Page 1

En

gl

is

h


ROPES beal

LIFETIME process unicore

technology for your security

DURABILITY OF ROPES The durability of a rope depends above all on the way it is used, but also on numerous technical factors: The quality of yarn used ; the compactness of the rope ; its suppleness ; the braiding of the filaments of the sheath ; their twist ; their number ; the number of braids… One other factor plays a particularly important role: the thickness of the sheath. You can check the quantity of sheath in BEAL ropes thanks to the percentage shown at the side of this pictogram.

An astonishing process, bonding rope sheath and core without affectingthe rope’s suppleness. Even in the hardest conditions of use sheath slippage is suppressed. If the sheath is cut or torn, core and sheath remain bonded together. With a standard rope, if the sheath is cut by abrasion over an edge, a frequent occurrence in work at height and in rescues, it slides andgathers over some metres. It then becomes impossible to pass this zone, either to ascend or to descend. If the problem occurs near to the end of the rope the sheath may slide off completely, and the user fall to the ground. With the UNICORE process the sheath remains in place and the user may escape, either by descent or ascent, taking all necessary precautions. He/she is not stuck without a solution on the rope.

L IFETIME OF BEAL METALLIC PPE The lifetime of metal PPE is not limited. Attention :

Bonded core and sheath

The UNICORE process brings an undeniable gain in security during delicate and dangerous operations ; its advantages are many:

Classical rope

Classical rope

Classical rope

Classical rope

This is the potential lifetime in use. A metal item of PPE may be destroyed during its very first use. It’s inspection and control which determine if the product must be scrapped earlier. Between uses, appropriate storage is essential.

L ifetime of BEAL plastic and textile PPE 5 YEARS STORAGE TIME In good storage conditions plastic and textile BEAL PPE may be stored for up to 5 years before first use, without affecting their future lifetime in use.

10 YEARS LIFETIME IN USE It allows escape if the sheath has been cut.

It allows temporary cutting of rope lengths with a knife, without melting the ends, without fraying of the sheath.

It prevents sheath slippage.

It reduces shrinkage in water by more than 50 %.

The potential lifetime of plastic and textile BEAL PPE in use is up to a maximum of 10 years.

15 YEARS LIFETIME

vidEo JOKER 9,1 mm Unicore Test

The maximum lifetime of plastic and textile BEAL PPE is up to 15 years. Lifetime = Time in storage + time in use.

summary ROPES ROPES FOR DIFFICULT AREA ACCESS . . . . . . . . . . . . . . . . . p. 4 à 6 Universal rope to both Standards . . . . . . . . . . . . . . . . . p. 7 floating rope. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 7 RESCUE ROPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 8 ROPES RESISTANT TO HIGH TEMPERATURES. . . . . . . . . . . . . . . p. 9 ROPES RESISTANT TO CHEMICAL PRODUCTS . . . . . . . . . . . . . p. 10 LIGHTWEIGHT ROPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 11 SPECIAL ROPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 11 ROPES FOR TREE WORK . . . . . . . . . . . . . . . . . . . . . . . . . p. 12 à 13 INTERVENTION ROPES . . . . . . . . . . . . . . . . . . . . . . . . . . p. 14 à 15 Intervention FAst ROPEs . . . . . . . . . . . . . . . . . . . . . . . . . . . p.16

LANYARDS FALL ARREST LANYARDS . . . . . . . . . . . . . . . . . . . . . . . . p. 18 à 19 DYNAMIC LANYARDS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 20

HARNESS FALL ARREST, ROPE ACCESS AND WORK POSITIONING . . p. 22 à 23 WORK POSITIONING AND ROPE ACCESS. . . . . . . . . . . . . p. 24 à 25 FALL ARREST AND WORK POSITIONING. . . . . . . . . . . . . . . . . . p. 26 Life jacket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 27 FALL ARREST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 28 à 29

HELMET WORK AT HEIGHT, RESCUE AND FOR INDUSTRY . . . . . . . . . . . p. 30

Metal LOCKING CONNECTOR. . . . . . . . . . . . . . . . . . . . . . . . . . p. 32 à 33 twin gate LOCKING CONNECTOR. . . . . . . . . . . . . . . . . . . . . p. 34 PULLEY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 36 à 37 RIGGING PLATES AND SWIVEL . . . . . . . . . . . . . . . . . . . . . . . . p. 37 FALL ARREST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 38 ROPE CLAMPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 39 DESCENDER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 40 ladderS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 41

PACKS bagS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 42 à 45

WORK STATION . . . . . . . . . . . . . . . . . . SLINGS / ANCHORS

SLINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 50 ACCESSORY CORDS AND WEBBING . . . . . . . . . . . . . . . . . . . . p. 51

ROPE PROTECTORS . . . . . . . . . . . . Lifetime in use The potential lifetime of plastic and textile BEAL PPE in use is up to a maximum of 10 years.

Comparative test of resistance ACCESS 10,5 mm UNICORE https://www.youtube.com/watch?v=CtURlhPssQI

Attention :

This is the potential lifetime in use. An item of PPE may be destroyed during its very first use. It’s inspection and control which determine if the product must be scrapped earlier. Between uses, appropriate storage is essential.

p. 46 à 49

p. 52 à 53

KITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

p. 54

Gloves & ACCESSORIES . . . . . . .

p. 55

LIGHTING Headlamps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 58 à 63 lanternS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 64

1


services

services

customization

identification IDN

Unique number

Year of manufacture

All BEAL PPE is marked with a unique number which, in addition to providing the year of manufacture, ensures traceability of the product.

BCC

NFC

idN

Near Field Connection

NFC is a new standard in RFID chips, ultra compact and flat, compatible with most new generation Smartphones. By bringing your phone close to the NFC chip, information relating to the item of PPE can be accessed directly and wirelessly without the need for specific software, similar to wireless payments which are already becoming commonplace. All PPE equipped with a TIP label can accommodate a NFC chip to allow kit management via smartphone.

Beal Color Code

It is possible, through special order, to personalise certain helmets, harnesses and BEAL bags with your company’s logo or other information required for your activities. This personalisation can be made to be reflective to provide additional safety. www.beal-pro.com

BEAL slings, pre-cut ropes and lanyards are either embroidered or have a line of stitching which -dependant on the colour useddepicts the year of manufacture of the product.

TIP

Traceability, Identification, Personalisation The colour of the internal thread identifies the year of manufacture.

Harnesses, lanyards, energy absorbers, ropes with sewn terminations are supplied with a TIP label (traceability, identification and personalisation). TIP allows you to identify an item by writing your name and personalising the unique number of your PPE. The TIP also has a QR code and web link to instantly access the item’s logbook online, promoting its management. It equally allows for a new generation RFID chip, called NFC, to be stuck to the label as an add-on.

NFC

your logo here

SHARE

PPE MANAGEMENT

STORE

www.beal-inspect.com is a PPE management website. By using responsive technology from whichever phone, tablet or computer (connected to the internet) it is able to store logbooks, your documents as well as user instructions in the ‘cloud’ and to share these between terminals.

ALERT

HELMET

Regardless of the make of your PPE, you can log all inspections, become notified of their forthcoming inspections and share information between terminals (smartphone, tablet, PC and Mac) as well as other people who have been given authorisation.

ROPE

REGISTER SAVE

LOOK UP / SHARE

HARNESS

CONNECTOR

NFC

012 34

2

567 14

3


ROPES FOR DIFFICULT AREA ACCESS

industrie 10,5 mm

Per fo r m a n c es

UNICORE

Thanks to the UNICORE Process, Access ropes reach a new level in security. In effect, the UNICORE Process integral to this 10.5 mm rope will secure most delicate operations, whilst retaining lightness and flexibility.

Type Weight per metre Breaking load % of the sheath Strength with sewn terminations

EN 1891 -

A

This rope is specially adapted to the requirements of work at height companies.

Standard CE

Breaking load

3000 daN (kg)

EN 1891 -

38 %

OPTION Sewn terminations

2400 daN (kg)

Access 11 mm

EN 1891

Ref. blue: BCSA105.100.B (100m) / BCSA105.200.B (200m) / BCSA.105.500.B (500m) orange: BCSA105.100.O (100m) / BCSA105.200.O (200m) / BCSA.105.500.O (500m)

Type Weight per metre Breaking load % of the sheath

EN 1891 -

Strength with sewn terminations

A

An ideal rope with no diameter restrictions for security in work at height.

3200 daN (kg)

OPTION Sewn terminations

2400 daN (kg) EN 1891

antipodes 10,5 mm Very tough, this is the established standard rope for work at height. Same construction as the INDUSTRIE 10.5 mm.

Weight per metre Breaking load % of the sheath

EN 1891 -

Strength with sewn terminations Standard CE

antipodes 11,5 mm Great abrasion resistance for the most demanding applications.

Type

Breaking load % of the sheath Strength with sewn terminations Standard CE

4

Ref. white with sewn termination: BCSI11.10TERM (10m) / BBCSI11.20TERM (20m) / BCSI11.30TERM (30m) / BCSI11.40TERM (40m) / BCSI11.50TERM (50m) / BCSI11.60TERM (60m) red with sewn termination: BCSI11.10TERM.R (10m) / BCSI11.20TERM.R (20m) / BCSI11.30TERM.R (30m) / BCSI11.40TERM.R (40m) / BCSI11.50TERM.R (50m) / BCSI11.60TERM.R (60m)

A

An ideal work at height rope when a large rope diameter is required for greater security.

Strength with sewn terminations Standard CE

2400 daN (kg)

OPTION Sewn terminations

Ref. white: BCS105.50 (50m) / BCS105.100 (100m) / BCS105.200 (200m) / BCS105.500 (500m)

Type

Strength with sewn terminations Standard CE

contract 10,5 mm

A

Type A rope with the optimum balance quality/ price.

Type

Breaking load

3400 daN (kg)

% of the sheath

38 %

Strength with sewn terminations

2600 daN (kg) Ref. white: BCS115.100 (100m) / BCS115.200 (200m) red: BCS115.200.R (200m)

EN 1891 -

3000 daN (kg) 38 % 2400 daN (kg) EN 1891

Ref. white: BCSI105.50 (50m) / BCSI105.100 (100m) / BCSI105.200 (200m) / BCSI105.500 (500m) red: BCSI105.50.R (50m) / BCSI105.100.R (100m) / BCSI105.200.R (200m) / BCSI105.500.R (500m) blue: BCSI105.100.B (100m) / BCSI105.200.B (200m)

A 73 g 3200 daN (kg) 36 % 2400 daN (kg) EN 1891

Ref. white: BCSI11.50 (50m) / BCSI11.100 (100m) / BCSI11.200 (200m) / BCSI11.500 (500m) red: BCSI11.50.R (50m) / BCSI11.100.R (100m) / BCSI11.200.R (200m) / BCSI11.500.R (500m) blue: BCSI11.50.B (50m) / BCSI11.100.B (100m) / BCSI11.200.B (200m) / BCSI11.500.B (500m) orange: BCSI11.100.O (100m) / BCSI11.200.O (200m)

A 94 g 4200 daN (kg) 34 % 3000 daN (kg) EN 1891

Ref. white: BCSI12.200 (200m) / red: BCSI12.200.R (200m)

Performances

Weight per metre

78 g

65 g

Performances

% of the sheath

EN 1891 -

38 %

EN 1891

% of the sheath

Breaking load

3000 daN (kg)

EN 1891

Type

Weight per metre

65 g

A

Performances

industrie 12 mm

Per fo r m a n c es

Weight per metre

EN 1891 -

Ref. red: BCSA11.100.R (100m) / BCSA11.200.R (200m) / BCSA11.500.R (500m) yellow: BCSA11.100.Y (100m) / BCSA11.200.Y (200m) / BCSA11.500.Y (500m)

Per fo r m a n c es

Type

Standard CE

Breaking load

EN 1891 -

36 %

Sewn terminations

Strength with sewn terminations

Weight per metre

73 g

OPTION Standard CE

Ref. white with sewn termination: BCSI105.10TERM (10m) / BCSI105.20TERM (20m) / BCSI105.30TERM (30m) / BCSI105.40TERM (40m) / BCSI105.50TERM (50m) / BCSI105.60TERM (60m)

% of the sheath

industrie 11 mm

Per fo r m a n c es

UNICORE

With UNICORE as standard, bonding core and sheath for maximum security in all situations.

Type Weight per metre

65 g

OPTION Sewn terminations

Performances

ROPES

Access 10,5 mm

ROPES FOR DIFFICULT AREA ACCESS

Standard CE

A 66 g 2500 daN (kg) 39 % 2200 daN (kg) EN 1891

Ref. white: B CS105C.20 (20m) / BCS105C.30 (30m) / BCS105C.40 (40m) / BCS105C.50 (50m) / BCS105C.60 (60m) / BCS105C.80 (80m) / BCS105C.100 (100m) / BCS105C.200 (200m) / BCS105C.500 (500m)

5


ROPES FOR DIFFICULT AREA ACCESS

A rope particularly resistant to abrasion due to its higher percentage of sheath.

Type Weight per metre Breaking load % of the sheath

EN 1891 -

Strength with sewn terminations OPTION

Standard CE

A 64 g 2600 daN (kg) 44 % 2200 daN (kg) EN 1891 Ref. white: BCSPW105.200 (200m)

Sewn terminations

Per fo r m a n c es

north sea 11 mm Type

Specially developed in collaboration with one of the principal oil companies for use in difficult conditions on oil rigs. Great handling and maximum durability.

Security rope which conforms to 2 standards, both the semi-static and the dynamic rope standards. It’s thus a classic semi-static rope well adapted to various types of work on ropes, to rescue, and to tactical applications. In event of a very violent fall an internal Vectran ‘fuse’ will rupture, and the rope then becomes dynamic, with all the security that characterises dynamic ropes. The fuse will rupture under a force of around 3 kN. In addition, DYNASTAT resists a fall factor 1 drop holding 100 kg over a sharp metal edge of 0.75 mm radius. Ideal for delicate operations at height, pylon climbing, clock towers, rescue and fast technical intervention.

Performances

Type Weight per metre Breaking load % of the sheath Strength with sewn terminations Standard CE

A 75 g 2500 daN (kg) 44 % 1900 daN (kg) EN 892 EN 1891

A Strong points

Weight per metre Breaking load % of the sheath

EN 1891 -

DYNASTAT 10,5 mm

Per fo r m a n c es

ROPES

top work 10,5 mm

Uni versal rope to both Standards EN 892 & EN 1891

Strength with sewn terminations

• Semi-static

and dynamic rope giving security in a wide range of circumstances. • Very low stretch of just 2 % in use. • Semi-static rope that does not shrink, and thus doesn’t stiffen up. • A rope that’s supple, with very agreeable handling.

75 g 2800 daN (kg) 44 %

EN 892 + EN 1891 OPTION Sewn terminations Ref. black & yellow: B CDS105.50 (50m) / BCDS105.60 (60m)

2200 daN (kg)

OPTION Sewn terminations

Standard CE

EN 1891 Ref. white: BCSPW11.200 (200m)

DYNAMICS ROPES

TOP GUN II 10,5 mm

floating rope

pro water 11 mm

Per fo r m a n c es

UNICORE

Dynamic ropes cushion impacts and must be used during certain procedures to absorb the energy of possible falls.

UNICORE Type Weight per metre Breaking load % of the sheath

EN 892 -

Strength with sewn terminations

68 g 2100 daN (kg) 40 % 1700 daN (kg)

OPTION Standard CE

EN 892

Sewn terminations

apollo 11 mm Dynamic ropes cushion impacts and must be used during certain procedures to absorb the energy of possible falls.

Type Weight per metre Breaking load % of the sheath Standard CE

A

Neopren Core

80 g 2500 daN (kg)

UNICORE

33 % EN 1891

EN 1891 -

Sheath

Ref. orange: B CSW11.100 (100m) / BCSW11.200 (200m)

Type Weight per metre

% of the sheath Standard CE

6

Ref. green: BC105T.50.G (50m) / BC105T.60.G (60m) / BC105T.70.G (70m) / BC105T.200.G (200m) blue: BC105T.50.B (50m) / BC105T.60.B (60m) / BC105T.70.B (70m) / BC105T.200.B (200m)

Floating type A semi-static rope for work at height above water (off-shore wind farms, oil rigs). It can also be used for swift water rescues. A new patented technique allows PRO WATER 11 mm to become the first floating semi-static type A rope on the market. Thanks to limited shrinking in water, its suppleness is maintained and knots remain easy to tie. In case of an operative falling into water, boat based emergency services can easily see this orange rope which, because of its floatability, is unlikely to get tangled in propellers. PRO WATER rope benefits from all the advantages of UNICORE technology thus giving it a real increase in security.

Per fo r m a n c es

Breaking load

EN 892 -

Performances

75 g 2300 daN (kg) 35 % EN 892 Ref. red: B C11A.50.R (50m) / BC11A.60.R (60m) / BC11A.200.R (200m) anise: B C11A.50.A (50m) / BC11A.60.A (60m) / BC11A.200.A (200m)

7


ROPES RESISTANT TO HIGH TEMPERATURES

rescue 10,5 mm Semi-static type A rope with a polyester sheath. Its fluorescent orange colour make it particularly suited for use in rescues.

Per fo r m a n c es

Type Weight per metre Breaking load % of the sheath

EN 1891 -

EFFECT OF HIGH TEMPERATURES ON ARAMID

Strength with sewn terminations

The resistance of Aramid to high temperatures is best illustrated by the graph illustrating the residual strength after exposure to raised temperatures. Thus we may for example see that after 10 hours of exposure at 200° C it retains 100 % of its strength, or that after 1 hour at 350° C it retains 90 % of its strength.

A 65 g 3000 daN (kg) 38 %

TEST WITH BLOWTORCH

2400 daN (kg)

Semi-static rope holding a mass of 100 kg exposed to a temperature of 400° C (+ or- 50° C) for 15 minutes:

OPTION Standard CE

EN 1891

Sewn terminations

Ref. orange: B CSR105.200 (200m)

rescue vls 11,3 mm The Rescue VLS is a very low stretch rope designed for technical rope rescue. VLS for Very Low Stretch. Elongation 50-150kg : 0,8%

Breaking load % of the sheath Strength with sewn terminations

CE / NFPA 1983 -

Standard NFPA OPTION

43 %

Weight per metre

Warning

The reflective yarn is very fragile and wears rapidly when subjected to abrasion, although it maintains its reflective properties. Its wear does not affect the rope’s strength..

Breaking load % of the sheath Strength with sewn terminations

EN 1891 OPTION

Conforms to the main requirements of the NFPA 1983-2012 standard

Sheath Aramid

8

Weight per metre Breaking load % of the sheath Standard CE

Core

Breaking load

Strength with sewn terminations

EN 1891 -

Standard CE

Neopren Core

2500 daN (kg)

UNICORE

The thickness of the sheath of RAIDER TACTIC has been reduced and the quantity of the core increased Sheath Aramid Core to allow it to be certified as a Type A rope .

Sheath Aramid

Core

Sheath

81 g 2600 daN (kg) 41 % 2200 daN (kg) EN 1891

Performances

Type Weight per metre Breaking load

Strength with sewn terminations

EN 1891 Aramid

Ref. orange: B CSW11.100 (100m) / BCSW11.200 (200m)

B

Ref. black: B CSK11R.200 (200m)

% of the sheath

33 % EN 1891

EN 1891

Sewn terminations

raider tactic 11 mm

80 g

2200 daN (kg)

OPTION

EN 1891

EN 1891 -

Type

% of the sheath

A

32 %

Performances

37 %

Per fo r m a n c es

Type

2300 daN (kg)

Ref. black: B CSK105R.200 (200m)

Weight per metre

UNICORE

Floating type A semi-static rope for work at height above water (off-shore wind farms, oil rigs). It can also be used for swift water rescues. A new patented technique allows PRO WATER 11 mm to become the first floating semi-static type A rope on the market. Thanks to limited shrinking in water, its suppleness is maintained and knots remain easy to tie. In case of an operative falling into water, boat based emergency services can easily see this orange rope which, because of its floatability, is unlikely to get tangled in propellers. PRO WATER rope benefits from all the advantages of UNICORE technology thus giving it a real increase in security.

