00mm

70.19mm 70.19mm 70.19mm 70.20mm 70.22mm

33.0mm 37.8mm 38.0mm 38.0mm 38.0mm

Case 580SK-BUSH-AB D 13 0pa D136569 BEFORE 0047600 Case 580SK-LOW-PIV C 15 0pa 16 D151070 Case 580SK-BUSH-AB C 4 4pa 16 D151071 F94x4 $ REDUCED $ Recessed D135556 Z Code: 18 0pa REC. TL-N151.2 $ 110 2each plus80x4.3 GST Case 580K D136569 Z N151.2-600-50EP 7 0pa F94x4 2 REC.79.95x4.3

B90F70R39 B90-70R40 B90-70-44 B90-70R50 B90-70-50

$ 66 $ 56 $ 66 $ 75 $ 74

90.00mm 90.00mm 90.00mm 90.00mm 90.01mm

70.22mm 70.33mm 70.20mm 70.20mm 70.19mm

39.3mm 40.0mm 44.0mm 49.7mm .82kg 49.7mm

Flange 94 x 4.1 580SK-BUSH-B D 2 0pa 10 D135740 2 REC.79.94x4.3 - Parting Case 580K E176209 C SANDVIK 9 0pa Cormorant 10 2x REC Insert 80x4 660g Cubic Boron Nitride Q-Cut CBN Case 580SK-BUSH-F C 6 0pa 10 D1372181xB90-70M44 Hard Rockwell C Case 580K D136715 D Part 1 through 0pa 10 Bushes 2x REC.60 79.9x4.1 Middle“SF” TESK Plain Bush 2001 C 28 11pa 20

EX GST

Length Manufacture Notes

4pa 9 0pa 10 0pa 10 4pa 10

F93.8x4.25 580SK “ATI” ORIG=89.98 D151069 2 REC. 80x4.3

TL6-TL-N151.2 $ 606 for 6

B90-70-63 $ 46 !

B90G70G69 $ 70 B90G70G80 $ 88 B90-70X80 B90-70X81 B90-70X86 B90G70X86 B90-70X100

90.01mm 70.22mm 63.2mm $ REDUCED $ Case 590 D151058 C 20 2pa 12 90.06mm 70.15mm 69.0mm 1.36kg Sandvik 23330018 Rod End B 7 5pa 31 Surface Top Hammer Drills DP1500i

BUSHINGS 90.10mm 70.18mm 80.0mm TESK Greaseable Bush 2002 B 17 15pa 33 Quantity Discounts Available only upon request provided all outstanding invoices $ 78 90.10mm 70.18mm 80.0mm Kato HD700V2 BUSH-I B/OF8 D 11 5pa are 16 settled within 7 Days $ 68 ! 90.10mm 70.18mm 80.0mm Kato HD700V2 BUSH-J BF8 Z 20 0pa for 4 or more of any line item $6 ea Discount $ 78 90.10mm 70.18mm 86.0mm 1.71kg Kato HD700V2 BUSH-K BF8 D 20 0pa 34 or more of any line item $9 ea Discount for 10 Discount of any line item900V2 $12 BF8 $ 99 ! 90.10mm 70.18mm 86.0mm Kato 800V2,900 BUSH-J C 6 0pa for 20 39 or more237-4200 2000 $ 136 90.12mm 70.23mm 100.0mm Kato 800V2,900 BUSH-K C 17 5pa 43

B92-70-51 B93G70X86 B95G70G69 B100G70R75 B108G70G70

$ 58 ! $ 90 $ 90 $ 96 $ 120

92.10mm 93.10mm 90.06mm 100.06mm 108.11mm

2.756” 50.8mm $ REDUCED $ O.S. TESK C 17 0pa 18 70.17mm 86.0mm O.S. TESK 2005 BF8 C 3 Pins 0pa 28 and Bushes 70.15mm 69.0mm 1.76kg Sandvik 34453868 Bushing Tube B 16 DP1500i Surface Top Hammer Drills

Shims 70.12mm 75.0mm Komatsu WA250-3A-BUSH-D,E Z 0pa and Seals 2XRECESS 85ØX10

Tools and Cutters 70.08mm 69.77mm Sandvik 2873 4600 C 6 0pa 32 ML2D LiftCylRodEye 3x 5Dia

Dimensions shown are for the KSet Bush, not for nearby OEM numbers

KSet Engineers design bushes to suit market requirements PRICES DO NOT INCLUDE GST SUBJECT TO CHANGE Example: A neaterNOTICE fit to shafts and pins.

PRICES ARE WITHOUT

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

Minimum Product Order $150 Discount for 4toorchange more ofwithout any linenotice item $7 Prices subject

Discount for 10 or more of any line item $10 Discount for 20 or more of any line item $14

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 22 September 2015

Bushings - Hardened Steel - Precision Ground Suit 71mm to 75mm Diameter Shaft Stock, Usage, Mfr, 30-06-14 $

KSet Part No. Price Outside

Inside

Length

Manufacture Notes

Locations 26-08-2015

5,887

$ 3,128

EX GST

B86-71X50 B86G71G50 B86G71G65 B86G71G70 B86G71G84 B86G71G90

$ 78 $ 70 $ 78 $ 78 $ 78 $ 78

86.14mm 86.14mm 86.12mm 86.12mm 86.12mm 86.12mm

71.20mm 71.25mm 71.20mm 71.20mm 71.20mm 71.20mm

50.0mm 0.72kg Hitachi 50.0mm 0.72kg 4409122 65.0mm 0.94kg 3072715 70.0mm 1.01kg Hitachi 90.0mm 1.21kg Hitachi 90.0mm 1.30kg Hitachi

B85-75-38 B85F75-38 B85G75G60 B85G75X60 B85G75X90

$ 48 ! $ 68 $ 70 $ 76 $ 98

85.07mm 85.12mm 85.05mm 85.05mm 85.08mm

75.18mm 75.20mm 75.15mm 75.12mm 75.19mm

37.9mm .38kg 37.9mm .41kg 60.0mm .57kg 60.0mm .57kg 90.0mm .86kg

$ REDUCED $ 1x6mm Ext Chamfer VOE11082827 Flange 89 x 4 Hydraulic Cylinder Greasable Bush Kobelco SK135 Hydraulic Cylinder Greasable Bush

C 14 4pa 27 Zaxis 160 LC N 27 Was86.30mmx71.45mm PFERRD2pa Fan Grinders - 6mm Shank C 9 Aluminium 4pa 23Oxide

86.35x71.43x64.8 $182 - 120 Grit C 6pa 27 PIN-B=230 oal,A+725 oal 444 3878 Complete PFERRD range available D

0pa orders 27 available

Bulk C 8 4pa 28 KSet Popular Selection C 16 6pa 15 C 50 0pa 16 F89N4,UndecutL150&L180 QH C 9+16 15pa 20 N+16 24 B85g75X60 for SK135 C 29 11pa 34 Kobelco SK135

B90G74G48 B90-75-50 B90-75X57 B90-75-60

$ 50 90.12mm $ 68 ! 90.05mm $ 98 90.11mm $ 76 90.05mm

74.85mm 75.20mm 75.40mm 75.15mm

48.2mm 50.0mm .77kg 57.1mm .83kg 60.0mm

T154057 $ REDUCED $ 154-78-14224 2002

C 9 A 67 C 22 C 12

B90-75G64 B90G75G65 B90-75G65 B90-75G66

$ 76 $ 78 $ 78 $ 78

90.05mm 90.05mm 90.12mm 90.07mm

75.26mm 75.18mm 75.20mm 75.16mm

64.7mm 64.7mm 65.0mm 65.0mm

B90G75G75 B90-75G80 B90G75G85 B90G75G120 B90-75G138

$ 84 $ 84 $ 86 $ 98 $ 98

90.05mm 90.08mm 90.06mm 90.12mm 90.12mm

75.15mm 75.18mm 75.18mm 75.20mm 75.25mm

75.0mm 1.12kg 385-1001-0591 Komatsu D85A-18 C 9 7pa 27

80.0mm 1.21kg Komatsu WA300-Bush-J C 18 6pa 20 85.0mm 1.27kg Komatsu WA300, 320-Bush-L,K B 22 14pa 29 119.8mm 417-70-31820 WA200-5-Bush-F 138 mm 385-1001-8432 385-1001-0591 W120 D 7 1pa 30

.97kg .91kg 1.01kg 1.01kg

Zaxis 160-Bush-I ZX200-3-Bush-I EX120-Bush-F (2) ZX120-Bush-F,J (2) Zaxis 160-Bush-HR Zaxis 160-Bush-HL

John Deere 315SE Plain Bush Komatsu Plain Bush

154-63-42320 154-63-42420 154-78-14223 Komatsu

Komatsu Komatsu Komatsu WA320-Bush-B,C

6pa 25pa 0pa 16pa

C 10 6pa B 21 Size 2pa C 50 14 4pa Dia x 30 w C 60 22 4pa Dia x 40 w

9 20 23 21

HARRYBILT BUCKET D85A-18 16 OFF RIPPERS B90-75X62=341811-11220

24 D85A-18 2 OFF Ram/Dozer 26

D85A-18 2 OFF Ram Eye Code Price 25

ORIG.=B90-75G65 TL-F5030/6 A120 $9 25 TL-F6040/6WA320-1 A120 &$WA320-3 11

80 Dia x 50 w TL-F8050/6 A120 $ 15 W120=B90-75G75 Plus GST

K$80 2006 W120 :385-1001-0591

DISCOUNT FOR QUANTITY

BUSHINGS Heavy Wall Bushes for 75mm Diameter Shaft KSet Part No. Price

EX GST B92G75G65 B95-75-50 B95-75-55 B95-75-75 B95G75G100

Outside

$ 80 92.07mm $ 58 95.05mm $ 62 95.05mm $ 64 95.05mm $ 70 ! 95.10mm

Inside 75.28mm 75.18mm 75.15mm 75.15mm 75.15mm

Length

Manufacture Notes

65.0mm 50.0mm 1.03kg 55.0mm 75.0mm 100mm 2.07kg

Hydraulic Cylinder 2000 Komatsu Komatsu $ REDUCED $

B100G75G75 $ 88 100.11mm 75.15mm 75.0mm B100G75G100 $ 98 100.12mm 75.15mm 100 mm

2.80kg 2.90kg

Quantity Discounts Available only upon request provided all outstanding invoices settled Greasable Bush C 10 are 5pa 19 within 7 Days

Locations

Plain Bush D85A-18 D85A-18 Greasable Bush

for4pa 4 or more CDiscount 5 16 of any line item $ 6.00 ea DDiscount 13 for 0pa 1120g 10 or more of any line itemRIPPER $ 9.00-ea D 11 1pa 17 RIPPER Discount for 20 or more of any line item $ 12.00 ea C 25 6pa 22 GIRVAN - 2040g Overnight deivery to Darwin Northern Territory

Plain Bush D 1 Plain Bush D 1

2000 2004

2pa 22 2pa 29

Bushes and Pins

Dimensions shown are for the KSet Bush, not for nearby OEM numbers KSet Engineers design bushes to suit market requirements Example: A neater fit to shafts and pins.

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

Seals and Shims

Quantity Discounts Cutters andOnly Tools Available upon request provided all outstanding invoicesareOrder settled within 7 Days Minimum Product $150 PricesDiscount subjectforto4 change or more ofwithout any line notice item $7 Discount for 10 or more of any line item $10 Discount for 20 or more of any line item $14

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 23 September 2015

Bushings - Hardened Steel - Precision Ground

Suit 3” Diameter Shaft Stock, Usage, Mfr, 30-06-14 $

KSet Part No. Price

EX GST

Outside

Inside

Length

B89-76-33 B89-76-39 B89G76G40 B89-76-49 B89G76G51

$ 49 $ 50 $ 48 $ 58 $ 64

3.504” 3.503” 3.493” 3.503” 3.501”

3.014” 3.004” 3.001” 3.004” 3.006”

1.31” D7G Ripper Group 3J6442 1.54” .51kg Eimco A2U913-194036 1.56” T CAT950-BUSH-B 7J9694 1.93” .63kg Eimco A2U913 194037 2.00” .63kg TESK 4x5Ø Holes

B89G76G53 B89-76-57 B89-77-57 B89-76-63 B89G76G63

$ 40 ! $ 66 $ 48 $ 66 $ 68

3.500” 3.504” 3.505” 3.506” 3.504”

3.006” 3.006” 3.020” 3.012” 3.006”

2.12” .66kg 2.24” .70kg 2.25” 2.50” 2.50” .79kg

$ REDUCED $ 21 Only to clear TESK 2003 D7G Ripper Group 3J6167 TESK 2005 TESK 2007

B89G76G64 B89-76-70 B89G76G73 B89-76G75 B89G76G76

$ 42 $ 68 $ 68 $ 68 $ 70

3.506” 3.502” 3.505” 3.504” 3.504”

3.011” 3.004” 3.005” 3.008” 3.006”

2.50” 2.75” .88kg 2.85” 2.97” .95kg 3.00” .95kg

Caterpillar Bearing TESK Replaces Bronze CAT955 Bkt/Link TESK

B89F77-79 B89-76G81 B89-76G83 B89G76G89 B89G76G94

$ 90 $ 68 $ 68 $ 84 $ 86

3.485” 3.503” 3.504” 3.502” 3.503”

3.025” 3.009” 3.006” 3.005” 3.012”

3.10” 3.18” 1.05kg 3.25” 1.07kg 3.50” 1.12kg 3.70” T

Flange 114 x 2.5 T38642 CAT966-BUSH-C 4V8674 Case 721-BUSH-J,L,K TESK 2x5Ø holes CAT980C,F,G-Bush-L,K 1V9148

B89G76G102 B89G76X105 B89-76G107 B89G76X108 B89G76G133

$ 88 $ 148 $ 80 $ 116 $ 98

3.503” 3.504” 3.504” 3.503” 3.506”

3.006” 3.006” 3.008” 3.005” 3.014” 5.24”

B90G76G76

$ 90 !

