WIDIA Slim Line â„¢
ISSUE 7
Distributed by:
_WID_Slimline_ITC_Issue_7_Bro_Covers.indd 2
12/19/19 8:35 AM
For more than 90 years, WIDIA™ brand products and services have defined excellence in innovation, technology, and customer service. From turning, indexable milling, solid end milling, holemaking, tapping, and tooling systems — WIDIA offers a broad range of solutions, all delivered from a single source. Match the most expansive portfolio of precision-engineered products and engineered solution services available today with a global, specialised network of Authorised Distributor partners, and you have the tools you need — and the power that only comes from WIDIA.
_WID_Slimline_ITC_Issue_7_Bro_Covers.indd 3
12/19/19 8:35 AM
Table of Contents General Purpose Solid Carbide End Mills • Roughing/Finishing.........................................................................2–14 High-Performance Solid Carbide End Mills.........................................................................................................15–34 VariMill................................................................................................................................................................15–24 Roughing............................................................................................................................................................25–28 Finishing..............................................................................................................................................................29–32 Aluminium...........................................................................................................................................................33–34 General Purpose HSS-E End Mills............................................................................................................................. 35 VariDrill....................................................................................................................................................................38–58
3 x D....................................................................................................................................................................40–45
5 x D....................................................................................................................................................................46–51
8 x D....................................................................................................................................................................52–57
Speed and Feed Charts........................................................................................................................................... 58
Informational Icon Guide............................................................................................................................................ 59 Material Overview........................................................................................................................................................ 60
widia.com
WID_Slimline_ITC_Issue_7_Bro_1-13.indd 1
1
1/7/20 10:19 AM
General Purpose Solid Carbide End Mills • Roughing/Finishing Series 4002 4012 • VariMill™ GP • Centre cutting. • Sharp corners. • Standard items listed. Additional styles and coatings made-to-order.
End Mill Tolerances
nn Series 4002 4012 • VariMill GP
TiAlN grade TiAlN TiAlN order # 5873489 5873490 5873491 6092621 6092622 6092623 6092627 6092628 6092631 6092633 6092634 6092636 6092638 6092639 6092640 6092643 6092644 6092645 6092647 6092650 6092648 6092657 6092658 6092659 6092683 6092684 6092685
catalogue # 40020300T009 40020300T019 40120300T025 40020400T012S 40020400T019S 40120400T031S 40020500T014S 40020500T020S 40120500T031S 40020600T016S 40020600T028S 40120600T038S 40020800T020S 40020800T028S 40120800T041S 40021000T022S 40021000T032S 40121000T045S 40021200T025S 40121200T075S 40021200T045S 40021600T032S 40021600T056S 40121600T075S 40022000T038S 40022000T056S 40122000T075S
2
WID_Slimline_ITC_Issue_7_Bro_1-13.indd 2
£ 7.49 10.69 11.08 9.91 10.69 12.43 10.69 11.34 16.69 11.34 16.35 16.35 13.83 19.50 21.81 20.18 25.35 30.11 26.52 40.77 35.36 47.32 49.40 58.50 69.94 84.76 88.92
D1 3,0 3,0 3,0 4,0 4,0 4,0 5,0 5,0 5,0 6,0 6,0 6,0 8,0 8,0 8,0 10,0 10,0 10,0 12,0 12,0 12,0 16,0 16,0 16,0 20,0 20,0 20,0
D 3 3 3 4 4 4 5 5 5 6 6 6 8 8 8 10 10 10 12 12 12 16 16 16 20 20 20
D1
tolerance e8
D
tolerance h6 +/-
≤3
-0,014/-0,028
≤3
0/0,006
> 3–6
-0,020/-0,038
> 3–6
0/0,008
> 6–10
-0,025/-0,047
> 6–10
0/0,009
> 10–18
-0,032/-0,059
> 10–18
0/0,011
> 18–30
-0,040/-0,073
> 18–30
0/0,013
length of cut Ap1 max 9,50 19,00 25,00 12,00 19,00 31,00 14,00 20,00 31,00 16,00 28,00 38,00 20,00 28,00 41,00 22,00 32,00 45,00 25,00 75,00 45,00 32,00 56,00 75,00 38,00 56,00 75,00
length L 38 63 75 50 63 75 50 63 100 50 76 100 63 76 100 72 89 100 76 150 100 89 110 150 104 125 150
widia.com
1/7/20 8:49 AM
General Purpose Solid Carbide End Mills • Roughing/Finishing Application Data • Series 4002 4012 • VariMill™ GP nn Series 4002 4012 • TiAlN • VariMill GP
Side Milling (A) and Slotting (B) A Material Group 0 P
M K
ap
B ae
Ap1 max 0,1 x D
Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%.
TiAlN Cutting Speed — vc m/min
ap
min
0,5 x D
150
–
D1 — Diameter
max
mm
200
fz
0,007 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
1,0
2,0
3,0
4,0
5,0
6,0
8,0
10,0
12,0
14,0
16,0
18,0
20,0
0,007 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
1
Ap1 max 0,1 x D
0,5 x D
150
–
200
fz
2
Ap1 max 0,1 x D
0,5 x D
140
–
190
fz
0,007 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
3
Ap1 max 0,1 x D
0,5 x D
120
–
160
fz
0,006 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
4
Ap1 max 0,1 x D
0,5 x D
90
–
150
fz
0,005 0,010 0,016 0,021 0,027 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088
1
Ap1 max 0,1 x D
0,5 x D
90
–
115
fz
0,006 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
2
Ap1 max 0,1 x D
0,5 x D
60
–
80
fz
0,005 0,009 0,014 0,019 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
1
Ap1 max 0,1 x D
0,5 x D
120
–
150
fz
0,007 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
2
Ap1 max 0,1 x D
0,5 x D
110
–
140
fz
0,006 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
widia.com
WID_Slimline_ITC_Issue_7_Bro_1-13.indd 3
3
1/7/20 8:49 AM
General Purpose Solid Carbide End Mills • Roughing/Finishing Series 4001 4011 4021 • VariMill™ GP • Centre cutting. • Standard items listed. Additional styles and coatings made-to-order.
End Mill Tolerances
nn Series 4001 4011 4021 • VariMill GP
grade TiAlN TiAlN
D1
tolerance e8
D
tolerance h6 +/-
≤3
-0,014/-0,028
≤3
0/0,006
> 3–6
-0,020/-0,038
> 3–6
0/0,008
> 6–10
-0,025/-0,047
> 6–10
0/0,009
> 10–18
-0,032/-0,059
> 10–18
0/0,011
> 18–30
-0,040/-0,073
> 18–30
0/0,013
length of cut Ap1 max
length L
order #
catalogue #
£
D1
D
5880391
40010300T009
10.89
3,0
3
9,50
38
5880393
40010400T012
12.06
4,0
4
12,00
50
5880395
40110400T019
13.62
4,0
4
19,00
63
5880396
40210400T031
16.61
4,0
4
31,00
75
6209446
40010500T014
12.06
5,0
5
14,00
50
6209447
40110500T020
16.69
5,0
5
20,00
63
5880398
40010600T020
13.55
6,0
6
20,00
63
5880399
40110600T028
17.21
6,0
6
28,00
76
5880400
40210600T038
18.17
6,0
6
38,00
100 63
5880401
40010800T020
16.46
8,0
8
20,00
5880402
40110800T028
20.20
8,0
8
28,00
76
5880403
40210800T040
24.23
8,0
8
40,00
100 76
5880404
40011000T022
23.63
10,0
10
22,00
5880405
40111000T032
32.40
10,0
10
32,00
89
5880406
40211000T045
33.44
10,0
10
45,00
100
5880407
40011200T025
34.74
12,0
12
25,00
75
5880408
40111200T045
39.26
12,0
12
45,00
100
5880409
40211200T075
46.33
12,0
12
75,00
150
5880411
40011600T032
49.40
16,0
16
32,00
89
6209448
40111600T056
58.24
16,0
16
56,00
110
6209449
40211600T075
65.00
16,0
16
75,00
150
4
WID_Slimline_ITC_Issue_7_Bro_1-13.indd 4
widia.com
1/7/20 8:49 AM
General Purpose Solid Carbide End Mills • Roughing/Finishing Application Data • Series 4001 4011 4021 • VariMill™ GP nn Series 4001 4011 4021 • TiAlN • VariMill GP
Material Group
P
M K
Side Milling (A)
TiAlN
A
Cutting Speed — vc m/min
ap
ae
min
Recommended feed per tooth (fz = mm/th) for side milling (A). D1 — Diameter
max
mm
2,0
3,0
4,0
5,0
6,0
8,0
10,0
12,0
14,0
16,0
18,0
20,0
0
Ap1 max 0,1 x D
150
–
200
fz
0,014
0,021
0,028
0,036
0,044
0,060
0,072
0,083
0,092
0,101
0,108
0,114
1
Ap1 max 0,1 x D
150
–
200
fz
0,014
0,021
0,028
0,036
0,044
0,060
0,072
0,083
0,092
0,101
0,108
0,114
2
Ap1 max 0,1 x D
140
–
190
fz
0,014
0,021
0,028
0,036
0,044
0,060
0,072
0,083
0,092
0,101
0,108
0,114
3
Ap1 max 0,1 x D
120
–
160
fz
0,011
0,017
0,023
0,030
0,036
0,050
0,061
0,070
0,079
0,087
0,095
0,101
4
Ap1 max 0,1 x D
90
–
150
fz
0,010
0,016
0,021
0,027
0,033
0,045
0,054
0,062
0,070
0,077
0,083
0,088
1
Ap1 max 0,1 x D
90
–
115
fz
0,011
0,017
0,023
0,030
0,036
0,050
0,061
0,070
0,079
0,087
0,095
0,101
2
Ap1 max 0,1 x D
60
–
80
fz
0,009
0,014
0,019
0,024
0,029
0,040
0,048
0,056
0,063
0,070
0,076
0,081
1
Ap1 max 0,1 x D
120
–
150
fz
0,014
0,021
0,028
0,036
0,044
0,060
0,072
0,083
0,092
0,101
0,108
0,114
2
Ap1 max 0,1 x D
110
–
140
fz
0,011
0,017
0,023
0,030
0,036
0,050
0,061
0,070
0,079
0,087
0,095
0,101
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
widia.com
WID_Slimline_ITC_Issue_7_Bro_1-13.indd 5
5
1/7/20 8:49 AM
General Purpose Solid Carbide End Mills • Roughing/Finishing Series 4003 4013 • VariMill™ GP • Centre cutting. • Sharp corners.
End Mill Tolerances D1
tolerance e8
D
tolerance h6 +/-
≤3
-0,014/-0,028
≤3
0/0,006
> 3–6
-0,020/-0,038
> 3–6
0/0,008
> 6–10
-0,025/-0,047
> 6–10
0/0,009
> 10–18
-0,032/-0,059
> 10–18
0/0,011
> 18–30
-0,040/-0,073
> 18–30
0/0,013
nn Series 4003 4013 • VariMill GP
grade TiAlN TiAlN catalogue #
£
D1
D
length of cut Ap1 max
length L
6144060
40030300T009S
7.49
3,0
3
9,50
38
6145199
40130300T019S
10.69
3,0
6
19,00
63
6144551
40030400T012S
9.91
4,0
4
12,00
50
6145200
40130400T019S
10.69
4,0
4
19,00
63
6144552
40030500T014S
10.69
5,0
6
14,00
50
6145231
40130500T020S
11.34
5,0
6
20,00
63
6144553
40030600T016S
11.34
6,0
6
16,00
50
6145232
40130600T028S
16.35
6,0
6
28,00
75
6144554
40030800T019S
13.83
8,0
8
19,00
63
6145233
40130800T028S
19.50
8,0
8
28,00
75
6144555
40031000T022S
24.93
10,0
10
22,00
76
6145234
40131000T032S
25.35
10,0
10
32,00
89
6144556
40031200T025S
26.52
12,0
12
25,00
75
6145235
40131200T045S
35.36
12,0
12
45,00
100
6144557
40031600T032S
47.32
16,0
16
32,00
89
6145238
40131600T056S
49.40
16,0
16
56,00
110
order #
6
WID_Slimline_ITC_Issue_7_Bro_1-13.indd 6
widia.com
1/7/20 8:49 AM
General Purpose Solid Carbide End Mills • Roughing/Finishing Application Data • Series 4003 4013 • VariMill™ GP nn Series 4003 4013 • VariMill GP TiAlN
Material Group
P
M K
Side Milling (A)
TiAlN
Recommended feed per tooth (fz = mm/th) for side milling (A).
A
Cutting Speed — vc m/min
D1 — Diameter
ap
ae
min
max
mm
0
Ap1 max
0,1 x D
150
–
200
fz
0,007 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
1,0
2,0
3,0
4,0
5,0
6,0
8,0
10,0
12,0
14,0
16,0
18,0
20,0
1
Ap1 max
0,1 x D
150
–
200
fz
0,007 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
2
Ap1 max
0,1 x D
140
–
190
fz
0,007 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
3
Ap1 max
0,1 x D
120
–
160
fz
0,006 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
4
Ap1 max
0,1 x D
90
–
150
fz
0,005 0,010 0,016 0,021 0,027 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088
1
Ap1 max
0,1 x D
90
–
115
fz
0,006 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
2
Ap1 max
0,1 x D
60
–
80
fz
0,005 0,009 0,014 0,019 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
1
Ap1 max
0,1 x D
120
–
150
fz
0,007 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
2
Ap1 max
0,1 x D
110
–
140
fz
0,006 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on diameters > 12mm.
widia.com
WID_Slimline_ITC_Issue_7_Bro_1-13.indd 7
7
1/7/20 8:49 AM
General Purpose Solid Carbide End Mills • Roughing/Finishing Series 4004 4014 4024 • VariMill™ GP • Centre cutting. • Sharp corners. • Standard items listed. Additional styles and coatings made-to-order.
End Mill Tolerances
nn Series 4004 4014 4024 • VariMill GP
grade TiAlN TiAlN order # 5826020 5826021 5826022 6085576 6085577 6085578 6085580 6085581 6085582 6085583 6085584 6085585 6085586 6200965 6085589 6085590 6085592 6085593 6085594 6085595 6085596 6085597 6085601 6085602 6085603 6085607 6085608 6085609
catalogue # 40040300T009 40140300T019 40240300T025 40040400T011S 40140400T019S 40240400T031S 40040500T013S 40040500T020S 40140500T030S 40240500T031S 40040600T016S 40140600T028S 40240600T038S 40040800T021S 40140800T028S 40240800T041S 40041000T022S 40141000T032S 40241000T045S 40041200T025S 40141200T045S 40241200T075S 40041600T032S 40141600T056S 40241600T075S 40042000T038S 40142000T056S 40242000T075S
8
WID_Slimline_ITC_Issue_7_Bro_1-13.indd 8
£ 7.49 10.69 11.08 9.91 10.69 12.43 10.69 11.34 14.72 16.69 11.34 16.35 16.35 13.83 19.50 21.81 20.18 25.35 30.11 30.26 35.36 40.77 47.32 49.40 58.50 69.94 84.76 88.92
D1 3,0 3,0 3,0 4,0 4,0 4,0 5,0 5,0 5,0 5,0 6,0 6,0 6,0 8,0 8,0 8,0 10,0 10,0 10,0 12,0 12,0 12,0 16,0 16,0 16,0 20,0 20,0 20,0
D 3 3 3 4 4 4 5 5 5 5 6 6 6 8 8 8 10 10 10 12 12 12 16 16 16 20 20 20
D
tolerance h6 +/-
-0,014/-0,028
≤3
0/0,006
-0,020/-0,038
> 3–6
0/0,008
D1
tolerance e8
≤3 > 3–6 > 6–10
-0,025/-0,047
> 6–10
0/0,009
> 10–18
-0,032/-0,059
> 10–18
0/0,011
> 18–30
-0,040/-0,073
> 18–30
0/0,013
length of cut Ap1 max 9,50 19,00 25,00 11,00 19,00 31,00 13,00 20,00 30,00 31,00 16,00 28,00 38,00 20,00 28,00 41,00 22,00 32,00 45,00 25,00 45,00 75,00 32,00 56,00 75,00 38,00 56,00 75,00
length L 38 63 75 50 63 75 50 63 75 100 50 75 100 63 75 100 72 89 100 89 100 150 92 110 150 104 125 150
widia.com
1/7/20 8:49 AM
General Purpose Solid Carbide End Mills • Roughing/Finishing Series 4004 4014 4024 Series • VariMill™ GP Radius
End Mill Tolerances D1 ≤3 > 3–6 > 6–10 > 10–18 > 18–30
tolerance e8 -0,014/-0,028 -0,020/-0,038 -0,025/-0,047 -0,032/-0,059 -0,040/-0,073
D ≤3 > 3–6 > 6–10 > 10–18 > 18–30
tolerance h6 +/0/0,006 0/0,008 0/0,009 0/0,011 0/0,013
nn Series 4004 4014 4024 Series • VariMill GP Radius
TiAlN grade TiAlN TiAlN order # catalogue # 6337590 40040200T006R050 6337731 40040300T009R050 6337892 40140300T019R050 6338335 40240300T025R050 6337732 40040300T009R100 6337733 40040400T011R050 6337893 40140400T019R050 6338336 40240400T031R050 6337734 40040400T011R100 6337894 40140400T019R100 6338337 40240400T031R100 6337735 40040500T013R050 6337895 40140500T030R050 6337896 40140500T030R100 6337736 40040600T016R050 6337897 40140600T028R050 6338338 40240600T038R050 6337737 40040600T016R100 6337898 40140600T028R100 6338339 40240600T038R100 6337738 40040800T020R050 6337899 40140800T028R050 6338340 40240800T041R050 6337739 40040800T020R100 6337900 40140800T028R100 6338341 40240800T041R100 6337740 40041000T022R050 6337911 40141000T032R050
£ 8.09 8.09 11.52 11.96 8.09 10.71 11.52 13.44 10.71 11.52 13.44 11.52 15.89 15.89 12.25 17.68 17.68 12.25 17.68 18.82 14.90 21.06 23.56 14.90 21.06 23.56 21.79 27.40
D1 2,0 3,0 3,0 3,0 3,0 4,0 4,0 4,0 4,0 4,0 4,0 5,0 5,0 5,0 6,0 6,0 6,0 6,0 6,0 6,0 8,0 8,0 8,0 8,0 8,0 8,0 10,0 10,0
D 3 3 3 3 3 4 4 4 4 4 4 5 5 5 6 6 6 6 6 6 8 8 8 8 8 8 10 10
length of cut Ap1 max 6,30 9,50 19,00 25,00 9,50 11,00 19,00 31,00 11,00 19,00 31,00 13,00 30,00 30,00 16,00 28,00 38,00 16,00 28,00 38,00 20,00 28,00 41,00 20,00 28,00 41,00 22,00 32,00
length L 38 38 63 75 38 50 63 75 50 63 75 50 75 75 50 75 100 50 75 100 50 75 100 50 75 100 72 89
Re 0,50 0,50 0,50 0,50 1,00 0,50 0,50 0,50 1,00 1,00 1,00 0,50 0,50 1,00 0,50 0,50 0,50 1,00 1,00 1,00 0,50 0,50 0,50 1,00 1,00 1,00 0,50 0,50 (continued)
widia.com
WID_Slimline_ITC_Issue_7_Bro_1-13.indd 9
9
1/7/20 8:49 AM
General Purpose Solid Carbide End Mills • Roughing/Finishing Series 4004 4014 4024 Series • VariMill™ GP Radius (Series 4004 4014 4024 Series • VariMill GP Radius — continued)
End Mill Tolerances D1 ≤3 > 3–6 > 6–10 > 10–18 > 18–30
tolerance e8 -0,014/-0,028 -0,020/-0,038 -0,025/-0,047 -0,032/-0,059 -0,040/-0,073
D ≤3 > 3–6 > 6–10 > 10–18 > 18–30
tolerance h6 +/0/0,006 0/0,008 0/0,009 0/0,011 0/0,013
nn Series 4004 4014 4024 Series • VariMill GP Radius
TiAlN grade TiAlN TiAlN order # catalogue # 6338342 40241000T045R050 6337741 40041000T022R100 6337912 40141000T032R100 6338343 40241000T045R100 6337742 40041200T025R050 6337913 40141200T045R050 6338344 40241200T075R050 6337743 40041200T025R100 6337914 40141200T045R100 6338345 40241200T075R100 6337744 40041600T032R050 6337915 40141600T056R050 6338346 40241600T075R050 6337745 40041600T032R100 6337916 40141600T056R100 6338347 40241600T075R100 6338349 40242000T075R050
£ 32.45 21.79 27.40 32.45 31.77 37.13 42.85 31.77 37.13 42.85 49.66 51.74 61.62 49.66 51.74 61.62 93.08
D1 10,0 10,0 10,0 10,0 12,0 12,0 12,0 12,0 12,0 12,0 16,0 16,0 16,0 16,0 16,0 16,0 20,0
D 10 10 10 10 12 12 12 12 12 12 16 16 16 16 16 16 20
length of cut Ap1 max 45,00 22,00 32,00 45,00 25,00 45,00 75,00 25,00 45,00 75,00 32,00 56,00 75,00 32,00 56,00 75,00 75,00
length L 100 72 89 100 89 100 150 89 100 150 92 110 150 92 110 150 150
Re 0,50 1,00 1,00 1,00 0,50 0,50 0,50 1,00 1,00 1,00 0,50 0,50 0,50 1,00 1,00 1,00 0,50
NOTE: Refer to NOVO for the complete GP end mill offering. ™
10
WID_Slimline_ITC_Issue_7_Bro_1-13.indd 10
widia.com
1/7/20 8:49 AM
General Purpose Solid Carbide End Mills • Roughing/Finishing Application Data • Series 4004 4014 4024 • VariMill GP ™
nn Series 4004 4014 4024 • TiAlN • VariMill GP
Side Milling (A) and Slotting (B) A Material Group 0 P
M K
ap
B ae
Ap1 max 0,1 x D
Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%.
TiAlN Cutting Speed — vc m/min
ap
min
0,5 x D
150
–
D1 — Diameter
max
mm
200
fz
1,0
2,0
3,0
4,0
5,0
6,0
8,0
10,0
12,0
14,0
16,0
18,0
20,0
0,007 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
1
Ap1 max 0,1 x D
0,5 x D
150
–
200
fz
0,007 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
2
Ap1 max 0,1 x D
0,5 x D
140
–
190
fz
0,007 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
3
Ap1 max 0,1 x D
0,5 x D
120
–
160
fz
0,006 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
4
Ap1 max 0,1 x D
0,5 x D
90
–
150
fz
0,005 0,010 0,016 0,021 0,027 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088
1
Ap1 max 0,1 x D
0,5 x D
90
–
115
fz
0,006 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
2
Ap1 max 0,1 x D
0,5 x D
60
–
80
fz
0,005 0,009 0,014 0,019 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
1
Ap1 max 0,1 x D
0,5 x D
120
–
150
fz
0,007 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
2
Ap1 max 0,1 x D
0,5 x D
110
–
140
fz
0,006 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
widia.com
WID_Slimline_ITC_Issue_7_Bro_1-13.indd 11
11
1/7/20 8:49 AM
General Purpose Solid Carbide End Mills • Roughing/Finishing Series 4000 4010 • VariMill™ GP • Centre cutting. • Standard items listed. Additional styles and coatings made-to-order.
