Construction Documents

KATIE GUILLEN INTERIOR DESIGN

GENERAL PROJECT NOTES

PROJECT DATA

VIRGINIA TECH

COLLEGE OF ARCHITECTURE + DESIGN

222 BURRUSS HALL, BLACKSBURG, VA 24060

1. THE GENERAL CONTRACT DOCUMENTS ARE THE INSTRUMENTS OF SERVICE AND SHALL REMAIN THE PROPERTY OF THE DESIGNER WHETHER THE PROJECT FOR WHICH THEY ARE PREPARED IS EXECUTED OR NOT. 2.

"INSTALL" MEANS SUPPLIED BY OTHERS, TO BE INSTALLED BY CONTRACTOR.

3.

"PROVIDE MEANS FURNISH AND INSTALL COMPLETE AND IN PLACE.

4.

"TYPICAL" MEANS IDENTICAL FOR CONDITIONS NOTED.

PROJECT DESCRIPTION: THIS PROJECT IS A PARTIAL RENOVATION OF THE SECOND FLOOR AT THE NORTH SIDE OF BURRUSS HALL. THERE IS NO CHANGE OF USE, INCREASE IN AREA, OR ACTIVITY FUNCTIONS. APPLICABLE CODES AND REFERENCE STANDARDS: INTERNATIONAL BUILDING CODE (IBC 2012 EDITION) NATIONAL ELECTRIC CODE (NEC) AMERICANS WITH DISABILITIES ACT (ADA)

BURRUSS OPEN OFFICE

5. DO NOT SCALE DRAWINGS, DIMENSIONS GOVERN. VERIFY DIMENSIONS WITH FIELD DIMENSIONS, IF DISCREPANCIES ARE DISCOVERED BETWEEN INDIVIDUAL DRAWINGS, CONTACT THE DESIGNER FOR RESOLUTION BEFORE PROCEEDING.

USE GROUP CLASSIFICATION (EXISTING SPACE): E (EDUCATION) A (ASSEMBLY)

6. HORIZONTAL DIMENSIONS INDICATED ARE TO/FROM FINISHED FACE OF CONSTRUCTION EXPECT WHEN NOTED AS CENTERLINE (CL), DIMENSIONS ARE TO CENTERLINE OF FRAMING.

USE GROUP CLASSIFICATION (PROPOSED SPACE): A (ASSEMBLY) *NOTE: THERE IS NO CHANGE OF USE

7. VERTICAL DIMENSIONS ARE FROM TOP OF FLOOR SLAB, EXPECT WHERE NOTED TO BE FROM ABOVE FINISHED FLOOR (A.F.F.).

CONSTRUCTION TYPE: 24 NON-COMBUSTIBLE, PROJECTED

8. CUT AND FIT COMPONENTS FOR ALTERATION OF EXISTING WORK AND INSTALLATION OF NEW YORK. PATCH DISTURBED AREAS TO MATCH ADJACENT MATERIALS AND FINISHES.

OCCUPANT LOADS: EDUCATION AREAS CALCULATED AT ASSEMBLY AREAS CALCULATED AT

20 SQ.FT. PER OCCUPANT 15 SQ.FT. PER OCCUPANT

9. PATCH AND REPAIR ALL FIREPROOFING DAMAGED OR REMOVED DURING PERFORMANCE OF THE WORK. FIREPROOF NEW PENETRATIONS REQUIRED BY THE WORK AND EXISTING PENETRATIONS IN EXPOSED PLENUM AREAS.

OCCUPANT LOAD: PROPOSED SPACE, SECOND FLOOR

CODE: 482

PROJECT SQUARE FOOTAGE: PROPOSED SPACE, SECOND FLOOR

9550 NET SQFT.

10. CONTRACTOR AND SUBCONTRACTORS SHALL COORDINATE THE LAYOUT AND EXACT LOCATIONS OF ALL PARTITIONS, DOORS, ELECTRICAL/TELEPHONE OUTLETS AND LIGHT SWATCHES WITH DESIGNER BEFORE PROCEEDING WITH CONSTRUCTION.

VIRGINIA TECH

ACTUAL: 130

11. CONTRACTOR SHALL PROVIDE MANUFACTURER'S SPECIFICATIONS, INSTALLATION INSTRUCTIONS, SHOP DRAWINGS AND SAMPLES FOR REVIEW AND APPROVAL OF ALL MATERIALS AND METHODS TO BE USED PRIOR TO ORDERING OR PROCEEDING WITH THE WORK. ISSUED FOR:

12. CONTRACTOR TO FOLLOW MANUFACTURER'S RECOMMEND SPECIFICATIONS AND INSTALLATION PROCEDURES. IF THESE ARE CONTRARY TO THE CONTRACT DOCUMENTS, CONTRACTOR SHALL NOTIFY THE DESIGNER, IN WRITING IMMEDIATELY, TO RESOLVE DISCREPANCIES PRIOR TO PROCEEDING. 13. CONTRACTOR SHALL ORDER AND SCHEDULE DELIVERY OF MATERIALS IN AMPLE TIME IN ORDER TO AVOID DELAYS IN CONSTRUCTION. IF AN ITEM IS FOUND TO BE UNAVAILABLE, CONTRACTOR SHALL NOTIFY DESIGNER IMMEDIATELY TO ALLOW DESIGNER A REASONABLE AMOUNT OF TIME TO SELECT A REASONABLE SUBSTITUTE. 14. THE FINISHED WORK SHALL BE FIRM, WELL ANCHORED, IN TRUE ALIGNMENT, PLUM, LEVEL, WITH SMOOTH, CLEAN, UNIFORM APPEARANCE WITHOUT WAVES, DISTORTIONS, HOLES, MARKS, CRACKS, STAINS, OR DISCOLORATION. JOINTING SHALL BE TIGHT FITTING, NEAT AND WELL SCRIBED. THE FINISH WORK SHALL NOT HAVE EXPOSED UNSIGHTLY ANCHORS OR FASTENERS AND SHALL NOT PRESENT HAZARDOUS, UNSAFE CORNERS. ALL WORK SHALL HAVE THE PROVISION FOR EXPANSION CONTRACTION, AND SHRINKAGE AS NECESSARY TO PREVENT CRACKS, BUCKLING AND WARPING DUE TO TEMPERATURE AND HUMIDITY CONDITIONS. 15.

CONTRACTOR SHALL COMPLY WITH ALL BASE BUILDING REQUIREMENTS AND DESIGN CRITERIA. 16. ALL WORK SHALL COMPLY WITH THE APPLICABLE CODES, AMENDMENTS, RULES, REGULATIONS, ORDINANCES, LAWS, ORDERS, APPROVALS, ETC., THAT ARE REQUIRED BY PUBLIC AUTHORITIES. IN THE EVENT OF CONFLICT, THE MOST STRINGENT REQUIREMENTS SHALL COMPLY. REQUIREMENTS INCLUDE, BUT ARE NOT LIMITED TO THE CURRENT APPLICABLE EDITION PUBLICATIONS OF THE FOLLOWING (OR OTHERWISE NOTED): A. INTERNATIONAL BUILDING CODE (IBC 2012 EDITION) B. NATIONAL FIRE PROTECTION ASSOCIATION (NFPA) C. NATIONAL ELECTRIC CODE (NEC) D. INTERNATIONAL PLUMBING CODE (IPC 2009 EDITION) E. INTERNATIONAL MECHANICAL CODE (IMC 2009 EDITION) F. AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI) G. AMERICANS WITH DISABILITIES ACT (ADA) H. LOCAL MUNICIPAL ORDINANCES AND AMENDMENTS TO THE CODES.

DATE:

SHEET INDEX SHEET # A100 A101 A102 A103 A104 A105 A106 A107 A108 A109 A110 A111 A112 A113 A114 A115

SHEET NAME COVER SHEET FIRE AND LIFE SAFETY PLAN EXISTING PLAN DEMOLITION PLAN PLAN ENLARGED PLAN INTERIOR SECTIONS WALL SECTIONS INTERIOR ELEVATIONS INTERIOR WALL DETAILS MILLWORK DETAILS FINISH PLAN FURNITURE PLAN POWER + DATA PLAN RCP ENLARGED RCP

Consultant Address Address Address Phone

Consultant Address Address Address Phone

Consultant Address Address Address Phone

DATE PROJECT NUMBER DRAWN BY

T O N

SITE PLAN

VICINITY MAP

BURRUSS HALL, ROOM 224A

BURRUSS HALL, ROOM 224A

VIRGINIA TECH, BLACKSBURG, VIRGINIA

TH R

AREA OF NEW CONSTRUCTION

TRUE NORTH

C JE O PR

PROJECT NORTH

CHECKED BY

COVER SHEET

A100

01 MAY 2018 2018_0001 KATIE GUILLEN M. WAGNER

KATIE GUILLEN INTERIOR DESIGN VIRGINIA TECH

COLLEGE OF ARCHITECTURE + DESIGN

222 BURRUSS HALL, BLACKSBURG, VA 24060

WALL LEGEND

EXISTING WALL

BURRUSS OPEN OFFICE

EXISTING FIRE WALL

VIRGINIA TECH

AREA LEGEND

EXISTING OFFICE. [E (EDUCATION)] 1282 SQ. FT.

EXISTING STUDIO. [E (EDUCATION)]

ISSUED FOR:

DATE:

6617 SQ. FT.

OPEN OFFICE. [A (ASSEMBLY)] 1316 SQ. FT.

TOILET ROOM. 332 SQ. FT.

A

B

C

D

E

F

G

H

Consultant Address Address Address Phone

AREA OF NEW CONSTRUCTION

1

Consultant Address Address Address Phone

Consultant Address Address Address Phone

2

3

DATE PROJECT NUMBER

EGRESS (BELOW)

DOWN

EGRESS PATH

DOWN

4 PROJECT NORTH

CHECKED BY

FIRE + LIFE SAFETY PLAN 1/8" = 1'-0"

2018_0001

EGRESS (BELOW) DRAWN BY

1

01 MAY 2018

FIRE AND LIFE SAFETY PLAN

A101

KATIE GUILLEN M. WAGNER

KATIE GUILLEN INTERIOR DESIGN VIRGINIA TECH

COLLEGE OF ARCHITECTURE + DESIGN

222 BURRUSS HALL, BLACKSBURG, VA 24060

BURRUSS OPEN OFFICE

VIRGINIA TECH

ISSUED FOR:

A

B

C

D

E

F

G

DATE:

H

Consultant Address Address Address Phone

1

Consultant Address Address Address Phone

Consultant Address Address Address Phone

2

3

DATE PROJECT NUMBER DRAWN BY

4 PROJECT NORTH

CHECKED BY

1

SECOND FLOOR EXISTING PLAN 1/8" = 1'-0"