3.547”

3.006” 3.00” 1.05 kg $ REDUCED $ Extra Size O.D. D 9

B95-76-26 B95-76-38 B95-76-40 B95-76-51 B95G76G60

$ $ $ $ $

3.753” 3.753” 3.751” 3.752” 3.753”

3.006” 3.007” 3.008” 3.004” 3.006”

1.00” 1.50” 1.60” 2.00” 2.37”

B95G76G62 B95G76G63 B95G76G70 B95G76G76

$ 44 $ 78 $ 98 $ 82 !

3.740” 3.752” 3.753” 3.752”

3.000” 3.006” 3.006” 3.006”

2.45” 1.05kg $ REDUCED $ Greasable 2.50” 1.20kg TESK, Greasable 2001 2.75” 1.42kg Hydraulic cylinder bush, Greasable 3.00” 1.55kg $ REDUCED $ Greasable

D 29 9pa 10 ZEMEK ENG .

D 24 8pa 16 D +16 0pa 2 USED Scandinavian C 9 DISCOUNT 4pa FOR 22 QUANTITY 4 USED Scandinavian BUSHINGS D 26 1pa 24 3G5999 = 3.756” x3.013” x2.38” Quantity Discounts Available only upon Z 5 0pa request provided invoices C 6 6pa all24outstanding

are settled within D 10 3pa 31 7 Days D Discount 12 for 4 or0pa line item $ 6.00 ea more22 of any

B95G76G82 B95G76G89 B95G76G102 B95G76G120 B95G76G121

$ 84 ! $ 98 $ 106 $ 70 ! $ 102

3.752” 3.754” 3.752” 3.740” 3.752”

3.006” 3.006” 3.006” 3.000” 3.006”

3.25” 1.67kg $ REDUCED $ Greasable 3.50” 1.79kg Hydraulic cylinder bush, Greasable 4.00” 2.04kg TESK, Greasable 2001 4.71” 2.47kg $ REDUCED $ T66214, U43721 4.75” 2.47kg Hydraulic cylinder bush, Greasable

for 10 0pa or more22 of any line item $ 9.00 ea D Discount 8 CDiscount 6 +12 for 20 or 6pa 25 line item $ 12.00 ea more of any C 1+20

12pa 28 Northern Territory Overnight deivery to Darwin Z 7 2pa 28 C 2+24 26pa 30

42 34 48 48 48

Manufacture Notes

Locations 10-06-2015

5,887

$ 7,151

Z 0pa Was B89-77-33 B 29 20pa 15 STEP 3.48ӯx3 ORIG=17HRC D P4 FERRD Fan 2pa 21 - 6mm Shank CE$21.02 Grinders C 29 Aluminium 11pa 18 Oxide - 120 Grit B 49 16 range available Complete9pa PFERRD Bulk orders available D 21 0pa From T42843 B89g76g54 C 37 32pa 20 Popular D KSet 13 6pa 20 Selection D7G RIPPER GROUP C 20 4pa 21 B 13 26pa 22 McCULLOCHs

7J9346 D 22 2011 C 11 8J6536 C 18 7K9573 C 33 2001 B 37

0pa 10pa 24 1pa 24 14pa 25 14pa 25

Z 2 C 6 C 23 A 39 C 10

0pa 5pa 28 10pa 27 39pa 29 6pa 32

OFM 4 x 6 Dia HolesCE$22

ORIG BRONZE 4X3Ø CE $30.80 F=114x2.5 CE$27 CASE LOADER

Mfr $28

1 IN STOCK=3.003”

1.19kg

Size Code Price A120 $ 9 4.00” 1.29kg Caterpillar 4J6533 C 50 19 Dia x 30 Nilw pa TL-F5030/6 24 4.13” 1.35 kg Atlas Copco 5575 7008 92 B 60 24 Dia x 4011pa 46 KML SteerCyl 0119 99 w TL-F6040/6 A120 5590 $ 11 4.23” T CAT950-BUSH-F 8K5757 D 2 0pa 80 Dia x 50 w TL-F8050/6 A120 CE$30.56 $ 15 4.25” 1.35 kg Groove=86.6Ø 10Radius B 9+48 J50629 32pa 46 Scanforest, Plus CATBuncher GST 1.68 kg

CAT 966-BUSH-B

9J7078 D 2

0.51kg

TESK, Plain 2007 Caterpillar 3J6484 D10 Ripper 0.82kg Caterpillar 28 Ripper 1.04kg Caterpillar 28 Ripper 1.17kg Caterpillar 3G5999, 3G5999 0.80kg

2pa

40mm Wide Ext Groove

5pa 22

Heavy Wall Bushes for 3” Diameter Shaft B98G76G102 $ 110

3.877”

3.006” 4.00”

O.S.TESK, Greaseable

B100-76X75 $ 120 ! 100.05mm 3.008” 2.95” 1.89kg Eimco B100T76X89 $ 170 100.05mm 3.009” 3.503” OAL Eimco B100-76X144 $ 220 100.03mm 3.001” 5.68” Eimco B102G76G76 $ 120 B102G76G102 $ 140 B102G76G152 $ 190

4.004” 4.004” 4.004”

B114G76G96 $ 130 ! 4.503” B133T76R67 $ 248 5.255” B92-79-64 $ 70 3.632”

3.006” 3.00” 3.006” 4.00” 3.006” 6.00”

2008 D 2

A2U913-194150 C 27 A2U913-194148 C 2 A2U913-194265 D

2.08 kg

Eimco A2U913-194265 Hydraulic cylinder bush, Greasable 2.78 kg Hydraulic cylinder bush, Greasable 2.78 kg

3.002” 3.78” Heavy Wall Bush / Boss, Greasable 3.005” 2.636” 4.66 kg Eimco A2U913-194149 3.139” 2.53” D10 Lift Arm Bush 3G8052

Dimensions shown are for the KSet Bush, not for nearby OEM numbers

KSet Engineers design bushes to suit market requirements PRICES DO NOT INCLUDE GST SUBJECT TO CHANGE Example: A neaterNOTICE fit to shafts and pins.

PRICES ARE WITHOUT

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

2pa 43 8pa 40 2 FIG.8 S’vik $407 0pa 44 Taper Sides S’VIK$465 PG104 0pa Open helic grve 4mm x 30mm pitch

C 8 Bushes 6pa 37

and Pins C 2+14 Seals 7pa and 43 Shims D+8 0pa

Cutters and Tools

N 0pa Product OrderSvik$609 $150 C Minimum 4 2pa 82 R100.23x5 PG104

Prices subject to change without notice C 13 4pa 20 CE$19.84 Quantity Discounts Available Only upon request provided all outstanding invoicesare settled within 7 Days Discount for 4 or more of any line item $7 Discount for 10 or more of any line item $10 Discount for 20 or more of any line item $14

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 24 September 2015

Case Hardened Bushes - Precision Ground

Suit 80mm Diameter Shaft Stock, Usage, Mfr, 30-06-14 $

KSet Part No. Price Outside

EX GST

Inside

Length

B85-80X70 $ 99 85.07mm 80.15mm 70.0mm

.35kg

Manufacture Notes

Locations 25-08-2015 Atlas Copco B 11

3125 2388 00

11pa 36

12,069

$ 16,724 JN31011 - QMRC

D144162 Flange 94x4 Case D 13 0pa CASE $45 2006 89.99mm PFERRD Economy Rolls D144170 Case 590 D 9 0pa CASE $42 2006 89.99mm

Complete PFERRD range available 114318A1, 192559A1 Case 580 B 14+44 J50624 22pa 14 89.99mm CASE $33 2006 4196105 Hitachi EX350 C 33 15pa 18 2015 KSet19pa Popular Selection Hydraulic ram,Rod end Greasable A 68 18

B90F80-17 B90-80-20 B90-80-30 B90-80-50 B90G80G60

$ 44 $ 44 $ 48 $ 68 ! $ 88

90.00mm 90.00mm 90.01mm 90.17mm 90.06mm

80.19mm 80.20mm 80.18mm 80.29mm 80.15mm

17.0mm 20.0mm 29.6mm .32kg 50.0mm .53kg 60.0mm .59kg

B90-80-65 B90-80-80 B90G80G90 B90G80G100 B90-80G140

$ 96 $ 98 $ 110 $ 120 $ 160

90.10mm 90.10mm 90.08mm 90.10mm 90.07mm

80.15mm 80.15mm 80.15mm 80.15mm 80.15mm

65.0mm 80.0mm 90.0mm 100.0mm 140.0mm

B95-80-40 B95-80-55 B95-80-65 B95G80X65 B95G80X66

$ 70 $ 96 $ 98 $ 98 $ 98

95.15mm 95.05mm 95.05mm 95.18mm 95.18mm

80.25mm 80.15mm 80.15mm 80.29mm 80.29mm

39.9mm 0.88kg 4352398 55.0mm 0.88kg 4107838 65.0mm 1.04kg Hitachi 64.9mm 1.04kg 4409178 64.9mm 1.04kg 4443882

B95G80X67 B95G80X68 B95-80-70 B95G80X70 B95G80X75

$ 106 ! 95.14mm $ 98 ! 95.12mm $ 89 95.10mm $ 110 95.12mm $ 98 95.08mm

80.31mm* 67.0mm 1.05kg 207-70-53150 Komatsu OF8 A 7+46 J50310 43pa 30 16mm EXT. OF8 PG69 80.20mm 67.0mm 1.06kg $ REDUCED $ Less Clearance B 20 11pa 30 Code 80.19mm 70.0mm 1.16kg Hitachi EX200-Bush-J D 12 Size 4pa 30 EX200-BUSH-J =Price 68 mm long mmJ50310 x 50 m TL-ER 40A Ext,OF8 60 TOO $ 30 80.18mm 70.0mm 1.11kg Caterpillar CAT320C-Bush-K A 40 22+34 14pa 31 12mm TIGHT? 40 mm x 50 m TL-ER $ 302014 80.31mm 75.0mm 1.18kg Komatsu PC200, 220-Bush-HL C 12 13pa 32 40A 80 NEW

B95G80G78 B95G80X78 B95G80X79 B95G80G80 B95-80X80

$ 90 $ 98 $ 98 $ 98 $ 98

80.28mm 78.0mm 80.33mm* 78.0mm 80.20mm 78.0mm 80.25mm 80.0mm 80.30mm* 80.0mm

B95F80X80 B95G80X81 B95-80G85 B95G80X85 B95G80X86

$ POA 95.13mm $ 98 95.12mm $ 80 95.21mm $ 120 95.05mm $ 106 95.09mm

80.15mm 80.20mm 80.23mm 80.15mm 80.22mm

80.0mm Flange 160x8 Kobelco K909A Z 0pa DIP/BKT, 116x10 REC 90x5 81.0mm 1.30kg TESK Fig. 8 2001 A 62 41pa 32 85.1mm 1.32kg Cat-345-Bush-I 4I-6897 N 2+12 J50625 0pa 36 HITACHI EL200-BUSH-J 85.0mm 1.32kg EX200-Bush-B SE210-Bush-K,H B 39 39pa 36 HITACHI EL200-BUSH-J 86.0mm PC220-Bush-B,C,D,E,G 2BF8 13W Ext A 63 DISCOUNT 58pa FOR 36 707-76-80020, 80010, 206-70-55280 QUANTITY

B95F80X88 B95-80X89 B95G80X90 B95G80X91 B95G80X95

$ 166 $ 108 $ 108 $ 120 $ 120

95.13mm 95.16mm 95.14mm 95.12mm 95.10mm

80.15mm 80.29mm 80.33mm 80.20mm 80.16mm

88.0mm 89.0mm 90.0mm 90.0mm 95.0mm

B95F80X95 B95-80X98 B95G80G100 B95-80X100 B95G80X100

$ 128 $ 130 $ 98 $ 130 $ 140

95.11mm 95.15mm 95.09mm 95.10mm 95.13mm

80.35mm 80.14mm 80.16mm 80.18mm 80.16mm

95.0mm 98.5mm 100 mm 100 mm 100 mm

95.10mm 95.08mm 95.12mm 95.18mm 95.13mm

B95G80G104 $ 140 95.10mm 80.15mm 104 mm B95G80X110 $ 138 ! 95.13mm 80.18mm 110 mm B95G80X125 $ 190 95.13mm 80.18mm 125 mm

.68kg

Suit Hitachi Plain Bush A 37 28pa 22 Matbro 38738 C 18+30 J50624 26pa 22 .92kg Kobelco SK210-Bush-HR B 2+20 J50624 18pa 28 1.02kg Matbro 504227 C 82 37pa 32 1.46kg Volvo BML90C Small Z Link C 25 14pa 45 .83kg

1.23kg

1.20kg 1.25kg 1.24kg 1.31kg

ZX200-Bush-HR-HL N 1 +30 J5826 19 6 Required? RDW$48 Hitachi A 20 +44 J50310 41pa 21 Excavator Bush C 17+24J50826 21pa 22 ZX200-3-Bush-J N +16 O/BF8 4pa Groove Offset=12mm Hitachi ZX200-3-Bush-K N +16 O/BF8 4pa 7w Groove Offset=3.5mm

40 mm x 50 m TL-ER 40A 120

$ 30

40 mm x 50 m TL-ER Hydraulic ram eye greasable bush C 11 4pa 27 40A 180 $ 30 Plus GSTPG68 707-76-80020 PC220-Bush-HR C 12+28 J50625 23pa 32 2xBF8 80.46Ø Firmer Fit Less Clearance C 12+24 18pa 32 Mosely tilt bkt Caterpillar CAT320C-BUSH-HL,J A 29 15pa 28 CE$62 2001 20Y-70-32351 Komatsu 21K-70-12161 B +44 J50310 26pa 32 2xOF8 80.40Ø PG68

BUSHINGS

2 kg

Flange 140x8 Greasable external N 12

8pa 80

Quantity Discounts Available only upon Kobelco LC12B01763P1 SK350-BUSH-I BF8 B 18 2pa 39

request provided all outstanding invoices 1.39kg PC200,220-Bush-K 205-70-67150 OF8 A 27+40J50826 32pa 38 Was 80.40Ø PG69 are settled within 7 Days Kobelco SK220 “HL”, SK330-8 “I” C 16 5pa 39 <For “I”: OF8, Ext ID groove Discount for 4 or more of40 any ea Eng 1.50kg SK220-Bush-HR HD700-Bush-HR C 50

18pa line item $ 7.00KTR Discount for 10 or more of any line item $ 10.00 ea

2 kg

for 20 or more of65 any $ 14.00 eaPg68 Flange 130x7 205-70-72130 PC220-Bush-J BDiscount 11+34 J50408 19pa line item F2=113x15, H95x12, 1.56kg Kawasaki KLD 80 Z1 D 2 Overnight deivery 3pa to Darwin 36 Northern Discontinue Territory ?