Standard CE

67 g

2800 daN (kg)

69 g

OPTION

Semi-static Type B rope with an Aramid sheath capable of withstanding a long period close to a major source of heat.

3000 daN (kg)

B

Sewn terminations

Ref. yellow Fluorescent: B CSRR105.200 (200m)

pro water 11 mm

Breaking load

raider 11 mm

A

Sewn terminations

Type

Strength with sewn terminations

EN 1891 Aramid

Relationship between time of exposure at high temperature and residual strength of Aramid.

Performances

% of the sheath

2800 daN (kg)

Aramid Standard CE

Core

Sheath Aramid

Per fo r m a n c es

Type

The rope supports a 100 kg mass. It is held clear of a 25 mm bar heated red-hot. It is released against the bar and the time to rupture measured. Results: • Classic 11 mm rope: 3 seconds • HOTLINE 11 mm: 5 seconds • RAIDER TACTIC 11 mm: 8 seconds • RAIDER 11 mm: 18 seconds

Weight per metre

3600 daN (kg)

Ref. yellow Fluorescent: B CSR113.200.Y (200m) / black: B CSR113.200.BK (200m)

ReactivE 10,5 mm A specialist rope for rescues in low light conditions. Highly visible as soon as a light source is pointed towards it thanks to a reflective yarn that is woven through the sheath.

Semi-static Type B rope with an Aramid sheath capable of withstanding a long period close to a major source of heat.

94 g

Sewn terminations

TEST AGAINST A RED HOT BAR

raider 10,5 mm

Per fo r m a n c es

Weight per metre

Results: • Classic 11 mm rope: Break after around 40 seconds. • RAIDER 11 mm rope: Residual strength around 1500 daN after 15 minutes. • RAIDER TACTIC 11 mm rope: residual strength around 1000 daN after 15 minutes.

ROPES

RESCUE ROPES

OPTION Sewn terminations

Standard CE

A 75 g 2400 daN (kg) 30 % 2200 daN (kg) EN 1891 Ref. black: B CSK11RT.200 (200m)

9


ROPES RESISTANT TO CHEMICAL PRODUCTS

LIGHTWEIGHT ROPES

CHEMICAL RESISTANCE OF ARAMID YARN

ROPES

ANTIPODES 9 mm

(exposure for 100 hours) ACIDS

Residual Tenacity in %age

BASES

Residual Tenacity in %age

Other Chemical Products

Residual Tenacity in %age

Hydrochloric 20 % at 20° C

98 %

Soda 10 % at 95° C

75 %

Petrol / Gas

98 %

Nitric 10 % at 20° C

99 %

Wet cement at 95° C

93 %

Benzene

98 %

Sulphuric 20 % at 95° C

93 %

Ammonia at 20° C

100 %

Methyl Ethyl Cetone

97 %

Sulphuric 40 % at 95° C

89 %

Ethylene Glycol

94 %

Acetic 40 % at 95° C

97 %

Phenol

95 %

Formic 90 % at 95° C

82 %

Sea water

100 %

Semi-Static type B rope, ultra light, but necessitating great care during use.

Ref. white: BCS09.100 (100m) / BCS09.200 (200m) red: BCS09.100.R (100m) / BCS09.200.R (200m)

Performances

EN 1891 Type Weight per metre Breaking load

HOTLINE 11 mm Semi-static rope with an interior sheath in Aramid, covered by a classic sheath. HOTLINE rope allows access in the presence of certain dangerous chemicals.

Core Type Weight per metre

% of the sheath

Aramid

A

Aramid Breaking load

EN 1891 -

% of the sheath

Per fo r m a n c es

Strength with sewn terminations

79 g

Standard CE

9 mm : B 10 mm : A 9 mm : 51 g 10 mm : 62 g 9 mm : 1900 daN (kg) 10 mm : 2400 daN (kg) 43 % EN 1891

ANTIPODES 10 mm The lightest of the type A ropes with a margin of security sufficient for some industrial uses.

2500 daN (kg)

Ref. white: BCS10.100 (100m) / BCS10.200 (200m) red: BCS10.100.R (100m) / BCS10.200.R (200m)

42 %

Sheath

EN 1891 -

2200 daN (kg)

OPTION Standard CE

EN 1891

Sewn terminations

Ref. white: BCSK11.200 (200m)

raider 11 mm Type Weight per metre

Sheath Aramid

australis 11,5 mm

Per fo r m a n c es

Semi-static Type B rope with an Aramid sheath capable of withstanding a long period close to a major source of heat.

Core

Breaking load % of the sheath

SPECIAL ROPES

B

Specially developed to meet the requirements of Australian standard AS4143.3, this very low stretch rope has a sheath in polyester and is constructed like the American ropes.

81 g 2600 daN (kg)

Performances

Type Weight per metre Breaking load

41 %

% of the sheath

93,7 g 3490 daN (kg)

AS4143.3 -

42 %

Strong points

EN 1891 Aramid

Strength with sewn terminations

• Reduction

2200 daN (kg)

OPTION Standard CE Sewn terminations

in shrinkage (polyester). heat resistance (Melting point of polyester 260° C). • Better abrasion resistance due to a thick sheath. • Better

EN 1891 Ref. black: BCSK11R.200 (200m)

Standard AS4143.3

Ref. BCSA115.200

JADE © vuedici.org / BEAL

ergo 12,5 mm

Performances

Designed to meet the needs of firefighters in their different tasks, conforming to civil security code NIT no. 129-83-92 and to the Standard EN 1891.

Weight per metre Breaking load % of the sheath

EN 1891 -

Strength with sewn terminations

A 101 g 3800 daN (kg) 43 % 2700 daN (kg)

OPTION Sewn terminations

10

Type

Standard CE

EN 1891

Ref. white: B CSE125.30 (30m) / BCSE125.60 (60m) / BCSE125.100 (100m) / BCSE125.200 (200m)

11


Biloba 11,5 mm A lightweight arborist rope specially designed for use with mechanical Prusiks. Its double braided construction makes the rope particularly supple. Fluorescent colours ensure the rope is highly visible. Materials: polyester sheath, polyamide core

Weight per metre Breaking load % of the sheath

EN 1891 -

Strength with sewn terminations

3000 daN (kg) 44 %

EN 1891

Compact sewn terminations

ginkgo 12 mm

Its double braid polyester serves to make prusik loops. This 10 mm diameter rope, with high abrasion resistance, runs perfectly.

89 g

OPTION Standard CE

volcano 8 / 10 / 12 mm

regate 10 mm

A

1800 daN (kg)

Ref. orange & yellow: BCSE115.200 (200m) orange & yellow with sewn termination: BCSE115.20TERM (20m) / BCSE115.30TERM (30m) / BCSE115.35TERM (35m) / BCSE115.40TERM (40m) / BCSE115.50TERM (50m) / BCSE115.60TERM (60m) orange & yellow with two ending: BCSE115.20TERM (20m) / BCSE115.30TERM (30m) / BCSE115.35TERM (35m) / BCSE115.40TERM (40m) / BCSE115.50TERM (50m) / BCSE115.60TERM (60m)

Performances

Type

Breaking load % of the sheath Strength with sewn terminations

EN 1891 -

A Weight per metre

Weight per metre

Diameter

8 / 10 / 12 mm

Breaking load

2200 daN (kg)

Standard CE

EN 354

Ref. black / yellow / white: BREG10.100 (100m)

2700 daN (kg) 69 % 2200 daN (kg) EN 1891

Sewn terminations

BAobab 13,5 mm

75 g

92 g

OPTION Standard CE

Short lengths of rope with sewn terminations for constructing self-locking (prusik) loops. These ropes have a 50 % aramid construction intermixed with polyester filaments. Prusiks made from classic ropes have a very short life, because they glaze in use due to the effect of friction. The presence of 50 % of highly thermally resistant aramid fibres in VOLCANO protect it against melting and thus greatly increases its lifetime. Available in 10 and 12 mm, and 70 and 90 cm lengths, to suit different types of knots. The 10 mm VOLCANO also comes in cut lengths: - In multiples of 10 cm. - Maximum length 200 cm. - Minimum 50 pieces per length.

Per fo r m a n c es

Made along the same lines as the BAOBAB, its thinner diameter makes a lighter rope, more supple and easier to handle than BAOBAB. It benefits from a new, glueless procedure for bonding the sheath onto the core, preventing all slippage, but still allowing splices to be made.

DISMANTLING SLINGS

ROPES FOR prusiks

Per fo r m a n c es

Type

ROPES FOR TREE WORK

Ref. black & yellow: BCSE12.200 (200m) black & yellow with sewn termination: BCSE12.20TERM (20m) / BCSE12.30TERM (30m) / BCSE12.35TERM (35m) / BCSE12.40TERM (40m) / BCSE12.50TERM (50m) / BCSE12.60TERM (60m) black & yellow with two ending: BCSE12.20TERM2 (20m) / BCSE12.30TERM2 (30m) / BCSE12.35TERM2 (35m) / BCSE12.40TERM2 (40m) / BCSE12.50TERM2 (50m) / BCSE12.60TERM2 (60m)

UNICORE

Its braiding results from the technology of American tree workers, giving it great qualities of strength, pliability and easy handling. The UNICORE process which bonds the core and sheath prevents sheath slippage during use with self-loacking loops.

Type Weight per metre Breaking load % of the sheath Strength with sewn terminations

EN 1891 OPTION

Standard CE

119 g 3000 daN (kg) 82 %

EN 1891

red & white with sewn termination: BCSE135.20TERM2 (20m) / BCSE135.30TERM2 (30m)

Ref. blue: BLG12 (12mm) / green: BLG14 (14mm) / red: BLG16 (16mm) / black: BLG18 (18mm)

Type Weight per metre Breaking load % of the sheath Strength with sewn terminations

EN 1891 -

Standard CE

TOP TRUNK SLING (Pulley attachment)

Ref. yellow: BLTT3 (3m) / BLTT4 (4m)

TOP TRUNK SLING

Ref. grey: BLTTD5 (5m)

A 98 g

Diameter

3400 daN (kg) 61 % 2500 daN (kg)

OPTION Sewn terminations

Ref. yellow: BLT3 (3m) / BLT5 (5m) / BLT7 (7m)

(High strength pulley attachment) Of identical construction to TOP TRUNK, with a Dyneema sheath which gives it exceptional breaking load and a WLL of more than 2000 daN(kg) !

Coming from the technology of American tree dismantling ropes, GOLIATH is a static double braid rope of 100 % polyester pre-stretched with a polyurethene coating for better abrasion resistance. This rope has an excellent strength/diameter ratio.

Per fo r m a n c es

This multi-use rope, with an excellent handling/ solidity balance, allows you to undertake all types of tree work in full security.

12

Ref. red & white: BCSE135.200 (200m)

Manufactured from hollow braid polyester with a polyurethane coating, this adjustable sling is principally designed for the attachment of braking systems at ground level, at the base of the trunk. Its conception allows it to adapt exactly to different trunk diameters. Available in two lengths: 3 and 4 m.

DYNEEMA 5 m

goliath

2300 daN (kg)

Sewn terminations

bonsaï 13 mm

The regulations require the application of a coefficient of 7 to all lifting ropes. Breaking load divided by 7 = WLL (Working Load Limit). The weight of the branches must not exceed the Working Load Limit for dismantling in total security. BEAL retention ropes are colour coded by diameter and thus by strength in order to avoid errors.

A

ADJUSTABLE TRUNK SLING

Manufactured from hollow braid polyester with a polyurethane coating, this sling is specifically adapted to light removals up to 1100 daN(kg) WLL. Available in two lengths: 3 and 4 m.

Ref. 8 mm red & yellow: BV08.70 (70cm) / BV08.90 (90cm) 12 mm red & yellow: BV12.70 (70cm) / BV12.90 (90cm) 10 mm red & yellow: BV10.70 (70cm) / BV10.90 (90cm)

RETENTION ROPES

Per fo r m a n c es

Slings allowing a pulley to be fixed at height in the tree, and on the other hand the braking system at the base of the trunk.

EN 1891

Ref. blue & white: BCSE13.200 (200m) Blue & white with sewn termination: BCSE13.20TERM (20m) / BCSE13.30TERM (30m) / BCSE13.40TERM (40m) / BCSE13.50TERM (50m) Blue & white with two sewn terminations: B CSE13.20TERM2 (20m) / BCSE13.30TERM2 (30m) / BCSE13.40TERM2 (40m) / BCSE13. 50TERM2 (50m)

TRUNK

TOP TRUNK

TOP TRUNK DYNEEMA

20 mm

20 mm

18 mm

Breaking load

8000 daN (kg) 8000 daN (kg) 18000 daN (kg)

Polyester

CMU

1100 daN (kg) 1100 daN (kg) 2500 daN (kg)

Polyester

Weight per metre

240 g

240 g

160 g

Material

Polyester

Polyester

Dyneema

Diameter

Breaking load

CMU

Weight per metre

Material

GOLIATH 12

12 mm

4200 daN (kg)

600 daN (kg)

128 g

Polyester

GOLIATH 14

14 mm

5500 daN (kg)

780 daN (kg)

179 g

GOLIATH 16

16 mm

6700 daN (kg)

950 daN (kg)

219 g

GOLIATH 18

18 mm

8000 daN (kg)

1000 daN (kg)

260 g

Polyester

13

ROPES

ROPES FOR TREE WORK


INTERVENTION ROPES

INTERVENTION ROPES (RESISTANT TO RAPID DESCENTS)

Type B semi-static ropes specially developed for rapid descent from helicopters by special forces. Their Aramid sheath does not melt, even against a descender overheated by the descent. Whereas classic ropes in polyamide or polyester have a very limited lifetime because their sheath melts, rendering the rope stiff and useless, RAIDER ropes permit multiple descents.

access 10,5 mm

Per fo r m a n c es

Performances

ROPES

RAIDER 10,5 mm

(SEMI-STATIC)

UNICORE Type Weight per metre

B

Type

Thanks to the UNICORE Process, ACCESS ropes reach a new level in security. By special order only.

Weight per metre

69 g

A 65 g

Core

Breaking load % of the sheath

Breaking load

2300 daN (kg)

% of the sheath

32 %

3000 daN (kg) 38 %

Sheath Aramid

Strength with sewn terminations

EN 1891 -

Aramid

OPTION Standard CE

OPTION

Type B semi-static ropes specially developed for rapid descent from helicopters by special forces. Their Aramid sheath does not melt, even against a descender overheated by the descent. Whereas classic ropes in polyamide or polyester have a very limited lifetime because their sheath melts, rendering the rope stiff and useless, RAIDER ropes permit multiple descents.

Per fo r m a n c es

Weight per metre

% of the sheath

OPTION

Standard CE

81 g 2600 daN (kg)

Type Weight per metre Breaking load

Strength with sewn terminations

Sheath Aramid

% of the sheath

2200 daN (kg)

EN 1891 -

Strength with sewn terminations

EN 1891 Standard CE

10 mm

11 mm : 73 g 11,5 mm : 78 g 11 mm : 3200 daN(kg) 11,5 mm : 3400 daN(kg) 11 mm : 36 % 11,5 mm : 38 % 11,5 mm : 2600 daN(kg)

EN 1891

10,5 mm

Ref  black: B CSN09.200 (9mm/200m) / BCSN10.200 (10mm/200m) / BCSN105.50 (10,5mm/50m) / BCSN105.60 (10,5mm/60m) / BCSN105.100 (10,5mm/100m) / BCSN105.200 (10,5mm/200m) / BCSN11.50 (11mm/50m) / BCSN11.100 (11mm/100m) / BCSN11.200 (11mm/200m) / BCSN115.200 (11,5mm/200m)

11 mm

11,5 mm

75 g 2400 daN (kg) 30 % 2200 daN (kg)

OPTION Standard CE

tapes and slings

EN 1891 Ref. black: B CSK11RT.200 (200m)

INTERVENTION ROPES

top gun II 10,5 mm

(DYNAMIC)

FLAT WEBBING

ROUND SLINGS

Per fo r m a n c es Ref. BC105T.200.BK BC105T.50.BK BC105T.60.BK

UNICORE

26 mm /

Type Weight per metre Breaking load

EN 892 -

11 mm : A 11,5 mm  : A

A

Sewn terminations

Dynamic ropes cushion impacts and must be used during certain interventions to absorb the energy of any falls.

Weight per metre

9 mm : B 10 mm : A 10,5 mm : A 9 mm : 51 g 10 mm : 62 g 10,5 mm : 65 g 9 mm : 1900 daN(kg) 10 mm : 2400 daN(kg) 10,5 mm : 3000 daN(kg) 9 mm : 43 % 10 mm : 43 % 10,5 mm : 38 % 9 mm  / 10 mm : 10,5 mm / 11 mm : 2400 daN(kg)

Per fo r m a n c es

% of the sheath

Aramid

Type

Breaking load

Ref. black: B CSK11R.200 (200m)

raider tactic 11 mm

EN 1891 -

9 mm

Semi-static ropes are endowed with moderate stretch to facilitate interventions and abseils at moderate speed.

B

Sewn terminations

As with the 11 mm RAIDER rope, designed for multiple descents, the RAIDER TACTIC 11 mm is slightly more limited. The thickness of the Aramid sheath has been reduced, and the amount of core increased, in order for RAIDER TACTIC 11 mm to be certifiable as a Type A rope.

