Juliano's Hot Rod Parts Catalog 16

shop 24/7 @ www.julianos.com

Catalog Number 16 $5.00

ordering and sales policy Shipping

We try to ship all orders for stock merchandise the same day we receive the order. Of course all specially made items will take longer. Our courteous sales people will be able to tell you at the time you place the order when to expect delivery. We ship UPS, US Postal Service and FEDEX.

Ordering

Order using the descriptions and prices in this catalog or for faster service, call us at 800-300-1932 (ORDERS ONLY).

For technical questions, call 860-872-1932. When ordering, remember to include color as well as make, model and year of car where applicable. Payment can be made by Visa, Mastercard or Discover Cards. Shipping is additional. You can also Fax orders to 860-872-4114

Gift Certificates

The Juliano’s Interior Products gift certificates are an ideal gift.

They are available in any amount and ordering one is as easy as picking up the phone and calling 860-872-1932.

Prices

We try to maintain the prices listed in this catalog, however, due to the changing prices of raw material, we reserve the right to change prices without notice.

Guarantee

All products are sold without warranty, either express or implied unless indicated in the product description. The effectiveness of safety related products such as seat belts cannot be guaranteed because we have no control over installation.

Returns

All sales are final and merchandise may be returned only with the consent of Juliano’s Interior Products. Approved returns are subject to a handling charge of not less than 15%. All products approved for return must be shipped pre-paid freight. Special orders, cut goods, used, misused, or altered products cannot be returned. No returns after 30 days. No returns on installed electrical parts or safety items. Must call to obtain a return number.

Claims

Claims for damaged or lost merchandise are to be made to the freight carrier. If you receive a damaged package or a package that looks like it has been opened or otherwise tampered with, make a written note of this to the freight carrier upon signing for the package. A verbal note to the driver is not sufficient.

Carefully open and be sure to save the damaged container as visible proof of damage. This proof of damage is the first thing the carrier will ask to see. Notify the local office of the freight carrier as soon as the damage is discovered in writing (no later than 48 hours after receipt of goods). Claims for shortage of merchandise (other than lost items) are to be made to us within 5 days of receipt of your order.

Thank You

Thank you for selecting Juliano’s Interior Products for your car. We will do everything possible to help you with technical advice, purchasing information and anything else we can do to help complete the interior of your car in a professional manner.

In addition to what you see in our catalog, we are dealers for the following companies: Big Al’s Carponents Billet Specialties Bob Drake Borgeson Universal Budnik Wheels Crow Enterprises Dakota Digital Flaming River Industries ididit, Inc. Lokar, LTD

Cover: 1932 Ford Five-window coupe owned by United Pacific Industries

To order, call: 800-300-1932 Fax orders: 860-872-4114 • Tech help: 860-872-1932 www.julianos.com • 100 Windermere Ave. • Ellington, CT 06029 Look for the Juliano’s Design Logo. It signifies products that are proudly designed and manufactured by Juliano’s in the USA. • Catalog Design and Production by Art Ferron • All products and prices are subject to change without notice. ©2016 Juliano’s Interior Products

2

New Port Engineering Rock Valley Antique Auto Rocky Hinge Co. Rostra Precision Control Sun Spec Billet Factory Tea’s Design Seats Total Performance, Inc. Vintage Air Vintique Watson’s Streetworks

shop 24/7 @ www.julianos.com

Seat BELT index

Seat Belt colors and info - 4-5

Adjustable Lap Belts - 6-7

HOT ROD PARTS Alphabetical index

Retractable Lap Belts - 8-9

3-Point Retractable Shoulder Belts - 10-12

Actuators - 30

Flashers - 35

Seat Belt Accessories - 12-13

Aerobrite Systems - 36

Floor Mounts, Column 19-21

Antenna, In-Car - 30

Gas Pedals - 23, 27

Seat Belt Color Swatches - 4, 5, 15

Armrests - 27

Gauge Panel - 23

Back-up Cameras - 22

Gear Shift Indicator - 23

Battery Cut-Offs - 30

Guide Lights - 37

Battery Power Posts - 30

Headlamps - 36-37

Bear Claw Latches,

Headlights - 36-37

Plates - 25

Hood Props - 29

Brake/Clutch Pedal Trim - 20

Horn Buttons - 16-17

Brake Light Switch - 30

Horns - 31

Split Third Brake Light - 32-33 Steering Column Accessories - 19-21, 23

Insulation - 38

Steering Columns - 18-20

Insultek - 38

Steering Wheel Adapters - 17

Interior Lights - 28

Steering Wheels - 16-17

Latch Kit, Suicide - 30

Suicide Safety Latch - 30

Latches, Bear Claw - 27

Switch Plates - 25

LED Brake Lights - 34-35

Switches - 25, 28

LED Lights - 32-37

Tail Lights - 23, 29, 32-35

LED Third Brake

Third Brake Lights - 29, 32-33

Lights - 32-33

Throttle Pedals - 23, 27

License Plate Frames - 29

Top Insert Kit - 39

License Plate Lights - 29

Turn Signals - 32-37

Lokar Products - 23

Vanity Mirror - 29

Magnaflectors - 32

Vent Crank - 27

Mirrors, Rear View - 22, 26, 27

Vent Eliminating Kit - 26

Brake Pedals - 27 Bug Screens - 40 Cable Shift Linkage - 19 Car Cover 40 Carbon Fiber Service - 42-43

Seat Belt Hardware Kits, Accessories and Webbing by the foot - 12-13 OEM Style Direct Fit

Carpet Underlay - 38 Column Drops - 19, 21 Courtesy Lights - 28 Cowl Vent, Power - 30 Cruise Control - 23 Custom Woodgrain Service - 42-43 Dash Light Kit - 28 Dimmer Pedal - 27 Dome Lights - 28 Door Actuator 25, 30 Door Checks - 25 Door Handles - 27 Door Latch, Bear Claw - 25

Direct Fit Seat belts - 14

Power Cowl Vent - 30 Power Window Kits - 24 Power Window Accessories - 24-26

Door Latch, Suicide Safety - 30

Pro-Clamps - 41

Exhaust Coupling - 41

Registration Holder - 29

Fender Welt - 40

Direct Fit Seat belt colors - 15

Parking Lights - 33-37

Filler Panels, Headlight - 36

Prop Rods - 29

Seat Belt Information - 5 Seat Belts - 6-14 Signal Finder - 26 Soft Top Insert Kit - 39 Sound Deadener - 38

Vent, Power Cowl - 30 Visors - 29 Window Cranks - 27 Windshield Slides - 29 Wiper Arms - 31 Wiper Motors - 31 Wire Looms - 24, 26 Woodgrain Service - 42-43

Remote Control - 25

order toll free 1•800•300•1932

3

seat belt colors Every seat belt Juliano’s sells meets Federal Specs FMVSS No. 209, FMVSS No. 302 and SAE No. J386

• Largest selection of colors and styles anywhere • All in stock items ready for immediate shipping

• Loads of seat belt accessories • Exclusive mounting hardware and accessories

Stocking Colors

Uses Tan Plastic

**01 Black

**02 Ivory

**03 Gray

**06 Blue

**04 Charcoal

**05 Tan

**08 Berry

**11 Maroon

**24 Copper

**26 Lear Blue

Uses Navy Plastic **33 Light Blue

**18 Taupe

Uses Black Plastic Lift Latch Lap Only Ret. Lap Uses Black Plastic

**19 Brown

3Pt. only - Black Plastic Parts Ret. Lap Uses Tan Plastic

**07 Red

Uses Black Plastic

Ret. Lap Uses Black Plastic

Ret. Lap Uses Navy Plastic

**30 Light Turquoise

Uses Black Plastic

**40 Navy

**32 Medium Blue

Note - Colors may vary from printed samples

Ret. Lap Uses Maroon Plastic

**50 Dark Green

**10 Red Wine

Special Order Colors

Uses Black Plastic **23 Hot Pink S.O.

Uses Black Plastic

**25 Lime Green S.O.

Uses Black Plastic

**28 Orange S.O.

Uses Navy Plastic **15 Cobalt Blue S.O.

Uses Black Plastic

**75 Yellow S.O.

**16 Teal S.O.

**31 White S.O.

**12 Orchid S.O.

**35 Light Tan S.O.

Uses Gray Plastic Ret. Lap Uses Tan Plastic **37 Silver S.O.

Uses Black Plastic

**45 Med. Neutral S.O.

Uses Black Plastic

**13 Violet S.O.

Uses Tan Plastic

** When ordering add color number to part number

4

Uses Black Plastic

Uses Black Plastic

Uses Black Plastic

Uses Charcoal Plastic **60 Smoke S.O.

**14 Royal Purple S.O.

Uses Black Plastic **52 Military Green S.O.

S.O. An S.O. after color number indicates Special Order Color

shop 24/7 @ www.julianos.com

ADDITIONAL seat belt INFORMATION Now mandatory in most states, seat belts are a must. Whether you are building a custom street rod, replacing the belts in your current vehicle, or retrofitting your industrial equipment, seat belts should be a safety priority. Juliano’s knowledgeable team can assist you in all facets of your selection. With most items in stock and fast shipping, Juliano’s is the professional solution for your replacement seat belt and safety belt needs.

We sell only seat belts that have been thoroughly tested to meet or exceed all applicable Federal Motor Vehicle Safety Standards (FMVSS).

All of our seat belts are made by US companies using the highest quality foreign and domestic materials. This allows us to provide you with a special order seat belt that ships to you after a 3 day production time.

Because special order seat belts cannot be returned, we help you get it right the first time. To eliminate the guesswork, we mail color swatches upon your request. (See page 4 for available colors)

01 Black

03 Gray

04 Charcoal

05 Tan

07 Red

11 Maroon

18 Taupe

All of our seat belts use one of 9 colors (shown) for plastic parts

See page 4 for seat belt webbing and plastic color combinations Visit our website www.julianos.com for illustrated “How-To” articles

30 Lt. Turquoise

order toll free 1•800•300•1932

32 Medium Blue

40 Navy

5

Adjustable lap BELTS ** When ordering add color number to part number

Plastic Push Button Lap Belt

The push button lap belts are our most popular design and are an easy way to meet the mandatory seat belt laws that most states now have. These belts have new car OEM styling and quality and our wide range of colors will compliment any color interior. Each lap belt is available in 60”or 74”. Mount using our seat belt anchor plates, and dress up floor plates with our seat belt bolt covers.

60” Tan #05 Shown

JU0601** 60"

$19.95/person

JU0101** 74"

$19.95/person 60" total length

20”

40’ 74” total length 31”

60” Copper #24 Shown

43”

Starburst Lap Belt

What’s old is new again! The retro styling of our latest line of seat belts brings back the 60’s and 70’s with its starburst push button and satin metal buckle. These belts have new car OEM styling and quality and our wide range of colors will compliment any color interior. Each lap belt is available in 60”or 74”. Mount using our seat belt anchor plates, and dress up floor plates with our seat belt bolt covers.