1.64kg TESK Greasable Bush B 8 19pa 30 KLD 80 Z1 = 98.5 long 1.64kg Samsung SE210-BUSH-J OF8 C 14 8pa 41 Samsung 1.64kg HD700“HL” CAT320C-Bush-HR C 18 5pa 46 CAT320C “HR” 1.68kg

Caterpillar 325B-Bush-J C 15 7pa 38 087-5847 $ REDUCED $ TESK 2009 BF8 C 13 2pa 46 Common request B95g80X125 and52Bushes 1.93kg Komatsu 205-70-71330 2x7Ø 2F8 C 6+20Pins

11pa 19w Ext PC200-3 Boom

Shims and Seals 1.63kg

Bushes for 80mm Diameter Shaft continued next page...

VOLVO SMALL Z LINK

Dimensions shown are for the KSet Bush, not for nearby OEM numbers KSet Engineers design bushes to suit market requirements Example: A neater fit to shafts and pins.

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

Tools and Only Cutters Quantity Discounts Available upon request provided all outstanding invoicesare settled within 7 Days Minimum Product Order $150 Discount for 4toorchange more of any line item $8 Prices subject without notice Discount for 10 or more of any line item $11 Discount for 20 or more of any line item $14

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 25 September 2015

Case Hardened Bushes - Precision Ground

Suit 80mm Diameter Shaft Stock, Usage, Mfr, 30-06-14 $

KSet Part No.

Price

Outside

Inside

B98G80X67 B98G80X78 B98G80X90 B100-80-21 B100F80-46

$ 130 $ 140 $ 150 $ 80 $ 50

98.13mm 98.13mm 98.13mm 100.00mm 100.00mm

80.20mm 80.20mm 80.20mm 79.97mm 80.21mm

EX GST

Length

Manufacture Notes

Locations 25-08-2015

67.0mm 78.0mm 1.50kg 90.0mm 1.70kg 20.7mm 0.46kg 46.0mm

O.S. PC220-Bush-HL OF8 O.S. PC220-Bush-HR BF8 O.S. PC200,220-Bush-K OF8 Case580SLE 1986794C1 Flange 104x4.15 Case D151059

12,069

$ 12,873

C 10 PFERRD Economy Rolls 6pa 37 CComplete PFERRD range available 6+12 J50904 5pa 40 C 5+12 J50904 5pa 44 C 18 KSet Popular 8pa 26 TSelection runnion 4mmX45° Int One End D 4 0pa 26 CASE $50

Heavy Wall Bushes for 80mm Diameter Shaft B100G80G50 B100-80-80 B100G80G80 B100G80X90 B100G80X95

$ 74 $ 98 $ 110 $ 130 ! $ 160

100.13mm 100.13mm 100.13mm 100.13mm 100.13mm

80.21mm 80.22mm 80.22mm 80.21mm 80.21mm

50.0mm 80.0mm 80.0mm 90.0mm 95.0mm

1.06kg

TESK 2010 Greasable Bush C 9+24 J50904 12pa 30 TESK Plain Bush B 10+24 J50904 11pa 33 1.81kg TESK 2010 Greasable Bush A 57 34pa 35 1.98kg $ REDUCED $ Cobra ZL 50G C 8+18 J50904 9pa 45 2.09kg TESK 2010 BF8 C 6+18 J50904 9pa 47 1.77kg

Chinese Wheel Loader

B100G80X110 $ 170 100.13mm 80.20mm 110 mm 2.42kg O.S.TESK 2BF8 B 11+20 J50904 13pa 52 B100G80X139 $ 220 100.13mm 80.23mm 139 mm Samsung SE210-LC-BUSH-J OF8 C 12 6pa 60 B105G80X95 $ 164 ! 105.13mm 80.17mm 95.0mm 2.69kg $ REDUCED $ TESK BF8 B 51 28pa 53 B110F80X95 $ 185 110.06mm B110G80G100 $ 200 110.13mm B110G80X110 $ 214 ! 110.13mm B115G80G96 $ 130 ! 115.08mm

80.32mm 80.27mm 80.25mm 80.05mm

95.0mm 99.9mm 110 mm 96.0mm

3.3 kg

3.48kg

Flange130x7 SK200,PC220-7-Bush-J B 13+52 J50903 34pa 74

F130 x N7 R95ØX12

O.S.TESK Greasable Bush C 4Size +10 J50905 4pa 49 Code 3.84kg $ REDUCED $ O.S.TESK BF8 C 5+20 J50905 14pa 66 40 mm x 50 M TL-ER 40A 60 4.90kg Heavy Wall Bush / Boss, Greasable N +12 J50408 40 mm x 50 M TL-ER 40A 80

40 mm x 50 M TL-ER 40A 120 40 mm x 50 M TL-ER 40A 180

Plus GST CAT983 D 11 4pa 27 B95G83G82=Case721-Bush-J Greasable Bush D 21 2pa 27

Suit 3.25” Diameter Shaft B95-83-70 B95G83G73 B95F83-78 B95G83G83 B95G83G95 B95G83G102

$ 78 $ 78 $ 74 $ 66 $ 58 $ 96

3.752” 3.753” 3.751” 3.752” 3.753” 3.754”

3.257” 3.257” 3.255” 3.261” 3.261” 3.257”

B99G83G108 $ 98

3.879”

3.257”

2.75” 2.87” 3.05” 3.27” 1.13kg 3.74” 1.29kg 4.00” 1.41kg

Price $ 30 $ 30 $ 30 $ 30

7S3863 Case Loader Flange Bush 105mm x 5.7 3G8779 CAT960F, 962G-Bush-L,K 3G9191 Caterpillar Tesk 2009 Greasable Bush

D 4 0pa Tub Grinder DISCOUNT C 5+28 J50826 15pa FOR 26 QUANTITYCE$31 BUSHINGS D 13 3pa 26 C Quantity 41 5pa 37 Purcellsonly 16 Inv5939 Discounts Available upon request provided all outstanding invoices 4.25” 1.53kg Tesk 2010 CAT966 Track Loader C 6 0pa 37 are settled within 7 Days Discount for 4 or more of any line item $ 7.00 ea

Bushes for 85mm Diameter Shaft

Discount for 10 or more of any line item $ 10.00 ea

B95-85-75 B95G85G80 B95-85-100 B95G85X125

$ 88 $ 76 ! $ 100 $ 140

95.05mm 95.08mm 95.05mm 95.10mm

85.15mm 85.15mm 85.15mm 85.25mm

75.0mm 80.0mm 0.93kg 100 mm 1.15kg 125 mm

TESK 2003 Plain Bush $ REDUCED $ Greasable Bush TESK 2006 Plain Bush Some WA420s WA420-Bush-L,K

Discount or more of C 14 for 20 13pa 27 any line item $ 14.00 ea D Overnight 14 1pa 31 Northern Territory deivery to Darwin C 19 4pa 35 C 13 2pa 61 EXT 19W 2F8

B100G85X48 B100F85-50 B100-85G80 B100-85G85 B100G85G85

$ 74 $ 164 $ 110 $ 90 $ 110

100.10mm 100.03mm 100.10mm 100.10mm 100.10mm

85.18mm 85.07mm 85.20mm 85.18mm 85.20mm

48.0mm KATO 900-BUSH-HL BF8 50.29 1.09kg Flange 125x7.47 S andvik 26433448 80.0mm 1.35kg 419-70-11890 WA320-Bush-A 85.0mm 1.43kg 424-70-11810 WA420,450-J 85.0mm 1.42kg Komatsu WA420-Bush-L,K

D 3+10 J50904 3pa 15 097-4200-9000 900SEV,V2 A 32+110 207pa 52 J50627 F125 x N7.4 C 0+14 J50305 6pa 29 D 13 2pa 30 9W Int B 50 9pa 34

B100N85G85 $ 120 ! 100.12mm B100G85X98 $ 168 100.10mm B100G85G100 $ 120 100.07mm B100G85X105 $ 120 100.10mm B103G85G100 $ 140 103.10mm B115G85G96 $ 130 ! 115.08mm

85.22mm 85.18mm 85.12mm 85.18mm 85.18mm 85.05mm

84.8mm 1.36kg 98.0mm 1.63kg 100 mm 1.67kg 105 mm 100 mm 96.0mm 3.48kg

423-70-21810 WA380,420-Bush-J KATO 900-Bush-HDL BF8 424-70-11820 WA420-Bush-L,K KATO 800-Bush-J OF8 O.S. TESK Greasable Bush Heavy Wall Bush / Boss, Greasable

Dimensions shown are for the KSet Bush, not for nearby OEM numbers KSet Engineers design bushes to suit market requirements Example: A neater fit to shafts and pins.

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

34 Bushes MudmapsPg120 CC 310 Pins 12pa and 3pa 48 +18 J50305

B 12+28 Shims and Seals J50904 17pa 35 C 11 Tools and 0pa 38 Cutters Kato800=B100-85X105 D 1 4pa 32

Minimum Product Order $150 +10 J50408 NPrices subject to change without notice

097-4200-8000 900SEV,V2

Quantity Discounts Available Only upon request provided all outstanding invoicesare settled within 7 Days Discount for 4 or more of any line item $8 Discount for 10 or more of any line item $11 Discount for 20 or more of any line item $14

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 26 September 2015

Bushings - Hardened Steel - Precision Ground

Suit 3 1/2” Diameter Shaft Stock, Usage, Mfr, 30-06-14 $

KSet Part No. Price

Outside

Inside

Length

Manufacture Notes

B99-89N100 B100-89-57 B102F89-43 B102-89-44 B102-89-49 B102-89-51 B102-89G64 B102-89G76

$ 140 $ 50 $ 88 $ 82 $ 82 $ 88 $ 98 $ 98

3.921” 3.954” 4.002” 4.004” 4.003” 4.002” 4.006” 4.002”

3.508” 3.504” 3.506” 3.521” 3.507” 3.505” 3.510” 3.506”

3.94” 1.69” 1.69” 0.52kg 1.75” 0.67kg 1.93” 0.73kg 2.00” 0.77kg 2.50” 0.95kg 2.97” 1.15kg

2 ONLY Int. Helical Groove Plain Bush 3 only Flange Bush A2U913-194032 Caterpillar Sub for 4J2379 Caterpillar Sub for 5J1193 TESK Plain Bush Caterpillar Internal Groove Caterpillar Sub for 7K9576

B102-89-76 B102G89G76 B102G89G77 B102G89G82 B102-89G94

$ 60 ! $ 88 ! $ 72 $ 78 $ 68

4.003” 4.002” 4.004” 4.003” 4.002”

3.518” 3.506” 3.510” 3.511” 3.506”

3.01” 2.99” 3.00” 3.27” 3.70”

B102-89-95 $ 62 !

B102G89G95 $ 90 B102G89X101 $ 110 B102G89X108 $ 124 B102G89G111 $ 98

4.003” 4.005” 4.004” 4.004” 4.007”

3.507” 3.516” 3.505” 3.505” 3.517”

3.75” 3.75” 4.00” 1.45kg 4.25” 1.55kg 4.36” T

EX GST

B103G89N102 $ 110 4.032” 3.506” 4.00”

Locations 10-09-2015 Z 2

0pa

Long life multipurpose grease that is specially designed 2pa 14 Suitable for a variety of Cfor6 extreme bearing applications.

