MATERIAL DATASHEET
AgSnO2 Material: Alloy Composition: Revision: Date: Page:
Propelling Contacts Into the Future
Silver Tin Oxide AgSnO2 (10) / (12) / (14) / (17) A 01-01-2022 1 of 1
ARTICLE NO
AgSnO2-W-001
OVERVIEW 1.1 Context
This datasheet is applicable for AgCdO Silver Cadmium Oxide material in wire form.
1.2 Supply State:
Wire
1.3 Manufacturing Technology:
Powder Metallurgy / Atomizing-Sintering-Extrusion (ASE)
CHARACTERISTICS • Higher Welding Resistance • Low Arc Erosion • Less Material Migration
2.1 General
PROPERTIES 3.1 3.2 3.3 3.4 3.5
Silver Content (Wt.%): Density (g/cm3): Resistance (μΩ.cm): Vickers Hardness (HV): Manufacture Method:
MICROSTRUCTURE 200x
Horizontal
Vertical
AgSnO2 (10) 89 - 91 9.8 - 10.00 2.00 - 2.30 75 ~ 115 ASE
AgSnO2 (12) 87 -89 9.75 - 9.95 2.10 - 2.30 80 ~ 120 ASE
AgSnO2 (14) 85 - 87 9.70 - 9.90 2.30 - 2.50 95 ~ 120 ASE
AgSnO2 (10) 89 - 91 9.75 - 9.95 2.05 - 2.25 60 ~ 120 PM
AgSnO2 (12) 87 - 89 9.65 - 9.85 2.15 - 2.35 60 ~ 120 PM
APPLICATION
Voltage Relay
Contactor
Circuit Breakers
Socket/Switch
©2022 Juxing Electrical Contact Technology Pte Ltd This publication are prohibited to be reproduced in any form in whole or part without the express written consent from Juxing Electrical Contact Technology Pte Ltd (JECT). JECT reserved all rights to make any changes to the material and/or alloy composition to improve performace and reliability without prior notice. The material data indicated in this sheet is based on our internal assessment and should not be treated as the absolute without confirmation from Juxing.