Environment - Product Catalog 2020 by KAISER+KRAFT România

ENVIRONMENT • STORING AND FILLING HAZARDOUS SUBSTANCES

from page 382

• HAZARDOUS GOODS CONTAINERS, SAFETY CUPBOARDS • ABSORBENT AGENTS, PUMPS, SAFETY CONTAINERS • INDUSTRIAL CLEANING

from page 432 from page 442

from page 455

ENVIRONMENT

• WASTE COLLECTORS AND ASHTRAYS FOR INDOORS AND OUTDOORS

from page 409

2250.00

RON Nr. 175 788-1E

Environmental and chemical storage cupboards

23593

For safe storage of water h azardous liquids, with leak-proof, welded tray shelves. Large range of models from page 418.

Absorbent agents and products for spillage management can be found on pages 432 – 434 and in our webshop at www.export.kaiserkraft.com/ bindingagents YELLOW = Ex stock

Telefon 0250 702 110 service@kaiserkraft.ro

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

381

Information on storage of hazardous materials

Guide to hazardous goods storage

How to store flammable and water polluting liquids according to regulations. In general, please observe the specific regulations, provisions and laws with regard to approvals and stipulated capacities, etc.

Regarding suitability and resistance requirements, the hazard symbols for various media to be stored are shown below (these symbols can also be found on hazardous material containers).

Certifications

Installation and storage of sump trays To protect groundwater, containers utilised for the storage of flammable or water h azardous liquids must be secured against leakage by means of an appropriate sump tray. Sump trays should only be located on a flat surface under cover. In accordance with COSHH guidance, a sump tray must be able to accommodate the contents of the largest container or at least 10% of the total quantity stored.

Manufacture’s declaration of conformity (ÜHP) in accordance with German construction regulation list A part 1, DIBt, Berlin

General Building Inspection Approval DIBt, Berlin

American (U.S.A) test certificates

Example Steel sump trays for the storage of flammable liquids in GHS categories 1 – 3 as well as water hazardous liquids in GHS categories 1 – 4. PE sump trays for the storage of water hazardous liquids in GHS categories 1 – 4. Not approved for the storage of flammable media in Germany.

Storage of 2 drums, each with 200 litre capacity –O verall storage quantity = 400 litres, of which 10% = 40 litres – Largest container = 200 litres Mandatory sump tray capacity = 200 litres Note! If the total volume of a hazardous chemical is large (CTC or IBC), the sump should be sized to contain 100% of the volume of the containers stored upon it.

Factory Mutual (independent testing agency)

Environmental Protection Agency

Occupational Safety and Health Agency National Fire Protection Agency

Uniform Fire Code

Classification / labelling of water hazardous liquids

Resistance of the materials Tip Unless otherwise stated in the list of r esistant materials, the material for the sump can usually be the same as the m aterial used to manufacture the storage container.

Glossary of terms and abbreviations used

AS YET according to WHG (until 30/11/2010) Classification

Hazard symbol

R set

Hazard category

severe water hazard

–

WHC 3

water hazard

R 50, R 50/53, R 51/53

WHC 2

slight water hazard

R 52/53, R 53

WHC 1

NEW according to GHS / REACH (effective 01/12/2010)

ADR / RID Regulations for international transport of hazardous material by rail and road BetrSichV Company safety directive DIBt German Institute for Construction Technology GGVSEB Regulations for transporting hazardous material by rail, road and inland w aterway GHS Globally Harmonized System of Classification and Labelling of Chemicals. Standardised international system for the classification and labelling of c hemicals (substances and mixtures). IBC / CTC Intermediate Bulk Container / Cubic Tank Container. Internationally approved bulk packaging containers for liquid hazardous goods. StawaR Steel sump directive (up to 1000 litres) TRbF Technical regulations for combustible liquids TRG Technical regulations for compressed gases ÜHP Manufacturer's declaration of conformity following product testing by a recognised institution WHG Water Management Act

Classification

Hazard symbol

acute water hazard chronic water hazard chronic water hazard chronic water hazard chronic water hazard

382 www.kaiserkraft.ro

Toxic (T) Highly toxic (T+)

H 400 H 410 H 411 H 412 H 413

GHS category 1 GHS category 1 GHS category 2 GHS category 3 GHS category 4

AS YET according to GefstoffV (until 30.11.2010) Classification

Hazard symbol

highly flammable

Criteria flash point boiling point

R set

> 0 °C, ≤ 35 °C R 12

flammable flash point > 21 °C R 11, R 15, R 17 ≥ 21 °C, ≤ 55 °C R 10

NEW according to GHS / REACH (effective 01/12/2010) Classification

Corrosive (C)

Hazard category

Classification / labelling of flammable liquids

combustible flash point

Additional hazardous goods symbols (GHS)

H set

Hazard symbol

Criteria

H set

Hazard category

highly flammable

flash point boiling point

> 23 °C, H 224 ≤ 35 °C

GHS category 1

easily flammable

flash point boiling point

> 23 °C, H 225 > 35 °C

GHS category 2

≥ 23 °C, H 226 ≤ 60 °C

GHS category 3

flammable flash point

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

BLUE = Short delivery period

22840

The corrosion resistance of the sump tray materials used and their suitability for use with the stored media must be certified. This is the user's responsibility. Please always observe the lists of resistant materials and safety data sheets (CHIP) for the material to be stored.

This information applies only to G ermany, is not liable for completeness and is not binding. As a general rule, please observe local regulations. Your local authority will be able to provide detailed information.

Regarding certification, the logos for the relevant test certificates are also shown.

Steel small container universal trays • H ighly versatile: for dispensing and transferring liquids, as a workbench sump etc. • Light, simple trays without certification • Also suitable for the storage of flammable and water hazardous media in countries without approval requirements

Model Sump capacity Length x width Height zinc plated powder coated

light blue RAL 5012

Accessories Perforated metal grate, zinc plated

Made of seamlessly welded sheet steel. Zinc plated perforated sheet metal grates as an accessory.

4 3 1

l mm mm Ref. RON Ref. RON

12 470 x 470 60 116 113-1E 230.00 116 137-1E 215.00

25 940 x 470 60 116 116-1E 290.00

30 1200 x 470 60 116 118-1E 365.00

40 1200 x 600 70 116 120-1E 465.00

Ref.

116 115-1E

116 117-1E

116 119-1E

116 121-1E

RON

265.00

325.00

400.00

525.00

from RON

215.00

With perforated metal grate (accessory)

Manufacture’s declaration of conformity (ÜHP) in accordance with German construction regulation list A part 1, DIBt, Berlin

Steel small container sump trays • R obust trays with declaration of conformity in accordance with StawaR • Also for use on existing shelves in cupboards and shelf units

Approved for flammable liquids in GHS categories 1 – 3 as well as water hazardous liquids in GHS categories 1 – 4. Made of seamlessly welded 3 mm sheet steel.

Zinc plated perforated sheet metal grates as an accessory.

Model Sump capacity Length x width Height zinc plated powder coated

light blue RAL 5012

Accessories Perforated metal grate, zinc plated

l mm mm Ref. RON Ref. RON

20 940 x 370 60 116 123-1E 525.00 116 124-1E 525.00

25 940 x 470 60 116 126-1E 625.00 116 127-1E 625.00

30 1000 x 600 70 116 129-1E 645.00 116 131-1E 645.00

60 1850 x 600 60 116 135-1E 925.00

Ref.

116 125-1E

116 128-1E

116 132-1E

116 136-1E

RON

230.00

265.00

325.00

465.00

1 3 With perforated metal grate (accessory)

from RON

525.00

ENVIRONMENT

For safe, regulation compliant storage of small containers

Plastic sump trays can be found from page 394.

Manufacture’s declaration of conformity (ÜHP) in accordance with German construction regulation list A part 1, DIBt, Berlin

Steel small container pallet trays Safe transport and storage of small containers • T rays fit perfectly – even when combined – on Euro or chemical pallets • Robust trays with declaration of conformity in accordance with StawaR

Approved for flammable liquids in GHS categories 1 – 3 as well as water hazardous liquids in GHS categories 1 – 4. Made of zinc plated, seamlessly welded 3 mm sheet steel.

4 1

Zinc plated grates available as an accessory.

Model

26314

Sump capacity Length x width Height Max. load zinc plated Accessories Steel grate, zinc plated

l mm mm kg Ref. RON

20 600 x 400 120 50 116 139-1E 575.00

40 800 x 600 120 100 116 141-1E 775.00

60 1200 x 600 120 200 116 145-1E 995.00

60 1200 x 800 100 200 116 143-1E 995.00

Ref. RON

116 140-1E 300.00

116 142-1E 475.00

116 146-1E 490.00

116 144-1E 545.00

YELLOW = Ex stock

Telefon 0250 702 110 service@kaiserkraft.ro

With steel grate (accessory)

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

383

from RON

Sump trays made of sheet steel

825.00

For regulation compliant storage and filling of small containers, 60 and 200 litre drums, as well as tank containers

★ 5 year guarantee ★ From selected suppliers ★ Value for money

• Cost effective, robust and durable Trays with fork guides For safe transport with pallet truck or forklift. Floor clearance 100 mm. Trays with certification Manufacturer's declaration of conformity in accordance with StawaR. Approved for flammable liquids in GHS categories 1 – 3 as well as water hazardous liquids in GHS categories 1 – 4. Made of seamlessly welded 3 mm sheet steel. Trays without certification For storage of non-water hazardous media etc. only – also suitable for the storage of flammable and water hazardous media in countries without approval requirements. Made of seamlessly welded sheet steel, powder coated, blue RAL 5012.

2 3 With drum stand (accessory)

1 1 – 3 For 60 litre drums and small containers Model

Length x width x height Grate Drum capacity Sump capacity with certification powder coated

blue, RAL 5012

hot dip galvanised without certification

powder coated

blue, RAL 5012

800 x 500 x 290 without steel – 2 x 60 l 65 61 116 147-1E 116 150-1E 945.00 1100.00 116 148-1E 116 151-1E 1080.00 1180.00

l Ref. RON Ref. RON Ref. RON

800 x 900 x 220 without steel – 4 x 60 l 68 65 116 152-1E 116 155-1E 1050.00 1230.00 116 153-1E 116 156-1E 1130.00 1330.00 116 164-1E 116 154-1E 825.00 1080.00

800 x 1300 x 205 without steel – 6 x 60 l 84 74 116 158-1E 116 161-1E 1080.00 1350.00 116 159-1E 116 162-1E 1230.00 1550.00 116 160-1E 116 163-1E 895.00 1230.00

Trays with certification Manufacture’s declaration of conformity (ÜHP) in accordance with German construction regulation list A part 1, DIBt, Berlin

6 5 from RON

1050.00

With drum stand (accessory)

4 – 7 For 200 litre drums and small containers 4

Length x width x height Grate Drum capacity Sump capacity with powder coated

l blue, RAL Ref. 5012 RON Ref. RON blue, RAL Ref. 5012

hot dip galvanised without

powder coated

RON

384 www.kaiserkraft.ro

800 x 800 x 465 without steel grate

1200 x 800 x 360 without steel grate

Accessories

1200 x 1200 x 285 without steel grate

1200 x 1200 x 415 without steel grate

– 210 116 166-1E

1 x 200 l 203 116 168-1E

– 224 116 170-1E

2 x 200 l 215 116 174-1E

– 230 117 163-1E

4 x 200 l 216 117 166-1E

– 414 117 169-1E

4 x 200 l 400 117 173-1E

1180.00 116 167-1E 1400.00

1350.00 116 169-1E 1650.00

1230.00 116 171-1E 1500.00 116 172-1E

1380.00 117 160-1E 1850.00 117 162-1E

1230.00 117 164-1E 1500.00 117 165-1E

1800.00 117 167-1E 2050.00 117 168-1E

1750.00 117 171-1E 2050.00 117 172-1E

2200.00 117 174-1E 2500.00 117 175-1E

1050.00

1380.00

1100.00

1600.00

1380.00

1900.00

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

Drum stands For horizontal storage and filling of 60 or 200 litre drums. Powder coated, light grey RAL 7035. Easy self-assembly. For drum capacities Length x width x height Ref. RON

1 x 60 / 200 l 2 x 60 / 200 l mm

600 x 550 x 453

1150 x 550 x 453

117 176-1E 525.00

117 177-1E 775.00

BLUE = Short delivery period

22842

Model

With drum restraint strap (accessory)

8 – c Mobile sump trays 60 and 200 litre drums for transporting, filling and storing in-house • For vertical storage with grate – drum restraint strap as an accessory • For horizontal storage and for filling with grate and drum stand

Sump trays made of 3 mm sheet steel, powder coated or hot dip galvanised, each with push handle. 2 swivel castors and 2 fixed castors, wheel Ø 125 mm. One swivel castor with wheel stop. Otherwise as described on the left hand page.

1430.00

Accessories

Including drum stand

Model

Drum restraint strap To secure standing drums. Ref. 474 436-1E RON 725.00 All trays on this page

Drum capacity Drum storage Sump capacity Max. load Length x width Height without / with push handle light blue RAL 5012 powder coated hot dip galvanised

Manufacture’s declaration of conformity (ÜHP) in accordance with German construction regulation list A part 1, DIBt, Berlin

from RON

l kg mm mm Ref. RON Ref. RON

2 x 60 l upright 61 320 800 x 500 355 / 1080 474 434-1E 1430.00 474 440-1E 1700.00

1 x 60 l horizontal 61 320 800 x 500 355 / 1080 474 444-1E 2050.00 474 445-1E 2200.00

1 x 200 l upright 203 500 800 x 800 615 / 1115 474 433-1E 2650.00 474 439-1E 3150.00

2 x 200 l upright 215 768 1200 x 800 425 / 1115 474 435-1E 3000.00 474 441-1E 3600.00

1 x 200 l horizontal 215 768 1200 x 800 425 / 1115 474 442-1E 3600.00 474 443-1E 4150.00

1 4 x 200 l – 1100 1900 1460 x 1460 x 620 475 141-1E 3750.00 475 142-1E 4500.00

1 – 1 1100 1900 1460 x 1460 x 1083 475 143-1E 4700.00 475 144-1E 5730.00

2 8 x 200 l – 1200 3800 2650 x 1460 x 435 475 145-1E 4900.00 475 146-1E 5630.00

2 4 x 200 l 1 1200 3800 2650 x 1460 x 863 475 147-1E 6380.00 475 148-1E 7130.00

2 – 2 1200 3800 2650 x 1460 x 863 475 149-1E 7130.00 475 150-1E 8630.00

3750.00

ENVIRONMENT

from RON

d – h Steel sump trays for IBC / CTC tank containers

Regulation compliant storage and filling of water hazardous and flammable liquids in tank containers and drums • With zinc plated support grates for storing tank containers, drums and small containers • With zinc plated filling attachment and storage shelf in front – for filling tank containers optimally • Grates and filling attachments can be combined to allow individual positioning of the attachment on the tray

Sump trays with certification made of 3 mm sheet steel, powder coated or hot dip galvanised. As described on the left hand page.

22839

Dimensions per filling attachment Length x width 1250 x 1210 mm. Height at front / rear 430 / 493 mm.

Tank containers can be found on page 331. YELLOW = Ex stock

d Model 1000 l container capacity Drum capacity Filling attachments Sump capacity Max. load Length x width x height powder coated hot dip galvanised

blue, RAL 5012

l kg mm Ref. RON Ref. RON

Telefon 0250 702 110 service@kaiserkraft.ro

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

385

With drum stand (accessory)

4 5

3 from RON

1400.00

Additional accessories can be found on pages 388 and 392.

With castor set (accessory)

★ 5 year guarantee ★ From selected suppliers

Steel sump trays

★ Value for money

For 200 litre drums and small containers • Robust construction • Fork guides for safe transport, clearance height 100 mm, with holes for the attachment of castors • Manufacturers declaration of conformity in accordance with StawaR, approved for flammable liquids in GHS categories 1 – 3 as well as water hazardous liquids in GHS categories 1 – 4

Trays made of 3 mm sheet steel, painted (for colour coding of the stored media) or hot dip galvanised. Can be fitted with castors at a later stage to quickly and conveniently convert to a mobile sump tray (accessory).

Accessories

Ref. 111 676-1E

Model

Length x width x height Grate Drum capacity Sump capacity light blue RAL 5012 painted yellow orange RAL 2000 flame red RAL 3000

l Ref. Ref. Ref. RON Ref. RON

hot dip galvanised

All trays on this page

Castor set 2 swivel castors and 2 fixed castors made of nylon, Ø 180 mm. One swivel castor with wheel stop. Overall height 220 mm.

800 x 800 x 465 without steel – 1 x 200 l 210 203 755 000-1E 909 311-1E 754 999-1E 909 310-1E 741 225-1E 741 234-1E 1400.00 1700.00 741 229-1E 741 238-1E 1750.00 2050.00

RON 925.00

2 1200 x 800 x 360 without steel – 2 x 200 l 224 215 909 302-1E 909 314-1E 909 301-1E 909 313-1E 741 226-1E 741 235-1E 1550.00 1850.00 741 231-1E 741 239-1E 1900.00 2350.00

Manufacture’s declaration of conformity (ÜHP) in accordance with German construction regulation list A part 1, DIBt, Berlin

1800 x 800 x 275 without steel – 3 x 200 l 217 202 111 670-1E 111 674-1E 111 669-1E 111 673-1E 111 668-1E 111 672-1E 2150.00 2750.00 111 671-1E 111 675-1E 2300.00 3100.00

1200 x 1200 x 285 without steel – 4 x 200 l 230 216 909 305-1E 909 317-1E 909 304-1E 909 316-1E 741 227-1E 741 236-1E 1650.00 2250.00 741 232-1E 741 240-1E 1900.00 2750.00

5 2400 x 800 x 250 without steel – 4 x 200 l 241 222 909 308-1E 909 321-1E 909 307-1E 909 320-1E 741 228-1E 741 237-1E 2050.00 2650.00 741 233-1E 741 241-1E 2500.00 3200.00

Pallet sump trays To place on top of Euro or chemical pallets. Model without fork guides – otherwise as described above.

Length x width x height Grate Drum capacity Sump capacity light blue RAL 5012 painted yellow orange RAL 2000 flame red RAL 3000 hot dip galvanised

386 www.kaiserkraft.ro

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

1 mm

l Ref. Ref. Ref. RON Ref. RON

1200 x 800 x 260 without steel – 2 x 200 l 224 215 909 325-1E 909 331-1E 909 324-1E 909 330-1E 909 323-1E 909 329-1E 1600.00 1950.00 909 328-1E 909 333-1E 1950.00 2200.00

2 1200 x 1200 x 185 without steel – 4 x 200 l 230 216 909 337-1E 909 342-1E 909 336-1E 909 341-1E 909 334-1E 909 340-1E 1650.00 2250.00 909 339-1E 909 345-1E 2000.00 2500.00

BLUE = Short delivery period

22843

Model

NEW 3

Steel sump trays with plastic feet For 200 litre drums – also on Euro and chemical pallets

ENVIRONMENT

• Innovative combination: stability of steel – resistance of plastic • PP feet do not corrode – protect against moisture from underneath • Robust, extra large PP feet protect easily damaged corners of the tray and the factory floor (PP feet do not scratch the floor) • Can be picked up by a forklift truck (with adjustable forks) • Can be stacked inside each other (without grate) to save space due to conical construction • Drums can be stored directly on the hot dip galvanised, removable tray grate or on the pallet • TÜV tested, with certification – manufacturer's declaration of conformity in accordance with StawaR Trays made of 3 mm thick sheet steel. Double seamlessly welded seams, leakproof. Powder coated in ultramarine blue RAL 5002 or hot dip galvanised. Extra large, robust screw-on pedestal feet made of black polypropylene (PP). Max. load 850 kg/m².

Manufacture’s declaration of conformity (ÜHP) in accordance with German construction regulation list A part 1, DIBt, Berlin

Model

Length x width Height Grate Drum capacity Pallet capacity

26508

Sump capacity powder coated

mm mm

ultramarine blue RAL 5002

hot dip galvanised

YELLOW = Ex stock

l Ref. RON Ref. RON

1240 x 815 360 without

200 111 696-1E 1750.00 111 698-1E 1950.00

2 1240 x 1210 295 without

steel 2 x 200 l 1 Euro 200 111 697-1E 2050.00 111 699-1E 2200.00

111 777-1E 1800.00 111 779-1E 2000.00

Telefon 0250 702 110 service@kaiserkraft.ro

steel 4 x 200 l 1 chemical

2470 x 815 255 steel 4 x 200 l 2 Euro

2460 x 1210 260 steel 8 x 200 l 3 Euro or 2 chemical

200 111 778-1E 2450.00 111 780-1E 2700.00

220 111 787-1E 3350.00 111 789-1E 3700.00

340 111 792-1E 5000.00 111 794-1E 6130.00

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

387

5 – 7 Large sump trays for

up to 12 x 200 litre drums

With accessories

4 2

2 Manufacture’s declaration of conformity (ÜHP) in accordance with German construction regulation list A part 1, DIBt, Berlin

Steel sump trays For 1 to 12 x 200 litres drums and small containers • P articularly robust and durable due to double sided edge profile • Can be stacked inside each other (without grate) to save space due to conical construction • Fork guides for easy and safe transport with pallet truck or forklift, floor clearance 100 mm

• F or safe, regulation compliant storage and filling of 60 and 200 l drums and small containers • Manufacturers declaration of conformity in accordance with StawaR, approved for flammable liquids in GHS categories 1 – 3 as well as water hazardous liquids in GHS categories 1 – 4

Model Length x width x height Grate Drum capacity Sump capacity painted

yellow orange RAL 2000 flame red RAL 3000 light blue RAL 5012 reseda green RAL 6011

hot dip galvanised

Made of 3 mm sheet steel, painted (in a colour similar to your company colours, or for colour coding of the stored materials) or hot dip galvanised, with or without hot dip galvanised grate.

800 x 800 x 545

1200 x 800 x 415

1200 x 1200 x 335

2400 x 800 x 285

3250 x 1300 x 190 steel 10 x 200 l 240 909 555-1E

3880 x 1300 x 200 steel 12 x 200 l 335 909 557-1E

175 327-1E 175 328-1E 175 333-1E 5130.00 502 319-1E 8230.00

175 329-1E 175 330-1E 175 332-1E 5980.00 502 320-1E 9380.00

l Ref.

without – 229 941 044-1E

steel 1 x 200 l 215 500 542-1E

without – 246 941 053-1E

steel 2 x 200 l 225 782 610-1E

without – 280 941 061-1E

steel 4 x 200 l 245 500 550-1E

without – 280 941 070-1E

steel 4 x 200 l 225 679 305-1E

2650 x 1300 x 210 steel 8 x 200 l 240 855 626-1E

Ref. Ref. Ref. RON Ref. RON

941 045-1E 941 046-1E 941 047-1E 1850.00 941 048-1E 2250.00

941 040-1E 941 041-1E 941 043-1E 1950.00 500 569-1E 2500.00

941 054-1E 941 055-1E 941 056-1E 1950.00 941 057-1E 2300.00

941 049-1E 941 051-1E 941 052-1E 2250.00 782 629-1E 2650.00

941 062-1E 941 063-1E 941 064-1E 2250.00 941 065-1E 2700.00

941 058-1E 941 059-1E 941 060-1E 2750.00 500 577-1E 3100.00

941 071-1E 941 072-1E 941 073-1E 2650.00 941 074-1E 3150.00

941 066-1E 941 067-1E 941 068-1E 3150.00 679 313-1E 3650.00

941 075-1E 941 076-1E 941 078-1E 5230.00 855 634-1E 6730.00

Drum stands For horizontal storage and filling of 60/200 litre drums on sump trays. With support bracket. Supplied flat pack – easy self-assembly. Roller supports Optional, for easy rotation of the drums. 1 pair required for each drum.

388 www.kaiserkraft.ro

Drum capacity Length x width Height Drum stand Roller supports

1 x 60 l

2 x 60 l

3 x 60 l

1 x 200 l

2 x 200 l

355 x 545

755 x 545

1155 x 545

540 x 775

1155 x 775

mm Ref. RON Ref. RON / pair

455 741 246-1E 695.00 741 252-1E 725.00

455 741 247-1E 925.00 741 252-1E 725.00

455 741 249-1E 945.00 741 252-1E 725.00

445 741 250-1E 825.00 741 253-1E 725.00

445 741 251-1E 975.00 741 253-1E 725.00

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

Additional accessories, such as splash protection panels and shelving units for storing small containers and drums, can be found on page 392.

BLUE = Short delivery period

22847

Accessories

Shown with accessories

Mobile steel sump trays

Shown with accessories

For 60 and 200 litre drums

Drum stand as standard

Safe and cost-effective t ransport, filling, storage • Removable zinc plated grate (max. load 1000 kg/m²) • Optionally with zinc plated drum stand for horizontal storage and for dispensing • Drum restraint strap as an accessory to secure upright drums

3 2

Sump tray made of 3 mm sheet steel with push handle. 2 swivel castors and 2 fixed castors made of nylon. One swivel castor with wheel stop. Wheel Ø 100 mm for the 60 litre tray, 180 mm for the 200 litre models.

4 With drum stand as standard.

1 4 from RON

Manufacture’s declaration of conformity (ÜHP) in accordance with German construction regulation list A part 1, DIBt, Berlin

Accessories Drum restraint straps

2050.00

Model

Drum capacity Drum storage Sump capacity Length x width Height without / with push handle painted flame red RAL 3000 light blue RAL 5012

Type hot dip galvanised Ref. RON Ref. RON Ref. RON Ref. RON

2 x 60 litres, upright 200 litres, 1 x upright 200 litres, 2 x upright 200 litres, 3 x upright

111 701-1E 230.00 111 702-1E 230.00 909 356-1E 245.00 111 703-1E 230.00

1 x 200 l upright 203 800 x 800 615 / 1115 909 346-1E 111 624-1E 3450.00 909 347-1E 4650.00

l mm mm Ref. Ref. RON Ref. RON

Drum stand as standard

2 2 x 60 l upright 61 800 x 500 415 / 1080 111 610-1E 111 613-1E 2050.00 111 614-1E 2100.00

3 2 x 200 l upright 215 1200 x 800 510 / 1115 909 348-1E 111 626-1E 3800.00 909 349-1E 4900.00

3 x 200 l upright 202 1800 x 800 430 / 1115 111 629-1E 111 630-1E 3850.00 111 631-1E 4450.00

4 1 x 60 l horizontal 61 800 x 500 415 / 1080 111 618-1E 111 620-1E 2500.00 111 623-1E 2600.00

1 x 200 l horizontal 215 1200 x 800 510 / 1115 909 350-1E 111 632-1E 4450.00 909 352-1E 5380.00

ENVIRONMENT

All trays on this page

Roller supports for drum stand Optional, for easy rotation of the drums. 1 pair required for each drum. Type Ref. RON / pair

60 litres

200 litres

741 252-1E 725.00

741 253-1E 725.00

2 With accessory

Mobile drum sumps For 200 litre drums • Extremely robust and durable • Max. load 1000 kg/m²

Model

Conical shape, reinforced on both sides with edge profiles as a support grate. Otherwise identical to model above.

3 With drum stand as standard.

Drum capacity Drum storage Sump capacity Length x width Height without / with push handle yellow orange RAL 2000 painted light blue RAL 5012

22848

hot dip galvanised

YELLOW = Ex stock

l mm mm Ref. Ref. RON Ref. RON

1 x 200 l upright 215 800 x 800 700 / 1115 673 536-1E 111 633-1E 3850.00 909 353-1E 4600.00

2 x 200 l upright 225 1200 x 800 570 / 1115 673 552-1E 111 638-1E 4200.00 909 355-1E 4850.00

1 x 200 l horizontal 225 1200 x 800 570 / 1115 672 777-1E 111 642-1E 4700.00 672 815-1E 5630.00

Telefon 0250 702 110 service@kaiserkraft.ro

Drum stand as standard

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

389

Low profile steel sump trays Ideal as protection in small areas – can be walked on and driven on with pallet trucks and forklifts • M eets all water protection requirements • Approved for flammable liquids in GHS categories 1 – 3 as well as water hazardous liquids in GHS categories 1 – 4 • Made of 3 mm sheet steel • Includes removable, heavy duty, hot dip galvanised grates • Can be driven on with pallet trucks and forklifts (observe max. load and max. wheel load) • All sections can be combined with each other as needed, spacing between sections 40 mm • Zinc plated for increased protection against corrosion Water hazardous and flammable liquids must be securely stored and handled in accordance with regulations. When refilling, handling, transporting and storing empty containers etc., leaks, splashes and drops must be properly contained. Low profile sump trays are a regulation compliant, cost effective solution.

Applications For placement in areas where empty containers are stored or transported, where transformers are inspected and serviced, and where protection against splashing and leakage is required.

Manufacture’s declaration of conformity (ÜHP) in accordance with German construction regulation list A part 1, DIBt, Berlin

Low profile sump trays with heavy duty grates are available for higher wheel loads. Please enquire. Versions with 210 litre sump capacity are suitable for the storage of 200 litre drums. Large sump trays for storing from 8 to 12 x 200 litre drums can be found on page 388. Length x width

500 x 500

1000 x 500

2000 x 500

2500 x 500

1000 x 1000

2000 x 1000

2500 x 1000

Height Sump capacity Max. wheel load Max. load Ref. RON

mm l kg kg/m²

123 20 450 5000 603 556-1E 1100.00

123 40 450 5000 603 557-1E 1450.00

123 85 450 5000 523 423-1E 2200.00

123 100 450 5000 603 558-1E 2500.00

123 80 450 5000 603 559-1E 2050.00

123 160 450 5000 603 560-1E 3650.00

123 210 450 5000 603 561-1E 3900.00

Accessories, zinc plated Connecting rails, 52 mm wide

Connecting rail

Length Ref. RON

470 603 568-1E 145.00

Edge and cross connectors Type Width x depth Ref. RON

Ramped corner Ramp connector

Width Max. wheel load Ref. RON

390 www.kaiserkraft.ro

1970 603 571-1E 240.00

2470 603 572-1E 325.00

Ramped corners Edge 100 x 30 603 573-1E 160.00

Cross 120 x 120 603 574-1E 290.00

Width x depth Max. wheel load Ref. RON

Ramps, 1150 mm deep The 2450 mm wide ramp is delivered in 2 parts, each 1225 mm.

Edge connector

Loading ramp

970 603 569-1E 210.00

mm kg

1150 x 1150 500 603 567-1E 2050.00

Ramp connectors

450

950

1950

2450

Length x width

90 x 1150

500

Max. wheel load

500

603 563-1E 1300.00

603 564-1E 2050.00

603 565-1E 3400.00

603 566-1E 3700.00

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

Ref. RON

BLUE = Short delivery period

607 021-1E 500.00

22849

Cross connector

Low profile steel sump trays

Related products with 242 litre sump capacity are suitable for the storage of 200 litre drums.

Easily driven over, minimal space required, large trays • Can be easily accessed and driven over with drum trucks, pallet trucks, forklifts etc. due to particularly low overall height of only 78 mm • Minimal space requirement due to narrow ramps (see accessories) • Large footprint – large areas can be covered with only a few trays – and are thus cost effective as well • Approved for flammable liquids in GHS categories 1 – 3 as well as water hazardous liquids in GHS categories 1 – 4 Made of hot dip galvanised 3 mm sheet steel. Includes removable, hot dip galvanised grates. Max. wheel load 500 kg, max. load 5000 kg/m² (distributed load).

General Building Inspection Approval DIBt, Berlin

Accessories

2 Connecting rails Zinc plated, 55 mm wide.

1 Ramps Zinc plated, 500 mm deep, max. wheel load 500 kg.

1 2

Width

3 1 Length x width

1350 x 1350

1900 x 1350

2850 x 1350

2850 x 1900

Height Sump capacity Ref. RON

mm l

78 82 523 523-1E 2850.00

78 118 523 524-1E 3650.00

78 172 523 525-1E 4900.00

78 242 523 527-1E 8380.00

Ref. RON

1350

1900

2850

523 528-1E 1330.00

523 529-1E 1800.00

523 530-1E 2500.00

Length

Ref. RON

1350

1900

2850

523 533-1E 175.00

523 535-1E 190.00

523 536-1E 315.00

3 Ramped corners Zinc plated, width x depth 500 x 500 mm. Max. wheel load 500 kg.

4 Cross connector Zinc plated, Ø 120 mm.

Ref. 523 531-1E RON 1130.00

Ref. 523 532-1E RON 145.00

ENVIRONMENT

Plastic sump trays Highly resistant to corrosive liquids • Robust, durable polyethylene – highly resistant to acids, alkalis, oils etc. • Ideal for lining areas – can be driven on with drum trucks and walked on • Certified for safe storage and dispensing of water hazardous liquids in GHS categories 1 – 4

General Building Inspection Approval DIBt, Berlin

Multiple trays can be combined to completely cover larger areas well. Max. load 800 kg/m² (distributed load).

2 Accessories Connecting element

720 mm 1420 mm 2120 mm

22850

Length x width

Height Sump capacity Grate Ref. RON

mm l

1500 x 800 150 150 125 steel PE 523 537-1E 523 538-1E 2600.00 2800.00

YELLOW = Ex stock

2920 mm

1500 x 1500

2200 x 1500

150 150 220 steel PE 761 713-1E 761 714-1E 3750.00 4500.00

150 150 355 steel PE 523 539-1E 523 540-1E 5380.00 5880.00

3000 x 1500 150 150 400 steel PE 761 715-1E 761 716-1E 6880.00 7380.00

Telefon 0250 702 110 service@kaiserkraft.ro

Edge fastener

Cross connector

Spacer connector

PE loading ramp, L x W x H 900 x 940 x 150 mm

Ref. RON Ref. RON Ref. RON Ref. RON Ref. RON Ref. RON Ref. RON Ref.

523 541-1E 170.00 761 717-1E 190.00 523 543-1E 300.00 761 718-1E 315.00 761 719-1E 175.00 761 720-1E 180.00 983 684-1E 67.00 761 721-1E

RON

2350.00

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

391

Sump trays

Manufacture’s declaration of conformity (ÜHP) in accordance with German construction regulation list A part 1, DIBt, Berlin

For safe dispensing and storage of water hazardous media Made of sheet steel, painted blue RAL 5012 or hot dip galvanised. With zinc plated grate. Manufacturer's declaration of conformity in accordance with StawaR. Other sizes and models on request.

Accessories Splash protection walls, on 3 sides Zinc plated sheet metal, 1.5 mm thick, height 1000 mm. Shelf units, drum stands and roller supports made of zinc plated sheet steel. Shelf units and drum stands are supplied flat pack – easy self-assembly.

Length x width

800 x 800

1200 x 800

1200 x 1200

2400 x 800

1460 x 1460

2650 x 1300

Height Sump capacity Drum capacity 1000 l container capacity painted

mm l

Ref. RON Ref. RON

465 203 1 x 200 l – 909 311-1E 1700.00 741 238-1E 2050.00

360 215 2 x 200 l – 909 314-1E 1850.00 741 239-1E 2350.00

285 216 4 x 200 l – 909 317-1E 2250.00 741 240-1E 2750.00

250 222 4 x 200 l – 909 321-1E 2650.00 741 241-1E 3200.00

620 1000 4 x 200 l 1 909 566-1E 4800.00 603 580-1E 5980.00

435 1000 8 x 200 l 2 909 567-1E 6380.00 603 581-1E 6880.00

Ref. RON

909 575-1E 875.00

909 576-1E 975.00

909 577-1E 1150.00

909 578-1E 1400.00

909 579-1E 1250.00

909 581-1E 1550.00

light blue RAL 5012

hot dip galvanised Accessories Splash protection walls, on 3 sides

Accessories

Model

Length x width Height Ref. RON

mm mm

Shelf unit with 2 Shelf unit with 1 sump shelves drum support 60 l + 1 sump shelf

Shelf unit with 2 drum supports 60 l

608 x 698 900 193 992-1E 795.00

Accessories

Model

drum stand with 1 x 200 l drum support

6 Length x width Height Drum stand

Manufacture’s declaration of conformity (ÜHP) in accordance with German construction regulation list A part 1, DIBt, Berlin

608 x 698 900 909 594-1E 795.00

Roller support

mm mm Ref. RON Ref. RON / pair

608 x 698 900 754 898-1E 795.00

drum stand with 2 x drum stand with 200 l drum supports 3 x 60 l drum supports

540 x 775 445 741 250-1E 825.00 741 253-1E 725.00

1155 x 775 445 741 251-1E 975.00 741 253-1E 725.00

1155 x 545 455 741 249-1E 945.00 741 252-1E 725.00

Sump trays with PE insert For storing corrosive media such as acids, alkalis and oils This product combines the advantages of a steel tray (very sturdy and durable) with the high material resistance of polyethylene. Sump tray made of sheet steel.

Leak-proof welded PE plastic insert with clamp frame and zinc plated mesh grid. Manufacturer's declaration of conformity in accordance with StawaR. Special models and sizes on request.

Length x width

812 x 812

1212 x 812

1212 x 1212

2412 x 812

1472 x 1472

2662 x 1312

Height Sump capacity Drum capacity 1000 l container capacity painted

mm l

468 200 1 x 200 l – 909 582-1E 3900.00 909 588-1E 4000.00

363 200 2 x 200 l – 909 583-1E 4150.00 909 589-1E 4450.00

288 200 4 x 200 l – 909 584-1E 4700.00 909 590-1E 4950.00

253 200 4 x 200 l – 909 585-1E 5980.00 909 591-1E 6480.00

623 1000 – 1 909 586-1E 8480.00 909 592-1E 9630.00

438 1000 – 2 909 587-1E 9880.00 909 593-1E 11250.00

hot dip galvanised

392 www.kaiserkraft.ro

light blue RAL 5012

Ref. RON Ref. RON

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

BLUE = Short delivery period

22851

Custom model

Steel sump trays for IBC / CTC tank containers

Tank containers can be found on page 331.

For the regulation compliant storage and filling of water hazardous and flammable liquids in IBC / CTC containers and drums

Manufacture’s declaration of conformity (ÜHP) in accordance with German construction regulation list A part 1, DIBt, Berlin

• Approved for flammable liquids in GHS categories 1 – 3 as well as water hazardous liquids in GHS categories 1 – 4 • Manufacturers declaration of conformity • Sump tray made of 3 mm sheet steel • With zinc plated support grates for storing drums and IBC / CTC containers, and / or zinc plated filling attachments for easy filling of IBC / CTC containers • Grates and filling attachments can be combined for individual positioning of the filling attachment • Fork guides provide 100 mm clearance height for easy handling with lifting devices

Accessories Splash protection walls, on 3 sides Zinc plated sheet metal, 1.5 mm thick, height 1000 mm.

Sump capacity 1000 litres each Dimensions per filling attachment Length x width x height front / rear 1250 x 1210 x 430 / 493 mm.

ENVIRONMENT

With splash protection walls (accessories)

5 1

Model 1000 l container capacity Drum capacity Filling attachments Length x width x height Max. load painted

yellow orange RAL 2000 light blue RAL 5012

22852

hot dip galvanised Accessories Splash protection walls, on 3 sides

YELLOW = Ex stock

mm kg Ref. Ref. RON Ref. RON

1 4 x 200 l – 1460 x 1460 x 620 1900 603 575-1E 909 566-1E 4800.00 603 580-1E 5980.00

1 – 1 1460 x 1460 x 1083 1900 603 578-1E 941 164-1E 5880.00 603 583-1E 6730.00

2 8 x 200 l – 2650 x 1300 x 435 3800 603 576-1E 909 567-1E 6380.00 603 581-1E 6880.00

2 10 x 200 l – 2690 x 1650 x 375 3800 603 577-1E 941 170-1E 7730.00 603 582-1E 8380.00

2 4 x 200 l 1 2650 x 1460 x 863 3800 941 167-1E 941 168-1E 8730.00 941 169-1E 9730.00

2 – 2 2650 x 1460 x 863 3800 603 579-1E 941 165-1E 9130.00 603 584-1E 10750.00

3 12 x 200 l – 3850 x 1300 x 340 5700 523 395-1E 523 396-1E 12950.00 523 397-1E 12250.00

Ref. RON

909 579-1E 1250.00

909 581-1E 1550.00

523 512-1E 2200.00

909 581-1E 1550.00

523 409-1E 2250.00

Telefon 0250 702 110 service@kaiserkraft.ro

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

393

PE small container universal trays • Highly versatile: for dispensing and transferring liquids, as a workbench sump, car boot sump etc. • Simple, robust, highly resistant tray without grate and certificate of approval • Also suitable for the storage of water hazardous media in countries without approval requirements • Made of 100% recycled PE, ecological – saves resources

Made of recycled polyethylene (“new” PE from production waste) – highly resistant to oils, acids and alkaline solutions. Ribbed base.

Environmentally friendly

1 Model Sump capacity Length x width Height Weight without grate

l mm mm kg Ref. RON

45 1168 x 406 139 1.6 116 048-1E 275.00

75 965 x 660 139 1.6 116 049-1E 325.00

75 1206 x 603 139 2.5 116 051-1E 350.00

87 959 x 867 139 2.7 116 052-1E 365.00

109 1194 x 838 139 3.4 116 053-1E 415.00

from RON

275.00

PE small container pallet trays • Regulation compliant storage and transport of small containers • Trays fit perfectly – even when c ombined – on Euro pallets • Non-slip grate on top • Trays and grates stackable to save space • Trays with grates can also be used as a surface protection system • Approved for water hazardous liquids in GHS categories 1 – 4

5 Polyethylene is highly resistant to oils, acids and alkaline solutions.

Truncated cone grate self-supporting, o ptimal load distribution for a high max. load. (The specified max. loads are a pplicable for evenly distributed loads.)

More sump trays

ONLINE! Model Sump capacity Length x width Height without grate with polyethylene grate

Height Max. load

l mm mm Ref. RON mm kg

25 600 x 400 165 453 405-1E 325.00 178 125

35 800 x 400 165 453 407-1E 365.00 178 160

60 800 x 600 165 453 409-1E 545.00 178 250

120 1200 x 800 165 453 411-1E 675.00 178 500

250 1600 x 1200 165 453 413-1E 1380.00 178 1000

Ref. RON

453 406-1E 645.00

453 408-1E 825.00

453 410-1E 895.00

453 412-1E 1280.00

453 414-1E 2850.00

1–4

General Building Inspection Approval DIBt, Berlin

PE small container pallet trays • Regulation compliant storage of small containers, also suitable for use as an additional tray shelf in cupboards and shelf units • With general certification Made of polyethylene (LDPE) – highly resistant to oils, acids and alkaline solutions. Max. distributed load 50 kg. Approved for water hazardous Model liquids in GHS categories 1 – 4.

with steel grate

394 www.kaiserkraft.ro

l mm mm Ref. RON Ref. RON

30 980 x 600 85 502 445-1E 500.00 502 446-1E 875.00

40 1300 x 620 80 983 693-1E 595.00 983 694-1E 1230.00

General Building Inspection Approval DIBt, Berlin

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

22844

Sump capacity Length x width Height without grate

BLUE = Short delivery period

PE sump trays

For safe storage of water hazardous and corrosive liquids • Extremely robust, made of highly resistant polyethylene • High load capacities for demanding requirements • Removable PE grates

from RON

695.00

Made of 100% recycled PE. Ecological – conserves resources.

1 – 5 Low profile sump trays • Low overall height – can be driven on with drum truck • Can be used individually or as surface protection

PE loading ramp Width x depth x height 1219 x 838 x 159 mm. Max. distributed load 445 kg. Ref. 175 634-1E RON 1200.00

2 6

All items on this page Trays not DIBt approved – only for storage of non water hazardous media etc. In countries without approval requirements, also suitable for storage of water hazardous media.

Ref. 424 805-1E RON 275.00

6 – 7 Sump trays • For 200 litre drums and small c ontainers • Easy to equip with a loading ramp • Accessible from two sides

Model Drum capacity Length x width x height

PE loading ramp for a high 4-drum tray Width x depth x height 1245 x 838 x 267 mm. Max. distributed load 454 kg. Ref. 424 809-1E RON 1500.00

Sump capacity Distributed load Ref. RON

Please observe country-specific regulations (approval, stipulated capacities etc.). Environmentally friendly

1 x 200 l 635 x 635 x 140

2 x 200 l 1245 x 635 x 140

4 x 200 l 1245 x 1245 x 140

6 x 200 l 1854 x 1245 x 140

8 x 200 l 2464 x 1245 x 140

2 x 200 l 1245 x 635 x 457

4 x 200 l 1245 x 1245 x 260

45 567 457 232-1E 695.00

90 1134 424 799-1E 795.00

185 2268 424 800-1E 1380.00

276 3402 424 801-1E 2650.00

371 4536 424 802-1E 3350.00

250 1134 424 807-1E 945.00

276 2268 424 808-1E 1500.00

l kg

QuickBerm® folding trays

from RON

Sump trays for drums, tank containers, tank lorries, etc. which can be driven using a truck, stacker and drum truck • Fast, straightforward use – no assembly required • For indoor and outdoor use • Integrated mechanism keeps tray walls at a 90° position – pressing lightly erects the wall or bends it flat • Safe, leakproof – highly resistant to aggressive media, abrasion and punctures • Folds for space saving and easy transport and storage • Brass eyelets for floor anchoring (floor anchors not included)

22845

Model Length x width x height Sump capacity Weight Ref. RON

mm l kg

3200.00

Extremely robust, PVC coated special tarp reinforced at the corners. Wheel load (when crossing the turned over wall mechanism) max. 5000 kg. Observe the following for tray dimensions Outside 203 mm for supports. Inside 305 mm in entry/exit area for folded-out walls.

1 – 6 QuickBerm® For occasional crossing with vehicles.

