Plates & Coils - Jindal Steel & Power Ltd

About Jindal Steel & Power Ltd Jindal Steel and Power Limited (JSPL) is one of India's primary & integrated steel producers with a significant presence in sectors like Mining, Power Generation and Infrastructure.

With an annual turnover of over US$ 3.5 billion, JSPL is a part of the US$ 18 billion diversified O. P. Jindal Group and is consistently tapping new opportunities by increasing production capacity, diversifying investments, and leveraging its core capabilities to venture into new businesses. The company has committed investments exceeding US$ 30 billion in the future and has several business initiatives running simultaneously across continents.

From the widest flat products to a whole range of long products, JSPL has a product portfolio that caters to the varied needs in the steel market. The company also has the distinction of producing the world's longest 121 meter rails and large size parallel flange beams for the first time in India.

JSPL operates the largest coal-based sponge iron plant in the world and has an installed capacity of 3 MTPA of crude steel at Raigarh, Chhattisgarh.

The company has an installed capacity of 타

0.8 MTPA Rail and Universal Beam Mill at Raigarh, Chhattisgarh

타

0.6 MTPA Wire Rod Mill and 1.0 MTPA TMT Rebar mill at Patratu, Jharkhand

타

0.6MTPA Medium and Light Structural Mill and 1.0 MTPA Plate Mill at Raigarh, Chhattisgarh and

타

1.5 MTPA Plate Mill producing up to 5 meter wide plates at Angul, Odisha

The company aims for a fast-paced growth so as to contribute substantially to India's long term prosperity.

An enterprising spirit and the ability to discern future trends have been the driving force behind the company's remarkable growth story. The company has scaled new heights with the combined force of innovation, adaptation of new technologies and the collective skills of its 15,000 strong, committed workforce.

Plate Mill in Angul, Odisha

2

3

5 Meter Ultra Wide Angul Plate Mill

The newly commissioned plate mill from Siemens VAI, at Angul, Odisha produces plates up to a width of 5 meter. It is equipped with latest equipments and technologies like TMCR, MULPIC cooling, On-line & Off-line normalizing, Quenching, Tempering, Shearing Units & On-line ultrasonic flaw detection system.

The Angul Plate Mill features the world class processes and ultra-modern facilities like: • • • • • • • • •

4

A state-of-the-art plate mill with total production capacity of 1.5MTPA with steel refining and rolling processes as exclusive to this mill Hydraulic Automatic Gauge Control, Continuous Variable Crown, Anti Bending System, Plan View Rolling & Online Gamma Thickness Gauge Electric Arc Furnace, Ladle Refining Furnace, Vacuum Degassing 300mm Vertical Caster with Soft reduction in Six segments followed by Pile cooling 4Hi Reversible Powerful Mill with 10,000 tonnes of roll separating force MULPIC (Accelerated cooling and Direct Quenching) 100% Full body and Edges, Online Ultrasonic testing Furnace Normalized, Austenitized, Quenched & Tempered, Thermo Mechanical Control Processed Widest dimensional range

Angul Plate Mill’s Major Offerings

JSPL adheres to stringent international standards and the steel grades are manufactured under various specifications like IS, ASTM, EN, JIS, API etc. The Angul Plate Mill is fully equipped with inspection facilities right from the steel making stage to finished plate stage.

It is also equipped with the walking beam type reheating furnace which ensures excellent surface quality and high pressure de-scaler. The slabs in this furnace are re-heated to a temperature ranging from 1100-1250°C based on grades and then rolled in a 4 Hi-reversing Mill to produce plates with excellent surface quality.

The Angul mill is also equipped with Level 2 Automation; Thickness and Width controlling system coupled with Heavy duty Leveller which assures close dimensional tolerances and an increased level of flatness control during plate production.

Our Plate Mill is capable of producing value added grades and products meeting all specialized and latest industry requirements.

CONTINUOUS CASTER SLAB

FINISH PLATE

Thickness - 150 mm - 300 mm

Thickness - 5 mm - 150 mm

Width - 1000 mm - 2300 mm

Width - 900 mm - 5000 mm

Length - 2600 mm - 4800 mm

Length - 3000 mm - 24000 mm

Weight - 4.6 - 30 MT (Max.)

Weight - 30 MT (Max.)