JUS601** 60”

$24.95/person

JUS741** 74”

$24.95/person 60" total length

20”

40’ 74” total length 31”

43”

GM Metal Push Button Lap Belt Reminiscent of the muscle car era, our aftermarket GM metal push button lap belt is the perfect replacement for a worn out original GM lap belt. Black and silver GM logo in a satin finished metal buckle gives that OEM appearance without the OEM price.

JUM601** 60” GM metal lap belt

$39.95/per person

JUM741** 74” GM metal lap belt

$39.95/per person

74” Berry #08 Shown 60" total length 20”

Adjustable Lap Belts on pages 6-7 use this Juliano’s Safety Anchor Plate mounting kit JU010600

6

$15.00 per belt

40’ 74” total length 31”

43”

Custom lengths available on all Lap Belts by special order

shop 24/7 @ www.julianos.com

See page 4 for larger color images and complete ordering information

Adjustable LAP BELTS

An S.O. after color number indicates Special Order Color

**01 Black

Chrome“Lift-Latch” Lap Belt

These 60s style, chrome latch seat belts dress up the interior of any car. OEM quality webbing and latch. Our wide range of colors will compliment any color interior. Popular choice for hot rods and classic cars. Mount using our seat belt anchor plates sold on page 6 & 13.

JU060L** 60” Chrome Lift latch belts

$29.95/person

JU0LL1** 74” Chrome Lift latch belts

$29.95/person

31”

Bowtie Lift-Latch Lap Belt

JUB601** 60” Bowtie “Lift latch” belts

$44.95/person

JUB741** 74” Bowtie “Lift latch” belts

$44.95/person 60" total length

**11 Maroon **12 Orchid S.O. **13 Violet S.O. **14 Royal Purple S.O. **15 Cobalt Blue S.O. **16 Teal S.O.

40’

60” Light Turquoise #30 Shown

**08 Berry **10 Red Wine

Classic lift latch Bowtie logo aftermarket seat belt provides OEM appearance without the OEM price tag. Durable powder coated buckle lid is color matched on popular colors (or black is used) and features Chevy’s iconic satin aluminum Bowtie logo. Mounts to stock locations or use our anchor plates sold on page 6 & 13.

74” total length 31”

**05 Tan Lift Latch only

43”

20”

**04 Charcoal

**07 Red

40’ 74” total length

60” Red #07 Shown

**03 Gray

**06 Blue

60" total length 20”

**02 Ivory

**18 Taupe

43”

**19 Brown

GM Plastic Push Button Lap Belt

Molded plastic cover features push button release with blue and silver GM logo. Covers are color matched on this aftermarket belt on popular colors (or black is used).

Mounts to stock locations or use our anchor plates sold on page 6 & 13.

JUP601** 60” Plastic Push Button belts

$44.95/person

JUP741** 74” Plastic Push Button belts

$44.95/person 60" total length

20”

74” total length 31”

**24 Copper **25 Lime Green S.O. **26 Lear Blue

Lift Latch only Lift Latch only

**28 Orange S.O.

**30 Lt. Turquoise

40’

60” Med. Blue #32 Shown

**23 Hot Pink S.O.

**31 White S.O.

43”

**32 Medium Blue

Gray #03 Shown

Stiff Arm lap belt uses this Juliano’s Safety Anchor Plate mounting kit JU010800 $20.00 per belt

Starburst Stiff Arm Lap Belt

**33 Light Blue

Works well when you don’t have room for a retractable lap belt.

The 13” rigid arm keeps the seat belt from falling out the door and chipping the rocker or running board. The adjustable inboard side is 61” long and adjusts to fit. Plastic sleeve colors are noted on page 4. Mount using our anchor plate kit that includes an “L” bracket to stand up the rigid arm (JU010800).

JUSNR1** 74” Starburst Stiff Arm Lap Belt $29.95/person

13”

61”

order toll free 1•800•300•1932

74”total length

**35 Light Tan S.O. **37 Silver S.O. **40 Navy **45 Med. Neutral S.O. **50 Dark Green **52 Military Grn S.O. **60 Smoke S.O. **75 Yellow S.O.

7

retractable Lap Belts ** When ordering add color number to part number

Retractable lap belts These factory style, OEM quality, floor mounted retractable seat belts stay out of the way when not in use. Choose from the standard 13” retractor for taller seats or the 7.25” mini for low profile seats. Please note that 3” of space between the seat and the door is required to mount them using our specially designed anchor kits (JU010700 for bucket seats) or (JU010800 for bench seats) sold separately at the right.

JU0102** Bucket style

$39.95/person

JU0162** Bench style

$39.95/person

JU0102**S Mini bucket style

$39.95/person

JU0162**S Mini bench style

$39.95/person

13"

Retractable lap belt with Chrome Lift Latch • • • •

Automatic locking Retractor 9.5" Tall x 3.5 wide x 2.5 deep 72” Fully extended 20” Adjustable buckle side $59.95/person

JU0LL2**

Seat belt anchor plate kit for retractable with Chrome Lift Latch JU010800

2-1/2"

3-3/4" 13" (mini 7-1/4")

Retractable hard arm Bucket seat style

Starburst retractable lap belts • • • • •

Automatic locking Retractor 9.5” Tall x 3.5 wide x 2.5 deep 72” Fully extended 13” Rigid arm for bucket seat 20” Buckle side for bench seat

JUS102** Bucket

$59.95/person

Retractable soft armBench seat style

JUS162** Bench

$59.95/person

Mini Retractor available for Bench or Bucket seat styles

Seat belt anchor plate kit for retractable bucket seats.

8

**01 Black Retractable Seat Belts and Minis in Bucket or Bench Style Available only in these 6 colors (red uses black plastics).

**03 Gray

JU010700

$25.00/belt

**06 Blue **07 Red **11 Maroon **18 Taupe

Seat belt anchor plate kit for retractable bench seats JU010800

$20.00/belt

shop 24/7 @ www.julianos.com

$20.00/belt

See page 4 for larger color images and complete ordering information

GM retractable Lap Belts

An S.O. after color number indicates Special Order Color

GM Plastic Push Button retractable lap belt

**01 Black

• Automatic locking Retractor • 9.5” Tall x 3.5 wide x 2.5 deep • 72” Fully extended

**03 Gray

JUP162**

**02 Ivory

**04 Charcoal **05 Tan

$84.95/person

**06 Blue

Lift Latch only

**07 Red **08 Berry **10 Red Wine **11 Maroon **12 Orchid S.O.

Bowtie Lift-Latch retractable lap belt • Automatic locking Retractor • 9.5” Tall x 3.5 wide x 2.5 deep • 72” Fully extended

GM Metal Push Button retractable lap belts for Bucket seat

$84.95/person

JUB162**

**14 Royal Purple S.O. **15 Cobalt Blue S.O. **16 Teal S.O. **18 Taupe **19 Brown **23 Hot Pink S.O. **24 Copper

• Automatic locking Retractor • 9.5” Tall x 3.5 wide x 2.5 deep • 72” Fully extended • 13” Rigid arm for bucket seat JUM102**

**13 Violet S.O.

**25 Lime Green S.O. **26 Lear Blue

Lift Latch only

$79.95/person

**28 Orange S.O. **30 Lt. Turquoise **31 White S.O.

GM Metal Push Button retractable lap belts for Bench seat • • • •

**32 Medium Blue **33 Light Blue **35 Light Tan S.O.

Automatic locking Retractor 9.5” Tall x 3.5 wide x 2.5 deep 72” Fully extended 20” Buckle side for bench seat

**37 Silver S.O. **40 Navy **45 Med. Neutral S.O.

$79.95/person

JUM162**

**50 Dark Green

Seat belt anchor plate kit for retractable bucket seats.

JU010700

$25.00/belt

Seat belt anchor plate kit for retractable bench seats JU010800

order toll free 1•800•300•1932

$20.00/belt

**52 Military Grn S.O. **60 Smoke S.O. **75 Yellow S.O.

9

3-point retractable Shoulder harness ** When ordering add color number to part number

Push Button for Bench Seats has 20” soft arm

If you’re in the habit of using the shoulder harness in your everyday car or truck, you should in your street rod too! These aftermarket shoulder harnesses meet OEM safety standards with OEM style and operation and include installation kit with anchor plates and hardware.

Push Button 3-Point Retractable Shoulder Harness Chrome lift latch 3-Point Retractable Shoulder Harness • • • •

Emergency locking Retractor Retractor size: 3-3/4” H X 3-3/4” W X 2-3/4” D. Adjustable buckle Includes all mounting hardware

JU0LL3**

• Emergency locking Retractor • Retractor size: 3-3/4” H X 3-3/4” W X 2-3/4” D. • Includes all mounting hardware JU0103** Bucket seat (13” hard arm)

$99.95/person

JU0163** Bench seat (20” soft arm)

$99.95/person 3-3/4”

13”

$119.95/person

3-3/4”

Starburst 3-Point Retractable Shoulder Harness What’s old is new again! The retro styling of our latest line of seat belts brings back the 60’s and 70’s with its starburst push button and satin metal buckle.

Starburst for Bench Seats has 20” soft arm

10

140” total length 2-3/4”

• Emergency locking Retractor • Retractor size: 3-3/4” H X 3-3/4” W X 2-3/4” D. • Includes all mounting hardware JUS103** Bucket seats

$119.95/person

JUS163** Bench seats

$119.95/person

Starburst for Bucket Seats has 13” hard arm

shop 24/7 @ www.julianos.com

See page 4 for larger color images and complete ordering information

GM 3-POINT retractable Shoulder Harness

An S.O. after color number indicates Special Order Color

GM 3-Point Metal Retractable Shoulder Harness

**01 Black **02 Ivory

• Emergency locking Retractor • Retractor size: 3-3/4” H X 3-3/4” W X 2-3/4” D. • Includes all mounting hardware

**03 Gray **04 Charcoal

JUM103** Bucket seat (13” hard arm) $139.95/person **05 Tan

JUM163** Bench seat (20” soft arm) $139.95/person

**07 Red **08 Berry

GM 3-Point Bowtie Lift-Latch Retractable Shoulder Harness

**10 Red Wine

JUB163**

**15 Cobalt Blue S.O.

• • • •

**11 Maroon **12 Orchid S.O.

Emergency locking Retractor Retractor size: 3-3/4” H X 3-3/4” W X 2-3/4” D. **13 Violet S.O. 25” Adjustable Buckle Includes all mounting hardware **14 Royal Purple S.O. $144.95/person

**16 Teal S.O. **18 Taupe **19 Brown **23 Hot Pink S.O. **24 Copper **25 Lime Green S.O. **28 Orange S.O. **30 Lt. Turquoise **31 White S.O. **32 Medium Blue **33 Light Blue **35 Light Tan S.O. **37 Silver S.O. **40 Navy **45 Med. Neutral S.O.

