Åsnes AW21 ENG 11.03.2021 by Frank Juklestad

SKIPRODUCTION BASED ON

SOON 100 YEARS OF EXPERIENCE

Photo © Jon Hunnålvatn Tøn

QUALITY, TRADITIONS AND EMPOWERMENT TO EXPLORE SINCE 1922

The history

For over 99 years, Åsnes has produced robust skis for hiking and Mountain. The story begins in 1910 when the oldest of Åsnes the brothers got a job at Hagen Skifabrikk in Christiania. There he learned the trade of ski production. Åsnes has a long and rich history that bears the mark of hard work and iron will.

Skiproduction anno 1922

The Åsnes family built the first factory in 1933 and in 1937 the brothers received their first order from the military. For the first time, they had to hire people who were not in the family. Åsnes had its absolute heyday in 1977 with over 70 employees at most. 137,000 were produced pairs of skis in the factory, and 45% of the volume was exported to the United States and Canada. The beginning of the ’80s was marked by a lot of adversity and a tough market. It did not help that Åsnes were the first to produce fiberglass skis with a full steel edge. In 1982 the number of employees was down to 40 men, but Åsnes again recovered in 1984/85 due to the growing telemark trend. Many old telemarkers probably remember both the A-ski and the Comp ski.

Producing skis is very much a craft, and still today, there are around 100 manual and hand-held processes, even though the technology has developed quite a lot.

In 1998 Brødrene Åsnes Ski AS went bankrupt and a new company was established with regional investors. Åsnes was no longer a family company. The new company was named Åsnes Ski AS and was operated until 2006. Then there were two locals at Voss who had ”a dream” and revived the brand for the future. Today, Åsnes is the market leader in its segment and produces around 25,.000 - 30.000 pairs of skis annually. Åsnes is known for high-quality skis made for rugged terrain and polar regions, as well as skin the insert and short skin system that was introduced in 2003.

No doubt, the lumber used for ski production were solid back then. On this picture, you can see Jonas Åsnes, one of the founders.

Back in the 30’s the Åsnes brothers actually hauled the timber by handpowerd boats over the fjord and to the factory, as there were no roads.

1986 The expedition following Roald Amundsens old route - Monica Kristensen Solås.

1994 Liv Arnesen - the first woman in the world to reach the South Pole, unsupported and unassisted.

1997 The first expeditions consisting of only women (22 ladies) reached the North Pole, going from Ward hunt Island, Canada.

Expeditions Åsnes is probably the ski manufacturer in the world who have had their skis on most polar expeditions from the ’80s and until today. We have supported countless expeditions to Spitsbergen, Greenland, Alaska,Canada, the South and North Poles. The skis have also been used so many times to ski the full length of Norway that it is no longer possible to hold the count. Experience and testing from expeditions and yearlong cooperation with the military have given us what we today claim are the best nordic bc skis on market.

2005 Rune Gjeldnes - the world’s longes solo-skitrek (at that time). Crossed Antartica on skis (4804km, solo in 103 days).

2010 Cecilie Skog and Ryan Waters - The first to cross the Antarctic unsupported and unassisted. From Brekner Island, to the Sout Pole and to the Ross Sea.

BACK COUNTRY

DOG FRIENDLY

CROSS COUNTRY

ALPINE TOURING

WAXLESS

SKI POLES

68 81

SHORT SKINS LONG BC SKINS

Nordic BC skis are characterized as being wider than regular cross-country skis, and they in most cases have steel edges and are manufactured with a proper wood core. Mountain skiing does not have the same camber and wax-pockets as a cross-country ski for several reasons. A mountain ski should follow the terrain a completely different way than the skis used in trampled and groomed tracks. BC skis should be possible to handle under varying conditions and snowpacks, in a completely different way than classic cross-country skis. What kind of BC ski you should choose depends on the area of use, type of terrain, skills, and distance. The weight factor is most important Ski length is first and foremost determined based on body length, weight, and skills. All our models will have a dedicated table so that it is easy to choose the correct length based on body weight and height.

Photo © Jon Hunnålvatn Tøn

Overview Nordic BC Skis

For some, regardless, the height and weight in the tables won’t necessarily correlate. This is something we are aware of and that we have an understanding of. This is how it is with almost everyone types of skis. But if you are unsure of the length you should choose, then we would recommend choosing with priority in bodyweight, to get a good grip and your skills.

Therefore, we recommend choosing a ski that’s not too stiff, but at the same time not too soft for your weight when choosing the right length. A longer ski is stiffer than a shorter ski, and the opposite. This is crucial for good grip, but at the same time to maintain the properties you need to slide forward. So as a general recommendation, we recommend checking the length-table for your chosen ski model and select the right ski length based primarily on your weight as a starting point.

A good grip is the most important priority in the mountains! Most Nordic BC skis are designed for optimal load-bearing capacity and flotation We also have information and resources in the snow through a stiffer waist-section that describe in detail the treatment of skins, and decreasing bending resistance videos, and other useful information on outwards towards tips. A camber designed Åsnes Academy; asnes.com/asnes-academy. to be a compromise between grip and glide, and a stiff section underfoot, means that you do not press the skis flat to the ground as you lead the ski forward. Thus, the friction against the pocket is almost half and you save energy and reduce mechanical wear on grip wax and the skins.

OV E R V I E W

N O R D I C

B C

S K I S

Mountain Race Jr. BC

item no. 542203

Mountain Race 48

item no. 542201

Mountain Race 48 Skin

item no. 542204

”XC-like” touring skis for groomed tracks Narrower skis that will fit into groomed tracks. Usually lighter than traditional ”mountain skis”. These skis are directional stable, stiff and will be perceived as ”fast”. They will also typically have more camber, a more prominent wax pocket and feel more like a regular XC-ski.

Nordic BC skis for long treks, and primarily flatter terrain These are skis with more stiffness in the full length of the ski, a camber and wax pocked designed for grip-wax and for effective kick and glide performance. These ski excel in flatter terrain, with their load bearing capacity and when pulling a sled on longer treks. Typically directional skis, without a a lot of sidecut. Usually chosen in longer length to glide well.

Amundsen BC

item no. 542001

Liv BC

item no. 542024

Børge Ousland BC

item no. 542027

Amundsen Fram Waxless

item no. 542028

Gamme 54 BC

item no. 542026

Finnmark 54 Waxless

item no. 542029

Finnmark 54 BC

item no. 542012

OV E R V I E W

N O R D I C

B C

S K I S

Otto Sverdrup BC

item no. 540231

Line Sverdrup BC

item no. 542007

Nansen BC

item no. 542006

Cecilie BC

item no. 542007

Ingstad BC

item no. 542008

Tonje BC

item no. 542009

Breidablikk BC

Combat NATO BC

Allround Nordic BC skis for use in the backcountry Wider skis with more sidecut, thus also more playful and easier to turn going downhill. These skis might very well be used for longer treks, but are less directional. Typically, these skis will have a more forgiving camber, less stiffness underfoot and a lower wax-pocket for ensure grip in the backcountry. These are the classic ”mountain skis” that ski well going downhill and have a good compromise between XC capabilities and good downhill performance.

item no. 542013

Nansen Waxless

item no. 542019

Ingstad Waxless

item no. 542020

Breidablikk Waxless

item no. 542017

item no. 540224

OV E R V I E W

N O R D I C

B C

S K I S

Finnmark 54 BC

item no. 542012

Finnmark 54 Waxless

Breidablikk BC

item no. 542029

Skis especially designed for those with dogs. These skis come without a steel edge to ensure the safety of our four-legged friends. Designed based on some of our best skis, we have a narrow ski designed for longer treks and that will fit in a groomed track, an all-round ”mountain ski” for BC use and a wide, stiff and more downhill oriented ski.

item no. 542013

Breidablikk Waxless

Kongsvold BC

Dogfriendly skis, without a steel edge

item no. 542017

item no. 542014

Kongsvold BC

Wider, more playfull and downhill oriented skis

Falketind 62 Xplore

These are wider Nordic BC skis, often called ”hybrids”. These skis can be considered something between a Nordic BC ski and a regular Alpine Touring ski. Fantastic skis for enthusiasts, and telemark skiers. Designed to be more playful, charge harder and to ski deeper snow in steeper and more difficult terrain. These skis might very well be a really good aption to heavier alpine touring skis. Typically, these skis do not have a proper wax pocket, but will come with a good amount of stiffness underfoot, some camber and more torsional rigidity. These skis are most suited to use with both short-skins and regular climbing skins.

OV E R V I E W

Rabb 68

N O R D I C

B C

S K I S

item no. 542014

item no. 542033

item no. 542306

Photo © Casper Fløysand

M O U N T I N G

Mounting

Sealing the screw holes is essential so as to avoid water entering the ski’s structure, damaging the moisture balance in the wood core and causing damage. If you unfasten a binding from an old ski, you will typically see brown screw holes caused by rot and rust if it has not been properly sealed. This means that the mounting was not done properly.

The basis for our recommendation Extensive testing, traditions and long experience gained from all the skis we have provided for expeditions, harsh mountain environments, and military NATO Forces prove that PU-adhesives work much better than ordinary glue made for wood. PU adhesives have been found to have on average 20% better properties related to the holding of the screws in the ski and in strength. Since PU adhesives also cure in contact with moisture, it has actually been shown that the strength and hold can be even stronger if the adhesives are lightly sprayed with water before mounting of the bindings. This can also be done with a moist cloth to be sure one does not use excessive glue and to avoid too much moisture. Most importantly, the PU adhesive has better properties than regular white wood glue to seal the screw holes, because the PU-glue expands and has a more flexible and water-resistant composition.

