Contact details
Telephone:.
Mobile/Cell:
e-mail:
e-mail:
e-mail:
Website.
Office:
John Paulding Associates
Unit 8A Hinxton Road, Duxford, Cambridgeshire
CB22 4SD
United Kingdom
john paulding Associates
https.johnpaulding.co.uk
617 - 631 Eastern Avenue, Ilford, Essex IG2 6PN
Telephone: 0208 554 2281 Fax: 0208 554 4828
e-mail: sales@burtonpower.com www.burtonpower.com
Burton’s High Pressure Oil Pump
Ford SOHC Pinto & Escort Cosworth T25
Burton Power is now offering a high pressure oil pump for use on Ford SOHC Pinto and Ford Cosworth YB 16v Turbo engines.
The pump will increase pressure by around 25%, which is approximately 75-80 psi.
The pump is ideal for modified or racing engines or for enthusiasts who just want some extra protection for their engine. The pumps are made exclusively for Burton to the usual quality that Burton demands. Fitment is straightforward, but a new drive shaft (part no. FT1057- £9.95 inc. VAT) will also be required.
Order the oil pump as part number FT1055 at just £39.95 inc. VAT. for further details contact Burton Power on 0208 554 2281 www.burtonpower.com
617 - 631 Eastern Avenue, Ilford, Essex IG2 6PN
Telephone: 0208 554 2281 Fax: 0208 554 4828
e-mail: sales@burtonpower.com www.burtonpower.com
Burton’s Raceline Water Rail for Ford Zetec E RWD conversion
The Ford Zetec is now well established as a popular engine for transplanting into earlier rear wheel drive Fords, as well as other makes and models, and Burton Power can offer numerous parts to make this operation feasible.
One such item is the Raceline Water Rail. Water rails are designed to simplify the cooling system and plumbing of the engine when installed in-line in an RWD car. The Zetec engine has water outlets at the back of the head, which in most RWD applications, foul the bulkhead if the original outlet housings are retained. The water rail is designed with a narrow profile and transfers this outlet to the front of the engine so that the plumbing is simpler and neater. Water outlet is via an X/flow thermostat housing which is also available from Burton Powe; as is a dedicated fitting kit.
Raceline Water Rail Ford Zetec E RWD conversion (Suitable for both Silver and Black Top applications) Part Number: FZ470 - £294.00 inc.VAT
Also available:
• Fitting Kit - Part Number FZ471- £14.50 inc.VAT
• Standard X/flow thermostat housing - Part Number FP610 - £51.50 inc.VAT or ...
• Special X/flow thermostat housing - Part Number FP610M - £93.60 inc.VAT
(This has: a ‘take off’ for easy bleeding of air locks, a facility for a fan switch to be added and a lower profile than standard for improved clearance).
for further details contact Burton Power on 0208 554 2281 www.burtonpower.com
Mini Spares Centre Ltd.
Cranbourne Industrial Estate, Cranbourne Rd, Potters Bar, Herts EN6 3JN. United Kingdom
Telephone:- +44 1707 607700 Fax:-+44 1707 656786
e-mail:- sales@minispares.com www.minispares.com
PRESS RELEASE
Mini Spares Silicone Rocker Cover Gasket for 9 Stud Head ‘A’ Series Engines
Generally, when a rocker cover is removed the gasket should be replaced prior to refitting the cover as the old flattened gasket will probably no longer seal properly. However, the upgraded Silicone Rocker Gasket from Mini Spares springs back into shape so that (if refitted properly) the seal is as good as new. The silicone gasket is ideal for race cars, etc where the rocker cover is removed on a regular basis. Mini Spares has fitted one on its 1380cc engine road car with great results.
Order as part number GUG705009EVO at £10.08 inc. VAT
In rare cases longer rocker cover bolts may be required. Mini Spares stocks these as part number CAM6823 at £4.20 inc. VAT each.
For more details contact Mini Spares on +44 1707 607700 or visit their website: www.minispares.com
Mini Spares Centre Ltd.
Cranbourne Industrial Estate, Cranbourne Rd, Potters Bar, Herts EN6 3JN. United Kingdom
Telephone:- +44 1707 607700
Fax:-+44 1707 656786
e-mail:- sales@minispares.com www.minispares.com
PRESS RELEASE
Mini Electric Radiator Fan
for late carburettor classic Minis and single point injection models
Mini Spares now has stocks of the radiator electric fan that was fitted as standard on Minis with the large round hole cut out in the inner wing. These models include the last carburettor equipped versions manufactured from 1991, as well as the single point injection models.
The fan can be ordered as Part Number PGG10058 at £171.00 inc. VAT.
For more details contact Mini Spares on +44 1707 607700 or visit their website: www.minispares.com
Mini Spares Centre Ltd.