7 – 9 QuickBerm®Plus Reinforced, extremely robust special tarps. For frequent crossing with vehicles.

Video

ONLINE!

1800 x 1200 x 305 663 10.43 123 701-1E 3200.00

2400 x 1800 x 305 1344 15.42 123 702-1E 4600.00

3000 x 3000 x 305 2821 25.4 123 703-1E 7130.00

4900 x 3700 x 305 5433 40.37 123 704-1E 10250.00

4900 x 4900 x 305 7232 49.9 123 705-1E 12750.00

6100 x 6100 x 305 11321 70.31 123 707-1E 16950.00

3000 x 2.4 x 305 2253 20.87 123 698-1E 11450.00

8500 x 3.7 x 305 9503 63.5 123 699-1E 28000.00

1650 x 3.7 x 305 18325 114.31 123 700-1E 40000.00

YELLOW = Ex stock

ENVIRONMENT

Connector set For a tight fitting connection of modules. Consisting of 2 steel clamps, 2 rubber spouts, 1 Teflon connection hose.

Telefon 0250 702 110 service@kaiserkraft.ro

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

395

GRP sump trays Made of glass fibre reinforced plastic

Environmentally friendly

• Highly resistant to oils, chemicals (acids and alkaline solutions), emulsions and cleaning agents with pH level up to 8 • Corrosion resistant • Low overall height, easy drum handling

Trays with certification With general certification Z-40.12-227 from the DIBt (German Institute for Construction Technology). For the storage of water hazardous liquids in GHS categories 1 – 4 as well as flammable liquids (flash point > 55 °C).

3 3 1 All trays on this page

Trays without certification Recycled GRP – saves resources. For the storage of non-water-hazardous media. Suitable for the storage of water hazardous and flammable media in countries without approval requirements.

Base sump trays

Accessories

For small containers as well as 60 litre and 200 litre drums • Can be placed directly on the ground

2–5

Loading ramps Sheet steel, zinc plated. Pack of 2.

Without grate, with zinc plated steel grate or with chemical resistant GRP grate. 2 – 5 Can also be combined to cover larger areas.

Ref. 909 381-1E

RON / pack 1100.00

3 Base frame Steel construction, zinc plated.

General Building Inspection Approval DIBt, Berlin

Ref. 722 807-1E RON 845.00 Model

Drum capacity Length x width x height Sump capacity Max. load Certification without grate

mm l kg Ref. RON Ref. RON Ref. RON

steel grate GRP grate

small containers 820 x 420 x 240 65 65 40 40 without with 122 941-1E 915 789-1E 575.00 845.00 122 960-1E 915 790-1E 895.00 1250.00

1 x 200 l 850 x 850 x 390 210 210 400 400 without with 122 945-1E 983 687-1E 975.00 1230.00 122 944-1E 983 688-1E 1380.00 1900.00 122 949-1E 983 689-1E 1900.00 2750.00

Trays with certification

2 x 200 l 1280 x 850 x 270 220 220 800 800 without with 122 957-1E 754 687-1E 825.00 1230.00 122 956-1E 722 805-1E 1300.00 1800.00 122 950-1E 722 806-1E 1950.00 2900.00

3 x 200 l 1880 x 850 x 190 220 220 1200 1200 without with 122 943-1E 754 688-1E 1380.00 1700.00 122 942-1E 754 689-1E 2050.00 2500.00 122 951-1E 909 380-1E 2800.00 4000.00

4 x 200 l 1280 x 1280 x 180 220 220 1300 1300 without with 122 959-1E 754 690-1E 1300.00 1750.00 122 958-1E 754 691-1E 1950.00 2850.00 122 952-1E 754 693-1E 3100.00 4450.00

6 7 6 9 Pallet sump trays

Mobile drum sumps

For small containers and 60 litre and 120 litre drums • Suitable for EURO pallets

For small containers, 60 and 200 litre drums • With certification

For direct placement on floors or on pallets. Bolt-on corner brackets for fastening onto the pallet as an accessory.

7 With rubber locking pins

on the tray floor For secure placement on Euro pallets. Especially for storage in pallet r acking and for transport.

396 www.kaiserkraft.ro

Drum capacity Length x width x height Sump capacity Max. load Certification without grate steel grate Accessories 2 bolt-on corner brackets with bolts

6 x 60 l / 2 x 120 l mm l kg

7 6 x 60 l / 2 x 120 l

Ref. RON Ref. RON

1200 x 800 x 165 150 150 250 250 without with 122 954-1E 681 350-1E 645.00 995.00 122 946-1E 983 685-1E 1100.00 1480.00

Ref. RON

696 889-1E 155.00

6 x 60 l / 2 x 120 l

1200 x 800 x 208 150 150 250 250 without with 122 953-1E 683 094-1E 745.00 1100.00 122 948-1E 983 686-1E 1100.00 1650.00

696 889-1E 155.00

With removable hot dip galvanised steel grate. Hot dip galvanised wheeled base with push handle and crash protection. 2 swivel castors and 2 fixed castors, wheel Ø 125 mm. Model Drum capacity Length x width x height Sump capacity Max. load steel grate

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

1 x 200 l 1090 x 860 x 1080

2 x 200 l 1520 x 860 x 1080

l kg Ref. RON

210 400 983 690-1E 3500.00

220 800 983 692-1E 3600.00

BLUE = Short delivery period

23013

6 Without stop lugs

Model

PE sump trays with PE insert

General Building Inspection Approval DIBt, Berlin

For regulation compliant indoor storage of water hazardous and corrosive liquids • High sump capacity – ideal if increased collection capacities are required, e.g. in water protection areas • Robust and resistant – removable grate

Made of resistant polyethylene.

2 + 3 Can be accessed from two sides with forklift and pallet truck. Please observe forklift pocket dimensions.

Model Drum capacity Length x width x height Sump capacity Max. load Forklift pockets A / B x C with PE grate

mm l kg Ref. RON

1 x 200 l 900 x 700 x 525 225 300 – 117 193-1E 1700.00

2 x 200 l 1220 x 820 x 330 240 600 230 / 225 x 95 117 194-1E 1650.00

4 x 200 l 1310 x 1310 x 370 410 1250 150 / 205 x 90 117 195-1E 2700.00

3 Forklift pockets (see table for internal dims.)

PE storage and filling stations For safe storage, filling, transport of aggressive and water hazardous media

3 Canister/drum filling stand

• • • •

For safe filling of horizontal small containers and 60/200 litre drums • For canisters or drums – simply rotate by 180°

For 2 x 200 litre horizontal drums Integrated 400 litre sump tray Robust, durable construction Accessible from 2 sides

L x W x H 875 x 765 x 730 mm.

L x W x H 1390 x 1250 x 490 mm. Max. load 1250 kg (distributed load). Forklift pockets (A/B/C) 370/280/80 mm.

2 2

ENVIRONMENT

1 Drum filling station

Ref. 456 061-1E RON 745.00

4 Environmental/chemicals trolley

Ref. 456 059-1E RON 2050.00

2 Drum pallet • For 2 x 200 l horizontal steel drums, max. 2 can be stacked • Versatile – can be attached to a filling station or as a drum stand on sump trays • Accessible from 2 sides

Ideal for maintenance tasks, handling and in-house transport • Flexible and versatile • Integrated sump trays (working/storage platform, base sump tray)

LxWxH 1240 x 795 x 370 mm. Max. load 600 kg (distributed load). Forklift slots (A/B/C) 670/175/195 mm.

1 removable sump shelf (max. load 15 kg with distributed load). 1 door with cylinder lock (2 keys), 2 fixed castors, 2 swivel castors with wheel stops. Total max. load 65 kg. L x W x H 725 x 640 x 1075 mm.

Ref. 456 060-1E RON 995.00

Ref. 456 062-1E RON 2700.00

3 Forklift pockets (see text for internal dims.)

Drum and small container dollies

General Building Inspection Approval DIBt, Berlin

Made of polyethylene (PE) • Suitable for 200 litre steel and plastic drums • For corrosive liquids, batteries etc. • ntegrated 30 litre sump tray Max. load 300 kg. Sump tray internal Ø 645 mm. 4 swivel castors, 2 with wheel stops. Wheel Ø 100 mm.

Drum transport and filling trolleys

23015

Made of polyethylene (PE) Type

without handle

with handle

Length x width x height mm

725 x 725 x 255

725 x 725 x 990

117 197-1E 1350.00

117 198-1E 1650.00

Ref. RON

YELLOW = Ex stock

• Safely pick-up, transport, fill and store 200 litre drums • Integrated 230 litre sump tray • Two restraint straps to secure drum

Telefon 0250 702 110 service@kaiserkraft.ro

Max. load 300 kg. Length x width x height 1600 x 740 x 640 mm. Ref. 117 199-1E RON 2950.00

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

397

All sump trays on this page

General Building Inspection Approval DIBt, Berlin

5 4 3

PE sump trays with PE grate

For regulation compliant indoor storage, handling and transport of aggressive and water hazardous liquids in GHS categories 1 – 4 • M ade entirely of polyethylene – highly resistant to oils, acids, alkaline solutions etc. • Removable PE grates • Robust, durable construction • With general certification from the DIBt (German Institute for C onstruction Technology)

from RON

240.00

1 – 5 Small containers and

Model

• T rays fit perfectly – even when combined – on Euro pallets • Stackable to save space (without grate)

Length x width Height Sump capacity Max. load without grate

pallet trays

with PE grate

mm mm l kg Ref. RON Ref. RON

600 x 400 170 20 55 116 054-1E 240.00 116 055-1E 695.00

800 x 400 170 30 55 116 056-1E 375.00 116 057-1E 775.00

800 x 600 170 40 105 116 058-1E 415.00 116 059-1E 825.00

1000 x 600 200 60 205 116 060-1E 645.00 116 061-1E 995.00

1200 x 800 185 100 205 117 190-1E 795.00 117 191-1E 1250.00

General Building Inspection Approval DIBt, Berlin

6 Floor / pallet sump

from RON

725.00

8 7

Mobile, with push handle

With 4 feet, clearance for forklift

6 – 8 Trays for 60 l drums and small containers

Model

• F or storage of small containers, 50 and 60 litre drums directly in the tray or on the PE grate • For safe storage and on-site transport of water hazardous and corrosive fluids

6 For placement on the ground or

Design

7 With 4 feet

Length x width Height Sump capacity Max. load without grate

on a pallet

Extremely sturdy – tray and feet manufactured in one piece. Clearance for forklift, feet at intervals of 290 or 595 mm, 105 mm clearance height.

8 Mobile

With 4 castors, wheel Ø 50 mm, and metal push handle.

398 www.kaiserkraft.ro

mm mm l kg Drum capacity Ref. RON

with PE grate

Drum capacity

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

Ref. RON

floor / pallet sump tray 811 x 605 211 66 150 1 x 60 l 175 694-1E 725.00 2 x 60 l 175 693-1E 945.00

4 feet

mobile

811 x 605 306 70 150 1 x 60 l

811 x 605 340 / 958 66 150 1 x 60 l

2 x 60 l 175 697-1E 1130.00

2 x 60 l 175 695-1E 1380.00

BLUE = Short delivery period

23025

9 – b Sump trays • For the storage and filling of small containers, 60 and 200 litre drums, batteries etc. • Low overall height – only 150 mm – can be driven on with drum truck • Can be used individually or as surface protection

from RON

1100.00

Accessories PE loading ramp Length x width x height 650 x 800 x 165 mm.

Model Length x width x height Drum capacity Sump capacity Max. load without grate with PE grate Accessories PE loading ramp

With PE loading ramp (accessory)

l kg Ref. RON Ref. RON

1260 x 860 x 150 6 x 60 l 150 1000 116 062-1E 1100.00 116 063-1E 1800.00

1660 x 1260 x 150 4 x 200 l / 12 x 60 l 300 2000 116 064-1E 1230.00 116 065-1E 2650.00

2610 x 895 x 150 4 x 200 l / 12 x 60 l 300 2000 116 066-1E 2100.00 116 067-1E 3350.00

Ref. RON

116 073-1E 1080.00

9 All sump trays on this page

c – d Sump trays for 2 or • Can be accessed from four sides with forklift and pallet truck • Drums can be stored directly on grate or on pallets • Grate with handle recesses for easy handling • Stackable to save space (without grate)

from RON

General Building Inspection Approval DIBt, Berlin

1400.00

ENVIRONMENT

4 drums

c Model Length x width x height Drum capacity Sump capacity Max. load Forklift pockets A / B x C with PE grate

mm l kg mm Ref. RON

1222 x 817 x 450 2 x 200 l 230 680 190 / 175 x 96 116 069-1E 1400.00

1220 x 1220 x 390 4 x 200 l 250 1365 190 / 175 x 96 116 070-1E 2150.00

Forklift pockets (see table for internal dims.)

e – f Sump trays for IBC/CTC

tank containersLarge surface for easy positioning of containers

from RON

• Can be accessed from two sides with forklift and pallet truck

6630.00

Accessories Detachable PE filling container Collect drips, holds containers. Capacity 86 litres.

Model Length x width x height 1000 l container capacity Sump capacity Max. load Forklift pockets A / B x C with PE grate

mm l kg mm Ref. RON

23023

Accessories Detachable PE filling container Ref. RON

YELLOW = Ex stock

1760 x 1350 x 710 1 1100 2000 165 / 250 x 90 116 071-1E 6630.00

2560 x 1350 x 510 2 1140 4000 495 / 165 x 95 116 072-1E 7230.00

175 689-1E 895.00

175 690-1E 745.00

i With detachable PE filling container (accessory)

More sump trays

ONLINE! Forklift pockets (see table for internal dims.)

Telefon 0250 702 110 service@kaiserkraft.ro

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

399

PE sump trays

All sump trays on this page

Safe storage and in-house transport of aggressive and water hazardous liquids in GHS categories 1 – 4

General Building Inspection Approval DIBt, Berlin

For 60 litre drums

• Highly resistant to oils, acids and alkaline solutions • Made of light, weatherproof, sturdy and durable polyethylene • With general certification from the DIBt (German Institute for Construction Technology)

Sump capacity 60 litres For direct storage of one 60 litre container or small containers. With grate for two 60 litre containers.

1 Floor/pallet trays

To place directly on the floor or on Euro pallets. Max. load (distributed load) 150 kg. 2 With four feet For positioning a pallet truck or forklift underneath. Max. load (distributed load) 150 kg. 3 Mobile sump trays With push handle, 4 swivel castors. Max. load (distributed load) 120 kg.

Accessories

4 2 in 1 PE drum stand Variable usage for 60 and 200 litre drums – simply turn 180°. Ref. 754 734-1E

RON 645.00

1 3

2 Model

Design Length x width x height Grate Drum capacity Ref. RON

mm without 1 x 60 l 754 731-1E 795.00

as a tray 725 x 525 x 235 steel 2 x 60 l 754 732-1E 1180.00

PE 2 x 60 l 754 733-1E 1230.00

without 1 x 60 l 909 735-1E 1130.00

with 4 feet 725 x 525 x 320 steel 2 x 60 l 909 736-1E 1450.00

from RON

3 PE 2 x 60 l 909 737-1E 1550.00

without 1 x 60 l 909 738-1E 1450.00

mobile 725 x 525 x 330 steel 2 x 60 l 909 739-1E 1800.00

PE 2 x 60 l 909 740-1E 1900.00

For 2 x 200 litre drums

1100.00

Collection capacity 217 litres • Drums can be stored directly on the sump tray grate or on pallets • Low overall height for easy drum handling • With general certification from the DIBt (German Institute for Construction Technology) Robust construction, manufactured with seamless injection moulding process.

With zinc plated grate

5 Trays with fork clearance

Can be accessed from four sides with forklift or pallet truck.

With PE grate

6 Mobile trays

With push handle, 2 swivel castors and 2 fixed castors each.

5 Forklift pockets (see table for internal dims.)

With zinc plated grate General Building Inspection Approval DIBt, Berlin

Design Length x width x height Distributed load Grate Drum capacity Forklift pockets A / B x C Ref. RON

400 www.kaiserkraft.ro

5 mm kg/m² without 1 x 200 l 194 / 181 x 90 118 456-1E 1100.00

clearance for forklift 1245 x 865 x 350 760 steel 2 x 200 l 194 / 181 x 90 118 457-1E 1450.00

PE 2 x 200 l 194 / 181 x 90 118 458-1E 1900.00

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

without 1 x 200 l

mobile 1245 x 865 x 1060 620 steel 2 x 200 l

PE 2 x 200 l

118 459-1E 2300.00

118 461-1E 2900.00

118 462-1E 3250.00

BLUE = Short delivery period

23024

Model

PE sump trays for 200 litre drums

All sump trays on this page

Made of highly resistant, robust and durable polyethylene – ideal for storing corrosive media such as acids, alkaline solutions, oils

General Building Inspection Approval DIBt, Berlin

For 2 drums – Euro pallet size Sump capacity without grate 250 litres / with grate 224 litres • Standard pallet collars can be attached • With general certification

1 Floor / pallet sump tray

Made of particularly robust polyethylene (HDPE). Max. load 600 kg (distributed load).

2 With four feet

Without grate for 1 x 200 litre drum or small containers. With grate for 2 x 200 litre, 6 x 60 litre drums or small containers.

3 With runners

1600.00

RON Nr. 516 631-1E

To place directly on the floor or on Euro pallets.

Robust runner base. Accessible from four sides with a stacker (runner pockets 300 x 80 mm), accessible from two sides with a pallet truck (feet at intervals of 520 mm). For direct placement in pallet racking.

80 5m m

Accessible from four sides, feet at intervals of 520 or 760 mm.

1205 mm

4 Mobile sump tray

Suitable for Euro pallets

Model Design Length x width x height

floor / pallet sump tray 1205 x 805 1205 x 805 1205 x 805 x 340 x 340 x 340 without steel PE 1 x 200 l 2 x 200 l 2 x 200 l 116 096-1E 116 097-1E 116 098-1E 995.00 1430.00 1700.00

Grate Drum capacity Ref. RON

For 4 drums

Collection capacity 285 litres • Low overall height for easy drum handling • Can be accessed with a forklift from four sides • With general certification

from RON

ENVIRONMENT

With push handle. Loading height 490 mm. 2 swivel castors and 2 fixed castors, wheel Ø 125 mm.

1205 x 805 x 440 without 1 x 200 l 116 099-1E 1100.00

with 4 feet 1205 x 805 x 440 steel 2 x 200 l 116 100-1E 1500.00

1205 x 805 x 440 PE 2 x 200 l 116 101-1E 1850.00

1205 x 805 x 440 without 1 x 200 l 516 630-1E 1180.00

with runners 1205 x 805 x 440 steel 2 x 200 l 516 631-1E 1600.00

mobile 1290 x 805 x 490 / 1040 steel 2 x 200 l 116 103-1E 2700.00

1205 x 805 x 440 PE 2 x 200 l 516 632-1E 2150.00

1290 x 805 x 490 / 1040 without 1 x 200 l 116 102-1E 2200.00

1290 x 805 x 490 / 1040 PE 2 x 200 l 116 104-1E 2900.00

More sump trays

1700.00

ONLINE!

Robust construction, manufactured with seamless PE injection moulding process. Max. load 950 kg/m² (distributed load).

With zinc plated grate

23026

Model Length x width x height Grate Drum capacity Forklift pockets A / B x C Ref. RON

5 mm without 1 x 200 l mm 116 105-1E 1700.00

YELLOW = Ex stock

1220 x 1230 x 220 steel 4 x 200 l 240/310 / 175 x 90 116 107-1E 2150.00

PE 4 x 200 l

Forklift pockets (see table for internal dims.)

116 108-1E 2400.00

Telefon 0250 702 110 service@kaiserkraft.ro

With PE grate

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

401

PE sump trays for IBC/CTC tank containers

NEW from RON

With cross brace or grate as storage area

3800.00

• For indoor storage of corrosive and water hazardous liquids in IBC/CTC tank containers in accordance with regulations • With storage area for placing the tank containers easily and safely • Made of high quality polyethylene (LDPE), highly resistant to corrosive media, acids, alkalis, oils, etc. • With general certification from the DIBt (German Institute for Construction Technology), Berlin (Z-40.22-564) • Can be accessed from two sides with a forklift and manual pallet truck (transport only possible when empty – without IBC/ CTC) • Can be stacked – for transport or storage (without cross brace / grate)

Tank containers can be placed directly on the integrated cross brace or either on the steel grate or the PE perforated panel. Sump capacity 1100 litres. High max. load and resilience due to an integrated, sturdy PE cross brace – the weight is transferred directly onto the floor. Max. load 1500 kg per storage space. The cross brace is supplied partly assembled – easy self-assembly.

1 For 1 x IBC/CTC 2 For 1 x IBC/CTC with integrated filling attachment

Catches any leaks or splashed liquids, containers can be set down.

3 For 2 x IBC/CTC

2 2

With steel grate

Integrated filling attachment

General Building Inspection Approval DIBt, Berlin

With PE cross brace

Model

Design

Length x width x height

With PE perforated panel

with PE cross brace

1000 l container capacity Ref. RON

402 www.kaiserkraft.ro

With PE cross brace

With PE perforated panel

with steel grating, with PE perforated zinc plated panel

with PE cross brace

with steel grating, with PE perforated zinc plated panel

with PE cross brace

with steel grating, with PE perforated zinc plated panel

1460 x 1170 x 850

1460 x 1170 x 870

1460 x 1170 x 880

1620 x 1170 x 850

1620 x 1170 x 870

1620 x 1170 x 880

2230 x 1460 x 440

2230 x 1460 x 460

2230 x 1460 x 470

529 516-1E 3800.00

529 517-1E 4350.00

529 518-1E 4350.00

529 519-1E 3900.00

529 520-1E 4450.00

529 521-1E 4450.00

529 522-1E 6130.00

529 523-1E 7230.00

529 524-1E 7230.00

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

BLUE = Short delivery period

23594

PE sump trays for tank containers Safe storage and filling of water hazardous liquids (GHS categories 1 – 4) in CTC and IBC containers • Made of sturdy, weatherproof and durable polyethylene • Resistant to oils, acids and alkaline solutions • Manufacturers declaration of conformity and general certification from the DIBt (German Institute for Construction Technology), Berlin

1 + 2 IBC and CTC stations Sump capacity 1000 litres • Integrated forklift pockets – can be moved with pallet truck or forklift

1 With PE support grate

Max. load 2000 kg/position (evenly distributed load).

Model 1000 l container capacity Length x width x height

mm Ref. RON Ref. RON

without PE support grate with PE support grate

1 1430 x 1430 x 965

2 2260 x 1430 x 720 516 512-1E 8880.00 516 513-1E 9230.00

516 510-1E 5380.00

Without PE support grate

from RON

5380.00

With PE support grate

3 + 4 Tank container stations

ENVIRONMENT

1000 or 1100 litre sump capacity • Storage platform with raised edge for secure positioning of the container Max. load 2000 kg/position.

4 With an integrated support grate for use when dispensing.

Model Design

Sump capacity Length x width x height

l mm

Ref. RON

with storage platform

with storage platform and support grate

1000 1380 x 1580 x 760

1100 1380 x 1800 x 760

927 831-1E 6380.00

927 832-1E 6730.00

Collection capacity 1000 litres

Collection capacity 1100 litres

5 + 6 Storage and filling stations for tank containers

Sump capacity 1000 litres • Ideal for filling and dispensing • With grate, zinc plated or made of PE Max. load 2000 kg/position.

Model 1000 l container capacity Length x width x height steel grate, zinc-plated PE grate

mm Ref. RON Ref. RON

1 1760 x 1410 x 660 761 274-1E 8630.00 761 275-1E 10250.00

2 2480 x 1410 x 490 761 271-1E 10250.00 761 272-1E 13250.00

6 All items on this page

23029

Accessories

Ref. RON

Drainage extension Ø 60 mm

YELLOW = Ex stock

909 743-1E 200.00

Telefon 0250 702 110 service@kaiserkraft.ro

General Building Inspection Approval DIBt, Berlin

Tank containers can be found on page 331.

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

403

Drum sump trays for transport and storage

Manufacture’s declaration of conformity (ÜHP) in accordance with German construction regulation list A part 1, DIBt, Berlin

• Sturdy steel frame construction with forklift for pallet trucks and forklifts • TÜV/MPA tested • Manufacturers declaration of conformity in accordance with StawaR, approved for flammable liquids in GHS categories 1 – 3 as well as water hazardous liquids in GHS categories 1 – 4 Welded steel sump tray with frame. Trays made of 3 mm sheet steel, sump capacity 205 litres. Removable, zinc plated grates. Including absorbent agent emergency spill kit and hazardous goods stickers.

Four versions Not stackable, open steel frame, for 2 x 200 litre drums

– Not stackable for individual installation – Stackable – up to 3 units can be stacked to save space – Open rear and side steel frame (transparency) – Closed rear and side walls (splash protection, etc.)

Stackable, open steel frame, for 4 x 200 litre drums with accessory protection bar

Accessories Pivoting protection bar For protection during transport, zinc plated.

More trays and accessories

ONLINE!

Ref. 453 373-1E RON 300.00

Stackable

Drum capacity Length x width x height Max. load open rear and side steel frame

ultramarine blue RAL 5002 zinc plated

closed rear and side walls

ultramarine blue RAL 5002 zinc plated

General Building Inspection Approval DIBt, Berlin

Lower grates shown are an accessory, please include with your order.

1 – 2 For 60 litre drums

and / or small containers

23030

With highly resistant GRP sump tray

3 – 4 For up to 6 x 60 litre drums and small containers

Height x width x depth

Ref.

RON

3 with 2 grates and drum supports 4 with 3 grates and drum supports

1 with 2 drum supports 2 with 2 grate supports

mm 1310 x 820 x 450 1310 x 820 x 450

722 800-1E 909 713-1E

1900.00 2400.00

Accessories Zinc plated tray grate, for 65 litre sump tray

30 x 420 x 800

909 712-1E

490.00

Accessories Steel grate as a 3rd or 4th shelf Edge rail (4 part), zinc plated, to secure small containers

722 799-1E

220.00

Container support, zinc plated

404 www.kaiserkraft.ro

4 x 200 l 1390 x 1310 x 1380 1400 453 376-1E 3850.00 453 377-1E 4350.00 453 388-1E 4800.00 453 389-1E 5230.00

Drum and small container shelving units

Drum shelf unit with GRP sump tray, capacity 150 litres

Drum shelf unit with GRP sump tray, capacity 65 litres

2 x 200 l 1390 x 900 x 1440 935 453 374-1E 3250.00 453 375-1E 3700.00 453 386-1E 4250.00 453 387-1E 4600.00

• Regulation compliant, space saving storage and filling of 60 litre drums and small containers over the protruding GRP sump tray • GRP sump tray – highly resistant to used oil, acids, alkaline solutions etc. • Sturdy, hot dip galvanised tubular steel frame – easy assembly • Also approved for flammable liquids (flash point > 55 °C)

4 x 200 l 1355 x 1270 x 870 1400 453 382-1E 3900.00 453 383-1E 4250.00

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

Height x width x depth mm 1300 x 1320 x 800 2000 x 1320 x 800 30 x 1300 x 620

Ref.

RON

722 798-1E 983 695-1E

3650.00 3950.00

754 791-1E 709 016-1E

695.00 315.00

722 799-1E

220.00

BLUE = Short delivery period

23030

For 2 x 200 litre drums, up to 3 units can be stacked

2 x 200 l 1355 x 865 x 935 935 453 380-1E 3100.00 453 381-1E 3100.00

mm kg Ref. RON Ref. RON Ref. RON Ref. RON

yes

Hazardous goods shelving for small containers For safe indoor storage and filling of water hazardous and flammable media • With certification – manufacturer's declaration of conformity in accordance with StawaR • Can be expanded as needed – simple plug-in assembly • Sturdy construction • Shelf levels height adjustable in 25 mm increments • Max. load per shelf level 130 kg, with evenly distributed load • All shelf unit components, tray shelves and mesh shelves made of zinc plated sheet steel

1 For water hazardous,

non-flammable media

With accessory

Model

Regulation compliant storage of water hazardous and non-flammable media in GHS categories 1 – 4.

Sump shelves in each storage level offer increased p rotection for the storage of water hazardous media.

2 – 4 For flammable and

water hazardous media

For regulation compliant storage of flammable liquids in GHS categories 1 – 3 as well as water hazardous liquids in GHS categories 1 – 4.

2 With mesh shelves and a central sump shelf • 30 or 35 litre sump capacity each 3 + 4 With mesh shelves and a central sump tray • Sump capacity 210 litres • Particularly high storage capacity • Clearance height 100 mm • Grate extends beyond front edge of the shelf unit for safe filling and dispensing

Width Number of sump trays Sump capacity Number of mesh shelves standard unit

Height x width x depth

extension unit

Height x width x depth

l mm Ref. RON mm Ref. RON

Accessories Additional mesh shelf

Ref. RON Ref. RON Ref. RON

Additional sump shelf PE insert tray, to place in the sump shelf

1000 1300 1000 1300 4 4 1 1 30 35 30 35 – – 3 3 2000 x 1060 x 635 2000 x 1360 x 635 2000 x 1060 x 635 2000 x 1360 x 635 604 620-1E 175 335-1E 604 625-1E 175 334-1E 3150.00 3150.00 2250.00 2450.00 2000 x 1010 x 635 2000 x 1310 x 635 2000 x 1010 x 635 2000 x 1310 x 635 604 621-1E 175 336-1E 604 626-1E 175 338-1E 2850.00 2850.00 2000.00 2200.00

604 622-1E 545.00 709 657-1E 425.00

175 337-1E 500.00 175 341-1E 575.00

604 627-1E 325.00

175 339-1E 340.00

709 657-1E 425.00

175 341-1E 575.00

Sump tray made of 3 mm sheet steel, painted in sky blue RAL 5015 or hot dip galvanised, with forklift pockets.

Model

ENVIRONMENT

With sump shelves • 30 or 35 litre sump capacity each

With accessory

All items on this page Manufacture’s declaration of conformity (ÜHP) in accordance with German construction regulation list A part 1, DIBt, Berlin

PE insert trays

Shelf unit type

standard unit

To place in the tray shelves. For storage of corrosive media such as acids, alkaline solutions etc. HDPE, black. Collection capacity 30 litres Length x width x height 995 x 595 x 85 mm. Collection capacity 35 litres Length x width x height 1295 x 595 x 85 mm.

Number of mesh shelves Height x width x depth Tray dimensions Tray colour sky blue RAL 5015 hot dip galvanised

23031

Accessories Additional mesh shelf

YELLOW = Ex stock

mm mm

4 2000 x 1060 x 635 1250 x 820

standard unit + extension unit 2x4 2000 x 2085 x 635 2420 x 820

Ref. RON Ref. RON

604 629-1E 3350.00 604 630-1E 3600.00

604 633-1E 5730.00 604 634-1E 6130.00

Ref. RON

604 627-1E 325.00

Telefon 0250 702 110 service@kaiserkraft.ro

Information on government regulations can be found on page 382.

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

405

Drum and small container shelving units

For safe, combined storage and filling of horizontal 60 and 200 litre drums and small containers in indoor areas • Available in two sizes • Robust stacking frame with forklift pockets for optimum handling • Approved for flammable liquids in GHS categories 1 – 3 as well as water hazardous liquids in GHS categories 1 – 4

Stacking frames Stable, hot dip galvanised construction. Fork guides, max. load 500 kg. Can be stacked up to 2 storage levels. Frames of the same size can be combined. As a small container frame with grate or as a drum frame with drum supports, for 60 or 200 litre drums. Supplied flat pack – easy self-assembly.

Sump trays

Collection capacity 200 litres. Made of 3 mm sheet steel. Clearance height 100 mm. Small container frame

Stacking frames

Height x width x depth Drum capacity

780 x 910 x 790 small containers 523 545-1E 1800.00

Ref. RON Sump trays Length x width x height Grate painted

2 1 x 200 l

small containers

523 544-1E 1750.00

523 547-1E 2100.00

523 548-1E 2150.00

1 mm light blue RAL 5012

hot dip galvanised

Ref. RON Ref. RON

All items on this page

780 x 1310 x 800 3 x 60 l

1200 x 800 x 360 without steel 909 302-1E 909 314-1E 1550.00 1850.00 741 231-1E 741 239-1E 1900.00 2350.00

2 x 200 l 523 546-1E 2000.00

2 1200 x 1200 x 285 without steel 909 305-1E 909 317-1E 1650.00 2250.00 741 232-1E 741 240-1E 1900.00 2750.00

Manufacture’s declaration of conformity (ÜHP) in accordance with German construction regulation list A part 1, DIBt, Berlin

Accessories for all shelving units on this page Roller support

741 252-1E 725.00 741 253-1E 725.00 523 496-1E 465.00

Ref. RON / pair Ref. RON / pair Ref. RON

For 60 litre drums For 200 litre drums

Hook-on bucket holder

Drum stands Drum pushthrough stop

For indoor storage of 60 and 200 litre drums Sump trays

• Available in two sizes • Variable, expandable drum shelving for regulation compliant storage and dispensing • Trays and stacking frames with forklift pockets for optimum handling

Painted or hot dip galvanised.

Stacking frames For 1 to 3 drums. With crane eyelets, hot dip galvanised. Can be stacked up to 3 storage levels. Suitable drum push-through stop Ref. 523 526-1E RON 325.00

Height x width x depth Drum capacity Ref. RON

1 mm

Sump trays

23032

406 www.kaiserkraft.ro

Length x width x height Grate yellow orange RAL 2000 painted hot dip galvanised

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

mm Ref. RON Ref. RON

850 x 980 x 580 1 x 200 l 909 528-1E 2050.00

850 x 1380 x 580 2 x 200 l 3 x 60 l 523 380-1E 523 429-1E 2600.00 2850.00

1200 x 800 x 415 without steel 941 053-1E 782 610-1E 1950.00 2250.00 941 057-1E 782 629-1E 2300.00 2650.00

1200 x 1200 x 335 without steel 941 061-1E 500 550-1E 2250.00 2750.00 941 065-1E 500 577-1E 2700.00 3100.00

BLUE = Short delivery period

23032

Stacking frames

Shelf sump trays For regulation compliant indoor s torage of drums, IBC/CTC containers and small containers on pallets etc.

1 Shelf sump trays

You can quickly and economically convert existing shelving systems into regulation compliant hazardous goods storage with these shelf sump trays.

For placement on the cross beams or suspension in the shelf unit. Distance between cross beams 915 mm. • Approved for water hazardous liquids • With zinc plated grate, max. load 1000 kg/m² (evenly distributed load) • Collection capacity 200 litres

Manufacture’s declaration of conformity (ÜHP) in accordance with German construction regulation list A part 1, DIBt, Berlin

Length Width Height painted

made of sheet steel

yellow orange RAL 2000 light blue RAL 5012

• Robust 3 mm sheet metal construction

hot dip galvanised

2150 1250 140 523 465-1E

2650 1250 130 523 469-1E

Ref. RON Ref. RON

523 467-1E 4250.00 523 468-1E 4600.00

523 472-1E 4850.00 523 473-1E 5480.00

2 Base sump trays For positioning under shelving systems. • Approved for flammable and water hazardous liquids • 100 mm clearance height for easy handling with lifting devices • With or without zinc plated grate, max. load 1000 kg/m² (evenly distributed load)

2 Length x width x height

Sump capacity Grate painted yellow orange RAL 2000 light blue RAL 5012

Please enquire about other sizes and colours.

2 1

hot dip galvanised

2150 x 1300 x 225

2150 x 1300 x 505

2650 x 1300 x 210

2650 x 1300 x 435

Ref.

240 without steel 523 433-1E 523 438-1E

1000 without steel 523 442-1E 523 447-1E

240 without steel 523 474-1E 523 478-1E

1000 without steel 523 451-1E 523 456-1E

Ref. RON Ref. RON

523 435-1E 3900.00 523 436-1E 4350.00

523 444-1E 4000.00 523 446-1E 4450.00

523 476-1E 3950.00 523 477-1E 4650.00

523 454-1E 4900.00 523 455-1E 5980.00

523 440-1E 5230.00 523 441-1E 5730.00

523 449-1E 5230.00 523 450-1E 5880.00

523 480-1E 5630.00 523 481-1E 6230.00

523 458-1E 6630.00 523 459-1E 7380.00

+ 4 Shelf sump trays made of polyethylene

ENVIRONMENT

1 + 2 Shelf sump trays

mm mm mm Ref.

• Robust and highly resistant to many corrosive chemicals • Suitable for all standard shelf widths and standard shelving systems

3 Base sump trays For positioning under shelving systems. • With general certification from the DIBt (German Institute for Construction Technology) • Clearance height 100 mm for transport and placement under shelf units with lifting devices Length x width Height Sump capacity Ref. RON

mm mm l

1390 x 1320 315 315 715 032-1E 2600.00

1780 x 1320 315 400 715 033-1E 2750.00

4 Shelf sump trays

23034

For placement on the cross beams or suspension in the shelf unit. • Collection capacity 220 litres. • Approved for water hazardous liquids • Complete with grate

Length x width Height Grate Max. load Ref. RON

mm mm kg/m²

YELLOW = Ex stock

Pallet racking can be found on pages 250 – 253.

2180 x 1320 315 480 715 317-1E 3400.00

2680 x 1320 315 600 715 318-1E 4650.00

2680 x 1320 490 1100 715 319-1E 5000.00

Table information

With steel grate

Distance between cross beams 900 mm. Max. load of PE grates – 1000 kg/m² for pallets with containers on the grate – 100 kg/m² for containers directly on the grate

1780 x 1300 / 900 / N/A 240 250 steel PE 1000 1000 / 100 715 320-1E 715 321-1E 3100.00 3150.00

2680 x 1300 / 900 / N/A 180 180 steel PE 1000 1000 / 100 715 333-1E 715 334-1E 3800.00 3850.00

Telefon 0250 702 110 service@kaiserkraft.ro

With PE mesh grid

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

407

UNI and MULTI tanks

For storing new and used oil, heating oil and diesel • For new and used oil, diesel / heating oil, UNI – storage tank flash point > 55 °C • Also approved for use in water p rotection zones and buildings without sump tray (observe country specific laws) • Low overall height – no steps required when filling (up to 1000 litres) • Integrated, zinc plated sheet steel sump tray • Includes fill level indicator, optical leak indicator, integrated carrying handles

Double walled tanks made of zinc plated sheet steel with PE inner container (HDPE). Storage tanks may only be set up inside buildings (two abutting walls with roof).

UNI

from RON

MULTI

3100.00

Accessories

Only approved for internal transport. With steel base pallet for forklift access on long side.

MULTI – storage and transport tank • Approved for on-site and off-site t ransport according to ADR (without pump attached) • Mandatory inspection required every 2.5 years (ADR 6.5.4.4.1b) – t ransport approval for PE tank is valid for 5 years • Low centre of gravity increases stability and improves handling and transport With permanently attached sheet steel pallet, accessible from four sides with forklift or pallet truck.

2 Ref.

RON

GRP filling bowl

977 869-1E

1250.00

Suction tube with tank coupling for tanks up to 1000 litres

977 871-1E

775.00

Suction tube with tank coupling for tanks up to 1500 litres

605 324-1E

845.00

Manual piston pump for storage tanks, suction tube/hose length 1640 mm, pump rate 0.25 l/stroke. Only suitable for diesel and oils.

611 671-1E

575.00

Hose for hand piston pump, electrically conductive, length 1.5 m

598 909-1E

175.00

Electric drum pump 230 V, pump rate 35 l/min. Only suitable for diesel and heating oil.

118 445-1E

1600.00

UNI – storage tank

Flow meter, electronic for uncalibrated applications

118 444-1E

1130.00

MULTI – storage and transport tank

All storage tanks on this page

1 2

General Building Inspection Approval DIBt, Berlin

Capacity Length x width x height

400

750

1000

1500

730 x 700 x 1170 978 189-1E 3100.00 977 865-1E 3750.00

980 x 770 x 1460 977 862-1E 3700.00 977 866-1E 4400.00

1280 x 800 x 1470 977 863-1E 4300.00 977 867-1E 5880.00

1640 x 800 x 1870 977 864-1E 7980.00 977 868-1E 9130.00

Ref. RON Ref. RON

CUBE tank systems For diesel, AdBlue® (AUS32) and used oil AdBlue® tank

• With hinged lid – approved for use in indoor and outdoor areas • Complete with accessories installed • General certification Z-40.21-510

For outdoor

Integrated sump tray, optical leak indicator, ventilation cap, fill level indicator. All components are optimally integrated and protected. No protruding, awkward parts – optimum handling.

Diesel tank 230 V electric pump, volumetric flow meter, hose reel with 8 m hose, automatic pump pistol with holster, filling connection with tank coupling and limit indicator, filter with water separator. Lid colour orange.

Capacity Length x width x height Diesel tank AdBlue® tank

Used oil tank

408 www.kaiserkraft.ro

Diesel tank

Used oil tank

l mm Ref. RON Ref. RON Ref. RON

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

230 V electric pump, volumetric flow meter, hose reel with 8 m hose, automatic pump pistol with holster, filling connection with 2” dry coupling, overflow protection, fan heater for valves and controls (winter). Lid colour blue.

Used oil tank Funnel with dirt strainer, drainage surface, suction tube with tank coupling, additional 1” and 2” connections. Lid colour orange.

1000 1200 x 800 x 1800 123 782-1E 17750.00

123 171-1E 9980.00

1500 1200 x 1150 x 1800 123 761-1E 18750.00 123 774-1E 32500.00 123 172-1E 12450.00

BLUE = Short delivery period

2500 1200 x 1800 x 1800 123 778-1E 21250.00 123 775-1E 34500.00 123 173-1E 14750.00

23051

on the tank

Hazardous goods storage For regulation compliant storage of hazardous goods outdoors • Sloping top for optimum drainage of water • Perforations in the doors for effective ventilation • Drums can be moved with pump or funnel in place • Delivered fully assembled • Lockable with cylinder lock Robust, welded construction made of zinc plated sheet steel. Additionally powder coated, body in light grey RAL 7035, trough and doors in light blue RAL 5012. Integrated sump tray with removable grate, manufacturer's declaration of conformity in accordance with StawaR. Can be lifted from below. For active and passive storage of water hazardous liquids indoors and outdoors. For passive storage of flammable liquids in outdoor areas.

2 With shelf and depot partition (accessories)

1 + 2 Drum and small container depots Collection capacity 220 litres.

Shelf for the storage of small containers. Width 830 mm, max. load 60 kg (distributed load). Adjustable in 25 mm increments. Ref. 111 850-1E RON 230.00 Partition for 2-door depot

Model Type Drum capacity Height at front / back Width x depth Internal dimensions H x WxD

mm mm mm

1 door 1 x 200 l 1950 / 2050 940 x 740 1440 x 830 x 650

2 doors 2 x 200 l 1790 / 1890 1780 x 740 1440 x 1660 x 650

111 847-1E 4200.00

111 849-1E 5630.00

Ref. RON

Ref. 111 851-1E RON 155.00

With shelf (accessory) All depots on this page Manufacture’s declaration of conformity (ÜHP) in accordance with German construction regulation list A part 1, DIBt, Berlin

ENVIRONMENT

Accessories

3 With small container shelf unit (accessory)

3 + 4 Drum storage units • Roof can be erected and is easy to open and close using two gas pressure springs • Two wide opening, space saving doors for optimum drum handling • Drums can be placed on EURO pallets and chemical pallets

23056

Model Drum capacity Height at front / back Width x depth Sump capacity Ref. RON

mm mm l

YELLOW = Ex stock

4 3 Horizontal drum storage with drum shelving only (accessory).

2 x 200 l / 6 x 60 l 1875 / 1895 1600 x 1150 320 175 810-1E 7380.00

4 x 200 l / 9 x 60 l 1875 / 1895 1600 x 1450 400 175 813-1E 9730.00

With drum shelf (accessory)

Environmental cupboards for outdoor storage can be found on page 422.

Accessories Drum shelf For horizontal drum storage. Two storage levels for 2 x 200 litre or 3 x 60 litre drums each (simply turn the drum support). Height x width x depth 850 x 1350 x 500 mm. Zinc plated. Easy installation. Ref. 175 808-1E RON 1050.00

Telefon 0250 702 110 service@kaiserkraft.ro

Small container shelf unit With 3 sump shelves, height adjustable. Height x width x depth 1350 x 1350 x 600 mm. Zinc plated. Easy installation. Ref. 175 809-1E RON 1650.00

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

409

For drums Integrated sump tray with support profiles for placing the containers on Euro pallets

For IBC / CTC tank container Integrated sump tray with PE storage platform as shelf

PE hazardous goods storage units

For indoor and outdoor storage of corrosive and water hazardous liquids in accordance with regulations • F or drums, IBC / CTC tank containers and small containers • Corrosion-free, weather resistant construction • Made of highly resistant polyethylene – for the storage of oils, acids and alkalis • Robust and durable – depots fully assembled • Two wide opening, lockable doors

1 – 3 With flat roof With clearance for forks at base. Large openings for easy loading with forklift and high lift stackers. Doors with bar lock. Housing grey, doors blue. Prepared for floor anchoring.

Including an emergency spill kit 10 absorbent sheets, 2 absorbent socks, 1 disposal bag, 1 pair of disposable gloves.

For small containers Including zinc plated shelf unit with 3 shelves, WxD 1300 x 800 mm, adjustable in 25 mm increments, max. load per shelf 250 kg. Shelf: supplied flat pack – easy self-assembly.

Hazardous substances stickers (GHS): corrosive and environment (included).

Model

General Building Inspection Approval DIBt, Berlin

Drum capacity 1000 l container capacity Sump capacity Height x width x depth Internal dimensions H x W x D Ref. RON Accessories PE grate PE drum stand for 60 x 200 litre drums, horizontal, H x W x D 390 x 475 x 620 mm PE drum pallet for 2 x 200 litre drums, horizontal, forklift access, H x W x D 300 x 1300 x 790 mm Floor anchoring set with 4 floor anchoring brackets

2 x 200 l small containers 4 x 200 l – – 1 l 250 250 1150 mm 1980 x 1560 x 1080 1980 x 1560 x 1080 2330 x 1540 x 1530 mm 1500 x 1370 x 910 1500 x 1370 x 910 1500 x 1370 x 1330 111 811-1E 118 513-1E 111 815-1E 8130.00 8980.00 12750.00 111 812-1E 1080.00 754 734-1E 645.00

Ref. RON Ref. RON Ref. RON Ref. RON

111 814-1E 375.00

754 734-1E 645.00 909 422-1E 1050.00 111 814-1E 375.00

4 + 5 With curved roof Integrated sump tray with zinc plated or PE grate. With clearance for forks at base – easy to load with pallet truck or forklift. Body moulded in a single piece. Lockable doors. Horizontal drum storage (2 x 200 l) only possible with drum stand.

Accessories Shelf set for 2-drum depot For storing small containers. Two adjustable mesh grid shelves, max. load 200 kg each. Height x width x depth 1150 x 1360 x 635 mm.

1000 l container capacity Drum capacity Sump capacity Height x width x depth with zinc plated grate

23060

410 www.kaiserkraft.ro

Model

General Building Inspection Approval DIBt, Berlin

with PE grate

Shelf set as an accessory

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

l mm Ref. RON Ref. RON

– 2 x 200 l 300 1900 x 1500 x 1040 611 643-1E 8730.00 611 644-1E 9130.00

1 4 x 200 l 1000 2160 x 1500 x 1480 523 520-1E 14450.00 523 521-1E 15450.00

BLUE = Short delivery period

23060

Ref. 611 645-1E RON 1750.00

General Building Inspection Approval DIBt, Berlin

Including hazardous substances stickers (GHS) corrosive and environment.

With IBC filling attachment (accessory)

Sheet steel hazardous goods storage

ENVIRONMENT

For regulation compliant outdoor storage of hazardous goods in drums and IBC tank containers • With integrated, leakproof welded 5 mm drum sump • Natural ventilation due to 3-sided air gap all round • Clearance height 100 mm for loading/unloading using high lift stacker or forklift truck • Hinged doors can be locked with cylinder lock • Rainwater runoff on the front and back Robust, corrosion protected steel construction. Steel frame and drum sump powder coated in black grey (RAL 7021), zinc plated panelling. Delivered fully assembled. For active and passive storage of water hazardous liquids in GHS categories 1 – 4 and for passive storage of flammable liquids in GHS categories 1 – 3 (H224-226) in outdoor areas.

1 + 2 Standard depot version

With steel step and IBC filling attachment (accessories)

Accessories

For direct placement of drums and IBC/CTC tank containers without dispensing stand.

Steel step Single step. Height x width x depth 200 x 675 x 424 mm.

3 + 4 Premium depot version For placement of drums and tank containers. IBC/CTC tank containers can be placed onto a dispensing stand. Drainage rails and push through stop on the inside. With forced ventilation (web/accessories) also approved for active storage of flammable liquids in outdoor areas.

Ref. 454 263-1E RON 595.00

IBC filling attachment Suitable for 1 IBC / CTC. Height 440 / 505 mm. Width x depth 1320 x 1216 mm. Ref. 454 262-1E RON 1750.00

23065

Model Drum capacity 1000 l container capacity Height x width x depth Internal dimensions H x W x D Sump capacity Max. load Weight Ref. RON

pcs. mm mm l kg kg

YELLOW = Ex stock

4 x 200 l 1 2300 x 1675 x 1565 1405 x 1350 x 1310 1000 2000 502 484 091-1E 22750.00

8 x 200 l 2 2005 x 2865 x 1565 1405 x 2540 x 1310 1000 4000 655 484 092-1E 29500.00

4 x 200 l 1 2500 x 1725 x 1865 1770 x 1400 x 1610 1000 2000 545 484 093-1E 23450.00

8 x 200 l 2 2295 x 2990 x 1865 1770 x 2665 x 1610 1000 4000 760 484 094-1E 31500.00

Telefon 0250 702 110 service@kaiserkraft.ro

Including emergency spill kits 10 absorbent sheets, 2 absorbent socks, 1 disposal bag, 1 pair of disposable gloves.

Storage depots with insulation against cold, PE tray inserts for storing corrosive media, forced ventilation and heating units and other accessories can be found in our online shop.

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

411

All containers on this double page Manufacture’s declaration of conformity (ÜHP) in accordance with German construction regulation list A part 1, DIBt, Berlin

Hazardous goods storage containers For regulation compliant, versatile and mobile outdoor storage of water polluting and flammable media

Model with additional exterior paintwork, sky blue RAL 5015

Please ask for details of fire protection containers.

• Approved for flammable liquids in GHS categories 1 – 3 as well as for water hazardous liquids in GHS categories 1 – 4 • Robust, zinc plated steel construction • Can be moved at any time when empty – crane eyelets, forklift access • With double doors as standard • Hot dip galvanised sump tray with grate, max. load 1000 kg/m² with evenly distributed load • Can be used as small container storage in conjunction with shelving (accessory) Zinc plated, particularly stable, profiled wall and roof p anels made of sheet steel. Reinforced roof and floor frame profiles, all round drainage rails (except for doors). Weather protected ventilation openings in the doors and rear wall. Additional exterior paintwork in sky blue RAL 5015 at extra cost – other colours on request.

Max. snow load 1 – 3 200 kg/m². 4 – 7 150 kg/m². EN 1055 compliant. Double doors With security lock. See table for size and position. Alternative door positions on request.

Unloading The unloading point must be accessible for a HGV trailer. A crane or forklift must be available on site for unloading. If not available, please ask for crane/forklift unloading when ordering. Ref. 605 323-1E RON on request

Model with zinc plated ramp

Crane eyelet

412 www.kaiserkraft.ro

Explosion protected forced ventilation

Zinc plated ramp

Mesh shelving units

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

23061

BLUE = Short delivery period

8 For the storage of water hazardous media in GHS categories 1 – 4

9 For passive storage of non-flammable substances in GHS categories 1 – 3

For storing tightly sealed containers. Not approved for opening, filling or emptying containers in storage. Permanent natural ventilation through all round ventilation openings.

a For the active storage of flammable substances in GHS categories 1 – 3

For storing opened containers. Approved for opening, filling and emptying of containers in storage. With explosion protected forced ventilation to comply with regulatory requirements, five-fold air exchange. Fan wired to exterior mounted switch box, 230 V.

Options available at extra cost

Exterior paintwork in sky blue RAL 5015. Explosion-protected fume monitoring device only for the active storage of flammable media. –M onitors effectiveness of ventilation in accordance with TRGS 510 – Required for a minimum of two-fold air change – I ncluding flow sensor with evaluation unit, equipotential bonding bar, alarm horn

Zinc plated model

3 2

Model with additional exterior paintwork in sky blue RAL 5015

Model with additional exterior paintwork

More options

ONLINE! Model

Width x depth Internal width x depth Sump capacity Position of double doors Door W x H Supplied

Height external / internal

zinc plated

Height external / internal

zinc plated

Height external / internal

Options Exterior paintwork sky blue RAL 5015 Explosion-protected fume monitoring device

23062

2075 x 1075 1980 x 980 300 long side 1950 x 1900 assembled

3075 x 2075 2980 x 1980 1000 long side 1750 x 1900 assembled

5075 x 2075 4980 x 1980 1300 long side 1950 x 1900 assembled

4075 x 2875 3980 x 2780 2000 long side 1950 x 1900 flat pack

6075 x 2875 5980 x 2780 2800 long side 1950 x 1900 flat pack

5075 x 4330 4980 x 4210 2600 long side 1950 x 1900 pre-assembled, final assembly by customer

5075 x 6560 4980 x 6440 3900 short side 1950 x 1900 pre-assembled, final assembly by customer

mm Ref. RON mm Ref. RON mm Ref. RON

2385 / 1970 605 270-1E 12250.00 2570 / 2150 605 273-1E 13250.00 2385 / 1970 605 275-1E 20950.00

2385 / 1970 605 277-1E 20450.00 2570 / 2150 605 279-1E 23450.00 2385 / 1970 605 282-1E 30500.00

2385 / 1970 605 284-1E 31500.00 2570 / 2150 605 286-1E 34000.00 2385 / 1970 605 288-1E 42000.00

2400 / 1970 605 290-1E 34000.00 2585 / 2150 605 292-1E 37500.00 2400 / 1970 605 294-1E 44500.00

2385 / 1970 605 296-1E 49500.00 2570 / 2150 605 299-1E 57500.00 2385 / 1970 605 302-1E 62500.00

2605 / 1900 605 304-1E 62500.00 2790 / 2080 605 306-1E 64500.00 2605 / 1900 605 308-1E 72500.00

2605 / 1900 605 311-1E 89500.00 2790 / 2080 605 313-1E 92500.00 2605 / 1900 605 315-1E 99500.00

Ref. RON Ref. RON

605 272-1E on request 118 316-1E 10950.00

605 278-1E on request 118 316-1E 10950.00

605 285-1E on request 118 316-1E 10950.00

605 291-1E on request 118 316-1E 10950.00

605 297-1E on request 118 316-1E 10950.00

605 305-1E on request 118 316-1E 10950.00

605 312-1E on request 118 316-1E 10950.00

zinc plated

For individual expansion.

mm mm l

Accessories

Model Mesh shelving set, 3 storage levels, pre-mounted to container, zinc plated

Loading ramp, zinc plated Interior lighting, completely installed, on/off switch on outside, wired to exterior mounted switch box, 230 V

YELLOW = Ex stock

Width x depth Width x depth Width x depth Length x width Not explosion protected Explosion protected

Telefon 0250 702 110 service@kaiserkraft.ro

800 x 500 mm 1800 x 500 mm 2600 x 500 mm 1200 x 1000 mm

Ref. 605 317-1E 605 318-1E 605 319-1E 605 322-1E 605 321-1E 605 320-1E

ENVIRONMENT

Please order options together with container – no retrofitting possible.

RON 1700.00 2400.00 3650.00 2000.00 4100.00 5480.00

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

413

Options Please order together with container, no retrofitting possible.

6 Convection heater For frost-free storage of water hazardous media in GHS categories 1 – 4. Convection heater (not explosion protected), factory fitted, wired to exterior mounted switch box, 230 V.

2 Ice and condensation free

Model with electric heater, sump tray insulation, inside light, shelf set and loading ramp (accessories) General Building Inspection Approval DIBt, Berlin

Insulated hazardous goods storage containers For frost-free, regulation compliant, versatile and mobile outdoor storage of temperature sensitive hazardous goods

For frost-free, active or passive storage of flammable media in GHS categories 1 – 3 Storage of opened containers and approved for opening, filling, draining during storage. Electric heater (T3 explosion protection), factory fitted with explosion protected forced ventilation to comply with regulatory 5-fold air exchange requirement. Wired to exterior mounted switch box, 230 V.

Detailed product description, models and technical data, as well as hazardous goods storage containers, on page 412.

Max. snow load

Please enquire about additional models such as containers with air conditioning and fire protection containers.

1 – 3 200 kg/m². 4 – 5 150 kg/m². EN 1055 compliant.

Model

2385 x 2075 x 1075 1900 x 1840 x 910 300 long side 1950 x 1900 453 879-1E 22750.00

2385 x 3075 x 2075 1900 x 2840 x 1840 1000 long side 1750 x 1900 453 880-1E 33500.00

2385 x 5075 x 2075 1900 x 4840 x 1840 1300 long side 1950 x 1900 453 881-1E 46500.00

2400 x 4075 x 2875 1900 x 3840 x 2640 2000 long side 1950 x 1900 453 882-1E 59500.00

2385 x 6075 x 2875 1900 x 5840 x 2640 2800 long side 1950 x 1900 453 883-1E 79500.00

kW Ref. Extra cost RON

2 453 884-1E 5730.00

3 453 885-1E 6730.00

Electric heater

kW Ref. Extra cost RON Insulation for the sump tray Ref. Extra cost RON Exterior paintwork, sky blue RAL 5015 Ref. Extra cost RON

2 453 886-1E 23450.00 523 507-1E 3100.00 605 272-1E on request

2 453 886-1E 23450.00 523 508-1E 5230.00 605 278-1E on request

3 453 887-1E 27000.00 523 509-1E 8230.00 605 285-1E on request

3 453 887-1E 27000.00 454 738-1E 8980.00 605 291-1E on request

2x2 453 888-1E 46500.00 454 739-1E 12450.00 605 297-1E on request

Height x width x depth Internal dimensions H x W x D Sump capacity Position of double doors Door W x H Ref. RON Options 6 Convection heater

mm mm l mm

Power

explosion protected

Accessories

Loading ramp, zinc plated Interior lighting, completely installed, on/off switch on outside, wired to exterior mounted switch box, 230 V

414 www.kaiserkraft.ro

Explosion-protected fume monitoring device for electric heater – Monitors effectiveness of ventilation in accordance with TRGS 510 – Proscribed with at least twofold air exchange – Including flow sensor with evaluation unit, equipotential bonding bar, alarm horn Ref. 118 316-1E RON 10950.00

8 Insulation for the sump tray 9 Exterior paintwork, sky blue RAL 5015

Mesh shelving units (accessories)

Unloading

For individual expansion.

Model Mesh shelving set, 3 storage levels, pre-mounted to container, zinc plated

23063

7 Electric heater

• Heating (accessory) not explosion protected or explosion protected convection/electric heaters according to model • Optionally with insulated sump tray to reduce heater power and heating costs • Delivered assembled and ready to install

Width x depth Width x depth Width x depth Length x width Not explosion protected Explosion protected

800 x 500 mm 1800 x 500 mm 2600 x 500 mm 1200 x 1000 mm

Ref. 605 317-1E 605 318-1E 605 319-1E 605 322-1E 605 321-1E 605 320-1E

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

RON 1700.00 2400.00 3650.00 2000.00 4100.00 5480.00

The unloading point must be accessible for a HGV trailer. A crane or forklift must be available on site for unloading. If not available, please ask for crane/forklift unloading when ordering. Ref. 605 323-1E RON on request BLUE = Short delivery period

23063

• Thermally insulated containers protect valuable media against the effects of frost and low temperatures • The inside of all walls, doors and the roof are insulated with 60 mm thick, non-flammable insulation material • Approved for water hazardous liquids in GHS categories 1 – 4 as well as flammable liquids in GHS categories 1 – 3

Hazardous goods shelf containers

All items on this page

For regulation compliant outdoor storage of large quantities of drums and IBC / CTC containers with fl ammable and environmentally hazardous liquids

General Building Inspection Approval DIBt, Berlin

• Storage of flammable liquids in GHS categories 1 – 3 as well as water hazardous liquids in GHS categories 1 – 4 in outdoor areas • Drums can be stored directly in the container or on pallets; IBCs can be stored directly • Space saving storage on two storage levels minimises per unit storage cost • Lockable double doors or sliding door • Push-through stops and splash protection on each storage level • Single sided access • Includes potential equalisation to prevent electrostatic discharge Sturdy, steel frame construction with integrated sump tray and natural ventilation (self-ventilating). Roof, rear wall and side walls made of zinc plated sheet steel, painted red. Trough wall thickness 5 mm, leak tested with factory test certificate. Hot dip galvanised, removable grates on both s torage levels. Max. load per grate 10 kN/m². Prepared for securing to the ground, foot height 100 mm. Crane eyelets for unloading and transport.

ENVIRONMENT

Container for 32 x 200 litre drums

Container for 6 x 1000 litre IBCs/CTCs

23064

Please enquire about other colours, accessories, alternative models, individual project planning etc. Please ask for details of fire protection containers.

Drum capacity 1000 l container capacity Sump capacity Door type Height x width x depth Internal dimensions H x W x D flame red RAL 3000 light blue RAL 5012 grey white RAL 9002

Container for 12 x 1000 litre IBCs/CTCs

l mm mm Ref. Ref. Ref. RON

YELLOW = Ex stock

16 x 200 l – 320 double hinged doors 2980 x 3175 x 1500 2 x 1250 x 2970 x 1250 111 852-1E 111 853-1E 111 854-1E 34000.00

32 x 200 l – 640 sliding door 2980 x 6245 x 1550 2 x 1250 x 2 x 2900 x 1250 111 855-1E 111 857-1E 111 858-1E 48500.00

– 4 1000 double hinged doors 3465 x 3175 x 1500 2 x 1400 x 2970 x 1250 111 859-1E 111 860-1E 111 861-1E 40000.00

Telefon 0250 702 110 service@kaiserkraft.ro

– 6 1000 double hinged doors 3482 x 3510 x 1500 2 x 1400 x 3300 x 1250 111 862-1E 111 863-1E 111 865-1E 54500.00

– 8 1000 sliding door 3465 x 6245 x 1550 2 x 1400 x 2 x 2920 x 1250 111 866-1E 111 867-1E 111 868-1E 67500.00

– 12 1200 sliding door 3395 x 7100 x 1550 2 x 1400 x 2 x 3250 x 1250 111 869-1E 111 870-1E 111 871-1E 84500.00

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

415

Gas cylinder cupboards • • • • •

Ideal for outdoor storage of propane gas cylinders Sloping top for optimum drainage of water Doors and side walls with ventilation slots Lockable with cylinder lock Delivered fully assembled

Robust, welded construction made of zinc plated sheet steel. Additionally powder coated, body in light grey RAL 7035, doors in light blue RAL 5012. Closed rear wall. Base and removable intermediate shelf made of zinc plated, perforated sheet metal. Warning labels. Model

2150.00

RON Nr. 111 809-1E

Number of doors Cylinder capacity

pcs.

External height Width x depth Ref. RON

mm mm

1 2 4 x 33 kg or 10 x 11 kg 9 x 33 kg or 20 x 11 kg or 18 x 5 kg or 36 x 5 kg 1500 / 1600 840 x 690 111 809-1E 2150.00

1500 / 1600 1680 x 690 111 810-1E 4400.00

Mesh gas cylinder cupboards and trolleys For regulation compliant storage of gas cylinders • Robust, welded steel frame construction with wire mesh • With roof – fully assembled • Two hinged doors with cylinder lock (common key) Powder coated entirely in blue RAL 5012 as standard.

1 Gas cylinder trolley

With roof, base and push handle. Max. load 500 kg. 2 swivel castors and 2 fixed castors, wheel Ø 200 mm, solid rubber tyres. Swivel castors with double stops.

2 Gas cylinder cupboard

Cylinder securing chain, mounting holes for anchoring to floor. Model Height x width x depth

Ref. RON Accessories Mesh shelf

Mesh shelf Hot dip galvanised. Additional storage level. Max. load 100 kg.

1800 x 1150 x 740

1850 x 1250 x 850

6 x 33 kg or 6/12 x 11 kg 983 779-1E 4350.00

6 x 33 kg or 8/16 x 11 kg or 15 x 50 litre 983 777-1E 4800.00

Ref.

983 782-1E

983 781-1E

RON Ref. RON

500.00 716 080-1E 695.00

775.00

Cylinder capacity

Accessories

Drawbar kit for gas cylinder trolleys Simply screws on.

Drawbar kit

Gas cylinder depots

Mesh walls with closed base. Two hinged doors with sliding bolt lock, can be secured with a padlock. Cylinder securing chains.

2 23066

416 www.kaiserkraft.ro

Ramp as an accessory

1 Without intermediate shelf

For large gas cylinders.

2 With one fixed intermediate shelf

For small gas cylinders.

Ramp for easy storage and removal. Height x width x depth 169 x 900 x 400 mm. Model Cylinder capacity Height x width x depth Ref. RON Accessories Ramp

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

Ref. RON

12 x 50 kg or 20 x 40 kg or 8 x 33 kg

16 x 19 kg or 16 x 11 kg or 28 x 5 kg

2100 x 1235 x 1070

111 704-1E 10250.00

111 705-1E 10950.00

111 706-1E 1200.00

BLUE = Short delivery period

23066

• Particularly robust, welded and zinc plated steel construction for outdoor use • Clearance for forklift • Complete with roof and base – fully assembled • Ideal for storing gas cylinders – for universal use

Gas cylinder mesh containers

With roof and d ouble doors

For regulation compliant outdoor storage of gas cylinders in accordance with TRGS 510 • S turdy, hot-dip galvanised steel frame construction • Rear panels, side panels and hinged doors made of wire mesh for optimal ventilation • Hinged gates, lockable using profile cylinder • See below for an extensive range of accessories

1 Flat pack gas cylinder containers For self-assembly As standard without grate floor. Prepared for anchoring to floor. Supplied flat pack – easy self-assembly. Without roof or with roof made of painted trapezoidal sheet metal, snow load approx. 75 kg/m². With single hinged door (W x H 1000 x 2000 mm) or double doors, ideal for gas cylinder pallets.

Accessories for flat pack containers Cylinder capacity Width x depth without cover

Gas cylinder pallets For safe stacker transport. Hot dip galvanised steel frame with forklift pockets and safety chains. Cylinder capacity Length x width x height

4 x Ø 250 mm

8 x Ø 250 mm

500 x 860 x 1000

1100 x 860 x 1000

761 259-1E 1850.00

761 260-1E 2500.00

Ref. RON

single hinged door double hinged doors

with cover

single hinged door double hinged doors

Accessories Grate floor

16 x Ø 220 mm

32 x Ø 220 mm

48 x Ø 220 mm

60 x Ø 220 mm

78 x Ø 220 mm

104 x Ø 220 mm

mm External height Ref. RON Ref. RON External height Ref. RON Ref. RON

1085 x 1085

2100 x 1085 2070 mm 909 358-1E 8380.00 111 645-1E 8480.00 2160 mm 909 364-1E 9380.00 111 646-1E 9380.00

2100 x 1500 2070 mm 909 359-1E 8730.00 111 647-1E 8880.00 2160 mm 909 365-1E 9880.00 111 648-1E 9630.00

2400 x 1500 2070 mm 909 361-1E 9880.00 111 649-1E 9630.00 2160 mm 909 366-1E 11450.00 111 650-1E 11250.00

3100 x 1500 2070 mm 909 362-1E 10950.00 111 652-1E 10750.00 2160 mm 909 367-1E 11950.00 111 653-1E 11950.00

3100 x 2100 2070 mm 909 363-1E 11950.00 111 654-1E 11950.00 2160 mm 909 368-1E 14250.00 111 655-1E 13950.00

Ref. RON

983 711-1E 1350.00

983 714-1E 2450.00

983 716-1E 3350.00

983 718-1E 4650.00

983 720-1E 5730.00

983 723-1E 6980.00

2160 mm 983 709-1E 9480.00

2 Assembled gas cylinder containers With forklift pockets • Pre-assembled with roof and base • Forklift pockets make empty transport easy with a forklift truck Floor made of ribbed sheet metal or grate optionally available, max. load per 1000 kg/m². Single door WxH 1000 x 2000 mm. Double doors open over the full width – ideal when using gas cylinder pallets. Roof snow load approx. 75 kg/m².

ENVIRONMENT

Gas cylinder pallet

Grate floor Can be driven on, zinc plated.

Easy transport

Accessories for assembled containers Partition for dividing the container. Max. one wall per container.

Loading ramp, hot dip galvanised LxWxH 1140 x 800 x 114 mm. Ref. 118 329-1E RON 1280.00

With grate floor and loading ramp Cylinder capacity

Accessories Gas cylinder shelf unit Max. two units can be stacked. Length x width x height 1300 x 1000 x 850 mm. Ref. 909 357-1E RON 1330.00

Width x depth External height Number of doors Type of floor with grate with ribbed sheet metal

Gas cylinder holder for vertical storage comprised of 1 bracket with chain, 1 mounting plate. 23595

Container for 60 cylinders with grate floor and accessories: partition, gas cylinder holder and gas cylinder shelf

Ref. 983 724-1E RON 365.00 YELLOW = Ex stock

Accessories Partitions

16 x Ø 220 mm

32 x Ø 220 mm

45 x Ø 220 mm

60 x Ø 220 mm

78 x Ø 220 mm

104 x Ø 220 mm

mm mm

1085 x 1140 2145 1

2115 x 1155 2260 2

2115 x 1570 2260 2

2535 x 1575 2260 2

3135 x 1570 2260 2

3135 x 2170 2260 2

Ref. RON Ref. RON

118 335-1E 10950.00 118 342-1E 11250.00

118 336-1E 15450.00 118 343-1E 15750.00

118 337-1E 16950.00 118 344-1E 16950.00

118 339-1E 18750.00 118 345-1E 18950.00

118 340-1E 20250.00 118 347-1E 20450.00

118 341-1E 24450.00 118 348-1E 24950.00

118 330-1E 695.00

118 331-1E 975.00

118 332-1E 975.00

118 333-1E 975.00

118 334-1E 1380.00

Ref. RON

Telefon 0250 702 110 service@kaiserkraft.ro

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

417

Environmental and chemical storage cupboards For safe storage of water hazardous liquids in small containers

1700.00

• T ray shelves and base sumps with leakproof welds (without certification) • Perforations in the doors for ventilation • Lockable with cylinder lock

RON Nr. 175 789-1E

Sheet steel construction. Powder coated, body in light grey RAL 7035, doors in melon yellow RAL 1028. Removable shelves and tray shelves, height adjustable in 25 mm increments. Max. load 40 kg per shelf (distributed load). Tray shelf/base sump capacity 11 l each.

1 + 4 Empty cupboard housings For fitting out with shelves, tray shelves and base sumps to individual requirements.

2 Model External height Width x depth Number of storage levels

mm mm pcs.

Internal fittings

900 920 x 400 –

900 920 x 400 2

1800 920 x 400 –

1800 920 x 400 4

–

1 shelf, 1 base sump

1 tray shelf, 1 base sump

–

3 shelves, 1 base sump

3 tray shelves, 1 base sump

175 789-1E 1700.00

175 791-1E 1900.00

175 782-1E 1600.00

175 787-1E 2100.00

175 788-1E 2250.00

175 783-1E 1400.00

Ref. RON

Accessories Shelf, powder coated Sump shelf / base sump, zinc plated Perforated metal cover, zinc plated for tray shelf / base sump

Ref. RON Ref. RON Ref. RON

175 785-1E 120.00 175 784-1E 210.00 175 786-1E 275.00

Chemical storage cupboards

Hazardous goods box

For regulation compliant storage of water hazardous and poisonous substances in laboratories • B ase sump tray with certification – leakproof welds, made of 3 mm sheet steel • Ventilation grid near the base for optimum ventilation • Prepared for connection to a forced ventilation unit Made of quality sheet steel with robust textured powder coating. Body in charcoal RAL 7016, doors in three colours. Adjusting device for levelling on uneven surfaces. Two door models Solid panel doors made of sheet steel or with impact resistant, acrylic glass vision panels. Interior fittings Shelves zinc plated, adjustable in increments of 25 mm. Max. load 100 kg (distributed load). Base sump tray, zinc plated, tested in accordance with StawaR / manufacturer's declaration of conformity. Sump capacity 33 litres. Zinc plated perforated sheet metal cover as an accessory.

1 1 2

Number of shelves Height x width x depth Internal dimensions H x W x D Door type traffic red RAL 3020 gentian blue RAL 5010 light grey RAL 7035

23075

Accessories

Ref. RON

418 www.kaiserkraft.ro

storage box, type 30

mm mm

1950 x 1055 x 520 1835 x 996 x 493 closed

1950 x 1055 x 520 1835 x 996 x 493 with window

1950 x 1055 x 520 1835 x 996 x 493 closed

1950 x 1055 x 520 1835 x 996 x 493 with window

Ref. Ref. Ref. RON

111 659-1E 111 661-1E 111 662-1E 4100.00

111 663-1E 111 664-1E 111 665-1E 5000.00

118 463-1E 290 449-1E 290 450-1E 11750.00

118 464-1E 290 451-1E 290 452-1E 13250.00

Shelf for cupboard

Perforated metal cover for cupboard base sump tray

Shelf for safety box

111 666-1E 160.00

111 667-1E 240.00

118 468-1E 450.00

Fitted with additional hazardous goods storage box for regulation compliant storage of small amounts of flammable liquids – such as paint, spray cans etc. Hazardous goods storage box compliant with TRGS 510 (appendix 3), permanently integrated, fireproof for 30 minutes. Type approved type 30 according to EN 14470-1. Two self-closing hinged doors. Base sump tray capacity 5 litres. Ventilation connection (DN 75) in the roof of the cupboard. Charcoal RAL 7016. Internal dimensions height x width x depth 414 x 942 x 419 mm.

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

23075

Model

1 Without hazardous goods storage box 2 With a fire resistant hazardous goods

BLUE = Short delivery period

Environmental cupboards

Only applies for base sump trays

All items on this page

Manufacture’s declaration of conformity (ÜHP) in accordance with German construction regulation list A part 1, DIBt, Berlin

For regulation compliant storage of water hazardous media in small containers • • • •

TÜV tested design Cupboards manufactured in accordance with EN 13501-1 Removable, seamlessly welded, high capacity tray shelves Max. load per tray shelf 100 kg (evenly distributed load)

Robust cupboard construction, made of welded quality sheet steel. Textured powder coating, body in light grey RAL 7035, doors in three colours. Zinc plated, seamlessly welded tray shelves, removable and height adjustable in increments of 33 mm. Sump capacity – Cupboard / compartment width 500 mm Tray shelves: 10 litres Base sump trays: 19 litres – Cupboard width 1000 mm Tray shelves: 22 litres Base sump trays: 43 litres

1 – 5 With solid panel cupboard doors

6 – a With perforated cupboard doors

5 2

Cupboards with perforated doors for natural ventilation. D ocument pouches, rotary handle cylinder lock.

5 + a With centre partition for even more order

1 9

and a clear overview

ENVIRONMENT

Cupboards with solid panel doors. Metal handles and cylinder lock.

7 tray shelves, 3 drawers for small parts (not seamlessly welded), height 100 mm, width 415 mm, ball bearing mounted, telescopic rails, max. load 35 kg each.

Accessories Perforated metal covers to place in the tray shelves and b ase sump trays. Base sump trays, seamlessly welded with manufacturers declaration of conformity in accordance with StawaR.

a 6

Please ask for details about certification of approval.

Model Height x width x depth Tray shelves Door colour light grey RAL 7035 signal yellow RAL 1003 gentian blue RAL 5010

900 x 500 x 500 2

900 x 1000 x 500 2

1800 x 500 x 500 4

1800 x 1000 x 500 4

1800 x 1000 x 500 7

900 x 500 x 500 2

900 x 1000 x 500 2

1800 x 500 x 500 4

1800 x 1000 x 500 4

1800 x 1000 x 500 7

Ref. Ref. Ref. RON

709 661-1E 709 663-1E 709 664-1E 2050.00

709 665-1E 709 666-1E 709 739-1E 3100.00

709 742-1E 709 759-1E 709 766-1E 3150.00

709 877-1E 709 878-1E 709 969-1E 3300.00

709 970-1E 709 971-1E 709 973-1E 5130.00

709 974-1E 709 975-1E 709 976-1E 2300.00

709 977-1E 709 978-1E 709 979-1E 3300.00

709 981-1E 709 982-1E 709 983-1E 3400.00

709 984-1E 709 985-1E 709 986-1E 3700.00

709 987-1E 709 988-1E 709 997-1E 5980.00

Ref. RON Ref. RON Ref. RON

710 084-1E 230.00 709 998-1E 150.00 709 659-1E 745.00

710 085-1E 275.00 710 073-1E 180.00 709 660-1E 945.00

710 084-1E 230.00 709 998-1E 150.00 709 659-1E 745.00

710 085-1E 275.00 710 073-1E 180.00 709 660-1E 945.00

710 084-1E 230.00 709 998-1E 150.00 709 659-1E 745.00

710 085-1E 275.00 710 073-1E 180.00 709 660-1E 945.00

710 084-1E 230.00 709 998-1E 150.00 709 659-1E 745.00

710 085-1E 275.00 710 073-1E 180.00 709 660-1E 945.00

710 084-1E 230.00 709 998-1E 150.00 709 659-1E 745.00

Accessories Additional tray shelf

23097

Perforated metal cover Base sump tray

YELLOW = Ex stock

Telefon 0250 702 110 service@kaiserkraft.ro

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

419

Environmental cupboards

Manufacture’s declaration of conformity (ÜHP) in accordance with German construction regulation list A part 1, DIBt, Berlin

For regulation compliant storage of water hazardous liquids in small containers

• Seamlessly welded tray shelves • Base sump trays made of 3 mm sheet steel, seamlessly welded in accordance with StawaR, with manufacturer's d eclaration of conformity • Perforations in the doors for natural ventilation • Ventilation outlet for connection to an on-site exhaust system or ventilation kit, DN 75 (cupboard height 1950 mm) • Lockable with cylinder lock • Concealed lock linkage

1 from RON

2050.00

Robust, reinforced sheet steel construction. Powder coated, body in light grey RAL 7035, doors in light blue RAL 5012. Removable shelves or tray shelves, height adjustable in increments of 25 mm. Max. load per shelf / tray shelf (distributed load) 65 kg. 4 100 kg. Sump capacity 20 litres per tray shelf. 30 litres per base sump trays, 39 litres for 1200 mm wide chemical storage cupboard.

3 1 Please contact us before ordering to determine whether corrosion resistance of a cupboard is compatible with media to be stored.

1 Side cabinets For space saving storage directly at the workstation. – 1 tray shelf, zinc plated, height adjustable – 1 base sump tray, zinc plated Two widths, with one or two hinged doors.

2 Full height side cupboards – 3 tray shelves, zinc plated, height adjustable – 1 base sump tray, zinc plated

3 Chemical and poison storage cupboards

For liquids, chemicals, poisons etc. which are to be kept under lock and key. – 4 shelves, painted, height adjustable – 1 base sump tray, painted Door opening angle 135°.

4 Cabinets For orderly, separate storage of different chemicals. 8 separate storage compartments. Each with removable, zinc plated sump tray. Practical labelling strips. Centre partition.

5 Illustrations shown with accessories – please order separately.

Model

23076

External width External height x depth Number of storage levels Ref. RON Accessories Additional shelf / tray shelf Perforated metal cover for tray shelf / base sump Shelf / tray shelf dividers Pack of 4 pcs.

420 www.kaiserkraft.ro

mm mm

500 1000 x 500 2 710 287-1E 2050.00

950 1000 x 500 2 710 289-1E 2650.00

500 1950 x 500 4 710 980-1E 2650.00

950 1950 x 500 5 710 983-1E 3300.00

1200 1950 x 500 5 710 984-1E 3600.00

Ref. RON Ref. RON Ref. RON / pack

710 988-1E 240.00 710 990-1E 325.00 710 985-1E 400.00

523 485-1E 265.00 523 487-1E 340.00 710 985-1E 400.00

710 988-1E 240.00 710 990-1E 325.00 710 985-1E 400.00

715 335-1E 130.00 523 487-1E 340.00 711 019-1E 400.00

715 337-1E 160.00 523 489-1E 415.00 711 019-1E 400.00

5 XL sliding door cupboards

1000 1950 x 530 8 710 981-1E 5980.00

2000 1950 x 500 8 710 982-1E 8230.00

710 990-1E 325.00

716 118-1E 230.00 716 246-1E 390.00 710 987-1E 400.00

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

Space saving – no awkward hinged doors. – 6 tray shelves, zinc plated, height adjustable – 2 base sump trays, zinc plated 2 sliding doors, centre partition.

23076

BLUE = Short delivery period

6 With solid panel doors – 3 tray shelves, zinc plated, height adjustable – 1 base sump tray, zinc plated, seamlessly welded

7 With vision panel doors Hinged doors with large, impact resistant acrylic glass windows. Contents always visible for quick access. – 3 tray shelves, zinc plated, height adjustable – 1 base sump tray, zinc plated, seamlessly welded

8 With pull-out tray shelves For quick and convenient access to the containers s tored inside. – 3 drawers with zinc plated tray shelves, sump c apacity 20 litres per shelf – 1 drawer with seamlessly welded base sump tray Max. load per drawer 60 kg (distributed load). Drawers with pull-out stops – only one drawer can be opened at a time. Drawers are not height adjustable.

9 With drawers for canisters

from RON

2600.00

7 6

Please contact us before ordering to determine whether corrosion resistance of a cupboard is compatible with media to be stored.

ENVIRONMENT

For regulation compliant storage and filling of standard canisters (not included). – 1 drawer with base sump tray (for collecting drops when filling etc.) – 2 drawers for tall canisters (height approx. 410 mm) with 8 holders for canisters, 20 – 30 litres – 1 drawer for short canisters (height approx. 300 mm) with 5 holders for canisters, 5 – 10 litres – 1 drawer with tray shelf and perforated metal cover Max. load per drawer 60 kg (distributed load). Drawers with pull-out stops – only one drawer can be opened at a time. Drawers are not height adjustable. Canister holders can be positioned as required in the drawers. Supplied without canisters. Tray shelves Zinc plated, removable, height adjustable in 25 mm increments. Max. load per shelf 65 kg (distributed load). Sump capacity 20 litres per tray shelf. Base sump tray – Cupboard width 950 mm: 30 litres – Cupboard width 1200 mm: 39 litres

9 Perforated metal covers

Manufacture’s declaration of conformity (ÜHP) in accordance with German construction regulation list A part 1, DIBt, Berlin

For tray shelves and base sumps.

Model

External width External height x depth Number of storage levels

mm mm

Ref. RON Accessories Additional shelf / tray shelf

Shelf / tray shelf dividers

23077

For orderly storage in cupboards. Simply place on shelves / tray shelves. Sheet steel, powder coated grey RAL 7035. Pack of 4.

Perforated metal cover for tray shelf / base sump Shelf / tray shelf dividers Pack of 4 pcs.

YELLOW = Ex stock

950 1950 x 500 4

1200 1950 x 500 4

950 1950 x 500 4

1200 1950 x 500 4

950 1950 x 500 4

1200 1950 x 500 4

950 1950 x 550 5

523 483-1E 2600.00

523 484-1E 3400.00

523 492-1E 3950.00

523 493-1E 4700.00

523 490-1E 4650.00

523 491-1E 4950.00

523 494-1E 6130.00

Ref. RON Ref. RON Ref.

523 485-1E 265.00 523 487-1E 340.00 710 985-1E

523 486-1E 340.00 523 489-1E 415.00 710 985-1E

523 485-1E 265.00 523 487-1E 340.00 710 985-1E

523 486-1E 340.00 523 489-1E 415.00 710 985-1E

715 338-1E 300.00 710 986-1E

715 706-1E 375.00 710 986-1E

523 487-1E 340.00

RON / pack

400.00

Telefon 0250 702 110 service@kaiserkraft.ro

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

421

Environmental cupboards for outdoor storage For regulation compliant outdoor storage of small containers • Protruding, sloping roof for optimum d rainage of rain water • Perforations in the doors for effective ventilation, lockable with cylinder lock • Base sump tray made of 3 mm sheet steel, seamlessly welded in accordance with StawaR, with manufacturer's declaration of conformity

4 3 2

For outdoor

Manufacture’s declaration of conformity (ÜHP) in accordance with German construction regulation list A part 1, DIBt, Berlin

Model

External height Width x depth Number of storage levels Internal fittings

mm mm

2100 1200 x 600

483 870-1E 3600.00

Ref. RON

2100 2100 2100 1200 x 600 1200 x 600 1200 x 600 4 4 4 3 shelves, 1 3 tray shelves, 1 3 mesh grid base sump tray base sump tray shelves, 1 base sump tray

483 877-1E 4600.00

483 878-1E 5000.00

483 879-1E 5230.00

Accessories Ref. RON Ref. Shelf RON Ref. Mesh grid shelf RON Ref. Base sump tray RON Perforated metal cover for Ref. base sump tray

483 872-1E 375.00 483 871-1E 215.00 483 873-1E 475.00 483 874-1E 595.00 483 876-1E

RON Ref.

290.00 483 875-1E

RON

275.00

Tray shelf

Perforated metal cover for tray shelf

Robust, welded construction made of zinc plated sheet steel. Additionally powder coated, body in light grey RAL 7035, doors in light blue RAL 5012. Door seals. Clearance for forklift. Removable shelves, height adjustable in increments of 25 mm. Base sump tray, zinc plated, sump capacity 66 litres. For active and passive storage of water hazardous media indoors and outdoors. For passive storage of flammable media in outdoor areas.

1 Empty cupboard housing For fitting out with shelves and base sump tray to individual requirements. 2 With shelves All-round edge, max. load 80 kg each (distributed load), zinc plated. 3 With tray shelves Leakproof welds, sump capacity 30 litres each, max. load 80 kg each (distributed load), zinc plated. 4 With mesh grid shelves Max. load 120 kg each (distributed load), zinc plated.

PE environment cupboards For regulation compliant storage of aggressive water hazardous and poisonous liquids in work rooms

Grey body, blue doors. Lockable with security lock. Interior fittings 4 shelves, max. load 50 kg each (distributed load). Height adjustable in 210 mm increments.

Including an emergency spill kit: – 10 absorbent sheets – 2 absorbent socks – 1 disposal bag – 1 pair of disposable gloves

Model

Height x width x depth Type Base sump tray capacity Cupboard with 4 shelves

23098

Please enquire about suitable ventilation kits. Hazardous substances stickers (GHS): “corrosive” and “environment” included.

422 www.kaiserkraft.ro

More PE environment cupboards

galvanised 1.4301 stainless steel

Accessories Additional shelf

ONLINE!

galvanised 1.4301 stainless steel

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

l Ref. RON Ref. RON

1990 x 600 x 600 1 door 35 111 823-1E 4300.00 111 822-1E 4650.00

1990 x 1200 x 600 2 doors 75 111 828-1E 6380.00 111 827-1E 6980.00

Ref. RON Ref. RON

111 825-1E 175.00 111 824-1E 300.00

111 831-1E 230.00 111 829-1E 425.00

BLUE = Short delivery period

23098

• Robust construction made of highly resistant polyethylene • With integrated, leak-proof base sump tray • Prepared for connection to a forced ventilation unit

FM safety cupboards For the storage of flammable and water hazardous liquids according to FM (please observe country-specific regulations) Robust, double door cupboards made of welded, double walled, powder coated sheet steel. Easy closing, self-locking doors. Three point locking, can also by locked with a padlock. Reflective labelling. Adjusting device for levelling on uneven surfaces. Ventilation openings with flame trap, plug-in earth connection.

Interior fittings Shelves, made of zinc plated sheet steel, height a djustable in 76 mm increments, max. shelf load 159 kg. Base sump tray, seamlessly welded. Blue cupboards with additional PE tray for use as sump tray on shelves or in base.

Cupboards with manual doors The simple and cost effective solution. With manually operated doors. Doors open up to 180° for optimum access. When the door is manually closed, the three point lock is automatically activated.

Cupboards with self-closing doors

from RON

4900.00

Model Height x width x depth

1118 x 1092 x 457

1651 x 1092 x 457

1651 x 864 x 864

1651 x 1092 x 864

manual

self-closing

manual

self-closing

manual

self-closing

manual

self-closing

1 20

2 20

2 31.5

2 40.6

kg Ref. RON Ref. RON

87.4 424 744-1E 4900.00 424 745-1E 6730.00

101 424 746-1E 7480.00 424 747-1E 5880.00

120.06 424 748-1E 7130.00 424 750-1E 7730.00

137 424 751-1E 8380.00 424 752-1E 6630.00

166 424 753-1E 8480.00 424 754-1E 7380.00

150.18 424 755-1E 9130.00 424 756-1E 10950.00

218 711 041-1E 10450.00

219 711 042-1E 11750.00

Ref. RON Ref. RON

516 569-1E 340.00 516 571-1E 1180.00

516 569-1E 340.00

516 569-1E 340.00 516 571-1E 1180.00

516 569-1E 340.00

516 572-1E 645.00 516 573-1E 1500.00

711 043-1E 795.00

Door version

Number of shelves Base sump tray capacity Weight yellow blue Accessories Shelf for yellow cupboards Shelf for blue cupboards

ENVIRONMENT

All FM cupboards on this page These cupboards are not approved for the storage of flammable media in Germany, Switzerland, Austria, the Netherlands, Belgium, and Luxembourg. Please observe the regulations and requirements binding for your country. Please contact your responsible authority to determine approval for your application.

Document boxes

The safest solution for employees and rescue personnel in case of fire. Automatic self-closing doors (door soldering melts at 74 °C – open doors close automatically). Door stop system for easy storage and removal.

Made of sturdy polyethylene • Documents remain on site – visible, protected and clean • Space for labelling Ideal for data sheets, regulations, pull lists, etc. Easily mounted using high strength adhesive film (included) or screws.

Cupboards in assorted colours Colour coding for identification of the media stored inside, for example ... Yellow cupboards Water hazardous media Blue cupboards Corrosive media such as acids, alkalis etc.

Shelf dividers For orderly storage in cupboards. Simply place on cupboard shelf. For all 457 mm deep FM cupboards. Sheet steel, powder coated yellow. Pack of 4.

23084

Ref. 710 115-1E YELLOW = Ex stock

RON / pack 450.00

Telefon 0250 702 110 service@kaiserkraft.ro

Opening

top

front

Lock type

without lock

fittings for padlock

Height x width x depth

318 x 260 x 57

400 x 333 x 90

Internal dimensions H xWxD

292 x 222 x 41

337 x 273 x 57

983 741-1E 325.00

983 742-1E 525.00

Ref. RON

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

423

FM safety small cupboards For the storage of flammable and water hazardous liquids according to FM (please observe country-specific regulations)

• Effective storage directly at the workstation • Quick, direct access to frequently used media

1 Tabletop cupboards, single door Base sump tray capacity 6 litres. Not FM tested.

2 Base cupboards, single door

Base sump tray capacity 10 litres.