Photo © The Polar Academy

We empathize that all Åsnes skis should be mounted with Polyurethane (PU-glue) one-component, solventfree adhesive. Polyurethane has been developed as a universal adhesive for bonding wood to various other materials. Such as metal, plastic, rubber, and also wood against wood. PU glue cures by means of humidity, moisture in the material and materials being glued together. The glue also expands during the curing process, which makes the glue particularly suitable for sealing the pre-drilled holes in which ski bindings are mounted.

Craig Mathison, Scottish Polar Hero, and leader of The Polar Academy was trained in mounting and the use of the right glue.

Visit our website for more information: www.asnes.com/tech-info-and-mounting/

PU-LIM POLYURETHANE Anbefalt lim til montering av ski size

100 ml

300 ml

item no.

544050

544051

M O U N T I N G

Photo © Kai Otto Melau

C O U N T RY B AC K

suggested skin width 45/30 mm

Børge Ousland BC Very light and versatile mountain ski that fits in the track Børge Ousland BC is a very light and versatile ski that fits down cross country tracks. A ski with a solid steel edge (2.1x1.9 mm) and a very lightweight wooden core, which is equally suitable for long trips and expeditions with pulk, as for days in hard and icy ski tracks. Because we use same steel edge on our mountain skis as is used on most alpine skis, we can guarantee good edge control on all conditions and high-level durability. This ski has a prominent camber profile which stetches in the length of the ski and a distinctive wax pocket, something which makes for an excellent ski for trips where good glide is essential. This ski also comes with a sole that has good wax absorption, is very durable and grinded to work in Nordic conditions – perfect for long outings in Nordic and Polar snow conditions.

length width

180,190,200,210 66 52 60

weight

825 g per ski (200 cm)

steel edge skin insert sinter and waxable

material poplar/paulownia constr. cap binding BC

item no. 542027

B AC K

C O U N T RY

Ousland BC ski has a moderate side cut so that the ski is directional, but also turns easily on hard snow. A soft front tip with the Nordic Rocker (lifted tip) and Taper (secluded widest point on the tip) makes for a ski that handle difficult conditions in the mountains well and floats more easily. This ski has a light wooden core in poplar and paulownia, which gives a playful, solid ski with good camber and very low weight. Børge Ousland BC weighs only just over 800 grams per ski in 200 cm length - then there is none bordering on how long and long you can ski! The longitudinal stiffener and the construction of the Børge Ousland BC ski has good bearing capacity. This ski has been developed in close cooperation with the polar explorer, Børge Ousland, known as one of the most reputable adventures in modern polar history. Børge Ousland was the first man to reach the North Pole without supplies and support in 1990 together with Erling Kagge. In 1994 he went alone to the North Pole and on to Kapp Arkichevsky in Russia, the first in the world, and in 1996/1997 he was the first in the world to cross in and out of the South Pole without supplies, which also was the fastest entry into the South Pole in just 34 days. Since then, Børge Ousland has been at the North Pole during the winter and made several remarkable expeditions before in later years have lived of lectures, as an expedition organizer and on the island Manshausen in Steigen. We are proud to be able to work with Børge Ousland and we look forward to further cooperation and think it is great that we can benefit from his stories and advice.

suggested skin width 45/30 mm

Liv BC Perfect for rough terrain and long distances

length width weight

170,175,180,187,194 67 57 62 830 g per ski (180 cm)

steel edge skin insert sinter and waxable

material poplar woodcore constr. cap binding BC

Developed in close collaboration with Liv Arnesen, the first woman to reach the South Pole solo without support or supplies, the Liv BC ski is the perfect choice for long winter hikes with a backpack or sled in tow. With its prominent wax pocket for lasting grip, and equipped with Skinlock for the instant attachment of the short X-Skin when climbing, this ski is a superb choice for women planning expeditions or longer hikes.

item no. 542024

Although narrow enough to fit in groomed tracks, it’s designed and constructed to handle challenging conditions outside the tracks. Liv Arnesen is a veteran of many expeditions and extreme ski tours. Before her solo expedition to the South Pole, she and Julie Maske were the first women to cross the Greenland ice without support. With Ann Bancroft, she was one of the first women to cross Antarctica on skis. Liv has spent much time on Svalbard as a guide and tour leader; today, she lectures and is a sought-after speaker on the subject of motivation, mastery and management.

B AC K

C O U N T RY

suggested skin width 45 mm

Amundsen BC The perfect choice for expeditions, treks and adventure

length width weight

170,175,180,187,194,201,208 67 57 62 1010 g per ski (201 cm)

steel edge skin insert sinter and waxable

material poplar woodcore constr. cap binding BC

Amundsen BC is a ski for the long mountain trek. With a full steel edge and a prominent wax pocket for a lasting grip, it is stiff and reassuringly stable – perfect for longer excursions and expeditions with the weight of a backpack or sled. All Åsnes skis are compatible with the new X-Skin. So although the Amundsen BC is narrow enough for groomed tracks, a climbing skin can be attached in an instant when it is time for that long mountain ascent.

item no. 542001

Roald Amundsen (1872–1928), the first man to reach both the South and North Poles, was a polar explorer, discoverer, researcher and flight pioneer. He navigated the Northwest Passage and was a pioneer in the use of airships and planes in polar research.

B AC K

C O U N T RY

suggested skin width 45 mm

Otto Sverdrup BC All-round ski for use in the backcountry and varied terrain Otto Sverdrup BC is perhaps one the most versatile Nordic BC skis, for use in the backcountry, in our range. This ski has a more prominent camber and wax-pocket than most of our other all-around bc skis, good sidecut, and modern technology. The modern shape with taper and rocker tip lifts the ski easily out of the snow, meaning that the ski does not hook so easily and makes it easier to set up the turn compared to more traditional designed skis. This also means that you get a ski that handles most terrain and is experienced more playful and forgiving when conditions are demanding. Otto Sverdrup BC has a good amount of camber, and a prominent wax pocket, that makes the ski suitable for slightly longer trips, and perhaps especially in varying and hilly terrain. The effective camber and stiffness make for a ski that will be fairly XC effective, and the forgiving tips and the sidecuts also give the ski a good amount of playfulness. All in all, a very good compromise for an all-around nordic bc ski. This is simply a modern twist on a good classic mountain ski, which will suit most mountain lovers!

length width weight

175,180,185,190,195,200,205 78 55 69 1070 g per ski (200 cm)

steel edge skin insert sinter and waxable

material poplar woodcore constr. cap binding BC

If you want to get the most out of Åsnes’ short-skin system, we recommend using the right skin, either X-skin 45mm Mohair for cold conditions / moderate terrain, or X-skin 45mm Nylon for wet conditions / steep terrain. Otto Sverdrup (1854 - 1930) joined Nansen on skis over Greenland and was captain of the ship ”Fram” during the first Fram expedition. He even led the second Fram expedition in the years 1898-1902. Otto Neumann Knoph Sverdrup is considered ”one of the big three” in Norwegian polar history, next to Nansen and Amundsen. A name that has not received enough attention in the shadows of the other two. The expeditions led by Otto Sverdrup collected a huge amount of research material. This resulted in 39 dissertations from 34 researchers who participated in the processing of the material. Sverdrup’s expeditions also laid out the groundwork for maps used by Canadian authorities right up to the 1960s. Among the areas which were mapped were three islands that were named after the expedition’s sponsors. The island was later commonly noticed as Sverdrupøyene (the sverdrup islands) and is today a part of the archipelago Queen Elizabeth Islands in the Nunavut Territory. Otto Sverdrup received a long line of awards throughout his life, i.a. gold medals from Det Norwegian Geographical Society (1889), Royal Geographical Society (1903), and a number of other geographical societies, and he was an honorary member of several. He was appointed Commander of the 1st Class of the Order of St. Olav after the 1st Fram Expedition in 1896 and received the Grand Cross after the 2nd Expedition.

item no. 540231

B AC K

C O U N T RY

suggested skin width 45 mm

Line Sverdrup BC All-round ski for use in the backcountry and varied terrain Line Sverdrup BC is perhaps one the most versatile Nordic BC skis, for use in the backcountry, in our range. This ski has a more prominent camber and wax-pocket than most of our other all-around bc skis, good sidecut, and modern technology. The modern shape with taper and rocker tip lifts the ski easily out of the snow, meaning that the ski does not hook so easily and makes it easier to set up the turn compared to more traditional designed skis. This also means that you get a ski that handles most terrain and is experienced more playful and forgiving when conditions are demanding. Line Sverdrup BC has a good amount of camber, and a prominent wax pocket, that makes the ski suitable for slightly longer trips, and perhaps especially in varying and hilly terrain. The effective camber and stiffness make for a ski that will be fairly XC effective, and the forgiving tips and the sidecuts also give the ski a good amount of playfulness. All in all, a very good compromise for an all-around nordic bc ski. This is simply a modern twist on a good classic mountain ski, which will suit most mountain lovers!