EXISTING PLAN

A102

01 MAY 2018 2018_0001 KATIE GUILLEN M. WAGNER

KATIE GUILLEN INTERIOR DESIGN VIRGINIA TECH

COLLEGE OF ARCHITECTURE + DESIGN

222 BURRUSS HALL, BLACKSBURG, VA 24060

BURRUSS OPEN OFFICE

VIRGINIA TECH

ISSUED FOR:

DATE:

WALL LEGEND

EXISTING WALL

WALLS TO BE DEMOLISHED

A

B

C

D

E

F

G

H

Consultant Address Address Address Phone

1

Consultant Address Address Address Phone

Consultant Address Address Address Phone

2

3

DATE PROJECT NUMBER DRAWN BY

4 PROJECT NORTH

CHECKED BY

1

SECOND FLOOR DEMOLITION PLAN 1/8" = 1'-0"

DEMOLITION PLAN

A103

01 MAY 2018 2018_0001 KATIE GUILLEN M. WAGNER

KATIE GUILLEN INTERIOR DESIGN VIRGINIA TECH

COLLEGE OF ARCHITECTURE + DESIGN

222 BURRUSS HALL, BLACKSBURG, VA 24060

BURRUSS OPEN OFFICE

3' - 6" 0' - 7"

3' - 4"

2' - 4"

0' - 7"

TEMPERED GLASS. 7' - 6"

DORMA MANET HARDWARE. PASSAGE SET.

3' - 3"

SOLID MAPLE DOOR. SATIN VARNISH FINISH.

DORMA MANET HARDWARE. PASSAGE SET. SOLID MAPLE DOOR. SATIN VARNISH FINISH.

0' - 7"

7' - 0"

7' - 2"

RAW METAL TRACK FRAME. SATIN CLEAR COAT FINISH.

VIRGINIA TECH DOOR NUMBER

5

SOLID DOOR 1/4" = 1'-0"

4

SLIDING DOOR 1/4" = 1'-0"

101 DOOR TAG

6' - 0" 6' - 4" 3' - 0"

2' - 0"

2' - 0"

RAW METAL FRAME. SATIN CLEAR COAT FINISH. 3' - 6" 3' - 4"

ISSUED FOR:

DORMA CL800 HARDWARE. LOCK SET. FIRE RATED METAL DOOR WITH MAPLE VENEER. SATIN VARNISH FINISH.

DOOR NO

A

ENTRY DOOR 1/4" = 1'-0"

02

SMALL CONFERENCE TRANSPARENT TEMPERED SMALL CONFERENCE TRANSPARENT TEMPERED LARGE CONFERENCE TRANSPARENT TEMPERED M TOILET N/A W TOILET N/A

05 06

B

C

GLASS TYPE

OPEN OFFICE

04

2

ROOM NAME

01

03

GLASS DOOR 3 1/4" = 1'-0"

DATE:

DOOR SCHEDULE

FIRE RATED WIRE GLASS.

6' - 10"

3' - 2 3/4"

7' - 6"

DORMA FSW HARDWARE. PASSAGE SET.

7' - 4"

7' - 5"

RAW METAL LOW PROFILE FRAME WITH CLEAR SILICON JOINT. SATIN CLEAR COAT FINISH. TEMPERED GLASS.

FIRE RATED WIRE

D

MATERIAL

FINISH

WIDTH

HEIGHT

THICKNES S MATERIAL

FINISH

HDWR GROUP

SECURITY

FIRE RATING

COMMENTS

MTL/MPL

SATIN

6' - 0"

7' - 4"

0' - 1 3/4"

METAL

SATIN

DORMA CL800 LOCK SET

45 MINUTES

MAPLE

SATIN

3' - 4"

7' - 6"

0' - 1 5/8"

MAPLE

SATIN

PASSAGE

NR

MAPLE

SATIN

3' - 4"

7' - 6"

0' - 1 5/8"

MAPLE

SATIN

PASSAGE

NR

SLIDING DOOR LOCATION INSIDE SMALL CONF.

GLASS

N/A

6' - 4"

7' - 5"

0' - 0 1/2"

METAL

SATIN

DORMA MANET DORMA MANET DORMA FSW

EGRESS HDWR, SWING INTO EGRESS CORRIDOR SLIDING DOOR LOCATION INSIDE SMALL CONF.

PASSAGE

NR

SWING DIRECTION INDICATED ON PLAN

MAPLE MAPLE

SATIN SATIN

3' - 0" 3' - 0"

7' - 0" 7' - 0"

0' - 1 3/4" 0' - 1 3/4"

METAL METAL

SATIN SATIN

DORMA CL800 PASSAGE DORMA CL800 PASSAGE

NR NR

SWING DIRECTION INDICATED ON PLAN SWING DIRECTION INDICATED ON PLAN

E

F

G

H

Consultant Address Address Address Phone

1

Consultant Address Address Address Phone ---

Consultant Address Address Address Phone

2

05 03

02

06 ---

04

3

01

DATE PROJECT NUMBER DRAWN BY

4

CHECKED BY

PROJECT NORTH

7' - 6"

3' - 0" 3' - 2"

3' - 3"

3' - 2"

1

SECOND FLOOR PLAN 1/8" = 1'-0"