5

What makes our Angul Plate Mill Unique

Why JSPL Plates are Better than Others

Features • • • • • • • •

Scale Free Heat Treated Plates Online Direct Quenched Plates Ultrasonic Testing Machine online top down 102 probes Residual Stress Free Plates Customized Plates: Grades, Thickness, Width, Length Ultra Wide 5000mm Plates ½ ASTM Tolerances Metallurgical Process: DRI, EAF, LF, Vacuum Degassing, Vertical mould continuous Caster with Soft Reduction, Plate Rolling, Heat Treatment • TMCP, MULPIC (ACC/DQ) • Product and Strength Range: Thickness-5-150mm, Width- 900-5000mm Length- 3000-24000mm, YS-235-1800 Mpa • Advanced OCTOPUS testing software

Technology Used • • • • • • •

5 Meter Wide Plate Mill : M/s Siemens VAI UK 280 MT/Hr. Reheating Furnace: M/s Fives Stein France Roll Shop: M/s TENOVA Pomini Italy Online Ultrasonic Testing M/c : M/s G E Inspection Technologies Germany Detailed Engineering for Civil , Structural & Infrastructure by: M/s MECON India Robotic Universal Testing M/c- M/s Zwick Roell, Germany Impact Testing M/c & Hardness Testers: M/s Zwick Roell, Germany

Capacity • • • • •

Phase I - 1.5 Million Tonnes per annum Phase II - 2.0 Million Tonnes per annum Width of Plate to be Rolled - 900mm to 5000mm Maximum despatchable length - 24 Meters Thickness of plate - 5 mm to 150mm

Wide Dimensional Range Plate Thickness from 5mm to 150mm, Width 900-5000mm & Length 3000-24000mm

Quality Assurance From the raw material to the final product delivered to the customers, JSPL assures consistent quality at every step. Its strong quality assurance and control systems are equipped with state-of-the-art modern testing facilities and conform to stringent quality standards. Ultra clean steel owing to in-house iron ore, coal mines, better grain orientation and strength/ structural integrity for plates & sheets on account of cross rolling.

Wide Application High end special steel grade plates such as High Strength Low Alloy (HSLA), Boiler & Pressure Vessel and API, are used in all structures, Boilers , Line Pipes, Automobiles, Ship Building, Wind Mills, Yellow Goods, Wagon Manufacturing, Defense & other Engineering applications.

Leading Technology

Benefits

• Automatic gauge control

Accurate dimensions

• Work roll bending and Shifting equipment

Increases profile and flatness control range

• Smart crown facility

Better flatness Proper cross section and shape to ensure plate rectangularity

• Plan view rolling • Profile and flatness gauges

Ensuring premium quality in plates

• Thermo-mechanical controlled rolling & MULPIC (Multi purpose interrupted cooling) process

For producing high-tensile steel plates with high and good weldability for all major structural applications.

• Double side trim shear

For trimming plates with tighter tolerances

• Slitting shear

Center slitting

• Dividing shear sampling & cut to length

Sampling & cut to length plates

• Heat treatment facility

For normalizing, austenitising, quenching and tempering Automatic inspection and evaluation of the full body of the plates

• On-line Ultrasonic flaw detection system

Compliance with Standards/ Customer Requirements With Strict adherence to various national and International standards/ specifications like EN, DNV, BS, ASTM, API,JIS, LRS, ABS, IS etc; JSPL Plate Mill is capable of producing value added plate products to meet critical and the latest industry requirements.

6

7

Process Flow

DRI

Slabs Yard

High Pressure Descaling

Walking Beam Reheating Furnace

Cooling Bed 1 (Thickness<= 50 mm)

Inspection Bed (Plate Turnover Device)

Vaccum Degassing/ RH Degassing

Ladle Refining Furnace

Electric Arc Furnace

Online Ultrasonic Testing

4 Hi Reversing Mill

Double side trim shear & Slitting Shear

MULPIC

Paint Marking & Stamping

Divide shear

Slab Casting

Hot Leveller

Packing & Dispatch

Sampling & Testing Hot Paint Marker

Cooling Bed 3 (Thickness >50 mm)

Trolley Mounted UT Machine

Gas Cutting

Paint Marking & Stamping

Packing & Dispatch

*Offline Heat treatment Facilities available- Normalising, Quenching & Tempering

8

9

Process Flow of Angul Plate Mill

Digital Reheating Furnace

Shearing Units

The double row walking beam type digital furnace with a capacity of 280MT/hr is equipped with side burners having an independent on/off control for each burner, reducing the excess scale formation. The furnace is split into different control zones for uniform heat transfer through homogeneous heat & elimination of hot spots. The world's longest furnace 57 meter provided by Fives Stein further enhances soaking & improves the quality of heavy plates.

The online shearing units in the mill can shear plates of up to 50 mm thickness. The mill is equipped with heavy duty shear for plate shearing. With the help of double side trim shear, plates are supplied in trimmed and ready-to-use condition with tighter tolerance. Slitting shear on the other hand is used for central slitting where as dividing shear helps in sampling and final cut to length of plates.

Rolling Mill The 4 Hi reversible rolling mill along with cross rolling facilities has a roll separating force of 10,000 tonnes. This force helps in high shape factor rolling and thus reduces the internal discontinuities. The rolling mill is supported by high speed automatic gauge control, work roll anti bending and shifting equipment, smart crown facility, plan view rolling, profile & flatness gauges.

Thermo-Mechanical Controlled Rolling and Accelerated Cooling The thermo mechanical control process is a new generation rolling process for producing fine grain steel by rolling the steel plates in re-crystallization and non recrystallization region of austenite and for some applications in the dual phase region of austenite & ferrite and then using high rate (accelerated) cooling. Apart from the latest rolling, the mill also has Multi Purpose Interrupted Cooling (MULPIC) with features of Accelerated Cooling, Direct Quenching (DQ) & Quenching with Self Tempering (QST) facilities. A wide range of alloy design can be adapted for devising the rolling & cooling processes for achieving the desired properties. The combination of controlled rolling and accelerated cooling helps in producing high tensile steel plates with lower carbon equivalent with targeted properties, microstructures and excellent surface finish.

Hot Leveller The hot leveller, with a capacity of 4,000 tonnes, provides excellent flatness and residual stress-free plates. Residual stress free plates are achieved by performing bending reversals, wherein, the plates are passed through a number of rolls separated by distance. The levelling force and the roll gap setting through hydraulic gauge control are calculated based on the strength, thickness, temperature etc. A plastification ratio of up to 80% can be offered depending on the tensile strength and thickness. The unit has automatic gauge control and shape system to ensure a high level of flatness. Residual stress free plates can be produced with most powerful leveller with a capacity of levelling heavy plates up to 100mm thickness.

10

Ultrasonic Testing The ultrasonic testing unit is on-line test equipment supplied by GE for automatic inspection and evaluation of the full body of the plates. The 102 probes ensure accurate examination of all flaws. As a result, on-line inspection of up to 50 mm covering 100% of the plate body and edges is done. Indications are recorded and evaluated to ensure precise monitoring of the internal quality of plates. The accuracy of this machine is such that a flat bottom hole of 2 mm diameter can be detected which supersedes any international standards so far in the Ultrasonic flaw detection. For thickness beyond 50mm, Ultrasonic testing shall be performed through trolley mounted multiprobe testing machine.

Heat Treatment The mill is equipped with heat treatment facility with normalizing, austenising, quenching and tempering furnaces for achieving the desired texture of the steel plates. The plates are shot blasted before heat treatment and an inert atmosphere is maintained in the furnaces with indirect radiant type heating ensuring no scale formation on the surface of the plate.

Marking and Traceability Equipped with Hot paint marker, Cold paint marking & Stamper in impact unique and permanent identification. This ensures traceability right from the heat making stage to the finished product.

11

Metallurgy of Plate Rolling The plate mill is a metallurgical tool that enables us to produce wide range of high quality plate products using different rolling techniques & heat treatment processes. Depending on the application, rolling techniques like As-Rolled, Normalized Rolled, Thermo-Mechanical Controlled process are adopted. These plates can further be processed in heat treatment (Normalizing and Quenching & Tempering) for improving the mechanical properties suiting the applications.

Figure 1 shows the metallurgical principles followed for producing different range of plate products.

As Rolled As rolled is a rolling procedure in which the final deformation is carried out in the austenitic region. General grades of steel plates are processed using this technique. With the advent of high powered mills, even the as rolled products offer good properties.

Normalized Rolled Normalized rolling is a rolling procedure in which the final deformation is carried out above the Ar3, i.e, in the austenitic region equivalent to the normalizing temperature range. Normalized Rolled plate products are used as a substitute for Furnace Normalized steel plates. The normalized rolled products offer similar properties that of furnace normalized plates with improved mechanical properties like ductility, impact toughness etc. The mechanical properties are further retained even after normalizing of these plates.

Thermo-Mechanical Control Process Thermo mechanical control process(TMCP) is a new generation rolling process for producing fine grain steel by rolling the steel plates in recrystallization and non-recrystallization region of austenite and for some applications in the dual phase region of austenite & ferrite and then using high rate (accelerated) cooling. A wide range of TMCP plates can be processed by controlling the rolling and the cooling strategies like air cooling & accelerated cooling. The steel slabs are first homogenized in the reheating furnace for dissolution of micro-alloys and to form a homogenized coarse austenite with a defined drop out temperature.

The rolling is split into two phases, one in the recrystallized austenite and another in the non-recrystallized austenite. In between the two phases the intermediate plate stock is allowed to oscillate in the roller table prior to achieving the recrystallization stop temperature. The final deformation & rolling sequences are given in the non-recrystallized phase for achieving favorable properties. The thermo-mechanical rolling is followed with accelerated cooling or air cooling depending on the service property requirements. TMCP plate helps in achieving high strength, high toughness with lower carbon equivalent.

Thermo-Mechanical Controlled Rolling with Direct Quenching & Self Tempering A combination of thermo-mechanical controlled rolling and a very high rate of cooling is known as direct quenching.

Direct quenching is an online cooling technique (MULPIC) that helps in achieving very high cooling rates to substitute quenched and tempered steel plates.

Depending on critical applications, the unit also has advanced mathematical models for performing quenching as well as self tempering. The self tempering helps in improving ductility and impact toughness.

Furnace Normalized Furnace Normalizing is a heat treatment procedure adopted to improve the mechanical properties of rolled steel plates.

The principle of furnace normalizing is heating the steel plates above Ar3 temperature (Approx 910°C), soaking at that temperature and then allowing it to cool in still air. This process helps in reducing the internal stresses, the microstructural banding, and further helps in refining the grains to produce fine grains and homogeneous microstructures. The normalized plates offer improved ductility, fine grained microstructures, and excellent impact toughness. The process is carried out in a closed roller hearth furnace with advanced temperature controls for thinner plates and in bogie-hearth furnace for thicker plates.

Quenching (Hardening) and Tempering Quenching is a heat treatment process of heating the steel plates above Ar3 (Approx 910°C), soaking for a stipulated duration at a very high rate of cooling. The quenched steel plates are very hard, low on ductility & toughness. The steel plates are further heat treated in a furnace in a wide range of temperature viz. 150°C to 700°C to produce steel plates with desired properties. The tempering is done to improve the ductility, impact toughness and achieving desired hardness.

Thermo-Mechanical Rolling

Process A

C

B

D

F

E

G

Temperature

Hot Rolling

grec

g(coarse)

g(fine) recrystallised

g(fine) formed

α

MLE

gnot rec

Ac₃

Heating

TN Water

Air

Grain refinement

Ar₃

TEMPERATURE

ACC

a+g Ar₁

a

“as rolled” (“AR”)

MS

+ N

TM

+ Q&T

(g)

TM

(g+a)

TM

TM+ ACC

TM+ DQ ,QST

Final rolling

Cooling on air

Accelerated cooling

Tempering

“TM(CP)”

TIME

Time

Figure 1 Rolling and Heat Treatment Process

12

Figure 2 Thermo - Mechanical Control Process

13

Construction / General Engineering

JSPL manufactures plates for bridges, dams, civil structures and for industrial fabrication work

Mechanical Properties • • • •

High strength and toughness Good weldability Corrosion and fatigue resistance Tight dimensional tolerances

Grades Ÿ IS 2062 E250 to E450 Ÿ EN 10025 S235 to S450 Ÿ ASTM A36, A283/285, A588 Ÿ With Strict adherence to various national and International standards/

specification like IS, EN, DNV, BS, ASTM, JIS, LRS, ABS etc, JSPL Plate Mill is capable to produce value added plate products to meet specialized and latest industrial requirements

Dimensions Ÿ Plates Thickness: 5 mm - 150 mm Ÿ Width : 900 mm - 5000 mm

Applications

Ÿ Length : 3000 mm - 24000 mm Ÿ Max. weight: 30 MT per plate

JSPL Heavy Plates are finding wide application across verticals due to its

*Dimensional Tolerances as per relevant standards / customized specification

ultra wide range and grades produced using state-of-the-art technology.

Delivery Conditions Ÿ As rolled Ÿ Normalised rolled Ÿ Thermo mechanically controlled process Ÿ Quenched and Tempered

18

19

Ship Building

JSPL manufactures hot rolled plates and coils for the ship building industry which can endure adverse loading conditions, face corrosive environment and low temperature conditions to give the required mechanical properties of • High strength • Low temperature toughness • High corrosion resistance • Excellent fatigue properties • Tight dimensional tolerances • Excellent weldability with Low carbon equivalent

Dimensions Ÿ Thickness: 5 mm - 90 mm Ÿ Width: 900 mm - 5000 mm Ÿ Length: 3000 mm - 24000 mm Ÿ Max. Weight: 30 MT per plate

*Dimensional Tolerances as per relevant standards / customized specification

Delivery Conditions Ÿ As rolled Ÿ Normalised rolled

Wind Mill

Wind Mill JSPL manufactures plates for windmills subjected to high wind speeds and buckling loads due to blades rotation

Mechanical Properties • • • • •

High strength and toughness Good weldability, formability Corrosion and fatigue resistance Weld bead bend test on demand Through thickness properties.

Applications • Tower • Supporting structure for generator

Grades EN 10025 S355 JR/JO/J2/K2, EN 10025 460 NL/ML, EN 10025 690 QL

Dimensions

Ÿ Thermo mechanically controlled rolled

Ÿ Thickness: 5 mm - 80 mm

Ÿ Furnace Normalised

Ÿ Width: 900 mm - 5000 mm

Ÿ Quenched and Tempered

Ÿ Length: 6000 mm - 24000 mm

Ÿ Reference Standards: ASTM, IRS, ABS, DNV, GL, NKK, LR,BV etc.

Ÿ Weight: 30 MT per plate

*Dimensional Tolerances as per relevant standards

Delivery Conditions Ÿ As rolled Ÿ Normalised Ÿ Thermo-mechanically controlled Ÿ Quenched and Tempered

20

21

Testings Lab

Line Pipes and Offshore Platforms

Inspection & Testing Facility

JSPL manufactures hot rolled plates as per International standards especially API grade steel for making line pipes for transportation of oil, gas and for offshore applications.

JSPL assures its customers of superior quality plates. Rigorous quality assurance plan and state-of-the-art testing facility ensures compliance to all national and international specifications.

Mechanical Properties • • • • •

High strength and toughness Low temperature toughness Corrosion and fatigue resistance Wear and abrasion resistance Tight dimensional tolerances

Our Laboratory and Testing Facilities are equipped with: • Robotic Universal Testing Machine 1200kN • Automatic Impact Testing Machine 750J • 1000kN Capacity Bend Testing Machine • Drop Weight Tear Testing (DWTT-100,000J capacity) • Multi Probe UT Scanning Device • Metallurgical Microscope & Image Analyser • HIC/NACE Testing Facilities • Simulation Furnace • Vicker and Rockwell Hardness Testing Machine • Spectrometer • Through Thickness Testing (Z-Test) • Weld Bead Bend Test

Applications Ÿ Offshore Structures Ÿ Oil and Gas Line Pipes

Grades Ÿ API 5L Grade B, API 5L X-42/X-46/X-52/X-56/X-60/X-65/X-70/X-80 Ÿ EN10225 S355+N, EN10225S355+M, EN10225S3420+M, EN10225S460+M Ÿ API 2H-50Z, API 2W-50Z, API 2W-60

Dimensions Ÿ Ÿ Ÿ Ÿ

Thickness : 5 mm - 100 mm Width : 1500 mm - 5000 mm Length : 3000 mm - 24000 mm Max. weight : 30 MT per plate

Mechanical testing such as Tensile test, Impact test, Bend test,Hardness test, Chemical analysis, Microstructure examination/Grain Size determination are done in accordance with the standard specifications as per order. JSPL produces steel plates under proper metallurgical quality control and product inspection at each stage.

*Dimensional Tolerances as per relevant standards / customized Impact tested & Stringent UT as per requirements

Delivery Conditions Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ

22

Thermo mechanically controlled process Normalised Quenched and Tempered Through thickness test (Z - Test) Drop weight tear test (DWTT) and CTOD test Impact tested & Stringent UT as per requirements

14

Plate-cum-Coil Mill at Raigarh

Our Plate- cum-Coil Mill at Raigarh (Chattisgarh) produces plates up to 3500mm wide and coils upto 2500 mm wide in various steel grades as per Indian and International standards. JSPL Plates & Coils are of premium quality in terms of dimensional adherence & internal soundness owing to its clean raw material, sound steel refining facilities and an efficient rolling mill. JSPL produces plates and coils complying to IS 2062 specifications upto E450 grades besides a wide range of international standards and steel grades as per EN, DIN, JIS, ASTM, API etc. The mill is approved by various certifying agencies such as LRS, DNV, ABS, GL, BV, IRS and NKK for shipbuilding steel; AD2000,PED, LR and IBR for boiler quality and CE marking for export. Beside these this mill is also accredited with : ISO 9001:2008, ISO 14001:2004 , OHSAS 18001and NABL certification for chemical and mechanical lab.