length width weight

170,175,180,185 78 55 69 960 g per ski (180 cm)

steel edge skin insert sinter and waxable

material poplar woodcore constr. cap binding BC

Line Victoria Sverdrup is a city girl who has chosen to live out her outdoor dream. As a direct descendant and relative of polar explorer Otto Sverdrup (1854 -1930) Line Victoria has a heart full of adventure, love for polar dogs and Norwegian nature. As her early relative, Otto Sverdrup, Line Victoria fell in love with nature early on when she was pulled as a child the sled behind the family’s three Greenland dogs at the cabin in Valdres. And since then dogs, dog sledding, hunting, and the outdoors have been a big part of her life. For Line Victoria, the A4-life has never been particularly inviting. The career pursuit and focus you often find in the city and in the ”finer” parts of Oslo Oslo did not appeal. Line Victoria has many passions. Everything from hunting and fishing to dog sledding and hiking. In addition, she works as a freelance journalist. Line Victoria is also very concerned with nature conservation. Her goal with sharing the outdoor-life on social media is to get as many people as possible to appreciate the outdoors more, live on/of less, and experience more. She believes that the best way to get people to understand how important nature and wildlife are to the earth is to show them. We are proud to have Line Victoria in our small family here in Åsnes, and we look forward to following her further and are enthusiastic that a new generation of adventurers can spread the adventurous spirit and joy for the outdoors like Otto Sverdrup once stood for.

item no. 540232

B AC K

C O U N T RY

suggested skin width 45 mm

Gamme 54 BC Firm, light and agile, the most versatile mountain ski you can get

length width weight

170,180,190,200,210 68 54 61 1010 g per ski (200 cm)

steel edge skin insert sinter and waxable

material poplar woodcore constr. cap binding BC

item no. 542026

Firm, light and agile, the Gamme 54 is the most versatile mountain ski you can get. Its prominent wax pocket and longitudinal stiffness mark it out for long trips in hilly terrain, even with a backpack or sled in tow. Its Nordic Rocker (Early Rise) and pronounced sidecut make it sweetly responsive on the turn. Constructed around a lightweight poplar wood core, the Gamme 54 is reinforced at the tip with Titanal – an alloy reducing vibration and giving peace of mind on the most challenging outings. This ski is developed in close cooperation with the adventurer Aleksander Gamme. In the winter of 2011– 2012, Aleksander completed the world’s longest ski trip made without support or resupply. But he’s not someone who simply yearns for ski trekking; he’s an adventurer who actively seeks out challenges in the mountains, in climbing harness, wingsuit or parachute. We’re excited to following Aleksander on his future adventures.

B AC K

C O U N T RY

suggested skin width 45 mm

Cecilie BC A versatile, agile ski for active women

length width weight

170,175,180,185,190 76 56 66 895 g per ski (180 cm)

steel edge skin insert sinter and waxable

material poplar woodcore constr. cap binding BC/75 mm

item no. 542007

The Cecilie BC ski was developed in collaboration with the adventurer and Åsnes ambassador Cecilie Skog. Tuned for women, the Cecile BC’s full steel edge and moderate wax pocket offer stability and an enduring, dependable grip; easy to turn, its sidecut and width make for a ski offering excellent support and float on deeper snow. A back country ski for women who enjoy hiking or Nordic touring, the Cecile BC ski is equipped with Skinlock, ready for an X-Skin to be attached in an instant for climbing.

B AC K

C O U N T RY

B AC K

C O U N T RY

suggested skin width 45 mm

Nansen BC Versatile back country ski for varied terrain

length width weight

175,180,185,190,195,200,205 material poplar woodcore 76 56 66 constr. cap 1025 g per ski (200 cm) binding BC/75 mm

steel edge skin insert sinter and waxable

item no. 542006

The Nansen BC is the perfect backcountry ski for active skiers in varying terrain and conditions. Its steel edge and moderate wax pocket mark it out for challenging winter excursions. It is agile and easy to turn, with a generous sidecut and a width offering exemplary support and float on deeper snow. A ski built for those at home on winter hikes. Nansen BC skis are equipped with Skinlock, ready for an X-Skin (short skin) to be attached in an instant for climbing. Fritjof Nansen (1861–1930) was a polar explorer, scientist, diplomat and humanist. His expedition of 1888, made on skis, was the first documented crossing of Greenland. Aboard his ship ‘Fram’, he made important observations increasing our understanding of the Arctic Ocean. The winner of many awards for scientific research, he was awarded the 1922 Nobel Peace Prize for his humanitarian and contribution to peace.

B AC K

C O U N T RY

Ingstad BC The perfect ski for steeper terrain, deeper snow and demanding descents

suggested skin width 45/58 mm

The Ingstad BC is a modern back country ski with a generous sidecut, built for speed and agile turns. An ideal ski for demanding descents and extended traverses across flat terrain alike, its versatility comes from a moderate wax pocket, a pronounced Nordic rocker, and a tapered tip: it is stable, willing to turn, and easy to handle in deep snow and demanding terrain. Ingstad BC skis are equipped with Skinlock, ready for a climbing skin to be attached in an instant for climbing. For this ski, we recommend a 58 mm X-Skin in nylon for wet and steep terrain or a narrower mohair skin (45 mm) for cold temperatures and flat terrain. Helge Ingstad, once Governor of Greenland and Svalbard, was known as a trapper, polar hero, and scientist. He published several best-sellers about hunting in Canada, Greenland and Svalbard. Through this work he contributed to the creation to the heroic representations of the hunter’s adventurous life. Ingstad was also a researcher with a particular interest in the history and ethnography of the Arctic who contributed to our knowledge of the cultures of polar societies and the Norse settlements of North America.

length width weight

165,175,185,195,205 84 62 74 1025 g per ski (195 cm)

steel edge skin insert sinter and waxable

material poplar/paulownia constr. cap binding 75 mm/BC/BC Explore

item no. 542008

Photo © Sverre Hjørnevik

24 C O U N T RY B AC K

suggested skin width 45/58 mm

Combat NATO BC Light, robust and versatile ski for mountains or hunting

length width weight

170,180,190,200,210 material poplar woodcore /titanal 84 62 74 constr. cap 1200 g per ski (200 cm) binding 75 mm/BC/BC Explore

steel edge skin insert sinter and waxable

item no. 540224

The Combat NATO is a very light and robust ski with steel edges and a 22 mm sidecut. Developed for the army and military use, the ski is designed both for steep and demanding terrain and for travelling at speed in varied conditions – something achieved through a combination of a moderate wax pocket, a sidecut of 22 mm, and a balanced width, affording control and excellent floating properties on deeper snow. A ski for the trek and the swift descent. Designed to withstand anything the mountain can offer, the binding area is reinforced with the alloy Titanal while the sole is milled for low friction at the attachment point of the NATO X-Skin – a 45 mm climbing skin specially adapted for these skis. There is also an opening at the back of the ski for the attachment of a short skin in extreme temperatures.

B AC K

C O U N T RY

suggested skin width 45/58 mm

Tonje BC A ski for adventurous women who enjoy steeper skiing

length width weight

165,175,185 84 62 74 925 g per ski (175 cm)

steel edge skin insert sinter and waxable

material poplar/paulownia constr. cap binding 75 mm/BC/BC Explore

item no. 542009

Perfect for deep and demanding snow, playful on steep descents, the Tonje BC is a designed for adventurous women. Designed with a generous Nordic rocker, a sidecut of 22 mm, and tapered at the tip, this is a ski built for responsiveness, affording reassuring control in loose conditions. Tonje is equipped with Skinlock, ready for a climbing skin to be attached in an instant for climbing. For this ski, we recommend a 58 mm X-Skin in Mohair or Nylon. Tonje Blomseth may not be the world’s most famous skier. But since her journey from the southernmost to the northernmost points of Norway at the age of 17 (the youngest to accomplish it), this woman from Trøndelag has come to play a remarkable role in the Norwegian adventuring community. Today she lives as a trapper in the deep forests of Canada, making use of her skis daily. She is the winner of the Årets Villmarking award of 2016, previously won by the likes of Lars Monsen and Cecilie Skog. We look forward to following Tonje on new adventures.

B AC K

C O U N T RY

BC Explore New times await. With the introduction of the new Rottefella Xplore binding, you finally have a good fixation that can bring out the full potential in our wider nordic bc skis (”hybrids”). This concept opens for a whole new perspective on the ”hybrid ski”, as a marked and segment between the classic mountain skis and Alpine touring skis.

Easy to step into and out off the binding

Button to release flex/ anti-ice plate Avoid snowpacking

This is really a concept which to an even greater extent will give opportunities to explore the mountains, and which guarantees proper fun!

Better mobility when walking

The Xplore system redefines alpine touring, ski tours, and the nordic bc ski market, by opening up for more playful and progressive skiing. The binding and the bending point in the sole allow you to ski naturally and effectively so that you can travel longer distances, climb with less effort, and improved grip under your skis.

Shoes providing comfort, stability and mobility

Heel lift for more comfortable walking upwards in steep terrain

The torsional stiffness you get through the combination of binding and shoes, as well as increased ankle support, make you a better and more confident skier. The stability of the binding and the boots will make it possible to ski more aggressively and more and demanding descents.

B AC K

C O U N T RY

BC Explore The soles of the shoes are designed to be comfortable walking with, so one gets a flexible solution for both hiking and skiing in the snow, as well as when traveling to - and from the mountains. The Xplore system is specially designed for better stability and better downhill performance than the BC system has offered so far - without the expense of comfort when skiing.