Performances

intervention

41 %

EN 1891 Ref  black: BCSA105.200.BK (200m)

Core

Breaking load

Strength with sewn terminations

EN 1891 Aramid

Type

Standard CE

2400 daN (kg)

Sewn terminations

Ref. black: BCSK105R.200 (200m)

RAIDER 11 mm

Strength with sewn terminations

EN 1891

Sewn terminations

% of the sheath Strength with sewn terminations Standard CE

14

EN 1891 -

2200 daN (kg)

1500 kg /

EN 565

18 mm /

2200 kg / EN 566 / EN 795 B + EN 354

68 g 2100 daN (kg)

18 mm /

1600 kg /

EN 565

30 mm /

2200 kg /

EN 566

26 mm / Ref. PLATE 18mm

30cm : BSA30.5.BK 40cm : BSA40.5.BK 50cm : BSA50.5.BK 60cm : BSA60.5.BK 80cm : BSA80.5.BK 100cm : BSA100.5.BK 120cm : BSA120.5.BK

2200 kg / 150cm : BSA150.5.BK 175cm : BSA175.5.BK

Ref. PLATE 26mm 100cm : BSA26.100.5 120cm : BSA26.120.5 150cm : BSA26.150.5 175cm : BSA26.175.5

EN 566 Ref. PLATE 30mm 100cm : BSA30.100.5 120cm : BSA30.120.5 150cm : BSA30.150.5 175cm : BSA30.175.5

40 % 1700 daN (kg) EN 892

Ref. BSP26UNI.100 (26mm / 100m) BSP18.100 (18mm / 100m)

TUBULAR WEBBING Ref. BST26.100 (100m)

26 mm /

1600 kg /

EN 565

15


0 %

65 g

38 %

62 %

2,5 %

Polyamide

3200 daN(kg) 2100 daN(kg) 2200 daN(kg) 2400 daN(kg)

20

5,1 kN

2,8 %

0 %

73 g

36 %

64 %

2 %

Polyamide

ANTIPODES 10,5 mm

EN 1891

CE

A

3000 daN(kg) 1950 daN(kg) 2100 daN(kg) 2400 daN(kg)

16

5,1 kN

3 %

0,8 %

65 g

38 %

62 %

5 %

Polyamide

ANTIPODES 11,5 mm

EN 1891

CE

A

3400 daN(kg) 2300 daN(kg) 2400 daN(kg) 2600 daN(kg)

>20

5,3 kN

2,6 %

0,5 %

78 g

38 %

62 %

5 %

Polyamide

INDUSTRIE 10,5 mm

EN 1891

CE

A

3000 daN(kg) 1950 daN(kg) 2100 daN(kg) 2400 daN(kg)

16

5,1 kN

3 %

0,8 %

65 g

38 %

62 %

5 %

Polyamide

INDUSTRIE 11 mm

EN 1891

CE

A

3200 daN(kg) 2100 daN(kg) 2200 daN(kg) 2400 daN(kg)

20

5,1 kN

2,8 %

0,8 %

73 g

36 %

64 %

4 %

Polyamide

INDUSTRIE 12 mm

EN 1891

CE

A

4200 daN(kg) 2400 daN(kg)

3000 daN(kg)

20

5,2 kN

2,5 %

0,3 %

94 g

34 %

66 %

2,4 %

Polyamide

CONTRACT 10,5 mm

EN 1891

CE

A

2500 daN(kg) 1750 daN(kg) 2000 daN(kg) 2200 daN(kg)

12

5 kN

2,9 %

0 %

66 g

39 %

61 %

3,3 %

Polyamide

TOP WORK 10,5 mm

EN 1891

CE

A

2600 daN(kg) 1800 daN(kg) 2000 daN(kg) 2200 daN(kg)

15

4,6 kN

4,8 %

0,3 %

64 g

44 %

56 %

3,5 %

NORTH SEA 11 mm

EN 1891

CE

A

2800 daN(kg) 1900 daN(kg) 2000 daN(kg) 2200 daN(kg)

> 20

5,1 kN

4 %

0,9 %

75g

44 %

56 %

3 %

TOP GUN II 10,5 mm UNICORE

EN 892

CE

2100 daN(kg)

-

-

1700 daN(kg)

-

-

-

68 g

40 %

60 %

-

Polyamide

APOLLO 11 mm

EN 892

CE

2300 daN(kg)

-

-

-

-

-

-

75 g

35 %

65 %

-

Polyamide

4,3 kN

2%

0,8 %

75 g

44 %

56 %

0 %

Sheath: Polyamide Core: Polyamide/ Vectran

-

ROPES

3 %

A

Type

Standard

Sheath slippage

5,1 kN

CE

ROPES FOR DIFFICULT AREA ACCESS EN 1891 CE A

ACCESS 10,5 mm UNICORE

Extension 50/150 kg

Material

Impact force factor 0.3

Shrinkage in water

• DLT. Dynalite termination (not available in France): Lightweight textile termination, composed of a Dyneema slingspliced onto the rope end. Allows rapid fixing to most anchor points. At the moment of release the absence of metal in the termination eliminates the risk of injury to persons, or damage to boat bridges. The DLT termination must be checked before every use.

Number of fall factor 1

Mass of the core

• EYE SPLICE: A large diameter splice, facilitating the deployment of the rope from scaffolding and larger beams, in order to simulate practice descents from helicopters.

Strength with sewn terminations

% of the sheath

Its soft and flexible construction promotes a comfortable and precise descent. FAST ROPE is available with 2 types of terminations:

Strength with Figure-of-9 knot

Weight per metre

SOFT FAST ROPE 40 mm

Strength with Figure-of-8 knot

16

EN 1891

Breaking load

3000 daN(kg) 1950 daN(kg) 2100 daN(kg) 2400 daN(kg)

ACCESS 11 mm UNICORE

Model

Tested and approved by special forces around the world, BEAL FAST ROPE has been specifically developed for rapid descent from helicopters without the aid of a descender, just the friction of gloves !

Certification

INTERVENTION ROPES - fast ropes

DYNAMIC ROPES

Factor 2 11 Factor 2 16

Universal rope to both Standards A 24 EN 892 DYNASTAT 10,5 mm 2500 daN(kg) 1650 daN(kg) 1700 daN(kg) 1900 daN(kg) Factor 2 EN 1891 CE 10 floating rope PRO WATER 11 mm UNICORE

EN 1891

CE

A

2500 daN(kg) 1600 daN(kg)

-

-

5

5 kN

3,6 %

0 %

80 g

33 %

67 %

0 %

Polyamide / Neopren

EN 1891

CE

A

3000 daN(kg) 1950 daN(kg)

-

2400 daN(kg)

16

5,1 kN

3 %

0,8 %

65 g

38 %

62 %

5 %

Sheath: Polyester Core: Polyamide

94 g

43 %

57 %

RESCUE ROPES

EYE SPLICE

RESCUE 10,5 mm

NFPA

CE

A

3600 daN(kg)

RESCUE Reactive 10,5  mm

EN 1891

CE

A

3000 daN(kg) 1950 daN(kg)

-

2800  daN(kg)

16

5,1 kN

2,6 %

0 %

67 g

37  %

63 %

1,8 %

Polyamide

PRO WATER 11 mm UNICORE

EN 1891

CE

A

2500 daN(kg) 1600 daN(kg)

-

-

5

5 kN

3,6 %

0 %

80 g

33 %

67 %

0 %

Polyamide / Neopren

RESCUE VLS 11,3  mm

DLT. Dynalite termination

-

0,8 %

Polyester

ROPES RESISTANT TO HIGH TEMPERATURES Ref. SOFT FAST ROPE + SPLICE 18m: BFR60.EP SOFT FAST ROPE + DLT 18 m : BFR60.DLT SOFT FAST ROPE + SPLICE 27,5m : BFR90.EP SOFT FAST ROPE + DLT 27,5m : BFR90.DLT

RAIDER 10,5  mm

EN 1891

CE

B

2300 daN(kg) 1800 daN(kg)

-

2200 daN(kg)

6

4,6 kN

3,2 %

0 %

69 g

32 %

68 %

0,5 %

RAIDER 11 mm

EN 1891

CE

B

2600 daN(kg) 1900 daN(kg)

-

2200 daN(kg)

8

4,7 kN

3,3 %

0,6 %

81 g

41 %

59 %

0,5 %

RAIDER TACTIC 11 mm

EN 1891

CE

A

2400 daN(kg) 1800 daN(kg)

-

2200 daN(kg)

6

5,9 kN

3,2 %

0 %

75 g

30 %

70 %

0,5 %

ROPES RESISTANT TO CHEMICAL PRODUCTS HOTLINE 11 mm

EN 1891

CE

A

2500 daN(kg) 1900 daN(kg)

-

2200 daN(kg)

15

5,6 kN

3,1 %

0 %

79 g

42 %

58 %

3,3 %

RAIDER 11 mm

EN 1891

CE

B

2600 daN(kg) 1900 daN(kg)

-

2200 daN(kg)

8

4,7 kN

3,3 %

0,6 %

81 g

41 %

59 %

0,5 %

Sheath: Polyamide Core: Polyamide/Aramid Sheath: Aramid Core: Polyamide

ANTIPODES 9 mm

EN 1891

CE

B

1900 daN(kg) 1350 daN(kg) 1600 daN(kg)

-

8

4 kN

3,6 %

0,3 %

51 g

43 %

57 %

4 %

Polyamide

ANTIPODES 10 mm

EN 1891

CE

A

2400 daN(kg) 1700 daN(kg) 1800 daN(kg)

-

6

4,3 kN

4,4 %

0 %

62 g

43 %

57 %

4 %

Polyamide

ERGO 12,5 mm

EN 1891

CE

A

3800 daN(kg) 2500 daN(kg)

-

2700 daN(kg)

> 20

5,2 kN

2,9 %

0 %

101g

43 %

57 %

3,7 %

Polyamide

australis 11,5  mm

AS4143.3

-

-

3490 daN(kg)

-

-

-

-

-

0 %

93,7 g

42 %

58 %

-

3000 daN(kg) 1800 daN(kg)

-

2500 daN(kg)

> 15

5 kN

3,8 %

0 %

89 g

44 %

56 %

2,8 % 2,8 %

LIGHTWEIGHT ROPES

TEXTURIZED FAST ROPE 44 mm Its construction from completely textured strands makes the rope more slippery yet more durable. • Polyamide sling termination Suitable for most anchors. No metal part that can cause injury. • Metal termination A crimped metal end piece allows the rope to be fixed to a helicopter.

Sheath: Aramid Core: Polyamide Sheath: Aramid Core: Polyamide Sheath: Aramid Core: Polyamide

SPECIAL ROPES

-

ROPES FOR TREE WORK Biloba 11,5  mm

EN 1891

CE

A

GINKGO 12 mm

EN 1891

CE

A

2700 daN(kg) 1600 daN(kg)

-

2200 daN(kg)

>8

5,7 kN

4 %

0 %

92 g

69 %

31 %

BAOBAB 13,5 mm UNICORE

EN 1891

CE

A

3000 daN(kg) 1900 daN(kg)

-

2300 daN(kg)

> 20

5,1 kN

5 %

0 %

119 g

82 %

18 %

2 %

Sheath: Polyester Core: Polyamide Sheath: Polyester Core: Polyamide Sheath: Polyester Core: Polyamide

BONSAI 13 mm

EN 1891

CE

A

3400 daN(kg) 1800 daN(kg)

-

2500 daN(kg)

> 20

5,3 kN

4,2 %

0 %

98 g

61 %

39 %

4,5 %

Polyamide

REGATE 10 mm

-

CE

-

1700 daN(kg)

-

-

-

-

-

-

73 g

-

-

-

Polyester

RAIDER 10,5  mm

EN 1891

CE

B

2300 daN(kg) 1800 daN(kg)

-

2200 daN(kg)

6

4,6 kN

3,2 %

0 %

69 g

32 %

68 %

0,5 %

RAIDER 11 mm

EN 1891

CE

B

2600 daN(kg) 1900 daN(kg)

-

2200 daN(kg)

8

4,7 kN

3,3 %

0,6 %

81 g

41 %

59 %

0,5 %

RAIDER TACTIC 11 mm

EN 1891

CE

A

2400 daN(kg) 1800 daN(kg)

-

2200 daN(kg)

6

5,9 kN

3,2 %

0 %

75 g

30 %

70 %

0,5 %

Sheath: Aramid Core: Polyamide Sheath: Aramid Core: Polyamide Sheath: Aramid Core: Polyamide

-

INTERVENTION ROPES

SEMI-STATIC INTERVENTION ACCESS 10,5 mm UNICORE

EN 1891

CE

A

3000 daN(kg) 1950 daN(kg) 2100 daN(kg) 2400 daN(kg)

16

5,1 kN

3 %

0 %

65 g

38 %

62 %

2,5 %

Polyamide

INTERVENTION 9 mm

EN 1891

CE

B

1900 daN(kg) 1350 daN(kg) 1600 daN(kg)

-

8

4 kN

3,6 %

0,3 %

51 g

43 %

57 %

4 %

Polyamide

INTERVENTION 10 mm

EN 1891

CE

A

2400 daN(kg) 1700 daN(kg) 1800 daN(kg)

-

6

4,3 kN

4,4 %

0 %

62 g

43 %

57 %

4 %

Polyamide

INTERVENTION 10,5 mm

EN 1891

CE

A

3000 daN(kg) 1950 daN(kg) 2100 daN(kg) 2400 daN(kg)

16

5,1 kN

3 %

0,8 %

65 g

38 %

62 %

5 %

Polyamide

INTERVENTION 11 mm

EN 1891

CE

A

3200 daN(kg) 2100 daN(kg) 2200 daN(kg) 2400 daN(kg)

20

5,1 kN

2,8 %

0,8 %

73 g

36 %

64 %

4 %

Polyamide

INTERVENTION 11,5 mm

EN 1891

CE

A

3400 daN(kg) 2300 daN(kg) 2400 daN(kg) 2600 daN(kg)

> 20

5,3 kN

2,6 %

0,5 %

78 g

38 %

62 %

5 %

Polyamide

EN 892

CE

Factor 2 11

-

-

-

68 g

40 %

60 %

-

Polyamide

-

-

-

Polyamide

Polyamide

DYNAMIC ROPES TOP GUN II 10,5 mm UNICORE SOFT FAST ROPE 40 mm

-

-

2100 daN(kg) -

7600 daN(kg)

-

-

1700 daN(kg)

-

-

-

-

-

-

-

94 kg  / 100 m

-

-

-

-

-

-

-

96 kg  / 100 m

-

-

-

Polyamide sling termination: Ref. TEXTURIZED FAST ROPE + LOOP 18m: BFRT60.L TEXTURIZED FAST ROPE + STEEL END 18m: BFRT60.ST TEXTURIZED FAST ROPE + LOOP 27,5m: BFRT90.L TEXTURIZED FAST ROPE + STEEL END 27,5m: BFRT90.ST

16

TEXTURIZED FAST ROPE 44 mm

-

-

-

6000 kg

Metal termination:

3000 kg Standard reference

-

Type A >2200 daN(kg)

>1500 daN(kg)

-

>1500 daN(kg) > 5/100 kg < 6kN

≤ 5 %

20 mm + 10 (D-9 mm)

-

-

-

-

-

Type B

>1200 daN(kg)

-

>1200 daN(kg) > 5/80 kg

≤ 5 %

< 15 mm

-

-

-

-

EN 1891 >1800 daN(kg)

< 6kN

17


FALL ARREST LANYARDS

FALL ARREST LANYARDS

ABSORB’AIR

DYNAPRO-AIR HOOK

Webbing construction energy absorber. Energy is absorbed through the controlled tearing of the webbing’s weft during deployment.

Fall arrest lanyard with integrated energy absorber (EN355 + EN 362) designed for work environments with a fall risk. Strong points

and lightweight. • Easy to open semi-rigid pouch. • Easy to inspect in its entirety. • Easy to dry once unrolled.

• Can

be combined with a DYNAPRO lanyard to create a lanyard with energy absorber. • Marked with a unique serial number and labelled to accommodate personal markings as well as a QR code to assist traceability.

• ABSORB’AIR

absorber combined with DYNAPRO lanyard. with an AIR-HOOK LARGE connector to connect to the anchor point and an O’LIGHT 3-MATIC connector to connect to the harness. • Sewn terminations with reinforced eyes to protect the rope. • Removable cover allows the inspection of termination stitches. • Supplied

Réf : BLDA

• Marked

with a unique serial number and equipped with a label to accommodate personal markings as well as a QR code to assist traceability. • Available in 3 lengths (including connectors and absorber): 1m / 1.5m / 2m.

LANYARDS

Strong points • Compact

1 m gr

880 g Réf : BLDPAH100

1.5 m gr

920 g

Stitching protected by a moulded cover

Réf : BLDPAH150 gr

185 g

gr

2 m

970 g Réf : BLDPAH200

DYNAPRO-AIR LIFE LINE

DYNAPRO-AIR V HOOK

Fall arrest lanyard with integral energy absorber (EN355 + EN 362) for progression on a fixed line.

V-shaped fall arrest lanyard with integrated energy absorber (EN355 + EN362). Designed as a progression lanyard for work environments with a fall risk, it is well adapted to structures where anchor points are cables, bars or beams.

Strong points

Strong points

•A  BSORB’AIR

shock absorber integrated with the DYNAPRO lanyard. •S  upplied with an AIR SMITH 3-MATIC steel connector for connection to a working line trolley or directly to its cable, as well as a O’LIGHT 3-MATIC connector for connection to the harness. • Sewn termination with reinforced eye to protect the rope. • Removable cover allows the inspection of termination stitches.

• Marked

with a unique serial number and equipped with a label to accommodate personal markings as well as a QR code to assist traceability. • Length (including connectors and shock absorbers): 1.70m.

• ABSORB’AIR

absorber combined with a V-shaped lanyard. lanyard with two symmetrical rope legs for progression using fall arrest techniques. • Supplied with 2 AIR-HOOK LARGE connectors to clip anchor points and an O’LIGHT 3-MATIC connector to connect to the harness. • Sewn terminations with reinforced eyes to protect the rope. • V-shaped

• 2

removable covers allow the inspection of termination stitches. with a unique serial number and equipped with a label to accommodate personal markings as well as a QR code to assist traceability. • Available in 2 lengths (including connectors and absorber): 1m / 1.5m • Marked

1.7 m gr

740 g

gr

1450 g

Réf : BLDPAL170

Stitching protected by a moulded cover Réf : BLDPAVH100

1 m

gr

Stitching protected by a moulded cover

Réf : BLDPAVH150

1530 g

1.5 m

DYNAPRO-AIR V LIFE LINE

DYNAPRO-AIR V HOOK XL

V-shaped fall arrest lanyard with an integral energy absorber (EN355 + EN362). It is a lanyard for progression on a fixed line. It is well adapted for passing intermediate anchors on cables when there is no trolley on the working line.

V-shaped fall arrest lanyard with integrated energy absorber (EN355 + EN 362). Designed as a progression lanyard for work environments with a fall risk, the size of its connectors make it particularly suited to metal structures.

Strong points

Strong points

• ABSORB’AIR

absorber integral with V lanyard. • Supplied with 2 AIR-SMITH 3-MATIC steel connectors for clipping to the cable and one O’LIGHT 3-MATIC for connecting to the harness. • Sewn termination with reinforced eye to protect the rope. • Removable cover allows the inspection of termination stitches.

• Marked

with a unique serial number and equipped with a label to accommodate personal markings as well as a QR code to assist traceability. • Length (including connectors and shock absorbers): 1.70 m.

• ABSORB’AIR

absorber combined with a V-shaped lanyard.

• V-shaped lanyard with two symmetrical rope legs for progression using

fall arrest techniques. Its 2 two metre legs allow fluid progression on large structures. • Supplied with 2 AIR-HOOK XL connectors that can clip anchors on large structures as well as an O’LIGHT 3-MATIC connector to connect to the harness.

• Sewn

terminations with reinforced eyes to protect the rope. removable covers allow the inspection of termination stitches. • Marked with a unique serial number and equipped with a label to accommodate personal markings as well as a QR code to assist traceability. • Available in 1 length (including connector and absorber): 2 m. • 2

Stitching protected by a moulded cover Réf : BLDPAVL170 gr

gr

1150 g

2530 g

Stitching protected by a moulded cover 1.7 m

18

2 m Réf : BLDPAVHL200

19


DYNAMIC LANYARDS

LANYARDS

dynapro

ADJUST’AIR

Simple dynamic rope lanyard with sewn termination for work restraint. The dynamic characteristics of this lanyard are far superior to those of a traditional static lanyard. adapted for work positioning at height. • Sewn termination with reinforced eye to protect the rope as well as a PINCH to assist connector orientation. • Enhanced level of protection thanks to the use of a dynamic rope.

140 g

• Removable

cover allows the inspection of termination stitches. • Marked with a unique serial number and labelled to accommodate personal markings as well as a QR code to assist traceability.

• Tubular

protection webbing for the rope. with a unique serial number and labelled to accommodate personal markings as well as a QR code to assist traceability.

• Marked

0.6 m Réf : BLDP60

Réf : 2m : BLSAA200 / 3m : BLSAA300 / 5m : BLSAA500

Stitching protected by a moulded cover

170 g Réf : BLDP100

gr

captive rope clamp. in 3 lengths: 2 m / 3 m / 5 m. • Sewn termination with reinforced eye to protect the rope. • Removable cover allows the inspection of termination stitches. • Available

LANYARDS

• Perfectly

gr

Strong points • Ergonomic,

Strong points

gr

Adjustable (EN358) work positioning lanyard in 12.5mm semi-static rope.

200 g Réf : BLDP150

1m

1.5 m

Strength: 2200 daN (kg) Stitching protected by a moulded cover

gr

2 m 70 g

dynapro 8

PINCH

Adjustable, dynamic rope lanyard with sewn terminations. The dynamic performance of this lanyard is greatly superior to that of traditional static lanyards. By making your own double fig-8 knot point of attachment to your harness you can obtain an assymetric ‘V’ lanyard adjusted to your needs. The lanyard thus made, in conformity with the notice, meets Standard EN 354.