PLAN

A104

01 MAY 2018 2018_0001 KATIE GUILLEN M. WAGNER

KATIE GUILLEN INTERIOR DESIGN VIRGINIA TECH

COLLEGE OF ARCHITECTURE + DESIGN

222 BURRUSS HALL, BLACKSBURG, VA 24060

BURRUSS OPEN OFFICE

VIRGINIA TECH

WALL LEGEND

FLOOR PLAN SYMBOLS

DRAWING NUMBER

1

A1.0

EXISTING WALL SHEET NUMBER

INTERIOR ELEVATION

DRAWING NUMBER

1 A1.0

SHEET NUMBER

BUILDING SECTION

ISSUED FOR:

DATE:

DRAWING NUMBER

1 A1.0

NEW CURTAIN WALL

SHEET NUMBER

WALL SECTION

D B

NEW METAL STUD WALL

E

C

3

1

1

4

A106

A107

A106

A106

8' - 7 1/4"

7' - 8 3/4"

6' - 10 3/4"

16' - 8 7/8"

Consultant Address Address Address Phone

16' - 2 7/8"

2' - 0"

2

A104

5

5' - 5"

5' - 1 1/2"

A108

3' - 6 1/2"

5' - 2 1/2"

23' - 2 1/4"

21' - 10 1/2"

Consultant Address Address Address Phone

A104

3

6 5

5

5' - 4"

4 A108

Consultant Address Address Address Phone

A106

4

7

1' - 6"

5' - 5 1/2"

88 .0 0°

92 .0 0°

9' - 3 1/2"

8' - 9 1/4"

3' - 1 1/2"

2' - 6 9/32"

2

9' - 6 3/4"

2

-

A107 3

A104

A104

A108

1

5' - 0"

2

2' - 4 1/4"

1' - 1 1/4"

PROJECT NUMBER 2

2' - 6 1/2"

22' - 6 1/2"

10' - 1 7/8"

5' - 10"

A107

12' - 0"

DATE

3 11' - 5 3/4"

DRAWN BY CHECKED BY

23' - 2 3/4"

2' - 9"

PROJECT NORTH

3

2' - 6 3/4"

2 A108

3' - 6 1/2"

3

12' - 4 3/4"

A106

2

ENLARGED OPEN OFFICE PLAN 1/4" = 1'-0"

1

ENLARGED TOILET ROOM PLAN 1/4" = 1'-0"

ENLARGED PLAN

A105

01 MAY 2018 2018_0001 KATIE GUILLEN M. WAGNER

KATIE GUILLEN INTERIOR DESIGN VIRGINIA TECH

COLLEGE OF ARCHITECTURE + DESIGN

222 BURRUSS HALL, BLACKSBURG, VA 24060

BURRUSS OPEN OFFICE

5

WEST-EAST SECTION 1/4" = 1'-0"

4

9' - 11"

9' - 6"

10' - 1"

VIRGINIA TECH

ISSUED FOR:

DATE:

NORTH-SOUTH SECTION 1/4" = 1'-0"

Consultant Address Address Address Phone

Consultant Address Address Address Phone

3

7' - 10"

1' - 3"

DATE

7' - 6"

7' - 10"

9' - 6"

9' - 4 3/4"

7' - 10"

9' - 6"

9' - 0 3/4"

9' - 6"

7' - 10"

PROJECT NUMBER

2' - 6"

7' - 6"

8' - 7"

9' - 6"

9' - 11"

10' - 1"

7' - 10"

2 A110

NORTH-SOUTH SECTION 1/4" = 1'-0"

Consultant Address Address Address Phone

DRAWN BY CHECKED BY

INTERIOR SECTIONS 2

WEST-EAST SECTION 1/4" = 1'-0"

1

SOUTH-NORTH SECTION 1/4" = 1'-0"

A106

01 MAY 2018 2018_0001 KATIE GUILLEN M. WAGNER

KATIE GUILLEN INTERIOR DESIGN VIRGINIA TECH

COLLEGE OF ARCHITECTURE + DESIGN

222 BURRUSS HALL, BLACKSBURG, VA 24060

BURRUSS OPEN OFFICE

VIRGINIA TECH

ISSUED FOR:

TOP OF SLAB

TOP OF SLAB

TOP OF SLAB

BOTTOM OF SLAB

BOTTOM OF SLAB

DOUBLE 2X6 METAL STUD TOP PLATE.

0' - 5"

0' - 5"

0' - 5"

BOTTOM OF SLAB

DATE:

COMPOUND CEILING GYPSUM BOARD ON 3 5/8" METAL.

DOUBLE 2X6 METAL STUD TOP PLATE.

1/2" GYPSUM WALLBOARD. TYPICAL EXTENDBEYOND CEILING. INSIDE FACE TO BE PAINT FINISH.

NEW OR EXISTING WALL INSIDE FACE TO BE PAINT FINISH.

1/2" GYPSUM WALL BOARD. TYPICAL EXTEND BEYOND CEILING. INSIDE FACE TO BE PAINT FINISH. STUD LENGTH VARIES 2' - 0 1/8"

COMPOUND CEILING GYPSUM BOARD ON 3 5/8" METAL FRAME.

2' - 0"

COMPOUND CEILING GYPSUM BOARD ON 3 5/8" METAL FRAME.

1/2" PLYWOOD SHEATHING. TYPICAL.

3/4" PLYWOOD SHEATHING. TYPICAL. ACOUSTIC BATT INSULATION. FILL BETWEEN STUDS. TYPICAL.