More stability

Anti-skid sole

The further development of shoes, replaceable parts and accessories to the system make for a very flexible system, which to a large extent can be adapted to a wide range of usage and preferences. In Åsnes we have of course had a close dialogue with Rottefella, Alfa, and Alpina. We have therefore already had skis which are perfect in combination with this new system. We also have updated some ski models to work even better in this combination.

Replace the flex with an anti-ice plate for comfortable walking upwards

We have been so to have betatested and given feedback on the binding, and are safe when we say that this is one of the greatest developments for Nordic BC skiing in a long time. Of course, we will closely follow the development and give our feedback also in the future.

Leash as skistopper

B AC K

C O U N T RY

Change to a harder flex for better downhillskiing

new and improved ski

new ski length 196 cm

perfect for BC Xplore

suggested skin width 58 mm

Falketind 62 Xplore

Wide and playful skis for the back country

length width radius weight

172,180,188,196 97 62 86 18,7 m (180 cm) 1020 g per ski (180 cm)

steel edge skin insert race base sole

material poplar/paulownia woodcore/carbon constr. cap binding 75mm/BC-magnum/ BC Explore skin fix Fixation for race skins

The Falketind 62 is a wide and ultra-light back country ski designed, simply, to be great fun. Its generous side cut makes it excellent on the turn – for the 180 cm ski, a radius of 18.7 metres. Designed with a moderate wax pocket and constructed with a responsive poplar wood core, carbon reinforced for optimum torsional characteristics, the Falketind is ideal for those planning longer trips in demanding and steep terrain. It is ski for those who love to be on skis – climbing far for the pleasure of the descent.

item no. 542033

Falketind skis are equipped with Skinlock, ready for an X-Skin (short skin) to be instantly locked in place when climbing. This ski also comes with fixations for race-skins, making it possible to use the fastest climbing skins on the marked and handle them like the pro’s.

B AC K

C O U N T RY

new and improved ski

perfect for BC Xplore

suggested skin width 58 mm

Rabb 68 Weapon of choice for people who live for the descent and telemark skiing length width radius weight

172,180,188 104-68-94 17,2 m (180 cm) 1130 g per ski (180 cm)

steel edge skin insert race base sole

Front tip Waist Back tip Radius Weight

material poplar/paulownia/ carbon constr. cap binding 75 mm/tech/BC-Magnum /BC Explore

item no. 542309

172 cm 104 68 94 15,8 m 2160 g

180 cm 104 68 94 17,2 m 2260 g

188 cm 104 68 94 19,8 m 2360 g

The Rabb 68 is a nimble ski occupying a middle ground between back country and alpine touring – a ski for Telemark enthusiast and the weight-focused slope hunter alike. The ski is constructed with a responsive poplar core reinforced with carbon for optimum torsional stiffness and a width optimized for the demands both of ascent and descent. Rockered and tapered, and with a pronounced sidecut to ensure swift and stable descents in all conditions, the Rabb 68’s sidecut makes it perfect for agile turns – the 180 cm ski has a turning radius of 17.2 meters. Weapon of choice of long touring adventures with a 75 mm or tech binding, this is a ski for experienced mountaineers prepared to travel as far as it takes to find a slope, even in demanding terrain. Rabb 68 skis are equipped with Skinlock, ready for an X-Skin access skins to be instantly locked in place at the beginning of the ascent, and have attachment points for Pomoca and Colltex race skins. This ski also comes with fixations for race-skins, making it possible to use the fastest climbing skins on the marked and handle them like the pro’s.

B AC K

C O U N T RY

F R I E N D LY Photo © Henrik Vikse

D O G

no steel edge

new ski length 210 cm

suggested skin width 58 mm

Breidablikk BC The ultimate ski for hunting in varied terrain

length width weight

170,180,190,200,210 86 62 74 925 g per ski (190 cm)

skin insert sinter and waxable

material poplar woodcore constr. cap binding 75 mm/BC/BC Explore

item no. 542013

With no steel edge, the Breidablikk was developed for those who leave for the backcountry with their dog, whether for hunting or simple companionship. The Breidablikk is a superb hunting ski with a soft tip and sidecut of 22 mm, making it easy to turn and offering control in demanding terrain with reassuring support and float on deeper snow. You do not need to be a hunter to remark on the Breidablikk’s suitability for long winter hikes in moderate terrain. A faithful companion in the mountain. Breidablikk skis are equipped with our Skinlock, ready for an X-Skin climbing skin to be attached in an instant for climbing or secure grip on challenging snow conditions.

D O G

F R I E N D LY

no steel edge

new design

suggested skin width 58 mm

Kongsvold BC The ultimate hunting ski at the treeline and turns in deep snow

length width weight

170,180,190,200 96 66 85 975 g per ski (190 cm)

skin insert sinter and waxable

material poplar woodcore constr. cap binding 75 mm/BC/BC Explore

For those who take their dogs with them, for hunting or the simple pleasure of companionship in the mountains, the Kongsvold Hunter is built without steel edges to be safe for paws. The Kongsvold’s generous sidecut and soft tip mean a stable ski, easy to turn, with a reassuring float on deeper snow. The stiffer mid-section makes it possible to choose skis up to 10 cm shorter than others, and – if you have the technique – enjoy parallel turns on the descent.

item no. 542030

A ski that meets the challenge of demanding terrain, this is a faithful companion in winter hunting at the treeline.

D O G

F R I E N D LY

no steel edge

suggested skin width 45 mm

Finnmark 54 BC Versatile, dog-friendly ski for trekking and moderate terrain

length width weight

170,180,190,200,210 68 54 61 840 g per ski (190 cm)

skin insert sinter and waxable

material poplar woodcore and carbon constr. cap binding BC/75 mm

item no. 542012

Reassuringly firm and responsive on the turn, the Finnmark 54 is a ski with a prominent wax pocket. Its light carbon and glass fibre-reinforced poplar wood core give it a stiffness perfect for extended outings on mountain plateaus or expeditions – even with a backpack or a sled in tow. And built without a steel edge, it’s friendly to paws – just enjoy the company of your dog. The combination of high-cambered wax pocket, pronounced sidecut and Nordic Rocker (Early Rise) offers grip, stability and agility on even the longest trips, and all at width making it versatile enough for both groomed tracks and everything but the most difficult terrain. The Finnmark 54 comes equipped with Skinlock, ready for an X-Skin to be attached in an instant for climbing. To make the most of the Åsnes X-Skin system, we recommend a X-Skin Mohair 45 mm for cold weather/ moderate terrain; for wet snow, hard use and steep terrain, a 45 mm Synthetic X-Skin should do.

D O G

F R I E N D LY

Photo © Jon Hunnålvatn Tøn

C O U N T RY C R O S S

3/4

steel edge

suggested skin width 45 mm

Mountain Race Jr. BC A light back country ski for younger mountain people

length width weight

140,150,160,170 60 51 55 510 g per ski (150 cm)

3/4 steel edge skin insert sinter and waxable fits in groomed tracks

material poplar woodcore constr. cap binding NNN/BC

A 30 mm mohair skin is recommended for these skis, cut to about 3 to 5 cm behind the heel of the boot. A 45 mm for better grip is also possible.

item no. 542203

Advantages with 3/4 steel edge: The ski is easier to plow, the tips more forgiving, the ski easier to turn and a ski that does not track too much.

C R O S S

Mountain Race Jr. is a back country ski through and through, at a size perfect for younger explorers. Its ¾ steel edge offers control; its soft tip and prominent sidecut allow easy turns. A perfect ski for playful days in the snow, frustrating slides in slippery conditions can be prevented with the attachment of a short skin: good times for all guaranteed (well, almost).

C O U N T RY

We also recommend NNN bindings or junior bindings, allowing the use of the same shoes as classic crosscountry skiing. Combi boots are a good idea, too – they’re usually thicker, warmer and more stable. There is nothing wrong in mounting a NIS plate or an adjustable touring binding either.

3/4

steel edge

suggested skin width 30/45 mm

Mountain Race 48 Superlight crossover BC crosscountry ski with 3/4 steel edges

length width weight

180,190,200,210 60 48 53 760 g per ski (200 cm)

3/4 steel edge skin insert sinter race base fits in groomed tracks

material poplar/paulownia constr. cap binding BC/NNN

The ski is also built with Skinlock, allowing the instant attachment of the X-Skin, making it possible to climb more demanding hills and negotiate more demanding terrain with little effort.

item no. 542201

Its prominent wax pocket, moderate side cut and ¾ steel edges, meanwhile, offer stability and control on the descent.

Advantages with 3/4 steel edge: The ski is easier to plow, the tips more forgiving, the ski easier to turn and a ski that does not track too much.

C R O S S

Strong enough to handle rough terrain and hard conditions, yet perfectly at home on the groomed tracks, the Mountain Race 48 Skin is a ski for the quicker adventure.

C O U N T RY

And constructed with a core of paulownia wood for strength and weight, 48 mm at the waist, the Mountain Race 48 weighs a remarkable 1520 g per pair for the 200 cm skis – perfect for leaving the groomed tracks to break trails.

3/4

steel edge

suggested skin width 45 mm

Mountain Race 48 Skin Mountains. Groomed tracks. Why choose?

length width weight

180,190,200,210 60 48 53 760 g per ski (200 cm)

3/4 steel edge skin insert sinter race base fits in groomed tracks

material paulownia/poplar constr. cap binding NNN/BC

Strong enough to handle rough terrain and hard conditions yet perfectly at home on the groomed tracks, the Mountain Race 48 Skin is a ski for the quicker adventure.

item no. 542204

The Mountain Race 48 Skin comes equipped with the Pomoca Climb 2.0 integrated climbing skin, offering excellent grip and unimpeded glide. The ski’s prominent wax pocket, moderate sidecut and ¾ steel edges offer stability and control on the descent.