3 Base cupboards, double doors

Base sump tray capacity 18.5 litres.

All models with one adjustable shelf, additional shelves available as an accessory.

Please note

Model Height x width x depth Door version Weight Ref. RON Accessories Shelf

1 mm

559 x 432 x 432 manual self-closing

889 x 591 x 457 manual self-closing

889 x 889 x 559 manual self-closing

24.58 424 758-1E 3100.00

26.76 424 760-1E 3750.00

59 424 762-1E 3800.00

59 424 764-1E 4350.00

73.94 424 767-1E 6630.00

69 424 769-1E 7130.00

Ref. RON

516 574-1E 190.00

516 576-1E 250.00

516 578-1E 365.00

All FM cupboards on this page These cupboards are not approved for the storage of flammable media in Germany, Switzerland, Austria, the Netherlands, Belgium, and Luxembourg.

All FM cupboards on this page have the same features as described on page 423.

Fire resistant hazardous goods wall-mounted cupboards type 30 For regulation compliant storage of small quantities of flammable liquids in workshops in accordance with EN 14470-1 and TRGS 510 • Flammable liquids such as spray cans, paints, etc. can be stored safety directly at the workstation – e.g. above the worktop • Quick access – saves time and ensures safety at the workplace • Proven protection against fire for 30 minutes, GS tested • Ventilation connection (DN 75) in the roof of the cupboard • Steel frame for wall mounting and fastening material included

Body and doors in charcoal RAL 7016. Two self-closing hinged doors. 5 litre capacity sump. Empty weight 77 kg – please observe.

1 Without lock

Not lockable. Fitting a lock at a later stage not possible.

2 With lock

Can be locked with a profile cylinder lock.

Accessories

Model

23085

424 www.kaiserkraft.ro

Height x width x depth Internal dimensions H x W x D Ref. RON Accessories Shelf

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

mm mm

482 x 995 x 470 414 x 942 x 419 118 465-1E 6630.00

482 x 995 x 470 414 x 942 x 419 118 466-1E 7130.00

Ref. RON

118 468-1E 450.00

BLUE = Short delivery period

23085

Shelf made of sheet steel, max. load 75 kg.

Suitable air filtration modules can be found on page 428.

Fire resistant hazardous goods storage cupboards, type 90 For the storage of flammable media in laboratories in accordance with DIN EN 14470-1 and TRGS 510 (appendix 3) • P roven protection against fire for 90 minutes, GS tested • As standard with door stop system for easy storage and removal – doors close automatically in the event of fire • Locking system compatible, lockable with cylinder profile • Adjusting device for levelling on uneven flooring • Ventilation connection (DN 75) in the roof

Height x width x depth Internal dimensions H x W x D Weight Door version Number of shelves Body colour

mm mm kg

Design of interior fittings powder coated stainless steel Accessories Perforated metal cover for base sump

powder coated stainless steel

23086

Additional shelf

Quality German product. Plastic coated fine sheet steel, fire insulation, high quality door seals. Labelling in accordance with DIN EN 14470-1.

powder coated stainless steel

YELLOW = Ex stock

1298 x 600 x 615 1070 x 450 x 520 191 1 door 1 door 2 2 golden yellow light grey RAL RAL 1004 7035

Ventilation kit

Double door cupboards with manual doors Interior fittings Shelves, height adjustable in increments of 32 mm, max. load 75 kg (distributed load), with pull-out stops and anti-tipping device. Base sump tray tested in acc. with StawaR / manufacturer's declaration of conformity. Stainless steel interior fittings Base sump tray tested in acc. with StawaR / manufacturer's declaration of conformity and with shelves made of stainless steel. Ideal for storing hazardous substances which corrode paint, such as acetone and thinners.

1298 x 1200 x 615 1070 x 1050 x 520 314 2 doors 2 doors 2 2 golden yellow light grey RAL RAL 1004 7035

1968 x 600 x 615 1740 x 450 x 520 269 1 door 1 door 3 3 golden yellow light grey RAL RAL 1004 7035

For regulation compliant ventilation of safety cupboards (gases, vapours, aerosols and odours) • Up to 120-fold air exchange in the cupboard • Ready to use – easy assembly ATEX compliant: CE II 3/- G c T4 Noise level 35 dB(A) Connection DN 75 Connection to an on-site ventilation system required! Ref. 752 500-1E RON 4000.00

1968 x 900 x 615 1740 x 750 x 520 352 2 doors 2 doors 3 3 golden yellow light grey RAL RAL 1004 7035

1968 x 1200 x 615 1740 x 1050 x 520 429 2 doors 2 doors 3 3 golden yellow light grey RAL RAL 1004 7035

Ref. RON Ref. RON

917 423-1E 12750.00 917 434-1E 13950.00

917 424-1E 12750.00 917 436-1E 13950.00

917 421-1E 14950.00 917 432-1E 16450.00

917 422-1E 14950.00 917 433-1E 16450.00

917 418-1E 13450.00 917 430-1E 14450.00

917 420-1E 13450.00 917 431-1E 14450.00

917 416-1E 14950.00 917 428-1E 16750.00

917 417-1E 14950.00 917 429-1E 16750.00

917 414-1E 15750.00 917 425-1E 17950.00

917 415-1E 15750.00 917 426-1E 17950.00

Ref. RON Ref. RON Ref. RON Ref. RON

516 567-1E 340.00 516 568-1E 675.00 917 483-1E 215.00 917 488-1E 425.00

516 563-1E 400.00 516 564-1E 895.00 917 481-1E on request 917 485-1E 695.00

516 567-1E 340.00 516 568-1E 675.00 917 483-1E 215.00 917 488-1E 425.00

516 565-1E 400.00 516 566-1E 895.00 917 438-1E 290.00 917 442-1E 695.00

516 563-1E 400.00 516 564-1E 895.00 917 481-1E on request 917 485-1E 695.00

Telefon 0250 702 110 service@kaiserkraft.ro

ENVIRONMENT

All cupboards on this page

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

425

Video

Suitable air filtration and ventilation kits can be found on pages 425 and 428.

ONLINE!

1 4

Please order adjusting device incl. plinth cover plate (accessory) separately

2 3

All cupboards on this page

Optionally with sheet steel door or vision panel door

Fire resistant hazardous goods storage cupboards, type 30 For regulation compliant storage of flammable media in laboratories in accordance with EN 14470-1 and TRGS 510, appendix 3 (type 30)

1, 2, 4 With sheet steel doors

Accessories and options

• Seven door colours available at no extra cost – see table

Adjusting device For levelling on uneven surfaces. Including plinth cover plate to hide the forklift accessible plinth. Cannot be fitted at a later stage, please include with your order.

Ventilation connection (DN 75) in the roof for connection to a forced ventilation unit. Labelled in accordance with EN 14470-1.

3 With vision panel doors

Interior fittings – 3 shelves, max. load 75 kg each (distributed load), height adjustable in 32 mm increments – 1 base sump tray, tested in acc. with StawaR / manufacturer's declaration of conformity, including perforated metal cover Delivered to the point of use (at extra cost) – please call for details.

Sheet steel doors with structured powder coating. Body made of flame retardant, melamine coated special panels in charcoal, similar to RAL 7016.

• Required hazardous goods immediately visible even with door closed • No unnecessary searching – saves time • Ideal for set-up in sales showrooms, material distribution, etc. Sheet steel doors with fireproof glass insert EI 30 in compliance with EN 13501-2. Body made of flame retardant, melamine coated special panels in charcoal, similar to RAL 7016.

Ref. 711 015-1E

Door version

23087

426 www.kaiserkraft.ro

Not approved for use in Austria. Please observe the regulations binding for your country.

RON / pack 875.00

1 door

2 doors

Height x width x depth

1947 x 564 x 620

1947 x 864 x 620

1947 x 1164 x 620

Internal dimensions H x W x D

1626 x 450 x 519

1626 x 750 x 519

1626 x 1050 x 519

166

208

226

259

Ref. Ref. Ref. Ref. Ref. Ref. Ref. RON

111 711-1E 111 712-1E 111 714-1E 111 715-1E 111 717-1E 111 718-1E 111 713-1E 9880.00

122 508-1E 122 510-1E 122 511-1E 122 509-1E 122 514-1E 122 512-1E 122 507-1E 11250.00

290 448-1E

118 467-1E 16950.00

111 719-1E 111 720-1E 111 722-1E 111 723-1E 111 725-1E 111 726-1E 111 721-1E 12750.00

Ref. RON Ref. RON

917 483-1E 215.00 111 734-1E 440.00

917 438-1E 290.00 122 515-1E 475.00

917 481-1E on request 111 735-1E 475.00

Ref. RON

711 023-1E on request

711 022-1E on request

711 021-1E on request

Type Weight Door colour light grey RAL 7035 gentian blue RAL 5010 reseda green RAL 6011 traffic red RAL 3020 pure white RAL 9010 white aluminium, similar to RAL 9006 golden yellow RAL 1004 Accessories and options Additional shelf

Type -30 cupboards have limited approval for the storage of flammable media in Germany (TRGS 510), Switzerland, the Netherlands, Belgium, and Luxembourg.

Transport dollies The 2-door cupboards can be rolled through DIN-standard doors, lengthwise in an upright position. H x W x D 130 x 140 x 600 mm. Pack of 2.

Adjusting device Extra service Delivered to point of use Extra cost

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

BLUE = Short delivery period

23087

• Integrated, forklift accessible plinth for easy, internal transport • Doors lock at any angle – open doors close automatically in case of fire • Doors lockable with cylinder lock (locking system compatible) • Proven protection against fire for 30 minutes, type-tested, GS tested

Video

ONLINE!

Integrated forklift accessible plinth

Transport dollies (accessory)

Fire resistant industrial hazardous goods cupboards, type 90 The next generation of cupboards for the storage of flammable media in work rooms in accordance with DIN EN 14470-1 and TRGS 510 (appendix 3) • P roven protection against fire for 90 minutes, GS tested • Extremely robust, durable construction with maximum torsion resistance • Durable textured powder coating • Choice of seven door colours • Permanently integrated, forklift a ccessible plinth – for easy transport of the cupboard • Tamper-proof lock with lock status indicator, can be integrated with lock system • Hinged door can be locked in any position • Adjustable door dampening m echanism • Closes automatically in the event of fire

Made of quality sheet steel with resistant, textured powder coating. Body in charcoal RAL 7016. Adjustable feet for levelling on uneven surfaces. Fire insulation and high quality door seals. Ventilation connection (DN 75) in the roof. Labelling in accordance with EN 14470-1. Interior fittings 3 shelves, max. load 75 kg (for evenly distributed loads), height adjustable in 32 mm increments, with pull-out stops and anti-tipping device. 1 base sump tray, tested in acc. with S tawaR / manufacturer's declaration of conformity. Powder coated sheet steel. Delivered to the point of use (at extra cost) – please call for details.

Accessories Plinth cover plate To cover the forklift accessible plinth. Transport dollies Cupboards can be rolled through doors lengthwise in an upright position. Length x width x height 140 x 600 x 140 mm. Pack of 2.

Door version Height x width x depth Internal dimensions H x W x D Weight Door colour light grey RAL 7035 golden yellow RAL 1004 traffic red RAL 3020 gentian blue RAL 5010 reseda green RAL 6011 pure white RAL 9010 white aluminium, similar to RAL 9006

23088

1 door

2 doors

1955 x 600 x 615 1645 x 450 x 522 288

1955 x 900 x 615 1645 x 750 x 522 378

1955 x 1200 x 615 1645 x 1050 x 522 456

Ref. Ref. Ref. Ref. Ref. Ref. Ref. RON

711 007-1E 711 008-1E 711 009-1E 711 010-1E 711 011-1E 711 013-1E 711 014-1E 14450.00

710 999-1E 711 000-1E 711 001-1E 711 002-1E 711 003-1E 711 005-1E 711 006-1E 18250.00

710 992-1E 710 993-1E 710 994-1E 710 991-1E 710 995-1E 710 996-1E 710 998-1E 17950.00

Ref. RON Ref. RON Ref. RON / pack

917 483-1E 215.00 711 018-1E 180.00

917 438-1E 290.00 711 017-1E 200.00 711 015-1E 875.00

917 481-1E on request 711 016-1E 245.00 711 015-1E 875.00

Ref. RON

516 567-1E 340.00

516 565-1E 400.00

516 563-1E 400.00

Extra service Delivered to point of use

Ref.

711 023-1E

711 022-1E

711 021-1E

Extra cost

RON

on request

Accessories Additional shelf Plinth cover plate

Perforated metal cover for base sump

YELLOW = Ex stock

All cupboards on this page

mm mm kg

Transport dollies, pack of 2

Suitable air filtration modules and ventilation kits can be found on pages 425 and 428.

ENVIRONMENT

Lock status indicator

Telefon 0250 702 110 service@kaiserkraft.ro

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

427

Fire resistant industrial hazardous goods cupboards, type 90

All cupboards on this page

Hinged and folding door cupboards for the storage of flammable media in work rooms in accordance with EN 14470-1 and TRGS 510 • Proven protection against fire for 90 minutes, GS tested • Extremely robust, durable construction • Permanently integrated, forklift accessible plinth for quick, convenient relocation • Adjusting device for levelling on uneven flooring

1 Cupboards with hinged doors

Video

With self-closing doors which can be opened with one hand • Open both doors at the same time with one hand • Ergonomic – doors open with almost no effort at all • Doors close automatically after 60 seconds – audible and optical signal before doors close • Doors always stay closed – for constantly effective ventilation in the cupboard with forced ventilation • Doors close automatically in the event of fire

General product information can be found on page 427.

ONLINE! 1 Q-PEGASUS-90 hinged door cupboard

2 Cupboards with folding doors

2 Q-PHOENIX-90 folding door cupboard

Height x width x depth

1955 x 1200 x 615

Height x width x depth

1955 x 1200 x 615

Internal dimensions H x W x D

1645 x 1050 x 520

Internal dimensions H x W x D

1645 x 1050 x 520

Weight Number of shelves

459 3

503 –

535 –

Weight Number of shelves

–

Ref. Ref. RON

116 089-1E 116 090-1E 17250.00

116 091-1E 116 093-1E 20450.00

116 094-1E 116 095-1E 22750.00

Number of drawers Door colour yellow, RAL 1004 grey, RAL 7035

Ref. RON Ref.

917 481-1E on request 516 563-1E

Delivered to point of use

RON Ref.

400.00 711 021-1E

711 021-1E

Extra cost

RON

on request

Number of drawers Door colour yellow, RAL 1004 grey, RAL 7035 Accessories / extra service Additional shelf Perforated metal cover for base sump

456 3

500 –

532 –

–

Ref. Ref. RON

116 082-1E 116 083-1E 17250.00

116 085-1E 116 086-1E 20450.00

116 087-1E 116 088-1E 22950.00

Ref. RON Ref.

917 481-1E on request 516 563-1E

Delivered to point of use

RON Ref.

400.00 711 021-1E

711 021-1E

Extra cost

RON

on request

Accessories / extra service Additional shelf Perforated metal cover for base sump

Q-PEGASUS hinged door cupboard available in five additional door colours without extra cost – please enquire.

• Space saving folding doors for optimum freedom of movement in front of the cupboard when the doors are open • Doors close independently of one another • Door stops for easy storage and removal – self-closing in the event of fire

Interior fittings With shelves. Shelves are height adjustable in 32 mm increments. Max. load 75 kg each (evenly distributed load). Base sump tray tested in acc. with StawaR / manufacturer's declaration of conformity. Powder coated sheet steel. With drawers. Optimum utilisation of storage space, utmost in convenience. Drawers with full extension, can be stopped in any position. Self-retracting in the event of fire. Max. load 60 kg per drawer (evenly distributed load). Powder coated sheet steel. Base sump tray tested in acc. with StawaR / manufacturer's declaration of conformity.

Suitable for the safety c up boards on pages 425 - 429.

428 www.kaiserkraft.ro

• Easily ventilate cupboards – without exhaust pipes • Enables flexible placement of cupboards • No areas at risk of explosion around the cupboard • Quiet operation – only 39 dB(A) • ATEX compliant: Ex II 3/- G Ex ic nA IIB T4 Gc • Exhaust and filter monitoring with visual and audible alarm

Forced ventilation of vapours and odours. Cupboard air is filtered and blown into the room – uncomplicated installation, no exhaust pipes or wall openings required. Active protection of personnel – reliable containment of hazardous fumes (> 99.999 % of fumes from solvents). Sheet steel housing. Painted light grey RAL 7035, cover in charcoal RAL 7016. Ref. 977 925-1E RON 9880.00

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

On-site service with filter change and disposal on request. BLUE = Short delivery period

23089

Air filtration units for hazardous goods cupboards

Manufacture’s declaration of conformity (ÜHP) in accordance with German construction regulation list A part 1, DIBt, Berlin

Lock status indicator

Suitable air filtration and ventilation kits can be found on pages 425 and 428.

Type 30 and type 90 fire resistant hazardous goods storage cupboards

1 Type 30

2 Type 90

For restricted storage of flammable media in work rooms (TRGS 510, appendix 3) • Fireproof for 30 minutes

For regulation compliant storage of flammable media in laboratories in accordance with DIN EN 14470-1 and TRGS 510 (appendix 3)

Sheet steel door with textured powder coating, light blue RAL 5012. Body made of flame retardant, special melamine coated panels, charcoal similar to RAL 7016.

For the unrestricted storage of flammable media in work rooms (TRGS 510, appendix 3) • Fireproof for 90 minutes • Lock status indicator (red / green) • Adjusting device for levelling on uneven surfaces, including plinth cover plate to hide the forklift a ccessible plinth

• P roven protection against fire, type-tested, GS tested • Robust, durable construction, doors hinged at 3 points • Doors lock in any position – open doors close a utomatically in case of fire • Permanently integrated, forklift accessible plinth – for quick and easy transport of the cupboard • Doors lockable with cylinder lock (locking system compatible) Fire insulation and high quality door seals. Connection (DN 75) for forced ventilation in the roof. Labelled in accordance with EN 14470-1. Interior fittings – 3 shelves, max. load 75 kg each (distributed load), adjustable in 32 mm increments – 1 base sump tray, tested in acc. with StawaR / manufacturer's declaration of conformity, including perforated metal cover Sump capacity: 1-door 22 litres / 2-door 33 litres Delivered to the point of use (at extra cost) – please call for details.

Extremely robust, durable and torsion resistant construction. Made of sheet steel with resistant, textured powder coating. Door in light blue RAL 5012, body in charcoal RAL 7016. Adjustable door dampening mechanism. Type 30 cupboards have limited approval for the storage of flammable media in Germany (TRGS 510), Switzerland, the Netherlands, Belgium, and Luxembourg. Not approved for use in Austria. Please observe the regulations binding for your country.

Type Door version Height x width x depth Internal dimensions H x W x D Weight Body / door colour charcoal RAL 7016 / light blue RAL 5012

23090

Extra service Delivered to point of use Extra cost

YELLOW = Ex stock

Transport dollies The 2-door cupboards can be rolled through DIN-standard doors, lengthwise in an upright position. H x W x D 130 x 140 x 600 mm. Pack of 2.

Ref. 711 015-1E

Accessories Additional shelf

All cupboards on this page

ENVIRONMENT

Telefon 0250 702 110 service@kaiserkraft.ro

mm mm kg

RON / pack 875.00

Type 30

Type 90

1 door 2 doors 1947 x 564 x 620 1947 x 1164 x 620 1626 x 450 x 519 1626 x 1050 x 519 166 259

1 door 2 doors 1955 x 600 x 615 1955 x 1200 x 615 1645 x 450 x 522 1645 x 1050 x 522 289 458

Ref. RON

111 729-1E 11450.00

111 730-1E 13750.00

111 731-1E 14950.00

111 733-1E 18750.00

Ref. RON

111 808-1E 185.00

917 491-1E 190.00

111 808-1E 185.00

917 491-1E 190.00

Ref. RON

711 023-1E on request

711 021-1E on request

711 023-1E on request

711 021-1E on request

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

429

Many other laboratory and cleanroom items can be found in our online shop.

Laboratory and cleanroom furnishings For production, workshops, development, laboratories Choose components from our large range of standard products, or have your very own laboratory or cleanroom planned and configured by us.

1 4 Chemicals laboratory cupboards

Ref. 946 438-1E

1 Laboratory cupboards for acids

and alkalis

Regulation compliant storage of corrosive substances, chemicals, acids and alkalis in work rooms • Stable drawers with trays with removable plastic trays • Separate storage of acids and alkalis • Highly effective ventilation (intake/extraction) • Doors can be locked separately with cylinder lock

5 2 Stainless steel cleanroom

23080

Height x width x depth 1970 x 1200 x 605 mm. Ref. 606 408-1E

RON 18750.00

430 www.kaiserkraft.ro

chairs

• Resistant to high temperatures, humidity and detergents • For the highest requirements in terms of decontamination • Ideal for pharmaceutical technology, microbiology etc. 1.5 mm 1.4301 stainless steel (V2A) worktop with 10/15 mm perforations. Table height 900 mm. Legs made of rectangular tubular steel, 40 x 40 mm. Height adjustable round feet to compensate for uneven flooring. Overall width

1600

1800

Overall depth

700

Overall height

900

611 765-1E 4650.00

611 768-1E 4800.00

Ref. RON

For class 1 cleanrooms Ergonomically shaped seat and back rest, infinitely adjustable height and depth. DIN 68877 compliant. Back rest 430 mm high. Sealed seat upholstery with electrically conductive vinyl cover, in black. Non-slip, even with smooth cleanroom clothing. Sturdy, low profile, five-star polished aluminium base with castors. All plastic parts are light grey.

Height adjustment range

470 – 610

permanent contact mechanism

Ref. RON Ref.

517 319-1E 2300.00 517 322-1E

RON

2800.00

permanent contact mechanism and adjustable seat inclination

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

5 Stainless steel laboratory table trolleys

Made of chrome nickel steel, suitable for foodstuffs. 2 sound absorbing shelves. Max. load 80 kg each. 4 stainless steel swivel castors, 2 with wheel stops, wheel Ø 125 mm. Overall max. load 120 kg. Shelf 800 x 500 mm, platform clearance 585 mm. Height x width x depth 870 x 570 x 950 mm. Supplied flat pack – easy self-assembly. Ref. 604 943-1E RON 1650.00 BLUE = Short delivery period

23080

Connection to technical ventilation with 30-fold air change mandatory. Connection in roof. Labelling in accordance with German hazardous goods directive.

3 Cleanroom industrial swivel

tables

Body made of specially designed, highly resistant panels. Exterior also clad with powder coated fine sheet steel. With floor level adjustment screws. Interior fittings 12 fully extendable PE trays, general certification from the DIBt Berlin (German Institute for Construction Technology). Each with 15 litre capacity. Max. load 25 kg each (with evenly distributed load).

RON 6880.00

Product description and more versions can be found in the online shop.

Eye wash equipment • EN 15154-4 compliant • Fast and easy to use • Bottle with ergonomically shaped eye cup and dust cap • Unopened bottles have a 3-year shelf life • No maintenance or cleaning required

2 Sterile phosphate buffer solution

4.9%, pH-neutral, for neutralising acids and many alkaline substances when there is a risk of chemical burns. Contents 3 x 200 ml, each for approx. 2 min. rinsing time. Ref. 111 607-1E

1 + 2 Bottle for individual use and for refilling the emergency wall box.

RON / pack 235.00

3 Emergency wall box 1 Sterile sodium chloride s olution 0.9% sodium chloride solution to rinse out foreign particles. Scope of delivery

3 x 200 ml

3 x 500 ml

2 min

5 min

Rinsing time per bottle approx. Ref. RON / pack

111 605-1E 175.00

111 606-1E 235.00

Dust-protected wall box with eye rinse first aid symbol and mirror. Height x width x depth 270 x 225 x 110 mm. 2 bottles included, choose from... 1 x 500 ml sodium chloride solution and 1 x 200 ml phosphate buffer solution Ref. 111 608-1E RON 365.00

2 x 500 ml sodium chloride solution Ref. 111 609-1E RON 340.00

Emergency eye and body showers Effective first aid for foreign particles in the eye, burns, irritations, scalding etc.

All emergency showers in red or green

High quality stainless steel shower body (one-hand eye shower made of brass) Connects to an existing cold drinking water supply Compliant with EN 15154-1/2 and DIN 12899, including information signs Shower heads with large area water dissipation and soft water jet Rubber caps around the spray heads of the eye showers protect against injuries

ENVIRONMENT

• • • • •

Chemical resistant powder coating in red or green. Basins, activation plate, lever joint, dust protection cap made of robust plastic.

4 2 1 1 Hand eye shower

2 Eye shower with basin

Easy to use – dust protection cap falls off when activated. Handle lock, the valve remains open after activation. Hose sheathed in stainless steel, length 1.5 m. With bracket for wall mounting.

High quality stainless steel basic. Dust protection caps on the spray heads fall off when activated. Large activation plate for easy o peration. Large space between spray heads. For wall mounting.

Model Height x depth Thread Water flow Pressure red green

3 Body emergency shower

and two spray heads

with one spray head

23091

mm inch l/min bar Ref. Ref. RON

YELLOW = Ex stock

Fast first aid, rinsing of the person with high water output, for injuries over larger areas of the body. Easy activation with pull cable. Maintenance free stainless steel ball valve. For space saving wall mounting.

260 x 75 1/2 6 2–6 177 085-1E 177 084-1E 1150.00

260 x 395 1/2 12 2–6 177 087-1E 177 086-1E 1850.00

600 x 685 1 30 2–6 177 092-1E 177 090-1E 2150.00

2230 x 855 1 30 4–6 177 089-1E 177 088-1E 5980.00

Telefon 0250 702 110 service@kaiserkraft.ro

4 Body and eye

emergency shower

Central first aid Space saving combination of eye shower and body shower. Body shower is activated by a pull cable. The eye shower can be activated using both an activation plate and by pedal. For stable floor mounting.

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

431

Many additional types of absorbent sheeting can be found in our online shop.

Absorbent sheeting Effective absorption and containment of spillages – preventively or in emergencies • Extremely absorbent – minimal consumption • Dust free, hardwearing, tear resistant, highly absorbent • Made of 100% polypropylene – simple and cost effective to dispose of

Formats Sheets Perforated in centre. Rolls – Width 400 mm: perforated every 500 mm –W idth 800 mm: perforated every 500 mm across and down the centre

Liquids to be absorbed / versions

Application / grades

Oil (blue) For oil, petrol, diesel etc. Water repellent, floats on water. Ideal for separating oil/water. Universal (grey) For coolants, solvents, lubricants, paints, oils, water, weak chemicals etc. (absorbs all liquids). Chemicals (yellow) For acids, alkaline solutions, corrosive media, alcohol etc.

1 FIRST – 1-ply

3 PRO – 3-ply

For basic or single use. Ideal for emergencies and under machines. Open, absorbent fine fibre texture on both sides. Medium for small quantities of liquid. Heavy for large quantities of liquid.

For prolonged, heavy duty use and fuzz free applications, e.g. for cleaning parts. Reinforced at top and bottom – hardwearing on both sides, fuzz free and smooth, very durable, highly absorbent, tear resistant.

Please request a free sample of absorbent sheeting for testing. Please specify model: oil, universal or chemicals.

4 PRO Plus – 3-ply

2 BASIC – 2-ply

Ideal as a work mat, in front of machines, as a mat in walkways. Can be walked on and driven on. Additionally reinforced at top – hardwearing, fuzz free and smooth, impermeable underside, non-slip film.

Ideal as a work mat, under machines and for spillage emergencies. For standard duty applications. Highly absorbent. Reinforced at top – hardwearing, fuzz free and smooth. Open, absorbent fine fibre texture on bottom.

1 FIRST absorbent sheeting Format

Sheeting grade Width x length

sheets

medium

400 mm x 500 mm

200

l/pack 144

heavy

400 mm x 500 mm

100

113

medium

400 mm x 60 m

173

800 mm x 60 m

173

400 mm x 40 m

180

800 mm x 40 m

180

rolls

heavy

Absorption

Pack of

Ref. RON / pack Ref. RON / pack Ref. RON / pack Ref. RON / pack Ref. RON / pack Ref. RON / pack

oil

universal

chemicals

blue 123 198-1E 595.00 123 199-1E 475.00 123 204-1E 695.00 123 203-1E 695.00 123 205-1E 745.00 123 206-1E 745.00

grey 123 236-1E 595.00 123 237-1E 490.00 123 241-1E 725.00 123 240-1E 725.00 123 243-1E 795.00 123 244-1E 795.00

yellow 123 214-1E 645.00 123 215-1E 500.00 123 220-1E 745.00 123 219-1E 745.00 123 221-1E 825.00 123 222-1E 825.00

oil

universal

chemicals

blue 123 201-1E 575.00 123 202-1E 645.00 123 208-1E 895.00 123 207-1E 895.00 123 210-1E 975.00 123 209-1E 975.00

grey 123 238-1E 575.00 123 239-1E 675.00 123 246-1E 945.00 123 245-1E 945.00 123 248-1E 1100.00 123 247-1E 1080.00

yellow 123 216-1E 695.00 123 217-1E 775.00 123 224-1E 1100.00 123 223-1E 1100.00 123 227-1E 1230.00 123 225-1E 1230.00

Ref.

RON / pack

123 232-1E 123 233-1E 123 235-1E

625.00 1380.00 1380.00

2 + 3 BASIC / PRO absorbent sheeting

Format

sheets

rolls

Width x length

Pack of

BASIC

400 mm x 500 mm

100

l/pack 101

PRO

400 mm x 500 mm

100

BASIC

400 mm x 40 m

162

800 mm x 40 m

162

400 mm x 40 m

153

800 mm x 40 m

153

PRO

Absorption

Ref. RON / pack Ref. RON / pack Ref. RON / pack Ref. RON / pack Ref. RON / pack Ref. RON / pack

4 PRO Plus absorbent sheeting with barrier film

23092

2+3

432 www.kaiserkraft.ro

Not perforated – for cutting to size Format

Type

Width x length

Pack of

Absorption

sheets rolls

universal universal universal

400 mm x 500 mm 400 mm x 30 m 800 mm x 30 m

50 2 1

l/pack 43 103 103

23092

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

BLUE = Short delivery period

Absorbent socks and cushions

Emergency leakage sets in carry bags

• Extremely absorbent and fl exible • 100 % PP fleece-fibre filling

Transparent bag with handle and zip.

1 Absorption 20 litres

Absorbent socks To place around machines, drums etc., and as a preventive measure to contain leaks. Absorbent cushions To place under leaking pipes, machines etc., and for the a bsorption of larger quantities of liquid.

Contents – 32 fleece towels, 300 x 300 mm – 1 absorbent sock, Ø 75 mm x 1.2 m – 5 cleaning cloths – 2 disposal bags – 1 pair of gloves

2 Absorption 50 litres Contents – 35 fleece towels, 400 x 500 mm – 3 absorbent socks, Ø 75 mm x 1.2 m – 10 cleaning cloths – 2 disposal bags – 1 pair of gloves

Type

Width x length

Pack of

Absorbent socks

Ø 75 mm x 1.2 m

l/pack 80

Ø 75 mm x 3m

400 mm x 400 mm

110

Absorbent cushions

Ref. RON / pack Ref. RON / pack Ref. RON / pack

oil

universal

chemicals

blue 123 211-1E 475.00 123 212-1E 475.00 123 197-1E 545.00

grey 123 251-1E 500.00 123 252-1E 500.00 123 230-1E 575.00

yellow 123 228-1E 545.00 123 229-1E 545.00 123 213-1E 595.00

1 Model

1 2

Length x width x height

Absorption

mm 320 x 1320 x 150

l 20

600 x 200 x 400

Ref. RON Ref. RON

2 oil

universal

chemicals

blue 457 226-1E 275.00 123 253-1E 390.00

grey 457 227-1E 300.00 123 257-1E 415.00

yellow 457 228-1E 315.00 123 255-1E 440.00

Emergency leakage sets in mobile plastic containers Black with 2 wheels, lid and handle. Contents – 35 fleece towels, 400 x 500 mm – 3 absorbent socks, Ø 75 mm x 1.2 m – 1 absorbent sock, Ø 75 mm x 3.0 m – 2 absorbent cushions, 400 x 400 mm – 10 cleaning cloths – 2 disposal bags – 1 pair of gloves

2 Plastic roll container Green with 4 wheels and lid. Contents – 100 fleece towels, 400 x 500 mm – 2 absorbent socks, Ø 75 mm x 1.2 m – 2 absorbent socks, Ø 75 mm x 3.0 m – 2 absorbent cushions, 400 x 400 mm – 20 cleaning cloths – 5 disposal bags – 1 pair of gloves

ENVIRONMENT

1 Plastic box

3 Plastic drum Yellow with 2 wheels and lid. Contents – 100 fleece towels, 400 x 500 mm – 2 absorbent socks, Ø 75 mm x 1.2 m – 2 absorbent socks, Ø 75 mm x 3.0 m – 1 x 20 kg sack of universal absorbent granulate, type III R “fine” (grain size 0.6 – 1.2 mm) – 1 x 10 kg sack of universal absorbent granulate, type III R “extra fine” (grain size 0.3 – 0.9 mm) – 1 broom and dustpan set – 25 cleaning cloths – 10 disposal bags – 1 pair of gloves

4 Maintenance/emergency trolley

23078

Yellow with fleece roll dispenser, 1 door with lock, 1 shelf, 2 fixed castors and 2 swivel castors with wheel stops, handle. Ideal for maintenance work or in the event of spillage emergencies.

YELLOW = Ex stock

3 Other products

ONLINE!

1 Contents – 150 fleece towels, 400 x 500 mm – 1 fleece roll, 400 mm x 40 m – 3 absorbent socks, Ø 75 mm x 1.2 m – 2 absorbent socks, Ø 75 mm x 3.0 m – 2 absorbent cushions, 400 x 400 mm – 30 cleaning cloths – 15 disposal bags – 2 pairs of gloves – 2 pairs of safety glasses

Model

Length x width x height

Absorption

mm 800 x 430 x 380

l 75

840 x 660 x 600

150

570 x 730 x 1060

200

720 x 640 x 1520

300

Telefon 0250 702 110 service@kaiserkraft.ro

Ref. RON Ref. RON Ref. RON Ref. RON

oil

universal

chemicals

blue 123 254-1E 1080.00 123 564-1E 1850.00 457 229-1E 1950.00 123 615-1E 6480.00

grey 123 258-1E 1050.00 123 570-1E 1900.00 457 230-1E 2000.00 123 620-1E 6480.00

yellow 123 256-1E 1130.00 123 567-1E 1950.00 457 231-1E 2050.00 123 618-1E 6630.00

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

433

Many more spill containment products can be found in our online shop.

Universal absorbent concentrate For virtually all liquids and every floor

General purpose binding granulate, type III R

• Particularly suitable for thicker m aterials, such as resin, paint, varnish etc. • Fast absorption: spread – collect – dispose of • TÜV tested • 100 litres of concentrate weighs only 15 kg

Extremely absorbent 1 kg granulate absorbs 8.4 kg oil, 14 kg of caustic soda or 9.7 kg of sulphuric acid. Available as sacks of granulate for spreading, or as absorbent sheeting in the form of absorbent socks or cushions for universal use.

For interior and exterior use – DEKRA tested • Binds oil, varnish, alkaline solutions, acids, biodiesel • No clumping and clogging – easy to sweep up after a short absorption time • Low weight ensures optimal handling – precise dispensing 1 sack (12 kg or 40 litres) is sufficient for approx. 15 m² and absorbs approx. 12 litres of oil. Approved for use on traffic surfaces contaminated with oil.

Pack Absorption of

Type

Weight

Contents Width x length

Granulate in sack

16 kg 16 kg 16 kg 12 kg 12 kg 12 kg

10 l 50 l 100 l – – –

Ref.

l/pack

RON / pack

432

741 070-1E 440.00 741 072-1E 3400.00

Absorbent socks Absorbent cushions

– – – Ø 75 mm x 1.2 m Ø 75 mm x 3 m 300 mm x 300 mm

Pack Absorption of l/pack 10 145 2 145 1 145 24 93 8 82 40 68

Ref.

RON / pack

741 138-1E 741 139-1E 741 141-1E 741 142-1E 741 143-1E 741 145-1E

675.00 390.00 340.00 1250.00 1100.00 1750.00

Flexible barrier systems Protection from escaping hazardous substances

Straps as an accessory

• Sealing of overflows – containment – prevention • Resistant against many chemicals, oils and water based liquids

1 + 2 Temporary barriers • Special plastic bonds perfectly to the surface, flexible and leakproof • Robust, reusable – simply clean with soapy water

1 Sealing mats Quick sealing to stop overflows, gutters etc. The mat should overlap with the opening by approx. 80 mm on all sides. Height 8 mm.

3 Practical straps as an accessory

Square mm

400 x 400 123 294-1E 725.00

600 x 600 713 360-1E 1350.00

800 x 800 713 361-1E 2100.00

23079

1000 x 1000 713 362-1E 2700.00

Ø 450 123 296-1E 875.00

Ø 850 123 295-1E 1500.00

2 Barrier rolls Quickly contain or divert escaped liquids. Individual elements can be connected to each other (also to form a ring). 3 metre barrier with handles. Length x width x height

434 www.kaiserkraft.ro

Round

Ref. RON

Lasting protection against leakages – indoors and outdoors • Very robust, can be driven over with typical workshop vehicles • Made of flexible, highly resistant polyurethane Easily attached with anchor bolts or adhered with silicone (not included). Optimal safeguarding against areas at particular risk of leakages. Height 60 mm.

Type

2000 x 50 x 45

3000 x 100 x 70

713 358-1E 1450.00

123 292-1E 2650.00

Length Width Ref. RON

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

mm mm

straight

corner

connection

1500 100 123 297-1E 995.00

370 / 370 100 123 298-1E 545.00

100 120 123 299-1E 150.00

BLUE = Short delivery period

23079

Type Length x width Ref. RON

3 Permanent barrier rolls

Ref. 713 363-1E RON / pair 120.00

Small container pumps

For acids, alkalis, cleaning agents

Model PP hand pump PP foot pump PVDF hand pump (not shown) Stainless steel hand pump (not shown)

1 2 3 4

Manual piston pumps

Hand pump ideal for containers up to 60 litres. Foot pump ideal for containers up to 120 litres. Polypropylene (PP) for weak acids, alkalis and cleaning agents. PVDF for acids, alkalis and corrosive media. Stainless steel for slightly flammable liquids in hazard class AIII (VbF). Immersion depth 700 mm 900 mm 700 mm 900 mm

Pump rate

Tube diameter

26 l/min 30 l/min 20 l/min 26 l/min

18 mm 22 mm 16 mm 18 mm

Ref.

RON

913 500-1E 913 498-1E 913 501-1E 913 503-1E

545.00 695.00 895.00 895.00

Hand pumps

Applicable for all pumps!

With hose (accessory)

For oil and diesel fuel

For corrosive liquids

For corrosive media or unspecified media, please enquire about compatibility beforehand.

• Pump made of non-rusting cast iron • Plastic piston and valves

• Parts in contact with media are made of stainless steel, PPS and FPM • Telescopic siphon pipe – suitable for 50 to 200 litre drums • With drainage elbow

Pump with immersion tube, drum screw connection and fitting for padlock. Fits all standard drums. With R 2" thread.

Pump rate Immersion tube length Max. viscosity at +20 °C

l/stroke

0.25

mm mPas

840 200

Nominal hose diameter Pump without hose Accessories Hose, length 1.5 m, electrically conductive

Suitable for acids and alkaline solutions, alcohol solutions, diesel fuel, kerosene, lubricants, lightweight oils, paraffin, waterbased chemicals and anti-freeze. Not suitable for solvents. R 2" drum thread.

Oil can set For mineral oils. Zinc plated sheet steel, plastic spout, measuring scale, can be calibrated. Set includes one 1-litre can and one 2-litre can.

DN 16 Ref. RON

598 895-1E 475.00

Ref. RON

598 909-1E 175.00

Ref. 709 658-1E RON 265.00

Rotary piston pumps

• With drainage elbow • For draining drums completely

2 For quick pumping of heating

With hand crank. R 2" drum thread for 200 litre drums. Hose for connection to the drainage elbow available as an accessory.

Aluminium housing. Parts coming in contact with media made of aluminium, steel, NBR, PE. Forward and reverse feed possible. 1 + 2 For diesel, heating oil, kerosene, hydraulic oil and engine oil. Not suitable for corrosive, degreasing or water-based media, organic solvents, acids or alkaline solutions.

based liquids

Aluminium housing. Parts coming in contact with media made of aluminium, NBR.

l/stroke

0.30

Immersion tube length

400 – 900

Max. viscosity at +20 °C

mPas

200

Ref. RON

119 948-1E 1130.00

1 With hose kit (accessory)

oil and diesel

1 For self-lubricating, mineral oil

Pump rate

ENVIRONMENT

Safe, continuous flow, no pulsation. For all commercially available containers with an opening Ø of 35 – 70 mm. The immersion tube automatically adapts to the drum height.

3 For weak chemicals, acids, alkaline solutions

Stainless steel housing. Parts coming in contact with media made of stainless steel, PTFE. For soluble, volatile chemicals such as ester, ketone, alcohol, alkalis, weak acids, alkaline solutions, chlorofluorocarbons, water-based fluids.

Model

23093

Pump rate Max. viscosity at +20 °C Immersion tube length Nominal hose diameter Pump with drainage elbow Accessories Hose set, length 2.2 m

l/stroke mPas mm inch Ref. RON

0.28 410 1150 1 454 235-1E 995.00

1 95 1030 1 1/4 454 236-1E 1500.00

0.28 410 1080 1 454 237-1E 3000.00

Ref. RON

454 238-1E 250.00

454 239-1E 300.00

454 238-1E 250.00

YELLOW = Ex stock

Telefon 0250 702 110 service@kaiserkraft.ro

from RON

995.00

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

435

Electric drum pumps

Pump 12 V with piston valve

For diesel and heating oil Robust, lightweight plastic housing. Screw for drums M 64 x 4 and G 2“ tanks. Suction hose with filter. Integrated hand pump for suction (not self-priming). For a 230 volt mains connection or for 12 volts with battery terminals (HGVs, passenger cars).

Digital volumetric flow meter for diesel and heating oil

Matching flow meter, please order separately.

Voltage Pump rate Max. pumping height at 1.6 m immersion depth Power Suction hose / discharge hose length to cut to size

Pump 230 V with automatic piston valve

Nominal hose diameter with piston valve, suction and pressure hose with automatically closing piston valve, suction and pressure hose

230

l/min m watt m

35 5 224 6

30 5 110 6

Ref. RON Ref. RON

DN 19 118 446-1E 1230.00 118 445-1E 1600.00

DN 19 118 448-1E 1330.00 118 447-1E 1650.00

Liquid volume measurement for non-calibrated needs. Single/total volume meter 5 or 6 digits. Calibrated. With adapter IG 1“. Powered by battery.

Measuring range Max. operating pressure Accuracy External connection Ref. RON

l/min

10 – 120

bar % inch

10 ±1 G1 118 444-1E 1130.00

Compressed air double membrane pumps For corrosive, flammable and contaminated liquids

Information for all items on this page. For corrosive media or unspecified media compatibility, please enquire about the suitability of pumps beforehand.

Oil free, compressed air driven double membrane pump, ideal for pumping viscous, corrosive, abrasive and flammable liquids.

½" model

Connection type

inch

1/4

1/2

Pump rate For pumping solid particles with max. Ø Dry suction height Operating pressure min./max. Pumping temperature Inlet side, outlet side water based liquids, lubricants, PP housing / membrane, balls and collars made of TPV (NBR-PP) mineral oils

l/min mm m bar °C Ref.

16 1.6 6 1.4 / 6.8 66 1/4" BSP IG 730 950-1E

65 3.2 4.5 1.4 / 8.0 66 1/2" BSP IG 730 957-1E

RON Ref.

2300.00 730 952-1E

3700.00 730 959-1E

RON Ref.

3150.00 730 954-1E

4500.00 730 961-1E

RON

3100.00

5980.00

corrosive liquids, inorganic acids and alkalis, electroplating solutions

PP housing / membrane, balls and collars made of PTFE

solvents, paints, petrol

PA housing / membrane, balls and collars made of PTFE

¼" model

Container pump sets For safe pumping of a wide range of chemicals, acids, alkalines etc. • Ergonomic, user friendly design • Speed regulator for task specific pumping rate – infinitely adjustable volume regulation from pump pistol • Various submersion depths for common container sizes Supplied as set, consisting of pump, 1.5 m PVC hose, filling pistol, hose clamps and hanging bracket. Connection voltage 230 V, cable length 3 m.

Volumetric flow meter (PP) Measuring range 5 – 90 l/min. Connection G 1". Description and technical details on the opposite page.

Immersion depth

23081

Pump unit / drive shaft

436 www.kaiserkraft.ro

Immersion tube Ø Pumping height Pump rate Power Ref. RON

mm m wc l/min watt

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

500

700

1000

PP / HC-4

stainless steel / stainless steel

32 6.5 65 200 505 369-1E 3600.00

32 6.5 65 200 505 370-1E 3700.00

32 6.5 65 200 505 371-1E 3950.00

28 6.5 65 200 505 372-1E 5730.00

BLUE = Short delivery period

23081

Ref. 516 987-1E RON 3100.00

Electric drum and container pumps Safe pumping of water hazardous, corrosive and flammable liquids • Pump sets are pre-assembled and quickly ready for operation • Ergonomically designed motor housing with an on/off switch that is easy to operate • Suitable pumps for all types of liquids • Two motor designs – explosion-proof option on request • Pump unit constructed without seals for operation even if the pump runs dry temporarily

1 For alkaline solutions For low viscosity alkalis, sodium hydroxide, potassium hydroxide, ammonia, formic acid, acetic acid etc. Description of pump set PP pump, with a 2.0 m PVC reinforced hose DN 19, PP pump pistol, PP drum adapter.