System for securing the karabiner at the end of a rope or tape lanyard. Made out of particularly strong material, it ensures effective protection against abrasion when in contact with the rock.

gr

3 m 82 g

gr

5 m 1020 g

Strong points •P  ossible

to clip long or short. to pass intermediate anchors thanks to the 2 branches. •S  ewn terminations fitted with a sleeve to protect the rope and a pinch to hold the karabiner in position. •A  bility

gr

• Improved

security in the event of a fall (even of high factor) on the lanyard because of the use of dynamic rope. • Attach with a maillon rapide or directly onto the chest ring.

Pinch Réf : BLP

250 g

160 cm

Réf : BLDP8

Stitching protected by a moulded cover

1.6 m Strength: 2200 daN (kg)

dynapro V Assymetric ‘V’ dynamic rope lanyard with sewn terminations. The dynamic performance of this lanyard is greatly superior to that of traditional static lanyards. Strong points • Perfectly

adapted to work at height and rescue. to clip-in short or long. • Ability to pass intermediate anchors thanks to the 2 branches. • Sewn terminations fitted with a sleeve to protect the rope and a pinch to hold the karabiner in position. • Ability

• Improved

security in the event of a fall (even of high factor)on the lanyard because of the use of dynamic rope. • Secure with a maillon rapide.

Strength: 2200 daN (kg) gr

160 g

0.3 m Stitching protected by a moulded cover

0.6 m

BEAL_PRO_ACTION_2016©CRESPEAU

Réf : BLDPV

20

21


FALL ARREST, ROPE ACCESS AND WORK POSITIONING HARNESS

Hero pro

EN 361 EN 358 EN 813

• X shaped shoulder straps increase comfort and ensure excellent

• Two

load distribution. semi-rigid leg loops and waist belt provides optimal pressure distribution where the body is in contact with the harness • T  he padded shoulder straps are held apart to minimise neck chafing • T  he waist belt, leg loops and shoulder straps are lined with breathable foam to improve comfort and to reduce perspiration. • T  he

accessories

lightweight loops on the shoulder straps allow the attachment of accessories or storage of scaffolding hooks. • 4 large, pre-shaped gear loops are positioned around the waist belt to easily accommodate all equipment. • 6 mini gear loops can be used to attach AIR-LEASH or SUPER LEASH extendable tool holders or 3 tool pouches (TOOLBUCKET, GLASS-BUCKET or LONG TOOL BUCKET).

The harness is equipped with the HOLD UP compact chest ascender that is optimised for ascending ropes. The HOLD UP is designed to stay parallel to the user’s body allowing the rope to slide easily through the device, making it particularly user friendly. Strong points • X shaped shoulder straps increase comfort and ensure excellent

coMfort

• The

ergonomY

waist belt’s two lateral attachment loops can be folded back to minimise hindrance • The dorsal attachment point is made from steel. • Two opening quick release buckles (one per leg loop) enable the harness to be easily fitted even with cumbersome footwear.

• The

TRAcEABILITy

rear of the waist belt contains an area to allow personal marking such as your company’s name, as well as a QR code which allows a personal identifier to be generated (your name and unique ID).

Weight (g)

Waist belt (cm)

Leg loop (cm)

Torso circumference (cm)

Stature (cm)

Chest height (cm)

• A

load distribution. • The semi-rigid leg loops and waist belt provides optimal pressure distribution where the body is in contact with the harness. • The padded shoulder straps are held apart to minimise neck chafing. • The waist belt, leg loops and shoulder straps are lined with breathable foam to improve comfort and to reduce perspiration.

accessories

• The

ergonomY

Size

EN 361 EN 358 EN 813

EN 567 : 2013 diameter 8-13mm EN 12841 : 2006-B diameter 10-13mm 100kg

A fall arrest and work positioning harness with ascender to aid rope ascents.

Strong points

coMfort

Hero pro hold up

waist belt’s two lateral attachment loops can be folded back to minimise hindrance • The dorsal attachment point is made from steel. • Two opening quick release buckles (one per leg loop) enable the harness to be easily fitted even with cumbersome footwear. • A FLAT LINK connector allows the shoulders straps to be easily connected to the lower part of the harness and is compatible with the HOLD UP chest ascender. Its flat working surface ensures the webbing is properly seated.

Size

Weight (g)

removable elasticated strap helps to ensure correct positioning of the ventral ascender. • A removable elasticated strap helps to ensure correct positioning of the chest ascender. • Two lightweight loops on the shoulder straps allow the attachment of accessories or storage of scaffolding hooks. • 4 large, pre-shaped gear loops are positioned around the waist belt to easily accommodate equipment. • 6 mini gear loops can be used to attach AIR-LEASH or SUPER LEASH extendable tool holders or 3 tool pouches (TOOLBUCKET, GLASS-BUCKET or LONG TOOL BUCKET).

harness

A fall arrest and work positioning harness.

FALL ARREST, ROPE ACCESS AND WORK POSITIONING HARNESS

• The

traCEabilitY

rear of the waist belt contains an area to allow personal marking such as your company’s name, as well as a QR code which allows a personal identifier to be generated (your name and unique ID).

Waist belt (cm)

Leg loop (cm)

Torso circumference (cm)

Stature (cm)

Chest height (cm)

S

2065

70-90

50-65

70-100

155-175

55-70

S

2155

70-90

50-65

70-100

155-175

55-70

M-L

2125

80-105

55-65

80-120

170-185

65-80

M-L

2215

80-105

55-65

80-120

170-185

65-80

XL

2230

90-130

60-70

100-140

180-210

75-85

XL

2320

90-130

60-70

100-140

180-210

75-85

NEW

Ref: S : BHPHO1 M-L : BHPHO2 XL : BHPHO3

Ref: S : BHPH1 M-L : BHPH2 XL : BHPH3

22

23


WORK POSITIONING AND ROPE ACCESS HARNESS

Shaolin

EN 358 EN 813 (EN361 With a torso)

SHAOLIN + AIR TOP

shape

LIGHT • I ts

•  The

ergonomY

ergonomY

SHAOLIN + YPSILON

S

700

60-100

42-60

760

72-120

52-70

XL

810

85-140

57-75

Weight (g)

Waist circumference (cm)

one size

345

60-140

Ref: BHPAT

EN 361

YPSILON + SHAOLIN

Strong points

Leg loop circumference (cm)

M-L

Size

Lightweight and adjustable Y-shaped chest harness compatible with HERO SIT and SHAOLIN sit harnesses. Comfortable and easy to fit, it ensures the user remains in an upright position during a fall.

Work at height, rescue, route setting, and high ropes course technicians. Waist circumference (cm)

AIR TOP + HERO SIT

YPSILON

Uses

Weight (g)

NEW

Work at height, industry, rescue, route setting

Ref: S : BHPSH1 M-L : BHPSH2 XL : BHPSH3

via an identification area with QR code which allows a personal identifier to be generated (your name and unique ID). • C  ompatible with the AIR TOP and YPSILON chest harness to create a full body harness EN 361.

Size

• Figure of 8 shape provides freedom of movement and distributes pressure around the chest evenly. • 2 adjustment buckles to adjust the length of the shoulder straps. • A single adjustment buckle allows the sternal attachment point to be correctly positioned in relation to the user, regardless of their physique. • A reinforced webbing fall arrest attachment point is ideal in confined spaces allowing progression without hindrance. • Can easily be fitted with an elastic positioning strap for the chest ascender. • Large elastic retainers help tidy the chest ascender’s webbing. Uses

• T  raceability

traceability

AIR TOP + SHAOLIN

Strong points

 This harness benefits from new technology in the PRO range: WEB CORE technology provides exceptional levels of comfort thanks to optimal pressure distribution on hips and thighs. WEB CORE is a wide, thin and lightweight piece of webbing laser cut to the shape of the harness. This results in a more compact, lightweight and above all more comfortable harness.

ergonomic construction allows a large range of movement. low position of the ventral attachment point yields maximum progression when ascending ropes, whilst its large diameter provides the space for multiple connection to be made i.e. ascenders, connectors, descender and lanyards. •  Two ways of attaching equipment: - A large ring provides the space for multiple karabiners and lanyards to be connected and accessed easily during a rescue. - Two textile attachment points for connecting lanyards metallic devices on both sides of the ring. •2 lateral attachment points EN 358. •1 dorsal attachment point for winching. • A  handle can be fitted at the back for rescue use. • 5  gear organisers, 4 gear loops and 6 fabric loops to connect parts of the WORK STATION range. • R  eplaceable rear elastics on leg loops.

EN 361, EN 12 277 type D

Adjustable chest harness with figure of 8 shape for use with a HERO SIT or SHAOLIN sit harness. This comfortable harness ensures the user remains in an upright position during a fall.

NEW

Strong points

Air top

harness

A lightweight fall arrest and work positioning harness.

WORK POSITIONING AND ROPE ACCESS HARNESS

shape

WEB-CORE

ergonomY

Hero Sit

EN 358 EN 813 (EN361 With a torso)

Work positioning and rope access harness.

• Lightweight • Adjustments are made using a front buckle at shoulder height and a dorsal rear buckle. • The shoulder strap slides through the sternal D-ring which provides a large range of movement and ensures ease of fitting. • A slight narrowing of the shoulder straps prevents chafing around the neck. • Multiple attachment points for the elasticated chest ascender retainer. • Two reinforced loops per shoulder strap can be used to attach scaffolding hooks.

NEW

YPSILON + HERO SIT

Uses

Work at height, industry, rescue

Strong points • The

semi-rigid leg loops and waist belt assure optimal pressure distribution where the body is in contact with the harness. • T  he waist belt and leg loops are lined with a breathable foam, increasing comfort and reducing perspiration.

coMfort

HERO SIT + AIR TOP

• T  he

waist belt’s two lateral attachment loops are articulated to minimise hindrance. • T  wo double action opening quick release buckles (one per leg loop) enable the harness to be easily fitted even with cumbersome footwear.

ergonomY

rear of the waist belt contains an area to allow personal marking such as your company’s name in addition to a QR code which allows a true identifier to be generated (your name and unique ID).

Ref: S : BHPHS1 M-L : BHPHS2 XL : BHPHS3

• 3 

24

Size

Weight (g)

Waist circumference (cm)

Leg loop circumference (cm)

S

1437

70-90

50-65

M-L

1478

80-105

55-65

XL

1568

90-130

60-70

Waist circumference (cm)

one size

370

60-140

Ref: BHPY

Stable and comfortable suspended work seat for rope access.

traceability

accessories

Weight (g)

Air Sit

• T  he

large, pre-shaped gear loops are positioned around the waist belt to easily accommodate all equipment. • 4  mini gear loops can be used to attach ‘AIR-LEASH’ extendable tool holders or 2 ‘TOOL-BUCKET’ tool pouches.

Size

HERO SIT + YPSILON

Strong points • Triangulation

of the 2 lateral attachment points assists stability. and breathable comfort padding. • 2 plastic lateral gear loops are pre-shaped for ease of clipping. • 4 mini gear loops are equally available on the sides to attach ‘AIR-LEASH’ extendable tool holders or 2 ‘TOOL-BUCKET’ tool pouches. • A ring under the seat can be used to attach a bag. • Durable

Ref: BSAS

25


FALL ARREST AND WORK POSITIONING HARNESS

Syncro

life jacket

EN 358 EN 361

Particularly lightweight work positioning and fall arrest harness adapted specifically for industrial and energy related work environments.

• T  he

comfort

traceability

the lateral and dorsal attachment points consist of sewn rope rings to reduce weight, noise and damage to delicate surfaces or coatings, particularly when ascending inside a wind turbine’s tower. • T  he rear attachment point consists of a sewn rope ring to reduce weight and noise. Its red colour promotes efficient identification in emergencies. • T  wo double action opening quick release buckles (one per leg loop) enable the harness to be easily fitted even with cumbersome footwear. • T  he sternal webbing strap with fall arrest attachment point can be easily opened and closed to assist harness fitting. Size

Weight (g)

1 (S-M-L) 2 (L-XL)

of an accessory like a radio or storage of scaffolding hooks. • 4  large, pre-shaped gear loops are positioned around the waist belt to easily accommodate all equipment. • 6  mini gear loops can be used to attach ‘AIR-LEASH’ extendable tool holders or 3 ‘TOOL-BUCKET’ tool pouches.

coMfort

Strong points

Specs

• The lifejacket gives access to the fall arrest points, suspension and positioning points of the harnesses • Easily adjustable on the harness • Easy fitting and maintenance of the jacket

• Firing pin can be operated manually or automatically • Homologation CE / ISO 12402-2 or CE / ISO 12402-3 • Buoyancy 150 newtons or 275 newtons • Personalisable, washable cover designed for industrial use • Asymmetrical bladder (balloon) ensures the user is returned to the surface and holds their head above water.

Safety jacket

Use

• In addition to BEAL PRO harness : BEAL : HERO PRO, SYNCRO, STYX, HERO SIT + AIR TOP, HERO SIT + YPSILON, SHAOLIN + AIR TOP et SHAOLIN + YPSILON, it can be used for maintenance of sewage sites, sewer workers , offshore platform operators etc …

harness

• B  oth

ergonomy

rear of the waist belt contains an area to allow personal marking such as your company’s name in addition to a QR code which allows a true identifier to be generated (your name and unique ID).

• T  wo fixed loops on the shoulder straps allow the attachment

accessories

ISO 12402-2 ISO 12402-3

Inflatable lifejacket designed to complete a full-body harness for industrial maintenance and work at height in risk to aquatic environments. Compatible with the BEAL PRO harnesses, it automatically inflates on contact with water, and can also be operated manually. The TYPHOON is available in two levels of buoyancy: 150 newtons or 275 newtons.

Strong points

 shaped shoulder straps increase comfort and ensure X excellent load distribution. • The semi-rigid leg loops and waist belt assure optimal pressure distribution where the body is in contact with the harness. • The padded shoulder straps with well-placed retainers minimise neck chafing. • The waist belt, leg loops and shoulder straps are lined with a breathable foam, increasing comfort and reducing perspiration.

Typhoon

Torso circumference (cm)

Stature (cm)

45-65

80-120

60-75

90-140

Waist belt (cm)

Leg loop (cm)

1700

65-105

1750

100-130

Chest height (cm)

Size

160-180

55-75

U

175-210

65-85

U

Weight (g)

Buoyancy

Standard

1295

150 newtons

CE/ISO 12402-3

1500

275 newtons

CE/ISO 12402-2

NEW Ref. 150 newtons: BHPT 275 newtons: BHPT2

Ref. S1 : BHPSYN1 S2 : BHPSYN2

26

27


FALL ARREST HARNESS

FALL ARREST HARNESS

Styx

Styx Rescue ergonomy traceability accessories

Lightweight and compact fall arrest harness with two attachment points: 1 sternal and 1 dorsal.

ergonomy traceability

Lightweight and compact fall arrest harness with two attachment points: 1 sternal and 1 dorsal.

Strong points

Strong points

•D  ifferent coloured leg loops help distinguish them from the shoulder

• Different coloured leg loops help distinguish them from the shoulder

• A 

• The

Size

Weight (g)

Leg loop (cm)

Chest height (cm)

Torso circumference (cm)

Stature (cm)

U

770

40-80

55-80

80-140

160-195

straps and so accelerate fitting. dorsal section contains an area to allow personal marking such as your company’s name in addition to a QR code which allows a true identifier to be generated (your name and unique ID).

harness

straps and so accelerate fitting. sleeveless jacket made from breathable materials facilitates easy fitting of the harness. • T  he dorsal section contains an area to allow personal marking such as your company’s name in addition to a QR code which allows a true identifier to be generated (your name and unique ID). • T  he dorsal section contains an area to allow personal marking such as your company’s name in addition to a QR code which allows a true identifier to be generated (your name and unique ID). • 4  mini gear loops can be clipped directly or used to attach ‘AIRLEASH’ extendable tool holders or 2 ‘TOOL-BUCKET’.

Size

Weight (g)

Leg loop (cm)

Chest height (cm)

Torso circumference (cm)

Stature (cm)

U

770

40-80

55-80

80-140

160-195 Ref. BHPSTR

Ref. BHPST

Styx Rescue Jacket ergonomy traceability

Lightweight and compact jacket style fall arrest harness with two attachment points: 1 sternal and 1 dorsal. Strong points

Styx Jacket

• UA

ergonomy traceability

sleeveless jacket made from breathable materials facilitates easy fitting of the harness. • The dorsal section contains an area to allow personal marking such as your company’s name in addition to a QR code which allows a true identifier to be generated (your name and unique ID).

Lightweight and compact jacket style fall arrest harness with two attachment points: 1 sternal and 1 dorsal. Strong points •A 

sleeveless jacket made from breathable materials facilitates easy fitting of the harness. • The dorsal section contains an area to allow personal marking such as your company’s name in addition to a QR code which allows a true identifier to be generated (your name and unique ID). .

Size

Weight (g)

Leg loop (cm)

Chest height (cm)

Torso circumference (cm)

Stature (cm)

U

1062

40-80

55-80

80-140

160-195 Ref. BHPSTJR

Tri-Angel Evacuation triangle for vertical rescues.

traceability

Strong points • Straightforward

positioning using 2 adjustable straps. straps, which are a different colour to the rest of the triangle, assist with both the ease and speed of deployment of the TRI-ANGEL onto the casualty. • The TRI-ANGEL adjusts in size to match the casualty using a webbing positioning scale with 3 settings. • Marked with a unique serial number. • Includes an area to allow personal marking such as your company’s name in addition to a QR code which allows a true identifier to be generated (your name and unique ID). • The

Size

Weight (g)

Leg loop (cm)

Chest height (cm)

Torso circumference (cm)

Stature (cm)

U

1062

40-80

55-80

80-140

160-195 Ref. BHPSTJ

Weight: 747 g Ref. BHPTA

28

29


HELMET FOR WORK AT HEIGHT AND RESCUE mercurY Hybrid helmet consisting of an ABS shell complimented by a polystyrene liner to promote efficient energy absorption during an impact. Strong points • Micro-adjustable

thanks to a precise adjustment dial. shell design optimises comfort and protection. • Excellent ventilation. • 4 headlamp clips are integrated into the shell. • Side slots for ear protectors.

• Chin

strap withstands more than 50 daN to ensurethe helmet remains secured during an impact. • Magnetic chin strap buckle facilitates fitting and undoing even with gloves or a single hand. • Internal comfort padding is removable and machine washable.

• Outer

Weight (g)

Circumference mini (cm)

Circumference maxi (cm)

432

50

62

HELMET / METAL

BKFM

Removable foam of comfort

Ref: BKM.O

Ref: BKM.R

Ref: BKM.W

PELTOR ADAPT Ear defender adaptors for MERCURY helmet > Ear defender adaptor with bayonet system > Compatible with MERCURY helmets

Ref: BKPAM

30

31


LOCKING CONNECTOR

LOCKING CONNECTOR

O’LIGH T

O’SMITH

Symmetrical aluminium oval shaped connector for use with equipment with swivelling side plates such as pulleys, rope clamps, mobile fall arrest devices, etc…

Symmetrical oval shaped steel connector.

61 mm

Strong points 17 mm

Minor Axis Strength

22 kN

8 kN

Open Gate Strength

Weight

6 kN

74 g

Strong points • Screw

lock system. serial number. • Keylock system. 17 mm

Ref: BMCLOL

22 kN

8 kN

Open Gate Strength

Weight

8 kN

82 g

Strong points • Triple

action 3-MATIC locking system. serial number. • Keylock system.

56 mm

• Individual

109 mm

111 mm

17 mm

Minor Axis Strength

17 mm

AIR-SMITH

Asymmetrical aluminium connector for lanyards or for use with belay devices. The asymmetrical shape helps to guide the device towards the connector’s apex.