1/2" MDF WALL PANEL WITH COMMERCIAL GRADE FLAT METAL SURFACE FINISH UNLESS OTHERWISE NOTED.

1/2" FINISH GRADE PLYWOOD MILLWORK ASSEMBLY. SURFACE TO BE MAPLE VENEER WITH SATIN VARNISH FINISH.

Consultant Address Address Address Phone

2X6 METAL STUD @ 16" O.C.

Consultant Address Address Address Phone

DOUBLE 2X6 METAL STUD BASE PLATE. ADDITIONAL 2X4METAL STUDS FOR CANTILEVER REINFORCEMENT.

METAL SHADOW REVEAL PANEL CUP. SEE SHEET A109 FOR DETAILS. 7' - 0"

2X4 METAL STUD @ 16" O.C.

1/2" MDF WALL PANEL WITH COMMERCIAL GRADE FLAT METAL SURFACE FINISH UNLESS OTHERWISE NOTED.

4' - 11 5/8"

5' - 0"

ACOUSTIC BATT INSULATION. FILL BETWEEN STUDS FLOOR TO SLAB. TYPICAL.

ACOUSTIC BATT INSULATION. FILL BETWEEN STUDS. TYPICAL.

Consultant Address Address Address Phone

DOUBLE 2X4 METAL STUD EDGE PLATE.

2X4 METAL STUD @ 16" O.C. DOUBLE 2X4 METAL STUD EDGE PLATE. ACOUSTIC BATT INSULATION FILL BETWEEN STUDS. TYPICAL. METAL STUD @ 16" O.C. ADDITIONAL 2X4 METAL STUDS FOR CANTILEVER REINFORCEMENT. DOUBLE 2X6 METAL STUD TOP PLATE.

2' - 2"

2' - 2"

METAL SHADOW REVEAL PANEL CUP. SEE SHEET A109 FOR DETAILS.

STUD LENGTH VARIES

4" CONTINUOUS METAL WALL BASE.

2' - 2 1/4"

2 A109

1/2" GYPSUM WALL BOARD. TYPICAL. INSIDE FACE TO BE PAINT FINISH.

DRAWN BY

3/4" PLYWOOD SHEATHING. TYPICAL.

CHECKED BY

FINISHED FLOOR

FINISHED FLOOR

FINISHED FLOOR

2

TYP. METAL PANEL WALL 1" = 1'-0"

4" CONTINUOUS METAL WALL BASE.

1

BOX WINDOW SECTION 1" = 1'-0"

WALL SECTIONS

0' - 4"

1 A109

0' - 4"

0' - 4"

PROJECT NUMBER

2X6 METAL STUD BASE PLATE.

4" CONTINUOUS METAL WALL BASE.

TYP. WOOD PANEL WALL 1" = 1'-0"

ACOUSTIC BATT INSULATION. FILL BETWEEN STUDS. TYPICAL.

2X6 METAL STUD @ 16" O.C.

2X4 METAL STUD BASE PLATE.

3

DATE

A107

01 MAY 2018 2018_0001 KATIE GUILLEN M. WAGNER

KATIE GUILLEN INTERIOR DESIGN VIRGINIA TECH

COLLEGE OF ARCHITECTURE + DESIGN

222 BURRUSS HALL, BLACKSBURG, VA 24060

BURRUSS OPEN OFFICE

VIRGINIA TECH

TEMPERED CURTAIN WALL GLAZING @ CONFERENCE ROOM WALL.

SEE SHEET A110 FOR CEILING CANOPY DETAILS.

ISSUED FOR:

7

1/2" MDF WALL PANEL WITH COMMERCIAL GRADE POLISHED METAL SURFACE FINISH.

ELEVATION 1/4" = 1'-0"

EXISTING STOREFRONT WINDOW.

1/2" FINISH GRADE PLYWOOD PANEL SURFACE TO BE MAPLE VENEER WITH SATIN VARNISH FINISH.

0' - 5"

1/2" MDF WALL PANEL WITH COMMERCIAL GRADE FLAT METAL SURFACE FINISH.

5' - 0"

Consultant Address Address Address Phone

0' - 4"

2' - 2"

9' - 11"

2' - 0"

Consultant Address Address Address Phone

6

EXISTING WINDOW ..

1/2" MDF WALL PANEL WITH COMMERCIAL GRADE POLISHED METAL SURFACE FINISH.

ELEVATION 1/4" = 1'-0"

1/2" MDF WALL PANEL WITH COMMERCIAL GRADE FLAT METAL SURFACE FINISH.

5

TEMPERED CURTAIN WALL GLAZING @ BOX WINDOW.

1/2" MDF WALL PANEL WITH COMMERCIAL GRADE FLAT METAL SURFACE FINISH.

4" CONTINUOUS METAL WALL BASE.

Consultant Address Address Address Phone

ELEVATION 1/4" = 1'-0"

1/2" FINISH GRADE PLYWOOD PANEL SURFACE TO BE MAPLE VENEER WITH SATIN VARNISH FINISH.

EXPOSED GYPSUM WALL BOARD TO BE PAINT FINISH.