N automotive 12 applications,including 0pa wheel bearing and

general chassis lubrication

D 11 1pa 14 Code : GR-XTB2 CProduct 5 +24J50823 12pa 28 $10 ea + GST C 4 +20J50823 8pa 26 CE$24.50

$ REDUCED $ Sub for IJ5304 C 45 Caterpillar Sub for 7K9576 C 22 1.15kg Caterpillar Sub for 9J6549 D 4 1.26kg Caterpillar Sub for 3G7624 D 8 1.44kg Caterpillar Sub for 5K7037 D 17

9pa 25 4pa 25 2pa 30 4pa 36 4pa 30

1.15kg

1.45kg

Joy

$ 5,994

Z Grease for0pa Hardened Bushes 3 D 23 Renolit XTB2 0pa 28 450gF120x5Pg67

1.15kg

$ REDUCED $ CAT983 7J7887 Caterpillar Sub for 9J7099 TESK 2010 Greasable BF8 Scandinavian Greasable BF8 9J7100 CAT-966G-Bush-D

2,758

C 13 +20J50823 1 4pa 30 D 7 3pa 32 C 7 +20J50823 13pa 50 D 13 2pa 50 D 3 0pa 44

D11 Blade x 16 CAT$161

CE dont sell them

+ one short 97mm CE$43 ‘09

Hydraulic Cylinder C +6+4

$ 48 $ 98 $ 90 $ 88 $ 98

4.133” 4.129” 4.128” 4.129” 4.128”

3.503” 3.505” 3.512” 3.505” 3.512”

1.08” T 3.00” 3.24” T 3.50” 3.70” T

CAT-950-BUSH-BR Ext. Groove TESK 2004 Greasable CAT-966G-BUSH-L,K 4V8520 TESK 2002 Greasable CAT-980C,F,G-BUSH-D,E 1V8242

D 2 0pa 9K9159 CE$27.62 C 3+20J50823 10pa 38 C 2+16J50823 6pa 40 4V8520 CE$40 C 7+26J50823 20pa 40 16toCountrylink D 4 4pa 40 1V8242 CE$59

B104G89G102 $ 120 B104-89G110 $ 98 B104G89G111 $ 98 B104-89G120 $ 98

4.129” 4.128” 4.128” 4.128”

3.505” 3.510” 3.512” 3.513”

4.00” 1.kg 4.33” U 4.37” 4.75”

Caterpillar Sub for 6K71571 CAT-950-962-BUSH-A 3V2333 4 ONLY Greasable CAT-966G 972-BUSH-A Int. Groove

D 5 D 1 D 4 D 1

B108-89-46 $ 88 B108-89-57 $ 87 B108-89-64 $ 97 B108-89-67 $ 99 B108-89-101 $ 130

4.253” 4.253” 4.253” 4.253” 4.253”

3.507” 3.508” 3.507” 3.510” 3.507”

1.83” 2.24” 1.35kg 2.50” 2.65” 1.60kg 3.98” 2.30kg

CAT983 Plain Bearing 4J2379 CAT983 Plain Bearing 8K7677 CAT Plain Bearing 5K4787 CAT983 Plain Bearing 8K7613 TESK 2002 Plain Bearing

D 8 C 8 C 3 C 13 C 5+14 J50628

B104G89-27 B104G89G76 B104G89G82 B104G89G89 B104G89G94

0pa 40 2pa 43 2pa 2pa 53

(

4pa 28 0pa 29 9pa 29 0pa 33 8pa 51

CE$43 Westrac$141 4V8673 CE$55 4J2379 CE $27.83 8K7677 CE $54.60 5K4787 CE $28.30 8K7613 MFR:$32

B110-89X75 $ 130 ! 4.332” 3.505” 2.95” 1.88kg $ REDUCED $ Eimco A2U130-194277 A 89 45pa 41 S’VIK $265 PG.98 B112-89-68 $ 110 4.411” 3.513” 2.66” 185-7221 Plain Bearing Tillys $55

Grease for Pin Steel B114-89-38 $ 80 4.502” 3.504” 1.50” CAT 28 Ripper Plain Bearing D Grease 1 0pa Bushes4 USED for Excavator B114-89-51 $ 70 4.507” 3.529” 2.00” 1.58kg 4T9751 Ripper Group Bearing D 2 Maitland Hunter 0pa Valley NSW B114G89G57 $ 98 4.502” 3.508” 2.25” 1.76kg TESK 2003 Greasable C 11 4pa 32 B114-89-64 $ 98 4.503” 3.507” 2.50” 2.00kg CAT983 Sub for 7K1513 D 13 0pa B114-89-73 B114-89-76 B114-89G85 B114G89G96

$ 98 $ 98 $ 98 $ 130 !

4.504” 4.505” 4.504” 4.504”

B115G89X114 $ 180 4.530” B120-89-75 $ 120 ! 120.10mm B121-89X108 $ 170 4.754” B125-89-80 $ 130 ! 125.10mm

3.506” 3.508” 3.517” 3.502”

2.87” 2.30kg 3.00” 2.39kg 3.35” 3.78” 3.05kg

3.510” 3.506” 3.508” 3.506”

4.50” Logmax Greasable BF8 2.95” kg Heavy Wall Bush Plain 4.25” 4.35 kg Type X Bush Greasable BF8 3.15” kg Heavy Wall Bush Plain

Wear Life of Pin Materials

4140 Hardened & Tempered 29 Rockwell C as available from steel merchants

Caterpillar Sub for 7J0052 TESK 2009 Plain Bushing Caterpillar D9 Sub for 3G6402 Heavy Wall Bush/Boss Greasable

K1045 - INDUCTION HARDENED 58 Rockwell C

58 Rockwell C (615 Brinell) resists wear about 10 times better and longer than 29 Rockwell C

4140 - INDUCTION HARDENED 58 Rockwell C - Very Resistant to Breakage

58 Rockwell C (615 Brinell) resists wear about 12 times better and longer than 29 Rockwell C

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

C 25 DISCOUNT 6pa 32 QUANTITY FOR C 9 8pa 32 BUSHINGS Discounts Available only upon$65 C Quantity 4 0pa Tillys all outstanding invoices Nrequest 10 provided0pa are settled within 7 Days Discount for 4 or2pa more of50 any19w line Ext, item 112.7Ø $ 8 ea 2X8Ø C 5 Discount for 10 or moreAtof Gosford any line itemJN41011 $ 11ea Z Discount 6 for 20 or more of any line item $ 14 ea D 1 2pa 45 Z 6 At Gosford JN41011

Pins and Bushes

Shims and Seals Tools and Cutters

Minimum Product $150 Discounts Available Order Only upon request Prices subject to all change withoutinvoices notice provided outstanding

are settled within 7 Days Discount for 4 or more of any line item $9 Discount for 10 or more of any line item $15

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 27 September 2015

Case Hardened Bushes - High Tensile 20Mn V6

Suit 90mm Diameter Shaft Stock, Usage, Mfr, 30-06-14 $

KSet Part No. Price

EX GST

Outside

Inside

Length

Locations 18-08-2015

$ 16,177

0.80kg

TESK 2011 Plain Bush C 19 5pa 27 Probore crushers Bushes FLange Bush FBL - 503140 C 8 Grease for 1pa Hardened 81 Renolit XTB2 450g 0.86kg TESK 2010 Greasable C 45 8pa 29 Long life multipurpose grease that is specially designed 0.90kg $ REDUCED $ Plain Bush D for24 2pa 30 Suitable for a variety of extreme bearing applications. automotive applications,including wheel bearing QUARRY and 1.15kg Volvo L 180 2 Required C 27 15pa 34 WALLACE

B100-90-70 $ 110 100.12mm B100F90N74 $ 166 100.06mm B100G90G75 $ 140 100.10mm B100-90-80 $ 98 ! 100.12mm B100G90G100 $ 180 100.10mm

90.15mm 90.13mm 90.15mm 90.15mm 90.15mm

B100G90G137 $ 210 ! 100.10mm B105G90G49 $ 98 ! 105.15mm B105G90G50 $ 120 105.12mm B105-90-55 $ 114 105.10mm B105-90-60 $ 117 105.10mm

90.16mm 137mm 2.44kg 90.23mm 49.3mm 0.90kg 90.25mm 50mm 0.90kg 90.16mm 55mm 1.00kg 90.20mm 60mm 1.12kg

70mm 74mm 75mm 80mm 100mm

Manufacture Notes

21,054

1.12kg

general chassis lubrication

Code : GR-XTB2 $10 + GST $ REDUCED $ Volvo L 180 2 Rqd C Product 6+33J50822 17pa 41 Forea B100G90G280 ZX350-Bush-I Offset Groove D 9 0pa Groove 19 frm Cfr end - 4438771 Greasable KATO 1250-H,G,L C 11 8pa 26 107-4161-3000 1250SEV Hitachi EX300-BUSH-I C 31 27pa 26 I TESK 2002 Plain Bush C 27 2pa 28

B105-90-70 B105-90X70 B105G90X70 B105G90X85 B105G90X88

$ 90 ! 105.13mm $ 98 ! 105.10mm $ 128 ! 105.10mm $ 130 ! 105.18mm $ 128 ! 105.14mm

90.27mm 90.16mm 90.16mm 90.28mm 90.16mm

70mm 70mm 70mm 85mm 88mm

$ REDUCED $ Hitachi 4203425 C 20 5pa 31 EX 270&200 7CFRx5° Komatsu PC200-BUSH-F 2xOF8 B 11+26J50823 15pa 35 205-70-66550,205-70-72180 1.24kg $ REDUCED $ 2xBF8 B 64 22pa 36 1.45kg Hitachi EX350-F - EX200-B,C,F B 38 7pa 42 3038451 BF8 18mm W Ext.Groove 1.55kg Komatsu PC300-BUSH-HR C 29 4pa 42 207-63-76170

B105G90X89 B105G90G90 B105G90X90 B105-90X92 B105G90X95

$ 80 ! 105.14mm $ 110 105.13mm $ 128 105.14mm $ 128 105.10mm $ 128 105.13mm

90.30mm 90.18mm 90.16mm 90.23mm 90.30mm

88mm 90mm 90mm 92mm 95mm

1.57kg

1.26kg 1.25kg

$ REDUCED $ Greasable Z 1 TESK 2001 Greasable C 21 1.59kg Komatsu PC300-BUSH-HL, K A 30 1.62kg Komatsu PC300-BUSH-I OF8 C 26 1.69kg SK330-6-K & KATO 1250-HL A 63 1.60kg

Kobelco SK330-6 “HL” BF8 B 21 $ REDUCED $ VOE1451 7940 2BF8 N 17 Hitachi ZX450 Light Duty 0937502 N 1 Kato 1250 “G” Greasable C 23 Kobelco SK220-F & SK330-8-HL C 14

6pa 15 8pa 38 37pa 45 12pa 45 23pa 47

B105G90X102 $ 160 105.12mm B105G90X105 $ 140 ! 105.11mm B105G90X109 $ 160 105.09mm B105G90X110 $ 160 105.10mm B105G90X112 $ 160 105.11mm

90.20mm 102mm 1.80kg 90.20mm 104.5mm 1.80kg 90.24mm 109.4mm 1.83kg 90.20mm 110mm 90.18mm 112mm 1.89kg

B105G90X114 $ 140 ! 105.14mm B105G90X114 $ 140 ! 105.14mm B105G90X115 $ 160 105.14mm B105G90X120 $ 210 105.13mm B105G90X130 $ 174 105.13mm

90.27mm 90.27mm 90.21mm 90.28mm 90.25mm

114mm Kobelco 114mm Kobelco 115mm Kobelco 120mm 2.11kg 130mm 2.24kg

LC12B01781P1 SK350-8-Bush-HL N 18 0pa LC01V00006S023 SK350-8-Bush-HR C As above above 55 SK330-8-HR,J Kato 1250-HR C 8 7pa 55 VOE 14880984 Kato 1250-Bush-B C 21 11pa 56 Komatsu PC200-Bush-A C 8+22 J50628 15pa 64

B106G90X90 $ 65 ! 105.89mm B106G90G90 $ 101 106.18mm B106M90G90 $ 102 106.18mm B106M90G100 $ 110 106.18mm

90.25mm 90.25mm 90.25mm 90.25mm

90mm 90mm 90mm 90mm

$ One Only $ Laser Scraper CAT-325-BUSH-J CAT-333-BUSH-J

COOTE MISTAKE 207-70-33160 207-70-32150 707-76-90180 207-76-90130

13pa 51 SK330-8 “I” = B95G80X91 0pa 55 10wExt2x8 Ø 9wInt+2Bf8 New 54 7pa 54 KATO 1250 SEV “G” 3pa 55 OF8, SK330-HL,K: is 113mmWide BF8 SK350LC-8-BUSH-HR 2Bf8329-1202-3001 SEV 205-70-65762 BF8

Greasable BF8 Z 1 4pa MISTAKE Bucket Bush C 45 17pa 38 Ag Laser 20+14 External slot C 17 Grease 0pa for 51 Pin WasSteel B106G90X90C.E$36=7Y3553 Grease for Excavator Bushes External slot D 16 0pa 61

Maitland Hunter Valley NSW

Heavy Wall Bushes for 90mm Diameter Shaft KSet Part No. Price

EX GST

Outside

B110G90X73 $ 154 110.14mm B110-90-80 $ 88 ! 110.12mm B110-90X100 $ 199 110.14mm B110G90X100 $ 170 ! 110.15mm B110F90X102 $ 228 110.18mm B110G90N113G $ 210 110.02mm

Inside 90.21mm 90.15mm 90.21mm 90.24mm 90.24mm 90.05mm

Length

Locations

DISCOUNT FOR QUANTITY

BUSHINGS

Quantity Discounts only upon SEV 73mm 1.74kg KATO 1250 “K” Greasable C request 14 9pa 39 Available337-4201-6000 provided all outstanding invoices 80mm 1.84kg ! On Special !

Plain Bush Z 17

are 0pa settled30within 7 DaysProbore crushers 100mm 2.44kg KATO 1250 “J” 2xOF8 C 26 52 of any337-4201-0000 Discount for15pa 4 or more line item $ 8 eaSEV x 4 Discount for24pa 10 or more 100mm 2.40kg ! On Special !