Advantages with 3/4 steel edge: The ski is easier to plow, the tips more forgiving, the ski easier to turn and a ski that does not track too much.

C R O S S

C O U N T RY

Constructed with a core of paulownia wood for strength and weight and 48 mm at the waist, the Mountain Race 48 Skin weighs a remarkable 1550 g per pair for the 200 cm skis – perfect for leaving the groomed tracks to break trails. The ski is also built with Skinlock, allowing the instant attachment of the X-Skin, making it possible to climb more demanding hills and negotiate demanding terrain.

A L P I N E

TO U R I N G

new and improved design

suggested skin width 58 mm X-Skin/74 mm access skin

Nosi 76 An alpine touring ski built for the long approach

length width radius weight

164,172,180 111-76-98 (172 cm) 18,2 m (172 cm) 1075 g per ski (172 cm)

steel edge skin insert race base sole

Front tip Waist Back tip Radius Weight

material poplar/paulownia/ carbon constr. cap binding tech skin fix fixation for race skins

172 cm 111 76 98 18,2 m 1075 g

The Nosi 76 is the perfect ski for those who want to explore the mountains, logging as much altitude as possible during the season: at a mere 1075g underfoot, don’t worry about the height of the approach. A turn radius of 18.2m (172cm) and a slim waist makes the Nosi 76 perfect for turns on solid and hard surfaces. On snowy winter days, the soft tip and the construction of the rocker and taper floats you easily over the fresh new snow.

item no. 542310

164 cm 111 76 98 16,1 m 1030 g

On the way down, the Nosi 76 offers the feeling of a classic touring ski, solid and stable. On the ascent, however, it feels like you’re shinning up the hill on a pair of rando-race class skis.

180 cm 111 76 98 20 m 1175 g

In order to keep the weight low and maintain the skiability, the Nosi 76 has a wood core made of poplar and paulownia, reinforced with carbon and fiberglass. These skis are equipped with Skinlock for the instant attachment of the X-Skin Access skin – a short and lightweight climbing skin, perfect for long approaches and moderate terrain, that fits in the jacket pocket. The Access skin is so light that there’s simply no reason not to take it with you. Choosing these skis, it’s best to go for lengths 5–10cm shorter than your height. This ski also comes with fixations for race-skins, making it possible to use the fastest climbing skins on the marked and handle them like the pro’s.

A L P I N E

TO U R I N G

4 0

suggested skin width 100 mm access skin

new and improved design

Fjøro 92 Versatile, playful, lightweight alpine touring ski

length width radius weight

167,176,187 129-92-105 (187 cm) 21 m (187 cm) 1495 g per ski (187 cm)

steel edge skin insert race base sole

Front tip Waist Back tip Radius Weight

157 cm 123 92 101 15 m 1260 g

material poplar/paulownia/ carbon constr. semicap binding tech

item no. 542311

164 cm 125 92 103 17 m 1335 g

176 cm 127 92 104 19 m 1410 g

A L P I N E

187 cm 129 92 105 21 m 1495 g

How do you pick your line down the mountain? Our advice: let the Fjøro 92 skis help you choose. They’re really good at it. The playful taper and rocker on these skis is designed to offer a superb float on powder snow – the kind of support you could only find on wider skis before. And there are advantages to skis as short as 92 mm under your boots. Holding an edge is much easier, for a start – a definite asset on hardpack when close contact between foot and steel edge is crucial. Edge control when turning at speed is further improved by the Fjøro 92’s crosshatched carbon reinforcement. Fjøro 92 skis are light underfoot, stable on the steel edge, and simply amazing fun in the powder. Apologies in advance if this contributes to over-enthusiastic shouting and wild fist pumps when you’re shooting through the powder forest. These skis are equipped with Skinlock for the instant attachment of the X-Skin Access skin – a short and lightweight climbing skin, perfect for long approaches and moderate terrain, that fits in the jacket pocket. The Access skin is so light that there’s no reason not to take it with you to go that little bit further in pursuit of pristine snow.

TO U R I N G

Voss Z´N Lightweight, yet playfyl, poppy, surfy and stable big mountain ski

length width radius weight

167,176,187 133-106-120 (187 cm) 22 m (187 cm) 1940 g per ski (187 cm)

steel edge skin insert race base sole

Front tip Waist Back tip Radius Weight

material poplar woodcore constr. semicap binding tech/din

item no. 542308

167 cm 127 104 114 19 m 1732 g

176 cm 130 105 117 20,5 m 1825 g

A L P I N E

187 cm 133 106 120 22 m 1940 g

TO U R I N G

Voss Z’N is the ski a modern and offensive skier would choose. A ski that works for freeride skiing, playful skiing in the powder as well as alpine touring. With a waist of 106 mm below the foot, generous Rocker and Taper tips, one gets a ski that can handle all what the mountain has to deliver. With a solid construction and medium turning radius, this is a ski which will enjoy both speed and big mountain turns. It is very responsive and feels quick on the edge. Voss Z’N is safe, stable and playful ski. Voss Z’N is named after the legendary lin at Voss, which is called Z’N by the freeride community. This is a line that offers both deep forest snow and steep, exposed runs. Together with the freeridie community, enthusiasts and ski guides at Voss, we have developed the optimal ski for a modern freeride skier. If one only need a one-quiver ski, this means that the ski must be light enough to go alpine touring, could be ridden at high speed in varying snowpack, be playful and function on the days you want to carve with the family in the groomers. That makes for the Voss Z’N!

4 3

Photo © Jon Hunnålvatn Tøn

TO U R I N G A L P I N E

Åsnes has a long history with waxless skis Since the early ’70s, Åsnes have developed waxless patterns and technology to produce skis with these ”shell patterns”. For a longer period, Åsnes held important patents, and still, today continues to further develop and better waxless patterns, in line with the development of new technology and the new possibilities. Our waxless pattern and our waxless skis come in combination with a finetuned camber and ”pocket” and a ”fish shell pattern” developed by us to function in various snow conditions. A good camber, a ski that bears loads, and a solution that will grip on regular winter snow make waxless skis appealing to many. All our Waxless skis come with our integrated skinlock (R)(TM) so that one can use our X-Skin(R) short skins in combination with the waxless sole. This makes for a good, simple, and reliable combination. Perfect for anyone wanting simplicity and avoid grip wax, klister, and sticky stuff.

suggested skin width 30/45 mm

Amundsen Fram Waxless length width weight

170,180,187,194,201,208 67 57 62 1010 g per ski (201 cm)

steel edge skin insert waxless base

material poplar woodcore constr. cap binding BC

item no. 542028

WA X L E S S

Amundsen Fram Waxless is a waxless ski, stiff along its length, narrow enough for groomed tracks but perfectly at home in the mountains. A ski for long mountain excursions, with a higher pocket over the grip zone than the Amundsen, the full steel edge and the stiffness and stability of the Amundsen Fram Waxless make it ideal for treks with extra weight – perfect for adventurers planning long trips with a sled or heavy loads.

4 6

no steel edge

suggested skin width 45/58 mm

Breidablikk Waxless length width weight

170,180,190,200 86 62 74 925 g per ski (190 cm)

skin insert waxless base

material poplar woodcore constr. cap binding 75 mm/BC

item no. 542017

With no steel edge, the Breidablikk was developed for those who hunt with dogs – or for those who simply want the companionship of a dog on trips to the back country. This hunting ski’s sidecut of 22 mm and soft tip make it ski easy to turn; it’s a ski easily to control in demanding terrain, offering excellent float on deeper snow. The Breidablikk has both an extruded sole with a waxless coating and Skinlock, making it ready for an X-Skin to be instantly locked in for efficient climbing. This makes for an ski extremely versatile ski, whatever the terrain or conditions.

WA X L E S S

suggested skin width 45/58 mm

Cecilie BC Waxless version of the iconic Cecilie BC ski The Cecilie BC Waxless is the same ski at the bestseller Cecicile BC, just with a Waxless sole with our self developed “fish-shell” pattern. This is a ski that once was developed in close cooperation with the adventurer and Åsnes ambassador Cecilie Skog. Tuned for women, the Cecile BC’s full steel edge and moderate wax pocket offer stability and an enduring, dependable grip; easy to turn, its sidecut and width make for a ski offering excellent support and float on deeper snow. A backcountry ski for women who enjoy hiking or Nordic touring, the Cecile BC ski is equipped with Skinlock, ready for an X-Skin to be attached in an instant for climbing. This is a ski that is experienced as easy to handle for most people. Due to a smaller and lower camber profile, you will always be guaranteed a good grip, regardless of snow conditions.