DATE PROJECT NUMBER DRAWN BY CHECKED BY

INTERIOR ELEVATIONS 4

ELEVATION 1/4" = 1'-0"

DATE:

3

ELEVATION 1/4" = 1'-0"

2

ELEVATION 1/4" = 1'-0"

1

ELEVATION 1/4" = 1'-0"

A108

01 MAY 2018 2018_0001 KATIE GUILLEN M. WAGNER

KATIE GUILLEN INTERIOR DESIGN VIRGINIA TECH

COLLEGE OF ARCHITECTURE + DESIGN

222 BURRUSS HALL, BLACKSBURG, VA 24060

BURRUSS OPEN OFFICE

VIRGINIA TECH

ISSUED FOR:

0' - 0 3/4"

DATE:

0' - 1 1/4"

"RETAINER" CLIP BY FRYE REGLET.

0' - 1 1/2" 0' - 0 3/4"

1/2" FINISH GRADE PLYWOOD MILLWORK ASSEMBLY. SURFACE TO BE MAPLE VENEER WITH SATIN VARNISH FINISH

ACOUSTIC BATT INSULATION. FILL BETWEEN STUDS. TYPICAL.

Consultant Address Address Address Phone

2X4 METAL STUD @ 16" O.C.

ADDITIONAL 2X4 METAL STUDS FOR CANTILEVER REINFORCEMENT.

ACOUSTIC BATT INSULATION FILL BETWEEN STUDS FLOOR TO SLAB. TYPICAL.

Consultant Address Address Address Phone

DOUBLE 2X6 METAL STUD TOP PLATE.

2X4 METAL STUD @ 16" O.C.

1/2" MDF WALL PANEL WITH COMMERCIAL GRADE FLAT METAL SURFACE FINISH UNLESS OTHERWISE NOTED.

Consultant Address Address Address Phone

ACOUSTIC BATT INSULATION. FILL BETWEEN STUDS. TYPICAL.

1/2" GYPSUM WALL BOARD. TYPICAL.

2X6 METAL STUD @ 16" O.C.

1/2" PLYWOOD SHEATHING. TYPICAL.

"BASE" CLIP BY FRYE REGLET. 1/2" GYPSUM WALL BOARD. TYPICAL. 3/4" PLYWOOD SHEATHING. TYPICAL. "BASE" CLIP BY FRYE REGLET. DATE METAL PANEL SPACER EDGE DETAIL.

METAL PANEL SPACER EDGE DETAIL.

2X4 METAL STUD BASE PLATE.

2X6 METAL STUD BASE PLATE. 4" CONTINUOUS METAL WALL BASE

4" CONTINUOUS METAL WALL BASE.

PROJECT NUMBER DRAWN BY CHECKED BY

INTERIOR WALL DETAILS 2

WOOD PANEL WALL DETAIL 3" = 1'-0"

1

BOX WINDOW WALL DETAIL 3" = 1'-0"

A109

01 MAY 2018 2018_0001 KATIE GUILLEN M. WAGNER

KATIE GUILLEN INTERIOR DESIGN VIRGINIA TECH

COLLEGE OF ARCHITECTURE + DESIGN

222 BURRUSS HALL, BLACKSBURG, VA 24060

BURRUSS OPEN OFFICE

4

7' - 10"

CANOPY MILLWORK 3D VIEW

VIRGINIA TECH

7' - 10"

7' - 10"

7' - 10"

7' - 10"

1' - 3"

DATE:

8' - 6 1/2"

1' - 0 3/4"

0' - 2"

1' - 0 3/4"

1' - 0 3/4"

0' - 2"

1' - 0 3/4"

0' - 10 3/4"

0' - 2"

1' - 0 3/4"

ISSUED FOR:

1' - 1"

0' - 11"

Consultant Address Address Address Phone

3

Consultant Address Address Address Phone

CANOPY MILLWORK RCP 3/4" = 1'-0" CANOPY MODULE CUP SYSTEM TO ATTACH TO CEILING STRUCTURE ABOVE

2

Consultant Address Address Address Phone

1' - 11 1/4"

2' - 4 1/4"

° 32 4.

8 2

0' - 4 1/4"

88 .7 8°

1' - 10 1/4"

91 .2 2°

8° .7 8 8

1' - 10 1/4"

0' - 4 1/4"

1' - 10 1/4"

0' - 6 1/4"

86 .3 5°

93 .6 5°

0' - 4 1/4"

0' - 10 1/4"

° 35 .

86

2° .2 91

5° .6 93

0' - 4 1/4"

CEILING STRUCTURE ABOVE

8° .6 75

CANOPY MILLWORK SELECTION 3/4" = 1'-0" CEILING CANOPY MODULES TO BE SEPARATED WITH 1/4" METAL SPACERS.

CEILING CANOPY MODULE SIDE PANEL. MODULES TO BE CLOSED ON ALL SIX SIDES FOR STRUCTURAL INTEGRITY. DATE PROJECT NUMBER DRAWN BY CHECKED BY

MILLWORK DETAILS

1

CANOPY MILLWORK ELEVATION 3/4" = 1'-0"

A110

01 MAY 2018 2018_0001 KATIE GUILLEN M. WAGNER

KATIE GUILLEN INTERIOR DESIGN VIRGINIA TECH

COLLEGE OF ARCHITECTURE + DESIGN

222 BURRUSS HALL, BLACKSBURG, VA 24060

BURRUSS OPEN OFFICE

VIRGINIA TECH

AREA LEGEND

POLISHED CONCRETE. OPEN OFFICE. ISSUED FOR:

DATE:

553 SQ. FT.

SOLID MAPLE. OPEN OFFICE. 695 SQ. FT.

