Catalog skyboltproduct

®

2017

SKYBOLT PRODUCT CATALOG Rev 041017

Manufacturer of Skytanium®-Steel and Stainless CLoc® Diamondhead® ALoc® ZLoc® ZLocker™ Quarter Turn Panel Fasteners – NASM5591 Table II Performance Distribution of Certified AN-MS-NAS Fasteners

AN-MS-NAS Fasteners – Panel Fasteners USA DFARS Manufacturing – Engineering Design TSO-C148 FAA-PMA AS9100 Compliant 9000 Airport Blvd Leesburg Regional Airport Leesburg, Florida 34788

352-326-0001 (Local) 800-223-1963 (Toll Free) 352-326-0012 (Fax) www.skybolt.com

Skybolt ® Panel Fasteners and Kits Panel Fastener Design CLoc®2000 Series

Series Introduction

Page Intro 1 and 2

2000 Series - General

1

Common Sets

2

How to Choose a CLoc® Fastener

4-6

2600 Studs - Slotted, Phillips, Wing, Ring, Folding Wing

7-9

2700 Studs - Slotted, Phillips

10

2800 Studs - Slotted, Phillips, Torx NASCAR Racing Fasteners

CLoc®4000 Series

3

2500 Studs

11 51.1-51.3

Retainers - SK2600-LWS, SK27S5-1, SK2600-SW

12

Anodizing MIL-A-8625 Standard and Hard Coat

12

212-213 Series Non Floating Receptacle

13

201-203 Series Floating Receptacle

14

209-210-230 Adjustable Depth Screw-In Receptacles

15

2000 Series Nutserts

16

220 Nut Retained Receptacles - Flanged

17

221 Nut Retained Receptacles - Countersunk

18

MS21078 Platenuts

19

4000 Series General

20

Common Sets - Panel Overlap

21

4002, 40S5, 40S45, ZG4002, Wing, Ring, Folding Wing Series 22-25 SK4000 Series Weights 26 Flush Grommets (G,H,40G1)

27

PlusFlush Grommets (N,N2,O, Ext Depth)

28

Ag Plane Grommets SKN4 and SK-N114 Series Grommets 28a PlusFlush Grommets (N3, ZG-LA, Ext Depth)

29

R4G Retainers - R560 Backing Grommet - Panel Configurations 30 214, 244, 40R17 Fixed Depth Non-Floating Receptacle 31 215 Adjustable Non-Floating Receptacle

32

245 Adjustable Floating Receptacle

33

410 Adjustable Depth Screw-In Receptacles

34

430 Adjustable Depth Screw-In Receptacles - Extended Nose35 4000 Series Nutserts

36

4003 Series Fasteners

37

Intentionally Left Blank

38-41

SK2003-14A, 24A, 42A, 50ADJ Platemounts - Camwashers 42-43

Skybolt Installation Tools ZLoc® Series

ALoc® Series Southco® Series Panel Kits

CLoc® Installation Tools

45-46

Racing Fasteners

47-51

EHF and EJ Series - Design Options

49

ZLoc® and ALoc® Tools

51

Studs, Grommets, Receptacles #82 and #85 Series Introduction

55 56-63

Complete Kit Cross Reference

64-70

Beech Bonanza Kit Application Vans RV Cowling Fastener Kits Billing and Returns Policy Skybolt Founders Skybolt Aeromotive Corp

52 53-54

Cowling Fastener Replacement Kits Cessna Conversion Kit Application

Skybolt Founders and Policies

44

Aviation Studs, Grommets

Copyright 2017 Index 01

71 72-73 74 123-124 125 Rev 061917

Rev 060616

Skybolt CLocÂŽ 2000 Series Fasteners 3 - Piece Series (Stud/Retainer - Locking Receptacle) ZG2500, ZG2600 See Page 4 and 9

SK2500W, ZG2500W, SK2600W, ZG2600W See Page 6 and 8

SK25S51, SK26S51 See Page 4 and 7 SK27S3, SK28S3, ZG28S3 See Page 10 and 11 SK2500R, ZG2500R, SK2600R, ZG2600R See Page 6 and 8

SK2500, SK2600 See Page 4 and 7 SK2700,SK2800 See Page 10 and 11

SK2600SFW, ZG2600SFW See Page 9

SK28T3 See Page 11

SK2500 and ZG2500 Series

SK2600 and ZG2600 Series

SK2700, SK2800 ZG2800 Series

For SK and ZG2600 Series Studs - Drill panel For SK and ZG 2700/2800 Series Studs to 1/4 (Precision -.257 or 6.53mm) Drill panel to 11/32 (Precision .328 or 8.33mm)

For SK and ZG2500 Series Studs - Drill panel to 1/4 (Precision -.257 or 6.53mm)

(Note: SK2600-SW Retainers will not work if drilled to .320) -or- Dimpled Panels - Drill to .213 (#3) then dimple to 100 degrees.

*Industry standard (non-machined) cups have a slight 'bump' that is .359 diameter.

*Industry standard (non-machined) cups have a slight 'bump' that is .359 diameter.

Outer Panel

.312 x .0620

.267 x .0620

For Retainers - See Page 12 SK212-10

SK212-12

Drill Center Hole 5/16 (7.94mm) for all panels

Drill Center Hole 13/32 (10.32mm) for all panels

Inner Support Panel

.500 12.699 mm

.625 15.875mm

.750 19.050mm

Receptacles - See Page 13 thru 18 Note: Add .100 to receptacle depth to allow for fastener protrusion when cycled lock to unlock (.500 + .100) = Clearance Requirement

Skybolt Aeromotive Corp

Copyright 2017 Page 1

Some Parts Special Order Only Refer to www.skybolt.com for current revision

Rev 010612

Skybolt CLoc® 2000 Series Common Sets Forget Charts - The followings assemblies solve 99% of all applications Stainless Series - Flush Head

Skytanium® Series - Flush Head

SK28S3-SET1

ZG28S3-SET2

Total

Total

Grip Range

SK28S3-2S Phillips Stud SK2600-LWS Stud Retainer SK213-2 Adjustable Receptacle

SK28S3-SET1 and ZG28S3-SET1 Shown

Grip Range

ZG28S3-2 Phillips Stud SK2600-LWS Stud Retainer SK213-2 Adjustable Receptacle

.040-.400

.040-.400

3/32" Rivets

1/8" Rivets

Most Common Aircraft Set Stainless Series - Protruding Head

Most Common NASCAR Set Skytanium® Series - Protruding Head

SK26S51-SET1

ZG2600-SET2

Total

Total

Grip Range

SK26S51-1S Phillips Stud SK2600-LWS Stud Retainer SK213-2 Adjustable Receptacle

Grip Range

ZG2600-1 Collared Slot Stud SK2600-LWS Stud Retainer SK213-2 Adjustable Receptacle

.040-.400

3/32" Rivets

.040-.400

1/8" Rivets

Note: Order SET1 for SK213-2 (3/32 Rivets). Order SET2 for SK213-28 (1/8 Rivets)

ZG2600-SET1 Shown

ZG28S3/SK28S3

ZG2600

SK26S51

SK213

What does Overlap Mean? Work from the Inner Panel out (Choose receptacle first), then determine location of pilot hole Pilot Hole

Either B Minimum* = .195 (SK2700); .250 (SK2600,SK2800) B

B Outer Panel C

C=

Inner Panel A

A

Minimum Panel Overlap = A Minimum x 2 Recommended .300 + A Minimum

Either A Minimum* = .178 (SK212-10 Receptacle) or .250 (SK212-12, SK213 or .315 (SK201/203 Series Receptacle) *Minimums reflect part dimensions in a perfect world installation.

Installation Tools Required Template-213

Skybolt Aeromotive Corp

Template to drill rivet holes with #30 Drill

Copyright 2017 Page 2

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 010612

How to Choose the Right CLoc® Fastener The application will determine the correct fastener.

1)

Is the application non-structural with no mass consideration?

Consider the CLoc® 2000 Series

2)

Is the application semi-structural with some mass to consider?

Consider the CLoc® 4000 or 6000 Series (if lip or panel overlap greater than 1.00)

3)

Is available lip or panel overlap restrictive?

(width required to mount receptacle)

.355 to .500 – Consider the CLoc® 2500 Series .500 to .710 – Consider the CLoc® 26000/2700/2800 Series .710* or more – Consider the CLoc® 4000 or 6000 Series (.860* for SK244/245 Rec) See diagram on Page 2 or Page 15 for panel configuration/restrictions.

4)

Is weight a factor?

Consider the Skytanium® CLoc® ZG Series for 30% to 50% Weight savings (without sacrificing steel strength ratings)

5)

Do you prefer a Rivet Receptacle? A crimp Receptacle? A Backing Nut Receptacle? Or a bonded Receptacle?

Need Convincing From Current Skybolt Customer Applications?

What is the most demanding endurance application that also requires the absolute lightest fastener?

Auto racing. Skybolt has engineered fasteners that are lighter but stronger than anything on the market. What works on Sundays also earns its wings 24/7 in the aerospace world, the defense world, the commercial applications world, and the marine world.      

Most NASCAR teams rely on Skybolt™ Skytanium® Series Fasteners for significant weight savings without any sacrifice in strength.

One of the world’s largest commercial aircraft companies found the perfect Avionics Fastener in the Skybolt™ Skytanium® CLoc® ZG2500 Series Fasteners – a 50% weight savings without sacrificing strength.

The Cessna 150, 172, 177, and 182 fleet just found major relief in the new Skybolt™ SK2003 Cowling Mount using CLoc® 4000 Series Stainless Fasteners.

The new Skybolt™ 6000 Series Fasteners are designed for IED (Explosive) applications and armor plating applications.

One of the world’s foremost producers of missile systems found the perfect CLoc® Adjustable Bonded Receptacle for composite structures.

Another world leader in aerospace manufacturing found the perfect CLoc® Receptacle for an anti-abrasive application.

Skybolt Aeromotive Corp

Copyright 2017 Page 3

Some Parts Special Order Only Refer to www.skybolt .com for current revision

Rev 062713

Skybolt CLoc® SK2500 ZG2500 Protruding Head Series

Stainless & Skytanium ® 3 - Piece Series (Stud/Retainer - Locking Receptacle) Light Weight Aerospace Panel Fasteners - 50% Weight Savings Designed for Restrictive (Minimum Overlap) Mounting Surfaces Reduced Thru-Hole Diameter For Mounting Close to Edge TSO-C148 Approved. Designed to Exceed NASM5591 Table II Performance Honeywell-Airbus Approvals - A380 Avionics (ZG2500 Series) Tensile/Shear Loads of 200 LBS Working - 300 Lbs Plus Ultimate SK2500SC ZG2500

ZG2500 Series Collared Slot (A= .375)

SK2500 Series Standard Slot (A= .302))

SK25S51 Series Phillips (A= .302))

SK25S51 ZG25S51

SK2500

Note: 2500 Series Studs may use SK212-10, SK212-12, or SK213 Series Receptacles SK212-10 Series Fixed Depth Receptacle Combined Panels Thickness Decimal Min Max

Protruding Head 2500 Series Stud

Total

Thickness Millimeter Min Max

Stud Length L Decimal Millimeter

Stainless Standard Slot

Stainless Collared Slot

Stainless Phillips

Skytanium Collared Slot

Skytanium Phillips(1)

.010

.029

0.254

0.737

.730

18.542

SK2500-0S

SK2500SC0S

SK25S51-0

ZG2500-0

ZG25S51-0

.030

.059

0.762

1.499

.760

19.304

SK2500-1S

SK2500SC1S

SK25S51-1

ZG2500-1

ZG25S51-1

.060

.089

1.524

2.261

.790

20.066

SK2500-2S

SK2500SC2S

SK25S51-2

ZG2500-2

ZG25S51-2

.090

.119

2.286

3.023

.820

20.828

SK2500-3S

SK2500SC3S

SK25S51-3

ZG2500-3

ZG25S51-3

.120

.149

3.048

3.785

.850

21.590

SK2500-4S

SK2500SC4S

SK25S51-4

ZG2500-4

ZG25S51-4

.150

.179

3.810

4.547

.880

22.352

SK2500-5S

SK2500SC5S

SK25S51-5

ZG2500-5

ZG25S51-5

.180

.209

4.572

5.309

.910

23.114

SK2500-6S

SK2500SC6S

SK25S51-6

ZG2500-6

ZG25S51-6

.210

.239

5.334

6.071

.940

23.876

SK2500-7S

SK2500SC7S

SK25S51-7

ZG2500-7

ZG25S51-7

.240

.269

6.096

6.833

.970

24.638

SK2500-8S

SK2500SC8S

SK25S51-8

ZG2500-8

ZG25S51-8

.270

.299

6.858

7.595

1.000

25.400

SK2500-9S

SK2500SC9S

SK25S51-9

ZG2500-9

ZG25S51-9

.300

.329

7.620

8.357

1.030

26.162

SK2500-10S

SK2500SC10S

SK25S51-10

ZG2500-10

ZG25S51-10

.330

.359

8.382

9.119

1.060

26.924

SK2500-11S

SK2500SC11S

SK25S51-11

ZG2500-11

ZG25S51-11

.360

.389

9.144

9.881

1.090

27.686

SK2500-12S

SK2500SC12S

SK25S51-12

ZG2500-12

ZG25S51-12

.390

.419

9.906

10.643

1.120

28.448

SK2500-13S

SK2500SC13S

SK25S51-13

ZG2500-13

ZG25S51-13

.420

.449

10.668

11.405

1.150

29.210

SK2500-14S

SK2500SC14S

SK25S51-14

ZG2500-14

ZG25S51-14

.450

.479

11.430

12.167

1.180

29.972

SK2500-15S

SK2500SC15S

SK25S51-15

ZG2500-15

ZG25S51-15

Note: See page 12 for plating options and part# suffix. Note (1) ZG25S51 use stainless Stud/Skytanium Cup.

Skybolt Aeromotive Corp

Copyright 2013 Page 4

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 062812

Skybolt CLoc® SK2500 ZG2500 Flush Head Series Stainless & Skytanium ® 3 - Piece Series (Stud/Retainer - Locking Receptacle) Light Weight Aerospace Panel Fasteners - 50% Weight Savings Designed for Restrictive (Minimum Overlap) Mounting Surfaces Reduced Thru-Hole Diameter For Mounting Close to Edge Tensile/Shear Loads of 200 LBS Working - 300 Lbs Plus Ultimate TSO-C148 Approved. Designed to Exceed NASM5591 Table II Performance

SK25S3 ZG25S3 .267

Note: 2500 Series Studs may use SK212-10, SK212-12, or SK213 Series Receptacles SK212-10 Series Fixed Depth Receptacle Combined Panel Thickness Decimal Min Max

Total

Thickness Millimeter Min Max

Stud Length L Decimal Millimeter

Flush Head 2500 Series Stud Stainless Phillips

Skytanium Phillips (1)

.010

.029

0.254

0.737

.610

15.494

SK25S3-1S

ZG25S3-1

.030

.059

0.762

1.499

.640

16.256

SK25S3-2S

ZG25S3-2

.060

.089

1.524

2.261

.670

17.018

SK25S3-3S

ZG25S3-3

.090

.119

2.286

3.023

.700

17.780

SK25S3-4S

ZG25S3-4

.120

.149

3.048

3.785

.730

18.542

SK25S3-5S

ZG25S3-5

.150

.179

3.810

4.547

.760

19.304

SK25S3-6S

ZG25S3-6

.180

.209

4.572

5.309

.790

20.066

SK25S3-7S

ZG25S3-7

.210

.239

5.334

6.071

.820

20.828

SK25S3-8S

ZG25S3-8

.240

.269

6.096

6.833

.850

21.590

SK25S3-9S

ZG25S3-9

.270

.299

6.858

7.595

.880

22.352

SK25S3-10S

ZG25S3-10

.300

.329

7.620

8.357

.910

23.114

SK25S3-11S

ZG25S3-11

.330

.359

8.382

9.119

.940

23.876

SK25S3-12S

ZG25S3-12

.360

.389

9.144

9.881

.970

24.638

SK25S3-13S

ZG25S3-13

.390

.419

9.906

10.643

1.000

25.400

SK25S3-14S

ZG25S3-14

.420

.449

10.668

11.405

1.030

26.162

SK25S3-15S

ZG25S3-15

.450

.479

11.430

12.167

1.060

26.924

SK25S3-16S

ZG25S3-16

Note: See page 12 for plating options and part# suffix Note (1) ZG25S3 use stainless stud/Skytanium cup.

Skybolt Aeromotive Corp

Copyright 2012 Page 5

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 022114

Skybolt CLoc® SK2500 Winged & Folding Ring Series Stainless & Skytanium ® 3 - Piece Series (Stud/Retainer - Locking Receptacle) Light Weight Aerospace Panel Fasteners - 50% Weight Savings Designed for Restrictive (Minimum Overlap) Mounting Surfaces Reduced Thru-Hole Diameter For Mounting Close to Edge TSO-C148 Approved. Designed to Exceed NASM5591 Table II Performance ZG2500R Series Honeywell-Airbus Approvals - A380 Avionics Tensile/Shear Loads of 200 LBS Working - 300 Lbs Plus Ultimate

SK2500W and ZG2500W

SK2500R and ZG2500R

Note: 2500 Series Studs may use SK212-10, SK212-12, or SK213 Series Receptacles.

Winged Head 2500 Series Studs

SK212-10 Series Fixed Depth

Folding Ring Head 2500 Series Studs

Receptacle Combined Panel Thickness

Thickness

Stud Length

Decimal

Millimeter

L

Stainless

Skytanium

Stud Length Stainless

Skytanium

Decimal Millimeter

Wing

Wing

Decimal

Millimeter

Folding Ring

Folding Ring

L

Min

Max

Min

Max

0.010

0.029

0.254

0.737

.730

18.542

SK2500-0SW

ZG2500-0W

.795

20.193

SK2500R0S

ZG2500R0

0.030

0.059

0.762

1.499

.760

19.304

SK2500-1SW

ZG2500-1W

.825

20.955

SK2500R1S

ZG2500R1

0.060

0.089

1.524

2.261

.790

20.066

SK2500-2SW

ZG2500-2W

.855

21.717

SK2500R2S

ZG2500R2

0.090

0.119

2.286

3.023

.820

20.828

SK2500-3SW

ZG2500-3W

.885

22.479

SK2500R3S

ZG2500R3

0.120

0.149

3.048

3.785

.850

21.590

SK2500-4SW

ZG2500-4W

.915

23.241

SK2500R4S

ZG2500R4

0.150

0.179

3.810

4.547

.880

22.352

SK2500-5SW

ZG2500-5W

.945

24.003

SK2500R5S

ZG2500R5

0.180

0.209

4.572

5.309

.910

23.114

SK2500-6SW

ZG2500-6W

.975

24.765

SK2500R6S

ZG2500R6

0.210

0.239

5.334

6.071

.940

23.876

SK2500-7SW

ZG2500-7W

1.005

25.527

SK2500R7S

ZG2500R7

0.240

0.269

6.096

6.833

.970

24.638

SK2500-8SW

ZG2500-8W

1.035

26.289

SK2500R8S

ZG2500R8

0.270

0.299

6.858

7.595

1.000

25.400

SK2500-9SW

ZG2500-9W

1.065

27.051

SK2500R9S

ZG2500R9

0.300

0.329

7.620

8.357

1.030

26.162

SK2500-10SW

ZG2500-10W

1.095

27.813

SK2500R10S

ZG2500R10

0.330

0.359

8.382

9.119

1.060

26.924

SK2500-11SW

ZG2500-11W

1.125

28.575

SK2500R11S

ZG2500R11

0.360

0.389

9.144

9.881

1.090

27.686

SK2500-12SW

ZG2500-12W

1.155

29.337

SK2500R12S

ZG2500R12

0.390

0.419

9.906

10.643

1.120

28.448

SK2500-13SW

ZG2500-13W

1.185

30.099

SK2500R13S

ZG2500R13

0.420

0.449

10.668

11.405

1.150

29.210

SK2500-14SW

ZG2500-14W

1.215

30.861

SK2500R14S

ZG2500R14

0.450

0.479

11.430

12.167

1.180

29.972

SK2500-15SW

ZG2500-15W

1.245

31.623

SK2500R15S

ZG2500R15

Note: See page 12 for plating options and part# suffix

Skybolt Aeromotive Corp

Copyright 2014 Page 6

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 102114

Skybolt CLoc® SK2600 ZG2600 Protruding Head Series Stainless & Skytanium ® 3 - Piece Series (Stud/Retainer - Locking Receptacle) TSO-C148 Approved. Designed to exhedd NASM5591 Table II Performance Tensile/Shear Loads of 200 LBS Working - 300* Lbs Plus Ultimate ZG2600 Series Collared Slot A= .375 SK26S51 Series Phillips Head A= .302 SK2600 Series Standard Slot A= .302 ZG2600

SK26S51 ZG26S51

SK2600

Note: 2600 Series Studs will not fit SK212-10 Series Receptacles. Use SK212-12 or SK213 Series Receptacle SK213-1* and -2 Series

Fixed Depth

Adjustable Depth

Stainless

Stainless

Skytanium

Receptacle

Receptacle

Standard Slot

Phillips

Collared Slot

Phillips (1)

Combined Panel

Combined Panel

Total

Camloc®

Camloc®

Thickness (SK213-2)

Stud Length

2600S Series

26S51 Series

L

Monadnock®

Monadnock®

Decimal Millimeter

1126007 Series

1126008 Series

Thickness Decimal Min

Protruding Head 2600 Series Studs

SK212 Series

Max

Thickness Millimeter

Decimal

Millimeter

Skytanium

Min

Max

Min*

Max

Min

Max

0.010 0.029

0.254

0.737

.020

.290

0.508

7.366

.730

18.542

SK2600-0S

SK26S51-0

ZG2600-0

ZG26S51-0

0.030 0.059

0.762

1.499

.020

.320

0.508

8.128

.760

19.304

SK2600-1S

SK26S51-1

ZG2600-1

ZG26S51-1

0.060 0.089

1.524

2.261

.020

.350

0.508

8.890

.790

20.066

SK2600-2S

SK26S51-2

ZG2600-2

ZG26S51-2

0.090 0.119

2.286

3.023

.050

.380

1.270

9.652

.820

20.828

SK2600-3S

SK26S51-3

ZG2600-3

ZG26S51-3

0.120 0.149

3.048

3.785

.080

.410

2.032

10.414

.850

21.590

SK2600-4S

SK26S51-4

ZG2600-4

ZG26S51-4

0.150 0.179

3.810

4.547

.110

.440

2.794

11.176

.880

22.352

SK2600-5S

SK26S51-5

ZG2600-5

ZG26S51-5

0.180 0.209

4.572

5.309

.140

.470

3.556

11.938

.910

23.114

SK2600-6S

SK26S51-6

ZG2600-6

ZG26S51-6

0.210 0.239

5.334

6.071

.170

.500

4.318

12.700

.940

23.876

SK2600-7S

SK26S51-7

ZG2600-7

ZG26S51-7

0.240 0.269

6.096

6.833

.200

.530

5.080

13.462

.970

24.638

SK2600-8S

SK26S51-8

ZG2600-8

ZG26S51-8

0.270 0.299

6.858

7.595

.230

.560

5.842

14.224

1.000

25.400

SK2600-9S

SK26S51-9

ZG2600-9

ZG26S51-9

0.300 0.329

7.620

8.357

.260

.590

6.604

14.986

1.030

26.162

SK2600-10S

SK26S51-10

ZG2600-10

ZG26S51-10

0.330 0.359

8.382

9.119

.290

.620

7.366

15.748

1.060

26.924

SK2600-11S

SK26S51-11

ZG2600-11

ZG26S51-11

0.360 0.389

9.144

9.881

.320

.650

8.128

16.510

1.090

27.686

SK2600-12S

SK26S51-12

ZG2600-12

ZG26S51-12

0.390 0.419

9.906

10.643

.350

.680

8.890

17.272

1.120

28.448

SK2600-13S

SK26S51-13

ZG2600-13

ZG26S51-13

0.420 0.449

10.668 11.405

.380

.710

9.652

18.034

1.150

29.210

SK2600-14S

SK26S51-14

ZG2600-14

ZG26S51-14

0.450 0.479

11.430 12.167

.410

.740

10.414 18.796

1.180

29.972

SK2600-15S

SK26S51-15

ZG2600-15

ZG26S51-15

* For SK213-1 Receptacles, add .120 to Min Grip. Note (1) ZG26S51 use stainless stud/Skytanium cup. Note: Cloc-Camloc grip charts are identical for 2600 Series parts. Physical dimensions are identical. See page 12 for plating options and part# suffix. Tested to 600 lbs. Skybolt stainless CLoc® testing exceeds NASM5591 standards for tensile/shear and endurance.

Skybolt Aeromotive Corp

Copyright 2014 Page 7

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 102114

Skybolt CLoc® SK2600 Winged & Folding Ring Series Stainless & Skytanium ® 3 - Piece Series (Stud/Retainer - Locking Receptacle) TSO-C148 Approved. Designed to Exceed NASM5591 Table II Performance Tensile/Shear Loads of 200 LBS Working - 300* Lbs Plus Ultimate

SK2600W and ZG2600W

SK2600R and ZG2600R

Note: 2600 Series Studs will not fit SK212-10 Series Receptacles. Use SK212-12 or SK213 Series Receptacle

Winged 2600 Series Studs

Folding Ring Head 2600 Series Studs

SK212 Series

SK213-1* and -2 Series

Fixed Depth

Adjustable Depth

Stainless

Skytanium

Stainless

Skytanium

Receptacle

Receptacle

Wing

Wing

Folding Ring

Folding Ring

Combined Panel Thickness Decimal

Thickness Millimeter

Combined Panel

Total

Camloc®

Thickness (SK213-2)

Stud Length

2600SW Series

L

Monadnock®

Decimal

Millimeter

Total Stud Length L

Min

Max

Min

Max

Min*

Max

Min

Max

Decimal Millimeter 1126014 Series

Decimal Millimeter

.010

.029

0.254

0.737

.020

.290

0.508

7.366

.730

18.542

SK2600-0SW

ZG2600-0W

.795

20.193

SK2600R0S

ZG2600R0

.030

.059

0.762

1.499

.020

.320

0.508

8.128

.760

19.304

SK2600-1SW

ZG2600-1W

.825

20.955

SK2600R1S

ZG2600R1

.060

.089

1.524

2.261

.020

.350

0.508

8.890

.790

20.066

SK2600-2SW

ZG2600-2W

.855

21.717

SK2600R2S

ZG2600R2

.090

.119

2.286

3.023

.050

.380

1.270

9.652

.820

20.828

SK2600-3SW

ZG2600-3W

.885

22.479

SK2600R3S

ZG2600R3

.120

.149

3.048

3.785

.080

.410

2.032 10.414

.850

21.590

SK2600-4SW

ZG2600-4W

.915

23.241

SK2600R4S

ZG2600R4

.150

.179

3.810

4.547

.110

.440

2.794 11.176

.880

22.352

SK2600-5SW

ZG2600-5W

.945

24.003

SK2600R5S

ZG2600R5

.180

.209

4.572

5.309

.140

.470

3.556 11.938

.910

23.114

SK2600-6SW

ZG2600-6W

.975

24.765

SK2600R6S

ZG2600R6

.210

.239

5.334

6.071

.170

.500

4.318 12.700

.940

23.876

SK2600-7SW

ZG2600-7W

1.005

25.527

SK2600R7S

ZG2600R7

.240

.269

6.096

6.833

.200

.530

5.080 13.462

.970

24.638

SK2600-8SW

ZG2600-8W

1.035

26.289

SK2600R8S

ZG2600R8

.270

.299

6.858

7.595

.230

.560

5.842 14.224

1.000

25.400

SK2600-9SW

ZG2600-9W

1.065

27.051

SK2600R9S

ZG2600R9

.300

.329

7.620

8.357

.260

.590

6.604 14.986

1.030

26.162

SK2600-10SW ZG2600-10W

1.095

27.813

SK2600R10S

ZG2600R10

.330

.359

8.382

9.119

.290

.620

7.366 15.748

1.060

26.924

SK2600-11SW ZG2600-11W

1.125

28.575

SK2600R11S

ZG2600R11

.360

.389

9.144

9.881

.320

.650

8.128 16.510

1.090

27.686

SK2600-12SW ZG2600-12W

1.155

29.337

SK2600R12S

ZG2600R12

.390

.419

9.906 10.643

.350

.680

8.890 17.272

1.120

28.448

SK2600-13SW ZG2600-13W

1.185

30.099

SK2600R13S

ZG2600R13

.420

.449

10.668 11.405

.380

.710

9.652 18.034

1.150

29.210

SK2600-14SW ZG2600-14W

1.215

30.861

SK2600R14S

ZG2600R14

.450

.479

11.430 12.167

.410

.740

10.414 18.796

1.180

29.972

SK2600-15SW ZG2600-15W

1.245

31.623

SK2600R15S

ZG2600R15

* For SK213-1 Receptacles, add .120 to Min Grip. Note (1) ZG26S51 use stainless stud/Skytanium cup. Note: Cloc-Camloc grip charts are identical for 2600 Series parts. Physical dimensions are identical. See page 12 for plating options and part# suffix. Tested to 600 lbs. Skybolt stainless CLoc® testing exceeds NASM5591 standards for tensile/shear and endurance.

Skybolt Aeromotive Corp

Copyright 2014 Page 8

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 080516

Skybolt Cloc® SK2600 Folding Wing Series Stainless & Skytanium ® 3 - Piece Series (Stud/Retainer - Locking Receptacle) Designed to Exceed NASM5591 Table II Performance. TSO Pending Tensile/Shear Loads of 200 LBS Working - 300 Lbs Plus Ultimate

US Patent Pending

SK2600 Style Folding Wing

SK2601 Style Folding Wing

For all Dash#s A

B(1)

C

D (1)

Decimal

mm

Decimal

mm

Decimal

mm

Decimal

mm

SK2600SFW

1.080

27.432

.760

19.304

.567

14.402

.375

9.525

SK2601SFW

1.000

25.400

.993

25.222

.800

20.320

.375

9.525

Note (1) B & D dimensions - Nominal locked position Note: 2600 Series Studs will not fit SK212-10 Series Receptacles. Use SK212-12 or SK213 Series Receptacle SK212 Series

SK213-1* and -2 Series

Fixed Depth

Adjustable Depth

Folding Wing 2600 Series Studs

Receptacle

Receptacle

Combined Panel

Combined Panel

Total

Thickness (SK213-2)

Stud Length

Thickness

Thickness

Decimal

Millimeter

Decimal

Millimeter

L

SK2600 Series SK2601 Series Stainless

Stainless

Min

Max

Min

Max

Min*

Max

Min

Max

Decimal

mm

Folding Wing

Folding Wing

.010

.029

0.254

0.737

.020

.290

0.508

7.366

0.890

22.606

SK2600-0SFW

SK2601-0SFW

.030

.059

0.762

1.499

.020

.320

0.508

8.128

0.920

23.368

SK2600-1SFW

SK2601-1SFW

.060

.089

1.524

2.261

.020

.350

0.508

8.890

0.950

24.130

SK2600-2SFW

SK2601-2SFW

.090

.119

2.286

3.023

.050

.380

1.270

9.652

0.980

24.892

SK2600-3SFW

SK2601-3SFW

.120

.149

3.048

3.785

.080

.410

2.032

10.414

1.010

25.654

SK2600-4SFW

SK2601-4SFW

.150

.179

3.810

4.547

.110

.440

2.794

11.176

1.040

26.416

SK2600-5SFW

SK2601-5SFW

.180

.209

4.572

5.309

.140

.470

3.556

11.938

1.070

27.178

SK2600-6SFW

SK2601-6SFW

.210

.239

5.334

6.071

.170

.500

4.318

12.700

1.100

27.940

SK2600-7SFW

SK2601-7SFW

.240

.269

6.096

6.833

.200

.530

5.080

13.462

1.130

28.702

SK2600-8SFW

SK2601-8SFW

.270

.299

6.858

7.595

.230

.560

5.842

14.224

1.160

29.464

SK2600-9SFW

SK2601-9SFW

.300

.329

7.620

8.357

.260

.590

6.604

14.986

1.190

30.226

SK2600-10SFW SK2601-10SFW

.330

.359

8.382

9.119

.290

.620

7.366

15.748

1.220

30.988

SK2600-11SFW SK2601-11SFW

.360

.389

9.144

9.881

.320

.650

8.128

16.510

1.250

31.750

SK2600-12SFW SK2601-12SFW

.390

.419

9.906

10.643

.350

.680

8.890

17.272

1.280

32.512

SK2600-13SFW SK2601-13SFW

.420

.449

10.668

11.405

.380

.710

9.652

18.034

1.310

33.274

SK2600-14SFW SK2601-14SFW

.450

.479

11.430

12.167

.410

.740

10.414

18.796

1.340

34.036

SK2600-15SFW SK2601-15SFW

* For SK213-1 Receptacles, add .120 to Min Grip. Note: Cloc-Camloc grip charts are identical for 2600 Series parts. .

Skybolt Aeromotive Corp

Copyright 2016 Page 9

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 042015

Skybolt CLoc® SK2700 Flush Head Series Stainless 3 - Piece Series (Stud/Retainer - Locking Receptacle) TSO-C148 Approved. Designed to Exceed NASM5591 Table II Performance Tensile/Shear Loads of 200 LBS Working - 300* Lbs Plus Ultimate

SK27S3S

SK2700S

Note: 2700 Series Studs will not fit SK212-10 Series Receptacles. Use SK212-12 or SK213 Series Receptacle

Flush Head 2700 Series Stud

SK212 Series

SK213-1* and -2 Series

Fixed Depth

Adjustable Depth

Stainless

Receptacle

Receptacle

Standard Slot

Phillips

Combined Panel

Combined Panel

Total

Camloc®

Camloc®

Thickness (SK213-2)

Stud Length

2700S Series

27S3S Series

L Decimal Millimeter

Monadnock®

Monadnock®

1127003 Series

1127009 Series

Thickness

Thickness

Decimal Min Max

Millimeter Min Max

Decimal Min* Max

Millimeter Min Max

Stainless

.010

.029

0.254

0.737

.020

.270

0.508

6.858

.610

15.494

SK2700-1S

SK27S3-1S

.030

.059

0.762

1.499

.020

.300

0.508

7.620

.640

16.256

SK2700-2S

SK27S3-2S

.060

.089

1.524

2.261

.050

.330

1.270

8.382

.670

17.018

SK2700-3S

SK27S3-3S

.090

.119

2.286

3.023

.080

.360

2.032

9.144

.700

17.780

SK2700-4S

SK27S3-4S

.120

.149

3.048

3.785

.110

.390

2.794

9.906

.730

18.542

SK2700-5S

SK27S3-5S

.150

.179

3.810

4.547

.140

.420

3.556

10.668

.760

19.304

SK2700-6S

SK27S3-6S

.180

.209

4.572

5.309

.170

.450

4.318

11.430

.790

20.066

SK2700-7S

SK27S3-7S

.210

.239

5.334

6.071

.200

.480

5.080

12.192

.820

20.828

SK2700-8S

SK27S3-8S

.240

.269

6.096

6.833

.230

.510

5.842

12.954

.850

21.590

SK2700-9S

SK27S3-9S

.270

.299

6.858

7.595

.260

.540

6.604

13.716

.880

22.352

SK2700-10S

SK27S3-10S

.300

.329

7.620

8.357

.290

.570

7.366

14.478

.910

23.114

SK2700-11S

SK27S3-11S

.330

.359

8.382

9.119

.320

.600

8.128

15.240

.940

23.876

SK2700-12S

SK27S3-12S

.360

.389

9.144

9.881

.350

.630

8.890

16.002

.970

24.638

SK2700-13S

SK27S3-13S

.390

.419

9.906

10.643

.380

.660

9.652

16.764

1.000

25.400

SK2700-14S

SK27S3-14S

.420 .450

.449 .479

10.668 11.430

11.405 12.167

.410 .440

.690 .720

10.414 11.176

17.526 18.288

1.030 1.060

26.162 26.924

SK2700-15S SK2700-16S

SK27S3-15S SK27S3-16S

* For SK213-1 Series Receptacles - Add .120 to min thickness (shorter barrel) Note: Cloc-Camloc grip charts are not identical for 2700 Series parts. Physical dimensions are identical. Note: See page 12 for plating options and part# suffix. Tested to 600 lbs. Skybolt stainless CLoc® testing exceeds NASM5591 standards for tensile/shear and endurance.

Skybolt Aeromotive Corp

Copyright 2015 Page 10

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 040916

Skybolt CLoc® SK2800 Flush Head Series Stainless & Skytanium ® 3 - Piece Series (Stud/Retainer - Locking Receptacle) TSO-C148 Approved. Designed to Exceed NASM5591 Table II Performance Tensile/Shear Loads of 200 LBS Working - 300 Lbs Plus Ultimate

SK28T3 ZG28T3

SK2800S .328

SK28S3 and ZG28S3

Note: 2800 Series Studs will not fit SK212-10 Series Receptacles. Use SK212-12 or SK213 Series Receptacle SK212 Series

SK213-1* and -2 Series

Fixed Depth

Adjustable Depth

Receptacle

Receptacle

Combined Panel

Combined Panel

Total

Thickness (SK213-2)

Stud Length

Thickness

Thickness

Decimal

Millimeter

Decimal

Millimeter

L

Flush Head 2800 Series Stud Stainless

Stainless

Skytanium

Skytanium

Phillips

Phillips (2)

#15 Torx (3)

SK2800-1S

SK28S3-1S

ZG28S3-1

ZG28T3-1

SK2800-2S

SK28S3-2S

ZG28S3-2

ZG28T3-2

17.018

SK2800-3S

SK28S3-3S

ZG28S3-3

ZG28T3-3

.700

17.780

SK2800-4S

SK28S3-4S

ZG28S3-4

ZG28T3-4

9.906

.730

18.542

SK2800-5S

SK28S3-5S

ZG28S3-5

ZG28T3-5

3.556

10.668

.760

19.304

SK2800-6S

SK28S3-6S

ZG28S3-6

ZG28T3-6

.450

4.318

11.430

.790

20.066

SK2800-7S

SK28S3-7S

ZG28S3-7

ZG28T3-7

.200

.480

5.080

12.192

.820

20.828

SK2800-8S

SK28S3-8S

ZG28S3-8

ZG28T3-8

6.833

.230

.510

5.842

12.954

.850

21.590

SK2800-9S

SK28S3-9S

ZG28S3-9

ZG28T3-9

6.858

7.595

.260

.540

6.604

13.716

.880

22.352

SK2800-10S

SK28S3-10S

ZG28S3-10

ZG28T3-10

.329

7.620

8.357

.290

.570

7.366

14.478

.910

23.114

SK2800-11S

SK28S3-11S

ZG28S3-11

ZG28T3-11

.359

8.382

9.119

.320

.600

8.128

15.240

.940

23.876

SK2800-12S

SK28S3-12S

ZG28S3-12

ZG28T3-12

.360

.389

9.144

9.881

.350

.630

8.890

16.002

.970

24.638

SK2800-13S

SK28S3-13S

ZG28S3-13

ZG28T3-13

.390

.419

9.906

10.643

.380

.660

9.652

16.764

1.000

25.400

SK2800-14S

SK28S3-14S

ZG28S3-14

ZG28T3-14

.420

.449

10.668

11.405

.410

.690

10.414

17.526

1.030

26.162

SK2800-15S

SK28S3-15S

ZG28S3-15

ZG28T3-15

.450

.479

11.430

12.167

.440

.720

11.176

18.288

1.060

26.924

SK2800-16S

SK28S3-16S

ZG28S3-16

ZG28T3-16

Min

Max

Min

Max

Min*

Max

Min

Max

Decimal Millimeter Standard Slot

.010

.029

0.254

0.737

.020

.270

0.508

6.858

.610

15.494

.030

.059

0.762

1.499

.020

.300

0.508

7.620

.640

16.256

.060

.089

1.524

2.261

.050

.330

1.270

8.382

.670

.090

.119

2.286

3.023

.080

.360

2.032

9.144

.120

.149

3.048

3.785

.110

.390

2.794

.150

.179

3.810

4.547

.140

.420

.180

.209

4.572

5.309

.170

.210

.239

5.334

6.071

.240

.269

6.096

.270

.299

.300 .330

* For SK213-1 Series Receptacles - Add .120 to min thickness (shorter barrel) Note: Cloc-Camloc grip charts are not identical for 2800 Series parts. Physical dimensions are identical. Note (2) ZG28S3 use stainless stud/Skytanium cup. (3) Skytanium stud/cup Note: See page 12 for plating options and part# suffix

Skybolt Aeromotive Corp

Copyright 2016 Page 11

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 010612

Skybolt CLocÂŽ 2000 Series Retainers

SK2600-LWS Solid Retaining Ring General Purpose

SK27S5-1 Solid Retaining Ring for Dimpled Panels Designed for SK2700 or SK2800 Flush Studs installed in a thin dimpled panel.

Will not allow studs to retract when unlocked. Install with SK-T2698 Tool

Designed as a general purpose retainer. Will not allow studs to retract when unlocked. Install with SK-T2698 Tool.

Replaces 2600-LW or 1127700 (Steel)

Replaces 27S5-1 or 1127301 (Steel)

Install with SK-T2698 Tool. Only install after all studs have been fitted. Place retainer flat on the end of the stud cup; use slotted end of tool to push retainer until secure with the panel.

SK2600-SW Split Ring Retainer Designed for a curved panel application that require studs to retract when unlocked. They will not function with any 2700 or 2800 Series Studs with oversized drilled holes for the cup dimple. They will only work with .257 holes (after dimpling panel) or a countersunk panel with .257 hole.

Replaces 2600-SW or 1127722 (Steel)

With pliers, bend open at the split; twist washer around stud crosspin; bend close. See www.skybolt.com for details.

MIL-A-8625 Anodizing Standard Anodizing MIL-A-8625, Type II, Class 1 Add Finish Par# Suffix Example Clear A ZG2500-4A Standard anodizing - Clear Standard Anodizing MIL-A-8625, Type II, Class 2 Add Finish Par# Suffix Example Black A1BLK ZG2500-4A1BLK Standard anodizing - Black Red A1RED ZG2500-4A1RED Standard anodizing - Red Hard Anodizing MIL-8625, Type III, Class 1 Add Finish Par# Suffix Example Clear B ZG2500-4B Hard anodizing - Clear Hard Anodizing MIL-8625, Type III, Class 2 Add Finish Par# Suffix Example Black B1BLK ZG2500-4B1BLK Hard anodizing - Black Red B1RED ZG2500-4B1RED Hard anodizing - Red

Skybolt Aeromotive Corp

Copyright 2017 Page 12

Some Part#s Special Order Only See www.skybolt.com for current revision

Rev 012614

Skybolt CLocÂŽ 2000 Series Rivet Receptacles 3 - Piece Series (Stud/Retainer - Locking Receptacle) Standard SK212 Fixed Depth Receptacles

SK212-10 SK212-10

SK212-12

Material

TypeFinish

Rivet Size

Weight

Steel

Machined/Zinc

3/32

.0100/4.5g

SK212-12

Material

Type/Finish

Rivet Size

Weight

Steel

Machined/Zinc

3/32

.0105/4.8g

Cast/None

SK212-10A

Alum6061 Machined/None

3/32

.0030/1.4

SK212-12ACA

Alum380

SK212-10AB

Alum6061 Machined/Anod

3/32

.0030/1.4

SK212-12A

Alum6061 Machined/None

SK212-10S

Stain303 Machined/None

3/32

.0100/4.5

SK212-12A8CA

Alum380

1/8

.0040/1.9

SK212-12A8

Alum6061 Machined/None

1/8

.0035/1.7

* SK212-12AC

Alum6061

Anti Chafe

1/8

.0040/1.8

* SK212-12AC2

Alum6061

Anti Chafe

1/8

.0040/1.8

SK212-12S

Stain303

Machined/None

3/32

.0105/4.8

Cast/None

3/32

.0040/1.9

3/32

.0035/1.7

* Anti-Chafe - Prevents wire from contacting any moving parts

SK213 Adjustable Receptacles

Standard Adjustable Depth Receptacles Material

Finish

Rivet Size

Weight

L

SK213-1

Skytanium Machined/None

3/32

.0070/3.2 .410

SK213-1S

Stain303

Machined/None

3/32

.0155/7.1 .410

SK213-2

Skytanium Machined/None

3/32

.0070/3.2 .530

SK213-2D

Skytanium Machined/None

3/32csk

.0070/3.2 .530

SK213-26D

Skytanium Machined/None

3/32csk

.0070/3.2 .530

SK213-28

Skytanium Machined/None

1/8

.0070/3.2 .530

SK213-28D

Skytanium Machined/None

1/8csk

.0070/3.2 .530

SK213-2 (3/32 Rivet holes) SK213-28 (1/8 Rivet Holes)

Note: SK213-26 has 11/16 Rivet Spacing

Skybolt Aeromotive Corp

Copyright 2017 Page 13

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 052914

Skybolt CLocÂŽ 2000 Series Floating Receptacles SK201 and SK203 Floating Receptacles Rivet - 3/32 and Bonded Versions Fixed Depth and Adjustable Versions Float +/- .050 (x and y) Removable - Replacable Insert Cage Dimensions - 1.020 x .630 Panel Overlap - Max Float - Desired .650 New for 2014 - Easy install Insert Locking Clip - Easy to remove; easy to install/replace

SK201 Foating Receptacle - Fixed Depth Fixed Depth Insert

Rivet/ Spacing

Height

Lbs

Grams

Grip(1)

Grip(1)

SK28S3-2

SK26S51-2

Cage

Insert

SK201C01

Stainless

Stainless

Bonded

.490

.0180

8.2

.030-.059

.060-.089

SK201C21

Stainless

Stainless

3/32x.75

.490

.0180

8.2

.030-.059

.060-.089

SK201C01A

Stainless

Aluminum

Bonded

.490

.0110

5.9

.030-.059

.060-.089

SK201C21A

Stainless

Aluminum

3/32x.75

.490

.0110

5.9

.030-.059

.060-.089

SK201A01A

Aluminum

Aluminum

Bonded

.490

.0095

4.3

.030-.059

.060-.089

SK201A21A

Aluminum

Aluminum

3/32x.75

.490

.0095

4.3

.030-.059

.060-.089

Note 1: Add or subtract .030 to grip values per dash number increase or decrease

SK203 Foating Receptacle - Adjustable Depth Adjustable Depth Insert

Rivet/ Spacing

Grip(2)

Grip(2)

SK28S3-2

SK26S51-2

Cage

Insert

SK203C01

Stainless

Stainless

Bonded

.540

.0260

11.7

.020-.320

.020-.350

SK203C21

Stainless

Stainless

3/32x.75

.540

.0260

11.7

.020-.320

.020-.350

SK203C01A

Stainless

Aluminum

Bonded

.540

.0200

9.1

.020-.320

.020-.350

SK203C21A

Stainless

Aluminum

3/32x.75

.540

.0200

9.1

.020-.320

.020-.350

SK203A01A

Aluminum

Aluminum

Bonded

.540

.0180

8.16

.020-.320

.020-.350

SK203A21A

Aluminum

Aluminum

3/32x.75

.540

.0180

8.16

.020-.320

.020-.350

Note 2: Add or subtract .030 to grip values per dash number increase or decrease. Must have access to backside to adjust. Note 3: Height will increase when adjusted to thinner panels.

SK201T1 and SK203T1 Bond - Clamping Tool Secures and seals insert for bond setup and cure SK201T2 and SK203T2 Bond - Gummy Worm Secures and seals insert for bond setup and cure using traditional Gummy Worm - Reusable.

SK203T1 Shown

Skybolt Aeromotive Corp

Copyright 2017 Page 14

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 032416

Skybolt CLocÂŽ 2000 Series Threaded Receptacles SK210/230 Series Rivetless Receptacles - Adjustable Depth Excellent for any Non-Blind Mounting Application Ideal for Marine and Industrial Applications Adjustable Depth Use thread locking compound to secure insert

All series - In addition to the charted value of .476, allow up to .580 clearance to accomodate the stud nose through it full locking action travel.

Old Part#

SK209-31S SK210-30A SK210-30S SK210-31A SK210-31S SK210-32S SK230-16A* SK230-16S*

SK210-3S

Alum,Brass,Plastic

Steel,SS,Iron

Thread-Type

'W'

Drill Hole To(2)

Drill Hole To

Tap

Inner Panel

303 Stainless

3/8-24

.375

21/64

Q

3/8-24

.250 Min

6061 Aluminum

3/8-16

.375

9/32

5/16

Use with SK2000-150 or -312 Nutsert

303 Stainless

3/8-16

9/32 11/32

Use with SK2000-150 or -312 Nutsert

7/16-20

.375 .438

5/16

6061 Aluminum

25/64

7/16-20

.250 Min

303 Stainless

7/16-20

.438

11/32

25/64

7/16-20

.250 Min

303 Stainless

1/2-13

.496

15/32

27/64

1/2-13

.250 Min

6061 Aluminum

3/8-16 Ext Nose

.375

9/32

5/16

Use with SK2000-150 or -312 Nutsert

303 Stainless

3/8-16 Ext Nose

.375

9/32

5/16

Use with SK2000-150 or -312 Nutsert

Material

Minimum (1)

Notes: * Use SK or ZG2500 studs only. Lock threads with Locktite 271 Red (1) To allow full thread length. (2) undersized for tight threads.

Stud Grip Chart (Grip range increased based on insert setting)

SK28S3 Stainless Studs installed into SK210-31S Receptacles

Protruding

Outer Panel

Flush

Outer Panel

Stud (3)

Thickness

Stud (3)

Thickness

SK26S51-1 SK26S51-2 SK26S51-3 SK26S51-4 SK26S51-5 SK26S51-6 SK26S51-7 SK26S51-8 SK26S51-9 SK26S51-10 SK26S51-11

.075-.105

SK27S3-1S SK27S3-2S SK27S3-3S SK27S3-4S SK27S3-5S SK27S3-6S SK27S3-7S SK27S3-8S SK27S3-9S SK27S3-10S SK27S3-11S

.010-.019

.105-.135 .135-.165 .165-.195 .195-.225 .225-.255 .255-.285 .285-.315 .315-.345 .345-.375 .375-.405

.020-.049 .050-.079 .080-.109 .110-.139 .140-.169 .170-.199 .200-.229 .230-.259 .260-.289 .290-.319

(3) Charts also apply to all S K2600 Series and SK2700/2800 Series Studs.

Skybolt Aeromotive Corp

Copyright 2016 Page 15

Some Part#s Special Order Only Refer to www.skybolt .com for current revision

Rev 040616

Skybolt CLoc® 2000 Series Nutserts SK2000-150 and SK2000-312 Nutserts Excellent for any Blind or Non-Blind Mounting Application Ideal Industrial Applications Use thread locking compound to secure insert Use SK210-30S or SK230-16S Inserts - Patent Pending

SK2000-150

SK2000-312

L

Material

Body

L

Dia

Length

Grip

Hole Size

Flange Dia

L (Protrusion) Thickness

Installed (max)

SK2000-150 SK2000-150A SK2000-312

Steel-Yellow Zinc

17/32-9/16

.027-.150

.530

.690

.685

.035

.470

Aluminum

17/32-9/16

.027-.150 .150-.312

.035 .035

.470

17/32-9/16

.690 .805

.685

Steel-Yellow Zinc

.530 .530

SK2000-NST

Nutsert Installation Tool

.685

.425

Use 271 Red Locktite® to lock threads when properly adjusted. Warning: Thread lockers set up in approximately 5 minutes. 2600 Series: Adjust insert so that the face of the cup is flush with the bottom of the stud head. 2700/2800 Series: Set insert so that the stud head is no deeper than flush with the face of the cup. If insert is set to deep with the stud locked, you will not be able to unlock the stud after 5 minutes.

Stud Grip Chart - SK210-30 Insert Protruding

Outer Panel

Stud (4)

SK26S51-1 SK26S51-2 SK26S51-3 SK26S51-4 SK26S51-5 SK26S51-6 SK26S51-7 SK26S51-8 SK26S51-9 SK26S51-10 SK26S51-11

Stud Grip Chart - SK230-16 Insert

Flush

Outer Panel

Thickness

Stud (4)

.020-.300

SK27S3-1S SK27S3-2S SK27S3-3S SK27S3-4S SK27S3-5S SK27S3-6S SK27S3-7S SK27S3-8S SK27S3-9S SK27S3-10S SK27S3-11S

.020-.330 .130-.360 .160-.360 .190-.420 .220-.450 .250-.480 .280-.510 .310-.540 .340-.570 .370-.600

Protruding

Outer Panel

Thickness

Stud (4)

.020-.170

SK26S51-1 SK26S51-2 SK26S51-3 SK26S51-4 SK26S51-5 SK26S51-6 SK26S51-7 SK26S51-8 SK26S51-9 SK26S51-10 SK26S51-11

.020-.200 .020-.230 .100-.260 .130-.290 .160-.320 .190-.350 .220-.380 .250-.410 .280-.440 .310-.470

Flush

Outer Panel

Thickness

Stud (4)

Thickness

.390-.600

SK27S3-1S SK27S3-2S SK27S3-3S SK27S3-4S SK27S3-5S SK27S3-6S SK27S3-7S SK27S3-8S SK27S3-9S SK27S3-10S SK27S3-11S

.310-.470

.390-.630 .430-.660 .460-.690 .490-.720 .520-.750 .550-.780 .580-.810 .610-.840 .640-.870 .670-.900

.340-.500 .370-.530 .400-.560 .430-.590 .460-.620 .490-.650 .520-.680 .550-.710 .580-.740 .610-.770

(4) Charts also apply to all SK2600 Series and SK2700/2800 Series Studs.

Skybolt Aeromotive Corp

Copyright 2016 Page 16

Some Part#s Special Order Only Refer to www.skybolt .com for current revision

Rev 040616

Skybolt CLoc® 2000 Series Threaded Receptacles SK220 Series Rivetless Receptacles - Straight Flange Excellent for any Non-Blind Mounting Application Non-Adjustable Depth Use thread locking compound to secure nut SK220-1 Series (SK/ZG2500 Studs Only) .438

SK220-2 and SK220-3 Series

.094

SK220-1N Nut-(Steel)

Included

3/8-32

SK220-2N Nut-(Steel)

Included

W

W 15/32-32 for Nut (-2 Only) 1/2-13 for tap (-3 only) Min-Max

Replaces

SK220-1A (1) SK220-2A SK220-2S SK220-3S (2)

SK211-2S

Material

Thread-Type

'W'

Drill Hole To

Tap

Inner Panel

6061 Aluminum

3/8-32 with Backing Nut

6061 Aluminum

15/32-32 with Backing Nut

.370

3/8

NA

.010-.250

.472

15/32

NA

303 Stainless

.010-.250

15/32-32 with Backing Nut

.472

15/32

NA

303 Stainless

.010-.250

1/2-13 Tapped (No Backing Nut)

.500

13/32 (3)

1/2-13

.500 Min

(1) Min Total Thickness .045. (2) Course thread for tapped holes in wood/plasic/composite structures. (3) Drill Undersize.

SK220-1 Stud Grip Chart Protruding

Outer Panel

Flush

SK220-2 Stud Grip Chart Outer Panel

Protruding

Stud

Thickness

Stud

Thickness

Stud

SK25S51-1 SK25S51-2 SK25S51-3 SK25S51-4 SK25S51-5 SK25S51-6 SK25S51-7 SK25S51-8 SK25S51-9 SK25S51-10 SK25S51-11

.075-.104 .105-.134 .135-.164 .165-.194 .195-.224 .225-.254 .255-.284 .285-.314 .315-.344 .345-.374 .375-.404

SK25S3-1S SK25S3-2S SK25S3-3S SK25S3-4S SK25S3-5S SK25S3-6S SK25S3-7S SK25S3-8S SK25S3-9S SK25S3-10S SK25S3-11S

.045-.074 .075-.104 .105-.134 .135-.164 .165-.194 .195-.224 .225-.254 .255-.284 .285-.314 .315-.344 .345-.374

SK26S51-1 SK26S51-2 SK26S51-3 SK26S51-4 SK26S51-5 SK26S51-6 SK26S51-7 SK26S51-8 SK26S51-9 SK26S51-10 SK26S51-11

Skybolt Aeromotive Corp

Copyright 2016 Page 17

Outer Panel

Flush

Thickness

Stud

.030-.059 SK28S3-1S .060-.089 SK28S3-2S .090-.119 SK28S3-3S .120-.149 SK28S3-4S .150-.179 SK28S3-5S .180-.209 SK28S3-6S .210-.239 SK28S3-7S .240-.269 SK28S3-8S .270-.299 SK28S3-9S .300-.329 SK28S3-10S .330-.359 SK28S3-11S

Outer Panel Thickness

.010-.019 .020-.049 .050-.079 .080-.109 .110-.139 .140-.169 .170-.199 .200-.229 .230-.259 .260-.289 .290-.319

Some Part#s Special Order Only Refer to www.skybolt .com for current revision

Rev 040616

Skybolt CLocÂŽ 2000 Series Threaded Receptacles SK221 Series Rivetless Receptacles - Countersunk Flange Excellent for any Non-Blind Mounting Application Non-Adjustable Depth Use thread locking compound to secure nut .500 .160

.064

W W

15/32-32 for Nut 1/2-13 for Tap Min-Max Replaces

SK221-2A SK221-2S SK221-3S*

Material

'W'

Drill Hole To

Tap

Inner Panel

15/32-32 with Backing Nut

.472

15/32

NA

.090-.250

303 Stainless

15/32-32 with Backing Nut

.472

15/32

NA

.090-.250

303 Stainless

1/2-13 Tapped (No Backing Nut)

.500

13/32 (1)

1/2-13

.500 Min

SK211-32A 6061 Aluminum SK210-2S

Thread-Type

* Course thread for tapped holes in wood/plasic/composite structures

Stud Grip Chart

SK220-2N Nut- Steel - Bright Zinc Plated (Included with SK220-2 Series Receptacles)

Protruding

Outer Panel

Flush

Outer Panel

Stud

Thickness

Stud

Thickness

SK26S51-1 SK26S51-2 SK26S51-3 SK26S51-4 SK26S51-5 SK26S51-6 SK26S51-7 SK26S51-8 SK26S51-9 SK26S51-10 SK26S51-11

.030-.059 .060-.089 .090-.119 .120-.149 .150-.179 .180-.209 .210-.239 .240-.269 .270-.299 .300-.329 .330-.359

SK28S3-1S SK28S3-2S SK28S3-3S SK28S3-4S SK28S3-5S SK28S3-6S SK28S3-7S SK28S3-8S SK28S3-9S SK28S3-10S SK28S3-11S

.010-.019 .020-.049 .050-.079 .080-.109 .110-.139 .140-.169 .170-.199 .200-.229 .230-.259 .260-.289 .290-.319

Notes: (1) Drill slightly undersized for "tight" thread tap.

Skybolt Aeromotive Corp

Copyright 2016 Page 18

Some Part#s Special Order Only Refer to www.skybolt .com for current revision

Rev 040616

Skybolt ® MS21078 Platenuts Nylon Insert Platenuts - 6061 Aluminum - Steel Lightweight - Equivalent to Allmetal-Crimp Nuts Will not gall screw threads like allmetal platenuts Adds structure to panel Precision machined

Example Part #s MS21078-3 12L14 Steel ASTM A29, A108 - Yellow Zinc plate MS21078-3A 6061 T651 Aluminum ASTM B221-12 - No plating

Lbs MS21078

Marking

AN366

NAS1032

MS21078-04

4

NA

NAS1023N04

MS21078-06

6

AN366-F632A

MS21078-08

2 or 8

MS21078-3

3

MS21078-3-8

3

NA

NA

MS21078-324

Grams

Alum

Alum

#440 3/32 Rivets 11/16 Spacing 750 Axial Load

.0035

1.587

NAS1023N06

#632 3/32 Rivets 11/16 Spacing 1130 Axial Load

.0035

1.587

AN366-F832A

NAS1023N08

#832 3/32 Rivets 11/16 Spacing 1720 Axial Load

.0035

1.587

AN366-F1032A

NAS1023N3

#10-32 3/32 Rivets 11/16 Spacing 2460 Axial Load

.0035

1.587

#10-32 1/8 Rivets 11/16 Spacing 2460 Axial Load

.0035

1.587

34

#10-24 3/32 Rivets 11/16 Spacing 2460 Axial Load

.0035

1.587

MS21078-324-8

34

#10-24 1/8 Rivets 11/16 Spacing 2460 Axial Load

.0035

1.587

MS21078-420-8S

20

1/4-20 1/8 Rivets 11/16 Spacing(S) 4580 Axial Load

.0045

2.041

MS21078-420-8L

20

1/4-20 1/8 Rivets 1.00 Spacing(L) 4580 Axial Load

.0045

2.041

MS21078-428-L

28

AN366-F428A

NAS1023N4

1/4-28 3/32 Rivets 1.00 Spacing(L) 4580 Axial Load

.0055

2.041

MS21078-428-8S

28

NA

NA

1/4-28 1/8 Rivets 11/16 Spacing(S) 4580 Axial Load

.0055

2.041

.0055

2.041

NA

NA

MS21078-428-8L 28 NA NA 1/4-28 1/8 Rivets 1.00 Spacing(L) 4580 Axial Load Bold indicates normally stocked in steel. Shaded indicates normally stocked in aluminum.

Part#

A

B

H

D

MS21078-04

.970

.404

.215

.373

MS21078-06

.970

.404

.255

.373

MS21078-08

.970

.404

.285

.373

MS21078-3

.970

.404

.295

.373

MS21078-3-8

.970

.406

.295

.373

MS21078-324

.970

.406

.295

.373

MS21078-324-8

.970

.406

.295

.373

MS21078-420-8S

.970

.406

.295

.373

MS21078-420-8L

1.296

.516

.250

.465 .465

MS21078-428-L

1.296

.516

.250

MS21078-428-8S

.970

.406

.250

.465

MS21078-428-8L

1.296

.516

.250

.465

Skybolt Aeromotive Corp

Copyright 2016 Page 19

Some Part#s Special Order Only Refer to www.skybolt .com for current revision

Rev 101814

Skybolt CLoc® SK4000 and ZG4000 Series

4 - Piece Series (Stud/Retainer - Grommet - Locking Receptacle) 1050 LB Ultimate Tensile Strength (Steel and CLoc® Stainless) Designed to Exceed NASM5591 Table II Performance 1050 LB Ultimate Tensile Strength (ZG4000 Skytanium®) TSO-C148 Approved. SK215/245A will not meet NASM5591 endurance.

STUDS

3/8" Head Diameter - All Studs Note: Stud sizes thru -15 are self retaining in grommet. Studs require 4P3 Pliers to insert thru grommet.

40S5 Steel SK40S5-( )S Stainless 4002 Steel* SK4002-( )S Stainless (Collared Slot) ZG4002 ( ) Skytanium® (Collared Slot)

Stud Dash Number Stamped in Head

Use 4P3 Pliers to insert stud through grommet Panel (P) Drill to 15/32"

GROMMETS See Chart 1 for Specs

Standard Plus Flush Grommets

-orSee Chart 1 for Specs

Standard Flush Grommets

4002-( )W Steel SK4002-( )SW Stainless

SK-N2 Steel SK-N2S Stainless SK-N

Drill to 1/2"

Extended Depth

SK-O18

Steel

Grommets

SK-O316

Steel

Steel

SK-NS Stainless SK-O Steel SK-OS Stainless ZG-094 Skytanium® Panel (P) Drill to 15/32" (140deg Countersunk)) SK-G Steel SK-GS Stainless

SK-H SK-HS

SK-O14 SK-O18S SK-O316S SK-O14S

Steel Stainless Stainless Stainless

Steel Stainless

-orPanel (P) Drill to 15/32"

Grommet Retainers

See Chart 1 for Specs

Wide Flange Grommets

RECEPTACLES

SK-N3 SK-N3S SK-N316S ZG-094LA ZG-125LA ZG-187LA

Steel Stainless Stainless Skytanium® Skytanium® Skytanium®

R4G Grommet Retainer R4T High Shear Grommet Retainer SK-R531 Backing Washer (for Oversize Holes)

Use T26 Tool to install Retainers

Drill center hole to 5/8"

Support Panel (F)

Height = .5625" Rigid Receptacle 214-16 Steel 214-16D Dimpled SK215-4 Adjustable 1/8" Rivets

Skybolt Aeromotive Corp

Copyright 2014 Page 20

Floating Receptacle 244-16 Steel and Stainless 244-16D Dimpled SK244-161 Fixed SK245-161 Adjustable

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 040616

Skybolt CLoc® 4000 Series Common Sets Forget Charts - The followings assemblies solve 99% of all applications

SK40S5S ZG4002 Stainless Series SK40S5S-SET1

Total

Skytanium® Series ZG4002-SET1

Total

Grip Range

SK40S5-2S Phillips Head SK-OS Panel Grommet (.094 max thickness) SK-R4G Stud/Grommet Retainer SK245-4 Adjustable Receptacle 1/8” Rivets

.010 - .310

Grip Range

ZG4002-2 Collared Slot ZG-094LA Panel Grommet (.094 max thickness) SK-R4G Stud/Grommet Retainer SK245-4 Adjustable Receptacle 1/8” Rivets

.010 - .310

Note (1) Note (2)

Note 1 - OS Grommet Restrictions - Max Outer Panel Thickness = .094 Note 2 - See Dimension 'B' and 'C' below for minimum panel clearance and Overlap for SK245-4 Receptacle

What does Overlap Mean? Work from the Inner Panel Out (Choose receptacle then grommet), then determine location of pilot hole.

Pilot Hole Either B Minimum* = .311(G,H,N,O), .375(O94LA), .438(N3 Series) B

B Outer Panel C

C = Minimum Panel Overlap = A Minimum x 2 Recommended .500 + A Minimum

Inner Panel A

A

Either A Minimum* = .355 (SK214/SK215 Series Receptacle) - or .434 (SK244/SK245 Series Receptacle) *Minimums reflect part dimensions in a perfect world installation.

Installation Tools 4P3-T26 Tools Tools to install studs through grommets and install grommet retainers SK4DJ Flex Handle Drill Jig to drill rivet holes with #30 Drill Template-245 Template to expand center hole with Unibit-3 Stepdrill

Skybolt Aeromotive Corp

Copyright 2017 Page 21

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 101616

Skybolt CLoc® SK4002, ZG4002 Series Stainless and Skytanium ® Collared Slot 4 - Piece Series (Stud/Retainer - Grommet - Locking Receptacle) Industry Standard Heavy Duty 1/4-Turn Panel Fastener Series TSO-C148 Approved. Designed to Exceed NASM5591 Table II Performance Tensile/Shear Loads of 700 LBS Working - 1050 Lbs Ultimate

SK4002-[ ]S Collared Slot SK4002-[ ]S45 Phillips Head 700°F ZG4002-[ ] Skytanium® Grip SK214/40R17 Series(1)

(2) (2) (2) (2) (2)

Grip SK215 and SK245 Series

Stainless

Stainless

Skytanium®

Fixed Depth

Collared

Collared

Collared

Receptacle

Receptacle

Slot

Slot 700°F

Slot

Total

Combined Panel

Combined Panel

4002/4002S Series 40S41S Series 1142002 Series SK4002-2S SK4002-3S SK4002-4S SK4002-5S SK4002-6S SK4002-7S SK4002-8S SK4002-9S SK4002-10S SK4002-11S SK4002-12S SK4002-13S SK4002-14S SK4002-15S SK4002-16S SK4002-17S SK4002-18S SK4002-19S SK4002-20S

40S45 Series

ZG4002-2 ZG4002-3 ZG4002-4 ZG4002-5 ZG4002-6 ZG4002-7 ZG4002-8 ZG4002-9 ZG4002-10 ZG4002-11 ZG4002-12 ZG4002-13 ZG4002-14 ZG4002-15 ZG4002-16 ZG4002-17 ZG4002-18 ZG4002-19 ZG4002-20

Stud Length L Decimal mm .680 17.27 .710 18.03 .740 18.80 .770 19.56 .800 20.32 .830 21.08 .860 21.84 .890 22.61 .920 23.37 .950 24.13 .980 24.89 1.010 25.65 1.040 26.42 1.070 27.18 1.100 27.94 1.130 28.70 1.160 29.46 1.190 30.23 1.220 30.99

1142024 Series SK4002-2S45 SK4002-3S45 SK4002-4S45 SK4002-5S45 SK4002-6S45 SK4002-7S45 SK4002-8S45 SK4002-9S45 SK4002-10S45 SK4002-11S45 SK4002-12S45 SK4002-13S45 SK4002-14S45 SK4002-15S45 SK4002-16S45 SK4002-17S45 SK4002-18S45 SK4002-19S45 SK4002-20S45

Thickness Decimal Min Max .081 .110 .111 .140 .141 .170 .171 .200 .200 .230 .231 .260 .261 .290 .291 .320 .321 .350 .351 .380 .381 .410 .411 .440 .441 .470 .471 .500 .501 .530 .531 .560 .561 .590 .591 .620 .621 .650

Thickness Millimeter Min Max 2.06 2.79 2.82 3.56 3.58 4.32 4.34 5.08 5.08 5.84 5.87 6.60 6.63 7.37 7.39 8.13 8.15 8.89 8.92 9.65 9.68 10.41 10.44 11.18 11.20 11.94 11.96 12.70 12.73 13.46 13.49 14.22 14.25 14.99 15.01 15.75 15.77 16.51

Adjustable Depth

Thickness Decimal Min .010 .040 .070 .100 .130 .160 .190 .220 .250 .280 .310 .340 .370 .400 .430 .460 .490 .520 .550

Max .310 .340 .370 .400 .430 .460 .490 .520 .550 .580 .610 .640 .670 .700 .730 .760 .790 .820 .850

Thickness Millimeter Min Max 0.25 7.87 1.02 8.64 1.78 9.40 2.54 10.16 3.30 10.92 4.06 11.68 4.83 12.45 5.59 13.21 6.35 13.97 7.11 14.73 7.87 15.49 8.64 16.26 9.40 17.02 10.16 17.78 10.92 18.54 11.68 19.30 12.45 20.07 13.21 20.83 13.97 21.59

(1) For 244/SK244 Floating Series add .030 to grip (cage base). Example: For 244/SK244 floting receptacles, grip is .150, charted stud is -4, select a -5 stud.

(2) Skybolt studs do not require retainers. Note: Skybolt SK4002/40S5 stud lengths are the same. For longer lengths, add .030 to decimal values.

Skybolt Aeromotive Corp

Copyright 2016 Page 22

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 101616

Skybolt CLoc® SK40S5, SK40S45 Series Stainless Phillips Diamondhead ® 4 - Piece Series (Stud/Retainer - Grommet - Locking Receptacle) Industry Standard Heavy Duty 1/4-Turn Panel Fastener Series TSO-C148 Approved. Designed to Exceed NASM5591 Table II Performance Tensile/Shear Loads of 700 LBS Working - 1050 Lbs Ultimate

SK40S5-[ ]S Phillips Head - Hardened Diamondhead® SK40S5-[ ]S45 Phillips Head 700°F - Hardened Diamondhead®

Grip Stainless

(2) (2) (2) (2) (2)

Grip

Stainless

SK214/40R17 Series(1)

Phillips

Phillips

Fixed Depth

Head

Head 700°F

Receptacle

Receptacle

40S5/40S5S Series

40S45B Series

Total

Combined Panel

Combined Panel

SK40S5-2S45 SK40S5-3S45 SK40S5-4S45 SK40S5-5S45 SK40S5-6S45 SK40S5-7S45 SK40S5-8S45 SK40S5-9S45 SK40S5-10S45 SK40S5-11S45 SK40S5-12S45 SK40S5-13S45 SK40S5-14S45 SK40S5-15S45 SK40S5-16S45 SK40S5-17S45 SK40S5-18S45 SK40S5-19S45 SK40S5-20S45

Stud Length L Decimal mm .680 17.27 .710 18.03 .740 18.80 .770 19.56 .800 20.32 .830 21.08 .860 21.84 .890 22.61 .920 23.37 .950 24.13 .980 24.89 1.010 25.65 1.040 26.42 1.070 27.18 1.100 27.94 1.130 28.70 1.160 29.46 1.190 30.23 1.220 30.99

40S41SC Series 1142012 Series 1142026 Series SK40S5-2S SK40S5-3S SK40S5-4S SK40S5-5S SK40S5-6S SK40S5-7S SK40S5-8S SK40S5-9S SK40S5-10S SK40S5-11S SK40S5-12S SK40S5-13S SK40S5-14S SK40S5-15S SK40S5-16S SK40S5-17S SK40S5-18S SK40S5-19S SK40S5-20S

Thickness Decimal Min Max .081 .110 .111 .140 .141 .170 .171 .200 .200 .230 .231 .260 .261 .290 .291 .320 .321 .350 .351 .380 .381 .410 .411 .440 .441 .470 .471 .500 .501 .530 .531 .560 .561 .590 .591 .620 .621 .650

Thickness Millimeter Min Max 2.06 2.79 2.82 3.56 3.58 4.32 4.34 5.08 5.08 5.84 5.87 6.60 6.63 7.37 7.39 8.13 8.15 8.89 8.92 9.65 9.68 10.41 10.44 11.18 11.20 11.94 11.96 12.70 12.73 13.46 13.49 14.22 14.25 14.99 15.01 15.75 15.77 16.51

SK215 and SK245 Series Adjustable Depth

Thickness Decimal Min .010 .040 .070 .100 .130 .160 .190 .220 .250 .280 .310 .340 .370 .400 .430 .460 .490 .520 .550

Max .310 .340 .370 .400 .430 .460 .490 .520 .550 .580 .610 .640 .670 .700 .730 .760 .790 .820 .850

Thickness Millimeter Min Max 0.25 7.87 1.02 8.64 1.78 9.40 2.54 10.16 3.30 10.92 4.06 11.68 4.83 12.45 5.59 13.21 6.35 13.97 7.11 14.73 7.87 15.49 8.64 16.26 9.40 17.02 10.16 17.78 10.92 18.54 11.68 19.30 12.45 20.07 13.21 20.83 13.97 21.59

(1) For 244/SK244 Floating Series add .030 to grip (cage base). Example: For 244/SK244 floting receptacles, grip is .150, charted stud is -4, select a -5 stud.

(2) Skybolt studs do not require retainers. Note: Skybolt SK4002/40S5 stud lengths are the same. For longer lengths, add .030 to decimal values.

Skybolt Aeromotive Corp

Copyright 2016 Page 23

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 101616

Skybolt CLoc® SK4002SW, SK4002SR Series Stainless Wing and Folding Ring 4 - Piece Series (Stud/Retainer - Grommet - Locking Receptacle) Industry Standard Heavy Duty 1/4-Turn Panel Fastener Series TSO-C148 Approved. Designed to Exceed NASM5591 Table II Performance Tensile/Shear Loads of 700 LBS Working - 1050 Lbs Ultimate

SK4002SW Series

SK4002SR Series

Grip

Grip

SK214/40R17 Series(1)

SK215 and SK245 Series

Fixed Depth SK4002SW

SK4002SR

Winged

Folding Ring

4002SW Series

Receptacle

Receptacle

Stud Length

Combined Panel

Combined Panel

L SK4002SW

1142016 Series

Adjustable Depth

Total

Thickness SK4002SR

Decimal

Thickness

Thickness

Thickness

Millimeter

Decimal

Millimeter

inches

mm

inches

mm

Min

Max

Min

Max

Min

Max

Min

Max

SK4002-2SW

SK4002-2SR

.680

17.27

.835

21.21

.081

.110

2.06

2.79

.010

.310

0.25

7.87

SK4002-3SW

SK4002-3SR

.710

18.03

.865

21.97

.111

.140

2.82

3.56

.040

.340

1.02

8.64

SK4002-4SW

SK4002-4SR

.740

18.80

.895

22.73

.141

.170

3.58

4.32

.070

.370

1.78

9.40

SK4002-5SW

SK4002-5SR

.770

19.56

.925

23.50

.171

.200

4.34

5.08

.100

.400

2.54

10.16

SK4002-6SW

SK4002-6SR

.800

20.32

.955

24.26

.200

.230

5.08

5.84

.130

.430

3.30

10.92

SK4002-7SW

SK4002-7SR

.830

21.08

.985

25.02

.231

.260

5.87

6.60

.160

.460

4.06

11.68

SK4002-8SW

SK4002-8SR

.860

21.84

1.015

25.78

.261

.290

6.63

7.37

.190

.490

4.83

12.45

SK4002-9SW

SK4002-9SR

.890

22.61

1.045

26.54

.291

.320

7.39

8.13

.220

.520

5.59

13.21

SK4002-10SW

SK4002-10SR

.920

23.37

1.075

27.31

.321

.350

8.15

8.89

.250

.550

6.35

13.97

SK4002-11SW

SK4002-11SR

.950

24.13

1.105

28.07

.351

.380

8.92

9.65

.280

.580

7.11

14.73

SK4002-12SW

SK4002-12SR

.980

24.89

1.135

28.83

.381

.410

9.68

10.41

.310

.610

7.87

15.49

SK4002-13SW

SK4002-13SR

1.010

25.65

1.165

29.59

.411

.440

10.44

11.18

.340

.640

8.64

16.26

SK4002-14SW

SK4002-14SR

1.040

26.42

1.195

30.35

.441

.470

11.20

11.94

.370

.670

9.40

17.02

SK4002-15SW

SK4002-15SR

1.070

27.18

1.225

31.12

.471

.500

11.96

12.70

.400

.700

10.16

17.78

(2)

SK4002-16SW

SK4002-16SR

1.100

27.94

1.255

31.88

.501

.530

12.73

13.46

.430

.730

10.92

18.54

(2)

SK4002-17SW

SK4002-17SR

1.130

28.70

1.285

32.64

.531

.560

13.49

14.22

.460

.760

11.68

19.30

(2)

SK4002-18SW

SK4002-18SR

1.160

29.46

1.315

33.401

.561

.590

14.25

14.99

.490

.790

12.45

20.07

(2)

SK4002-19SW

SK4002-19SR

1.190

30.23

1.345

34.163

.591

.620

15.01

15.75

.520

.820

13.21

20.83

(2)

SK4002-20SW

SK4002-20SR

1.220

30.99

1.375

34.925

.621

.650

15.77

16.51

.550

.850

13.97

21.59

(1) For 244/SK244 Floating Series add .030 to grip (cage base). Example: For 244/SK244 floting receptacles, grip is .150, charted stud is -4, select a -5 stud.

(2) Skybolt studs do not require retainers. Note: Skybolt SK4002/40S5 stud lengths are the same. For longer lengths, add .030 to decimal values.

Skybolt Aeromotive Corp

Copyright 2016 Page 24

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 101616

Skybolt CLoc® SK4002 FW Series Stainless Folding Wing 4 - Piece Series (Stud/Retainer - Grommet - Locking Receptacle) Industry Standard Heavy Duty 1/4-Turn Panel Fastener Series SK 4000 Series TSO-C148 Approved. Designed to Exceed NASM5591 Table II Performance

TSO-C148 Pending

Tensile/Shear Loads of 700 LBS Working - 1050 Lbs Plus Ultimate

US Patent Pending

SK4002SFW Style Folding Wing

SK4001SFW Style Folding Wing

For all Dash#s A Decimal mm SK4002-(x)SFW 1.000 25.40 SK4001-(x)SFW 1.073 27.25 Note (1) B & D dimensions - Nominal locked position

B(1) Decimal mm 0.850 21.59 0.660 16.76

C Decimal 0.800 0.567

mm 20.32 14.40

D (1) Decimal mm 0.260 6.60 0.260 6.60

Note: 2600 Series Studs will not fit SK212-10 Series Receptacles. Use SK212-12 or SK213 Series Receptacle

Grip

Folding Wing SK4002FW Series Studs

Grip

SK214/40R17 Series(1)

SK215 and SK245 Series

Fixed Depth

Adjustable Depth

Receptacle Total Stud Length L Decimal mm

Receptacle

Combined Panel Thickness Thickness Decimal Millimeter Min Max Min Max

Combined Panel Thickness Thickness Decimal Millimeter Min Max Min Max

Stainless 4002SFW Series Folding Wing

Stainless 4002SFW Series Folding Wing

SK4002-2SFW

SK4001-2SFW

0.920

23.37

.081

.110

2.06

2.79

.010

.310

0.25

7.87

SK4002-3SFW

SK4001-3SFW

0.950

24.13

.111

.140

2.82

3.56

.040

.340

1.02

8.64

SK4002-4SFW

SK4001-4SFW

0.980

24.89

.141

.170

3.58

4.32

.070

.370

1.78

9.40

SK4002-5SFW

SK4001-5SFW

1.010

25.65

.171

.200

4.34

5.08

.100

.400

2.54

10.16

SK4002-6SFW

SK4001-6SFW

1.040

26.42

.200

.230

5.08

5.84

.130

.430

3.30

10.92

SK4002-7SFW

SK4001-7SFW

1.070

27.18

.231

.260

5.87

6.60

.160

.460

4.06

11.68

SK4002-8SFW

SK4001-8SFW

1.100

27.94

.261

.290

6.63

7.37

.190

.490

4.83

12.45

SK4002-9SFW

SK4001-9SFW

1.130

28.70

.291

.320

7.39

8.13

.220

.520

5.59

13.21

SK4002-10SFW

SK4001-10SFW

1.160

29.46

.321

.350

8.15

8.89

.250

.550

6.35

13.97

SK4002-11SFW

SK4001-11SFW

1.190

30.23

.351

.380

8.92

9.65

.280

.580

7.11

14.73

SK4002-12SFW

SK4001-12SFW

1.220

30.99

.381

.410

9.68

10.41

.310

.610

7.87

15.49

SK4002-13SFW

SK4001-13SFW

1.250

31.75

.411

.440

10.44

11.18

.340

.640

8.64

16.26

SK4002-14SFW

SK4001-14SFW

1.280

32.51

.441

.470

11.20

11.94

.370

.670

9.40

17.02

SK4002-15SFW

SK4001-15SFW

1.310

33.27

.471

.500

11.96

12.70

.400

.700

10.16

17.78

(2)

SK4002-16SFW

SK4001-16SFW

1.340

34.04

.501

.530

12.73

13.46

.430

.730

10.92

18.54

(2)

SK4002-17SFW

SK4001-17SFW

1.370

34.80

.531

.560

13.49

14.22

.460

.760

11.68

19.30

(2)

SK4002-18SFW

SK4001-18SFW

1.400

35.56

.561

.590

14.25

14.99

.490

.790

12.45

20.07

(2)

SK4002-19SFW

SK4001-19SFW

1.430

36.32

.591

.560

15.01

14.22

.520

.820

13.21

20.83

(2)

SK4002-20SFW

SK4001-20SFW

1.460

37.08

.621

.590

15.77

14.99

.550

.850

13.97

21.59

(1) For 244/SK244 Floating Series add .030 to grip (cage base). Example: For 244/SK244 floting receptacles, grip is .150, charted stud is -4, select a -5 stud.

(2) Skybolt studs do not require retainers. Note: Skybolt SK4002/40S5 stud lengths are the same. For longer lengths, add .030 to decimal values.

Skybolt Aeromotive Corp

Copyright 2016 Page 25

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

101616

Skybolt CLoc® 4000 Series Stud Weights SK4002

Skytanium®

SK40S5 -0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15

Lbs .0090 .0090 .0095 .0100 .0105 .0110 .0120 .0130 .0135 .0140 .0150 .0155 .0165 .0170 .0175 .0185

Grams 4.0823 4.0823 4.3091 4.5359 4.7627 4.9895 5.4431 5.8967 6.1235 6.3503 6.8039 7.0307 7.4843 7.7111 7.9379 8.3915

SK4002W

Lbs

Grams

6.5771 7.0307 7.2575 7.4843 7.9379 8.3915 8.6183 8.8451 9.2986 9.5254 9.9790 10.2058 10.4326 10.8862

ZG4002 -0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15

Lbs 0.0045 0.0045 0.0045 0.0047 0.0050 0.0055 0.0060 0.0065 0.0067 0.0069 0.0074 0.0077 0.0082 0.0084 0.0087 0.0092

Grams 2.0263 2.0263 2.0414 2.1321 2.2682 2.4950 2.7219 2.9487 3.0394 3.1520 3.3772 3.4897 3.7149 3.8275 3.9400 4.1652

-2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15

0.0145 0.0155 0.0160 0.0165 0.0175 0.0185 0.0190 0.0195 0.0205 0.0210 0.0220 0.0225 0.0230 0.0240

-16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 -31 -32 -33 -34 -35 -36 -37 -38 -39 -40 -41 -42 -43 -44 -45 -46 -47 -48 -49 -50

.0130 .0132 .0135 .0137 .0139 .0142 .0144 .0146 .0149 .0151 .0153 .0156 .0158 .0160 .0162 .0165 .0168 .0170 .0172 .0175 .0177 .0179 .0182 .0184 .0186 .0189 .0191 .0193 .0196 .0198 .0200 .0203 .0205 .0208 .0210

5.8967 5.9874 6.1235 6.2142 6.3049 6.4410 6.5317 6.6224 6.7585 6.8492 6.9400 7.0760 7.1668 7.2575 7.3482 7.4843 7.6204 7.7111 7.8018 7.9379 8.0286 8.1193 8.2554 8.3461 8.4368 8.5729 8.6636 8.7543 8.8904 8.9811 9.0718 9.2079 9.2986 9.4347 9.5254

-16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 -31 -32 -33 -34 -35 -36 -37 -38 -39 -40 -41 -42 -43 -44 -45 -46 -47 -48 -49 -50

0.0185 0.0187 0.0190 0.0192 0.0194 0.0197 0.0199 0.0201 0.0204 0.0206 0.0208 0.0211 0.0213 0.0215 0.0217 0.0220 0.0223 0.0225 0.0227 0.0230 0.0232 0.0234 0.0237 0.0239 0.0241 0.0244 0.0246 0.0248 0.0251 0.0253 0.0255 0.0258 0.0260 0.0263 0.0265

8.3915 8.4822 8.6183 8.7090 8.7997 8.9358 9.0265 9.1172 9.2533 9.3440 9.4347 9.5708 9.6615 9.7522 9.8430 9.9790 10.1151 10.2058 10.2965 10.4326 10.5233 10.6141 10.7501 10.8409 10.9316 11.0677 11.1584 11.2491 11.3852 11.4759 11.5666 11.7027 11.7934 11.9295 12.0202

-16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 -31 -32 -33 -34 -35 -36 -37 -38 -39 -40 -41 -42 -43 -44 -45 -46 -47 -48 -49 -50

0.0065 0.0066 0.0067 0.0068 0.0069 0.0070 0.0072 0.0073 0.0074 0.0075 0.0076 0.0077 0.0079 0.0080 0.0081 0.0082 0.0083 0.0084 0.0086 0.0087 0.0088 0.0089 0.0090 0.0091 0.0093 0.0094 0.0095 0.0096 0.0097 0.0098 0.0100 0.0101 0.0102 0.0103 0.0104

2.9269 2.9798 3.0327 3.0856 3.1385 3.1914 3.2443 3.2972 3.3501 3.4031 3.4560 3.5089 3.5618 3.6147 3.6676 3.7205 3.7734 3.8263 3.8792 3.9321 3.9851 4.0380 4.0909 4.1438 4.1967 4.2496 4.3025 4.3554 4.4083 4.4612 4.5141 4.5671 4.6200 4.6729 4.7258

Note: Skybolt studs -16 and longer do not require retainers.

Weights are for Steel and Stainless or Skytanium as noted.

Skybolt Aeromotive Corp

Copyright 2016 Page 26

Some Part#s Special Order Only Refer wo www.skybolt.com for current revision

Rev 121916

Skybolt CLoc速 SK4000 Series Flush Grommets Standard Grommets (For Panels up to .117)

TSO-C148

'G' Series - Panels to .074 Thickness Replace AirlocII 1142900-1 Replace AirlocII 1142904-1

'H' Series - Panels to .117 Thickness Replace AirlocII 1142900-2 Replace AirlocII 1142904-2

SK40G1 High Shear Series Replace AirlocII 1142909

Flush Grommets require 140 countersunk panels. Standard flush grommets are available in two thickness ranges, G for panels up to .074, and H for panels up to .117 in thickness. Many production aircraft installations used Flush Grommets.

Engineering Data for Flush Series CLoc速 Grommets (Chart 1) Steel Grommet# SK-G SK40G1-5 SK40G1-8 SK-H

Stainless Grommet# SK-GS SK40G1-5S SK40G1-8S SK-HS

A .065 .092

B .066 .066

A .065 .092

B .066 .066

Type

Material

Flush Flush - High Shear Flush - High Shear Flush

Steel Steel Steel Steel

TSO-C148 Type

Material

Flush Flush - High Shear Flush - High Shear Flush

Stainless Stainless Stainless Stainless

Panel Depth Range R4G R4T Snap Ring Snap Ring Up to .074 Up to .065 Up to .092 Up to .117

Up to .058 Up to .051 Up to .051 Up to .101

Panel Depth Range R4G R4T Snap Ring Snap Ring Up to .074 Up to .065 Up to .092 Up to .117

Up to .058 Up to .051 Up to .078 Up to .101

Minimum Total Thickness* SK214-16A SK215 SK244-16 Rec SK245* Rec

Skybolt CLoc速 components have no minimum restriction Minimum Total Thickness* SK214-16A SK215 SK244-16 Rec SK245* Rec

Skybolt CLoc速 components have no minimum restriction

*Industry standard components will jam inside receptacle with minimum thickness applications. Skybolt eliminated this restriction.

Skybolt Aeromotive Corp

Copyright 2017 Page 27

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 121916

Skybolt CLoc® SK4000 Series PlusFlush Grommets Standard Grommets (For Panels up to .094) Extended Depth Grommets (For Panels .094 to .566)

TSO-C148

SK-N Series Replace AirlocII 1142901-2 Replace AirlocII 1142903-2

SK-N2 Series Replace AirlocII 1142901-1 Replace AirlocII 1142903-1

SK and ZG Extended Series

L

O

SK-O Series Replace AirlocII 1142901-3 Replace AirlocII 1142903-3

Skybolt N and O Series Grommets do not require dimpled or countersunk holes . These grommets, however, are almost flush (Plus Flush) so that drag considerations are minor. Traditional snap ring grommets are restricted in depth by the clearances required to insert the studs through the grommet. The SK-O Extended Depth Grommets utilize a milled slot in the grommet skirt to allow any stud to be easily inserted or removed while extending the grip range of the grommet. This is especially useful for thicker panels up through 1/2". The SK-O Extended Depth Grommet eliminates the requirement to back-counterbore holes in order to install R4G Retainers. This Grommet is the perfect substitution for expensive Flare Retained Grommets

Engineering Data for CLoc® Grommets Plus Flush (Chart 2) Steel Grommet# SK-N2 SK-N SK-O SK-O18 SK-316 SK-014

Stainless Grommet# SK-N2S SK-NS SK-OS SK-OSG1-8 SK-O18S SK-316S SK-O14S SK-O12S

R4T Snap Ring Up to .011 Up to .063 .050 to .083 .079 to .130 .131 to .200 .201 to .260

Material Steel Stainless Stainless Stainless Stainless Stainless Stainless Stainless

Panel Depth Range R4G Snap Ring Up to .025 Up to .079 .066 to .094 .066 to .094 .095 to .150 .180 to .213 .221 to .280 .281 to .566

R4T Snap Ring Up to .011 Up to .063 .050 to .083 .050 to .083 .079 to .134 .164 to .197 .205 to .264 .265 to .550

Type

Material

Panel Depth Range R4G Snap Ring

R4T Snap Ring

Minimum Total Thickness* SK214-16A SK215 SK244-16 Rec SK245* Rec

Plus Flush

Skytanium

.066 to .094

.050 to .078

No minimum

'L' .184/4.68mm .197/5.00 .197/5.00 .265/6.73mm .352/8.94 .428/10.87

Type Standard Standard Standard Ext Depth Ext Depth Ext Depth

'L' .184/4.68mm .197/5.00 .197/5.00 .197/5.00 .265/6.73 .352/8.94 .42810.87 .680/17.27

TSO-C148 Type Standard Standard Standard High Shear Ext Depth Ext Depth Ext Depth Ext Depth

Skytanium® Grommet# ZG-094

Material Steel Steel Steel Steel Steel Steel

Panel Depth Range R4G Snap Ring Up to .025 Up to .079 .066 to .094 .095 to .150 .151 to .220 .221 to .280

'L' .197

Minimum Total Thickness* SK214-16A SK215 SK244-16 Rec SK245* Rec Skybolt CLoc® components have no minimum restriction .050 .135 .215

.000-.280 .150-.260 .220-.310

Minimum Total Thickness* SK214-16A SK215 SK244-16 Rec SK245* Rec Skybolt CLoc® components have no

.050 .135 .215 .480

.000-.280 .150-.260 .220-.310 .460-.590

*Lesser thickness allows grommet to jam against inside of receptacle when fastener is locked. SK245-4 Rev B

Skybolt Aeromotive Corp

Copyright 2017 Page 28

Some Parts#s Special Order Only Refer to www.skybolt.com for current revision

Rev 121916

Skybolt CLoc速 SKN4 and SK-N114 Series Grommets Wide Flange (.750) Grommets (For Panel Thickness up to .135)*

TSO-C148

.750

SKN4 Series (Taper Head)

SK-N114 Series (Flat Head) Replace AirlocII 114295-4

The Skybolt SKN4 and SK-114 Grommets are the perfect balance between traditional grommet head size and the large area SK-N3 grommets. Ideal for "workhorse" aircraft panels. Common to Ag Aircraft.

Notes: *When used with SK-R4GS retainers Grip is less with SK-R4TS retainers. Charted grip ranges are conservative.

Engineering Data for CLoc速 Grommets Plus Flush (Chart 2) SKN4 Series - Taper Face Grommet# 'L' Type

Material

Weight lb/g

SKN4-2 SKN4-3 SKN4-4 SKN4-2S SKN4-3S SKN4-4S

Steel Steel Steel Stainless Stainless Stainless

.0060/2.7 .0060/2.7 .0070/3.2 .0060/2.7 .0060/2.7 .0070/3.2

.205/5.207 .205/5.207 .241/6.121 .205/5.207 .205/5.207 .241/6.121

Taper Plus Flush Taper Pluh Flush Taper Plus Flush Taper Plus Flush Taper Plush Flush Taper Plus Flush

SK-N114 - Flat Face Grommet# 'L'

Type

Material

Weight lb/g

SK-N114-2 SK-N114-3 SK-N114-4 SK-N114-2S SK-N114-3S SK-N114-4S

Flat Head Plus Flush Flat Head Pluh Flush Flat Head Plus Flush Flat Head Plus Flush Flat Head Plus Flush Flat Head Plus Flush

Steel Steel Steel Stainless Stainless Stainless

.0060/2.7 .0060/2.7 .0070/3.2 .0060/2.7 .0060/2.7 .0070/3.2

.205/5.207 .205/5.207 .241/6.121 .205/5.207 .205/5.207 .241/6.121

Panel Depth Range R4G R4T Snap Ring Snap Ring Up to .065 Up to .094 Up to .135 Up to .065 Up to .094 Up to .135

Up to .053 Up to .078 Up to .113 Up to .053 Up to .078 Up to .113

Panel Depth Range R4G R4T Snap Ring Snap Ring Up to .065 Up to .094 Up to .135 Up to .065 Up to .094 Up to .135

Up to .053 Up to .078 Up to .113 Up to .053 Up to .078 Up to .113

Minimum Total Thickness* SK214-16A SK215 SK244-16 Rec SK245* Rec

Skybolt CLoc速 components have no minimum restriction

Minimum Total Thickness* SK214-16A SK215 SK244-16 Rec SK245* Rec

Skybolt CLoc速 components have no minimum restriction

*Lesser thickness allows grommet to jam against inside of receptacle when fastener is locked. SK245-4 Rev B and subsequent have no restriction

Skybolt Aeromotive Corp

Copyright 2017 Page 28a

Some Parts#s Special Order Only Refer to www.skybolt.com for current revision

Rev 121916

Skybolt CLoc® SK4000 Series Large Area Grommets and Extended Depth Grommets (For panels from .065 to .546) TSO-C148

SK-N3 Series Replace AirlocII 1142931

SK-N318 Series ZG-LA Series Skybolt N and O Series Grommets do not require dimpled or countersunk holes . These grommets, however, are almost flush (Plus Flush) so that drag considerations are minor. Traditional snap ring grommets are restricted in depth by the clearances required to insert the studs through the grommet. The SK-O Extended Depth Grommets utilize a milled slot in the grommet skirt to allow any stud to be easily inserted or removed while extending the grip range of the grommet. This is especially useful for thicker panels up through 1/4". The SK-O Extended Depth Grommet eliminates the requirement to back-counterbore holes in order to install R4G Retainers. This Grommet is the perfect substitution for expensive Flare Retained Grommets

Engineering Data for CLoc® Grommets Plus Flush (Chart 3) Steel Grommet# SK-N3 SK-N318

Stainless Grommet# SK-N3S SK-N318S SK-N314S SK-N312S

Skytanium® Grommet# ZG-094LA ZG-125LA ZG-187LA ZG-250LA

TSO-C148 'W'/mm .875/22.23mm .875/22.23 TSO-C148 'W'/mm .875/22.23 .875/22.23 .875/22.23 .875/22.23

'W'/mm .750/19.05mm .750/19.05 .750/19.05 .750/19.05

'L'/mm .200/5.08mm .265/6.73

'L'/mm .200/5.08 .265/6.73 .428/10.87 .680/17.27

'L'/mm .200/5.08 .265/6.73 .352/8.94 .428/10.87

Weight .0075/3.3g .0070/3.2

Weight .0075/3.3 .0070/3.2 .0019/4.5 .0135/6.0

Weight .0015/.7g .0020/.9 .0025/1.1 .0030/1.3

Material Steel Steel

Panel Depth Range R4G R4T Snap Ring Snap Ring Up to .079 Up to .063 Up to .159 Up to .143

Minimum Total Thickness* SK214-16A SK215 SK244-16 Rec SK245* Rec .000 .000-.190 .050 .000-.280

Material Stainless Stainless Stainless Stainless

Panel Depth Range R4G R4T Snap Ring Snap Ring Up to .079 Up to .063 Up to .159 Up to .143 Up to .296 Up to .280 Up to .546 Up to .530

Minimum Total Thickness* SK214-16A SK215 SK244-16 Rec SK245* Rec .000 .000-.190 .050 .000-.280 .215 .220-.310 .480 .410-.720

Material Skytanium Skytanium Skytanium Skytanium

Panel Depth Range R4G R4T Snap Ring Snap Ring .066 to .094 .050 to .078 .095 to .150 .079 to .130 .180 to .213 .164 to .197 .221 to .280 .201 to .260

Minimum Total Thickness* SK214-16A SK215 SK244-16 Rec SK245* Rec No minimum .050 .000-.280 .135 .150-.300 .215 .220-.310

*Lesser thickness allows grommet to jam against inside of receptacle when fastener is locked. SK-N3 length/grip differ from Camloc.

Minimum Total Thickness (No minimum) applies to Skybolt CLoc receptacles only. Higher minimums apply to Camloc.

Skybolt Aeromotive Corp

Copyright 2017 Page 29

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 121916

Skybolt CLocÂŽ SK4000 and ZG4000 Series Grommet Retainers TSO-C148 .038 - .041

.053 - .057

.430

SK-R4G Steel SK-R4GS Stainless

SK-R4T Steel SK-R4TS Stainless

(40G26-1) or 1142905

Note: Industry standard R4T parts have an ID tolerance of .428 - .458.

Install with SK-T26 -or- SK-SP5 Tools

Oversize or Worn Holes?

Simple solution to big problems. Simply insert over grommet skirt, install standard retainer, the hole is filled and the fastener assembly remains captive.

SK-R560 Series Grommet Backing Washer Use with standard grommets and retainer Part# SK-R560

Min Hole Dia

Max Hole Dia

.530

.600

Common Panel Configurations A

B Outer Panel

Inne r Gasket Material

C

Skybolt Aeromotive Corp

D

Copyright 2017 Page 30

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 110816

Skybolt CLoc® SK4000 Series Non-Adjusting - Fixed Depth Receptacles NASM5591 Performance Rated (unless noted) TSO-C148 Approved

SK214 Steel/Stainless -and- SK40R17 Stainless Light Weight - Non Floating Series

SK214-16

Camloc

Airloc II

Part#

Part#

Material

Finish

Steel

Zinc

214-16

1142700

NASM5591

NASM5591

None

None

Alum6061

None

214-16S

1142710

Stainless

Passivated

NASM5591

NASM5591

NASM5591

SK214-16SD

214-16SD

1142711

Stainless

Passivated

NASM5591

NASM5591

NASM5591

Countersunk

SK214-16SENC

40R12-1S

NASM5591

SK214-16A(1) Note 1

SK214-16S

Stainless

Passivated

Encapsulated

NASM5591

SK40R17-1

40R17-1

NASM5591

NASM5591

SK40R17-2

40R17-2

NASM5591

NASM5591

1142714(1)

Stainless

Electropolish

1142715(1)

Stainless

Electropolish

Dimpled

A

B

C

D

E

F

Weight

dec/mm

dec/mm

frac/mm

dec/mm

dec/mm

dec/mm

Lb/Grams .0170lb

1.000

0.715

1/8

1.375

0.520

0.063

25.400

18.161

3.251

34.925

3.251

3.251

7.7g

1.000

0.715

1/8

1.375

0.520

0.073

.0060lb

25.400

18.161

3.251

34.925

3.251

3.251

2.8g

1.000

0.715

1/8

1.375

0.490

0.063

.0160lb

25.400

18.161

3.251

34.925

3.251

3.251

7.2g

1.000

0.715

1/8 Csk

1.375

0.490

0.063

.0165lb

25.400

18.161

3.251 Csk

34.925

3.251

3.251

7.5g

1.000

0.715

1/8

1.375

0.700

0.063

.0255lb

25.400

18.161

3.251

34.925

17.780

3.251

6.48g

1.000

0.695

1/8

1.375

0.520

0.045

.0120lb

25.400

17.653

3.251

34.925

3.251

3.251

5.4g

1.000

0.695

1/8 Dimp

1.375

0.520

0.045

.0120lb

25.400

17.653

3.251 Dimp

34.925

3.251

3.251

5.4g

Note (1) SK214-16A meets NASM5591 Tensile/Shear, cycle limited to 3500.

SK244-161 Floating Series Skybolt Part# SK244A161S NASM5591

SK244A161A

SK244-16 Floating Series (Camloc Cage)

Revised Part# SK244-16

Camloc Part# 244-16

Airloc Part# 1142706

Insert Material Steel

Cage Material Alum

NASM5591

NASM5591

NASM5591

SK244-16A

None

None

Aluminum

Alum

244-16S

1142717

Stainless

Stainless

NASM5591

NASM5591

Stainless

Stainless

Note 1

SK244C161C

None

NASM5591

SK244C16C

None

NASM5591

244-16S

1142717

NASM5591

NASM5591

A dec/mm 1.000 25.400 1.000 25.400 1.000 25.400 1.000 25.400

B dec/mm 0.865 21.971 0.865 21.971 0.865 21.971 0.865 21.971

C frac/mm 1/8 3.251 1/8 3.251 1/8 3.251 1/8 3.251

D dec/mm 1.375 34.925 1.375 34.925 1.375 34.925 1.375 34.925

E dec/mm 0.560 14.224 0.560 14.224 0.560 14.224 0.560 14.224

Weight Lb/Grams .0235lb 10.659g .0115lb 5.216g .0235lb 10.659g .0225lb 10.206g

Maximum NASM25027 Push-Out Rating for platenuts is 125 lbs. SK244-161 tested to 130 lbs push-out.

Skybolt Aeromotive Corp

Copyright 2016 Page 31

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Skybolt CLocÂŽ SK4000 Adjustable Non-Floating Series

Rev 061917

Dash 4 and Dash 7 Series Adjustable Receptacles TSO-C148 4 - Piece Series (Stud/Retainer - Grommet - Locking Receptacle)

SK215-4 Series Non-Floating (External Locking)

SK215-7ENC Series Non-Floating Encapsulated (Internal Locking)

Insert depth easily adjusts in .015 incriments. One fastener (stud) length covers a total thickness range of .300 or 10 dash#s (part#s) eliminating expensive inventory. Unlimited adjustment, even without removing the panel (Dash 5). Great for Pre-Load applications.

Adjustable - Non-Floating - Receptacle Skybolt

Insert

A

B

C

D

E

F

Weight

Part#

Material

dec/mm

dec/mm

frac/mm

dec/mm

dec/mm

dec/mm

Lb/Grams

SK215-4

6061/7075

Rivet - Straight Holes SK215-4D

6061/7075

Rivet - Csk Holes SK215-4S

303/303

Rivet - Straight Holes SK215-4SD

303/303

Rivet - Csk Holes SK215-435

6061/7075

#4-40 Tapped Holes - Thick Base SK215-435D

6061/7075

#4-40 Tapped Holes - Csk - Thick base SK215-7ENC

6061/7075

Rivet-Encapsulated-Straight SK215-7ENCD Rivet-Encapsulated-Csk

Skybolt Aeromotive Corp

6061/7075

1.000

0.865

1/8

1.375

.470

.073

.012

25.400

21.971

3.251

34.925

11.938

1.854

5.44

1.000

0.865

1/8

1.375

.470

.073

.012

25.400

21.971

3.251

34.925

11.938

1.854

5.44

1.000

0.865

1/8

1.375

.470

.063

.026

25.400

21.971

3.251

34.925

11.938

1.600

11.79

1.000

0.865

1/8

1.375

.470

.063

.026

25.400

21.971

3.251

34.925

11.938

1.600

11.79

1.000

0.865

1/8

1.375

.470

.170

.0145

25.400

21.971

3.251

34.925

11.938

4.318

6.58

1.000

0.865

1/8

1.375

.470

.170

.0145

25.400

21.971

3.251

34.925

11.938

4.318

6.58

1.000

0.865

1/8

1.375

.690

.073

.0165

25.400

21.971

3.251

34.925

17.526

1.854

7.48

1.000

0.865

1/8

1.375

.690

.073

.0165

25.400

21.971

3.251

34.925

17.526

1.854

7.48

Copyright 2017 Page 32

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Skybolt CLocÂŽ SK4000 Adjustable Floating Series

Rev061617

Dash 4 and Dash 7 Series Adjustable Receptacles TSO-C148 4 - Piece Series (Stud/Retainer - Grommet - Locking Receptacle)

SK245-16 Series* Floating (External Locking)

SK245-161 Series* Floating (External Locking)

(Can be installed without removing assembly)

Insert depth easily adjusts in .015 incriments. One fastener (stud) length covers a total thickness range of .300 or 10 dash#s (part#s) eliminating expensive inventory. Unlimited adjustment, even without removing the panel (Dash 5). Great for Pre-Load applications. New SK245-161 Series Receptacles have 18% weight advantages over any similar design.

Adjustable - Floating - Removable Insert Receptacle Skybolt

Revised

Insert

Cage

A

B

C

D

E

Weight

Part#

Part#

Material

Material

dec/mm

dec/mm

frac/mm

dec/mm

dec/mm

Lb/Grams

SK245-4

6061/7075

6061

SK245A161A SK245C161C

SK245-4C

303/303

302

1.000

.865

1/8

1.375

.510

.0160

25.400

21.971

3.251

34.925

12.954

7.26

1.000

.865

1/8

1.375

.510

.040

25.400

21.971

3.251

34.925

12.954

18.14

Adjustable - Floating - Standard 2-Piece Cage Receptacle Skybolt

Revised

Insert

Cage

A

B

C

D

E

Weight

Part#

Part#

Material

Material

dec/mm

dec/mm

frac/mm

dec/mm

dec/mm

Lb/Grams

SK245-16

12L14/12L14

ASTM A109

1.000

.840

1/8

1.375

.495

.0320

25.400

21.336

3.251

34.925

12.573

14.51

SK245-16D

12L14/12L14

ASTM A109

1.000

.840

1/8

1.375

.495

.0320

25.400

21.336

3.251

34.925

12.573

14.51

1.000

.840

1/8

1.375

.495

.0320

25.400

21.336

3.251

34.925

12.573

14.51

1.000

.840

1/8

1.375

.495

.0320

25.400

21.336

3.251

34.925

12.573

14.51

SK245C16C SK245C16CD

Skybolt Aeromotive Corp

303/303 303/303

305 305

Copyright 2017 Page 33

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Skybolt CLocÂŽ 4000 Series Rivetless Receptacles

REV 061917

4 - Piece Series (Stud - Grommet/Retainer - Locking Receptacle) New - CLocÂŽ Rivetless Easy Install Receptacles SK410 Series - Adjustable Depth Easy to Install rivetless Locking Receptacle SK410-28S - Stainless - 1/2-13 Thread - for wood, composites and SK4000 Series Nutserts SK410-29A Aluminum - 1/2-20 Thread for non-ferrous metals SK410-29S Stainless - 1/2-20 Thread for metals SK410-32S Stainless - 1/2-32 Thread for SK4000-35032 Nutserts

'G' Outer Panel

Inner Support Panel

Thickness

Thickness (1)

inches

mm

inches

Target Dash Number for mm

SK4002 and SK40S5 Series Studs

Min

Max

Min

Max

Min

Min

STUD DASH#

.010 .040 .070 .100 .130 .160 .190 .220 .250 .280 .310 .340 .370 .400

.310 .340 .370 .400 .430 .460 .490 .520 .550 .580 .610 .640 .670 .700

0.25 1.02 1.78 2.54 3.30 4.06 4.83 5.59 6.35 7.11 7.87 8.64 9.40 10.16

7.87 8.64 9.40 10.16 10.92 11.68 12.45 13.21 13.97 14.73 15.49 16.26 17.02 17.78

0.660 0.630 0.600 0.570 0.540 0.510 0.480 0.450 0.420 0.390 0.360 0.330 0.320 0.320

16.76 16.00 15.24 14.48 13.72 12.95 12.19 11.43 10.67 9.91 9.14 8.38 8.13 8.13

-1 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15

.430 .460 .490 .520 .550 .580 .610 .640

.730 .760 .790 .820 .850 .880 .910 .940

10.92 11.68 12.45 13.21 13.97 14.73 15.49 16.26

18.54 19.30 20.07 20.83 21.59 22.35 23.11 23.88

0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320

8.13 8.13 8.13 8.13 8.13 8.13 8.13 8.13

-16 -17 -18 -19 -20 -21 -22 -23

Note (1) Minimum Support Panel thickness is a value that assumes the outer panel thickness is the 'Min G' stated to the left. For every outer panel thickness value greater than the 'Min G', subtract that additional thickness from Inner Support Panel 'Min' value. Example: SK40S5-2 Stud - Outer Panel 'G' thickness is .032. (.032 - .010 = .022). Inner Support Panel 'Min' thickness is (.660 - .022 = .638). The support panel (normally) can not be any thinner than the length of the receptacle or .320 as noted.

Skybolt Aeromotive Corp

Copyright 2017 Page 34

Some Part#s Special order Only Refer to www.skybolt.com for current revision

REV 061917

Skybolt CLocÂŽ 4000 Series Rivetless Receptacles 4 - Piece Series (Stud - Grommet/Retainer - Locking Receptacle) New - CLocÂŽ Rivetless Easy Install Receptacles SK430 Series - Adjustable Depth - Extended Nose Easy to Install rivetless Locking Receptacle SK430-16S - Stainless - 1/2-13 Thread - for wood, composites and SK4000 Series Nutserts SK430-17S - Stainless - 1/2-20 Thread for non-ferrous metals SK430-32S - Stainless - 1/2-32 Thread for SK4000-35032 Nutsert Minimum Inner Panel Thickness for full thread engagement = .465 Drill Outer Panel to .640 (41/64) Maximum Outer Panel Thickness Chart 1- Receptacle is flush with Inner Panel Face

Chart 2 - Receptacle is fully extended from Inner Panel Face (add .335* to "flush" numbers)

All

Decimal

Decimal

mm

mm

Decimal

Decimal

mm

mm

SK4000 Series

min

max

min

max

min

max

min

max

-2S -3S -4S -5S -6S -7S -8S -9S -10S -11S -12S -13S -14S -15S -16S -17S -18S -19S -20S -21S -22S -23S

.350 .360 .390 .420 .450 .480 .510 .540 .570 .600 .630 .660 .690 .720 .750 .780 .810 .840 .870 .900 .930 .960

.360 .390 .420 .450 .480 .510 .540 .570 .600 .630 .660 .690 .720 .750 .780 .810 .840 .870 .900 .930 .960 .990

8.890 9.144 9.906 10.668 11.430 12.192 12.954 13.716 14.478 15.240 16.002 16.764 17.526 18.288 19.050 19.812 20.574 21.336 22.098 22.860 23.622 24.384

9.144 9.906 10.668 11.430 12.192 12.954 13.716 14.478 15.240 16.002 16.764 17.526 18.288 19.050 19.812 20.574 21.336 22.098 22.860 23.622 24.384 25.146

.665 .695 .725 .755 .785 .815 .845 .875 .905 .935 .965 .995 1.025 1.055 1.085 1.115 1.145 1.175 1.205 1.235 1.265 1.295

0.695 0.725 0.755 0.785 0.815 0.845 0.875 0.905 0.935 0.965 0.995 1.025 1.055 1.085 1.115 1.145 1.175 1.205 1.235 1.265 1.295 1.325

16.891 17.653 18.415 19.177 19.939 20.701 21.463 22.225 22.987 23.749 24.511 25.273 26.035 26.797 27.559 28.321 29.083 29.845 30.607 31.369 32.131 32.893

17.653 18.415 19.177 19.939 20.701 21.463 22.225 22.987 23.749 24.511 25.273 26.035 26.797 27.559 28.321 29.083 29.845 30.607 31.369 32.131 32.893 33.655

-24S -25S

.990 1.020

1.020 1.050

25.146 25.908

25.908 26.670

1.325 1.355

1.355 1.385

33.655 34.417

34.417 35.179

If you revert to Chart 2, using a longer stud than charted positions the SK430 receptacle back towards flush,

SK430 Series - Screw-In Locking Receptacle - Adjustable Depth (.335*) SK430-16S 1/2-13 SK430-17S 1/2-20 SK430-32S 1/2-32

.335

*Note - Distance from face of receptacle to the 1st thread.

Skybolt Aeromotive Corp

Copyright 2017 Page 35

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 061917

Skybolt CLocÂŽ 4000 Series Nutserts SK4000-200 SK4000-350 SK4000-500 Nutserts Excellent for any Blind or Non-Blind Mounting Application Ideal Industrial Applications Use thread locking compound to secure insert Use SK410 Series or SK430 Series Inserts - Patent Pending SK4000-200 1/2-13 or 1/2-32 Thread

SK4000-350 L SK4000-500

Hole Size

Grip

Body Dia

L Length

1/2-13 Steel-Yellow Zinc

11/16

.063-.200

.685

1/2-13 Steel-Yellow Zinc

11/16

.200-.350

.685

1/2-32 Steel-Yellow Zinc

11/16

.200-.350

1/2-13 Steel-Yellow Zinc

11/16

.350-.500

Thread

SK4000-200 SK4000-350 SK4000-35032 SK4000-500

Material

Dia

Flange Thickness

L (Protrusion) Installed (max)

1.150 1.300

.865

.047

.850

.865

.047

.850

.685

1.300

.865

.047

.850

.685

1.450

.865

.047

.860

Nutsert Installation Tool

SK4000-NST

Use 271 Red LocktiteÂŽ to lock threads when properly adjusted. Warning: Thread lockers set up in approximately 5 minutes. Adjust insert so that the standard stud (SK4002/40S5) head is no lower than flush with the grommet. For SK4002-FW Folding Wings, allow a minimum of .150 distance from the head surface to the grommet surface or use a .055 shim between the head and the grommet. If insert is set to deep with the stud locked, you will not be able to unlock the stud after 5

Stud Grip Chart - SK410 Series Insert

Stud Grip Chart - SK430 Series Insert

Standard

Folding Wing

Grip-Decimal

Grip-MM

Standard

Folding Wing

Grip-Decimal

Grip-MM

SK4002/40S5

SK4002-FW

SK4002/40S5

SK4002-FW

-3 -4 -5 -6 -7 -8 -9 -10 -11 -12

Min-Max .080-.300

Min-Max

-2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12

2.03-7.62

5.08-15.24

2.79-8.38

.410-.630

10.41-16.00

.140-.360

3.56-9.14

.440-.660

.170-.390

4.32-9.91

.470-.690

11.18-16.76 11.94-17.53

.200-.420

5.08-10.67

.500-.720

12.70-18.29

.230-.450

5.84-11.43

.530-.750

13.46-19.05

.260-.480

6.60-12.19

.560-.780

14.22-19.81

.290-.510 .320-.540 .350-.570 .380-.600

7.37-12.95 8.13-13.72 8.89-14.48 9.65-15.24

-3 -4 -5 -6 -7 -8 -9 -10 -11 -12

Min-Max .200-.600

.110-.330

-2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12

.590-.810 .620-.840 .650-.870 .680-.900

14.99-20.57 15.75-21.34 16.51-22.10 17.27-22.86

Skybolt Aeromotive Corp

-13

Copyright 2017 Page 36

-13

Min-Max

Some Part#s Special Order Only Refer to www.skybolt .com for current revision

REV 061917

Skybolt CLocÂŽ 4003 Series Studs 2 - Piece Series (Stud/Grommet - Locking Receptacle) Stud/Grommet Assembly is bonded into Outer Panel SK4003 Series -

SK4003G1S Grommet - does not use separate cup like the SK4002/40S5 Series.

SK4003 (Stud/Grommet Assembly) used with SK430 Series receptacle

Skybolt Aeromotive Corp

Copyright 2017 Page 37

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

REV 061917

Pages 38-41 Intentionally Left Blank (Heavy Equipment - Ballistic Fasteners)

Skybolt Aeromotive Corp

Copyright 2017 Page 38-41

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

SK2003 Series Engine Cowling Mounts

The Skybolt SK2003 Series cowling mounts replace the OEM Cessna®/Lord® J7444 Series mounts with full FAAPMA and FAA TSO-C148 approvals. The SK2003 mount is now the preferred mount for the world’s largest flight school and is featured on all Yingling zero-time Ascend 172 airplanes. Our generation IV mounts have evolved as the flight school proven best ever mount on the market for strength and lasting durability. Skybolt’s exclusive 100% stress test inspection insures that each and every mount will go the distance without transferring unwanted stress to the airframe components or firewall.

US Patents 7,997,843 and 8,282,329 SK2003-14A Replaces J7444-14 Southco 82 Fastener 67-On C150, 67-86 C172, C172XP, 68-78 C177 .0230lb

FAA Form 8130-3 included with all mounts

SK2003-24A

SK2003-42A

Replaces J7444-24 CLoc® 27S3 Fastener 73-86 C182 .0230 lb

Replaces J7444-36/42 Cloc® 40S5S Fastener C172 R/S, Skybolt SK203 STCd Conversions .0230 lb

SK2003-50ADJ Adjustable Depth #82 Southco and all CLoc® Series Use SK-SP5 to adjust .0325 lb

Proven – Innovative – Durable – Flight school tested and specified to significantly reduce maintenance costs(1) (1)Independent tests by Embry Riddle University and University of North Dakota in cooperation with Cessna

Skybolt Aeromotive Corp

Copyright 2016 Page 42

Pricing Subject to Change Refer to www.skybolt.com for current version

SK203-TEM1 . Skybolt developed the template alignment system to accurately determine the proper location of the mount to the corresponding cowling fastener. Simply locate all holes prior to removing the cowling by tracing the three holes onto the airframe. With the cowling removed the desired center can be determined for all locations

SK-AW4 and AW5 Camwashers CamWashers allow simple location adjustment of the Platemount location so that it is aligned with the corresponding cowling fastener.

Simply modify any Skybolt SK2003A Series Mount for the CamWashers, install, and "dial" the location of the Platemount as determined by the template. No complex drilling of any aircraft components is required to perfectly align any Cessna cowling. The patented design allows full movement in both axis plus a center neutral location. Shown is the SK2003-50ADJ with baseplate holes drilled with a Unibit-1 drill to 7/16-inch.

SK2003-AW4S includes 2 ea CamWashers. Use with any Non-Adjusting Platemount SK2003-AW5S includes 2 ea CamWashers and 1ea SK2001 Predrilled Shim. Use with SK2003-50ADJ Platemount

Camwashers dialed full left of center

Skybolt Aeromotive Corp

Center default location Camwashers dialed full right of center

Copyright 2016 Page 43

Pricing Subject to Change Refer to www.skybolt.com for current version

Rev 121916

CLoc Tools ®

Production Drill Jigs with Flex Handle.

SK2DJ – 2000 Receptacles (.750) SK4DJ – 4000 Receptacles (1.00)

The first step to install CLoc® Fasteners (once fastener hole position is established with a 1/8” pilot hole in outer and inner panel….as if you were installing a POP rivet), is to drill the locking receptacle mounting holes (rivet holes) and center relief holes. Skybolt offers simple drill templates to drill receptacle rivet holes. For CLoc® 2000 Series, use Template-213 or SK2DG. Use a Unibit-1 to drill receptacle relief hole (13/32)and fastener hole (11/32)in the outer panel. For CLoc® 4000 Series, use Template-215 or SK4DG. You must use the Template-245 to drill the receptacle center relief hole (cleko from the back). Use a Unibit-3 or-4 to drill this large hole (9/16-11/16). If you attempt to drill this hole without the Template-245, the drill will “walk” and you will have an un-centered hole. For the outer panel grommet hole (4000 Series), the Unibit-1 (15/32 step) will easily expand the hole without “walking” Note: The offset hole shown in Template-213 and -215 is to drill an optional access hole to adjust SK213-2 and SK215/SK245-4 Adjustable receptacles that use an external locking clip.

It is important to note that these photos show the proper “front” face of the template (turn it over and the holes will not function with the receptacle. Use caution when drilling so that the holes are oriented properly).

Template-215

120° 4000 Series Grommet Countersink Tool Template-213

Template-245

Economy Drill Jigs

Unibits-1 and Unibit-3 or-4

Includes 3 Pilots – 7/16, 15/32, 1/2 SK4CS – Includes Microstop Cage

SK4P3 Pliers Compress 4000 Series cup to insert stud through grommet SK-T26 Combination Tool – Installs 2000 Series “2600-LWS” Retainers –or4000 Series SK-R4GS Grommet Retainers.

Note: (a) the SK-R4G Retainer is punched towards the large end of the taper tool prior to pressing it into position with the handle. (b) this tool only works with stud not installed into the grommet (install the retainers onto the grommets 1st; then install the studs with SK-4P3 Pliers.

SK-SP5 Receptacle Adjustment Tool. For CLoc® Dash 5 Adjusting Receptacles. Uses the sliding sleeve as a depth setter to determine the target position of the receptacle insert. By sliding the sleeve to the far end (flush with the pointed end and locking, reverse the cap and the tool becomes a traditional SK-T26 Tool to install SK-R4GS grommet retainers.

Skybolt Aeromotive Corp

Copyright 2017 Page 44

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Skybolt ZLoc® Stainless Series Fasteners

Rev 010612

Skybolt manufactures studs and buttons similar to existing designs.

Dzus is a registered trademark of the Dzus Fastener Co. Skybolt has no affiliation with Dzus Fasteners.

Design Selection Procedure: 1. From the information in the following table, consider a Stud type.

2. Select type of retainer (grommet or GP type retainer).

3. From charts, select Stud and S Spring combination for the application.

Standard Line Fastener Size 3 4 5 6 Performance Locked Serive Tension (LBS) 20 30 45 55 Max. Tension W/O Distortion (LBS) 45 60 85 110 Rated Shear (LBS) 100 150 200 300 Wear Life (Uses) 5M 5M 25M 40M Max. sheet separation at 150% of locked service tension = 3/64".

7 65 125 350 40M

STUDS - Hardened Carbon Steel - Cadmium Plated per QQ-P-416, Type II, Class 2. and 300 Series Stainless (Skybolt Stainless ZLoc® Series Fasteners are TSO-C148 ) Note: SKYBOLT manufactures and stocks stainless ZLoc® Series studs.

WING HEAD STUD Type AW,AJW,FW,FAW,FJW

Note: AJ, FJ, AJW, and FJW studs have a long undercut and are a direct replacement for A and F studs. FA studs (common to WWII aircraft) available in 303 Stainless.

STUD RETAINERS

Type GA and GF Grommets are aluminum.

Type GA Full Grommet For use with all Studs except Flush Head

RECEPTACLE - S SPRING

Type GF Full Grommet For use with Flush Head Studs (FJ Studs)

Type GP Retainer is Nylon Type GP Half Grommet For use with all Studs

Cadmium plated music wire.

Type SA Spring

Skybolt Aeromotive Corp

Copyright 2012 Page 45

Some Patr#s Special order Only Refer to www.skybolt.com for current revision

Skybolt Aircraft ZLoc® Studs Head Size W 5/16

Drill Outer Panel A max 7/32

Drill Support Panel B* 3/8

Typical Stud Size Lt L 3-25 0.325 0.250 3-30 0.375 0.300 4-30 0.400 0.300 7/16 5/16 3/4 4-35 0.450 0.350 4-40 0.500 0.400 5-35 0.475 0.350 9/16 3/8 5/8 5-40 0.525 0.400 5-45 0.575 0.450 5-50 0.625 0.500 5-55 0.675 0.550 6-40 0.550 0.400 5/8 7/16 1 6-45 0.600 0.450 6-50 0.650 0.500 6-55 0.700 0.550 6.5-40 0.570 0.400 11/16 1/2 1 6.5-45 0.620 0.450 6.5-50 0.670 0.500 6.5-55 0.720 0.550 7-40 0.575 0.400 3/4 17/32 1-1/16 7-50 0.675 0.500 7-60 0.775 0.600 Note: B* is oversize to allow relief for grommet/retainer or dimpled panels.

Rev 010612

Rivet Spacing G 5/8

Rivet Size

3/4

3/32

1"

1/8

1-3/8

1/8

1-3/8

1/8

1-7/16

1/8

3/32

S SPRING RECEPTACLES S Spring Part#

Stud Grommet/Retainers Stud Size 3 4

5 6 6.5 7

Panel (P) Thickness .015-.025 .026-.050 .051-.094 .015-.025 .026-.050 .051-.075 .076-.100 .031-.062 .063-.094 .095-.125 .040-.065 .066-.100 .101-.135 Max .062 .063-.093 .094-.200 .050-.095 .096-.156 .157-.218

GA and GF Full Grommet/Retainer Type Type GA GF OD GA3-175 NA 7/32 GA3-200 NA GA3-250 NA GA4-225 GF4-125 5/16 GA4-250 GF4-150 GA4-275 GF4-175 GA4-300 GF4-200 GA5-312 GF5-175 3/8 GA5-350 GF5-225 GA5-375 GF5-250 GA6-350 GF6-218 7/16 GA6-375 GF6-250 GA6-425 GF6-300 GF6.5-218 1/2 GA6.5-375 GF6.5-250 GA6.5-500 GA7-375 GF7-250 17/32 GA7-475 GF7-325 GA7-525 GF7-400

T* 0.015

GP Plastic Retainer Type GP OD GP3B 5/16

T .035

0.025

GP4B

7/16

.035

0.028

GP5B

9/16

.035

0.028

GP6B

5/8

.045

0.035

GP6B

5/8

.045

0.040

NA

Size 3 Size 4 Size 5

S3-150 S3-175 S4-200 S4-225 S5A-200 S5A-225 S5A-250 S5A-275 S5A-300 S5A-325 Size S6A-225 6 & 6.5 S6A-250 S6A-275 S6A-300 S6A-400 S6A-425 Size S7A-225 7 S7A-250 S7A-275 S7A-300

Total Thickness Charts Choose correct chart for Stud Size. Enter Total Thickness column and select Stud/Spring combination

Size 3 Stud, SK3 Spring Total Thickness .045-.069 .070-.094 .095-.119 .120-.144 .145-.169 .170-.194

Stud Dim L -20 -20 -25 -25 -30 -30

Size 4 Stud, SK4 Spring Use Spring Dim H -175 -150 -175 -150 -175 -150

Total Thickness .100-.124 .125-.149 .150-.174 .175-.199 .200-.224 .225-.249

Stud Dim L -30 -30 -35 -35 -40 -40

Use Spring Dim H -225 -200 -225 -200 -225 -200

Size 5 Stud, SK5 Spring Total Thickness .055-.079 .080-.104 .105-.129 .130-.154 .155-.179 .180-.204 .205-.229 .230-.254 .255-.279

Determine Total Thickness by adding: 1) Outside Panel Thickness (P) 2) Inside (Support) Panel Thickness (Q) 3) Grommet Thickness (T) if GA or GF grommet used.

4) Allow for gasket material or paint build-up. Allow for panel face misalignment.

Skybolt Aeromotive Corp

Copyright 2012 Page 46

Stud Dim L -30 -30 -30 -30 -40 -40 -40 -40 -50

Use Spring Dim H -275 -250 -225 -200 -275 -250 -225 -200 -275

Size 6 & 7 Stud, SK6 & 7 Spring Total Thickness .140-.164 .165-.189 .190-.214 .215-.239 .240-.264 .265-.289 .290-.314 .315-.339 .340-.364

Stud Dim L -40 -40 -40 -40 -50 -50 -50 -50 -60

Use Spring Dim H -300 -275 -250 -225 -300 -275 -250 -225 -300

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 030917

ZLoc® Fastener Zlocker™ Fastener Principles and Design Options One usually thinks of two components as part of the ZLoc® Fastener, the Stud and Spring Receptacle. In the case of the EHF Ejector Series Stud, it is retained in the panel, when unlocked by the flange being fastened to the outside panel. Standard ZLoc® Studs, typically use a Stud retainer to prevent them from falling from the panel when unlocked. Two common retainers are the GP (Nylon) washer or the GA (for Oval Head Studs) or GF(for Flush Head Studs). GP (Nylon) Retainers require no installation tooling. GA and GF Grommet/Retainers require tooling to install. GP (Nylon) Grommets do not figure into Total Thickness calculations whereas GA or GF Grommets add .028 to Total Thickness Calculations.

Some helpful hints to remember about ZLoc® Fasteners: 1) Thicker panels require shorter Springs for a given Stud. Likewise, thinner panels require a taller Spring for a given Stud.

2) When locked, the Stud slot or wing always aligns with the Spring mounting holes. Therefore, whatever angle you mount the Spring Receptacle, the Stud will align with it when locked.

3) SKEHF5 Studs should only use S5A or #5 Springs. SKEHF6 Studs can use either S5A or S6A Springs.

4) TOTAL THICKNESS is the summation of both the outside and inside panels plus allowances for gaskets, grommets, interference or panels that do not lay flat together. Panel facing (panels do not lay flat together, and in most applications, they do not) can add greatly to charted values.

5) If springs are mounted to Weld Tabs of Plates, the Tab serves as the Inside Panel and adds .100 to Total Thickness 6) If locking torque is too tight or too loose, bend the spring with Skybolt Tool SK-7301 7) The Part# of a ZLoc® stud is the L Dimension measured from the head (beneath the head for Oval Head, on the top of the head for Flat Head) to the far end of the slot where the spring rests when locked. SKFO65-50 is .50 from the flat of the head to the end of the slot saddle.

8) The Part# of the Spring is the height of the Spring. SK6-375 is .375 high.

L

Standard ZLoc® Buttons

Oval Head #5 Steel SKAO5-40 SKAO5-50

5/16 Shank Torque Load 40 in-lbs L Retainer Skytanium ZGO5-40 .400 na ZGO5-50 .500 na

Flat Head #5 Steel SKFO5-40 SKFO5-50

5/16 Shank Torque Load 40 in-lbs L Retainer Skytanium ZGO5-40 .400 na ZGO5-50 .500 na

Oval Head #65 Steel SKAO65-40 SKAO65-50 SKAO65-55 SKAO65-60 SKAO65-65

7/16 Shank Skytanium ZGO65-40 ZGO65-50 ZGO65-55 ZGO65-60 ZGO65-60

Flat Head #65 Steel SKFO65-40 SKFO65-50 SKFO65-55 SKFO65-60 SKFO65-65

7/16 Shank Torque Load 55 in-lbs L Retainer Skytanium ZGO65-40 .400 -6L ZGO65-50 .500 -6L ZGO65-55 .550 -6L ZGO65-60 .600 -6L ZGO65-60 .650 -6L

Skybolt Aeromotive Corp

Torque Load 55 in-lbs L Retainer .400 -6L .500 -6L .550 -6L .600 -6L .650 -6L

Copyright 2017 Page 47

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 030917

ZLoc® Fastener Zlocker™ Fastener ZLockerPro™ - Preset Locker Unique Skybolt® Collared Slot - no screwdriver slippage New improved ramp profile for maximum service life

Oval Head #65 Steel SKO65-40PRO SKO65-50PRO SKO65-55PRO SKO65-60PRO SKO65-65PRO

7/16 Shank Torque Load 55 in-lbs L Retainer Skytanium ZGO65-40PRO .400 -6L ZGO65-50PRO .500 -6L ZGO65-55PRO .550 -6L ZGO65-60PRO .600 -6L ZGO65-60PRO .650 -6L

Flat Head #65 7/16 Shank Torque Load 55 in-lbs L Retainer Steel Skytanium SKF65-40PRO ZGO65-40PRO .400 -6L SKF65-50PRO ZGO65-50PRO .500 -6L SKF65-55PRO ZGO65-55PRO .550 -6L SKF65-60PRO ZGO65-60PRO .600 -6L SKF65-65PRO ZGO65-60PRO .650 -6L

ZLockerTF™ - Adjustable Set Screw Locker Unique Skybolt® Collared Slot - no screwdriver slippage New improved ramp profile for maximum service life Direct for Standard Buttons Oval Head replacement #65 7/16 Shank Torque Load 55 in-lbs Flat Head #65 7/16 Shank Torque Load 55 in-lbs

Steel SKO65-40TF SKO65-50TF SKO65-55TF SKO65-60TF SKO65-65TF

Skytanium ZGO65-40TF ZGO65-50TF ZGO65-55TF ZGO65-60TF ZGO65-60TF

Skybolt Aeromotive Corp

L .400 .500 .550 .600 .650

Retainer -6L -6L -6L -6L -6L

Steel SKF65-40TF SKF65-50TF SKF65-55TF SKF65-60TF SKF65-65TF

Copyright 2017 Page 48

Skytanium ZGO65-40TF ZGO65-50TF ZGO65-55TF ZGO65-60TF ZGO65-60TF

L .400 .500 .550 .600 .650

Retainer -6L -6L -6L -6L -6L

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 030917

ZLoc® Fastener Zlocker™ Fastener Skybolt SK EHF Ejector Series SKEHF5 and SKEHF6 Self Ejecting Fasteners provide ZLoc® 1/4-turn action with studs that eject from the receptacle when opened. Ejected studs won't hang up when sliding or curved panels are removed and give visual sign of unlocked fastener. The Stud assembly is riveted to the panel with 1/8" rivets or screws.

SKEHF

Diameter

L

Thickness

SKEHF5-40

5/8

.40

.075-.125

SKEHF5-50

5/8

.50

.150-.225

SKEHF5-50W

5/8

.50

.150-.225

SKEHF5-55

5/8

.55

.225-.275

SKEHF5-60

5/8

.60

.275-.325

SKEHF5-65

5/8

.65

325-.425

SKEHF6-40

3/4

.40

.050-.100

SKEHF6-50

3/4

.50

.100-.175

SKEHF6-55

3/4

.55

.200-.250

SKEHF6-60

3/4

.60

.250-.300

SKEHF6-65

3/4

.65

.300-.350

Skybolt SK EJ Ejector Series SKEJ Series Ejecting Fasteners utilize a threaded backing collar to secure fastener to outer panel. Made from exclusive Skytanium®, the fastener has the same strength rating as the SKEHF5 Series, is 30% lighter, with superior finish. No more ugly rivets!

Head Diameter L SKEJ-40A 3/4 .50 SKEJ-50A 3/4 .60 SKEJ-50AW 3/4 .60 SKEJ-55A 3/4 .65 SKEJ-60A 3/4 .70 SKEJ-65A 3/4 .75 SK-BN1 Standard Collar .125 Panel SK-BN2 Optional Collar .187 Panel SK-BN3 Optional Collar .250 Panel Use LockTite to retain threaded BN collar

SKEJ

Skybolt Aeromotive Corp

Total* Thickness .075-.125 .150-.225 .150-.225 .225-.275 .275-.325 325-.425

Copyright 2017 Page 49

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 030917

ZLoc® Fastener Zlocker™ Fastener Skybolt ZLoc® Series Tabs and Springs Tabs are welded to frame to serve as a spring mount Use SSP43 1/8 Steel Pop Rivets.

SK944

SK945EHF

Use SK4-225 Spring

Use SK5-325 Spring

Use for all #4 Buttons

Use for all #5 Buttons & EHF/EJ Studs

.750 Rivet Spacing

1.000 Rivet Spacing

.100 Thick (Including Spring Dimple)

.100 Thick (Including Spring Dimple)

Weight = .0115 lbs

Weight = .0220 lbs

SK945 and SK946

SK945CL

Use SK5-325 or SK6-375 Spring

Use SK5-325 Spring

Use for all #5 or #6 Buttons & EHF Studs

Use CLoc SK214-16A, 244-16, SK245 Series

1.000 Rivet Spacing (SK945)

1.000 Rivet Spacing

or 1.375 Rivet Spacing (SK946)

.100 Thick (Including Spring Dimple)

.100 Thick (Including Spring Dimple) Weight = .0260 lbs

Weight = .0165 lbs

ZLoc® SPRINGS (Most Common) SK4-225 #4 Spring

3/4" Rivet Spacing

SK5-325 #5 Spring

1" Rivet Spacing

SK6-325 #6 Spring

1-3/8 Rivet Spacing

SK6-375 #6 Spring

1-3/8" Rivet Spacing

SK-DP1 PANEL REINFORCEMENT PLATE This aluminum Doubler Plate is used with all #6 SKFO65 and ZGF65 Flush Head ZLoc® Studs to add panel strength.

Polished Finish

Skybolt Aeromotive Corp

Copyright 2017 Page 50

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 030917

ZLoc® Fastener Zlocker™ Fastener Skybolt ZLoc® and ALoc® Tools SK-DT1 Panel Dimpling Tool Dimple any .375 diameter hole 100 to 120 degrees. Use with Size 5, 6, or ZGF65 Series studs. Simply place

GROMMET TOOLING - ZLoc® Aircraft Series The Skybolt® ZLoc® or Dzus® installation tools are specifically designed for the SK-41405-3 Clamp Tool. We developed this method of staking the ZLoc stud/grommet 25 years ago with preferred results in insuring a uniform installation. The traditional hammer tools are very awkward to use and typically result in a poor installation. Only Skybolt® uses a unique centering system that allows the dies to float and self-align. Competitor’s tools are pre-set in the clamp thus alignment many or may not be true. We stock a complete range of tools from -3 thru -6.5 sizes. One SK-41405-2 Clamp fits all tool sets. Order clamp separate.

Set (Less Clamp) SK-A3C SK-F3C SK-A4C SK-F4C SK-A5C* SK-F5C SK-A6C SK-F6C SK-A65C SK-F65C SK-41405-3 Clamp

*Note: The SK-A5C tool is designed to replace grommets on Beech Bonanza cowlings without removing brackets from cowling.

4 Tools 2 Tools 4 Tools 2 Tools 4 Tools 2 Tools 4 Tools 2 Tools 4 Tools 2 Tools

ZLoc® Spring Adjusting Tool

SK-7302

Designed to modify spring tension in either direction even when mounted to thin panels.

Works with #5 and #6 ZLoc® Springs

GROMMET TOOLING ALoc® Series A must to replace any ALoc® Grommet Use with SK-41405-3 Clamp

ZLoc® Driver Tool

Type Head

SK29693/29695C

#2 Flush

SK9529/29667C

#5 Flush

SK9529/29770C

#5 Round

Skybolt Aeromotive Corp

Copyright 2017 Page 51

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 031417

CLoc® Fastener NASCAR Racing Principles and Design If only aerospace was as particular to weight as the racing industry. The Skybolt® Skytanium® CLoc® fasteners are a staple in NASCAR, most commonly seen in the rear deck side windows. With over 30 million miles on the track, we can truly say, we have been tested. Skybolt is in victory lane every Friday, Saturday, and Sunday, probably because every major team relies on Skybolt® fastening designs. We constantly innovate improvements in weight, strength, and performance.

Some helpful hints to remember about CLoc® Fasteners: 1) If you can install a POP rivet, you can install a CLoc® fastener with a couple of extra steps.

2) When locked, the Stud slot or wing always aligns with the receptacle mounting holes. Therefore, whatever angle you mount the Receptacle, the Stud (slot) will align with it when locked.

3) TOTAL THICKNESS is the summation of both the outside and inside panels plus allowances for gaskets, grommets, interference or panels that do not lay flat together. Panel facing (panels do not lay flat together, and in most applications, they do not) can add greatly to charted values.

4) The grip range for any CLoc® is .030. Unlike a Dzus stud, there is no spring to bend and any attempt to force the stud will over stress the crosspin.

5) Because of the restrictive grip range, Skybolt invented and developed the Adjustable Recptacle (SK213 and SK215/245 Series). These receptacles are the perfect fit for smaller shops that cannot justify huge inventories of various stud dash number.

6) Studs can be identified by a dash number on the head or by measuring the length and referring to a Skybolt chart.

ZG28S3 Series Lightweight Studs

Skybolt Aeromotive Corp

Copyright 2017 Page 51.1

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 031417

CLocÂŽ Fastener NASCAR Racing

ZG28T3

ZG28S3

SK2600-LWS Stainless stud retainer. Use Skybolt SK-T26 Tool for installation.

SK212 Series

SK213-1* and -2 Series

Fixed Depth

Adjustable Depth

Receptacle

Receptacle

Combined Panel

Combined Panel

Total

Thickness (SK213-2)

Stud Length

Thickness

Thickness

Decimal Min Max

Millimeter Min Max

.010 .030 .060 .090 .120 .150 .180 .210 .240 .270 .300 .330 .360 .390 .420 .450

.029 .059 .089 .119 .149 .179 .209 .239 .269 .299 .329 .359 .389 .419 .449 .479

0.254 0.762 1.524 2.286 3.048 3.810 4.572 5.334 6.096 6.858 7.620 8.382 9.144 9.906 10.668 11.430

0.737 1.499 2.261 3.023 3.785 4.547 5.309 6.071 6.833 7.595 8.357 9.119 9.881 10.643 11.405 12.167

Decimal Min* Max .020 .020 .050 .080 .110 .140 .170 .200 .230 .260 .290 .320 .350 .380 .410 .440

.270 .300 .330 .360 .390 .420 .450 .480 .510 .540 .570 .600 .630 .660 .690 .720

Millimeter Min Max 0.508 0.508 1.270 2.032 2.794 3.556 4.318 5.080 5.842 6.604 7.366 8.128 8.890 9.652 10.414 11.176

6.858 7.620 8.382 9.144 9.906 10.668 11.430 12.192 12.954 13.716 14.478 15.240 16.002 16.764 17.526 18.288

L Decimal Millimeter .610 .640 .670 .700 .730 .760 .790 .820 .850 .880 .910 .940 .970 1.000 1.030 1.060

15.494 16.256 17.018 17.780 18.542 19.304 20.066 20.828 21.590 22.352 23.114 23.876 24.638 25.400 26.162 26.924

Flush Head ZG2800 Series Stud Skytanium Phillips (2)

Skytanium #15 Torx (3)

ZG28S3-1 ZG28S3-2 ZG28S3-3 ZG28S3-4 ZG28S3-5 ZG28S3-6 ZG28S3-7 ZG28S3-8 ZG28S3-9 ZG28S3-10 ZG28S3-11 ZG28S3-12 ZG28S3-13 ZG28S3-14 ZG28S3-15 ZG28S3-16

ZG28T3-1 ZG28T3-2 ZG28T3-3 ZG28T3-4 ZG28T3-5 ZG28T3-6 ZG28T3-7 ZG28T3-8 ZG28T3-9 ZG28T3-10 ZG28T3-11 ZG28T3-12 ZG28T3-13 ZG28T3-14 ZG28T3-15 ZG28T3-16

* For SK213-1 Series Receptacles - Add .120 to min thickness (shorter barrel) Note: Cloc-Camloc grip charts are not identical for 2800 Series parts.

Physical dimensions are identical. Note (2) ZG28S3 use stainless stud/Skytanium cup. (3) Skytanium stud/cup

Skybolt Aeromotive Corp

Copyright 2017 Page 51.2

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 031417

CLocÂŽ Fastener NASCAR Racing

SK212-12 Series Standard Fixed Depth Receptacles SK212-12

Material

Finish

Rivet Size

Weight .0105/4.8g

Steel

Machined/Zinc

3/32

SK212-12ACA

Alum380

Cast/None

3/32

.0040/1.9

SK212-12A

Alum6061

Machined/None

3/32

.0035/1.7

SK212-12A8CA

Alum380

Cast/None

1/8

.0040/1.9

SK212-12A8

Alum6061

Machined/None

1/8

.0035/1.7

SK212-12AC

Alum6061

Anti Chafe

1/8

.0040/1.8

SK212-12AC2

Alum6061

Anti Chafe

1/8

.0040/1.8

SK212-12S

Stain303

Machined/None

3/32

.0105/4.8

SK213 Adjustable Series Standard Adjustable Depth Receptacles Finish

Rivet Size

Weight

L

SK213-1

Skytanium

Material

Machined/None

3/32

.0070/3.2

.410

SK213-1S

Stain303

Machined/None

3/32

.0155/7.1

.410

SK213-2

Skytanium

Machined/None

3/32

.0070/3.2

.530

SK213-2D

Skytanium

Machined/None

3/32csk

.0070/3.2

.530

SK213-26D

Skytanium

Machined/None

3/32csk

.0070/3.2

.530

SK213-28 SK213-28D

Skytanium Skytanium

Machined/None Machined/None

1/8 1/8csk

.0070/3.2 .0070/3.2

.530 .530

See Page 44 for Installation Tooling

Skybolt Aeromotive Corp

Copyright 2017 Page 51.3

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 031017

Skybolt ALoc® Series Fasteners Airloc® Replacement TSO-C148 ALoc® Fasteners are common on Beechcraft® airplanes and latches on many cowlings. The design consists of a simple stud with a pin pressed in the shank. The pin must be installed after the stud is installed and removed prior to removing the stud. Some panel applications for #2, #5, and #7 studs may use a wear grommet. Unlike a ZLoc® Fastener, this grommet probably does not require replacement when replacing studs.

ALoc® Fasteners are made in various stud blank lengths and this length is indicated by the 1st Dash#. Each length can have up to 10 2nd Dash#s, or grip sizes. The 2nd Dash# indicates the maximum grip range in .010 increments. Note that the ALoc® design has the least grip range of all 1/4 turn fasteners. Skybolt primarily stocks certain sizes in Stainless Steel for replacement purposes only. See Conversion Kits for STCd Aloc to CLoc (Camloc style) conversions. Skybolt now has most common Winged parts in stock.

ALoc® Studs Series

Flush Steel Hd#

Round Steel Hd#

Head Dia

Steel Pin#

Cloc® Conversion

1 2 5 7

294426 98264 98265 98266

294422 98293 98292 98291

1/4 11/32 9/16 11/16

294424 99785-2 99836 99799

2000 Series 4000 Series

Common Stainless Steel Part Numbers Airloc Skybolt Aloc Steel Part# Stainles Part# 98264-2-090 98293-1-060 98265-1-070 98265-1-080 98265-1-100 98265-2-180 98265-2-190 98265-2-200 98265-2-210 98265-2-230 98265-2-240 98265-2-250 98292-1-080 98292-1-090 98292-2-170 98292-2-250

SK112060-1-090 SK98293-1-060SS SK294186-1-070 SK294186-1-080 SK294186-1-100 SK294186-2-180 SK294186-2-190 SK294186-2-200 SK294186-2-210 SK294186-2-230 SK294186-2-240 SK294186-2-250 SK294290-1-080 SK294290-1-090 SK294290-2-170 294290-2-250

Type

Grip

'A'

Length

#2 Flush #2 Round #5 Flush #5 Flush #5 Flush #5 Flush #5 Flush #5 Flush #5 Flush #5 Flush #5 Flush #5 Flush #5 Round #5 Round #5 Round #5 Round

.081-.090 .051-.060 .061-.070 .071-.080 .091-.100 .171-.180 .181-.190 .191-.200 .201-.210 .220-.230 .231-.240 .241-.250 .071-.080 .081-.090 .161-.170 .241-.250

.230 .200 .257 267 .287 .367 .377 .387 .397 .417 .427 .437 .267 .277 .357 .437

.359 .359 500 .500 .500 .609 .609 .609 .609 .609 .609 .609 .500 .500 .609 .609

*Does not include Pin. Wing studs are available in all sizes.

ALoc® Grommets Series

Panel Thickness

Flush Hd#

None Up to .040 .041-.080 .040-.121 .122-.201 Up to .040 .041-.121

295846-1 295846-2 295250-1 295250-2 295900-1 295900-2

1 2 5 7

(May not require replacement when replacing studs) Curling Round Curling Tools Hd# Tools 29693/29695

98013 295902 99874-1 99874-2 295899-1 295899-2

29693/29694

See Tools P49

9529/29770

See Tools P49

29674/29685

See Tools P49

Csk

Rivet

Rivet Spacing

99947-P098 99947-P130

99967-C098 99947-C098 99947-C130

99948-P130

99948-C130

1/16 3/32 3/32 3/32 1/8 3/32 1/8

1/2 1/2 3/4 1.0 1.0 1-3/8 1-3/8

9529/29667 9543/29689

ALoc® Receptacles Series 1 2 5 7

Solid Receptacle Plain 294420-P067 294420-P098 99871-P098 99833-P098 99833-P130 99797-P098 99797-P130

Skybolt Aeromotive Corp

Csk

Plain Floating Rec

294420-C067 98871-C098 99833-C098 99833-C130 99797-C098 99948-P130

Copyright 2017 Page 52

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 041316

Southco 1/4 Turn Fasteners Southco Fasteners are very common to Cessna Airplanes.

This product was previously known as a Lions Fastener.

Series #82 #85

A .375 .562

C 7/8 1-1/8

D 7/16 7/16

#82 Oval Head Studs - Convert to CLoc® 2000 Series Total Material Thickness .070-.089 .090-.109 .110-.129 .130-.149 .150-.169 .170-.189 .190-.209 .210-.229 .230-.249 .250-.269 .270-.289 .290-.309

Slotted Steel 82-11-080-16 82-11-100-16 82-11-120-16 82-11-140-16 82-11-160-16 82-11-180-16 82-11-200-16 82-11-220-16 82-11-240-16 82-11-260-16 82-11-280-16 82-11-300-16

Stainless Steel 82-11-080-20 82-11-100-20 82-11-120-20 82-11-140-20 82-11-160-20 82-11-180-20 82-11-200-20 82-11-220-20 82-11-240-20 82-11-260-20 82-11-280-20 82-11-300-20

Phillips Steel 82-19-080-16 82-19-100-16 82-19-120-16 82-19-140-16 82-19-160-16 82-19-180-16 82-19-200-16 82-19-220-16 82-19-240-16 82-19-260-16 82-19-280-16 82-19-300-16

Stainless Steel 82-19-080-20 82-19-100-20 82-19-120-20 82-19-140-20 82-19-160-20 82-19-180-20 82-19-200-20 82-19-220-20 82-19-240-20 82-19-260-20 82-19-280-20 82-19-300-20

'F' .375 .395 .415 .435 .455 .475 .495 .515 .535 .555 .575 .595

#82 Flush Head Studs - Convert to CLoc® 2000 Series Total Material Thickness .070-.089 .090-.109 .110-.129 .130-.149 .150-.169 .170-.189 .190-.209 .210-.229 .230-.249 .250-.269 .270-.289 .290-.309

Slotted Steel 82-14-080-16 82-14-100-16 82-14-120-16 82-14-140-16 82-14-160-16 82-14-180-16 82-14-200-16 82-14-220-16 82-14-240-16 82-14-260-16 82-14-280-16 82-14-300-16

Stainless Steel 82-14-080-20 82-14-100-20 82-14-120-20 82-14-140-20 82-14-160-20 82-14-180-20 82-14-200-20 82-14-220-20 82-14-240-20 82-14-260-20 82-14-280-20 82-14-300-20

Phillips Steel 82-28-080-16 82-28-100-16 82-28-120-16 82-28-140-16 82-28-160-16 82-28-180-16 82-28-200-16 82-28-220-16 82-28-240-16 82-28-260-16 82-28-280-16 82-28-300-16

Stainless Steel 82-28-080-20 82-28-100-20 82-28-120-20 82-28-140-20 82-28-160-20 82-28-180-20 82-28-200-20 82-28-220-20 82-28-240-20 82-28-260-20 82-28-280-20 82-28-300-20

'F' .375 .395 .415 .435 .455 .475 .495 .515 .535 .555 .575 .595

#82 Wing Head Studs - Convert to CLoc® 2000 Series Total Material Thickness .070-.089 .090-.109 .110-.129 .130-.149 .150-.169 .170-.189 .190-.209 .210-.229 .230-.249 .250-.269 .270-.289 .290-.309

Steel 82-12-080-16 82-12-100-16 82-12-120-16 82-12-140-16 82-12-160-16 82-12-180-16 82-12-200-16 82-12-220-16 82-12-240-16 82-12-260-16 82-12-280-16 82-12-300-16

Skybolt Aeromotive Corp

Stainless Steel 82-12-080-20 82-12-100-20 82-12-120-20 82-12-140-20 82-12-160-20 82-12-180-20 82-12-200-20 82-12-220-20 82-12-240-20 82-12-260-20 82-12-280-20 82-12-300-20

'F' .375 .395 .415 .435 .455 .475 .495 .515 .535 .555 .575 .595

Copyright 2017 Page 53

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev 041316

Southco 1/4 Turn Fasteners #85 Studs - Convert to CLocÂŽ 4000 Series Oval Head Slotted

Total Material Thickness .070-.089 .090-.109 .110-.129 .130-.149 .150-.169 .170-.189 .190-.209 .210-.229 .230-.249 .250-.269 .270-.289 .290-.309

Steel 85-11-080-16 85-11-100-16 85-11-120-16 85-11-140-16 85-11-160-16 85-11-180-16 85-11-200-16 85-11-220-16 85-11-240-16 85-11-260-16 85-11-280-16 85-11-300-16

Stainless Steel 85-11-080-20 85-11-100-20 85-11-120-20 85-11-140-20 85-11-160-20 85-11-180-20 85-11-200-20 85-11-220-20 85-11-240-20 85-11-260-20 85-11-280-20 85-11-300-20

Flush Head Slotted Steel 85-14-080-16 85-14-100-16 85-14-120-16 85-14-140-16 85-14-160-16 85-14-180-16 85-14-200-16 85-14-220-16 85-14-240-16 85-14-260-16 85-14-280-16 85-14-300-16

Stainless Steel 85-14-080-20 85-14-100-20 85-14-120-20 85-14-140-20 85-14-160-20 85-14-180-20 85-14-200-20 85-14-220-20 85-14-240-20 85-14-260-20 85-14-280-20 85-14-300-20

'F' .525 .545 .565 .585 .605 .625 .645 .665 .685 .705 .725 .745

Wing Head

Total Material Thickness .070-.089 .090-.109 .110-.129 .130-.149 .150-.169 .170-.189 .190-.209 .210-.229 .230-.249 .250-.269 .270-.289 .290-.309

Steel 85-12-080-16 85-12-100-16 85-12-120-16 85-12-140-16 85-12-160-16 85-12-180-16 85-12-200-16 85-12-220-16 85-12-240-16 85-12-260-16 85-12-280-16 85-12-300-16

Stainless Steel 85-12-080-20 85-12-100-20 85-12-120-20 85-12-140-20 85-12-160-20 85-12-180-20 85-12-200-20 85-12-220-20 85-12-240-20 85-12-260-20 85-12-280-20 85-12-300-20

'F' .525 .545 .565 .585 .605 .625 .645 .665 .685 .705 .725 .745

Retainers Split Ring Stainless

Push-On Stainless

Part# 82-32-101-20 85-34-101-20

CupWasher Nylon

Part# 82-32-201-20 85-34-201-20

Part# 82-46-101-39 85-46-101-39

Alt Part# NAS1515-H-4L NAS1515-H-5L

Receptacles #82 - 3/32 Rivets - .750 Spacing #85 - 1/8 Rivets - 1.0 Spacing

Leaf Spring with Base

Leaf Spring without Base

Part# 82-35-302-15 85-35-295-15 85-35-295-20

Part# 82-35-295-15 82-35-295-20

Skybolt Aeromotive Corp

Material Steel Steel Stainless

Copyright 2017 Page 54

Material Steel Stainless

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Rev

Revisions

By

Date

A

New Drawing

NCB

4/10/09

B

New Part#s

NCB

11/30/11

C

Added Steel designation

NCB

11/21/13

Example Part #s MS21078-3 12L14 Steel ASTM A29, A108 - Yellow Zinc plate MS21078-3A 6061 T651 Aluminum ASTM B221-12 - No plating Standard Anodizing per MIL-A-8625, Type II, Class 2: MS21078

Marking

AN366

MS21078-04

4

NA

NAS1023N04 #440 3/32 Rivets 11/16 Spacing 750 Axial Load

Add 'A' for Black Anodize (MS21078-04AA)

.0035

1.587

MS21078-06

6

AN366-F632

NAS1023N06 #632 3/32 Rivets 11/16 Spacing 1130 Axial Load

Add 'A' for Black Anodize (MS21078-06AA)

.0035

1.587

MS21078-08

2 or 8

AN366-F832

NAS1023N08 #832 3/32 Rivets 11/16 Spacing 1720 Axial Load

Add 'A' for Black Anodize (MS21078-08AA)

.0035

1.587

MS21078-3

3

AN366-F1032

NAS1023N3

#10-32 3/32 Rivets 11/16 Spacing 2460 Axial Load

Add 'A' for Black Anodize (MS21078-3AA)

.0035

1.587

MS21078-3-8

3

NA

NA

#10-32 1/8 Rivets 11/16 Spacing 2460 Axial Load

Add 'A' for Black Anodize (MS21078-3AA8)

.0035

1.587

MS21078-324

24 or 34

#10-24 3/32 Rivets 11/16 Spacing 2460 Axial Load

Add 'A' for Black Anodize (MS21078-324AA)

.0035

1.587

MS21078-324-8

24 or 34

#10-24 1/8 Rivets 11/16 Spacing 2460 Axial Load

Add 'A' for Black Anodize (MS21078-324AA8)

.0035

1.587

MS21078-420-8S

20

1/4-20 1/8 Rivets 11/16 Spacing(S) 4580 Axial Load

Add 'A' for Black Anodize (MS21078-420AA8S)

.0045

2.041

MS21078-420-8L

20

1/4-20 1/8 Rivets 1.00 Spacing(L) 4580 Axial Load

Add 'A' for Black Anodize (MS21078-420AA8L)

.0045

2.041

MS21078-428-L

28

AN366-F428

NAS1023N4

1/4-28 3/32 Rivets 1.00 Spacing(L) 4580 Axial Load

Add 'A' for Black Anodize (MS21078-428AAL)

.0055

2.041

MS21078-428-8S

28

NA

NA

1/4-28 1/8 Rivets 11/16 Spacing(S) 4580 Axial Load

Add 'A' for Black Anodize (MS21078-428AA8S)

.0055

2.041

MS21078-428-8L

28

NA

NA

1/4-28 1/8 Rivets 1.00 Spacing(L) 4580 Axial Load

Add 'A' for Black Anodize (MS21078-428AA8L)

.0055

2.041

NA

NAS1032

NA

Lbs (alum) Grams (alum)

Bold indicates normally stocked in steel. Shaded indicates normally stocked in aluminum.

Material

Alum - 6061 T651 ASTM B221-12 Steel - 12L14 ASTM A29, A108

Scale Weight

Heat Treatment

None

Drawn by:

NA C.Osorios

Skybolt Aeromotive Corporation 9000 Airport Blvd Leesburg, FL 34788 Title

Platenut - Nylon Insert

Checked by: N. Bowers

Finish Tolerances Unless Otherwise Specified Surface Finish

Anodize (Option) MIL-A-8625 TypeII, Class2 Black. Steel - Yellow Zinc ASTM-B-633 2 Place Dec. +/- .02 3 Place Dec. +/- .010 125 Unless Specified

Angular Dimensions +/- 1 Deg

Drawing No

MS21078

C

This document is proprietary and confidential and it may not be copied. Upon written request, it must be returned to Skybolt Aeromotive Corp.

All structural designs, technical data, and engineering services represented thereby and originated or rendered herein are considered to be trade secrets which are exclusive property of Skybolt Aeromotive Corp. and any reproduction, disclosure, or use is prohibited except with express written consent of Skybolt Aeromotive Corp.

Page 54.1

Skybolt MS21078 Skytanium Series Platenut Meet or Exceed Steel Axial Strength (LBS)

H

T Part#

G Dia

K

Prior to

H

E Prior

Thread

A

B

C +/-.005

F Min

+/-.010

Rivet

Crimp

Final

J

V

D

to Crimp

MS21078-04

4-40 UNJC-3B

.970

.404

.344

.115

.200

3/32

.230

.215

11/16

.068

.373

L

MS21078-06

6-32 UNJC-3B

.970

.404

.344

.115

.200

3/32

.270

.255

11/16

.068

.373

MS21078-08

8-32 UNJC-3B

.970

.404

.344

.115

.200

3/32

.300

.285

11/16

.068

.373

.090

.290

MS21078-3

10-32 UNJF-3B

.970

.404

.344

.115

.200

3/32

.314

.295

11/16

.068

.373

.125

.305

MS21078-3-8

10-32 UNJF-3B

.970

.406

.344

.115

.200

1/8

.314

.295

11/16

.068

.373

.125

.305

MS21078-324

10-24 UNJC-3B

.970

.406

.344

.115

.200

1/8

.314

.295

11/16

.068

.373

.125

.305

MS21078-324-8

10-24 UNJC-3B

.970

.406

.344

.115

.200

1/8

.314

.295

11/16

.068

.373

.125

.305

MS21078-420-8S

1/4-20 UNJC-3B

.970

.406

.344

.115

.200

1/8

.314

.295

11/16

.068

.373

.380

MS21078-420-8L

1/4-20 UNJC-3B

1.296

.516

.500

.115

.200

1/8

.375

.250

1.000

.068

.465

.380

MS21078-428-L

1/4-28 UNJF-3B

1.296

.516

.500

.115

.200

1/8

.375

.250

1.000

.068

.465

.380

MS21078-428-8S

1/4-28 UNJF-3B

.970

.406

.344

.115

.200

3/32

.375

.250

11/16

.068

.465

.380

MS21078-428-8L

1/4-28 UNJF-3B

1.296

.516

.500

.115

.200

1/8

.375

.250

1.000

.068

.465

.380

C Page 54.2

Rev 031017

Skybolt Stainless Cowling Fastener Replacement Kits (TSO-C148) Stainless Cowling Kits replace the old, worn and rusted parts originally installed on your cowlings and access panels with exclusive Skybolt CLoc®, ZLoc®, or ALoc® style stainless fasteners. Many kits depicted may only replace certain portions of the engine cowling. Optional kits to complete all panels are available.

The unique Skybolt Cowling Fastener Replacement Kits were developed over a span of 5 to 6 years utilizing Parts Manuals (IPC), field research, and customer feedback. We soon discovered that the Parts Manuals were very inaccurate and relied more on field experience. Despite exhaustive data, we also discovered that no two aircraft were ever the same. The Skybolt Cowling Fastener Kits will usually contain more of a selection than the aircraft may actually require so that a replacement project can efficiently move from start to finish. Like the Trim and Fuel Tank Kit development, many companies began to copy the Skybolt Cowling Kit product line only to discover just how difficult it is to understand each and every production aircraft produced from the 1940s to date. Without the supporting data to back up the fasteners required on most aircraft, the copy kits can supply about 70% of the required hardware.

Skybolt’s goal is 100% in all of our kits. Cowlings are our business. As many of these kits can cost hundreds of dollars, you deserve the best product on the market and a company that can stand by your investment for as long as you own the aircraft.

Skybolt Stainless Cessna Cowling Conversion Kits (STC’d) Skybolt 2800 Series Kits convert early Screw Cowlings to the Skybolt developed CLoc® SK25S4S Fastener. Skybolt 203 Series Kits convert all Platemount Cowlings to the CLoc® SK40S5 Fastener. Skybolt 4th Generation Conversion Kits (Southco® to CLoc®) utilize the GenIV SK2003-42A Platemount (patent 7,997,843 and 8,282,329) with SK245-4 Series Adjustable Receptacles. With 35 years experience maintaining these cowlings, our developments address the “flex” feature unique to the J7444-42 Lord® mounts; our template based alignment process; and our (patented) SK2003-AW4 Camwashers easily position mounts for alignment in even extreme applications.

Skybolt Stainless Beech Bonanza Cowling Replacement and Conversion Kits (STC’d) Skybolt Stainless Bonanza Kits offer direct component replacement for Dzus® Fasteners in the Upper Cowl and/or the Airloc® Fasteners in the Lower Cheek Cowling. Bonanza Conversion Kits replace old school Dzus® and Airloc® Fasteners with CLoc® Fasteners for much improved performance and appearance. STCd for TC A777 & 3A15.

Skybolt Stainless Trim Kits

Trim Kits were created in the early 1980s as a convenient and cost effective hardware selection for non-structural exterior access panels and fairings. Note: Some aircraft depict structural panels (Some Mooney and KingAir wing panels). Skybolt supplies structural steel (AN509 Series) screws for these panels as AN509 stainless screws are not structural equivalent to the steel AN509 screws.

Skybolt Stainless Fuel Tank Kits

Fuel Tank Kits offer the structural (and non-structural) screws common to fuel tanks in most production aircraft. Kits are sold Per Tank (1 Tank per Kit)

The following charts depict most production aircraft with cross reference to most panel specific kits offered by Skybolt.

Skybolt Aeromotive Corp

Copyright 2017 Page 55

Pricing Subject to Change Refer to www.skybolt.com for current revision

031017

Cowling Fastener Replacement Kits - Production Aircraft COMMANDER COWLING KITS Cowling Kit AC500-C1 AC500-C1P AC500-C2 AC500-C2P AC500-C2A AC500-C2AP AC500-C3 AC500-C3P AC500-C4 AC500-C4P

500,520,560,720 680, 680E Round Cowl 500A,B,U,560F,680 560FP,FL,FLP Flat Cowl 685 500S Shrike 690 72-85 695 80-85 Options AC690-NA1S AC690-NA1P

Serial # All 52-60 All 60-69 12000 thru 12066 72-74 1755 thru 3327 68-80 11001 thru 11565, 15001 thru 15042 95000 thru 95084, 96000 thru 96208

BEECH COWLING KIT Cowling Kit Model BM-C1 BM-C1P BM-C2 BM-C2P B35UC530

Options B35LC2090 Options B35LC5080

Options B35LC5100

Options B35UC40S B35UC40P B35LC27S B35LC28P B35LC40S B35LC40P

Skybolt Aeromotive Corp

Serial # Muskwteer23,A,B,24 M901-1284 63-69, MA1-MA363 66-69 Sport 150 MB1-480 Later Musketeer,Sport, M1285 On,MA364 On, MB481-905, Sundowner, Sierra M1362-2392, MC2 On 33 CD1-CD1234 60-67 C33A,E33A CE1-CE289 66-69 35 D1 thru 9068 47-69 See B35UC40S Stainless CLoc Conversion Slotted See B35UC40P Stainless CLoc Conversion Phillips 33 CD1 thru 350 60-67 35 D1 thru 6567 47-61 See B35LC28S Stainless CLoc Conversion Slotted See B35LC28P Stainless CLoc Conversion Phillips 33 CD351-CD1304 61-67 C33A,E33A,F33A CE1-On 66-87 F33C CJ26 On 70 N35-V35A D6568-9068 61-69 36 E1-E424 68-73 See B35LC40S Stainless CLoc Conversion Slotted See B35LC40P Stainless CLoc Conversion Phillips V35B D9069 On 70-82 36 E425 On 73-87 36TC EA1 On 79-87 See B35LC40S Stainless CLoc Conversion Slotted See B35LC40P Stainless CLoc Conversion Phillips 33 All 35 D1 thru 9068 33 All 35 D1 thru 9068 33 CD1 thru 350 35 D1 thru 6567 33 CD1 thru 350 35 D1 thru 6567 33 CD351 On 35 D6568 On 33 CD351 On 35 D6568 On

Copyright 2016 Pages 56-63

Description Engine Cowlings CLoc Slotted Engine Cowlings CLoc Phillips Engine Cowlings CLoc Slotted Engine Cowlings CLoc Phillips Engine Cowlings CLoc Slotted Engine Cowlings CLoc Phillips Engine Cowlings CLoc Slotted Engine Cowlings CLoc Phillips Engine Cowlings CLoc Slotted Engine Cowlings CLoc Phillips Nose Access Panels CLoc Slotted Nose Access Panels CLoc Phillips

Description Engine Cowlings Cloc Slotted Engine Cowlings Cloc Phillips Engine Cowlings Slotted Engine Cowlings Phillips Upper SKAJ5 Stainless Replacement

Lower Airloc Stainless Replacement

Lower Airloc Stainless Replacement

Lower Airloc Stainless Replacement

Upper SK4002S Slotted Conversion Upper SK40S5S Phillips Conversion Lower SK2700S Slotted Conversion Lower SK27S3S Phillips Conversion Lower SK4002S Slotted Conversion Lower SK40S5S Phillips Conversion

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

031017

BEECH COWLING KIT - Continued Cowling Kit Model B50-C1 B55-C1 B55-C1P

All B50 Twin Bonanza All 55 Baron Baron 58P & TC Options B55-NC B55-EP B55-NP1 B55-EPD B55-RAD B55-BD B55-FG B55-AFP B55-AS1 B55-AS2

B55-C2 B55-C2P

B56-C1 B56-C1P

B60-C1 B60-C1P

Baron 58P & TC Options B55-NP1 B55-EPD B55-RAD B58P-AS1 Baron 56TC Baron 56TC Options B55-NC B55-NP2 B55-EPD B55-RAD B55-AS3 Duke

B76-C1 B76-C1P B95-C1

Options B60-LP1S B60-LP1P B60-LP2S B60-LP2P Dutchess Dutchess Travel Air 95

VIK-C1

Options B55-NC B95-AFP B55-RAD B55-RAD B95-NAP Bellanca Viking

CESSNA COWLING KIT Cowling Kit Model C150 C150-C1 C150-C1P

C152-C1 C152-C1P C152-C2 C152-C2P C172 C172-C1 C172-C1P

C172-C2 C172-C2P

150-150F C150G-M, A150

Serial # H1 thru DH347 52-62 All 61-82

B55 Only

TE-1 thru TE-451 Only

C,D,E TE-1 thru TE-1078 Only B58 TH-1 thru TH-740 E55 TE-1079 Up B58 TH-741 Up 58P/TC TJ3 On, TK1 On 76-86

TG-1 thru TG-94 67-71

P4-P597 68-82 P4-144 P145-246 ME-1 thru ME-437 78-82 TD-2 thru TD722 58-68 Some Serial Numbers TD-1 thru 302 TD-534 thru 614 TD-615 On TD-615 On 300000 thru 301031 67-01

81196-86035, 0780-1049 Late 78-86

C172-172G 28000-54892 56-66 C172H-P 54893-75034 67-81 C172H-P Options C100-EAD3 C100-EAD4 No STC SK2003-14-11 See SK203C172P Conversion Kits C172P,Q 75035-76079,75869-76079 82-83 Options SK2003-14-11 See SK203C172PQ Conversion Kits

Skybolt Aeromotive Corp

Air Scoops #2 and #5 ALoc Engine Side Panels Slotted Engine Side Panels Phillips Nacelle Panels #4 ZLoc External Power Door #4 ZLoc Radome #5 ALoc Air Scoops #4 ZLoc Engine Side Panels Slotted Engine Side Panels Phillips Lower Nose Cowling #5 ZLoc Nacelle Panels #2 ALoc External Power Door #4 ZLoc Radome #5 ALoc Air Scoops #2 and #5 ALoc Engine Side Panels Slotted Engine Side Panels Phillips Lower Panels Slotted Lower Panels Phillips Lower Panels Slotted Lower Panels Phillips Engine Side Panels Slotted Engine Side Panels Phillips Engine Cowling Latch Studs, Scoop, Access Door Nose Access Door Latch Studs, L Rear Fuselage Lower Nose Cowling #5 ZLoc Aft Fuselage Panels #5 ALoc Radome #5 ALoc Radome #5 ALoc Nose Access Panel Engine Cowling CLoc Slotted Engine Cowling CLoc Phillips February 19, 2014

Serial# 17001-64532 59-66 64533-79406 67-77

Options SK2003-14-10 See SK203C150P Conversion Kits C152, A152 79406-81195, 0735-0779 Early 78 C152, A152

Description Cowling,Air Filter,All Covers - Zloc and Aloc Engine Side Panels - Slotted Engine Side Panels - Phillips Lower Nose Cowling #5 ZLoc Filter Access Panels #4 ZLoc Nacelle Panels #4 ZLoc External Power Door #4 ZLoc Radome #5 ALoc Baggage Door #5 ALoc Wing Fuel Gauge Panels #5 ALoc Aft Fuselage Panel #5 ALoc Air Scoops #2 and #5 ALoc

Copyright 2016 Pages 56-63

Description See C150C2800P Conversion Kit Engine Cowling Slotted Engine Cowling Phillips 10 ea SK2003-14A Mounts Engine Cowling Slotted Engine Cowling Phillips Engine Cowling/Ext Pwr Slotted Engine Cowling/Ext Pwr Phillips See C172C2800P Engine Cowling Slotted Southco Engine Cowling Phillips Southco Engine Access Door Kit (Original) Engine Access Door Kit (CLoc Conv) 11 ea SK2003-14A Mounts Engine Cowling/Ext Pwr Slotted Southco Engine Cowling/Ext Pwr Phillips Southco 11 ea SK2003-14A Mounts

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

031017

CESSNA COWLING KIT - Continued C172-C3 C172-C3P

C172-C4 C172-C4P C172-C5 C172-C5P

C172-C6 C172-C6P C172-C8 C175 C177-C1 C177-C1P

C180 C180-C1 C180-C1P

C180-C2 C180-C2P

C182 C182-C1 C182-C1P

C182-C2 C182-C2P

C182-C3 C182-C3P

C182-C4 C182-C4P

C182-C5 C182-C5P

C182-C6 C182-C6P C182-C7 C182-C7P

C172P,Q

76080-76516 84-86

Options SK2003-24-11 See SK203C172PQ Conversion Kits C172P 76517 On 86-On HawkXP,XPII

R172-2000-3454 77-81

Options SK2003-14-13 See SK203C172PXP Conversion Kits Cutlass RG All 80-85 C172R & S 80001-On, 8001 On 96 On Options SK2003-42-11 C175 All 58-62 C177 All 71-81 C177RG All Options SK2003-14-14 See SK203C177P Conversion Kits C180-180C 30002-50911 53-60 C180 50912-52284 61-72 C185 0001-02090 Options C100-EAD5 C100-EAD4 No STC C100-AF1 C100-EPD1S C100-EPD1P C180 52285-53203 73-85 C185 02091 On Options C100-EAD5 C100-EAD4 No STC C100-AF1 C100-EPD1S C100-EPD1P C182-182C 33000-53007 53-60 C182 53008-53598 61 Options C100-AF1 C100-EPD1S C100-EPD1P C182E-M

53599-60055

Options C100-EPD1S C100-EPD1P C182N-P

60056-61425 70-72

Options C100-EPD1S C100-EPD1P C182P-R

61426 On 73-86

62-69

Options C100-EPD1S C100-EPD1P SK2003-24-14 See SK203C182P Conversion Kits T182,R,TR,RG All 78-86 Options C100-EPD1S C100-EPD1P 182, 182T Non-Turbo Options SK2003-42-14 T182 Turbo Options SK2003-42-14

Skybolt Aeromotive Corp

80001-On 97-On

08001-On 97-On

Copyright 2016 Pages 56-63

Description Engine Cowling Slotted 2700/4002 Engine Cowling Phillips 2700/4002 11 ea SK2003-24A Mounts Engine Cowling Slotted Engine Cowling Phillips Engine Cowling/Ext Pwr Slotted Engine Cowling/Ext Pwr Phillips 13 ea SK2003-14A Mounts Engine Cowling Slotted Engine Cowling Phillips Eng Cowling/Air Box/Ext Pwr Phillips 11 ea SK2003-42A Mounts See C175C2800P Conversion Kit Engine Cowling Slotted Southco Engine Cowling Phillips Southco 14 ea SK2003-14A Mounts See C180C2800P Conversion Kit Engine Cowling Slotted Engine Cowling Phillips Engine Access Door (Original) Engine Access Door (CLoc Conv) Air Filter Kit External Pwr Door (Slotted) External Pwr Door (Phillips) Engine Cowling Slotted Engine Cowling Phillips Engine Access Door (Original) Engine Access Door (CLoc Conv) Air Filter Kit External Pwr Door (Slotted) External Pwr Door (Phillips) See C182C2800P Conversion Kit Engine Cowling Slotted Engine Cowling Phillips Air Filter Kit External Pwr Door (Slotted) External Pwr Door (Phillips) Engine Cowling Slotted Engine Cowling Phillips External Pwr Door (Slotted) External Pwr Door (Phillips) Engine Cowling Slotted Engine Cowling Phillips External Pwr Door (Slotted) External Pwr Door (Phillips) Engine Cowling Slotted Engine Cowling Phillips External Pwr Door (Slotted) External Pwr Door (Phillips) 14 ea SK2003-24A Mounts Engine Cowling Slotted Engine Cowling Phillips External Pwr Door (Slotted) External Pwr Door (Phillips) Eng Cowling/Filter Frame Slotted Eng Cowling/Filter Frame Phillips 14 ea SK2003-42A Mounts Eng Cowling/Filter Frame Slotted Eng Cowling/Filter Frame Phillips 11 ea SK2003-42A Mounts

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

031017

CESSNA COWLING KIT - Continued C188-C1 C188-C1P

C205-C1 C205-C1P

C206-C1 C206-C1P

C206-C2P C207-C1 C207-C1P

C208-C1P C210-C1 C210-C1P C210-C2 C210-C2P C210-C3 C210-C3P C210-C4 C210-C4P C303-C1 C303-C1P C310-C1 C310-C1P

C310-C2 C310-C2P

C310-C3 C310-C3P

C310-C5 C310-C5P

C336-C1 C336-C1P C337-C1 C337-C1P

C340-C1 C340-C1P

C188

All 66-83

C100-EPD1S C100-EPD1P C188-RSP1 C205 C206 U,TU206 TP206 Options C200-2800 C200-28S3 U206,TU

0001-0577 63-64 0001-0275 64 0276-06846 65-84 0191-0647 65-70 No STC No STC 06847 On 85-86

Options C200-2800 C200-28S3 C206, T206 C207,T207

No STC No STC 08000-On 97-On 00001-00788 69-84

Options C200-2800 C200-28S3 C208 C210,A-N T210F-L C210L-N With A/C T210N P210N T210R P210R C210R

No STC No STC All 85-On 57001-64535 60-73 0001-60089 60090-64897 74-84 60090-64897 74-84 00001-00834 78-83 64898-65009 85-86 0835-0874 85-86 64898-65009 (no Turbo) 85-86

C303 Crusader

00001-00315 82-84

C310

35000-35546 54-57

Options C300-BA1 C300-OAD1S C300-OAD1P C310B,C,D

35655-39299 58-60

Options C300-BA1 C300-OAD1S C300-OAD1P C310E-Q (No Turbo) C320A-F (Turbo) Options C300-BA3 C300-NA1S C300-NA1P C300-OAD1S C300-OAD1P C310P,Q (Turbo),R

All P,Q(Turbo),R 69-81

Options C300-BA3 C300-NA1S C300-NA1P C336

No C310R No C310R 0001-0195 63-64

C337 C337P Options C300-NA2 C300-NA3S C300-NA3P C340,A

All SN 61-74 All SN 62-68 K thru Q Only K thru Q Only

0002-01951 65-80 0001-0356 1965-1972 F Model 1973-1980 G-On 0001-1817 72-84

Options C300-NA4S C300-NA4P

Skybolt Aeromotive Corp

Copyright 2016 Pages 56-63

Description Engine Cowling - Slotted Engine Cowling - Phillips External Pwr Door (Slotted) External Pwr Door (Phillips) Fuselage ZLoc Engine Cowling/Ext Pwr Door - Slotted Engine Cowling/Ext Pwr Door - Phillips

Belly Panel (CLoc Conv-Slotted) Belly Panel (CLoc Conv-Phillips) Engine Cowling/Ext Pwr - Slotted Engine Cowling/Ext Pwr - Phillips Belly Panel (CLoc Conv-Slotted) Belly Panel (CLoc Conv-Phillips) Engine Cowling/All Panels - Phillips Engine Cowling/Ext Pwr - Slotted Engine Cowling/Ext Pwr - Phillips Belly Panel (CLoc Conv-Slotted) Belly Panel (CLoc Conv-Phillips) Phillips Engine Cowling/Ext Pwr Slotted Engine Cowing/Ext Pwr Phillips Engine Cowling/Ext Pwr Slotted Engine Cowing/Ext Pwr Phillips Engine Cowling/Ext Pwr Slotted Engine Cowing/Ext Pwr Phillips Engine Cowling/Ext Pwr Slotted Engine Cowing/Ext Pwr Phillips Engine Cowlings Slotted Engine Cowlings Phillips Eng Cowlings/Oil Door/Access Door Slotted Eng Cowlings/Oil Door/Access Door Phillips Battery Access Panel Oil Access Door - Slotted Oil Access Door - Phillips Eng Cowlings/Oil Door/Access Door Slotted Eng Cowlings/Oil Door/Access Door Phillips Battery Access Panel Oil Access Door - Slotted Oil Access Door - Phillips Eng Cowlings/Oil Door/Access Door Slotted Eng Cowlings/Oil Door/Access Door Phillips Battery Access Panel Nose Access Panel - Slotted Nose Access Panel - Phillips Oil Access Door - Slotted Oil Access Door - Phillips Eng Cowlings/Access Door Slotted Eng Cowlings/Access Door Phillips Battery Access Panel Nose Access Panel - Slotted Nose Access Panel - Phillips Engine Cowlings Slotted Engine Cowlings Phillips Eng Cowlings/Ext Pwr/Access Door Slotted Eng Cowlings/Ext Pwr/Access Door Phillips Avionics Panel Avionics Panel - Slotted Avionics Panel - Phillips Engine Cowlings - Collared Slotted Engine Cowlings - Phillips Nose Access Panel - Slotted Nose Access Panel - Phillips

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

031017

CESSNA COWLING KIT - Continued C400-C1 C400-C1P

C400-C2 C400-C2P Options

C401,A 402,A Options C400-NF1 C400-BA1S C400-BA1P C400-NP1S C400-NP1P C400-NP2S C400-NP2P C400-NP3S C400-NP3P C402C

C414-C2 C414-C2P

C421-C1 C421-C1P

67-78

402A0001-0046 402A0047-On 402B 402C0001-0808 79-85

C400-NF1 C400-BA1S C400-BA1P C400-NP4S C400-NP4P C400-NP5S C400-NP5P C404 Titan

0001-0859 77-81

Options C400-BA2S C400-BA2P C400-CP1S C400-CP1P C400-NP4S C400-NP4P C400-NP5S C400-NP5P C414, 414 II

0001-0965 70-77

C404-C1 C404-C1P

C414-C1 C414-C1P

All

Options C400-NF1 C400-BA1S C400-BA1P C400-CP2S C400-CP2P C400-NP6S C400-NP6P C400-NP7S C400-NP7P C414A Chancellor C414A III Options C400-NF1 C400-BA1S C400-BA1P C400-CP2S C400-CP2P C400-NP6S C400-NP6P C400-NP7S C400-NP7P C411,421,A,B

0001-1212 78-85

0001-0970 68-75

Options C400-RAD1S C400-RAD1P C400-BA2S C400-BA2P C400-NP8S C400-NP8P

Skybolt Aeromotive Corp

Copyright 2016 Pages 56-63

Description Engine Cowlings/Oil Access Door Slotted Engine Cowlings/Oil Access Door Phillips Nacelle Panels & Fairing Battery Access Panel - Slotted Battery Access Panel - Phillips Nose Panel - Slotted Nose Panel - Phillips Nose Panel - Slotted Nose Panel - Phillips Nose Panel - Slotted Nose Panel - Phillips Engine Cowlings Slotted Engine Cowlings Phillips Nacelle Panels & Fairing Battery Access Panel - Slotted Battery Access Panel - Phillips Nose Panel - Avionics Door - Slotted Nose Panel - Avionics Door - Phillips Nose Panel - No Avionics Door - Slotted Nose Panel - No Avionics Door - Phillips Engine Cowlings Slotted Engine Cowlings Phillips Inverter/Battery Panel Slotted Inverter/Battery Panel Phillips Bottom Cowling Panels Slotted Bottom Cowling Panels Phillips Nose Panel with Avionics Door Slotted Nose Panel with Avionics Door Phillips Nose Panel with no Avionics Door Slotted Nose Panel with no Avionics Door Phillips Engine Cowlings Slotted Engine Cowlings Phillips Nacelle Panels & Fairing Inverter/Battery Panel Slotted Inverter/Battery Panel Phillips Bottom Cowling Panels Slotted Bottom Cowling Panels Phillips Nose Panel with Avionics Door Slotted Nose Panel with Avionics Door Phillips Nose Panel with no Avionics Door Slotted Nose Panel with no Avionics Door Phillips Engine Cowlings Slotted Engine Cowlings Phillips Nacelle Panels & Fairing Inverter/Battery Panel Slotted Inverter/Battery Panel Phillips Bottom Cowling Panels Slotted Bottom Cowling Panels Phillips Nose Panel with Avionics Door Slotted Nose Panel with Avionics Door Phillips Nose Panel with no Avionics Door Slotted Nose Panel with no Avionics Door Phillips Engine Cowlings/Oil Doors Slotted Engine Cowlings/Oil Doors Phillips Radome Slotted Radome Phillips Battery Access Panel Slotted Battery Access Panel Phillips Nose Panel - No Avionics Door Slotted Nose Panel - No Avionics Door Phillips

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

031017

CESSNA COWLING KIT - Continued C421-C2 C421-C2P

C425-C1 C425-C1P

C441-C1 C441-C1P

C500-C1 C500-C1P C500-C2 C500-C2P

C421C Options C400-OD1S C400-OD1P C400-BA2S C400-BA2P C400-NP6S C400-NP6P C400-NP7S C400-NP7P C425 Options C400-NP6S C400-NP6P C400-NP7S C400-NP7P C441 Options C400-NP6S C400-NP6P C400-NP7S C400-NP7P CIT I,II CIT III

CHAMP-CITABRIA-DECATHLON Cowling Kit CIT-C1

DEK-C1S DEK-C1P

Champ and Citabria Options CIT-4000S CIT-4000P Decathlon

MERLIN COWLING KITS Cowling Kit MERLIN-C1 MERLIN-C1P

MERLIN-C2 MERLIN-C2P

IIA SA26AT Options MER-NP1S MER-NP1P IIIA SA226-T

0001-1807 76-85

Conquest I & Corsair(PT6) 81-86 425-0001-0236

Conquest, II(TPE-331) 78-86 441-0001-0362

All

72-94

0002-0206 83-91

Serial # All No STC No STC All

Description Engine Cowling Southco Slotted Engine Cowling Cloc Conversion Slotted Engine Cowling Cloc Conversion Phillips Engine Cowling CLoc Slotted Engine Cowling CLoc Phillips

Serial # T26-100 thru 180 68-70

Description Engine Cowlings CLoc Slotted Engine Cowlings CLoc Phillips Nose Panel Cloc Slotted (if installed) Nose Panel Cloc Slotted (if installed) Engine Cowlings CLoc Slotted Engine Cowlings CLoc Phillips Nose Panel Cloc Slotted (if installed) Nose Panel Cloc Slotted (if installed)

T-200 thru 536 70-86

Options MER-NP1S MER-NP1P

MITSUBISHI COWLING KITS Cowling Kit DIAMOND-C2S DIAMOND-C2P MU2-C1 MU2-C1P MU2-C2 MU2-C2P

MU2B-P/Solitaire

Serial # A003 thru A091,A1001 thru A1008 82-85 6 thru 459 67-85

MU2 Marquise

700 thru 1569 79-85

Diamond Jet

MOONEY COWLING KITS Cowling Kit M20-C2 M20-C2P

1965 M20

Serial # C,D,E,F 65

Description Engine Cowlings CLoc Slotted Engine Cowlings CLoc Phillips Engine Cowling/Wing Panels CLoc Slotted Engine Cowling/Wing Panels CLoc Phillips Engine Cowling/Wing Panels CLoc Slotted Engine Cowling/Wing Panels CLoc Phillips

Description Engine Cowling CLoc Slotted Engine Cowling CLoc Phillips Battery Access Panel Southco Slotted Battery Access Panel Southco Phillips

Options M20-BAT1S M20-BAT1P

Skybolt Aeromotive Corp

Description Engine Cowlings Slotted Engine Cowlings Phillips Oil Drain Door Slotted Oil Drain Door Phillips Inverter/Battery Panel Slotted Inverter/Battery Panel Phillips Nose Panel with Avionics Door Slotted Nose Panel with Avionics Door Phillips Nose Panel with no Avionics Door Slotted Nose Panel with no Avionics Door Phillips Engine Cowlings Slotted Engine Cowlings Phillips Nose Panel with Avionics Door Slotted Nose Panel with Avionics Door Phillips Nose Panel with no Avionics Door Slotted Nose Panel with no Avionics Door Phillips Engine Cowlings Slotted Engine Cowlings Phillips Nose Panel with Avionics Door Slotted Nose Panel with Avionics Door Phillips Nose Panel with no Avionics Door Slotted Nose Panel with no Avionics Door Phillips Engine Cowlings Slotted Engine Cowlings Phillips Engine Cowlings Slotted Engine Cowlings Phillips

Copyright 2016 Pages 56-63

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

031017

MOONEY COWLING KIT - Continued M20-C3 M20-C3P

M20-C5 M20-C5P

M20-C6 M20-C6P

M20-C6A M20-C6AP

M20-C7 M20-C7P

1966 On M20

C,D,E,F,G 66-On

Options M20-BAT1S M20-BAT1P 201

24-0001-1458 77-84

Options M20-BAT1S M20-BAT1P M20-BP1S M20-BP1P 201

24-1459 On 77-87

Options M20-BAT2S M20-BAT2P M20-BP1S M20-BP1P 231

25-0001 On 79-85

Options M20-BAT1S M20-BAT1P M20-BP1S M20-BP1P 252

All 85-On

Options M20-BAT2S M20-BAT2P

PIPER COWLING KITS Cowling Kit Model PA18-C1 PA18-C2 PA18-C3 PA23-C1 PA23-C1P PA23-C2 PA23-C2P

PA23-C3

PA23-C4 PA23-C4P

PA28-C1 PA28-C1P

Super Cub Super Cub Super Cub PA23-150 PA23-160 PA23-235 PA23-250 Options PA-NP1S PA-NP1P PA-NP2S PA-NP2P PA-NP3S PA-NP3P PA-FD1W PA23-250, Early C Options PA-NP2S PA-NP2P PA-NP3S PA-NP3P PA-FD1W PA23-250, Later C-F Options PA-NAC1S PA-NAC1P PA-NP2S PA-NP2P PA-NP3S PA-NP3P PA-FD1W PA28-201T, PA28RT-201T

Skybolt Aeromotive Corp

Description Engine Cowling CLoc Slotted Engine Cowling CLoc Phillips Battery Access Panel Southco Slotted Battery Access Panel Southco Phillips Engine Cowling CLoc Slotted Engine Cowling CLoc Phillips Battery Access Panel Southco Slotted Battery Access Panel Southco Phillips Belly Access Panel CLoc Slotted Belly Access Panel CLoc Phillips Engine Cowling CLoc Slotted Engine Cowling CLoc Phillips Battery Access Panel CLoc Slotted Battery Access Panel CLoc Phillips Belly Access Panel CLoc Slotted Belly Access Panel CLoc Phillips Engine Cowling CLoc Slotted Engine Cowling CLoc Phillips Battery Access Panel Southco Slotted Battery Access Panel Southco Phillips Belly Access Panel CLoc Slotted Belly Access Panel CLoc Phillips Engine Cowling CLoc Slotted Engine Cowling CLoc Phillips Battery Access Panel CLoc Slotted Battery Access Panel CLoc Phillips

Serial #

Description

105 HP 50-83 125 Up HP 50-83 Continental 50-83 PA23-5 thru 23-1163 54-57 PA23-1164 thru 23-2040 58-62 PA27-505 thru 622 62-65 PA27-3 thru 27-2504 60-64 Apache & Aztec No Six Place

Engine Side Panels Slotted Engine Side Panels Slotted Engine Side Panels Slotted Engine Cowling/Oil Door/Fuel Drain Slotted Engine Cowling/Oil Door/Fuel Drain Phillips Engine Cowling/Oil Door/Fuel Drain Slotted Engine Cowling/Oil Door/Fuel Drain Phillips Nose Panels Slotted Nose Panels Phillips Nose Panels Slotted Nose Panels Phillips Nose Panels Slotted Nose Panels Phillips Fuel Doors Wing Eng Cowling/Fuel Drain - Southco Slotted Nose Panels Slotted Nose Panels Phillips Nose Panels Slotted Nose Panels Phillips Fuel Doors Wing Eng Cowling/Fuel Drain - CLoc Slotted Eng Cowling/Fuel Drain - CLoc Phillips Nacelle Panels Slotted Nacelle Panels Phillips Nose Panels Slotted Nose Panels Phillips Nose Panels Slotted Nose Panels Phillips Fuel Doors Wing Engine Cowling CLoc Slotted Engine Cowling CLoc Phillips

Aztec Six Place No Ice Shields Aztec Six Place With Ice Shields

PA27-2505 thru PA27-2736 64 No Ice Shields With Ice Shields

27-2737-4866,7304917-8154029 C - early E 64-72, later E - F 73-81 SN 27-4426, 27-4574 On No Ice Shields With Ice Shields

All 77-78 All 79-80

Copyright 2016 Pages 56-63

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

031017

PIPER COWLING KITS - Continued Cowling Kit Model PA30-C1

PA30-C2 PA30-C2P

PA32-C1 PA32-C1P PA34-C2 PA34-C2P

PA34-C3 PA34-C3P

PA34-C4 PA34-C4P

PA44-C1 PA44-C1P PA46-C1 PA46-C1P PA600-C1 PA600-C1P PA700-C1 PA700-C1P

PA30 T Comanche Options PA30-NP1 PA30-2701S PA30-2701P PA30-2702S PA30-2702P PA30,39 Options PA30-NP1 PA30-2702S PA30-2702P PA32-301T Saratoga PA32R-301T Saratoga PA34-200T Seneca II Options PA34-OPTIONS-1S PA34-OPTIONS-1P Seneca II,III,IV

Serial # 30-1 thru 793, 799 thru 901 63-65 No STC No STC No STC No STC 794-798,902 Up, PA39-1 thru 155 PA30 65-69, PA39 70-72 No STC No STC All 80-On 7570001-7970001 75-78

II 34-7970002-8170092, III 34-8133001 34-48033, IV All

Options PA34-OPTIONS-1S PA34-OPTIONS-1P Seneca V

7970002 Up 79-93

Options PA34-OPTIONS-4S PA34-OPTIONS-4P Seminole

All 79-On

Skybolt Aeromotive Corp

Malibu

All 84-On

PA60-600 Aerostar PA601P, 602P PA60-700P Aerostar

PA60-3 thru 836521 68-83 PA60-8423001 Up 83-84

Copyright 2016 Pages 56-63

Description Engine Cowling Southco Slotted Nose Panel Southco Slotted Engine Cowling CLoc Conversion Kit Slotted Engine Cowling CLoc Conversion Kit Phillips Nose Panel CLoc Conversion Kit Slotted Nose Panel CLoc Conversion Kit Phillips Engine Cowling CLoc Slotted Engine Cowling CLoc Phillips Nose Panel Southco Slotted Nose Panel CLoc Conversion Kit Slotted Nose Panel CLoc Conversion Kit Phillips Engine Firewall CLoc Slotted Engine Firewall CLoc Phillips Engine Cowling CLoc Slotted Engine Cowling CLoc Phillips Turtleback CLoc Slotted Turtleback CLoc Phillips Engine Cowlings CLoc Slotted Engine Cowlings CLoc Phillips Turtleback CLoc Slotted Turtleback CLoc Phillips Engine Cowlings CLoc Slotted Engine Cowlings CLoc Phillips Turtleback CLoc Slotted Turtleback CLoc Phillips Engine Cowlings CLoc Slotted Engine Cowlings CLoc Phillips Engine Cowling CLoc Slotted Engine Cowling CLoc Phillips Engine Cowlings Avionics Panel CLoc Slotted Engine Cowlings Avionics Panel CLoc Phillips Engine Cowlings Avionics Panel CLoc Slotted Engine Cowlings Avionics Panel CLoc Phillips

Some Part#s Special Order Only Refer to www.skybolt.com for current revision

Skybolt Cowling Replacement Kits - Conversion Kits - Options - Trim Kits - Fuel Tank Kits

Rev 15 8-22-2016 I:/Pricelist/KIT INDEX.xls

CESSNA

Serial#

Fastener

Cowling Kit

C120/140 C150

All 17001-64532

Screws

None None

C150G-M 67-77 A150 K-M Aerobat (and Commuter) 70-77

64533-79406

Southco

C152 Early 78 A152 Early 78 C152 Late 78-85 A152 Late 78-86 C170 C172-172G 56-66

79406-81195 F152-01429-01528 Camloc 40S5 0735-0779 81196-86035 F152-01529 On Camloc 40S5 0780-1049 All 28000-54892 Screws

None None

C172H-P 67-81

54893-75034 Standard Cowl - All Southco

C172-C1 C172-C1P

C172P,Q 82-83 C172P,Q 84-86 C172P 86-On HawkXP,XPII 77-81 Cutlass RG 80-85 C172R C172S 1996-On C175 58-62

C172-C2 C172-C2P 76080-76516 27S3/40S5 C172-C3 C172-C3P 76517 On 40S5 C172-C4 C172-C4P R172-2000-3454 Southco/40S5 C172-C5 Southco-firewall,4002 nose/center split C172-C5P All 40S5 C172-C6 C172-C6P 80001 On Lord/40S5 C172-C8P

55001-57119

Screws

C177, A, B & RG 71-81

All

Southco

C177-C1 C177-C1P

C180-180C 53-60 C180 61-62 C180 63-72 C185 61-72

30000-50911

Screws

None

50912-51183

40S5

C180-C1 C180-C1P

51184-52284 0001-02090

40S5

C180 73-78 C185 73-78 C180 79-81 C185 79-85

52285-53000 02091-03683 53001-53203 03684-On

40S5

Original

75035-76079, 75869-76079

Southco

Kit Description

TR/DL Net/20

TR/DL

Net/20

Trim Kit

Fuel Tank Kit (1 Tank)

Net/20

SK25S4S Phillips

$331.45

C-120/140 C-150/152

$44.60 $47.00

None C150-FT1 C150-FTLR

$63.38 $75.78

40S5S Phillips with Doublers 10 ea SK2003-14 Mounts

$537.83 $775.25 $193.00

SK25S4S Phillips

$446.63

C-170 C-172/172RG

$51.69 $47.00

None C172-FT1

$93.25

SK203C172P4 C100-EAD3 C100-EAD4 SK2003-14-11 SK203C172PQ4 SK2003-14-11 SK203C172PQ4 SK2003-24-11 None

40S5S Phillips Conversion Kit Eng Access Door (Original) Eng Access Door (CLoc Conv) 11 ea SK2003-14 Mounts 40S5S Phillips 11 ea SK2003-14 Mounts 40S5S Phillips 11 ea SK2003-24 Mounts

$736.97 $16.98 $29.24 $212.30 $846.35 $212.30 $846.35 $232.10

SK203C172PXP4 SK2003-14-13 None

40S5S Phillips 13 ea SK2003-14 Mounts

$771.87 $388.70

SK2003-42-11

11 ea SK2003-42 Mounts

$328.90

C175C2800P

SK25S4S Phillips

$472.31

C-172/172RG

$47.00

C172-FT1

$93.25

SK203C177P4 SK2002-14-14

40S5S Phillips 14ea SK2003-14 Mounts

$790.00 $270.20

C-177/177RG

$94.00

None

C180C2800P

SK25S4S Phillips

$472.31

C-180/185

$59.00

C180-FT1

$44.40

C100-EAD5 C100-EAD4 C100-AF1 C100-EPD1S C100-EPD1P

Eng Access Door (Original) Eng Access Door (CLoc Conv) No STC Air Filter Fastener Kit External Pwr Door (Slotted) External Pwr Door (Phillips)

$17.32 $29.24 $11.92 $5.40 $6.28

C-180/185

$59.00

C180-FT1

$44.40

C-180/185

$59.00

C180-FT2

$53.28

C-180/185

$59.00

C180-FT2

$53.28

C-180/185

$59.00

C180-FT2 or FT3

$58.25

Options

Kit Description

TR/DR

None C150C2800P

C150-C1 C150-C1P

Slotted Southco Phillips Southco

$58.92 $71.36

SK203C150P4 SK3203C150P4D SK2003-14-10

C152-C1 C152-C1P C152-C2 C152-C2P

Collared Slotted Phillips Collared Slotted Phillips

$206.26 $206.65 $273.43 $265.28

None

Southco/40S5

$116.49 $130.34

Slotted Southco/4002 Phillips Southco/40S5 Slotted 2700/4002 Phillips 27S3/40S5 Collared Slotted Phillips Collared Slotted Phillips Collared Slotted Phillips Phillips

$162.65 $178.49 $214.48 $203.23 $208.22 $206.05 $277.17 $285.19 $268.15 $264.93 $274.60

Tr/DL

None None C172C2800P

Slotted Southco Phillips Southco

Net/10

8001 On

40S5

C180-C2 C180-C2P

Collared Slotted Phillips

Collared Slotted Phillips

Collared Slotted Phillips

$89.39 $102.75

$220.05 $217.90

$206.72 $204.34

Verify Fastener On Aircraft

Skybolt Copyright 2017

1

Rev 15 8-22-2016

CESSNA (Continued)

Original

C182, A-C 53-60 C182D 61

Serial# 33000-53007 53008-53598

Fastener Screws 40S5

C182E-M 62-69

53599-60055

40S5

C182N-P 70-72

60056-61425

40S5

C182P-Q 73-78

61426-66590

27S3/40S5

C182, Q, R 79-86

66591-On

27S3/40S5

T182,R,TR,RG 78-86

All

40S5

C182S 97-00 C182T 01-On

40S5

182T 01-On T182T 01-On C188 Agwagon 66-83

80004-80944 Non-Turbo 8001 On Non-Turbo 80945 On Turbo 8001 On Turbo All

C205 63-64 C206 64 U,TU206 65-84 P,TP206 65-70 U206,TU 85-86

0001-0577 0001-0275 0276-06846 091-0647 06847 On

40S5

C206, T206 97-On C207,T207 69-84

08000-On All

C208 85-On C210, A 60-61 C210 B thru F 62-66

All 57001-57840 57841-58818

C210 G thru J 67-69 C210 K thru N 70-81 T210 F 66

58819-59199 59200-64535 No Air Cond 0001-0197

T210 G thru J 67-69 T210 K thru L 70-73 C210 L-N 74-84 C210,T210 N 74-84 P210 N 78-83 T210R(Turbo) 85-86 P210R 85-86 C210R 85-86 (Non Turbo)

0198-0454 59200-60089 No Air Cond 60090-64897 With Air Cond 60090-64897 0001-00834 64898-65009 0835-0874 64898-65009 N0 Turbo

C303 T303 Crusader 82-84

00001-00315

C310 54-57

35000-35546

C310 B,C,D 58-60

40S5 40S5

Cowling Kit

Kit Description

TR/DL Net/20

None

C182-C1 C182-C1P

Collared Slotted Phillips

$203.01 $200.42

C182-C2 C182-C2P C182-C3 C182-C3P C182-C4 C182-C4P

Collared Slotted Phillips Collared Slotted Phillips Collared Slotted Phillips

$193.26 $190.74 $208.62 $206.10 $152.70 $147.23

C182-C5 C182-C5P C182-C6 C182-C6P C182-C7 C182-C7P C188-C1 C188-C1P

Collared Slotted Phillips Collared Slotted Phillips Collared Slotted Phillips Collared Slotted Phillips

$281.11 $278.52 $368.39 $363.56 $365.03 $360.27 $378.78 $368.21

C205-C1 C205-C1P

Collared Slotted Phillips

$207.95 $212.47

Collared Slotted Phillips Collared Slotted Collared Slotted Phillips Phillips Collared Slotted Phillips

$239.27 $237.63 $295.16 $278.58 $277.08 $364.34 $279.00 $277.08

C182C2800P C100-AF1 C100-EPD1S C100-EPD1P C100-EPD1S C100-EPD1P C100-EPD1S C100-EPD1P SK203C182P4 C100-EPD1S C100-EPD1P SK2003-24-14 C100-EPD1S C100-EPD1P SK2003-42-14

SK25S4S Phillips Air Filter Fastener Kit External Pwr Door - Slotted External Pwr Door - Phillips External Pwr Door - Slotted External Pwr Door - Phillips External Pwr Door - Slotted External Pwr Door - Phillips 40S5S Phillips External Pwr Door - Slotted External Pwr Door - Phillips 14ea SK2003-24 Mounts External Pwr Door - Slotted External Pwr Door - Phillips 14ea SK2003-42 Mounts

Net/20 $472.31 $11.92 $5.40 $6.28 $5.40 $6.28 $5.40 $6.28 $696.61 $5.40 $6.28 $295.40 $5.40 $6.28 $418.60

C100-EPD1S C100-EPD1P C188-RSP1 C200-2800 C200-28S3

External Pwr Door - Slotted External Pwr Door - Phillips Fuselage ZLoc Belly Panel (CLoc converted-Slotted) Belly Panel (CLoc converted-Phillips)

$5.40 $6.28 $72.90 $328.98 $319.27

C200-2800 C200-28S3 None C200-2800 C200-28S3 None None

Belly Panel (CLoc converted-Slotted) Belly Panel (CLoc converted-Phillips)

$328.98 $319.27

Belly Panel (CLoc converted-Slotted) Belly Panel (CLoc converted-Phillips)

$328.98 $319.27

TR/DR

Trim Kit

TR/DL

C-182/182RG C-182/182RG

Net/10 $57.00 $57.00

C-182/182RG

Fuel Tank Kit (1 Tank)

Tr/DL

C182-FT1 C182-FT1

Net/20 $44.40 $44.40

$57.00

C182-FT2 C182-FT2LR

$17.52 $35.04

C-182/182RG

$57.00

C-182/182RG

$57.00

C182-FT2 C182-FT2LR C182-FT3

$17.52 $35.04 $47.40

C-182/182RG

$57.00

None

C-182/182RG

$57.00

None

C-Agwagon

$81.93

None

C-206/207

$72.15

C206-FT1 C206-FT1LR

$17.52 $35.04

C-208 C-210

$220.80 $94.00

C-210 C-210 C-210

$94.00 $94.00 $94.00

C-210 C-210 C-210

$94.00 $94.00 $94.00

None C210-FT1 C210-FT2 C210-FT2LR C210-FT3 C210-FT4 C210-FT2 C210-FT2LR C210-FT3 C210-FT4 C210-FT4

$32.40 $17.52 $35.04 $12.48 $29.10 $17.52 $35.04 $12.48 $29.10 $29.10

Note: 1985 SN06847 Up Listed Below 40S5

40S5

C206-C1 C206-C1P C206-C2P C207-C1 C207-C1P C208C1P C210-C1 C210-C1P Note: Mid Year Change

Note: SN Sequence Change C210-C2 Collared Slotted C210-C2P Phillips

$258.92 $255.82

C210-C3 C210-C3P C210-C4 C210-C4P C303-C1 C303-C1P C310-C1 C310-C1P

Collared Slotted Phillips Collared Slotted Phillips Collared Slotted Phillips Collared Slotted Phillips

$287.75 $284.99 $239.27 $237.63 $532.30 $526.14 $190.43 $188.75

35655-39299

C310-C2 C310-C2P

Collared Slotted Phillips

$685.60 $711.52

C310 E, F thru K 61-66

F0001-K0245 Non Turbo

C310-C3 C310-C3P

Collared Slotted Phillips

$740.19 $742.10

C310 L thru N 67-68

N0001-N0198 Non Turbo

C310 P thru Q 69-74 C320A-E SkyKnight 62-68 C310P,Q,R 69-81

P0001-Q1160 Non Turbo All P0001-R2140 All Turbo

Skybolt Copyright 2017

Options

Kit Description

40S5

40S5

40S5

C310-C4 Kits now -C3 Kits C310-C5 Collared Slotted C310-C5P Phillips

$613.58 $606.58

None

None C300-BA1 C300-OAD1S C300-OAD1P C300-BA1 C300-OAD1S C300-OAD1P C300-BA3 C300-NA1S C300-NA1P C300-OAD1S C300-OAD1P

Battery Access Panel Oil Access Door - Slotted Oil Access Door - Phillips Battery Access Panel Oil Access Door - Slotted Oil Access Door - Phillips Battery Acces Panel Nose Access - Slotted K-Q Only Nose Access - Phillips K-Q Only Oil Access Door - Slotted Oil Access Door - Phillips

$97.12 $29.40 $30.92 $97.12 $29.40 $30.92 $171.04 $173.10 $171.00 $29.40 $30.92

C-310-1 (55-63)

$129.15

C310-FT1 (310 thru K)

$26.32 1 Aux/Main

C-310-2 (64-Up

$154.00

C310-FT1 (310 thru K)

$26.32 1 Aux/Main

C-310-2

$154.00

C310-FT1

C300-BA3 C300-NA1S C300-NA1P

Battery Acces Panel Nose Access - Slotted No C310R Nose Access - Phillips No C310R

$171.04 $173.10 $171.00

C-310-2

$26.32 1 Aux/Main $24.96 1 Aux/Main $53.24 1 Aux/Main $53.24 1 Aux/Main

C310-FT2 C310-FT3 $154.00

C310-FT3

2

Rev 15 8-22-2016 Original

CESSNA (Continued)

Serial#

C336 Skymaster 63-64

0001-0195 Fixed Gear

C337 Skymaster 65-80 C337P

0002-01951 0001-0356

C340,A

All

C401,402,A,B

All

C402C 79-85

Fastener

Cowling Kit

Kit Description

TR/DL Net/20

Options None

C336-C1 C336-C1P C337-C1 C337-C1P

Collared Slotted Phillips Collared Slotted Phillips

$509.06 $504.30 $696.36 $687.49

C340-C1 C340-C1P C400-C1 C400-C1P

Collared Slotted Phillips Collared Slotted Phillips

$774.24 $764.30 $751.83 $745.53

402C0001-0808

C400-C2 C400-C2P

Collared Slotted Phillips

$1,183.26 $1,171.29

C404 Titan 77-81

0001-0859

C404-C1 C404-C1P

Collared Slotted Phillips

$828.22 $817.51

For C411 - See C421 below C414, C414 II 70-77

0001-0965

C414-C1 C414-C1P

Collared Slotted Phillips

$728.35 $775.77

C414A Chancellor C414A III 78-85 C411 65-68 C421,A,B 68-75

0001-1212

C414-C2 C414-C2P C421-C1 C421-C1P

Collared Slotted Collared Slotted Phillips

$1,153.90 $1,142.84 $959.80 $949.44

C421 C Golden Eagle 76-85

0001-1807

C421-C2 C421-C2P

Collared Slotted Phillips

$959.80 $949.44

C425 Corsair/Conquest I PT6 81-86

425-0001-0236

C425-C1 C425C1P

Collared Slotted Phillips

$733.80 $725.33

C441 Conquest/II Garrett 78-86

441-0001-0362

C441-C1 C441-C1P

Collared Slotted Phillips

$937.14 $925.94

Skybolt Copyright 2017

0002-0300 0001-0970

Kit Description

TR/DR Net/20

Trim Kit

TR/DL Net/10

Fuel Tank Kit

Net/20

C-336/337

$172.47

C337-FT1

$49.37

C-335/340

$160.00

C340-FT1

C-401/402

$215.00

C400-FT1

$47.84 1 Aux/Main $73.12 1 Aux/Main

C-401/402

$215.00

C402C-FT1

C-401/402

$0.00

None

Tr/DL

C300-NA2 C300-NA3S C300-NA3P C300-NA4S C300-NA4P C400-NF1 C400-BA1S C400-BA1P C400-NP1S C400-NP1P C400-NP2S C400-NP2P C400-NP3S C400-NP3P C400-NF1 C400-BA1S C400-BA1P C400-NP4S C400-NP4P C400-NP5S C400-NP5P C400-BA2S C400-BA2P C400-CP1S C400-CP1P C400-NP4S C400-NP4P C400-NP5S C400-NP5P

Avionics Panel Avionics Panel - Slotted Avionics Panel - Phillips Nose Access Panel - Slotted Nose Access Panel - Phillips Nacelle Panels and Fairing Battery Acces Panel - Slotted Battery Acces Panel - Phillips Nose Panel - Slotted 402A0001-0046 Nose Panel - Phillips 402A0001-0046 Nose Panel - Slotted 402A0047-On Nose Panel - Phillips 402A0047-On Nose Panel - Slotted 402B Nose Panel - Phillips 402B Nacelle Panels and Fairing Battery Acces Panel - Slotted Battery Acces Panel - Phillips Nose Panel w Avionics Door - Slotted Nose Panel w Avionics Door - Phillips Nose Panel No Avionics Door - Slotted Nose Panel No Avionics Door - Phillips Inverter/Battery Panel - Slotted Inverter/Battery Panel - Phillips Bottom Cowling Panels - Slotted Bottom Cowling Panels - Phillips Nose Panel w Avionics Door - Slotted Nose Panel w Avionics Door - Phillips Nose Panel No Avionics Door - Slotted Nose Panel No Avionics Door - Phillips

$35.76 $146.56 $135.04 $130.88 $119.36 $134.44 $58.80 $53.74 $159.60 $145.92 $162.00 $147.72 $159.60 $145.92 $134.44 $58.80 $53.74 $126.00 $115.20 $169.66 $154.66 $101.97 $93.21 $138.48 $136.80 $126.00 $115.20 $169.66 $154.66

C400-NF1 C400-BA1S C400-BA1P C400-CP2S C400-CP2P C400-NP6S C400-NP6P C400-NP7S C400-NP7P

Nacelle Panels and Fairing Battery Acces Panel - Slotted Battery Acces Panel - Phillips Bottom Cowling Panels - Slotted Bottom Cowling Panels - Phillips Nose Panel w Avionics Door - Slotted Nose Panel w Avionics Door - Phillips Nose Panel No Avionics Door - Slotted Nose Panel No Avionics Door - Phillips

$134.44 $58.80 $53.74 $117.60 $107.52 $123.97 $116.55 $159.80 $146.07

C-411/414

$138.65

C414-FT1

$57.76 1 Aux/Main

C-411/414

$138.65

C414-FT2

$68.90 1 Aux/Main

(C414 and C414A both use same Options listed above) C400-RAD1S Radome - Slotted C400-RAD1P Radome - Phillips C400-BA2S Battery Acces Panel - Slotted C400-BA2P Battery Acces Panel - Phillips C400-NP8S Nose Panel No Avionics Door - Slotted C400-NP8P Nose Panel No Avionics Door - Phillips C400-OD1S Oil Drain Door - Slotted C400-OD1P Oil Drain Door - Phillips C400-BA2S Inverter/Battery Panel - Slotted C400-BA2P Inverter/Battery Panel - Phillips C400-NP6S Nose Panel w Avionics Door - Slotted C400-NP6P Nose Panel w Avionics Door - Phillips C400-NP7S Nose Panel No Avionics Door - Slotted C400-NP7P Nose Panel No Avionics Door - Phillips C400-NP6S Nose Panel w Avionics Door - Slotted C400-NP6P Nose Panel w Avionics Door - Phillips C400-NP7S Nose Panel No Avionics Door - Slotted C400-NP7P Nose Panel No Avionics Door - Phillips C400-NP6S Nose Panel w Avionics Door - Slotted C400-NP6P Nose Panel w Avionics Door - Phillips C400-NP7S Nose Panel No Avionics Door - Slotted C400-NP7P Nose Panel No Avionics Door - Phillips

$57.70 $57.00 $101.97 $93.21 $230.60 $210.21 $16.80 $15.36 $101.97 $93.21 $123.97 $116.55 $159.80 $146.07 $123.97 $116.55 $159.80 $146.07 $123.97 $116.55 $159.80 $146.07

C-411/414 C-421

$138.65 $160.50

C411-FT1 C400-FT1

$44.32 $73.12

C-421

$160.50

C400-FT1

$73.12 1 Aux/Main

$53.60 1 Aux/Main

3

Rev 15 8-22-2016 Original

CESSNA (Continued)

Serial#

CIT I,II Citation 72-94

All

CIT III Citation 83-91

Fastener

C500-C1 C500-C1P C500-C2 C500-C2P

0002-0206 Original

BEECHCRAFT

Serial#

Fastener

Musketeer23 63-66

M1-900

MS27039

Musketeer23A,B 66-69 M901-1284 40S5 Musketeer24 66-69 MA1-363 Sport150 66-69 MB1-480 Musketeer23C 70-On M1285-1361 40S5 Musketeer24 70 MA364-On Sport150 70-78 MB481-905 Sundowner 180 72-83 M1362-2392 Sierra 200 70-83 MC2-795 Debonair 33,A 60-61 CD1-CD350 Bonanza 35-N35 47-61 D1-D6567 (Models M-N Change from #2 Airloc to #5 Airloc on or about SN6567…..Check)

* *

Debonair 33 A-C 61-67 CD351-CD1234 Debonair C33A,E33A 66-69 CE1-CE289 Designated Bonanza 68 E33, SN CD1119 68 E33A, SN CE180 Bonanza N-V35A 61-69 D6568-D9068 Bonanza F33,G33 70-73 CD1235-CD1304 Bonanza F33A,F33C 70-Mid 73 CE290-CE436 (No 418), CJ26-39 Bonanza F33A,F33C Mid 73-94 CE418, CE436-On, CJ40-On Bonanza 36, A36 68-73 E1-E424 Bonanza V35B 70-82 D9069-10403 Bonanza A36 73-87 E425 On

Cowling Kit

Cowling Kit

Kit Description

TR/DL Net/20

Options

Collared Slotted

$697.88

None

Phillips

$689.20

Collared Slotted

$190.34

Phillips

$187.68

Kit Description MS27039C

TR/DL Net/20

Net/20

Conversion Kit

Kit Description

Trim Kit

TR/DL Net/10

Fuel Tank Kit

Net/20

BE-Musketeer

$56.00

None

None

BE-Musketeer

$56.00

None

BM-C2 BM-C2P

Collared Slotted Phillips

$139.31 $137.63

None

BE-Musketeer (Sundowner)

$56.00

None

B35UC530 B35LC2090

AJ5 Dzus-Upper #2 Airloc - Gills Includes Grommets

$49.28 $71.00

BE-Bonanza

$57.00

None

B35UC530 B35LC5080

AJ5 Dzus-Upper #5 Airloc - Gills Includes Grommets

$49.28 $71.00

BE-Bonanza

$57.00

None

Latch Upper

BE-Bonanza

$57.00

None

BE-Bonanza

$57.00

None

BE-Bonanza

$57.00

$197.00 $312.07 $308.71

B35UC40S B35UC40P B35LC27S B35LC28P B35UC40S B35UC40P B35LC40S B35LC40P No Kit for Upper B35LC40S B35LC40S B35LC40P No Kit for Upper B35LC40S B35LC40P No Kit for Upper B35LC40S B35LC40P None B55-NC B55-EP B55-NP1 B55-EPD B55-RAD B55-BD B55-FG B55-AFP B55-AS1 B55-AS2 B55-NP1 B55-EPD B55-RAD B58P-AS1 B55-NC B55-NP2 B55-EPD B55-RAD B55-AS3 B60-LP1S B60-LP1P B60-LP2S B60-LP2P None

None BE-Baron55

$134.43

None

BE-Baron58

$155.63

None

BE-Baron58

$155.63

None

BE-Baron58

$155.63

None

BE-Kingair Steel Only AN509 BE-Travelair

$138.18

None

$102.57

None

B50-C1 B55-C1 B55-C1P

Baron 58P 76-86 Baron 58TC

TJ3 On TK1 On

B55-C2 B55-C2P

Collared Slotted Phillips

$300.53 $297.31

Baron 56 67-71

TG1-TG94

B56-C1 B56-C1P

Collared Slotted Phillips

$262.99 $267.61

Duke 60,A60 68-73 Duke B60 74-82

P4-P246 P247-597

B60-C1 B60-C1P

Collared Slotted Phillips

$371.82 $368.39

Dutchess B76 78-82

ME1-ME437

B76-C1 B76-C1P See Cowling Ref

Collared Slotted Phillips

$324.78 $320.86

B95-C1

Airloc

Skybolt Copyright 2017

Fuel Tank Kit

Net/10

B35LC5080 B35LC5100 Latch Upper

B35LC5100 Latch Upper

$71.00 $71.00

$71.00

$71.00

None $410.00

Tr/DL

None

$148.62

H1-DH347 TC1 On TE1 On TH1 On

TD2-TD722

TR/DL

$89.40 $88.14

B35LC5100

King Air Many Variations Travelair 95 58-68

Net/20

Trim Kit

Collared Slotted Phillips

Twin Bonanza B50 52-62 Baron 55,A55,B55,B55A 61-82 Baron C55, D55, E55 Baron 58

EA1-On

TR/DR

BM-C1S BM-C1 BM-C1P

No Kit for Upper #5 Airloc - Gills Only #5 Airloc - Gills Only Includes Grommets No Kit for Upper #5 Airloc - Gills Only Includes Grommets No Kit for Upper #5 Airloc - Gills Only Includes Grommets Airloc Collared Slotted Phillips

A36TC,B36TC 79-87

Kit Description

None

SK4002S Upper Conversion Kit SK40S5S Upper Conversion Kit SK2700S Lower Gill Conversion Kit SK28S3S Lower Gill Conversion Kit SK4002S Upper Conversion Kit SK40S5S Upper Conversion Kit SK4002S Lower Gill Conversion Kit SK40S5S Lower Gill Conversion Kit

$154.13 $153.57 $208.65 $200.45 $154.13 $153.57 $264.00 $262.60

SK4002S Lower Gill Conversion Kit SK4002S Lower Gill Conversion Kit SK40S5S Lower Gill Conversion Kit

$264.00 $264.00 $262.60

SK4002S Lower Gill Conversion Kit SK40S5S Lower Gill Conversion Kit

$264.00 $262.60

SK4002S Lower Gill Conversion Kit SK40S5S Lower Gill Conversion Kit

$264.00 $262.60

Lower Nose Cowling #5 ZLoc (No later B58) Filter Access Panels #4 ZLoc (B55 Only) Nacelle Panels #4 ZLoc External Pwr Door #4 ZLoc Radome #5 ALoc Bag Door #5 Aloc Wing (TE-1 thru 451) Fuel Gage Panels #5 Aloc (Not all airframes) Aft Fuselage Panel #5 Aloc (Not all airframes) Air Scoop (TE1 thru TE1078, TH1 thru TH740, No B55) Air Scoop (TE1079 Up, TH741 Up, No B55) Nacelle Panels #4 ZLoc External Pwr Door #4 ZLoc Radome #5 ALoc Air Scoops #4 ZLoc Lower Nose Cowling #5 ZLoc Nacelle Panels #2 ALoc External Pwr Door #4 ZLoc Radome #5 ALoc Air Scoops #2 and #5 ALoc Lower Panels - Slotted P4-P144 Lower Panels - Phillips P4-P144 Lower Panels - Slotted P145-P247 Lower Panel - Phillips P145-P247

$152.16 $51.84 $168.48 $6.16 $8.94 $16.98 $17.88 $11.92 $91.76 $91.76 $168.48 $6.16 $8.94 $95.36 $152.16 $286.88 $6.16 $8.94 $203.36 $42.00 $38.40 $42.00 $38.40

Tr/DL

4

Rev 15 8-22-2016 Original

PIPER PA-J3 Cub 45-47 PA-11 47-49 PA-12 Cruiser 46-47 PA-14 Cruiser 48 PA-16 Clipper 49 PA-18 Super Cub 50-83

Serial#

Fastener

Cowling Kit

Kit Description

Net/20

TR/DL Net/10

Fuel Tank Kit

PA-J3 Cub PA-Super Cub

$78.45 $84.69

None None

PA-Apache

$100.65

None

PA-Aztec

$135.15

None

PA-Aztec

$135.15

None

PA-Comanche

$59.00

None

None

PA-Pawnee PA-140-235

$215.00 $62.61

None PA28-FT1

$62.61 $62.61 $62.65 $78.80 $78.80

PA28-FT1

$89.12 1 Tank

None

PA-140-235 PA-140-235 PA-Arrow PA-Warrior PA-Warrior

PA28-FT2

PA140-235 PA-Warrior PA-Arrow PA-Arrow

$62.61 $78.80 $62.65 $62.65

PA28-FT1 PA28-FT2 PA28-FT1 PA28-FT1

$115.71 1 Tank $89.12 $115.71 $89.12 $89.12

PA-T Comanche

$108.96

None

Options

None

None

None

None

105HP 125HP Continental

PA18-C1 PA18-C2 PA18-C3

Eng Side Panels Slotted Eng Side Panels Slotted Eng Side Panels Slotted

$234.46 $202.44 $208.65

PA-20 Pacer 50-54 PA22 TriPacer 51-63 PA23-150 Apache 54-57 PA23-160 Apache 58-62 PA23-235 Apache 62-65 PA23-250 Aztec, B 60-64

20-3 thru 1121 22-1 thru 9848 23-5 thru 1163 23-1164 thru 2040 27-505 thru 622 27-1 thru 2504

PA23-C1 PA23-C1P PA23-C2 PA23-C2P

Slotted Phillips Slotted Phillips

$330.16 $366.08 $439.06 $488.44

PA23-250 Aztec Early C 64

27-2505 thru 2736

PA23-C3

Southco Slotted

$503.80

PA23-250 Aztec C-F 64-81

27-2737 thru 8154029

PA23-C4 PA23-C4P

Collared Slotted Phillips

$448.10 $440.76

PA24-180 Comanche 58-64 PA24-250 Comanche 58-64 PA24-260 Comanche,B,C 65-68 PA24-400 Comanche 400 64-65

24-1 thru 3687 24-1 thru 3687 24-4000 thru 5028 On 26-3 thru 148

40S5

PA25 Pawnee,B,C,D 60-81 PA28-140 Cherokee 64-77 PA28-150/160 Cherokee 62-67 PA28-151 Warrior 74-77 PA28-161 Warrior 77-86 PA28-180 Cherokee 63-75 PA28R-180 Arrow 67-71 PA28-181 Archer 76-87 PA28-201T Turbo Dakota 79

25-3 thru 8156001 On 28-20001 thru 7725290 28-1 thru 4377 On 28-7415001 thru 7715314 28-7716001 thru 16099 On 28-671 thru 7505259 28R30004 thru 7135229 28-7690001 thru 8690021 28-7921002 thru 7921091

Latches Latches Latches Latches Latches Latches Latches 40S5

PA28-235 Charger,Pathf 68-77 PA28-236 Dakota 79-87 PA28R-200 Arrow 72-76 PA28R-201,T ArrowII,III 77-78 PA28RT-201,T Arrow IV 79-87 PA30 Twin Comanche 63-65

28-11040 thru 7710089 28-7911001 thru 8611004 On 28R723500 thru 7635545 28R7635001 thru 7803373 28R7918001 thru 86R8631001 On 30-1 thru 793,799-901

Latches Latches Latches

PA30 Twin Comanche 66-68 PA39 Twin Comanche CR 70-72

30-794 thru 798, 902 thru 2000 39-1 thru 152

Skybolt Copyright 2017

Trim Kit

TR/DL

None None None None None None None PA28-C1 PA28-C1P None

Collared Slotted Phillips

$241.95 $239.50

Kit Description

None

PA-NP1S PA-NP1P PA-NP2S PA-NP2P PA-NP3S PA-NP3P PA-FD1W PA-NP2S PA-NP2P PA-NP3S PA-NP3P PA-FD1W PA-NAC1S PA-NAC1P PA-NP2S PA-NP2P PA-NP3S PA-NP3P PA-FD1W None

Nose Panels Apache/Aztec No Six Place Nose Panels Apache/Aztec No Six Place Nose Panels Aztec Six Place No Ice Nose Panels Aztec Six Place No Ice Nose Panels Aztec Six Place Ice Shields Nose Panels Aztec Six Place Ice Shields Fuel Doors Winged Nose Panels Aztec Six Place No Ice Nose Panels Aztec Six Place No Ice Nose Panels Aztec Six Place Ice Shields Nose Panels Aztec Six Place Ice Shields Fuel Doors Winged Nacelle Panels 27-4426, 27-4574 On Nacelle Panels 27-4426, 27-4574 On Nose Panels Aztec Six Place No Ice Nose Panels Aztec Six Place No Ice Nose Panels Aztec Six Place Ice Shields Nose Panels Aztec Six Place Ice Shields Fuel Doors Winged

$18.90 $21.18 $81.90 $91.78 $81.90 $91.78 $26.88 $81.90 $91.78 $81.90 $91.78 $26.88 $183.20 $166.80 $81.90 $91.78 $81.90 $91.78 $26.88

None

Southco

None PA28-C1 PA28-C1P PA30-C1

Collared Slotted Phillips Southco

$241.95 $239.50 $608.10

40S5 40S5

PA30-C2 PA30-C2P

Collared Slotted Phillips

$577.00 $572.10

Tr/DL Net/20

None None PA30-NP1 PA30-2701S PA30-2701P PA30-2702S PA30-2702P PA30-NP1 PA30-2702S PA30-2702P

Nose Pane;l - Slotted Southco Engine Cowling 2700S Conv No STC Engine Cowling 27S3S Conv No STC Nose Panel 2700S Conv No STC Nose Panel 27S3S Conv No STC Nose Pane;l - Slotted Southco Nose Panel 2700S Conv No STC Nose Panel 27S3S Conv No STC

$175.20 $989.95 $950.35 $287.55 $276.75 $175.20 $287.55 $276.75

$89.12 1 Tank

5

PIPER (Continued)

Serial#

Fastener

Cowling Kit

PA31-300,310,325 Navajo 67-84 PA31-350 Chieftain 73-84 PA31P Press Navajo 70-77 PA31T Cheyenne I,II,III 78-84 PA42-720 Cheyenne III 80-87 PA32-260 Cherokee 6 65-78 PA32-300 Cherokee 6 65-78 PA32-300 Cherokee 6 79 PA32R-300, Lance 76-79 PA32R-300T Lance T Tail 78-79 PA32R-300T Turbo Lance T Tail PA32-301 Saratoga 80-87 PA32R-301T Saratoga 80-87 PA34-200 Seneca 72-74 PA34-200T Seneca II 75-78

31-2 On 31-7305001 thru 8452021 31P-3 thru 7730012 31T-7804001 On 42-7801001 On 32-1 thru 7800008 32-40000 thru 780222 32-7940001 Up 32R7680001 thru 7987126 32R-7885001 Up 32R-7887001 Up 32-8006001 On 32R8029001 On 34-7250001 thru 7450220 34-7570001-7870474

Tridair

None

PA34-200T Seneca II 79-81 PA34-220T Seneca III 81-93 PA34-220T Seneca IV 94-96 PA34-200T Seneca V 97-08

34-7970001 thu 8170085 34-8133001 thru 8633020 On 34-48038 thru 34-49000 34-49001 On

PA36 Pawnee, Brave 73-83 PA38-112 Tomahawk 78-82

36-7360001 thru 8302025 38-78A0001 thru 82A0122

PA42 Cheyenne - See PA31 PA44-180,T Seminole 79-82

44-7995001 thru 8207020

PA46 Malibu 84-On

46-8408001 On

PA60-600/601/602 Aerostar 69-83 PA60-700P Aerostar 83-84

60-0001 On

Original

Skybolt Copyright 2017

60-8423001 On

Latches

Latches 27S3 40S5

40S5

Kit Description

TR/DL Net/20

TR/DR Net/20

None

None

None

PA32-C1 PA32-C1P None PA34-C2 PA34-C2P PA34-C3 PA34-C3P

Collared Slotted Phillips

$112.04 $111.30

Slotted Phillips Collared Slotted Phillips

$437.17 $403.00 $647.12 $639.28

PA34-C4 PA34-C4P

Collared Slotted Phillips

$647.12 $639.28

PA44-C1 PA44-C1P PA46-C1 PA46-C1P PA600-C1 PA600-C1P PA700-C1 PA700-C1P

Options

Kit Description

Collared Slotted Phillips Collared Slotted Phillips Collared Slotted Phillips Collared Slotted Phillips

$340.66 $337.30 $332.09 $327.11 $957.80 $946.74 $1,010.34 $992.80

None PA34-OPTION-1S PA34-OPTION-1P PA34-OPTION-1S PA34-OPTION-1P

TR/DL Net/10

Fuel Tank Kit

PA-Navajo

$201.39

None

PA-Cheyenne

$282.33

PA-Cherokee Six

$63.93

PA-Seneca Turtleback - Slotted CLoc Turtleback - Phillips CLoc Turtleback - Slotted CLoc Turtleback - Phillips CLoc

$546.35 $549.81 $546.35 $549.81

PA34-OPTION-4S Turtleback - Slotted CLoc PA34-OPTION-4P Turtleback - Phillips CLoc None

$513.84 $507.96

Rev 15 8-22-2016

Trim Kit

$186.36

Tr/DL Net/20

PA32-FT1

$115.71

PA32-FT2 PA32-FT3 PA32-FT4

$103.30 $101.50 $209.08

PA32-FT5

$27.80

PA34-FT1 PA34-FT1

$344.60 $344.60

PA34-FT2

$213.74

PA34-FT2

$213.74

PA-Pawnee PA-Tomahawk

$215.00 $75.33

None None

None

PA-Seminole

$159.00

None

None

PA-Malibu

$99.60

None

None

PA-Aerostar

$194.70

None

6

Rev 15 8-22-2016 Original

Mitsubishi

Serial#

MU2 B thru P 67-78 MU2 Solitaire 79-85 MU2 Marquise 79-85

6 thru 459

Mooney

Serial#

Mark20A,B Super21 55-64

All

M20C,D,E,F 1965

All

Fastener

Cowling Kit MU2-C1 MU2-C1P MU2-C2 MU2-C2P

700 thru 1569 Original Fastener

M20C All M20E,F,G 66-78 All M20C Ranger, M20E Chaparral, M20F Super21/Executive, M20G Statesman M201 M20J 77-84 24-0001-1458

Cowling Kit

Kit Description Collared Slotted Phillips Collared Slotted Phillips

Kit Description

Net/20 $1,110.46 $1,020.62 $1,305.62 $1,214.42 Net/20

M20-C7 M20-C7P

Collared Slotted Phillips

$255.65 $242.52

500,520,560,720 680, 680E Round Cowl 52-60 500A,B,U,560F,680 560FP,FL,FLP Flat Cowl 60-69 685 72-74

Original Serial#

Fastener

All All 12000 thru 12066

500S 68-80

1755 thru 3327

690 72-85 695 80-85

1101 thru 11565, 15001 thru 15042 95000 thru 95084, 96000 thru 96208

OTHER AIRCRAFT Bel-Citabria Bel-Scout Bel-Viking Ercoupe G-AA1/AA1B G-Ag Cat G-Tiger Lake Amp

Skybolt Copyright 2017

Original Serial#

Fastener

Cowling Kit AC500-C1 AC500-C1P AC500-C2 AC500-C2P AC500-C2A AC500-C2AP AC500-C3 AC500-C3P AC500-C4 AC500-C4P

Cowling Kit

Kit Description Collared Slotted Phillips Collared Slotted Phillips Collared Slotted Phillips Collared Slotted Phillips Collared Slotted Phillips

Kit Description

$1,648.84 $1,608.46 $513.24 $507.85 $737.43 $729.31 $519.96 $513.94 $833.94 $824.14

Net/20

Net/20

M-201/231

$125.00

None

M-252

$97.00

None

Trim Kit

TR/DL Net/10

Fuel Tank Kit

R-Commander 500

$324.54

None

Trim Kit

Net/10

Fuel Tank Kit

Bel-Citabria Bel-Scout Bel-Viking Ercoupe G-AA1/AA1B G-Ag Cat G-Tiger Lake Amp

$28.45 $51.60 $17.13 $90.72 $63.00 $89.00 $96.00 $32.07

None None None None None None None None

TR/DL Net/20

Fuel Tank Kit None None None None

Kit Description

25-1000 On

Net/10 $124.00 $129.00 $124.00 $129.00

Options

M252 TSE M20K 85 On

Trim Kit M-20C/D M-20E/G M-20C/D M-20E/G

Battery Access Panel - Slotted Southco Battery Access Panel - Phillips Southco Belly Access Panel - Slotted CLoc Belly Access Panel - Phillips CLoc Battery Access Panel - Slotted CLoc Battery Access Panel - Phillips CLoc Belly Access Panel - Slotted CLoc Belly Access Panel - Phillips CLoc Battery Access Panel - Slotted Southco Battery Access Panel - Phillips Southco Belly Access Panel - Slotted CLoc Belly Access Panel - Phillips CLoc Battery Access Panel - Slotted CLoc Battery Access Panel - Phillips CLoc

$323.19 $307.23

$62.64

$62.83 $72.95

M20-BAT1S M20-BAT1P M20-BP1S M20-BP1P M20-BAT2S M20-BAT2P M20-BP1S M20-BP1P M20-BAT1S M20-BAT1P M20-BP1S M20-BP1P M20-BAT2S M20-BAT2P

Collared Slotted Phillips

MU2-FT1

None

$262.00 $248.46

M20-C6A M20-C6AP

$211.59

$100.50

Collared Slotted Phillips

25-0001 On

Net/20

MU2

M-20B

M20-C5 M20-C5P

M231 M20K-L/M 79-85

Fuel Tank Kit

$72.95

Battery Access Panel - Slotted Southco Battery Access Panel - Phillips Southco

$323.19 $307.23

Net/10

Battery Access Panel - Phillips Southco

M20-BAT1S M20-BAT1P

Collared Slotted Phillips

Trim Kit

M20-BAT1P $293.54 $290.46 $305.30 $302.24

M20-C6 M20-C6P

Net/20

Battery Access Kit Net/Net

Collared Slotted Phillips Collared Slotted Phillips

24-1459 On

TR/DR

None

M20-C2 M20-C2P M20-C3 M20-C3P

M201 M20J-L/M 77-87

AERO COMMANDER

Options

Kit Description

$62.83 $72.95 $169.46 $154.51 $106.09 $97.41 $169.46 $154.51 $62.83 $72.95 $169.46 $154.51 $106.09 $97.41 TR/DR Net/20

None

AC690-NA1S AC690-NA1P

Nose Access Panel - Slotted Nose Access Panel - Phillips

Conversion Kit

Kit Description

None

Tr/DL Net/20

$172.10 $171.00

Net/20

7

Cessna Cowling Fastener Conversion Kits Stainless SK203 Kit List

9000 Airport Blvd Leesburg, Florida 34788 (352) 326-0001 352-326-0015 (Fax)

Screw Kits - SK25S4S Series

STCd FAA-PMA Approved

SK203 Kits - Gen IV Platemounts - DiamondHead® Studs May 8, 2015

Conversion Kit Pricing Internal.xls

Model

Year

Serial Number

Kit Part Number

Description

C150

59-66

17001-64532

C150C2800P

Screw Cowling - to SK25S4S Phillips

C150G-M

67-On

64533-79405

SK203C150P-SD2

SK28S3 Phillips - Side Kit

A150K-M

70-77

A150001-A150685

SK203C150P4

SK40S5S Phillips - Complete Kit

SK-C150DL SK-C150DR

$69.65 $69.65

SK203C150P4D

SK40S5S Phillips - Complete Kit/Doubler

SK203C150P-FW4

SK40S5S Phillips - Firewall Kit

SK203C150P-RET

SK40S5S Phillips - Retro Kit

C172

56-66

28000-54892

C172C2800P

Screw Cowling - to SK25S4S Phillips

C172H-P

67-81

54893-75034

SK203C172P4

SK40S5S Phillips - Complete Kit

SK203C172P-FW4

SK40S5S Phillips - Firewall Kit

Standard Cowl - All Southco

SK203C172P-SD4

SK40S5S Phillips - Side Kit

SK203C172P-RET

SK40S5S Phillips - Retro Kit

C172P

80-83

75035-76079

SK203C172PQ4

SK40S5S Phillips - Complete Kit

C172Q

83

75869-76079

SK203C172P-FW4

SK40S5S Phillips - Firewall Kit

C172P-Q 84-85 76080-76516 83-83 Southco FW, Camloc 40S5 across nose 84-85 Camloc 27S3 FW, 40S5 across nose

SK203C172PQSD4 SK203C172P-RET

SK40S5S Phillips - Side Kit SK40S5S Phillips - Retro Kit

C172XP-XPII

SK203C172P-XP4

SK40S5S Phillips - Complete Kit

77-81

R1722000-3454

Southco - Firewall Camloc 40S5 sides, nose, and center split . Will not fit T41

FR17200226-00675* *FR17200001-00440 only 11 mounts

SK203C172P-FR4

SK40S5S Firewall Conv - SK27S3S Side/Nose/Ctr

SK203C172PXPFW4

SK40S5S Phillips - Firewall Kit

SK203C172PXPSD4

SK40S5S Phillips - Side Kit

SK203C172PXP-RET SK40S5S Phillips - Retro Kit C172R & S

97-On

80001-On

SK203C172P-RS4

8001-On

Note: Kit replaces J7444 mounts, all CLoc studs/grommets on firewall, sides, nose, service door, filter

SK40S5S Phillips - Complete Kit

Camloc 4002 - firewall/sides

SK203C172P-RS4FW SK40S5S Phillips - Firewall Kit

C175

58-62

55001-57119

C175C2800P

C177A-B

68-78

00001-02752

SK203C177P4

SK40S5S Phillips - Complete Kit

C177RG

71-78

00001-1366

SK203C177P-FW4

SK40S5S Phillips - Firewall Kit

Screw Cowling - to SK25S4S Phillips

SK203C177P-SD4

SK40S5S Phillips - Side Kit

SK203C177P-RET

SK40S5S Phillips - Retro Kit

C180

53-60

30000-50911

C180C2800P

Screw Cowling - to SK25S4S Phillips

C182

56-60

33000-53007

C182C2800P

Screw Cowling - to SK25S4S Phillips

C182P-RB

73-86

61426-68542

SK203C182P2

SK28S3/40S5S Phillips - Complete Kit

SK203C182P4

SK40S5S Phillips - Complete Kit

SK203C182P-FW4

SK40S5S Phillips - Firewall Kit

SK203C182P-RET

SK40S5S Phillips - Retro Kit

Note: RET Kits are for customers who have previously installed SK245 Kits and want to convert back to the SK2003 rubber mounts.

RET Kits include new SK2003 Mounts, SK2001AW Alignment Washers and all Hardware (No Studs or Grommets) Cessna Firewall Bracket Part#s Upper 0453003-3

Skybolt Aeromotive Corp

Lower 0453003-2

Copyright 2017 Page 71

March 10, 2017 Refer to www.skybolt.com for current revision

Beech Bonanza 33, 35, 36 and Debonair 33 Cowling Replacement and Conversion Kits STC'd

FAA-PMA Approved for TC A777 and 3A15

April 17, 2015 Rev 2

2015 Kits include fasteners designed specifically for the Bonanza, easier installation - less labor hours

Upper Cowl Latch Config (Later Models)

Upper Cowl Dzus Config (Early Models)

Lower (Gill) Cowl - Airloc (All Models)

Upper Cowl Model

Dzus AJ5 Configuration Year

Serial Numbers

Debonair (33)

60-67

C33A,E33A

66-69

Bonanza (35)

47-69

Upper Cowl

B35UC530

Stainless ZLoc

Replacement

1

CE1-CE289

B35UC40P

Stainles SK40S5S Phillips CLoc

Conversion

2,6

D1 - D9068

B35UC40S

Stainless SK4002S Collared Slot CLoc

Conversion

2,6

Model

Year

Serial Numbers

Debonair (33)

60-61

Bonanza (35)

47-61

Kit

Req

Type

Tool#

Stainless #2 ALoc

Replacement

3

Stainless SK28S3S Phillips CLoc

Conversion

4

Stainless SK2700S Collared Slot CLoc

Conversion

4

Kit

Fastener

CD1-CD350

B35LC2090

D1 - D6567

B35LC28P B35LC27S

Airloc #5-080 Configuration Year

Serial Numbers

Kit

Fastener

Kit

Req

Type

Tool#

Bonanza N35-V35A

61-69

D6568-D9068

B35LC5080

Stainless #5 ALoc

Replacement

5

33

61-67

CD351-CD1234

B35LC40P

Stainless SK40S5S Phillips CLoc

Conversion

2,6

F33

70

CD1235-CD1254

B35LC40S

Stainless SK4002S Collared Slot CLoc

Conversion

2,6

G33

72-73

CD1255-CD1304

66-Mid 73

CE1-CE435

70

CJ26-CJ39

-080

.267

B35LC5080

68-73

E1-E424

-100

.287

B35LC5100

C33A,E33A,F33A Early F33C 36

Lower Cowl Model

* *

CD1-CD1234

Airloc #2 Configuration

Lower Cowl

* *

Req Tool#

Fastener

Latch Configuration All serial numbers not listed above (No Fasteners/No Kit)

Lower Cowl

Model

Kit Type

Kit

Airloc #5-100 Configuration Year

Serial Numbers

Later F33A

Mid 73-94

Later F33C

70

V35B 36TC

73-On

E425-On

36 Installation Tool#

33 and F33 Note: Check for proper stud length.

A Dimension

A Kit

Req

Type

Tool#

Kit

Fastener

CE418,CE436-On

B35LC5100

Stainless #5 ALoc

Replacement

5

CJ40-On

B35LC40P

Stainless SK40S5S Phillips CLoc

Conversion

2,6

70-82

D9069-On

B35LC40S

Stainless SK4002S Collared Slot CLoc

Conversion

2,6

79-87

EA1-On

Tool Part#

Description

1

SK-A5C and SK-41405-3

#5 ZLoc Grommet Tool Including Clamp

2

4P3-T26

Installation Pliers and Grommet retainer tool

3

29693/29695

#2 ALoc Grommet Tool - Required only if grommets need replacement

4

SK-T26

To install SK2600-LWS Retainers

5

9529/29667

#5 ALoc Grommet Tool - Required only if grommets need replacement

9000 Airport Blvd Leesburg, FL 34788 1-800-223-1963 352-326-0012 (Fax) www.skybolt.com

Skybolt Aeromotive Corp

Copyright 2017 Page 72

March 10, 2017 Refer to www.skybolt.com for current revision

041017

Beech Bonanza Cowling Fastener Configuration Type Certificate A-777 Model Years SN

Upper Cowl

Lower Cowl

Type Certificate 3A15 Model Years

April 17, 2015 Rev 2 Upper Lower SN Cowl Cowl

35

47-48

D1-D1210

Dzus

#2-90

H35

57

D4866-D5330

Dzus

#2-90

A35

49

D1501-D2200

Dzus

#2-90

J35

58

D5331-D5725

Dzus

#2-90

B35

50

D2201-D2680

Dzus

#2-90

K35

59

D5726-D6161

Dzus

#2-90

C35

51-52

D2681-D3400

Dzus

#2-90

M35

60

D6162-D6567

Dzus

#2-90

D35

53

D3401-D3698

Dzus

#2-90

N35

61

D6568-D6841

Dzus

#5-80

E35

54

D3699-D3998

Dzus

#2-90

P35

62

D6842-D7066

Dzus

#5-80

F35

55

D3999-D4391

Dzus

#2-90

S35

63-65

D7067-D7976

Dzus

#5-80

G35

56

D4392-D4865

Dzus

#2-90

V35

66-67

D7977-D8598

Dzus

#5-80

35R

All

All

Dzus

#2-90

V35A

68-69

D8599-D9068

Dzus

#5-80

V35B

70-82

D9069-On

Latch

#5-100

35-33

60

CD2-250

Dzus

#2-90

35-A33

61

CD251-350

Dzus

#2-90

35-A33

61

CD351-CD387

Dzus

#5-80

35-B33

62-64

CD388-CD813

Dzus

#5-80

35-C33

65-67

CD814-CD1118

Dzus

#5-80

35-C33A

66-67

CE1-CECE179

Dzus

#5-80

E33

68-69

CD1119-CD1234

Dzus

#5-80

E33A

68-69

CE180-CE289

Dzus

#5-80

E33C

68-69

CJ1-CJ25

Latch

#5-80

F33

70

CD1235-CD1254

Latch

#5-80

F33A

70-Mid 73

CE290-CE435

Latch

#5-80 #5-100

F33A

Mid 73-94

CE418,436-On

Latch

F33C

70

CJ26-CJ39

Latch

#5-80

F33C

70 On

CJ40-On

Latch

#5-100

G33

72

CD1255-CD1304

Latch

#5-80

36

68-69

E1-E184

Latch

#5-80

A36

70-73

E185-E424

Latch

#5-80

A36

73-On

E425-On

Latch

#5-100

A36TC

79-81

EA1-EA272

Latch

#5-100

B36TC

82-On

EA273-On

Latch

#5-100

G36

All

All

Latch

#5-100

Skybolt Copyright 1982-2017 Page 73

Vans RV Fastener Kits 2016 Kits Include DiamondheadÂŽ Fasteners, High Shear Anti-Float Grommets, SK-RVFS1 Interlocking Flanges, SK-RVC1 Cleko Adapters, Rivet Kit.

9000 Airport Blvd Leesburg, Florida 34788 352-326-0001 352-326-0015 (Fax) RV4J-C1S RV4J-C1P RV4J-C1S-U RV4J-C1P-U RV4J-C1S-F RV4J-C1P-F RV4J-C1S-UF RV4J-C1P-UF RV4J-C1S-S RV4J-C1P-S RV4J-C1S-C RV4J-C1P-C RV8J-C1S RV8J-C1P RV8J-C1S-U RV8J-C1P-U RV8J-C1S-F RV8J-C1P-F RV8J-C1S-UF RV8J-C1P-UF RV8J-C1S-S RV8J-C1P-S RV679J-C1S RV679J-C1P RV679J-C1S-U RV679J-C1P-U RV679J-C1S-F RV679J-C1P-F RV679J-C1S-UF RV679J-C1P-UF RV679J-C1S-S RV679J-C1P-S RV1014J-C1S RV1014J-C1P RV1014J-C1S-U RV1014J-C1P-U RV1014J-C1S-F RV1014J-C1P-F RV1014J-C1S-UF RV1014J-C1P-UF RV1014J-C1S-S RV1014J-C1P-S RV-OD1 RV-OD2 SKYBEAM-40 SK-RVFS1 SK-RVCI

Skybolt Aeromotive Corp

Description Vans RV4 - Complete Kit Vans RV4 - Complete Kit Vans RV4 - Upper (FW/Side) Kit Vans RV4 - Upper (FW/Side) Kit Vans RV4 - Complete Firewall Kit Vans RV4 - Complete Firewall Kit Vans RV4 - Upper Firewall Kit Vans RV4 - Upper Firewall Kit Vans RV4 - Side Kit Vans RV4 - Side Kit Vans RV4 - Cheek Cowl Kit Vans RV4 - Cheek Cowl Kit Vans RV8 - Complete Kit Vans RV8 - Complete Kit Vans RV8 - Upper (FW/Side) Kit Vans RV8 - Upper (FW/Side) Kit Vans RV8 - Complete Firewall Kit Vans RV8 - Complete Firewall Kit Vans RV8 - Upper Firewall Kit Vans RV8 - Upper Firewall Kit Vans RV8 - Side Kit Vans RV8 - Side Kit Vans RV6,7,9 - Complete Kit Vans RV6,7,9 - Complete Kit Vans RV6,7,9 - Upper (FW/Side) Kit Vans RV6,7,9 - Upper (FW/Side) Kit Vans RV6,7,9 - Complete Firewall Kit Vans RV6,7,9 - Complete Firewall Kit Vans RV6,7,9 - Upper Firewall Kit Vans RV6,7,9 - Upper Firewall Kit Vans RV6,7,9 - Side Kit Vans RV6,7,9 - Side Kit Vans RV10,14 - Complete Kit Vans RV10,14 - Complete Kit Vans RV10,14 - Upper (FW/Side) Kit Vans RV10,14 - Upper (FW/Side) Kit Vans RV10,14 - Complete Firewall Kit Vans RV10,14 - Complete Firewall Kit Vans RV10,14 - Upper Firewall Kit Vans RV10,14 - Upper Firewall Kit Vans RV10,14 - Side Kit Vans RV10,14 - Side Kit

38 Collared Slotted Fasteners Phillips 30 Collared Slotted Fasteners Phillips 18 Collared Slotted Fasteners Phillips 10 Collared Slotted Fasteners Phillips 20 Collared Slotted Fasteners Phillips 8 Collared Slotted Fasteners Phillips 50 Collared Slotted Fasteners Phillips 34 Collared Slotted Fasteners Phillips 30 Collared Slotted Fasteners Phillips 14 Collared Slotted Fasteners Phillips 20 Collared Slotted Fasteners Phillips 52 Collared Slotted Fasteners Phillips 36 Collared Slotted Fasteners Phillips 32 Collared Slotted Fasteners Phillips 16 Collared Slotted Fasteners Phillips 20 Collared Slotted Fasteners Phillips 62 Collared Slotted Fasteners Phillips 45 Collared Slotted Fasteners Phillips 36 Collared Slotted Fasteners Phillips 19 Collared Slotted Fasteners Phillips 26 Collared Slotted Fasteners Phillips

Oil Door Winged Fasteners (Skytanium) Oil Door SK28S3 Flush Fasteners (Stainless) Composite Reinforcement Strip 3"x40" Inter-connecting Flange (Patent Pending) Cleko insert

2 ea ZG2600-1W, SK213-2, Drill Template 2 ea SK28S3-2S, SK213-2, Drill Template Per Strip 1ea Flange 1ea Insert

Copyright 2017 Page 74

Weight/Lbs 1.919 1.515 0.909 0.505 1.010 0.404 2.525 1.717 1.515 0.707 1.010 2.626 1.818 1.616 0.808 1.010 3.131 2.273 1.818 0.960 1.313

March 10, 2017