1
2
3
4
4b
5
7
6
STEP-BY-STEP 1. Use the serrated knife to cut off the dinosaur's head just above the shoulders. Try to make a level cut.
3. Still holding the sandpaper, lightly sand the surface of the plate on the bottom and top where you'll attach the dinosaur.
2. Use sandpaper to smooth the edges of the cut piece, both head and shoulders.
4. Apply Super Glue to the cut Dino shoulders and the area of the plate you'll attach him to. Glue both pieces and let it sit (cure) for 24 hours.
68
Beginner's Project Guide by Workshop Girls
5. Once the body and plate have dried and cured, grab the dinosaur's head and attach to the plate. Make any necessary touch ups and allow to cure for another 24 hours.
7. Let it dry for a final time and once it's done, place it anywhere you like. It will definitely draw attention to itself.
6. After it's completely dry, spray paint from all angles and underneath.
03 Add Some Flare
69