Greasable BF8 A 71 53 of any line item $ 11 ea or more any line itemF150X8,127x12? $ 14 ea 102mm 3.24kg Flange Bush PC300-Bush-6-J 2F8 C 3Discount +20 for 20 7pa 98 of207-70-32140 113mm 2.66kg Twin Grooves A2U900-194346 N 9 10pa 72 10 in6mnths 2 ext. grooves

B115G90X100 $ 160 ! 115.13mm 90.18mm 100mm B120F90X100 $ 460 120.15mm B120F90X105 $ 340 120.18mm B120F90X106 $ 240 ! 120.14mm B120G90G110 $ 180 ! 120.14mm B120G90X110 $ 200 ! 120.14mm B120F90X126 $ 274 120.14mm

Manufacture Notes

3.12kg

$ REDUCED $

Greasable BF8 C 8or6?

5pa 53

Bushes and Pins SH300-2-BUSH-J O/BF8x2 C 2 4pa 216 KSV0462 - F184.7x10.6,R105.0x8

90.25mm 100mm 4.88kg Sumitomo 90.33mm 105.9mm 4.10kg Kobelco SK250/260-BUSH-J OF8x2 C 3 Seals 2pa and 1 28 ShimsF154.9 x 6.0 Tools 90.36mm 105.9mm 4.16kg Komatsu PC350-7-BUSH-J OF8x2 B 12 Cutters 12pa 106and F149.8X7.5,R105.04X15,207-70-72460 90.30mm 110 mm $ One Only $ Greasable D Minimum 1 2pa 50 Discontinue?

Product Order $150 90.29mm 110 mm 4.22kg $ REDUCED $ Greasable BF8 C Prices +20 J50626 14pa to 60 Sold 10 in Nov subject change without notice 90.29mm 125.7mm SK350LC LC12B01653P1 + LC12B01761P1 O,BF8 D 0pa SK350-8-BUSH-J

Dimensions shown are for the KSet Bush, not for nearby OEM numbers

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

Discounts Available Only upon request Discount for 4 or more of any line item $9 Discount for 10 or more of any line item $15

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 28 September 2015

Bushings - Hardened Steel - Precision Ground

Suit 95mm Diameter Shaft Stock, Usage, Mfr, 30-06-14 $

KSet Part No.

Price Outside

EX GST

Inside

Length

Manufacture Notes Locations 18-08-2015

17,142

$ 2,628

B110G95G70 B110-95-72 B110-95G80 B110-95X80

$ 98 $ 98 $ 98 $ 118

110.13mm 110.15mm 110.13mm 110.10mm

95.20mm 70.0mm 1.33kg 707-76-95050 WA320-Bush-D,E Grease C 12+16 12pa for36 Hardened 707-76-95050 Bushes 95.20mm 72.0mm 1.40kg Komatsu WA420-3 B 12 3pa 36 XTB2 450g 707-76-95040 Renolit life multipurpose designed 95.20mm 80.0mm Komatsu 707-76-95010 Long D 12 0pa grease that is specially 427-70-11870 extreme bearing applications. Suitable for a variety of 95.22mm 79.8mm 1.40kg 424-70-11770 WA380,420-Bush-C forC 15 2pa 44 BF8 424-70-11770 automotive applications,including wheel bearing and

B110-95X81 B110-95G90 B110G95X90 B110G95X95

$ 118 $ 110 $ 140 $ 120 !

110.13mm 110.13mm 110.13mm 110.14mm

: GR-XTB2 ea + GST 95.20mm 80.0mm Komatsu WA320-Bush-F OF8 Product D 4 Code 1pa 44 Can be up$10 to 100mm Long 95.20mm 90.0mm 385-1007-0591 W120-2 D 3+12 4pa 36 95.20mm 90.0mm 385-1007-0611 W120-2 C 6 3pa 42 95.20mm 95.0mm 1.80kg Komatsu WA470-Bush-J C 25 2pa 52 421-70-11241 Orig=Type X,K$99

B110N95G95 $ 120 ! 110.11mm 95.29mm 94.8mm 1.80kg 421-70-21240 WA470-1-Bush-J B110G95X105 $ 134 ! 110.14mm 95.20mm 104.9mm Komatsu WA420-Bush-A B110G95X115 $ 160 ! 110.14mm 95.27mm 114.9mm 2.16kg Komatsu WA470-Bush-L,K

general chassis lubrication

C 10 6pa 54 C 13 5pa 52 B 24 9pa 60

421-70-21240 PG.120 424-70-11890 421-70-11251 15W Ext pg120

Heavy Wall Bushes for 95mm Diameter Shaft B115G95X115 $ 180 ! 115.14mm 95.28mm 114.8mm

TESK 2009

Greasable BF8

D 1

2pa 52

Heavy Wall Bushes for 3.75” Diameter Shaft B114G96G88 $ 98 B114G96G107 $ 98

4.506” 4.505”

3.763” 3.48” 3.763” 4.21”

B121-96-76 $ 98 B121G96N140 $ 120

4.751” 4.754”

3.754” 3.00” 3.759” 5.50”

2.12kg

2.57kg

Caterpillar Caterpillar

CAT988B Bkt/Link 1V7036

D 7 C 9

4pa 44 4pa 52

1V6934 CE $62 wideExtNoInt CE $70

Caterpillar Caterpillar

CAT980-Bush-J CAT 980

Z 1 D 1

0pa 3pa 58

2 AT 3.761ӯ

Grease for Pin Steel Grease for Excavator Bushes

Maitland Hunter Valley NSW

Wear Life of Pin Materials

4140 Hardened & Tempered 29 Rockwell C as available from steel merchants

K1045 - INDUCTION HARDENED 58 Rockwell C

DISCOUNT FOR QUANTITY

BUSHINGS

58 Rockwell C (615 Brinell) resists wear about 10 times better and longer than 29 Rockwell C

Quantity Discounts Available only upon request provided all outstanding invoices are settled within 7 Days Discount for 4 or more of any line item $ 8 ea Discount for 10 or more of any line item $ 11 ea Discount for 20 or more of any line item $ 14 ea

4140 - INDUCTION HARDENED 58 Rockwell C - Very Resistant to Breakage

58 Rockwell C (615 Brinell) resists wear about 12 times better and longer than 29 Rockwell C

Pins and Bushes

Dimensions shown are for the KSet Bush, not for nearby OEM numbers KSet Engineers design bushes to suit market requirements Example: A neater fit to shafts and pins.

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

Shims and Seals Tools and Cutters

Minimum Product Order $150 Prices subject to change without notice

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 29 September 2015

Bushings - Hardened Steel - Precision Ground

Suit 100mm Diameter Shaft Stock, Usage, Mfr, 30-06-14 $

KSet Part No.

Price EX GST

Outside

Inside

Length

Manufacture Notes

Locations 18-08-2015

B110G100G78 $ 110 110.10mm 100.15mm 78.0mm T E S K 2 0 1 2 Greasable B110-100-100 $ 160 ! 110.12mm 100.16mm 100.0mm 1.29kg $ REDUCED $ Volvo L 180 4 Rqd B110-100G140 $ 220 ! 110.12mm 100.17mm 140.0mm $ REDUCED $ Volvo L 180 2 Rqd

17,142

$ 12,901

10pa for37 C +20 Grease Hardened Bushes 2pa 45 XTB2 WALLACE QUARRY VOLVO C 9 Renolit 450g CLong specially designed 14 life multipurpose 4pa 55 grease that isFOR B110G100G330 for extreme bearing applications. Suitable for a variety of automotive applications,including wheel bearing and 7pa general 26 chassis Use B115G100X130 381857S C 29 lubrication

B115-100-52 B115-100-60 B115-100-65 B115G100G70 B115G100X74

$ 90 ! $ 110 $ 90 ! $ 120 ! $ 140 !

115.12mm 115.15mm 115.15mm 115.13mm 115.15mm

100.20mm 100.30mm 100.29mm 100.21mm 100.20mm

51.7mm 1.04kg Hitachi ZX350-BUSH-HR,HL(6) 59.7mm 1.35kg Hitachi 3026075 65.0mm 1.29kg Hitachi EX300-BUSH-J 69.8mm 1.38kg Groove 25 frm Cfr ZX350-BUSH-J,K 74.0mm Komatsu PC45-BUSH-T

B115-100X79 B115G100X80 B115G100G85 B115G100X90 B115-100X95

$ 140 $ 148 $ 120 $ 156 $ 140

115.10mm 115.15mm 115.15mm 115.12mm 115.15mm

100.21mm 100.20mm 100.20mm 100.27mm 100.20mm

79.5mm Volvo VOE 1488 0987 O,BF8 80.0mm 1.49kg TESK 2001 BF8 85.0mm 1.65kg TESK 2003 Greasable 90.0mm 1.73kg Hitachi EX200-BUSH-A 95.0mm Komatsu PC400-BUSH-I

N 13 0pa A 55 12pa 46 C 5 6pa 36 C 13 +18 13pa 50 C 6 4pa 47

B115G100X95 $ 140 B115G100X98 $ 140 B115-100X100 $ 140 B115G100X105 $ 140 B115G100G108 $ 166

115.15mm 115.10mm 115.11mm 115.15mm 115.10mm

100.20mm 100.23mm 100.24mm 100.18mm 100.18mm

95.0mm 1.84kg Komatsu PC400-BUSH-B,K 97.5mm 1.90kg VOE 1451 7186 2BF8 99.5mm VOE1488 0988 EC460-BUSH-I 105.7mm 2.04kg Komatsu PC300-BUSH-C,D,E 108.0mm 2.11kg Hitachi ZX300-BUSH-HR

A 45 20pa N 13 N 10 2pa B 43 25pa C 16 3pa

52 208-70-13141 707-76-10230 58 9wExt&Int 2x8 Ø 2BF8 58 I 57 207-70-51440 707-76-10130 51

B115G100X108 $ 170 !

B115G100X109 $ 180 !

B115G100X110 $ 180 !

B115G100X111 $ 180 B115G100X120 $ 198 B115G100X130 $ 198

115.10mm 115.09mm 115.12mm 115.10mm 115.11mm 115.10mm

100.18mm 100.23mm 100.19mm 100.18mm 100.31mm 100.25mm

108.0mm 2.10kg Komatsu PC450-LC-BUSH-HL 109.4mm 2.11kg Hitachi ZX450 0937504 BF8 110.0mm 2.13kg CAT320 CAT 350 BF8 111.0mm 2.13kg TESK 2003 O/B FIG 8 120.0mm 2.31kg Volvo EC330CL VOE1488 0985 129.7mm 2.70kg Komatsu PC220-BUSH-A 2F8

C 4 4pa N 1+16 6pa C 11 9pa C 4+18 11pa N 9 3pa C 25 10pa

61 61 61 61 67 71

B116F100N87 $ 280 !

B116G100G100 $ 120 !

B116G100G120 $ 130 B116-100X130 $ 220 !

116.05mm 116.20mm 116.20mm 116.15mm

100.10mm 100.29mm 100.24mm 100.20mm

87.05 1.92kg Flange Bush FBL10-BUSH-J 100.0mm 2.25kg 7Y2397 CAT345-BUSH-K 120.0mm 2.55kg 087-5546 CAT450-BUSH-HR 129.7mm 2.70kg Caterpillar CAT325-BUSH-F

C 14 12pa N 1+12 1pa N 6+24 7pa D 3+10 3pa

Heavy Wall Bushes for 100mm Diameter Shaft KSet Part No. Price EX GST

Outside

Inside

Length Manufacture Notes

B117G100X95 $ 180 ! 117.12mm 100.20mm 95.0mm B120G100-21 B120G100-25 B120G100G70 B120-100-75

$ 85 $ 85 $ 140 ! $ 140 !

119.99mm 119.99mm 120.05mm 120.05mm

100.43mm 100.43mm 100.15mm 100.15mm

2.11kg TESK

DProduct Code :26 GR-XTB2 +12 4pa

$10100.32mm ea + GST was B 9 7pa 31 Harrybilt C 17 16pa 33 115.34X100.42,K3 3,4443885 sintered C 28 15pa 42 20T-70-71520

H$216 11w Ext was 100.32mm 206-70-61310,206-70-55240 pg68

163 503149 Bucyrus/Cat 56 116.22x100.31 CAT345-Bush-HL? 58 116.23 x 100.24 71 NewmanQ

Grease for Pin Steel

Maitland Hunter Valley NSW

4pa 55

21.0mm Case580 SLE 4W Ext D147280 Z 6 1pa 25.0mm Case580 SLE 4W Ext 101907A1 Z 1 2pa 70.0mm 2.00kg TESK 2013 Greasable C 20 1pa 75.0mm 2.04kg TESK 2002 Plain Bush C 26 14pa

B120G100X115 $ 160 ! 120.16mm 100.21mm 115.0mm 3.06kg $ REDUCED $ BF8 B 44 B120F100X125 $ 240 120.16mm 100.20mm 125.0mm 208-70-32140 Flange Bush PC400-BUSH-J D 10 B120G100X150 $ 260 120.16mm 100.22mm 150.0mm 4.00kg TESK 12mm W Ext BF8 C 9

22 22 39 43

TOP, OUTER 2X5Ø Lower,Outer 2X5Ø Make! Suits CAT

3pa 68 2pa 163 F166 208-70-32140 pg68 5pa 81 DJM FAB

B130F100X106 $ 338 130.18mm 100.32mm 105.8mm 4.68kg Flange Bush PC450-8-BUSH-J C 9 8pa 158 B130G100X114 $ 360 130.16mm 100.22mm 114.0mm 4.67kg TESK 2012 BF8 C 2+14 6pa 104 B135G100G100 $ 220 ! 135.15mm 100.22mm 100.0mm 4.96kg $ REDUCED $ Greasable C 16 1pa 80

MFR $49.50 208-70-13141 OF8

Locations 01-07-2015 $ 13,908 Grease for Excavator Bushes BF8 D 13

2009

Scanforest

F165.9 x 7.5 R115.02 x10.1 K$499

4 to MAAS suits Cat Import5

Dimensions shown are for the KSet Bush, not for nearby OEM numbers KSet Engineers design bushes to suit market requirements Example: A neater fit to shafts and pins.

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 30 September 2015

Case Hardened Bushes - High Tensile 20Mn V6 Suit 4 inch to 4.25” Diameter Shaft Stock, Usage, Mfr, 30-06-14 $

KSet Part No.

Price

EX GST

Outside

Inside

Length

Manufacture Notes

18/08/2015

Locations

11,140

$ 2,636

Suit 4” Diameter Shaft B114G102X76 B114-101-101 B114-102-102 B114G102X121 B114-102X127

$ 120 ! $ 140 $ 150 ! $ 180 $ 180

4.503” 4.504” 4.504” 4.504” 4.504”

4.009” 3.999” 4.009” 4.008” 4.006”

3.00” 4.00” 4.00” 4.75” 5.00”

B115G102G101 $ 200 4.542” B115G102X102 $ 220 4.538”

4.045” 4.006”

3.97” 4.00”

B118-102-50 B118-102-60 B118-102-76 B118G102G89

4.012” 4.013” 4.010” 4.007”

1.97” 2.37” 3.00” 3.50”

$ 100 $ 88 $ 98 $ 88

4.629” 4.630” 4.635” 4.630”

1.24 kg $

Reduced E imco A2U913 194013 C 49 2pa 42 Step 114.2x5 Hardened Bushes Sleeve, Static Fit CGrease 14 1pafor 47 sold 6 in April 2011, 2 in June 2012 Renolit 450g 1.70 kg $ Reduced $ 3mmStep D 23 5pa 47 XTB2A2U913-194355=B114-102-60A Long life multipurpose grease that is specially designed Tesk 2007 BF8 groove D

for 5 extreme 3pa bearing applications. Suitable for a variety of applications,including wheel bearing and 2.12kg Tesk 2007 10 Only Cautomotive 10 4pa 57 1.70 kg Tesk

general chassis lubrication

Product Code : GR-XTB2 $10 ea + GST

JOY 100163419 Was Al Bronze D 0pa Cram, Clevis=4.535”,fitted bore =4.040” JOY Hydraulic Cylinder Bush C +6+4 Caterpillar D11 MDS Caterpillar 4V2879 Caterpillar 145-8737 1.88 kg Hydraulic cylinder bush Greasable

C 7 4pa 34 C 7 8pa 37 4V2879 D 0pa 51 Tillys 16 Used D10, D11 Ripper C 20 4pa 39

Heavy Wall Bushes for 4” Diameter Shaft B120-102-50 $ 75 ! 120.12mm

4.006”

1.97”

B121-102-63 B121G102G70 B121G102G89 B121G102G108

4.0085” 4.007” 4.007” 4.007”

2.48” 2.75” 3.50” 4.25”

B125-102-65 $ 75 ! 125.12mm

4.006”

2.56”

$ Reduced $

B127-102X90 $ 150 5.006” B127-102G110 $ 165 ! 5.005” B127G102G127 $ 190 5.004”

4.007” 4.016” 4.006”

3.51” 4.33” 5.00”

Tesk TYPE X O/BF8 Groove C 9 5pa 65 $ Reduced $ Caterpillar 3T9658 D 11 0pa 66 Upsized OD For 5K7991 D 14 0pa 60

$ 160 $ 110 $ 120 $ 140

4.752” 4.754” 4.754” 4.754”

$ Reduced $

Bucket Z 6 At Gosford JN41011

0501-10097

Plain Bush 7K9545 Greasable 7K9532

1.78 kg Caterpillar 2.39 kg Tesk

Type I

2.90 kg Caterpillar

D 8 D 1 C 9 D 29

0pa 20.69x101.80x63.0 Cfr 2x45 deg 1pa 39 =B121G102-70 2pa 48 0pa 54 =B121-102G108 CE $83.12 Mfr $54

Bucket Z 6 At Gosford JN41011 D10N Case&FrameCE$155 5K7991=B121-102G127

Suit 105mm Diameter Shaft B120G105X75 B120G105X100 B120G105X110 B120G105X150 B120G105X157 B125G105X120

$ 120 120.15mm $ 180 120.15mm $ 210 120.15mm $ 250 120.17mm $ 290 120.15mm $ 230 ! 125.15mm

105.25mm 105.25mm 105.25mm 105.25mm 105.25mm 105.22mm

75.0mm 1.51kg Kato HD1250-BUSH-HL 100.0mm 2.03kg Kato HD1250-BUSH-C 110.0mm SH330-HR & HD-1250-D,E 150.0mm Unbored $ 200 157.0mm Kato 1250 BF8 Groove 120.0mm $ Reduced $ Cobra ZL 50G BF8

Suit 4.25” Diameter Shaft

Z 6 0pa KATO 1250, 1800 D 12 5pa 69 KATO 1250 SEV “C” C 8 3pa 69 KATO 1250 SEV “D,E” Z 1 0pa Z 1pa C 14 Grease Pin Steel 4pa 80for

Grease for Excavator Bushes

Maitland Hunter Valley NSW

B121G108-101 $ 120 121.26mm 108.50mm 101.0mm JOY External Groove Only D 19 0pa B121G108G118 $ 130 4.755” 4.264” 4.64” 1V8241 CAT988C,F,G-Bush-B,C D 4 2pa 61 B124G108G101 $ 150 4.881” 4.263” 3.97” Caterpillar 5J8363 D 1 0pa 68

CE $58.71 - Mfr $61 ‘09 CE $68

KSet Aftermarket Spares for: Caterpillar Crawler Parts Hitachi Spare Parts Kobelco Spare Parts Komatsu Spare Parts

Dimensions shown are for the KSet Bush, not for nearby OEM numbers KSet Engineers design bushes to suit market requirements Example: A neater fit to shafts and pins.

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 31 September 2015

Bushings - Hardened Steel - Precision Ground Suit 110 to 120mm Diameter Shaft Stock, Usage, Mfr, 30-06-14 $16,030

KSet Part No.

Price EX GST

Outside

Inside

Length

Manufacture Notes

Locations 18/08/2015

$ 14,190

Suit 110mm Diameter Shaft Hitachi 8 rqd EX350-Bush-B,C CKNIFE 39 16pa 24 4381855=Sint=125.38X110.44Ø

$ 14.00 ea Hitachi EX350-Bush-D,E D 18 0pa 24 4381859=Sintl=125.37x110.43Ø Yellow Ultra Grip 1.94kg 707-76-11030 WA480-5-Bush-B C 21 6pa 44 10W Int. 1.94kg Komatsu WA380,420-Bush-D,E CRetractable, 6 12pa 0.27 45 kg 707-76-11010 1.95kg Komatsu WA450,470-Bush-C CCode:TL-115Y 6 4pa 47 421-70-11381 50001

$ 108 $ 100 $ 130 $ 130 $ 146

125.18mm 125.18mm 125.06mm 125.07mm 125.14mm

110.28mm 110.28mm 110.22mm 110.18mm 110.28mm

45.0mm 53.8mm 89.8mm 89.8mm 89.9mm

0.97kg

B125-110G100 $ 136 B125G110X100 $ 170 B125G110X101 $ 140 B125-110G105 $ 135 B125G110X112 $ 190

125.10mm 125.15mm 125.20mm 125.16mm 125.13mm

110.21mm 110.20mm 110.34mm 110.28mm 110.28mm

99.5mm 100.0mm 100.0mm 104.8mm 112.4mm

2.13kg

B125G110X114 $ 190 B125G110X116 $ 168 B125G110G120 $ 200 B125G110X124 $ 210

125.18mm 125.07mm 125.15mm 125.12mm

110.31mm 110.34mm 110.30mm 110.24mm

114.0mm 115.7mm 119.6mm 124.1mm

2.40kg

B125G110X126 $ 210 B125G110X137 $ 220 B125G110X140 $ 160 B125-110X155 $ 240 B125G110X160 $ 220

125.15mm 125.13mm 125.15mm 125.14mm 125.10mm

110.20mm 110.24mm 110.20mm 110.35mm 110.39mm

126.0mm 136.5mm 140.0mm 154.8mm 160.0mm

2.68kg

2pa 73 4pa 80 16pa 80 207-70-61511,61610,31222,31220 4pa 85 BF8 & Centre 0pa 85 DJM C40 M11

B130F110X72 $ 250 B130G110X85 $ 240 B130G110X123 $ 284 B130G110X140 $ 290 !

130.22mm 130.20mm 130.22mm 130.15mm

110.31mm 110.26mm 110.28mm 110.20mm

72.0mm 85.0mm 2.52kg 122.6mm 3.96kg 140.0mm 4.15kg

425-70-11341 2 rqd WA500-Bush-F D 0pa 425-70-11343 F145 N24 Pg115 Jim 3079233 Hitachi ZX450 N 1+12 J50829 BF8 K7, S 1.5 14mm Ext 3060476 Hitachi ZX450-Bush-H,L,K N 1+12 J50829 BF8 K7, S 1.5 12mm Ext $ Reduced $ BF8 Groove A 10+27 25pa 95 J50829 10mm Ext

B135-110-90 $ 196 !

B135G110X99 $ 225 B135-110-100 $ 178 !

B135G110G110R $ 210 B135G110G120 $ 290

135.15mm 135.17mm 135.15mm 135.06mm 135.15mm

110.28mm 110.20mm 110.28mm 110.27mm 110.24mm

90.0mm 99.5mm 100.0mm 109.9mm 119.5mm

3.40kg

B140G110G126 $ 340 140.14mm 110.20mm 126.0mm

5.79kg

B125-110-45 B125-110-54 B125-110G90 B125G110G90 B125G110X90

1.17kg

707-76-11040 WA450,470-Bush-B C614 40 Pack; 4pa KNIVES 207-70-12161 PC600-I PC300-Bush-F BYellow 17 Ultra 7pa Grip 59 2.10kg 3055478 Hitachi EX350-Bush-A DTL6-115Y 9 0pa 2.23kg 421-70-11261 WA450,470-Bush-A C 10 8pa 45 2.40kg VOE1451 5557 Volvo EC460-Bush-HR C 1 New 2.10kg

Hitachi EX350-Bush-F C 14 5pa 69 PC400-Bush-C,D,E, PC600-Bush-HR C 15 14pa 69 2.51kg 425-70-11820 WA480,500-Bush-K,L B 24 16pa 62 2.68kg 46600855 Hitachi ZX450 Heavy Duty N 1

2.50kg

Hitachi EX350-Dogbone C 5 VOE1451 5335 EC460-Bush-HL C 2 2.98kg PC300-Bush-A PC850-Bush-F PC600-Bush-HL B 15 3.26kg 425-70-11730 WA500-Bush-J B 6 3.38kg Tesk Extra external groove C 10 2.95kg

$ 68.00 / 6 9W Int

2x0F8, 3055478 10W Int.Only 2xBF8, 9w Ext K,S3r Sint.No Int. Groove Pg125 707-76-11130 2x8Ø ORIG:110.43 2x8Ø Holes

$ Reduced $ Plain Bush A 48 16pa 60 Inspec Inv6749 $166 / 12 VOE1457 1194 Volvo C 18 4pa 83 13wExt2x8Ø 14wInt2BF8 3.77kg $ Reduced $ Plain Bush C 42 1pa 66 Discontinu Inspec #6749 3.85kg 707-76-11050 WA420-Bush-D,E C 16 2pa 69 R125x10x2 12W Iint,Ext 4.56kg VOE1457 0425 EC700-Bush-H C 6 2pa 74 Type J in future 3.62kg

Heavy Wall

Greasable C 8

0pa

Suit 4.5 Inch Diameter Shaft CAT980C,F,G-Bush-A D 6 DISCOUNT 2pa 64 FOR QUANTITY CE$63.50 CAT950B,E,F-Bush-F D 1 1pa BUSHINGS 80 CE $80 CAT983,988B-Bush-K D 22 2pa 83

CE $120 Quantity Discounts Available only upon D11 Ripper D request 2 4pa 58 Expressways $50 provided all outstanding invoices Caterpillar C 5 14pa 58 11N Ripper Arm Wtrac $367 are settled within 7 Days B135G115X132 $ 250 135.23mm 115.39mm 131.8mm 3.9kg 209-72-53170 PC600,800-Bush-I,K C 15 10more 2114 as 115.47,17wide groove Discount6pa for 4 1or of wany line item $10 ea B135F115X150 $ 360 135.22mm 115.49mm 149.7mm 5.74kg Flange Bush PC650-6-Bush-J OF8x2 C 6 Discount0pa 220 209-70-52141 for 10 or more of any lineF189.7x8 item $14R130x15 ea B133G114G130 $ 120 B133G114G150 $ 120 B133G114G184 $ 150 B140-114-67 $ 98 B140-114-117 $ 160

5.255” 5.258” 5.255” 5.504” 5.506”

4.513” 4.515” 4.516” 4.518” 4.519”

5.12” 5.91” 7.22” 2.63” 4.62”

1V8240 5V1386 1V7001 9J1914 4T3845

Suit 120mm Diameter Shaft B130-120G145 $ 280 B135G120G95 $ 186 B135-120X100 $ 210 B135G120G105 $ 195 B135-120X112 $ 198

130.14mm 135.10mm 135.11mm 135.10mm 135.17mm

120.19mm 120.20mm 120.32mm 120.18mm 120.38mm

145.0mm 94.5mm 99.8mm 104.5mm 112.0mm

3 . 45kg

B135G120X112 $ 220 B135G120X120 $ 250 B135-120X130 $ 310 B135G120X130 $ 310

135.17mm 135.15mm 135.15mm 135.15mm

120.38mm 120.24mm 120.36mm 120.36mm

112.0mm 120.0mm 129.7mm 129.7mm

2 . 60kg

Volvo 707-76-12030 2 . 35kg 707-76-12041 2 . 40kg 707-76-12130 2 . 60kg 208-70-61521 2 . 30kg

209-72-53170 Suits Komatsu BR 380 Jaw Crusher

Discount for 20 or more of any line item $20 ea

L180 C 7 6pa 86 WA450,470-Bush-E C 19 12pa 64 WA500-Bush-B,C C 5 5pa 74 WA450,470-Bush-D C 5 5pa 65 PC400-Bush-F C 4 9pa 92

2 Required

WallaceQ $86 10W Ext,Int2x8Ø

BF8 425-70-11871,8W INT, 10W Ext,Int2x8Ø

OF8, 51420,1124

BushesBF8 Tesk 2006 Greasable Bush C 13Pins 4pa and 92 707-76-12140 WA480,500-Bush-D,E C 22 Shims 3pa 93 and Seals 04/14 K$435 2 . 98kg EC700Bush-J OF8 WA500-6-ABC BF8 C 4 3pa 90 and425-70-11891

Tools Cutters425-70-31870 2 . 98kg Volvo EC700-Bush-K C 0pa 90 5 Missing 2 . 80kg

B135G120X155 $ 360 135.15mm 120.36mm 154.8mm 3. 65kg B135G120X160 $ 274 135.20mm 120.37mm 159.8mm 3. 77kg B135G120G175 $ 316 135.15mm 120.24mm 175.0mm 4. 20kg B133-121H57 $ 98 5.255” 4.750” 2.23” B133-121-64 $ 140 5.255” 4.749” 2.50”

Minimum Product Order $150

425-70-31830 WA500-6-Bush-J C Prices 5 6pa 120to change without 11 notice Missing subject 208-70-51410 PC400-Bush-A C 13 4pa 126 208-70-31220 $K940 424-70-11860 WA380,420-Bush-F C 14 2pa 115 04/14 14NExt A2U913-194034 Eimco Unhardened D 14 0pa 22 Step 13.33x4 D10.3C27 935-2939313 Eimco Z 1 0pa Step133.3x3

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 32 September 2015

Bushings - Hardened Steel - Precision Ground Suit 125mm to 200mm Diameter Shaft Stock, Usage, Mfr, 26-02-14 $

KSet Part No.

Price EX GST

Outside

B140-125-90 $ 186 140.17mm B140-125X95 $ 198 140.13mm B140-125X130 $ 280 140.15mm B140-125X196 $ 340 140.15mm B145F125X93 $ 280 145.20mm B150-125N150 $ 380 150.10mm

Inside 125.32mm 125.38mm 125.42mm 125.45mm 125.5 mm 125.22mm

Length

Manufacture Notes

Locations 18-08-2015

9,860

$ 12,108

89.6mm 2.25kg 421-70-11272, 11872 WA470-Bush-F C 12 10pa 71 421-70-11872 94.8mm 2.35kg 426-70-11871 WA600-Bush-C D 16 0pa 65 was 125.47 129.7mm 3.27kg 425-70-31840 WA500-6-Bush-D,E C 8 2pa 93 196.5mm 4.80kg 426-70-11710 WA600-3-Bush-J C 12 4pa 170 BF8 8W INT 92.6mm Flange Bush WA600-1-Bush-J D 0pa BF8 F159.9x35 Pg73 150.0mm Eimco A2U220-194399 C 18 8pa 159 2-Stt helic grves 30pitch 6.5w x2.8

Suit 5 Inch Diameter Shaft B139G127-127 $ 310 B139-127G152 $ 200 B146G127G105 $ 120 B146G127G132 $ 140 B146-127-140 $ 190 B146G127G140 $ 150

5.510” 5.505” 5.755” 5.755” 5.753” 5.756”

5.011” 5.010” 5.013” 5.014” 5.009” 5.014”

4.98” Joy External Groove C 5 6.00” 4.12kg Caterpillar Internal Groove D 3 4.13” 1V9143 CAT980C,F,G-Bush-F D 5 5.19” 1V5635 CAT983,992C-Bush-J C 17 5.50” 7K8115 CAT983 D 5.51” 4V8519 CAT966-Bush-F C 2

0pa 103 Austral Hyd 0pa Cutting Edges Ph 4954 5522 4pa CE$70Expressways$70 2pa 69 1 CE $69.104.22kg 0pa 4.13kg 0pa 84 CE$84, 10w Ext,4x6 4.38kg

Suit 130mm Diameter Shaft B140-130G162 $ 340 140.15mm B145G130X130 $ 390 145.10mm B150G130X145 $ 410 150.15mm B150-130-74 $ 210 150.17mm B150-130-89 $ 240 150.17mm

130.26mm 130.25mm 130.22mm 130.27mm 130.27mm

162.0mm 2.67kg Volvo 129.8mm 3.20kg EX3500 145.0mm 4.83kg Volvo 74.0mm 2.60kg Tesk 2013 89.0mm 3.12kg Tesk 2013

B160-130-75 $ 190 160.18mm B160-130-90 $ 220 160.18mm B160-130-120 $ 290 160.18mm B160G130X180 $ 460 160.18mm B165F130X149 $ 670 165.20mm

130.28mm 130.28mm 130.28mm 130.28mm 130.42mm

75.0mm 90.0mm 120.0mm 180.0mm 149.0mm

4.00kg

Tesk 2013 Tesk 2013 6.40kg Tesk 2010 9.39kg Tesk 2010 9.70kg Flange Bush 4.80kg

L180 2 Required D 2pa 4 / 6 lost, Discontinue Greasable A 47 25pa 140 Bf8 15wExt EC700-Bush-H C 31 15pa 155 (+/-) EX800-5-BUSH-HL Plain Bush D 8 0pa 86 DJ Ruskin request for Hitachi Plain Bush D 4 3pa 95 DJ Ruskin request for Hitachi Plain Bush D 5 Plain Bush C 2 Plain Bush C 5 Greasable Bush D 11 PC800-6-Bush-J C 2

0pa 80 4pa 94 4pa 125 0pa 204 Bfig8 2pa 2 OF8 209-944-5230 F204.8 N8 R150x15

Suit 140mm Diameter Shaft B155-140G135 $ 290 155.20mm B155G140G135 $ 320 155.20mm B155G140X135 $ 350 155.20mm B155G140G148 $ 320 155.11mm B155G140X196 $ 480 155.15mm B155G140X215 $ 540 155.15mm

140.47mm 140.47mm 140.33mm 140.50mm 140.45mm 140.35mm

135.0mm 3.55kg 426-70-11890 135.0mm 3.55kg 426-70-11820 135.0mm Tesk 2009 148.4mm 3.9kg 426-70-31770 196.5mm 426-70-11720 215.0mm 5.16kg 425-70-11861

WA600-Bush-A,B,D,E D WA600-Bush-L D Type J Greasable C 6 WA600-6-Bush-B,C D WA600-3-Bush-K D WA500-Bush-F C

0pa 3pa 146 K$509 6pa 165 DJM 0pa 220 UKW 10w Int+5each side 3pa 150 2BF8 12W Ext,IntK$661 4pa 240

B160F140X93 $ 390 160.26mm 140.50mm 92.5mm Flange Bush WA600-1-Bush-K Z D 0pa F 175x38 F8 426-70-11942 Pg73 B160G140X163 $ 398 160.20mm 140.50mm 163.0mm 21N-70-12170 PC1250-Bush-K D 0 2pa B160F140X190 POA 160.34mm 140.50mm 190.0mm F230x8 Flange Bush PC1250-7-Bush-J D 2 0pa 21N-70-32150 F230x8.2 R160x15

Check Serial No. break B175F140X193 POA 175.20mm 140.52mm 193.0mm 13kg Flange Bush PC1250-8-Bush-J D 2 0pa 21N-70-32550 4start helical grooves B171-152-59 $ 290 6.7545” 6.009” 2.32” 2.31kg 0501-10096 Plain Bush C 10 4pa 104 Juganaut - UGM B178G152G50 $ 200 7.007” 6.004” 2.00” Type I Greasable Z 1 0pa See Page 37 for Bronze Bushes

Suit 160mm Diameter Shaft B180-160-95 $ 275 180.15mm 160.42mm 94.6mm B180-160G140 $ 440 180.29mm 160.42mm 140.2mm B180G160X146 $ 450 180.13mm 160.55mm 145.6mm B180G160G159 $ 480 180.13mm B180F160-177 $ 560 180.34mm B180-160G188 $ 590 180.13mm B185G160X150 $ 520 185.25mm B203-178G187 $ 350 8.002” B220-200-118 $ 280 220.mm

3.99kg 425-70-31820 5.87kg

426-70-11860 kg 21N-70-11181

WA500-6-Bush-F D 2pa WA600-Bush-F C 6 5pa 225 PC1250-Bush-F C 2

10x1.5 V grooves 10W INT K$738 22wExt8wInt

159.4mm kg 21N-70-31160 PC1250-Bush-A C 2 Bushes

and Pins 19wExt7wInt 176.9mm 7.4kg 21N-70-31181 PC1250-Bush-F-Boom D 2 Seals 0pa 394 and Shims UKW 188.3mm 7.9kg 426-70-31791 WA600-6-Bush-A D 2pa 450 and UKW 10W Int + 7 each side Cutters Tools 150.0mm 9.92kg Type J Greasable D2 0pa Minimum Product Order $150 Prices 0pa subject to change without notice 7.006” 7.36” Type U Internal Groove Z 1

CHECK DIAMETERS! 200.*mm 118.0mm Type A Plain Bush Z 1 0pa SUMMS

160.55mm 160.50mm 160.42mm 160.40mm

Dimensions shown are for the KSet Bush, not for nearby OEM numbers

KSet Engineers design bushes to suit market requirements PRICES DO NOT INCLUDE GST SUBJECT TO CHANGE Example: A neaterNOTICE fit to shafts and pins.

PRICES ARE WITHOUT

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 33 September 2015

Pin Wipers - Dust Seals for Excavators & Loaders Part Number

Price Outside Inside

Ex GST

$ 12

SL50-40-04 SL55-40-04

$ 10 50 mm $ 14 55 mm

40 mm 40 mm

4 mm .02 kg 4 mm .02 kg

SL55-45-04

$ 13 55 mm

45 mm

4 mm .02 kg

SL60-50-04 SL65-50-04 SL65-50-05 SL65-50-06

$ 18 $ 12 $ 13 $ 18

60 mm 65 mm 65 mm 65 mm

50 mm 50 mm 50 mm 50 mm

4 mm 4 mm 5 mm 6 mm

SL64-51-06

$ 15

2.5”

2”

0.25” .02 kg

KSet Seal

SL68-55-04

$ 12 68 mm

55 mm

4 mm .02 kg

For Komatsu

SL70-60-04 SL75-60-04 SL75-60-05 SL75-60-08

$ 13 $ 18 $ 20 $ 20

70 mm 75 mm 75 mm 75 mm

60 mm 60 mm 60 mm 60 mm

4 mm 4 mm 5 mm 8 mm

SL76-64-05 SL76-64-08

$ 20 $ 14

3” 3”

2 1/2” 2 1/2”

3/16” .03 kg Caterpillar Grease Seal 10 8 6 Seals for Caterpillar 5/16” .05 kg CAT950H Wheel Loader 7K9205 0 0 5 CAT950H-Seal-J

SL80-65-04 SL80-65-05 SL80-65-08

$ 18 80 mm $ 18 80 mm $ 20 80 mm

65 mm 65 mm 65 mm

4 mm .03 kg For Komatsu 07145-00065 43 40 10 Seals - Emerald 5 mm .03 kg For Kobelco 2445R220D2 9 10 6 Kobelco Dust Seals 8 mm .05 kg 417-09-11120 707-77-65110 16 30 7 WA200-5-Seal-BCJKL

SL80-70-04 SL82-70-08 SL82-70-10

$ 15 80 mm $ 18 3 1/4” $ 18 3 1/4”

70 mm 2 3/4” 2 3/4”

4 mm .02 kg 5/16” .04 kg 3/8” .04 kg

SL85-70-04 SL85-70-05 SL85-70-08

$ 20 85 mm $ 16 85 mm $ 20 85 mm

70 mm 70 mm 70 mm

4 mm .03 kg 2445R138D6 07145-00070 28 28 6 Urethane Seals 5 mm .03 kg Kobelco 2445R220D3 12 18 6 Hitachi - 4084578 8 mm .05 kg Komatsu 21K-70-12180 44 36 7 Pin Wiper for Komatsu

SL90-70-05

$ 22 90 mm

70 mm

5 mm .08 kg

Metric

SL90-75-08

$ 20 90 mm

75 mm

8 mm .08 kg

Komatsu

SL89-76-05 SL89-76-08 SL95-76-08

$ 16 3 1/2” $ 10 3 1/2” $ 20 3 3/4”

3” 3” 3”