GM 3-Point Plastic Retractable Shoulder Harness • • • •

**50 Dark Green **52 Military Grn S.O.

**60 Smoke S.O. Emergency locking Retractor Retractor size: 3-3/4” H X 3-3/4” W X 2-3/4” D. **75 Yellow S.O. 25” Adjustable Buckle Includes all mounting hardware

JUP163**

$144.95/person

order toll free 1•800•300•1932

11

3-point non-retractable Seat belts ** When ordering add color number to part number

3-Point Non-Retractable Seat Belts are available in the colors shown below. All other colors are available by Special Order (SO).

See page 4.

3-Point Non-Retractable Seat Belts • Great for back seat applications when using a child’s booster seat • Includes all mounting hardware

Push button 3-point non-retractable 106" Total length (14" buckle side)

$79.95/person

JU0203** Push Button

**01 Black

JU0303** Lift-Latch

**03 Gray

$89.95/person

Chrome lift latch 3-point non-retractable

**05 Tan **07 Red

115" Total length (22" buckle side)

**08 Berry **11 Maroon **19 Brown *31 White **40 Navy

Seat Belt Accessories Webbing guide bezel

Great for trimming a hidden retractable seat belt installation.

Split bezel slips around the belt and snaps in place. $10.00 ea.

JUOWGB

Seat Belt Bolt Covers

Seat belt stop button • Replacement for broken existing tongue stopper.

• Keeps the tongue from falling to the floor.

• Male/Female locks in place when installed on seat belt webbing. $7.00 pr.

JUSTPB01

Clip On Seat Belt Retractors

Keep it neat with these handy clip on retractors. Rolls up belts to keep them from falling out when you open the door.

Great for rear seats, too.

JU010400 Black retractor

$20.00 pr.

JU010401 Chrome retractor $39.95 pr.

Seat belt buckle sleeve • 12” replacement buckle sleeve • Available colors: 01, 03, 04, 05, 07, 08, 11, 18, 30, 32, 40.

See page 4 for colors.

JU0SL1**

$10.00 ea.

JU010801 Black

$15.00 pr.

JU010803 Gray

$15.00 pr.

JU010804 Charcoal

$15.00 pr.

JU010833 Lt Blue

$15.00 pr.

JU010811 Maroon

$15.00 pr.

JU010842 Saddle

$15.00 pr.

The Extender

Webbing by the foot

The extender adds 12 inches of overall length to the shoulder harness while retaining use of the original buckle and tongue. Installation hardware is included. Meets Federal Motor Vehicle Safety Standards (FMVSS) #209 & 302.

Available colors: 01, 03, 04, 05

• 7 panel webbing • 2 inches wide • Available in most colors (see page 4)

A universal seat belt extender available for most cars, trucks, vans and RVs

JUEXT**

12

Snaps on to seat belt floor bracket and hides anchor bolt. Available in matching colors or can be painted.

$19.95 ea.

JU010** $2.50/ft.

shop 24/7 @ www.julianos.com

Seat Belt Hardware Kits

PRESS

Juliano’s Seat Belt Safety Anchor Plates

Use factory seat belt mounting locations and hardware whenever possible DIAGRAM NO. 2

DIAGRAM NO. 1

7/16 x 1-1/2” Grade 8 Bolt Grade 8 Washer

NOT RECOMMENDED

JULIANO’S RECOMMENDS Our OEM style safety anchor plate reinforces DIAGRAM NO. 3 floor - bolt can’t pull through

When using large washer, bolt and nut and can tear through the floor

Seat Belt End Fitting

Punch 1/2” hole in Carpet Drill 1/2” hole in Floor Anchor Plate with Welded on Nut (bottom)

The Juliano’s Safety Anchor Plate has a specially rounded form designed to gather and reinforce the sheetmetal floor instead of tearing through it.

This design also makes the Safety Anchor Plates ideal for reinforcing seat mounts too. Specifically engineered threaded steel plates come complete with bolts and washers. A version with angle brackets is also available for retractable belts.

Anchor plate measures 2-3/8” x 4-1/2”.

1. Move seat to its rearmost position.

2. Insert end fitting through the seat between the backrest and cushion and use tape to mark a location behind the seat on the floor where, when installed, the webbing will be positioned at approximately a 70o angle.

Diagram No. 2 3. Space the end fittings so they are a minimum of 15” and a maximum of 25” apart.

4. Inspect under the car for any weakened or rusted areas and repair as needed. Plan your placement to avoid exhaust system, brake and fuel lines.

5. Use a 1/2” hollow punch (gasket punch) to cut through carpet and padding.

6. Use a 1/2” drill bit to drill through floor.

7. Paint or coat anchor plates as desired, first masking off threads.

8. Install per Diagram No. 1 9. Make sure anchor plate is secured against the bottom of the floor and that the bolt engages all of the threads in the nut welded on the bottom of the anchor plate.

Diagram No. 3

Juliano’s seat belt anchor plate kit for lap belts.* JU010600 $15.00 “B” pillar bracket. Direct-fit shoulder Grade 8 bolt, 7/16 fine thread JU010950 $8.00 bracket with bolt for 66-73 GM cars. shoulder bolt.

Juliano’s seat belt anchor plate kit for 2 point retractable with bench seats.* JU010800

$20.00

“L” bracket.

No weld B-pillar bracket for 35-48 Ford

• Fits 35-48 Ford. May fit other makes and JU010960 $20.00 JU010100 $6.00 models • No welding required • Solid steel, slides up Grade 8, 7/16 fine into B-pillar and screws in place thread bolt with • Includes Grade 8 locking nut. shoulder bolts and instructions.* JU010300 $1.50

JU010500 $5.00

JU010955 B-pillar bracket $20.00

*Order one kit per person on these kits

Juliano’s seat belt anchor plate kit for 2 point retractable with bucket seats.* JU010700

$25.00

Juliano’s seat belt anchor plate kit for 3 point with bench seats.* JU010250

$35.00

Juliano’s seat belt anchor plate kit for 3 point with bucket seats.* JU010200

order toll free 1•800•300•1932

$35.00

13

Direct Fit seat belts

For more information go to our website: www.julianos.com or www.seatbeltstore.com

Need to upgrade your factory installed seat belts?

Original Equipment Style (OES) Replacement seat belts:

• • • •

No drilling/welding True bolt-in installation using your existing hardware Factory looking buckles and logos Color matched webbing in 3 and 4 panel designs

Aftermarket Replacement (AR) seat belts:

• May require non-stock bracket to allow bolt-in installation • Convenient way to upgrade from lap belts to 3-point shoulder belts • Affordable choice with a huge color selection 68-72 Chevelle

General Motors Buick All Models 1964-75

1968-72 Chevelle front seat non-locking retractors

67-69 Camaro

Grand National, GNX, Regal 1982-88 Chevrolet Camaro 1967-02 Caprice, Chevelle 1964-75 Corvette 1956-96 El Camino 1964-87

Mopar A Body

Ford Bronco 1968-86

Barracuda 1964-69

Ford Truck 1947-87

Dart 1964-74

Mustang 1964-93

Demon 1971-72

Mustang Convertible

Duster 1970-74

1983-93

Valiant 1964-74

Jeep

1967-69 Camaro front seat non-locking retractors

Impala 1964-75

B Body

Malibu 1982-88

Belvedere 1964-74

Wrangler 1971-06

Monte Carlo 1964-75

Charger 1966-74

Wagoneer 1968-91

Nova 1963-75

Coronet 1965-74

68-87 Chevy Truck

Oldsmobile

Daytona 1969

All Models 1964-75

Fury 1964

Cutlass 1964-75,

GTX 1967-72

1982-88

Polara 1964

Pontiac

Road Runner 1968-74

1968-87 3-point retractable for bench or bucket

All Models 1964-75

Satellite 1968-74

Bonneville

Savoy 1964

1964-75, 1982-88

Sport Fury 1964

68-73 Mustang

Firebird ,

Super Bee 1968-71

Trans Am 1967-02

Super Bird 1970

Grand Prix 1964-75, 1982-88

1968-73 3-point retractable for bucket seats, hardware included

14

GTO, LeMans 1964-75

E Body

Cherokee 1984-96

3 Panel

4 Panel

Barracuda 1970-74 Challenger 1970-74

Chevy Truck 1967-87 Check our web site for more makes & models

shop 24/7 @ www.julianos.com

7 Panel

Direct Fit seat belt colors

Note: Colors may vary from printed samples

3 panel colors Corvette Direct Fit Belts Black 3P

Flame Red 3P

Saddle 3P

Tobacco 3P

Red 3P

Maroon 3P

Med. Saddle 3P Nassau Blue 3P

Med. Blue 3P

Navy 3P

Red 4P

Saddle 4P

Navy 4P

37 Silver

03 Gray

04 Charcoal

Mil. Green 3P

Silver 3P

Firethorn Red 3P

Frost Blue 4P

Lt. Turquoise 4P

Mil. Green 4P

02 Ivory

05 Tan

35 Lt. Tan

18 Taupe

12 Orchid

13 Violet

14 Royal Purple

52 Mil. Green

50 Dark Green

4 panel colors

Black 4P

Flame Red 4P

Silver 4P

7 panel colors

01 Black

31 White

24 Copper

19 Brown

07 Red

08 Berry

10 Red Wine

32 Med. Blue

15 Cobalt Blue

40 Navy

16 Teal

33 Lt. Blue

11 Maroon

30 Lt. Turquoise

25 Lime Green

All Direct Fit seat belts are made to order. Call for more information.

28 Orange

75 Yellow

order toll free 1•800•300•1932

15

traditional steering wheels

'35 Banjo

'37 Banjo shown with painted grip adds $150.00

'36 Banjo

$650.00 $650.00

Color detailing available

$650.00

Round Tie Bar

Round Tie Bar

Square Tie Bar

No adapters needed! Each wheel is custom built with one of three center hubs which bolt directly to GM, ididit, Flaming River, etc. (including telescopic!) or original '32-'40 steering columns, Mullins roadster and Juliano columns.

'39 Banjo for GM columns

'40 DELUXE Banjo with simulated woodgrain grip adds $200.00

'39 Banjo for 32-39 columns

$650.00

$650.00

Square Tie Bar

Juliano’s Banjo Steering wheels are $650.00 ready to paint or add $150 for painted or $200 for woodgrained.

'40 Standard Banjo

Tech-2

• No bulky adaptor needed • All are 15" in diameter.

• All have functional horn buttons.

• '35-40 Banjo style wheels have a polished aluminum hub and horn button, stainless spokes and tie bars. Comfortable black polycarbonate grip is injection molded over a stainless steel core and must be painted.

• Tech wheels are machined from a solid block of aluminum. They are epoxy primered and must be painted.

$650.00

Square Tie Bar

Juliano’s steering wheels and columns are individually handcrafted in our Ellington, CT facility to your specifications. Call our knowledgeable sales staff today to help you customize a steering wheel and column for your ride!

Hubs are designed for original style columns...

Tech-3

...or GM, ididit and Flaming River style columns. $650.00

$850.00

$850.00

Juliano’s ‘40 Classic and Tech wheels are ready for paint. Paint or woodgrain extra.

Includes your choice of horn buttons!

