Steps to Setup Brother MFC J491dw Printer& Brother MFC J497dw Printer

Steps to Setup Brother MFC J491dw Printer& Brother MFC J497dw Printer?

Toll-Free : USA : +1-888-633-7151 UK : +44-808-164-5280

How to Setup Brother MFC J491dw Printer?

Setup Brother MFC J491dw Printer & Brother MFC J497dw Printer ✓ WINDOWS SETUP: • You can print and scan from your windows computer by connecting your brother MFC j491dw printer to your windows computer. You can use either a USB cable or a wireless network connection to link your MFC j491dw printer. Connecting your j491dw printer using a USB cable allows you to scan and print from your windows setup and it is as follows: • Unboxed your nee brother MFC j491dw and Remove the packaging materials from your j491dw then Open the top cover of your MFC j491dw Move all eight drum locks to the specified directions.

• Remove each drum unit and toner cartridge assembly and remove from each assembly the colored orange packing materials. Also remove from the belt unit the orange packing materials discovered under the drum unit and the toner cartridge assembly.

How to Setup Brother MFC J491dw Printer?

• Then shake each side of the drum unit and toner cartridge assembly to free the toner cartridges.

• Now, as specified in the MFC j491dwprinter, install the drum unit and toner cartridge assembly in the holders and close the top cover And then open the paper tray and extend the paper extension and load as many papers as possible. Now, near the tray of paper.

• Connect the power cord to an electrical outlet and your printer.

Power your j491dw Once your MFC j491dwprinter is prepared with the first setup, connect the USB cable to the laptop at once. You must also connect your laptop to an active network link.

• Once your computer is connected to the j491dwprinter, the built-in drivers for your j491dw Brother MFC printer will be automatically downloaded to your j491dw Brother MFC While connecting to the USB cable, make sure you place your computer and printer at a minimum distance.

✓ MAC SETUP: • Unboxed your Brother MFC j491dw Remove the packaging materials from your j491dw Open the top cover of your j491dw Move all eight drum locks to the designated instructions.

• Remove each drum unit and toner cartridge assembly and remove from each assembly the colored orange packing materials. Also remove from the belt unit the orange packing materials discovered under the drum unit and the toner cartridge assembly.

• Then shake each side of the drum unit and toner cartridge assembly to free the toner cartridges.

• Now, as specified in the MFC j491dwprinter, install the drum unit and toner cartridge assembly in the holders and close the top cover And then open the paper tray and extend the paper extension and load as many papers as possible. Now, near the tray of paper.

• Connect the power cord to an electrical outlet and your printer.

• Power your j491dw Connect a network link to your Mac computer.

• Type and search sister MFC j491dwdrivers for Mac in your device’s browser.

Call for Setup Brother MFC J491dw Printer & Setup Brother MFC J497dw Printer and Installation Support : +1-844-266-0040

GET IN TOUCH WITH US

Toll-Free : USA : +1-888-633-7151 UK : +44-808-164-5280

Mail us : support@brotherprintersupport247.com