End Mill Tolerances D1
tolerance e8
D
tolerance h6 +/-
≤3
-0,014/-0,028
≤3
0/0,006
> 3–6
-0,020/-0,038
> 3–6
0/0,008
> 6–10
-0,025/-0,047
> 6–10
0/0,009
> 10–18
-0,032/-0,059
> 10–18
0/0,011
> 18–30
-0,040/-0,073
> 18–30
0/0,013
nn Series 4000 4010 • VariMill GP
TiAlN grade TiAlN TiAlN order # 6231685 5825556 5825557 5825558 5825559 5825560 5825573 5825574 5825575 5825576 5825577 5825578 5825579 5825580 5825581 5825585 5825586
catalogue # 40000300T009 40000300T020 40000400T014 40100400T025 40000500T016 40100500T030 40000600T016 40100600T019 40100600T030 40000800T019 40100800T040 40001000T022 40101000T040 40001200T025 40101200T045 40001600T032 40101600T065
12
WID_Slimline_ITC_Issue_7_Bro_1-13.indd 12
£ 10.89 13.23 12.06 16.61 12.06 16.61 12.06 13.55 17.21 16.46 24.23 21.81 33.44 34.74 45.29 49.40 65.00
D1 3,0 3,0 4,0 4,0 5,0 5,0 6,0 6,0 6,0 8,0 8,0 10,0 10,0 12,0 12,0 16,0 16,0
D 3 3 4 4 5 5 6 6 6 8 8 10 10 12 12 16 16
length of cut Ap1 max 9,50 20,00 14,00 25,00 16,00 30,00 16,00 19,00 30,00 19,00 40,00 22,00 40,00 25,00 45,00 32,00 65,00
length L 38 75 50 75 50 75 50 63 75 63 100 72 100 75 150 89 150
widia.com
1/7/20 8:49 AM
General Purpose Solid Carbide End Mills • Roughing/Finishing Application Data • Series 4000 4010 • VariMill GP ™
nn Series 4000 4010 • TiAlN • VariMill GP
Side Milling (A) and Slotting (B) A Material Group
P
M K
ap
B ae
Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%.
TiAlN Cutting Speed — vc m/min
ap
min
D1 — Diameter
max
mm
3,0
4,0
5,0
6,0
8,0
10,0
12,0
14,0
16,0
18,0
20,0
0
Ap1 max 0,1 x D
0,5 x D
150
–
200
fz
0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
1
Ap1 max 0,1 x D
0,5 x D
150
–
200
fz
0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
2
Ap1 max 0,1 x D
0,5 x D
140
–
190
fz
0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
3
Ap1 max 0,1 x D
0,5 x D
120
–
160
fz
0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
4
Ap1 max 0,1 x D
0,5 x D
90
–
150
fz
0,016 0,021 0,027 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088
1
Ap1 max 0,1 x D
0,5 x D
90
–
115
fz
0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
2
Ap1 max 0,1 x D
0,5 x D
60
–
80
fz
0,014 0,019 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
1
Ap1 max 0,1 x D
0,5 x D
120
–
150
fz
0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
2
Ap1 max 0,1 x D
0,5 x D
110
–
140
fz
0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
widia.com
WID_Slimline_ITC_Issue_7_Bro_1-13.indd 13
13
1/7/20 8:49 AM
General Purpose Solid Carbide End Mills • Roughing/Finishing Series 423004 • NINA™ • Centre cutting. • HPC. • Standard items listed. Additional styles and coatings made-to-order. Detail X
End Mill Tolerances D1
nn Series 423004 • NINA
K30F-DCHP grade K30F-DCHP AlTiN
tolerance h10 +/-
D
tolerance h6 +/-
≤3
0/0,04
≤3
0/0,006
> 3–6
0/0,048
> 3–6
0/0,008
> 6–10
0/0,058
> 6–10
0/0,009
> 10–18
0/0,070
> 10–18
0/0,011
> 18–30
0/0,084
> 18–30
0/0,013
K30F-DCHP
catalogue #
£
D1
D
length of cut Ap1 max
length L
BCH
3657761
423004-000040
8.59
4,0
6
7,00
38
0,40
3657762
423004-000060
9.71
6,0
6
8,00
38
0,40
3657763
423004-000080
12.28
8,0
8
11,00
43
0,40
3657764
423004-000100
17.65
10,0
10
13,00
50
0,50
3657765
423004-000120
23.72
12,0
12
15,00
55
0,50
order #
nn Series 423004 • NINA
K30F-DCHP
Side Milling (A) and Slotting (B) A Material Group
P
M
K
Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%.
AlTiN B
Cutting Speed — vc m/min
D1 — Diameter
ap
ae
ap
min
–
max
mm
4,0
5,0
6,0
8,0
10,0
12,0
0
1xD
0,5 x D
1xD
150
–
200
fz
0,028
0,036
0,044
0,060
0,072
0,083
1
1xD
0,5 x D
1xD
150
–
200
fz
0,028
0,036
0,044
0,060
0,072
0,083
2
1xD
0,5 x D
1xD
140
–
190
fz
0,028
0,036
0,044
0,060
0,072
0,083
3
1xD
0,5 x D
1xD
120
–
160
fz
0,023
0,030
0,036
0,050
0,061
0,070
4
1xD
0,5 x D
1xD
90
–
150
fz
0,021
0,027
0,033
0,045
0,054
0,062
1
1xD
0,5 x D
1xD
90
–
115
fz
0,023
0,030
0,036
0,050
0,061
0,070
2
1xD
0,5 x D
1xD
60
–
80
fz
0,019
0,024
0,029
0,040
0,048
0,056
1
1xD
0,5 x D
1xD
120
–
150
fz
0,028
0,036
0,044
0,060
0,072
0,083
2
1xD
0,5 x D
1xD
110
–
140
fz
0,023
0,030
0,036
0,050
0,061
0,070
3
1xD
0,5 x D
1xD
110
–
130
fz
0,019
0,024
0,029
0,040
0,048
0,056
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
14
WID_Slimline_ITC_Issue_7_Bro_14-26.indd 14
widia.com
12/19/19 8:36 AM
High-Performance Solid Carbide End Mills • VariMill
™
Series 4777 • VariMill I™ • Victory Grades ™
• Unequal flute spacing. • Centre cutting. • Single tool for both roughing and finishing operations requiring fewer setups. • Standard items listed. Additional styles and coatings made-to-order.
End Mill Tolerances D1
tolerance e8
D
tolerance h6 +/-
≤3
-0,014/-0,028
≤3
0/-0,006
> 3-6
-0,020/-0,038
> 3–6
0/-0,008
> 6–10
-0,025/-0,047
> 6–10
0/-0,009
> 10–18
-0,032/-0,059
> 10–18
0/-0,011
> 18–30
-0,040/-0,073
> 18–30
0/-0,013
nn Series 4777 • VariMill • Victory Grades
grade WP15PE AlTiN order #
catalogue #
£
D1
D
length of cut Ap1 max
length L
Re
BCH
5576751
477704002T
18.12
4,0
6
12,00
55
—
0,40
5576753
477704001T
19.38
4,0
6
12,00
55
0,20
—
5576754
4777040Z2T
20.86
4,0
6
12,00
55
—
—
5576755
477705002T
18.79
5,0
6
13,00
57
—
0,40
5576757
477705012T
19.38
5,0
6
13,00
57
0,20
—
5576758
4777050Z2T
20.86
5,0
6
13,00
57
—
—
5576759
477706002T
20.37
6,0
6
13,00
57
—
0,40
5576761
477706012T
19.38
6,0
6
13,00
57
0,20
—
5576762
4777060Z2T
20.86
6,0
6
13,00
57
—
—
5576767
477708003T
28.83
8,0
8
16,00
63
—
0,40
5576769
477708013T
29.43
8,0
8
16,00
63
0,20
—
5576770
4777080Z3T
27.96
8,0
8
16,00
63
—
—
5576775
477710004T
38.48
10,0
10
22,00
72
—
0,50
5576777
477710024T
42.29
10,0
10
22,00
72
0,30
—
5576778
4777100Z4T
40.33
10,0
10
22,00
72
—
—
5576790
477712005T
51.97
12,0
12
26,00
83
—
0,50
5576792
477712025T
56.42
12,0
12
26,00
83
0,30
—
5576793
4777120Z5T
55.97
12,0
12
26,00
83
—
—
5576796
477716006T
84.43
16,0
16
32,00
92
—
0,50
5576798
477716026T
92.00
16,0
16
32,00
92
0,30
—
5576799
4777160Z6T
89.22
16,0
16
32,00
92
—
—
5576812
477720007T
122.97
20,0
20
38,00
104
—
0,50
5576814
47772002T
136.26
20,0
20
38,00
104
0,30
—
widia.com
WID_Slimline_ITC_Issue_7_Bro_14-26.indd 15
15
12/19/19 8:36 AM
High-Performance Solid Carbide End Mills • VariMill
™
Application Data • Series 4777 • VariMill I™ • Victory Grades ™
nn Series 4777 • VariMill • Victory Grades
Side Milling (A) and Slotting (B) A Material Group 0
P
M
K
S
H
ap
B ae
1,5 x D 0,5 x D
Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%.
WP15PE Cutting Speed — vc m/min
ap
min
1xD
150
–
D1 — Diameter
max
mm
4,0
5,0
6,0
8,0
10,0
12,0
14,0
16,0
18,0
20,0
25,0
200
fz
0,028
0,036
0,044
0,060
0,072
0,083
0,092
0,101
0,108
0,114
0,124
1
1,5 x D 0,5 x D
1xD
150
–
200
fz
0,028
0,036
0,044
0,060
0,072
0,083
0,092
0,101
0,108
0,114
0,124
2
1,5 x D 0,5 x D
1xD
140
–
190
fz
0,028
0,036
0,044
0,060
0,072
0,083
0,092
0,101
0,108
0,114
0,124
3
1,5 x D 0,5 x D
1xD
120
–
160
fz
0,023
0,030
0,036
0,050
0,061
0,070
0,079
0,087
0,095
0,101
0,114
4
1,5 x D 0,5 x D
0,75 x D
90
–
150
fz
0,021
0,027
0,033
0,045
0,054
0,062
0,070
0,077
0,083
0,088
0,098
5
1,5 x D 0,5 x D
1xD
60
–
100
fz
0,019
0,024
0,029
0,040
0,048
0,056
0,063
0,070
0,076
0,081
0,091
6
1,5 x D 0,5 x D
0,75 x D
50
–
75
fz
0,016
0,020
0,025
0,034
0,040
0,047
0,052
0,057
0,061
0,065
0,071
1
1,5 x D 0,5 x D
1xD
90
–
115
fz
0,023
0,030
0,036
0,050
0,061
0,070
0,079
0,087
0,095
0,101
0,114
2
1,5 x D 0,5 x D
1xD
60
–
80
fz
0,019
0,024
0,029
0,040
0,048
0,056
0,063
0,070
0,076
0,081
0,091
3
1,5 x D 0,5 x D
1xD
60
–
70
fz
0,016
0,020
0,025
0,034
0,040
0,047
0,052
0,057
0,061
0,065
0,071
1
1,5 x D 0,5 x D
1xD
120
–
150
fz
0,028
0,036
0,044
0,060
0,072
0,083
0,092
0,101
0,108
0,114
0,124
2
1,5 x D 0,5 x D
1xD
110
–
140
fz
0,023
0,030
0,036
0,050
0,061
0,070
0,079
0,087
0,095
0,101
0,114
3
1,5 x D 0,5 x D
1xD
110
–
130
fz
0,019
0,024
0,029
0,040
0,048
0,056
0,063
0,070
0,076
0,081
0,091
1
1,5 x D 0,3 x D
0,3 x D
50
–
90
fz
0,023
0,030
0,036
0,050
0,061
0,070
0,079
0,087
0,095
0,101
0,114
2
1,5 x D 0,3 x D
0,3 x D
25
–
40
fz
0,013
0,016
0,019
0,026
0,032
0,037
0,042
0,046
0,050
0,054
0,061
3
1,5 x D 0,5 x D
1xD
60
–
80
fz
0,019
0,024
0,029
0,040
0,048
0,056
0,063
0,070
0,076
0,081
0,091
4
1,5 x D 0,5 x D
1xD
50
–
60
fz
0,016
0,021
0,026
0,037
0,045
0,052
0,058
0,064
0,069
0,074
0,084
1
1,5 x D 0,5 x D
0,75 x D
80
–
140
fz
0,021
0,027
0,033
0,045
0,054
0,062
0,070
0,077
0,083
0,088
0,098
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
16
WID_Slimline_ITC_Issue_7_Bro_14-26.indd 16
widia.com
12/19/19 8:36 AM
High-Performance Solid Carbide End Mills • VariMill
™
Series 47N0 • VariMill I™ • Ball Nose • Victory Grades ™
• Unequal flute spacing. • Centre cutting. • Single tool for both roughing and finishing operations requiring fewer setups. • Standard items listed. Additional styles and coatings made-to-order.
End Mill Tolerances D1
tolerance e8
D
tolerance h6 +/-
≤3
-0,014/-0,028
≤3
0/-0,006
> 3–6
-0,020/-0,038
> 3–6
0/-0,008
> 6–10
-0,025/-0,047
> 6–10
0/-0,009
> 10–18
-0,032/-0,059
> 10–18
0/-0,011
> 18–30
-0,040/-0,073
> 18–30
0/-0,013
L3
length L
nn Series 47N0 • VariMill • Ball Nose • Victory Grades
WP15PE grade WP15PE AlTiN order #
catalogue #
£
D1
D
D3
length of cut Ap1 max
5576818
47N005002T
21.51
5,0
6
4,70
9,00
15,00
57
5576819
47N006002T
22.55
6,0
6
5,64
10,00
15,00
57
5576820
47N008003T
34.05
8,0
8
7,52
12,00
20,00
63
5576821
47N010004T
46.64
10,0
10
9,40
14,00
25,00
72
5576822
47N012005T
59.49
12,0
12
11,28
16,00
30,00
83
5576823
47N016006T
98.26
16,0
16
15,04
22,00
38,00
92
5576824
47N020007T
168.48
20,0
20
18,80
26,00
50,00
104
widia.com
WID_Slimline_ITC_Issue_7_Bro_14-26.indd 17
17
12/19/19 8:36 AM
High-Performance Solid Carbide End Mills • VariMill
™
Application Data • Series 47N0 • With Neck • VariMill I™ • Victory™ Grades nn Series 47N0 • With Neck • VariMill • Victory Grades
Side Milling (A) and Slotting (B) A Material Group
P
M
K
S
H
ap
ae
Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%.
WP15PE B
Cutting Speed — vc m/min
ap
min
max
D1 — Diameter mm
5,0
6,0
8,0
10,0
12,0
14,0
16,0
18,0
20,0
0
1,25 x D
0,5 x D
1xD
150
–
200
fz
0,036
0,044
0,060
0,072
0,083
0,092
0,101
0,108
0,114
1
1,25 x D
0,5 x D
1xD
150
–
200
fz
0,036
0,044
0,060
0,072
0,083
0,092
0,101
0,108
0,114
2
1,25 x D
0,5 x D
1xD
140
–
190
fz
0,036
0,044
0,060
0,072
0,083
0,092
0,101
0,108
0,114
3
1,25 x D
0,5 x D
1xD
120
–
160
fz
0,030
0,036
0,050
0,061
0,070
0,079
0,087
0,095
0,101
4
1,25 x D
0,5 x D
0,75 x D
90
–
150
fz
0,027
0,033
0,045
0,054
0,062
0,070
0,077
0,083
0,088
5
1,25 x D
0,5 x D
1xD
60
–
100
fz
0,024
0,029
0,040
0,048
0,056
0,063
0,070
0,076
0,081
6
1,25 x D
0,5 x D
0,75 x D
50
–
75
fz
0,020
0,025
0,034
0,040
0,047
0,052
0,057
0,061
0,065
1
1,25 x D
0,5 x D
1xD
90
–
115
fz
0,030
0,036
0,050
0,061
0,070
0,079
0,087
0,095
0,101
2
1,25 x D
0,5 x D
1xD
60
–
80
fz
0,024
0,029
0,040
0,048
0,056
0,063
0,070
0,076
0,081
3
1,25 x D
0,5 x D
1xD
60
–
70
fz
0,020
0,025
0,034
0,040
0,047
0,052
0,057
0,061
0,065
1
1,25 x D
0,5 x D
1xD
120
–
150
fz
0,036
0,044
0,060
0,072
0,083
0,092
0,101
0,108
0,114
2
1,25 x D
0,5 x D
1xD
110
–
140
fz
0,030
0,036
0,050
0,061
0,070
0,079
0,087
0,095
0,101
3
1,25 x D
0,5 x D
1xD
110
–
130
fz
0,024
0,029
0,040
0,048
0,056
0,063
0,070
0,076
0,081
1
1xD
0,3 x D
0,3 x D
50
–
90
fz
0,030
0,036
0,050
0,061
0,070
0,079
0,087
0,095
0,101
2
1xD
0,3 x D
0,3 x D
25
–
40
fz
0,016
0,019
0,026
0,032
0,037
0,042
0,046
0,050
0,054
3
1,25 x D
0,5 x D
1xD
60
–
80
fz
0,024
0,029
0,040
0,048
0,056
0,063
0,070
0,076
0,081
4
1,25 x D
0,5 x D
1xD
50
–
60
fz
0,021
0,026
0,037
0,045
0,052
0,058
0,064
0,069
0,074
1
1,25 x D
0,5 x D
0,75 x D
80
–
140
fz
0,027
0,033
0,045
0,054
0,062
0,070
0,077
0,083
0,088
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
18
WID_Slimline_ITC_Issue_7_Bro_14-26.indd 18
widia.com
12/19/19 8:36 AM
High-Performance Solid Carbide End Mills • VariMill
™
Series 577C • VariMill II™ • With Centre Cut • Victory™ Grades • Unequal flute spacing. • Centre cutting. • Single tool for both roughing and finishing operations requiring fewer setups. • Slotting up to 1 x D. • Standard items listed. Additional styles and coatings made-to-order.
End Mill Tolerances D1
tolerance e8
D
tolerance h6 +/-
≤3
-0,014/-0,028
≤3
0/-0,006
> 3-6
-0,020/-0,038
> 3–6
0/-0,008
> 6–10
-0,025/-0,047
> 6–10
0/-0,009
> 10–18
-0,032/-0,059
> 10–18
0/-0,011
> 18–30
-0,040/-0,073
> 18–30
0/-0,013
nn Series 577C • VariMill II • With Centre Cut • Victory Grades
grade WP15PE WP15PE AlTiN
WP15PE
order #
catalogue #
£
D1
D
length of cut Ap1 max
length L
Re
5578867
577C04002W
25.20
4,0
6
11,00
55
0,25
5578991
577C05002W
25.44
5,0
6
13,00
57
0,25
5578993
577C06002W
27.46
6,0
6
13,00
57
0,40
5578998
577C08003W
36.70
8,0
8
19,00
63
0,50
5579024
577C10004W
46.65
10,0
10
22,00
72
0,50
5579027
577C12005W
61.84
12,0
12
26,00
83
0,75
5579043
577C16006W
103.45
16,0
16
32,00
92
0,75
5579048
577C20007W
150.58
20,0
20
38,00
104
0,75
5579061
577C25008W
229.31
25,0
25
45,00
121
0,75
widia.com
WID_Slimline_ITC_Issue_7_Bro_14-26.indd 19
19
12/19/19 8:36 AM
High-Performance Solid Carbide End Mills • VariMill
™
Application Data • Series 577C • VariMill II™ • Victory™ Grades nn Series 577C • VariMill II • Victory Grades
Side Milling (A) and Slotting (B) A Material Group 0
P
M
K
S
H
Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%.
WP15PE B
Cutting Speed — vc m/min
ap
ae
ap
min
1,5 x D
0,5 x D
1xD
150
–
D1 — Diameter
max
mm
6,0
8,0
10,0
12,0
14,0
16,0
18,0
20,0
25,0
200
fz
0,044
0,060
0,072
0,083
0,092
0,101
0,108
0,114
0,124
1
1,5 x D
0,5 x D
1xD
150
–
200
fz
0,044
0,060
0,072
0,083
0,092
0,101
0,108
0,114
0,124
2
1,5 x D
0,5 x D
1xD
140
–
190
fz
0,044
0,060
0,072
0,083
0,092
0,101
0,108
0,114
0,124
3
1,5 x D
0,5 x D
1xD
120
–
160
fz
0,036
0,050
0,061
0,070
0,079
0,087
0,095
0,101
0,114
4
1,5 x D
0,5 x D
0,75 x D
90
–
150
fz
0,033
0,045
0,054
0,062
0,070
0,077
0,083
0,088
0,098
5
1,5 x D
0,5 x D
1xD
60
–
100
fz
0,029
0,040
0,048
0,056
0,063
0,070
0,076
0,081
0,091
1
1,5 x D
0,5 x D
1xD
90
–
115
fz
0,036
0,050
0,061
0,070
0,079
0,087
0,095
0,101
0,114 0,091
2
1,5 x D
0,5 x D
1xD
60
–
80
fz
0,029
0,040
0,048
0,056
0,063
0,070
0,076
0,081
3
1,5 x D
0,5 x D
1xD
60
–
70
fz
0,025
0,034
0,040
0,047
0,052
0,057
0,061
0,065
0,071
1
1,5 x D
0,5 x D
1xD
120
–
150
fz
0,044
0,060
0,072
0,083
0,092
0,101
0,108
0,114
0,124
2
1,5 x D
0,5 x D
1xD
110
–
140
fz
0,036
0,050
0,061
0,070
0,079
0,087
0,095
0,101
0,114
3
1,5 x D
0,5 x D
1xD
110
–
130
fz
0,029
0,040
0,048
0,056
0,063
0,070
0,076
0,081
0,091
1
1,5 x D
0,3 x D
0,3 x D
50
–
90
fz
0,036
0,050
0,061
0,070
0,079
0,087
0,095
0,101
0,114 0,061
2
1,5 x D
0,3 x D
0,3 x D
25
–
40
fz
0,019
0,026
0,032
0,037
0,042
0,046
0,050
0,054
3
1,5 x D
0,3 x D
1xD
60
–
80
fz
0,029
0,040
0,048
0,056
0,063
0,070
0,076
0,081
0,091
4
1,5 x D
0,5 x D
1xD
50
–
60
fz
0,026
0,037
0,045
0,052
0,058
0,064
0,069
0,074
0,084
1
1,5 x D
0,5 x D
0,75 x D
80
–
140
fz
0,033
0,045
0,054
0,062
0,070
0,077
0,083
0,088
0,098
2
1,5 x D
0,2 x D
0,5 x D
70
–
120
fz
0,025
0,034
0,040
0,047
0,052
0,057
0,061
0,065
0,071
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
20
WID_Slimline_ITC_Issue_7_Bro_14-26.indd 20
widia.com
12/19/19 8:36 AM
High-Performance Solid Carbide End Mills • VariMill
™
Series 577E • VariMill II ER • Victory™ Grades ™
• Unequal flute spacing. • Centre cutting. • Optimised geometry for titanium machining. • Single tool for both roughing and finishing operations requiring fewer setups. • Standard items listed. Additional styles and coatings made-to-order.
End Mill Tolerances D1
tolerance e8
D
tolerance h6 +/-
≤3
-0,014/-0,028
≤3
0/-0,006
> 3–6
-0,020/-0,038
> 3–6
0/-0,008
> 6–10
-0,025/-0,047
> 6–10
0/-0,009
> 10–18
-0,032/-0,059
> 10–18
0/-0,011
> 18–30
-0,040/-0,073
> 18–30
0/-0,013
nn Series 577E • VariMill II ER • Victory Grades
WS15PE WS15PE AlTiN
WS15PE
WS15PE
order #
catalogue #
£
D1
D
length of cut Ap1 max
length L
Re
5599173
577E10024W
48.10
10,0
10
22,00
72
0,50
5599176
577E12015W
61.84
12,0
12
26,00
83
0,75
5599179
577E16016W
103.45
16,0
16
32,00
92
0,75
5599182
577E20017W
151.95
20,0
20
38,00
104
0,75
577E25018W
236.01
25,0
25
45,00
121
0,75
5599184
widia.com
WID_Slimline_ITC_Issue_7_Bro_14-26.indd 21
21
12/19/19 8:36 AM
High-Performance Solid Carbide End Mills • VariMill
™
Application Data • Series 577E • VariMill II™ ER • Victory™ Grades nn Series 577E • VariMill II ER • Victory Grades
Side Milling (A) and Slotting (B) A Material Group P
M
S
H
Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%.
WS15PE B
Cutting Speed — vc m/min
ap
ae
ap
min
5
1,5 x D
0,5 x D
1xD
60
–
6
1,5 x D
0,5 x D
0,75 x D
50
1
1,5 x D
0,5 x D
1xD
90
2
1,5 x D
0,5 x D
1xD
3
1,5 x D
0,5 x D
1
1,5 x D
0,3 x D
2
1,5 x D
0,3 x D
3
1,5 x D
4
1,5 x D
1 2
D1 — Diameter
max
mm
10,0
12,0
16,0
18,0
20,0
25,0
100
fz
0,048
0,056
0,070
0,076
0,081
0,091
–
75
fz
0,040
0,047
0,057
0,061
0,065
0,071
–
115
fz
0,061
0,070
0,087
0,095
0,101
0,114
60
–
80
fz
0,048
0,056
0,070
0,076
0,081
0,091
1xD
60
–
70
fz
0,040
0,047
0,057
0,061
0,065
0,071
0,3 x D
50
–
90
fz
0,061
0,070
0,087
0,095
0,101
0,114
0,3 x D
50
–
90
fz
0,032
0,037
0,046
0,050
0,054
0,061
0,3 x D
1xD
25
–
40
fz
0,048
0,056
0,070
0,076
0,081
0,091
0,5 x D
1xD
50
–
60
fz
0,045
0,052
0,064
0,069
0,074
0,084
1,5 x D
0,5 x D
0,75 x D
80
–
140
fz
0,054
0,062
0,077
0,083
0,088
0,098
1,5 x D
0,2 x D
0,5 x D
70
–
120
fz
0,040
0,047
0,057
0,061
0,065
0,071
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
22
WID_Slimline_ITC_Issue_7_Bro_14-26.indd 22
widia.com
12/19/19 8:36 AM
High-Performance Solid Carbide End Mills • VariMill
™
Series 77NE • VariMill III™ ER • With Neck • Victory™ Grades • Unequal flute spacing. • Centre cutting. • Optimised for difficult-to-machine workpiece materials. • Semi-finishing to finishing applications. • High-speed machining capability. • Standard items listed. Additional styles and coatings made-to-order.
Detail X
End Mill Tolerances D1
tolerance e8
D
tolerance h6 +/-
≤3
-0,014/-0,028
≤3
0/-0,006
> 3–6
-0,020/-0,038
> 3–6
0/-0,008
> 6–10
-0,025/-0,047
> 6–10
0/-0,009
> 10–18
-0,032/-0,059
> 10–18
0/-0,011
> 18–30
-0,040/-0,073
> 18–30
0/-0,013
nn Series 77NE • VariMill III ER • With Neck • Victory Grades
WS15PE AlTiN order #
catalogue #
£
D1
D
D3
length of cut Ap1 max
L3
length L
Re
BCH
5978039
77NE10004T
63.51
10,0
10
9,40
22,00
30,00
76
—
0,50
5978040
77NE10024T
66.39
10,0
10
9,40
22,00
30,00
76
0,50
—
5978096
77NE12005T
79.09
12,0
12
11,28
26,00
36,00
83
—
0,50
5978097
77NE12025T
86.90
12,0
12
11,28
26,00
36,00
83
0,50
—
5978104
77NE16006T
121.98
16,0
16
15,04
32,00
48,00
100
—
0,50
5978105
77NE16026T
128.25
16,0
16
15,04
32,00
48,00
100
0,50
—
5978112
77NE20007T
166.77
20,0
20
18,80
38,00
60,00
115
—
0,50
5978113
77NE20027T
175.10
20,0
20
18,80
38,00
60,00
115
0,50
—
widia.com
WID_Slimline_ITC_Issue_7_Bro_14-26.indd 23
23
12/19/19 8:36 AM
High-Performance Solid Carbide End Mills • VariMill
™
Application Data • Series 77NE • VariMill III™ ER • Victory™ Grades nn Series 77NE • VariMill III ER • With Neck • Semi-Finishing • Victory Grades
Material Group P
M
S
H
Side Milling (A)
WS15PE
A
Cutting Speed — vc m/min
ap
ae
min
4
Ap1 max
0,3 x D
90
5
Ap1 max
0,3 x D
60
1
Ap1 max
0,3 x D
2
Ap1 max
3
Ap1 max
1
Recommended feed per tooth (fz = mm/th) for side milling (A). D1 — Diameter
max
mm
10,0
12,0
16,0
18,0
20,0
–
150
fz
0,054
0,062
0,077
0,083
0,088
–
100
fz
0,048
0,056
0,070
0,076
0,081
90
–
115
fz
0,061
0,070
0,087
0,095
0,101
0,3 x D
60
–
80
fz
0,048
0,056
0,070
0,076
0,081
0,3 x D
60
–
70
fz
0,040
0,047
0,057
0,061
0,065
Ap1 max
0,3 x D
50
–
90
fz
0,061
0,070
0,087
0,095
0,101
2
Ap1 max
0,3 x D
25
–
40
fz
0,032
0,037
0,046
0,050
0,054
3
Ap1 max
0,3 x D
60
–
80
fz
0,048
0,056
0,070
0,076
0,081
4
Ap1 max
0,3 x D
50
–
60
fz
0,045
0,052
0,064
0,069
0,074
1
Ap1 max
0,3 x D
80
–
140
fz
0,054
0,062
0,077
0,083
0,088
2
Ap1 max
0,3 x D
70
–
120
fz
0,040
0,047
0,057
0,061
0,065
NOTE: L ower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
nn Series 77NE • VariMill III ER • With Neck • Finishing • Victory Grades
Material Group P
M
S
H
Side Milling (A)
WS15PE
A
Cutting Speed — vc m/min
Recommended feed per tooth (fz = mm/th) for side milling (A). D1 — Diameter
ap
ae
min
max
mm
10,0
12,0
16,0
18,0
20,0
4
Ap1 max
0,06 x D
180
–
300
fz
0,065
0,075
0,092
0,099
0,106
5
Ap1 max
0,06 x D
120
–
200
fz
0,058
0,067
0,084
0,091
0,097
1
Ap1 max
0,06 x D
180
–
230
fz
0,073
0,084
0,105
0,113
0,121
2
Ap1 max
0,06 x D
120
–
160
fz
0,058
0,067
0,084
0,091
0,097
3
Ap1 max
0,06 x D
120
–
140
fz
0,048
0,056
0,068
0,073
0,078
1
Ap1 max
0,06 x D
100
–
180
fz
0,073
0,084
0,105
0,113
0,121
2
Ap1 max
0,06 x D
50
–
80
fz
0,038
0,045
0,056
0,060
0,065
3
Ap1 max
0,06 x D
120
–
160
fz
0,058
0,067
0,084
0,091
0,097
4
Ap1 max
0,06 x D
100
–
120
fz
0,053
0,062
0,077
0,083
0,089
1
Ap1 max
0,06 x D
160
–
280
fz
0,065
0,075
0,092
0,099
0,106
2
Ap1 max
0,06 x D
140
–
240
fz
0,048
0,056
0,068
0,073
0,078
NOTE: L ower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
24
WID_Slimline_ITC_Issue_7_Bro_14-26.indd 24
widia.com
12/19/19 8:36 AM
High-Performance Solid Carbide End Mills • Roughing Series 4976 • Victory Grades ™
• Centre cutting. • Flat shallow pitch. • Standard items listed. Additional styles and coatings made-to-order.
Detail X
End Mill Tolerances D
tolerance h6 +/-
-0,020/-0,080
≤3
0/-0,006
-0,030/-0,105
> 3–6
0/-0,008
D1
tolerance d11
≤3 > 3–6 > 6–10
-0,040/-0,130
> 6–10
0/-0,009
> 10–18
-0,050/-0,160
> 10–18
0/-0,011
> 18–30
-0,065/-0,195
> 18–30
0/-0,013
nn Series 4976 • Victory Grades
grade WP15PE WP15PE AlTiN order #
catalogue #
£
D1
D
length of cut Ap1 max
length L
BCH
ZU
5560708
497604002T
46.03
4,0
6
8,00
57
0,30
3
5560709
497605002T
46.03
5,0
6
13,00
57
0,30
3
5560710
497606002T
46.03
6,0
6
13,00
57
0,30
3
5560711
497608003T
50.24
8,0
8
16,00
63
0,30
3
5560712
497610004T
63.26
10,0
10
22,00
72
0,50
4
5560713
497612005T
73.50
12,0
12
26,00
83
0,50
4
5560715
497616006T
128.38
16,0
16
32,00
92
0,50
4
5560717
497620007T
188.16
20,0
20
38,00
104
0,50
4
widia.com
WID_Slimline_ITC_Issue_7_Bro_14-26.indd 25
25
12/19/19 8:36 AM
High-Performance Solid Carbide End Mills • Roughing Application Data • Series 4976 • Victory™ Grades nn Series 4976 • Victory Grades
Side Milling (A) and Slotting (B) A Material Group
P
M
K
S
H
ap
ae
Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%.
WP15PE B
Cutting Speed — vc m/min
ap
min
max
D1 — Diameter mm
4,0
5,0
6,0
8,0
10,0
12,0
14,0
16,0
18,0
20,0
25,0
0
1,5 x D
0,5 x D
1xD
150
–
200
fz
0,028
0,036
0,044
0,060
0,072
0,083
0,092
0,101
0,108
0,114
0,124
1
1,5 x D
0,5 x D
1xD
150
–
200
fz
0,028
0,036
0,044
0,060
0,072
0,083
0,092
0,101
0,108
0,114
0,124
2
1,5 x D
0,5 x D
1xD
140
–
190
fz
0,028
0,036
0,044
0,060
0,072
0,083
0,092
0,101
0,108
0,114
0,124
3
1,5 x D
0,4 x D
0,75 x D
120
–
160
fz
0,023
0,030
0,036
0,050
0,061
0,070
0,079
0,087
0,095
0,101
0,114
4
1,5 x D
0,4 x D
0,75 x D
90
–
150
fz
0,021
0,027
0,033
0,045
0,054
0,062
0,070
0,077
0,083
0,088
0,098
5
1,5 x D
0,4 x D
0,75 x D
60
–
100
fz
0,019
0,024
0,029
0,040
0,048
0,056
0,063
0,070
0,076
0,081
0,091
1
1,5 x D
0,4 x D
0,75 x D
90
–
115
fz
0,023
0,030
0,036
0,050
0,061
0,070
0,079
0,087
0,095
0,101
0,114
2
1,5 x D
0,4 x D
0,75 x D
60
–
80
fz
0,019
0,024
0,029
0,040
0,048
0,056
0,063
0,070
0,076
0,081
0,091
3
1,5 x D
0,4 x D
0,75 x D
60
–
70
fz
0,016
0,020
0,025
0,034
0,040
0,047
0,052
0,057
0,061
0,065
0,071
1
1,5 x D
0,5 x D
1xD
120
–
150
fz
0,028
0,036
0,044
0,060
0,072
0,083
0,092
0,101
0,108
0,114
0,124
2
1,5 x D
0,4 x D
1xD
110
–
140
fz
0,023
0,030
0,036
0,050
0,061
0,070
0,079
0,087
0,095
0,101
0,114
3
1,5 x D
0,4 x D
1xD
110
–
130
fz
0,019
0,024
0,029
0,040
0,048
0,056
0,063
0,070
0,076
0,081
0,091
1
1,5 x D
0,3 x D
0,75 x D
50
–
90
fz
0,023
0,030
0,036
0,050
0,061
0,070
0,079
0,087
0,095
0,101
0,114
2
1,5 x D
0,3 x D
0,3 x D
25
–
40
fz
0,013
0,016
0,019
0,026
0,032
0,037
0,042
0,046
0,050
0,054
0,061
3
1,5 x D
0,4 x D
0,75 x D
60
–
80
fz
0,019
0,024
0,029
0,040
0,048
0,056
0,063
0,070
0,076
0,081
0,091
4
1,5 x D
0,3 x D
0,75 x D
50
–
60
fz
0,016
0,021
0,026
0,037
0,045
0,052
0,058
0,064
0,069
0,074
0,084
1
1,5 x D
0,3 x D
0,3 x D
80
–
140
fz
0,021
0,027
0,033
0,045
0,054
0,062
0,070
0,077
0,083
0,088
0,098
NOTE: L ower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
26
WID_Slimline_ITC_Issue_7_Bro_14-26.indd 26
widia.com
12/19/19 8:36 AM
High-Performance Solid Carbide End Mills • Roughing 4U50 Series • Victory™ Grades • Centre cutting. • Flat shallow pitch. • Unequal flute spacing. • Standard items listed. Additional styles and coatings made-to-order.
End Mill Tolerances
nn 4U50 Series • Victory Grades
AlTiN-MT grade AlTiN-MT AlTiN order # 6431403 6431404 6431405 6431406 6431407 6431408 6431409
catalogue # 4U50M060R2TC 4U50M080R3TC 4U50M100R4TE 4U50M120R5TE 4U50M160R6TE 4U50M200R7TG 4U50M250R8TG
£ 40.51 47.31 60.17 69.62 101.12 140.81 190.26
D1 6,0 8,0 10,0 12,0 16,0 20,0 25,0
D 6 8 10 12 16 20 25
D3 5,64 7,52 9,40 11,28 15,04 18,80 23,50
D1 ≤3
tolerance d11 -0,020/-0,080
D ≤3
tolerance h6 +/0/-0,006
> 3–6
-0,030/-0,105
> 3–6
0/-0,008
> 6–10
-0,040/-0,130
> 6–10
0/-0,009
> 10–18
-0,050/-0,160
> 10–18
0/-0,011
> 18–30
-0,065/-0,195
> 18–30
0/-0,013
length of cut Ap1 max 6,00 8,00 10,00 12,00 16,00 20,00 25,00
length L 57 63 72 83 92 104 121
L3 18,00 24,00 30,00 36,00 48,00 60,00 75,00
Rε 0,30 0,30 0,50 0,50 0,50 1,00 1,00
ZU 4 4 4 4 6 6 6
Application Data • 4U50 Series nn 4U50 Series
Side Milling (A) and Slotting (B)
Material Group 1 M 2 3 1 2 S 3 4
A ap 0,8 x D 0,8 x D 0,8 x D 0,8 x D 0,8 x D 0,8 x D 0,8 x D
B ae 0,5 x D 0,4 x D 0,4 x D 0,4 x D 0,25 x D 0,4 x D 0,3 x D
Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%.
AlTiN-MT
ap 0,75 x D 0,75 x D 0,75 x D 0,75 x D 0,3 x D 0,75 x D 0,3 x D
Cutting Speed — Vc m/min min 90 60 60 50 25 60 50
– – – – – – –
max 115 80 70 90 40 80 60
D1 — Diameter mm fz fz fz fz fz fz fz
6,0 0,036 0,029 0,025 0,036 0,019 0,029 0,026
8,0 0,050 0,040 0,034 0,050 0,026 0,040 0,037
10,0 0,061 0,048 0,040 0,061 0,032 0,048 0,045
12,0 0,070 0,056 0,047 0,070 0,037 0,056 0,052
14,0 0,079 0,063 0,052 0,079 0,042 0,063 0,058
16,0 0,087 0,070 0,057 0,087 0,046 0,070 0,064
18,0 0,095 0,076 0,061 0,095 0,050 0,076 0,069
20,0 0,101 0,081 0,065 0,101 0,054 0,081 0,074
25,0 0,114 0,091 0,071 0,114 0,061 0,091 0,084
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on diameters greater than 12mm.
widia.com
WID_Slimline_ITC_Issue_7_Bro_27-39.indd 27
27
1/7/20 8:41 AM
High-Performance Solid Carbide End Mills • Roughing 4U80 Series • Victory™ Grades • Centre cutting. • Flat shallow pitch. • Unequal flute spacing. • Standard items listed. Additional styles and coatings made-to-order.
End Mill Tolerances D1 ≤3 > 3–6 > 6–10 > 10–18 > 18–30
tolerance d11 -0,020/-0,080 -0,030/-0,105 -0,040/-0,130 -0,050/-0,160 -0,065/-0,195
D ≤3 > 3–6 > 6–10 > 10–18 > 18–30
tolerance h6 +/0/-0,006 0/-0,008 0/-0,009 0/-0,011 0/-0,013
nn 4U80 Series • Victory Grades
AlTiN-MT grade AlTiN-MT AlTiN order # 6431246 6431247 6431248 6431249 6431250 6431401 6431402
catalogue # 4U80M060R2TC 4U80M080R3TC 4U80M100R4TE 4U80M120R5TE 4U80M160R6TE 4U80M200R7TG 4U80M250R8TG
£ 42.59 49.90 62.12 73.08 107.10 148.68 200.34
D1 6,0 8,0 10,0 12,0 16,0 20,0 25,0
D 6 8 10 12 16 20 25
length of cut Ap1 max 13,00 16,00 22,00 26,00 32,00 38,00 45,00
length L 57 63 72 83 92 104 121
Rε 0,30 0,30 0,50 0,50 0,50 1,00 1,00
ZU 4 4 4 4 6 6 6
Application Data • 4U80 Series nn 4U80 Series
Side Milling (A) and Slotting (B)
AlTiN-MT
Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%.
Cutting Speed — Vc A B D1 — Diameter m/min Material Group ap ae ap min max mm 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0 25,0 1 1xD 0,5 x D 0,75 x D 90 – 115 fz 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101 0,114 M 2 1xD 0,5 x D 0,75 x D 60 – 80 fz 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081 0,091 3 1xD 0,5 x D 0,75 x D 60 – 70 fz 0,025 0,034 0,040 0,047 0,052 0,057 0,061 0,065 0,071 1 1xD 0,3 x D 0,75 x D 50 – 90 fz 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101 0,114 2 1xD 0,3 x D 0,3 x D 25 – 40 fz 0,019 0,026 0,032 0,037 0,042 0,046 0,050 0,054 0,061 S 3 1xD 0,4 x D 0,75 x D 60 – 80 fz 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081 0,091 4 1xD 0,4 x D 0,75 x D 50 – 60 fz 0,026 0,037 0,045 0,052 0,058 0,064 0,069 0,074 0,084 NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on diameters greater than 12mm.
28
WID_Slimline_ITC_Issue_7_Bro_27-39.indd 28
widia.com
1/7/20 8:41 AM
High-Performance Solid Carbide End Mills • Finishing Series 4503 JJ • JIS • Victory™ Grades • Centre cutting. • Standard items listed. Additional styles and coatings made-to-order. • Sharp corners.
End Mill Tolerances D1
tolerance e8
D
tolerance h6 +/-
≤3
-0,014/-0,028
≤3
0/-0,006
> 3–6
-0,020/-0,038
> 3–6
0/-0,008
> 6–10
-0,025/-0,047
> 6–10
0/-0,009
> 10–18
-0,032/-0,059
> 10–18
0/-0,011
> 18–30
-0,040/-0,073
> 18–30
0/-0,013
nn Series 4503 JJ • Victory Grades
grade WP15PE WP15PE AlTiN order #
catalogue #
£
D1
D
length of cut Ap1 max
length L
5559170
450301001T
12.55
1,0
4
3,00
50
5559172
450302001T
12.97
2,0
4
3,00
50
5559175
450303002T
13.88
3,0
6
8,00
50
5559177
450304002T
13.72
4,0
6
12,00
50
5559179
450305002T
13.82
5,0
6
14,00
50
5559180
450306002T
13.06
6,0
6
16,00
50
5559181
450308003T
18.54
8,0
8
20,00
63
5559182
450310004T
32.30
10,0
10
22,00
76
5559183
450312005T
49.70
12,0
12
25,00
76
5559184
450316006T
77.36
16,0
16
32,00
89
5559185
450320007T
129.27
20,0
20
38,00
104
widia.com
WID_Slimline_ITC_Issue_7_Bro_27-39.indd 29
29
1/7/20 8:41 AM
High-Performance Solid Carbide End Mills • Finishing Application Data • Series 4503 JJ • JIS • Victory™ Grades nn Series 4503 JJ • Victory Grades
Side Milling (A) and Slotting (B) A Material Group
P
M
K
S
H
Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%.
WP15PE B
Cutting Speed — vc m/min min
D1 — Diameter
ap
ae
ap
max mm 1,0
1,5
2,0
2,5
3,0
3,5
4,0
4,5
5,0
6,0
8,0
10,0 12,0 16,0 18,0 20,0
0
1,5 x D
0,3 x D
0,5 x D
150 – 200
fz 0,007 0,010 0,014 0,017 0,021 0,025 0,028 0,032 0,036 0,044 0,060 0,072 0,083 0,101 0,108 0,114
1
1,5 x D
0,3 x D
0,5 x D
150 – 200
fz 0,007 0,010 0,014 0,017 0,021 0,025 0,028 0,032 0,036 0,044 0,060 0,072 0,083 0,101 0,108 0,114
2
1,5 x D
0,3 x D
0,5 x D
140 – 190
fz 0,007 0,010 0,014 0,017 0,021 0,025 0,028 0,032 0,036 0,044 0,060 0,072 0,083 0,101 0,108 0,114
3
1,5 x D
0,3 x D
0,5 x D
120 – 160
fz 0,006 0,008 0,011 0,014 0,017 0,020 0,023 0,027 0,030 0,036 0,050 0,061 0,070 0,087 0,095 0,101
4
1,5 x D
0,3 x D
0,3 x D
90 – 150
fz 0,005 0,008 0,010 0,013 0,016 0,019 0,021 0,024 0,027 0,033 0,045 0,054 0,062 0,077 0,083 0,088
5
1,5 x D
0,3 x D
0,5 x D
60 – 100
fz 0,005 0,007 0,009 0,012 0,014 0,017 0,019 0,022 0,024 0,029 0,040 0,048 0,056 0,070 0,076 0,081
6
1,5 x D
0,3 x D
0,3 x D
50 – 75
fz 0,004 0,006 0,008 0,010 0,012 0,014 0,016 0,018 0,020 0,025 0,034 0,040 0,047 0,057 0,061 0,065
1
1,5 x D
0,3 x D
0,5 x D
90 – 115
fz 0,006 0,008 0,011 0,014 0,017 0,020 0,023 0,027 0,030 0,036 0,050 0,061 0,070 0,087 0,095 0,101
2
1,5 x D
0,3 x D
0,5 x D
60 – 80
fz 0,005 0,007 0,009 0,012 0,014 0,017 0,019 0,022 0,024 0,029 0,040 0,048 0,056 0,070 0,076 0,081
3
1,5 x D
0,3 x D
0,5 x D
60 – 70
fz 0,004 0,006 0,008 0,010 0,012 0,014 0,016 0,018 0,020 0,025 0,034 0,040 0,047 0,057 0,061 0,065
1
1,5 x D
0,3 x D
0,5 x D
120 – 150
fz 0,007 0,010 0,014 0,017 0,021 0,025 0,028 0,032 0,036 0,044 0,060 0,072 0,083 0,101 0,108 0,114
2
1,5 x D
0,3 x D
0,5 x D
110 – 140
fz 0,006 0,008 0,011 0,014 0,017 0,020 0,023 0,027 0,030 0,036 0,050 0,061 0,070 0,087 0,095 0,101
3
1,5 x D
0,3 x D
0,5 x D
110 – 130
fz 0,005 0,007 0,009 0,012 0,014 0,017 0,019 0,022 0,024 0,029 0,040 0,048 0,056 0,070 0,076 0,081
1
1,5 x D
0,3 x D
0,3 x D
50 – 90
fz 0,006 0,008 0,011 0,014 0,017 0,020 0,023 0,027 0,030 0,036 0,050 0,061 0,070 0,087 0,095 0,101
2
1,5 x D
0,3 x D
0,3 x D
25 – 40
fz 0,003 0,005 0,006 0,008 0,009 0,011 0,013 0,014 0,016 0,019 0,026 0,032 0,037 0,046 0,050 0,054
3
1,5 x D
0,3 x D
0,5 x D
60 – 80
fz 0,005 0,007 0,009 0,012 0,014 0,017 0,019 0,022 0,024 0,029 0,040 0,048 0,056 0,070 0,076 0,081
4
1,5 x D
0,3 x D
0,5 x D
50 – 60
fz 0,003 0,005 0,007 0,009 0,011 0,014 0,016 0,018 0,021 0,026 0,037 0,045 0,052 0,064 0,069 0,074
1
1,5 x D
0,3 x D
0,3 x D
80 – 140
fz 0,005 0,008 0,010 0,013 0,016 0,019 0,021 0,024 0,027 0,033 0,045 0,054 0,062 0,077 0,083 0,088
NOTE: L ower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
30
WID_Slimline_ITC_Issue_7_Bro_27-39.indd 30
widia.com
1/7/20 8:41 AM
High-Performance Solid Carbide End Mills • Finishing Series D507 D517 • Victory™ Grades • Centre cutting. • Standard items listed. Additional styles and coatings made-to-order.
End Mill Tolerances D1
tolerance e8
D
tolerance h6 +/-
≤3
-0,014/-0,028
≤3
0/-0,006
> 3–6
-0,020/-0,038
> 3–6
0/-0,008
> 6–10
-0,025/-0,047
> 6–10
0/-0,009
> 10–18
-0,032/-0,059
> 10–18
0/-0,011
> 18–30
-0,040/-0,073
> 18–30
0/-0,013
nn Series D507 D517 • Victory Grades
grade WP15PE WP15PE AlTiN order #
catalogue #
£
D1
D
length of cut Ap1 max
length L
5559100
D50706002W
16.71
6,0
6
10,00
54
5559108
D51706002W
19.36
6,0
6
13,00
57
5559101
D50708003W
24.39
8,0
8
12,00
58
5559109
D51708003W
24.72
8,0
8
19,00
63
5559102
D50710004W
31.68
10,0
10
14,00
66
5559110
D51710004W
40.52
10,0
10
22,00
72
5559103
D50712005W
38.23
12,0
12
16,00
73
5559111
D51712005W
49.05
12,0
12
26,00
83
5559105
D50716006W
71.53
16,0
16
22,00
82
5559113
D51716006W
93.57
16,0
16
32,00
92
5559107
D50720007W
107.66
20,0
20
26,00
92
5559115
D51720007W
127.87
20,0
20
38,00
104
widia.com
WID_Slimline_ITC_Issue_7_Bro_27-39.indd 31
31
1/7/20 8:41 AM
High-Performance Solid Carbide End Mills • Finishing Application Data • Series D507 D517 • Victory™ Grades nn Series D507 • Victory Grades
Material Group
P
M
K
S H
0 1 2 3 4 5 6 1 2 3 1 2 3 1 2 3 4 1
Side Milling (A)
WP15PE
A
Cutting Speed — vc m/min
ap
ae
min
1,0 x D 1,0 x D 1,0 x D 1,0 x D 1,0 x D 1,0 x D 1,0 x D 1,0 x D 1,0 x D 1,0 x D 1,0 x D 1,0 x D 1,0 x D 1,0 x D 1,0 x D 1,0 x D 1,0 x D 1,0 x D
0,2 x D 0,2 x D 0,2 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,15 x D 0,15 x D 0,1 x D
150 150 140 120 90 60 50 90 60 60 120 110 110 50 25 60 50 80
– – – – – – – – – – – – – – – – – –
Recommended feed per tooth (fz = mm/th) for side milling (A). D1 — Diameter
max
mm
4,0
6,0
8,0
10,0
12,0
14,0
16,0
18,0
20,0
200 200 190 160 150 100 75 115 80 70 150 140 130 90 40 80 60 140
fz fz fz fz fz fz fz fz fz fz fz fz fz fz fz fz fz fz
0,028 0,028 0,028 0,023 0,021 0,019 0,016 0,023 0,019 0,016 0,028 0,023 0,019 0,023 0,013 0,019 0,016 0,021
0,044 0,044 0,044 0,036 0,033 0,029 0,025 0,036 0,029 0,025 0,044 0,036 0,029 0,036 0,019 0,029 0,026 0,033
0,060 0,060 0,060 0,050 0,045 0,040 0,034 0,050 0,040 0,034 0,060 0,050 0,040 0,050 0,026 0,040 0,037 0,045
0,072 0,072 0,072 0,061 0,054 0,048 0,040 0,061 0,048 0,040 0,072 0,061 0,048 0,061 0,032 0,048 0,045 0,054
0,083 0,083 0,083 0,070 0,062 0,056 0,047 0,070 0,056 0,047 0,083 0,070 0,056 0,070 0,037 0,056 0,052 0,062
0,092 0,092 0,092 0,079 0,070 0,063 0,052 0,079 0,063 0,052 0,092 0,079 0,063 0,079 0,042 0,063 0,058 0,070
0,101 0,101 0,101 0,087 0,077 0,070 0,057 0,087 0,070 0,057 0,101 0,087 0,070 0,087 0,046 0,070 0,064 0,077
0,108 0,108 0,108 0,095 0,083 0,076 0,061 0,095 0,076 0,061 0,108 0,095 0,076 0,095 0,050 0,076 0,069 0,083
0,114 0,114 0,114 0,101 0,088 0,081 0,065 0,101 0,081 0,065 0,114 0,101 0,081 0,101 0,054 0,081 0,074 0,088
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
nn Series D517 • Victory Grades
Material Group
Side Milling (A)
WP15PE
A
Cutting Speed — vc m/min
ap
ae
min
Recommended feed per tooth (fz = mm/th) for side milling (A).
max
D1 — Diameter mm
4,0
6,0
8,0
10,0
12,0
14,0
16,0
0 Ap1 max 0,05 x D 150 – 200 fz 0,028 0,044 0,060 0,072 0,083 0,092 0,101 1 Ap1 max 0,05 x D 150 – 200 fz 0,028 0,044 0,060 0,072 0,083 0,092 0,101 2 Ap1 max 0,05 x D 140 – 190 fz 0,028 0,044 0,060 0,072 0,083 0,092 0,101 P 3 Ap1 max 0,05 x D 120 – 160 fz 0,023 0,036 0,050 0,061 0,070 0,079 0,087 4 Ap1 max 0,05 x D 90 – 150 fz 0,021 0,033 0,045 0,054 0,062 0,070 0,077 5 Ap1 max 0,05 x D 60 – 100 fz 0,019 0,029 0,040 0,048 0,056 0,063 0,070 6 Ap1 max 0,05 x D 50 – 75 fz 0,016 0,025 0,034 0,040 0,047 0,052 0,057 1 Ap1 max 0,05 x D 90 – 115 fz 0,023 0,036 0,050 0,061 0,070 0,079 0,087 M 2 Ap1 max 0,05 x D 60 – 80 fz 0,019 0,029 0,040 0,048 0,056 0,063 0,070 3 Ap1 max 0,05 x D 60 – 70 fz 0,016 0,025 0,034 0,040 0,047 0,052 0,057 1 Ap1 max 0,05 x D 120 – 150 fz 0,028 0,044 0,060 0,072 0,083 0,092 0,101 K 2 Ap1 max 0,05 x D 110 – 140 fz 0,023 0,036 0,050 0,061 0,070 0,079 0,087 3 Ap1 max 0,05 x D 110 – 130 fz 0,019 0,029 0,040 0,048 0,056 0,063 0,070 1 Ap1 max 0,04 x D 50 – 90 fz 0,023 0,036 0,050 0,061 0,070 0,079 0,087 2 Ap1 max 0,04 x D 25 – 40 fz 0,013 0,019 0,026 0,032 0,037 0,042 0,046 S 3 Ap1 max 0,05 x D 60 – 80 fz 0,019 0,029 0,040 0,048 0,056 0,063 0,070 4 Ap1 max 0,05 x D 50 – 60 fz 0,016 0,026 0,037 0,045 0,052 0,058 0,064 H 1 Ap1 max 0,04 x D 80 – 140 fz 0,021 0,033 0,045 0,054 0,062 0,070 0,077 NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. For better surface finish, reduce feed per tooth.
32
WID_Slimline_ITC_Issue_7_Bro_27-39.indd 32
18,0
20,0
0,108 0,108 0,108 0,095 0,083 0,076 0,061 0,095 0,076 0,061 0,108 0,095 0,076 0,095 0,050 0,076 0,069 0,083
0,114 0,114 0,114 0,101 0,088 0,081 0,065 0,101 0,081 0,065 0,114 0,101 0,081 0,101 0,054 0,081 0,074 0,088
widia.com
1/7/20 8:41 AM
High-Performance Solid Carbide End Mills • Aluminium Series 5103 • AluSurf ™ • Centre cutting. • Unequal flute spacing. • Wiper facet design for improved floor finishes. • Standard items listed. Additional styles and coatings made-to-order.
End Mill Tolerances D1
tolerance e8
D
tolerance h6 +/-
≤3
0/0,006
≤3
0/0,006
> 3–6
0/0,008
> 3–6
0/0,008
> 6–10
0/0,009
> 6–10
0/0,009
> 10–18
0/0,011
> 10–18
0/0,011
> 18–30
0/0,013
> 18–30
0/0,013
nn Series 5103 • AluSurf
UNCOATED grade UNCOATED order #
catalogue #
£
D1
D
length of cut Ap1 max
length L
3484693
510303000..
17.05
3,0
3
12,00
38
3484694
510304001..
18.41
4,0
4
12,00
50
3484695
510305001..
20.49
5,0
5
14,00
50
3484696
510306002..
19.90
6,0
6
16,00
50
3484697
510308003..
24.12
8,0
8
20,00
63
3484698
510310004..
32.12
10,0
10
22,00
76
3484699
510312005..
40.80
12,0
12
25,00
76
3350935
510316006..
64.17
16,0
16
32,00
89
3484702
510320007..
90.83
20,0
20
38,00
104
widia.com
WID_Slimline_ITC_Issue_7_Bro_27-39.indd 33
33
1/7/20 8:41 AM
High-Performance Solid Carbide End Mills • Aluminium Application Data • Series 5103 • AluSurf™ nn Series 5103 • AluSurf
For Side Milling (A) and Slotting (B) A Material Group N
ap
B ae
Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%.
uncoated
ap
Cutting Speed — vc m/min min
max
D1 — Diameter mm
3,0
6,0
8,0
10,0
12,0
16,0
20,0
1
1,5 x D
0,5 x D
1xD
500
–
2000
fz
0,027
0,054
0,072
0,090
0,108
0,144
0,180
2
1,5 x D
0,5 x D
1xD
500
–
1500
fz
0,024
0,049
0,065
0,081
0,097
0,130
0,162
NOTE: Multiply ap for milling machine spindle with ceramic bearings by 0,5. For better surface finish, reduce feed per tooth. Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on diameters >12mm.
34
WID_Slimline_ITC_Issue_7_Bro_27-39.indd 34
widia.com
1/7/20 8:41 AM
General Purpose HSS-E End Mills • Roughing/Finishing Series 6606 • Centre cutting. • Fine pitch.
P TiAlN
1
2
3
5
1
M 2 3
1
2
1
2
3
4
P - Steels M - Stainless Steels
K
S
K - Cast Iron N - Non-Ferrous
S - High-Temp Alloys H - Hard Materials
D
length of cut Ap1 max
length L
BCH
ZU
6,0
6
13,00
57
0,25
3
8,0
10
19,00
69
0,25
3
10,0
10
22,00
72
0,25
4
order #
TiAlN - LW
£
D1
1658089
660606002LW
21.33
1658123
660608004LW
25.73
1658154
660610004LW
22.41
1658188
660612005LW
26.76
12,0
12
26,00
83
0,35
4
1658254
660616006LW
35.16
16,0
16
32,00
92
0,35
4
1658315
660620007LW
51.46
20,0
20
38,00
104
0,35
4
1658372
660625008LW
86.00
25,0
25
45,00
121
0,50
5
Application Data • Series 6606 nn Series 6606 Series 6606
A
Group P1 P2 P3 P5 M1 M2 M3 K1 K2 S1 S2 S3 S4
ap 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D
B
ae 0,5 x D 0,5 x D 0,5 x D 0,3 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,3 x D 0,5 x D 0,3 x D
ap 1xD 1xD 1xD 0,5 x D 1xD 1xD 1xD 1xD 1xD 1xD 0,5 x D 1xD 0,5 x D
Recommended Feed per Tooth (Fz=mm/th) for Side Milling (A). For Slotting (B), reduce Fz by 20%.
TiAlN Cutting Speed — vc m/min min max 70 80 60 80 50 70 25 35 25 35 25 30 15 20 70 80 50 70 15 30 5 15 15 30 10 30
D1 — Diameter mm fz fz fz fz fz fz fz fz fz fz fz fz fz
6,0 0,040 0,040 0,034 0,027 0,034 0,027 0,023 0,040 0,034 0,034 0,018 0,027 0,024
8,0 0,055 0,055 0,046 0,036 0,046 0,036 0,031 0,055 0,046 0,046 0,024 0,036 0,033
10,0 0,063 0,063 0,053 0,042 0,053 0,042 0,035 0,063 0,053 0,053 0,028 0,042 0,039
12,0 0,070 0,070 0,059 0,047 0,059 0,047 0,039 0,070 0,059 0,059 0,031 0,047 0,043
16,0 0,078 0,078 0,066 0,053 0,066 0,053 0,044 0,078 0,066 0,066 0,035 0,053 0,049
20,0 0,085 0,085 0,073 0,059 0,073 0,059 0,048 0,085 0,073 0,073 0,039 0,059 0,054
25,0 0,104 0,104 0,096 0,076 0,096 0,076 0,060 0,104 0,096 0,096 0,051 0,076 0,070
Lower value of cutting speed is used for high-stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centers, please adjust parameters accordingly on diameters greater than 12mm.
widia.com
WID_Slimline_ITC_Issue_7_Bro_27-39.indd 35
35
1/7/20 8:41 AM
T H E A L L-S TA R P ROG R A M M E P ROV I D E S P ROV E N S O L U T I O N S T H AT A R E E A S Y TO F I N D A N D A LWAY S AVA I L A B L E. All-Star includes products from our most popular platforms, grades, and sizes grouped into our programme and guaranteed to be in stock with same-day shipping on orders placed before 4pm CET. Visit widia.com to see what products are available for same day shipping through all-star.
Turning
Tapping
Holemaking
TO SEE ALL PRODUCT LINES, VISIT OUR DIGITAL RESOURCES WIDIA NOVO™ Application Download to your desktop or tablet: widia.com/novo youtube.com/WIDIASolutions
WID_Slimline_ITC_Issue_7_Bro_27-39.indd 36
linkedin.com/WIDIAProductGrp
WIDIA™ Machining Central Mobile App Download for iOS or Android: widia.com/en/featured/WidiaMobileApp facebook.com/WIDIAProductGrp
To learn more, visit widia.com
1/7/20 8:41 AM
Proven Solutions
Indexable Milling
Easy to Find
Always Available
Solid End Milling
widia.com
WID_Slimline_ITC_Issue_7_Bro_27-39.indd 37
1/7/20 8:41 AM
Multiple-Material Drilling • WIDIA VariDrill ™
™
The new VariDrill advanced point geometry design offers the ultimate solution for multipurpose drilling operations. It offers dependable tool life in all materials due to less chipping on the cutting edge.
VariDrill • Reduced chipping on cutting edge means longer tool life. • New geometry design offers strength and versatility. • Delivers proper surface finish across multiple materials: steel, stainless steel, cast iron, aluminium, and high-temp alloys.
New WIDIA WU25PD™ drilling grade Extremely high wear resistance and longer tool life.
VariDrill core design Free chip flow and chip evacuation.
VariDrill point design Long tool life in all materials, less chipping on cutting edge.
38
WID_Slimline_ITC_Issue_7_Bro_27-39.indd 38
Marginless design
Precision shank
Distributes cutting forces evenly for less chipping on the cutting edge.
Low run out.
widia.com
1/7/20 8:41 AM
Innovative Technology VariDrill™ is a technologically advanced holemaking solution. These high-performance solid carbide drills were designed in Germany to provide the transportation, aerospace, general engineering, and energy industries with a tool that performs on multiple materials.
Elegance, Strength, and Versatility WIDIA’s engineers developed an innovative new design to deliver drilling performance. These Solid Carbide drills have a distinctive geometry and marginless design. The VariDrill point is versatile enough to work through steel, stainless steel, cast iron, aluminium, and a range of high-temp alloys.
Optimum Hole Quality The unique marginless design reduces chipping on the tool’s edge and stabilises cutting forces. This unique tool geometry enables chips to roll smoothly and evacuate easily, resulting in noticeably less friction, heat, jamming, and scratching. By minimising these drilling issues, VariDrill delivers an optimum surface finish with every hole — no matter the material.
More Options and Longer Tool Life Aside from its uniquely engineered design, VariDrill also offers a broad portfolio of drilling options. With more than 2,200 items, VariDrill offers more choices than any other drill for general engineering operations. And because most drills can be reconditioned, your tools will gain extended life.
VariDrill — innovatively designed and technologically advanced. Make VariDrill your go-to drill for hole after hole...after hole.
widia.com
WID_Slimline_ITC_Issue_7_Bro_27-39.indd 39
39
1/7/20 8:41 AM
Solid Carbide Drills VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D
nVDS201A/VDS401A • 3 x D
VDS201A • WU25PD VDS201A01000 VDS201A01016
£ 22.07 22.45
VDS401A • WU25PD — —
£ — —
D1 diameter mm in 1,000 .0394 1,016 .0400
VDS201A01041 VDS201A01067
22.45 22.45
— —
— —
1,041 1,067
.0410 .0420
VDS201A01092 VDS201A01100
22.45 22.45
— —
— —
1,092 1,100
.0430 .0433
VDS201A01181 VDS201A01191
22.45 22.45
— —
— —
1,181 1,191
.0465 .0469
VDS201A01200 VDS201A01300
22.45 22.45
— —
— —
1,200 1,300
.0472 .0512
VDS201A01321 VDS201A01397
22.45 22.45
— —
— —
1,321 1,397
.0520 .0550
VDS201A01400 VDS201A01500
22.45 22.45
— VDS401A01500
— 30.35
1,400 1,500
.0551 .0591
VDS201A01600 VDS201A01700
22.45 22.45
VDS401A01600 VDS401A01700
30.35 30.35
1,600 1,700
.0630 .0669
VDS201A01800 VDS201A01900
22.45 22.45
VDS401A01800 VDS401A01900
30.35 30.35
1,800 1,900
.0709 .0748
VDS201A01984 VDS201A02000
22.45 22.45
VDS401A01984 VDS401A02000
30.35 30.35
1,984 2,000
VDS201A02100 VDS201A02200
22.91 22.91
VDS401A02100 VDS401A02200
30.85 30.85
VDS201A02300 VDS201A02383
22.91 22.91
VDS401A02300 VDS401A02383
VDS201A02400 VDS201A02439
22.91 22.91
VDS201A02489 VDS201A02500
L4 max 5 5
L5 0,1 0,1
L 58 58
LS 28 28
5 5
0,2 0,2
58 58
28 28
5 5
0,2 0,2
58 58
28 28
5 5
0,2 0,2
58 58
28 28
5 5
0,2 0,2
58 58
28 28
5 5
0,2 0,2
58 58
28 28
5 6
0,2 0,2
58 58
28 28
6 6
0,2 0,3
58 58
28 28
6 6
0,3 0,3
58 58
28 28
.0781 .0787
10 10
0,3 0,3
58 58
28 28
2,100 2,200
.0827 .0866
10 10
0,3 0,3
58 58
28 28
30.85 30.85
2,300 2,383
.0906 .0938
10 12
0,4 0,4
58 58
28 28
VDS401A02400 VDS401A02439
30.85 30.85
2,400 2,439
.0945 .0960
12 12
0,4 0,4
58 58
28 28
22.91 22.91
VDS401A02489 VDS401A02500
30.85 30.85
2,489 2,500
.0980 .0984
12 12
0,4 0,4
58 58
28 28
VDS201A02578 VDS201A02600
22.91 22.91
VDS401A02578 VDS401A02600
30.85 30.85
2,578 2,600
.1015 .1024
12 12
0,4 0,4
58 58
28 28
VDS201A02642 VDS201A02700
22.91 22.91
VDS401A02642 VDS401A02700
30.85 30.85
2,642 2,700
.1040 .1063
12 12
0,4 0,4
58 58
28 28
VDS201A02705 VDS201A02779
22.91 22.91
VDS401A02705 VDS401A02779
30.85 30.85
2,705 2,779
.1065 .1094
12 12
0,4 0,4
58 58
28 28
VDS201A02800 VDS201A02820
22.91 22.91
VDS401A02800 VDS401A02820
30.85 30.85
2,800 2,820
.1102 .1110
12 12
0,5 0,5
58 58
28 28
VDS201A02870 VDS201A02900
22.91 22.91
VDS401A02870 VDS401A02900
30.85 30.85
2,870 2,900
.1130 .1142
12 12
0,5 0,5
58 58
28 28
VDS201A02947 VDS201A03000
22.91 22.91
VDS401A02947 VDS401A03000
30.85 30.85
2,947 3,000
.1160 .1181
12 14
0,5 0,5
58 62
28 36
D 4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 6
(continued)
40
WID_Slimline_ITC_Issue_7_Bro_40-45.indd 40
widia.com
1/7/20 8:40 AM
Solid Carbide Drills VariDrill • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D ™
(VDS201A/VDS401A • 3 x D continued)
£ 23.30 23.30
VDS401A • WU25PD VDS401A03048 VDS401A03100
£ 31.39 31.39
D1 diameter mm in 3,048 .1200 3,100 .1220
VDS201A03175 VDS201A03200
23.30 23.30
VDS401A03175 VDS401A03200
31.39 31.39
3,175 3,200
VDS201A03264 VDS201A03300
23.30 23.30
VDS401A03264 VDS401A03300
31.39 31.39
VDS201A03400 VDS201A03455
23.30 23.30
VDS401A03400 VDS401A03455
VDS201A03500 VDS201A03571
23.30 23.30
VDS201A03600 VDS201A03658
VDS201A • WU25PD VDS201A03048 VDS201A03100
L4 max 14 14
L5 0,5 0,5
L 62 62
LS 36 36
.1250 .1260
14 14
0,5 0,5
62 62
36 36
3,264 3,300
.1285 .1299
14 14
0,5 0,5
62 62
36 36
31.39 31.39
3,400 3,455
.1339 .1360
14 14
0,6 0,6
62 62
36 36
VDS401A03500 VDS401A03571
31.39 31.39
3,500 3,571
.1378 .1406
14 14
0,6 0,6
62 62
36 36
23.30 23.30
VDS401A03600 VDS401A03658
31.39 31.39
3,600 3,658
.1417 .1440
14 14
0,6 0,6
62 62
36 36
VDS201A03700 VDS201A03734
23.30 23.30
VDS401A03700 VDS401A03734
31.39 31.39
3,700 3,734
.1457 .1470
14 14
0,6 0,6
62 62
36 36
VDS201A03800 VDS201A03900
23.30 23.30
VDS401A03800 VDS401A03900
31.39 31.39
3,800 3,900
.1496 .1535
17 17
0,6 0,6
66 66
36 36
VDS201A03970 VDS201A04000
23.30 23.30
VDS401A03970 VDS401A04000
31.39 31.39
3,970 4,000
.1563 .1575
17 17
0,7 0,7
66 66
36 36
VDS201A04039 VDS201A04090
23.68 23.68
VDS401A04039 VDS401A04090
32.55 32.55
4,039 4,090
.1590 .1610
17 17
0,7 0,7
66 66
36 36
VDS201A04100 VDS201A04200
23.68 23.68
VDS401A04100 VDS401A04200
32.55 32.55
4,100 4,200
.1614 .1654
17 17
0,7 0,7
66 66
36 36
VDS201A04217 VDS201A04300
23.68 23.68
VDS401A04217 VDS401A04300
32.55 32.55
4,217 4,300
.1660 .1693
17 17
0,7 0,7
66 66
36 36
VDS201A04366 VDS201A04400
23.68 23.68
VDS401A04366 VDS401A04400
32.55 32.55
4,366 4,400
.1719 .1732
17 17
0,7 0,7
66 66
36 36
VDS201A04500 VDS201A04600
23.68 23.68
VDS401A04500 VDS401A04600
32.55 32.55
4,500 4,600
.1772 .1811
17 17
0,7 0,8
66 66
36 36
VDS201A04623 VDS201A04700
23.68 23.68
VDS401A04623 VDS401A04700
32.55 32.55
4,623 4,700
.1820 .1850
17 17
0,8 0,8
66 66
36 36
VDS201A04763 VDS201A04800
23.68 23.68
VDS401A04763 VDS401A04800
32.55 32.55
4,763 4,800
.1875 .1890
20 20
0,8 0,8
66 66
36 36
VDS201A04852 VDS201A04900
23.68 23.68
VDS401A04852 VDS401A04900
32.55 32.55
4,852 4,900
.1910 .1929
20 20
0,8 0,8
66 66
36 36
VDS201A05000 VDS201A05100
23.68 23.68
VDS401A05000 VDS401A05100
32.55 33.16
5,000 5,100
.1969 .2008
20 20
0,8 0,8
66 66
36 36
VDS201A05106 VDS201A05159
23.68 23.68
VDS401A05106 VDS401A05159
33.16 33.16
5,106 5,159
.2010 .2031
20 20
0,8 0,9
66 66
36 36
VDS201A05200 VDS201A05300
23.68 23.68
VDS401A05200 VDS401A05300
33.16 33.16
5,200 5,300
.2047 .2087
20 20
0,9 0,9
66 66
36 36
VDS201A05400 VDS201A05410
23.68 23.68
VDS401A05400 VDS401A05410
33.16 33.16
5,400 5,410
.2126 .2130
20 20
0,9 0,9
66 66
36 36
VDS201A05500 VDS201A05558
23.68 23.68
VDS401A05500 VDS401A05558
33.16 33.16
5,500 5,558
.2165 .2188
20 20
0,9 0,9
66 66
36 36
D 6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
(continued)
widia.com
WID_Slimline_ITC_Issue_7_Bro_40-45.indd 41
41
1/7/20 8:40 AM
Solid Carbide Drills VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D (VDS201A/VDS401A • 3 x D continued)
VDS201A • WU25PD VDS201A05600 VDS201A05616
£ 23.68 23.68
VDS401A • WU25PD VDS401A05600 VDS401A05616
£ 33.16 33.16
D1 diameter mm in 5,600 .2205 5,616 .2211
VDS201A05700 VDS201A05800
23.68 23.68
VDS401A05700 VDS401A05800
33.16 33.16
5,700 5,800
VDS201A05900 VDS201A05954
23.68 23.68
VDS401A05900 VDS401A05954
33.16 33.16
VDS201A06000 VDS201A06100
23.68 24.11
VDS401A06000 VDS401A06100
VDS201A06200 VDS201A06300
24.11 24.11
VDS201A06350 VDS201A06400
L4 max 20 20
L5 0,9 0,9
L 66 66
LS 36 36
D 6 6
.2244 .2283
20 20
1,0 1,0
66 66
36 36
5,900 5,954
.2323 .2344
20 20
1,0 1,0
66 66
36 36
33.16 36.13
6,000 6,100
.2362 .2402
20 24
1,0 1,0
66 79
36 36
VDS401A06200 VDS401A06300
36.13 36.13
6,200 6,300
.2441 .2480
24 24
1,0 1,1
79 79
36 36
24.11 24.11
VDS401A06350 VDS401A06400
36.13 36.13
6,350 6,400
.2500 .2520
24 24
1,1 1,1
79 79
36 36
VDS201A06500 VDS201A06528
24.11 24.11
VDS401A06500 VDS401A06528
36.13 36.13
6,500 6,528
.2559 .2570
24 24
1,1 1,1
79 79
36 36
VDS201A06600 VDS201A06630
24.11 24.11
VDS401A06600 VDS401A06630
36.13 36.13
6,600 6,630
.2598 .2610
24 24
1,1 1,1
79 79
36 36
VDS201A06700 VDS201A06746
24.11 24.11
VDS401A06700 VDS401A06746
36.13 36.13
6,700 6,746
.2638 .2656
24 24
1,1 1,1
79 79
36 36
VDS201A06800 VDS201A06900
24.11 24.11
VDS401A06800 VDS401A06900
36.13 36.13
6,800 6,900
.2677 .2717
24 24
1,1 1,2
79 79
36 36
VDS201A07000 VDS201A07100
24.11 24.92
VDS401A07000 VDS401A07100
36.13 38.67
7,000 7,100
.2756 .2795
24 29
1,2 1,2
79 79
36 36
VDS201A07145 VDS201A07200
24.92 24.92
VDS401A07145 VDS401A07200
38.67 38.67
7,145 7,200
.2813 .2835
29 29
1,2 1,2
79 79
36 36
VDS201A07300 VDS201A07400
24.92 24.92
VDS401A07300 VDS401A07400
38.67 38.67
7,300 7,400
.2874 .2913
29 29
1,2 1,3
79 79
36 36
VDS201A07500 VDS201A07541
24.92 24.92
VDS401A07500 VDS401A07541
38.67 38.67
7,500 7,541
.2953 .2969
29 29
1,3 1,3
79 79
36 36
VDS201A07600 VDS201A07700
24.92 24.92
VDS401A07600 VDS401A07700
38.67 38.67
7,600 7,700
.2992 .3031
29 29
1,3 1,3
79 79
36 36
VDS201A07800 VDS201A07900
24.92 24.92
VDS401A07800 VDS401A07900
38.67 38.67
7,800 7,900
.3071 .3110
29 29
1,3 1,3
79 79
36 36
VDS201A07938 VDS201A08000
24.92 24.92
VDS401A07938 VDS401A08000
38.67 38.67
7,938 8,000
.3125 .3150
29 29
1,3 1,4
79 79
36 36
VDS201A08100 VDS201A08200
27.27 27.27
VDS401A08100 VDS401A08200
42.45 42.45
8,100 8,200
.3189 .3228
35 35
1,4 1,4
89 89
40 40
10 10
VDS201A08300 VDS201A08334
27.27 27.27
VDS401A08300 VDS401A08334
42.45 42.45
8,300 8,334
.3268 .3281
35 35
1,4 1,4
89 89
40 40
10 10
VDS201A08400 VDS201A08433
27.27 27.27
VDS401A08400 VDS401A08433
42.45 42.45
8,400 8,433
.3307 .3320
35 35
1,4 1,4
89 89
40 40
10 10
VDS201A08500 VDS201A08600
27.27 27.27
VDS401A08500 VDS401A08600
42.45 42.45
8,500 8,600
.3346 .3386
35 35
1,4 1,5
89 89
40 40
10 10
VDS201A08700 VDS201A08733
27.27 27.27
VDS401A08700 VDS401A08733
42.45 42.45
8,700 8,733
.3425 .3438
35 35
1,5 1,5
89 89
40 40
10 10
VDS201A08800 VDS201A08900
27.27 27.27
VDS401A08800 VDS401A08900
42.45 42.45
8,800 8,900
.3465 .3504
35 35
1,5 1,5
89 89
40 40
10 10
6 6
6 6
6 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
(continued)
42
WID_Slimline_ITC_Issue_7_Bro_40-45.indd 42
widia.com
1/7/20 8:40 AM
Solid Carbide Drills VariDrill • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D ™
(VDS201A/VDS401A • 3 x D continued)
VDS201A • WU25PD VDS201A09000 VDS201A09100
£ 27.27 28.08
VDS401A • WU25PD VDS401A09000 VDS401A09100
£ 42.45 46.45
VDS201A09129 VDS201A09200
28.08 28.08
VDS401A09129 VDS401A09200
46.45 46.45
VDS201A09300 VDS201A09347
28.08 28.08
VDS401A09300 VDS401A09347
46.45 46.45
VDS201A09400 VDS201A09500
28.08 28.08
VDS401A09400 VDS401A09500
46.45 46.45
VDS201A09525 VDS201A09600
28.08 28.08
VDS401A09525 VDS401A09600
46.45 46.45
VDS201A09700 VDS201A09800
28.08 28.08
VDS401A09700 VDS401A09800
46.45 46.45
VDS201A09900 VDS201A09921
28.08 28.08
VDS401A09900 VDS401A09921
46.45 46.45
VDS201A10000 VDS201A10100
28.08 36.13
VDS401A10000 VDS401A10100
VDS201A10200 VDS201A10300
36.13 36.13
VDS201A10320 VDS201A10400
D1 diameter mm in .3543 9,000 .3583 9,100
L4 max 35 35
L5 1,5 1,5
L 89 89
LS 40 40
D 10 10
89 89
40 40
10 10
89 89
40 40
10 10
89 89
40 40
10 10
89 89
40 40
10 10
89 89
40 40
10 10
89 89
40 40
10 10
9,129 9,200
.3594 .3622
35 35
1,6 1,6
9,300 9,347
.3661 .3680
35 35
1,6 1,6
9,400 9,500
.3701 .3740
35 35
1,6 1,6
9,525 9,600
.3750 .3780
35 35
1,6 1,6
9,700 9,800
.3819 .3858
35 35
1,7 1,7
9,900 9,921
.3898 .3906
35 35
1,7 1,7
46.45 56.05
10,000 10,100
.3937 .3976
35 40
1,7 1,7
89 102
40 45
10 12
VDS401A10200 VDS401A10300
56.05 56.05
10,200 10,300
.4016 .4055
40 40
1,7 1,8
102 102
45 45
12 12
36.13 36.13
VDS401A10320 VDS401A10400
56.05 56.05
10,320 10,400
.4063 .4094
40 40
1,8 1,8
102 102
45 45
12 12
VDS201A10500 VDS201A10600
36.13 36.13
VDS401A10500 VDS401A10600
56.05 56.05
10,500 10,600
.4134 .4173
40 40
1,8 1,8
102 102
45 45
12 12
VDS201A10700 VDS201A10716
36.13 36.13
VDS401A10700 VDS401A10716
56.05 56.05
10,700 10,716
.4213 .4219
40 40
1,8 1,8
102 102
45 45
12 12
VDS201A10800 VDS201A10900
36.13 36.13
VDS401A10800 VDS401A10900
56.05 56.05
10,800 10,900
.4252 .4291
40 40
1,8 1,9
102 102
45 45
12 12
VDS201A11000 VDS201A11100
36.13 37.74
VDS401A11000 VDS401A11100
56.05 58.62
11,000 11,100
.4331 .4370
40 40
1,9 1,9
102 102
45 45
12 12
VDS201A11113 VDS201A11200
37.74 37.74
VDS401A11113 VDS401A11200
58.62 58.62
11,113 11,200
.4375 .4409
40 40
1,9 1,9
102 102
45 45
12 12
VDS201A11300 VDS201A11400
37.74 37.74
VDS401A11300 VDS401A11400
58.62 58.62
11,300 11,400
.4449 .4488
40 40
1,9 2,0
102 102
45 45
12 12
VDS201A11500 VDS201A11509
37.74 37.74
VDS401A11500 VDS401A11509
58.62 58.62
11,500 11,509
.4528 .4531
40 40
2,0 2,0
102 102
45 45
12 12
VDS201A11600 VDS201A11700
37.74 37.74
VDS401A11600 VDS401A11700
58.62 58.62
11,600 11,700
.4567 .4606
40 40
2,0 2,0
102 102
45 45
12 12
VDS201A11800 VDS201A11900
37.74 37.74
VDS401A11800 VDS401A11900
58.62 58.62
11,800 11,900
.4646 .4685
40 40
2,0 2,0
102 102
45 45
12 12
VDS201A11908 VDS201A12000
37.74 37.74
VDS401A11908 VDS401A12000
58.62 58.62
11,908 12,000
.4688 .4724
40 40
2,0 2,1
102 102
45 45
12 12
VDS201A12100 VDS201A12200
50.61 50.61
VDS401A12100 VDS401A12200
78.57 78.57
12,100 12,200
.4764 .4803
43 43
2,1 2,1
107 107
45 45
14 14
VDS201A12300 VDS201A12304
50.61 50.61
VDS401A12300 VDS401A12304
78.57 78.57
12,300 12,304
.4843 .4844
43 43
2,1 2,1
107 107
45 45
14 14
VDS201A12400 VDS201A12500
50.61 50.61
VDS401A12400 VDS401A12500
78.57 78.57
12,400 12,500
.4882 .4921
43 43
2,1 2,1
107 107
45 45
14 14
(continued)
widia.com
WID_Slimline_ITC_Issue_7_Bro_40-45.indd 43
43
1/7/20 8:40 AM
Solid Carbide Drills VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D (VDS201A/VDS401A • 3 x D continued)
VDS201A • WU25PD VDS201A12600 VDS201A12700
£ 50.61 50.61
VDS401A • WU25PD VDS401A12600 VDS401A12700
£ 78.57 78.57
D1 diameter mm in 12,600 .4961 12,700 .5000
VDS201A12800 VDS201A12900
50.61 50.61
VDS401A12800 VDS401A12900
78.57 78.57
12,800 12,900
VDS201A13000 VDS201A13096
50.61 52.22
VDS401A13000 VDS401A13096
78.57 80.88
VDS201A13100 VDS201A13200
52.22 52.22
VDS401A13100 VDS401A13200
VDS201A13300 VDS201A13400
52.22 52.22
VDS201A13500 VDS201A13600
L4 max 43 43
L5 2,2 2,2
L 107 107
LS 45 45
D 14 14
.5039 .5079
43 43
2,2 2,2
107 107
45 45
14 14
13,000 13,096
.5118 .5156
43 43
2,2 2,3
107 107
45 45
14 14
80.88 80.88
13,100 13,200
.5157 .5197
43 43
2,3 2,3
107 107
45 45
14 14
VDS401A13300 VDS401A13400
80.88 80.88
13,300 13,400
.5236 .5276
43 43
2,3 2,3
107 107
45 45
14 14
52.22 52.22
VDS401A13500 VDS401A13600
80.88 80.88
13,500 13,600
.5315 .5354
43 43
2,3 2,3
107 107
45 45
14 14
VDS201A13700 VDS201A13800
52.22 52.22
VDS401A13700 VDS401A13800
80.88 80.88
13,700 13,800
.5394 .5433
43 43
2,4 2,4
107 107
45 45
14 14
VDS201A13891 VDS201A13900
52.22 52.22
VDS401A13891 VDS401A13900
80.88 80.88
13,891 13,900
.5469 .5472
43 43
2,4 2,4
107 107
45 45
14 14
VDS201A14000 VDS201A14100
52.22 60.08
VDS401A14000 VDS401A14100
80.88 93.20
14,000 14,100
.5512 .5551
43 45
2,4 2,4
107 115
45 48
14 16
VDS201A14200 VDS201A14288
60.08 60.08
VDS401A14200 VDS401A14288
93.20 93.20
14,200 14,288
.5591 .5625
45 45
2,5 2,5
115 115
48 48
16 16
VDS201A14300 VDS201A14400
60.08 60.08
VDS401A14300 VDS401A14400
93.20 93.20
14,300 14,400
.5630 .5669
45 45
2,5 2,5
115 115
48 48
16 16
VDS201A14500 VDS201A14600
60.08 60.08
VDS401A14500 VDS401A14600
93.20 93.20
14,500 14,600
.5709 .5748
45 45
2,5 2,5
115 115
48 48
16 16
VDS201A14684 VDS201A14700
60.08 60.08
VDS401A14684 VDS401A14700
93.20 93.20
14,684 14,700
.5781 .5787
45 45
2,5 2,5
115 115
48 48
16 16
VDS201A14800 VDS201A14900
60.08 60.08
VDS401A14800 VDS401A14900
93.20 93.20
14,800 14,900
.5827 .5866
45 45
2,6 2,6
115 115
48 48
16 16
VDS201A15000 VDS201A15083
60.08 68.24
VDS401A15000 VDS401A15083
93.20 106.29
15,000 15,083
.5906 .5938
45 45
2,6 2,6
115 115
48 48
16 16
VDS201A15100 VDS201A15200
68.24 68.24
VDS401A15100 VDS401A15200
106.29 106.29
15,100 15,200
.5945 .5984
45 45
2,6 2,6
115 115
48 48
16 16
VDS201A15300 VDS201A15400
68.24 68.24
VDS401A15300 VDS401A15400
106.29 106.29
15,300 15,400
.6024 .6063
45 45
2,6 2,7
115 115
48 48
16 16
VDS201A15479 VDS201A15500
68.24 68.24
VDS401A15479 VDS401A15500
106.29 106.29
15,479 15,500
.6094 .6102
45 45
2,7 2,7
115 115
48 48
16 16
VDS201A15600 VDS201A15700
68.24 68.24
VDS401A15600 VDS401A15700
106.29 106.29
15,600 15,700
.6142 .6181
45 45
2,7 2,7
115 115
48 48
16 16
VDS201A15800 VDS201A15875
68.24 68.24
VDS401A15800 VDS401A15875
106.29 106.29
15,800 15,875
.6220 .6250
45 45
2,7 2,7
115 115
48 48
16 16
VDS201A15900 VDS201A16000
68.24 68.24
VDS401A15900 VDS401A16000
106.29 106.29
15,900 16,000
.6260 .6299
45 45
2,8 2,8
115 115
48 48
16 16
VDS201A16100 VDS201A16200
79.34 79.34
VDS401A16100 VDS401A16200
123.24 123.24
16,100 16,200
.6339 .6378
51 51
2,8 2,8
123 123
48 48
18 18
VDS201A16271 VDS201A16300
79.34 79.34
VDS401A16271 VDS401A16300
123.24 123.24
16,271 16,300
.6406 .6417
51 51
2,8 2,8
123 123
48 48
18 18
(continued)
44
WID_Slimline_ITC_Issue_7_Bro_40-45.indd 44
widia.com
1/7/20 8:40 AM
Solid Carbide Drills VariDrill • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D ™
(VDS201A/VDS401A • 3 x D continued)
VDS201A • WU25PD VDS201A16400 VDS201A16500
£ 79.34 79.34
VDS401A • WU25PD VDS401A16400 VDS401A16500
£ 123.24 123.24
D1 diameter mm in 16,400 .6457 16,500 .6496
VDS201A16600 VDS201A16670
79.34 79.34
VDS401A16600 VDS401A16670
123.24 123.24
16,600 16,670
VDS201A16700 VDS201A16800
79.34 79.34
VDS401A16700 VDS401A16800
123.24 123.24
VDS201A16900 VDS201A17000
79.34 79.34
VDS401A16900 VDS401A17000
VDS201A17100 VDS201A17200
95.13 95.13
VDS201A17300 VDS201A17400
L4 max 51 51
L5 2,8 2,9
L 123 123
LS 48 48
D 18 18
.6535 .6563
51 51
2,9 2,9
123 123
48 48
18 18
16,700 16,800
.6575 .6614
51 51
2,9 2,9
123 123
48 48
18 18
123.24 123.24
16,900 17,000
.6654 .6693
51 51
2,9 2,9
123 123
48 48
18 18
VDS401A17100 VDS401A17200
147.89 147.89
17,100 17,200
.6732 .6772
51 51
3,0 3,0
123 123
48 48
18 18
95.13 95.13
VDS401A17300 VDS401A17400
147.89 147.89
17,300 17,400
.6811 .6850
51 51
3,0 3,0
123 123
48 48
18 18
VDS201A17463 VDS201A17500
95.13 95.13
VDS401A17463 VDS401A17500
147.89 147.89
17,463 17,500
.6875 .6890
51 51
3,0 3,0
123 123
48 48
18 18
VDS201A17600 VDS201A17700
95.13 95.13
VDS401A17600 VDS401A17700
147.89 147.89
17,600 17,700
.6929 .6969
51 51
3,1 3,1
123 123
48 48
18 18
VDS201A17800 VDS201A17859
95.13 95.13
VDS401A17800 VDS401A17859
147.89 147.89
17,800 17,859
.7008 .7031
51 51
3,1 3,1
123 123
48 48
18 18
VDS201A17900 VDS201A18000
95.13 95.13
VDS401A17900 VDS401A18000
147.89 147.89
17,900 18,000
.7047 .7087
51 51
3,1 3,1
123 123
48 48
18 18
VDS201A18100 VDS201A18200
103.60 103.60
VDS401A18100 VDS401A18200
160.60 160.60
18,100 18,200
.7126 .7165
55 55
3,1 3,2
131 131
50 50
20 20
VDS201A18258 VDS201A18300
103.60 103.60
VDS401A18258 VDS401A18300
160.60 160.60
18,258 18,300
.7188 .7205
55 55
3,2 3,2
131 131
50 50
20 20
VDS201A18400 VDS201A18500
103.60 103.60
VDS401A18400 VDS401A18500
160.60 160.60
18,400 18,500
.7244 .7283
55 55
3,2 3,2
131 131
50 50
20 20
VDS201A18600 VDS201A18654
103.60 103.60
VDS401A18600 VDS401A18654
160.60 160.60
18,600 18,654
.7323 .7344
55 55
3,2 3,2
131 131
50 50
20 20
VDS201A18700 VDS201A18800
103.60 103.60
VDS401A18700 VDS401A18800
160.60 160.60
18,700 18,800
.7362 .7402
55 55
3,2 3,3
131 131
50 50
20 20
VDS201A18900 VDS201A19000
103.60 103.60
VDS401A18900 VDS401A19000
160.60 160.60
18,900 19,000
.7441 .7480
55 55
3,3 3,3
131 131
50 50
20 20
VDS201A19050 VDS201A19100
111.31 111.31
VDS401A19050 VDS401A19100
172.54 172.54
19,050 19,100
.7500 .7520
55 55
3,3 3,3
131 131
50 50
20 20
VDS201A19200 VDS201A19300
111.31 111.31
VDS401A19200 VDS401A19300
172.54 172.54
19,200 19,300
.7559 .7598
55 55
3,3 3,4
131 131
50 50
20 20
VDS201A19400 VDS201A19500
111.31 111.31
VDS401A19400 VDS401A19500
172.54 172.54
19,400 19,500
.7638 .7677
55 55
3,4 3,4
131 131
50 50
20 20
VDS201A19600 VDS201A19700
111.31 111.31
VDS401A19600 VDS401A19700
172.54 172.54
19,600 19,700
.7717 .7756
55 55
3,4 3,4
131 131
50 50
20 20
VDS201A19800 VDS201A19900
111.31 111.31
VDS401A19800 VDS401A19900
172.54 172.54
19,800 19,900
.7795 .7835
55 55
3,4 3,5
131 131
50 50
20 20
VDS201A20000
111.31
VDS401A20000
172.54
20,000
.7874
55
3,5
131
50
20
NOTE: L4 max, L5, L, LS, and D table columns reflect millimetre measurements.
widia.com
WID_Slimline_ITC_Issue_7_Bro_40-45.indd 45
45
1/7/20 8:40 AM
Solid Carbide Drills VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D
nVDS202A/VDS402A • 5 x D
VDS202A • WU25PD VDS202A01000 VDS202A01016
£ 27.62 28.08
VDS402A • WU25PD — —
£ — —
D1 diameter mm in 1,000 .0394 1,016 .0400
VDS202A01041 VDS202A01067
28.08 28.08
— —
— —
1,041 1,067
.0410 .0420
VDS202A01092 VDS202A01100
28.08 28.08
— —
— —
1,092 1,100
.0430 .0433
VDS202A01181 VDS202A01191
28.08 28.08
— —
— —
1,181 1,191
.0465 .0469
VDS202A01200 VDS202A01300
28.08 28.08
— —
— —
1,200 1,300
.0472 .0512
VDS202A01321 VDS202A01397
28.08 28.08
— —
— —
1,321 1,397
.0520 .0550
VDS202A01400 VDS202A01500
28.08 28.08
— VDS402A01500
— 37.90
1,400 1,500
.0551 .0591
VDS202A01600 VDS202A01700
28.08 28.08
VDS402A01600 VDS402A01700
37.90 37.90
1,600 1,700
.0630 .0669
VDS202A01800 VDS202A01900
28.08 28.08
VDS402A01800 VDS402A01900
37.90 37.90
1,800 1,900
.0709 .0748
VDS202A01984 VDS202A02000
28.08 28.08
VDS402A01984 VDS402A02000
37.90 37.90
1,984 2,000
VDS202A02100 VDS202A02200
28.61 28.61
VDS402A02100 VDS402A02200
38.67 38.67
VDS202A02300 VDS202A02383
28.61 28.61
VDS402A02300 VDS402A02383
VDS202A02400 VDS202A02439
28.61 28.61
VDS202A02489 VDS202A02500
L4 max 6 6
L5 0,1 0,1
6 6
0,2 0,2
6 6
0,2 0,2
6 6
0,2 0,2
6 6
0,2 0,2
6 6
0,2 0,2
6 9
0,2 0,2
9 9
0,2 0,3
9 9
0,3 0,3
.0781 .0787
14 14
0,3 0,3
2,100 2,200
.0827 .0866
14 14
0,3 0,3
38.67 38.67
2,300 2,383
.0906 .0938
14 17
0,4 0,4
VDS402A02400 VDS402A02439
38.67 38.67
2,400 2,439
.0945 .0960
17 17
0,4 0,4
28.61 28.61
VDS402A02489 VDS402A02500
38.67 38.67
2,489 2,500
.0980 .0984
17 17
0,4 0,4
VDS202A02578 VDS202A02600
28.61 28.61
VDS402A02578 VDS402A02600
38.67 38.67
2,578 2,600
.1015 .1024
17 17
0,4 0,4
VDS202A02642 VDS202A02700
28.61 28.61
VDS402A02642 VDS402A02700
38.67 38.67
2,642 2,700
.1040 .1063
17 17
0,4 0,4
VDS202A02705 VDS202A02779
28.61 28.61
VDS402A02705 VDS402A02779
38.67 38.67
2,705 2,779
.1065 .1094
17 17
0,4 0,4
VDS202A02800 VDS202A02820
28.61 28.61
VDS402A02800 VDS402A02820
38.67 38.67
2,800 2,820
.1102 .1110
17 17
0,5 0,5
VDS202A02870 VDS202A02900
28.61 28.61
VDS402A02870 VDS402A02900
38.67 38.67
2,870 2,900
.1130 .1142
17 17
0,5 0,5
VDS202A02947 VDS202A03000
28.61 28.61
VDS402A02947 VDS402A03000
38.67 38.67
2,947 3,000
.1160 .1181
17 23
0,5 0,5
L 58 58
LS 28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 66
28 36
D 4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 6
(continued)
46
WID_Slimline_ITC_Issue_7_Bro_46-51.indd 46
widia.com
1/7/20 8:40 AM
Solid Carbide Drills VariDrill • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D ™
(VDS202A/VDS402A • 5 x D continued)
VDS202A • WU25PD VDS202A03048 VDS202A03100
£ 29.07 29.07
VDS402A • WU25PD VDS402A03048 VDS402A03100
£ 39.36 39.36
D1 diameter mm in 3,048 .1200 3,100 .1220
VDS202A03175 VDS202A03200
29.07 29.07
VDS402A03175 VDS402A03200
39.36 39.36
3,175 3,200
VDS202A03264 VDS202A03300
29.07 29.07
VDS402A03264 VDS402A03300
39.36 39.36
VDS202A03400 VDS202A03455
29.07 29.07
VDS402A03400 VDS402A03455
VDS202A03500 VDS202A03571
29.07 29.07
VDS202A03600 VDS202A03658
L4 max 23 23
L5 0,5 0,5
.1250 .1260
23 23
0,5 0,5
3,264 3,300
.1285 .1299
23 23
0,5 0,5
39.36 39.36
3,400 3,455
.1339 .1360
23 23
0,6 0,6
VDS402A03500 VDS402A03571
39.36 39.36
3,500 3,571
.1378 .1406
23 23
0,6 0,6
29.07 29.07
VDS402A03600 VDS402A03658
39.36 39.36
3,600 3,658
.1417 .1440
23 23
0,6 0,6
VDS202A03700 VDS202A03734
29.07 29.07
VDS402A03700 VDS402A03734
39.36 39.36
3,700 3,734
.1457 .1470
23 23
0,6 0,6
VDS202A03800 VDS202A03900
29.07 29.07
VDS402A03800 VDS402A03900
39.36 39.36
3,800 3,900
.1496 .1535
29 29
0,6 0,6
VDS202A03970 VDS202A04000
29.07 29.07
VDS402A03970 VDS402A04000
39.36 39.36
3,970 4,000
.1563 .1575
29 29
0,7 0,7
VDS202A04039 VDS202A04090
29.61 29.61
VDS402A04039 VDS402A04090
40.75 40.75
4,039 4,090
.1590 .1610
29 29
0,7 0,7
VDS202A04100 VDS202A04200
29.61 29.61
VDS402A04100 VDS402A04200
40.75 40.75
4,100 4,200
.1614 .1654
29 29
0,7 0,7
VDS202A04217 VDS202A04300
29.61 29.61
VDS402A04217 VDS402A04300
40.75 40.75
4,217 4,300
.1660 .1693
29 29
0,7 0,7
VDS202A04366 VDS202A04400
29.61 29.61
VDS402A04366 VDS402A04400
40.75 40.75
4,366 4,400
.1719 .1732
29 29
0,7 0,7
VDS202A04500 VDS202A04600
29.61 29.61
VDS402A04500 VDS402A04600
40.75 40.75
4,500 4,600
.1772 .1811
29 29
0,7 0,8
VDS202A04623 VDS202A04700
29.61 29.61
VDS402A04623 VDS402A04700
40.75 40.75
4,623 4,700
.1820 .1850
29 29
0,8 0,8
VDS202A04763 VDS202A04800
29.61 29.61
VDS402A04763 VDS402A04800
40.75 40.75
4,763 4,800
.1875 .1890
35 35
0,8 0,8
VDS202A04852 VDS202A04900
29.61 29.61
VDS402A04852 VDS402A04900
40.75 40.75
4,852 4,900
.1910 .1929
35 35
0,8 0,8
VDS202A05000 VDS202A05100
29.61 29.61
VDS402A05000 VDS402A05100
40.75 41.44
5,000 5,100
.1969 .2008
35 35
0,8 0,8
VDS202A05106 VDS202A05159
29.61 29.61
VDS402A05106 VDS402A05159
41.44 41.44
5,106 5,159
.2010 .2031
35 35
0,8 0,9
VDS202A05200 VDS202A05300
29.61 29.61
VDS402A05200 VDS402A05300
41.44 41.44
5,200 5,300
.2047 .2087
35 35
0,9 0,9
VDS202A05400 VDS202A05410
29.61 29.61
VDS402A05400 VDS402A05410
41.44 41.44
5,400 5,410
.2126 .2130
35 35
0,9 0,9
VDS202A05500 VDS202A05558
29.61 29.61
VDS402A05500 VDS402A05558
41.44 41.44
5,500 5,558
.2165 .2188
35 35
0,9 0,9
L 66 66
LS 36 36
66 66
36 36
66 66
36 36
66 66
36 36
66 66
36 36
66 66
36 36
66 66
36 36
74 74
36 36
74 74
36 36
74 74
36 36
74 74
36 36
74 74
36 36
74 74
36 36
74 74
36 36
74 74
36 36
82 82
36 36
82 82
36 36
82 82
36 36
82 82
36 36
82 82
36 36
82 82
36 36
82 82
36 36
D 6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
(continued)
widia.com
WID_Slimline_ITC_Issue_7_Bro_46-51.indd 47
47
1/7/20 8:40 AM
Solid Carbide Drills VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D (VDS202A/VDS402A • 5 x D continued)
VDS202A • WU25PD VDS202A05600 VDS202A05616
£ 29.62 29.62
VDS402A • WU25PD VDS402A05600 VDS402A05616
£ 41.44 41.44
D1 diameter mm in 5,600 .2205 5,616 .2211
VDS202A05700 VDS202A05800
29.62 29.62
VDS402A05700 VDS402A05800
41.44 41.44
5,700 5,800
VDS202A05900 VDS202A05954
29.62 29.62
VDS402A05900 VDS402A05954
41.44 41.44
VDS202A06000 VDS202A06100
29.62 30.04
VDS402A06000 VDS402A06100
VDS202A06200 VDS202A06300
30.04 30.04
VDS202A06350 VDS202A06400
L4 max 35 35
L5 0,9 0,9
L 82 82
LS 36 36
.2244 .2283
35 35
1,0 1,0
82 82
36 36
5,900 5,954
.2323 .2344
35 35
1,0 1,0
82 82
36 36
41.44 45.14
6,000 6,100
.2362 .2402
35 43
1,0 1,0
82 91
36 36
VDS402A06200 VDS402A06300
45.14 45.14
6,200 6,300
.2441 .2480
43 43
1,0 1,1
91 91
36 36
30.04 30.04
VDS402A06350 VDS402A06400
45.14 45.14
6,350 6,400
.2500 .2520
43 43
1,1 1,1
91 91
36 36
VDS202A06500 VDS202A06528
30.04 30.04
VDS402A06500 VDS402A06528
45.14 45.14
6,500 6,528
.2559 .2570
43 43
1,1 1,1
91 91
36 36
VDS202A06600 VDS202A06630
30.04 30.04
VDS402A06600 VDS402A06630
45.14 45.14
6,600 6,630
.2598 .2610
43 43
1,1 1,1
91 91
36 36
VDS202A06700 VDS202A06746
30.04 30.04
VDS402A06700 VDS402A06746
45.14 45.14
6,700 6,746
.2638 .2656
43 43
1,1 1,1
91 91
36 36
VDS202A06800 VDS202A06900
30.04 30.04
VDS402A06800 VDS402A06900
45.14 45.14
6,800 6,900
.2677 .2717
43 43
1,1 1,2
91 91
36 36
VDS202A07000 VDS202A07100
30.04 31.12
VDS402A07000 VDS402A07100
45.14 48.30
7,000 7,100
.2756 .2795
43 43
1,2 1,2
91 91
36 36
VDS202A07145 VDS202A07200
31.12 31.12
VDS402A07145 VDS402A07200
48.30 48.30
7,145 7,200
.2813 .2835
43 43
1,2 1,2
91 91
36 36
VDS202A07300 VDS202A07400
31.12 31.12
VDS402A07300 VDS402A07400
48.30 48.30
7,300 7,400
.2874 .2913
43 43
1,2 1,3
91 91
36 36
VDS202A07500 VDS202A07541
31.12 31.12
VDS402A07500 VDS402A07541
48.30 48.30
7,500 7,541
.2953 .2969
43 43
1,3 1,3
91 91
36 36
VDS202A07600 VDS202A07700
31.12 31.12
VDS402A07600 VDS402A07700
48.30 48.30
7,600 7,700
.2992 .3031
43 43
1,3 1,3
91 91
36 36
VDS202A07800 VDS202A07900
31.12 31.12
VDS402A07800 VDS402A07900
48.30 48.30
7,800 7,900
.3071 .3110
43 43
1,3 1,3
91 91
36 36
VDS202A07938 VDS202A08000
31.12 31.12
VDS402A07938 VDS402A08000
48.30 48.30
7,938 8,000
.3125 .3150
43 43
1,3 1,4
91 91
36 36
VDS202A08100 VDS202A08200
34.13 34.13
VDS402A08100 VDS402A08200
52.92 52.92
8,100 8,200
.3189 .3228
49 49
1,4 1,4
103 103
40 40
10 10
VDS202A08300 VDS202A08334
34.13 34.13
VDS402A08300 VDS402A08334
52.92 52.92
8,300 8,334
.3268 .3281
49 49
1,4 1,4
103 103
40 40
10 10
VDS202A08400 VDS202A08433
34.13 34.13
VDS402A08400 VDS402A08433
52.92 52.92
8,400 8,433
.3307 .3320
49 49
1,4 1,4
103 103
40 40
10 10
VDS202A08500 VDS202A08600
34.13 34.13
VDS402A08500 VDS402A08600
52.92 52.92
8,500 8,600
.3346 .3386
49 49
1,4 1,5
103 103
40 40
10 10
VDS202A08700 VDS202A08733
34.13 34.13
VDS402A08700 VDS402A08733
52.92 52.92
8,700 8,733
.3425 .3438
49 49
1,5 1,5
103 103
40 40
10 10
VDS202A08800 VDS202A08900
34.13 34.13
VDS402A08800 VDS402A08900
52.92 52.92
8,800 8,900
.3465 .3504
49 49
1,5 1,5
103 103
40 40
10 10
D 6 6
6 6
6 6
6 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
(continued)
48
WID_Slimline_ITC_Issue_7_Bro_46-51.indd 48
widia.com
1/7/20 8:40 AM
Solid Carbide Drills VariDrill • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D ™
(VDS202A/VDS402A • 5 x D continued)
VDS202A • WU25PD VDS202A09000 VDS202A09100
£ 34.13 39.36
VDS402A • WU25PD VDS402A09000 VDS402A09100
£ 52.92 53.30
VDS202A09129 VDS202A09200
39.36 39.36
VDS402A09129 VDS402A09200
53.30 53.30
VDS202A09300 VDS202A09347
39.36 39.36
VDS402A09300 VDS402A09347
53.30 53.30
VDS202A09400 VDS202A09500
39.36 39.36
VDS402A09400 VDS402A09500
53.30 53.30
VDS202A09525 VDS202A09600
39.36 39.36
VDS402A09525 VDS402A09600
53.30 53.30
VDS202A09700 VDS202A09800
39.36 39.36
VDS402A09700 VDS402A09800
53.30 53.30
VDS202A09900 VDS202A09921
39.36 39.36
VDS402A09900 VDS402A09921
53.30 53.30
VDS202A10000 VDS202A10100
39.36 45.14
VDS402A10000 VDS402A10100
VDS202A10200 VDS202A10300
45.14 45.14
VDS202A10320 VDS202A10400
D1 diameter mm in .3543 9,000 .3583 9,100
L4 max 49 49
L5 1,5 1,5
L 103 103
LS 40 40
D 10 10
9,129 9,200
.3594 .3622
49 49
1,6 1,6
103 103
40 40
10 10
9,300 9,347
.3661 .3680
49 49
1,6 1,6
103 103
40 40
10 10
9,400 9,500
.3701 .3740
49 49
1,6 1,6
103 103
40 40
10 10
9,525 9,600
.3750 .3780
49 49
1,6 1,6
103 103
40 40
10 10
9,700 9,800
.3819 .3858
49 49
1,7 1,7
103 103
40 40
10 10
9,900 9,921
.3898 .3906
49 49
1,7 1,7
103 103
40 40
10 10
53.30 70.09
10,000 10,100
.3937 .3976
49 56
1,7 1,7
103 118
40 45
10 12
VDS402A10200 VDS402A10300
70.09 70.09
10,200 10,300
.4016 .4055
56 56
1,7 1,8
118 118
45 45
12 12
45.14 45.14
VDS402A10320 VDS402A10400
70.09 70.09
10,320 10,400
.4063 .4094
56 56
1,8 1,8
118 118
45 45
12 12
VDS202A10500 VDS202A10600
45.14 45.14
VDS402A10500 VDS402A10600
70.09 70.09
10,500 10,600
.4134 .4173
56 56
1,8 1,8
118 118
45 45
12 12
VDS202A10700 VDS202A10716
45.14 45.14
VDS402A10700 VDS402A10716
70.09 70.09
10,700 10,716
.4213 .4219
56 56
1,8 1,8
118 118
45 45
12 12
VDS202A10800 VDS202A10900
45.14 45.14
VDS402A10800 VDS402A10900
70.09 70.09
10,800 10,900
.4252 .4291
56 56
1,8 1,9
118 118
45 45
12 12
VDS202A11000 VDS202A11100
45.14 47.14
VDS402A11000 VDS402A11100
70.09 73.26
11,000 11,100
.4331 .4370
56 56
1,9 1,9
118 118
45 45
12 12
VDS202A11113 VDS202A11200
47.14 47.14
VDS402A11113 VDS402A11200
73.26 73.26
11,113 11,200
.4375 .4409
56 56
1,9 1,9
118 118
45 45
12 12
VDS202A11300 VDS202A11400
47.14 47.14
VDS402A11300 VDS402A11400
73.26 73.26
11,300 11,400
.4449 .4488
56 56
1,9 2,0
118 118
45 45
12 12
VDS202A11500 VDS202A11509
47.14 47.14
VDS402A11500 VDS402A11509
73.26 73.26
11,500 11,509
.4528 .4531
56 56
2,0 2,0
118 118
45 45
12 12
VDS202A11600 VDS202A11700
47.14 47.14
VDS402A11600 VDS402A11700
73.26 73.26
11,600 11,700
.4567 .4606
56 56
2,0 2,0
118 118
45 45
12 12
VDS202A11800 VDS202A11900
47.14 47.14
VDS402A11800 VDS402A11900
73.26 73.26
11,800 11,900
.4646 .4685
56 56
2,0 2,0
118 118
45 45
12 12
VDS202A11908 VDS202A12000
47.14 47.14
VDS402A11908 VDS402A12000
73.26 73.26
11,908 12,000
.4688 .4724
56 56
2,0 2,1
118 118
45 45
12 12
VDS202A12100 VDS202A12200
63.24 63.24
VDS402A12100 VDS402A12200
97.82 97.82
12,100 12,200
.4764 .4803
60 60
2,1 2,1
124 124
45 45
14 14
VDS202A12300 VDS202A12304
63.24 63.24
VDS402A12300 VDS402A12304
97.82 97.82
12,300 12,304
.4843 .4844
60 60
2,1 2,1
124 124
45 45
14 14
VDS202A12400 VDS202A12500
63.24 63.24
VDS402A12400 VDS402A12500
97.82 97.82
12,400 12,500
.4882 .4921
60 60
2,1 2,1
124 124
45 45
14 14
(continued)
widia.com
WID_Slimline_ITC_Issue_7_Bro_46-51.indd 49
49
1/7/20 8:40 AM
Solid Carbide Drills VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D (VDS202A/VDS402A • 5 x D continued)
VDS202A • WU25PD VDS202A12600 VDS202A12700
£ 63.24 63.24
VDS402A • WU25PD VDS402A12600 VDS402A12700
£ 97.82 97.82
D1 diameter mm in 12,600 .4961 12,700 .5000
VDS202A12800 VDS202A12900
63.24 63.24
VDS402A12800 VDS402A12900
97.82 97.82
12,800 12,900
VDS202A13000 VDS202A13096
63.24 65.25
VDS402A13000 VDS402A13096
97.82 101.29
VDS202A13100 VDS202A13200
65.25 65.25
VDS402A13100 VDS402A13200
VDS202A13300 VDS202A13400
65.25 65.25
VDS202A13500 VDS202A13600
L4 max 60 60
L5 2,2 2,2
L 124 124
LS 45 45
D 14 14
.5039 .5079
60 60
2,2 2,2
124 124
45 45
14 14
13,000 13,096
.5118 .5156
60 60
2,2 2,3
124 124
45 45
14 14
101.29 101.29
13,100 13,200
.5157 .5197
60 60
2,3 2,3
124 124
45 45
14 14
VDS402A13300 VDS402A13400
101.29 101.29
13,300 13,400
.5236 .5276
60 60
2,3 2,3
124 124
45 45
14 14
65.25 65.25
VDS402A13500 VDS402A13600
101.29 101.29
13,500 13,600
.5315 .5354
60 60
2,3 2,3
124 124
45 45
14 14
VDS202A13700 VDS202A13800
65.25 65.25
VDS402A13700 VDS402A13800
101.29 101.29
13,700 13,800
.5394 .5433
60 60
2,4 2,4
124 124
45 45
14 14
VDS202A13891 VDS202A13900
65.25 65.25
VDS402A13891 VDS402A13900
101.29 101.29
13,891 13,900
.5469 .5472
60 60
2,4 2,4
124 124
45 45
14 14
VDS202A14000 VDS202A14100
65.25 75.18
VDS402A14000 VDS402A14100
101.29 117.08
14,000 14,100
.5512 .5551
60 63
2,4 2,4
124 133
45 48
14 16
VDS202A14200 VDS202A14288
75.18 75.18
VDS402A14200 VDS402A14288
117.08 117.08
14,200 14,288
.5591 .5625
63 63
2,5 2,5
133 133
48 48
16 16
VDS202A14300 VDS202A14400
75.18 75.18
VDS402A14300 VDS402A14400
117.08 117.08
14,300 14,400
.5630 .5669
63 63
2,5 2,5
133 133
48 48
16 16
VDS202A14500 VDS202A14600
75.18 75.18
VDS402A14500 VDS402A14600
117.08 117.08
14,500 14,600
.5709 .5748
63 63
2,5 2,5
133 133
48 48
16 16
VDS202A14684 VDS202A14700
75.18 75.18
VDS402A14684 VDS402A14700
117.08 117.08
14,684 14,700
.5781 .5787
63 63
2,5 2,5
133 133
48 48
16 16
VDS202A14800 VDS202A14900
75.18 75.18
VDS402A14800 VDS402A14900
117.08 117.08
14,800 14,900
.5827 .5866
63 63
2,6 2,6
133 133
48 48
16 16
VDS202A15000 VDS202A15083
75.18 85.50
VDS402A15000 VDS402A15083
117.08 131.71
15,000 15,083
.5906 .5938
63 63
2,6 2,6
133 133
48 48
16 16
VDS202A15100 VDS202A15200
85.50 85.50
VDS402A15100 VDS402A15200
131.71 131.71
15,100 15,200
.5945 .5984
63 63
2,6 2,6
133 133
48 48
16 16
VDS202A15300 VDS202A15400
85.50 85.50
VDS402A15300 VDS402A15400
131.71 131.71
15,300 15,400
.6024 .6063
63 63
2,6 2,7
133 133
48 48
16 16
VDS202A15479 VDS202A15500
85.50 85.50
VDS402A15479 VDS402A15500
131.71 131.71
15,479 15,500
.6094 .6102
63 63
2,7 2,7
133 133
48 48
16 16
VDS202A15600 VDS202A15700
85.50 85.50
VDS402A15600 VDS402A15700
131.71 131.71
15,600 15,700
.6142 .6181
63 63
2,7 2,7
133 133
48 48
16 16
VDS202A15800 VDS202A15875
85.50 85.50
VDS402A15800 VDS402A15875
131.71 131.71
15,800 15,875
.6220 .6250
63 63
2,7 2,7
133 133
48 48
16 16
VDS202A15900 VDS202A16000
85.50 85.50
VDS402A15900 VDS402A16000
131.71 131.71
15,900 16,000
.6260 .6299
63 63
2,8 2,8
133 133
48 48
16 16
VDS202A16100 VDS202A16200
98.98 98.98
VDS402A16100 VDS402A16200
154.05 154.05
16,100 16,200
.6339 .6378
71 71
2,8 2,8
143 143
48 48
18 18
VDS202A16271 VDS202A16300
98.98 98.98
VDS402A16271 VDS402A16300
154.05 154.05
16,271 16,300
.6406 .6417
71 71
2,8 2,8
143 143
48 48
18 18
(continued)
50
WID_Slimline_ITC_Issue_7_Bro_46-51.indd 50
widia.com
1/7/20 8:40 AM
Solid Carbide Drills VariDrill • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D ™
(VDS202A/VDS402A • 5 x D continued)
VDS202A • WU25PD VDS202A16400 VDS202A16500
£ 98.98 98.98
VDS402A • WU25PD VDS402A16400 VDS402A16500
£ 154.05 154.05
D1 diameter mm in 16,400 .6457 16,500 .6496
VDS202A16600 VDS202A16670
98.98 98.98
VDS402A16600 VDS402A16670
154.05 154.05
16,600 16,670
VDS202A16700 VDS202A16800
98.98 98.98
VDS402A16700 VDS402A16800
154.05 154.05
VDS202A16900 VDS202A17000
98.98 98.98
VDS402A16900 VDS402A17000
VDS202A17100 VDS202A17200
119.78 119.78
VDS202A17300 VDS202A17400
L4 max 71 71
L5 2,8 2,9
L 143 143
LS 48 48
D 18 18
.6535 .6563
71 71
2,9 2,9
143 143
48 48
18 18
16,700 16,800
.6575 .6614
71 71
2,9 2,9
143 143
48 48
18 18
154.05 154.05
16,900 17,000
.6654 .6693
71 71
2,9 2,9
143 143
48 48
18 18
VDS402A17100 VDS402A17200
185.25 185.25
17,100 17,200
.6732 .6772
71 71
3,0 3,0
143 143
48 48
18 18
119.78 119.78
VDS402A17300 VDS402A17400
185.25 185.25
17,300 17,400
.6811 .6850
71 71
3,0 3,0
143 143
48 48
18 18
VDS202A17463 VDS202A17500
119.78 119.78
VDS402A17463 VDS402A17500
185.25 185.25
17,463 17,500
.6875 .6890
71 71
3,0 3,0
143 143
48 48
18 18
VDS202A17600 VDS202A17700
119.78 119.78
VDS402A17600 VDS402A17700
185.25 185.25
17,600 17,700
.6929 .6969
71 71
3,1 3,1
143 143
48 48
18 18
VDS202A17800 VDS202A17859
119.78 119.78
VDS402A17800 VDS402A17859
185.25 185.25
17,800 17,859
.7008 .7031
71 71
3,1 3,1
143 143
48 48
18 18
VDS202A17900 VDS202A18000
119.78 119.78
VDS402A17900 VDS402A18000
185.25 185.25
17,900 18,000
.7047 .7087
71 71
3,1 3,1
143 143
48 48
18 18
VDS202A18100 VDS202A18200
129.79 129.79
VDS402A18100 VDS402A18200
194.87 194.87
18,100 18,200
.7126 .7165
77 77
3,1 3,2
153 153
50 50
20 20
VDS202A18258 VDS202A18300
129.79 129.79
VDS402A18258 VDS402A18300
194.87 194.87
18,258 18,300
.7188 .7205
77 77
3,2 3,2
153 153
50 50
20 20
VDS202A18400 VDS202A18500
129.79 129.79
VDS402A18400 VDS402A18500
194.87 194.87
18,400 18,500
.7244 .7283
77 77
3,2 3,2
153 153
50 50
20 20
VDS202A18600 VDS202A18654
129.79 129.79
VDS402A18600 VDS402A18654
194.87 194.87
18,600 18,654
.7323 .7344
77 77
3,2 3,2
153 153
50 50
20 20
VDS202A18700 VDS202A18800
129.79 129.79
VDS402A18700 VDS402A18800
194.87 194.87
18,700 18,800
.7362 .7402
77 77
3,2 3,3
153 153
50 50
20 20
VDS202A18900 VDS202A19000
129.79 129.79
VDS402A18900 VDS402A19000
194.87 194.87
18,900 19,000
.7441 .7480
77 77
3,3 3,3
153 153
50 50
20 20
VDS202A19050 VDS202A19100
139.81 139.81
VDS402A19050 VDS402A19100
216.06 216.06
19,050 19,100
.7500 .7520
77 77
3,3 3,3
153 153
50 50
20 20
VDS202A19200 VDS202A19300
139.81 139.81
VDS402A19200 VDS402A19300
216.06 216.06
19,200 19,300
.7559 .7598
77 77
3,3 3,4
153 153
50 50
20 20
VDS202A19400 VDS202A19500
139.81 139.81
VDS402A19400 VDS402A19500
216.06 216.06
19,400 19,500
.7638 .7677
77 77
3,4 3,4
153 153
50 50
20 20
VDS202A19600 VDS202A19700
139.81 139.81
VDS402A19600 VDS402A19700
216.06 216.06
19,600 19,700
.7717 .7756
77 77
3,4 3,4
153 153
50 50
20 20
VDS202A19800 VDS202A19900
139.81 139.81
VDS402A19800 VDS402A19900
216.06 216.06
19,800 19,900
.7795 .7835
77 77
3,4 3,5
153 153
50 50
20 20
VDS202A20000
139.81
VDS402A20000
216.06
20,000
.7874
77
3,5
153
50
20
NOTE: L4 max, L5, L, LS, and D table columns reflect millimetre measurements.
widia.com
WID_Slimline_ITC_Issue_7_Bro_46-51.indd 51
51
1/7/20 8:40 AM
Solid Carbide Drills VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D
nVDS403A • 8 x D
D1 diameter VDS403A • WU25PD VDS403A01500 VDS403A01600
£ 60.70 60.70
VDS403A01700 VDS403A01800
60.70 60.70
VDS403A01900 VDS403A01984
60.70 60.70
VDS403A02000 VDS403A02100
60.70 61.70
VDS403A02200 VDS403A02300
61.70 61.70
VDS403A02383 VDS403A02400
61.70 61.70
VDS403A02439 VDS403A02489
61.70 61.70
VDS403A02500 VDS403A02578
61.70 61.70
VDS403A02600 VDS403A02642
61.70 61.70
VDS403A02700 VDS403A02705
61.70 61.70
VDS403A02779 VDS403A02800
61.70 61.70
VDS403A02820 VDS403A02870
61.70 61.70
VDS403A02900 VDS403A02947
61.70 61.70
VDS403A03000 VDS403A03048
61.70 62.78
VDS403A03100 VDS403A03175
62.78 62.78
VDS403A03200 VDS403A03264
62.78 62.78
VDS403A03300 VDS403A03400
62.78 62.78
VDS403A03455 VDS403A03500
62.78 62.78
VDS403A03571 VDS403A03600
62.78 62.78
VDS403A03658 VDS403A03700
62.78 62.78
mm 1,500 1,600
in .0591 .0630
1,700 1,800
.0669 .0709
1,900 1,984
.0748 .0781
2,000 2,100
.0787 .0827
2,200 2,300
.0866 .0906
2,383 2,400
.0938 .0945
2,439 2,489
.0960 .0980
2,500 2,578
.0984 .1015
2,600 2,642
.1024 .1040
2,700 2,705
.1063 .1065
2,779 2,800
.1094 .1102
2,820 2,870
.1110 .1130
2,900 2,947
.1142 .1160
3,000 3,048
.1181 .1200
3,100 3,175
.1220 .1250
3,200 3,264
.1260 .1285
3,300 3,400
.1299 .1339
3,455 3,500
.1360 .1378
3,571 3,600
.1406 .1417
3,658 3,700
.1440 .1457
L 58 58
58 58
L4 max 15 15
L5 0,2 0,2
LS 28 28
15 15
0,3 0,3
28 28
15 22
0,3 0,3
28 28
22 22
0,3 0,3
28 28
22 22
0,3 0,4
28 28
25 25
0,4 0,4
28 28
25 25
0,4 0,4
28 28
25 25
0,4 0,4
28 28
25 25
0,4 0,4
28 28
25 25
0,4 0,4
28 28
25 25
0,4 0,5
28 28
25 25
0,5 0,5
28 28
25 25
0,5 0,5
28 28
33 33
0,5 0,5
36 36
33 33
0,5 0,5
36 36
33 33
0,5 0,5
36 36
33 33
0,5 0,6
36 36
33 33
0,6 0,6
36 36
33 33
0,6 0,6
36 36
33 33
0,6 0,6
36 36
58 66
66 66
66 66
66 66
66 66
66 66
66 66
66 66
66 66
66 66
66 66
78 78
78 78
78 78
78 78
78 78
78 78
78 78
D 4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
6 6
6 6
6 6
6 6
6 6
6 6
6 6
(continued)
52
WID_Slimline_ITC_Issue_7_Bro_52-60.indd 52
widia.com
1/7/20 8:42 AM
Solid Carbide Drills VariDrill • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D ™
(VDS403A • 8 x D continued)
D1 diameter VDS403A • WU25PD VDS403A03734 VDS403A03800
£ 62.78 62.78
VDS403A03900 VDS403A03970
62.78 62.78
VDS403A04000 VDS403A04039
62.78 65.09
VDS403A04090 VDS403A04100
65.09 65.09
VDS403A04200 VDS403A04217
65.09 65.09
VDS403A04300 VDS403A04366
65.09 65.09
VDS403A04400 VDS403A04500
65.09 65.09
VDS403A04600 VDS403A04623
65.09 65.09
VDS403A04700 VDS403A04763
65.09 65.09
VDS403A04800 VDS403A04852
65.09 65.09
VDS403A04900 VDS403A05000
65.09 65.09
VDS403A05100 VDS403A05106
66.32 66.32
VDS403A05159 VDS403A05200
66.32 66.32
VDS403A05300 VDS403A05400
66.32 66.32
VDS403A05410 VDS403A05500
66.32 66.32
VDS403A05558 VDS403A05600
66.32 66.32
VDS403A05616 VDS403A05700
66.32 66.32
VDS403A05800 VDS403A05900
66.32 66.32
VDS403A05954 VDS403A06000
66.32 66.32
VDS403A06100 VDS403A06200
72.18 72.18
VDS403A06300 VDS403A06350
72.18 72.18
VDS403A06400 VDS403A06500
72.18 72.18
mm 3,734 3,800
in .1470 .1496
3,900 3,970
.1535 .1563
4,000 4,039
.1575 .1590
4,090 4,100
.1610 .1614
4,200 4,217
.1654 .1660
4,300 4,366
.1693 .1719
4,400 4,500
.1732 .1772
4,600 4,623
.1811 .1820
4,700 4,763
.1850 .1875
4,800 4,852
.1890 .1910
4,900 5,000
.1929 .1969
5,100 5,106
.2008 .2010
5,159 5,200
.2031 .2047
5,300 5,400
.2087 .2126
5,410 5,500
.2130 .2165
5,558 5,600
.2188 .2205
5,616 5,700
.2211 .2244
5,800 5,900
.2283 .2323
5,954 6,000
.2344 .2362
6,100 6,200
.2402 .2441
105 105
6,300 6,350
.2480 .2500
105 105
6,400 6,500
.2520 .2559
105 105
L 78 87
87 87
L4 max 33 41
L5 0,6 0,6
LS 36 36
41 41
0,6 0,7
36 36
41 41
0,7 0,7
36 36
41 41
0,7 0,7
36 36
41 41
0,7 0,7
36 36
41 41
0,7 0,7
36 36
41 41
0,7 0,7
36 36
41 41
0,8 0,8
36 36
41 48
0,8 0,8
36 36
48 48
0,8 0,8
36 36
48 48
0,8 0,8
36 36
48 48
0,8 0,8
36 36
48 48
0,9 0,9
36 36
48 48
0,9 0,9
36 36
48 48
0,9 0,9
36 36
48 48
0,9 0,9
36 36
48 48
0,9 1,0
36 36
48 48
1,0 1,0
36 36
48 48
1,0 1,0
36 36
57 57
1,0 1,0
36 36
57 57
1,1 1,1
36 36
57 57
1,1 1,1
36 36
87 87
87 87
87 87
87 87
87 87
87 87
87 94
94 94
94 94
94 94
94 94
94 94
94 94
94 94
94 94
94 94
94 94
D 6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
8 8
8 8
8 8
(continued)
widia.com
WID_Slimline_ITC_Issue_7_Bro_52-60.indd 53
53
1/7/20 8:42 AM
Solid Carbide Drills VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D (VDS403A • 8 x D continued)
D1 diameter VDS403A • WU25PD VDS403A06528 VDS403A06600
£ 72.18 72.18
VDS403A06630 VDS403A06700
72.18 72.18
VDS403A06746 VDS403A06800
72.18 72.18
VDS403A06900 VDS403A07000
72.18 72.18
VDS403A07100 VDS403A07145
77.42 77.42
VDS403A07200 VDS403A07300
77.42 77.42
VDS403A07400 VDS403A07500
77.42 77.42
VDS403A07541 VDS403A07600
77.42 77.42
VDS403A07700 VDS403A07800
77.42 77.42
VDS403A07900 VDS403A07938
77.42 77.42
VDS403A08000 VDS403A08100
77.42 84.35
VDS403A08200 VDS403A08300
84.35 84.35
VDS403A08334 VDS403A08400
84.35 84.35
VDS403A08433 VDS403A08500
84.35 84.35
VDS403A08600 VDS403A08700
84.35 84.35
VDS403A08733 VDS403A08800
84.35 84.35
VDS403A08900 VDS403A09000
84.35 84.35
VDS403A09100 VDS403A09129
95.90 95.90
VDS403A09200 VDS403A09300
95.90 95.90
VDS403A09347 VDS403A09400
95.90 95.90
VDS403A09500 VDS403A09525
95.90 95.90
VDS403A09600 VDS403A09700
95.90 95.90
VDS403A09800 VDS403A09900
95.90 95.90
mm 6,528 6,600
in .2570 .2598
L 105 105
6,630 6,700
.2610 .2638
105 105
6,746 6,800
.2656 .2677
105 105
6,900 7,000
.2717 .2756
105 105
7,100 7,145
.2795 .2813
110 110
7,200 7,300
.2835 .2874
110 110
7,400 7,500
.2913 .2953
110 110
7,541 7,600
.2969 .2992
110 110
7,700 7,800
.3031 .3071
110 110
7,900 7,938
.3110 .3125
110 110
8,000 8,100
.3150 .3189
110 122
8,200 8,300
.3228 .3268
122 122
8,334 8,400
.3281 .3307
122 122
8,433 8,500
.3320 .3346
122 122
8,600 8,700
.3386 .3425
122 122
8,733 8,800
.3438 .3465
122 122
8,900 9,000
.3504 .3543
122 122
9,100 9,129
.3583 .3594
122 122
9,200 9,300
.3622 .3661
122 122
9,347 9,400
.3680 .3701
122 122
9,500 9,525
.3740 .3750
122 122
9,600 9,700
.3780 .3819
122 122
9,800 9,900
.3858 .3898
122 122
L4 max 57 57
L5 1,1 1,1
LS 36 36
57 57
1,1 1,1
36 36
57 57
1,1 1,1
36 36
57 57
1,2 1,2
36 36
61 61
1,2 1,2
36 36
61 61
1,2 1,2
36 36
61 61
1,3 1,3
36 36
61 61
1,3 1,3
36 36
61 61
1,3 1,3
36 36
61 61
1,3 1,3
36 36
61 68
1,4 1,4
36 40
8 10
68 68
1,4 1,4
40 40
10 10
68 68
1,4 1,4
40 40
10 10
68 68
1,4 1,4
40 40
10 10
68 68
1,5 1,5
40 40
10 10
68 68
1,5 1,5
40 40
10 10
68 68
1,5 1,5
40 40
10 10
68 68
1,5 1,6
40 40
10 10
68 68
1,6 1,6
40 40
10 10
68 68
1,6 1,6
40 40
10 10
68 68
1,6 1,6
40 40
10 10
68 68
1,6 1,7
40 40
10 10
68 68
1,7 1,7
40 40
10 10
D 8 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
(continued)
54
WID_Slimline_ITC_Issue_7_Bro_52-60.indd 54
widia.com
1/7/20 8:42 AM
Solid Carbide Drills VariDrill • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D ™
(VDS403A • 8 x D continued)
D1 diameter VDS403A • WU25PD VDS403A09921 VDS403A10000
£ 95.90 95.90
mm 9,921 10,000
in .3906 .3937
L 122 122
VDS403A10100 VDS403A10200
111.69 111.69
10,100 10,200
.3976 .4016
141 141
VDS403A10300 VDS403A10320
111.69 111.69
10,300 10,320
.4055 .4063
141 141
VDS403A10400 VDS403A10500
111.69 111.69
10,400 10,500
.4094 .4134
141 141
VDS403A10600 VDS403A10700
111.69 111.69
10,600 10,700
.4173 .4213
141 141
VDS403A10716 VDS403A10800
111.69 111.69
10,716 10,800
.4219 .4252
141 141
VDS403A10900 VDS403A11000
111.69 111.69
10,900 11,000
.4291 .4331
141 141
VDS403A11100 VDS403A11113
116.70 116.70
11,100 11,113
.4370 .4375
141 141
VDS403A11200 VDS403A11300
116.70 116.70
11,200 11,300
.4409 .4449
141 141
VDS403A11400 VDS403A11500
116.70 116.70
11,400 11,500
.4488 .4528
141 141
VDS403A11509 VDS403A11600
116.70 116.70
11,509 11,600
.4531 .4567
141 141
VDS403A11700 VDS403A11800
116.70 116.70
11,700 11,800
.4606 .4646
141 141
VDS403A11900 VDS403A11908
116.70 116.70
11,900 11,908
.4685 .4688
141 141
VDS403A12000 VDS403A12100
116.70 157.13
12,000 12,100
.4724 .4764
141 155
VDS403A12200 VDS403A12300
157.13 157.13
12,200 12,300
.4803 .4843
155 155
VDS403A12304 VDS403A12400
157.13 157.13
12,304 12,400
.4844 .4882
155 155
VDS403A12500 VDS403A12600
157.13 157.13
12,500 12,600
.4921 .4961
155 155
VDS403A12700 VDS403A12800
157.13 157.13
12,700 12,800
.5000 .5039
155 155
VDS403A12900 VDS403A13000
157.13 157.13
12,900 13,000
.5079 .5118
155 155
VDS403A13096 VDS403A13100
161.75 161.75
13,096 13,100
.5156 .5157
155 155
VDS403A13200 VDS403A13300
161.75 161.75
13,200 13,300
.5197 .5236
155 155
VDS403A13400 VDS403A13500
161.75 161.75
13,400 13,500
.5276 .5315
155 155
VDS403A13600 VDS403A13700
161.75 161.75
13,600 13,700
.5354 .5394
155 155
L4 max 68 68
L5 1,7 1,7
LS 40 40
D 10 10
79 79
1,7 1,7
45 45
12 12
79 79
1,8 1,8
45 45
12 12
79 79
1,8 1,8
45 45
12 12
79 79
1,8 1,8
45 45
12 12
79 79
1,8 1,8
45 45
12 12
79 79
1,9 1,9
45 45
12 12
79 79
1,9 1,9
45 45
12 12
79 79
1,9 1,9
45 45
12 12
79 79
2,0 2,0
45 45
12 12
79 79
2,0 2,0
45 45
12 12
79 79
2,0 2,0
45 45
12 12
79 79
2,0 2,0
45 45
12 12
79 91
2,1 2,1
45 45
12 14
91 91
2,1 2,1
45 45
14 14
91 91
2,1 2,1
45 45
14 14
91 91
2,1 2,2
45 45
14 14
91 91
2,2 2,2
45 45
14 14
91 91
2,2 2,2
45 45
14 14
91 91
2,3 2,3
45 45
14 14
91 91
2,3 2,3
45 45
14 14
91 91
2,3 2,3
45 45
14 14
91 91
2,3 2,4
45 45
14 14
(continued)
widia.com
WID_Slimline_ITC_Issue_7_Bro_52-60.indd 55
55
1/7/20 8:42 AM
Solid Carbide Drills VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D (VDS403A • 8 x D continued)
VDS403A • WU25PD VDS403A13800 VDS403A13891
£ 161.75 161.75
D1 diameter mm in 13,800 .5433 13,891 .5469
L 155 155
VDS403A13900 VDS403A14000
161.75 161.75
13,900 14,000
.5472 .5512
155 155
VDS403A14100 VDS403A14200
181.40 181.40
14,100 14,200
.5551 .5591
VDS403A14288 VDS403A14300
181.40 181.40
14,288 14,300
VDS403A14400 VDS403A14500
181.40 181.40
VDS403A14600 VDS403A14684
L4 max 91 91
L5 2,4 2,4
LS 45 45
D 14 14
91 91
2,4 2,4
45 45
14 14
171 171
101 101
2,4 2,5
48 48
16 16
.5625 .5630
171 171
101 101
2,5 2,5
48 48
16 16
14,400 14,500
.5669 .5709
171 171
101 101
2,5 2,5
48 48
16 16
181.40 181.40
14,600 14,684
.5748 .5781
171 171
101 101
2,5 2,5
48 48
16 16
VDS403A14700 VDS403A14800
181.40 181.40
14,700 14,800
.5787 .5827
171 171
101 101
2,5 2,6
48 48
16 16
VDS403A14900 VDS403A15000
181.40 181.40
14,900 15,000
.5866 .5906
171 171
101 101
2,6 2,6
48 48
16 16
VDS403A15083 VDS403A15100
211.82 211.82
15,083 15,100
.5938 .5945
171 171
101 101
2,6 2,6
48 48
16 16
VDS403A15200 VDS403A15300
211.82 211.82
15,200 15,300
.5984 .6024
171 171
101 101
2,6 2,6
48 48
16 16
VDS403A15400 VDS403A15479
211.82 211.82
15,400 15,479
.6063 .6094
171 171
101 101
2,7 2,7
48 48
16 16
VDS403A15500 VDS403A15600
211.82 211.82
15,500 15,600
.6102 .6142
171 171
101 101
2,7 2,7
48 48
16 16
VDS403A15700 VDS403A15800
211.82 211.82
15,700 15,800
.6181 .6220
171 171
101 101
2,7 2,7
48 48
16 16
VDS403A15875 VDS403A15900
211.82 211.82
15,875 15,900
.6250 .6260
171 171
101 101
2,7 2,8
48 48
16 16
VDS403A16000 VDS403A16100
211.82 246.48
16,000 16,100
.6299 .6339
171 185
101 113
2,8 2,8
48 48
16 18
VDS403A16200 VDS403A16271
246.48 246.48
16,200 16,271
.6378 .6406
185 185
113 113
2,8 2,8
48 48
18 18
VDS403A16300 VDS403A16400
246.48 246.48
16,300 16,400
.6417 .6457
185 185
113 113
2,8 2,8
48 48
18 18
VDS403A16500 VDS403A16600
246.48 246.48
16,500 16,600
.6496 .6535
185 185
113 113
2,9 2,9
48 48
18 18
VDS403A16670 VDS403A16700
246.48 246.48
16,670 16,700
.6563 .6575
185 185
113 113
2,9 2,9
48 48
18 18
VDS403A16800 VDS403A16900
246.48 246.48
16,800 16,900
.6614 .6654
185 185
113 113
2,9 2,9
48 48
18 18
VDS403A17000 VDS403A17100
246.48 296.17
17,000 17,100
.6693 .6732
185 185
113 113
2,9 3,0
48 48
18 18
VDS403A17200 VDS403A17300
296.17 296.17
17,200 17,300
.6772 .6811
185 185
113 113
3,0 3,0
48 48
18 18
VDS403A17400 VDS403A17463
296.17 296.17
17,400 17,463
.6850 .6875
185 185
113 113
3,0 3,0
48 48
18 18
(continued)
56
WID_Slimline_ITC_Issue_7_Bro_52-60.indd 56
widia.com
1/7/20 8:42 AM
Solid Carbide Drills VariDrill • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D ™
(VDS403A • 8 x D continued)
VDS403A • WU25PD VDS403A17500 VDS403A17600
£ 296.17 296.17
D1 diameter mm in 17,500 .6890 17,600 .6929
L 185 185
L4 max 113 113
L5 3,0 3,1
LS 48 48
D 18 18
VDS403A17700 VDS403A17800
296.17 296.17
17,700 17,800
.6969 .7008
185 185
113 113
3,1 3,1
48 48
18 18
VDS403A17859 VDS403A17900
296.17 296.17
17,859 17,900
.7031 .7047
185 185
113 113
3,1 3,1
48 48
18 18
VDS403A18000 VDS403A18100
296.17 321.19
18,000 18,100
.7087 .7126
185 200
113 124
3,1 3,1
48 50
18 20
VDS403A18200 VDS403A18258
321.19 321.19
18,200 18,258
.7165 .7188
200 200
124 124
3,2 3,2
50 50
20 20
VDS403A18300 VDS403A18400
321.19 321.19
18,300 18,400
.7205 .7244
200 200
124 124
3,2 3,2
50 50
20 20
VDS403A18500 VDS403A18600
321.19 321.19
18,500 18,600
.7283 .7323
200 200
124 124
3,2 3,2
50 50
20 20
VDS403A18654 VDS403A18700
321.19 321.19
18,654 18,700
.7344 .7362
200 200
124 124
3,2 3,2
50 50
20 20
VDS403A18800 VDS403A18900
321.19 321.19
18,800 18,900
.7402 .7441
200 200
124 124
3,3 3,3
50 50
20 20
VDS403A19000 VDS403A19050
321.19 345.84
19,000 19,050
.7480 .7500
200 200
124 124
3,3 3,3
50 50
20 20
VDS403A19100 VDS403A19200
345.84 345.84
19,100 19,200
.7520 .7559
200 200
124 124
3,3 3,3
50 50
20 20
VDS403A19300 VDS403A19400
345.84 345.84
19,300 19,400
.7598 .7638
200 200
124 124
3,4 3,4
50 50
20 20
VDS403A19500 VDS403A19600
345.84 345.84
19,500 19,600
.7677 .7717
200 200
124 124
3,4 3,4
50 50
20 20
VDS403A19700 VDS403A19800
345.84 345.84
19,700 19,800
.7756 .7795
200 200
124 124
3,4 3,4
50 50
20 20
VDS403A19900 VDS403A20000
345.84 345.84
19,900 20,000
.7835 .7874
200 200
124 124
3,5 3,5
50 50
20 20
NOTE: L4 max, L5, L, LS, and D table columns reflect millimetre measurements.
Tolerance Nominal Size Range
D1 Tolerance
D Tolerance h6
1–3
0,000/-0,014 (h8)
0,000/-0,006
>3–6
0,000/-0,012 (h7)
0,000/-0,008
>6–10
0,000/-0,015 (h7)
0,000/-0,009
>10–18 >18–20
0,000/-0,018 (h7) 0,000/-0,021 (h7)
0,000/-0,011 0,000/-0,013
widia.com
WID_Slimline_ITC_Issue_7_Bro_52-60.indd 57
57
1/7/20 8:42 AM
Solid Carbide Drills VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • Speed and Feed Charts VariDrill • VDS2_ Series • WU25PD • Flood Coolant • Metric
Cutting Speed — vc Range — m/min
P
M
K
N
S
Group 1 2, 3, 4, 6, 7 5, 9, 10, 11 12, 13 14.1 14.3 14.2, 14.4 15, 16 17, 18, 19 20 21 22, 23, 24 25 26, 27, 28 31, 32 33, 34, 35 36 37
min 60 50 50 30 30 40 30 70 90 80 90 90 90 90 20 10 20 20
– – – – – – – – – – – – – – – – – –
max 100 90 100 60 50 60 50 150 120 120 270 270 225 270 30 30 40 50
Recommended Feed Rate (fz) Tool Diameter mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r
1,0 0,04 – 0,09 0,05 – 0,10 0,05 – 0,10 0,03 – 0,05 0,02 – 0,05 0,02 – 0,06 0,02 – 0,05 0,06 – 0,13 0,08 – 0,11 0,04 – 0,10 0,05 – 0,12 0,04 – 0,08 0,10 – 0,13 0,04 – 0,08 0,01 – 0,04 0,01 – 0,03 0,01 – 0,03 0,01 – 0,03
2,0 0,05 – 0,12 0,06 – 0,13 0,06 – 0,13 0,04 – 0,06 0,03 – 0,06 0,03 – 0,07 0,03 – 0,06 0,07 – 0,14 0,09 – 0,12 0,06 – 0,12 0,06 – 0,13 0,06 – 0,12 0,11 – 0,14 0,06 – 0,12 0,02 – 0,05 0,02 – 0,03 0,02 – 0,03 0,02 – 0,03
3,0 0,07 – 0,14 0,08 – 0,15 0,07 – 0,15 0,05 – 0,08 0,04 – 0,07 0,04 – 0,08 0,04 – 0,07 0,09 – 0,18 0,10 – 0,13 0,06 – 0,14 0,08 – 0,14 0,08 – 0,16 0,12 – 0,14 0,08 – 0,16 0,03 – 0,06 0,02 – 0,04 0,02 – 0,04 0,02 – 0,04
4,0 0,08 – 0,16 0,09 – 0,17 0,08 – 0,17 0,06 – 0,10 0,05 – 0,09 0,06 – 0,10 0,06 – 0,09 0,10 – 0,19 0,10 – 0,15 0,07 – 0,15 0,10 – 0,16 0,10 – 0,20 0,13 – 0,16 0,10 – 0,20 0,04 – 0,08 0,03 – 0,06 0,02 – 0,05 0,03 – 0,06
6,0 0,11 – 0,22 0,13 – 0,23 0,12 – 0,23 0,08 – 0,14 0,08 – 0,11 0,08 – 0,12 0,08 – 0,11 0,13 – 0,25 0,13 – 0,20 0,10 – 0,20 0,12 – 0,20 0,12 – 0,24 0,14 – 0,20 0,12 – 0,24 0,06 – 0,10 0,05 – 0,08 0,04 – 0,07 0,05 – 0,08
8,0 0,13 – 0,26 0,15 – 0,28 0,14 – 0,28 0,10 – 0,18 0,09 – 0,12 0,09 – 0,14 0,09 – 0,12 0,16 – 0,30 0,16 – 0,25 0,11 – 0,24 0,16 – 0,24 0,16 – 0,28 0,16 – 0,24 0,16 – 0,28 0,08 – 0,12 0,07 – 0,10 0,06 – 0,09 0,07 – 0,10
10,0 0,15 – 0,31 0,19 – 0,33 0,17 – 0,33 0,13 – 0,22 0,10 – 0,14 0,10 – 0,16 0,10 – 0,14 0,18 – 0,35 0,18 – 0,29 0,14 – 0,28 0,20 – 0,28 0,20 – 0,32 0,20 – 0,28 0,20 – 0,32 0,09 – 0,13 0,08 – 0,11 0,07 – 0,10 0,08 – 0,11
12,0 0,18 – 0,35 0,22 – 0,38 0,19 – 0,38 0,14 – 0,24 0,12 – 0,16 0,12 – 0,18 0,12 – 0,16 0,20 – 0,39 0,20 – 0,32 0,15 – 0,32 0,24 – 0,32 0,24 – 0,36 0,24 – 0,32 0,24 – 0,36 0,10 – 0,14 0,09 – 0,12 0,08 – 0,11 0,09 – 0,12
16,0 0,22 – 0,42 0,26 – 0,47 0,23 – 0,47 0,18 – 0,32 0,14 – 0,18 0,14 – 0,20 0,14 – 0,18 0,25 – 0,48 0,25 – 0,38 0,19 – 0,38 0,28 – 0,40 0,28 – 0,44 0,28 – 0,40 0,28 – 0,40 0,12 – 0,16 0,10 – 0,14 0,09 – 0,13 0,10 – 0,14
20,0 0,28 – 0,54 0,34 – 0,59 0,29 – 0,59 0,23 – 0,41 0,16 – 0,20 0,16 – 0,22 0,16 – 0,20 0,30 – 0,59 0,30 – 0,48 0,24 – 0,48 0,32 – 0,48 0,32 – 0,52 0,32 – 0,44 0,32 – 0,48 0,14 – 0,18 0,11 – 0,16 0,10 – 0,15 0,11 – 0,16
10,0 0,15 – 0,31 0,19 – 0,33 0,17 – 0,33 0,13 – 0,22 0,10 – 0,14 0,10 – 0,16 0,10 – 0,14 0,21 – 0,40 0,21 – 0,32 0,15 – 0,32 0,20 – 0,28 0,20 – 0,32 0,20 – 0,28 0,20 – 0,32 0,09 – 0,13 0,08 – 0,11 0,07 – 0,10 0,08 – 0,11
12,0 0,18 – 0,35 0,22 – 0,38 0,19 – 0,38 0,14 – 0,24 0,12 – 0,16 0,12 – 0,18 0,12 – 0,16 0,23 – 0,44 0,23 – 0,36 0,17 – 0,36 0,24 – 0,32 0,24 – 0,36 0,24 – 0,32 0,24 – 0,36 0,10 – 0,14 0,09 – 0,12 0,08 – 0,11 0,09 – 0,12
16,0 0,22 – 0,42 0,26 – 0,47 0,23 – 0,47 0,18 – 0,32 0,14 – 0,18 0,14 – 0,20 0,14 – 0,18 0,28 – 0,54 0,28 – 0,43 0,22 – 0,43 0,28 – 0,40 0,28 – 0,44 0,28 – 0,40 0,28 – 0,40 0,12 – 0,16 0,10 – 0,14 0,09 – 0,13 0,10 – 0,14
20,0 0,28 – 0,54 0,34 – 0,59 0,29 – 0,59 0,23 – 0,41 0,16 – 0,20 0,16 – 0,22 0,16 – 0,20 0,34 – 0,67 0,34 – 0,54 0,27 – 0,54 0,32 – 0,48 0,32 – 0,52 0,32 – 0,44 0,32 – 0,48 0,14 – 0,18 0,11 – 0,16 0,10 – 0,15 0,11 – 0,16
VariDrill • VDS4_ Series • WU25PD • Through Coolant • Metric
Cutting Speed – vc Range – m/min
P
M
K
N
S
Group 1 2, 3, 4, 6, 7 5, 9, 10, 11 12, 13 14.1 14.3 14.2, 14.4 15, 16 17, 18, 19 20 21 22, 23, 24 25 26, 27, 28 31, 32 33, 34, 35 36 37
min 70 60 50 40 30 40 30 80 90 80 90 90 90 90 20 10 10 10
– – – – – – – – – – – – – – – – – –
max 140 100 100 70 50 60 50 160 140 130 315 270 270 270 30 30 40 40
58
WID_Slimline_ITC_Issue_7_Bro_52-60.indd 58
Recommended Feed Rate (fz) Tool Diameter mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r
1,0 0,04 – 0,09 0,05 – 0,10 0,05 – 0,10 0,03 – 0,05 0,02 – 0,05 0,02 – 0,06 0,02 – 0,05 0,07 – 0,14 0,09 – 0,13 0,05 – 0,12 0,05 – 0,12 0,04 – 0,08 0,10 – 0,13 0,04 – 0,08 0,01 – 0,04 0,01 – 0,03 0,01 – 0,03 0,01 – 0,03
2,0 0,05 – 0,12 0,06 – 0,13 0,06 – 0,13 0,04 – 0,06 0,03 – 0,06 0,03 – 0,07 0,03 – 0,06 0,08 – 0,15 0,10 – 0,14 0,06 – 0,14 0,06 – 0,13 0,06 – 0,12 0,11 – 0,14 0,06 – 0,12 0,02 – 0,05 0,02 – 0,03 0,02 – 0,03 0,02 – 0,03
3,0 0,07 – 0,14 0,08 – 0,15 0,07 – 0,15 0,05 – 0,08 0,04 – 0,07 0,04 – 0,08 0,04 – 0,07 0,10 – 0,20 0,11 – 0,14 0,07 – 0,15 0,08 – 0,14 0,08 – 0,16 0,12 – 0,14 0,08 – 0,16 0,03 – 0,06 0,02 – 0,04 0,02 – 0,04 0,02 – 0,04
4,0 0,08 – 0,16 0,09 – 0,17 0,08 – 0,17 0,06 – 0,10 0,05 – 0,09 0,06 – 0,10 0,06 – 0,09 0,11 – 0,22 0,12 – 0,17 0,08 – 0,17 0,10 – 0,16 0,10 – 0,20 0,13 – 0,16 0,10 – 0,20 0,04 – 0,08 0,03 – 0,06 0,02 – 0,05 0,03 – 0,06
6,0 0,11 – 0,22 0,13 – 0,23 0,12 – 0,23 0,08 – 0,14 0,08 – 0,11 0,08 – 0,12 0,08 – 0,11 0,14 – 0,28 0,14 – 0,23 0,11 – 0,23 0,12 – 0,20 0,12 – 0,24 0,14 – 0,20 0,12 – 0,24 0,06 – 0,10 0,05 – 0,08 0,04 – 0,07 0,05 – 0,08
8,0 0,13 – 0,26 0,15 – 0,28 0,14 – 0,28 0,10 – 0,18 0,09 – 0,12 0,09 – 0,14 0,09 – 0,12 0,18 – 0,34 0,18 – 0,28 0,13 – 0,27 0,16 – 0,24 0,16 – 0,28 0,16 – 0,24 0,16 – 0,28 0,08 – 0,12 0,07 – 0,10 0,06 – 0,09 0,07 – 0,10
widia.com
1/7/20 8:42 AM
Informational Icons Guide Application Icons Face Milling
Pocketing
Counter Sinking/ Stroke Chamfering
Drilling
Shoulder Milling: Square End
Shoulder Milling: Ball/Bull Nose
Reaming: Through Hole
Drilling: Inclined Entry
Ramping
Helical Milling
Reaming: Blind Hole
Drilling: Inclined Exit
3D Profiling
Slotting: Ball/Bull Nose
Reaming: Through and Cross Hole
Drilling: Stacked Plates
Slotting: Square End
Slotting: Side
Reaming: Blind and Cross Hole
Drilling: Convex
Slotting: T-Slot
Chamfer Milling
Geometry Icons Shank: Plain
Shank: SN Shank
Shank: Weldon: 2Flat
Shank: SK Shank (Rübig™)
Shank: Plain ≤H6
Shank: Shell Mill Shank
Shank: Flat
Shank: SSF Shank
Shank: SF Shank
Shank: Weldon®
Shank: Screw–On
Shank: KM™ Shank
Tool Dimensions: 2Flute/2Margin/ coolant
Tool Dimensions: 2Flute/4Margin/ no coolant
Through Coolant: Radial: Drilling
Through Coolant: Axial: Drilling
Tool Dimensions: 2Flute/4Margin/ coolant
DIN Number: 6537
Flood Coolant: Drilling
Feature Icons
DIN — German Institute for Standardisation
widia.com
WID_Slimline_ITC_Issue_7_Bro_52-60.indd 59
59
1/7/20 8:42 AM
Material Overview • DIN P M
K N
Steel Stainless Steel
S H
Cast Iron Non-Ferrous
High-Temp Alloys Hardened Materials
description
content
tensile strength RM (MPa)*
P0
Low-Carbon Steels, Long Chipping
C <0,25%
<530
<125
–
–
P1
Low-Carbon Steels, Short Chipping, Free Machining
C <0,25%
<530
<125
–
C15, Ck22, ST37-2, S235JR, 9SMnPb28, GS38
P2
Medium- and High-Carbon Steels
C >0,25%
>530
<220
<25
ST52, S355JR, C35, GS60, Cf53
P3
Alloy Steels and Tool Steels
C >0,25%
600–850
<330
<35
16MnCr5, Ck45, 21CrMoV5-7, 38SMn28
P4
Alloy Steels and Tool Steels
C >0,25%
850–1400
340–450
35–48
100Cr6, 30CrNiMo8, 42CrMo4, C70W2, S6525, X120Mn12
P5
Ferritic, Martensitic, and PH Stainless Steels
–
600–900
<330
<35
100Cr6, 30CrNiMo8, 42CrMo4, C70W2, S6525, X120Mn12
P6
High-Strength Ferritic, Martensitic, and PH Stainless Steels
–
900–1350
350–450
35–48
X102CrMo17, G-X120Cr29
M1
Austenitic Stainless Steel
–
<600
130–200
–
X5CrNi 18 10, X2CrNiMo 17 13 2, G-X25CrNiSi18 9, X15CrNiSi 20 12
M2
High-Strength Austenitic Stainless and Cast Stainless Steels
–
600–800
150–230
<25
X2CrNiMo 13 4, X5NiCr 32 21, X5CrNiNb 18 10, G-X15CrNi 25-20
M3
Duplex Stainless Steel
–
<800
135–275
<30
X8CrNiMo27 5, X2CrNiMoN22 5 3, X20CrNiSi25 4, G-X40CrNiSi27 4
K1
Grey Cast Iron
–
125–500
120–290
<32
GG15, GG25, GG30, GG40, GTW40
K2
Low- and Medium-Strength Ductile Irons (Nodular Irons) and Compacted Graphite Irons (CGI)
–
<600
130–260
<28
GGG40, GTS35
K3
High-Strength Ductile Irons and Austempered Ductile Iron (ADI)
–
>600
180–350
<43
GGG60, GTW55, GTS65
N1
Wrought Aluminium
–
–
–
–
AIMg1, AI99.5, AICuMg1, AICuBiPb, AIMgSi1, ALMgSiPb
N2
Low-Silicon Aluminium Alloys and Magnesium Alloys
Si <12,2%
–
–
–
GAISiCu4, GDAISi10Mg
N3
High-Silicon Aluminium Alloys and Magnesium Alloys
Si >12,2%
–
–
–
G-ALSi12, G-AlSi17Cu4, G-AISi21CuNiMg
N4
Copper-, Brass-, Zinc-Based on Machinability Index Range of 70–100
–
–
–
–
CuZn40, Ms60, G-CuSn5ZnPb, CuZn37, CuSi3Mn
N5
Nylon, Plastics, Rubbers, Phenolics, Resins, Fibreglass
–
–
–
–
Lexan®, Hostalen™, Polystyrol, Makrolon®
N6
Carbon, Graphite Composites, CFRP
–
–
–
–
CFK, GFK
N7
Metal Matrix Composites (MMC)
–
–
–
–
–
S1
Iron-Based, Heat-Resistant Alloys
–
500–1200
160–260
25–48
X1NiCrMoCu32 28 7, X12NiCrSi36 16, X5NiCrAITi31 20, X40CoCrNi20 20
S2
Cobalt-Based, Heat-Resistant Alloys
–
1000–1450
250–450
25–48
Haynes® 188, Stellite® 6,21,31
S3
Nickel-Based, Heat-Resistant Alloys
–
600–1700
160–450
<48
INCONEL® 690, INCONEL 625, Hastelloy®, NIMONIC® 75
S4
Titanium and Titanium Alloys
–
900–1600
300–400
33–48
Ti1, TiAI5Sn2, TiAI6V4, TiAI4Mo4Sn2
H1
Hardened Materials
–
–
–
44–48
GX260NiCr42, GX330NiCr42, GX300CrNiSi952, GX300CrMo153, Hardox® 400
H2
Hardened Materials
–
–
–
48–55
–
H3
Hardened Materials
–
–
–
56–60
–
H4
Hardened Materials
–
–
–
>60
–
material group
60
WID_Slimline_ITC_Issue_7_Bro_52-60.indd 60
hardness (HB)
hardness (HRC)
material number
widia.com
1/7/20 8:42 AM
I M P O R TA N T S A F E T Y I N S T R U C T I O N S : Read before using the tools in this catalogue
METALCUTTING SAFETY Projectile and Fragmentation Hazards
Breathing and Skin Contact Hazards
Modern metalcutting operations involve high spindle and cutter speeds and high temperatures and cutting forces. Hot metal chips may fly off the workpiece during metalcutting. Although cutting tools are designed and manufactured to withstand high cutting forces and temperatures, they can sometimes fragment, particularly if they are subjected to over-stress, severe impact, or other abuse.
Grinding carbide or other advanced cutting tool materials produces dust or mist containing metallic particles. Breathing this dust or mist — especially over an extended period — can cause temporary or permanent lung disease or make existing medical conditions worse. Contact with this dust or mist can irritate eyes, skin, and mucous membranes and may make existing skin conditions worse.
To avoid injury:
• Always wear breathing protection and safety goggles when grinding.
• Always wear appropriate personal protective equipment, including safety goggles, when operating metalcutting machines or working nearby.
• Provide ventilation control and collect and properly dispose of dust, mist, or sludge from grinding.
• Always make sure all machine guards are in place.
To avoid injury:
• Avoid skin contact with dust or mist.
For more information, read the applicable Material Safety Data Sheet provided by WIDIA and consult General Industry Safety and Health Regulations, Part 1910, Title 29 of the Code of Federal Regulations. These safety instructions are general guidelines. Many variables affect machining operations. It is impossible to cover every specific situation. The technical information included in this catalogue and recommendations on machining practices may not apply to your particular operation. For more information, consult WIDIA’s Metalcutting Safety booklet, available free from WIDIA at +1 724 539 5747 or fax +1 724 539 5439. For specific product safety and environmental questions, contact our Corporate Environmental Health and Safety Office at +1 724 539 5066 or fax +1 724 539 5372.
KM, NINA, TOP DRILL S, VariDrill, VariMill, VariMill I, VariMill II, VariMill III, Victory, WIDIA, WIDIA-Rübig, WK15PD, WP20PD, and WU25PD are trademarks of Kennametal, Inc. and are used as such herein. The absence of a product, service name, or logo from this list does not constitute a waiver of Kennametal’s trademark or other intellectual property rights concerning that name or logo. Weldon® is a registered trademark of Weldon Tool Company. ©Copyright 2020 by Kennametal Inc., Latrobe, PA 15650. All rights reserved.
_WID_Slimline_ITC_Issue_7_Bro_Covers.indd 4
1/7/20 10:38 AM
WORLD HE ADQUA RTERS
WIDIA Products Group Kennametal Inc. 1600 Technology Way Latrobe, PA 15650 USA Tel: 1 800 979 4342 w-na.service@widia.com EUROPE A N HE ADQUA RTERS
WIDIA Products Group Kennametal Europe GmbH Rheingoldstrasse 50 CH 8212 Neuhausen am Rheinfall Switzerland Tel: +41 52 6750 100 w-ch.service@widia.com ASIA-PACIFIC HE ADQUA RTERS
WIDIA Products Group Kennametal (Singapore) Pte. Ltd. 3A International Business Park Unit #01-02/03/05, ICON@IBP Singapore 609935 Tel: +65 6265 9222 w-sg.service@widia.com INDIA HE ADQUA RTERS
WIDIA Products Group REGD OFFICE: WIDIA India Tooling Pvt Ltd CIN: U28110KA2018PTC119396 Survey No 11 Nagasandra Adjacent to Nagasandra Metro Station Bengaluru-Pune National Highway Bengaluru-560073 India Tel: +91 80 2839 4321 w-in.service@widia.com
widia.com
Distributed by:
WIDIAâ&#x201E;¢ Slim Line ITC Ltd Cyber House, 1 Kepler, Lichfield Road Industrial Est, Tamworth B79 7XE Telephone: +44 (0) 1827 304500 Fax: +44 (0) 1827 304501 E-mail: sales@itc-ltd.co.uk www.itc-ltd.co.uk
ISSUE 7
Find us on:
2020 WIDIA Products Group l All rights reserved. l A-19-06192
_WID_Slimline_ITC_Issue_7_Bro_Covers.indd 1
1/7/20 10:37 AM