6" x 6" CERAMIC TILE. TOILET ROOM. 332 SQ. FT.

A

B

C

D

E

F

G

H

Consultant Address Address Address Phone

1

Consultant Address Address Address Phone

SOLID MAPLE FLOOR. SATIN VARNISH FINISH.

Consultant Address Address Address Phone

POLISHED CONCRETE FLOOR. ACRYLIC SEALANT FINISH.

2 SOLID MAPLE FLOOR. SATIN VARNISH FINISH.

6" x 6" CERAMIC TILE. FLAT FINISH.

SOLID MAPLE FLOOR. SATIN VARNISH FINISH.

3

DATE PROJECT NUMBER DRAWN BY

4 PROJECT NORTH

CHECKED BY

1

SECOND FLOOR FINISH PLAN 1/8" = 1'-0"

FINISH PLAN

A111

01 MAY 2018 2018_0001 KATIE GUILLEN M. WAGNER

KATIE GUILLEN INTERIOR DESIGN VIRGINIA TECH

COLLEGE OF ARCHITECTURE + DESIGN

222 BURRUSS HALL, BLACKSBURG, VA 24060

BURRUSS OPEN OFFICE

FURNITURE SCHEDULE DESCRIPTION AERON WORK CHAIR

MANUFACTURER HERMAN MILLER, INC.

COUNT 44

GOETZ SOFA MAPLE TABLE - 36"x72" MAPLE TABLE - 36"x96" MAPLE TABLE - 60"x212"

HERMAN MILLER, INC. GLOBAL SYSTEMS GLOBAL SYSTEMS GLOBAL SYSTEMS

2 2 3 2

Q_BIC TABLE VERY CONFERENCE CHAIR

HAWORTH HAWORTH

1 129

LTB BENCH RESIDE WORKSURFACE 30"x66"

HAWORTH HAWORTH

3 129

VIRGINIA TECH

COMMENTS LOCATED IN OPEN OFFICE, AND EXISTING STUDIO. LOCATED IN OPEN OFFICE. LOCATED IN OPEN OFFICE. LOCATED IN OPEN OFFICE. LOCATED IN OPEN OFFICE, AND EXISTING STUDIO. LOCATED IN OPEN OFFICE. LOCATED IN EXISTING OFFICES, AND EXISTING STUDIO. LOCATED IN OPEN OFFICE. LOCATED IN EXISTING OFFICES, AND EXISTING STUDIO.

ISSUED FOR:

A

B

D

AERON WORK CHAIR. HERMAN MILLER, INC. 2' - 7 1/2" 5' - 0"

VERY CONFERENCE CHAIR. HAWORTH.

5' - 0"

4' - 0"

5' - 0"

4' - 0"

5' - 0"

4' - 0"

5' - 0"

4' - 0"

5' - 0" 3' - 4 1/2"

5' - 0"

4' - 0"

5' - 0"

4' - 0"

5' - 0"

4' - 0"

5' - 0"

4' - 0"

5' - 0"

4' - 0"

5' - 5"

3' - 0" 3' - 0" 2' - 6"

6' - 4"

4' - 7"

5' - 0"

4' - 0"

5' - 0"

4' - 0"

5' - 0"

4' - 0"

5' - 0"

4' - 0"

5' - 0"

3' - 0 1/4"

2' - 4"

Consultant Address Address Address Phone

1' - 1 1/2" 8' - 2 1/2"

1' - 1 1/2"

4' - 0"

Consultant Address Address Address Phone

5' - 6"

4' - 8" 4' - 7"

Consultant Address Address Address Phone

4' - 9 1/2"

3' - 0"

8' - 0" 3' - 0"

17' - 8"

4' - 7"

5' - 0"

3' - 2 1/4"

3' - 0"

3' - 7"

5' - 6" 6' - 8 1/4"

17' - 8"

3' - 6 3/4" 3' - 4 1/2" 5' - 0"

5' - 0"

5' - 6"

4' - 4" 5' - 0"

5' - 6" 3' - 8 1/2" 3' - 8"

8' - 11"

5' - 6" 4' - 8 1/2"

4' - 0"

5' - 10 1/2"

4' - 0"

5' - 6" 3' - 7 1/2" 3' - 9"

5' - 0"

5' - 6"

4' - 0"

5' - 5 3/4"

3

H

VERY CONFERENCE CHAIR. HAWORTH.

3' - 7"

4' - 0" 2' - 6"

G

RESIDE WORKSURFACE - 66" x 30".

HAWORTH.

5' - 6"

2

F MAPLE TABLE - 60" x 212".

GLOBAL SYSTEMS.

5' - 6"

1

E

RESIDE WORKSURFACE - 66" x 30".

HAWORTH.

5' - 10 1/2"

5' - 0"

C

DATE:

7' - 1"

2' - 6"

0' - 6"

7' - 1"

2' - 6" 4' - 0"

2' - 4"

0' - 6"

4 DATE PROJECT NUMBER Q-BIC TABLE. HAWORTH.

MAPLE TABLE - 60" x 212".

GLOBAL SYSTEMS.

GOETZ SOFA. HERMAN MILLER, INC. LTB BENCH. HAWORTH.

1

SECOND FLOOR FURNITURE PLAN 1/8" = 1'-0"

AERON WORK CHAIR. HERMAN MILLER, INC.

AERON WORK CHAIR. HERMAN MILLER, INC.

MAPLE TABLE - 36" x 96".

GLOBAL SYSTEMS.

MAPLE TABLE - 36" x 72".

GLOBAL SYSTEMS.

AREA RESERVED FOR EXISTING LAB PRINTERS.

DRAWN BY CHECKED BY

PROJECT NORTH

AERON WORK CHAIR. HERMAN MILLER, INC.

FURNITURE PLAN

A112

01 MAY 2018 2018_0001 KATIE GUILLEN M. WAGNER

KATIE GUILLEN INTERIOR DESIGN VIRGINIA TECH

COLLEGE OF ARCHITECTURE + DESIGN

222 BURRUSS HALL, BLACKSBURG, VA 24060

BURRUSS OPEN OFFICE

VIRGINIA TECH

ISSUED FOR:

POWER AND DATA SYMBOLS

QUADRAPLEX RECEPTACLE

DATA RECEPTACLE

A

B

C

D

E

F

G

DATE:

INSTALL @ 18" AFF UNLESS OTHERWISE NOTED

INSTALL @ 18" AFF UNLESS OTHERWISE NOTED

H

Consultant Address Address Address Phone

1

Consultant Address Address Address Phone

INSTALL POWER AND DATA RECEPTACLES @ 34" AFF.

2

Consultant Address Address Address Phone

INSTALL "GFI" RECEPTACLES @ 18" AFF.

3

DATE PROJECT NUMBER DRAWN BY

4 PROJECT NORTH

CHECKED BY

1

SECOND FLOOR POWER + DATA PLAN 1/8" = 1'-0"

POWER + DATA PLAN

A113

01 MAY 2018 2018_0001 KATIE GUILLEN M. WAGNER

KATIE GUILLEN INTERIOR DESIGN VIRGINIA TECH

COLLEGE OF ARCHITECTURE + DESIGN

222 BURRUSS HALL, BLACKSBURG, VA 24060

BURRUSS OPEN OFFICE

VIRGINIA TECH

ISSUED FOR:

A

B

C

D

E

F

G

DATE:

H

Consultant Address Address Address Phone

1

Consultant Address Address Address Phone

2 A115

Consultant Address Address Address Phone

2

1 A115

3 A110

3

DATE PROJECT NUMBER DRAWN BY

4 PROJECT NORTH

CHECKED BY

1

SECOND FLOOR RCP 1/8" = 1'-0"

RCP

A114

01 MAY 2018 2018_0001 KATIE GUILLEN M. WAGNER

KATIE GUILLEN INTERIOR DESIGN VIRGINIA TECH

COLLEGE OF ARCHITECTURE + DESIGN

222 BURRUSS HALL, BLACKSBURG, VA 24060

BURRUSS OPEN OFFICE

LIGHTING LEGEND

96" (48" x 2") CONCEALED FLUORESCENT STRIP LIGHT

VIRGINIA TECH

6" RECESSED COMPACT FLUORESCENT DOWNLIGHT

CEILING MOUNTED EXIT SIGN (LIGHTED) ARROWS INDICATE DIRECTION OF EXIT

2' x 2' SUPPLY AIR GRILLE

ISSUED FOR:

DATE:

2' x 2' RETURN AIR GRILLE

SWITCH

6' - 0"

6' - 0"

GWB 9'-11" AFF

4' 4' -- 3" 0"

4' - 0"

2' - 6"

0' - 9 3/4"

5' - 5 1/2"

3' - 9 3/4"

5

2' - 0"

A108

Consultant Address Address Address Phone

A104

4' - 0"

1

4' - 0"

A108

4' - 0"

A104

MAPLE ACT 9'-0" AFF

4' - 0"

A104

6' - 0"

-

8' - 6 1/2"

MAPLE ACT 9'-0" AFF

3

2 A108

6' - 0"

6' - 0"

GWB 9'-11" AFF

6' - 0"

6' - 0"

SEE SHEET A110 FOR CEILING CANOPY DETAILS

DATE PROJECT NUMBER

3

DRAWN BY

1' - 5 1/2"

6' - 0"

3' - 1 17/32"

2' - 0"

2 4' - 6"

3

0' - 5 1/2"

6' - 0"

MAPLE ACT 9'-11" AFF

0' - 5 1/2"

6" RECESSED DOWNLIGHT TYPICAL

2' - 3"

2' - 0"

4

2' - 3"

MAPLE ACT 9'-11" AFF

2' - 0"

A104

Consultant Address Address Address Phone

6' - 6 1/2"

MAPLE ACT 10'-1" AFF

3' - 2"

4' - 6"

GWB 10'-1" AFF

6' - 0"

5

2

3' - 10"

2' - 0"

3' - 6"

6' - 0"

2' - 0"

GWB 9'-11" AFF

Consultant Address Address Address Phone

GWB BULKHEAD FROM CEILING @ 9'-6" AFF.

GWB 7'-6" AFF GWB 9'-11" AFF

3' - 6"

SUPPLY AIR GRILLE TYPICAL

E

6' - 0"

1' - 5 3/4"

RETURN AIR GRILLE TYPICAL

2

D

C

6' - 0"

B

PROJECT NORTH

CHECKED BY

2

ENLARGED OPEN OFFICE RCP 1/4" = 1'-0"

1

ENLARGED TOILET ROOM RCP 1/4" = 1'-0"

ENLARGED RCP

A115

01 MAY 2018 2018_0001 KATIE GUILLEN M. WAGNER