Replacing Driveways and Driveway Bridges

ReplacingDrivewaysand DrivewayBridges

OlderDrivewaysLack Reinforcement

Most older driveways lack any rebar, and as a consequence they shift over time due to soil movement and drainage issues. For new driveways we remove some of the existing soil and install compacted base material that will settle less and also drain better. Then we install ½” rebar at 12” spacing to provide a substantial reinforcing .

StampedandColoredConcrete CanProvideMultipleLooks

A variety of finishes can be created using textures mats. Color or multiple colors can be added as well to create a special look. Sometimes we will start with a base color in the concrete mix, and then add a second powdered color during the stamping, highlighting the surface, particularly with stone textures

DrivewayDrainageisa CrucialConsideration

Downspouts adjacent to the front of the house are often routed under the driveway to their exit point. When driveways slope towards the garage a channel drain is usually installed to keep water out of the building. Once the plywood is installed on top of the framing, a bituthene membrane is installed, along with waterproofing.

DrilledPiersAreOften Required

On downslope properties in the hills the drive will often function as a bridge as well, sinc spans between the street and the house ov sloping hill.Because they are installed on a slo new foundations for driveway bridges o require reinforced concrete piers as part of construction.

TheFinishedProduct

This driveway bridge along with a new front entry was completed with stamped concrete and wood railings as the finished product. By combining modern engineering practices and proper waterproofing as part of the reconstruction