How Service Centers In India Clean And Degrease Engine Cylinder Liners?

Engine Cylinder Liners Services

By Jai Liners – Leading Manufacturers of Cylinder Liners

How Service Centers In India Clean And Degrease Engine Cylinder Liners?

▪ Know about Engine Cylinder Liners ▪ Steps to clean Engine Cylinder Liners ▪ ▪ ▪ ▪

Pressure Wash Soak in for Safe Cleaning Scrub Rinse and Repeat to get Clean Parts

▪ Conclusion ▪ Contact

Know About Engine Cylinder Liners Manufacturers and service providers of engine cylinder liners conduct various processes to clean and degrease engine liners and spares. The initial steps involve cleaning and degreasing of the parts. Even if the part is newly brought by you, it must be cleaned before use. Aluminium is a delicate metal to certain cleaners and if you use wrong cleaning agent, it may corrode and damage the top layer. However, the damage would be at microscopic level, still it affects the durability of the part.

Steps to clean Engine Cylinder Liners Let’s learn how Indian service centers clean Engine Cylinder Liners step by step.

1. Pressure Wash 2. Soak in for Safe Cleaning 3. Scrub 4. Rinse and Repeat to get Clean Parts

Steps to clean Engine Cylinder Liners 1. Pressure Wash This is the first step towards cleaning of aluminum parts. With pressure washer, you can remove excessive loose debris, such as grease chunks and dirt. It all depends on the size of the part- if you want to clean bigger parts, such as car frames, you should use higher powered gas pressure washer. But if you are having smaller parts to clean, you can use electric pressure washer for good results.

If the part does not have delicate areas or bends, you can set the washer pressure at “pencil� setting. With this setting, you can focus all the pressure at a point and remove dirt in few seconds. You need to be careful as the pressure can cut your skin if you mishandle the washer.

Steps to clean Engine Cylinder Liners 2. Soak In For Safe Cleaning Once the washer removes loose debris from the part, you can spray it with aluminium safe cleaner. Normal household products may degrade the part, so make sure you use specialized safe cleaners that are intended for cleaning delicate metals and alloys.

Steps to clean Engine Cylinder Liners

Fig- Showing before and after effect of using safe aluminium cleaner

Steps to clean Engine Cylinder Liners 3. Scrub After soaking the part for about 5 minutes, you can spray a little more and scrub it down using nylon brush. Scrubbing will give you dirt free, shining aluminium part.

4. Rinse And Repeat To Get Cleaner Part Once you are done with scrubbing, you can rinse it off with the pressure water. Repeat the scrubbing and rinse again with pressure washer.

Once it is done, you can rinse the part with hot water and blow-dry it.

Conclusion This is how most service centers clean ‘Made in India’ engine cylinder liners. You can also take advantage of these shared tips and clean and degrease your aluminium spares. Thanks for your time, do feedback!

Contact Us

Thank You