4 For mineral oils For low viscosity mineral oil products, such as diesel, heating fuel, hydraulic, machine and motor oil etc. Description of pump set Aluminium pump, with a 2.0 m PVC reinforced hose DN 25, aluminium pump pistol, PP drum adapter.

5 For solvents (explosion protected) For flammable hydrocarbons such as ethanol, petrol, butanol, isopropanol, kerosene, methanol, petroleum etc. Description of pump set Stainless steel pump, with a 2.0 m solvent hose DN 19, conductive hose connections, potential equalisation cable, brass pump pistol, PP drum adapter.

6 For solvents (explosion protected)

2 For acids For hydrochloric acid, phosphoric acid up to 50 %, chromic acid, battery acid up to 40 %, citric acid etc. Description of pump set PP pump, with a 2.0 m PVC reinforced hose DN 19, PP pump pistol, PP drum adapter.

used to remove residue from drums/containers

Same as solvent pump (ex), with additional complete emptying of drums – reduces disposal costs and avoids contaminating landfills with residue.

3 For concentrated acids and alkalis

ENVIRONMENT

For sodium hypochlorite, phosphoric acid, highly concentrated saltpetre and sulphuric acids etc. Description of pump set PVDF pump, with a special chemical r esistant 2.0 m hose DN 19, PVDF pump pistol, PP drum adapter.

1+2 Information for all items on this page. Please enquire about suitability if media other than those specified in the examples will be pumped, or if there is any doubt about c ompatibility.

Other immersion depths and spare parts on request.

3 Volumetric flow meters (PP) For non-flammable, low viscosity alkalis and acids. Four adjustable partial quantity ranges, total quantity meter. Can be calibrated, simple operation. Measuring accuracy ±1%. Please verify compatibility of media to be pumped with us before placing your order. Max. operating pressure 2 bar Measuring range 5 – 90 l/min Measuring accuracy ±1% Connection G 1 ¼”

Model Pump unit / drive shaft

PP / stainless steel

PP / HC-4

PVDF / HC-4

4 aluminium / stainless steel

stainless steel / stainless steel

Pumping height

m wc

Pump rate Power Immersion depth

l/min watt mm

85 500 1000

85 500 1200

85 500 1000

85 500 1200

80 580 1000

80 580 1200

85 500 1000

95 430 1000

77 430 1000

Ref. RON Ref. RON

754 809-1E 4950.00 754 817-1E 6480.00

754 810-1E 5130.00 754 818-1E 6480.00

754 812-1E 5630.00 754 819-1E 6730.00

754 813-1E 5880.00 754 821-1E 6980.00

983 737-1E 8880.00 983 738-1E 13250.00

983 739-1E 9380.00 983 740-1E 13450.00

754 814-1E 5230.00 754 822-1E 6380.00

754 815-1E 11450.00 754 823-1E 14750.00

754 816-1E 12950.00 754 824-1E 16250.00

Drum / tank container model

pump

23094

5+6

Ref. 516 986-1E RON 3100.00 YELLOW = Ex stock

pump set

Telefon 0250 702 110 service@kaiserkraft.ro

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

437

Safety dispensing and transport containers 4

• For flammable and corrosive liquids • Flame trap to protect against spread of fire and ignition

PTFE seal. Plastic protection ring, safety label. Leakproof screw cap, secured to container to prevent loss.

1 + 2 Storage and transport

3 – 5 Dispensing containers

containers

Made of zinc plated sheet steel, additionally powder coated in yellow or made of 1.4404 / SUS 316 L stainless steel.

5 2 1

Please verify compatibility of the containers before ordering.

Model Capacity Height x Ø sheet steel stainless steel

yellow

l mm Ref. RON Ref. RON

Same as storage / transport container, but with easy to operate fine dosage tap made of 1.4301 stainless steel (SUS 304).

2 226 x 158 714 349-1E 350.00 714 561-1E 895.00

5 336 x 178 714 386-1E 440.00 714 563-1E 1050.00

1 215 x 132 714 392-1E 545.00 714 565-1E 995.00

2 260 x 158 714 398-1E 595.00 714 580-1E 1050.00

5 370 x 178 714 401-1E 625.00 714 581-1E 1150.00

6 – 8 Stainless steel containers Container, screw-on lid, fine dosage tap and flame trap made of 1.4401 stainless steel. PTFE seals, pressure relief valve in fine dosage tap and screw-on lid prevents container from exploding due to heat. Plastic protection ring, safety label. Fine dosage tap Rotates 360°, with pressure release valve.

Screw-on lid With transport approval UN 1A1/X1.3/250... for internal and external transport via land, water or air. Secured to container to prevent loss.

Fine dosage tap In addition to, or in place of screw-on lid. Ref. 984 735-1E

Model

All containers on this page

Capacity with screw-on lid

Height x Ø

with fine dosage tap

Height x Ø

l mm Ref. RON mm Ref. RON

1 160 x 115 984 718-1E 1100.00 210 x 115 984 717-1E 1300.00

2.5 230 x 145 984 720-1E 1180.00 280 x 145 984 719-1E 1600.00

5 400 x 145 984 722-1E 1480.00 445 x 145 984 721-1E 1750.00

Safety containers

1–4

For regulation compliant storage and distribution of flammable and corrosive liquids • With handle and self-closing lid 1 – 4 Made of sheet steel

• Stainless steel flame trap in the spout • For flammable liquids in GHS categories 1 – 3 • Label with space for individual inscription

5 1

Model Capacity Height x width x depth Ref. RON

1 1

RON 795.00

l mm

Zinc plated and painted red.

5 Made of polyethylene (PE), red For corrosive solvents, acids and alkaline solutions. Controls made of stainless steel.

1 210 x Ø 122 752 451-1E 545.00

4 279 x Ø 241 752 454-1E 475.00

7.5 349 x Ø 241 752 455-1E 490.00

19 429 x Ø 298 754 768-1E 545.00

4 324 x 117 x 194 752 458-1E 675.00

Safety waste collectors With self-closing ¾” brass tap • For flammable and corrosive liquids • Safe, easy pouring • Flame protection sieve, self-closing lid

1 Made of sheet steel

Zinc plated and painted red.

2 Made of polyethylene, red For aggressive, corrosive liquids. Stainless steel flame trap. Control elements made of stainless steel.

438 www.kaiserkraft.ro

Capacity Height x Ø Ref. RON

1 l mm

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

9.5 292 x 298 917 550-1E 945.00

2 19 429 x 298 917 551-1E 945.00

BLUE = Short delivery period

19 432 x 292 917 552-1E 1330.00

23095

Model

Video

All containers on this page

ONLINE!

Please verify compatibility of the containers before ordering. A compatibility list can be found in our online shop.

Plunger cans Made of sheet steel or stainless steel • For moistening rags and cleaning cloths with flammable, corrosive liquids • Unused liquid drains back into container • With flame trap

Capacity sheet steel, galvanised and powder coated

Pump with spring loaded impregnation plate, Ø 128 mm. Container made of zinc plated sheet steel, additionally powder coated in yellow or made of 1.4404 / SUS 316 L stainless steel. Plastic protection ring.

l mm Ref. RON mm Ref. RON

Height x Ø

yellow

Height x Ø

stainless steel

1 208 x 178 714 584-1E 350.00 258 x 132 714 602-1E 995.00

2 290 x 178 714 586-1E 425.00 330 x 158 714 654-1E 1130.00

Plunger cans Made of sheet steel or polyethylene (PE)

Capacity sheet steel, galvanised and painted

red

Height x Ø

polyethylene

red

Height x Ø

• The brass and PPS pump transports the liquid to the impregnation plate, Ø 128 mm • With integrated flame trap

l mm Ref. RON mm Ref. RON

1 143 x 185 752 475-1E 545.00 210 x 140 752 478-1E 645.00

2 200 x 185 752 476-1E 625.00

4 267 x 185 752 477-1E 695.00

ENVIRONMENT

• To safely and economically moisten cloths and cleaning paper with s olvents

Impregnation cans Made of sheet steel, zinc plated and painted red • For dosed moistening of cloths and for parts cleaning. • Flame trap reduces liquid evaporation. • Cloths are impregnated by pressing down on the flame trap.

Capacity Height x Ø Ref. RON Accessories Parts basket, height x Ø 22 x 164 mm

Parts basket with perforated base available as an accessory. Small parts can be immersed and cleaned directly or in parts basket.

l mm

2 83 x 238 752 496-1E 545.00

4 114 x 238 752 497-1E 595.00

8 149 x 292 917 545-1E 845.00

Ref. RON

715 031-1E 120.00

Cleaning and immersion tanks Made of sheet steel, zinc plated and painted red

23096

• For safely cleaning small parts with solvents • Integrated safety lead melts in the event of fire and automatically c loses the cover

Capacity Height x Ø Ref. RON Accessories Parts basket

l mm

Ref. RON

YELLOW = Ex stock

Parts basket with perforated base available as an accessory. Small work pieces can be immersed and cleaned directly or in parts basket.

4 140 x 238 752 484-1E 795.00

8 254 x 238 752 485-1E 875.00

30 362 x 397 752 486-1E 1250.00

752 489-1E 475.00

752 490-1E 625.00

Telefon 0250 702 110 service@kaiserkraft.ro

Parts basket available as an accessory

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

439

Safety disposal cans Made of sheet steel • For cleaning materials soaked with flammable and water hazardous liquids (solvents, thinners, oils, adhesives) • Self-closing lid • Ventilated base protects against overheating and spontaneous combustion • Large handle for easy transport of the container Zinc plated sheet steel, additionally painted. Round, sturdy and stable.

Standard Two versions: Lid opened by hand or with practical pedal. Painted red.

Standard with pedal opener

SoundGard™ Lid closes quietly due to special sound absorbing mat in the lid. Container and pedal painted silver.

3 with pedal

from RON

545.00

Model

Capacity Height x Ø Type Standard

SoundGard™

l mm Ref. RON Ref. RON

SoundGard™

20 403 x 302 with pedal 761 236-1E 545.00 523 515-1E 775.00

2 34 464 x 354 with pedal 761 237-1E 895.00 523 516-1E 895.00

3 manual 761 241-1E 945.00

52 514 x 408 with pedal 761 238-1E 1100.00 523 517-1E 1100.00

4 80 595 x 467 with pedal 761 239-1E 1850.00 523 519-1E 1850.00

manual 761 243-1E 1800.00

Safety disposal cans Made of zinc plated sheet steel • For waste soaked with flammable and water hazardous liquids • Tested by TÜV in accordance with FM criteria • Self-closing lid • Ventilated base protects against overheating and spontaneous combustion • Attractive design • Stable and robust

Large handle for easy emptying. Wide pedal. Includes safety sticker.

Made of sheet steel Zinc plated and additionally powder coated red.

Other products

Capacity Height x width x depth sheet steel

440 www.kaiserkraft.ro

mm Ref. RON

430 x 375 x 385 714 320-1E 725.00

490 x 440 x 425 941 141-1E 825.00

535 x 495 x 460 941 143-1E 995.00

580 x 535 x 490 941 145-1E 1130.00

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

BLUE = Short delivery period

26509

ONLINE!

Drum accessories 1 – 5 Safety taps • Self-closing to prevent uncontrolled leakage • Flame traps protects against spread of fire and ignition of contents

1 For flammable media, lockable 2 For aggressive media, lockable 3 For flammable media and solvents Electrically conductive, detachable reducer spout. 4 For aggressive, corrosive media 5 For viscous media

6 Drum key For opening all standard drum threads (2”, ¾”), ¼” key for drum taps. Made of bronze – no spark generation. Length 310 mm, weight 800 g. Ref. 170 653-1E

Model Material Thread Feature

RON 375.00

inch

Ref. 170 652-1E

Seal material Pack of Ref. RON / pack

RON 415.00

brass 3/4 self-closing

stainless steel 3/4 self-closing / adjustable dispensing position

nylon 3/4 adjustable dispensing position

PTFE 1 170 648-1E 350.00

PTFE 1 170 649-1E 975.00

PTFE 2 523 557-1E 415.00

7 Drum safety valve Pressure compensation during filling – valve opens automatically at 0.35 bar. Brass. 2” connection. For horizontal and vertical drums.

polyethylene 3/4

3 915 719-1E 415.00

3 915 720-1E 895.00

brass 2 self-closing

PTFE 1 170 650-1E 1180.00

ENVIRONMENT

8 Fill level indicator Drum fill level can be read exactly, visual media check. Chrome plated steel, glass tubes. For all ¾” drum taps. Filling possible when mounted. For steel and plastic drums. No tap. Ref. 170 651-1E

RON 675.00

9 Safety drum funnel For the safe filling of flammable liquids such as solvents, thinners and oils in drums Closes automatically in the event of fire, with flame trap. Lockable lid with hinge. Made of sheet steel, zinc plated and powder coated red. Height x Ø 254 x 273 mm. Ref. 983 625-1E

RON 1480.00

a – d Polyethylene drum funnels

• Profiled base ensures splash free filling • Safe filling of 200 litre drums • Can also be used as a storage space for filters and cans

a With sieve to protect against contamination Optionally without or with lockable lid. b For corrosive, non-flammable liquids c Lid for 9 litre PE drum funnel d For flammable liquids, with flame trap

e Sheet steel drum funnel

Robust, large funnel to fill via the 2” bunghole. Powder coated in blue RAL 5010. Model

23083

Capacity Height x Ø Type Ref. RON

l mm

22 190 x 690 with sieve 913 345-1E 795.00

YELLOW = Ex stock

190 x 690 with sieve and lid

9 83 x 533 without flame trap

32 x 482 Lid

9 83 x 533 with flame trap

30 135 x 650 without sieve

913 346-1E 1130.00

709 656-1E 415.00

709 653-1E 390.00

709 655-1E 1100.00

913 347-1E 595.00

Telefon 0250 702 110 service@kaiserkraft.ro

c e

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

441

Video

Cleaning and waste management Parts cleaning Page 442

Sweeping machines Pages

443, 454

5380.00

ONLINE!

from RON complete set

Small parts cleaners For professional cleaning and grease removal • Sturdy sheet steel design • High load capacity and resistant to mechanical stress • Maintenance free, self-priming circulation pump

1 Mobile parts cleaner Moves like a sack truck. Ideal for changing work sites, space saving and versatile.

Pages

444 - 447

Vacuum cleaners Pages

448 - 453

High pressure cleaners Page 454

Complete set Ready for immediate use. Set consists of parts cleaner and 50 litres of special cleaning solution.

2 Professional parts cleaner

Device at workbench height. Extra large w orking surface also suitable for large parts. Model

Waste collectors – outdoor Pages

455 - 459, 461

Ashtrays Pages

Complete set Ready for immediate use. Set consists of parts cleaner, steel sump tray, 200 litre capacity in accordance with the German water management act and 200 litres of special cleaning solution.

460 - 465

For drum size Working height Worktop W x D Max. load device only

l mm mm kg Ref. RON Ref. RON Ref. RON

device, cleaning solution device, cleaning solution, sump tray

Waste collectors – indoor Pages

466 - 475

ecyclable R waste collectors Pages

476 - 483, 496 - 501

Waste sack stands Pages

484 - 491

Special cleaning solution • Shelf life of up to 1 year • Does not require heating • Removes oil and grease Provides temporary protection against corrosion. Not classified under work safety regulations, does not irritate skin and has a mild odour.

Waste bins Pages

Pages

With parts basket (accessory)

Accessories and other cleaning products on request.

442 www.kaiserkraft.ro

502 - 503

50 920 790 x 490 100 505 469-1E 5380.00 505 467-1E 5380.00

200 870 1135 x 660 250 505 468-1E 6130.00

505 466-1E 10450.00 505 470-1E 2950.00

Ref. RON

Special cleaning solution Contents

l Ref. RON

50 505 473-1E 1100.00

200 505 472-1E 3600.00

Cleaning brushes

Type

fine bristles

coarse bristles

With hose connection. Pack of 5.

Ref. RON / pack

505 490-1E 400.00

505 491-1E 400.00

Immersion cleaning tanks

492 - 495

Waste sacks

Accessories Sump tray

For professional, reliable parts cleaning • Safe and easy cleaning, and complete immersion of larger parts at a comfortable working height • Slow, automatic lid closure • Lid, tank and base sump tray made of stainless steel to ensure high durability

For depositing small open items in the tank. Lid is held open with a pedal. Brass drainage tap in tank bottom simplifies emptying of the tank. Liquid spilled during emptying drains into the base sump tray. Perforated base permits coarse dirt to settle. The parts basket makes it easy to immerse smaller objects.

Height x width x depth

850 x 700 x 600

Basin height x width x depth Weight Ref. RON Accessories Perforated base

mm kg

220 x 610 x 330 26 194 034-1E 4800.00

Ref. RON Ref. RON

194 042-1E 575.00 195 006-1E 595.00

Parts basket

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

BLUE = Short delivery period

26246

Manual cleaning

Floor sweeping machines Video

ONLINE!

1 2

Single roller system

Tandem roller system

Sweeping machines

6+7

2 Practical sweeping machine

4 + 5 Sweeping machine

with a side brush

The right machine for every application • Innovative, versatile and ergonomic • For indoor and outdoor use • Light, easy to turn and quiet Ideal for sweeping edges. Particularly suitable for fine, coarse and dry dirt such as paper, leaves, metal shavings.

with single roller dustpan and two side brushes

Side brushes made of hardwearing nylon. Extremely manoeuvrable with an adjustable swivel castor in the front, easy to handle, for year-round use in indoor and outdoor areas. Cleans thoroughly even on uneven ground. Quick battery changeover possible. Supplied complete with 2 x 12 Ah batteries and one charging device.

Height adjustable side brushes made of hardwearing nylon. Very sturdy and manoeuvrable. For various demanding applications.

6 + 7 Sweeping machine

with tandem roller system and two side brushes

3 Manual sweeping machine with two side brushes

1 Manual sweeping machine with one side brush

Side brushes made of hardwearing nylon. Small, handy, manual sweeping machine with single roller s ystem.

ENVIRONMENT

4+5

With two height adjustable side brushes made of hardwearing nylon and two counter-rotating roller brushes. Extremely easy to push and manoeuvre. Stairs are no problem due to large wheels at the rear. Supplied with spare drive belt for replacement in the event of corresponding wear and tear.

Height adjustable side brushes made of hardwearing nylon. Especially thorough sweeping of rubbish – from dust particles to drinks cans. Two counter-rotating roller brushes sweep the rubbish into the large waste container in one step.

5 + 7 Supplied with 25 Ah battery and a 5 A charger (on board).

Powered sit-on models are available on request

More information on the machines can be found in the webshop. Model

26245

Technical description

Brush roller drive Dust vacuuming Sweeping width Max. sweeping capacity Container capacity Filter cleaning Net cleaning surface max. Battery Length x width x height Ref. RON

mm m²/h l m² mm

YELLOW = Ex stock

completely manual

battery, brush drive

completely manual

manual – 650 2270 20 – 500 – 450 x 600 x 200 600 264-1E 795.00

motorised – 650 2275 50 – 1500 2 x 12 V / 12 Ah 700 x 600 x 480 115 674-1E 6630.00

manual – 800 2800 40 – 1000 – 800 x 660 x 330 727 757-1E 1850.00

completely manual battery, dust vacuuming, brush drive manual – 900 3150 50 – 2000 – 1091 x 760 x 416 920 287-1E 3400.00

Telefon 0250 702 110 service@kaiserkraft.ro

motorised electric 900 3150 50 mechanical 2000 12 V / 25 Ah 1091 x 760 x 416 920 291-1E 8880.00

completely manual battery, dust vacuuming, brush drive manual – 900 3150 50 – 2000 – 1091 x 760 x 416 920 283-1E 3950.00

motorised electric 900 3150 50 mechanical 2000 12 V / 25 Ah 1091 x 760 x 416 920 286-1E 9380.00

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

443

Manual cleaning Wet mop trolleys

For professional floor cleaning

1 With 1 x 24 l mobile bucket with mop

NEW

from RON

545.00 Model

Length x width x height

mm Ref. RON

420 mm, chrome plated frame with waste sack holder for 120 l waste sacks, with push handle 5 With 2 x 27 l mobile buckets, height 420 mm, chrome plated frame with push handle

1 x 24 l plastic

1 x 27 l metal, chrome plated

2 x 17 l plastic

2 x 17 l metal, chrome plated

2 x 27 l metal, chrome plated

380 x 470 x 320 483 863-1E 545.00

420 x 520 x 420 483 864-1E 645.00

420 x 650 x 420 483 865-1E 695.00

420 x 870 x 390 483 867-1E 845.00

430 x 730 x 540 483 866-1E 745.00

Number of buckets Frame material

4 With 2 x 17 l mobile buckets, height

wringer, height 320 mm, plastic 2 With 1 x 27 l mobile bucket with mop wringer, height 420 mm, chrome plated frame, with push handle 3 With 2 x 17 l mobile buckets, height 420 mm, plastic frame, with push handle

Wet mop trolleys

For professional floor cleaning

• Extremely robust tubular steel frame, multiple layer surface treatment and chrome plated • Smooth running swivel castors, bumper discs • Hook-in, durable, professional mop wringer made of plastic • Plastic bucket with handle

RON / set

1430.00

Nr. 483 940-1E

1 Single mobile bucket, 1 x 30 litres, mop wringer. 2 Single mobile bucket, 1 x 25 litres, mop wringer. 3 Double mobile bucket, 2 x 25 litres, with folding push handle and mop wringer.

4 Double mobile bucket, 2 x 15 litres,

with folding push handle and mop wringer. 5 Double mobile bucket, 2 x 25 litres, with folding push handle and 360° swivelling mop wringer.

Also available in a set.

Floor mop set Wet mop unit, chrome plated handle with floor mop holder, 10 floor mops (400 g). Wide wipe mop set Wet mop unit, chrome plated handle with wide mop holder, 10 wide wipe mops with pockets (width 500 mm).

Model Number of buckets Length x width x height wet mop units

mm Ref. RON Ref. RON Ref. RON

wide wipe mop set floor mop set

1 x 30 l 470 x 400 x 930 483 919-1E 795.00 483 940-1E 1430.00 483 949-1E 1150.00

1 x 25 l 510 x 400 x 870 483 921-1E 895.00 483 941-1E 1480.00 483 950-1E 1280.00

2 x 25 l 730 x 400 x 930 483 922-1E 1280.00 483 943-1E 1850.00 483 952-1E 1600.00

2 x 15 l 670 x 390 x 880 483 923-1E 1230.00 483 942-1E 1750.00 483 951-1E 1550.00

2 x 25 l 730 x 400 x 930 483 924-1E 1330.00 483 944-1E 1900.00 483 953-1E 1700.00

2 Wide wipe mop holder

For holding mops with pockets. Incl. 2-piece handle, length 1400 mm.

3 Wide wipe mop holder

1 2

1 Plastic floor mop holder For wet cleaning of large areas

Ref. 483 900-1E

Width

400

500

for wide wipe mop with pockets

Ref. RON Ref. RON

483 893-1E 240.00 483 895-1E 315.00

483 892-1E 265.00 483 894-1E 325.00

400

500

483 897-1E 475.00

483 896-1E 475.00

for wide wipe mop with flaps

Accessories

RON 110.00

Universal wide wipe mops Pack of 10

Accessories Floor mops Pack of 10 Ref. 483 901-1E

Other cleaning accessories

RON / pack 375.00

444 www.kaiserkraft.ro

ONLINE!

Width Ref. RON / pack

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

BLUE = Short delivery period

26247

For mops with flaps. Incl. 2-piece handle, length 1400 mm.

Manual cleaning

ENVIRONMENT

Cleaning and service trolleys Sturdy and durable frames made of precision tubular steel • Swivel castors, bumper discs

3 Cleaning trolley with holding frame for

1 Service trolley with holding frame and base

tray for 120 litre waste sack, 1 large wire mesh baskets, 1 plastic tray, clip flip handle holder. 6 litre buckets are available in the web shop as accessories.

2 Service trolley with holding frame and base tray for 120 litre waste sack, 2 large wire mesh baskets, 1 plastic tray with 2 x 6 litre buckets, clip flip handle holder.

Model Length x width x height cleaning trolley

23100

wide wipe mop set floor mop set

mm Ref. RON Ref. RON Ref. RON

YELLOW = Ex stock

120 litre waste sack, 3 large p lastic trays, 2 x 15 litre buckets with mop wringer and clip flip h andle holder. 4 Cleaning trolley with holding frame for 120 litre waste sack, 2 wire mesh baskets, 2 x 15 litre buckets with mop wringer with a base tray underneath, 2 x 12 litre buckets and clip flip handle holder.

5 Stair compatible cleaning trolley with

holding frame for 120 litre waste sack, small plastic tray, 2 x 6 l buckets, 15 l bucket with mop wringer and clip flip handle holder.

6 Cleaning trolley with holding frame for

120 litre waste sack, wire basket with 2 x 6 litre buckets and 2 x 15 litre buckets with mop wringer, clip flip handle holder. Suitable cupboards for your cleaning equipment can be found on page 677.

850 x 530 x 1050 483 930-1E 1280.00

850 x 530 x 1050 483 929-1E 1700.00

1050 x 580 x 1100 483 925-1E 2600.00 483 945-1E 3000.00 483 954-1E 2850.00

1130 x 670 x 1100 483 926-1E 2400.00 483 946-1E 2850.00 483 955-1E 2600.00

750 x 460 x 1220 483 927-1E 1800.00 483 947-1E 2450.00 483 956-1E 2250.00

750 x 650 x 1220 483 928-1E 2150.00 483 948-1E 2750.00 483 957-1E 2650.00

Telefon 0250 702 110 service@kaiserkraft.ro

Accessories Reusable waste sack for cleaning trolleys Reusable PVC waste sack as an accessory. Capacity 120 litres. Ref. 483 932-1E

RON / each 325.00

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

445

Manual cleaning Stainless steel cleaning trolleys Effective cleaning of floors and surfaces • • • •

For professional, systematic cleaning of various floors and surfaces Robust, non-rusting stainless steel frame (AISI 304) High quality swivel castors with corner protectors to protect furniture Hygienic model – suitable for HACCP

1 Single mobile bucket, 25 l

Stainless steel wheeled base with 25 l bucket (red) with plastic mop wringer with metal castors.

2 Double mobile buckets 2 x 25 l

Stainless steel wheeled base with 2 x 25 l buckets (red and blue) with plastic mop wringer with metal castors.

3 Modular cleaning trolley with mop wringer

Stainless steel wheeled base with holding frame for a waste sack, three large plastic trays, 2 x 10 l bucket (red and blue), 2 x 15 l bucket with mop wringer, high quality plastic castors.

4 Cleaning trolley

Stainless steel wheeled base with holding frame for a waste sack, three large plastic trays, 2 x 10 l bucket (red and blue), high quality plastic castors.

5 XL cleaning trolley

Stainless steel wheeled base with holding frame for a waste sack, four large plastic trays, 2 x 10 l bucket (red and blue), 1 x 6 l bucket (red), high quality plastic castors.

Cleaning set Consisting of cleaning trolley, wide mop holder with handle and pack of 10 microfibre mops, 400 mm wide.

Accessories

3 from RON

Reusable waste sack for cleaning trolleys Reusable PVC waste sack as an accessory. Capacity 120 litres.

1200.00

Ref. 483 932-1E RON / each 325.00

Model Length x width x height cleaning trolley cleaning set

446 www.kaiserkraft.ro

mm Ref. RON Ref. RON

4 1

470 x 410 x 900 480 728-1E 1200.00 480 734-1E 1950.00

410 x 770 x 900 480 729-1E 1600.00 480 735-1E 2300.00

690 x 1100 x 1100 480 732-1E 5230.00 480 736-1E 5980.00

560 x 770 x 1100 480 730-1E 3950.00

560 x 770 x 1520 480 731-1E 4650.00

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

Suitable cleaning accessories can be found on page 444 and in the webshop. 26248

BLUE = Short delivery period

Manual cleaning 1 Wide wipe mop holder For holding mops with pockets. Incl. 2-piece handle, length 1400 mm. Width

Professional cleaning sets

Ref. RON / pack

The basic professional cleaning set with a professional mop wringer

400

500

483 893-1E 240.00

483 892-1E 265.00

2 Multi-microfibre mops

Consisting of – 30 litre, plastic single mobile bucket – Durable mop wringer – Holder for wide wipe mops with pockets incl. handle for 400 mm wide mops – 5 multi-microfibre mops, 400 mm wide – 2 microfibre cloths – Window washer and wiper made of stainless steel, with covering, 350 mm wide

Micro fibres

Also ideal for floors which are sensitive to moisture. Innovative scrubber texture for effective removal of dirt. With pockets and flaps. Microfibre with slightly abrasive clusters of 80% polyester, 20% nylon with pockets and flaps (universal use with all folding holder systems). Pack of 10.

Width Ref. RON / pack

Ref. 480 733-1E

RON 1100.00

400

500

483 898-1E 595.00

483 899-1E 645.00

Suitable cleaning accessories can be found on page 444 and in the webshop.

ENVIRONMENT

Micro fibres

Microfibre mop pads Blue, with pockets and flaps. Mop pad can be loosely attached to the mop holder using the integrated flaps or tensioned for use as a wide mop. Width x length 435 x 140 mm.

Microfibre cloths Multi-lingual yellow warning sign. Double sided, folding. Height 600 mm.

Hygienic with consistently good cleaning characteristics. These cloths are both environmentally friendly and cost effective as they are very durable and require only a small amount of cleaning agent. Blue, 406 x 406 mm.

Pack of 2.

Pack of 12.

Warning signs

Ref. 944 691-1E RON / pack

200.00

Ref. 614 399-1E

Pack of 10. Ref. 614 379-1E

RON / pack 845.00

Anti-microbial microfibre cloth – good cleaning characteristics with less cleaning agent. Ideal for disinfection.

RON / pack 400.00

Multi-purpose mop holders Grey aluminium handle (1390 mm) and mop holder (width 400 mm). For use with mop pads with pockets and flaps. Mops are not included with delivery. Ref. 614 397-1E

RON 365.00

Window cleaning sets For easy and efficient cleaning of all glass surfaces

26510

The set consists of window washer and window wiper, width 350 mm, rectangular 13 litre bucket with hooks, high quality window leather, 3-part telescopic rod, safety scraper and 1 litre of glass cleaner.

Ref. 754 670-1E

RON 645.00 YELLOW = Ex stock

Telefon 0250 702 110 service@kaiserkraft.ro

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

447

Vacuum cleaners

from RON

995.00

1 • Optimum function, very economical • Wet and dry vacuum cleaning without reconfiguration • Very stable with a low centre of gravity, large wheels and swivel castors

1, 2

3, 4

Wet and dry vacuum cleaners Professional vacuum cleaners

1 Professional general purpose

3 Professional coarse dirt

4 Professional multi-purpose

Special plastic container, non-tipping and functional. Accessory depot with 6 holders. Perfect for use in offices and w orkshops. With cellulose filter cartridges 3600 cm².

With a 32 litre special plastic container and coarse dirt accessories. With cellulose filter cartridge 3600 cm². Standard equipment system Ø 49 mm 1 suction hose 1.75 m 2 x 500 mm plastic suction tubes 1 coarse dirt crevice nozzle 1 coarse dirt floor nozzle 1 coarse dirt nozzle 1 fibre filter bag

With a 30 litre container made of high gloss chrome plated steel and coarse dirt accessories. With cellulose filter cartridge 3600 cm². Standard equipment system Ø 49 mm 1 suction hose 1.75 m 2 x 500 mm plastic suction tubes 1 coarse dirt crevice nozzle 1 coarse dirt floor nozzle 1 coarse dirt nozzle 1 fibre filter bag

vacuum cleaner

2 – 7 Professional vacuum

cleaners and coarse dirt vacuum cleaners

Vacuum cleaner with blow function for blowing off coarse dirt. User friendly thanks to a large rocker switch for switching on and off. Up to eight accessory holders on the unit, and a storage tray for tools and small parts. With hose winder on carrying handle.

vacuum cleaner for coarse dirt

5 Professional vacuum cleaner With rubberised rollers and integrated multifunction element that functions as an emptying handle, hand brake for a secure footing and ride guard with ramp function. With a high quality polyester filter cartridge approx. 3600 cm². Standard equipment system Ø 35 mm 1 suction hose 3.2 m 1 stainless steel hand tube with auxiliary air slide 1 stainless steel telescopic pipe, infinitely adjustable 1 crevice nozzle 1 upholstery nozzle 1 professional universal nozzle 1 water nozzle 1 fibre filter bag

2 Professional vacuum cleaner 1 + 2 Standard equipment system Ø 35 mm 1 suction hose 1.75 m 1 hand tube with auxiliary air slide 2 x 500 mm plastic suction tubes 1 crevice nozzle 1 upholstery nozzle 1 universal nozzle 1 water nozzle 1 fibre filter bag

448 www.kaiserkraft.ro

Model Power consumption Voltage Vacuum pressure Air flow Container capacity Length x width x height Weight Ref. RON Accessories Filter bags Pack of 10 pcs. Concertina filter cartridges

watt V mbar l/s l mm kg

1200 230 210 70 20 395 x 390 x 473 6.2 119 755-1E 995.00

1400 230 259 69 20 395 x 390 x 550 9.34 119 151-1E 1150.00

1400 230 259 69 32 395 x 390 x 635 11.01 119 152-1E 1380.00

1400 230 259 69 30 460 x 430 x 700 11 119 756-1E 1700.00

1400 230 259 69 20 390 x 370 x 550 10.78 119 153-1E 1800.00

Ref. RON / pack Ref. RON

730 685-1E 230.00 483 810-1E 160.00

483 813-1E 475.00 483 810-1E 160.00

730 685-1E 230.00 483 812-1E 210.00

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

BLUE = Short delivery period

23600

With cellulose filter cartridge 3600 cm².

Vacuum cleaners Low noise

Automatic filter cleaning

Additional socket

6 7 8 Standard equipment

Safety industrial vacuum cleaners

9, a

6 Professional vacuum cleaner

9 + a Safety industrial vacuum cleaners

With a 35 litre stainless steel container, rubberised rollers and integrated multi-function element that functions as an emptying handle, hand brake for a secure footing and ride guard with ramp function. With a polyester filter cartridge 3600 cm².

With automatically supported filter cleaning during the vacuuming process, signal tone when the defined flow rate is not reached, anti-static hose. Storage tray for tools and small parts. Double walled, sturdy plastic container. Smooth inside walls enable quick and easy cleaning. Easily manoeuvrable due to large wheels and reinforced swivel castors. Power socket with automatic switch located on vacuum cleaner enables direct vacuuming of the power tool being used.

7 Professional vacuum cleaner With 45 litre plastic container, a practical handlebar and rubberised rollers and wheels. With cellulose filter cartridge 7200 cm².

8 Professional power vacuum

ENVIRONMENT

6, 7, 8

Dusts with max. workplace exposure limit (WEL) ≥ 0.1 mg/m³, wood dust

• Use helps to maintain regulatory exposure limits • Protects employees when working with hazardous dusts • Safety vacuum cleaners certified according to requirements for classes M and H • For the collection of harmful, non-explosive dust

Dusts with max. workplace exposure limit (WEL) ≥ 0.1 mg/m³, carcinogenic dusts, pathogenic dusts

9 Standard system equipment Ø 35 mm 1 suction hose 5 m antistatic 1 connecting sleeve (stepped) 3 special PE emptying bags

a Standard system equipment Ø 35 mm 1 suction hose 5 m 1 connecting sleeve (stepped) 3 special PE emptying bags

99.99% dust retention capacity. With 2 polyester filter cassettes.

99.995% dust retention capacity. With 2 HEPA filter cassettes.

cleaner with 2 or 3 motors

Special concertina filter cartridge with approx. 3200 cm² filter surface. Polyester filter sack with approx. 3100 cm² filter surface. Chrome plated 78 litre steel container with t ilting chassis. With paper filter bag.

7 + 8 Standard equipment system Ø 35 mm 1 suction hose 3.2 m 1 stainless steel hand tube with auxiliary air slide 2 x 500 mm stainless steel extension tubes 1 professional floor nozzle 45 (alum.) with rubber strip and brush strip 1 crevice nozzle 1 suction brush

Model Power consumption Voltage Vacuum pressure Air flow Container capacity Length x width x height Weight Ref. RON Accessories Filter bags Pack of 10 pcs. Concertina filter cartridges Special PE emptying bags

26249

Pack of 10 pcs. Concertina filter cartridges Pack of 2 pcs.

YELLOW = Ex stock

watt V mbar l/s l mm kg

1400 230 259 69 35 460 x 440 x 700 12.8 119 154-1E 2450.00

1400 230 259 69 45 470 x 480 x 790 15.66 119 155-1E 2200.00

2400 230 205 2 x 54 78 615 x 630 x 970 33 730 929-1E 3750.00

3600 230 205 3 x 54 78 615 x 630 x 970 35 730 930-1E 4800.00

1600 230 280 75 35 660 x 400 x 920 17.27 490 453-1E 5230.00

1600 230 280 75 35 660 x 400 x 920 18.66 490 454-1E 5730.00

Ref. RON / pack Ref. RON

483 813-1E 475.00 483 812-1E 210.00

730 686-1E 325.00 483 811-1E 240.00

759 779-1E 415.00 730 931-1E 220.00

Ref.

614 361-1E

RON / pack Ref. RON / pack

1480.00 614 362-1E 775.00

1480.00 614 359-1E 1330.00

Telefon 0250 702 110 service@kaiserkraft.ro

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

449

Vacuum cleaners

Low noise

Dry vacuum cleaners

Wet and dry vacuum cleaners

1 T 7/1 Classic

3 T 12/1

5 + 6 NT 27/1 Adv + NT 27/1 Me Adv

Very manoeuvrable due to two large double swivel castors. Convenient on/off foot switch. Carrying handle with cable holder. Can be operated with or without filter. Standard equipment 2 m suction hose with anti-static elbow and suction power regulation, 3 x 0.35 m plastic suction tubes, floor nozzle, fibre filter bag. 7.5 m electric cable.

Ergonomic. Very quiet at only 61 dB(A). Very manoeuvrable due to two large double swivel castors. Convenient on/off foot switch. Carrying handle with cable holder. Can be operated with or without filter. Standard equipment 2.5 m suction hose with elbow and suction power regulation, metal extension tubes 2 x 0.5 m, combination floor nozzle, fibre filter bag, cable length 12 m.

Compact and manoeuvrable. Extra large filter surface area. Mechanical float switch-off when maximum fill level is reached. Accessory holders and cable hooks on the unit. Standard equipment Ø 35 mm 2.5 m suction hose with elbow, 2 x 0.5 m extension tubes, wet and dry vacuum nozzle, universal brush, crevice nozzle, paper filter bag, cartridge filter.

2 T 10/1 Very manoeuvrable due to two large double swivel c astors. Convenient on/off foot switch. Cable with plug. Can be operated with or without filter. Standard equipment 2.5 m suction hose with elbow and suction power r egulation, metal extension tubes 2 x 0.5 m, combination floor nozzle, fibre filter bag. 10 m electric cable.

4 T 15/1 Very powerful professional vacuum cleaner with telescopic suction pipe, low noise level of only 59 dB(A), impact protection, 2 wheels and 2 swivel castors. Standard equipment 2.5 m suction hose with comfort elbow, telescopic suction pipe, floor/upholstery/crevice and radiator nozzles, fleece filter bag, cable holder and Highflex mains cable.

The energy labels to the vacuum cleaners can be found in our webshop.

23102

Model Power consumption Container material Vacuum pressure Air flow Container capacity Length x width x height Weight Ref. RON Accessories Fibre / paper filter bags Pack of 10 pcs.

450 www.kaiserkraft.ro

mbar l/s l mm kg

850 plastic 235 40 7.5 375 x 285 x 322 5.3 175 299-1E 945.00

800 plastic 240 53 10 355 x 310 x 385 6 111 185-1E 1330.00

800 plastic 240 53 12 340 x 315 x 410 6.6 111 186-1E 1750.00

800 plastic 240 53 15 435 x 315 x 400 8 111 187-1E 2650.00

1380 plastic 200 67 27 420 x 420 x 525 7.5 111 188-1E 1750.00

1380 stainless steel 200 67 27 420 x 420 x 540 8.2 979 844-1E 1800.00

Ref. RON / pack

982 413-1E 135.00

979 850-1E 215.00

614 348-1E 215.00

979 846-1E 340.00

watt

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

BLUE = Short delivery period

23102

Additional Kärcher products available on request.

Vacuum cleaners 7 Automatic filter cleaning

9 e Cuttings

Wet and dry vacuum cleaners

More Kärcher products

7 NT 30/1 Tact L

a NT 65/2 Ap

d NT 55/2 Tact² Me shavings

Automatic filter cleaning for constant, high vacuuming capacity. Flat concertina filter element – can be switched from wet to dry vacuuming without changing filters. Standard equipment Ø 35 mm 2.5 m suction hose with elbow, 2 x 0.55 m stainless steel tubes, wet and dry vacuum nozzle, fleece filter.

Semi-automatic filter cleaning for prolonged work periods and longer service life. Electronic fill level indicator for wet vacuuming. Oil-resistant drainage hose. Clip system to hold accessories in place. Large surface for tools etc. Standard equipment Ø 40 mm 4.0 m suction hose with elbow and power filter cleaning, 2 x 0.5 m extension tubes, wet and dry vacuum nozzle, crevice nozzle, flat concertina filter element, paper filter bag.

Two motor vacuum cleaner with filter cleaning. Automatic shut-down when container is full. Electronic sensor shut-off. Waste container with castors. Convenient detachable dolly. Standard equipment Ø 40 mm 4.0 m suction hose with elbow, 2 x 0.5 m extension tubes, 360 mm floor nozzle.

8 NT 40/1 Tact TE L, 1380 W Specially developed for use on construction sites. Equipped with a robust bumper. Automatic filter cleaning for a constant high suction power. Flat concertina filter – can be switched from wet to dry vacuuming without changing filters. Standard equipment Ø 35 mm 4.0 m suction hose with elbow, 2 x 0.5 m metal extension tubes, wet and dry vacuum nozzle, crevice nozzle, eco filter system, swivel castor with stop, connection sleeve for power tools.

9 NT 48/1 With drainage hose for draining liquids. Standard equipment Ø 35 mm 2.5 m suction hose with elbow, 2 x 0.5 m extension tubes, wet and dry vacuum nozzle, cartridge filter.

ENVIRONMENT

ONLINE!

Powerful vacuum cleaners for industrial use

e NT 75/2 Tact² Me

b + c NT 70/3 + NT 70/2 TC Motors can be switched-on separately. Float to interrupt vacuuming when container is full. Drainage hose. Easy to manoeuvre, with bumper on chassis. Accessory holders and integrated cable hook on the back of the vacuum cleaner. Standard equipment Ø 40 mm 4.0 m suction hose with elbow, 2 x 0.5 m extension tubes, floor nozzle, crevice nozzle, cartridge filter.

Fully automatic, double filter cleaning, anti-static system and bumper on the chassis. Storage compartments on the top of the unit provide for the storage of tools, small parts, etc. Incl. drainage hose. Accessories can be stored on the unit. Max. power 2 x 1380 W. Standard equipment Ø 40 mm 4.0 m suction hose with electrostatically earthed elbow, 2 x 0.5 m extension tubes, wet and dry vacuum nozzle, crevice nozzle, flat concertina filter element, paper filter bag.

c NT 70/2 TC With tilting chassis and swivel castor with stop.

Additional Kärcher products available on request.

23602

Model Power consumption Container material Vacuum pressure Air flow Container capacity Length x width x height Weight Ref. RON Accessories Fibre / paper filter bags Pack of 10 pcs.

mbar l/s l mm kg

1380 plastic 254 74 30 580 x 370 x 560 15.95 482 968-1E 3800.00

1380 plastic 254 74 40 560 x 370 x 655 14.5 455 986-1E 3800.00

1380 plastic 200 67 48 490 x 390 x 780 10.5 111 189-1E 1850.00

2760 plastic 254 2 x 74 65 600 x 480 x 920 20 727 625-1E 5380.00

3600 plastic 254 3 x 74 70 720 x 510 x 975 27.6 727 626-1E 4450.00

2400 plastic 254 2 x 74 70 680 x 510 x 990 25.4 175 945-1E 5630.00

2760 stainless steel 254 2 x 74 55 710 x 570 x 1070 43 111 190-1E 11450.00

2760 stainless steel 254 2 x 74 75 490 x 575 x 880 27.8 727 629-1E 7480.00

Ref. RON / pack

760 744-1E 315.00

906 323-1E 595.00

watt

YELLOW = Ex stock

Telefon 0250 702 110 service@kaiserkraft.ro

906 323-1E 595.00

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

451

Vacuum cleaners 2

1–4

5 Additional socket

High quality for professional use in industry and trade • High quality dirt container, impact resistant, corrosion resistant and limited chemical resistance • Float-switch with effective anti-foam device • High performance suction motors with sound insulation • Euro size filter with coated surface for greater filtering capacity and longer operational life • For vacuums with multiple motors, the turbines are individually s witchable

Suitable 120 litre waste sacks can be found on page 502 and 503.

Wet and dry vacuum cleaners Connection voltage 230 V. Cable length 8 m. Standard equipment Ø 40 mm 3.5 m suction hose and crevice nozzle.

