WAFER AUTOMATED SYSTEMS HELP THE SEMICONDUCTOR MANUFACTURING INDUSTRY The most powerful automatic motion controller products that can attain the advantages of the Robots
Kensington Laboratories depict to be the full-service integrator in the semiconductor industry. We have our space in automating the semiconductor manufacturing process with the help of the wafer front end and the stage repair systems SOME OF THE BASIC GUIDELINES TO CRAFT THE CLEAN DRIVE TRAINS: The number of moving parts is below the substrate. Low in a number of moving parts. Eradicating the generated particles. Choosing the abrasion-resistant and wear-resistant materials. Make use of a suitable belt/pulley alignment and belt tension, mainly for the belts and pulley drives. Acknowledging the direct-drive joints to further stop the process of contaminating. Implementing the non-volatile lubricants and walk upon the stubborn procedures. The vacuum robots in the semiconductor manufacturing process partially present in the vacuum. The robot arm is in the void while the robot base dwells in the emerging atmosphere.
www.kensingtonlabs.com