27-EA52
EARTH AUGER Petrol-driven earth auger for efficient drilling for poles, plinths and plants, etc. Price includes 1 drill. Choose from the following drill diameters: 60 mm, 80 mm, 100 mm, 200 mm or 300 mm!
27-PD83
POST DRIVER
The post driver’s own weight of 18.4 kg plus the power from the 4-stroke engine make it easy to knock posts gently into the ground. Easy to start and simple to operate.
Drill diameter 60-300 mm Drill length 800 mm Motor size 52 cc Output 2.2 kW Fuel tank 1200 ml Weight 12 kg
LOOSE DRILLS
83 mm collar protects the top of the post as it is driven in. The vibration-resistant handles ensure a good working environment.
R27-EA52.010 R27-EA52.001 R27-EA52.002 R27-EA52.003 R27-EA52.004 R27-EA52.005
Diameter Max 83 mm Capacity Striking power 34 joule, 1720 strikes/minute Motor 4-stroke 36 cc, 1.3 hp Weight 18.4 kg
60 mm drill 80 mm drill 100 mm drill 200 mm drill 300 mm drill 200 mm ice drill
35-HRT160
HEDGE TRIMMER FOR THREE-POINT LINKAGE The hedge trimmer is supplied complete with tank, pump and valve block package, plus lever kit with Teleflex wire for controlling the hedge trimmer from inside the cab. Thanks to the hedge trimmer’s smart design and ergonomics, it can trim on both sides of the tractor. If you use it on the tractor’s three-point linkage, it has a full movement pattern on the tractor’s right-hand side, but more limited movement on the tractor’s left-hand side. The hedge trimmer can also trim below ground level, which means it works well in ditches and under your electric fence. Thanks to the design of the trimmer, a simple tractor with 25-40 hp is sufficient. Working width 160 cm Reach: height 550 cm, horizontal 480 cm L x W x H: 440 x 1300 x 2540 mm Oil tank 20 l Weight 223 kg
27-HTFL
HEDGE TRIMMER FOR FRONTLOADERS The hedge trimmer has hydraulic angling of the arm and cuts branches up to 3.5 cm. All blades are fitted with bolts, which makes it easy to replace them. Mounting requires a double-acting hydraulic outlet for 12 V electric valve, for the cylinder and for the cutting bar (hydraulic motor). Supplied with hydraulic hoses with ½” male quick coupling and attachment suitable for Euro or Trima. Working width 1400 mm Cut 35 mm Oil quantity 15 l/min L x W x H: 3079 x 706 x 545 mm Hydraulic cylinder 40/20-200 Weight 119 kg
GROUNDS AND PARKS 83