length width weight

170,175,180,185,190 76 56 66 895g per ski (180 cm)

steel edge skin insert waxless base

material poplar woodcore constr. cap binding 75 mm/BC

Our Waxless pattern and our Waxless skis come with a camber profile and pocket developed for good grip and a self-developed “shell pattern” that works well in several snow conditions. Forgiving camber, good carrying capacity, stability, and a solution that provides usable attachment to normal winter conditions make Waxless skis a good option for many. All our Waxless skis come with an integrated Skinlock, so you can use the X-Skin short skin in combination with the Waxless sole. This provides a good, simple, and reliable combination. Perfect for those who do not want to bother with waxing and klister. If you want to get the most out of Åsnes’ X-Skin system, we recommend using a custom climbing skin, either X-skin 45mm Mohair for cold conditions / moderate terrain, X-Skin 45mm Mix for all-round use or X-skin 45mm Nylon for wet conditions / steep terrain. Cecilie Skog is one of the world’s foremost adventurers, an avid polar explorer and mountain climber. Cecilie was the first woman in the world to both reach the highest peaks on all seven continents (Seven summits), and reach the South and North Poles, a feat known as “The Explorers Grand Slam”. She has also crossed Greenland a number of times and been on top of several 8000-meter peaks, including Cho Oyu and K2.

item no. 542018

WA X L E S S

suggested skin width 45/58 mm

Ingstad Waxless length width weight

165,175,185,195,205 84 62 74 1025 g per ski (195 cm)

steel edge skin insert waxless base

material poplar/paulownia constr. cap binding 75 mm/BC

item no. 542020

The Ingstad Waxless is a modern back country ski with a generous sidecut, built for speed and agile turns. An ideal ski for demanding descents and extended traverses across flat terrain alike, its versatility comes from a moderate wax pocket, a pronounced Nordic rocker, and a tapered tip: it is stable, willing to turn, and easy to handle in deep snow and demanding terrain. Ingstad Waxless skis are equipped with Skinlock, ready for a climbing skin to be attached in an instant for climbing. For this ski, we recommend a 58 mm X-Skin in nylon for wet and steep terrain or a narrower mohair skin (45 mm) for cold temperatures and flat terrain. Helge Ingstad, once Governor of Greenland and Svalbard, was known as a trapper, polar hero, and scientist. He published several best-sellers about hunting in Canada, Greenland and Svalbard. Through this work he contributed to the creation to the heroic representations of the hunter’s adventurous life. Ingstad was also a researcher with a particular interest in the history and ethnography of the Arctic who contributed to our knowledge of the cultures of polar societies and the Norse settlements of North America.

WA X L E S S

suggested skin width 45 mm

Nansen Waxless length width weight

180,185,190,195,200,205 76 56 66 1025 g per ski (200 cm)

steel edge skin insert waxless base

material poplar woodcore constr. cap binding BC/75 mm

item no. 542019

The Nansen Waxless is the perfect backcountry ski for active skiers in varying terrain and conditions. Its steel edge and moderate wax pocket mark it out for challenging winter excursions. It is agile and easy to turn, with a generous sidecut and a width offering exemplary support and float on deeper snow. A ski built for those at home on winter hikes. Nansen Waxless skis are equipped with Skinlock, ready for an X-Skin (short skin) to be attached in an instant for climbing. Fritjof Nansen (1861–1930) was a polar explorer, scientist, diplomat and humanist. His expedition of 1888, made on skis, was the first documented crossing of Greenland. Aboard his ship ‘Fram’, he made important observations increasing our understanding of the Arctic Ocean. The winner of many awards for scientific research, he was awarded the 1922 Nobel Peace Prize for his humanitarian and contribution to peace.

WA X L E S S

no steel edge

suggested skin width 45/30 mm

Finnmark 54 Waxless length width weight

170,180,190,200,210 68 54 61 840 g per ski (190 cm)

fits in groomed track skin insert waxless base

material poplar/carbon constr. cap binding BC/75 mm

item no. 542029

Reassuringly firm and responsive on the turn, the Finnmark 54 Waxless is a ski with a prominent camber. Its light carbon and glass fibre-reinforced poplar wood core give it a stiffness perfect for extended outings on mountain plateaus or expeditions – even with a backpack or a sled in tow. And built without a steel edge, it’s friendly to paws – just enjoy the company of your dog. The combination of high camber, pronounced sidecut and Nordic Rocker (Early Rise) offers grip, stability and agility on even the longest trips, and all at width making it versatile enough for both groomed tracks and everything but the most difficult terrain. The Finnmark 54 comes equipped with Skinlock, ready for an X-Skin to be attached in an instant for climbing. To make the most of the Åsnes X-Skin system, we recommend a X-Skin Mohair 45 mm.

WA X L E S S

Photo © Casper Fløysand Andresen

New belt construction – for easy length adjustment

Ergonomically designed handle for good and flexible grip

Choosing the ski pole length

EVA is an environmentally friendly alternative to cork

When choosing the right lenght in BC ski poles, a rule of thumb is to choose the pole around 30-40cm shorter than you own height. Nordic BC poles is normally chosen a bit shorter than regular ski poles because one want as good blood circulation as possible to hands and arms in the cold. On another note, we recommend that you pick a length in regards to you personal preference and based on what you are comfortable with.

New adjustment around the wrist (one-hand grip)

New belt lock Long grip in EVA – designed for quick changes of grip

EVA keeps the heat and provides a comfortable grip

Security leash attachment

New solid and secure screw lock

Solid loose snow basket in Hypalon and PA6

Cecilie Alloy Pole Light, comfortable, hardy all-rounder length 130,135,140,145,150 weight 480 g material alloy 7075

item no. 541701 541711 New package

Cecilie is a brand-new aluminium pole produced in 7075 aluminium – beautifully light and solid enough to withstand the mountain’s worst. This ski pole has a long, ergometric and comfortable handle allowing an easy change of grip as the terrain changes. • • • • • • •

Long grip in EVA – designed for quick changes of grip New belt construction – for easy length adjustment New belt lock New adjustment around the wrist (one-hand grip) Security leash attachment Solid loose snow basket in Hypalon and PA6 Aluminium construction

S K I

P O L E S

Ingstad Alloy Pole Light, comfortable, hardy all-rounder length

130,135,140,145, 150,155,160 weight 520 g (150 cm) material alloy 7075

item no. 541703

Ingstad is a brand new aluminium pole manufactured in I 7075 aluminium for light weight and solidity. With a long and comfortable handle designed to allow an easy change of grip in varying terrain, it is perfect for anyone going out in the back country, trekking and touring. • • • • • • •

S K I

P O L E S

S K I

P O L E S

Amundsen Carbon/Kevlar The lightest and most solid carbon/ kevlar BC pole on the market length 130,135,140,145, 150,155,160 weight 430g (150 cm) material carbon/kevlar

item no. 541702

The Amundsen pole is the next generation skipole based on the well known and tested Spidsbergen Expedition pole. The preferred pole for longer expeditions. Constructed in Carbon with Kevlar reinforcements for optimal strength to weight ratio. The Kevlar protects against critical damage on the Carbon and makes Amundsen the lightest and strongest carbon alternative on the market. Perfect for expeditions and for the feinschmeckers. • • • • • • • •

S K I

P O L E S

new

Breidablikk BC 2-Section Alloy Pole Robust and adjustable BC ski pole with a innovative and flexible grip length adjustable 110–155 cm weight 500 g material alloy 7075

item no. 541707

Lightweight, solid and adjustable ski pole made of 7075 aluminum. This pole has a double-expandable lock for good hold. A perfect ski pole for varying conditions and terrain, where easy adjustment of the length is necessary. • • • • • • • •

S K I

P O L E S

new

Polar 2-Section Carbon/Kevlar The perfect adjustable choice for everyone going into the backcountry on BC – or mountain skis length adjustable 110–155 cm weight 470 g material carbon/kevlar

item no. 541704

The Polar 2 Section pole is the ultimate adjustable pole – made in Carbon, with Kevlar reinforcements. This pole is quipped with a state of the art locking mechanism specially developed by Åsnes and Per Finne, making it easy to adjust the length of the pole. This is the perfect skipole for the picky backcountry traveller. A good choice for both alpine touring and BC skiing. The Polar pole has a good balance and comes with both a powder- and a alpine basket. • • • • • • • • • •

Long grip in EVA – designed for quick changes of grip Solid og enkel justering av stav lengde New belt construction – for easy length adjustment Ny konstruksjon på låsing av reim New adjustment around the wrist (one-hand grip) Security leash attachment Solid loose snow basket in Hypalon and PA6 Carbon/Kevlar construction Easy-lock system Extra equipment: Security leash

S K I

P O L E S

Nansen 2-Section Alloy/Carbon The best allround choice for every alpine touring – and backcountry travel on skis length adjustable 110–155 cm weight 500 g material alloy 7075/carbon

item no. 541700

The Nansen pole is a newly developed 2-part skipole made in 7075 Aluminum and Carbon. This pole is equipped with our new and innovative adjustable locking mechanism, which makes this a solid and safe choice in adjustable poles. The Nansen pole is a perfect option for the allround user who wants a pole that works for all backcountry purposes. • • • • • • • •

S K I

P O L E S

6 0

Combat 2-Section Pole Solid and innvotative mulitipurpose skipole length adjustable 110-155cm weight 540 g material alloy 7075

item no. 541705

Alloy pole produced in a solid 7075 alloy quality. This pole is adjustable (2-Section) and can be adjusted from 110-155cm. Twist lock with double expansion, this secures the pole in selected length. NATO Alloy 2-section is adapted for Nordic Backcountry skiing and has a long narrow grip produced in EVA material. This to adapt/change grip when moving into steep terrain and when using a sled. Wide straps gives solid support in steep terrain and constructed with an easy adjustment of strap ( also with the use of mittens/glows). A wide basket in PA/Nylon and Hypalon. The diameter of the basket is 105mm and secures sufficient support in deep snow. Long grip in EVA – designed for quick changes of grip • New belt construction – for easy length adjustment • New belt lock • New adjustment around the wrist (one-hand grip) • Security leash attachment • Solid loose snow basket in Hypalon and PA6 • Easy-lock system • Extra equipment: Security leash and loose snow basket

S K I

P O L E S

P O L E S S K I

Fram BC Alloy Pole Lightweight and solid aluminum pole for backcountry and XC use length 130,135,140,145,150,155,160 weight 580 g material alloy 7075

item no. 541706

Fram BC Alloy Pole is an excellent pole for use outside of groomed tracks. It is lightweight, and made of solid 7075 aluminum. Comes with a wide basket and a long, simple and practical EVA grip. • • • • • • • •

S K I

P O L E S

Tind 2-Section BC Alloy Pole Tind 2-Section Alloy Pole pole LAdjustable ett og solaluminum id aluminBC i um sst a v made for use in the mountains

f or f j e l l og m a r k a

Tind 2-Section Alloy Pole is an excellent pole adjustable for use outside groomed tracks. It is lightweight, and made of solid 7075 aluminum. turofog fjell bruk. Comes with a wide basket and a long, simple and practical EVA grip.

