Internal Hex & One Piece Implants
Dentalis Bio Solution complies with ISO 13485, ISO 14001 and Council Directive 93/42/EEC Canadian Medical Devices Regulation.
Dentalis Bio Solutions USA 9650 E 148th St Noblesville, 46060 Indiana, USA Phone: 317-214-7076 For more info please refer to WWW.dentalis.us or to your local distributor For USA Only: Federal Law restricts this device to sale by or the order of licensed dentist or physician
The Perfect Match ™
Who we are Dentalis BioSolutions R&D is focused on becoming a leader in the application of nanotechnology, bioinorganic materials with wider functionalities “intelligent” bone substitutes life sciences. We strive to become the new industry standard for detection of molecular protein-Hormone-growth factor interactions. Dentalis R&D department is a unique combination of individual parts. We have assembled multi-disciplinary teams of scientists with diverse research and technical knowledge and life experiences. Our project teams are made of organic chemists, biologists, physicists, biochemists, and materials science engineers working side by side toward common goals. Our product development specialize in a wide range of fields, focusing on orthopedic and dental implant, research of Surface Science and Technology encompasses both analysis and modification of surfaces.
Our offer
Dentalis offers an extensive variety of bone and tissue level implants for all indication and bone types, which satisfies every clinician and selected treatment concept, such as one and two stage surgical, immediately or delayed loading protocol, solutions for a wide clinical situations from the basic to the most complex with wide range of length implants from 20 mm to 6.5 mm, wide & short implant, Narrow implant Ø 3 mm diameter designed specifically for limited spaces in the esthetic zone and limited ridge. All Dentalis implant are made from Titanium Alloy [Ti-6Al-4V] which is biocompatible medical grade. The surface of All Dentalis implant is roughened by biocompatible material (HA) and is free from any contamination (Aluminum oxide and acid traces).
Our belief
We believe that creativity and innovation in orthopedics implant and dentistry requires vision and commitment to patient quality of life. We are convinced that this focus must permeate and inspire everything we do, every day.
Our commitment
We are devoted to continue on providing high quality, groundbreaking oral healthcare solutions that create value for dental professionals and enhance their patients’ quality of life
Dentalis follows the most strict international quality standards, complying with ISO 13485:2003 quality management system for : Design, development & manufacture of Orthopedics, Bone Screw, Dental implant, Plates and other medical instrument.
All rights reserved. No Part of this publication may be reproduced, transcribed, stored in an electric retrieval system and translated into any language or computer language without the prior written consent of the Dentalis Bio Solution R&D.
Disclaimer of Liability
Dentalis implants is a part of an overall concept and may only be used in conjunction with the associated original components and instruments according to Dentalis instructions and recommendations. Use of any non- Dentalis products in conjunction with Dentalis implants will avoid any warranty Or any other obligation, expressed or implied, of Dentalis. Instructions as to application of our products take place verbally, in writing, by electronic media or in handson training corresponding to state of the art at the time of introduction of the product. The user of Dentalis product has the duty to determine whether or not any product is suitable for the particular patient and circumstances. Dentalis disclaims any liability, express or implied, and shall have no responsibility for any direct, indirect, punitive or other damage, arising out of or in connection with any errors in professional judgment or practice in the use or installation of Dentalis products.
Please note
The descriptions given are insufficient to allow immediate use of the Dentalis dental Implant Systems. Guidance in the handling of this instrument by a doctor experience in their use is strongly recommended.
Unit per package
Unless stated otherwise, there is one unit in each package.
Availability
Not all product listed in this brochure are available in all countries.
Validity Upon publication of this brochure, all previous versions are superseded.
Caution
As a general rule, our product must be secured against aspiration when used intra-orally.
Copyright and trademarks
All rights reserved. Dentalis documents may not be reprinted No Part of this publication may be reproduced, transcribed, stored in an electric retrieval system and translated into any language or computer language without the prior written consent of the Dentalis Bio Solution R&D, Dentalis- Dental implants system, Versatile implant, T1, S2, D2, Micro Cortical thread, BAS surface are registered trademarks . Some products may not be regulatory cleared/released for sale in all markets and not all may have been licensed in accordance with Canadian law. Please contact the local Dentalis sales office for current product range and availability.
Valid from 1 January 2013 until publication of new catalog. Note: In order to improve readability, Dentalis Bio Solutions does not use ™ or ® in the running text. By doing so, however, Dentalis does not waive any right to the trademark or registered mark and nothing here in shall be construed to the contrary.
The following third-party trademarks apply:
Ankylos® is a trademark of Dentsply Friadent Group, Astra Tech® of Astra Tech Group, Bredent™ of Bredent GmbH & Co. KG, Camlog® of Camlog Biotechnologies Group, Dolder® and Dalbo® of Cendres+Metaux SA, Lifecore® Biomedical Restore of Lifecore Biomedical Group, Locator® of Zest Anchors Inc, Sterngold® Implamed of Sterngold Group, Straumann® of Institut Straumann AG, Telio® CAD and IPS e.max® CAD of Ivoclar Vivadent AG, 3i® of Biomet Group, Thommen® of Thommen Medical AG, and Zimmer® Dental of Zimmer Group.
Dentalis Bio Solution complies with ISO 13485, ISO 14001 and Council Directive 93/42/EEC Canadian Medical Devices Regulation.
contents Explanation of the symbol
1
BAS Surface
2
S2 – Screw Implant S2 Narrow implant 3 mm S2 Standart Platform T3-Tapered Implant Tone piece implant Vi -Verstaile Implant Narroe platform Standart Platform VOne piece Anatomic VOne piece implant D2 -Dual Implant
3-8 4-5 6-8 9-15
Healing Abutment
34-35
Screw Type & Cemented Rehabilitation
36-43
Temporary Abutment Plastic structure for casting Non Hex Abutment Straight Abutment Zirconium Abutment Angled Abutment Anti-Rotation Aestheic Abutmen Straight adaptor Overdenture Ball Attachment Abutment Angular Ball Attachment Abutment Locator Abutment
36 37 38 38-39 40 41 42 43
Implant impression Transfer
16-31 17-18 19-23 24-27 28-31 32-33
44-46 44-45 46
Analog & Transfer
47-48
Surgical Kits, Tools, Surgial Drllis
50-60
51 54-55 56 56 57 57 58 58 59 60
Drivers & Tools Drills -External Irrigation Drills- Conical Ceramic Drill Counter Sink Trephine Burs Sinus Kit Paralel Pin Osteotomes Kit Professional Implantology Tools
Explanation of the symbols on labels and instructions for use Single Use
Do not re-sterilize.
Manufaturer
Date of manufactre
Use Before expiry date
Temperature limitation
Catalogue number
Lot / batch number/code
non-sterile
Sterlilzed using gamma irradiation
Keep away from sunlight
Protect from exaposre to light or heat
Attention,refer to instructions for use Caution:Federal (USA)law restricts this product to sale directly to, or on the order of a licened dentist Dentalis products carry the CE mark and fulfill the requirment of the medical Decices Directive 93/42 EEC
Do not use if package is damaged
GOST is the valid quality certification system in Russian Federation. xxxx identify the notified body of manufacturer
Extra Important when using Dentalis Implants
We strongly recommend that practitioners, new as well as experience implant user, always go through special training before undertaking a new treatment method. A training model and two dummy implants are also delivered with the surgical kit. Dentalis Bio Solution provides wide range of courses for various levels of knowledge. All products are subject to change without notice. Some products may not be available in all markets Please contact your local Dentalis Office for current product assortment and availabilty
Dentalis Bio Solutions USA, 9650 E 148th St, Noblesville, 46060, Indiana, USA
1
The Perfect Match ™
BAS™ Surface Introduction:
Bio Active Surface
Implant success is dependent on the osseointegration process. Successful osseointegration of bone growth around an implant is dependent on substrate properties, including surface morphology, chemical composition and surface energy. Dentalis’s dental implant innovation was developed and tested in three essential research levels and has the advantages to enhance immediate and successful osseointegration. _ entalis’s new implants encompass unique and advanced implant D macrotopography. Dentalis’s implant’s chemical composition is well characterized. Dentalis’s implant surface was produced with specific micron scale surface structures. Dentalis’s implants were examined and established under in vitro cell culture studies and in vivo conditions. In vitro findings have established that these specific surface structures enhanced osteoblast attachment, proliferation, differentiation, and mineralization. In vivo studies have confirmed the osteogenic effect of microstructures on Ti substrates. These surfaces improved bone to implant contact (BIC) in comparison with smooth surfaced implants, and this was correlated with greater removal torque strength. These observations suggest that Dentalis implants, inspired by bone biology, will improve your clinical performance and outcome. For more info about BAS ™ Surface and the Scientific Research Documentation In vitro & In vivo experiments please contact your local distributor.
2
S2
Dentalis S2™ is a two-pieces implants, slightly tapered with more pronounced apical taper allowing for under prepartion. with his desined S2 is recommenended for all bone typs, S2 can achive high primary stability in soft bone, and he is excellent for bone type 1 and 2 . S2 has Dual thread and Dual spiral channels With his designed S2 provide shorten drilling protocols, it is self driling, self tapping and self condensing bone .
Implants
S2 has the advantage to preserving the marginal bone with: Horizontal grooves produced by micro-machining impedes epithelial down growth on titanium implants. Micro threads provide enhanced initial stability and increases contact area to crestal bone, which will enhance osseointegration at the crestal bone level. Platform switching enables good adaptation of the gingival tissues to the abutment and prevents cervical bone resorption. with variety of length from 6.5 mm to 18 mm and range of Diamter from 3 mm to 6 mm S2 can provide clinical solutionfrom the basic to the most challenge situation.
3
The new narrow S2 Implant
The New S2 Ø 3 and Ø 3.3 mm diameter is designed specifically for limited spaces in the Esthetic zone and is placed easily with 2.0 and 2.5mm drills. This type of implants merging the latest technologies designed and surface treatment to provide excellent treatment in challenging medical situations. Dentalis S2 implants 3mm design to offers restorative flexibility in narrow spaces. The Ø 3mm threadform shown to be effective when immediately loaded. S2 can be use to Treat small spaces with confidence. The small diameter of the Dentalis implant is specially designed for the placement of single-unit maxillary lateral incisors, as well as mandibular and central incisors. Placing small diameter implants is confident, Our implants material provides high strength* and improved assurance when placing Narrow diameter implants, while the BAS™ surface accelerates the osseointegration Process, provide short time healing and helps deliver predictability in implant treatment.
Implants
S2 offer Variety of possibilities treatments options, Variety ranging prosthetic options with internal hex connection including screw retained and cement-retained restorations and variety possibilities of implant-level or abutment level impression workflow.
S2 Implant range Narrow Platform Length
10mm
11.5mm
13mm
16mm
Cat.No.
113010
113011
113013
113016
113310
113311
113313
113316
S2 – Screw Implant Ø 3 mm Narrow Platform
Product illustrations are not scale
Cat.No. S2 – Screw Implant Ø 3.3 mm Narrow Platform
* Small diameter implants are not recommended for use in the molar region. * Thread form shown to be effective when immediately loaded. * Fatigue strength according to ISO 14801 For more info please contact your local distributor
4
S2 Implant Narrow Platform Cover Screw
S2 – Screw Implant
Include with all implants. Use the Hand Driver-tighten with the 1.25mm- 050” Hex Driver.
Body Diameter Ø 3mm Apical Diameter 2.8 mm Length mm
10
Cat. No.
11.5
113010
113011
13 113013
16 113016
Minimum Ridge Width 5 mm
Healing Abutment Narrow Platform L:2,3,4,5 Page :13
Minimum Mesial / Distal Space 6 mm Micro & Mini Ring 3 mm | NP-Narrow Platform No Machined Collar Height
Straight Abutment
S2 – Screw Implant
Page :16
Body Diameter Ø3.3mm Apical Diameter 3.0 mm Length mm
10
Cat. No.
11.5
113310
113311
13 113313
16 113316
Minimum Ridge Width 5.3 mm
Angled Abutment 15° Narrow Platform
Minimum Mesial / Distal Space 6.3 mm Micro & Mini Ring 3 mm | NP-Narrow Platform
Page :19
Implants
No Machined Collar Height
Ball Attachment Narrow Platform L:2,3,4,5 Page :22
Page :25
HD- 1 Hex Driver Narrow Platform
Ø 3.2
Ø 2.8
Ø 2.5
Analog Narrow Platform
S2
Ø 3.0
S2
Ø 3.3
The Drilling sequrnce is demontrated by a 13 mm implant
Drill Speed (RPM)
12001500
9001200
8001000
500700
Drill Diameter (mm)
Ø 1.9
Ø2
Ø 2.5
Ø 2.8
Do not use the final drill for bone type 3-4 | Not all products are available in all market | Product shown not to scale
5
Procedure recommended by Dentalis implants cannot replace the judgment and the experience ot the surgeon.
Caution :Placement in the molar region is not recommended
Ø2
Recommendation : Bone Type D1 use the last drill up to 1/3 depth. Bone Type D2-3 use the last drill to the depth of the cortex. Bone Type D4 use the one before last drill desirable to the depth of the cortex For example:Implant diameter 3.3Ø in soft bone (D4) use the 2.8 Ø drill as a final drill just for the cortex.
S2 Implant range Standard Platform Length
6.5 mm
8mm
10mm
11.5mm
13mm
16mm
18mm
153708
153710
153711
153713
153716
153716
154206
154208
154210
154211
154213
154216
154218
154706
154708
154710
154711
154713
154716
155006
155008
155010
155011
155013
155016
156006
156008
156010
156011
156013
156016
Cat.No. S2 – Screw Implant Ø 3.75 mm Standard Platform
Cat.No.
Cat.No.
Implants
S2 – Screw Implant Ø 4.2 mm Standard Platform
For USA Only: Federal Law restricts this device to sale by or the order of licensed dentist or physician
S2 – Screw Implant Ø 4.7 mm Standard platform
Cat.No. S2 – Screw Implant Ø 5 mm Standard Platform
Cat.No. S2 – Screw Implant Ø 6 mm Standard Platform
Product illustrations are not scale
6
S2 – Screw Implant Body Diameter Ø 3.25mm Apical Diameter 3.2 mm Length mm Cat. No.
6.5
08
-
10
113208
113210
11.5 113011
13 113013
16 113016
Minimum Ridge Width 5.25 mm Minimum Mesial / Distal Space 6.25 mm Micro & Mini Ring 3 mm
| SP-Standard Platform
No Machined Collar Height
S2 – Screw Implant Body Diameter Ø 3.75mm Apical Diameter 3.2 mm Length mm Cat. No.
6.5 -
08
10
113708
113710
11.5 113711
13 113713
16 113716
Minimum Ridge Width 5.25 mm Minimum Mesial / Distal Space 6.25 mm
Implants
Micro & Mini Ring 3 mm
| SP-Standard Platform
No Machined Collar Height
| Platform Switching
S2 – Screw Implant Body Diameter Ø 4.2mm Apical Diameter 3.2 mm Length mm Cat. No.
6.5 114206
08
10
114208
114210
11.5 114211
13 114213
16
18
114216
114218
16
18
20 114220
Minimum Ridge Width 5.75 mm Minimum Mesial / Distal Space 6.75 mm Micro & Mini Ring 3 mm
| SP-Standard Platform
No Machined Collar Height
| Platform Switching
S2 – Screw Implant Length mm Cat. No.
6.5 114706
08
10
114708
114710
11.5 114711
13 114713
114716
114718
Minimum Ridge Width 5.75 mm Minimum Mesial / Distal Space 6.75 mm Micro & Mini Ring 3 mm
| SP-Standard Platform
Machined Collar Height 0.4mm | Platform Switching
7
Dentalis Bio Solution complies with ISO 13485 and Council Directive 93/42/EEC
Product illustrations are not scale
Body Diameter Ø 4.7mm Apical Diameter 3.2 mm
Hand Driver K2S K2L
S2 – Screw Implant Body Diameter Ø 5 mm Apical Diameter 3.2 mm Length mm Cat. No.
6.5
08
115006
10
115008
11.5
115010
13
115011
16
115013
115016
Minimum Ridge Width 5.75 mm Minimum Mesial/Distal Space 6.75 mm Micro & Mini Ring 3 mm
| SP-Standard Platform
Machined Collar Height 0.4mm | Platform Switching
L : 09 800912
L : 16 801612
Hex Driver Size : 2.4 K6S K6L
S2 – Screw Implant Body Diameter Ø 6 mm Apical Diameter 3.2 mm Length mm Cat. No.
6.5
08
116006
10
116008
11.5
116010
13
116011
16
116013
116016
Minimum Ridge Width 5.75 mm Micro & Mini Ring 3 mm
| SP-Standard Platform
L : 09 800925
Machined Collar Height 0.4mm | Platform Switching
L : 16 801625
Cover Screw
Include with all implants.Use the Hand Driver-tighten with the 1.25mm- 050” Hex Driver.
Motor Adaptor K8L K8S
Recommendation : Bone Type D1 use the last drill up to 1/3 depth. Bone Type D2-3 use the last drill to the depth of the cortex. Bone Type D4 use the one before last drill desirable to the depth of the cortex For example : Implant diameter 3.75Ø in soft bone (D4) use the 3.2 Ø drill as a final drill just for the cortex. 400600
300500
300500
Drill Diameter (mm)
Ø 1.8
Ø2
Ø 2.5
Ø 2.8
Ø 3.2
Ø 3.6
Ø 4.1
Ø 4.6
Ø 05.2
The Drilling sequrnce is demontrated by a 13 mm implant
S2
Ø 3.75
S2
Ø 4.2
Ø 4.6
Ø 4.1
Ø 3.6
Ø 3.2
S2
Ø 3.3
L : 15 832415
S2
Ø 4.7
S2 Ø5
L : 25 832425
Ø 4.8/ 5.8
400600
Ø 5.2
400700
Ø 3.6/ 4.1
500700
Ø 3.6/ 4.1
8001000
Ø 2.8
9001200
Ø 2.5
9001200
Ø2
Drill Speed (RPM)
S2
Ø 5.5
S2 Ø6
Do not use the final drill for bone type 3-4 | Not all products are available in all market | Product shown not to scale Procedure recommended by Dentalis implants cannot replace the judgment and the experience ot the surgeon.
8
Implants
Minimum Mesial/Distal Space 6.75 mm
T3
T3 is a Tapered two-pieces implants, with dual thread allows a moderate insertion rate its thread design enables a vertical condensation of the bone with Dual spiral channels and Domed Apex . Featuring: Horizontal grooves produced by micro-machining impedes epithelial down growth on Titanium implants.
Implants
Micro threads provide enhanced initial stability and increases contact area to crestal bone, which will enhance osseointegration at the crestal bone level to reduce Platform switching enables good adaptation of the gingival tissues to the abutment T3 have become the prefer implant especially in cases of immediate implant placement after tooth extraction. With his design T3 has extremely advantageous on bone type 4, where primary stability is difficult to achieve even in the commonly bone found in the maxillary tuberositymarks With the BAS™ surface T3 has a strong bond that is created between the implant surface and the surrounding bone . T3 is a self-drilling, self-tapping property of and its anatomic design optimize the bone compaction effect, improving bone density and providing better primary stability . T3 is available with diameters of 3.75, 4.2, 4.7, 5 mm and length from 8 to 16mm.
9
For USA Only: Federal Law restricts this device to sale by or the order of licensed dentist or physician
T3 Implant range Standard Platform Length
8mm
10mm
11.5mm
13mm
16mm
Cat.No.
123708
123710
123711
123713
123716
124208
124210
124211
124213
124216
124708
124710
124711
124713
124716
125008
125010
125011
125013
125016
T3 –Tapered Implant Ø 3.75 mm Standard Platform
Cat.No.
T3 –Tapered Implant
Cat.No.
Implants
Ø 4.2 mm Standard Platform
T3 –Tapered Implant Ø 4.7 mm Standard Platform
Cat.No.
T3 –Tapered Implant Ø 5.0 mm Standard Platform
Cover Screw Include with all implants.
Narrow Healing Abutment Ø3.5 Standard Platform L: 2, 3, 5, 7
Healing abutment Regular Ø 4.5 Standard Platform L: 2, 3, 5, 7
10
T3 – Tapered Implant Body Diameter Ø 3.75mm Apical Diameter 3.2 mm Length mm Cat. No.
08 123708
10
11.5
123710
123711
13 123713
Hand Driver K2S K2L
16 123716
Minimum Ridge Width 5.25 mm Minimum Mesial/Distal Space 6.25 mm Micro & Mini Ring 3 mm
| SP-Standard Platform
No Machined Collar Height
| Platform Switching
L : 09 800912
T3 – Tapered Implant Body Diameter Ø 4.2mm Apical Diameter 3.2 mm Length mm Cat. No.
08 124208
10
11.5
124210
124211
13 124213
L : 16 801612
Hex Driver Size : 2.4 K6S K6L
16 124216
Minimum Ridge Width 5.75 mm Minimum Mesial/Distal Space 6.55 mm
Implants
Micro & Mini Ring 3 mm
| SP-Standard Platform
No Machined Collar Height
| Platform Switching
L : 09 800925
T3 – Tapered Implant Body Diameter Ø 4.7mm Apical Diameter 4.7 mm Length mm Cat. No.
08 124708
10
11.5
124710
124711
13 124713
L : 16 801625
Motor Adaptor K8L K8S
16 124716
Minimum Ridge Width 5.75 mm Minimum Mesial/Distal Space 6.75 mm Micro & Mini Ring 3 mm
| SP-Standard Platform
Machined Collar Height 0.4 mm | Platform Switching
L : 15 832415
Cover Screw
Include with all implants.Use the Hand Driver-tighten with the 1.25mm- 050” Hex Driver.
Narrow Healing Abutment Ø3.5 Standaed Platform L: 2, 3, 5, 7
L : 25 832425
Healing abutment Regular Ø 4.5 Standaed Platform L: 2, 3, 5, 7
Dentalis Bio Solution complies with ISO 13485 ,CE -marked accordance with the Council Directive 93/42/EEC and amendment 2007/47/EC
11
Analog for Regular Platform Code: AR
T3 – Tapered Implant Body Diameter Ø 5mm Apical Diameter 4 mm Length mm Cat. No.
08
10
125008
11.5
125010
13
125011
16
125013
125016
Minimum Ridge Width 5.75 mm Minimum Mesial/Distal Space 6.75 mm |
No Machined Collar Height 0.4mm |
SP-Standard Platform Platform Switching
Code:AR
Straight Parallel Pins
Paralleling Pins
Purpose:Evaluation of osteotomy position and angle
15° Angled Parallel Pins
(2 per kit )
Provided straight or a 15° or 25° angle Used after Ø 2.0mm Starter Drill and Ø 2.5mm Depth Drill 9mm shank for radiographic evaluation of proxmimty to adjacent anatomy Hub diameter is 4.0mm
(2 per kit )
25° Angled Parallel Pins (2 per kit )
Implants
Micro & Mini Ring 3 mm
500700
400700
400600
400600
300500
Drill Diameter (mm)
Ø 1.8
Ø2
Ø 2.5
Ø 2.8
Ø 3.2
Ø 3.65
Ø 4.1
Ø 4.6
The Drilling sequrnce is demontrated by a 13 mm implant
Ø 3.6/ 4.1
Ø 3.6
Ø 3.6/ 4.1
Ø 4.1
Ø 4.6
T3
Ø 3.75
Ø 4.8/ 5.8
8001000
Ø 2.8
9001200
Ø 2.5
9001200
Ø2
Drill Speed (RPM)
Ø 3.2
Recommendation : to reduce the pressure in the bone around the implant neck: Bone Type D1 use the last drill up to 1/3 depth. Bone Type D2-3 use the last drill to the depth of the cortex. Bone Type D4 use the one before last drill desirable to the depth of the cortex For example : Implant diameter 3.75Ø in soft bone (D4) use the 3.2 Ø drill as a final drill just for the cortex.
T3
Ø 4.2
T3
Ø 4.7
T3 Ø5
Do not use the final drill for bone type 3-4 | Not all products are available in all market | Product shown not to scale Procedure recommended by Dentalis implants cannot replace the judgment and the experience ot the surgeon.
12
T3 One Piece Implant range Length
10mm
11.5mm
13mm
16mm
Cat No.
132910
132911
132913
132916
133310
133311
133313
133316
133710
133711
133713
133716
134210
134211
134213
134216
134710
134711
134713
134716
T1– Tapered One Piece Implant Ø 2.9 mm
Cat No.
T1– Tapered One Piece Implant Ø 3.3 mm
Cat No.
Implants
T1– Tapered One Piece Implant Ø 3.75 mm
Cat No.
T1– Tapered One Piece Implant Ø 4.2 mm
Cat No.
T1– Tapered One Piece Implant
13
For USA Only: Federal Law restricts this device to sale by or the order of licensed dentist or physician
Product illustrations are not scale
Ø 4.7 mm
T1– Tapered One Piece Implant Body Diameter Ø 2.9mm Apical Diameter 2.4 mm Length mm
10
Cat. No.
11.5
132910
132911
13 132913
16 132916
Minimum Ridge Width 4.95 mm Minimum Mesial / Distal Space 5.9 mm Micro & Mini Ring 3 mm
T1– Tapered One Piece Implant Body Diameter Ø 3.3mm Apical Diameter 2.8 mm Length mm
10
Cat. No.
11.5
133310
133311
13 133313
16 133316
Minimum Ridge Width 4.95 mm Minimum Mesial / Distal Space 5.9 mm Micro & Mini Ring 3 mm
T1– Tapered One Piece Implant Body Diameter Ø 3.75mm Apical Diameter 3.2 mm 10
Cat. No.
11.5
133710
133711
13 133713
16
Implants
Length mm
133716
Minimum Ridge Width 5.75 mm Minimum Mesial / Distal Space 6.75 mm Micro & Mini Ring 3 mm
8001000
500700
400700
400600
400600
Drill Diameter (mm)
Ø 1.8
Ø2
Ø 2.5
Ø 2.8
Ø 3.2
Ø 3.6
Ø 4.1
The Drilling sequrnce is demontrated by a 13 mm implant
Ø 3.6/ 4.1
Ø 3.6
Ø 2.5 T1
Ø 2.9
Ø 3.2
9001200
Ø 2.8
9001200
Ø2
Drill Speed (RPM)
Ø 4.1
Recommendation : to reduce the pressure in the bone around the implant neck: Bone Type D1 use the last drill up to 1/3 depth. Bone Type D2-3 use the last drill to the depth of the cortex. Bone Type D4 use the one before last drill desirable to the depth of the cortex For example:Implant diameter 3.3Ø in soft bone (D4) use the 2.8 Ø drill as a final drill just for the cortex.
T1
Ø 3.3
T1
Ø 3.75
Analog for One Piece Anatomic Cat :60023
Do not use the final drill for bone type 3-4 | Not all products are available in all market | Product shown not to scale Procedure recommended by Dentalis implants cannot replace the judgment and the experience ot the surgeon.
14
T1– Tapered One Piece Implant Body Diameter Ø 4.2mm Apical Diameter 4.2 mm Length mm
10
Cat. No.
11.5
134210
13
134211
16
134213
134216
Minimum Ridge Width 5.75 mm Minimum Mesial/Distal Space 6.55 mm Micro & Mini Ring 3 mm
T1– Tapered One Piece Implant Body Diameter Ø 4.7mm Apical Diameter 4.7 mm Length mm
10
Cat. No.
11.5
134710
13
134711
16
134713
134716
Minimum Ridge Width 5.75 mm Minimum Mesial/Distal Space 6.75 mm Micro & Mini Ring 3 mm
Implants
300500
Drill Diameter (mm)
Ø 1.8
Ø2
Ø 2.5
Ø 2.8
Ø 3.2
Ø 3.65
Ø4
Ø 4.5
Ø 4.6
Ø 3.6/ 4.1
400600
Ø 4.1
400600
Ø 3.6
400700
Ø 3.2
500700
Ø 2.8
8001000
Ø 2.5
9001200
Ø2
9001200
T1
Ø 4.2
Do not use the final drill for bone type 3-4 | Not all products are available in all market | Product shown not to scale Procedure recommended by Dentalis implants cannot replace the judgment and the experience ot the surgeon.
15
T1
Ø 4.7
The Drilling sequrnce is demontrated by a 13 mm implant
Drill Speed (RPM)
Ø 4.8/ 5.8
Recommendation : to reduce the pressure in the bone around the implant neck: Bone Type D1 use the last drill up to 1/3 depth. Bone Type D2-3 use the last drill to the depth of the cortex. Bone Type D4 use the one before last drill desirable to the depth of the cortex For example:Implant diameter 4.2Ø in soft bone (D4) use the 3.6 Ø drill as a final drill just for the cortex.
Verstaile Implant VI is a short name for Versatile because of the wide clinical range suitability of bone types, places and bone augmentation. The Vi Implant body designed with narrows conically core, while outer thread diameter of the cylinder remains almost the same, This design gives to VI the facilitating of the self-tapping property and enhance immediate stability. while the core is more tapered is condensing the bone, vertical and horizondual threads, with Dual spiral channels, MicroThreads, Platform switching and domed Apex. The new Vi offer also Horizontal grooves and, Unique grooved threads. Platform switching enables good adaptation of the gingival tissues to the abutment and prevents cervical bone resorption. Horizontal grooves produced by micro-machining impedes epithelial down growth on titanium implants. Micro threads provide enhanced initial stability and increases contact area to crestal bone, which will enhance osseointegration at the crestal bone level.
Implants
Smart Design Simple Use
superior advantages:
Unique grooved threads enhance bone stabilization during primary stabilization and increase the amount of bone to implant contact, which enhances osseointegration. Self-tapping cutting threads facilitate implant placementand enhance primary stability. Rough surface BAS™ which uses combination of resorbable blast material and mimics the surface produced by osteoclasts.Proven to induce bone in vitro and enhance osseointegration in vivo. Sharp threads and spiral deepening from cervical to apical region improve cutting ability with better bone to implant contact for better primary stability. For more info about BAS ™ Surface and the Scientific Research Documentation In vitro & In vivo experiments please contact your local distributor.
16
Vi -Narrow Platform-Implant range Length
10mm
11.5mm
13mm
16mm
Cat.No.
153010
153011
153013
153016
153310
153311
153313
153316
Vi - Ă˜ 3 mm Screw type implant Narrow platform
Cat.No. Vi - Ă˜ 3.3 mm Screw type implant Narrow platform
Narrow Vi Implants
Was designed especially for narrow spaces in the anterior region. it is a two-pieces implants, with body narrows conically, while outer thread diameter of the cylinder remains almost the same, facilitating the self-tapping property and enhancing immediate stability. With his design it is recommended for all bone types and can achive high primary stability in soft bone.
Sharp threads and spiral deepening from cervical to apical region improve cutting ability with better bone to implant contact for better primary stability Maximum bone preservation -Active Apex Apex with drilling blades enables smaller ostotomy.
17
with variety of length from 10 mm to 16 mm and Diamter range of from 3 mm to 3.3 mm.
Caution :Placement in the molar region is not recommended
Narrow Vi™ has Dual thread and Dual spiral channels With his design he can provide shorten drilling protocols, it is self driling, self tapping and self condensing bone and the advantage to preserving the marginal bone with Micro threads provide enhanced initial stability and increases contact area to crestal bone, which will enhance osseointegration at the crestal bone level.
Cover Screw
Vi – Screw Implant Body Diameter Ø 3mm Apical Diameter 2.6 mm Length mm Cat. No.
10
11.5
153010
13
153011
16
153013
153016
Minimum Ridge Width 5 mm
Include with all implants. Use the Hand Driver-tighten with the 1.25mm- 050” Hex Driver.
Healing Abutment Narrow Platform L:2,3,4,5 Page :13
Minimum Mesial/Distal Space 6 mm Micro & Mini Ring 3 mm | NP-Narrow Platform No Machined Collar Height
Straight Abutment
Vi – Screw Implant
Page :16
Body Diameter Ø3.3mm Apical Diameter 2.9 mm Cat. No.
10
11.5
153310
13
153311
16
153313
153316
Minimum Ridge Width 5.5 mm Minimum Mesial/Distal Space 6.5 mm Micro & Mini Ring 3 mm | NP-Narrow Platform No Machined Collar Height
Page :19
Ball Attachment Narrow Platform L:2,3,4,5 Page :22
Analog Narrow Platform
Vi
Ø 3.0
HD- 1 Hex Driver Narrow Platform
Ø 3.2
Ø 2.8
Ø 2.5
Ø2
Page :25
The Drilling sequrnce is demontrated by a 13 mm implant
Caution :Placement in the molar region is not recommended
Recommendation : to reduce the pressure in the bone around the implant neck: Bone Type D1 use the last drill up to 1/3 depth. Bone Type D2-3 use the last drill to the depth of the cortex. Bone Type D4 use the one before last drill desirable to the depth of the cortex For example:Implant diameter 3.3Ø in soft bone (D4) use the 2.5 Ø drill as a final drill just for the cortex.
Angled Abutment 15° Narrow Platform
Implants
Length mm
Vi
Ø 3.3
The Drilling sequrnce is demontrated by a 13 mm implant
Drill Speed (RPM)
9001200
9001200
8001000
500700
500700
Drill Diameter (mm)
Ø 1.8
Ø2
Ø 2.5
Ø 2.8
Ø 3.2
Do not use the final drill for bone type 3-4 | Not all products are available in all market | Product shown not to scale Procedure recommended by Dentalis implants cannot replace the judgment and the experience ot the surgeon.
18
Vi-Implant Range-Standart Platform Length
8mm
10mm
11.5mm
13mm
16mm
153208
153210
153111
153113
153216
153708
153710
153711
153713
153716
154206
154208
154210
154211
154213
154216
154706
154708
154710
154711
154713
154716
6.5mm
Cat No. VI –Versatile Implant Ø 3.25 mm Screw type implant Standard Platform
Cat No. VI –Versatile Implant Ø 3.75 mm Screw type implant Standard Platform
Cat No.
Implants
VI –Versatile Implant Ø 4.2 mm Screw type implant Standard Platform
Cat No. VI –Versatile Implant Ø 4.7 mm Screw type implant Standard Platform
Cover Screw
Include with all implants.Use the Hand Driver-tighten with the 1.25mm- 050” Hex Driver.
19
Narrow Healing Abutment Ø3.5 Standaed Platform L: 2, 3, 5, 7
Healing abutment Regular Ø 4.5 Standaed Platform L: 2, 3, 5, 7
Dentalis Bio Solution complies with ISO 13485 and Council Directive 93/42/EEC
Length
6.5mm
8mm
10mm
11.5mm
13mm
16mm
Cat No.
155006
155008
155010
155011
155013
155016
155506
155508
155510
155511
155513
155516
156006
156008
156010
156011
156013
156016
VI –Versatile Implant Ø 5 mm Screw type implant Standard Platform
Cat No. VI –Versatile Implant Ø 5.5 mm
For USA Only: Federal Law restricts this device to sale by or the order of licensed dentist or physician
Cat No.
Implants
Screw type implant standard platform
VI –Versatile Implant Ø 6 mm Screw type implant Standard Platform
Length
5.5mm
6.5mm
8mm
Cat No.
156555
156565
156508
Length
5.5mm
6.5mm
6mm
8mm
Cat No.
157055
157065
157060
156508
VI –Versatile Implant Ø 6.5 mm Screw type implant Standard Platform
VI –Versatile Implant Ø 7 mm Screw type implant Standard Platform
Product illustrations are not scale
20
VI – Versatile Implant Body Diameter Ø 3.25mm Apical Diameter 3.2 mm Length mm
6.5
Cat. No.
-
08
10
153708
153710
11.5 153711
13 153713
16 153716
Minimum Ridge Width 5.25 mm Minimum Mesial / Distal Space 6.25 mm Micro & Mini Ring 3 mm
|
SP-Standard Platform
No Machined Collar Height
VI – Versatile Implant Body Diameter Ø 3.75mm Apical Diameter 3.2 mm Length mm
6.5
Cat. No.
-
08
10
153708
153710
11.5 153711
13 153713
16 153716
Minimum Ridge Width 5.75 mm Minimum Mesial / Distal Space 6.75 mm
Implants
Micro & Mini Ring 3 mm
|
SP-Standard Platform
No Machined Collar Height
|
Platform Switching
VI – Versatile Implant Body Diameter Ø 4.2mm Apical Diameter 3.7 mm Length mm Cat. No.
6.5 154206
08
10
154208
154210
11.5 154211
13 154213
16 154216
Minimum Ridge Width 6.2 mm Minimum Mesial / Distal Space 7.2 mm Micro & Mini Ring 3 mm
|
No Machined Collar Height |
SP-Standard Platform Platform Switching
VI – Versatile Implant Body Diameter Ø 4.7mm Apical Diameter 4.2 mm Length mm Cat. No.
6.5 154206
08 154708
10 154710
11.5 154711
13 154713
16 154716
Minimum Ridge Width 6.7 mm Minimum Mesial / Distal Space 7.7 mm Micro & Mini Ring 3 mm
| SP-Standard Platform
No Machined Collar Height | Platform Switching
21
Dentalis Bio Solution complies with ISO 13485 and Council Directive 93/42/EEC
Hand Driver K2S K2L
VI – Versatile Implant Body Diameter Ø 5mm Apical Diameter 4.5 mm Length mm
6.5
Cat. No.
15506
08
10
155008
11.5
155010
155011
13 155013
16 155016
Minimum Ridge Width 7 mm Minimum Mesial / Distal Space 8 mm Micro & Mini Ring 3 mm
|
Machined Collar Height 0.4mm |
SP-Standard Platform Platform Switching
L : 09 800912
Hex Driver Size : 2.4 K6S K6L
L : 09 800925
Motor Adaptor K8L K8S
300500
Drill Diameter (mm)
Ø 1.8
Ø2
Ø 2.5
Ø 2.8
Ø 3.2
Ø 3.6
Ø 4.1
Ø 4.6
Ø 3.6
Vi
Ø 3.3
Ø 3.6 / 4.1 Vi
Ø 3.75
Vi
Ø 4.2
L : 15 832415
L : 25 832425
Ø 4.8/ 5.8
400600
Ø 4.6
400600
Ø 4.1
400700
Ø 3.6 / 4.1
500700
Ø 2.8
8001000
Ø 2.5
9001200
Ø2
9001200
Ø 3.2
Recommendation : to reduce the pressure in the bone around the implant neck: Bone Type D1 use the last drill up to 1/3 depth. Bone Type D2-3 use the last drill to the depth of the cortex. Bone Type D4 use the one before last drill desirable to the depth of the cortex For example:Implant diameter 3.75Ø in soft bone (D4) use the 3.2 Ø drill as a final drill just for the cortex. Drill Speed (RPM)
L : 16 801625
Implants
Cover Screw Include with all implants.
The Drilling sequrnce is demontrated by a 13 mm implant
L : 16 801612
Vi
Ø 4.7
Vi
Ø5
Do not use the final drill for bone type 3-4 | Not all products are available in all market | Product shown not to scale Procedure recommended by Dentalis implants cannot replace the judgment and the experience ot the surgeon.
22
Hand Driver K2S K2L
VI – Versatile Implant Body Diameter Ø 5.5mm Apical Diameter 3.2 mm Length mm Cat. No.
6.5
08
155506
10
155508
11.5
155510
13
155511
155513
16 155516
Minimum Ridge Width 7.5 mm Minimum Mesial / Distal Space 8.5 mm Micro & Mini Ring 3 mm
|
SP-Standard Platform
Machined Collar Height 0.4mm
|
Platform Switching
L : 09 800912
L : 16 801612
Hex Driver Size : 2.4 K6S K6L
VI – Versatile Implant Body Diameter Ø 6mm Apical Diameter 3.2 mm Length mm Cat. No.
6.5
08
156006
10
156008
11.5
156010
13
156011
156013
16 156016
Minimum Ridge Width 8 mm Minimum Mesial / Distal Space 9 mm Micro & Mini Ring 3 mm
|
SP-Standard Platform
Machined Collar Height 0.4mm
|
Platform Switching
L : 09 800925
L : 16 801625
Implants
Cover Screw
Include with all implants.Use the Hand Driver-tighten with the 1.25mm- 050” Hex Driver.
Recommendation : to reduce the pressure in the bone around the implant neck: Bone Type D1 use the last drill up to 1/3 depth. Bone Type D2-3 use the last drill to the depth of the cortex. Bone Type D4 use the one before last drill desirable to the depth of the cortex For example:Implant diameter 5.5Ø in soft bone (D4) use the 4.6 Ø drill as a final drill just for the cortex.
Ø 1.8
Ø2
Ø 2.5
Ø 2.8
Ø 3.2
Ø 3.6
Ø 4.1
Ø4.6
300500
Ø 5.8
Ø 5.2
Ø 4.8/ 5.8
Drill Diameter (mm)
300500
Ø 5.2
400600
Ø 4.6
400600
Ø 4.1
400700
Ø 3.6
500700
Ø 3.2
8001000
Ø 2.8
9001200
Ø 2.5
12001500
Ø2
Drill Speed (RPM)
Do not use the final drill for bone type 3-4 | Not all products are available in all market | Product shown not to scale
23
Procedure recommended by Dentalis implants cannot replace the judgment and the experience ot the surgeon.
Vi
Ø6
The Drilling sequrnce is demontrated by a 13 mm implant
Vi
Ø 5.5
Versatile One Piece Anatomic Introduction Dentalis One-Piece implants feature benefit The VOne Piece Anatomic implant encompasses the osseous component and restorative component in one piece. It Bring greater simplicity and convenience to the restoration process, One Piece, Titanium construction eliminates micro movement and saves time required to connect the abutment. This design is based on the one-stage placement concept and offers a number of possible advantages: V1 is especially design to restore with an excellent esthetic result in the mandibular central and lateral incisors or maxillary lateral, narrow implant diameters and tapered body design allow for various placement options in the esthetic zone. With 2.9 mm implant diameter allows placement in the limited tooth spacing of themaxillary laterals and mandibular laterals / incisors.
Implants
3.7mm and 4.7 implant diameters provide additional options in all tooth locations. VOne Piece Anatomic is Multi lead threads enable faster insertion while maintain implant stability with an integrated abutment designed for one stage surgical procedures and cemented restorations. Tissue friendliness: The surgery is performed only once, allowing the soft tissue to adapt to the implant / abutment interface without further manipulation. The Minute-Threads system enhances the contact area between implant and bone Horizontal Micro-Groove grooves produced by micro-machining will impede epithelial down growth on titanium implants. Micro and Mini Cortical Thread™ maintains the marginal bone and offers for this reason a good foundation for a long-term esthetic result. The BAS™ surface on V1 enables more rapid formation and greater amount of bone to implant contact during healing, Dentalis Bio Solution surfaced implant result in faster and stronger osseointegration and better maintenance of the initial implant stability . For more info about BAS ™ Surface and the Scientific Research Documentation In vitro & In vivo experiments please contact your local distributor.
24
V-One Anatomic range Length
10mm
11.5mm
13mm
16mm
Cat No.
152910
152911
152913
152916
153310
153311
153313
153316
153710
153711
153713
153716
154210
154211
154213
154216
Versatile One Piece Implant
Anatomic Ø 2.9 mm
Cat No. Versatile One Piece Implant
Anatomic Ø 3.3 mm
Cat No.
Implants
Versatile One Piece Implant
Anatomic
Ø 3.75 mm
Cat No. Versatile One Piece Implant
Anatomic Ø 4.2 mm
25
Dentalis Bio Solution complies with ISO 13485 and Council Directive 93/42/EEC
V1 – One Piece Anatomic Body Diameter Ø 2.9 mm Apical Diameter 2.5 mm Length mm
-
10
11.5
13
16
Cat. No.
-
153210
153211
153213
153216
Minimum Ridge Width 6.2 mm Minimum Mesial/Distal Space 7.2 mm Micro & Mini Ring 3 mm
V1 – One Piece Anatomic Body Diameter Ø 3.3mm Apical Diameter 2.8 mm Length mm
-
10
11.5
13
16
Cat. No.
-
153210
153211
153213
153216
Minimum Ridge Width 6.2 mm Minimum Mesial/Distal Space 7.2 mm
V1 Anatomic Ø 2.9
Analog for One Piece Anatomic Cat :60023
Ø 3.2
Ø 2.8
Ø 2.5
Ø2
Recommendation : to reduce the pressure in the bone around the implant neck: Bone Type D1 use the last drill up to 1/3 depth. Bone Type D2-3 use the last drill to the depth of the cortex. Bone Type D4 use the one before last drill desirable to the depth of the cortex For example:Implant diameter 3.3Ø in soft bone (D4) use the 2.8 Ø drill as a final drill just for the cortex.
Implants
Micro & Mini Ring 3 mm
V1 Anatomic Ø 3.3
Drill Speed (RPM)
12001500
9001200
8001000
500700
Drill Diameter (mm)
Ø 1.9
Ø2
Ø 2.5
Ø 2.8
Do not use the final drill for bone type 3-4 | Not all products are available in all market | Product shown not to scale Procedure recommended by Dentalis implants cannot replace the judgment and the experience ot the surgeon.
26
V1 – One Piece Anatomic Body Diameter Ø 3.75 mm Apical Diameter 3.2 mm Length mm Cat. No.
08
10
11.5
13
16
153708
153710
153711
153713
153716
Minimum Ridge Width 6.2 mm Minimum Mesial/Distal Space 7.2 mm Micro & Mini Ring 3 mm
V1 – One Piece Anatomic Body Diameter Ø 4.2 mm Apical Diameter 3.75 mm Length mm Cat. No.
08
10
11.5
13
16
154208
154210
154211
154213
154216
Minimum Ridge Width 6.2 mm Minimum Mesial / Distal Space 7.2 mm Micro & Mini Ring 3 mm
Implants
8001000
500700
400700
400600
400600
300500
Drill Diameter (mm)
Ø 1.8
Ø2
Ø 2.5
Ø 2.8
Ø 3.2
Ø 3.6
Ø 4.1
Ø 4.6
Ø 2.5
Ø 2.8
Ø 4.1
Ø 3.6/4.1
9001200
Ø 3.6
9001200
Ø 3.2
Drill Speed (RPM)
Ø2
Ø 4.8/ 5.8
Recommendation : to reduce the pressure in the bone around the implant neck: Bone Type D1 use the last drill up to 1/3 depth. Bone Type D2-3 use the last drill to the depth of the cortex. Bone Type D4 use the one before last drill desirable to the depth of the cortex For example:Implant diameter 3.75Ø in soft bone (D4) use the 3.2 Ø drill as a final drill just for the cortex.
The Drilling sequrnce is demontrated by a 13 mm implant
V1
Ø 3.75
V1
Ø 4.2
Analog for One Piece Anatomic Cat :60023 Do not use the final drill for bone type 3-4 | Not all products are available in all market | Product shown not to scale
27
Procedure recommended by Dentalis implants cannot replace the judgment and the experience ot the surgeon.
VO – Versatile One Piece Implant Introduction Dentalis One-Piece implants feature benefit The V1 implant encompasses the osseous component and restorative component in one piece. It Bring greater simplicity and convenience to the restoration process,One Piece, Titanium construction eliminates micro-movement and saves time required to connect the abutment. This design is based on the one-stage placement concept and offers a number of possible advantages: V1 is especially design to restore with an excellent esthetic result in the mandibular central and lateral incisors or maxillary lateral, narrow implant diameters and tapered body design allow for various placement options in the esthetic zone. With 2.9 mm implant diameter allows placement in the limited tooth spacing of themaxillary laterals and mandibular laterals / incisors.
Implants
3.7mm and 4.7 implant diameters provide additional options in all tooth locations. The V1 is Multi- lead threads enable faster insertion while maintain implant stability with an integrated abutment designed for one stage surgical procedures and cemented restorations. Tissue friendliness: The surgery is performed only once, allowing the soft tissue to adapt to the implant / abutment interface without further manipulation. The Minute-Threads system enhances the contact area between implant and bone Horizontal Micro-Groove grooves produced by micro machining will impede epithelial down growth on titanium implants. Micro and Mini Cortical Thread™ maintains the marginal bone and offers for this reason a good foundation for a long-term esthetic result. The BAS™ surface on V1 enables more rapid formation and greater amount of bone to implant contact during healing, Dentalis Bio Solution surfaced implant result in faster and stronger osseointegration and better maintenance of the initial implant stability. For more info about BAS ™ Surface and the Scientific Research Documentation In vitro & In vivo experiments please contact your local distributor.
28
V-One implant range Length
10mm
11.5mm
13mm
16mm
Cat No.
152910
152911
152913
1529016
153310
153311
153313
153316
153710
153711
153713
153716
154210
154211
154213
154216
Length
10mm
11.5mm
13mm
16mm
Cat No.
154710
154711
154713
154716
Versatile One Piece Implant Ø 2.9 mm
Cat No. Versatile One Piece Implant Ø 3.3 mm
Implants
Cat No. Versatile One Piece Implant Ø 3.75 mm
Cat No. Versatile One Piece Implant Ø 4.2 mm
Versatile One Piece Implant Ø 4.7 mm
29
Dentalis Bio Solution complies with ISO 13485 and Council Directive 93/42/EEC
V1 – Versatile One Piece Implant Body Diameter Ø2.9 mm Apical Diameter 3.2 mm Length mm Cat. No.
10
11.5
13
16
18
152910
152911
152913
152916
152918
Minimum Ridge Width 4.9 mm Minimum Mesial / Distal Space 5.9 mm Micro & Mini Ring 3 mm
V1 – Versatile One Piece Implant Body Diameter Ø 3.3 mm Apical Diameter 3.2 mm Length mm Cat. No.
10
11.5
13
16
18
153310
153311
153313
153316
153318
Minimum Ridge Width 5.3 mm Minimum Mesial / Distal Space 6.3 mm Micro & Mini Ring 3 mm
Body Diameter Ø 3.75 mm Apical Diameter 3.2 mm Length mm Cat. No.
Implants
V1 – Versatile One Piece Implant
HD - 4
10
11.5
13
16
18
153710
153711
153713
153716
153718
Hex Driver
Minimum Ridge Width 5.75 mm Minimum Mesial / Distal Space 6.75 mm Micro & Mini Ring 3 mm
VO
Ø 3.0
VO
Ø 3.3
Ø 3.6
Ø 3.2
Ø 2.8
Ø 2.5
Ø2
Recommendation : to reduce the pressure in the bone around the implant neck: Bone Type D1 use the last drill up to 1/3 depth. Bone Type D2-3 use the last drill to the depth of the cortex. Bone Type D4 use the one before last drill desirable to the depth of the cortex For example:Implant diameter 3.3Ø in soft bone (D4) use the 2.5 Ø drill as a final drill just for the cortex.
Analog for Versatile One Piece Cat :600023
VO
Ø 3.75
Drill Speed (RPM)
12001500
9001200
8001000
500700
400700
Drill Diameter (mm)
Ø 1.9
Ø2
Ø 2.5
Ø 2.8
Ø 3.2
Do not use the final drill for bone type 3-4 | Not all products are available in all market | Product shown not to scale Procedure recommended by Dentalis implants cannot replace the judgment and the experience ot the surgeon.
30
V1 – Versatile One Piece Implant Body Diameter Ø 4.2 mm Apical Diameter 3.75 mm Length mm Cat. No.
08
10
11.5
13
16
154208
154210
154211
154213
154216
Minimum Ridge Width 6.2 mm Minimum Mesial/Distal Space 7.2 mm Micro & Mini Ring 3 mm
V1 – Versatile One Piece Implant Body Diameter Ø 4.7 mm Apical Diameter 4.2 mm Length mm Cat. No.
8
10
11.5
13
16
154208
154210
154211
154213
154216
Minimum Ridge Width 6.7 mm Minimum Mesial/Distal Space 7.7 mm Micro & Mini Ring 3 mm
Implants
400600
400600
300500
Drill Diameter (mm)
Ø 1.8
Ø2
Ø 2.5
Ø 2.8
Ø 3.2
Ø 3.6
Ø 4.1
Ø 4.6
Ø 3.6
Ø 3.6/4.1
VO
Ø 3.0
VO
Ø 3.3
Ø 3.6/4.1 VO
Ø 3.75
Ø 4.6
400700
Ø 4.1
500700
Ø 2.8
8001000
Ø 2.5
9001200
Ø2
9001200
VO
Ø 4.2
Do not use the final drill for bone type 3-4 | Not all products are available in all market | Product shown not to scale
31
Procedure recommended by Dentalis implants cannot replace the judgment and the experience ot the surgeon.
VO
Ø 4.7
Product illustrations are not scale
Drill Speed (RPM)
Ø 3.2
Recommendation : to reduce the pressure in the bone around the implant neck: Bone Type D1 use the last drill up to 1/3 depth. Bone Type D2-3 use the last drill to the depth of the cortex. Bone Type D4 use the one before last drill desirable to the depth of the cortex For example:Implant diameter 3.75 Ø in soft bone (D4) use the 3.2 Ø drill as a final drill just for the cortex.
D2 D2 is a One-Stage implant that combined an implant and Ball Abutment the ball abutment can be change to the gum level with 4 level, or in case that the ball erosion. D2 offer also hex connection for straight or angular 15◦ abutments. D2 designed is for narrow alveolar ridges between closely spaced teeth or implant. Suitable for immediate loading and can fit to all bone types. Micro and Mini Cortical Thread™ maintains the marginal bone and offers for this reason a good foundation for a longterm esthetic result.
Implants
The BAS™ surface on V1 enables more rapid formation and greater amount of bone to implant contact during healing, Dentalis Bio Solution surfaced implant result in faster and stronger osseointegration and better maintenance of the initial implant stability.
D2 implant range Length
10mm
11.5mm
13mm
16mm
Cat No.
153010
153011
153013
153016
Length
10mm
11.5mm
13mm
16mm
Cat No.
153310
153311
153313
153316
D2 – Dual Implant Ø 3 mm Nerrow Two Piece implant
D2 – Dual Implant Ø 3.3 mm Nerrow Two Piece implant
For USA Only: Federal Law restricts this device to sale by or the order of licensed dentist or physician
32
Healing Abutment
D2 – Dual Implant Body Diameter Ø 3 mm Apical Diameter 2.4 mm Length mm Cat. No.
08
10
11.5
13
16
153008
153010
153011
153013
153016
Minimum Ridge Width 5 mm Minimum Mesial / Distal Space 6 mm Micro & Mini Ring 3 mm
L:2,3,4,5 Page :45 Ball Attachment D2 implant L:2,3,4,5 Page :58 Straight Abutment Page :48
D2 – Dual Implant Body Diameter Ø 3.3 mm Apical Diameter 2.8 mm Length mm Cat. No.
08
10
11.5
13
16
153708
153710
153711
153713
153716
Minimum Ridge Width 5.3 mm
Angled Abutment 15° for D2 Implant Page :52
Minimum Mesial / Distal Space 6.3 mm Micro & Mini Ring 3 mm
Implants
Analog for D2 Dual Implant Page :62
Hex Driver
Long HD-6
Short HD-5
Recommendation : to reduce the pressure in the bone around the implant neck: Bone Type D1 use the last drill up to 1/3 depth. Bone Type D2-3 use the last drill to the depth of the cortex. Bone Type D4 use the one before last drill desirable to the depth of the cortex For example:Implant diameter 3.3Ø in soft bone (D4) use the 2.5 Ø drill as a final drill just for the cortex.
Product illustrations are not scale
33
D2
Ø 3.0
Ø 3.2
Ø 2.8
Ø 2.5
Ø2
Hand Driver K2L K2S
L : 09 800912
D2
Ø 3.3
L : 16 801612
The Drilling sequrnce is demontrated by a 13 mm implant
Drill Speed (RPM)
12001400
9001200
7001000
400600
Drill Diameter (mm)
Ø 1.9
Ø2
Ø 2.5
Ø 2.8
Do not use the final drill for bone type 3-4 | Not all products are available in all market | Product shown not to scale Procedure recommended by Dentalis implants cannot replace the judgment and the experience ot the surgeon.
Healing Protocols Cover Screw Caps for two-stage protocol Purpose: Protects prosthetic-platform in two-stage (submerged) surgical protocols.Irrigate implants to remove blood and other debris, Remove Cover Cap from implant vial with 0.50”(1.25mm)Hex Driver, Hand- tighten(10-15 Ncm) utilizing 0.50”(1.25mm) Hex Driver An Antibacterial paste may be places on the end of the Cover Screw Cap to help decrease the risk of bacterial growth within the implant body during the healing phase. Following placement of the Cover Screw Cap, the surgical site should be irrigated and soft tissue adapted in a normal surgical fashion.Take precautions to prevent the Cover Screw Cap from being aspirated by the patient. Material Titanium
The Healing Abutment is specially designed to avoid bone grow on platform and to developing soft tissue emergence with Narrow, Regular, Wide Emergence or simple solutions internal system prosthetic components, by that to prepare for the specially designed bridge impression coping and remains in the jaw until soft tissue (the gums) heal. To be used as a transmucosal extraction extension secures to the implant during healing of intra-oral soft tissue following insertion of the implant to the bone or after second stage surgery. For esthetic result use appropriate Healing caps type, selected height a function of the thickness of the gums. Select the emergence profile that best suits the site being restored. The profile should match the transfer and abutment to be used Select the cuff height so that the top of the component protrudes slightly above the surrounding thickness tissue gums. The options are from 2mm to 7mm.
Placement of the Healing abutment After radiographic verification, a healing abutment screw is then placed, after uncovery two stage surgical protocol. Or in lieu of a Cover screw in a single-stage (non submerged) protocol. Prior to seating the Healing Abutment, thoroughly irrigate the inside of the implant to remove blood and other debris. An antibacterial paste may be placed on the screw portion to decrease the risk of bacterial growth within the implant body during the healing phase. Following seating, irrigate the surgical site and adapt the soft tissue in normal surgical fashion. A gingivectomy or apically positioned flap technique may be used to reduce the soft tissue thickness and to decrease sulcular depth around the implant.
Healing Abutment
Indication of use Healing Abutment
All Dentalis® keys are design that the tip is con to grab the healing cap for easy carry the Cover Screw onto the implant and thread it into place. Use the Hand Driver-tighten (10-15 Ncm ) with the 1.25mm- 050” Hex Driver. Dentalis implant is offering special tool for measuring the high level of the tissue for better esthetic result and wide range type of Healing abutment. Take precautions to prevent the Healing Abutment from being aspirated by the patient. Do not re-use Healing abutment. Material Titanium
To close the Healing Abutment use Final Torqe :10-15Ncm
34
Healing Abutment For D2 - One Piece Implant
Healing Abutments For Narrow Platform Implant H
Cat. NO.
H:2mm 300102
H:3mm 300103
H:4mm 300104
H
H:2mm 300202
H:5mm 300105
H:3mm 300203
H:4mm 300204
H:5mm 300205
Healing abutment Regular Ø 4.7
Narrow Healing Abutment Standaed Platform
H
H:2mm 300302
H:3mm 300303
H:5mm 300305
H:2mm 300402
H:7mm 300307
Healing Abutment Esthetic
Cat. NO.
H:3mm 300603
H:4mm 300604
H:5mm 300605
Cat. NO.
H:3mm 300403
H:5mm 300405
H:7mm 300407
Wide Healing Abutment
Narrow Temporary Abutment
Ø 4.5 300500
Ø 3.5 300800
Hand-tighten (10-15Ncm)utilizing. 0.50” (1.25mm) Hex Driver Hand Driver K2S K2L
Tissue Measuring Post
L : 09 800912
35
L : 16 801612
To close the Healing Abutment use Final Torqe :10-15Ncm
300202
Dentalis Bio Solution complies with ISO 13485 and Council Directive 93/42/EEC
Healing Abutment
Cat. NO.
Temporary Abutment A temporary non-hex abutment for immediate loading, made of Titanium
H
Cat. NO.
LS:1mm 300801
LS:2mm 300802
LS:3mm 300803
LS:4mm 300804
LS:5mm 300805
Hard 315001
Standard 315002
Restorative Products
The Plastic sleeve set available in 3 hardness levels, is connected by a “click” to the abutment
Soft 315003
Peek Temporary Abutment For fabrication of cement-or screw-retained provisional retorations ( up to 30days). made from Polymer with high performance, biocompatible thermoplastic designd for medical device application. The peek is an ideal substance for medical use in genral and dental use in particular packaged with Abutment Screw. Final Torqe:30Ncm Peek Temorary Straight Abutment packaged with Abutment Screw.
H
Cat. NO.
H:1mm 310701
H:2mm 310702
H:3mm 310703
Peek Temporary Angular Abutment 15°
Cat. NO.
PTA 15°-H:1 314151
PTA 15°-H:2 314152
PTA 15°-H:3 314153
Peek Temporary Angular Abutment 25°
PTA 25°-H:1 314251
PTA 25°-H:2 314252
PTA 25°-H:3 314253
36
Plastic structure for casting Available with two options: with or without a external hex that need to go in the internal Hex of the implant. They are without internal threading. The sleeve without the hexagon can be use for multi-implant tasks. The sleeve with the External hex is planned to manufacture a structure on set a crown or bridge that fits onto the abutment or just single implant. Plastic Sleeve
H:15
Cat. NO.
H
With Hex 310215
No Hex 310115
H:9mm 310509
Restorative Products
Straight Antomic Plastic Sleeve
H
Cat. NO.
H:1mm 310701
H:2mm 310702
H:3mm 310703
Angular Antomic Plastic Sleeve 15°
H: Height bucc mm 1, 2, 3
Cat. 15° - H:1mm 314151 NO.
15° - H:2mm 314152
15° - H:3mm 314153
Angular Antomic Plastic Sleeve 25°
Packaged with Abutment Screw
Cat. 25° - H:1mm NO. 314251
37
25° - H:2mm 314252
25° - H:3mm 314253 To close the Plastic Sleeve use Final Torqe :15Ncm
Non-Hex Abutment The use of non hex Abutment is for connecting two implants or more by using a permanent rod. The threaded type abutment has neither screw nor hex Can be use in permanent and final restoration. Use the Hand Driver-tighten with the 1.25mm- 050� Hex Driver. Made of Titanium Grade 5 Non-Hex Abutment
Non-Hex Abutment With Upper Hex
L:Vertical height
L:9mm 400309
L:13mm 400313
L:9mm 401309
L:13mm 401313
Restorative Products
Cat. NO.
Straight Abutment Straight Abutment for Narrow Platform
H: Height bucc mm 1, 2, 3
Cat. NO.
H:1mm 400101
H:2mm 400102
H:3mm 400103
Straight Abutment For Dual Implant
Cat. NO.
L:9mm 400201 To close the Abutment use Final Torqe :30Ncm
38
Straight Abutment Straight Abutment Narrow Ø 3.5 mm
L
Cat. NO.
L:5mm 400405
L:7mm 400407
L:9mm 400409
Straight Abutment Regular Ø 4.5 mm
Restorative Products
L H
Cat. NO.
H:1.5-L:9mm 400509
H:1.5-L:12mm H:1.5-L:15mm 400512 400515
Straight Abutment Wide
Straight Abutment for Emerged Profile
H:9mm
Cat. NO.
400610
400609
Straight Abutment With Shoulder TiN Coated [Ti-6Al-4V]
Esthetic Straight Abutment
L:9mm H
Cat. NO.
39
H:1mm 400701
H:2mm 400702
H:3mm 400703
To close the Abutment use Final Torqe :30Ncm
400801
For more info please refer to WWW.dentalis.us
Zirconium Anatomic Abutment Design for Ideal aesthetic solutions with Strong mechanical force. The shape of the anatomic abutment is planned also to reduce the technician’s working time. Made of Composed of 99.8% Zirconium that assists in achieving a strong and stable product. Zirconuim Anatomic Abutment
L H
Restorative Products
Cat. H: 1mm L:9mm H: 2mm,L:9mm H: 3mm,L:9mm 400901 400902 400903 NO.
Zirconuim Anatomic Angular Abutment 15°
H:Height bucc mm 1, 2, 3 Cat. NO.
15° - H :1 415151
15° - H :2 415152
15° - H :3 415153
To close the Abutment use Final Torqe :30Ncm
Zirconuim Anatomic Angular Abutment 25°
Cat. NO.
25°- H :1 415251
25°- H :2 415252
packaged with Abutment Screw.
25°- H :3 415253
Hand Driver K2L
K2S
Some products may not be available in all markets Please contact your local Dentalis Office for current product assortment and availabilty
40
Angled Abutment Angled Abutment 15° with Shoulder for Narrow Platform
L:9 H
Cat. NO.
H:1mm 411151
H:2mm 411152
H:3mm 411153
M 1.4 700023
Angled Abutment 15° for D2 Implant
Restorative Products
Cat. NO.
412150
1-72 UNF 700027
Angled Abutment Standard platform
Cat. NO.
10° 413101
15° 413150
15° 413151
25° 413259
Anatomic Angular Abutment 15°
Cat. No.
41
15° - H:1mm 414151
15° - H:2mm 414152
15° - H:3mm 414153
30° 413309
35° 413359
Anatomic Angular Abutment 25°
25°- H:1mm 414251
To close the Abutment use Final Torqe :30Ncm
25°- H:2mm 414252
25°- H:3mm 414253
Anti rotation Aesthetic Abutment AAA is short name, This abutment is design with two hex in the upper and bottom, A Plastic casting sleeve can be attached to the upper hex. The plastic sleeve are available with or without an internal hex that fit to the upper External hex of the abutment. This abutment can be suitable for single implant restoration, a screw retained bridge, and raising the height for performing various procedures, e.g., overdentures, bridges, bars and removable dentures. Available in four heights: 1, 2, 3 and 4 mm. Made of Titanium Grade 5.
Cat. No.
H:1mm 501101
H:2mm 501102
H:3mm 501103
H:4mm 501104
Cat. No.
300201
300202
300203
300204
Restorative Products
H
Hand Driver K2S K2L Plastic Casting Sleeve
Cat. No.
With Hex 501101
Without Hex 501102
L : 09 800912
L : 16 801612
For more info please refer to WWW.dentalis.us
42
Straight adaptor A especially design to facilitate the installation of the overdenture system on nonparallel implants, this type of adaptor has an upper cone that can solve the lack of parallelism. The impression-taking is performed over the installed adaptors The overdentnure system is screwed to the cone. Available in different heights Made of Titanium Alloy [Ti-6Al-4V]
H
Restorative Products
Cat. NO.
H:1mm 502001
H:2mm 502002
H:3mm 502003
H:4mm 502004
Implant Analog for Narrow Platform
Plastic Casting Sleeve
Cat. NO.
With Hex 501101
H:5mm 502005
Without Hex 501102
L:3mm 300203
600013
Multi Unit Angular Adaptor
Cat. NO.
43
17째 H:1.5 503171
30째 H:1.5 503301 To close the Abutment use Final Torqe :30Ncm
Ball Attachment Abutment The Ball Attachment abutment is use to supported implant retained overdentures. This type of abutment can connects a detachable prosthesis to an implant with the Metal Cap that is on the overdenture. It can provide solid stabilization, retention of the overdenture and tissue-supported with easy fast and reliable way. They are recommended for relatively parallel implants. The Ball Attachment abutments come with a Metal cap and silicon cap. Three 3 types of Silicon caps that are available in three level of hardness, 1-3, from the softest to the hardest. Ball Abutment may be use as indirect transfer impression. Ball Abutment Analogs on facing page are used for the production of a working cast. The Ball Attachment It made of Titanium Grade 5. The Metal cap is made of stainless steel. Ball Attachment for Nerrow Platform Ă˜ 3mm-Code BAN
Cat. No.
H:1mm 451021
H:2mm 451022
H:3mm 451023
Overdenture
H
H:4mm 451024
Ball Attachment for D2 implant-Ă˜ 3 mm Code BAD
For more info please refer to WWW.dentalis.usa
Cat. H:1mm No. 451031
H:2mm 451032
H:3mm 451033
Silicon Cap
Cat. No.
Hard-SCH
461001
Regular-SCR
300102
Sofet-SCS
461003
H:4mm 451034
Metal Cup
Protective Disk
460000
300101
To close the Abutment use Final Torqe :30Ncm
44
BAR-Ball Attachment for Regular platform Ă˜ 3.5 mm
H
Cat. No.
H:1mm 452041
H:2mm 452042
H:3mm 452043
Silicon Cap
Overdenture
Cat. No.
Hard-SCH
461001
Regular-SCR
300102
Sofet-SCS
461003
H:4mm 452044
H:5mm 452045
H:6mm 452046
Metal Cup
Protective Disk
460000
300101
H:7mm 452047
H:8mm 452048
Hand Driver K2S K2L
L : 09 800912
L : 16 801612
Used to represent the Ball Abutment Implant assembly in the working cast.Only used in conjunction with Ball Attachment Abutment
All products are subject to change without notice.
45
Cat. 600013 No.
For more info please refer to WWW.dentalis.usa
Ball Attachment Analogs
Locator Abutment Dentalis Locator Attachments is intended for use with partial dentures or full overdentures with more than two implants. This attachment abutment type can increases the available opportunities for removable implant prosthetics, through it’s low vertical height profile, range of divergence, dual retention, and self-aligning ability. This type of properties makes the Locator easy for patients to use, easily seat the overdenture without attaining accurate alignment of the attachment components. It is even possible to use them on implants with a divergence of up to 40º degrees. It also offers three options for the fabrication of a resilient attachment on an implant-supported cast alloy or milled titanium bar.
Cat. No.
H:0mm 470000
H:1mm 470001
H:2mm 470002
H:3mm 470003
Cat. No.
H:4mm 470004
H:5mm 470005
H:6mm 470006
H:7mm 470007
Silicon Cap set (0-10°)
Cat. 0-10°-1 No. 471001
0-10°-2 471002
Protective Disk
Cat. No.
473002
0-10°-3 471003
Overdenture
H
Silicon Cap set (10°-20°)
10°-20°-1 10°-20°-2 10°-20°-3 471001 472002 472003
Metal Cap
473001
Dentalis Bio Solution complies with ISO 13485, ISO 14001 and Council Directive 93/42/EEC
46
Analog & Transfer
Analog & Transfer
For the preparation of laboratory models. Impression Transfer (Impression copy). Hexagon Impression Transfer is made of stainless steel and available for Closed tray - round edges and short screw. Open tray - sharp edges and long screw. The function of an implant level impression is to exactly transfer to a laboratory model the position of the implant in relation to natural teeth or other implants as well as the soft tissue contours. An Implant Level impression can be takes at different stages during treatment and is dependent on Physician /operator preferences: At time of primary surgery – for one stage techniques, or to enable the delivery of a provisional crown at second stage surgery or at the second stage surgery. Impression Transfer closed-tray, transfer impression technique is designed to transfer the implant’s position and the soft tissue profile as well as the hex location, position, Indirect Transfers remain attached to the implants when the closed-tray impression is removed out from the mouth. The transfer hast to retrieve from the implant, mated to the related Implant Analog, and placed into its related impression hole. To fabricate a working cast containing a replica of the implant in the patient’s mouth, the impression is poured in dental stone. Implant-level open-tray, pick-up impression technique: Designed to position the transfer implant’s as well soft tissue profile and hex location, position, Direct Transfers are held firmly within the open-tray impression as it is removed from the mouth. Therefore, the central transfer screw should remove before the impression can be released out from the mouth. This transfer procedure requires a custom tray or modified stock tray with screw access holes in the areas occlusal to the implants. The Implant Analog is connected to the transfer embedded within the impression, then the impression is poured in dental stone to fabricate a working cast containing a replica of the implant in the patient’s mouth. Made of stainless steel.
Cat. No.
Cat. No.
47
Analog for Narrow Platform
Analog for Regular Platform
Analog for D2 Implant
Analog for Versatile One Piece
600003
600030
600013
600023
Analog for Ball Attachment
Implant Analog for Anti rotation Abutment
Implant Analog for Straight adaptor
Analog for One Piece Anatomic
600016
600017
600018
600023
Transfer
Cat. No.
Transfer , Impression for Regular Platform
H:9mm 611209
H:9mm 610103
H:15mm 611315
Transfer Screw
H:9mm 700035
H:15mm 700036
Analog & Transfer
Transfer , Impression for Narrow Platform
Clip Transfer
This one piece product was design to simplified the method of impression it’s intend of use is for places with a limited intermaxillary space for a driver like the back teeth where the lack of space does not allow both the screw and the driver to fit in. Suitable for closed tray method with higher precision and for parallel implants only. The Clip impression transfer is offering a quick impression with no affixing screw. It is not required to remove or to insert the transfer as it remains in the impression throughout the process. Note: The Clip Transfer doesn’t completely replace the use of standard transfer.
Clip Transfer
Cat. H:9mm No. 612409
H:15mm 612415
48
49
Surgical Instrumentation
Surgical Instrumentation
50
Drivers & Tools L
Surgical Instrumentation
801509
Stainles steel
K2S - Short Hand Driver to close abutment Hex Size : 1.2 L : 09
810912
Stainless steel
K2L - Long Hand Driver to close abutment Hex Size : 1.2 L : 16
811612
Stainless steel
K3S - Short Hand Driver to close abutment Hex Size :1.8 L : 09
820918
Stainless steel
K3L - Long Hand Driver to close abutment Hex Size : 1.8 L : 16
821618
Stainless steel
K4S - Short Hex Driver to close abutment with ratchet / Torque . Hex Size :1.2 L : 09
800912
Stainless steel
K4L - Long Hex Driver to close abutment with ratchet / Torque. Hex Size :1.2 L : 16
801612
Stainless steel
K5S - Short Hex Driver to close abutment with ratchet / Torque . Hex Size :1.8 L : 09
800918
Stainless steel
K5L - Long Hex Driver to close abutment with ratchet / Torque . Hex Size :1.8 L : 16
801618
Stainless steel
K6S - Short Hex Driver to Placing implants with internal Hex . Hex Size : 2.5 L : 09
800925
Stainless steel
K6L - Long Hex Driver to Placing implants with internal Hex . Hex Size :2.5 L : 16
801625
Stainless steel
K7 - Retrieving ScrewTo release structure from implant.
830001
Stainless steel
K8 - Short Adaptor inserting the implant using a hand piece
832420
Stainless steel
K8 - Long Adaptor inserting the implant using a hand piece
832425
Stainless steel
K9 - Adaptor For prosthetic accessories using a hand piece with torque
831221
Stainless steel
900004
Stainless steel
Drill Extension
51
Dentalis Bio Solutions USA, 9650 E 148th St, Noblesville, 46060, Indiana, USA
For more info please refer to WWW.dentalis.usa
K1L - Long Hand Driver to close abutment for Narrow platform Hex Size : 0.9 L : 16
Start Drill Guide Drill To mark out and create the insertion point penetrating cortex to evaluate bone quantity and quality
Cat. 900000 No.
Pilot Drill Optional drill to guide succeeding with twist drills, e.g. suitable to facilitate soft bone situation Cat. Ø 1.8 mm No. 900005
Twist drill
Twist drill
Twist drill
Twist drill
Twist drill
Twist drill
Twist drill
Twist drill
Cat. Ø 2.0mm No. 911620
Ø 2.5mm 911625
Ø 2.8mm 901628
Ø 3.2mm 901632
Ø 3.6mm 901636
Ø 4.1mm 901641
Ø 4.6mm 901646
Ø 5.2mm 901652
Ø 5.8mm 901658
Drilling depth The drilling depth is measured from the drill tip up to the indication line. the additional depth or tip height created by the point of the drill is 0.6 to 2.5 mm, depending on the diameter and type of drill. 5.2 mm
+0.9 mm
+1. mm
+1.2 mm
+1.35 mm
+1.6 mm
6.5mm
4.6 mm
8mm
4.1 mm
10mm
+0.8 mm
3.6 mm
11.5mm
+0.6 mm +0.7 mm
3.2 mm
13mm
2.0 mm 2.5 mm 2.8 mm
5.8mm
+2.5mm
3.5mm Ø2.5
* Internal irrigation drillis are available *
52
Surgical Instrumentation
Twist drill
16mm
Dentalis Bio Solution complies with ISO 13485 and Council Directive 93/42/EEC
Drills- External Irrigation
Short Drills External irrigation Twist drill
Twist drill
Twist drill
Twist drill
Ø 2 mm 901120
Ø 2.5 mm 901125
Ø 2.8 mm 901128
Ø 3.2 mm 901132
Ø 3.6 mm 901136
Ø 4.1 mm 901141
Ø 4.6 mm 901146
Ø 5.2 mm 901152
6.5mm
Twist drill
8mm
Twist drill
11.5mm 10mm
Twist drill
3.5mm Ø 2.8
Long Drills External irrigation Twist drill
Twist drill
Ø 2 mm 902020
Ø 2.4 mm 902024
Ø 2.8 mm 902028
Ø 3.2 mm 902032
Ø 3.6 mm 902036
Ø 4.1 mm 902041
10mm
Twist drill
13mm 11.5mm
Twist drill
16mm
Twist drill
18mm
Cat. No.
Twist drill
20mm
Surgical Instrumantetion
Cat. No.
Twist drill
3.5mm Ø 3.2
53
Ø 3.6mm 921628
Ø 4.2mm 921637
Ø 4.7mm 921640
Surgical Instrumentation
Conical Drill
6.5mm
Conical Drill
16mm
Cat. Ø 2.4mm No. 921622
Conical Drill
8mm
Conical Drill
13mm 11.5mm 10mm
Conical Drill
6.5mm
Ø 2.4 mm Ø 2.8mm 931624 931628
8mm
Ensures smooth and precise surgery Sharp tip blade-easy penetration Large chip spaces laser marking Biocompatible Free of metal
Cat. Ø 2 mm No. 931620
13mm 11.5mm 10mm
The innovative ceramic pilot drills are made high performance mix of Zirconia oxide and Alumina oxide. featuring an excellent cutting performance, reduce vibration, smooth operation, it offer the possibility of working without metal, thus offering biocompatible and antiallergenic operation, Corrosion free, wear resistance can be used between 50 to 100 drills .They are ideal suited for initial preparation of the implant site axis and depth high sharpness and optimal cutting efficiency, requires about half the torque of steel drills.
16mm
For more info please refer to WWW.dentalis.usa
Ceramic Drills
54
Counter Sink Purpose: Remove cortical bone at ridge crest to faclitate pressure-free seating of the implant collar *Site Specific Indicated when dense cortical bone is present at the crest * Rounded non-end cutting hubcenters drill in osteotomy *Used folowing the final width increasing drill for each implant
Surgical Instrumentation
Cat. Ø 3.75 mm No. 902020
Ø 4.2 mm 902024
Ø 4.7 mm 902028
Ø 5.5 mm 902032
Ø 6 mm 902036
Ø 6.5 mm 902041
Trephine Burs for harvesting bone and implant removal
55
6.5mm
8mm
10mm
Inner Ø 5mm Outer Ø 6mm 951660 11.5mm
Inner Ø 4mm Outer Ø 5mm 951650 13mm
Inner Ø 3mm Outer Ø 4mm 951640
16mm
Inner Ø 2mm Outer Ø 3mm Cat. 951630 No.
872832
873236
873643
874348
Straight Osteotomes Kit
2-2.8 Ø 872028
2.8-3.2 Ø 3.2-3.6 Ø 3.6-4.3 Ø 4.3-4.8 Ø 872832 873236 873643 874348
882028
882832
883236
883643
Angular Osteotomes Kit
2-2.8 Ø 882028
2.8-3.2 Ø 3.2-3.6 Ø 3.6-4.3 Ø 4.3-4.8 Ø 882832 883236 883643 884348 13mm 11.5mm 10mm 8mm 6.5mm 4mm
Cat. No. 872028
56
Surgical Instrumentation
Sinus Kit
Professional Implantology Tools Handle
Mallet
Ratchet Torque Ratchet Wrench
Surgical Instrumentation
Parallel Pin Kit
Purpose:Evaluation of osteotomy position and angle Provided straight or a 15° or 25° angle Used after Ø 2.0mm Starter Drill and Ø 2.5mm Depth Drill 9mm shank for radiographic evaluation of proxmimty to adjacent anatomy Hub diameter is 4.0mm Straight Parallel Pins
(2 per kit )
Tissue Punch Driver
Tissue Measuring Post
15° Angled 25° Angled Parallel Parallel Pins Pins (2 per kit )
(2 per kit )
Depth Gauge
Ø1.8
Ø2.4
Ø2.8
Ø3.2
Ø3.6
Ø4.1
Cat. 861821 862421 862821 863221 863621 864121 No.
57
6.5mm
8mm
10mm
11.5mm
13mm
Depth Gauge Kit
Dentalis Bio Solution complies with ISO 13485, ISO 14001 and Council Directive 93/42/EEC Canadian Medical Devices Regulation.
For USA Only: Federal Law restricts this device to sale by or the order of licensed dentist or physician All products are subject to change without notice. Some products may not be available in all markets Please contact your local Dentalis Office for current product assortment and availabilty
58
Dentalis Bio Solutions USA 9650 E 148th St Noblesville, 46060 Indiana, USA Phone: 317-214-7076 For more info please refer to WWW.dentalis.us or to your local distributor