Steps of a Random Inspection of the Bobcat Hired By You

StepS of a Random InSpectIon of the BoBcat hIRed By you

A bobcat hired by you is a powerful and very sophisticated machine that needs full inspection before every engine start. This makes sure that the machine is functioning perfectly. What are the steps taken in the inspection; this is what we have discussed here in this presentation.

pRe-opeRatIon and daILy Safety checKLISt General Inspection Of Dry Hire Bobcat Brisbane:

All The Parts Should Be In Place And Properly Installed

Be Sure That All Nuts, Bolts, And Screws Are Tight

Check Hose Clamps For Tight Fit

Safety and InfoRmatIon decaLS: Check To Ensure That All Safety And Information Decals Are In Place

RoLL-oveR pRotectIve StRuctuRe (RopS): Check To Ensure The ROPS Is Not Damaged And All Hardware Is Secure

Safety BeLtS : Visually Inspect For Cuts, Fraying And Loose Parts

tyReS :

Check for Proper Tyre Pressure Visually Inspect Tyres For Wear, Damage Ensure Proper Inflation On A Daily Basis

Check Electrolyte To Ensure It Is At The Proper Level

Check Battery Posts

BatteRy : Wires Should Be Tight And Free Of Corrosion

Battery Should Be Fully Charged

engIne:

Check For Proper Engine Oil And Coolant Levels And Leaks

Check Air Filter And Replace

fueL:

Check Fuel Level

Drain Water From The Fuel Filter

Check Fuel Tank, Lines, Fuel Cap, Pump, Fuel Filters For Fuel Leakage

See Draining Water From Fuel Filter

exhauSt SyStem:

 Check For Leaks

hydRauLIc BRaKeS:

 Check Fluid Level

Seat contRoLS:

 Check To Be Sure All Seat Controls Are Operating Correctly  Be Sure Seat Locks Are Engaged

thanK you Website- https://dandmplanthire.com.au/ Address- Level 1, 55 Enterprise St, Cleveland, QLD 4163 Contact No- (07) 3286 5088Â