Lett og solid aluminiumsstav for Fram turstav er en flott skistav til bruk i marka og på fjellet

length adjustable 110–155 cm weight 600 g material alloy 7075

Adjustable between 110-155cm.

item no. 541708

Produsert i aluminium 7075 Lav vekt og god stabilitet. Lengre håndtak av EVA Behagelig polstret håndstropp. Solid løssnøtrinse i Hypalon og PA6 Dobbeltekspanderende lås

799,S K I

P O L E S

6 4

Spare Basket 105 mm Recommended spare part for longer outings All Åsnes ski poles come with a solid expedition style basket made for most conditions and looser snow. Even though these baskets can take a beating, we always recommend bringing a set of spare baskets on multi-day adventures. These spare baskets will fit all Åsnes poles.

item no. 541751 (blue)

item no. 540076 (black)

The baskets are made of Nylon and Hypalon, has a diameter of 105mm and weighs 55 grams. item no. 540231 (red)

item no. 541750 (orange)

Spare Basket 125mm

Alpine basket Strong and flexible spare basket

item no. 541754

Alpine style spare basket for alpine touring and alpine style activities. This basket is made of really strong and flexible Thermoplastic Polyester (TP). The diameter is 80 mm and each piece weights 34 grams. item no. 540317

S K I

P O L E S

Security Leash Safety secutity leash for Åsnes skipoles Åsnes Security Leash is a smart cord you can mount in the small attatchement on all newer poles from Åsnes. This leash can be used to prevent the loss of poles in wind, as a tool to read wind direction or as a tethering point for guy lines on the tent. This solution was developed in cooperation with the worlds leading polar explorers. item no. 541752

Spare Strap Spare strap for Åsnes skipoles Spare part for Åsnes ski poles. This strap is the same as you can find on all newer poles from Åsnes. item no. 541753

S K I

P O L E S

P O L E S S K I

X-SKIN is next generation short skins. The SKIN PROTECTOR makes for less friction and better gliding properties, as well as function as a protection against icing and abrasion on the skins. For more than 20 years Åsnes has delivered skis with skinlocks for short skins and kicker skins. Our solution has proved to be superior in terms of quality and characteristics on countless expeditions. We are proud to introduce the next generation short skins, which is based on the same quality and innovation as always. Our new X-Skins has the same protection in the front as before, but the height of the Skin Protector has been reduced and the Protector further developed for much less friction. The SKIN PROTECTOR is a solid plate facing against the snow, making for optimal protection and with metal arms for swift mounting. The new X-Skins fits all previous Åsnes skis, no worries!

X - S K I N

Mohair Best suited for those who want optimal glide and a good grip. The Mohair material is developed to function perfect on colder conditions and in powder snow. Mohair glides a lot better than Nylon, but will have less durability.

Better glide

Nylon Nylon is a material that is best suited for long expeditions and mechanical wear. The Nylon skins are good for wet conditions, and crust. They do not glide as good, but they are were durable and the nature of the syntetic fibres does not absorb as much moist.

More durability

Mix The mix skins are, as the name can tell us, as mix of 70%mohair and 30% nylon. It is a good compromise between durability, grip and glide. The mix skins capabilities to withstand abrasion, mechanical damage and the waterproof membrane from Pomoca, makes this for a really good all-round option, even on wet days.

A good blend

This skin is really versatile, and will fit most skiers, from beginners to more advanced users. For even better performance, we reccomend proofing or waxing the skins. This will not only make them glide better, but also make them more durable and prevents ice -and snow build up. X - S K I N

Secure fixing of skins SKIN-PROTECTOR, reduce icing and abrasion Easy to mount, easy to dismantle Optimal glide and good grip while skiing

X - S K I N

Åsnes X-Skin Nylon 100 % nylon for optimal durability and grip X-Skin Nylon is produced in 100 % nylon from Colltex in Switzerland. This width is recommended for narrow models like Mountain Race and Mountain Touring skis. Made of nylon for optimal durability and grip, this short skin can be used on all Åsnes skis with a skin insertion point. Nylon skins are excellently suited for wet and heavy snow. Equipped with a skin-protector at the front to prevent ice and snow accumulating on it and to secure it for long distances.

length width weight

650 mm 30 mm 160 g

650 mm 45 mm 200 g

650 mm 58 mm 250 g

item no.

541000

541001

541002

Åsnes X-Skin Mohair 100 % mohair for reduced friction and increased speed X-Skin Mohair is produced in 100 % mohair by Colltex in Switzerland for optimal speed and grip. X-Skin skins can be used on all Åsnes skis with a skin insertion point. To further enhance its performance, we recommend proofing the skins with wax or skinproofer to provide better glide and reduced friction. Equipped with a skin-protector at the front to prevent ice and snow accumulating on it and to secure it for long distances.

length width weight

650 mm 30 mm 180 g

650 mm 45 mm 200 g

650 mm 58 mm 250 g

item no.

541003

541004

541005

Åsnes X-Skin 40 mm Race Reduce friction and increase speed Produced in mohair RACE GRIP materials from POMOCA in Switzerland, X-Skin 40 mm RACE can be used on all Åsnes skis with a skin insertion point. The climbing skin is made of 100 % mohair for optimal speed and grip. X-Skin 40mm RACE is well suited for all Åsnes models if reduced friction and speed is your goal. Equipped with a skinprotector at the front to prevent ice and snow accumulating on it and to secure it for long distances.

length width weight material

650 mm 40 mm 85 g 100 % Mohair Race Pro Grip

item no. 541006

Åsnes X-Skin 45 mm Mix All-round skin in 70% mohair and 30% nylon Short skin made in the same 70/30% quality as the bestselling Pomoca Climb 2.0 alpine touring skin. This climbing skin is a good compromise between the durability of synthetic skins and the glide from mohair skins. Suitable as a good all-round skin for most conditions and most people. The skin is equipped with a skin-protector at the front to prevent ice and snow accumulation and to secure it for long distances.

length width weight material

650 mm 45 mm 90 g 70% mohair og 30% nylon

item no. 541008

Access Skin Perfect skin for access and easy climbing A fantastic climbing skin for our alpine touring skis, made of 70/30 mohair/nylon for optimized grip and glide. Attached in the centre of the ski, this skin provides a reassuringly dependable grip during approaches in less demanding terrain. This short skin is easy to bring along and demands minimal space in your backpack or pocket; its low weight helps to reduce the overall weight of the equipment with approximately 300–500 g compared to traditional climbing skins.

length width weight fits with

650 mm 74 mm 150 g Rabb 68 and Nosi 76

650 mm 100 mm 280 g Tindang 86 and Fjøro 92

item no.

541100

541101

Åsnes X-Skin Nato Short climbing skin adapted to the Combat NATO ski The special 45 NATO short skin is adapted for the Combat NATO ski. It is made of 100 % nylon, perfectly suited for wet and heavy snow, for optimal durability and grip. Equipped with the very durable skin-protector made in metal at the front to prevent ice and snow accumulating on it and to secure it for long distances. To further enhance the skin’s performance, we recommend waxing/proofing the skins for a better glide.

length width weight

650 mm 45 mm 200 g

item no. 540225

Åsnes X-Skin Extreme 100% nylon and metal skin protector, perfect for expeditions The Extreme 45 mm short skin is made from in 100 % nylon by Colltex in Switzerland and can be used on all Åsnes skis with skin insertion points. The skin is made of nylon for optimal durability and grip; nylon skins are excellent in wet and heavy snow.To further enhance the skin’s performance, we recommend waxing/proofing it for a better glide. The Extreme 45 is intended for long and hard expeditions where equipment must be built to withstand rough handling. Equipped with the very durable skin-protector made in metal at the front to prevent ice and snow accumulating on it and to secure it for long distances.

length width weight

650 mm 35 mm 160 g

650 mm 45 mm 200 g

650 mm 60 mm 250 g

item no.

