How A Drill Press Chuck Guard And Device Protects The Operator To cut holes or drill into metal or wood, electrically powered drill presses employ a rotating boring bit. When cutting, the holes can go totally through or to a pre-set depth. Two of the very best ways to safeguard a drill press are by using a drill press chuck guard and a device onto it. The most basic definition of how a guard protects a worker is that it provides a physical barrier to danger zones. The way a device functions is it interrupts the machine’s operating cycle to prevent a worker from being able to reach or enter dangerous areas. To assure protection, both varieties of safety guards must be designed and installed onto every drill press in the workplace. More on How a Guard Functions A physical barrier that encloses dangerous machine parts and blocks operators from being in contact with these hotspots is how a drill press chuck guard should be viewed. To function, a guard has to be strong and secure. Tampering, removal or bypass should not be possible. In order to prevent tampering, a guard ordinarily requires a certain type of tool to unfasten and remove it. The creation of an extra hazard between the guard and other parts of the machine also must be avoided. In addition, it shouldn't obstruct the worker's view or prevent the person from doing his or her job. Understanding Safeguarding Devices The prevention of the operator from coming into contact with the point of operation is the primary purpose of a device. A device can be used as a supplemental control when guarding on its own does not fully take care of the hazard. In some instances, it can also be used in place of a guard. More specifically, a safeguarding device prevents the worker from reaching into the point of operation, interrupts the machine’s cycle if the worker’s hands are at the point of operation, and will withdraw his or her hands if located in or near the point of operation. Specific Guidelines to Help Ensure Workers’ Safety Guards must be installed over the motor as well as on pulleys and belts. Cover unused parts of the chuck and bit above where the material is being worked on using adjustable guards. Projecting chunks should be replaced; once replaced, set them utilizing non-projecting, safety-bit set screws and chucks. Be sure to cover operator controls in order to ensure that the drill press can't be accidentally switched on. Safety measures for drill press operations should be developed and executed. To ensure compliance, perform regular inspections. Until you are sure they can operate the machines safely by themselves, continue to train and supervise all workers. When operating a drill press, operators should never wear loose-fitting clothes, jewelry or gloves and hair should be secured under a hat or net; make sure to tell them this. In addition, workers should secure the material to the drill press bed with well-fitting clamps prior to starting the machine. This is to make sure that the material will not spin out and strike the operator. If in the process of drilling holes, operators must also not manually secure the material to
ATSSafety.com
Page 1