Network Appliance NS0-184 NetApp Certified Storage Installation Engineer, ONTAP
NS0-184Exam
A. the Hardware Universe Web-based tool B. the Synergy application C. the Config Advisor application
NetApp Support for all future questions with low
Answer: ACD 3.You are preparing to physically install a new AFF A400 cluster into a customer’s racks. All equipment has been delivered to the customer’s site. Which three tools do you need to complete this installation? (Choose three.)
BestWayToPassNetApp
A. Visit the NetApp MySupport Site and look for the Express Guides, they will guide you through the daily tasks and provide input and output examples. B. If you have a specific issue, you can visit the Knowledge Base Web site C.(https://kb.netapp,com).Theanswerstoanyof your questions can be found on the NetApp SmartSolve site D.(http://smartsolve.netapp.com).Youshouldopenacasewith
Download
NS0-184ExamDumpsPDF-
1. Upon finishing the Installation of a new system for a customer, they request that you train them on how to administer the system. In this scenario, which two responses are appropriate? (Choose two.)
Answer: AC 2.You are asked to install six shelves to a production cluster. The cluster is running clustered Data ONTAP and is a 4-node cluster. All six shelves will be cabled to the same HA pair. The customer wants you to assign all the new disks to a single node in the Whichcluster.three tools would help you accomplish this task? (Choose three.)
D. the My AutoSupport Web-based tool E. the System Setup application
A. additional network cables B. Phillips #2 screwdriver C. laptop computer D. slide rail kit E. cable management tray
priority and include the keyword "Training" in the title.
Answer: notifications4.Yourguide.html#step-1-prepare-for-installationReference:Explanation:A,B,Chttps://docs.netapp.com/us-en/ontap-systems/a400/install-detailed-customerwantsanewlyinstalledAFFC190clustertosendSNMPtoatraphostcalledOVERWATCH01.
FCVI-Module, Controller, Serial-Port, FlashCache-Module B. SAS-Module, Controller, USB-Port, FlashCache-Module C. NVRAM-Module, Controller, Serial-Port, FlashCache-Module D. Powersupply, Controller, USB-Port, NVRAM-Module
components
Download
(Choose two.)
B.
a
highlighted
Answer: A 6.After the installation of a new ONTAP 9.8 cluster, you have to verify if works.
Which
D.
which two
A. Configure an SNMP community string on the cluster. Configure DNS on the cluster. Configure a trap host on the cluster. Configure a firewall policy and allow SNMP.
Answer: BC the Exhibit button. set of on FAS9000 are in the exhibit?
In scenario, statements are correct?
C.
A.
AutoSupport
5.Click
this
Download NS0-184ExamDumps NS0-184Exam In this scenario, which two commands would you use to accomplish this task? (Choose two.) A. system node autosupport history show B. system node autosupport check show C. system node autosupport destination show D. system node autosupport invoke Answer: You7.Clicken/ontap/pdfs/sidebar/Troubleshoot_AutoSupport.pdfReference:Explanation:A,Bhttp://docs.netapp.com/us-theExhibitbutton.wanttoaddanAFFA400systemtoanexisting4-node cluster. Referring to the exhibit, which number points to the ports that are used to cable the new nodes to the cluster interconnect switches. A. 1 B. 2 C. 3 D. Answer:4 8.Youguide.html#option-1-cable-the-controllers-to-a-single-drive-shelfReference:Explanation:Bhttps://docs.netapp.com/us-en/ontap-systems/a400/install-detailed-completedtheinstallationofanAFFA700swithNetAppCN1610switches. You used ports e0a and e0f with breakout cables to connect the controllers to the interconnect switches. After completing the cluster setup, ports e0e and e0i are not
In this scenario, what caused this problem?
NS0-184Exam
C. You must first enable the ports using the network port modify command.
Answer: You10.Clickrelationship-93-later-task.htmlReference:Explanation:A,Dhttps://docs.netapp.com/us-en/ontap/peering/create-cluster-theExhibitbutton.areaskedtoinstallanewclusterwithsixFAS8060nodes.Whilerunning
Download DumpsPDF-
BestWayToPassNetApp
Config Advisor, you see the messages shown in the exhibit. The customer does not want ACP cabled on their cluster. Which two actions would allow the installation to be completed successfully? (Choose A.two.)Advise NGS that the customer has a controller in an unsupported state.
C. Advise the sales team that the customer is operating without ACP and that the customer is asking you to leave it that way.
A. Peering authentication status can be verified with the cluster peer show command.
A. Breakout cables were used and the second port on the same ASIC became B.disabled.Thisis a hardware error and you must open a case with NetApp Support.
Answer: C 9.You are setting up a peer relationship between two ONTAP clusters.
B. Peering authentication can be configured using LDAP users and groups.
In this scenario, which two statements are true regarding authentication?
C. Peering authentication is required before enabling peering encryption.
D. Peering authentication can use an ONTAP generated passphrase.
visible in OnCommand System Manager.
D. You are missing a license to enable those ports.
B. Advise the customer that they must acknowledge that they are not using ACP on the installation.
Download NS0-184ExamDumpsPDFBestWayToPassNetApp NS0-184Exam
A. Active IQ Config Advisor B. NetApp Documentation Center C. NetApp Knowledge Base D. Active IQ Digital Advisor
11.You
that
Answer: BC are installing an AFF A700 system with two disk shelves using ADPv2. After setting up the cluster, you realize that one drive shelf was powered off and that the drives have not been assigned to any of the nodes. this scenario, which two resources will help you find a solution? (Choose two.)
D. customer the error will cause the controller to not operate properly state.
and create an unsupported
Advise the
In
Answer: Answer:D.connectC.B.connectA.Whattwo13.Youstretch/concept_configuring_the_mcc_software_in_ontap.adocReference:Explanation:Answer:D.C.B.A.InONTAP12.Anguide.html#option-1-cable-the-controllers-to-ds212c-or-ds224c-drive-shelvesReference:Explanation:A,Chttps://docs.netapp.com/us-en/ontap-systems/fas9000/install-detailed-administratorissuedtheclustersetupcommandandconfigureda2-node9.8cluster.thisscenario,whichtoolwouldtheadministratorusetovalidatetheconfiguration?ActiveIQUpgradeAdvisorInteroperabilityMatrixToolNetAppDocsActiveIQConfigAdvisorChttps://github.com/NetAppDocs/ontap-metrocluster/blob/main/install-havea2-nodeswitchlessclusternamedclusterA.YouareplanningonaddingadditionalnodestoclusterA.mustyouconsiderbeforeyouaddtheaddiHonalnodestoclusterA?ConvertclusterAtoaswitchedclusterbymigratingthedatalIFsfromdirecttodieclusterinterconnectswitch.ConvertclusterAtoasingle-nodecluster.ConvertclusterAtoaswitch**clusterbymigratingtheclusterLIFsfromdirecttotheclusterinterconnectswitch.UsedirectconnecttoaddtheadditionalnodestoclusterA.C
A. routes B. IPspaces C. broadcast domains D.
15.ClickAnswer:subnetsA,DtheExhibit button. After installation of a new ONTAP cluster, you experience a problem. You successfully create a support case on the NetApp Support site. The customer asks you how to view the status of the case. Referring to the exhibit, which two steps would allow the customer to accomplish this task? (Choose two.)
A. Open https://support.netapp.com, using the partner credentials.
14.You installed a new 4-node AFF A400 ONTAP 9.8 cluster. The AFF400 controller data ports were automatically discovered by “automatic port placement”. In this scenario, which two ONTAP network settings were automatically configured? (Choose two.)
PassNetApp NS0-184Exam
Download NS0-184ExamDumpsPDFBestWay B. Open https://support.netapp.com, using the customer credentials. C. Open My Cases, and select the 41747189 case number. D. Open My Cases, and select Create a Case. Answer: Referring16.ClickReference:Explanation:B,Chttps://mysupport.netapp.com/site/info/find-supporttheExhibitbutton.tothenumbersshownintheexhibit,whichportonan AFF A220 controller is used as port e0M in ONTAP? A. 4 B. 3 C. 2 D. Answer:1 E.D.C.B.A.Whatmanually17.Afterc_accs_access-methods-e0m.htmlhttps://documents.uow.edu.au/~blane/netapp/ontap/sysadmin/accessing/concept/c_oReference:Explanation:Acompletinganinstallation,thecustomerwantstoknowhowtheycanopenanewtechnicalcasewithNetAppGlobalSupport.arethreewaystoaccomplishthistask?(Choosethree.)Usethesupportsite.UsetheNetAppFieldPortal.Usethemobileapp.Useatelephone.UseAutoSupport.
D. Load the Cluster-HA-Breakout RCF.
A. Load the Storage RCF.
C. Cable the AFF A250 nodes to the breakout ports on the switch.
A. it allows cabling the shelf to two additional controllers.
NS0-184Exam
an existing 4-node AFF A800 cluster with Cisco Nexus 3232C switches. The cluster switches are currently running the Cluster-HA RCF. In this scenario, which two steps are required to install the AFF A250 system?
C. it allows the controller to nondisruptively reset the SAS expanders.
Answer: C 19.You are using Broadcom BES-53248 switches for a cluster interconnect in a base Inconfiguration.thisscenario, what is the minimum number of ISLs supported between the 20.Youswitches/pdfs/sidebar/BES_53248_Switches.pdfReference:Explanation:Answer:D.C.B.A.switches?1234Bhttps://docs.netapp.com/us-en/ontap-systems-(3)arepreparingtoadda2-nodeAFFA250systemto
B. It allows the controller to use Ethernet instead of SAS to fetch the storage data.
(Choose two.)
BestWayToPassNetApp
D. It enables the automatic shelf ID assignment.
Answer: C,D 21.You are preparing for the installation of a new 2-node switchless AFF A250 ONTAP 9.8 cluster and need to obtain the preinstallation information from the Incustomer.thisscenario, what are three examples of data required from the customer? (Choose three.) A. management IP addresses
Download NS0-184ExamDumpsPDF-
B. Cable the AFF A250 nodes to the next free ports on the switch.
Answer: CDE 18.What is the main function of ACP?
B. Connect the new NS224 shelves to the existing Cisco Nexus 3232C switches.
Download NS0-184ExamDumpsPDF-
BestWayToPassNetApp
C. Deploy a new AFF A400 to the cluster.
Answer: Reference:Explanation:Answer:D.C.B.A.Inwith24.Yourepare-an-aff-a700-aff-a800-or-aff-a400-ha-pair-to-hot-add-a-second-shelfReference:Explanation:A,Chttps://docs.netapp.com/us-en/ontap-systems/ns224/hot-add-shelf.html#parepreparingtoinstallanew2-nodeAFFA250systematacustomersiteanexistingclusterthatusesNetAppCN1610clusterinterconnectswitches.thisscenario,whataretwovalidactionsforthisinstallation?(Choosetwo.)Addthenewnodestotheexistingclusterandswitches.Createanew2-nodeswitchedclusterthatusestheCN1610clusterswitches.Createanew2-nodeswitchlesscluster.Migratetheexistingclustertonewswitchesandaddthenewnodes.B,D
Answer: 23.1.YourAnswer:D.C.B.A.22.Whenguide.html#step-1-prepare-for-installationReference:Explanation:A,B,Dhttps://docs.netapp.com/us-en/ontap-systems/a250/install-detailed-youstartanewServiceEventReport,whatmustbeenteredfirst?thecaseIDnumbertheprojectnumberthenodeserialnumberthesalesordernumberBcustomercurrentlyhasa4-nodeAFFA400clusterthatrunsONTAP 9.8, with two NS224 shelves that are connected to each HA pair. The customer needs to add additional capacity to the cluster.
A. Connect the new NS224 shelves to the existing NS224 shelves and adjust the shelf IDs.
NS0-184Exam
D. Deploy new, dedicated, storage switches for the new NS224 shelves.
Which two actions would enable the customer to accomplish this task? (Choose two.)
B. cluster switch name C. gateway IP address D. BMC IP addresses E. cluster name
Download NS0-184ExamDumpsPDFBestWayToPassNetApp NS0-184Exam B.A.resiliencyWhichconfiguring27.Yousidebar/TR_4894__NetApp_ONTAP_9_9_1_Feature_Overview.pdfReference:Explanation:Answer:D.C.B.A.(ChooseInconfigurationby26.Youclassic/expansion/task_verifying_planned_configuration.htmlReference:Explanation:Answer:existingD.C.volumes.B.controllers.A.two.)Incontrollers.25.YourA_interconnect_errors_and_cannot_perform_takeoveroller_Hardware_Upgrade3A_Adding_AFF_A250_nodes_to_existing_cluster_report_Hhttps://kb.netapp.com/Advice_and_Troubleshooting/Flash_Storage/AFF_Series/Contrcustomerplanstoexpanda2-nodeFAS2750switchedclusterwithtwonewthisscenario,whichtwoprerequisitesshouldyouexamineinadvance?(ChooseVerifythattheharddrivesofthenewcontrollersarecompatiblewiththeoldVerifythattheexistingclusterhasaminimum10GBoffreespaceforrootVerifythattheexistingswitchessupporttheadditionalcontrollers.Verifythattheplatformofthenewcontrollerscanbemixedwiththecluster’scontrollers.B,Dhttps://docs.netapp.com/us-en/ontap-sm-areexpandinganexisting4-nodeONTAP9.8clusterwithaFAS8300HApairaddinganewFAS500fHApair.Beforetheexpansion,youareaskedtosavetheoftheclustertoabackupfile.thisscenario,whichtwoONTAPconfigurationbackupmethodsareavailable?two.)storageVMnodeclusterswitchA,Chttps://docs.netapp.com/us-en/ontap-whatsnew/pdfs/fullsite-havea2-nodeFAS8300ONTAP9.8clusterthatservesSMBshares.Youareinterfacegroupsforhigherperformanceandresiliency.twoNetAppbestpracticesshouldyoufollowtosatisfytheseperformanceandrequirements?(Choosetwo.)UseportsfromdifferentNICs.UseportsfromthesameNICs.
Test NS0-184