Large horn buttons fit ‘36, ‘37 and ‘39

16

Small horn buttons fit ‘35, ‘40, Classic, Tech II and Tech III shop 24/7 @ www.julianos.com

steering wheels & Accessories 40 Style Steering Wheel Molded gloss black plastic reproduction of 40 Ford steering wheel • Gloss black grip can be used as is or painted • Polished trim • Includes plain black horn button • 15” wheel fits GM style columns • 17” wheel fits stock 40 Ford column JU40FD15 15” GM style wheel

$279.00

JU40FD17 17” Stock reproduction wheel

$269.00

15” Dia.

17” Dia.

3-series steering wheels

3-Series wheels feature a comfortable 15” polycarbonate “finger” grip that comes paintable for you to match your interior or we can paint or woodgrain one for you at an additional charge. The 3 bolt wheel is a direct fit on our new Roadster column or works on most columns with a Grant adapter.

The 6 bolt wheel is a direct fit on most original GM Corvette columns or uses our 6 bolt billet adapter to fit GM style columns.

Call our helpful sales staff to customize yours today.

Paintable 3-Series wheels start at

$200.00

Finished 3-Series wheels start at

$350.00

3-S Birdseye Maple

3-H Paintable

2.5” Dish

1.5” Dish

9-Bolt Woodgrained Steering Wheel

Steering Wheel Woodgrain Colors Black

• 15” diameter polycarbonate woodgrained grip Colors • Aluminum frame are for • Walnut finish reference only • 1-1/4” Dish • Use with 9-Bolt Burlwood accessories

9-S Walnut

Parchment

Colonial White

Classic Red

Palomino

Carbon Fiber

Burgundy

Oak

Walnut

JU9BSAW 9-Bolt Walnut/Aluminum $400.00 Birdseye Maple

9-Bolt Accessories

Tilt &Telescopic adapter, includes choice of horn button JU021298 Satin $175.00 JU021299 Polished $185.00

Use‑any of these accessories to adapt your Juliano’s 9-bolt wheel to any 67-94 GM style column.

Juliano’s Hurricane 9-Bolt horn button JU022998 Satin $70.00 JU022999 Polished $75.00

6-Bolt Accessories

Classic 9-Bolt horn button JU022598 Satin $70.00 JU022599 Polished $75.00

Brazilian Burlwood Cherry GM NonTelescoping adapter JU021099 Polished $45.00 Smooth 9-Bolt horn button JU022798 Satin $70.00 JU022799 Polished $75.00

Rosewood Smooth Mini 9-Bolt horn button JU022898 Satin

$50.00 JU022899 Polished $60.00 Juliano’s V8 9-Bolt horn button JU024099 $80.00 JU025099 Fits original ’39 Ford $125.00

Use‑any of these accessories to adapt your Juliano’s 6-bolt wheel to any 67-94 GM style column.

Juliano’s 6 bolt GM adapter JU020098 Satin

$65.00 JU020099 Polished

$70.00

Juliano’s 6 bolt GM Tilt &Telescopic adapter includes horn button JU020298 Satin $175.00 JU020299 Polished $185.00

Wheel Woodgrain Colors order toll freeSteering 1•800•300•1932

Juliano’s 6-bolt billet horn button JU022098 Satin

$65.00 JU022099 Polished

$70.00

17

Juliano’s Classic columns We have artfully combined the classic styling of the '40 Ford steering column with modern manufacturing techniques and designed the ultimate column for traditional hot rods. Each is hand crafted from aluminum alloy to look original in every way. All dimensions are exactly like the original.

• The '40 column is available with an authentic looking column shift with reproduction shift knob and detents compatible with most three and four speed automatics. The shift linkage lever can be indexed to any position for easy linkage hook-up.

• A smooth version without the column shift is also available for floor shifts.

Juliano’s Satin Finish ‘39 Classic column

Juliano’s Roadster Column

No adapter needed! Looks great with Juliano’s 3-bolt wheels • • • •

1.5” diameter with 3/4” DD Polished or satin finish aluminum Standard lengths are 32” and 35” Call for optional horn wire or custom lengths

JUC32NH8 Roadster column 32” Satin

$300.00

JUC32NH9 Roadster column 32” Polished

$450.00

JUC35NH8 Roadster column 35” Satin

$300.00

JUC35NH9 Roadster column 35” Polished

$450.00

Juliano’s '39 Classic column

Juliano’s '37 Banjo wheel & Juliano’s '40 Classic column

• Any of the new Juliano’s wheels mount directly to these columns for an exceptionally clean look. No adapters! You may also mount an original '40 steering wheel or GM compatible wheel without the need of an adapter.

• Standard column length is 35". We will also custom build to any length. Columns are measured from the end of the column to the top of the bell. Do not include the splined steering shaft in the measurement. Shafts accept a 3/4" DD U-joint.

• All columns are wired for horns.

• Special column drops and floor mounts are also available.

• Like the original, these authentic columns do not have built in turn signals, but a chromed '50s accessory unit would sure complete the look!

Juliano’s '40 Classic column Satin w/o column shift

$400.00

Fully polished

$550.00

Juliano’s ‘39 Classic columns Juliano’s '40 Classic column without shift

18

• '39 Classic column has a tapered keyway to fit 32-39 Ford and Juliano’s 36-39 steering wheels. Looks cool on 32-39 Fords • '39 version is for floor shift only.

No horn: Satin

$300.00

Wired for horn: Satin

$400.00 Fully polished

Fully polished

Steering wheels not included with columns

shop 24/7 @ www.julianos.com

$450.00 $550.00

Juliano’s '40 Classic column with column shift

• • • •

(automatic transmission only)

Shift detents compatible with most 3 & 4 speed automatic transmissions Compatible with all Juliano’s steering wheels or any 69-94 GM adaptor Spring loaded internal shift mechanism combined with a fulcrum point allows for easy shifting Built to your specs with a paintable finish

Juliano’s ‘40 Classic column with shift paintable

$650.00

Cable Shift Linkage for 1.5” Column

• Kit includes cable and brackets • Connects shifter to transmission with cable LACA1806 1.5” Column Shift Linkage $169.95

Juliano’s “Classic” drops and floor mounts are the perfect way to mount our “Classic” series steering columns.

Juliano’s Easy Angle Classic Floor Mount

Juliano’s Classic Column Drop • • • •

Fits 1.5” diameter columns Split for easy installation Retro hot rod styling Measure from center of column to top of drop

• Fits 1.5” diameter columns • Split and pinned for easy installation • Round outer ring or Slimline for clearance

JUCF15** JUCFS15**

Classic floor mount round Classic floor mount slimline

(Add suffix below) **18 Satin no shift

$69.95

JUCD25** 2.5” drop

**19 Polished no shift

$79.95

JUCD35** 3.5” drop

**28 Satin with shift

$69.95

JUCD45** 4.5” drop

**29 Polished with shift

$79.95

JUCD55** 5.5” drop (Add suffix below) **18 Satin no shift

$79.95

**19 Polished no shift

$94.95

**28 Satin with shift

$79.95

**29 Polished with shift

$94.95

order toll free 1•800•300•1932

19

Columns & Accessories ididit and Flaming River Steering Columns and Accessories

Juliano’s offers a full line of ididit and Flaming River steering columns and accessories. These columns are great values and are easy to mount. All new components include 5 position tilt, self cancelling turn signals, four way flashers and standard dress up kit. Available in a variety of lengths and finishes including paintable steel, chrome or aluminum. Complete your installation with everything you’ll need including U-joints and steering shafts all at competitive prices.

Tilt Floor Shift Columns start at

$385.00

Tilt Column Shift Columns start at

$585.00

Machined Aluminum Floor Trim Plates Trims and seals holes in floor and carpet or steering column and clutch/brake pedals.

Machined aluminum plates with rubber seals. Column trim plate splits with vertical alignment pins so it can be installed without removing column. Round brake/clutch trim also fits dimmer switch.

ididit tilt column shift column

SWB02S Brake trim oval

$19.95

SWB01S Brake trim round

$19.95

SWB03 Column trim

$39.00

ididit tilt floor shift column

Flaming River tilt floor shift column

Style A for standard and tilt columns

Flaming River column shift ignition key column

Single U-joint

Flaming River column shift column

Style B for telescoping columns

Column Dress Up Kit Billet aluminum knobs with levers replace factory GM turn signal, tilt and 4 way flasher.

BLT26120 Polished-Style A

$33.95

BLT36120 Polished-Style B

$33.95

Double U-joint

U-joint with vibration damper

Column Shift Knob Billet aluminum knob replaces factory GM shift knob. Locks on stock lever with set screw.

U-joints and steering shafts BLT26220 Polished

20

shop 24/7 @ www.julianos.com

$18.95

Satin or polished finish Made in USA

Easy-Angle Column Drop

Adjustable angle

Juliano’s machined billet aluminum column drop uses the same ball joint principle as our floor mount. It allows for almost any angle between the column, dash and floor for easy mounting. It also splits for assembly on the column and is available in three drop sizes.

Machined aluminum ball joint

Seals out air, fumes and water

3.5" drop

Locks in place

Easy-Angle Floor Mount Solidly mounting and sealing a late model steering column to the floor of an early car or truck has always been a problem. JULIANO’S exclusive EASY-ANGLE COLUMN MOUNT makes it simple. The airtight machined billet ball joint allows for misalignments of almost 18 degrees over a 30" column. Easy-Angle is split so that it can be mounted on either side of the floor. And it looks great too!

Fits 1-3/4, 2, 2-1/4" and 2-3/8" columns (with gasket). 4-1/2" outside diameter.

JU08009* 1-3/4" column JU08029* 2-1/4" column JU08019* 2" column JU08039* 2-3/8" column * add (8) to the above numbers to specify satin $69.95 * add (9) to the above numbers to specify polished $79.95

Exploded view of floor mount

JU09159* 1-1/2" column JU09009* 1-3/4" column JU09039* 2" column JU09069* 2-1/4" column JU09099* 2-3/8" column

4.5" drop

JU09169* 1-1/2" column JU09019* 1-3/4" column JU09049* 2" column JU09079* 2-1/4" column JU09109* 2-3/8" column

5.5" drop JU09179* 1-1/2" column JU09029* 1-3/4" column JU09059* 2" column JU09089* 2-1/4" column JU09119* 2-3/8" column * add (8) to the above numbers to specify satin $79.95 * add (9) to the above numbers to specify polished $94.95

Floor plate 5-1/2"

Steering column

3-1/2"

4-1/2"

Ball joint

Slim-Line Easy-Angle Floor Mount Same adjustable ball joint features as the floor mount above but with flat sides for more clearance around clutch and brake pedals. Polished or satin finish.

4-1/2" x 3-1/4".

Adjustable angle locks in place

JU08049* 1-3/4" column JU08069* 2-1/4" column JU08059* 2" column JU08079* 2-3/8" column * add (8) to the above numbers to specify satin * add (9) to the above numbers to specify polished

$69.95 $79.95

order toll free 1•800•300•1932

21

“R ear S ight ®”

Back-up camera System

NHTSA has mandated back up cameras to be required in all new cars and light trucks by 2018

Drivers today are more safety conscious than ever and anyone who drives a street rod or custom vehicle would benefit from Juliano’s RearSight backup camera system.

Installations

Common uses

Camera placement should be as close to the center line as possible in the rearmost position

Two channels allow for use of 2 cameras with 1 monitor

Kit #3 in 1934 Ford coupe: • 5” monitor mounted under the dash • Flush mount bullet camera mounted in rear tail pan

Kit #5 in 1932 Ford coupe: • 3-1/2” monitor mounted on the header panel • License plate bracket camera

• Check on load inside trailer • Check on child in car seat • Backing into parking spot • Hitching trailer

Juliano’s “RearSight” Back-up Camera System Kits Starting at $210 To eliminate the guesswork, we’ve assembled several kits that will work in most street rod and custom car applications.

Or check out our website for more camera and monitor options to meet your specific needs.

KIT #1

KIT #5

JURS5MONW . . . . . . . $ 210

JURS3MONL . . . . . . . . $ 285

5” Monitor with wedge/ stud camera

3.5” Monitor with license plate bracket camera

KIT #2

KIT #6

JURS5MONL . . . . . . . $ 225

JURS3MONB . . . . . . . . $ 295

5” Monitor with license plate bracket camera

3.5” Monitor with flush mount bullet camera

KIT #3

KIT #7

4.3” Mirror/Monitor with license plate bracket camera

JURS4MIRL . . . . . . . . $ 290

KIT #8

4.3” Mirror/Monitor with multi-mount tab camera

JURS4MIRT . . . . . . . . $ 300

5” Monitor with flush mount bullet camera

JURS5MONB . . . . . . . $ 235

KIT #4

5” Monitor with multimount tab camera

JURS5MONT . . . . . . . $ 235

Cameras License plate bracket camera • RCA video connections • Fits modern license plates Flush mount bullet camera • Standard S-video connections • Bullet style design for flush mounting Multi-mount tab camera • Standard S-video connections • Tab mount pre-installed • Includes swivel hinge mount

22

Wedge/Stud camera • RCA videoconnections • Stud mounted • Angle up or down

MONITORS 5” LCD Monitor

Common Features

• 1/4” CMOS color cameras • 160 Degree peripheral view • .5 Lux light sensitivity • Overlaid parking grid lines* • Waterproof case with anti-fog lens • 3 Year warranty • 30 ft. Plug-n-Play wiring harness * Gridline patterns may vary

3.5” LCD Monitor

4.3” LCD Mirror/Monitor

shop 24/7 @ www.julianos.com

5” LCD Monitor • Dual inputs • Adjustable swivel mount pedestal • Built in speakers • 6.125”W x 4.5”H x 1.125”D 3.5” LCD Monitor • Dual inputs • Adjustable swivel mount • Flexible mounting pad • 3.75”W x 3.5”H x 8.75”D 4.3” LCD Mirror/Monitor • Anti-Glare coated glass • 16:9 Aspect ratio • Screen hidden until activaterd • 10.75”W x 3.25”H x 1.75”D • 2-1/2” Swivel stem • Cleat & glue included

Accessories

Kit includes your choice of engagement switches

FORD - 250-3021 1983 and earlier

UNIVERSAL “CUT OFF” 250-3032 installs over existing turn signal lever after original knob has been cut off

GENERAL MOTORS and JEEP - 250-3020 - GM and AMC 1981 and earlier. Jeep and Chrysler w/ Saginaw column

250-3091 - Black 84-93 without pulse wiper 250-3592 Dash mount lighted

Rostra Electronic Cruise Control • Includes your choice of engagement switches • Speed pulse generator • 3 year warranty $295.00

JU2501223 Ultra cruise control

Juliano’s is pleased to carry a full line of top quality Lokar products including: • Shifters and accessories • Indicators and Boots • Column shift linkage • E-Brakes and cables • Throttle cables and kickdowns • Gas pedals and brake pads

Billet oval tail light

Billet oval gauge panel

Call us or check out our web site for more Lokar Products and pricing

Shifter knobs

Nostalgia shifter

Spoon gas pedal

Shifter boots Billet rectangular boot with indicator

order toll free 1•800•300•1932

23

P O W E R

Juliano’s Posi-Glide II is the best power window system you can buy! Here’s why...

W I N D O W S

. . . Designed for street rods, 50s and 60s cars, trucks, mini-trucks and specialty cars Juliano’s has engineered the smoothest, quietest, most compact power window system available. The Posi-Glide™ widetrack design stabilizes the glass and eliminates any possibility of window rocking, chatter or misalignment.

Wide base track That’s especially important for cars and trucks with nylon guides— no binding or rocking with one piece side glass with little vertical area like a chopped three window coupe.

The OEM quality stainless steel screw drive system quietly raises and lowers the glass up to 18" and the extra slim motor fits in doors only 2" deep.

FiveYear Warranty Powerful OEM motor with stainless steel gear drive and drive cable

Posi-glide channel for bind-free operation Large base window channel bracket has two wide-track nylon guides that ride up and down on a heavy gauge steel track.

The window cannot rock or bind.

Free floating nylon guides Window channel bracket

Stainless steel cable and gear drive High torque OEM style mounts

Shielded cable Lubed for life Powerful OEM motor is mounted on a flexible shielded cable. This makes it easier to locate and mount the drive motor in the door.

Each kit includes: • 2 OEM Quality regulators and motors are covered by a five year warranty • Heavy gauge window channels with large regulator bracket eliminates flex and window chatter • Wiring harness and OEM style switches and plugs.

Juliano’s wiring harnesses are color coded and each wire is labeled • All parts are zinc chromated • All nuts, bolts and hardware • Glass setting tape • Illustrated instructions JU030202 Power window kit

$350.00

JU030300 Crossover wiring harness

$25.00

JU030500 Jumbo door checks

$39.95 pr.

New-Relics Power Windows • Model Specific • Directly bolts into original mounting holes • Delco OEM motors • Includes choice of GM chrome or black illuminated switches with wire harness and conduit • Made in USA

24

• Fits most: 37-72 Chevy Cars, 56-82 Corvettes, 28-67 Ford cars, 55-64 T-Birds, 64-70 Mustangs, 40-74 Mopar cars, 28-79 Ford Trucks, 36-87 Chevy Trucks • Many models available for Buick, Cadillac & Olds 2-Window Kit

Call for pricing

4-Window Kit

Call for pricing

shop 24/7 @ www.julianos.com

2-1/2"w x 3"h 1-1/2"w x 3"h

Switches and Plates High quality OEM style power window switch snaps into black surface mount single or dual faceplate.

JUEUB-51 Single Switch Plate

Now with 10 functions

JUEUB-53 Dual Switch Plate

$4.00 ea. $6.00 ea.

JU030900 Power Window Switch $12.00 ea.

Commander 10k Remote Control for Power windows and Door Locks • Raise and lower power windows • Release and raise trunk/rear hatch • Turn on/off any electrical device • Ignition safety disables door and trunk release when engine is running • Sealed emergency switch included • Lifetime warranty Kit includes receiver, 2 six button transmitters, completely assembled harness with relays and comprehensive wiring instructions.

JUCMD10K Commander 10K 10 Function remote

2-1/4"w x 2-5/8"h

$199.95

Bear Claw Door Latches Replace your car’s antique, unsafe worn out door latches and striker plates with these two position Bear Claw latches.

These latches are the same design as used on new cars. Operated with either a remote handle or power actuator.

3-1/2"

1-1/2" Made in USA

5/8"

JUDL300 Med. bear claws $55.00 pr.

Bear Claw Latch Installation Plates Pre-stamped, 14 GA. steel fit medium Bear Claw latches. Includes cage nut striker plates (not shown) JU033600 Med plate

$50.00 pr.

2-3/4"w x 2-5/8"h

2-1/4"w x 2-5/8"h

Billet Switch Plates Plates mount single or double switches as well as cover crank holes in door panels. Includes hardware. $35.00 pr.

BA5006GS Switch Plates Inc. 2 single switch plates

$35.00 pr.

BA5007GD Switch Plates

Inc.1 single switch plate and 1 dual switch plate

Jumbo Door Checks Hollow stainless steel door checks hide wiring for power windows, power locks electric doors, speakers etc.

5/8" x 1/4" opening

Set of 4

JU030500 Door checks

$39.95 pr.

JU030600 Door check brackets

$19.95 set

order toll free 1•800•300•1932

25

interior accessories Vent Window Eliminating Kit Doing away with the factory vent window gives your car a much cleaner look and does away with a source of wind whistles and water leaks. These window channels and brackets replace the forward vertical window channel that is lost when the vent window is removed. These brackets supplement our power window kits.

Wire Looms for suicide doors

$50.00 pr.

JU032700 Vent Eliminating Kit

Braided Stainless Wire Looms Easy way to run wires through door jams • High quality 1/2” OD • Teflon lined • Allows up to eight 14 Ga. wires to pass.

JU94201 Wire looms braided

$60.00 pr.

JU94202 Wire looms for suicide doors

$80.00 pr.

Oval Rear View Mirror

Top mount Garnish mount

7” Rear View Mirrors

• Polished stainless steel • Measures 5-3/4” x 2-7/8” • Top mount for closed cars • Garnish mount for convertibles and cabriolets JUHR1768 Oval mirror/top mount

$65.00 ea.

JUHR1769 Oval mirror/garnish mount

$65.00 ea.

Suction cup mount

Signal Finder Prism mounts to the garnish molding or dash. Makes it easier to see traffic signals in chopped cars.

JUA18300

26

Smooth contour Glue-on mount includes rear view mirror adhesive BA2016 $84.00

Deluxe signal site with magnetic base

$15.00

Deluxe Signal Site features chrome plated die cast body with swivel arm. Threads into vintage styled, chrome plated, super strong, magnetic base that holds firmly to any metal dash.

JUA51697 Signal site

$28.00

Smooth contour Top mount features early Ford bolt pattern BA2015 $84.00

shop 24/7 @ www.julianos.com

interior accessories Marque arm rest with backing plate

Standard arm rest with opener and backing plate

Banjoluxe window crank

Royaluxe window crank

Deluxe window crank

Deluxe door handle

Banjoluxe door handle

Royaluxe door handle

Deluxe vent window crank

Banjoluxe vent window crank Royaluxe vent window crank

16-1/4" long x 4-1/2" high x 2-1/8" deep Standard armrest

Door and Window Handles

Adapters included

Adapters included to fit early and late GM and Ford shafts. $58.00 pr.

BA4044DLX Deluxe door handle

Billet Armrests These beautiful and functional armrests compliment any interior.

Each style comes with a ready to upholster wooden pad. Standard style w/door openers must be used with backing plate. The Marque billet aluminum armrest features a brushed satin finish with black delrin inlays. The Marque billet aluminum armrest also comes with the option of a courtesy light and a push button door opener.

BA4045DLX Deluxe window crank

$58.00 pr.

BA4046DLX Deluxe vent window crank

$58.00 pr.

BA4047RLX Royaluxe door handle

$63.00 pr.