0.25” .02 kg For Caterpillar

.02 kg .02 kg .02 kg .03 kg

.02 kg .03 kg .03 kg .04 kg

80 mm

4.5 mm .04 kg

95 mm 95 mm 95 mm 95 mm 95 mm

80 mm 80 mm 80 mm 80 mm 80 mm

4 mm 5 mm 6 mm 8 mm 10 mm

80 mm 80 mm

10 mm .08 kg 10 mm .10 kg

SL100-80-10 $ 32 100 mm SL110-80-10 $ 32 110 mm

12

8

7K9201

22 0 6

Oil Seals Metric

Kubota Seals KSet Seal

24 64 4 0 4 4

Komatsu

07145-00045 108 168 5 Komatsu Dust Seals

For Komatsu For Kobelco For Kobelco Sub for

07145-00050 26 107 8 Seals, Earthmoving 2445R138D1 8 22 4 2445R220D5 26 4 5 130-09-12931 14 10 6 Imperial

18 12 6

416-09-11130 30 0 5

KSet Seal Dust Seal 2445R138D3 07145-00060 For Kobelco 2445R220D1 For Komatsu 203-70-33210

Metric Imperial Imperial

KSet Seal KSet Seal KSet Seal

KSet Seal

Dust Seal

18 14 30 48

4 60 0 18

Excavator Seals

5 Plant Machiney Seals 7 Komatsu Dust Seals 13 Kobelco Dust Seals 8 Hydraulic Cylinder

6 16 6 Dust Seals Mackay 0 8 9 Case Wheel Loaders 0 4 9 Gippsland Dust Seals

10 18 14

Excavator Seals

419-09-11110 36 18 8

Excavator Seals

3/16” .08 kg Imperial KSet Seal 0 4 8 Dust Seals Perth 5/16” .08 kg CAT950H Wheel Loader 7K9209 0 0 4 CAT950H-Seal-C 5/16” .08 kg Caterpillar Grease Seal 30 8 6 Imperial Pin Wipers

SL90-80-4.5 $ 20 90 mm $ 15 $ 18 $ 20 $ 18 $ 24

Kubota Seals

$ 3,862

SL51-38-06

SL95-80-04 SL95-80-05 SL95-80-06 SL95-80-08 SL95-80-10

Oil Seals

22-06-2015

Stock, Usage, Mfr 30-06-14 $ 7,939

$ 14 45 mm

1.5”

4 mm .02 kg

Manufacturer’s Notes

SL45-35-04

2”

35 mm

Width

.04 kg .04 kg .05 kg .06 kg .07 kg

Metric

KSet Seal

2445R138D7 Kobelco Perth Seals Komatsu Komatsu

07145-00080 2445R220D4 Overnight 205-70-62140 205-70-62150

Metric Metric

KSet Seal KSet Seal

6 0 10 67 123 4 38 38 16 72 134 48 50

New Part

6 Dust Seals, Komatsu 6 Hitachi - 4067902 7 Dust Seals Pilbara 4 Wiper Seals Komatsu 8 PC220 Wiper Seals

10 0 25 10 2 14

Dust Seals, Pin Wipers, Urethane Seals MetalDOCased Seals, Continued next page....

PRICES NOT INCLUDE GST PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 34 September 2015

Pin Wipers - Dust Seals for Excavators & Loaders Part Number

Price Outside Inside

Width

Manufacturer’s Notes

Ex GST

$ 4,797

3 1/4”

5/16” .08 kg CAT950H Wheel Loader 7K9210 0 0 3

SL95-85-05 $ 32 95 mm SL100-85-08 $ 23 100 mm

85 mm 85 mm

05 mm .04 kg 8 mm .06 kg

SL102-89-08 $ 9 4” SL104-89-08 $ 12 4 1/4” SL114-89-08 $ 20 4 1/2”

3 1/2” 3 1/2” 3 1/2”

5/16” .07 kg Caterpillar D10 7K9211 24 1 5 Ripper Cylinder Seals 5/16” .08 kg CAT950H Wheel Loader 7K9212 0 0 5 CAT950H-Seal-A 5/16” .08 kg Caterpillar Dust Seal 30 0 ?

Excavator Seals

105 mm 105 mm 105 mm 105 mm 105 mm

90 mm 90 mm 90 mm 90 mm 90 mm

4 mm 5 mm 6 mm 8 mm 11 mm

SL110-90-08 $ 45 105 mm

90 mm

11 mm .07 kg

Imperial

SL110-95-05 $ 32 110 mm SL110-95-08 $ 23 110 mm

95 mm 95 mm

5 mm .06 kg 8 mm .06 kg

Sub for Komatsu

SL115-100-04 $ 25 SL115-100-07 $ 38 SL115-100-08 $ 22 SL115-100-10 $ 48 SL120-100-08 $ 46

115 mm 115 mm 115 mm 115 mm 120mm

100 mm 100 mm 100 mm 100 mm 100 mm

4 mm 7 mm 8 mm 10 mm 8 mm

SL127-102-08 $ 14

5”

4”

SL125-110-04 $ 30 SL125-110-08 $ 24 SL130-110-08 $ 54 SL130-110-10 $ 54 SL135-110-08 $ 38

125 mm 125 mm 130 mm 130 mm 135 mm

110 mm 110 mm 110 mm 110 mm 110 mm

4 mm 4 mm 8mm 10mm 8 mm

SL133-114-08 $ 16

5 1/4”

4 1/2 ”

5/16” .08 kg CAT950H Wheel Loader 7K9218 0 0 4

SL135-120-04 $ 30 135 mm SL135-120-08 $ 30 135 mm SL140-120-08 $ 30 140 mm

120 mm 120 mm 120 mm

4 mm .06 kg Komatsu 07145-00120 16 14 11 PC400 Dust Seals 8 mm .09 kg Komatsu 421-09-11350 70 52 10 WA470 Dust Seals 8 mm .09 kg Double Lip Seal VOE14560214 20 0 10 Volvo EC700 Seals

SL140-125-08 $ 46 140 mm SL146-127-08 $ 16 5 3/4” SL155-130-08 $ 36 155 mm

125 mm 5” 130 mm

8 mm .09 kg Komatsu 421-09-11330 12 14 42 WA470 Dust Seals 5/16” .08 kg Caterpillar 5P0068

8 mm .09 kg Double Lip Seal V0E14560217 6 2 19 Volvo EC700 Seals

SL155-140-08 $ 42 155 mm

140 mm

8 mm

SL160-145-06 $ 60 160 mm SL160-145-08 $ 80 160 mm

145 mm 145 mm

6 mm Oil Seal 8 mm .1 kg

SL95-83-08 $ 9

SL105-90-04 SL105-90-05 SL105-90-06 SL105-90-08 SL105-90-11

$ 20 $ 30 $ 24 $ 21 $ 36

3 3/4”

22-06-2015

Stock, Usage, Mfr 30-06-14 $ 7,939

Metric Komatsu

CAT950H-Seal-K,L

KSet Seal 10 2 14 424-09-12320 36 32 8 WA420 Dust Seals

.04 kg 2445R138D8 07145-00090 54 .04 kg 2438U1381524 KHV0103 22 .04 kg 2445R220D6 LE00951,4067901 34 .06 kg 205-70-62180 207-70-72120 84 .07 kg Sub for 207-70-12270 28

KSet Seal

40 6 Kobelco Pin Wiper 6 16 Sumitomo Wiper Seals 30 8 Hitachi Dust Seals 42 7 Wiper Seals Komatsu 16 10 PC300-7 Dust Seal

4 2 28

KHV0104 30 12 15 Dust Seal Sumitomo 421-09-11310 48 48 9 Seals Darwin Overnight

.04 kg Komatsu 07145-00100 36 46 10 Northern Territory .07 kg Hitachi ZX450 4074008 1 0 33 Hitachi Excavator Seals .07 kg Komatsu 208-70-12231 122 28 9 .09 kg Komatsu 205-70-62160 10 8 22 .10 kg Metric KSet Seal 4 New 28

5/16” .09 kg

Caterpillar

3E6758

8 0 ? Caterpillar Wheel Loader

.05 kg Komatsu 07145-00110 34 32 12 .05 kg Komatsu 421-09-11320 120 68 7 WA420 Dust Seals .08 kg Pin Wiper Concrete Crusher 4 6 33 .10 kg 4083972 Hitachi 4251212 0 2 37 Hitachi ZX450 .10 kg Double Lip Seal VOE14560213 20 0 16 Volvo EC700 Seals

.1 kg

CAT950H-Seal-F

Komatsu

425-09-11110 14 8 17 Wiper Seal Komatsu

Komatsu Komatsu

425-09-11210 425-09-11180

4 0 40 WA480 Dust Seals 4 0 55 WA500 Dust Seals

Dust Seals, Pin Wipers, Urethane Seals Metal Cased Seals, Buy-by-Size Seals PRICES DO NOT INCLUDE GST PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 35 September 2015

Shim Kits - Spacers

Laser Cut Steel Profiles - Thrust Washers - Excavator Shims

10-08-2015

PART No. PRICE

OUTSIDE INSIDE THICKNESS MANUFACTURER’S NOTES

Ex GST

SM31 $ 18 SM36 $ 20 SM40.5 $ 14/pr

60 mm 70 mm 80 mm

31.0 mm 36.0 mm 40.5 mm

1mm, 2mm, 3mm 1mm, 2mm, 3mm 6mm

2 of each per Kit 2 of each per Kit 2 per pack

B 24 27 pa 3 Frequently Asked3 Questions: B 18 17 pa Australia can I buy CWhere 11 in 0 items once off Dust Seals / Pin Wipers ?

B 13 p a ! 4 Pty Ltd KSet40 Engineering Z 550

1 Bore 38.5 forSeals U11649 Steel Cased pa Polyurethane Z 190 2 pa available EX STOCK. Z 230 5 pa Overnight Australia-Wide Delivery !

A 37 60 pa 4 A 31 53 pa 7 C 15 3 pa 13 B 19 48 p a ! 8

SM41 SM37 SM44 SM45

$ 21 $ 18 $ 18 $ 18

80 mm 63 mm 70 mm 70 mm

41.0 mm 37.5 mm 44.5 mm 45.2 mm

1mm, 2mm, 3mm 3mm 3mm 2mm

2 of each per Kit 10 per Pack 10 per Pack 10 per Pack

SM46 SM51 SM52 SM61

$ 24 $ 28 $ 36 $ 29

80 mm 100 mm 127 mm 110 mm

46.0 mm 51.0 mm 51.0 mm 61.0mm

1mm, 2mm, 3mm 1mm, 2mm, 3mm 1mm, 2mm, 3mm 1mm, 2mm, 3mm

2 of each per Kit 2 of each per Kit 2 of each per Kit 2 of each per Kit

SM64 SM65

$ 34 $ 30

101 mm 114 mm

63.5 mm 65.0 mm

SM66 SM71

$ 28 $ 31

115 mm 130 mm

66.0 mm 71.0 mm

SM76

$ 34

113 mm

78.0 mm

SM77 SM81 SM86 SM91

$ 34 $ 35 $ 38 $ 38

127 mm 130 mm 150 mm 150 mm

77.0 mm 81.0 mm 86.0 mm 91.0 mm

1mm, 2mm, 3mm 1mm, 2mm, 3mm 1mm, 2mm, 3mm 1mm, 2mm, 3mm

2 of each per Kit 2 of each per Kit 2 of each per Kit 2 of each per Kit

C 24 14 pa A 11 93 pa!

C 2 4 p a !

A 30 106 p a !

SM101 SM111 SM121 SM122

$ 44 $ 48 $ 58 $ 60

150 mm 160 mm 170 mm 185 mm

101.0 mm 111.0 mm 121.0 mm 121.0 mm

1mm, 2mm, 3mm 1mm, 2mm, 3mm 1mm, 2mm, 3mm 1mm, 2mm, 3mm

2 of each per Kit 2 of each per Kit 2 of each per Kit 2 of each per Kit

A 17 26 pa 14 C 4 18 pa 15 C 13 12 pa 17 D 18 2 pa 21

SM131 SM141 SM167

$ 80 $ 120 $ 140

220 mm 280 mm 300 mm

131.0 mm 1mm, 2mm, 3mm 141.0 mm 1mm, 2mm, 3mm 167.0 mm 1mm, 2mm, 3mm

2 of each per Kit 2 of each per Kit 2 of each per Kit

D 10 D 10 D 2

10mm 5mm 1mm, 2mm, 3mm 1mm, 2mm, 3mm 6mm

$ 3,170

Stock, Usage, Mfr 30-06-14 $ 1,908

Single Thrust Washer Single Thrust Washer

Z 7 T79849 John Deere Z T67205 John Deere

2 of each per Kit 2 of each per Kit

B 31 49 pa 8 A 31 40 pa 11

Single Thrust Washer

Z ? T43810 Int Cfr 2.5x45o 10 11 8 14

4 pa 25 8 pa 40 2 pa 43

Shims and Spacers for PC200 - PC220 - PC300 - PC350 - PC400 - Overnight Delivery to Emerald - Mackay - Cairns Spacer Washers for Excavators - Shims for Wheel Loaders - Earthmovers’ Shim Kits - Overnight to Darwin Shims for Komatsu Excavators - Shim Washers for Kobelco Excavators - Overnight Delivery to Perth Shims and Spacers for Line-Borers - Shim Washers for Komatsu and Kobelco Mini Excavators Bucket Repair Shim Washers - Caterpillar Repair Shim Washers

Pins and Bushes

Shims and Seals Tools and Cutters

Minimum Product Order $150 Prices subject to change without notice PRICES DO NOT INCLUDE GST PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE

KSet Engineering Pty Ltd 34 Glenwood Drive Thornton NSW 2322 Phone 02 4928 5700 Fax: 02 4928 5757 Email: sales@kset.com.au

$150 Min Order Newcastle - Sydney RegionOffice - AustraliaCopy

Page 36 September 2015