Cranbourne Industrial Estate, Cranbourne Rd, Potters Bar, Herts EN6 3JN. United Kingdom
Telephone:- +44 1707 607700
Fax:-+44 1707 656786
e-mail:- sales@minispares.com www.minispares.com
PRESS RELEASE
Mini Spares Uprated Oil Pressure Switch
A sudden loss of oil pressure can destroy an engine in seconds. The standard 7lb oil pressure switch fitted to classic Minis often gives the warning too late to save the engine.
Mini Spares new uprated 20lb oil pressure switch activates the warning light when the oil pressure drops to 20lbs giving the driver precious extra seconds to shut down the engine.
The Mini Spares uprated 20lb oil pressure switch can be ordered as part number HPS1.
At just £26.92 inc. VAT it’s a small price to pay to protect your engine.
For more details contact Mini Spares on +44 1707 607700 or visit their website: www.minispares.com
PRESS RELEASE
For immediate release
WEBCON UK LTD
Dolphin Road
Sunbury, Middlesex TW16 7HE. United Kingdom Telephone: +44 (0) 1932 787100 Fax: +44 (0) 1932 782725
Global leaders in Engine Fuelling and Ignition Systems, Solutions and Spare Parts.
Webcon Heat Shield for DCOE & DCO/SP Carburettors
Webcon now manufactures a heat shield for use on the Weber DCOE and DCO/SP range of carburettors.
On non-crossflow engines the carburettors are directly above the exhaust manifold. When exhaust heat rises up it can cause fuel handling problems in sidedraft carburettors. The new Webcon Heat Shield helps alleviate these problems by deflecting the heat around the carburettor.
The new Webcon Heat Shield is superbly made in the UK from 1.6mm Stainless Steel.
Part number 9990398700 is stamped with the Webcon logo to easily distinguish it from the thinner, less effective copies on the market.
The new Webcon Heat Shield retails at £22.39 plus VAT. One heat shield is required per carburettor.
Available directly from Webcon and from appointed Webcon dealers around the world. For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk
PRESS RELEASE
For immediate release
WEBCON UK LTD
Dolphin Road Sunbury, Middlesex TW16 7HE. United Kingdom Telephone: +44 (0) 1932 787100 Fax: +44 (0) 1932 782725
Global leaders in Engine Fuelling and Ignition Systems, Solutions and Spare Parts.
Webcon ‘A’ Series Crossflow Aluminium Cylinder Heads
Webcon is delighted to announce that the ‘A’ Series Crossflow Aluminium Cylinder Heads are back in stock.
Production was halted in early 2017 due to a problem at the foundry that casts them. The tooling has been moved to a new, state of the art facility and these unique heads are once again being produced.
The ‘A’ Series Aluminium Crossflow Head allows fitment of a pair of Weber 40DCOE carburettors, or DCOE style throttle bodies and is the ultimate upgrade for all versions of the legendary ‘A’ Series engine.
Heads are available as below: 9900384900 Bare head c/w valve seats and guides
£1,963.85 plus VAT 9900384900AS Assembled head c/w valves and springs £2,180.62 plus VAT
Available directly from Webcon and from appointed Webcon dealers around the world. For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk
WEBCON UK LTD
Dolphin Road
Sunbury, Middlesex TW16 7HE. United Kingdom Telephone: +44 (0) 1932 787100 Fax: +44 (0) 1932 782725
Global leaders in Engine Fuelling and Ignition Systems, Solutions and Spare Parts.
Email for Sales enquiries sales@webcon.co.uk
For Alpha technical enquiries alpha@webcon.co.uk
For technical enquiries technical@webcon.co.uk
PRESS RELEASE
Webcon Fuel Line Pressure Relief Kit
for carburettor equipped cars without a return fuel line
Bad hot starting can be the result of a build-up of pressure in the fuel feed line of a carburettor equipped car which causes flooding of the carburettor either during hot soak or whilst cranking.
Some manufacturers addressed this problem by fitting a fuel return line to the tank. However, this is a cumbersome solution for owners of cars without this feature as it involves making irreversible modifications to the car. Thankfully Webcon has the answer.
Webcon’s Fuel Line Pressure Relief Kit consists of extra fuel hose, clips and two tee pieces, (one with a valve and one without) to provide a by-pass loop in the feed pipe which then bleeds excess pressure build up from the system.
Installation involves just cutting the fuel feed pipe before and after the fuel pump and inserting the by-pass hose via the tee pieces. Solving a hot starting problem really is as simple as that. The kit contains a length of fuel hose, six hose clamps, two tee pieces and illustrated instructions. The kit is available with 8mm i.d. hose (Part HSK001) or 6mm I.D. hose (Part HSK002) and retails at £26.90 plus VAT.
Available directly from Webcon and from appointed Webcon dealers around the world. For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk