Contact details
Telephone:.
Mobile/Cell:
e-mail:
e-mail:
e-mail:
Website.
Office:
John Paulding Associates
Unit 8A Hinxton Road, Duxford, Cambridgeshire
CB22 4SD
United Kingdom
john paulding Associates
https.johnpaulding.co.uk
617 - 631 Eastern Avenue, Ilford, Essex IG2 6PN
Telephone: 0208 554 2281 Fax: 0208 554 4828
e-mail: sales@burtonpower.com www.burtonpower.com
PRESS RELEASE
for immediate release
Burton’s Classic BDA-style Cam Cover for Ford Zetec
E Engine
It’s show season and this classic BDA-style black and silver cam cover for the Zetec E engine from Burton Power is sure to attract attention whenever the bonnet is lifted.
Burton also offers a multitude of accessories to facilitate the transplanting of a Zetec engine into a rear wheel drive classic or kit car so the BDA look would be totally appropriate for a classic Ford.
The BDA-styled cam cover can be ordered as part number FZ230 at £471.50 inc. VAT. The cam cover is supplied with bolts, gasket and a fitted breather tube with baffle plate.
To complement this item Burton also offers a BDA-style filler cap as part number FZ232 at £69.95 inc. VAT. for further details contact Burton Power on 0208 554 2281 www.burtonpower.com
617 - 631 Eastern Avenue, Ilford, Essex IG2 6PN
Telephone: 0208 554 2281 Fax: 0208 554 4828
e-mail: sales@burtonpower.com www.burtonpower.com
Burton’s Brand New Genuine Ford Engine Blocks for Ford 1500 Lotus Twin Cam/preX-flow and Kent 1600 Crossflow
Burton Power is now offering brand new Ford OHV Kent blocks explicitly for the 1500 Lotus Twin Cam and 1500 pre-crossflow engines in addition to another version specifically for the 1600 Kent Crossflow.
The blocks have been manufactured by Ford itself, using an all new grey iron casting that is stronger than the originals ever were.
The blocks feature: semi-finished cylinder bores to allow the engine to be built to desired clearances, reinforced lower bell housing bolt bosses, main bearing webs strengthened in critical areas and a centre main bearing machined to accept SOHC Pinto type upper and lower crankshaft thrust washers. Cam/jackshaft bearings are also included.
The Twin Cam/Pre-crossflow can be ordered as part number FL105 and the 1600 Kent block as part number FP105. Both versions retail at £3,600.00 inc. VAT. for further details contact Burton Power on 0208 554 2281 www.burtonpower.com
Mini Spares Centre Ltd.
Cranbourne Industrial Estate, Cranbourne Rd, Potters Bar, Herts EN6 3JN. United Kingdom
Telephone:- +44 1707 607700
Fax:-+44 1707 656786
e-mail:- sales@minispares.com www.minispares.com
PRESS RELEASE
Mini Spares Weighted Billet Alloy Gear Knobs
These might just look like gear knobs, but even these simple parts take hours of careful thought to perfect the design. The gear knobs have to feel right, look right and, most importantly, function right.
To enhance the feel of the shift action the knobs have been deliberately weighted to 156g. The diameter and overall size have been ergonomically determined and the product has been machined from 6082 T6 billet alloy prior to being vapour blasted which adds texture to the surface.
Two versions are available. The four speed version is available as part number BG8120, while the five speed version can be ordered as part number BG8121. Both feature an anodised black finish with recessed silver markings and each retails at £29.58 inc. VAT.
For more details contact Mini Spares on +44 1707 607700 or visit their website: www.minispares.com
Mini Spares Centre Ltd.
Cranbourne Industrial Estate, Cranbourne Rd, Potters Bar, Herts EN6 3JN. United Kingdom
Telephone:- +44 1707 607700
Fax:-+44 1707 656786
e-mail:- sales@minispares.com www.minispares.com
PRESS RELEASE
Mini Spares Authentic Classic Works Type
Lucas Spot Lamp With Rear Mounting Point
Lucas 5 3/4" spot lamps were used by nearly every Works Competition department on race and rally cars during the classic period.
Today, this quality reproduction from the Lucas Authentic Classic Range is as close as you will get to the classic original.
Everything about it is as the original. The spot lamp mounts via a single hollow bolt on the rear through which the wires pass. The mounting is adjustable to allow the lamp to be positioned correctly and the wires feature the original Lucas type bullet connections. The lamp is supplied complete with a bulb and can be ordered as part number WLR576 at £135.00 each inc. VAT.
For more details contact Mini Spares on +44 1707 607700 or visit their website: www.minispares.com
PRESS RELEASE
For immediate release
WEBCON UK LTD
Dolphin Road Sunbury, Middlesex TW16 7HE. United Kingdom Telephone: +44 (0) 1932 787100 Fax: +44 (0) 1932 782725
Global leaders in Engine Fuelling and Ignition Systems, Solutions and Spare Parts.
Webcon’s Cast DCNF Air Horn
Webcon is pleased to announce the introduction of a cast aluminium air horn for the Weber DCNF series of carburettors.
The air horn is suitable for most types of 40, 42 and 44 DCNF carburettor (except for the 40DCNF 12 and 13).
The new air horn comes complete with a cork gasket and mounting screws.
Order as part number 5284800100 at £72.15 plus VAT.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk
PRESS RELEASE
For immediate release
WEBCON UK LTD
Dolphin Road
Sunbury, Middlesex TW16 7HE. United Kingdom Telephone: +44 (0) 1932 787100 Fax: +44 (0) 1932 782725
Global leaders in Engine Fuelling and Ignition Systems, Solutions and Spare Parts.
Webcon 0-5 BAR Adjustable Pressure Insert
Adjusting the fuel pressure on an EFI system using an in‐rail regulator has traditionally involved replacing the original fixed rate pressure unit with a higher pressure fixed unit. Finding the optimum pressure meant having to experiment with different units, but now Webcon has a better answer.
Webcon part WFR060 is a superb quality, in‐rail, 0‐5 bar adjustable regulator that simply replaces the existing fixed pressure unit and allows the user to accurately set the pressure to the most suitable level.
Webcon part WFR060 is available from stock priced at £93.42 plus VAT. For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk
PRESS RELEASE
For immediate release
WEBCON UK LTD
Dolphin Road
Sunbury, Middlesex TW16 7HE. United Kingdom Telephone: +44 (0) 1932 787100 Fax: +44 (0) 1932 782725
Global leaders in Engine Fuelling and Ignition Systems, Solutions and Spare Parts.
Webcon Crank Position Sensor
For over forty years, the Weber Marelli crank sensor type SEN8D from Webcon has been the benchmark in terms of outstanding performance and an unbeatable price. However, as of November 2019 production in Italy ceased so they are now no longer available.
Webcon is now delighted to announce that, following extensive testing, it has sourced a superb quality replacement for the SEN8D and these are now available for immediate delivery.
The sensor is branded ‘Webcon’ to avoid confusion with non-Webcon-approved, unbranded versions and is available under a new part number: WSS075W.
Just like its predecessor it is extremely competitively priced at just £41.83 plus VAT.
For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk