GRASSLAND HARROW Increased pasture productivity!
The reversible harrow mat enables both careful and aggressive cultivation of the substrate. The triangles (rippers) are manufactured from durable cast iron and the frame and 3-point linkage have a powerful design to withstand the strain from the substrate. The grass harrow is equipped with 4 triangle rows (BH200 is equipped with 3 rows) for maximum results for loosening up/aeration of fields and levelling of molehills, animal droppings, etc. The grassland harrow is suitable for levelling pastures, paddocks, etc. The largest models fold up hydraulically and the hydraulic cylinders are included as standard. PRODUCT NO. Width Weight Sections Hydraulics
36-BH200 2.0 m 147 kg 1 –
36-BH400 4.0 m 310 kg 3 –
36- BH500 5.0 m 473 kg 3 Standard
36-BH600 6.0 m 570 kg 3 Standard
Parts subject to wear: R36-BH200.002 Ring R36-BH400.001 Triangular skids
ROTARY CULTIVATORS Kellfri’s Rotary Cultivator is a perfect soil cultivator for agricultural tractors, designed for eradicating weeds, stubble cultivation, sowing seeds, mixing manure, levelling grassland and other types of soil preparation. A machine with gears, kick-back guard and sturdy attachment of blades designed for safe operation. The working depth of the machine is adjusted by means of the side skids. Supplied with PTO drive shaft with shear bolt as standard.
Parts subject to wear: R31-TL135.001 Cultivator blade, right R31-TL135.002 Cultivator blade, left R31-TL180.001 Blade, right, for TL180/TL210. L model M12
PRODUCT NO.
31-TL135
31-TL180
LxWxH
1550 x 800 x 700 mm
2000 x 800 x 700 mm 2260 x 847 x 1062 mm
Weight
170 kg
300 kg
480 kg
Working width
1345 mm
1795 mm
2100 mm
Blades
28
42
50
Wheel drive
Gears in oil bath
Gears in oil bath
Gears in oil bath
Power requirement
25 - 40 hp
40 - 75 hp
45 - 80 hp
Capacity
0.2 - 0.3 ha/hour
0.22 - 0.32 ha/hour
0.4 ha/hour
Three-point linkage
Cat 1
Cat 2
Cat 2
Parts subject to wear: R31-TL180.002 Blade, left, for TL180/TL210. L model M12 R31-TL180.010 Cultivator blade, right, C model, 14 mm hole R31-TL180.011 Cultivator blade, left, C model, 14 mm hole
STONE SORTING FORK A solid and well-constructed stone sorting fork with a reinforced humped front. The hump prevents stones already collected from sliding off while you are collecting more stones. The tines and rods in the rear and bottom are 30 mm in diameter and the c/c distance is 115 mm. Supplied with boltable Euro/Trima attachments or three-point linkage cat. 2, which facilitates change to frontloader with another attachment, front linkage or lifting arms at the back of the tractor. PRODUCT NO. Width Weight Attachments that fit Depth Number of tines Tines Tine spacing
16-SGE/T155 1550 mm E: 357 kg T: 307 kg Trima or Euro 1000 mm 15 30 mm ø 115 mm
82 GROUNDS AND PARKS
16-SG1553P 1550 mm 325 kg Three-point, category 2 1000 mm 15 30 mm ø 115 mm
16-SGE/T200 2000 mm E: 396 kg T: 346 kg Trima or Euro 1000 mm 19 30 mm ø 115 mm
16-SG2003P 2000 mm 364 kg Three-point, category 2 1000 mm 19 30 mm ø 115 mm
31-TL210