High capacity asymmetrical steel connector with large opening to assist with connections to metal anchors. Its capacity allows it to accommodate multiple items.

66 mm

Strong points 20 mm

Major Axis Strength

Minor Axis Strength

26 kN

8 kN

Open Gate Strength

Weight

7 kN

65 g

73 mm

Strong points • Screw

lock system. • Individual serial number. • Keylock system.

Ref: BMCLBLN

BE LINK 3-MATIC 66 mm

Strong points

25 mm

20 mm

Major Axis Strength

Minor Axis Strength

26 kN

8 kN

Open Gate Strength

Weight

7 kN

65 g

High capacity asymmetrical steel connector with large opening to assist with connections to metal anchors. Its capacity allows it to accommodate multiple items. 73 mm

Strong points • Triple

action 3-MATIC locking system. • Individual serial number. • Keylock system.

Ref: BMCLBLN3

24 mm

Asymmetrical aluminium screw gate connector with large capacity and opening to accommodate multiple items. Its generous loading surface and HMS shape facilitate its use with Clove and Italian hitches. 76 mm

121 mm

Strong points 22 mm

• Individual

Major Axis Strength

Minor Axis Strength

26 kN

8 kN

198 g

Major Axis Strength

Minor Axis Strength

52 kN

16 kN

Open Gate Strength

Weight

18 kN

251 g

Open Gate Strength

Weight

8 kN

86 g

Auto-locking aluminium connector with large opening. Ideal for connections to cables, bars and beams.

121 mm

22 mm

lock- unlocking trigger. serial number.

26 kN

8 kN

Minor Axis Strength

Résistance grand axe

Auto-locking aluminium connector with very large opening. Ideal for connections to cables, bars and beams.

Weight

100 g

Poids

Open Gate Strength

50 mm

•D  ouble

5 kN 85 mm

16 mm

71 mm

Ref: BMCLFL

Minor Axis Strength

10 kN Weight

81 g

• Individual

lock- unlocking trigger. serial number.

110 mm

920 g

360 mm

NEW 20 kN

25 kN

165 mm

Strong points

FLAT LINK Major Axis Strength

Ref: BMC60

AIR-HOOK XL

8 kN

• Ergonomic

Strong points

251 g

Poids

• Ergonomic

Ref: BMCLBL3

Symmetrical, trapezoidal shaped aluminium karabiner designed to connect the top and bottom parts of a full body harness. Its flat working surface ensures the webbing is properly seated. The FLAT LINK was designed to be compatible with the HOLD UP chest ascender.

Weight

18 kN

475 g

240 mm

Major Axis Strength

Open Gate Strength

• Triple

16 kN

Open Gate Strength

22 kN 120 mm

60 mm

76 mm

Minor Axis Strength

52 kN

Résistance grand axe

Strong points • Individual

Strong points

Major Axis Strength

AIR-HOOK LARGE

Ref: BMCLBL

Symmetrical aluminium screw gate connector with large capacity and opening to accommodate multiple items. Its generous loading surface and HMS shape facilitate its use with Clove and Italian hitches.

32

Weight

8 kN

CONNECTOR

BE LOCK 3-MATIC

action locking gate. • Individual serial number. • Keylock nose.

16 kN

Open Gate Strength

Ref: BMCLAS3

BE lock

action 3-MATIC locking system. • Individual serial number. • Keylock system.

Minor Axis Strength

30 kN

Ref: BMCLAS

114 mm

108 mm

• Triple

lock system. serial number. • Keylock system.

Major Axis Strength

AIR-SMITH 3-MATIC

Asymmetrical aluminium connector for lanyards or for use with belay devices. The asymmetrical shape helps to guide the device towards the connector’s apex.

• Screw

114 mm

108 mm

• Screw

action 3-MATIC locking system. • Individual serial number. • Keylock system.

179 g

Ref: BMCLOS3

BE LINK

lock system. serial number. • Keylock system.

Weight

8 kN

METAL

61 mm

Major Axis Strength

Ref: BMCLOL3

• Individual

16 kN

Open Gate Strength

Symmetrical oval shaped steel connector.

Strong points

action 3-MATIC locking system. serial number. • Keylock system.

Minor Axis Strength

30 kN

O’SMITH 3-MATIC

Symmetrical aluminium oval shaped connector for use with equipment with swivelling side plates such as pulleys, rope clamps, mobile fall arrest devices, etc…

• Individual

Major Axis Strength

Ref: BMCLOS

O’LIGH T 3-MATIC

• Triple

56 mm

• Individual

109 mm

lock system. • Individual serial number. • Keylock system.

111 mm

• Screw

Major Axis Strength

Ref: BMC110

Working load limit

Breaking load (Kg)

Weight

1

1

STANDARD GALVA 8 mm

700

3500

77 g

BMMNZ08

2

STANDARD GALVA 10 mm

1100

5500

137 g

3

LONG OPENING GALVA 7 mm

500

2500

60 g

4

Pear galva 10 mm

720

3600

185 g

5

DELTA GALVA 8 mm

550

2750

88 g

6

DELTA GALVA 10 mm

990

4500

153 g

7

MAILLON SEMI CIRCULAR 10 mm

990

4500

153 g

Name

2

3

4

BMMGOZ07

BMMNZ10

5

6

BMMDZ08

BMMPZ10

7 BMMSCZ10

BMMD10

33


LOCKING CONNECTOR twin gate Twin Gate is a revolutionary concept for locking a karabiner, patented by Grivel/Simond It is incredibly simple and can be worked using just one hand. Unintentional opening is nearly impossible. In addition, the locking mechanism cannot become jammed. 2 versions are available: • A solid and wire gate combination which open in opposite directions. •Two solid gates which open in opposite directions.

Twin Auto Belay Compact asymmetrical locking karabiner for use with a lanyard or belay device. Features the Twin-Gate concept with a second wire gate. use

Ideal for use with a belay device or lanyard which are guided towards their correct position at the karabiner’s apex.

• TWIN

GATE Concept • High strength • KEYLOCK nose system •E  xcellent balance between strength and weight

Minor Axis Strength

Open Gate Strength

9 kN

Weight 23 mm

57 g

Ref: BMCTAB

Twin Belay D Versatile mid-sized, asymmetrical HMS karabiner for use with single, half or twin ropes. Features the Twin-Gate concept with second wire gate. Strong points

Minor Axis Strength

70 mm

11 kN

Open Gate Strength

9 kN

Weight

69 g

98 mm

Belaying and abseiling

GATE Concept • High strength • KEYLOCK nose system

Major Axis Strength

NEW

EN 12275 H EN 362 B

TWIN GATE

30 kN

use

• TWIN

62 mm

11 kN 101 mm

Strong points

Major Axis Strength

30 kN

NEW

EN 12275 B EN 362 B

TWIN GATE

24 mm

METAL

Ref: BMCTBD

Twin belay pear Versatile mid-sized, symmetrical HMS karabiner for us with single, half or twin ropes. Features the Twin-Gate concept with two gates that open in opposite directions. Strong points

Belaying and abseiling

• TWIN • High

Minor Axis Strength 71 mm

10 kN

Open Gate Strength

10 kN

Weight

83 g

20 mm

102 mm

GATE Concept strength • KEYLOCK nose system

Major Axis Strength

29 kN

use

NEW

EN 12275 H EN 362 B

TWIN GATE

Ref: BMCTBP

Twin O An oval automatic locking karabiner designed for use with equipment with swivelling side plates such as pulleys and descenders. The TWIN O is equipped with the TWIN-GATE concept and its two opposing gates. The absence of a traditional locking barrel reduces the potential of the karabiner becoming incorrectly positioned.

Open Gate Strength

use

Pulleys and pulley systems

• TWIN

GATE Concept • High strength • KEYLOCK nose system

Minor Axis Strength 58 mm

9 kN

8 kN

Weight 24 mm

86 g

Ref: BMTCO

Twin Guide A unidirectional automatic locking karabiner. An internal wire gate prevents the karabiner from becoming inverted and means the load remains well positioned along the long axis, for example at the end of a lanyard. The TWIN GUIDE is equipped with the TWIN-GATE concept and its two opposing gates. The absence of a traditional locking barrel reduces the potential of the karabiner becoming incorrectly positioned.

Major Axis Strength

22 kN

GATE Concept • High strength

• KEYLOCK

nose system

Minor Axis Strength 73 mm

9 kN

Open Gate Strength

Weight

89 g

24 mm

Ref: BMTCG

Twin Smith captive A large capacity and high strength (45kN) asymmetrical steel locking karabiner. The TWIN SMITH CAPTIVE features the TWIN-GATE concept with a second wire gate that opens in the opposite direction. GATE Concept strength • KEYLOCK nose system • High

34

Particularly suited to clipping into anchors and fixed lines, or for arborist work restraint. Its removable captive bar holds the TWIN SMITH CAPTIVE in place on equipment it is clipped into.

NEW

EN 12275 H EN 362 B

Major Axis Strength

45 kN

Minor Axis Strength

18 kN

Open Gate Strength

17 kN Ref: BMCTSC

Weight

29 mm

116 mm

• TWIN

use

117 mm

• TWIN

NEW

EN 12275 H EN 362

TWIN GATE

8 kN

Strong points

Strong points

110 mm

Strong points

Major Axis Strength

24 kN

NEW

EN 12275 B EN 362 B

TWIN GATE

228 g 73 mm

35


PULLEY

PULLEY 83 mm

Large single pulley with swivelling side plate. Stainless steel axle and washer. The sheave is mounted onto a bronze collar to promote a good level of efficiency. Maximum Ø ≤ 16 mm. EN12278: 1998. Strong points

Compatible diameter

Maximum load

Weight

max 16 mm

MBS 30 kN

270 g

• Unique

number. • High maximum working load.

Transf’air Twin B 118 mm

Trans’fair 1

NEW

A double pulley with two inline stainless steel sheaves mounted on ball bearings. The TRAINSF’AIR Twin B is specifically designed for intensive use on rope or wire zip lines.

cable

Strong points

rope

• Two

Ref: BMP1

stainless steel in-line sheaves increase stability. • Ball bearings ensure consistent efficiency regardless of the user’s weight. • Can accommodate up to 3 karabiners. • Individual serial number.

Compatible diameter

Maximum load

Weight

max 13 mm

MBS 30 kN

282 g

Compatible diameter

Maximum load

Weight

max 11 mm

MBS 20 kN

120 g

108 mm

Ref: BMPTB

usage

Trans’fair 1B

Intensive use in load transfers or pulley systems.

max 16 mm

MBS 30 kN

280 g

Ref: BMP1B

TransF’air Mini Compact and lightweight pulley with swivelling side plate. Stainless steel axle and washer. The sheave is mounted onto a bronze collar to promote a good level of efficiency. Maximum Ø ≤ 11 mm. EN12278: 1998. 68 mm Strong points • Unique

Trans’fair 2

83 mm

Large double pulley with swivelling side plate well suited for use in pulley systems. Stainless steel axle and washer. The sheave is mounted onto a bronze collar to promote a good level of efficiency. Maximum Ø ≤ 16 mm. EN12278: 1998. Strong points

number. • Swivelling side plate.

Compatible diameter

Maximum load

Weight

max 16 mm

MBS 30 kN

476 g

number. side plate.

• Swivelling

Ref: BMP2

Trans’fair 2B Maximum load

Weight

max 16 mm

MBS 30 kN

500 g

Strong points • Unique

number. • Lightweight.

45 mm

Compatible diameter

Maximum load

Weight

max 12 mm

MBS 20 kN

90 g

36

number. Ball bearings.

mm holes allow connectors with locking barrels to be inverted easily. • Individual serial number.

MBS 45 kN WLL 9 kN

23.5 mm 20 mm

Weight

92 g

Aluminium rigging plate which can accommodate 8 connectors. Strong points • 20

mm holes allow connectors with locking barrels to be inverted easily. • Individual serial number.

Compatible diameter

Maximum load

Weight

max 13 mm

MBS 22 kN

120 g

Compatible diameter

Maximum load

MBS 45 kN WLL 9 kN

23.5 mm 20 mm

Weight

188 g 173,6 mm

Ref: BMAP8

84,5 mm

Twist’air B

45 mm

Compact aluminium swivel with ball bearings to optimise performance even when loaded. 39 mm

Strong points • Individual

Ref: BMPFB

Maximum load

Air-port 8

Ref: BMPF

Strong points • Unique

• 20

Compatible diameter

Ref: BMAP4

Trans’fair Fixe B Pulley with fixed side plates and ball bearings for optimal efficiency. Its compact and lightweight nature make it easy to handle. Allows a pulley system to be set up by adding a component such as an ascender. Maximum Ø max ≤ 13 mm. EN12278: 1998.

Strong points

Ref: BMP2B

Trans’fair Fixe Compact and lightweight pulley with fixed side plates. Stainless steel axle and washer. The sheave is mounted onto a bronze collar to promote a good level of efficiency. Maximum Ø ≤ 12 mm. EN12278: 2007.

85,2 mm 150 mm

Compatible diameter

85,4 mm

Intensive use in load transfers or pulley systems

Aluminium rigging plate which can accommodate 4 connectors.

83 mm

82 mm

bearings serial number • Swivelling side plate • Individual

usage

Air-port 4

NEW

82 mm

Highly efficient double pulley with swivelling side plates thanks to a ball bearing mounted sheave. Its swivelling action allows the pulley to be positioned anywhere along the rope, whilst the ball bearings ensure maximum efficiency and durability. Ideal for intensive use with large ropes diameters. Stainless steel axle and washers. • Ball

Ref: BMPMINI

RIGGING PLATE and swivel

• Unique

Strong points

METAL

usage

Weight

80 mm

bearings. • Individual serial number. • Swivelling side plate.

Maximum load

serial number. • Ball Bearings.

84 mm

• Ball

86 mm Compatible diameter

150 mm

Strong points

NEW

118 mm

Highly efficient single pulley with swivelling side plate and ball bearing mounted sheave. Its swivelling action allows the pulley to be positioned anywhere along the rope, whilst the ball bearings ensure maximum efficiency and durability. Ideal for intensive use with large rope diameters. Stainless steel axle and washers.

76 mm

Rope or wire zip lines

Compatible diameter

Maximum load

Weight

MBS 22 kN WLL 4 kN

18 mm

88 g

Ref: BMSW

37


FALL ARREST

FALL ARREST

Monitor

Hands up

stop

11 mm

Aluminium mobile fall arrest device with swivelling side plate.

Handled ascender with ergonomic design to aid rope ascents with one or two hands.

Strong points

Strong points

• Mobile

• Can

be used to compliment the HOLD UP chest ascender or any other ascender for rope ascents • Large lower attachment hole easily accommodates the connector for the AIR STEP foot loop. • The ascender’s shape allows it to be held with two hands when ascending rope: one on the side beneath the trigger and one above it. • The handle is reinforced to improve ergonomics and comfort. • Large lower attachment hole can accommodate multiple karabiners and maillons. • All-metal construction of the operating mechanism to increase durability • An ergonomic protruding lever facilitates cam operation.

Ref: BMFAM

Weight: 265g

235 mm

fall arrest device with camming action. Cam function reduces abrasion to the rope when activated. • M  eets the requirements of the following standards: EN 353-2, EN 12841-A 100 Kg diameter 11-13 mm (EN1891). • Rescue : maximum 200 kg, ø11-13 mm. • Swivelling side plate allows for ease of installation on the rope. • A  lateral brake converts the MONITOR into a rope clamp for work positioning. • Easily locks as a result of a fall. • Easily follows the operator both during ascent and descent. • Marked with a unique serial number. • T  he MONITOR can be complimented with a MOBILE-LANYARD and its 2 attachment points.

CE EN 567 : 2013, diameter 8-13mm CE EN 12841: 2006-B, diameter 10-13mm 100kg

NEW 110 mm BMBHAR

Positioning of hands

METAL

GO

Mobile-Lanyard Lanyard with 2 attachment points. The MOBILE-LANYARD is certified to work with the MONITOR mobile fall arrest device, enabling it to be positioned away from the operator. Allows the operator to create a short or longer link dependant on their needs: Short link for work on a gentle slope or to limit the length of a fall (20 cm). Longer link to distance the rope from the operator and to gain freedom of movement (40 cm).

Hold up

Strong points • I ncludes

two PINCH’s to ensure the correct orientation of the connector at its extremity. • Marked with a unique serial number.

CE EN 567 : 2013 diameter 8-13mm CE EN 12841 : 2006-B diameter 10-13mm 100kg

A compact ventral ascender for ascending ropes

Strength: 2200 daN (kg)

Strong points

Ref: BFAL

Air-Kit 11 mm

stop

81,6 mm

attachment hole protrudes from the ascender’s body at a 90 degree angle. This ensures the device remains both upright and parallel to the user’s body and allows the rope to easily slide through the device. • Positioned low on the harness to maximise progression with every move. • All-metal construction of the operating mechanism to increase durability. • An ergonomic protruding lever facilitates cam operation. • Compatible with all PRO harnesses through the use of a FLAT LINK connector, which connects the harness to the ascender.

NEW

• The

74 mm

Weight: 90 g

11 mm

Specific kit to create a mobile fall arrest system (EN 353-2 and EN12841-A 100 Kg) especially adapted to vertical work or work on inclined surfaces. BMHO Kit includes •A 

MONITOR mobile fall arrest device. MOBILE-LANYARD with 2 positions: 20 cm and 40 cm. 2  O’LIGHT 3-MATIC connectors to attach the lanyard to both the MONITOR and the harness. C  onnectors: two O’LIGHT 3-MATIC and one BE LOCK 3-MATIC.

• A  •

• A • •

length of rope 10 m / 15 m / 20 m / 30 m / 50 m / 60 m with a 11 mm diameter with sewn termination protected by a reinforced eye. 1 BE-LOCK 3-MATIC connector to attach the rope to the anchor point.

Air-step Adjustable footloop with quick adjusting system around the foot for ascending fixed ropes with an ascender. Strong points

Strong points •R  emovable

cover allows the inspection of termination stitches • P  roducts marked with a unique serial number and equipped with a label to accommodate personal markings as well as a QR code to assist traceability. • 10 m and 30 m - Orange. • 15 m and 50 m - Blue. • 20 m and 60 m - Red.

• Quick

adjsuting system with ON / OFF function. In the ON position, the user’s foot stays locked in the footloop. In the OFF position, the adjustment system does not engage, meaning the user’s foot is not locked. • A large buckle facilitates adjustments of the footloop, even when wearing gloves. • A stiffener in the loop helps to place a foot inside it. • Reinforced with webbing to help protect against abrasion.

• Each

length is represented by a colour for quick and efficient identification of both its length and diameter:

OFF

ON

USe

10 m BFAK11.10 30 m BFAK11.30

• Gone

15 m BFAK11.15

back up on rope

BSTEP

Weight: 75 g

50 m BFAK11.50 20 m BFAK11.20 60 m BFAK11.60

38

39


DESCENDER

LADDER

D4

LADDER

Steel auto-locking descender with anti-panic function designed for increased durability within a work at height or rescue environment.

Metal ladder with aluminium rungs of 12.5 mm diameter and flexible 4 mm steel wire sides.

Strong points

safety features: the anti-panic function is triggered and stops the descent immediately when the user pulls the handle too abruptly; the descent is automatically stopped when the user lets go of the handle. •T  hick metal in high friction areas helps to increase the device’s lifetime in high use environment. •T  he handle allows the rate of descent to be finely controlled and its 360 degree rotation facilitates its use. Its aluminium body is covered with a grip enhancing material. In addition, an audible clicking sound accompanies the handle’s rotation to help the user to identify the handle’s correct position. •T  he device is locked using a metal button which prevents it from accidentally opening whilst ascending a rope. •M  ovement along horizontal or low incline surfaces is made easy by simply controlling the cam with your thumb. •T  he D4’s maximum working load is 240 kg. It is therefore suitable for rescues with a two-man load, without having to introduce additional friction. •T  he D4 can be used with 10.5 to 11.5mm diameter ropes.