23103

452 www.kaiserkraft.ro

Robust stainless steel container. Chassis with 4 swivel castors. Electric plug socket on the vacuum cleaner.

5 + 6 Industrial vacuum cleaners

1 + 2 Universal vacuum cleaners

Very easy to manoeuvre due to dolly with 2 swivel castors and 2 fixed castors. Drainage hose for quick and convenient disposal of liquids.

Grey, durable plastic container. Chassis with 4 swivel castors. Practical electric plug socket on the vacuum cleaner.

Model Container material Number of motors Power consumption Air flow Container capacity Length x width x height Ref. RON Accessories Filter bags Pack of 10 pcs. Micro-filter cartridge Floor nozzle

High performance industrial and ATEX compliant vacuum cleaners suitable for continuous operation available on request.

3 + 4 Workshop vacuum cleaners

1 – a Max. vacuum pressure 230 mbar.

Waste sack filling

watt l/min l mm

Ref. RON / pack Ref. RON Ref. RON Ref.

plastic

stainless steel

plastic

stainless steel

1 1200 2850 37 470 x 470 x 650 111 192-1E 2050.00

2 2400 5650 62 510 x 510 x 900 111 193-1E 3500.00

1 1200 3580 33 470 x 470 x 650 111 195-1E 2350.00

2 2400 5650 50 510 x 510 x 900 111 196-1E 3700.00

3 3600 8500 62 550 x 550 x 1060 111 194-1E 4650.00

2 2400 5650 50 550 x 550 x 1060 111 197-1E 3800.00

111 205-1E 340.00 759 869-1E 595.00

294 411-1E 675.00 759 869-1E 595.00

111 205-1E 340.00 759 869-1E 595.00

294 411-1E 675.00 759 869-1E 595.00 759 867-1E 2150.00

111 204-1E

294 411-1E 675.00 759 869-1E 595.00 759 867-1E 2150.00 111 204-1E

1250.00

RON

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

BLUE = Short delivery period

23103

High quality wet and dry vacuum cleaners

Vacuum cleaners Cuttings

8 8

Many accessories included

Manual filter cleaning

9 7 7 Industrial vacuum cleaner Ideal for heavy dirt, coarse dirt and noncorrosive liquids. Tilting chassis with two swivel castors and two fixed castors. The stainless steel waste container simply tilts forward to empty (tilting height 200 – 400 mm).

8 Vacuum cleaner for shavings Ideal for the metal working industry and trades. Easy to manoeuvre due to two swivel c astors and two fixed castors. Stainless steel container. Many accessories included Separation plate for shavings for separate disposal. Drainage hose for disposal of liquids. Chemical and oil resistant PUR suction hose.

ENVIRONMENT

Manual filter cleaning

9 + a Safety industrial dry vacuum cleaners

Safe vacuuming, including fine dusts up to dust class M. Dust retention capacity 99.99 %. Large bag filter with coated surface, 1.2 m² filter surface. Effective and easy filter cleaning enables longer work periods. Lowering the stainless steel container ensures easy disposal of contents. Robust dolly with two swivel castors and two fixed castors. Practical accessory holders at the front of the vacuum cleaner.

Machine cleaning set

Industrial cleaning set

Accessories Paper or fibre filter bags for convenient disposal of dust and dirt. Pack of 10. Micro-filter cartridge as an additional filtering stage to maintain clean exhaust air. Floor nozzle with brush roller for vacuuming large areas, working width 600 mm. Attaches to dolly. Waste sack filling with waste container attachment enables vacuuming and disposal directly into a standard 120 litre waste sack.

With waste sack filling Model Container material Number of motors Power consumption Air flow Container capacity Length x width x height Ref. RON Accessories Filter bags Pack of 10 pcs. Micro-filter cartridge

watt l/min l mm

Ref. RON / pack Ref. RON Ref. RON Ref. RON

Floor nozzle

23104

Waste sack filling

YELLOW = Ex stock

stainless steel

3 3600 8500 95 580 x 580 x 1100 600 209-1E 5380.00

2 2400 5650 95 580 x 580 x 1100 111 199-1E 9230.00

1 1400 3580 27 500 x 840 x 1000 111 200-1E 11950.00

2 2400 5650 27 500 x 840 x 1000 111 202-1E 12750.00

294 411-1E 675.00 759 869-1E 595.00 759 867-1E 2150.00 600 214-1E 1280.00

759 869-1E 595.00 759 867-1E 2150.00 600 214-1E 1280.00

Telefon 0250 702 110 service@kaiserkraft.ro

Industrial cleaning set Ø 40 mm Consisting of multiple part extension tube, wet suction nozzle, dry suction nozzle and round PVC brush. Ref. 600 198-1E

RON / set 1230.00

Machine cleaning set Consisting of large suction nozzle, PP round brush, angled nozzle and tapered nozzle. Ref. 111 203-1E

RON / set 875.00

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

453

High pressure cleaners 2–5 2

1 Additional Kärcher products available on request.

High pressure cleaners Effortless cleaning of machines, work areas etc.

1 Cold water high pressure cleaner

For occasional use

K5 Full Control Home With high power, water cooled motor. For medium heavy soiling at an area coverage of 40 m²/h. Extra sturdy due to low centre of gravity. Full Control Power Gun with pressure level display and practical accessory holder on the device. Effortless cleaning of machines, work areas, etc. Fully retractable for space saving storage. Standard equipment 8 m high pressure hose, high pressure pistol, full control power gun, Vario Power steel tube, dirt grinder, integrated water filter, stone, facade and surface cleaner.

HD 5/11 P

HDS 5/15 UX

Also includes a 10 m high pressure hose and single power nozzle (15°).

Hot water high pressure cleaner. Ideal for frequently changing work sites and operating times of up to approx. 1 hour. Leakproof pump and fuel tank for horizontal transport. Low water indicator and exhaust temperature sensor. Max. temperature 80 °C. Heating oil consumption 2.4 kg/h. Standard equipment 15 m high pressure hose, extended spray pistol, 550 mm s tainless steel spray lance, three position angled nozzle.

HD 6/15 M Plus Also includes a 10 m high pressure hose, brass water intake, dirt blaster and three-angle nozzle (0°, 25°, 40°).

HD 6/15 MX Plus Also includes a 15 m rotating (anti-twist) high pressure hose, brass water intake, hose drum with mounts on both sides, dirt blaster and three-angle nozzle (0°, 25°, 40°).

1 – 5 Rotating cleaning brush

5 Hot water high pressure cleaner

Powered by the water jet. For the non-damaging removal of fine dust and grey films from all surfaces. Temperature resistant up to 80 °C.

For professional use

2 – 4 Professional cold water high pressure

Cup foam lance

cleaner

For professional use Ideal for frequently changing work sites. Compact design with low weight and additional carrying handle. Suitable for vertical and horizontal operation. Ergonomic easy-press hand spray gun, spray lance 850 mm, anti-twist system, automatic pressure relief, accessory holder on the device. Standard equipment Easy-press pistol, rotating stainless steel pipe 850 mm.

Accessories

2 – 5 Short, compact foam lance with 1 litre container for easy generation of foam. Ref. 614 407-1E RON 875.00

Model Pressure Pump rate Voltage Weight Ref. RON Accessories Rotating cleaning brush

bar l/h V kg

20 – 145 500 230 17.45 453 392-1E 2650.00

110 490 230 17.5 117 317-1E 4350.00

150 560 230 30 521 266-1E 6480.00

150 560 230 29.3 521 267-1E 6630.00

150 450 230 76 175 942-1E 13750.00

Ref. RON

175 941-1E 300.00

175 940-1E 625.00

Sweeping machines 1 + 2 Manual cleaning of indoor and outdoor areas Sweeping machine 1 Main sweep roller with motor drive on Manoeuvrable, space saving sweeping machine which requires minimal effort to push. Ergonomic handling due to push handle with 3 adjustment settings. Very good sweeping capacity on both sides.

both sides and side brushes adjust to 3 positions. Roll-in principle. 2 Main sweep roller with motor drive on both sides, 6 adjustment settings for height of main sweep rollers and 2 folding side brushes.

Model

1 454 www.kaiserkraft.ro

Max. sweeping capacity Container capacity Sweeping width Length x width x height Ref. RON

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

m²/h l mm mm

2800 42 700 1300 x 810 x 1040 614 405-1E 2850.00

3680 42 920 1300 x 960 x 1050 985 196-1E 3700.00

BLUE = Short delivery period

23603

70/15 C + 70/20 C 2SB

Outdoor waste collectors Litter grabbers and litter spikes Handle made of anodised aluminium tube with a plastic handle. Litter grabbers have a mechanism that is subject to little wear, as the cable pulls are on the inside. The litter spike has a screw-on steel spike. Pack of 2.

1 Litter spike

For soft ground, e.g. lawns and beaches.

2 Grabber with steel claws

For picking up rubbish from the ground in outdoor areas.

3 Short grabber, plastic coated

For emptying waste paper bins, wash basins etc.

4 Grabber, plastic coated

For fast work on smooth surfaces, for gripping smooth objects, e.g. bottles, cans, etc.

Waste collection trolleys

ONLINE! Length Model Ref. RON / pack

Grabber with steel claws

980

900

919 361-1E 180.00

919 355-1E 390.00

Short grabber, plastic coated

1050 919 356-1E 400.00

Grabber, plastic coated

450

920

919 358-1E 390.00

919 359-1E 390.00

1070 919 360-1E 390.00

Flame-retardant waste collectors • • • •

Flame retardant when the access flap is closed Self closing flap locks in odours Made of extremely robust plastic (PE) Ideal for indoor and outdoor use

For outdoor

Selfextinguishing

ENVIRONMENT

Litter spike

2 Designed for extreme weather conditions, 1 access flap.

4 Waste collector with steel ashtray insert, 1 access flap.

3 + 4 Large capacity with 2 access flaps.

Developed for high traffic areas. Firmly attached lid for easy emptying.

Model

Capacity Height Width x depth black beige

26310

Accessories PE waste sacks Pack of

YELLOW = Ex stock

Plinth available on request

722 834-1E 2500.00

133 1041 546 x 546 604 617-1E 604 616-1E 2100.00

170 1054 632 x 632 604 619-1E 604 618-1E 2450.00

250 928 015-1E 400.00

200 754 938-1E 545.00

100 511 919-1E 825.00

l mm mm Ref. Ref. RON

57 930 390 909 641-1E 722 829-1E 1130.00

80 1070 455 909 643-1E 722 830-1E 1450.00

57 965 395

80 1075 460

722 833-1E 2100.00

pcs. Ref. RON / pack

250 928 015-1E 400.00

Telefon 0250 702 110 service@kaiserkraft.ro

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

455

Outdoor waste collectors Waste collectors For outdoor

Floor mounting

• For indoor and outdoor use • Robust, zinc plated sheet steel design, additionally powder coated • With clamp ring to hold 120 l plastic or paper waste sacks • Base with holes for secure anchoring • Easy changing of waste sacks

1 + 2 With silver coloured plastic lid, the lids are the same colour as the housing for green and yellow containers.

1 Open version

Sheet steel front panel, open at rear.

2 With single door

Ideal for heavy waste such as glass etc. The door protects the sacks from adverse weather and damage.

3 With double doors and metal lid Ideal for outdoor use. Fireproof. The rear facing double doors protect the sacks from adverse weather and damage. With metal lid in same colour as housing.

Model Height Opening Ø charcoal blue yellow green red white

mm mm Nr. Nr. Nr. Nr. Nr. Nr. RON

900 350 672 505-1E 672 645-1E 672 688-1E 754 806-1E 672 521-1E 713 393-1E 875.00

900 350 713 460-1E 713 466-1E 714 845-1E 672 718-1E 713 462-1E 672 734-1E 1250.00

980 395 713 461-1E 713 467-1E 713 468-1E 610 038-1E 713 464-1E 713 463-1E 1380.00

3 Suitable 120 litre waste sacks can be found on page 502.

Waste collectors For outdoor

• Ideal for outdoor use – such as in car parks etc. • With separate inner container made of sheet steel • Fitted with holes for optional floor anchoring

1 Made of sheet steel With inner bin

Powder coated, charcoal RAL 7016.

2 + 3 Clad in wooden slats

Steel base frame, powder coated in charcoal RAL 7016.

Floor mounting

Model

1000 300 30 sheet steel

860 860 400 400 50 50 steel / spruce steel / meranti

Suitable benches can be found on pages 804 and 805.

456 www.kaiserkraft.ro

1 mm mm l

Ref. RON

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

111 389-1E 1900.00

111 390-1E 2100.00

BLUE = Short delivery period

111 391-1E 2450.00

23106

Height Opening Ø Capacity Waste collector material

Waste collectors

40 and 50 litre capacity • Container can be removed for easy emptying • Perforated base

1 Hood powder coated in orange 2 With integrated ashtray flap

Made of hot dip galvanised sheet steel. Suitable for mounting to walls or posts, permanently welded hood and mounting rail, with perforated base for water drainage. Container secured by triangle lock on the inside, can be pivoted and r emoved to the front. Including keys.

Accessories

For outdoor

Tubular steel post Zinc plated, length 1500 mm, Ø 60 mm.

Model Capacity Height Width x depth Weight Ref. RON Accessories Tubular steel post

Lockable

l mm mm kg

40 600 310 x 360 13 175 626-1E 1230.00

50 685 310 x 360 14 175 628-1E 1300.00

Ref. RON

175 630-1E 300.00

Wall and floor mounting

50 litre waste paper bin, DIN 30713 compliant Incl. bracket for wall mounting Accessories

Height x width x depth

mm 770 x 430 x 320

Weight orange, similar to RAL 2011

kg Ref.

5.5 483 843-1E

green, similar to RAL 6017

Ref. RON

483 844-1E 475.00

Ref. RON

483 845-1E 325.00

Accessories Tubular steel post

Tubular steel post

For outdoor

ENVIRONMENT

Made of high quality, UV resistant, high density polyethylene (HDPE) Bracket for fastening to walls, masts and posts with clamp bands supplied by the customer. Supplied complete with triangular key.

50 litre waste paper bin set, DIN 30713 compliant Includes bracket for fastening to masts, posts, walls and buildings, and tubular steel posts for setting in concrete, length 1250 mm, Ø 50 mm and clamp bands. Supplied complete with triangular key. Container colour orange, similar to RAL 2011 green, similar to RAL 6017

Ref.

RON

483 847-1E 483 848-1E

645.00 645.00

Lockable

645.00

Wall and floor mounting

RON / set Nr. 483 847-1E

Robust waste collectors 30 and 65 litre capacity • Lockable • Frame and base plate completely hot dip galvanised • Delivered fully assembled

2 65 litre waste collector

For outdoor

With or without ashtray insert. Hood made of sheet steel in container colour. Top part serves as a clamping mechanism for waste sacks. Theft-proof due to two square locks, key included. Easy changing of waste sacks.

Made of hot dip galvanised or powder coated sheet steel.

Lockable

1 30 litre waste collector

Perforated sheet steel ensures drainage of rain water. Theft-proof due to triangle lock, key included.

Accessories Zinc plated bicycle parker with space for 4 bicycles. Mounting material included. Ref. 607 572-1E

26395

Model Capacity Design Height Width x depth Weight moss green RAL 6005 hot dip galvanised antique silver

l mm mm kg Ref. Ref. Ref. RON

RON / each 695.00

30 without hood 900 490 x 430 17.5 122 847-1E 122 845-1E

2300.00

YELLOW = Ex stock

with hood 1150 490 x 400 21.5 122 855-1E 122 853-1E

with hood 1145 580 x 380 21.4

with ashtray 1145 580 x 380 24.4

607 566-1E

607 571-1E

2650.00

3150.00

1 with ashtray 1145 580 x 380 22.4 607 570-1E

with ashtray 1145 580 x 380 21.5

3150.00

122 856-1E 3150.00

Telefon 0250 702 110 service@kaiserkraft.ro

Without hood

With hood

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

457

Outdoor waste collectors For outdoor

With inner bin

Waste collectors With ashtray insert and protective hood Floor mounting

Lockable

Includes zinc plated inner bin and cigarette stub sieve. Fixing materials for permanent installation included.

Made of zinc plated, powder coated sheet steel. Protective hood and ashtray insert can be removed with square key lock (1 key included). Height x width x depth

910 x 395 x 395

955 x 500 x 500

Waste collector capacity moss green RAL 6005 gentian blue RAL 5010 flame red RAL 3000 black grey RAL 7021

l Ref. Ref. Ref. Ref. RON

38 900 604-1E 900 606-1E 900 607-1E 900 608-1E 2200.00

80 927 067-1E 927 068-1E 927 069-1E 927 070-1E 2650.00

Ref. RON / pack

927 220-1E 190.00

Sand filling

Accessories Quartz sand Pack of

Plastic waste collectors 80 and 120 litre capacity For outdoor

• Ideal for outdoor use as they are weather and corrosion resistant • Lockable • Large access openings on both sides • Large, zinc plated inner container

Made of robust and durable polyethylene (PE). Lockable with triangular key (supplied with one triangular key). Includes fastening material for anchoring to floor.

Floor mounting

Lockable

Capacity

With inner bin

Height x width x depth Weight blue green yellow grey

120

mm kg Ref. Ref. Ref. Ref. RON

950 x 530 x 530 16 610 989-1E 610 990-1E 610 991-1E 610 993-1E 1600.00

1050 x 580 x 580 20 610 994-1E 610 995-1E 610 996-1E 610 997-1E 1800.00

Pedestal ashtrays For indoor and outdoor use For outdoor

Floor mounting

Made of powder coated sheet steel or stainless steel. Two-part construction. With removable zinc plated sieve and insert to save sand. Recommended amount of sand per filling approx. 8 kg. Overall height 965 mm, Ø 440 mm.

Hood Made of powder coated sheet steel. Can be secured with padlock and chain (included). Colour the same as ashtray, stainless steel version silver coloured.

Base disc Made of hot dip galvanised sheet steel. Includes mounting material to bolt in place. stainless steel

flame red RAL 3000

gentian blue RAL 5010

Ref. RON

607 545-1E 2450.00

755 084-1E 1650.00

755 085-1E 1650.00

Flame red RAL 3000

458 www.kaiserkraft.ro

Gentian blue RAL 5010

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

Black grey RAL 7021

black grey RAL emerald green RAL 7021 6001 755 086-1E 1650.00

755 088-1E 1650.00

Emerald green RAL 6001

BLUE = Short delivery period

26250

Ashtray colour Sand filling

Ashtrays Safety pedestal ashtrays

For outdoor

Plastic ashtrays for outdoor use • Made of a very robust, special fire retardant plastic • Reduced oxygen flow, chokes flames • Stainless steel mesh grate to stub out cigarettes

Selfextinguishing

The ashtray features a small, rain protected opening that prevents other waste from being thrown in. Only suitable for disposing of cigarette butts. Not suitable for other waste. Eyelets to affix a padlock or another anti-theft device. Easy assembly.

To be weighted down with filling material (sand, stones etc.)

With inner bin

Accessories Special aluminium coated waste sacks For convenient and safe emptying, with pull string to close. FM certified when used in safety pedestal ashtrays made of plastic. Filling material to give the ashtray stability must be placed under the sack.

Height Base Ø grey beige black Accessories Special sacks Pack of 50 pcs.

mm mm Ref. Ref. Ref. RON

965 305 607 047-1E 607 048-1E 607 049-1E 745.00

Ref. RON / pack

944 677-1E 1050.00

RON

745.00

With eyelets for protection from theft

ENVIRONMENT

Ashtray capacity

With inner container, special sack as an accessory

Stainless steel waste collectors Smoking shelters can be found on pages 810 - 812.

Waste collectors with ashtray • With rain protection roof • Double sided access

Ashtray capacity

23604

Made of zinc plated sheet steel, powder coated. Cigarette insertion flaps made of polished stainless steel covers. Easy to empty with tilting mechanism. Lock (1 key). For free standing installation, can also be secured to the ground if required.

YELLOW = Ex stock

• • • •

Waste collector capacity Height x width x depth gentian blue RAL 5010 light ivory RAL 1015 moss green RAL 6005 black grey RAL 7021 pearl light grey, similar to RAL 9022

l mm Ref. Ref. Ref. Ref. Ref. RON

35 960 x 300 x 250 502 354-1E 927 987-1E 502 355-1E 927 989-1E 505 400-1E 2200.00

60 960 x 480 x 250 505 402-1E 505 401-1E 505 403-1E 927 990-1E 505 405-1E 2450.00

Telefon 0250 702 110 service@kaiserkraft.ro

Reinforced protective hood Extremely durable Suitable for indoor and outdoor use Includes zinc plated inner bin and cigarette stub sieve

Made of stainless steel to DIN 1.4301, ground finish. Removable protective hood and ashtray insert, with square lock. Key and mounting material for permanent installation included.

Waste collector capacity Height x width x depth Ref. RON

910 x 395 x 395 505 515-1E 3250.00

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

459

Ashtrays

2 For outdoor

Selfextinguishing

RON

575.00

With inner bin

Plastic safety ashtrays • Low maintenance and cleaning costs • Made of a very robust, special fire retardant plastic • Reduced oxygen flow chokes flames • Rain protected openings on both sides, Ø 38 mm Stable, can be secured to the floor. Large internal container made of zinc plated sheet steel for long cleaning intervals. Easy to open via rotary closure. Selfextinguishing

Floor mounting

Wall and pedestal ashtrays

Aluminium pedestal ashtrays

Safe, user friendly ashtray

The space saving ashtray in an attractive design

• For indoor and outdoor use • High capacity – lower maintenance costs • Easy to empty – without having to touch cigarette waste • Large stub-out surface made of rust free steel and 360° opening • Large footprint, can be anchored to floor, lockable

• Easy to empty without key or tool • With plate to stub out cigarettes • Heavy base (Ø 324 mm) for optimum stability

Model Height x Ø

23108

Ref. RON

Base Ø Ashtray capacity grey black green

mm l Nr. Nr. Nr. RON

420 15 927 188-1E 927 189-1E 927 190-1E 575.00

Floor mounting

Made of zinc plated and powder coated sheet steel.

460 x 300

1000 x 400

2.3

4.9

605 472-1E 1280.00

605 467-1E 1950.00

460 www.kaiserkraft.ro

980

Model Height x Ø

1000 x 330

1010 x 400

15.5

25.4

605 469-1E 1480.00

605 470-1E 1600.00

Height x Ø Ashtray capacity

Made of black powder coated, fire resistant, corrosion free aluminium.

3 Made of stainless steel and powder coated sheet steel.

Height

Ashtray capacity Ref. RON

1041 x 324

4 605 471-1E 875.00

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

23108

For outdoor

For disposing of cigarette butts only. Not suitable for other waste.

BLUE = Short delivery period

Ashtrays All articles on this page

Selfextinguishing

With inner bin

For outdoor

Lockable

1500.00

Designer ashtrays Pedestal ashtrays and combination ashtrays for indoor and outdoor use

RON Nr. 521 198-1E

Floor mounting

• Durable, high quality sheet steel construction • Stainless steel plate to put out cigarettes • Access openings on multiple sides

Model Waste collector capacity Ashtray capacity Height x width x depth

l l mm

Ref. RON

Ashtray made of zinc plated, powder coated sheet steel housing. Charcoal RAL 7016. Ideal for use in exposed outdoor areas.

3 1065 x 300 x 300 614 451-1E 775.00

8 2 1045 x 405 x 260 521 198-1E 1500.00

Wall ashtrays

Zinc plated inner container for quick and easy emptying. Can be anchored to the floor with included accessory. Lockable with triangular key (included with delivery).

12.5 1045 x 405 x 260 607 077-1E 1380.00

20 2.3 895 x 330 x 280 521 201-1E 2050.00

29 3 990 x 300 x 250 111 322-1E 2050.00

48 4.7 990 x 480 x 250 111 323-1E 2600.00

Designer wall ashtrays for indoor and outdoor use • • • •

ENVIRONMENT

Durable sheet steel housing Stainless steel plate to put out cigarettes Weather-proof Body made of zinc plated, powder coated sheet steel

Easy wall mounting, supplied with mounting kit. Opens with supplied triangular key.

1 Combination wall ashtray • With an integrated waste collector, capacity 14 l

2+3

2 – 3 Front in charcoal RAL 7016, sides in grey RAL 7040

4 Column shaped ashtray in charcoal RAL 7016

Selfextinguishing

5 Wall ashtray Can be used as a pedestal ashtray with an optional support foot (in accessories).

Model

23608

Ashtray capacity Height Width x depth Ref. RON Accessories Support foot

YELLOW = Ex stock

4 l mm mm

Ref. RON

Telefon 0250 702 110 service@kaiserkraft.ro

3 670 300 x 140 453 098-1E 945.00

1.5 255 155 x 65 521 202-1E 375.00

3 355 195 x 65 521 203-1E 490.00

1 500 105 x 110 727 501-1E 625.00

3 500 100 x 64 493 003-1E 725.00 493 002-1E 625.00

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

461

Ashtrays Pedestal and wall ashtrays Optionally made of aluminium or stainless steel • • • •

For outdoor

urable, high quality construction D Space saving ashtray in an attractive design Floor and wall mounting possible Easy to empty

Lockable

Lockable with triangular key included with delivery. Supplied complete with material for optional mounting. Stainless steel pedestal ashtrays Optionally with or without hood. Small deposit opening to prevent deposit of other rubbish. Aluminium pedestal ashtray Corrosion free, stable pedestal ashtray. Easy to empty due to inner container. Wall ashtray Aluminium version with stainless steel stub plate.

from RON

675.00 Nr. 111 331-1E

Ashtray type

pedestal ashtray

Model Ashtray capacity Material

6 5 7

Ref. RON

wall mounted ashtray

1.4 stainless steel

1.1 stainless steel

4.5 aluminium

1.8 stainless steel

1.7 stainless steel

2.4 aluminium

3.4 aluminium

111 327-1E 1080.00

111 326-1E 1130.00

111 324-1E 1600.00

111 331-1E 675.00

111 330-1E 725.00

111 328-1E 725.00

111 329-1E 845.00

Wall ashtrays Wall ashtrays – optionally available in stainless steel or sheet steel

Selfextinguishing

• H igh quality design • Weather-proof • Lockable Easy to empty due to inside recess for removing the container. Easy wall mounting, mounting materials and triangular key included in delivery.

23109

Material Ashtray capacity Height x width x depth

l mm

Ref. RON

462 www.kaiserkraft.ro

stainless steel 3 320 x 240 x 100

sheet steel 3 320 x 240 x 100

176 455-1E 545.00

176 454-1E 300.00

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

2 23109

Model

BLUE = Short delivery period

Ashtrays 4 1 6

5 2

Model Ashtray type

Safety ashtrays Sturdy, deep drawn manufacture using powder coated sheet steel or stainless steel. Cigarette waste is forced into the container via a funnel shaped lid. No oxygen exchange possible due to small lid opening. Therefore no burning and minimal fumes. Optionally available for wall mounting, with a Ø 190 mm stainless steel hood to provide protection from rain when installed outdoors, or with a black powder coated base, Ø 250 mm. Combination ashtray for ash and waste.

Selfextinguishing

Height x Ø powder coated

graphite silver red

stainless steel

mm Ref. Ref. Ref. RON Ref. RON

wall mounted ashtray

wall mounted ashtray with hood

combination wall ashtray

100 x 90 454 037-1E 454 036-1E 454 035-1E 100.00 454 038-1E 290.00

145 x 150 454 039-1E 454 040-1E 454 041-1E 145.00 454 042-1E 325.00

250 x 180 457 520-1E 457 521-1E 457 522-1E 415.00 457 523-1E 725.00

285 x 190 457 524-1E 457 525-1E 457 526-1E 375.00 457 527-1E 675.00

390 x 190 457 528-1E 457 529-1E 457 530-1E 625.00 457 531-1E 995.00

410 x 180 457 532-1E 457 533-1E 457 534-1E 465.00 457 535-1E 945.00

a b

ENVIRONMENT

Selfextinguishing

Extra large, 6 litre capacity – for less frequent emptying

Model Ashtray type

Height x Ø powder coated

23110

Practical, easy emptying by tilting

YELLOW = Ex stock

stainless steel

graphite silver red

mm Ref. Ref. Ref. RON Ref. RON

pedestal ashtray

pedestal ashtray with hood

combination pedestal ashtray

820 x 150 / 250 457 536-1E 457 537-1E 457 538-1E 500.00 457 539-1E 795.00

820 x 180 / 250 457 540-1E 457 541-1E 457 542-1E 725.00 457 543-1E 1180.00

950 x 190 / 250 457 544-1E 457 545-1E 457 546-1E 745.00 457 547-1E 995.00

950 x 190 / 250 457 548-1E 457 549-1E 457 550-1E 925.00 457 551-1E 1300.00

820 x 180 / 250 457 552-1E 457 553-1E 457 554-1E 925.00 457 555-1E 1400.00

Telefon 0250 702 110 service@kaiserkraft.ro

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

463

Ashtrays Sand filling

Height x Ø

Gentian blue

Graphite Flame red

Granite colour: textured powder coating with high quality surface finish

Charcoal

Ref. 927 220-1E RON / pack

190.00

stainless steel

kg Ref. Ref. Ref. Ref. Ref. Ref. RON Ref. RON

3.6 740 925-1E 740 927-1E 740 928-1E 970 157-1E 970 159-1E 740 971-1E 595.00 740 966-1E 1250.00

3.6 508 814-1E 508 815-1E 508 816-1E 970 160-1E 970 161-1E 508 818-1E 575.00 508 819-1E 1180.00

Silver

665

705

755

Width x depth Waste collector capacity sheet steel charcoal gentian blue flame red granite silver

mm l kg Ref. Ref. Ref. Ref. Ref. RON kg Ref. RON

260 x 260 32 6 740 909-1E 740 910-1E 740 911-1E 970 162-1E 740 912-1E 725.00 5.7 970 188-1E 1180.00

330 x 330 53 10 740 914-1E 740 915-1E 740 916-1E 970 163-1E 740 917-1E 845.00 6.2 970 189-1E 1650.00

430 x 430 96 15 740 920-1E 740 921-1E 740 922-1E 970 164-1E 740 923-1E 1100.00 10.3 970 191-1E 1900.00

Ref. RON

740 954-1E 265.00

141 356-1E 315.00

141 410-1E 350.00

Height

660

700

760

Waste collector diameter Waste collector capacity

mm l kg Ref. Ref. Ref. Ref. Ref. RON Ref. RON

230 17 5 740 931-1E 740 932-1E 740 933-1E 970 165-1E 740 935-1E 645.00 916 172-1E 1150.00

320 37 8 740 937-1E 740 938-1E 740 939-1E 970 167-1E 740 940-1E 845.00 916 173-1E 1650.00

420 69 13 740 943-1E 740 944-1E 740 945-1E 970 168-1E 740 946-1E 1100.00 916 174-1E 2400.00

Ref. RON

740 955-1E 235.00

141 178-1E 340.00

141 232-1E 365.00

Charcoal

464 www.kaiserkraft.ro

Weight

Accessories Inner bin

Sand filling

Granite

Weight

Flame red

Weight charcoal gentian blue flame red granite silver

stainless steel Accessories Inner bin

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

BLUE = Short delivery period

23605

Gentian blue

sheet steel

Inner bin

2+ items

Height

stainless steel

For outdoor

charcoal gentian blue flame red granite graphite silver

1 item

Sand filling

Granite Inner bin

Order quantity Weight powder coated

Silver

For outdoor

Stainless steel

730 x 400

Ashtrays Wall ashtrays Made of powder coated sheet steel or stainless steel Front panel can be tilted upwards. Stainless steel trim. Reversible metal “smoking/no-smoking” sign.

1 – 2 With removable ash box made of zinc plated sheet steel. With deposit opening for rubbish. Ash and rubbish each in a removable insert made of zinc plated sheet steel.

Supplied with mounting materials.

Model Height x width x depth powder coated charcoal gentian blue flame red silver

mm kg Ref. Ref. Ref. Ref. RON Ref. RON

Weight

stainless steel

87 x 140 x 98 1 507 534-1E 507 535-1E 507 536-1E 507 537-1E 275.00 507 538-1E 425.00

125 x 200 x 125 2 507 541-1E 507 542-1E 507 543-1E 507 544-1E 315.00 507 545-1E 595.00

505 x 200 x 125 5.5 507 548-1E 507 549-1E 507 550-1E 507 551-1E 775.00 507 552-1E 1300.00

1 Charcoal

Selfextinguishing

Gentian blue

For outdoor

Flame red

3 Silver

Safety ashtrays Body made of high quality, electrolytically zinc plated, powder coated sheet steel with edge protection to prevent damage to the floor.

Charcoal

Flame red

Silver

Selfextinguishing

For outdoor

Height x Ø

610 x 250

710 x 355

Waste collector capacity Weight charcoal sheet steel gentian blue flame red silver light grey

l kg Ref. Ref. Ref. Ref. Ref. RON Ref. RON

17 4.5 756 807-1E 756 808-1E 756 809-1E 756 810-1E 756 811-1E 425.00 756 812-1E 645.00

44 6.3 970 175-1E 970 176-1E 970 177-1E 970 178-1E 970 193-1E 695.00 970 179-1E 1100.00

l Ref. RON

14 970 192-1E 215.00

39 970 180-1E 290.00

stainless steel Accessories Inner bins Capacity

Light grey

ENVIRONMENT

Cigarette waste is forced into the container via a funnel shaped lid. No oxygen exchange possible due to small lid opening. Therefore no burning and minimal fumes. Removable metal lid, painted black. Aluminium collection pan for cigarette waste. Easy to insert rubbish due to generously proportioned opening.

Gentian blue

Safety combination ashtrays Ashtray/waste collectors with a stylish look • Special ashtray hides cigarette butts • Removable ashtray lid • Fire extinguishing safety waste collector with extinguishing lid

Selfextinguishing

• Housing and ashtray made of zinc plated and a dditionally powder coated sheet steel. Base with rubber ring. Top section always in black similar to RAL 9011.

Waste collector capacity

26251

Height x Ø graphite black, similar to RAL 9011 silver, similar to RAL 9006

mm Ref. Ref. RON

920 x 330 502 518-1E 502 515-1E 845.00

If a fire starts, the rising combustion gases are redirected by the extinguishing lid and accumulate under the opening, the oxygen supply is cut off and the fire is extinguished

Self-extinguishing waste paper bins and waste collectors can be found on page 468.

YELLOW = Ex stock

Telefon 0250 702 110 service@kaiserkraft.ro

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

465

Ashtrays

NEW

Classic waste paper bins Round waste paper bin made of metal • Available in different colours • Fireproof • Wall mounting possible for 30 l waste paper bin

Capacity Height x Ø white silver black red grey aluminium Accessories Plastic sacks Pack of

309 x 255

470 x 335

Ref. Ref. Ref. Ref. Ref. Ref. RON

179 059-1E 179 083-1E 179 060-1E 179 058-1E 179 057-1E 179 090-1E 100.00

179 064-1E 179 097-1E 179 065-1E 179 063-1E 179 062-1E 179 082-1E 250.00

pcs. Ref.

2000 508 853-1E 440.00

2000 985 128-1E 1500.00 179 119-1E 325.00

RON / pack

Ref. RON

Wall brackets

More products

ONLINE! Attractive, semi-perforated waste paper bin made of metal

NEW

• Available in different colours • Fireproof

Capacity

mm Ref. RON Ref. RON

275 x 235 179 084-1E 130.00 179 087-1E 130.00

320 x 260 179 088-1E 165.00 179 089-1E 165.00

405 x 310

179 098-1E 250.00

pcs. Ref. RON / pack

2000 508 829-1E 365.00

2000 508 853-1E 440.00

2000 985 128-1E 1500.00

Height x Ø white black Accessories Plastic sacks Pack of

Push waste collectors The classic waste bin with a large flap With inner bin

Silver

Made of powder coated sheet steel or stainless steel. Self-closing stainless steel flap. Practical trough handles for easy emptying. Black plastic ring on the base protects the floor. Hot dip galvanised, sheet steel inner bin.

Capacity Height x Ø powder coated

Weight flame red silver jet black white

Flame red

466 www.kaiserkraft.ro

White

Waste collector for offices can be found on pages 1028 and 1031.

stainless steel

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

Weight

mm kg Ref. Ref. Ref. Ref. RON kg Ref. RON

740 x 380 4.8 512 556-1E 512 557-1E 512 558-1E 512 560-1E 845.00 4.2 512 561-1E 1280.00

890 x 380 8.4 970 183-1E 970 184-1E 970 185-1E 970 186-1E 1080.00 7 970 187-1E 1380.00

BLUE = Short delivery period

26399

Black

Indoor waste collectors PUSH waste collectors

With inner bin

Sheet steel containers with robust plastic hood • Container made of colour coated sheet steel or rust free stainless steel • Impact resistant, black plastic cover with self-closing stainless steel flap • Plastic floor protection ring • Optionally with or without zinc plated inner container

With zinc plated inner container

Capacity Height x Ø traffic black, similar to RAL 9017 traffic red, similar to RAL 3020 ultramarine blue, similar to RAL 5002 iron grey, similar to RAL 7011 stainless steel Accessories Plastic sacks Pack of

mm Ref. Ref. Ref. Ref. RON Ref. RON

540 x 305 977 813-1E 977 815-1E 977 814-1E 977 812-1E 340.00 977 816-1E 425.00

650 x 310 977 824-1E 977 826-1E 977 825-1E 977 823-1E 415.00 977 827-1E 490.00

820 x 310 977 835-1E 977 895-1E 977 894-1E 977 834-1E 490.00 977 897-1E 500.00

pcs. Ref. RON / pack

2500 985 127-1E 545.00

250 508 861-1E 315.00

250 408 883-1E 475.00

mm Ref. Ref. Ref. Ref. RON Ref. RON

540 x 305 977 820-1E 977 819-1E 977 817-1E 425.00 977 821-1E 490.00

650 x 310 977 830-1E 977 832-1E 977 831-1E 977 828-1E 490.00 977 833-1E 500.00

820 x 310 977 899-1E 977 902-1E 977 901-1E 977 898-1E 525.00 977 903-1E 575.00

pcs. Ref. RON / pack

2500 985 127-1E 545.00

250 508 861-1E 315.00

250 408 883-1E 475.00

ENVIRONMENT

Without inner container

Material collection boxes • • • •

Self-closing, attractive lid with opening Lid lock to hold the swing lid fully open Space saving rectangular shape Four non-slip feet for a firm footing

Housing made of powder coated sheet steel or corrosion free stainless steel. Lid and base made of rigid, impact resistant black plastic.

Waste sack clamp frame

Supplied flat pack – easy self-assembly.

Capacity Height Width x depth black powder coated silver white

23111

stainless steel Accessories Plastic sacks Pack of 250 pcs.

mm mm Ref. Ref. Ref. RON Ref. RON

500 340 x 260 119 143-1E 119 142-1E 119 141-1E 340.00 119 140-1E 440.00

770 340 x 260 119 147-1E 119 146-1E 119 145-1E 390.00 119 144-1E 545.00

Ref.

508 861-1E 315.00

508 942-1E 475.00

RON / pack

YELLOW = Ex stock

Telefon 0250 702 110 service@kaiserkraft.ro

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

467

Indoor waste collectors Self-extinguishing waste paper bins and waste collectors

1–4

Selfextinguishing

• Preventative fire protection at the workplace, in factories, offices and all areas frequented by the public • Self-extinguishing – if a fire starts it is immediately choked by the special e xtinguishing lid • The 15, 20, 30 and 50 litre versions are TÜV/ GS tested

If a fire starts, the rising combustion gases are redirected by the extinguishing lid and accumulate under the opening, the oxygen supply is cut off and the fire is extinguished

Body and extinguishing lid made of powder coated sheet steel or completely made of stainless steel. The special extinguishing lid cuts off the oxygen supply – potential fires are choked before they can start. Different body colours can be used for the separation of recyclable waste.

5 2

Model Capacity Height x Ø Opening Ø Waste collector material sheet steel

Body / extinguishing lid light grey RAL 7035 / light grey RAL 7035 flame red RAL 3000 / graphite black RAL 9011 graphite black RAL 9011 / graphite black RAL 9011 flame red RAL 3000 / flame red RAL 3000 grey white RAL 9002 / grey white RAL 9002 cobalt blue RAL 5013 / graphite black RAL 9011 white aluminium RAL 9006 / graphite black RAL 9011

stainless steel

stainless steel / stainless steel

l mm mm

15 360 x 255 110

20 426 x 260 110

30 470 x 335 115

50 625 x 335 115

80 540 x 470 165

110 720 x 450 170

200 950 x 600 205

Ref. Ref. Ref. Ref. Ref. Ref. Ref. RON Ref. RON

714 811-1E 714 815-1E 714 816-1E 917 512-1E 917 513-1E 917 514-1E 917 515-1E 275.00 915 757-1E 595.00

927 857-1E 927 858-1E 927 859-1E

714 812-1E 714 818-1E 714 819-1E 917 526-1E

927 861-1E 927 860-1E 350.00

917 528-1E 917 529-1E 415.00 915 758-1E 675.00

714 813-1E 714 821-1E 714 822-1E 917 530-1E 917 531-1E 917 533-1E 917 534-1E 475.00 915 759-1E 925.00

917 517-1E 917 518-1E 917 521-1E 917 519-1E 917 520-1E 917 522-1E 917 523-1E 795.00

714 814-1E 714 824-1E 714 825-1E 917 535-1E 917 536-1E 917 537-1E 917 538-1E 875.00

917 525-1E 1600.00

pcs. Ref. RON / pack

500 722 756-1E 275.00

250 508 861-1E 315.00

360 985 144-1E 365.00

250 928 015-1E 400.00

150 695 807-1E 725.00

Accessories PE waste sacks

PREMIUM self-extinguishing waste collectors For professional use

Selfextinguishing

• Single piece body manufactured using deep drawing process • Seamless and absolutely leakproof • TÜV/GS tested (German technical standards) Modern, attractive design. Very stable due to solid construction. Certified as flame extinguishing with lid in place.

1 + 2 Made of powder coated sheet steel Black RAL 9004.

3 + 4 Made of brushed aluminium Very robust and durable, also suitable for use in damp environments.

Model

4 3

468 www.kaiserkraft.ro

Capacity Height x Ø Opening Ø Ref. RON

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

l mm mm

13 302 x 260 120 944 694-1E 350.00

20 342 x 300 120 944 695-1E 425.00

13 341 x 240 120 944 692-1E 465.00

20 381 x 280 120 944 693-1E 675.00

BLUE = Short delivery period

23113

NEW

Designer foot pedal bins • Lid closes quietly and keeps odours in by means of Soft Close lid damper • Large opening angle for easy filling • Stable and non-tilting due to rubber base ring • Practical carrying handle integrated in the lid hinge

Capacity

Housing and lid made of powder coated sheet steel or stainless steel.

Height x Ø sheet steel, powder coated

Ergonomic handling due to the all-round pedal – it can a lso be operated from the side. Plastic inner container With rubbish sack clamping ring for holding waste sacks in place.

black red white silver

stainless steel Accessories Waste sacks

mm Ref. Ref. Ref. Ref. RON Ref. RON

465 x 263 532 817-1E 532 818-1E 532 819-1E 532 820-1E 365.00 532 821-1E 390.00

642 x 308 532 811-1E 532 812-1E 532 813-1E 532 814-1E 595.00 532 815-1E 645.00

Ref. RON / pack

722 756-1E 275.00

With inner bin

ENVIRONMENT

With inner bin

Pedal bins for recyclable waste • Large opening angle makes filling easy • With set of stickers for easy separation of recyclables • Hygienic pedal mechanism on the inside • Ergonomic wide pedal • Lid closes quietly and keeps odours in, by means of Soft Close lid damper Body made of plastic coated sheet steel or rust free stainless steel. Inner container Made of plastic, with bar handle.

Inner containers

26400

Height x width x depth sheet steel, powder coated

silver RAL 9007 jet black RAL 9005 white RAL 9003

stainless steel

YELLOW = Ex stock

1 x 17

2x9

3x9

1 x 9 / 1 x 17

mm Ref. Ref. Ref. RON Ref. RON

440 x 320 x 250 453 953-1E 453 952-1E 453 951-1E 300.00 453 950-1E 325.00

440 x 320 x 250 453 959-1E 453 958-1E 453 957-1E 325.00 453 956-1E 375.00

440 x 470 x 250 453 971-1E 453 970-1E 453 969-1E 375.00 453 968-1E 400.00

440 x 470 x 250 453 965-1E 453 964-1E 453 963-1E 375.00 453 962-1E 415.00

Telefon 0250 702 110 service@kaiserkraft.ro

Waste sacks Made of grey polyethylene. Pack of 30 rolls, 50 sacks per roll. For volume

Ref. RON / pack

983 735-1E 775.00

983 736-1E 845.00

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

469

Indoor waste collectors OPEN TOP waste collectors No finger print

With inner bin

• Open slot – for direct disposal without flap or lid • With a practical waste sack clamping mechanism and floor protection ring • Including plastic inner container

Made of stainless steel or powder coated sheet steel. The high quality and functional design is an eyecatcher in every professional indoor environment.