540208

540209

540210

ACC E S S O R I E S

BC Skibag - Single Lightweight, neat and versatile skibag A neat and versatile ski cover for skis up to 210-214 cm in length. It has a long zipper that makes it easy to unpack skis, poles, and other equipment, and the carrying straps make transport easier. The ends are reinforced for extra durability. This ski bag also has other functions and can function as a ”tent bag” on longer trips. The length of the ski cover is such that you can easily put the poles from longer tunnel-tents, which are often used on winter expeditions, in the cover. By packing the tent with the poles lying in the tent poles’ channels, you can save time and get a safe and efficient tent setup. The tent can be rolled up and folded like a sausage in the ski bag, and then strapped on the sled. On the way to and from, or on the train, the cover can be used to store skis and ski equipment. • • • • •

Designed to carry skis up to 215cm in length Use as smart storage of tents on longer trips Long zipper for easy packing and unpacking Reinforced ends Solid carrying straps

length width/height weight

214 cm 19/14 cm 860 g

item no.

541602

ACC E S S O R I E S

MR48 replacement skin Replacement skin for the Mountain Race 48 SKIN ski Spare part and replacement skin for the Mountain Race 48 SKIN ski model. This skin is produced from the same fabric as the Pomoca Climb 2.0, being a 70/30 Mohair and Nylon mix. This is a solid skin with good gliding characteristics and a good grip. The skin is easy to replace. Make sure to clean and dry the area where the skin is attached to the base of the ski before gluing on the replacement. The replacement should take place in normal room temperature.

length width weight

420 mm 30 mm 30 g

item no.

541007

Ski strap Solid ski strap made in TPU with a PA locking mechanism. The best choice for all skis. The straps comes in a pair, packed in a handy packaging – perfect for retail sales.

length width

660 mm 25 mm

item no.

541600

ACC E S S O R I E S

Colltex AG has been based in Glarus, in the heart of Switzerland for 70 years – surrounded by alpine mountains and the majestic mountain Tödi as a background. The location and views from the Colltex headquarters has inspired Colltex to always pursue new solutions for their products. Most important of all has been the uncompromising hard work to develop the ultimate climbing skin so that you can travel safely and comfortable in the mountains. The longest of experience and knowledge is not enough for Cllotex on its own, they always work closely with mountain guides, Skimo athletes and freeride skiers and everyone that lives of – and in the mountains. Colltex let you travel safe and fast to your favorite mountains.

colltex.ch

C O L LT E X

Colltex Drybase COLLTEX DRYBASE Waterproofed membrane backing New ways to coat your ski skins The back of the ski skins is a fabric made of cotton and synthetics. The back of all Colltex skins is now additionally treated with a special coating. Only then, the proven hotmelt resin adhesive is applied. This additional coat called Colltex Drybase has the following advantages:

DRY

> Hardly any water absorption: the hollow spaces in the fabric are filled by Colltex Drybase. Thanks to this sealing, hardly any water can penetrate into the fabric back. The ski skin will remain dry and light even in warm snow conditions. > Chemical bond: the Colltex Drybase coating creates an optimum chemical bond to the hotmelt resin adhesive. The hotmelt thus adheres in an optimum manner to the back of the ski skin. This renders tearing off the adhesive very unlikely. > More durable: the Colltex Drybase coating makes the back of the ski skin more resistant to torsion, stronger and more durable – without losing its suppleness. The few grams extra of coating are compensated several time over as the ski skin hardly absorbs any water.

DRY

C Three questions to Vitus Schweizer, Cert. Textile Engineer and

What do you consider to be the greatest challenge of this project? Colltex Drybase is the next step in developing our future ski skins. With this «positive change of the product», we had to pay great attention to avoid any negative imOpact L LonTtheE already X optimized and good properties of the ski skins.

The advantages of Colltex Drybase include greatly reduced water absorption, an optimum chemical bonding to the adhesive and increased strength. What do you consider to be the most obvious advantage? The low water absorption is certainly what most ski tourers hoped for. For me, it is equally exciting

Colltex Nylon 100% nylon – excellent grip and durability The climbing skin from Colltex is produced in 100 % Nylon for optimal durability and grip. Nylon is a material that is suitable for rough usage. This skin is delivered with a per-installed metal buckle in the tip and can easily be adapted to any ski. Nylon are excellent suited for wet and heavy snow. If you want to improve performance from the skin we recommend waxing the skin.

length width weight

2100 mm 35 mm 220 g

2100 mm 45 mm 280 g

item no.

540287

540288

Colltex Nylon CombiFix grip Built to withstand rough usage, this climbing skin from Colltex is produced in 100 % nylon for optimal durability and grip – excellently suited for wet and heavy snow. This skin features the CombiFix grip, allowing attachment at both tip and tail. We recommend waxing the skin to further enhance its performance.

length width weight

2100 mm 45 mm 340 g

2100 mm 60 mm 480 g

item no.

540289

540290

C O L LT E X

Colltex Mohair for excellent speed and grip This Colltex skin is produced in 100 % mohair for improved speed and outstanding grip. This is a skin with less friction than a nylon skin, although at the expense of nylon’s durability. It is possible to enhance this skin’s performance by waxing it.

length width weight

2100 mm 30 mm 190 g

2100 mm 45 mm 280 g

2100 mm 58 mm 380 g

item no.

541206

541207

541208

Colltex Mohair CombiFix grip This Colltex skin is produced in 100 % Mohair for improved speed and it secures sufficient grip. Compared to Nylon, the mohair skin has less friction, however it’s not as durable as Nylon. The combi fix makes it possible to secure the skin both in tip at tail, and is perfect for long-distance trips where you face the risk of ice/snow on the glue side of the skin. This skin must be adapted to your ski length.

length width weight

2100 mm 45 mm 340 g

2100 mm 58 mm 480 g

item no.

541209

541210

C O L LT E X

Colltex Mix CombiFix-feste This long nordic bc-skin from Colltex is produced in a mix of 65% Mohair and 35% Nylon for optimal glide, grip, and durability. Mohair is a material that has less friction compared to nylon and therefore glides better, but nylon has the most durability and water-repelling characteristics. The mix makes for the best of both worlds, and a good compromise. This skin comes with a CombiFix mount, which makes it possible to attach the skin to the tail of the ski. If you want even better performance, it pays to proof and wax the skins, which will provide better glide, reduced water uptake, and more durability. This skin is completely free of PFOA / PFC (fluorocarbons). Perfect for: • Falketind 62 Explore • Rabb 68 • NATO Combat • Ingstad / Tonje BC

length width weight

2100 mm 60 mm 340 g

item no.

541211

C O L LT E X

Adhesive Tube 75ml Maintenance glue for climbing skins Colltex 75 ml, adhesive tube for refreshing glue on your climbing skins. Use is described on product. Keep away from children. item no. 540301

Natural skin + skiwax 27g The wax that should always join you in your backpack The natural skin+ ski wax is a purely natural paraffin wax which completely decomposes in nature within a few days. The wax is perfect for snow temperatures from 0 to -30 degrees and air temperatures from +10 to -30 degrees. The ”rub-on-wax” is ideal for waxing the ski skins before the ascent to avoid the formation of clefts and ice. The ski can also be waxed with the natural wax before the descent. The wax application is preferably polished with a cloth. The wax is very economical and the can is closed with a screw cap. The packaging is recyclable. The natural skin+ ski wax is the compact care product in your backpack for use on the road. item no. 541360

Pk. size 12 pieces

C O L LT E X

Colltex Skin Sock Nylon The pro-skin sock made of high-quality synthetic is used to protect the adhesive layer of the ski skin. It is the alternative to the classic protective net. In wind and weather the pro-skin sock has the advantage that the adhesive side of the ski skin is less exposed to the weather by directly covering with the sock. Furthermore, the ski skin does not twist in the wind and it is avoided that one adhesive layer sticks to another. To dry the ski skin, remove it from the sock and pack it back in a dry state. If necessary, the pro-skin can be washed at 40 degrees. item no. 541354

Colltex Protectiv Net Protects the glue and makes for a easy handling of climbing skins Re-usable protective net for climbing skins. Prevents contamination of the adhesive surface of climbing skins, as well as for a easier handling of the skins in the field. Made for sticky climbing skins with hotmelt-glue, in particular. item no. 541353

Colltex Hotmelt Tape 4000x150mm Fast and easy renewal of the adhesive layer Climbing skins need new glue every now and then. And a well used skin is likely to be better than a new skin. With this tape roll of adhesives it is easy to lay new glue on your favorite skins with good results. Make sure you have removed all old skins and contamination before you iron on the new glue from this tape. The skins need to cool down and the glue needs to harden for 24 hours minimum before use. item no. 541359

C O L LT E X

Colltex Rubber Tip 45 mm No.8 Rubber tip for repairs and construction of Combifix skins with attachements both in the tip and the tail of the skins. This rubber tip is perfect for 45 mm wide BC ski skins. item no. 541356

Colltex Rubber Tip 60 mm No.5 Rubber tip for repairs and construction of Combifix skins with attachements both in the tip and the tail of the skins. This rubber tip is perfect for 60 mm wide BC ski skins. item no. 541357

Colltex Rubber Tip 60 mm No.7 Rubber tip for repair or construction of Combifix skins with attachment both in front and tail. This fixation fits skins up to 60 mm and wider skis such as Falketind and Rabb. item no. 541361

Colltex Quicktex When the glue on the skins start to wear out, the backcountry adventure can be saved with these patches in the backpack. Small 6 x 7,5 cm patches with glue to do in field repairs of the glue on your climbing skins. item no. 541358

Pk. size 10 pieces

C O L LT E X

asnes.com facebook.com/asnes1922 KUNDESENTER / SALES SUPPORT Tel: +47 56 51 98 00 post@activebrands.com #Asnes1922