NEW

Handle rotation in use

•2 

Strong points • E ach

end is fitted with swaged eyes and thimbles. • T hey can be joined together with maillon rapides. • R ung spacing is 25 cm.

Initial position

Descent Moved back to original position

• 4mm GALVA WIRE SWAGED EYE 5 m • 4mm GALVA WIRE SWAGED EYE 10 m

Anti-panic brake

Ref: GALVA WIRE (5 m): BLL405 Ref: GALVA WIRE (10 m): BLL410 Initial position Descent

Uses

Ref: BMDD4

• Controlling

Anti-panic brake

LADDER POU CH

Weight

Max. load

Rope diameter

Speed of descent

Material (body)

Material (came)

Finish

Breaking load

Length (mm)

Width (mm)

Thickness (mm)

Anti-panic brake

Number of usersteurs

Operating temperature

655 g

240 kg

10,5/11,5 mm

2 m/s

Aluminum

Stainless steel

Anodisation

16kN (3597lbf)

140

82

98

Yes

2

Between -40° et +45°

METAL

the descent • Easily move over horizontal or low incline surfaces • The façon instinctive refer to work positioning • Allows for short rope ascents.

Cover to store rolled-up flexible ladders.

Strong points • Cover for ladders up to 10 m in length. • Made

of very sturdy PVC. colour.

• Luminous

Air Stop Auto-block descender with anti panic function for a single rope. Strong points • Maximum

working load of 130 kg with 9 mm rope, and up to 200 kg with ropes from 10 to 12 mm. • Anti-panic function with 2 blocking positions. • The maximum authorised speed of descent is 2 m/s. • Useable on a wide spread of rope diametres from 9 to 12 mm (EN12841-C). • Long control lever for a more progressive feel. • Rope can be inserted into device without unclipping it. • Unique serial number.

Ref: BLLS10Y

Ref: BMDAS

Ys Spreader Y Extension to anchor a flexible metal ladder to a single point.

Strong points

Air Force 8

• 4

mm galvanised steel wire. 1000 kg.

• Strength

Classic, robust and easy to use belay device. It is compatible with a large range of rope diameters whether single, double or twin. The friction can easily be varied whatever the condition of the ropes (frozen, wet, different diameters…).

Ref: BLLY4

Ref: BMDAF8

40

41


bags Pro Work 35 Contract 35 litre transport sac – simple and effective.

Strength 100 kg

Strong points

• HF welding. • Reinforced base. • Metal adjustment buckles. • Identification window. • Side transport handle. Identification window. Capacity

Weight

Height

Width

35 L

735 g

70 cm

30 cm Ref: BSAC.PW35C

Pro Work 35 35 litre ergonomic transport sac including a waterproof external pocket.

Strength 100 kg

Strong points

• HF welding. • Reinforced base. • Ergonomic padded back. • Comfortable carrying straps. • Metal adjustment buckles. • Identification window. • W aterproof external pocket. • Side carrying handle Capacity

Weight

Height

Width

35 L

1080 g

70 cm

30 cm

PACKS

Personalisation window

Ref: BSAC.PW35

Pro Work 45 Large 45 litre capacity transport sac specially adapted to heavy load carrying. A comfortable belt complements the ergonomic shoulder straps and a padded back. Waterproof exterior pocket and large under-lid pocket to cater for smaller personal items as well as lifetime record sheets. A transparent window aids in identification.

Strength 100 kg

Strong points

• HF welding. • Reinforced base. • Comfortable belt and straps. • Ergonomic back padding.

• Metal adjustment buckles. • Identification window. • W aterproof exterior pocket. • Side carrying handle.

Capacity

Weight

Height

Width

45 L

1525 g

60 cm

30 cm

Personalisation window

Ref: BSAC.PW45

Pro Work 60 Very large 60 litre capacity transport sac with wide, stiff opening well adapted to rescue and large volume carrying requirements. A large waterproof transparent window allows you to see the sac contents. 2 very strong carrying handles help with handling heavy loads.

Strength 100 kg

Strong points

• Large rigid opening. • High Frequency welding. • Comfortable shoulder straps and belt.

42

• Ergonomic padded back. • Metal adjustment buckles.

Capacity

Weight

Height

Width

60 L

1825 g

75 cm

35 cm

Ref: BSAC.PW60

43


bags

bags

Combi Pro 40

Pro Rescue 40

Bag for professionals who require quick and easy access to their kit.

Rescue bag ideal for rapid access operations. Capable of taking 30 metres of rope and basic hardware. Ref: BSAC.CP40

• Benefits from BEAL’s ‘QUICK RELEASE’ system to accelerate access • to the bag’s contents via two back panel sections. • Once opened, the bag can be folded out to reveal its neatly • organised contents. • Multiple internal dividers and gear loops improve the kit’s layout. • A clear, external panel can be personalised to promote identification • or used to list the bag’s contents. • Ergonomic shoulder straps and waist belt. • Sternum strap with emergency whistle. • Hauling loop at the top of the bag. • 1 lateral carry handle. • Reflective and fluorescent patches. • PVC 1100 g/m².

Capacity

Weight

Height

Width

38 L

1960 g

60 cm

21 cm

Strong points

• Lid with transparent internal pocket to list contents. • A clear, external panel can be personalised to promote identification. • Adjustable shoulder straps. • W ebbing loop under the bag to be able to guide it from the bottom via a ‘tag line’. • 1 removable, internal daisy chain gear loop. • 1 lateral carry handle. • Robust 650 g/m² PVC material.

Weight

Height

Width

40 L

900 g

60 cm

30 cm

Ref: BSAC.PR40

Pro Rescue 60

Usage example (bag sold without contents)

Rescue bag ideal for rapid access operations. Capable of taking 60 metres of rope and basic hardware.

Combi Pro 80

Strong points

Bag for professionals who require a large volume, yet maintaining quick and easy access to their kit. Strong points

• Benefits from BEAL’s ‘QUICK RELEASE’ system to accelerate access to the bag’s contents via two back panel sections. • Once opened, the bag can be folded out to reveal its neatly organised contents. • Multiple internal dividers and gear loops improve the kit’s layout. • The COMBI PRO 80’s integrated rope bag contains a large ground sheet for immediate use of the rope without it twisting. • A red buckle identifies the bottom end of the rope, whilst a green buckle identifies the top end. • Lateral carry handle. • Generously sized ground sheet 60 cm x 80 cm. • Bag stores up to 60 m of rope. • A clear, external panel can be personalised to promote identification or used to list the bag’s contents. • Ergonomic shoulder straps and waist belt. • Sternum strap with emergency whistle. • Hauling loop at the top of the bag. • 1 lateral carry handle. • Reflective and fluorescent patches. • PVC 1100 g/m².

Capacity

Weight

Height

Width

45 L

2500 g

60 cm

26 cm

Usage example (bag sold without contents)

44

Capacity

PACKS

Strong points

Ref: BSAC.CP80

• Lid with transparent internal pocket to list contents. • A clear, external panel can be personalised to promote identification • Adjustable shoulder straps. • W ebbing loop under the bag to be able to guide it from the bottom via a ‘Tag line’. • 1 removable, internal daisy chain gear loop. • 1 lateral carry handle. • Robust 650 g/m² PVC material.

Capacity

Weight

Height

Width

60 L

1000 g

60 cm

35 cm Ref: BSAC.PR60

Commande Bag Small capacity bag to hold small volume cords and ropes. Strong points

• Made of strong PVC. • Mesh base to promote drying. • Fitted with an eyelet for fastening a rope. • Strap to wear as a bandolier. • Volume: 9 litres. Capacity

Weight

Height

Width

9L

200 g

40 cm

15 cm

Ref: BSAC.COM

45


Work station

WORK STATION

Work station Bucket Hat

Key features

Products within the WORK STATION range provide a complete solution for attaching and organising a work station. Different products from the range can be combined in a modular way to suit the work environment and users’ needs: builders, rope access technicians, craftsmen…

• Improves posture, reducing the potential for physical injury • Improves efficiency by reducing unnecessary movement • Enhances safety by reducing the possibility of dropping work tools • Reduces costs by a reduction in loss of work tools

A removable lid for the GENIUS BUCKET PLUS. Designed to protect items inside the GENIUS BUCKET PLUS from bad weather, dust etc. and to restrain the contents during transit and whilst hauling.

NEW

Fitted using clips.

GENIUS SIMPLE and GENIUS TRIPLE Bags for carrying small tools and fastenings. The clic clac express closure stops the pocket contents getting lost. A magnetic plate allows temporary storage on the outside of the pocket. Available as a single pocket and an assembly of 3 with external tool carriers.

Clic clac system Ref: BSAC.BH

Glass Bucket

Strong points

• Express closure. • Easy to attach to the harness. Type

• Rigid opening. • Magnetic plate. magnetic plate

Capacity

Weight

Height

Width

Max. load

Simple

1,5 L

180 g

25 cm

15 cm

50 kg

Triple

4,5 L

560 g

75 cm

45 cm

150 kg

A small transparent bucket for organising bolts, screws and other small items whilst leaving contents easily visible. The CLIC CLAC system can be used to quickly close the bag and prevents loss of contents during transport. 2 external mini karabiners are fitted to connect the GLASS BUCKET to the GENIUS BUCKET, HERO PRO, SYNCRO and STYX harness or to the AIR-SIT work seat.

MAGNETIC

GENIUS SIMPLE Ref: BSAC.G

Clic clac system

NEW

MAGNETIC

magnetic plate

Capacity

Weight

Height

Width

1,8 L

115 g

14 cm

16 cm

GENIUS TRIPLE MAGNETIC

Ref: BSAC.GT

Genius Bucket

Long Tool Bucket

A 20 litre bucket for carrying tools as well as small screws and fittings thanks to the 3 GENIUS CLIC CLAC pockets attached to the inside. The large opening with stiffener allows easy access to its contents. Strong points • Rigid carrying handle, • Easy, convenient access to with a minimum breaking tools. load of 100kg • CLIC CLAC pocket closure • Waterproof pocket. system. • Reinforced base.

Large size tool organiser bucket. The CLIC CLAC system can be used to quickly close the bag and prevents loss of contents during transport. Two mini external gear loops can be used to connect another BUCKET from BEAL’s range, an ATTRAC’TOOL magnet or an AIRLEASH extendable gear holder. Two external mini karabiners can be used to connect the LONG TOOL BUCKET to the HERO PRO, SYNCRO and STYX harness or to the AIR-SIT work seat.

Capacity

Weight

Height

Width

Max. load

20 L

1085 g

40 cm

40 cm

50 kg

Genius Triple inside

Ref: BSAC.GB

Capacity

Weight

Height

Width

5L

215 g

35 cm

16 cm

Clic clac system

WORK STATION

Ref: BSAC.GLB

NEW

Ref: BSAC.TBL

Genius Bucket Plus

Tool Bucket

A rigid 20 litre bucket for power tools such as a hammer drill, electric screwdriver or angle grinder; constructed with a clever ‘twist and fold’ function to reduce size for storage. Small gear loops on the outside and inside edges of the bag can be used to attach small CLIC CLAC pockets (TOOL BUCKET, GLASS BUCKET, LONG TOOL BUCKET) to organise your work station as you wish.

Ref: BSAC.GTB

Strong points

• Easy, convenient access to tools • Additional BUCKETs can be added • Rigid carrying handle with a minimum breaking load of 100kg

46

• ‘twist and fold’ function to reduce size for storage • Comfortable and adjustable shoulder strap helps to carry the bucket • Waterproof pocket • Reinforced base

Example with Tool Bucket

Capacity

Weight

Height

Width

Max. load

20 L

830 g

40 cm

40 cm

50 kg

NEW

Medium size tool organiser bucket. The CLIC CLAC system can be used to quickly close the bag and prevents loss of contents during transport. Two mini external gear loops can be used to connect the BEAL AIRLEASH extendable gear holder. Two external mini karabiners can be used to connect the TOOLBUCKET either to the HERO PRO, SYNCRO and STYX harness or to the AIR-SIT work seat.

Capacity

Weight

Height

Width

3,4 L

180 g

25 cm

16 cm

Clic clac system

Ref: BSAC.TB

47


Work station

Work station

Air Leash

attrac’tool

An extendable gear loop allowing tools to remain attached whilst in use.

A magnetic plate that allows you to temporarily attach a leash secured tool to an appropriate metal surface.

Consists of two sections

The ATTRAC’TOOL can be fixed to a belt or shoulder strap of the HERO PRO harness or to the small gear loops of a harness, BUCKET or TOOL BELT.

- An extendable spiral cord that attaches to the TOOL-BUCKET, GLASS BUCKET, LONG TOOL BUCKET, to the HERO PRO, SYNCRO and STYX harness, or the AIR-SIT work seat. - A gear loop that connects to the end of the spiral cord. This is designed to attach tools by means of a girth hitch or slipknot (it is important you select an attachment method appropriate for the specific tool).

NEW

When fitted to a harness’ waist belt, a strap can be clipped around the thigh to stop the magnet from lifting up when picking up the tool. The strap can also be used to hang the ATTRAC’TOOL from a railing.

A reinforced webbing loop on the gear loop allows the tool to be clipped to the harness using a karabiner between uses

MAGNETIC

The ATTRAC’TOOL is modular and can be positioned both vertically and horizontally depending on the tools used and the working environment.

magnetic plate

The gear loops are available separately. All tools equipped with gear loops can thus be independently connected to the spiral cord.

Ref: BAAT

Minimum length

Weight

Max length with 500g load

Maximum weight

45 cm

55 g

150 cm

500 g

SUPER Leash

WORK STATION

Ref: BAL

Tool belt

A webbing based extendable gear loop allowing tools to remain attached whilst in use. One end can be used to attach tools by means of a girth hitch or slipknot (it is important you select an attachment method appropriate for the specific tool). The other end is equipped with a screwgate mini-karabiner for attachment to a tool pouch or gear loop.

NEW

A waist belt with small gear loops for use with the TOOL BUCKET, LONG TOOL BUCKET, GLASS BUCKET, AIR LEASH and ATTRAC’TOOL. Webbing gear loops positioned around the belt allow the tools to be secured where convenient. The belt is reinforced to help spread out the weight of the tools on the waist.

Mini waist measurement

Maxi waist measurement

Width

Weight

70 mm

130 mm

50 mm

190 g

NEW

Ref: BATB Minimum length

Weight

Max length with 10 kg load

Maximum weight

70 cm

70 g

115 cm

10 kg

Ref: BALS

48

49


SLINGS Eye loop

EN 795B EN 354

Strong points:

• Perfectly adapted for work positioning at height. • The use of a dynamic rope can improve the level of safety.

• Sewn termination protected by a heat shrink cover. • Breaking load 2200 daN • Marked with a unique serial number

• Strength 30kN • Strength 22kN when used in a girth hitch configuration • Double thickness webbing with a red webbing liner. The liner acts as a wear indicator: the product should be retired when the red webbing becomes visible. • Strength of the red webbing 22kN

60 cm / 55 g Ref : BLDL60

120 cm / 105 g Ref : BLDL120

wear indicator

Diameter

 vailable in 4 lengths:  A • 60 cm yellow • 80 cm green • 120 cm red • 150 cm black Ref 60 cm : BSL.60 Ref 80 cm : BSL.80 Ref 120 cm : BSL.120 Ref 150 cm : BSL.150

Standard Certification

Weight per meter

Breaking Load

Material

Polyamide

4 mm

EN 564

CE/UIAA 11 g

400 daN (kg)

530 daN (kg)

5 mm

EN 564

CE/UIAA 19,5 g

650 daN (kg)

930 daN (kg)

Polyamide

5,5 mm Dyneema

-

CE/UIAA 20 g

1800 daN (kg)

2000 daN (kg)

Sheath: Polyamide Core: Dyneema

6 mm

EN 564

CE/UIAA 23 g

810 daN (kg)

1200 daN (kg)

Polyamide

7 mm

EN 564

CE/UIAA 31 g

1170 daN (kg)

1680 daN (kg)

Polyamide

8 mm

EN 564

CE/UIAA 40 g

1530 daN (kg)

2200 daN (kg)

Polyamide

• Width 19mm • Material: Polyamide

8 mm

Strong points:

EN 564

Multi-use: BEAL accessory cords from 4 to 8 mm in diameter conform to the requirements of the UIAA and European Standards.

7 mm

A heavy duty tubular webbing sling with connecting buckle and wear indicator.

6 mm

A dynamic rope sling for work restraint. The dynamic characteristics of this sling are far superior to those of a traditional static lanyard or webbing sling.

ACCESSORY CORDS

Dyneema 5,5 mm

EN 566 EN 354

5 mm

Dynaloop

4 mm

NEW

ACCESSORY CORDS AND WEBBING

Ref 4mm x 120m : BC04.120.Y/GY/V Ref 5mm x 120m : BC05.120.Y/R

Ref 6mm x 120m : BC06.120.O/B Ref 7mm x 120m : BC07.120.O

Ref 8mm x 200m : BC08.200.R/B Ref 5,5mmx50m : BC055DYN.50

Commande 7 mm - 30 m / 40 m / 60 m

150 cm / 135 g

7 mm cord with a sewn termination and karabiner on each end to guide rescues during the descent.

Ref : BLDL150

30 m

Strong points:

Anchor Strop

EN 795B

Ref: BCOM07.30

• Supplied with 2 karabiners secured by pinches. • The COMMANDE has an individual number. • Available in 30, 40 and 60 m lenghts.

40 m

Ref: BCOM07.40

Semi-temporary anchor made from 7 mm galvanised steel cable with plastic cover and 2 swaged terminations.

60 m

Ref: BCOM07.60

Strong points:

Ref 50 cm : BMANCH050 Ref 1m : BMANCH100

polyamide FLAT SLINGS

EN 566 - EN 795B EN 354

Flat slings 18 mm

WEBBING

dyneema FLAT SLINGS

EN 566 - EN 795B EN 354

EN 565

Tubular for their flexibility or flat for their durability, webbings are specifically used in belay slings. Cut webbing must always be tied with a tape knot.

Type

Tubular

Flat slings 10 mm idN

Strength: 2200 daN (kg)

idN

Individual idN number

Strength: 2200 daN (kg)

Flat

Individual idN number Tubular - 16 mm

50 cm 100 cm

30 cm 80 cm 175 cm

150 cm

100 cm 120 cm 150 cm 175 cm

Width

Standard

Flats

18 mm

Dyneema Flats

10 mm

EN 566 EN 795B EN 354

Certification

CE/UIAA

Weight per meter

Breaking Load

BST16.R

Material

Conditioning

16 mm

EN 565

CE/UIAA 31 g

1350 daN (kg)

1800 daN (kg) Polyamide

100 m

26 mm

EN 565

CE/UIAA 38 g

1500daN (kg)

2000 daN (kg) Polyamide

100 m

18 mm

EN 565

CE/UIAA 39 g

1600 daN (kg)

1800 daN (kg) Polyamide

100 m

26 mm

EN 565

CE/UIAA 35 g

1500 daN (kg)

1900 daN (kg) Polyamide

100 m

30 mm

EN 565

CE/UIAA 37 g

1600 daN (kg)

1950 daN (kg) Polyamide

100 m

45 mm

EN 565

CE/UIAA 55 g

2200 daN (kg)

2600 daN (kg) Polyamide

100 m

flat 26 mm

BSP18.B BSP26UNI.BK

BSP18.GY BSP26UNI.F BSP18.O

40 cm 120 cm

BST26.B

BSP26UNI.G BSP18.R

60 cm

Ref 100 cm Grey/Black : BSA100.5 Ref 120 cm Orange/Black : BSA120.5 Ref 150 cm Red/Black : BSA150.5

Ref 40 cm Orange/Black : BSA40.5 Ref 60 cm Red/Black : BSA60.5 Ref 80 cm Blue/Black : BSA80.5

Type

30 cm 40 cm 50 cm 60 cm 80 cm

Standard Certification

flat Super - 18 mm

BST16.G

Tubular - 26 mm

Width

SLINGS / ANCHORS

• Available in 0.5 m and 1 m lenghts. • Allows making of semi-temporary anchors. • Strength 2500 kg. • Weight: 50 cm = 260 g - 1 m = 434 g.