Product Dimensions DISCRETE PLATES

HOT ROLLED COILS

Thickness: 5 mm - 120 mm

Thickness: 5 mm-25 mm

Width: 1500 mm - 3500 mm

Width: 1500 mm-2500 mm

Length: 3000 mm - 13500mm

Coil ID/OD: 700 mm/2000 mm

Weight: 24 MT (Max.)

Coil Weight: 25 MT (Max.)

FURNACE NORMALISED/ ONLINE NORMALISED PLATES

CUT TO LENGTH PLATES

Thickness: 5 to 80 mm

Thickness: 5 mm-25 mm Width: 1500 mm-2500 mm Length: 6000 mm-12500 mm

Grades Family of grades produced • • • • • • •

Low strength plain carbon, standard structural and boiler steel High strength plain carbon, solution hardened steel Precipitation hardened HSLA steel Control-rolled “Line Pipe” grade steel Corrosion/Heat resistant steel Low alloy steel Cu bearing grades

Plate-cum-Coil Mill at Raigarh

16

17

Contact Details

Certifications

KEY LOCATIONS & SALES NETWORK Corporate Office Jindal Centre, 12, Bhikaiji Cama Place, New Delhi - 110 066, INDIA Tel: +91 11 26188340-50 Fax: +91 11 26161271

Registered Office O.P. Jindal Marg Hisar - 125 005, Haryana, INDIA Tel: +91 1662 222471-84 Fax: +91 1662 220476

Works Barbil Iron Ore Pellet Plant Commercial Office,Plot No. 507/365, Barbil-Joda Highway, Barbil - 758035, Odisha, INDIA Tel: +91 6767 248621/248625 Fax: +91 6767 248620

Dumka Indra Palace, Nag Path, Shiv Pahar, Dumka - 814 101, Jharkhand, INDIA Tel: +91 6434 231045 Fax: +91 6434 231044

Patratu Balkudra, Patratu, Distt. Ramgarh, Jharkhand - 829 143, INDIA Tel: +91 6553 275724/275726 Fax: +91 6553 275744

Raipur 13 K. M. Stone, G.E. Road, Mandir Hasaud, Raipur - 492 101, Chhattisgarh, INDIA Tel: +91 771 2471205-07 Fax: +91 771 2471214, 2471120 E-mail: jspl_raipur@rpr.jspl.com

Head Office/International Sales Division Jindal Steel & Power Limited Plot No-2, Sector-32, Near Exit-10, Gurgaon - 122 001, Haryana, INDIA Tel: +91 124 6612000 (Board) Fax: +91 124 6616202 E-mail: marketing@jindalsteel.com

Bhubaneshwar Jindal Steel & Power Limited Flat No. 204/205, Plot No. 428/1869 Basudev Enclave, Near Swaranapuri, Bhubaneswar - 751 029 Tel: +91 674 2726500 Fax: +91 674 2726889 E-mail: omprakash.behera@bbsr.jspl.com

Hyderabad Jindal Steel & Power Limited Suite No. 102, 1st Floor Cyber Heights, Banjara Hills, Road No. 2, Hyderabad - 500 034 Tel: +91 40 40024878 E-mail: vadankumar@jspl.com

Kanpur Jindal Steel & Power Limited Sai Square (3rd Floor) 45, Bhargava Estate, Civil Lines, Kanpur - 208 001 Mob: +91 9971667034 Email: rajiv.mishra@jindalsteel.com

Mumbai Jindal Enclave, 1st Floor, Behind Marathe Udyog Bhawan New Prabhadevi Road, Prabhadevi Mumbai - 400 025 Tel: +91 22 66241000, 66241031 Fax: +91 22 66241020 e-mail: subrat.panda@jspl.com

Ahmedabad Jindal Steel & Power Limited 1208, MATRIX, Behind Divya Bhaskar Office, SG Road, Prahladnagar, Satellite, Ahmedabad - 380 051 Tel: +91 79 65255502/3 E-mail: subimal.sarmah@jspl.com

Chennai Jindal Steel & Power Limited A Block, 6B, 6th Floor, Meena-Kampala Arcade, Old No. 113 & 114, New No. 20 & 18, Sir Theyagaraya Road, T. Nagar, Chennai - 600 017 Tel: 044 443446950-61, 24323530 Fax: +91 44 42132334 E-mail: jsplchennai@airtelmail.in

Jaipur Jindal Steel & Power Limited 501 &504, Pashupati Akshat Heights Bani Park, Jaipur - 302 016 Mob: +91 9694085333 E-mail: siddarth.lodha@jindalsteel.com

Kochi Jindal Steel & Power Limited 32/1577 - C2 (2nd Floor) Springs Cascade, Opp. Ernakulam Medical Centre, Bye Pass Road, Palarivattom, Kochi - 682 025 Tel: +91 484 4019808 Mob: +91 9567761233 E-mail: anurag.rai@jindalsteel.com

Angul Jindal Steel & Power Ltd. Chhendipada Road, SH-63, At\Po : Jindal Nagar, Pin-759111 Dist : Angul (ODISHA) Tel: +91 6761 254191-95 Fax: +91 6761 254141-144 Email: jindalangul@angul.jspl.com

ISO 9001:2008

ISO 18001

ISO 14001:2004

ABS Certification

Raigarh Kharsia Road,Raigarh - 496 001, Chhattisgarh, INDIA Tel: +91 7762 227001-05 Fax: +91 7762 227022-23 E-mail: raigarh@jspl.com

Marketing Offices

LR Certification

DNV Certification

GL Certification

NKK Certification

Bengaluru Jindal Steel & Power Limited N-306, IIIrd Floor, Manipal Centre, 47, Dickenson Road, Bengaluru - 560 042 Tel: +91 80 42127132 E-mail: ajoy.gupta@jspl.com Bhopal Jindal Steel & Power Limited FM-5A, 1st Floor, Block - A, Mansarover Complex, Hoshangabad Road, Bhopal - 462 011 Tel: +91 755 4061630 E-mail: deepak.srivastava@jindalsteel.com

Chandigarh Jindal Steel & Power Limited SCO- 24, Sector 26, Madhya Marg, Chandigarh-160 019 Mob: +91 8427822311 Email: anand.prakash@jspl.com

Jamshedpur Jindal Steel & Power Limited Flat No. A1/1, Niroda Apartment, ‘L’ Road, P.O. Bistupur, Jamshedpur - 831 002 Mob: +91 9934010544 E-mail: amar.gaunjhu@pat.jspl.com

Kolkata Jindal Steel & Power Limited Room No. 61 & 63, 6th Floor, Circular Court, 8 A.J.C. Bose Road, Kolkata - 700 017, Tel: +91 33 - 40218100-20 Fax: +91 33 - 40218116 Mob: +91 9163878190 E-mail: kaushikb@jspl.com

Raipur Jindal Steel & Power Limited 13 K.M. Stone G.E. Road, Mandir Hasaud Raipur - 492 101 Chhattisgarh, INDIA Tel: +91 771 2471205-7 Fax: +91 771 3054671/2471001 E-mail: sbnag@rpr.jspl.com Visakhapatnam Jindal Steel & Power Ltd 2nd Floor, Pavan Commercial Complex, (Above Syndicate Bank) Main Road, Daba Gardens, Visakhapatnam-530020 Andhra Pradesh

Stockyards

PGCIL Approval

RDSO Approval

CE Marking

Well known steel maker

Ahmedabad M/s Raghav Steel 156/157, Mouje Eyava, Near Hipolin Ltd., Sanand Viramgam Highway Sanand, Ahmedabad - 382 110, INDIA Mob: +91 9909964648 E-mail: hardiks@jspl.com

Cuttack M/s Baba Lingaraj Enterprises At Govindpur Chak PO: Baichuna, Tangi, Cuttack - 754 022 Mob: +91 9777444936 E-mail: rb@bbsr.jspl.com

BANGALORE JINDAL STEEL AND POWER LTD. No.97/98, Goravigere Gate, Bidarhalli, Hobili, Hoskote-Whitefield Road, Post - Kannamangala, Bangalore -560067 M -+91-9036662106

Delhi M/s LMJ Logistics Ltd Khsra No. 42/29, Bakoli, GT Karnal Road, New Delhi- 110009 Mob: +91 9873973209 E-mail: dharmendra.raj@jindalsteel.com

Bhopal M/s Sanjay Shukla Survey No. 234, 235, Gram Sukhi, Sevania, Vidisha Road, Bhopal - 462 010 Mob: +91 9827478327 E-mail: as.yadav@jspl.com Chandigarh M/s VTC Transport Pvt Ltd 131 Industrial Area, Phase 1 Chandigarh - 160 101 Mob: +91 9814492033 E-mail: jatinder.seth@jspl.com

BIS

BIS

BV

IRS

Chennai M/s Sri Balaji Steel Agencies Plot No.4, Survey No. 110/2 Kadappakkam Village, Near Manali New Town, Vichoor Road, Manali Chennai - 600 103, Mob: +91 9840237966 E-mail: srihari@jspl.com

Faridabad M/s Sumer Sons Pvt Ltd Village Bhakri, Batkal-Pali Road Faridabad - 121 009 Mob: +91 9999700550 E-mail: ypkhanna@jspl.com Ghaziabad M/s Daya Steel Jindal Polyflex JV Pvt Ltd A-3, Udyog Kunj, UPSIDC Industrial Area 27 KM Stone, Hapur Bypass, NH 24 Ghaziabad - 201 001 Mob: +91 9997307666 E-mail: sanjay.jha@jindalsteel.com M/s Chachan Metals Pvt. Limited Khasra No.387-389 & 39 -394 Reliance Road, Gram: Bhavapur, Jindal Nagar, Ghaziabad - 201 302 GUWAHATI JINDAL STEEL AND POWER LTD. DAG no. 35,PATTA no. 102, Old 1474, New situated at Satgaon, Mauza Deltola,Kmrup Metro, Assam-781171

Jaipur M/s Sumer Sons Pvt Ltd C-11, Jhotwara Industrial Area, Jaipur - 302 012, Mob: +91 9166910666 E-mail: pawankumar.rana@jindalsteel.com Kanpur M/s Shree Gopal Industries 873 A, Kalpi Road Gram Umran, Rania, Kanpur - 209 311 Mob: +91 9971667034 E-mail: rajiv.mishra@jindalsteel.com Kolkata M/s Balmer Lawrie & Co. Ltd. 1, Sonapur Road, Near Jainkund Petrol Pump Kolkata - 700 088 Mob: +91 9007148468 E-mail: pk.singh@jspl.com Ludhiana M/s Sumer Sons Pvt Ltd Village Rajgarh, Tehsil Payal, Near Doraha, Ludhiana - 141 421 Mob: +91 8427629955 E-mail: sureshk@jspl.com Mumbai M/s Jyoti Logistics Pvt ltd Survey No. 72, NH-4 Old Mumbai-Pune Highway Khalapur,Distt. Raigad - 410 203 Mob: +91 9820811555 E-mail: amitkhona@jspl.com

MUMBAI JINDAL STEEL AND POWER LTD. C/o DAMANI SHIPPING PVT LTD. PLOT NO 147/2, 140/2, 147,3 OPP ASIS LOGISTICS, USATNE AMBERNATH, TALOJA BY PASS ROAD THANE 421502.

Raipur M/s Shri Kirshna Logistics Transport Nagar, Patrapali, Distt. Raipur Chattisgarh - 496 001 Mob: +91 9907185595 E-mail: murari@rpr.jspl.com Nagpur M/s Rita Steel 253/K-2 16 K.M. Milestone, Bhandara Road, Mahalgaon Tehsil Kamptee, Distt. Nagpur Maharastra - 441 202 Mob: +91 9923824063 E-mail: rshukla@jspl.com Patna M/s Shri Tejasawi Yadav March Marchi Road, Patna (Bihar) Mob: +91 9771424228 E-mail: praveen.brar@jspl.com

Rahuri M/s Continental Carriers of India Gate No 44, Near Rahuri Railway Station, Tandulwadi, Post-Rahuri, Ahmednagar, Maharashtra - 413 705, Mob: +91 9923001951 E-mail: dhiraj.jspl@gmail.com Rudrapur Khasra No. 642, On NH 74, 10 Mile Stone, Rudrapur, Kashipur Road, Near IBP Petrol Pump, Vill. dhaulpur, Post,Khanpur, Udhamsingh Nagar, Uttrakhand Mob: +91 9557064666 E-mail: sharad.bajpai@jindalsteel.com Vishakapatnam M/s. Maha Maruti Logistcs (P) Ltd. SYNO. 27/5, Seshadri Nagar, Chamalapalli Village Vepagunta, Vishakapatam - 530 047 Mob: +91 8008655007 E-mail: neelakanta.rao@jspl.com