Capacity Height x Ø powder coated

mm Ref. Ref. Ref. Ref. RON Ref. RON

430 x 240 176 469-1E 176 468-1E 176 467-1E 176 466-1E 400.00 176 463-1E 365.00

570 x 305 176 473-1E 176 472-1E 176 471-1E 176 470-1E 545.00 176 464-1E 475.00

692 x 305 176 477-1E 176 476-1E 176 475-1E 176 474-1E 625.00 176 465-1E 545.00

pcs. Ref. RON / pack

2000 508 853-1E 440.00

2000 985 128-1E 1500.00

360 985 145-1E 235.00

white red cream black

stainless steel Accessories Plastic sacks Pack of

Stainless steel pedal bins waste collectors No finger print

With inner bin

• Stainless steel components with no-fingerprint finish • Lid closes gently and quietly • Lid can be locked in open position for prolonged use or when changing waste sacks • Including plastic inner bin and waste sack clamping ring

Capacity

Height x Ø

Accessories Plastic sacks Pack of

1 Stainless steel pedal waste collector

2 Stainless steel pedal waste collector with handles

With attractive spherical flap and hydraulic pedal opening.

mm Ref. RON mm Ref. RON

400 x 250 176 482-1E 265.00 412 x 250 176 479-1E 300.00

465 x 292 176 483-1E 400.00 484 x 292 176 480-1E 415.00

665 x 292 176 484-1E 490.00 660 x 292 176 481-1E 500.00

pcs. Ref. RON / pack

2000 508 845-1E 415.00

2000 985 128-1E 1500.00

360 985 145-1E 235.00

Pedal bins With inner bin

Selfextinguishing

No finger print

• Removable inner container, zinc plated with metal carrying handle • Plastic lid hinge with recessed grip as carry handle, black • High quality, stable designer pedal: metal/plastic, silver/black • Plastic base ring incl. 3 anti slip feet, black

Housing and lid made of powder coated sheet steel or stainless steel. Zinc plated inner container with bar handle. Tested self-extinguishing design. Suitable waste sacks available as an accessory.

Model Capacity Height x Ø sheet steel

white silver

stainless steel Accessories Waste sacks Pack of 30 pcs.

470 www.kaiserkraft.ro

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

l mm Ref. Ref. RON Ref. RON

12 360 x 280 480 315-1E 480 316-1E 230.00 480 313-1E 315.00

18 530 x 280 480 325-1E 480 326-1E 325.00 480 323-1E 400.00

Ref. RON / pack

983 736-1E 845.00

985 127-1E 545.00

BLUE = Short delivery period

23613

Indoor waste collectors

With inner bin

No finger print

Stainless steel recyclable waste collectors Robust recyclable waste collectors made of stainless steel with special no-fingerprint finish. Suitable for professional use in industry and indoor areas.

RON Nr. 115 664-1E

350.00

Model Capacity Height x width x depth Ref. RON Accessories Plastic sacks Pack of

With inner bin

l mm

pcs. Ref. RON / pack

20 446 x 360 x 320

40 650 x 398 x 345

50 650 x 500 x 345

18 + 28 650 x 500 x 345

115 660-1E 465.00

115 661-1E 845.00

115 662-1E 995.00

115 663-1E 895.00

2000 508 845-1E 415.00

360 985 145-1E 235.00

150 741 118-1E 675.00

2500 985 127-1E 545.00

ENVIRONMENT

• Internal pedal mechanism • Lid closes quietly • Lid can be locked in open position for prolonged use • Stands securely due to rubber feet • Plastic inner bin with handles for easy emptying

No finger print

Designer waste collectors • Lid closes softly and quietly, keeps odours in • Stainless steel parts with no-fingerprint finish • Plastic inner bin with handles • Rubbish sack clamping ring • Non-slip rubber feet

Attractive waste collectors, which can be placed against walls or in corners due to their shape. Lid and pedal made of brushed stainless steel. There is a wall protection bar on the straight part of the back of the c ollectors. The flexible lid opening mechanism m akes it easier to fill and empty the collectors.

Model Capacity Height x width x depth sheet steel, painted

white

stainless steel

23114

Accessories Plastic sacks Pack of

YELLOW = Ex stock

Telefon 0250 702 110 service@kaiserkraft.ro

l mm

18 524 x 298 x 336

30 690 x 340 x 375

50 705 x 406 x 406

2 x 22 705 x 406 x 406

Ref. RON Ref. RON

115 666-1E 375.00 115 664-1E 350.00

115 668-1E 465.00 115 667-1E 500.00

115 670-1E 775.00 115 669-1E 845.00

115 672-1E 645.00 115 671-1E 725.00

pcs. Ref. RON / pack

2000 508 829-1E 365.00

2000 985 128-1E 1500.00

360 985 145-1E 235.00

2000 508 829-1E 365.00

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

471

Designer stainless steel waste collectors with pedal, square With inner bin

With charcoal filter to reduce odours as an accessory

No finger print

• • • • •

on-fingerprint finish N Soft close lid with hold open function as a lid catch Anti-slip base Inner container with recesses for affixing the rubbish bag Sturdy pedal

Attractive stainless steel waste collector for use within the company.

1 Model Capacity Height x width x depth Pack of Ref. RON Accessories Waste sacks Pack of

l mm pcs.

6 287 x 210 x 285 2 522 616-1E 340.00

9 314 x 240 x 328 1 522 617-1E 325.00

12 405 x 240 x 328 1 522 618-1E 300.00

20 531 x 270 x 355 1 522 619-1E 475.00

32 623 x 305 x 393 1 522 620-1E 625.00

pcs. Ref. RON / pack

30 754 891-1E 220.00 522 621-1E

30 983 735-1E 775.00 522 621-1E

2000 508 845-1E 415.00 522 621-1E

2500 985 127-1E 545.00 522 621-1E

360 985 145-1E 235.00 522 621-1E

120.00

Charcoal filters for waste collectors

Ref.

Pack of 10 pcs.

RON / pack

Designer stainless steel waste collectors with pedal With inner bin

Oval shape

No finger print

• • • • •

Model

Non-fingerprint finish Soft close function Lockable lid Anti-slip base Plastic inner container with waste sack holder

Capacity Height x width x depth Pack of Ref. RON Accessories Waste sacks Pack of

Particularly attractive designer foot pedal bin in an oval shape. Ideal for use in offices and workshops.

l 6 8 12 20 30 35 40 mm 300 x 242 x 232 338 x 274 x 259 375 x 301 x 274 426 x 356 x 325 641 x 356 x 325 596 x 396 x 355 680 x 396 x 355 pcs. 2 2 1 1 1 1 1 522 638-1E 522 640-1E 522 641-1E 522 642-1E 522 644-1E 522 645-1E 522 646-1E 210.00 300.00 215.00 325.00 400.00 440.00 475.00

pcs. Ref. RON / pack

30 754 891-1E 220.00

30 983 735-1E 775.00

2000 508 845-1E 415.00

2000 985 128-1E 1500.00

Stainless steel waste collectors with pedal • • • •

on-fingerprint finish N Lid with soft close function Lockable lid Anti-slip base

Attractive stainless steel foot pedal bin made of brushed stainless steel. With inner container. For use within the company.

Model With inner bin

472 www.kaiserkraft.ro

Capacity Height x width x depth Ref. RON Accessories Plastic sacks Pack of

l mm

12 421 x 270 x 266 522 632-1E 215.00

20 428 x 356 x 336 522 633-1E 350.00

35 638 x 356 x 336 522 634-1E 440.00

50 692 x 416 x 376 522 636-1E 595.00

pcs. Ref. RON / pack

2000 508 845-1E 415.00

2000 985 128-1E 1500.00

360 985 145-1E 235.00

150 741 118-1E 675.00

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

BLUE = Short delivery period

26401

No finger print

Stainless steel recyclable waste collectors With up to 3 inner containers

Attractive recyclable waste container made of brushed stainless steel with non-fingerprint finish. Ideal for use in the office and workshop.

1 1 inner container with a 24 l capacity. 2 2 inner containers with a 12 l capacity each. 3 2 inner containers with 12 l and 24 l capacities. 4 3 inner containers with a 12 l capacity each. 5 1 inner container with a 30 l capacity. 6 2 inner containers with a 15 l capacity each. 7 2 inner containers with 15 l and 30 l capacities. 8 3 inner containers with a 15 l capacity each.

No finger print

With inner bin

1 Model Capacity Height x width x depth Ref. RON Accessories Waste sacks Pack of

l mm

24 392 x 404 x 321 522 623-1E 340.00

2 x 12 392 x 404 x 321 522 625-1E 350.00

12 + 24 392 x 605 x 321 522 626-1E 465.00

3 x 12 392 x 605 x 321 522 630-1E 525.00

30 492 x 404 x 321 522 624-1E 390.00

2 x 15 492 x 404 x 321 522 628-1E 390.00

15 + 30 492 x 605 x 321 522 629-1E 575.00

3 x 15 492 x 605 x 321 522 631-1E 595.00

pcs. Ref. RON / pack

30 983 736-1E 845.00

2500 985 127-1E 545.00

30 983 736-1E 845.00

360 985 145-1E 235.00

30 983 736-1E 845.00

360 985 145-1E 235.00

30 983 736-1E 845.00

Stainless steel recyclable waste collectors Extra slim for optimal space utilisation No finger print

Model Capacity Height x width x depth Ref. RON Accessories Waste sacks Pack of

l mm

pcs. Ref. RON / pack

30 646 x 257 x 447 522 650-1E 490.00

45 661 x 277 x 531 522 651-1E 625.00

40 661 x 277 x 531 522 652-1E 645.00

2000 985 128-1E 1500.00

2500 985 127-1E 545.00

ENVIRONMENT

• Non-fingerprint finish • Lid with locking and soft close mechanism • Side handles for easy m ovement • Anti-slip coating for more stability • Plastic inner container with eyelet for fastening waste sacks, and carrying handle

With inner bin

Stainless steel waste collectors with sensor No contact opening and closing • • • • •

1 The waste collector made of brushed stainless steel can be opened without touching it by means of the sensor, or by using the function button. The lid automatically closes again slowly after approx. 5 seconds. Ideal for use in offices and workshops.

Non-fingerprint finish Sensor-controlled and manual operation Sensor mute switch (lid catch) Anti-slip base Battery operated

With battery operation for 6 AA batteries. Batteries are not included in the delivery.

26252

Model Capacity Height x width x depth Ref. RON Accessories Waste sacks Pack of 150 pcs.

No finger print

l mm

30 616 x 375 x 250 522 647-1E 575.00

45 647 x 270 x 460 522 648-1E 645.00

45 655 x 440 x 290 522 649-1E 645.00

Ref. RON / pack

741 118-1E 675.00

YELLOW = Ex stock

With inner bin

Telefon 0250 702 110 service@kaiserkraft.ro

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

473

Indoor waste collectors Open top stainless steel waste collectors Attractive large capacity designer waste collector with open slot.

With inner bin

Artikel Capacity Height x Ø Ref. RON Accessories Waste sacks Pack of

No finger print

RON Nr. 505 444-1E

545.00

l mm

50 597 x 370 522 612-1E 465.00

60 667 x 405 522 613-1E 675.00

90 686 x 405 522 614-1E 775.00

pcs. Ref. RON / pack

250 909 449-1E 400.00

400 505 460-1E 545.00

150 741 118-1E 675.00

Stainless steel waste collectors High quality waste collectors made of stainless steel with an extraordinary, functional design. Extremely robust and durable for daily, professional and heavy duty indoor use.

1 BULLET PUSH

4 SWING TOP round

Round waste collector with self-closing swing lid. • Convenient disposal – lid opens easily and closes automatically • Stainless steel container, swing lid made of high quality, black plastic • Waste sacks are securely clamped with the top (without inner container)

Waste collector with self-closing, stainless steel access flap. • Container and top made completely of stainless steel • Includes zinc plated inner container • Floor protection ring

2 OPEN TOP

3 SWING TOP oval

With inner bin

Oval shaped waste collector with selfclosing swing lid. • Convenient disposal – lid opens easily and closes automatically • Stainless steel container, swing lid made of high quality, black plastic • Including plastic inner container

With inner bin

474 www.kaiserkraft.ro

Large, elongated opening. Space saving design, can thus also be placed between other units. • Durable, robust container with no-fingerprint finish • Includes practical waste sack holder and floor protection ring

6 OPEN TOP semi-circular

Large opening. Semi-circular shape enables unit to be placed flush against wall. • Durable, robust container with no-fingerprint finish • Includes practical waste sack holder and floor protection ring

Model Capacity Height x width x depth Ref. RON Accessories Waste sacks Pack of

5 OPEN TOP oval

l mm

40 740 x 340 x 340 505 444-1E 545.00

60 760 x 400 x 400 505 445-1E 1050.00

40 680 x 400 x 400 505 446-1E 725.00

75 710 x 400 x 400 505 448-1E 775.00

50 695 x 272 x 463 727 772-1E 995.00

60 760 x 470 x 333 727 774-1E 1130.00

pcs. Ref. RON / pack

400 505 460-1E 545.00

250 909 449-1E 400.00

200 505 459-1E 275.00

250 928 015-1E 400.00

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

BLUE = Short delivery period

23117

Waste collector with large opening. • Convenient disposal – without flap, lid etc. • Container and top made completely of stainless steel • Floor protection ring • Waste sacks are securely clamped with the top (without inner container)

Indoor waste collectors 2

Plastic waste bin

1 3

Designer waste collectors Perfect for stylish, professional indoor areas • • • •

Inner container made of zinc plated steel

Plastic inner container

Model Capacity Height x Ø Fittings Ref. RON Accessories Waste sacks Pack of

Stylish and contemporary design Suitable for set up in representative rooms Durable and high quality construction Large opening

l mm

pcs. Ref. RON / pack

45 700 x 320 inner container 453 369-1E 875.00

45 700 x 320 – 453 370-1E 825.00

70 775 x 380 inner container 453 371-1E 1180.00

70 775 x 380 – 453 372-1E 1080.00

120 850 x 508 inner container 453 368-1E 1200.00

985 128-1E 1500.00

200 944 699-1E 390.00

200 754 938-1E 545.00

ENVIRONMENT

METALLIC waste collectors with pedal 20 and 40 litre capacity • Lid closes with almost no noise Plastic container with a metal look. No rust, no dents and no fingerprints on this one. A separate plastic ring guarantees that the garbage bag is not visible from outside. Rubber feet prevent the bin from sliding.

Other models

ONLINE!

Waste sack band

Carbon look

Capacity Height x width x depth carbon look red silver white

26253

Accessories Waste sacks Pack of

YELLOW = Ex stock

mm Ref. Ref. Ref. Ref. RON

457 x 293 x 266 118 288-1E 118 285-1E 118 284-1E 118 291-1E 205.00

676 x 353 x 295 118 289-1E 118 287-1E 118 286-1E 118 292-1E 275.00

pcs. Ref. RON / pack

250 909 448-1E 215.00

200 944 699-1E 390.00

No finger print

Telefon 0250 702 110 service@kaiserkraft.ro

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

475

Recyclable waste collectors METALLIC look recyclable waste collectors • • • • •

No finger print

Robust plastic container with metal look Easy to clean Including lid and waste sack holder Handle recesses on the underside for convenient transport and emptying Non-slip studs on underside of container

KOMPAKT waste collectors Different lid inserts for the separation of recyclable waste – Blue insert with slot for paper etc. – Green insert with deposit hole e.g. for cans – Grey lid with handle recess, ideal for refuse Model

Multiple collectors can be linked together to create a collection station using the supplied plastic connectors

2 1

l mm mm Ref. Ref. Ref. RON

55 290 x 490 700 521 295-1E 521 296-1E 521 297-1E 545.00

70 290 x 490 810 521 298-1E 521 300-1E 521 301-1E 625.00

Ref. RON / pack

521 222-1E 440.00

928 015-1E 400.00

Capacity Width x depth Height deposit slot / blue deposit hole / green lid with handle / grey Accessories Waste sacks Pack of 250 pcs.

CLASSIC waste collectors Durable, hardwearing containers – ideal for kitchens, food processing industries, etc.

2 1

1 Lid with deposit hole

2 Sliding lid

in two colours and sizes.

Slides open towards the top, and is closed again after use. Prevents odours from escaping.

Model

Design of access opening Colour of lid Height Capacity Width x depth 390 mm 50 l 60 l

sliding lid black 860

black 730

Ref. RON Ref. RON

521 303-1E 525.00 521 305-1E 575.00

521 304-1E 525.00 521 306-1E 575.00

727 724-1E 575.00

Ref. RON / pack

521 222-1E 440.00

390 x 390 mm

Accessories Waste sacks Pack of 250 pcs.

deposit hole blue 730

Recycling stations • Robust, durable containers • Three inner containers for efficient waste separation • Floor protection ring Three galvanised and separately removable metal inner containers

Model Capacity Height x Ø sheet steel, powder coated

signal black RAL 9004

stainless steel

1 476 www.kaiserkraft.ro

Accessories PE waste sacks Pack of 250 pcs.

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

l mm Ref. RON Ref. RON

40 470 x 355 111 393-1E 645.00 111 395-1E 875.00

60 670 x 355 111 394-1E 875.00 111 396-1E 895.00

Ref. RON / pack

928 015-1E 400.00

BLUE = Short delivery period

26254

Sheet steel body, black powder coated or stainless steel. Set of stickers for labelling included with delivery. Housing made of stainless steel or sheet steel, powder coated in black.

With inner bin

Recyclable waste collectors Recycling bins • Eyelets to affix a padlock • Lid closes quietly • Robust plastic – easy to clean

Made of black polypropylene for industrial use. Different coloured lids for easy separation of recyclables. Two wheels with rubber tyres.

Capacity Height x width x depth Order quantity Colour of lid red black blue green beige Accessories Waste sacks Pack of 100 pcs.

For outdoor

100

920 x 440 x 590 1 – 4 items

5+ items

Ref. Ref. Ref. Ref. Ref. RON / each

118 309-1E 521 309-1E 521 311-1E 521 312-1E 521 313-1E 390.00

118 310-1E 111 299-1E 111 300-1E 111 301-1E 111 302-1E 350.00

Ref. RON / pack

511 919-1E 825.00

Suitable padlocks can be found on page 516.

Pedal waste collectors • Non-slip base • Lid catch • Hands-free operation – ideal for industry, foodstuffs processing, industrial kitchens etc.

ENVIRONMENT

With robust, wide pedal. Lid catch makes removal of waste sack easy. Overlapping, slowly closing lid prevents odours from escaping. For outdoor

Model

l mm Ref. Ref. Ref. RON

35 440 x 390 x 390 944 642-1E 944 640-1E 944 641-1E 525.00

60 690 x 390 x 390 944 646-1E 944 643-1E 944 644-1E 625.00

85 790 x 490 x 390 944 649-1E 944 647-1E 944 648-1E 745.00

Ref. RON / pack

614 435-1E 425.00

521 222-1E 440.00

Capacity Height x width x depth white black beige Accessories Waste sacks Pack of 250 pcs.

Multi-purpose containers Accessories

• Includes lid in matching colour • Rubberised handles for a secure hold • Nestable without lid, stackable with lid Made of extremely durable polyethylene. For use in industry and foodstuffs processing. The colours white and yellow containers are suitable for foodstuffs.

Model Capacity Diameter Height x width x depth black white yellow green

23611

Accessories Waste sacks Pack of

Dolly

Dolly Adjustable size. 4 swivel castors, one with wheel stop. Rubber bumper strips. Max. load 100 kg. Height 220 x Ø 470 mm. Supplied flat pack – easy self-assembly.

l mm mm Ref. Ref. Ref. Ref. RON

85 500 660 x 570 x 370 944 650-1E 944 651-1E 944 652-1E 944 654-1E 400.00

120 570 750 x 650 x 435 944 655-1E 944 656-1E 944 657-1E 944 658-1E 500.00

pcs. Ref. RON / pack Ref. RON

150 741 118-1E 675.00 111 206-1E 390.00

111 206-1E 390.00

YELLOW = Ex stock

For outdoor

With PE waste sacks and dolly (accessories)

Telefon 0250 702 110 service@kaiserkraft.ro

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

477

Recyclable waste collectors Plastic waste collectors with pedal Made of extremely durable polypropylene • Hands-free operation: Robust, wide foot pedal – ideal for foodstuffs processing, industrial kitchens etc. • Overlapping lid • Set of pictograms for recyclable materials

For outdoor

4 Metal bar on base for more stability and two plastic castors for easy transport.

4 Model

3 1

from RON

l mm

30 435 x 410 x 400

45 600 x 410 x 400

70 675 x 505 x 415

90 790 x 505 x 410

Ref. Ref. Ref. Ref. Ref. Ref. RON

614 414-1E 614 415-1E 614 417-1E 614 418-1E 614 419-1E 614 420-1E 475.00

614 421-1E 614 422-1E 614 423-1E 614 425-1E 614 426-1E 614 427-1E 625.00

614 428-1E 614 429-1E 614 430-1E 614 431-1E 614 433-1E 614 434-1E 745.00

521 251-1E 614 436-1E 614 437-1E 614 438-1E 614 439-1E 614 441-1E 1100.00

pcs. Ref. RON / pack

250 614 435-1E 425.00

250 521 222-1E 440.00

250 703 929-1E 525.00

200 754 938-1E 545.00

Capacity Height x width x depth Body / lid white / white grey / grey grey / yellow grey / red grey / blue grey / green Accessories Waste sacks Pack of

475.00

Plastic recyclable waste collectors 60 and 80 litre containers for easy separation, collection and disposal

For outdoor

• • • •

Made of robust polypropylene Handles for easy handling Removable lid assembly Can be used individually or as a collection station

1 Container without lid Containers with lid

2 Grey / black lid with deposit slot 3 Grey / black lid with self-closing access flap 4 Yellow lid with round deposit hole 5 Blue lid with deposit slot and pictograms for recyclable materials

Dolly (accessory), easy to assemble

6 Green lid with round opening and

pictograms for recyclable materials

7 Yellow lid with square opening and pictograms for recyclable materials

8 Grey lid, closed, with pictograms for

recyclable materials

Dolly made of plastic

7 1

Model Capacity 60 l Height Width x depth

80 l

Height Width x depth

478 www.kaiserkraft.ro

mm mm Ref. RON mm mm Ref. RON

Ref. 453 095-1E RON 275.00

580 460 x 320 606 864-1E 235.00 762 460 x 320 727 658-1E 315.00

800 340 x 470 605 462-1E 350.00 985 340 x 470 727 669-1E 525.00

800 340 x 470 605 463-1E 350.00 985 340 x 470 727 672-1E 525.00

800 340 x 470 605 464-1E 350.00 985 340 x 470 727 675-1E 525.00

645 340 x 470 727 678-1E 415.00 830 340 x 470 727 661-1E 525.00

645 340 x 470 727 682-1E 415.00 830 340 x 470 727 663-1E 525.00

645 340 x 470 727 714-1E 415.00 830 340 x 470 727 665-1E 525.00

645 340 x 470 727 715-1E 415.00 830 340 x 470 727 667-1E 525.00

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

Dolly Sturdy steel construction with 4 swivel castors, 2 with wheel stops. Can be easily coupled together with the supplied connecting bolts. Mobile recycling stations can be configured to individual requirements. Ref. 727 716-1E

RON 575.00

PE waste sacks Made of polyethylene. Suitable for all recyclable waste collectors. Pack of 250. Ref. 928 015-1E

RON / pack 400.00

BLUE = Short delivery period

26255

With 4 swivel castors. One mobile recycling station can be individually configured. Can be easily coupled together with the supplied connecting bolts. Mobile recycling stations can be configured to individual requirements.

Recyclable waste collectors Industrial pedal bins Robust and durable for industrial use • • • • •

Selfextinguishing

Easy to operate, wide pedal Integrated waste sack holder Lid with gas spring closing mechanism Odourless and fire retardant Handle on collector for easy transport

Ideally suited for use in production, workshops, kitchens etc. Easy to clean with non-corrosive media. Housing and lid made of white powder coated sheet steel or stainless steel.

Height x width x depth sheet steel, powder coated stainless steel Accessories Waste sacks Pack of

152

440 x 380 x 365

595 x 380 x 365

770 x 445 x 435

770 x 540 x 540

Ref. RON Ref. RON

521 209-1E 595.00 521 208-1E 995.00

521 211-1E 875.00 521 210-1E 1150.00

521 214-1E 1200.00 521 212-1E 1800.00

521 216-1E 1500.00 521 215-1E 2350.00

pcs. Ref. RON / pack

250 508 861-1E 315.00

360 985 144-1E 365.00

250 928 015-1E 400.00

200 754 938-1E 545.00

Video

ONLINE!

from RON

595.00 ENVIRONMENT

Capacity

Industrial pedal bins Extremely robust and durable for industrial use • • • • •

Made of high quality, heavy duty polypropylene Slim design – space saving usage Lid closes quietly using soft reclosing mechanism Hinged on the inside to reduce wall damage Hands-free operation – ideal for industry, foodstuffs processing, industrial kitchens etc.

Capacity Width x depth Height beige black

23607

Accessories Waste sacks Pack of

YELLOW = Ex stock

Telefon 0250 702 110 service@kaiserkraft.ro

mm mm Ref. Ref. RON

320 x 497 577 124 231-1E 124 280-1E 875.00

343 x 528 720 124 233-1E 124 283-1E 1050.00

373 x 562 781 124 235-1E 124 285-1E 1400.00

403 x 637 813 124 237-1E 124 287-1E 1600.00

pcs. Ref. RON / pack

250 722 546-1E 390.00

150 741 118-1E 675.00

150 695 807-1E 725.00

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

479

Recyclable waste collectors Recyclable waste collectors

2+6 2

• Can be used individually, or extended to form a recyclable waste sorting system • Made of extremely durable polyethylene • Stationary or mobile with dolly (available as an accessory)

1+7

Dollies For transporting full collectors. Made of plastic or sheet steel. The plastic dollies allow as many collectors as required to be linked together and unlinked again.

1+4 With new, innovative air channels for easier removal of sacks and ingenious waste sack holding mechanism.

1+5 Plastic lids for all container sizes

4 With deposit slot

5 With deposit holes

For paper, cardboard, etc. Slot length x width approx. 420 x 50 mm. Blue.

For cans, bottles, batteries etc. Hole Ø approx. 140 mm. Colour Ref. RON

Ref. 714 803-1E RON 220.00

6 With swing lid

Capacity Container colour Height Width x depth

Accessories PE waste sacks Pack of 250 pcs. Sheet steel dolly

With practical recessed handle. Colour Ref. RON

Ref. 516 990-1E RON 190.00

RON Nr. 516 542-1E

green 714 807-1E 230.00

7 Closed

Opening approx. 420 x 200 mm. Grey.

Model

grey 714 808-1E 230.00

Plastic dolly

1 l

mm mm Ref. RON

60 grey blue 635 635 279 x 558 279 x 558 475 647-1E 475 648-1E 325.00 325.00

grey 762 279 x 558 521 261-1E 595.00

blue 762 279 x 558 521 262-1E 595.00

Ref. RON Ref. RON Ref. RON

928 015-1E 400.00 521 263-1E 795.00 475 649-1E 525.00

Recyclable waste containers

995.00

For indoor and outdoor use • Sturdy holder for 120 l waste sacks • Easy cleaning of the container – even inside – by opening the front door • Stability due to large footprint • Supplied with connection clips to form banks The large volume recyclable waste containers with clever waste sack holder and flexible access opening. Container, flap and front door made of impact resistant, durable plastic (ABS). Height x width x depth 1120 x 500 x 450 mm.

Recyclable waste collectors are labelled using the enclosed stickers. The model with an insert requires additional labelling to indicate the colour and shape of the insert (attachment using Velcro).

Accessories Wheel set Two wheels and a handle. Easy to install on the container. Ref. 516 543-1E RON 325.00

Lid type / colour access flap / grey deposit hole and deposit slot / assorted colours

480 www.kaiserkraft.ro

Deposit hole: patina green or traffic yellow

For outdoor

Ref.

RON

516 542-1E 538 320-1E

995.00 1480.00

Deposit slot: distant blue

NEW

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

26402

Extra large access flap

BLUE = Short delivery period

Recyclable waste collectors 1

2 3 For outdoor

Round universal containers Extremely robust containers – as a waste collector, for storage and transport

Accessories

• M ade of tough, shatterproof plastic (PE), seamlessly moulded • Impact and shock resistant • Temperature resistant from –29 °C to +68 °C • Easy to stack • Large handles • Easier removal of the waste sack through air channels on the 75, 121 and 166 l model

Lids Made of PE, with snap lock to prevent smells. Can be safely stacked.

Accessories Lid

Waste sacks

grey white yellow red black Pack of

Dolly

23119

Wheeled base Tandem dolly

YELLOW = Ex stock

l mm mm Ref. Ref. Ref. Ref. Ref. RON

37 400 435 703 827-1E 703 828-1E

75 495 580 703 829-1E 703 830-1E 917 497-1E 703 831-1E

166 610 800 703 836-1E 703 837-1E

208 673 838 703 840-1E

225.00

440.00

121 560 690 561 800-1E 703 832-1E 754 931-1E 703 833-1E 703 835-1E 595.00

Ref. Ref. Ref. Ref. Ref. RON pcs. Ref. RON Ref. RON Ref. RON Ref. RON

703 841-1E 703 843-1E

703 844-1E 703 845-1E 703 846-1E

561 878-1E 703 847-1E 703 848-1E 703 849-1E

87.00 250 909 448-1E 215.00

97.00 250 521 222-1E 440.00 562 300-1E 625.00 909 638-1E 795.00 909 639-1E 1250.00

145.00 200 754 938-1E 545.00 562 300-1E 625.00 909 638-1E 795.00 909 639-1E 1250.00

909 638-1E 795.00

Wheeled base Made of PE/metal. For easy positioning of containers. 5 swivel castors. Ø x height 619 x 181 mm.

703 838-1E 703 839-1E 845.00

1150.00 703 855-1E

607 014-1E 205.00 200 754 938-1E 545.00 562 300-1E 625.00 909 638-1E 795.00 909 639-1E 1250.00

181 mm

Capacity Diameter at top Height grey white blue yellow red

Tandem dolly Made of PE/metal. 2 containers (in same or different size) can be securely bolted down. Folds up to save space. 4 swivel castors, 2 large fixed castors. L x W x H 1143 x 514 x 203 mm.

300.00 100 985 156-1E 1100.00 562 300-1E 625.00 909 638-1E 795.00 909 639-1E 1250.00

Telefon 0250 702 110 service@kaiserkraft.ro

68 mm 168 mm

Model

Waste sacks Made of polyethylene.

86 mm

High stability due to reinforced edges and double ribbed base. Large handles make secure lifting possible even with gloves. Problem free stacking, without handles jamming. Containers in yellow, white and grey are suitable for foodstuffs.

ENVIRONMENT

With wheeled base (accessory)

Dolly Made of PE/metal. Bayonet closure makes it easy to securely and tightly bolt-down containers. 5 swivel castors. Ø x height 464 x 168 mm.

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

481

Recyclable waste collectors Square universal containers • Made of seamless, impact resistant PE – retains its shape • Temperature resistant from –20 °C to +68 °C • Large handles, rounded edges • Double ribbed bases for high stability and tensile strength

For outdoor

Accessories Lid Made of PE. With snap lock. Dolly Made of PE/metal. Bayonet closure makes it easy to securely and tightly bolt down containers. 4 swivel castors. L x W x H 438 x 438 x 159 mm. Tandem dolly Made of PE/metal. 2 containers (in same or different size) can be securely bolted down. Folds up to save space. 4 swivel castors, 2 large fixed castors. L x W x H 1143 x 514 x 203 mm. PE waste sacks, blue Pack of 100.

Model Capacity Length x width x height grey red white

Accessories Lid

Dolly Tandem dolly Waste sacks

grey white – – blue

l mm Ref. Ref. Ref. RON

105 550 x 550 x 580 561 827-1E 917 498-1E 703 856-1E 490.00

151 590 x 590 x 730 561 843-1E

Ref. Ref. RON Ref. RON Ref. RON Ref. RON

561 894-1E 703 858-1E 150.00 562 386-1E 575.00 909 639-1E 1250.00 511 919-1E 825.00

561 916-1E 917 501-1E 210.00 562 386-1E 575.00 909 639-1E 1250.00 511 919-1E 825.00

Recyclable waste containers • Made of very sturdy plastic • Highly versatile – for indoor and outdoor use • Easy to clean due to rounded corners and smooth surfaces • Opening at an ergonomic height

Accessories Swing lid, PE, quiet. Suitable waste sacks, grey

Model Capacity Height x width x depth blue grey

Accessories Swing lid Length x width x height

1 PE waste sacks Pack of

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

l mm Ref. Ref. RON

87 785 x 394 x 420 516 989-1E 425.00

132 702 x 495 x 495 917 506-1E 917 504-1E 745.00

mm Ref. RON

406 x 406 x 101 607 650-1E 210.00

511 x 511 x 159 917 507-1E 450.00

pcs. Ref. RON / pack

250 928 015-1E 400.00

200 754 938-1E 545.00

BLUE = Short delivery period

23120

482 www.kaiserkraft.ro

917 499-1E 725.00

Recyclable waste collectors Modular recyclable waste collector systems Available in two sizes • • • •

Robust plastic frame (ABS) Can be expanded as required Lid opens wide Removable inner container

Use standard module and as many extension modules as required to create custom recycling stations. Sizes cannot be combined. Each supplied with four coloured stickers to label lid (yellow, grey, green, blue). Easy plug-in assembly.

3 part station comprised of a standard module and two extension modules

Standard module

Capacity

3 x 38 With inner bin

Extension

Standard module

Extension module

3-module station

450 x 310 395 491 008-1E 300.00

450 x 310 395 491 009-1E 235.00

560 x 355 395 111 297-1E 400.00

560 x 310 395 111 298-1E 365.00

560 x 1065 395 111 303-1E 995.00

mm mm

1 40 litres 1

60 litres

Waste sacks Pack of 250. Ref. 521 222-1E

RON / pack 440.00

Separation and collection containers for recyclables Container capacity of 40 or 60 litres • Robust, impact resistant plastic container • Coloured lid for the easy separation of recyclables • Clamping rings make it easy to secure waste sack (inner container as an accessory) • With pictogram sticker set, two of each sticker • For easy, separate collection of waste Body in light grey, similar to RAL 7035. Supplied flat pack – easy self-assembly.

Accessories Inner container made of zinc plated sheet steel. Waste sacks Made of transparent polyethylene. Pack of 250.

1 Capacity

3 x 60 litres

Height x width Depth yellow, similar to RAL 1003 blue, similar to RAL 5002 light grey, similar to RAL 7035 green, similar to RAL 6001 Accessories Inner container, zinc plated

mm mm Ref. Ref. Ref. Ref. RON

570 x 250 607 031-1E 607 032-1E 607 033-1E 607 034-1E 465.00

570 x 360 405 607 035-1E 607 036-1E 607 038-1E 607 039-1E 475.00

607 044-1E 375.00 508 861-1E 315.00

607 046-1E 440.00 722 546-1E 390.00

Ref. RON Ref. RON / pack

Waste sacks Pack of 250 pcs.

ENVIRONMENT

Height x width Depth Ref. RON

Standard module

2 3 compartment or 4 compartment 40 litre collection station

Lid colours yellow, blue, grey Capacity Height x width Depth Ref. RON

3 x 40

4 x 40

mm mm

570 x 760 405 607 040-1E 875.00

570 x 1010 405 607 042-1E 1080.00

3 3 compartment or 4 compartment 60 litre collection station

Lid colours yellow, blue, grey, green Capacity

With inner container and waste sacks (accessories)

4 x 40 litres

23614

3 YELLOW = Ex stock

Telefon 0250 702 110 service@kaiserkraft.ro

Height x width Depth Ref. RON

3 x 60

4 x 60

mm mm

570 x 1060 405 607 041-1E 1100.00

570 x 1410 405 607 043-1E 1330.00

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

483

Waste sack stands With waste sacks (accessories)

These hygienic waste collectors meet the requirements of the medical and food p rocessing industries such as kitchens, doctor's practices etc. Also suitable for wet areas. With remote switch

Mobile plastic waste sack holders with pedal For 120 litre waste sacks • P edal for hygienic opening of lid – without hands • Mobile – with two or four castors • Practical push handle

Supplied flat pack – easy plug-in assembly.

1 With two fixed castors and two support feet 2 With two fixed castors

Frame and lid made of robust plastic, lifting strut made of aluminium. Waste sack holder frame and push handle made of GRP.

and two swivel castors

Model

Accessories Waste sacks, blue Pack of 250 pcs.

mm mm Ref. Ref. RON

990 640 x 500 484 036-1E 484 037-1E 745.00

990 640 x 500 484 033-1E 484 034-1E 745.00

Ref. RON / pack

703 929-1E 525.00

Height Width x depth blue white

Waste sack collectors For 120 litre sacks Robust steel frame with base plate, electrolytically zinc plated. Sack secured via self-tensioning bar.

1 Stationary 2 Mobile

With 4 swivel castors, 2 with wheel stops.

Model

Height x width x depth Ref. RON Accessories Plastic sacks Pack of 250 pcs.

940 x 370 x 330 505 520-1E 525.00

985 x 370 x 330 505 521-1E 545.00

Ref. RON / pack

509 078-1E 475.00

Mobile metal waste sack holders with pedal With remote switch

• H ands-free operation • Ideal for areas with high hygienic requirements

1 With tubular steel frame

2 Made of stainless steel

Frame and sheet steel lid powder coated in light grey RAL 7035. Lid Ø 410 mm. Clamping ring for securing sack. Mobile on 2 large wheels.

Lid Ø 410 mm. Stainless steel clamping ring for securing sack. Mobile and stable on 5 castors. Supplied flat pack – easy self-assembly.

Model

484 www.kaiserkraft.ro

l mm

120 990 x 550 x 630 505 522-1E 1100.00

120 900 x 410 x 600 505 523-1E 1850.00

Ref. RON / pack

928 015-1E 400.00

2 Ideal for medical and food processing industries.

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

BLUE = Short delivery period

23122

For sack capacity Height x width x depth Ref. RON Accessories PE waste sacks Pack of 250 pcs.

Waste sack stands

Recyclable waste collector sets Recyclable waste sack holder incl. 250 blue recycling sacks • Light, robust and durable aluminium/ plastic construction • Can be expanded and combined at will with the clip system • Integrated frame with elastic strap to easily secure the recycling sacks • Stationary or mobile

For sack capacity Height Width x depth stationary mobile

Tubular aluminium frame. Folding lid, lid frame and base plate made of plastic. Colour coded self-adhesive films to label lids. Supplied flat pack – easy plug-in a ssembly.

1 x 120

2 x 120

3 x 120

mm mm Ref. RON Ref. RON

1000 430 x 450 505 373-1E 625.00 505 380-1E 645.00

1000 880 x 450 505 376-1E 825.00 505 377-1E 925.00

1000 1330 x 450 505 378-1E 1130.00 505 379-1E 1500.00

Made of polyethylene, in four colours. Pack of 250. Colour Ref. RON / pack

blue

black

yellow

transparent

558 966-1E 475.00

509 078-1E 475.00

754 971-1E 475.00

509 086-1E 475.00

Mobile version

Plastic waste collectors with pedals For 120 litre waste sacks

ENVIRONMENT

Waste sacks

With remote switch

• Two wide opening doors for quick changing of waste sacks and cleaning • Large pedal for convenient operation • Lid closes softly and quietly Frame and lid made of extremely robust plastic (PP). Including waste sack holder.

For sack capacity

23123

Height x width x depth signal white, similar to RAL 9003 red, similar to RAL 3000 Accessories Waste sacks, grey Pack of 200 pcs.

YELLOW = Ex stock

1 x 120

mm Ref. Ref. RON

940 x 540 x 410 941 017-1E 941 019-1E 1800.00

Ref. RON / pack

754 938-1E 545.00

Telefon 0250 702 110 service@kaiserkraft.ro

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

485

Waste sack stands 3

7 5

2 1

Some units feature a lid, pedal assembly and waste sack (accessories)

High quality recyclable waste collectors Can be used virtually anywhere: in the office, canteen, catering, kitchen, clinic, surgery, production, warehouse, or any other publicly used area... • Extremely sturdy, welded, impact resistant tubular steel frame • Self-tensioning bar with non-slip rubber to hold the waste sacks securely, hygienic base construction • Mobile frames with four black double swivel castors with integrated thread protection

For 70 litre sacks

Accessories

1 Static frame 1 x 70 litre 2 Mobile frame 1 x 70 litre 3 Mobile frame 2 x 70 litre 4 Mobile frame 3 x 70 litre 5 Mobile frame 4 x 70 litre

Lid Made of white plastic similar to RAL 9003. Pedal assembly Pedal for opening lid, stainless steel, one pedal assembly per lid. Can be retrofitted, easy to assemble (for use with mobile frames only). Waste sacks Made of blue polyethylene. Pack of 250.

For 120 litre sacks 6 Static frame 1 x 120 litre 7 Mobile frame 1 x 120 litre Model For sack capacity Height Width x depth powder coated stainless steel Accessories Lid Pedal assembly Waste sacks Pack of 250 pcs.

486 www.kaiserkraft.ro

l mm mm Ref. RON Ref. RON

1 x 70 764 360 x 360 714 357-1E 745.00 714 358-1E 1180.00

1 x 70 820 360 x 360 714 361-1E 875.00 714 362-1E 1180.00

2 x 70 820 740 x 360 714 366-1E 1100.00 714 367-1E 1800.00

3 x 70 830 1120 x 360 714 368-1E 1430.00 714 369-1E 2600.00

4 x 70 830 800 x 740 714 370-1E 2200.00 714 371-1E 3200.00

1 x 120 764 450 x 360 714 359-1E 875.00 714 360-1E 1500.00

1 x 120 834 450 x 360 714 363-1E 975.00 714 365-1E 1550.00

Ref. RON / each Ref. RON / each Ref. RON / pack

232 491-1E 225.00

232 491-1E 225.00 913 336-1E 625.00 232 270-1E 425.00

232 459-1E 245.00

232 459-1E 245.00 913 336-1E 625.00 558 966-1E 475.00

232 270-1E 425.00

558 966-1E 475.00

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

Set of stickers With six coloured symbols for biodegradable waste, glass, paper, refuse, plastic and metal. Height x width 180 x 160 mm.

Ref. 913 337-1E RON 120.00

Additional waste sacks can be found on pages 502 and 503. BLUE = Short delivery period

23615

Particularly well designed, well made, attractive and d urable waste collectors. Meets demanding requirements.

Waste sack stands Recyclable waste collectors

7 6

For 70 and 120 litre sacks • Galvanised tubular steel frame • Clamping ring to secure sack • Flanged plastic lids in different colours for separating recyclable waste

1 Static frame

For 1 sack, black lid.

2 Static frame

For 2 sacks, black and yellow lid.

3 Static frame

For 3 sacks, blue, yellow and black lid.

4 Frame with three legs

For 1 sack, black lid.

5 Frame with three legs

For 1 sack – ideal for yellow recyclable waste sacks, yellow lid.

6 Mobile frame

For 1 sack, black lid.

7 Mobile frame For 2 sacks, black and yellow lid.

ENVIRONMENT

1 Model For sack capacity Height x width x depth Ref. RON

l mm

1 x 70 770 x 365 x 380 176 491-1E 300.00

2 x 70 / 120 770 x 755 x 380 176 489-1E 390.00

3 x 70 / 120 770 x 955 x 380 176 490-1E 365.00

1 x 70 / 120 935 x 575 x 575 176 485-1E 365.00

1 x 70 / 120 935 x 575 x 575 176 492-1E 365.00

1 x 70 / 120 890 x 350 x 350 176 487-1E 425.00

2 x 70 / 120 975 x 750 x 500 176 488-1E 795.00

Waste sacks

Lid labels

Material

23124

Colour Pack of 70 l 120 l

LDPE

pcs. Ref. RON / pack Ref. RON / pack

blue 250 408 883-1E 475.00 558 966-1E 475.00

YELLOW = Ex stock

yellow 250 508 896-1E 475.00 754 971-1E 475.00

paper black 250 508 934-1E 475.00 509 078-1E 475.00

transparent 250 508 942-1E 475.00 509 086-1E 475.00

brown 100 408 921-1E 775.00 408 930-1E 925.00

Seven stickers to aid in the separation of recyclable waste.

Ref. 696 013-1E RON 92.00

Telefon 0250 702 110 service@kaiserkraft.ro

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

487

Waste sack stands Waste sack holders and stands For 120 litre sacks • R obust, durable steel construction • Clamping ring for securing sacks. Internal Ø 340 mm/external Ø 380 mm Supplied flat pack – easy self-assembly.

1 Static frame 2 Static frame with pedal

4 3-leg static frame 5 3-leg mobile frame

The convenient waste sack holder.

3 Wall holder

With 4 swivel castors.

6 2-wheel mobile frame 7 4-wheel mobile frame 8 4-wheel mobile frame

Lids Made of plastic or sheet steel, Ø 360 mm. Plastic lid always in black. Steel lid Green for powder coated frames, zinc plated for zinc plated frames.