120 cm

Ref 60 cm/Grey : BSAD10.60.5 Ref 120 cm/Purple : BSAD10.120.5

180 cm

240 cm

Ref 180 cm/Red : BSAD10.180.5 Ref 240 cm/Blue : BSAD10.240.5

BST26.R

BSP26UNI.Y

BSP18.BK

flat 45 mm

Length

Weight

Breaking Load

Material

Conditioning

30  /  40  /  50  /  60  /  80  /  100  /  120  /  150  /  175 cm

60 cm = 48 g

2200 daN (kg)

Polyamide

5

60  /  120  /  180  /  240 cm

60 cm = 19,8 g

2200 daN (kg)

Dyneema

4

BST26.BK

BSP45

50

51


ROPE PROTECTORS

ROPE PROTECTORS

Protector

Hot-Protector

Rope defender

A rope can wear very rapidly over a sharp edge. To protect it, use the PROTECTOR, an ultra-solid rope protector made of two layers of coated material.

Made of glass fibre and aluminium, the HOT PROTECTOR is a patented rope protector resistant to heat, welding spatter, angle grinder, or a blowlamp flame - for a short time. Placement is facilitated by a magnetic closure.

Flexible sleeve made from coiled steel which serves to protect ropes from sharp edges. Thanks to its flexibility, it adapts to all angles. The spirals that are in contact with the edge squeeze together under the rope’s movement therefore ensuring total protection. The steel sleeve is virtually indestructible. Its reinforced rubber protecting cover exists as a separate part and may be easily replaced.

Length: 70 cm Weight: 150 g

Strong points:

Strong points:

• Increased resistance to heat. • Easy to close thanks to its magnets. • Can be independently positioned on hot metal surfaces.

• Virtually indestructible steel sleeve. • Removable protective cover.

Length: 50 cm Weight: 730 g

Length: 70 cm Weight: 180 g

Edge Guard

Croco

Rope protector in stainless steel to protect a rope moving over a sharp edge.

Universal clamp to secure different rope protectors onto a rope. The CROCO replaces the use of cord with a Prusik loop and other temporary attachment methods. Fitted with a cable and a small karabiner, it attaches easily to any rope protector on the market. Being independent of the rope protector, the CROCO can be reused when the rope protector has to be replaced.

Ref : BPRH

Ref : BPR70

Strong points:

• Modulable - can be linked together with maillon rapides. • Secure with 2 cords (supplied). • 2 side plates prevent the rope from leaving the rail.

Weight: 300 g

Rope Armour

Rope protector reinforced on both sides by a tape for better abrasion resistance. Installation facilitated by a magnetic closure.

A patented woven metal sheath, serving to protect the rope or lanyard from edges or sharp tools. This supple armour is much more durable and effective than conventional rope protectors. The ROPE ARMOUR has to be fixed around the rope, then positioned along it where protection is necessary: metal edges, roof corners, where there could be contact with angle grinders, drills… Compact in store or when positioning on the rope, it lengthens after being put in place.

Strong points:

• Increased abrasion resistance. • Easy to close thanks to its magnets. • May be independently positioned on metallic surfaces.

Length: 70 cm Weight: 260 g

Strong points:

• Adapts to all ropes from 9 to 12 mm. • Attaches quickly to all rope rotectors on the market. • Reusable. Ref : BPREG

Length: 23 cm Weight: 40 g Ref : BPRCROCO

ROPE PROTECTORS

Magnetic protector

Ref : BPRD

MAGNETIC

MAGNETIC

Strong points:

52

Material: No. 65 galvanised steel Length deployed: 70 cm Length retracted: 16 cm Weight: 250 g

Ref : BPRAR

Ref : BPRM

• Metallic sheath very resistant to cutting. • Very light and supple. • Concertinas to reduce in size.

53


RESCUE KIT

GLOVES AND ACCESSORIES ASSURE

RESCUE KIT

ladder kit

Allows the evacuation of a person by the outside of a building or from a pit or a ditch, up to a height limit of 30 m. Equally useful in interventions at height or on horizontal progressions to protect against falls.

Allows the same uses as the RESCUE KIT but with a carrying limit of 60 m.

Pro rescue 40

Pro rescue 60

STYX RESCUE

PRO RESCUE 40

EN 420 EN 388

BEAL has developed a special ink for marking ropes, in the middle as well as at the ends. This ink hardly stiffens the rope, is water resistant, and stands up to abrasion well. NB: it does not affect polyamide. The container has a small roller at the tip for better inking. With one container of ROPE MARKER you can make 30 marks of 5 cm.

Mitts, entirely in leather, reinforced palms. Strong points: • Ultra

supple, natural grain leather. for attachment to harness. • Reinforced palm. • Loop for karabiner clipping. • Leaves the fingertips free. • Loop

Ref: BGA.S / BGA. M / BGA. L / BGA. XL / BGA. XXL

STYX RESCUE

PRO RESCUE 60

tri-angel

tri-angel

EN 420 (2003) General requirements for protective gloves: safety, comfort and dexterity EN 388 (2003) Protective gloves against mechanical hazards

Ref : BRM

Rope Brush

2122

ASSURE MAX

EN 420 EN 388

Gloves entirely in leather, with reinforced palm.

x 2

Rope marker

Strong points:

supple, natural grain leather. for attachment to harness. • Reinforced palm. • Loop for karabiner clipping.

A brush specifically created to clean ropes. Adapts easily to different diameters. Twist the brush onto the rope then run the rope through the brush while holding it firmly under water.

• Ultra • Loop

ERGO 12,5mm

Commande

Commande

Ref: BRB

Ref: BGAM.S / BGAM. M / BGAM. L / BGAM. XL / BGAM. XXL FLATSLING

30 m

EN 420 (2003) General requirements for protective gloves: safety, comfort and dexterity EN 388 (2003) Protective gloves against mechanical hazards

FLATSLING

30 m

60 m

60 m

commande bag

commande bag

x 5 150 cm

o-light

FLATSLING

air force 8

BE LOCK 3 MATIC

o-light

• Reinforced

to limit wear from the sliding rope. • Thick full grain leather • Loop to clip the gloves to the harness.

trans’fair fixe

Marking ticket kit

Ref: BGR.S / BGR. M / BGR. L / BGR. XL / BGR. XXL

x 1

x 6

x 1

x 1

x 5 80 cm

x 1

Combi Pro 40

x 9

x 1

x 1

2x 5 80 cm

EN 420 (2003) General requirements for protective gloves: safety, comfort and dexterity EN 388 (2003) Protective gloves against mechanical hazards

Pro rescue 80

STYX RESCUE

combi pro 40

3244

ROPE TECH GLOVES

STYX RESCUE

combi pro 80

Exemple d’utilisation

usage example

Hybrid gloves, half-leather palms, breathable stretch fabric on the back.

EN 420 EN 388

half

The kit consists of non-rotting labels and heat-shrink sheath to allow you to replace old rope endings, but more importantly to let you establish your own rope traceability. The label is non-tear and waterproof, the heat-shrink cover is very abrasion resistant.

Strong points: tri-angel

leather on the inside fingers for greater dexterity. • The palm is reinforced precisely where the rope runs. • The stretch textile on the back of the hand aids breathability and avoids sweating. • Loop to clip the gloves to the harness.

ERGO 12,5mm

Commande

EN 420 (2003) General requirements for protective gloves: safety, comfort and dexterity EN 388 (2003) Protective gloves against mechanical hazards

Commande

FLATSLING

30 m

60 m

Ref: BRE

(x 50) <80°

60 m

commande bag

commande bag

x 5 150 cm

Marking ticket kit XL Ref: B  GRT.S / BGRT. M BGRT. L / BGRT. XL / BGRT. XXL 3343

ROPE CLEANER

FLATSLING

30 m

Size = 20mm

• Thin

tri-angel

x 2

ERGO 12,5mm

10 m

EN 420 EN 388

Strong points:

BE LOCK 3 MATIC

trans’fair fixe

Ref : BRT

rappel gloves All-leather gloves, reinforced where the rope runs, specially adapted for descending the rope.

x 5 150 cm

FLATSLING

air force 8

Rope Band

2122

x 5 150 cm

Non-aggressive detergent developed to clean ropes and harnesses easily. Will not damage polyamide – water temperature < 30° C.

The kit consists of non-rotting labels and heat-shrink sheath to allow you to replace old rope endings, but more importantly to let you establish your own rope traceability. The label is non-tear and waterproof, the heat-shrink cover is very abrasion resistant.

Size = 85mm (x 25) <80°

KITS / GLOVES & ACCESSORIES

ERGO 12,5mm

Ref: BREP

NFC CHIP

Ref: BRC FLATSLING

air force 8 o-light

FLATSLING

air force 8

BE LOCK 3 MATIC

o-light

x 1

54

x 6

x 1

x 1

ROPE CUTTER

BE LOCK 3 MATIC

trans’fair fixe

trans’fair fixe

x 5 80 cm

x 1

x 9

x 1

x 1

x 5 80 cm

Ref: BCUT Ref: BNFC

55


LIGHTING

LIGHTING

headlamps - settings

Headlamps

MODES

For professionals to have effective lighting in all circumstances a simple long and straight light beam does not suffice, as in many situations a broad and homogenous beam is equally required.

Every light source has multiple settings; in addition to a powerful and an economic setting some models also feature medium and flashing settings.

BEAL’s range

• Maximum mode: the most powerful setting, providing an effective and intense output between 2 and 4 hours.

To better respond to the needs of some of the most demanding users, from electricians to rope access technicians, BEAL’s range uses multiple independent light sources on the majority of its models. In contrast to using a single light source, this solution allows for a source to be dedicated to an intended use. As a result some headlamp models have up to 3 independent light sources!

• Medium mode: the most favourable setting offering a compromise between light output and energy management. • Economic mode: this setting, with an output between 5 and 6.5 lumens, generates minimal consumption for a very long burn time. • Flashing mode: this setting works on the central light source or RED source and helps to draw attention when needed. The combination of light sources and various modes allows for perfect adjustments to suit the needs of your night vision, which at the same time results in excellent energy management. • TOTAL POWER Mode: a combination of both Flood and Focus modes, thus providing with a zoom, long reach output cumulated with a proximity wide output.

Optics Whether it is due to the lens or reflector, every LED is constructed from the highest quality in optical materials in order to emit an even and homogenous light beam. Swivelling optical body: all BEAL headlamps feature an articulated optical body which allows the light beam to be swivelled as required.

SOURCES Source N° 1 : A central LED, known as ‘FOCUS’, emits a far reaching and precise narrow beam. Source N° 2 : Lateral LEDs, known as ‘FLOOD’, emit light to allow comfortable and uniform peripheral vision without bright spots. Source N° 3 : Red LEDs, known as ‘RED’, allow for discreet lighting or efficient signalling in flashing mode. Every light source is thus dedicated to a particular use: ‘FOCUS’ to see far, ‘FLOOD’ for immediate surroundings and ‘RED’ for discretion in its constant mode or signalling in its flashing mode.

Individual Number

optical

DEPENDING ON THE LAMP, BEAL USES TWO DISTINCT TECHNOLOGIES: 1 • CLASSIC POWER : Conventional unregulated electronic circuit where output decreases over time but with the advantage of long burn times. 2 • CONTINUOUS POWER : Regulated electronic circuits allow for multiple constant output levels to suit the user’s preference. Depending on the chosen mode, constant lighting is provided between 2 and several hours.

BEAL head lamps are separated into 2 ranges

‘SPEED-SHIFT’ BATTERY REPLACEMENT

which indicate the key features of each one: • The L range - light and compact head torches • The F.F range - torches with a minimum of two light sources: ‘FOCUS’ and ‘FLOOD’

On models that feature battery compartments at the rear of the head, batteries can easily be changed with one hand by using the spare waterproof container. A clever ejection and locking system ensures waterproofness.

L. range

swivelling optical body

The number after the range indicates the maximum output in lumen: L28: Light + 28 lumens. F.F. 120: FOCUS & FLOOD + 120 lumens. F.F. range

LIGHTING

WATER RESISTANCE All of our headlamps are water resistant to at least the IPX6 standard, guaranteeing water resistance against a 100 l/min water jet from a 3 m distance. FF210 R

56

57


LIGHTING Ref : BEL24.BK

LIGHTING Ref : BEBV.Y

Ref : BEL28.TB

VISIBILITY

360°

Ref : BEL28.W

Be Visi Ref : BEL24.TR

Ref : BEL24.W

Ref : BEL24.TG

A lighting concept that ensures you are seen in all conditions.

Strong points:

Two WHITE and FLASHING light sources, FRONT and REAR, to which reflective side straps are added to provide 360 degrees of high visibility during night-time interventions.

• Front and rear lighting provides 360 degrees of visibility. • A flashing beam ensures you are seen, a constant beam lights up the path ahead. • Two light sources: 1 at the front and 1 at the rear. • White light for fair weather visibility. • Red light for poor weather visibility, rain or fog. • Reflective strips give side on visibility. • Burn time: 115h in front flashing mode and 80h in rear flashing mode.

L 24

L 28

It consists of two light sources: a L28 head torch at the FRONT with an L24 head torch at the rear. It also features a reflective fluorescent band for additional visibility from the sides.

With a surprising output of 24 lumens for its small size, this is the lightest in the ‘Light’ series. This ultra-light and compact headlamp has all the advantages of a larger variant: 2 independent light sources and 5 operation modes! • Source N° 1: A powerful LED with an exterior reflector for a focused and far reaching beam. - Maximum mode: for a focused and powerful light output up to 22 m of the ‘FOCUS’ variety. - E conomical mode for the maximum burn time up to 72 hours. - Flashing mode allowing efficient signalling in case of an emergency. • Source N° 2: 2 red LEDs. - Constant mode for discreet night vision (reading, mountain huts,…). - Flashing mode to draw attention. Multiple fitting methods: - Directly to the head using the 2 easily detachable elasticated cords. - To a cap using the spring-loaded clamp. - To the rear of another headtorch’s elasticated head strap for effective rear signalling in the work yard, whether it is poorly lit or not lit at all.

Light (70 g), compact but most of all very comfortable to use.

The WHITE and RED lighting modes can be used to adapt to any weather conditions: white for fair weather and red for fog or drizzle. A FLASHING beam ensures you are seen whilst the CONSTANT beam lights up the path ahead.

- 3 LEDs with built in reflector and lens. - Maximum mode for a reach of 27 m also gives excellent peripheral vision of the ‘FLOOD’ variety. - Medium mode for comfortable use and a good compromise between light output and energy consumption. - Economical mode for a maximum burn time. - Flashing mode to draw attention where needed.

With its contemporary design, the Be Visi meets all your requirements thanks to its modular nature. The L24 is separate from the headband, meaning you can also attach it to a collar, sleeve, hem of a jacket, shorts pocket, bag or belt!

- A weight of 70 g. - The elastic head strap is easily removable and washable. The L24 can be attached to the rear. Exceptional water resistance: IPX6

- The two Lithium Ion batteries may be stored up to 10 years without deterioration. - Weight 29 g including batteries. Exceptional water resistance: IPX6

FOCUS

Max

Max

Medium

Eco

Eco

LIGHTING

FLOOD

Sdis 73 © Vuedici.org / BEAL

58

59


LIGHTING

LIGHTING Ref : BEFF150.Y

Ref : BEFF120.TBK

Ref : BEL80.Y

Ref : BEFF150.BK

Ref : BEL80.GY

FF 150 The headlamp that provides close proximity lighting as well as a long distance lighting simultaneously. Its two buttons allow a second light source to be switched on and off independently whilst maintaining the first. Long and close proximity lighting, with the output spread between the two light sources. Lighting output remains constant for the battery’s duration by using ‘Continuous Power’ in the majority of settings. With 150 lumens in Total Power mode and up to a 60m throw for only 97 grams, the FF150 is the ideal head torch for all demanding outdoor activities, mountaineering or trail running. The settings are changed easily using two dedicated buttons; one controls the ‘Focus’ beam whereas the other controls the ‘Flood’ and ‘Red’ lights:

L 80

FF 120

With 80 lumens and 5 lighting modes, the L80 sets the standard in headlamp versatility.

A headlamp with 2 light sources weighing only 96 g. The FF120 is a headlamp highly suited to all outdoor activities, from mountaineering to trail running. It offers the choice between long, focused lighting for moving quickly or a broad beam for close proximity use. • Source N° 1 - Focus: A powerful central LED with reflector for a long and bright beam. - Maximum mode: 100 lumens and a focused lighting distance up to 100 m. - Medium Mode provides 45 lumens of ‘CONTINUOUS POWER’ for comfortable use without a drop in output over a pre-defined period of time. - Economical mode for a maximum burn time. - Flashing mode to draw attention where needed. • Source N° 2 - Flood: 2 powerful lateral LEDs each backed by a reflector for peripheral lighting. - Maximum mode: for highly comfortable peripheral vision even when moving quickly. - Medium mode: for pleasant and homogenous close proximity vision, without areas of bright spots. - The elastic head strap is easily removable and washable, and compatible with the L24 attached to the rear. - Individual number.

• Source N° 1: - A powerful LED with additional reflector. - Maximum mode of 80 lumens with a range of 40m and a very wide spread, type FLOOD. - Medium mode for comfortable use and a good compromise between light output and energy consumption. - Economical mode for a maximum burn time. • Source N° 2: - 1 red LED. - Constant mode for discreet night vision (reading, mountain huts, ...). - Flashing mode for drawing attention. - A weight of 96 g. - The elasticated head strap can be easily removed and washed, and is compatible with the L24 attached to the rear. - Individual number. Exceptional water resistance: IPX 6

• Source N° 1 - Focus: Powerful LED for focused long distance lighting when moving quickly - Medium mode: 50 lumens of Continous Power provides a comfortable amount of light without a loss in output. - Maximum mode: 110 lumens of Continous Power with a focused beam up to 60m. - Economical mode for a maximum burn time. • Source N° 2 - Flood: Powerful lateral LED for ultra-wide and homogenous lighting - Medium mode for comfortable and uniform close proximity lighting without bright spots. - Economical mode for ultra-close proximity lighting with a maximum burn time.

• Source N° 3: A constant red light setting for discrete lighting or efficient signalling in flashing mode. - Battery gauge - Individual number - Weight 95g - Easily detachable and washable headband is compatible with the L24 fitted at the back.

Exceptional water resistance: IPX6

Total Power: combines source N°1 and N°2’s maximum settings by pressing both buttons simultaneously.

FOCUS

Total POWER

Max

FLOOD

Max

Exceptional water resistance: IPX6 Medium

FOCUS

Max

97 g

Max

Medium

Medium

Eco

Eco

LUMENS

= 96 g 60g

60

36 g

Eco

FLOOD

6m

61 g

36 g

LIGHTING

FLOOD

= 96 g 60g

36 g

61


LIGHTING Ref : BEFF170.GY

LIGHTING

Ref : BEFF190.BK

Ref : BEFF210R.R

ACCU 1800 Ref : BEAC1800

Ref : BEFF210R.BK

BATTERY GAUGE

BATTERY GAUGE

FF 170

FF 190

FF 210 r

A 170 lumen headlamp armed with 3 independent light sources aimed at the most extreme activities, from the fastest to the longest.

An ultra-powerful 190 lumens headlamp possessing a second equally powerful independent light source armed with an ultra large reflector for incredible peripheral lighting! The ultra large beam limits eye fatigue by providing a broad, constant light eliminating the darkness.

A powerful rechargeable headtorch able to simultaneously provide both close proximity lighting as well as long distance lighting. Your eyes no longer constantly have to adjust from close proximity to long distance vision, the FF210 R does it for you. The chance of becoming dazzled and eye fatigue is therefore significantly reduced.

Exceptional water resistance: IPX6

Focus

• Source N° 1 - Focus: A powerful central LED with reflector giving a very long lighting distance. - Maximum mode: for a highly focused beam up to 150 metres. - Medium mode: for an excellent compromise between light output and energy consumption. - Economic mode: for maximum burn time. - Flashing mode to efficiently draw attention when needed. • Source N° 2 - Flood: A powerful LED with a very large reflector for ultra-wide and powerful lighting. - Maximum mode with an output of 170 lumens with an ultra-wide beam up to 14,5 metres. - Medium mode for clean and uniform close proximity lighting. - Fitted using an elasticated band, optional removable 20mm band over the top of the head. - Ease of battery changes thanks to the “Speed-Shift” concept. - Individual number. -E  xceptional water resistance: IPX7 (30 minutes of submersion under 1m of water)

Max

Medium

Medium

FLOOD

Double vision –both near and far- is achieved through the activation of both lenses – the Flood and Focus beam- by means of independent buttons. With 210 lumens in Total Power mode (by pressing 2 buttons), a throw up to 74m and weighing only 103g, the FF210 R is the ideal headlamp for the most challenging environments. This headlamp can be recharged with USB or can be used with normal batteries. - Rechargeable 1800 mAh Lithium-Ion battery using micro USB. - REFLECTIVE elasticated headband for additional visibility. Easily detachable, washable and compatible with the L24 fitted at the back. - Charge indicator light. - Minimum 300 charge cycles. - 3 AAA batteries (not included) fitted in a container (included) can be used to replace the rechargeable battery. - Micro USB cable included. - Battery gauge. - Individual number. - 103g weight.

Focus

Max

Eco

In the field performance: - For a 3h burn time : 210 lumen output. - For a 5h burn time : 170 lumen output. - For a 7h burn time : 76 lumen output. - For a 9h burn time : 45 lumen output.

Eco

FLOOD

Max

Max

Eco

Eco

Total POWER

Water resistance: IPX5

Max

• Source N° 1 - Focus: Powerful LED for focused long distance lighting when moving quickly. - Medium mode: 76 lumens with a focused beam up to 45m. - Maximum mode: 170 lumens with a focused beam up to 70m. - Economical mode for a maximum burn time. • Source N° 2 - Flood: Powerful LED with a large beam for broad, uniform lighting - Medium setting: 45 lumens for comfortable and uniform close proximity lighting without bright spots. - Economical setting: 5 lumens for ultra close proximity lighting with amaximum burn time. Total Power: combines source N°1 and N°2’s maximum settings for a 210 lumen output by pressing both buttons simultaneously.

FOCUS

FLOOD

Max -

Medium

Eco

LIGHTING

• Source N° 1 - Focus: A powerful LED with reflecting surround to provide a strong and long light beam. - Maximum mode: a very precise beam with a lighting distance up to 160 metres. - Medium mode: an excellent compromise between light level and energy consumption. - Economic mode: for maximum burn time. - Flashing mode to draw attention where needed. • Source N° 2 - Flood: 2 powerful lateral LEDs each backed by a reflector for bright and homogenous peripheral lighting. - Maximum mode with an output of 54 lumens for excellent peripheral vision. - Medium mode for clean and homogenous close proximity lighting. • Source N° 3: 2 red LEDs. - Constant mode for discreet night vision. - Flashing mode to draw attention or when in need. - Fitted using an elasticated band, optional removable 20mm band over the top of the head. - Ease of battery changes thanks to the “Speed-Shift” concept. - Individual number.

• Source N° 3: A constant red light setting for discrete lighting or efficient signalling in flashing mode.

62

63


LIGHTING

DISTRIBUTORS

Ref : BELT190.Y

LT 170

LT 190

An extremely compact lantern with 2 lighting functions – either torch or lantern.

A very stable lantern with 2 lighting functions – either torch or lantern. Wide and stable with an output of 190 lumens.

Torch position: - A powerful LED with additional reflector for a powerful and far reaching beam. - Maximum mode: 170 lumens and a focused lighting distance of up to 130 m. - Medium mode: for an excellent compromise between light output and energy consumption. - Economic mode: for maximum burn time. - Flashing mode: for efficient signalling when needed. Lantern position: - In this position a diffuser takes the place of the reflector and allows for 360° peripheral lighting. - This position equally provides maximum, medium and economic modes. - 3 retractable feet provide extra stability. - A hanging loop helps to suspends the lantern.

Torch position: - A powerful LED backed by a reflector for a bright and far reaching beam up to 150 m. Lantern position: - In this position a diffuser takes the place of the reflector and allows for powerful and homogenous 360° lighting. In the two positions you can choose your lighting mode from most economical to most powerful by a holding down the switch. - Two hooks helps to suspend the lantern.

ARGENTINA ANETO CUIT 30-71435017-6 NECOCHEA 1286 (1641) ACASSUSO BUENOS AIRES Tel/Fax : e-mail : aneto.argentina@gmail.com

CROATIA IGLU SPORT d.o.o Radnicka 1a, VB centar 10000 ZAGREB Tel : +385 1 3700434 Fax : +385 1 3777082 e-mail : iglusport@iglusport.hr Web : www.iglusport.hr

ASEAN Distribution Centre ALLSPORTS EQUIPMENT 52 UBI AVENUE 3 04-44 FRONTIER SINGAPORE 408867 Tel : +65 6848 9489 Fax : +65 6242 2312 e-mail : 0464@starhub.net.sg

CYPRUS LELLA KENTONIS INVESTMENT CO LTD 11B DORIEON STR STROVOLOS 2023 NICOSIA TEL +357-22-312262 FAX +357-22-499396 EMAIL : lkentoni@spidernet.com.cy

AUSTRALIA SEA TO SUMMIT PT Y LTD 6 – 8 Brown Street East Perth Western Australia 6004 Tel : +61 8 9221 6617 Fax : +61 8 9221 6618 e-mail : enquiries@seatosummit.com.au Web : www.seatosummit.com.au AUSTRIA HOHENARBEIT GmbH Kirchweg 17 A-5621 St. Veit Tel. 0043650/6363074 e-mail : bealpro@hoehenarbeit.net Web : www.hoehenarbeit.net BENELUX CJ AGENCIES BV Postbox 537 Hermesweg 28 NL -3741 GP Baarn Netherlands Tel : +31 35 5424200 Fax : +31 35 5415277 e-mail : info@cjagencies.nl Web : www.cjagencies.nl BRAZIL M. Arnaud & Cia Ltda - EPP Rua Alfredo Ortenzi, 125 - Bragança Paulista - SP Tel :(11) 4032-8688 Fax : (11) 4033-8687 e-mail : contato@m-arnaud.com.br Web : www.m-arnaud.com.br

- Water resistance: IPX4.

- Water resistance: IPX4.

BULGARIA PIK 3000 ltd Sofia 1504 rue Petra 7 Tel : +359 2 84 32 943 Fax : +359 2 94 33 664 e-mail : office@pik3000.com Web : www.pik3000.com CHILE JUST CLIMB - Soc. Ossher Ltda. Carlos XII 120 Loc. E LAS CONDES Santiago - Chile Tel : +56 2 22639499 Fax : +56 2 22639499 e-mail : justclimb@justclimb.cl Web : www.justclimb.cl

Flash light

Max

Flash light

lantern

Max

lantern

CHINA SNOWBIRD Forturn Garden,No.21,Baifuquan Road, Changping, Beijing,China(102200). Tel : +86 10 80118873 Fax: +86 10 80118994 Web : www.snowbird.com.cn COLOMBIA NOMADA CI Ltda Av. 1 de mayo 35 79 Bogotá D.C. Tel : 57 1 720 4027 - 57 1 202 2929 e-mail : info@nomadaoutdoor.com Web : www.nomadaoutdoor.com

Medium

Eco

Eco

CZECH REPUBLIC TOTALOUTDOOR S.R.O. Horni Rokytnice 470 51244 Rokytnice nad Jizerou +420 773 491 880 Email : info@beal.cz Web : www.beal.cz DENMARK SCANLICO DENMARK A/S Marielundvej 48A DK-2730 HERLEV Tel : +45 38 71 69 59 Fax : +45 38 71 69 53 e-mail : info@scanlico.dk ECUADOR NOMADA CI Ltda Av. 1 de mayo 35 79 Bogotá D.C. Tel : 57 1 720 4027 - 57 1 202 2929 e-mail : info@nomadaoutdoor.com Web : www.nomadaoutdoor.com FINLAND VANDERNET OY Pälkäneentie 14 FI-00510 HELSINKI Tel : +358 (0) 20 7418330 Fax : +358 (0) 20 7418346 e-mail : vandernet@vandernet.com Web : www.vandernet.com GERMANY KRAH GmbH Brauhausstrasse 19 D-82467 GARMISCHPARTENKIRCHEN ALLEMAGNE Tel : +49.88.21.93.23.0 Fax : +49.88.21.93.23.23 e-mail : info@krah.com Web : www.krah.com GREECE ACTIVE POINT SA 65 Athinon Ave. (bystreet) 1st floor 10447 ATHENS Tel : +30.210.9210906 Fax : +30.210.9220017 e-mail : actpoint@otenet.gr HONG KONG HONG KONG MOUNTAINEERING TRAINING CENTRE 102 prosperity building 61 tung choi street Mongkok Kowloon Hong Kong tel : 852 27706746 Fax : 852 27707110 e-mail : hkmtc@hkstar.com www.hkmtc.com

INDONESIA PT ALLSPORTS EQUIPMENT Cosa Building 1st Floor Jl. Tomang Raya no. 70 Jakarta Barat 11430 Indonesia Tel : +62 21 5698 0972 Fax : +62 21 5698 0973 e-mail : sales@allsports.co.id IRAN KOOH VEISI TRADING CO. No.86 Javad Kargar St. Bahar Shomali Ave. Zip Code: 15637-16518 Tehran / IRAN Tel : +9821 77533173 Fax : +9821 77520566 e-mail : info@koohveisi.com Web : www.koohveisi.com ITALY Commercial : Maqui di Fabrizio Vesco Email: maqui@outlook.it Tel: 334 7755330 Area Tecnica : X Work di Marco Vallesi Email : marco@xwork.it Tel: 335 5494766 Tel : +39 334 7755330 ICELAND STODTAEKI EHF. HVALEYRARBRAUT 35 220 HAFNARFIRDI Tel : +354 5109515 e-mail : hilmar@explorer.is JAPAN RESCUE PLANET, INC 1-73-1-103, Mihashi, Omiya-ku, Saitama -city, Saitama, 330-0855 TEL. (81)48-788-3602 FAX. (81)48-788-3603 e-mail : info@rescue-p.jp KOREA COREALPINE CO. LTD #505-14 KOLON ASTERN BLDG 2TH FL. 206-HO GASAN-DONG, GEUMCHEON-GU 153-708 SEOUL Tel : 82 2 2082 8450-3 Fax : 82 2 2082 8459 e-mail : annapurna@unitel.co.kr LATVIA SIA “CLIMB MORE” Rozu iela 8-21, Babite, Latvia, LV 2101 Tel : +371 29492660 e-mail : maris@virves.lv Web : www.virves.lv LEBANON SHOGUN OUTDOOR Armenia Str. Armenia Bldg Bourj-Hammoud BEIRUT Tel : +961 1 261039 Tel/Fax : +961 3 726676 e-mail : info@shogunoutdoor.com LITHUANIA UAB «LUKLA» Antakalnio st. 42-38 LT-10304 Vilnius Tel: +370 (610) 32 831 e-mail: info@lukla.lt Web: www.lukla.lt

MALAYSIA ALLSPORTS EQUIPMENT SDN BHD 1 Utama Shopping Centre Lot F226, 1st Floor Promenade 1 Lebuh Bandar Utama 47800 Petaling Jaya, Selangor Malaysia Tel : +60 (0)3 7728 0775 Fax : +60 (0)3 7728 0776 e-mail : alsportskl@yahoo.com MEXICO EL SEPTIMO GRADO Fernando Montes De Oca 61-2 Col Condesa, CP 06140 MEXICO DF MEXICO Tel : +52 55 55 53 27 27 Fax : + 52 55 55 53 37 77 e-mail : septimogrado@prodigy.net.mx Web : www.elseptimogrado.com NEPAL PEAK PROMOTION TRADING Pvt. Ltd. P. O. Box : 5237, Thamel, Kathmandu, Nepal Tel : 977-1-4 249454 Fax : 977-1-4 245137 e-mail : peakgear@mos.com.np NEW ZEALAND SOUTHERN APPROACH 372 Cashel Street CHRIST CHURCH Tel : +64 3 3899760 Fax : +64 3 3897640 e-mail : service@southernapproach.co.nz NORWAY VARRI AS Hasleveien 15E 0571 Oslo Tel : 22719200 Faks : 22719201 e-mail : post@varri.no Web : www.varri.no PERU NOMADA CI Ltda Av. 1 de mayo 35 79 Bogotá D.C. Tel : 57 1 720 4027 - 57 1 202 2929 e-mail : info@nomadaoutdoor.com Web : www.nomadaoutdoor.com POLAND PRZEDSIEBIORSTWO HANDLOWO-USLUGOWE AMC. Spolka Jawna Mników 389 32-084 MORAWICA Tel : +48 12 656 70 88 Fax : +48 12 656 70 89 e-mail : info@amc.krakow.pl Web : www.amc.krakow.pl PORTUGAL SUBMATE LDA . R. Cor. Bento Roma, Lote 920 Loja Esqa 1700-122 Lisboa Tel : +351 21847 12 69 Fax : +351 218403729 e-mail : info@submate.pt REPUBLIC OF MACEDONIA VERTIKAL SPORT Ul. Rajko Zinzifov, 40 1000 SKOPJE Tel : +389.2.3231.802 Fax : +3892.3231802 e-mail : shara@mt.net.mk Web : www.vertikalsport.com.mk

ROMANIA SPELEMAT str. Primariei nr. 9, 410209 ORADEA Tel : +40259 431069; +40359 410557 Fax : +40259 431069 e-mail : contact@spelemat.ro Web : www.spelemat.ro RUSSIA VERTICAL SPORT SHARI KOPODSHIPNI KOVS KAYA STR 7-2 115088 MOSCOW Tel/Fax : +7.495.674.2344 e-mail : info@verticalsport.ru SERBIA & MONTENEGRO IGLU SPORT d.o.o. Ustanicka 189 11050 Belgrade 22 Serbia Tel : +381 11 3470618 Fax : +381 11 3471677 e-mail : info@iglusport.rs Web : www.iglusport.rs SLOVAKIA TOTAL OUTDOOR s.r.o. Horni Rokytnice 470 51244 Rokytnice nad Jizerou CZECH REPUBLIC +420 773 491 880 e-mail : info@beal.cz Web : www.beal.cz SLOVENIA IGLU SPORT D.O.O Litostrojska 40 1000 Ljubljana Tel : + 386 (1) 24 12 760 Fax : + 386 (1) 24 12 757 e-mail : iglu@iglusport.si Web : www.iglusport.si SOUTH AFRICA RAM MOUNTAINEERING Unit 7 Old Mill Park 22 Old Mill Way, Ndebeni CAPE TOWN Tel : +27 21 532 0549 Fax : +27 21 531 2844 e-mail : info@rammountain.co.za Web : www.rammountain.co.za SPAIN Vertical Sports S.L. C/ Pere IV , 29-35, 3-1 08018 Barcelona Tel : +34.93.309.10.91 Fax : +34.93.485.09.49 e-mail : info@vertical.es Web : www.vertical.es SWEDEN C2 VERTICAL SAFETY AB BOR JEGATAN 78 SE-752 29 UPPSALA Tel : +46-(0)18-67 79 90 Fax : +46-(0)18-14 01 90 e-mail : info@c2safety.com Web : www.c2safety.com SWITZERLAND CASOAR SA Route du Verney 20 1070 Puidoux Switzerland Tel : +41 (0)21 925 20 80 Fax : +41 (0)21 925 20 89 e-mail : info@casoar.com Web : www.casoar.com

THAILAND ROCKCAMP INTERNATIONAL CO.,LTD. 50 Phuttamonton Sai 1 Road, Chimplee, Talingchan BANGKOK 10170 Tel : +662 887 9946 Fax: +662 887 9947 e-mail : rockcamp@thaiclimbing.com www.Thaiclimbing.com TAIWAN BAE YUEH MOUNTAIN AND SPORTS LTD No.456, Mincyuan 2nd Rd., Cianjhen Dist., Kaohsiung City 80654, Taiwan TEL:+886-7-3308399 FAX:+886-7-3326931 email:service@100mountain.com TURKEY MEYDAN AV MALZEMELERI SAN & TI C LTD STI . Kemeralti Cad. Sefkat Ishani Kat:1-2 No:1-3 Karakoy 34425 ISTANBUL Tel : +90 212 292 50 16 e-mail : meydan@meydanav.com Web : www.meydanav.com www.meydankamp.com UKRAIN EXTREME CENTRE Maryanenko 3 61057 KHARKIV Tel : + 38 0572 588361 Fax : + 38 0572 588362 e-mail : info@extreme-centre.com Web : www.extreme-centre.com UNITED KINGDOM AND IRELAND LYON EQUIPMENT LTD Unit 3-7 Tebay Business Park Old Tebay Penrith CA10 3SS Tel : + 015396 24040 Fax : + 015396 26330 e-mail : info@lyon.co.uk Web : www.lyon.co.uk URUGUAY VERANEX S.A. ZONA FRANCA LIBERTAD Manzana A, Predio A9 Ruta 1 Km 49 San José URUGUA Y Tel : (0054) 11 47170284 Fax : (0054) 11 47921935 e-mail : info@veranex.com Web : www.veranex.com USA LIBERTY MOUNTAIN 9816 S. Jordan Gateway (500 West) SANDY UT 84070 Tel : 0801 954 0741 Fax : 0801 954 0766 e-mail : salesstaff@libertymountain.com Web : www.libertymountain.com VIET NAM Vina Access 18-20 Truc Duong, Thao Dien, district 2, Ho Chi Minh City Tel: (+84.8) 62819248 e-mail: info@vina-access.com VietClimb 40 ngo 76 An Duong, Ho Tay district, Ha Noi Tel: (+84.4) 66824352 e-mail: info@vietclimb.vn

HUNGARY GREEN SERPENTINE KFT. 9400 Sopron Szellö u. 9. Hungary Tel: +36 99 523 294 Fax: +36 99 523 295

BEAL PRO

ÉCLAIRAGE

Ref : BELT170.G

2, rue Rabelais - 38200 Vienne - FRANCE Tel : +33 (0)4 74 78 88 88 - Fax : +33 (0)4 74 85 27 76 commercial@beal-planet.com

www.beal-pro.com

64

65


BEAL PRO

2, rue Rabelais - 38200 Vienne - FRANCE Tel : +33 (0)4 74 78 88 88 - Fax : +33 (0)4 74 85 27 76 commercial@beal-planet.com

www.beal-pro.com Images for illustrative purposes only. Final specification may be subject to change. Copyrights: ©cyril crespeau / crespeauphoto.fr - ©Shutterstock - ©vuedici.org - ©Maxime GUIGUE - ©Madmax Studio Photos Produits: ©Cyril Crespeau / crespeauphoto.fr Création & Réalisation: www.lenaturographe.fr

Beal Pro 2017  
Beal Pro 2017  
Advertisement