BA4048RLX Royaluxe window crank

$63.00 pr.

BA4049RLX Royaluxe vent window crank

$63.00 pr.

BA4531BLX Banjoluxe door handle

$79.00 pr.

$122.00 pr.

BA4532BLX Banjoluxe window crank

$79.00 pr.

BA5002 Standard armrest with door opener

$184.00 pr.

BA4533BLX Banjoluxe vent window crank

$79.00 pr.

BA5020 Marque armrest -no light or door opener

$173.00 pr.

BA5028 Marque armrest -with light and no opener

$199.00 pr.

BA5021 Marque armrest -with light & door opener

$226.00 pr.

BA5001 Standard armrest

BA5003NS Backing plate -no switch

$47.00 pr.

BA5022NS Marque backing plate -no switch

$47.00 pr.

Throttle pedal assembly

Small brake pedal 3” 2” 4”

1-1/2”

Top mount mirror

Dimmer switch 1-1/4” Glue on mirror Top mount mirror with map light

2”

Large brake pedal

Billet Pedals Throttle pedal assembly Machined from billet aluminum with or without rubber insert.

Designed for comfort and style with spring loaded pad. Compatible with most throttle cables (not included).

Billet Rear View Mirror Stylish mirrors in both top mount and glue on styles in two sizes, standard and mini. All mirrors are built using high quality stainless pivots guaranteed to hold position.

The standard size mirror is also available with built in map light. A small halogen light is recessed into the bottom of the mirror body.

It can be operated by a door switch and/or separate switch.

BA1001 Throttle assembly all billet

$94.00

BA1001R Throttle assembly with rubber pad

$94.00

Billet brake pedal and dimmer switch cover Mounts with 1/2” stud and jamb nut.

BA1002 Small brake pedal all billet

$29.00

BA2011S Standard glue on

(5-1/4" long)

$52.00

BA1002R Small brake pedal with rubber pad

$29.00

BA2010S Standard top mount

(5-1/4" long)

$58.00

BA1004 Large brake pedal all billet

$34.00

BA2011M Mini glue on

(4" long)

$52.00

BA1004R Large brake pedal with rubber pad

$34.00

BA2010M Mini top mount

(4" long)

$58.00

BA1003 Dimmer switch all billet

$15.00

BA2010SL Mirror with map light

(5-1/4" long)

$79.00

BA1003R Dimmer switch with rubber pad

$15.00

order toll free 1•800•300•1932

27

Interior Lights

Billet Aluminum Courtesy Light Deluxe Dual Dome Light • • • • • •

Round LED Dome Light

OA Dimensions: 8”x 3.5 x 1.46” 12 Volts 1” backspace Separate push switches in lens 3 way switches for up to two power inputs Mounts flush in panel.

• 12 Volts • 1/2” backspace • OA Dimensions: 5” diameter JUHR509 LED dome light

$65.00

JU301006 Dlx dual dome light-gray $30.00 JU501006 Dlx dual dome light-tan $30.00

Deluxe Single Dome Light 12 Volts 1” backspace OA Dimensions: 4.25” x 3.5 x1.46” Separate push switches in lens 3 way switches for up to two power inputs Mounts flush in panel.

JU101005 Dlx single dome -black $25.00 JU301005 Dlx single dome -gray $25.00 JU501005 Dlx single dome -tan

$25.00

OA Dimensions: 3-5/8” x 1-1/4” x 1-1/16” 12 Volts 1” backspace Mirror polished billet bezel Use in door panel, console, headliner, etc.

BLT60220 Red/white lens

$37.00

BLT60120 White/white lens

$37.00

Clear Oval Courtesy Light

JU101006 Dlx dual dome light-black $30.00

• • • • • •

• • • • •

• 12 Volts • 1.75” backspace • OA Dimensions: 1.89” x 1.4 x 2.12” • Lamp socket and wires include rubber pass through grommet and shroud for interior or exterior use • Closed cell foam base gasket • Locking ears snap into round hole

Adjustable Angle Courtesy Light • • • • •

JU201010 Clear oval courtesy light $20.00

OA Dimensions: 4" x 1-3/4”x 1-1/4" 12 Volts 1” backspace Use with or without mounting bezel Rocker lens is 3-way switch

JUEU7180

$15.00 ea.

Door Jam Switch • Rubber boot • Straight blades • 3.3 LBS spring load JUEUS206 Door jam switch

Mini Round Spot Light

Dual Overhead Light • • • • •

12 Volts 1/2” backspace OA Dimensions: 6-1/4” x 3-5/8 x 1-1/8” Individual side switches Cover plate hides mounting screws

JU101008 Light-black

$25.00

JU501008 Light-tan

$25.00

28

$10.00

Under Dash Lights Complete 12 Volt kit with two quality door switches, lamps, brackets, wire and connectors and hardware.

SWL04 Under dash light kit

$40.00

• 12 Volts • 1-1/4” backspace • OA Dimensions: without bezel 1-1/2” deep and 1-3/4” diameter.

• Lens swivels 360o JUEU1288 Spot Light

shop 24/7 @ www.julianos.com

$15.00 ea.

Accessories

3rd brake light and lighted

Hood Props • Telescoping satin finish aluminum tubes support hoods or deck lids • Two sizes: 16 to 30" and 21 to 36".

Lighted

JU00MHH30 16 to 30" Hood Prop small

$24.95

JU00MHH36 21 to 36" Hood Prop large

$24.95

Hot Rod License Plate Frame

Plain

Chrome plated steel. Includes all mounting hardware.

JUHRCPLT Hot Rod license plate frame

Billet License Plate Frames

2-1/4"

14-1/4"

A great detail item and functional too! These billet license frames are recessed on the back and come with stainless hardware.

BLT55120 Plain frame polished

$32.00 ea.

BLT55220 Lighted polished

$56.00 ea.

BLT55520 Lighted polished w/3rd

$20.00 ea.

5" 2-1/4"

$75.00 ea.

3-15/16" 4-1/2"

Juliano’s Windshield Slides

Visors with Billet Bracket & Vanity Mirror Ready to upholster visors come with machined aluminum brackets and stainless steel hardware.* Threaded to accept billet vanity mirror/registration holder.

• Redesigned to compensate for '28-32 Fords with chopped tops • Machined aluminum • Allows you to fully close and lock windshield JU070000 Windshield slides

$39.95 pr.

BA6001 Visor

$84.00 pr.

BA6002 Registration holder

$24.00 ea.

BA6003 Vanity mirror *Medallion size: Early Ford bolt pattern 1-1/2” on center.

$24.00 ea.

order toll free 1•800•300•1932

29

power accessories

Power Cowl Vent

Brake Light Switch

The only power cowl vent on the market with a reversing motor which creates a positive seal every time. Powerful, compact motor with bracket makes it easy to keep your cowl vent functional and eliminates the under dash handle.

Weatherproof switch can be mounted under the floor. Includes screws and terminals. $22.00

SWL08 Brake switch

Power Actuator for Door and Trunk Latches Powerful electric motor and gear drive mechanism is strong enough to operate door and trunk latches and locks. Small design makes it easy to mount in narrow doors. Works well with bear claw latches.

JU032300 Power actuator

$35.00 ea.

Manual Battery Cut-Off Mount in battery cable to shut down entire system. Use as safety measure or for security.

JU036100 Manual battery cut-off $24.00

30

JUDCCV Power cowl vent

$174.95

Suicide Door Safety Latch Kit

Auxiliary Battery Power Posts

They don’t call them suicide doors for nothing! If the door is ajar or pops open at speed, the wind will get under the front edge of the door and rip it right off the car and maybe you with it! This safety latch kit locks the door shut. Turn the knob and a pin engages a socket in the door jamb. Micro switches can be wired to an indicator light or ignition interlock.

Complete kit with wiring and knobs.

Install in a convenient location to provide an accessible place to charge battery or attach jumper cables. Especially useful if battery is in the trunk or under the floor.

JUSL300 Suicide door latch kit

JU036300 Power post set

$69.95

In-Car Antenna Non-directional antenna can be mounted anywhere inside a fiberglass vehicle or near windshield for best AM/FM reception in steel cars. 12 volt.

JUANT1000 In-car antenna

$69.95

shop 24/7 @ www.julianos.com

$38.00

WIPERS & Horns Complete Electric Wiper Motor System A complete windshield wiper system package designed to replace single or individual vacuum wiper motors with a linkage driven system powering two 32 Ford 3-window shown wiper blades with one electric motor. The package includes a drill fixture to locate the passenger side wiper transmission. Each system is designed for a specific year or model of vehicle. Chopped tops require special parts. Starting at $369.00. Call for more information.

Available for: 28-29 Ford Model A 30-31 Ford Model A

32 Ford 3-window 37-38 Ford Passenger car 26-27 Model T Truck

32-34 Ford Truck 40-47 Ford Truck 39-46 Chevy Truck

Electric Wiper Motor Conversions

These conversion kits are an easy way to convert original vacuum wipers to powerful, safe electric wipers. Each kit has custom brackets designed to bolt in and use the original linkage. Comes with 2 speed rotary switch. $220.00

All wiper kits

Big Al’s Billet Wipers Hi tech style adapts to early cars and trucks with 10/32”, 1/4" and 1/2"shaft. Also available with adjustable blade angle. Straight blades are 7" long can be trimmed to length. Choose either 5-1/2” or 6-1/2" arm length.

Optional - NE1001D Wiper delay

$81.00

Optional - Switch shaft extension

$21.00

Chevrolet Cars

Ford & Mercury Cars

NE3536CP 35 Chevy Mast,

NE3739CAB 37-39 Ford

36 Chevy

Cabriolet, Woody, Convert

NE3738CP

37-38 Chevy

NE3900FP

39 Ford Dlx

NE3900CP

39 Chevy

NE4000FP

40 Ford

BA3101 5-1/2” Arm, 1/4” & 10-32 Shaft, 7” Adjustable angle flat blade $61.00 ea.

NE4000CP

40 Chevy

NE4100FP

41 Ford

NE4100CP

41 Chevy

NE4647FP

42-47 Ford

BA3102 5-1/2” Arm, 1/2” Shaft, 7” Adjustable angle flat blade $61.00 ea.

NE4800CP

42-48 Chevy

NE4800FP

47-48 Ford

NE4952CP

49-52 Chevy

NE4950FP

49-50 Ford

BA3201 6-1/2” Arm, 1/4” & 10-32 Shaft, 7” Adjustable angle flat blade $61.00 ea.

NE535457CP 53,54/57Chevy

BA3202 6-1/2” Arm, 1/2” Shaft, 7” Adjustable angle flat blade $61.00 ea.

Smooth style billet wiper arms with adjustable blade angle. Arm length can be adapted to many cars. Wiper arm can be telescoped into shaft to provide a custom length that will fit your vehicle.

10” adjustable angle flat blade can be trimmed for chopped cars.

BA3322 1/2" shaft

BA3321 1/4" + 10/32” shaft

$68.00 ea. $68.00 ea.

55-56 Chevy

NE5800CP

58 Chevy

JU30102 Chrome/black horn

$35.00 pr.

JUAL105 Red/black horn

$32.00 pr.

51 Ford

NE5254FM

52-54 Ford

NE4850FT

48-50 Ford

NE5556FM

55-56 Ford

NE5152FT

51-52 Ford

NE5700FP

57 Ford

53-55 Ford

NE5800FP

58 Ford

NE4753CT

47-53 Chevy

NE5900FP

59 Ford

NE5455CT

54-55 Chevy

NE6061FM

60-61 Ford

NE5557CT

55-57 Chevy

NE5557TB

55-57 T-Bird

58-59 Chevy

NE58-60TB

58-60 T-Bird

48-52 Dodge

NE3940MP

39-40 Merc

NE5354DT 53-54 Dodge

NE4100FP

41 Merc

NE5056INT

50-56 Intern’l

NE4647FP

42-47 Merc

49-53 Stude

NE4800FP

47-48 Merc

NE4900MP

49 Merc

NE5000MP

50 Merc

NE5355FT

Powerful twin blast sound. OEM replacement quality complete with hardware and instructions.

Available in red with black or chrome with black.

• 12 Volt • 10 Amps • 128 decibels

49-50 Ford woody NE5100FP

NE5100WDY 51 Ford Woody

Trucks

Horns

Big Al’s Super Adjustable Wipers

NE5556CP

NE4950WDY

NE5859CT NE4852DT

NE4953STD

NE4664WLS 46-64 Willys

NE5100MP 51 Merc

Kits also available for: Anglia, Buick, Cadillac, Desoto, Dodge, Edsel, Hudson, Kaiser, Lincoln, Nash, Oldsmobile, Packard, Pontiac, Prefect, Studebaker

order toll free 1•800•300•1932

31

Third Brake Lights

Juliano’s LED Split Window 3rd Brake Light with Turn Signals Designed for cars with split rear windows, this satin finish billet aluminum light goes one step beyond all others.

• Adjustable swivel bracket that compensates for window angle and mounting to garnish molding screw • Machined from billet aluminum with satin finish • 6 12V Hi-intensity LED lights per side • Can be used as a 3rd brake light or wired to work with turn signals

Juliano’s LED 3rd Brake Light Same great brake and with Turn Signals

turn signal features as our split window 3rd brake light, but unit 3/4" mounts to package tray or garnish molding 1" inside window.

8"

$69.95

JU018100 LED 3rd brake light with turn signal

Standard 3rd Brake Light

JU018200 Split window 3rd brake light with turn signal $89.95 8" 3/4"

Satin finish billet aluminum. LED makes it super bright.

7" 3/4"

Mounting bracket hides wires

1-1/4" $50.00

JU018600 Standard 3rd brake light

LED 3rd Brake Light Stylish black plastic with bright LEDs. Adjustable pedestal.

9-3/4"

Adjustable bracket compensates for window angle

3/4" 1-1/2" JU018001 3rd brake light-black

$30.00

Magnetic Rear Reflectors

by Juliano’s Our '32 with Magnaflectors

One of those neat ideas that makes you wonder why didn’t I think of that?! These flexible magnetic strips use the same material as the reflectors on tractor trailers and they stick to anything metal. They make the rear of your car much more visible whether you have your lights on or not. Follow a truck at night and see what we’re talking about. Peel off at the show and reinstall for the drive home. Won’t hurt your paint.

MAGNA Rear Reflectors

32

$19.95 per package of 4

Our '32 without Magnaflectors

shop 24/7 @ www.julianos.com

OEM style LED 3rd Brake Lights These extra bright third brake lights are OEM designs like the ones mounted in the edge of the rear spoilers on some new cars. Depending on the design, they can be mounted flush or on the surface.

$25.00

JU08 1" D x 1⁄2" H x 9-1⁄2" L JU01-B 3⁄4" D x 7⁄16" H x 33" L

$65.00 SAE/DOT LED $45.00

JU20 1-1/4" D x 1" H x 10-1/4" L JU10 1-1⁄4" D x 9⁄16" H x 17" L

$35.00

JU15 1-1⁄8" D x 3⁄4" H x 15-3⁄4" L

$35.00

JU04 1-1⁄2"D x 11⁄16" H x 17-1⁄4" L $45.00

SAE/DOT 40 LED $50.00

JU21 1-1/4" D x 1/2" H x 14" L

JU06 15⁄16" D x 1⁄2" H x 15-1⁄2" L $45.00

JU07 1" D x 1⁄2" H x 10" L

$25.00

SAE/DOT 28 LED

20 LEDS

JU19 1-1/4" D x 1-1/4" H x 12" L

$50.00

$25.00

JU20708R 3/4”D x 3/4" H x 8" L

BrakeLighter

Mini LED Lights Easy way to add extra safety. Adhesive backing mounts anywhere. Hi-Intensity Red or Amber LEDs. 3/4" H x 4-3/4" L JU018002 RED JU018016 AMBER

Removable LED third brake light with turn signals designed for classic cars.

• Easily mounts on window with suction cups or adhesive pads • 12 or 6 volt, positive or negative ground • Optional mounting bracket for slanted rear window • 12”‑long x 5/8” high x 7/8” deep JU018012 Brakelighter 12v

$59.95

JU018006 Brakelighter 6v

$59.95

JU018007 Slant glass bracket kit

$13.00

JU018008 Split window bracket kit $16.00

Teeny LED Lights Easy way to add extra safety. Adhesive backing mounts anywhere. Hi-Intensity Red or Amber LEDs. 3/4" H x 2-1⁄4" L

$20.00 ea.

JU20707R RED

$12.00 ea.

$20.00 ea.

JU70707A AMBER

$12.00 ea.

L.E.D. Light Bar

BRAKE LIGHT MODE

Three function (running, turn and brake) LED light bar • 15-1/2” L x 1-5/8” H x 7/8” D • Includes 11 bright LEDs • Easy 4 wire hook-up, installation instructions included JU20350R LED light bar

LEFT TURN SIGNAL MODE

RUNNING LIGHT MODE

$67.00 ea.

order toll free 1•800•300•1932

33

LED Tail Lights / Plug-n-play Passenger Vehicles

Retrofit Your Tail Lights with these LED Conversation Kits • • • • • • •

•

12 Volt SAE/DOT compliant Low voltage Durable poly carbonate lenses Instant on Rated for 100,000 hours of operation Sealed for complete protection from moisture & corrosives Easy installation, plugs into 1156 or1157 socket • No drilling

1937 Ford 1928-1931 Ford JU28FPPL Driver side

$40.00 ea.

JU28FPPR Passenger side

$30.00 ea.

JU37FPPL Driver side

$40.00 ea.

JU37FPPR Passenger side

$30.00 ea.

3 Step Installation 1. Unscrew lens and bezel from the housing. Remove the incandescent bulb.

1938-1939 Ford JU38FPP

1157 or 1156 socket for plug in installation

1940 Ford

1932 Ford

2. Plug the LED unit into the housing.

$40.00 ea.

JU32FPPL Driver side

$40.00 ea.

JU32FPPR Passenger side

$30.00 ea.

JU40FPP

$40.00 ea.

1942-1948 Ford JU42FPP

3. Mount the bezel and installation is complete.

34

1933-1936 Ford JU33FPPL Driver side

$40.00 ea.

1941-1948 Chevy

JU33FPPR Passenger side

$30.00 ea.

JU41CPP

shop 24/7 @ www.julianos.com

$30.00 ea.

$30.00 ea.

LED Tail lights / complete with housings Passenger Vehicles • • • • •

Driver side shown

12 Volt Bright red LEDs for tail lights Brilliant white LEDs for license light Super strong polycarbonate lens High quality stainless steel housings

Trucks

1933-1936 Ford JU33FPCL Driver side

$60.00 ea.

JU33FPCR Passenger side

$50.00 ea.

1940-1953 Chevy truck $60.00 ea.

JU40CTCL Driver side

1937-1938 Chevy JU37CPCL Drivers side

$60.00 ea.

JU37CPCR Passenger side

$50.00 ea.

Driver side shown

1937 Ford JU37FPCL Driver side

$70.00 ea.

1940-1953 Chevy truck

JU37FPCR Passenger side

$60.00 ea.

JU40CTCR Passenger side

1941-1948 Chevy

$50.00 ea.

Hard Wire Installation

• Includes rubber mounting gasket JU41CPCL Drivers side

$40.00 ea.

JU41CPCR Passenger side

$40.00 ea.

Fits 1937-1938 Chevy Passenger Car and 1940-1953 Chevy Truck

Driver side shown

1928-1931 Ford

1938 - 1939 Ford

• Includes rubber mounting gasket

JU28FPCL Driver side

$60.00 ea.

JU28FPCR Passenger side

$50.00 ea.

JU38FPC

$50.00 ea.

JU37CPTL Drivers side

$40.00 ea.

JU37CPTR Passenger side $30.00 ea.

Accessories

Driver side shown

1932 Ford JU32FPCL Driver side

$60.00 ea.

JU32FPCR Passenger side

$50.00 ea.

1950 Pontiac tail light with chrome bezel • Includes rubber mounting gasket JU50PPC

$45.00 ea.

LED Flasher JUFLASH2 12V, 2 Terminal

$18.00 ea.

JUFLASH3 12V, 3 Terminal

$18.00 ea.

order toll free 1•800•300•1932

35

halogen headlight system

Aerobrite Halogen Headlight System for 1935-36 Ford. Also fits 1935-39 Ford 1/2 ton pickup Upgrade your headlights to improve your ability to see at night by converting to this 12 volt high performance halogen system.

Kit includes: • Two adapter rings • Two Hella European Hi-performance headlamps • Two new custom stainless steel bezels • Complete hardware kit • Easy to follow instructions JUAERO351 '35, ‘36 Ford car & ‘35-’39 Ford pickup

REPRODUCTION BUCKET

$339.95 pr.

HELLA HI-Performance Headlamp TRIM RING NOT INCLUDED

AEROBRITE System shown installed on Tom McCann’s 1939 Ford

FILLER PANEL WITH TURN SIGNALS ADJUSTABLE (sold separately) BRACKET

Aerobrite Halogen Headlight System for all '37, ‘38 and '39 Fords AeroBrite System 1 includes AeroBrite Lenses, Hella Bulbs, Brackets AeroBrite System 2 includes AeroBrite System 1 pre-installed in reproduction buckets with lens gaskets and fender gaskets

Note: Original restored trim rings available.

Call for pricing.

POLYCARBONATE LENS

Filler Panels with built in Turn Signals

JUAERO372 '37, '38 plus '39 Ford Std. System 2

$499.95 pr.

Molded panel neatly fills in area around headlamp. Can be painted body color or silver for a neat effect. Available with or without amber LED turn signals.

JUAERO391 '39 Ford Deluxe System 1

$339.95 pr.

JUAE37FP1

1937 Filler panel

JUAERO392 '39. Ford Deluxe System 2

$499.95 pr.

JUAE37FP2

1937 Filler panel with turn signals

$99.95 pr.

JUAE37LEN ‘37, '38 plus '39 Ford Std. Lens only

$139.95 pr.

JUAE39FP1

1939 Filler panel

$40.00 pr.

JUAE39LEN '39 Ford Deluxe Lens only

$139.95 pr.

JUAE39FP2

1939 Filler panel with turn signals

$99.95 pr.

JUAERO371 '37, '38 plus '39 Ford Std. System 1

36

$339.95 pr.

shop 24/7 @ www.julianos.com

$40.00 pr.

headlamps Hella High Performance 7” Halogen Headlamp The Hella Vision Plus is based on European technology and delivers the brightest, most powerful lighting available without increasing glare.

• 50% more powerful on low beam and 25% more powerful on high beam than standard halogen sealed beam headlamps • Features replaceable HB2 halogen bulb • DOT approved • 12 volt • Advanced optics provide even illumination with less glare • Also available in 5-3/4” diameter. Call for pricing $65.00 ea.

JUAE70477 7" halogen headlamp

9” Halogen headlamp Specifically designed for 32-34 Ford cars and trucks.

May fit other applications.

• Clear polycarbonate lens with fluted reflector • Easily change from Hi-Performance halogen bulb back to original lens in minutes for shows • Replaceable 12V #9007 halogen bulb • 3 prong pigtail • Includes new spring clips • 12 volt. DOT approved $135.00 ea.

JUH9007 9" Halogen 32 Ford JUH9008 9" Halogen 33-34 Ford

$135.00 ea.

Park/turn guide lights fit 1935-1936 Ford cars These vintage style dual function lights (parking lights and turn signals) combine modern 12 volt LED technology with old time styling. Clear lens lights amber when in use.

Highly polished stainless‑steel housings can be used as is or can be painted to match your headlight buckets.

Easily installs on original Ford buckets. Kit includes: • Two dual function stainless lights • Mounting hardware • Easy to follow instructions $70.00 pr.

JUPL35100 Park/turn guide lights

Park/turn/ running lights fit 1940 Ford Deluxe & Standard and 1940-1941 Ford Commercial This 3-wire set-up introduces the latest in LED technology. Along with parking lights and turn signals, you have the option of adding daytime running lights for added safety. This intensely bright 12 volt light is pulse width modulated.

Install using your original glass lens.

Made in USA. JUPL40200 Park/turn/running lights $114.95 pr.

40 Ford LED Turn Signal Light and Parking Light • 21 Super bright amber LEDs, complete with polycarbonate lens • Epoxy coated, fully sealed electronics • Includes 3 mounting clips JUPL40100 1940 LED turn signal & parking light $60.00 pr.

order toll free 1•800•300•1932

37

Sound Deadener & INSULATION cowl and firewall

Juliano’s O.E.M. Butyl Sound Deadener rear quarter Keep it quiet!

inside doors floor and transmission tunnel

We’ve got the solution! Juliano’s O.E.M. Butyl Sound Deadener is a thin, waterproof and very dense material used to reduce vibrations and dampen road noise in the interior of your vehicle. You’ll be amazed at the solid sound when closing your doors, quieter highway sounds and optimum performance of your stereo system!

Self adhesive!

Easily cut to fit with a sharp utility knife using the handy grid pattern on the foil facing as a guide. Then peel off backing film and apply this self-adhesive product to your vehicle’s interior over a clean, smooth surface.

Notice!

Juliano’s O.E.M. Butyl Sound Deadener 70 Mil. thick • Foil faced • Self adhesive • 9 sheets, 21” X 29”each - Total 38 sq. ft.

JU040038 Butyl Sound Deadener 38 sq. ft

$145.00/box

Finish your soundproofing with Jute underlay and Juliano’s Insul-Tek

For the best adhesion on vertical and overhead surfaces, surface must be clean and painted and additional contact adhesive should be used.

Juliano’s Insul-Tek The best foil insulation on the market ... ask for it by name!

Use for floor, firewall, door panels and under headliner.

Can be used with our OEM sound deadening material for optimum performance.

• 1/4” thick core of closed cell insulation with aluminum foil bonded to both sides.

• R value of 3 • 4 x 10’ = 40 sq. ft.

• Will not absorb moisture • Reduces noise level • Insulates against heat and cold • Flame retardant • Installs with contact adhesive to any clean dry surface • 10 ft. Foil tape JU040200 Insul-Tek

38

Carpet Underlay Our 36” wide jute underlay is the same high quality found under top quality new car carpets.

Available in a 5 yard roll, it provides sound deadening and heat insulation. $45.00/40 sq. ft

JU200400

shop 24/7 @ www.julianos.com

$40.00/5 yard roll

Juliano’s TOP KIT Juliano’s Top Kits Installing a top insert is one of the few jobs that the home builder has been afraid to tackle.

Juliano’s do-it-yourself top insert kit is easy to do and gives professional results with common shop tools.

Top Kit includes:

• Canvas base cloth • 1/2" foam padding material • Black waterproof vinyl top material • Aluminum track • Snap-on finish molding (1/4” high x 1/2” wide) • Optional Haartz cloth material • Complete instructions JU000101 Coupe Top Kit-black vinyl

$199.95

JU000201 Sedan Top Kit-black vinyl

$229.95

JU000102 Coupe Top Kit-black Haartz cloth

$259.95

JU000202 Sedan Top Kit-black Haartz cloth

$325.95

JU000600 Rivets pkg. of 500

$16.00

JU000800 Instructional DVD

$8.00

Vinyl Top Material 1/2" Foam Padding Canvas Base Cloth

Coupe kit fits max opening 40” x 50” Sedan kit fits max opening 72” x 50” Call to inquire about oversize kits

Snap-on finish molding

Aluminum Track

Aluminum rivets, 1/8” diameter, 1/8”- 3/16” Grip range

Add that look of elegance to your car with a soft top insert made of black Haartz cloth for the utmost in Woven acrylic fabric styling and durability.

Waterproof PVC backing

Optional Haartz cloth This Juliano Top Kit was installed on this 3-window coupe by original owner Brian Fredericks in 1981 and still looks like new.

order toll free 1•800•300•1932

39

ACCESSORIES

1/4" BEAD

Juliano’s Color Keyed Fender Welt

1-1/4" FLAP

Juliano’s manufactures fender welt from high quality naugahyde in nine stock colors. Made up in 30 foot rolls, this welting is very flexible to go around tight corners and will not rot or mildew.

Stock color fender welt

$35.00 per 30 foot roll

JU010001 black JU010006 dark blue JU010008 dark red JU010009 GM red JU010010 Porsche red JU010011 maroon JU010013 white JU010014 lt. yellow JU010017 orange

Special Order Colors

Street Rod Hood Lace

Our standard colors will match most popular colors, but we will also custom make fender welt to match your paint sample from over 200 available colors in 9 foot lengths (minimum order of 36 feet).

Modern rubber composition replaces the old woven cotton material. Won’t tear, mark or rot and looks a lot cleaner too. Each kit includes small stainless steel truss head trim screws to secure molding in place.

JU010000 Custom fender welt

RS5834 7 feet of 5/8" for radiator shell and

9 feet of 3/4" for cowl

$40.00 kit

RS5878 7 feet of 5/8" for radiator shell and

9 feet of 7/8" for cowl

$40.00 kit

$3.50 per foot

Bug Screens Fiberglass, mounting hardware included, hand washable.

Car Covers These plastic “car bags” are perfect temporary covers for your car. Completely waterproof, these covers are affordable short term protection from the elements at rod runs. Also protects non-waterproof car covers. The bag stows easily and is a must for roadster owners!

JU300100 Car Cover

40

$10.00

JU001000 32 Ford

$39.95

JU001100 33 Ford

$39.95

JU001200 34 Ford

$39.95

JU001300 35 Ford

$39.95

JU001500 36 Ford

$39.95

JU001600 37 Ford

$39.95

JU001700 37 Ford truck

$39.95

JU001900 33 Plymouth

$39.95

shop 24/7 @ www.julianos.com

Juliano’s PRO-CLAMP Pro-Clamp Stainless Steel Exhaust Coupling

PRO-CLAMP Flange is welded to your muffler or pipe

PRO-CLAMP Flare is welded to your pipe

PRO-CLAMP Locking Nut

Owner Supplied Exhaust Pipe

Check out Juliano’s revolutionary new idea to cleanly connect exhaust pipes, making it super easy to make changes to your exhaust system while adding that overthe-top professional look to the undercarriage of your ride.

Carefully align and tack fittings in place. Be careful not to overheat parts. Test fit before finish welding. Do not overheat the parts as excessive heat may cause warpage.

Apply anti-seize to the male threads and tighten the nut with a spanner wrench.

Apply anti-seize to set screw in the face of the nut and tighten to lock nut in place.

Juliano’s Pro-Clamp installations on customer cars

Three piece system includes: • • • • • •

One male 37.5 deg. flare (butt welds to exhaust tubing or muffler) One female 37.5 deg. flare (butt welds to exhaust tubing or muffler) One locking nut (secures and seals) Made of 304 stainless steel • Will not leak • No gasket required No crimping required • Easily removed and re-installed Uses standard spanner wrench • Recommend Permatex copper silicone

JUPRO2000 2”

$100.00

JUPRO2500 2.5”

$100.00

JUPRO3000 3”

$120.00

JUSPAN Spanner wrench 2” and 2-1/2”

$12.00

JUSPAN3 Spanner wrench 3”

$18.00

JU101BR Permatex Copper JU325R 3” x 2-1/2” reducer

order toll free 1•800•300•1932

$8.00 $25.00

41

Custom Hydrographic Service by

Featuring woodgrain finishes of artisan quality

Woodgraining is just part of what we are able to do with hydrographics. We can apply a carbon fiber finish in a variety of patterns and tints to interior trim or even valve covers which is especially popular with the newer “street machines�.

We have also applied camouflage finishes to hunting rifles and skull collages to sporting helmets to name a few.

The possibilities are limited only to the imagination.

All work is guaranteed. For more information call: (860) 872-1932 Brazilian Burlwood

Cherry

Golden Brown

Oak

Birdseye Maple Burlwood

Distressed Walnut Rosewood

42

www.woodgrainit.com

Carbon Fiber

Walnut

32 dash in Metallic Brazilian Burlwood & Maple

Ford Mustang dash panel in Walnut

1968 Camaro dash panel in Walnut

Ford Mustang dash panel in Walnut

‘38 Ford dash in Metallic Rosewood

Garnish molding in Oak

‘36 Ford dash in Burlwood

‘51 Ford woody panel in Walnut

‘32 Ford dash in Brazilian Burlwood

‘38 Ford dash in Walnut

‘60 Ford Country Squire body side molding in Oak

www.woodgrainit.com

43

www.julianos.com

www.woodgrainit.com

www.seatbeltstore.com

To order, call: 800-300-1932 Fax orders: 860-872-4114 Tech help: 860-872-1932 www.julianos.com www.seatbeltstore.com www.woodgrainit.com 100 Windermere Ave. Ellington, CT 06029