Waste sack stands for kitchens and wet areas can be found on page 485.

with base plate

2 3

23127

Height Width x depth Frame colour Material of lid plastic sheet steel

488 www.kaiserkraft.ro

1 mm mm

Ref. RON Ref. RON

950 540 x 470 green

950 540 x 470 zinc plated

950 540 x 470 green

950 540 x 470 zinc plated

100 390 x 510 green

100 390 x 510 zinc plated

232 688-1E 400.00 713 493-1E 440.00

562 378-1E 400.00 713 494-1E 725.00

722 544-1E 575.00 754 945-1E 675.00

754 946-1E 575.00 754 947-1E 675.00

232 610-1E 375.00 713 491-1E 525.00

562 351-1E 440.00 713 492-1E 475.00

Plastic sacks Material Colour Pack of Ref. RON / pack

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

LDPE

pcs.

blue 250 558 966-1E 475.00

paper black 250 509 078-1E 475.00

BLUE = Short delivery period

brown 100 408 930-1E 925.00

23127

Model

Waste sack stands

RON Nr. 941 005-1E

595.00

ENVIRONMENT

Model

23128

Height Width x depth Frame colour Material of lid plastic sheet steel

mm mm

Ref. RON Ref. RON

980 580 x 580 zinc plated

1010 580 x 580 zinc plated

950 540 x 470 green

950 540 x 470 zinc plated

950 540 x 470 green

950 540 x 470 zinc plated

950 450 x 560 green

950 450 x 560 zinc plated

941 006-1E 795.00

232 645-1E 725.00 713 495-1E 595.00

611 891-1E 595.00 713 496-1E 975.00

232 726-1E 845.00 714 338-1E 895.00

562 394-1E 845.00 714 339-1E 875.00

118 314-1E 745.00 118 312-1E 795.00

118 315-1E 745.00 118 313-1E 775.00

941 005-1E 595.00

YELLOW = Ex stock

Telefon 0250 702 110 service@kaiserkraft.ro

120 litre waste sacks in additional colours Material Colour Pack of Ref. RON / pack

LDPE yellow 250 754 971-1E 475.00

transparent 250 509 086-1E 475.00

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

489

Waste sack stands MAXI recyclable waste collectors Capacity 140 litres – can be used individually or as a collection station • • • • •

For outdoor

Large container capacity Made of very robust plastic (MDPE) Wide opening door for easy emptying Integrated waste sack holder For efficient collection and separation of recyclable waste

Height x width x depth 1220 x 550 x 615 mm. Doors can be fully opened for replacing the waste sack. Can be ballasted or anchored to floor.

Accessories Waste sacks Green, polyethylene (PE-LD). Pack of 200.

Ref. 985 150-1E

2 Model

3 4

RON / pack 925.00

Design of access opening

deposit hole

deposit slot

deposit hole

deposit channel

Colour of lid Ref. RON

grey 111 354-1E 4400.00

blue 111 353-1E 4400.00

red 111 355-1E 4400.00

green 111 356-1E 4400.00

Large capacity recyclable waste collectors

1050.00

RON Nr. 722 587-1E

Ideal for bulky, lightweight recyclable material such as film, foam etc. Mobile and wall mounted collectors

★ 10 year guarantee

Flexible and highly versatile • Stable tubular steel construction • Base made of zinc plated sheet steel • Opening diameter and height are adjustable

★ Top quality

Waste sacks are tensioned and held by the adjustable depth holding frame. Easy self-assembly.

★ 5 year re-order service ★ From selected suppliers

1 Single collector 200 – 300 litres

★ Custom made products

Height up to 1.70 m. For sack circumference 2.30 – 2.80 m.

2 Single collector up to 500 litres (not shown)

Height up to 2.30 m. For sack circumference 2.50 – 2.90 m.

3 Single collector up to 1000 litres (not shown)

Height up to 2.30 m. For sack circumference 2.50 – 3.00 m. Mobile and wall mounted versions available.

4 Single collector up to 2500 litres

Model For sack capacity Height x width x depth free standing wall mounting

23130

Accessories Waste sacks Pack of

490 www.kaiserkraft.ro

l mm Ref. RON Ref. RON

1 x 300 1750 x 750 x 750 722 587-1E 1050.00

1 x 500 1750 x 850 x 770 722 590-1E 1180.00

1000 2350 x 850 x 770 722 591-1E 1250.00 722 602-1E 625.00

2500 2350 x 1210 x 1020 722 592-1E 1280.00 722 603-1E 490.00

pcs. Ref. RON / pack

100 722 604-1E 975.00

100 722 605-1E 1250.00

80 722 606-1E 1300.00

40 603 391-1E 895.00

Height up to 2.30 m. For sack circumference 3.40 – 4.50 m. Mobile and wall mounted versions available.

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

For wall mounting

BLUE = Short delivery period

23130

Waste sack stands Large capacity recyclable waste collectors For the efficient collection of bulky, lighter recyclable material directly at the workstation. E rgonomically shaped opening for easy access Quick and easy changing of waste sacks Stationary or mobile Three sizes, two versions Very stable due to reinforced struts

Light, robust and durable tubular steel construction, powder coating in light blue RAL 5012. Supplied fully assembled. Mobile version With two sturdy nylon wheels, Ø 125 mm. Base plate, zinc plated Can be retrofitted to the frame. Height adjustable.

Model

Capacity Height x depth Width stationary

★ 10 year guarantee

mobile

★ Top quality

Accessories Waste sacks Pack of

★ 5 year re-order service ★ From selected suppliers ★ Custom made products

Available in almost any RAL colour. Extra cost of only 10%.

Base plate

l mm mm Ref. RON Ref. RON

200 970 x 460 460 115 675-1E 645.00

2 200 970 x 535 580

400 1325 x 520 520 115 677-1E 795.00

115 676-1E 745.00

pcs. Ref. RON / pack Ref. RON / pack

3 400 1325 x 540 635

1000 1615 x 645 645 115 679-1E 1200.00

115 678-1E 895.00

100 614 341-1E 675.00 532 065-1E 325.00

1000 1615 x 720 760

115 680-1E 1330.00

80 722 606-1E 1300.00 532 066-1E 390.00

Base plate

ENVIRONMENT

• • • • •

Stationary or mobile Extremely robust, durable and stable. • Welded, powder coated, rectangular tubular steel construction • For sack circumferences of 2900 mm and larger Steel construction, powder coated grey RAL 7035. 4 steel clamps secured with chains for fastening waste sacks. Model with castors Mobile frame with 4 solid rubber swivel castors, Ø 75 mm, 2 castors with double stops. Easy self-assembly.

Model For sack capacity Width x depth Height stationary

mobile

26403

Accessories Waste sacks Pack of

Height

l mm mm Ref. RON mm Ref. RON

1000 730 x 700 1260 603 386-1E 1100.00 1364 603 387-1E 1230.00

2500 1200 x 770 1390 603 388-1E 1230.00 1490 603 389-1E 1350.00

pcs. Ref. RON / pack

100 603 390-1E 775.00

40 603 391-1E 895.00

YELLOW = Ex stock

6 5

Telefon 0250 702 110 service@kaiserkraft.ro

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

491

Bulk waste containers

System waste bins

Model

Large and small waste bins to be emptied in compliance with DIN 6628/6629

polyethylene

sheet steel

l mm kg Ref. RON / each Ref. RON / each

35 535 x 455 2.7 233 080-1E 350.00 761 474-1E 325.00

50 730 x 455 3.4 233 072-1E 375.00 761 476-1E 350.00

35 450 x 330 6.7 232 912-1E 645.00 761 481-1E 595.00

50 670 x 330 8.6 232 920-1E 645.00 761 483-1E 625.00

110 930 x 435 16.3 232 955-1E 1400.00 761 485-1E 1300.00

pcs. Ref. RON / pack

250 722 546-1E 390.00

250 928 015-1E 400.00

250 722 546-1E 390.00

250 408 883-1E 475.00

250 558 966-1E 475.00

Waste collector material For outdoor

Robust, durable, highly resistant container made of charcoal coloured high density polyethylene with a reinforced base.

Capacity Height x Ø Weight 1 – 4 items 5+ items Accessories Waste sacks Pack of

5 Anti-bacterial

For outdoor

Plastic and sheet steel bins

1 – 4 Made of natural white

5+ items

23125

Accessories Lids

1 – 4 items 5+ items

492 www.kaiserkraft.ro

• Heat resistant up to 130 °C

• Stackable (with lid – see accessories) • Suitable for foodstuffs • Temperature resistant from –30 °C to +70 °C • Two practical handles

5 – 7 Sheet steel bins, heavy duty version with reinforced base, without lid. 8 + 9 Cylindrical rubbish bin, reinforced base, with hinged lid.

polyethylene

sheet steel, hotdip galvanised

l mm kg Ref. RON / each Ref. RON / each

40 455 x 420 2 144 355-1E 180.00 761 488-1E 165.00

50 555 x 420 2.5 233 056-1E 210.00 761 497-1E 190.00

75 535 x 515 3.6 232 998-1E 250.00 761 505-1E 230.00

110 730 x 515 6 232 963-1E 575.00 761 514-1E 525.00

60 630 x 380 7.5 761 531-1E 825.00 761 533-1E 775.00

80 750 x 400 8.9 761 541-1E 925.00 761 542-1E 875.00

100 840 x 420 9 761 549-1E 945.00 761 550-1E 895.00

20 340 x 280 3.6 761 625-1E 390.00 761 626-1E 375.00

40 420 x 360 6.4 761 634-1E 490.00 761 635-1E 475.00

Ref. RON / each Ref. RON / each

233 064-1E 45.00 505 423-1E 41.00

233 005-1E 115.00 505 424-1E 105.00

761 536-1E 155.00 505 426-1E 150.00

761 545-1E 170.00 505 427-1E 165.00

761 553-1E 215.00 505 428-1E 205.00

Material

Capacity Height x external Ø at top Weight 1 – 4 items

5 – 9 Made of hot dip galvanised sheet steel

polyethylene

Model

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

BLUE = Short delivery period

23125

Bulk waste containers Lockable large waste bins

For outdoor

Large plastic waste collector with gravity lock

Capacity

Height x width x depth

Wheel Ø blue charcoal yellow green red brown

mm Ref. Ref. Ref. Ref. Ref. Ref. RON

Low noise large waste bins with lid d ampening mechanism. This dampens n oise made by the lid hitting the back of the container when it is opened. Large plastic waste bins complete with lock, including 2 keys. Cannot be used with waste sack holders. Two wheels with rubber tyres for easy handling.

120

240

360

Lockable

Lock opens when emptied by a garbage truck (when tilted more than 90°), the lid locks automatically when lowered back onto the ground

360

932 x 448 x 514 1005 x 505 x 555 1100 x 580 x 740 1115 x 665 x 880 1115 x 665 x 880 200 424 823-1E 424 824-1E 424 825-1E 424 826-1E 424 827-1E 424 828-1E 895.00

200 424 829-1E 424 830-1E 424 831-1E 424 832-1E 424 833-1E 424 834-1E 895.00

200 424 835-1E 502 274-1E 502 275-1E 502 276-1E 502 277-1E 502 279-1E 995.00

200 502 280-1E 502 281-1E 502 282-1E 502 283-1E 502 284-1E 502 285-1E 1250.00

300 502 287-1E 502 288-1E 502 289-1E 502 290-1E 502 291-1E 502 292-1E 1430.00

Set of stickers With six coloured symbols for biodegradable waste, glass, paper, refuse, plastic and metal. Height x width 180 x 160 mm.

Ref. 913 337-1E RON 120.00

ENVIRONMENT

• No unauthorised dumping of rubbish • No unauthorised removal of recyclable waste • Prevents unwanted emptying if a ccidentally tipped over • The locked container automatically opens when emptied by a garbage truck • Personal key for convenient opening and locking

Plastic large waste bins to DIN EN 840 With coloured lid

For outdoor

• Less noise when lid is closed due to dampening mechanism • Sturdy and durable, made of temperature and chemical resistant high d ensity polyethylene (HDPE) • Large capacity at a low weight

Model Capacity Height x width x depth Colour of lid blue yellow green

• T wo wheels with rubber tyres, wheel Ø 200 mm Container body in charcoal. Suitable waste sacks can be found on page 495.

l mm

80 975 x 448 x 670

120 970 x 505 x 555

240 1030 x 580 x 740

Ref. Ref. Ref. RON

483 791-1E 483 792-1E 483 793-1E 475.00

483 795-1E 483 796-1E 483 797-1E 490.00

483 799-1E 483 800-1E 483 801-1E 595.00

3 1

Paper bins, lockable Secure collection and disposal of sensitive documents

For outdoor

• Lockable • One-way deposit slot • Waste bin to DIN EN 840

1 Large waste bin

2 Large waste container

Deposit slot 290 x 27 mm. Reinforced, heavy duty lid. Lockable with cylinder lock, including two keys. Two wheels with rubber tyres, wheel Ø 200 mm.

Deposit slot 400 x 30 mm. Two sturdy lock fittings for use with padlocks (locks not included). Four solid rubber swivel castors, two with single wheel stop, wheel Ø 200 mm.

23126

Model Capacity Height x width x depth Ref. RON

l mm

YELLOW = Ex stock

240 1100 x 580 x 740 727 787-1E 1100.00

660 1250 x 1370 x 780 453 305-1E 2800.00

Lockable

Telefon 0250 702 110 service@kaiserkraft.ro

2 1

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

493

Bulk waste containers Please note Large waste bin with sliding lid and compliant with DIN EN 840-5 / -6, with child protection. Please enquire about the different types of lids a vailable.

Waste bin enclosures can be found in our web shop.

Large plastic waste containers EN 840 compliant

Model

Made of robust, temperature and chemical resistant, UV stabilised high density polyethylene. Drainage fitted to base. 4 solid rubber swivel castors, wheel Ø 200 mm, individual wheel stops.

For outdoor

Capacity Height x width Depth 1 – 4 items

charcoal blue yellow green red

5+ items

charcoal blue yellow green red

1 – 3 Pedal lid opener Available at extra cost. Cannot be fitted at a later stage. Please include with your order.

Accessories Waste sack for 1100 litre bulk waste container with flat lid. Pack of 30. Ref. 111 363-1E

l mm mm Ref. Ref. Ref. Ref. Ref. RON / each Ref. Ref. Ref. Ref. Ref. RON / each

660 1235 x 1360 765 761 432-1E 761 434-1E 761 437-1E 245 992-1E 761 439-1E 2700.00 761 433-1E 761 436-1E 761 438-1E 761 431-1E 761 440-1E 2500.00

770 1330 x 1360 770 761 444-1E 761 446-1E 761 448-1E 761 441-1E 761 450-1E 3200.00 761 445-1E 761 447-1E 761 449-1E 761 442-1E 761 452-1E 3000.00

1100 1470 x 1370 1115 909 623-1E 909 625-1E 909 627-1E 909 621-1E 909 630-1E 3300.00 909 624-1E 909 626-1E 909 628-1E 909 622-1E 909 631-1E 3200.00

1100 1465 x 1360 1070 754 672-1E 754 673-1E 754 674-1E 754 671-1E 754 675-1E 3300.00 754 678-1E 754 679-1E 754 680-1E 754 677-1E 754 681-1E 3200.00

Ref. RON

909 634-1E 825.00

909 635-1E 845.00

909 632-1E 845.00

Option Pedal lid opener

RON / pack 675.00

Large sheet steel waste containers EN 840 compliant

For outdoor

Made of hot dip galvanised sheet steel – extremely robust and durable with low tare weight.

1 Large waste bin For collecting waste in areas subject to fire hazards. 2 wheels, Ø 200 mm.

2 Special container for oily waste

Non-flammable container with tight closing lid. Wheel Ø 200 mm.

3 + 4 Large waste container

Model Capacity Height x width Depth 1 – 4 items

494 www.kaiserkraft.ro

5+ items

l mm mm Ref. RON / each Ref. RON / each

Water drain, rubber hand protection strip, lid latches on both sides. 4 solid rubber swivel castors, 2 with wheel stop.

With drawbar

240 1070 x 587 723 611 174-1E 2400.00 761 465-1E 2100.00

240 1195 x 587 723 761 466-1E 2400.00 761 467-1E 2300.00

1100 1420 x 1360 1020 754 682-1E 4800.00 754 683-1E 4650.00

1100 1420 x 1360 1020 754 685-1E 5630.00 754 686-1E 5380.00

4 With drawbar and towing connection made of hot dip galvanised steel. For on-site transport. Drawbar can be tilted upwards and locked in place.

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

23619

3+4

BLUE = Short delivery period

Bulk waste containers

from RON

365.00

Lid dampening mechanism

Reinforced model STOP

1 4 3

2 wheels with rubber tyres

For outdoor

Model

Capacity Height x width x depth 1–4 items charcoal blue brown yellow green red

l mm mm Ref. Ref. Ref. Ref. Ref. Ref. RON mm Ref. Ref. Ref. Ref. Ref. Ref. RON

Wheel Ø

5+ items charcoal blue brown yellow green red Accessories Waste sack holder

Ref. RON Ref. RON

Pedal lid opener

80 120 240 360 360 932 x 448 x 514 1005 x 505 x 555 1100 x 580 x 740 1115 x 665 x 880 1115 x 665 x 880 200 200 200 200 300 453 785-1E 233 129-1E 233 137-1E 123 587-1E 123 633-1E 453 786-1E 288 551-1E 288 578-1E 761 348-1E 761 361-1E 453 787-1E 714 648-1E 714 649-1E 761 359-1E 761 373-1E 453 788-1E 288 586-1E 288 594-1E 761 352-1E 761 366-1E 453 789-1E 288 608-1E 288 616-1E 123 625-1E 123 684-1E 453 790-1E 233 099-1E 233 102-1E 761 357-1E 761 371-1E 390.00 425.00 625.00 845.00 975.00 200 200 200 200 300 453 791-1E 761 325-1E 761 337-1E 761 351-1E 761 365-1E 453 792-1E 761 323-1E 761 335-1E 761 349-1E 761 363-1E 453 793-1E 761 333-1E 761 347-1E 761 360-1E 761 374-1E 453 794-1E 761 327-1E 761 340-1E 761 353-1E 761 367-1E 453 795-1E 761 329-1E 761 342-1E 761 356-1E 761 369-1E 453 796-1E 761 331-1E 761 344-1E 761 358-1E 761 372-1E 365.00 415.00 595.00 825.00 925.00 453 065-1E 125.00 944 697-1E 315.00

754 901-1E 190.00 944 697-1E 315.00

Mobile plastic waste bins DIN EN 840 compliant • S turdy and durable, made of temperature and chemical resistant high density polyethylene • Large capacity at a low weight • 2 wheels with rubber tyres

1 – 3 In EUROKRAFT quality 2 + 3 Especially robust reinforced design for heavy duty applications. Waste sack holders available as an accessory.

ENVIRONMENT

Selfextinguishing

With sound absorbing damper for quiet o pening

1 – 3 Accessories Waste sack holder For easy, secure attachment of waste sacks. Please include with your order for the corresponding large waste bin. Easy assembly. Can also be fitted at a later stage.

Pedal lid opener

754 902-1E 195.00 944 698-1E 340.00

For hands free and hygienic opening. Zinc plated. Easy assembly on the right wheel. Can also be fitted at a later stage.

Suitable waste sacks Waste sacks made of LDPE

Model Waste sacks made of LDPE

Biodegradable waste sacks • Biodegradable, compostable, water resistant Capacity l 80 120

23131

240

Biodegradable waste sacks

1000 120 240

YELLOW = Ex stock

Colour blue blue yellow green transparent blue transparent yellow transparent green transparent transparent natural natural

Pack of pcs. 150 150 200 200 200 100 100 100 100 100 90 90

Ref.

RON / pack

741 118-1E 695 807-1E 985 151-1E 985 150-1E 985 152-1E 511 919-1E 985 156-1E 985 154-1E 722 604-1E 603 390-1E 985 160-1E 985 161-1E

675.00 725.00 925.00 925.00 925.00 825.00 1100.00 1100.00 975.00 775.00 1280.00 1750.00

Telefon 0250 702 110 service@kaiserkraft.ro

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

495

Recyclable waste collectors Waste wool cases The classic collection bin for cleaning wool – also ideal for other types of waste. Made of painted sheet steel, bevelled and welded, two drop handles at the sides for easy transport.

1 With sloping lid

With self-closing access flap Swing lid is flame retardant and odour retardant. Painted in flame red RAL 3000.

2 Swing lid for access from both sides 3 Self-closing access flap

Fitting for padlock. Painted blue grey RAL 7031.

Model Capacity Width x depth Height flame red RAL 3000

1 3

blue grey RAL 7031 Accessories Partition

1 l mm mm Ref. RON Ref. RON

170 625 x 375 980

230 750 x 425 980

310 1000 x 425 980

229 555-1E 1050.00

229 571-1E 1200.00

229 601-1E 1450.00

Ref. RON

229 563-1E 275.00

70 400 x 400 680 258 873-1E 1080.00

120 500 x 400 880 229 636-1E 1180.00

Waste collectors

Selfextinguishing

• Self-extinguishing in accordance with M01/07 and M03/07 TÜV NORD • Made of sheet steel – robust and durable • Zinc plated inner bin • Both models with access flaps on opposing sides • Ideal for workshops and storage

With inner bin

1 Removable top

Zinc plated inner bin can be lifted out.

2 Inner bin can be removed from the front

Very easy to empty.

Model Capacity Height x width x depth white aluminium / coarse texture signal yellow RAL 1003

Two folding handles on the sides. High quality powder coating.

l mm Ref. Ref. RON

95 870 x 450 x 450 233 188-1E 714 854-1E 1380.00

79 870 x 450 x 450 687 600-1E 714 855-1E 1480.00

Recyclable waste collector sorting systems Ideal for high traffic areas

• • • •

Very compact and space saving Wide opening hinged doors for easy emptying Self-closing swing flaps From TÜV-certified production in Germany

1 Body light grey RAL 7035

Container made of zinc plated, powder coated sheet steel. Zinc plated 45 litre inner container. Non-flammable in accordance with DIN 4102 and DIN EN 13501-1. Plastic floor protection ring and high q uality container guides make the containers robust and durable. Lockable with supplied square key. Supplied complete with pictograms for recyclables.

Flaps made of sheet steel, powder coated in blue RAL 5010, yellow RAL 1003, charcoal RAL 7016 and red RAL 3000.

2 Body mocha colour, similar to RAL 8019

Stainless steel flaps with studded leather texture.

PE waste sacks Pack of 200. Ref. 944 699-1E

Inner containers

Height x width x depth light grey RAL 7035 Colour of loading flap

3 x 45

4 x 45

975 x 860 x 320 gentian blue RAL 5010 / signal yellow RAL 1003 / charcoal RAL 7016

975 x 1100 x 320 gentian blue RAL 5010 / signal yellow RAL 1003 / charcoal RAL 7016 / flame red RAL 3000

Ref. RON

944 678-1E 3250.00 stainless steel 944 679-1E 4200.00

944 680-1E 4250.00 stainless steel 944 681-1E 5380.00

3250.00

RON Nr. 944 678-1E

496 www.kaiserkraft.ro

grey brown, similar to RAL 8019

Colour of loading flap Ref. RON

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

RON / pack 390.00

BLUE = Short delivery period

23620

With inner bin

Recyclable waste collectors Recyclable waste collection stations Stationary recyclable waste collectors for separating waste With inner bin

• Compact station with three sections • For immediate and efficient sorting of recyclable waste • Simple and quick installation • Easily removable inner containers

1 Body in grey RAL 9006 Made of powder coated sheet steel, with 3 zinc plated inner containers.

2 Black body

Height x width x depth 850 x 455 x 825 mm.

Made of powder coated sheet steel, with 3 zinc plated inner containers.

3 Stainless steel body With 3 zinc plated inner containers.

4 Transparent body Frame made of zinc plated sheet steel, front made of Plexiglas.

1 2

Model Inner containers Ref. RON

1 x 70 / 2 x 40 123 150-1E 4950.00

1 x 70 / 2 x 40 123 149-1E 4950.00

1 x 70 / 2 x 40 123 148-1E 5980.00

1 x 70 / 2 x 40 123 147-1E 5980.00

Recyclable waste containers

from RON

875.00

1 45 litre container

Set of stickers

Dollies

With six coloured symbols for biodegradable waste, glass, paper, refuse, plastic and metal. Height x width 180 x 160 mm.

The practical dolly for 4 containers. Solid steel frame, hot dip galvanised and powder coated light grey. 2 swivel castors and 2 fixed castors. Swivel castors with wheel stops.

Ref. 913 337-1E

Ref. 754 926-1E

Mobile version with 4 swivel castors, 2 with wheel stops.

2 65 litre container Includes zinc plated, inner container, water tight at base.

With inner bin

Selfextinguishing

RON / set 120.00

Model Capacity Type Height x width x depth traffic green RAL 6024 signal yellow RAL 1003 light grey RAL 7035 flame red RAL 3000 gentian blue RAL 5010 stainless steel

23132

2 YELLOW = Ex stock

ENVIRONMENT

Selfextinguishing

• Self-extinguishing in accordance with M01/07 TÜV NORD standard • Self-closing, durable access flap • Fire and odour retardant • Removable top part • Can be used separately, or combined to form a collection station

Accessories Waste sacks Pack of 250 pcs.

Telefon 0250 702 110 service@kaiserkraft.ro

RON 1700.00

1 l mm Ref. Ref. Ref. Ref. Ref. RON Ref. RON Ref. RON / pack

45 stationary 650 x 320 x 310 754 912-1E 754 914-1E 754 911-1E 754 910-1E 614 448-1E 875.00 521 259-1E 2050.00 909 448-1E 215.00

2 mobile 710 x 320 x 310 754 917-1E 754 920-1E 754 916-1E 754 915-1E 614 449-1E 975.00

909 448-1E 215.00

65 stationary 960 x 400 x 380 754 923-1E 754 925-1E 754 922-1E 754 921-1E 614 450-1E 1500.00 521 260-1E 3400.00 909 449-1E 400.00

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

497

Recyclable waste collectors from RON

1130.00

Selfextinguishing

Recyclable waste collectors

Model

Stationary and mobileStationary and mobile

Capacity Height x width x depth Colour of loading flap gentian blue RAL 5010 flame red RAL 3000 light grey RAL 7035 signal yellow RAL 1003 traffic green RAL 6024

• Proven flame resistance with certificate – TÜV/GS tested (German standards) • Can be used separately, or combined to form a collection station • 2 steel castors with rubber tread – tilt slightly to move

Housing and swing lid made of zinc plated sheet steel, body powder coated in charcoal RAL 7016. Stainless steel handle. Pictograms for recyclable materials available as accessory.

Accessories Waste sacks Pack of 250 pcs.

l mm

45 650 x 380 x 320

60 790 x 380 x 320

75 940 x 380 x 320

Ref. Ref. Ref. Ref. Ref. RON

521 204-1E 984 871-1E 984 874-1E 984 870-1E 984 873-1E 1130.00

521 206-1E 984 877-1E 984 880-1E 984 875-1E 984 879-1E 1450.00

521 207-1E 984 882-1E 984 886-1E 984 881-1E 984 885-1E 1750.00

Ref. RON / pack

722 546-1E 390.00

558 966-1E 475.00

With inner bin

Swing lid recyclable waste collectors 1 Single recyclable waste collector

• • • •

Can be used individually or as a collection station Self-closing swing lid Robust container made of powder coated sheet steel Non-flammable in accordance with DIN 4102 / EN 13501-1

Covers feature colours all round – the respective type of recyclable waste is identifiable from all sides. Easy to empty using hinged doors. Two adjustable feet for levelling. Body in grey aluminium/structured. From TÜV certified production in Germany. Includes zinc plated inner container and square key.

498 www.kaiserkraft.ro

2 3-piece recyclable waste collection station

With 30 or 70 litre capacity. Different hood colours. Capacity Height x width x depth Colour of lid sand yellow RAL 1002 flame red RAL 3000 gentian blue RAL 5010 traffic green RAL 6024 charcoal RAL 7016 Accessories PE waste sacks Pack of 250 pcs.

600 x 300 x 300

850 x 400 x 380

Ref. Ref. Ref. Ref. Ref. RON

111 248-1E 111 249-1E 111 250-1E 111 251-1E 111 253-1E 1380.00

111 258-1E 111 259-1E 111 261-1E 111 262-1E 111 263-1E 1650.00

Ref. RON / pack

909 448-1E 215.00

928 015-1E 400.00

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

Three containers, for connection in a row. Capacity Ref. RON

3 x 30 111 254-1E 3900.00

4 x 30 111 255-1E 5130.00

3 4-piece recycling station

Four containers, for connection in a square configuration. Capacity Ref. RON

3 x 70 111 256-1E 4700.00

BLUE = Short delivery period

4 x 70 111 257-1E 6130.00

23621

For efficient separation or recyclable waste

Recyclable waste collectors Recyclable waste container system

Selfextinguishing

With inner bin

Lockable

• With a shock absorbing gas spring – closes quietly • Proven flame resistance with certificate, TÜV/GS tested • With extendable waste sack holder or with a tested selfextinguishing zinc plated inner container • Easy to empty – lockable door • All models can be combined with one another The rounded collector hood is permanently connected to body and prevents rubbish from being placed on top of the collector. Handle and pedal made of stainless steel. Supplied complete with adhesive film set for colour coding the access flaps. With 1 sticker each in sand yellow RAL 1002, pigeon blue RAL 5014, pale green RAL 6021 and charcoal RAL 7016. Sheet steel model Zinc plated and additionally powder coated. Collector completely in grey aluminium/structured finish or light grey. Stainless steel model Body, hood and access flap made of high quality, brushed stainless steel. Ideal for outdoor, hygienic and wet areas.

ENVIRONMENT

Hand operated access flap

Set of stickers With six coloured symbols for biodegradable waste, glass, paper, refuse, plastic and metal. Height x width 180 x 160 mm. Ref. 913 337-1E

RON 120.00

Adhesive film set for colour coding the access flaps Type

waste sack holder

Capacity Height x width x depth

l mm

inner container

Ref. Ref. RON Ref. RON

45 800 x 400 x 380 531 631-1E 521 268-1E 1400.00 531 665-1E 3400.00

60 900 x 400 x 380 531 633-1E 521 269-1E 1700.00 531 666-1E 3600.00

75 1000 x 400 x 380 531 636-1E 521 270-1E 1750.00 531 667-1E 3650.00

120 1100 x 450 x 450 531 638-1E 521 271-1E 2700.00 531 668-1E 4600.00

45 800 x 400 x 380 531 640-1E 521 273-1E 1700.00 531 670-1E 3700.00

60 900 x 400 x 380 531 643-1E 521 274-1E 1900.00 531 671-1E 3850.00

75 1000 x 400 x 380 531 645-1E 521 275-1E 1950.00 531 672-1E 4000.00

120 1100 x 450 x 450 531 647-1E 521 276-1E 3000.00 531 673-1E 5380.00

Ref. RON / pack

722 546-1E 390.00

928 015-1E 400.00

909 448-1E 215.00

909 449-1E 400.00

928 015-1E 400.00

light grey grey aluminium/structured stainless steel Accessories Waste sacks Pack of 250 pcs.

Floor level adjustment screw

Pedal operated access flap Type Capacity Height x width x depth light grey grey aluminium/structured

26404

stainless steel Accessories Waste sacks Pack of 250 pcs.

waste sack holder l mm

inner container

Ref. Ref. RON Ref. RON

45 800 x 400 x 380 531 649-1E 521 277-1E 1700.00 531 674-1E 3800.00

60 900 x 400 x 380 531 652-1E 521 278-1E 1900.00 531 675-1E 3950.00

75 1000 x 400 x 380 531 654-1E 521 279-1E 1750.00 531 676-1E 4100.00

120 1100 x 450 x 450 531 656-1E 521 281-1E 3300.00 531 678-1E 4900.00

45 800 x 400 x 380 531 658-1E 521 282-1E 1900.00 531 679-1E 4150.00

60 900 x 400 x 380 531 660-1E 521 283-1E 1750.00 531 680-1E 4200.00

75 1000 x 400 x 380 531 662-1E 521 284-1E 2250.00 531 681-1E 4450.00

120 1100 x 450 x 450 531 664-1E 521 285-1E 3650.00 531 682-1E 5980.00

Ref. RON / pack

722 546-1E 390.00

928 015-1E 400.00

909 448-1E 215.00

909 449-1E 400.00

928 015-1E 400.00

YELLOW = Ex stock

Telefon 0250 702 110 service@kaiserkraft.ro

Pedal for easy opening

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

499

Recyclable waste collectors Recyclable waste collection cupboards • • • •

Efficient waste separation Double doors for easy emptying High quality powder coating Four adjustable feet for levelling

Made of zinc plated and powder coated sheet steel. Inner container made of zinc plated sheet steel with bar handle. Lockable with cylinder lock (1 key).

1 Capacity 2 x 50 l Two self closing access flaps in yellow RAL 1023 (recyclable waste) and black grey (refuse).

2 Capacity 3 x 50 l Three self closing access flaps in yellow RAL 1023 (recyclable waste), black grey (refuse) and gentian blue (paper).

3 Capacity 3 x 80 l Two access openings: yellow RAL 1023 and blue RAL 5010. One self closing access flap.

4 Capacity 4 x 50 l Two permanently fitted access openings: yellow RAL 1023 (recyclable material) and gentian blue (paper).

With inner bin

Model Inner containers Height x width x depth light grey RAL 7035 antique silver Accessories Plastic sacks Pack of 250 pcs. Castor set

1 l mm Ref. Ref. RON

2 x 50 910 x 610 x 325 499 586-1E 499 587-1E 3700.00

Ref. RON / pack Ref. RON

408 883-1E 475.00 111 399-1E 325.00

3 x 50 3 x 80 4 x 50 910 x 880 x 325 975 x 1080 x 375 910 x 1150 x 325 499 589-1E 111 398-1E 499 592-1E 499 590-1E 111 397-1E 499 593-1E 4450.00 3800.00 4950.00 408 883-1E 475.00 111 399-1E 325.00

408 883-1E 475.00 111 399-1E 325.00

Two self closing access flaps: red (cleaning cloths) and black grey (other waste).

Accessories PE waste sacks Pack of 250. Castor set Consisting of 5 swivel castors, 2 with wheel stops.

Recyclable waste collectors With inner bin

• • • •

Self-closing access flap contains odours Made of zinc plated, powder coated sheet steel Practical handles for easy lifting of the top part Removable inner container

Accessories

Capacity Height x width x depth antique silver gentian blue RAL 5010 flame red RAL 3000 pebble grey RAL 7032 emerald green RAL 6001 traffic yellow RAL 1023 Accessories Set of stickers Plastic sacks Pack of 250 pcs.

500 www.kaiserkraft.ro

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

790 x 320 x 320

890 x 380 x 380

Ref. Ref. Ref. Ref. Ref. Ref. RON

111 222-1E 111 224-1E 111 226-1E 111 227-1E 111 223-1E 111 225-1E 1400.00

111 229-1E 111 231-1E 111 233-1E 111 234-1E 111 230-1E 111 232-1E 1650.00

Ref. RON Ref. RON / pack

913 337-1E 120.00 408 883-1E 475.00

913 337-1E 120.00 558 966-1E 475.00

BLUE = Short delivery period

26410

Set of colour stickers. With six coloured symbols for biodegradable waste, glass, paper, refuse, plastic and metal. Height x width 180 x 160 mm. 70/120 litre waste sacks made of polyethylene (PE). Pack of 250.

Recyclable waste collectors 2

Recyclable waste collection stations • Each collection station with 3 coloured 30 litre containers • Containers can be removed separately

Top part serves as a clamping ring for waste sacks. Base and top part in silver similar to RAL 9022. Base and top part (without / with roof) in charcoal RAL 7021.

Type Height x Ø yellow / blue / red yellow / blue / green yellow / blue / grey stainless steel Accessories Wheel set Waste sacks Pack of 360 pcs.

1 + 2 Base as standard with plastic feet.

without cover

with cover

mm Ref. Ref. Ref. RON Ref. RON

720 x 420 727 728-1E 727 730-1E 727 732-1E 1600.00 727 736-1E 2350.00

950 x 420 727 729-1E 727 731-1E 727 735-1E 2050.00 727 737-1E 2750.00

Ref. RON Ref. RON

727 745-1E 150.00 985 144-1E 365.00

Self extinguishing waste collectors – modular Square or quarter circle

With inner bin

Model l

Capacity Height x width white silver grey black stainless steel, matt Accessories Plastic sacks Pack of 250 pcs.

mm Ref. Ref. Ref. RON Ref. RON Ref. RON / pack

Self extinguishing modular designer waste collector that fits in with all representative rooms due to its attractive form. Available as a square in 4 colours. Also extremely well suited for separating waste. Indicator signs for attaching to the back of the waste collector are available as accessories.

Options

Indicator board

760 x 350 493 050-1E 493 049-1E 493 048-1E 1800.00 493 046-1E 2500.00

493 061-1E 493 060-1E 493 059-1E 1900.00 493 056-1E 2700.00

493 055-1E 493 054-1E 493 053-1E 275.00 493 051-1E 375.00

408 883-1E 475.00

Compact 2 or 3 compartment recyclable waste collectors • Made of zinc plated, high quality sheet steel • High quality, robust powder coating (impact and scratch resistant) • The inner container can be removed through lockable double doors • Self-closing access flaps

Model

26411

Capacity Height x width x depth

Accessories Waste sacks 60 l Pack of 250 pcs. 75 l Pack of 250 pcs.

Zinc plated high quality sheet steal with valuable, robust powder coating (impact and scratch resistant) ensures a longer life also with heavy duty usage. The capacity is optimal for regular waste disposal and requires a minimal surface space of less than half a m².

l mm Ref. RON

60 + 30 920 x 580 x 380 111 241-1E 2150.00

3 x 30 920 x 580 x 380 111 242-1E 2250.00

Ref. RON / pack Ref. RON / pack

909 448-1E 215.00 909 449-1E 400.00

909 448-1E 215.00

YELLOW = Ex stock

ENVIRONMENT

• Flame extinguishing with TÜV certificate • Open slot – for direct disposal without contact • Removable inner container made of steel with handle

Selfextinguishing

Body: light grey RAL 7035 Access flaps: signal yellow RAL 1003, gentian blue RAL 5010 or charcoal RAL 7016 Available with a castor set on request

Telefon 0250 702 110 service@kaiserkraft.ro

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

501

Waste sacks Plastic sacks • M ade of environmentally friendly, recycled, low density polyethylene (PE) • Can be safely incinerated, as polyethylene (PE) consists of carbon and hydrogen

PREMIUM LDPE waste sacks Environmentally friendly as they are made of 100 % recycled low density polyethylene. Soft and elastic, “minimal ripping” when punctured. • PE does not affect the ground water at refuse sites and does not release polluting gases or substances

UNIVERSAL HDPE waste sacks Made of high grade, high density polyethylene. Particularly resistant to punctures, very good technical characteristics even when material is very thin. Slight variations in colour are possible.

1 Rubbish bin bags

Capacity

Width x height

Material

Colour

Pack of

l 16 24 30 30 60 60

mm 450 x 540 500 x 600 540 x 580 500 x 600 620 x 750 300 x 300 x 700

HDPE HDPE HDPE HDPE HDPE LDPE

transparent transparent transparent grey transparent white

pcs. 2000 2000 2000 2500 2000 250

Ref.

RON / pack

508 829-1E 508 845-1E 508 853-1E 985 127-1E 985 128-1E 508 861-1E

365.00 415.00 440.00 545.00 1500.00 315.00

Ref.

RON / pack

985 129-1E 985 132-1E 985 131-1E 985 130-1E 985 133-1E 985 134-1E 408 883-1E 508 896-1E 508 926-1E 508 918-1E 508 934-1E 508 942-1E

350.00 350.00 350.00 350.00 350.00 350.00 475.00 475.00 475.00 475.00 475.00 475.00

Ref.

RON / pack

760 932-1E 985 137-1E 985 136-1E 985 135-1E 985 138-1E 985 141-1E 985 140-1E 558 966-1E 754 971-1E 509 043-1E 509 035-1E 509 078-1E 509 086-1E 509 094-1E 509 108-1E 509 124-1E 509 116-1E 509 132-1E 509 140-1E

415.00 415.00 415.00 415.00 415.00 415.00 415.00 475.00 475.00 475.00 475.00 475.00 475.00 725.00 725.00 725.00 725.00 725.00 725.00

2 PE sacks, capacity 70 litres

Capacity tolerance +/–5 % Capacity

Width x height

Material

l 70 70 70 70 70 70 70 70 70 70 70 70

mm 575 x 1000 575 x 1000 575 x 1000 575 x 1000 575 x 1000 575 x 1000 575 x 1000 575 x 1000 575 x 1000 575 x 1000 575 x 1000 575 x 1000

LDPE LDPE LDPE LDPE LDPE LDPE LDPE LDPE LDPE LDPE LDPE LDPE

Material thickness µm 40 40 40 40 40 40 55 55 55 55 55 55

Colour

Pack of

blue yellow green red black transparent blue yellow green red black transparent

pcs. 250 250 250 250 250 250 250 250 250 250 250 250

Material thickness µm 34 37 37 37 37 37 37 55 55 55 55 55 55 25 25 25 25 25 25

Colour

Pack of

blue yellow green red black transparent white blue yellow green red black transparent blue yellow green red black transparent

pcs. 250 250 250 250 250 250 250 250 250 250 250 250 250 500 500 500 500 500 500

3 PE sacks, capacity 120 litres

Capacity tolerance +/–5 % Capacity

Width x height

Material

l 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120

mm 700 x 1100 700 x 1100 700 x 1100 700 x 1100 700 x 1100 700 x 1100 700 x 1100 700 x 1100 700 x 1100 700 x 1100 700 x 1100 700 x 1100 700 x 1100 700 x 1100 700 x 1100 700 x 1100 700 x 1100 700 x 1100 700 x 1100

LDPE LDPE LDPE LDPE LDPE LDPE LDPE LDPE LDPE LDPE LDPE LDPE LDPE HDPE HDPE HDPE HDPE HDPE HDPE

Wire twister

Quick fasteners

For plastic and paper sacks. Twist neck of sack. Put wire loop (accessory) over, attach twister, twist it, finished.

• Reclosable • Recyclable

Ref. 408 999-1E RON 190.00

Made of red polyethylene. Ideal for closing bags and sacks. For bundling cables, hoses, wires, or as an auxiliary fastening. Can be hung up by two openings.

With plastic coating, 200 mm long. Pack of 5000. Ref. 409 006-1E

502 www.kaiserkraft.ro

RON / pack 925.00

Length mm 140 190 245

Prețurile din catalog sunt orientative. Prețurile actuale pot fi găsite pe www.kaiserkraft.ro

Pack of pcs. 1000 1000 1000

Ref.

RON / pack

760 940-1E 760 941-1E 760 942-1E

245.00 390.00 490.00

BLUE = Short delivery period

23136

Wire loops

Waste sacks 1 Large capacity waste sacks

2 Bags for wire mesh baskets

• Capacity 400 litres

• Capacity 65 litres

Waste sacks for recyclables such as paper and films, 60 µm thick. Ideal for large recyclable waste collectors.

Suitable for all wire mesh baskets with approx. 1200 mm circumference and height of 630 mm.

On request, we can also supply bags with other dimensions and with imprint. Model

Capacity

Length x width x height

Material

Colour

Pack of

1 2

l 400 65

mm 600 x 450 x 1600 365 x 245 x 850

LDPE LDPE

transparent white

pcs. 100 360

3 Sacks with loop ties

4 Heavy duty sacks

• Capacity 120 litres • 100% volume utilisation • Tie and loop handle in one

• Capacity 120 litres • High strength plastic

Model

Capacity

Length x width x height

3 4

l 120 120 120 120

mm 700 x 50 x 1050 700 x 1100

Material

LDPE LDPE LDPE LDPE

Material thickness µm 50 80 150 200

Ref.

RON / pack

614 341-1E 985 144-1E

675.00 365.00

4 3

Colour

Pack of

blue blue blue blue

pcs. 250 200 125 100

Ref.

RON / pack

760 939-1E 760 933-1E 985 146-1E 985 148-1E

450.00 595.00 795.00 775.00

5 The easy way to separate waste Capacity tolerance ±5 %.

Capacity

Length x width x height

l 240 120 240 120 240 120 240

mm 650 x 550 x 1350 700 x 250 x 1200 650 x 550 x 1350 700 x 250 x 1200 650 x 550 x 1350 700 x 250 x 1200 650 x 550 x 1350

Material

Material thickness µm 80 50 80 50 80 50 48

LDPE HDPE LDPE HDPE LDPE HDPE polyethylene

6 Paper sacks • Very robust – particularly suitable for heavy, bulky rubbish

Capacity l 70

Length x height mm 850

120

950

Quality g/m² 70

Colour

Pack of

blue yellow transparent yellow green transparent green transparent transparent

pcs. 100 200 100 200 100 200 100

Ref.

RON / pack

511 919-1E 985 151-1E 985 156-1E 985 150-1E 985 154-1E 985 152-1E 722 604-1E

825.00 925.00 1100.00 925.00 1100.00 925.00 975.00

ENVIRONMENT

120 l and 240 l waste bins and other waste containers can be found on pages 493 and 495.

• Sacks for 120 and 240 litre waste bins

Made from 100% recycled Kraft paper, 70 g/m², brown, waterproof gluing. Recyclable and completely biodegradable.

Colour

Pack of pcs. 100 500 100 250 500

brown

Ref.

RON / pack

408 921-1E 408 964-1E 408 930-1E 408 956-1E 408 972-1E

775.00 2900.00 925.00 1750.00 3100.00

8 Biodegradable waste sacks Particularly for the collection of c ompostable waste.

23135

Biodegradable paper sacks 7 Made of recycled paper, 80 g/m².

Model

Capacity

Length x width x height

7 8 9

12 10 120 240

215 x 150 x 360 430 x 500 480 x 470 x 1300 560 x 540 x 1400

YELLOW = Ex stock

Biodegradable plastic sacks 8 Made of ecovio®, an innovative, fully compostable material. Certified in accordance with EN 13432. Moisture resistant. Traps odours. Made of more than 50% regenerative raw materials. Material thickness – 20 25 25

9 Made of corn starch and synthetic polymers. Compostable in accordance with DIN 54900. Water resistant. Traps odours. For large 120 litre waste bins.

Colour

Pack of

brown transparent green natural natural

100 500 90 90

Ref.

RON / pack

985 158-1E 985 159-1E 985 160-1E 985 161-1E

140.00 1250.00 1280.00 1750.00

Telefon 0250 702 110 service@kaiserkraft.ro

KAISER+KRAFT EVERYTHING FOR THE BUSINESS.

503