2018 ITAKAshop catalog - EN by ITAKAshop

CONTENTS 02

126

02 The ITAKAshop competences 04 Practical guide 05 The choice of the most well-known brands

80 Rotax engines 82 Iame engines 83 TM engines

128 AIM data acquisition 131 Race numbers and plates 132 Measure instruments and cameras 132 Kart covers 133 Kart accessories and various 134 Trolleys

INTRODUCTION

eQUIPMENT

08 Suits 14 Gloves 16 Shoes 18 Helmets and accessories 23 Mechanic equipment 24 Rain equipment 26 Sodi sportswear 33 Rotax sportswear 34 Protections for driver 36 Neck brace 37 Underwear

CHASSIS PARTS

40 Bodywork 44 Seats and accessories 48 Steering wheels 50 Wheel rims 54 Hubs 58 Shafts and woodruff keys 59 Roller bearings 60 Transmissions 66 Disks of hydraulic brake 67 Disk carriers of hydraulic brake 69 Brake calipers 70 Brake pads 71 Brake parts 72 Tanks 74 Stub axles - Ball joints - Tie rods 75 Caster - Camber washers 76 Nuts and bolts 77 Pedals and accessories

engines

PERIPHERICAL engine parts

86 Radiators and cooling accessories 88 Air boxes 90 Spark plugs and accessories 92 Batteries and accessories 94 Exhausts 96 Exhausts / Engine mounts flange 99 Carburettors

102 tools

ACCESSORIES

136 TYRES

138 Tyres approved in France 140 Tyres approved to international races

142

GENERAL INFORMATION

142 Index 144 General Sales Conditions

104 Tools for karts 109 Tools for tyres 112 Tools for engines

118

LUBRICANTS MAINTENANCE PRODUCTS

120 Oils 122 Maintenance products

011

THE WORLD LEADER EFFICIENCY

AT CUSTOMERS’ SERVICE !

Established in 1991, ITAKAshop is the trade name of Sodikart. “The World Leader in Karting” has been successfully asserting its position on a daily basis as the No. 1 specialist in the sale of karting equipment and accessories. ITAKAshop offers the widest range of karting equipment, spare parts and accessories with over 9,000 references in stock. Equipped with a 10,000m2 warehouse in Nantes, ITAKAshop dispatches several hundred packages each and every day. ITAKAshop aims to offer the best choice and the best price on its products to guarantee total satisfaction and provide an optimal service and high quality advice to both private individuals and professionals alike.

Tom JOYNER - SODI Official Driver â&#x20AC;&#x201C; 2013 CIK-FIA World Championship KF 03

PRACTICAL GUIDE TO ORDER

SHIPMENT *

Online

Metropolitan France

Order online on www.itakashop.com

Delivery within 24 to 48 hours (home or pick up point in France) from 8.90 € Free of charge for an order exceeding 600 €

Through our Itakashop network

Other destinations

Check out our website to get every details and find resellers : www.itakashop.com

Please see our website www.itakashop.com for more details. * for professional customers, refer to your usual conditions.

PAYMENT METHODS

AFTER-SALES SERVICE

Secure payment

+33 (0)2 40 38 26 20

We accept payments by credit card (Visa or Mastercard) and by PAYPAL (for orders placed by individuals and below 30 kg).

From Monday to Friday from 10:00 a.m to 12:00 a.m – 2:00 p.m to 6:00 p.m. Money-back guarantee If you change your mind once you have received your goods you have 14 days to return them. The goods must be returned complete, unused and in the original packaging accompanied by the original deliver y note (see general sales conditions on page 14 4).

+33 (0)2 40 38 26 20 From Monday to Friday from 10:00 a.m to 12:00 a.m – 2:00 p.m to 6:00 p.m. 04

contact@itakashop.com

itakashop 11, rue des imprimeurs ZA des Hauts de Couëron 44220 COUËRON - FRANCE

itakashop ALL THE LEADING

KARTING BRANDS IN ONE PLACE equipment

chassis parts NEW AGE KARTING

tyres

LUBRICANTS and MAINTENANCE PRODUCTS

ACCESSORIES ans tools

EQUIPMENT 08 Suits 14 Gloves 16 Shoes 18 Helmets and accessories 23 Mechanic equipment 24 Rain equipment 26 Sodi sportswear 33 Rotax sportswear 34 Protections for driver 36 Neck brace 37 Underwear

equipment

suits SIZE GUIDE See suits size guide on page 13 a

a b

BOX'S BKS ORANGE / green SUIT

Ref : EQ702.14T (orange) / EQ702.12T (green)

Suit totally printed especially designed for Karting practice. Ideal for both leisure and racing. Excellent value for money. Suit with exterior in cordura very resistant and pleasant to wear. Interior in soft cotton sponge. Accordion panel for lumbar and sides of the body enhances ease of movement when driving. Wrist and ankle cuffs provide a snug fit and help prevent unwanted movement of the suit. Shoulder gussets to enhance driving comfort. CIK-FIA LEVEL 2 APPROVED. EQ702.14T : 1 Colour : Black, Grey, White and Orange

EQ702.12T : 1 Colour : Black, Grey, White and Green

Child sizes : 120, 130, 140 and 150

Adult sizes : from 44 to 62

Raised collar

CIK-FIA Level 2 approved

Knitted wrist and ankle cuffs

Lumbar elastic panel

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

SIZE GUIDE See suits size guide on page 13

OFFICIAL SODI SUIT

Ref : EQ701.96T

Thanks to the partnership between Alpinestars and the Sodi Official Team, this racing suit benefits from the know how of the prestigious brand Alpinestars. Top end racing suit, complies with the CIK FIA Level 2 standard homologation, light and comfortable, that derives many technical innovations from Alpinestars range of premium auto racing suits. Construction : Technical two-layer construction that meets new homologation standards, featuring a 100% polymide outer shell and 3D poly-fabric lining

Lumbar elastic panel

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

for excellent levels of cooling airflow and comfort. Ergonomic fit : Engineered design for durability and superior performance fit. Mesh panels positioned on under arms and seat area. Fully-floating shoulder gusset construction with stretch material provides improved freedom of movement. Comfort : Stretch inserts around the lumbar area for enhanced flexibility. Knitted wrist and ankle cuffs provide a snug fit and help prevent unwanted movement of the suit. Adjustable collar and waist belt

Embroidered shoulder pads

CONTACT THE NEARESt ITAK ASHOP STORE

Adjustable belt

SHIPMENTS WITHIN 24H (see the practical guide page 4)

allows a customized fit. Two flat pockets. Official Sodi embroideries on the chest, collar, legs and back. Official Alpinestars embroideries on shoulders, sleeves and back. Mekaone and Tekneex embroideries on right sleeve and ITAKAshop and BOX'S embroideries on left sleeve. Sodi Official Team Colours. CIK-FIA LEVEL 2 APPROVED. Child sizes : 130, 140 and 150 Adults sizes : : from 42 to 60

Adjustable belt with embroidery

NEED SOME HELP ? +33 (0)2 40 38 26 20

equipment

suits a

ALPINESTARS SUPER KMX1 suit

ALPINESTARS KMX5 suit

Ref : EQ702.00T

Ref : EQ702.O4T (green) / EQ702.02T (red)

The SUPER K-MX 1 is Alpinestars premium karting suit, built for performance and protection. Newly developed Cordura main shell construction that is lightweight, highly breathable, abrasion resistant, durable and comfortable. Comfortable and breathable advanced poly-3D lining for exceptional levels of ventilation. Fully floating arm construction for minimal material resistance while driving. Developed lumbar stretch panel extend round the back and hip areas for improved stretch fit in driving position. Tech mesh inserts on crotch and under arm areas for high levels of airflow. Right elbow is reinforced with foam padding for resistance to abrasion and heat from the kart engine. Removable perforated poly-foam side torso padding for improved comfort and fit. Micro-fiber elastic foot loops secure suit in position without interfering with the foot pedals. Low profile collar for added convenience and comfort. CIK-FIA LEVEL 2 APPROVED.

The K-MX 5 is a versatile kart racing suit designed in polyamide and polyester for excellent levels of cooling airflow and comfort. Technical two-layer construction that meets new homologation standards, featuring a 100 per cent polyamide outer shell and 3D poly-fabric lining. Mesh panels positioned on under arms and seat area. Fully-floating shoulder gusset construction with stretch material provides improved freedom of movement. Stretch inserts around the lumbar area for enhanced flexibility. Adjustable collar and waist belt allows a tight, personalized fit. Two flat pockets. CIK-FIA LEVEL 2 APPROVED

1 Colour : Black and Orange Fluo Adult sizes : from 44 to 58

EQ702.04T : 1 Colour : Black and Green Fluo Child sizes : 120, 130, 140 and 150 Adult sizes : from 44 to 60 EQ702.02T : 1 Colour : Silver, Black and Red Adult sizes : from 44 to 60

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

SIZE GUIDE See suits size guide on page 13

ALPINESTARS kmx9 suit

Ref : EQ702.10T (orange) / EQ702.06T (black) / EQ702.08T (yellow)

The K-MX 9 is a versatile kart racing with an aggressive design offering durability and high levels of abrasion resistance. Technical three-layer construction featuring a Twill polyamide outer shell and a poly-toweling lining. Tech mesh panels positioned on under arms, seat area and bottom leg for maximum ventilation. Lumbar stretch panel for greater flexibility. Adjustable waist belt allows a tight, personalized fit. Two flat pockets. CIK-FIA LEVEL 2 APPROVED. EQ702.10T : 1 Colour : Black and Orange Fluo

EQ702.06T : 1 Colour : Black

EQ702.08T : 1 Colour : Black, Anthracite and Yellow Fluo

Child Sizes : 120, 130, 140 and 150

Adult Sizes : from 40 to 60

Adjustable belt with embroidery

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

Lumbar elastic panel

CONTACT THE NEARESt ITAK ASHOP STORE

Embroidered shoulder pads

SHIPMENTS WITHIN 24H (see the practical guide page 4)

Knitted wrist and ankle cuffs

NEED SOME HELP ? +33 (0)2 40 38 26 20

equipment

suits

BOX'S RT PRO SUIT

Ref : EQ701.10T

Purpose-built for an intensive use by the professional of rental market, this suit combines style and comfort, just like racing models. Material : Cotton / polyester mix. Finish : Elastic strips on each side at the top of the sleeves for improved freedom of movement. Wide Velcro strips on the collar, belt and ankles for

extremely quick dressing/undressing. Reinforced stitching. Two-way zipper. Colour : From 6/8 years old to 12/14 years old : Black. From XXS to XXXL : Black with light-gray and dark-gray strips. Quick size identification : 1 shoulder pad = 1 size.

suits sizes 6/8 y.o. 8/10 y.o. 10/12 y.o. 12/14 y.o. XXS XS

Dark blue Yellow fluo Purple Orange fluo White Orange

S M L XL XXL XXXL

Yellow Light gray Green Red Sky blue Black

R4 BOX’S HELMET The BOX’S R4 helmet size guide on page 20. One colour per size

Ankle velcro strips

Belt velcro strips

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

equipment

size guide

Suits - Ribs protectors suits orange / green Size

120

130

140

150

Mini (cm)

113

127

137

147

155

158

165

170

173

177

182

185

187

190

Maxi (cm)

126

136

146

156

163

170

175

180

183

187

190

195

198

202

Weight (Kg)

20-32

31-37

36-44

43-50

50-60

60-66

66-72

72-78

78-84

84-90

90-96

96-102

103-108 +105

Size

120 130 140 150 40 42 44 46 48 50 52 54 56 58 60

Mini (cm)

117 127 137 147 148 152 155 158 165 170 173 177 182 185 187

Maxi (cm)

126 136 146 156 154 157 163 170 175 180 183 187 190 195 198

Weight (Kg)

24-32 31-37 36-44 43-49 45-50 50-60 54-60 60-66 66-72 72-78 78-84 84-90 90-96 96-102 103-108

PRO RT Size

XXS XS S M L XL XXL XXXL

Mini (cm)

145 155 160 162 170 175 180 185

Maxi (cm)

155 165 168 170 180 190 190 195

Weight (Kg)

35-45 45-55 50-60 60-70 70-80 80-85 85-95 95-100

rain suits transparent Size kid s kid m xxs xs s m Mini (cm)

l xl xxl

120 130 140 150 157 170 175 180 185

Maxi (cm)

130 140 150 157 170 180 185 190 195

Weight (Kg)

25-30 30-40 40-50 45-50 50-65 65-75 75-85 80-90 90-110

RIBS PROTECTOR ALUMINIUM Size k 0 1 2 3 Mini Chest size (cm) 68 77 87 96 105 Maxi Chest size (cm) 77 87 96 105 114

Fiber Size Mini Chest size (cm)

XXS 62

XS 68

S 74

M 80

L 86

XL 92

XXL 98

Maxi Chest size (cm)

100

107

114

121

BIONIC Size Youth ADULT S-L ADULT XL-XXXL Mini Chest size (cm) 56 81 105 Maxi Chest size (cm) 82 104 124 ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

equipment

gloves

SODI KART RACING BGX GLOVES

BOX'S BGS GREEN or orange GLOVES

Ref : EQ721.70T

Ref : EQ721.71T (Green) / EQ721.72T (Orange)

Sodi Kart Racing gloves specially designed with professional drivers. Strong and comfortable double thickness gloves with pre-curved finger. Mesh fourchettes provide greater airflow while driving. Palm with silicon surface to improve grip. Internal seams.

Lightweight, strong and comfortable, double thickness, karting gloves. Mesh fourchettes provide greater airflow while driving. Palm with silicon surface to improve grip. Internal seams. EQ721.71T : 1 Colour : Black, Green, White and Light Grey

1 Colour : Black, Orange Fluo and White.

Child Sizes : S (4XS) - M (3XS) - L (XXS) - XL (XS) / Adult : S - M - L - XL - XXL

Sizes : XS/7 - S/8 - M/9 - L/10 - XL/11 - XXL/12

EQ721.72T : 1 Colour : Black, Orange, White and Light Grey Child Sizes : S (4XS) - M (3XS) - L (XXS) - XL (XS) / Adult : S - M - L - XL - XXL

BOX'S BGW wet weather GLOVES

PREMIUM BOX'S GLOVES

Ref : EQ721.73T

Ref : EQ721.18T

Wet weather karting gloves. Ideal for cold and rainy weather. Palm with silicon surface to improve grip. Internal seams.

Very supple gloves with leather palms at very attractive prices.

1 Colour : Black, Light Grey and White.

2 Colours : Black and White / Red and White Sizes : M - XL

Child Sizes: S (4XS) - M (3XS) - L (XXS) - XL (XS) / Adult : S - M - L - XL - XXL

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

ALPINESTARS TECH 1-K RACE GLOVES

ALPINESTARS TECH 1-K GLOVES

Ref : EQ721.66T (Orange) / EQ721.67T (White) / EQ721.65T (Yellow)

Ref : EQ721.63T (green) / EQ721.64T (anthracite)

Lightweight karting glove. Nylon-cotton construction provides optimum feel and enhanced comfort in warm weather conditions. Pre-curved fingers and palm. Lycra fourchettes promote comfort and durability. Internal seams.

Karting glove has been specifically engineered to offer drivers an exceptional level of comfort and feel. Two-layer stretch poly-cotton construction provides the optimum combination of weight, feel and comfort. Ergonomically designed grip treatment on palm areas for improved feel, durability, mobility and grip. Pre-curved fingers and palm for a perfect fit. Mesh fourchettes provide greater airflow while driving. Synthetic suede palms. Internal seams.

EQ721.66T : 1 Colour : Black and Orange fluo Child Sizes : S (4XS) - M (3XS) - L (XXS) - XL (XS) / Adult : S - M - L - XL - XXL EQ721.67T : 1 Colour : Black and White Child Sizes : S (4XS) - M (3XS) - L (XXS) - XL (XS) / Adult : S - M - L - XL - XXL EQ721.65T : 1 Colour : Black and Yellow fluo Sizes: S - M - L - XL - XXL

EQ721.63T : 1 Colour : Black and Green fluo Sizes : S - M - L - XL - XXL EQ721.64T : 1 Colour : Black and Anthracite Sizes : S - M - L - XL - XXL

ALPINESTARS TECH 1-Kx GLOVES

Ref : EQ721.62T

Premium karting glove combining innovative technologies and materials to offer superior levels of sensitivity, comfort and performance. Two-layer stretch nyloncotton construction provides the optimum combination of weight, feel and comfort. Ergonomically designed grip treatment on palm areas for improved feel, durability, mobility and grip. Pre-curved fingers and palm for a perfect fit. Mesh fourchettes provide greater airflow while driving. Synthetic suede palms. External seams.

ALPINESTARS TEMPEST WET WEATHER GLOVES

Ref : EQ721.56T

The Tempest is a versatile, wet weather glove featuring a full fleece lining and water-resistant main construction. An advanced rubber composite palm offers excellent grip and control in wet conditions. Velcro wrist closure.

1 Colour : Black and Orange fluo

1 Colour : Black and Green fluo

Sizes : S - M - L - XL - XXL

Sizes : XS - S - M - L - XL - XXL

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

equipment

SHOES

ALPINESTARS TECH 1-K START SHOES

Ref : EQ751.07T (Black) / EQ751.09T (White)

The Tech-1 K Start shoe is constructed from durable and lightweight microfiber for optimized levels of protection, comfort and performance fit. Integrated construction consisting of perforated microfiber and soft inner lining for high levels of comfort and breathability. New sleek shoe profile follows foot anatomy and guarantees great fit and performance. Strategically positioned perforation

zones for enhanced cooling performance and maximized airflow. Traditional symmetric lacing system for personalized fit and secure closure. All graphic elements are printed for excellent weight-saving. Lightweight rubber compound sole with textured grip and improved pedal feel in race conditions. External heel real rubber for improved abrasion resistance and protection.

EQ751.07T : 1 Colour : Black and White Sizes : from 34 to 46 EQ751.09T : 1 Colour : White, Black and Red Sizes : from 34 to 46

kids

ALPINESTARS TECH 1-K S SHOES

ALPINESTARS TECH 1-K SHOES

Ref : EQ751.031T

Ref : EQ751.21T

Driver's shoes specifically designed for the younger kart racer, comfortable and light. Ultra-thin sole constructed from an exclusive rubber compound for greater grip in both wet and dry conditions. Durable lace closure system and Velcro strap offers safe and secure fitting.

The Tech-1 K shoe is developed to withstand the stresses of kart racing. Durable nubuck microfiber upper with strategically positioned perforated zones for lightweight performance, excellent breathability and superior feel. External toe reinforcements on both sides for additional abrasion resistance and protection. Dual asymmetric closure system incorporates adjustable velcro strap plus traditional lace loop system coupled for personalized fit and secure closure. Tongue features perforated soft padding for comfort and improved fit. Ultra-thin Formula 1 specification sole uses Alpinestars exclusive rubber compound which is strategically ribbed to provide pedal sensitivity and grip - in both wet and dry conditions. External rear heel rubber for improved abrasion resistance and protection.

1 Colour : Black and Orange / Child sizes : 30 and 32

1 Colour : Black and White / Sizes : from 38 to 46

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

ALPINESTARS TECH 1-Kx shoes

Ref : EQ751.05T

The Tech-1 KX shoe offers serious kart drivers optimized levels of fit, flexibility and lightweight performance. Designed and developed specifically for the stresses of kart racing. Advanced seamless thermo-welded construction consisting of PU film and 3D mesh for ultra-lightweight performance, with no pressure points on foot for improved comfort and superior feel.

New sleek shoe profile follows foot anatomy and guarantees great fit and performance. External heel, ankle and internal toe reinforcements for abrasion resistance and protection. Alpinestars' lace-lock system constructed from an advanced polymer resin guarantees quick, precise and secure closure of the shoe. Dual asymmetric closure system incorporates adjustable velcro strap plus traditional lace loop

ALPINESTARS TECH 1-KZ shoes

system coupled for personalized fit and secure closure. Tongue features perforated soft padding for comfort and improved fit. Ultra-thin Formula 1 specification sole uses Alpinestars exclusive rubber compound for pedal sensitivity and grip, in both wet and dry conditions. 1 Colour : Black and Orange fluo / Sizes : from 34 to 46

ALPINESTARS ALLOY shoes

Ref : EQ751.00T

Ref : EQ751.01T

The Tech 1-KZ is an all new flagship range of karting shoes from Alpinestars which raises the bar for performance and comfort. Advanced seamless thermo-welded construction offering ultra-lightweight and maximum foot sensitivity. An asymmetric speed lace system with ultra-thin strap provide an unrivalled fit and feel. External heel and ankle reinforcement plus seamless internal toe reinforcement provide excellent abrasion resistance and protection. Ultra-thin Formula 1 specification sole for pedal sensitivity and grip, in both wet and dry conditions.

Alpinestars Alloy shoe constructed from a lightweight and breathable multi-mesh upper for airflow and comfort, ideal for the paddock. Tongue and collar incorporate highly breathable micro-perforated textile for additional cooling performance. Alpinestars' exclusive vulcanized compound outer sole with dual density EVA foam for cushioning and repeated foot-fall shock absorption. This shoe features a unique, high strength sole construction offering durability, rigidity and protective performance.

1 Colour : Black, Silver and Orange fluo / Sizes : from 38 to 46

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

1 Colour : Black and White / Sizes : from 38 to 46

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

equipment

helmets and accessories a

KC7-cmr BELL HELMET

RS7-K BELL HELMET

Ref : EQ761.22T

Ref : EQ761.18T

Helmet features a ultra lightweight Carbon/Kevlar/Glass hand laminated shell. The very attractive design (based on HP7 helmet, used in F1) has been adapted to young drivers morphology. 2 mm shield with double screen anti-fog for optimal vision under all circumstances. Optimized shell & shield design resulting in improved aerodynamic behaviour and energy absorbing capacities. Powerful top and chin bar ventilations thanks to a total of no less than 14 air intakes and extraction channels. SNELL CMR2016 approved (mandatory for drivers under 15 years old in CIK/FIA competition). Helmet also used by adults.Not approved on the road.

Identical design as HP7 with lightweight composite shell. Optical grade injected double screen anti-fog visor for perfect vision under most severe circumstances. Powerful top and chin bar ventilations thanks to a total of no less than 14 air intakes and extraction channels. Optimized shell & shield design resulting in improved aerodynamic behaviour and energy absorbing capacities. SNELL K2015 approved. Not approved on the road.

Sizes : 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 c

Sizes : S (57/58 cm) - M (58/59 cm) - L (60/61 cm) - XL (61/62 cm) d

SK6 ARAI HELMET

Ref : EQ761.127T

CK6-CMR ARAI HELMET

Ref : EQ761.13T

Karting helmet using the best of ARAI technology. 2 mm visor with performance screw kit. 2 forehead vents, 2 chin vents and 2 top air outlets. Comfortable, strong foams. SNELL CMR2016 approved (mandatory for drivers under 15 years old in CIK/FIA competition).Helmet also used by adults. Not approved on the road. Sizes : XXS (50/51 cm) - XS (52/53 cm) - S (54/56 cm) - M (57/58 cm) - L (59 cm)

Karting helmet using the best of ARAI technology. 3 mm visor with performance screw kit. 2 forehead vents, 2 chin vents and 2 top air outlets. Comfortable, strong foams. SNELL K2015 approved. Not approved on the road. Sizes : S (55/56 cm) - M (57/58 cm) - L (59/60 cm) - XL (61/62 cm) e

GP6-S ARAI HELMET WITH HANS CLIPS

Ref : EQ761.117T

Automobile helmet using the best of ARAI technology. 3 mm visor with performance screw kit. Forehead and chin vents. Comfortable, strong Nomex foams. The shell is perfectly suited to the Hans system (special cut-out to match the shape of the Hans). Fitted with Hans clips. SNELL SA2015 and FIA 8859-2015 approved.Not approved on the road. Sizes : S (55/56 cm) - M (57/58 cm) - L (59/60 cm) - XL (61/62 cm)

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

b c d

KC7 BELL VISOR

RS7-K/RS7 BELL VISOR

RS3/RS3-K/KC3 BELL VISOR

Ref : EQ762.13C

Ref : EQ762.14C

Ref : EQ762.035C

For KC7 Bell helmet. 2 mm thickness screen.

For RS7-K, RS7 Carbon, RS7 Pro Bell helmets. 3 mm thickness screen.

For RS3, RS3-K and KC3 Bell helmets. 3 mm thickness screen (double thickness anti-fog screen).

Clear - Yellow - Dark smoke - Red mirror multilayer Blue mirror multilayer d

KC3 BELL VISOR

Clear - Yellow - Dark smoke - Red mirror multilayer Blue mirror multilayer e

Ref : EQ762.03C

Clear - Yellow - Dark smoke - Red mirror multilayer Blue mirror multilayer

KC7/RS7/rs7-K BELL TEAR OFFS

KC3/RS3/rs3-K BELL TEAR OFFS

Ref : EQ764.032

Ref : EQ764.024

Pack of 10 Tear-offs for KC7, RS7 and RS7-K Bell helmets.

Pack of 10 Tear-offs for KC3, RS3 and RS3-K Bell helmets.

For KC3 Bell helmet. 2 mm thickness screen. Clear - Iridium blue g

black BELL SCREWS KIT

BELL AIR INTAKE

BELL TOP SPOILER

Ref : EQ764.02C

Ref : EQ764.028C

Ref : EQ764.029C

For KC3, RS3, KC7 and RS7 Bell helmets.

This air intake improves ventilation inside the helmet. For KC3, RS3, KC7 and RS7 Bell helmets. Clear.

Aerodynamic accessory. For KC3, RS3, KC7 and RS7 Bell helmets. Clear. f c e

CK6 ARAI VISOR

CK6/GP5/SK5 ARAI TEAR OFFs

GP6-S/SK6 ARAI SCREWS KIT

Ref : EQ762.02C

Ref : EQ764.001

Ref : EQ764.008

For CK6 Arai helmet. 2 mm thickness screen.

Pack of 5 Tear-offs for CK6, GP5 and SK5 Arai helmets.

Full kit for GP6-S and SK6 Arai helmets.

Clear- Dark smoke - Iridium red / orange - Iridium blue d b

GP6-s/SK6 ARAI VISOR

Ref : EQ762.016C

GP6-S/SK6 ARAI TEAR OFFS

PED KIT FOR ARAI HELMET

Ref : EQ764.004

Pack of 5 Tear-offs for GP6-S and SK6 Arai helmets.

Performance Enhancing Device (PED) Kit. Fits all Arai helmets. Clear. Comes with double-sided mounting tape already installed.

For GP6-S/SK6 Arai helmets. 3 mm thickness screen. Clear- Dark smoke - Iridium red / gold - Iridium blue

Ref : EQ764.007

CK6 ARAI SCREWS KIT

Ref : EQ764.009

Full kit for CK6 Arai helmets. ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

equipment

helmets and accessories

R4 BOX'S HELMET

Ref : EQ761.75T

resistant, 2 mm thickness screen. Comfortable, aerodynamic, easy to put on and take off, easy to use, providing good peripheral vision and noise control, the BOX'S R4 helmet is unique on the market. ECE 22.05 and road approved.Helmet also allowed in competition in France (except CIK races).

BOX'S R4 helmet is an excellent value for money. It is perfectly suited for the rental market. Each colour corresponds to one size, which makes them easy to organize and fit. The BOX'S R4 helmet features a comfortable antibacterial fabric liner, non-deformable polyurethane cheeks, a clear visor, anti-fog and scratch

helmets sizes Kid XS S M

Light blue Yellow Grey Orange

L XL XXL

b c

R4 BOX'S HELMET BUCKLE

R4 BOX'S HELMET VISOR SCREW

Ref : EQ764.047

Ref : EQ764.048

Helmet buckle for R4 BOX'S helmet.

Screw for R4 BOX'S helmet visor.

R4 BOX'S VISOR

R4 BOX'S VISOR FASTENING KIT

Ref : EQ762.114C

Ref : EQ764.046

Visor for R4 BOX'S helmet. Anti-scratch resistant. 2 mm thickness screen.

Fastening kit for R4 BOX'S helmet visor. Sold by pair.

2 Colours : Clear - Dark Smoke

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

Green Red Dark blue

ARAI HELMET BAG

BELL HELMET BAG

Ref : EQ766.002

Ref : EQ766.008

Ideal for all ARAI helmets.

Ideal for all BELL helmets.

BOX'S HELMET BAG

SPARCO HELMET BAG

Ref : EQ766.005

Ref : EQ766.007

For all types of helmet. With its fully-padded interior, this BOX'S helmet bag efficiently protects your helmet.

Wide waterproof SPARCO helmet bag with inside pocket.

RAIN X RAIN REPELLENT

Rain X Anti-Fog

Ref : LU836.051

Ref : LU836.052

Rain-X Rain Repellent dramatically improves wet weather driving visibility. Simply apply the treatment to exterior glass and watch the raindrops fly off your windscreen while driving. Rain-X helps improve visibility by repelling rain, sleet and snow. Usage Instructions : Clean and dry surfaces before treating. Apply product to a small, folded, dry cloth. Wipe onto exterior glass using a firm, circular and overlapping motion. Allow product to dry; a slight haze may appear. Reapply product to ensure complete and uniform coverage. Remove final haze with a dry cloth or by sprinkling water onto the haze and wiping with a paper towel.

Rain X Anti-Fog is designed to eliminate interior condensation caused by wet weather, high humidity levels or temperature changes. Prevents interior fogging before the problem begins. Usage Instructions : Clean and dry surfaces before treating. Apply product to a small, folded, dry cloth.Wipe onto exterior glass using a firm, circular and overlapping motion. Allow product to dry. Reapply product to ensure complete and uniform coverage.Remove final haze with a dry cloth. 200 ml

200 ml l

BELL HELMET CLEANING KIT

XPS VISOR CLEANER

Ref : LU838.001

Ref : LU833.002

Bell helmet cleaning kit. Kit including : · 250 ml. wax free polish

· 250 ml. shield cleaner · 2 microfibre cleaning cloths

For thoroughly and effective cleaning of the helmet visor. Removes greasy finger marks and squashed insects without a problem and gives a sparkling finish to the helmet visor. Shake well before use and spray sparingly onto surface. Wipe of immediately and polish with a clean and dry cloth. 200 ml

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

equipment

MECHANIC equipment b c

ALPINESTARS ALLOY SHOES

BOX'S RAIN CLOAK

BOX'S APRON FOR MECHANIC

Ref : EQ751.01T

Ref : EQ703.50T

Ref : EQ771.002

Alpinestars ALLOY shoe constructed from a lightweight and breathable multi-mesh upper for airflow and comfort, ideal for the paddock. Tongue and collar incorporate highly breathable micro-perforated textile for additional cooling performance.

Long transparent rain cloak. Hood. 2 pockets. Snap closure. UV resistant. Box's logo opposite heart and back for an excellent visibility of your logos, sponsors, etc...

Black apron, with 3 big pockets, ideal for protecting your equipment. One size fits all

Sizes : M - L - XL

Sizes : from 38 to 46 / 1 colour : Black and White

THIN MECHANIC'S GLOVES

MECHANIC'S GLOVES WITH SPIKES

Ref : EQ722.00T

Ref : EQ722.002

Specially designed for precision work, these gloves make the mechanic feel as though he has a 2nd skin. Their stretch material gives them high-precision grip, particularly for greasy or oily parts. Coated palm and fingers. Washable. CE marking on these gloves. Sold as a pair.

Very strong gloves, with rubber spiked palms excellent for gripping tools. Sold as a pair. One size fits all.

Sizes : M (Size 9) and L (Size 10). ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

equipment

Rain equipment d

TRANSPARENT BOX'S RAIN SUIT

BLACK/ORANGE BOX'S RAIN SUIT

Ref : EQ703.04T

Ref : EQ703.001T

Very high quality, light, 100% waterproof rain suit made from heavy-duty material. Transparent (ideal for visibility of the sponsor's logos). Elastic wrist and ankle.

BOX'S rain suit, PVC material, light and very strong, 100% watertight. Specially designed for driving comfort. Orange fluo large collar neck protector. Elastic cuffs and on the back-waist. Crotch lining. Zipper with protective flaps fastened by press studs. Press studs at the bottom of legs. Made in France.

1 Colour : Transparent Child Sizes : Kid S - Kid M - XXS - XS / Adult : S - M - L - XL - XXL

1 Colour : Black and Orange fluo Child Sizes : 8/10 y.o. - 12/14 y.o. / Adult : S - M - L - XL - XXL c

BLACK BOX'S RAIN SUIT

BOX'S RAIN CLOAK

Ref : EQ703.05T

Ref : EQ703.50T

BOX'S rain suit, light and strong, 100% waterproof, designed for driving comfort. 100% Polyester with PVC Coated. Elastic cuffs and on the back-waist. Zipper with protective flaps fastened by velcro. Velcro at the bottom of legs.

Long transparent rain cloak. Hood. 2 pockets. Snap closure. UV resistant. Box's logo opposite heart and back for an excellent visibility of your logos, sponsors, etc...

1 Colour : Black

Sizes : M - L - XL

Sizes : XXS - XS - S - M - L - XL - XXL - XXXL

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

i j

BOXS BGW wet weather GLOVES

SPARCO RAIN OVERSHOES

Ref : EQ721.73T

Ref : EQ752.007T

Wet weather karting gloves. Ideal for cold and rainy weather. Palm with silicon surface to improve grip. Internal seams.

SPARCO waterproof neoprene karting overshoes. Ideal for protecting your race boots. To wear over the shoe, whilst keeping your feet warm and dry. Composition : Neoprene 100 % with external fabric 80 % Nylon + 20 % Spandex. Natural rubber sole. Velcro closure for maximum fitting comfort.

1 Colour : Black, Light Grey and White. Child Sizes: S (4XS) - M (3XS) - L (XXS) - XL (XS) / Adult : S - M - L - XL - XXL

Shoes sizes : from 36 to 38 (S)

ALPINESTARS TEMPEST WET WEATHER GLOVES

Ref : EQ721.56T

1 Colour : Black and Green fluo

TURBO VISOR

Ref : EQ763.00C

Highly-efficient swivelling visor for driving in the rain whilst providing perfect visibility. Secured to the helmet by an elastic strap. 1

SODI KART RACING UMBRELLA

Ref : EQ781.010

Black automatic open umbrella with a big Sodi logo on 2 sides and one small Sodi logo on a side opposite. Aluminium shaft. Aluminium handle with foam padding. Ribs in fibreglass. Diameter: 118 cm (8 sides).

Sizes : XS - S - M - L - XL - XXL

from 42 to 44 (L) from 45 to 47 (XL)

from 39 to 41 (M)

ROTAX TEAM UMBRELLA

Ref : EQ781.001

Clear EQ763.001 Yellow EQ763.002

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

equipment

sodi sportswear

a c

SODI KART RACING T-SHIRT

SODI KART RACING BERMUDA

SODI KART RACING POLO shirt

Ref : EQ710.52T

Ref : EQ708.01T

Ref : EQ714.11T

Black, white and orange Sodi Kart Racing t-shirt. Sodi logo front left side and back under the collar. Itakashop.com and Box's logos on right sleeve. Mekaone and Tekneex logos on left sleeve. 160 g, 100% cotton.

Black Sodi Kart Racing bermuda shorts. 2 back pockets (with embroidered Sodi logo on right back pocket) and 2 side pockets (with embroidered Sodi logo on left side pocket). 100% cotton.

Black, white and orange Sodi Kart Racing polo shirt. Embroidered Sodi logo front left side and back under the collar. Embroidered Itakashop.com and Box's logos on right sleeve. Embroidered Mekaone and Tekneex logos on left sleeve. 220 g, 50% cotton and 50% polyester.

Sizes : 8 y.o. - XXS - XS - S - M - L - XL - XXL - XXXL

Relief printed back 26

Sizes : 38 (S) - 40 (M) - 42 (M/L) - 44 (L) - 46 (L/XL) 48 (XL) - 50 (XL/XXL) - 52 (XXL)

Side pocket with embroidery

Sizes : 8 y.o. - XXS - XS - S - M - L - XL - XXL - XXXL

Embroidered logo front

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

SODI KART RACING SWEAT-SHIRT

SODI KART RACING FLEECE JACKET

Ref : EQ712.08T

Ref : EQ712.07T

Black and orange Sodi Kart Racing hooded sweater. Embroidered Sodi logo front left side. Embroidered Itakashop.com, Box's, Mekaone and Tekneex logos on right sleeve. 90% cotton and 10% polyester.

Black Sodi Kart Racing fleece jacket. Fully lined. 3 zipped pockets. Embroidered . Sodi logo front left side and back. Embroidered Itakashop.com, Box's, Mekaone and Tekneex logos on right sleeve. 280g/m2 polyester fleece. 100% cotton lining.

Sizes : 8 y.o. - XXS - XS - S - M - L - XL - XXL - XXXL

Hood with 2 Colours ORDER ON-LINE ON WWW.ITAK ASHOP.COM

Sizes : 8 y.o. - XXS - XS - S - M - L - XL - XXL

Knitted wrist and large pocket CONTACT THE NEARESt ITAK ASHOP STORE

Front pocket SHIPMENTS WITHIN 24H (see the practical guide page 4)

Embroidered logo back NEED SOME HELP ? +33 (0)2 40 38 26 20

equipment

sodi sportswear

SODI KART RACING BACKPACK

SODI KART RACING TRAVEL ROLLER BAG

Ref : EQ718.013

Ref : EQ718.006

Black Sodi Kart Racing backpack, comfortable and practical. 3 compartments : - Padded laptop compartment on back for laptop compatible up to 15.4 inches. - Main compartment with headphone port. - Front compartment with organiser section. Zippered side pockets. Padded adjustable shoulder straps. Grab handle.

High quality black Sodi Kart Racing roller bag. Large opening top, side pocket, retractable handle system, 2 wheels, removable shoulder strap, two handles. Sodi logo on the top and on the side pocket. 100% polyester. Dimensions : 78 cm (L) x 40 cm (l) x 35 cm (H)

Dimensions : 34x45x21 cm / Capacity : 23 litres

SODI KART RACING KEY CHAIN

SODI USB FLASH DRIVE 8gb

Ref : EQ781.025

Ref : EQ781.060

Sodi Kart Racing key chain of soft plastic, dimensions 70 x 33 mm.

Sodi 8gb usb flash drive with a sliding mechanism thus eliminating the need for a cap, whilst the functional integrated key ring allows for easy attachment.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

SODI CABIN LUGGAGE

LARGE SODI KART RACING TRAVEL ROLLER BAG

Ref : EQ718.010

Ref : EQ718.011

This cabin luggage is the perfect travel companion. This trolley has a durable ABS hard shell and its' 4 spinner wheels give it great versatility in its movement. Easy to carry or wheel and extendable trolley handle. 2 compartments : - 1 with elastic cross ribbons to secure packed items - 1 with a zip pocket SODI logo on the left side of the trolley. Accepted as carry-on luggage.

Large black Sodi Kart Racing travel roller bag. Perfect for transporting all your gear: race suit, gloves, shoes, helmet etc. One large main compartment and one helmet compartment and one shoes compartment. Double-bottomed with reinforced base and zip. Telescopic handle, removable shoulder strap and sturdy wheels. Sodi embroideries on the top and on the side. 100% polyester. Dimensions : 82 cm (L) x 35 cm (l) x 40 cm (H)

Dimensions : 48 cm (H) x 40 cm (L) x 20 cm (P)

SODI SUNGLASSES

Ref : EQ781.070

With their timeless design and their mirrored lenses and their frame carbon type, SODI sunglasses have a trendy style and provide excellent sun protection. Category 3 polarizing lenses : Ideal in sunny weather. Delivered with a case.

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

equipment

sodi sportswear c

SODI KART RACING JACKET

SODI KART RACING TROUSERS

SODI KART RACING WINDBREAKER JACKET

Ref : EQ716.10T

Ref : EQ707.22T

Ref : EQ716.14T

Black Sodi Kart Racing softshell jacket. Three layers of light soft-shell, breathable, water and windproof fabric. Two zipped side pockets. One breast pocket and one large zipped inside pocket. Adjustable tightening waist cord. Cuffs adjustable by means of Velcro strips. Embroidered Sodi logo front and back under the collar. Outer 92% polyester, 8% elastane fibre. Lining 100% polyester microfleece.

Black Sodi Kart Racing trouser. The cut and fabric allow you a maximum freedom of movement. 2 front pockets and 2 back pockets (with embroidered Sodi logo on the back left pocket. 100% cotton.

Black, orange and white Sodi Kart Racing windbreaker jacket. Hood can be stored away in the collar of the windbreaker jacket. 2 zippable side pockets and 1 zippable inside pocket. Adjustable tightening waist cord. Embroidered Sodi logo front left side and back, Itakashop.com, Box's, Mekaone and Tekneex logos front right side, Itakashop.com and Box's logos on left sleeve, and Mekaone and Tekneex logos on right sleeve. Shell: 100% nylon. Lining: 100% polyester. Waterproof liner.

Sizes : 38 (S) - 40/42 (M) - 44/46 (L) - 46/48 (XL) 48/50 (XXL) - 52-54 (XXXL)

Sizes : XS - S - M - L - XL - XXL

Embroidered logo back under the collar 30

Embroidered logo on the back left pocket

Embroidered logos front

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

SODI KART RACING SOFTSHELL JACKET

SODI KART RACING QUILTED JACKET

Ref : EQ716.13T

Ref : EQ716.15T

Black, orange and white slightly slim fit Sodi Kart Racing softshell jacket. 2 zippable side pockets and 1 inside pocket. Adjustable tightening waist cord. Sodi logo front left side and back. Itakashop.com, Box's, Mekaone and Tekneex logos on left and right sleeves. Composition: 3 layer soft-shell fabric - lining: 100% polyester mesh. Waterproof.

Black, orange and white Sodi Kart Racing padding quilted jacket. Hood can be stored away in the collar of the windbreaker jacket. 2 zippable side pockets and 1 zippable inside pocket. Adjustable tightening waist cord. Embroidered Sodi logo front left side and back. Embroidered Itakashop.com, Box's, Mekaone and Tekneex logos front right side. Embroidered Itakashop.com and Box's logos on left sleeve. Embroidered Mekaone and Tekneex logos on right sleeve. Shell: 100% nylon. Lining: 100% polyester - 160 gsm padding. Waterproof liner.

Sizes : 8 y.o. - 12 y.o. - XXS - XS - S - M - L - XL - XXL - XXXL

Sizes : XS - S - M - L - XL - XXL

Printed sublimation on back

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

Zipped pocket

CONTACT THE NEARESt ITAK ASHOP STORE

Embroidered logo back

SHIPMENTS WITHIN 24H (see the practical guide page 4)

Inner lining

NEED SOME HELP ? +33 (0)2 40 38 26 20

equipment

sodi sportswear Woman

Man

Woman model : Slim fit.

LIGHT DOWN JACKET SODI KART RACING MAN AND WOMAN

SODI KART RACING FLEECE HAT

Ref : EQ716.12T (Man) / EQ716.117T (Woman)

Ref : EQ715.063

MAN and WOMAN grey and orange Sodi Kart Racing light down jacket. Super air-soft handle with hand filled polyester fibre. Extremely lightweight and warm. Easy to pack, compact stowage. Adjustable hood. Water repellent. Embroidered Sodi logo front. Outer and lining: 100% nylon. Filling: 100% polyester.

Black fleece hat. 100% acrylic.

Man : S - M - L - XL - XXL Woman : XS - S - M - L - XL

SODI KART RACING CLOCK

One size fits all

EQ716.12T EQ716.117T

SODI KART RACING cap

SODI KART RACING UMBRELLA

Ref : EQ781.080

Ref : EQ715.011

Ref : EQ781.010

Sodi Kart Racing clock of diameter 30.5 cm. Case in black resin. Quartz movement 3 hands. Delivered with a battery.

Black cap. Grey inside visor. Adjusted by metal buckle. 100% cotton.

One size fits all

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

equipment

rotax sportswear

ROTAX RACING SOFTSHELL JACKET

ROTAX SWEAT JACKET

Ref : EQ716.04T

Ref : EQ712.25T

Black and grey Rotax softshell jacket. Water resistant and breathable. Rotax and Rotax Max Challenge logos embroideries on back. XPS logo embroidery on right sleeve. Rotax and Rotax Racing logos on the front. Many pockets. Outer: 95% polyester and 5% elastane. Lining: 100% microfleece.

Grey, black, red and white zipped Rotax sweat jacket. Rotax Racing logo on the front. Rotax and Mojo logos embroideries on right sleeve and Rotax Racing logo on left sleeve. 2 pockets. 60% cotton, 40% polyester. Sizes : S - M - L - XL

Sizes : XS - S - M - L - XL

BLACK ROTAX T-SHIRT

ROTAX RACING CAP

Ref : EQ710.44T

Ref : EQ715.024

ROTAX black and red t-shirt. ROTAX Racing logos on front and on the back. Logo embroideries on sleeves. 95% cotton and 5% elastane.

Black, white and red cap. Rotax Racing logo on the front. Adjustable.

ROTAX TEAM UMBRELLA

Ref : EQ781.001

Sizes : S - M - L - XL ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

equipment

Protections for driver size guide See ribs protectors size guide on page 13.

BOX'S FIBER RIBS PROTECTOR

Ref : EQ741.08T

BOX'S fiber ribs protector (made up of 4 layers of fiberglass), very comfortable and lightweight. Top of the range. Essential for racing and also training. Adjustable straps and fast locking buckle on front, to put on or remove it easily. Sizes : XXS - XS - S - M - L - XL - XXL

BOX'S ALUMINIUM RIBS PROTECTOR

FRONT PROTECTOR

Ref : EQ741.04T

Ref : EQ741.044

BOX'S aluminium ribs protector. Adjustable height, front and back. Its external composite shell provides perfect protection and its interior made from absorbant material gives it unparalleled comfort.

Complementary accessory to the BOX'S Aluminium ribs protector (Ref : EQ741.04T). Povides extensive protection to the ribs cage.

Sizes : K (Kid) - 0 (S) - 1 (M) - 2 (L) - 3 (XL).

One size fits all

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

BOX'S RIBS PROTECTOR

Ref : EQ741.00T

Ribs support with reinforcing plates for optimum safety. Perfect support and maximum driver comfort. Sizes : Youth - Adult

ALPINESTARS BIONIC RIBS PROTECTOR

Ref : EQ741.02T

This model is a high performance ergonomic ribs protector designed to offer comfort and support. Dual density laminated padding against the body offers effective impact protection and reduced vibration. A fiber-glass is used to disperse energy away from the impact point. This model is a fully adjustable for secure support and comfortable personalized fit. Sizes : Youth - Adult (S-L) - Adult (XL-XXXL)

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

equipment

Neck brace Top Quality

EVS R4 RACE COLLAR

Ref : EQ732.04T

Race collar very comfortable and lightweight : - Minimizes risk of axial compression, hyperflexion, hyperextension and lateral hyperflexion; - Easy front entry system; - Fully adjustable sizing; Youth (Size < 1.52 m - Weight < 48 kg) Adult (Size > 1.52 m - Weight > 48 kg)

- Very comfortable and lightweight; - Soft rubberized edges for increased comfort; - Provides amazing range of motion of head. Weight : 386 g (Youth size) - 635 g (Adult size).

BOX'S adhesive sticker to stick directly on the EVS R4 race collar. 3 Colours : Red - Green - Orange Sizes : Youth - Adult

EQ732.040 EQ732.041

BOX'S HEAD SUPPORT

BOX'S HEAD SUPPORT COVER

Ref : EQ732.00C (Child) / EQ732.02C (Adult)

Ref : EQ732.05T

Essential for driver safety, made from high density foam.

BOX'S head support cover. Protects the neck brace when fitted over the original cover. Waterproof material.

Child Red Child Black Adult Red Adult Black

STICKER EVS R4 RACE COLLAR

Ref : AC701.00T

EQ732.002 EQ732.004 EQ732.027 EQ732.026

Child Blue Adult Black Adult Red

EQ732.051 EQ732.052 EQ732.053

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

equipment

underwear

COTON BALACLAVA

BOX'S POLYESTER BALACLAVA

ROTAX BALACLAVA

Ref : EQ731.01C

Ref : EQ731.06C

Ref : EQ731.071

Stretch cotton balaclava.

Ergonomic very comfortable balaclava. 100% polyester.

Light and breathable balaclava with COOLMAXÂ® fabric (Functional fibers based on 100% polyester). Moisture wicking technology.

3 Colours : White - Black - Red One size fits all

1 Colour : Black One size fits all

ALPINESTARS KX SHORT SLEEVES TOP

ALPINESTARS KX BOTTOM

Ref : EQ710.218T

Ref : EQ707.15T

Ideal for driver comfort, the ALPINESTARS top provides improved body temperature control under the suit and does not hamper the breathing capacity. Polypropylene fabric main construction. Short sleeves.

Specially developed for Karting, the ALPINESTARS bottom engineered for superior body temperature regulation and muscle support. Polypropylene fabric main construction. 1 Colour : Black / Sizes : S/M - L/XL

1 Colour : Black / Sizes : S/M - L/XL e

ALPINESTARS KX TOP LONG SLEEVES

ALPINESTARS BALACLAVA

Ref : EQ731.090

Ref : EQ710.21T

Polypropylene fabric main construction. Engineered for superior body temperature regulation. Flat seams for greater comfort. 1 Colour : Black / One size fits all

1 Colour : Black / Sizes : S/M - L/XL ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

CHASSIS PARTS 40 Bodywork 44 Seats and accessories 48 Steering wheels 50 Wheel rims 54 Hubs 58 Shafts and woodruff keys 59 Roller bearings 60 Transmissions 66 Disks of hydraulic brake 67 Disk carriers of hydraulic brake 69 Brake calipers 70 Brake pads 71 Brake parts 72 Tanks 74 Stub axles - Ball joints - Tie rods 75 Caster - Camber washers 76 Nuts and bolts 77 Pedals and accessories

CHASSIS PARTS

Bodywork b

KG 506 SPOILER Black

KG FP7 SPOILER Black

Ref : PC0613.207

Ref : PC0641.156

Ref : PC0613.201

KG FP7 Nassau PANEL Black

KG MK14 SPOILER Black

Ref : PC0613.197

KG 506 Nassau PANEL Black

Ref : PC0641.154

KG MK14 Nassau PANEL Black

Ref : PC0641.161

1 2

KG 506 NASSAU PANEL BRACKETS

KG FP7 NASSAU PANEL BRACKETS

KG MK14 NASSAU PANEL BRACKETS

Ref : PC0642.17M

Ref : PC0642.02M

Ref : PC0642.026M

For KG 506 nassau panel.

For KG FP7 nassau panel.

For KG MK14 nassau panel.

1 2 3

High bracket Right PC0642.170 High bracket Left PC0642.171 Low bracket PC0642.172

1 2

High bracket PC0642.027 Low bracket PC0642.047

1 2

High bracket PC0642.026 Low bracket PC0642.175

l 2

1 1

MOUNTING PLATES KIT FOR KG 506 / FP7 / MK14 SPOILER

SPOILER BRACKET KIT

Ref : PC0613.202

Ref : PC0612.018

2 mounting plates for KG 506 / FP7 / MK14 spoiler. Delivered with screws. CIK/FIA approved.

For KG spoiler bracket. Delivered complete : 1 flange (2 pieces), 2 clamps, screws and bolts. CIK/FIA approved. 1 2

KG 506 / FP7 SPOILER BRACKETs

kg mk14 SPOILER BRACKETs

Ref : PC0612.03M

Ref : PC0611.045M

For KG 506 / FP7 spoiler.

For KG MK14 spoiler.

1 2

Steel spoiler clamps (2pces) PC0612.106 Spoiler flange (2pces) PC0612.038

Upper spoiler bracket PC0612.033 Lower spoiler bracket PC0612.035

1 2

Upper spoiler bracket PC0612.037 Lower spoiler bracket PC0612.036

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

KG 506 SIDE POD BLACK

KG MK14 SIDE POD BLACK

Ref : PC0633.047

Ref : PC0633.47M

Identical right and left side pods.

1 2

KG 506 SIDE POD BRACKET

1 2

KG MK14 SIDE POD BRACKET

Ref : PC0631.25M

Left PC0633.471 Right PC0633.472

Ref : PC0631.18M

Left PC0631.253 Right PC0631.254

1 2

Left PC0631.188 Right PC0631.189

BUSH SLEEVE FOR SIDE POD BRACKET

Ref : PC0632.020T 2

Plastic bush sleeve for side pods brackets. 2 choices : Ref : PC0632.020 : For standard assembly of side pods brackets(soft bush sleeve). Ref : PC0632.068 : For an assembly more rigid of side pods brackets (hard bush sleeve). Sold individually. 1 2

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

Soft bush sleeve PC0632.020 Hard bush sleeve PC0632.068

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

CHASSIS PARTS

Bodywork a

KG CIK PLASTIC REAR BUMPER

KG TRIS REAR BUMPER

Ref : PC0621.131

Ref : PC0642.14M

Mounted using mounting kit Ref : PC0622.325

Mounted using mounting kit (Ref : PC0622.329). Width adjustable from 1000 mm to 1170 mm. Complete assembly : central section, side section (x2) and screws and bolts.

1 2 3

Complete assembly PC0621.140 Central section PC0621.141 Side section (x1) PC0621.142

BUMPER MOUNTING KIT

Ref : PC0622.28D

KG CIK REAR BUMPER MOUNTING KIT

KG TRIS REAR ADJUSTABLE BUMPER MOUNTING KIT

Ref : PC0622.325

Ref : PC0622.329

For KG CIK rear bumper Ref : PC0621.131.

For KG TRIS rear bumper Ref : PC0621.14M.

For KG rear bumpers Refs : PC0621.131 or PC0621.14M. Sold individually. Available in 28 mm, 30 mm and 32 mm. 1 2 3

Diameter 28 mm PC0622.284 Diameter 30 mm PC0622.303 Diameter 32 mm PC0622.326

1 3

FIXING KIT NUMBER PLATE FOR DD2

DD2 REAR PROTECTION

Ref : PC0642.009

Ref : PC0681.10M

Used to fix the number plate on a DD2 go kart. Kit containing : 2 hose clamps, 2 screws and 2 nuts.

Available : Complete assembly with screws and bolts or in spare parts : Central tube to be cut according to the width of your chassis (sold individually); Tyre protection (sold individually). 1 2 3

Complete assembly PC0681.108 Central tube PC0681.106 Tyre protection PC0681.110

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

l k

RR ENCLOSING CHAIN GUARD

KG ADJUSTABLE CHAIN GUARD

KZ CHAIN GUARD

Ref : PC0651.010

Ref : PC0651.032

Ref : PC0651.037

Essential for safety. Protects against flying grease and reduces noise. Sold with elastic securign strap.

One-piece. Adapts to all chassis types without modification. Chain guard elastic not required.

KZ chainguard less cumbersome than a standard chainguard. Delivered with his screws kit.

RR CHAIN GUARD ELASTIC

KG CHAIN GUARD ELASTIC

ROTAX MAX CHAIN PROTECTION COVER

Ref : PC0652.000

Ref : PC0652.001

Ref : PMFR383.012

For RR chain guard.

For KG chain guard.

Chain protection cover for all engines of the Rotax 125 Max engine range. It protects radiator of projections and reinforces security.

1 2

2 3

TEKNEEX D28MM FRONT STABILIZER FOR FRAME

TEKNEEX D30MM FRONT STABILIZER FOR FRAME

FLANGE FOR FRAME STIFFENER

Ref : PC0622.527M

Ref : PC0622.530M

Ref : PC0622.525D

TEKNEEX front stabilizer for frame. Length : 230 mm. Diameter : 28 mm

TEKNEEX front stabilizer for frame. Length : 277 mm. Diameter : 30 mm

2 Diameters : For tubes diameter 28 mm For tubes diameter 30 mm. Delivered with screws and washers.

1 2 3

Flat steel (soft) PC0622.527 Round plast. Black (medium) PC0622.528 Round steel (hard) PC0611.108

1 2

3 4

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

Flat steel (soft) PC0622.530 Round plast. Black (medium) Diam : 25 mm in the middle / 30 mm at the ends (soft - medium) PC0622.533 Round plast. Black (medium) PC0622.532 Round steel (hard) PC0622.531

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

CHASSIS PARTS

Seats and accessories

TEKNEEX RACING POLYESTER SEAT

SEATS DIMENSIONS Find all seats dimensions on page 47.

TEKNEEX ELITE fiber SEAT - SOFT

Ref : PC0141.04T

Ref : PC0141.19T

Polyester seat medium rigidity with flat bottom (for Mini, 1, 1+, 2, 3, 4 sizes) specially designed to meet competition requirements.

Fiber seat - High quality supple rigidity with flat bottom specially designed to meet competition requirements.

Sizes : BABY PUFFO - BABY - MINI - 1 (MS) - 1+ (M) - 2 (ML) - 3 (L) - 4 (XL)

TILLETT T11 seat

Sizes : XXS - XS - 1 (MS) - 2 (M) - 3 (L) - 4 (XL) / Colour : Silver

TILLETT T8 1/4 COVERED SEAT

TILLETT T7 COVERED SEAT

Ref : PC0141.186T / PC0141.165T / PC0141.171

Ref : PC0141.15T

Ref : PC0141.10T

Polyester competition and leisure seat.

Polyester competition and leisure seat. Lateral padded for better support for the driver.

Polyester competition and leisure seat. Fully padded for maximum comfort.

T11 VG Newstyle : Sizes : XS - S - MAN - MS - ML - L / Soft T11 VG Handmade : Sizes : S - MAN - MS - ML - L / Soft

Sizes : S - MS - ML - L - XL / Rigidity : Medium

Sizes : XS - S - MS - ML - L - XL - XXL / Rigidity : Medium

T11 Handmade : Size : MAN / Medium T11 VG Newstyle T11 VG Handmade T11 Handmade

PC0141.186T PC0141.165T PC0141.171

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

MEKAONE SEAT PADS KIT

SEAT PADS KIT

SELF-ADHESIVE FOAM FOR SEAT

Ref : PC0143.019

Ref : PC0143.018

Ref : PC0143.001

Ergonomic pads made with high shock-absorbency EPDM foam 8 mm thickness. The Set pads are made to obtain optimum conditions in seat sitting. High quality back self adhesive Velcro, reusable and adjustable. The pads kit includes complete kit ribs, hips and dorsal.

This padding kit is suitable for any type of uncovered kart seat. The 8mm thick, mouldable foam pads have a self adhesive back for an easy fit.

Set of two pieces of protective foam to cut out and glue onto the insides of the seat.

FLATHEAD SCREW FOR SEAT

SEAT PROTECTION PLATES

ALUMINIUM REINFORCING SEAT WASHERS

Ref : PC0143.034

Ref : PC0143.002

Ref : PC0142.011

Flathead screw for seat.Dimensions: M8x25mm. Head D.30mm H.2mm CNC.Sold individually.

Set of two plates for rivetting to the outer sides of the seat to reinforce the mounting and prevent the polyester from shattering.

Set of two aluminium washers for reinforcing seat.To be fixed on the outer sides of the seat.

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

Outside diameter : 45 mm / Thickness : 1.5 mm

NEED SOME HELP ? +33 (0)2 40 38 26 20

CHASSIS PARTS

Seats and accessories

SEAT SECURING KIT

TEFLON SEAT SPACERS

POLYESTER REPAIR KIT

Ref : PC0142.012

Ref : PC0142.007

Ref : AC677.001

Set of stackable washers of various thicknesses, allowing an increased range of adjustment combinations presenting no mounting problems.

Set of shims of various thicknesses for adjusting your seat.

For repairing your seats.

Kit containing : · 8 washers 7mm, Ø 50mm · 4 washers 4mm, Ø 50mm · 4 bevelled washers 3 to 2mm, Ø 50mm · 2 screws 60mm

· 2 screws 45mm · 2 screws 30mm · 4 cup washers, Ø 30mm · 4 nuts Nylstop · 4 plain washers

Kit containing : · 10 spacers. 1mm, Ø 30mm

· 10 spacers. 5mm, Ø 30mm · 4 spacers. 10mm, Ø 30mm

e d f

g i

TEKNEEX ADJUSTABLE SEAT STIFFENER

Ref : PC0144.03L

TEKNEEX FLAT SEAT STIFFENER

Ref : PC0144.005L

Delivered with screws.

Lengths : 261 mm - 281 mm - 301 mm - 316 mm - 341 mm

TEKNEEX CURVED SEAT STIFFENER

Ref : PC0144.009L Lengths : 261 mm - 281 mm - 301 mm - 316 mm - 341 mm

2 models available: From 233 mm to 292 mm - From 273 mm to 332 mm g

TEKNEEX ADJUSTABLE SEAT STIFFENER FOR KZ

TEKNEEX SEAT STIFFENER FOR DD2

STIFFENER BRACKET

Ref : PC0144.032

Ref : PC0144.026

Ref : PC0144.024

TEKNEEX adjustable seat stiffener for KZ chassis. Delivered with screws.

TEKNEEX seat stiffener for DD2 chassis.Directly fitted on engine. Delivered with screws.

Allows to fix several stiffeners on the bearing cage. Delivered with screws.

Lengths : From 238 mm to 287 mm.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

CHASSIS PARTS

SEATS DIMENSIONS

Reference

TEKNEEX RACING Polyester PC0141.04T

TEKNEEX ELITE soft fiber PC0141.19T

SIZES IN CENTIMETERS Indicative sizes, non-blinding. Dimensions seats tolerance : +/- 0.5 cm

Size

A B C D E

BABY PUFFO BABY MINI T1 (MS) T1+ (M) T2 (ML) T3 (L) T4 (XL)

23 26 27,5 29 30,5 31,5 32,5 34

26 30 30 32 34 35 37 38,5

35,5 38 39 41,5 44,5 43 45 44

8 6 10,5 10,5 9,5 11 11 10,5

24 26 30,5 31,5 35 34 33 32,5

XXS XS T1 (MS) T2 (M) T3 (L) T4 (XL)

25 27,5 29 31 32 34

26 30 31,5 34,5 36,5 38,5

37 39 42 44 44 44

8,5 10,5 10,5 9,5 9,5 11

25,5 30,5 32 34 34 32,5

Reference

Size

A B C D E

MAN

31 34,5 44 10,5 31,5

S MAN T11 VG handmade MS PC0141.165T ML L

29,5 31,5 42,5 10 31 31 34,5 44 10,5 31,5 31,5 34,5 45 9 33,5 32,5 36 46 10 33,5 35 37,5 45,5 10 32,5

T11 handmade PC0141.171

XS 27,5 S 29,5 31 T11 VG NEW STYLE MAN MS 32 PC0141.186T ML 32,5 L 35

T7 covered seat PC0141.10T

40,3 42,5 44 45 46 45,5

9,5 10 10,5 9 10 10

28 30 44 9 30 31,5 46,5 9 31 32,5 48 9 33 34,5 49 9 35 37 50,5 9

S MS T8 1/4 covered seat ML PC0141.15T L XL

29,5 31,5 34,5 34,5 36 37,5

30 31 31,5 33,5 33,5 32,5 37 37,5 38 39,5 40

25,5 25,5 40,5 9 32,5 28 30,5 44 9 37 30 32 46,5 9 37,5 31 33 48 9 38 32,5 36 48,5 9 39,5 34 37,5 50,5 9 40 38 41 52 9,5 39

XS S MS ML L XL XXL

A E

D C

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

CHASSIS PARTS

STEERING WHEELs Ø 32mm

Ø 320 mm

Ø 32mm

Ø 345 mm

STANDARD SODI RACING STEERING WHEEL

Ø 340 mm

LARGE DIAMETER SODI RACING STEERING WHEEL

MYCHRON 5 STEERING WHEEL

Ref : PC0431.064

Ref : PC0431.059

Ref : PC0431.073

Sodi factory steering wheel (diameter 320 mm). Aluminium manufacturing with alcantara and grip to enhance comfort. Sodi embroidery on top. Colour : Black. Weight : 490 g.

Large diameter steering wheel (345 mm) specially designed for an easier driving. Perfect for all young drivers. Aluminium manufacturing with alcantara and grip to enhance comfort. Sodi embroidery on top. Colour : Black. Weight : 530 g.

Official AIM steering wheel for perfect integration and ideal protection for your MyChron 5 - 5/2T. Diameter : 340 mm. Bracket included in the kit. Colour : Black. Weight: 600 g.

Ø 32mm

Ø 320 mm d

BOX'S PLAIN STEERING WHEEL

Ref : PC0431.112

Alcantara-covered plain steering wheel. Aluminium manufacturing. Colour : black. Weight: 530 g.

KZ CLUTCH LEVER KIT

BOX'S STEERING WHEEL COVER

Ref : AC645.001

Protects your steering wheel against rain and dust. 100% Polyester with PVC Coated. Very easy to fit on a standard steering wheel or large diameter steering wheel.

STEERING WHEEL-MOUNTED ACCELERATOR KIT

GEAR SHIFT KNOB

Ref : PC0441.028

Ref : PC0432.020

Ref : PC0441.024

Fits all types of steering wheel bracket. Adjusting screw for adjusting the clearance. Ergonomic handle. Beautiful titanium anodized finish.

This kit fits all types of chassis. It allows you to accelerate from the steering wheel. Delivered without sheath and cable.

Inside diameter : 18 mm. Beautiful finish.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

Steering wheel-operated front brake option

COMPLETE STEERING WHEEL-MOUNTED CONTROL KIT

Ref : PC0432.025

This complete kit of steering wheel-mounted controls allows the driver to control the accelerator and rear brake by hand. Very high quality and finish. Delivered with the hose and master cylinder but without the steering wheel and its yoke. Compatible with steering wheel-operated front brake option.

Standard

SHIM FOR STEERING WHEEL

TEKNEEX STEERING WHEEL SUPPORT 3 POSITIONS

Ref : PC0432.012

Ref : PC0412.09T

Angled shim of 8°.

Tekneex anodized aluminium steering wheel support tilting to 10°, 20° or 30°. Delivered with nuts and bolts.

ANGLED STEERING WHEEL BRACKET

Offset

STRAIGHT STEERING WHEEL BRACKET

2 models available : - Standard - Offset (less effort to the direction is required Ideal for kids).

SHORT STRAIGHT STEERING WHEEL BRACKET

Ref : PC0432.003

Ref : PC0432.013

Ref : PC0432.010

Allows you to angle the position of the steering wheel (10 °). For 20 mm diameter tube.2 fixing holes.

Straight steering wheel bracket for 20 mm diameter tube. 2 fixing holes.

Short straight steering wheel bracket for 20 mm diameter tube. 1 fixing hole.

Colour : Aluminium

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

Colour : Aluminium

CONTACT THE NEARESt ITAK ASHOP STORE

Colour : Titanium

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

CHASSIS PARTS

Wheel rims

magnesium wheels

212 mm

130 mm

180 mm

MAG 130 DWT FRONT WHEEL RIM

(STUB AXLE-MOUNTED)

MAG 212 DWT REAR WHEEL RIM

Ref : PC0261.160

Ref : PC0261.059

For 17 mm diameter stub axle. Delivered with valve, gripsters and bearings.

High volume wheel rim. Ensures good grip to the chassis. Delivered with valve and gripsters.

Weight : 637 g b

Weight : 590 g

MAG 130 DWT FRONT WHEEL RIM

(HUB-MOUNTED)

MAG 180 DWT REAR WHEEL RIM

Ref : PC0261.159

Ref : PC0261.058

High volume wheel rim. Ensures good grip to the chassis. Delivered with valve and gripsters.

Very effective wheel rim with rain tyres. Delivered with valve and gripsters.

Weight : 466 g

Weight : 520 g

130 mm

212 mm

Low volume wheel rim

MAG 130 DWT light FRONT WHEEL RIM

MAG 212 DWT â&#x20AC;&#x2030;light REAR WHEEL RIM

Ref : PC0261.165

Ref : PC0261.065

Low volume wheel rim. It allows you to free the chassis and provide a high level of grip. Delivered with valve and gripsters.

Low volume wheel rim. It allows you to free the chassis and increase the motive power with a high level of grip. Delivered with valve and gripsters.

Weight : 390 g

(HUB-MOUNTED)

Weight : 527 g

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

aluminium wheels

ALU 130 DWT FRONT WHEEL RIM

(STUB AXLE-MOUNTED)

130 mm

Ref : PC0261.129

For 17 mm diameter stub axle. Delivered with valve, gripsters and bearings. Weight : 813 g

120 mm

130 mm

ALU 120 DWT FRONT WHEEL RIM

(HUB-MOUNTED)

ALU 130 DWT FRONT WHEEL RIM

Ref : PC0261.127

Ref : PC0261.128

Delivered with valve and gripsters.

Delivered with valve and gripsters. Weight : 521 g

180 mm

210 mm

Weight : 478 g

(HUB-MOUNTED)

ALU 180 DWT REAR WHEEL RIM

ALU 210 DWT REAR WHEEL RIM

Ref : PC0261.018

Ref : PC0261.019

Delivered with valve and gripsters.

Weight : 642 g

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

Weight : 805 g

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

CHASSIS PARTS

Wheel rims

aluminium wheels

150 mm

115 mm

150 mm

ALU 115 SUPER T6 FRONT WHEEL RIM (STUB AXLE-MOUNTED)

ALU 150 T6 REAR WHEEL RIM

Ref : PC0261.016

Very effectif when mounted at the front of Minikart chassis. For 17 mm diameter stub axle. Delivered with valve and bearings.

Very efficient when mounted at the rear of Minikart chassis. Delivered with valve.

Weight : 655 g b

Weight : 555 g

ALU 115 BLACK FRONT WHEEL RIM

(HUB-MOUNTED)

ALU 150 BLACK REAR WHEEL RIM

Ref : PC0261.120

Ref : PC0261.020

Delivered with valve.

Weight : 820 g

Ref : PC0261.116

Weight : 650 g

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

b c

Top Quality

Ideal for wheel balancing

g e

LEAD finger

Ref : AC652.001

DIAMETER 17 MM FRONT WHEEL BEARING

Ref : PC0262.006

Ideal for wheel balancing. c

FLAT-HEADED GRIPSTER

O-RINGS KIT FOR FLAT-HEADED GRIPSTER

Ref : PC0263.105

Ref : PC0263.021

Flat-headed M5 stainless steel gripster. Tightened using an Allen key. Delivered with gaskets. Fits on all wheels with gripsters. Sold individually.

O-rings for flat-headed M5 stainless steel gripsters (Ref : PC0263.105). Bag of 12 O-rings.

SET OF 3 GRIPSTERS

Ref : PC0263.004

Ref : PC0263.100

Gripsters for M5 aluminum or M5 magnesium wheel rims. Manual tightening. Delivered with gaskets.

Gripsters for M5 aluminum or M5 magnesium wheel rims. Manual tightening or with Allen key. Delivered with gaskets.

O-RINGS KIT FOR SET OF 3 GRIPSTERS

M8 NUT

Ref : PC0263.020

Ref : B2.08D

O-rings for gripsters for M5 aluminum or magnesium wheel rims (Refs : PC0263.004 and PC0263.100). Bag of 12 O-rings.

Blocking nut BDR M8. Sold individually.

M8 ANODIZED BARREL NUT

SET OF 6 M8 FLANGED NUT

Ref : PC0263.10C

Ref : PC0263.102

Nut with optimum grip for perfect tightening. A touch of discretion or fun to put onto your wheels. Sold individually.

Nylstop self-locking nuts M8.

Colours : Black - Silver

KIT OF 4 SKR WHEEL STICKERS

Ref : AC701.041 k

TUBELESS VALVE

Kit of 4 Sodi Kart Racing adhesive stickers. To stick directly on the rim.

Ref : PC0264.00L

Available : Short tubeless valve and standard tubeless valve.

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

Colours : Orange Fluo - Black and White

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

CHASSIS PARTS

hubs

TEKNEEX D25 3-HOLEs ALUMINIUM FRONT HUB

Ref : PC0252.04L

Tekneex titanium finish aluminium front wheel hub, for fitting to 25 mm diameter stub axle. Delivered with studs, bearings and hub centering device. Length 60 mm (385 g) Length 80 mm (415 g)

PC0252.047 PC0252.048

HUB CENTERING DEVICE

Length 90 mm (430 g) Length 110 mm (440 g)

PC0252.051 PC0252.049

D25 FRONT WHEEL BEARING

Ref : PC0253.007

Ref : B9.6905-ZZ

Hub centering device without o-ring. Fits to Tekneex front wheel hub for 25 mm diameter stub axle.

Fits to front wheel hub for 25 mm diameter stub axle.

D17 ALUMINIUM FRONT HUB

Ref : PC0252.01L

Machined aluminium front wheel hub. Beautiful Gold finish. For fitting to 17 mm diameter stub axle. Not compatible with front braking systems. Delivered with studs and bearings. Length 55 mm (325 g)

PC0252.018

Length 70 mm (365 g)

PC0252.019

Length 90 mm (385 g)

PC0252.020

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

TEKNEEX D25 ALUMINIUM REAR HUB

TEKNEEX D30 ALUMINIUM REAR HUB

Ref : PC0252.008L

Ref : PC0252.30L

Tekneex titanium finish aluminium rear wheel hub. For 25 mm diameter shaft, 6 mm woodruff key. Delivered with studs and screws.

Tekneex titanium finish aluminium rear wheel hub. For 30 mm diameter shaft, 6 mm woodruff key. Delivered with studs and screws.

Length 50 mm (285 g) Length 85 mm (425 g)

PC0252.008 PC0252.258

Length 50 mm (300 g) Length 70 mm (368 g) Length 98 mm (408 g)

PC0252.304 PC0252.305 PC0252.042

TEKNEEX D40 ALUMINIUM REAR HUB

Ref : PC0252.422L

Tekneex titanium finish aluminium rear wheel hub. For 40 mm diameter shaft, 8 mm woodruff key. Delivered with studs and screws.

Length 60 mm (280 g) Length 80 mm (330 g) Length 105 mm (370 g)

PC0252.422 PC0252.423 PC0252.424

hub seat / shaft : 29 mm hub seat / shaft : 39 mm hub seat / shaft : 39 mm

TEKNEEX D50 ALUMINIUM REAR HUB

Ref : PC0252.516L

Tekneex titanium finish aluminium rear wheel hub. For 50 mm diameter shaft, 8 mm woodruff key. Delivered with studs and screws. Length 70 mm (300 g) Length 70 mm (315 g) Length 90 mm (345 g) Length 90 mm (360 g) Length 100 mm (365 g)

PC0252.517 PC0252.526 PC0252.516 PC0252.528 PC0252.527

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

hub seat / shaft : 35 mm hub seat / shaft : 49 mm hub seat / shaft : 39 mm hub seat / shaft : 61 mm hub seat / shaft : 39 mm

CONTACT THE NEARESt ITAK ASHOP STORE

Length 100 mm (370 g) Length 100 mm (355 g) Length 120 mm (490 g) Length 150 mm (560 g)

SHIPMENTS WITHIN 24H (see the practical guide page 4)

PC0252.519 PC0252.525 PC0252.518 PC0252.520

hub seat / shaft : 88 mm hub seat / shaft : 49 mm hub seat / shaft : 98 mm hub seat / shaft : 128 mm

NEED SOME HELP ? +33 (0)2 40 38 26 20

CHASSIS PARTS

hubs

D30 ALUMINIUM REAR HUB

Ref : PC0252.301L

Machined aluminium rear wheel hub. Beautiful Gold finish. For 30 mm diameter shaft, 6 mm woodruff key. Delivered with studs and screws. Length 61 mm (345 g)

PC0252.301

Length 92 mm (440 g)

PC0252.302

Length 114 mm (530 g)

PC0252.303

D40 ALUMINIUM REAR HUB

Ref : PC0252.401L

Machined aluminium rear wheel hub. Beautiful Gold finish. For 40 mm diameter shaft, 8 mm woodruff key. Delivered with studs and screws. Length 70 mm (350 g)

PC0252.402

Length 92 mm (420 g)

PC0252.403

Length 114 mm (545 g)

PC0252.404

D50 ALUMINIUM REAR HUB

Ref : PC0252.501L

Machined aluminium rear wheel hub. Beautiful Gold finish. For 50 mm diameter shaft, 8 mm woodruff key. Delivered with studs and screws. Length 72 mm (410 g) Length 82 mm (435 g)

PC0252.501 PC0252.502

Length 92 mm (505 g) Length 114 mm (630 g)

PC0252.503 PC0252.504

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

D40 MAGNESIUM REAR HUB

D50 MAGNESIUM REAR HUB

Ref : PC0252.412L

Ref : PC0252.511L

Magnesium rear wheel hub. For 40 mm diameter shaft, 8 mm woodruff key. Delivered with studs and screws.

Magnesium rear wheel hub. For 50 mm diameter shaft, 8 mm woodruff key. Delivered with studs and screws.

Length 70 mm (250 g) Length 114 mm (395 g)

PC0252.412 PC0252.414

For wheel rims with little room between the stud and the side.

FRONT HUB SPACER

HUB STUB

Ref : PC0253.003

Ref : PC0253.008

STUB AXLE SPACER

Ref : PC0213.00T

Lenght : 36mm. Inside diameter : 25mm. j

PC0252.511 PC0252.512 PC0252.513 PC0252.514

SET OF 6 M8 BARREL NUTS

Ref : PC0263.101

Length 72 mm (300 g) Length 82 mm (320 g) Length 92 mm (345 g) Length 114 mm (480 g)

Stub axle Ø 25 mm : thick 5 or 15 mm Stub axle Ø 17 mm : thick 5 or 10 or 17 mm

SET OF 24 SHIMS FOR D50 HUB

STUB AXLE RING CENTERING DEVICE D25 M14

Ref : PC0253.009

Ref : OU931.010

Allows the rear track width to be quickly adjusted and prevents the hub from moving towards the centre of the shaft.

Stub axle ring centering device for 25 mm diameter stub axle with M14 nut. Tool specially designed to make it easier to install hub rings by sliding them into place.

24 plastic shims Kit : · 2 x 5 mm · 2 x 7 mm · 2 x 8 mm · 2 x 10 mm

· 2 x 12 mm · 2 x 15 mm · 2 x 18 mm · 2 x 20 mm

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

· 2 x 22 mm · 2 x 25 mm · 2 x 27 mm · 2 x 30 mm CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

CHASSIS PARTS

shafts & WOODRUFFs keys a

Tekneex hollow shafts

Type

Standard 1040 TS20 - Flexible 1040 TMS20 - Flexible / Medium 1040 TMS20 - Flexible / Medium - with inner sleeve for KZ 1040 TM20 - Medium 1040 TM20 - Medium - with inner sleeve for KZ 1040 THM20 Medium / Hard 1040 TH20 - Hard 1040 THH20 - Extrahard 1040 TS25 - Flexible 1040 TH25 - Hard 1040 TH30 - Very Hard 1040

MD20 - Flexible MD25 - Medium MD30 - Hard

TS30 - Flexible TM30 - Medium TH30 - Hard Medium

A B C D Reference mm

B C D A

mm mm 128 - 250,5 327,5 250,5 327,5 250,5 327,5 250,5 327,5 250,5 327,5 250,5 327,5 250,5 327,5 250,5 327,5 250,5 327,5 250,5 327,5 250,5 327,5 1040 128,5 - 1040 128,5 - 1040 128,5 - 960 228 - 960 228 - 960 228 - 950 213 327

mm 240 PC0271.540 120 PC0271.532 120 PC0271.544 120 PC0271.545 120 PC0271.533 120 PC0271.546 120 PC0271.547 120 PC0271.534 120 PC0271.538 120 PC0271.536 120 PC0271.535 120 PC0271.537 250,5 PC0271.415 250,5 PC0271.416 250,5 PC0271.417 103 PC0271.309 103 PC0271.310 103 PC0271.311 86 PC0271.306

4 1

2 3

WOODRUFF KEYS WITH PINS

designation

1 With pins 8 (x2) 8x3x60 2 With pins 8 (x3) 8x3x60 3 With pins 6 (x2) 8x3x50 4 With pins 8 (x3) 8x3x75

A B C D Reference numbr of pins diam. pins

2 3 2 3

7,45 mm 7,45 mm 6 mm 7,45 mm

width

8 mm 8 mm 8 mm 8 mm

center dist

34 mm 17 mm 30 mm 24 mm

PC0273.026 PC0273.033 PC0273.008 PC0273.035

DIAMEtEr 50 REAR AXLE REINFORCEMENT

WOODRUFF KEYS WITHOUT PINS

designation Woodruff 6x6 L40 Woodruff 6x5 L50 Woodruff 6x6 L50 Woodruff 8x5 L50 Woodruff 6x6 L70 Woodruff 6x6 L80

A B C Reference width

6 mm 6 mm 6 mm 8 mm 6 mm 6 mm

height

6 mm 5 mm 6 mm 5 mm 6 mm 6 mm

length

40 mm 50 mm 50 mm 50 mm 70 mm 80 mm

PC0273.024 PC0273.005 PC0273.020 PC0273.016 PC0273.030 PC0273.036

REAR AXLE REINFORCEMENT TOOL

Ref : PC0275.050

Ref : OU956.002

This axle reinforcement has been designed and developed to prevent rear axle deformation (diameter 50, flexible and medium model) when locking the sprocket carrier. It requires a specific assembly tool (Ref : OU956.002).

This accessory is dedicated for the assembly and the dismantling of the rear axle reinforcement (Ref : PC0275.050).

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

CHASSIS PARTS

Roller bearings Ceramic

a Steel

SKF HIGH-PERFORMANCE REAR AXLE BEARING

REAR AXLE BEARING

Ref : PC0274.020M

Ref : PC0274.01M

The SKF high-performance roller bearing has been specially-designed for racing. It allows the shaft to be well tightened and centred in the middle of the bearing. Its profile avoids the risk of misalignment during the race. Its advantages are : its ease of assembly and disassembly; its accurate shaft guidance; its low friction; its ease of cleaning and re-greasing. Shaft diameter : 40mm or 50 mm. Bearing outside diameter : 80 mm.

Excellent quality. Allow the shaft rotation very freely.

25x52 25x62 30x62 40x80 50x80 50x90

PC0274.020 PC0274.048 PC0274.021

PC0274.009 PC0274.008 PC0274.012 PC0274.017 PC0274.050 PC0274.038

30 mm

34 mm

Steel balls D50/80 Steel balls D40/80 Céramic balls D50/80

Diameters : 25x52 - 25x62 - 30x62 - 40x80 50x80 - 50x90

75 mm 106 mm

SCREW FOR REAR AXLE BEARING

BEARING HOLDER

Ref : PC0274.04M

Screw replacement for rear axle bearing. PC0274.049 Diameter 6 : For rear axle bearing Ø 25x52 (Ref : PC0274.009) For rear axle bearing Ø 25x62 (Ref : PC0274.008) For rear axle bearing Ø 30x62 (Ref : PC0274.012)

Solid machined aluminium holder. The carriage's inside diameter corresponds to the bearing's outside diameter. Delivered with screws. Diameter : 62 or 80 mm. Diameter 62 mm Diameter 80 mm

PC0275.054 PC0275.061

PC0274.052 Diameter 8 : For rear axle bearing Ø 50x80 (Ref : PC0274.050) For rear axle bearing Ø 50x90 (Ref : PC0274.038) PC0274.033 Diameter 8 : For rear axle bearing Ø 40x80 (Ref : PC0274.017)

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

CHASSIS PARTS

transmissions

chains grease Find all chains grease on page 124.

Chains

ROTAX PREMIUM CHAIN

without o-rings

ROTAX PREMIUM O-RING CHAIN

Ref : TR214.T

Ref : TR215.T

High-quality chain developed by ROTAX with excellent tensile strength and wear. Suits all karts without gearboxes and specially to the Rotax Max engine, it reduces the power losses and increases efficiency. Chain with a 7.774 pitch (type 219).

O-ring chain developed by ROTAX with excellent tensile strength and wear. Suits all karts without gearboxes and specially to the Rotax Max engine, it reduces the power losses and increases efficiency. This chain with o-rings is used to seal the grease and increase its lifetime. Chain with a 7.774 pitch (type 219).

Sizes : 96 to 112 links

Sizes : 98 to 112 links

96 98 100

TR214.096 TR214.098 TR214.100

102 104 106

TR214.102 TR214.104 TR214.106

RK GB 219 KR CHAIN

108 110 112

TR214.108 TR214.110 TR214.112

98 100 102

without o-rings

TR215.098 TR215.100 TR215.102

104 106 108

RK BB 219 KRO CHAIN

TR215.104 TR215.106 TR215.108

110 112

TR215.110 TR215.112

with o-rings

Ref : TR216.T

Ref : TR220.T

Suits all karts without gearboxes. Chain with a 7.774 pitch (type 219).

Replacing the KRO Black & Black, the RK o-ring chain (KRO Blue & Blue) is currently the Reference for high level competitions. Suits all karts without gearboxes. Chain with a 7.774 pitch (type 219).

Sizes : 96 to 112 links 96 98 100

with o-rings

TR216.096 TR216.098 TR216.100

102 104 106

TR216.102 TR216.104 TR216.106

Sizes : 96 to 112 links 108 110 112

TR216.108 TR216.110 TR216.112

96 98 100

TR220.096 TR220.098 TR220.100

102 104 106

TR220.102 TR220.104 TR220.106

108 110 112

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

TR220.108 TR220.110 TR220.112

DID 219 DHA CHAIN

without o-rings

DID 219 V2 SDH CHAIN

with o-rings

Ref : TR217.T

Ref : TR213.T

Excellent strength. Suits all karts without gearboxes. Chain with a 7.774 pitch (type 219).

Latest generation of chains with o-rings, the V2 SDH offers a very high level of reliability. Suits all karts without gearboxes. Chain with a 7.774 pitch (type 219).

Sizes : 96 to 112 links 96 98 100

TR217.096 TR217.098 TR217.100

102 104 106

TR217.102 TR217.104 TR217.106

Sizes : 96 to 112 links 108 110 112

TR217.108 TR217.110 TR217.112

96 98 100

TR213.096 TR213.098 TR213.100

102 104 106

TR213.102 TR213.104 TR213.106

108 110 112

TR213.108 TR213.110 TR213.112

DID 428VX CHAIN 54 LINKS

with o-rings

REGINA 126RH CHAIN

without o-rings

Ref : TR218.554

Ref : TR219.00T

Chain with o-rings. For 125cc gokart with gearboxes. Very high strength. Delivered with clip link. Chain with a 12.7 pitch.

Chain for 125 gokart with gearboxes. Long life. Used by most racing teams. Sizes: 54 links (delivered with clip link) or per meter (delivered without clip link). Chain with a 12.7 pitch.

size : 54 links

Sizes : 54 links / per meter 54

CLIP LINK FOR DID 428VX CHAIN

Ref : TR219.006

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

TR219.007

Per meter

TR219.009

CLIP LINK FOR REGINA 126RH CHAIN

Ref : TR219.002

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

CHASSIS PARTS

transmissions

Sprockets

Top Quality

ANODIZED PERFORATED SPROCKET

SPECIAL HIGH-PERFORMANCE SPROCKET

Ref : TR221.0T

Ref : TR221.1T

Specially treated and anodized. For standard chain type 219.

Very high quality finish for very long life. For standard chain type 219.

Sizes : 65 to 91 teeth

Sizes : 64 to 90 teeth

Top Quality

MEKAONE SPROCKET PROTECTION KIT

125CC ERGAL REAR SPROCKET

125CC ALUMINIUM REAR SPROCKET

Ref : PC0682.011

Ref : TR242.22T

Ref : TR242.24T

MEKAONE sprocket protection kit of 200 mm diameter (FFSA regulation). Included in the kit : 2 aluminium sprocket protection, 1 plastic spacer (thickness: 8 mm), 6 screws, 6 nuts.

In two parts. 50 mm diameter. For chain with a 12.7 pitch.

In two parts. Very high quality. 50 mm diameter. For chain with a 12.7 pitch.

ROTAX MAX ENGINE SPROCKET

Ref : PMFR382.00T

For TM KZ10B, KZ10 ES, KZ10C engine. For chain with a 12.7 pitch. Sizes : 15 to 20 teeth

Sizes : 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 teeth f

TM FINAL GEAR BOX ENGINE SPROCKET

Ref : TR251.11T

Standard piece. Excellent quality. For standard chain type 219. *Sprocket 11 teeth : Specific assembly with plain bearing Ref : PMFR415.001 and trust washer Ref : B3.P1019.

Sizes : 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 teeth h

ROTAX MAX CHAIN PROTECTION COVER

Ref : PMFR383.012

Chain protection cover for all engines of the Rotax 125 Max engine range. It protects radiator of projections and reinforces security.

Sizes : 11 - 12 - 13 - 14 - 15 - 16 teeth PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

CHASSIS PARTS

transmissions

Sprocket carriers

D40 ALUMINIUM SPROCKET CARRIER

Ref : PC0281.408

For 30 mm diameter shaft, 6 mm woodruff key (390 g). Delivered with nuts and bolts.

For 40 mm diameter shaft, 8 mm woodruff key (375 g). Delivered without nuts and bolts.

TEKNEEX D30 ALUMINIUM SPROCKET CARRIER

Ref : PC0281.300

TEKNEEX D50 ALUMINIUM SPROCKET CARRIER

D50 ALUMINIUM SPROCKET CARRIER

Ref : PC0281.506

Ref : PC0281.503

Very high quality finish. Colour: Titanium. For 50 mm diameter shaft, 8 mm woodruff key (385 g). Delivered complete with nuts and bolts.

For 50 mm diameter shaft, 8 mm woodruff key (415 g). Delivered without nuts and bolts.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

MAGNESIUM SPROCKET CARRIER

DAMPING SPROCKET CARRIER

Ref : PC0281.40D

Ref : PC0281.510

The lightness of magnesium. Delivered without nuts and bolts.

Extends the life of the sprocket. Recommended for endurance racing. For 50 mm diameter shaft. Delivered without nuts and bolts.

40 mm, 8 mm woodruff key (290 g) 50 mm, 8 mm woodruff key (310 g)

PC0281.406 PC0281.502

PREDATOR SPROCKET CARRIER

PIN FOR PREDATOR SPROCKET CARRIER

Ref : PC0281.50M

Ref : PC0282.001

This revolutionary sprocket carrier allows you to change your sprocket in record time. Simply turn the screw once.

Predator sprocket carrier spare part.

50 mm diameter for OK or OKJ class (reversed mounting) 50 mm diameter for Rotax class 30mm diameter

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

PC0281.505 PC0281.504 PC0281.306

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

CHASSIS PARTS

DISKS OF HYDRAULIC BRAKE

140 MM FRONT VENTILATED BRAKE DISK

142 MM FRONT VENTILATED BRAKE DISK

175 MM REAR VENTILATED BRAKE DISK

Ref : PC0341.223

Ref : PC0341.226

Ref : PC0341.229

For TEKNEEX brake F10 approved. Fits to 140 mm front brake disk carrier Ref : PC0343.009.

For TEKNEEX brake F13-F14G approved. Fits to 140 mm front brake disk carrier Ref : PC0343.009.

For TEKNEEX brake F15. Fits to disk carriers Refs : PC0291.261 / PC0291.314.

192 MM REAR VENTILATED BRAKE DISK

205 MM REAR VENTILATED BRAKE DISK

Ref : PC0341.224

Ref : PC0341.227

Ref : PC0341.228

For TEKNEEX brake F8-F10 approved. Fits to disk carriers Refs : PC0291.523 / PC0291.414.

For TEKNEEX brake F11-F13-F14DD-F14G approved. Fits to disk carriers Refs : PC0291.523/ PC0291.414.

For TEKNEEX brake F8-F10-F11-F13-F14DD-F14G approved. Fits to disk carriers Refs : PC0291.523 / PC0291.414.

brakes & cik approval

1 2 3 4

type of brake TEKNEEX F8 TEKNEEX F10 TEKNEEX F11 TEKNEEX F13

cik approval 97/FR/20 96/FR/20 022-B2-11 022-B4-45

use

Kart RACING without gear box Kart RACING with gear box & DD2 Kart RACING without gear box Kart RACING with gear box & DD2

5 6 7

type of brake TEKNEEX F14DD TEKNEEX F14G TEKNEEX F15

cik approval 022-B2-66 022-B4-90 -

use

Kart RACING without gear box (type Endurance) Kart RACING with gear box & DD2 Kart RACING Minime/Cadet class

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

CHASSIS PARTS

DISK CARRIERS OF HYDRAULIC BRAKE

D25 ALUMINIUM DISK CARRIER

D30 ALUMINIUM DISK CARRIER

Ref : PC0291.261

Ref : PC0291.314

For 168 mm or 175 mm diameter disk and 25 mm diameter shaft, 6 mm woodruff key. Delivered with nuts and bolts.

For 168 mm or 175 mm diameter disk and 30 mm diameter shaft, 6 mm woodruff key. Delivered with nuts and bolts.

D40 ALUMINIUM FLOATING DISK CARRIER

D50 ALUMINIUM FLOATING DISK CARRIER

Ref : PC0291.414

Ref : PC0291.523

For 192 mm or 205 mm diameter ventilated disk and 40 mm diameter shaft, 8 mm woodruff key. Delivered without disk mounting screws.

For 192 mm or 205 mm diameter ventilated disk and 50 mm diameter shaft, 8 mm woodruff key. Delivered without disk mounting screws.

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

CHASSIS PARTS

Brake calipers

MASTER CYLINDER

approved cik 2018/2020

TEKNEEX 4 PISTONS FRONT CALIPER D18

Ref : PC0311.044

Ref : PC0331.102

For TEKNEEX brake F11-F13-F14DD-F14G-F15 approved. For KZ-RS-DD2Furia. Brake fluid capacity : 16,2 ml.

TEKNEEX 4 pistons caliper D18 for TEKNEEX brake F13-F14G approved. Delivered without pads, split pin.

TEKNEEX 4 PISTONS REAR CALIPER D20

Ref : PC0331.104

Ref : PC0331.103

TEKNEEX 4 pistons caliper D20 for TEKNEEX brake F13 approved. With front brake, without piston screw adjustment. Delivered without pads, split pin, screws and springs.

TEKNEEX 4 pistons caliper D20 for TEKNEEX brake F11 approved. Without front brake, piston screw adjustment. Delivered without pads, split pin, screws and springs.

TEKNEEX 2 PISTONS REAR CALIPER D28

TEKNEEX 2 PISTONS REAR CALIPER D24

Ref : PC0331.105

Ref : PC0331.107

TEKNEEX 2 pistons caliper D28 for TEKNEEX brake F14DD-F14G approved. Delivered without pads, split pin.

TEKNEEX 2 pistons caliper D24 for TEKNEEX brake F15. Delivered without pads, split pin, screws and springs.

brakes & cik approval

1 2 3 4

type of brake TEKNEEX F8 TEKNEEX F10 TEKNEEX F11 TEKNEEX F13

cik approval 97/FR/20 96/FR/20 022-B2-11 022-B4-45

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

use

Kart RACING without gear box Kart RACING with gear box & DD2 Kart RACING without gear box Kart RACING with gear box & DD2

CONTACT THE NEARESt ITAK ASHOP STORE

5 6 7

type of brake TEKNEEX F14DD TEKNEEX F14G TEKNEEX F15

cik approval 022-B2-66 022-B4-90 -

SHIPMENTS WITHIN 24H (see the practical guide page 4)

use

Kart RACING without gear box (type Endurance) Kart RACING with gear box & DD2 Kart RACING Minime/Cadet class

NEED SOME HELP ? +33 (0)2 40 38 26 20

CHASSIS PARTS

Brake pads

approved cik 2018/2020

FRONT BRAKE PADS FOR TEKNEEX 4 PISTONS CALIPER D18

REAR BRAKE PADS FOR TEKNEEX 4 PISTONS CALIPER D20

Ref : PC0351.053T

Ref : PC0351.055T

For TEKNEEX brake F13-F14G approved. Total thickness = 5,5 mm. Set of 4 pads delivered with split pins. For TEKNEEX 4 pistons front caliper D18.

For TEKNEEX brake F8-F10-F11-F13 approved. Total thickness = 10 mm. Set of 2 pads delivered with split pin, screws and springs. For TEKNEEX 4 pistons rear caliper D20.

Mark "A" Mark "B"

PC0351.053 PC0351.054

Mark "C" Mark "D"

REAR BRAKE PADS FOR TEKNEEX 2 PISTONS CALIPER D24

PC0351.058 PC0351.060

Mark "A" Mark "B"

REAR BRAKE PADS FOR TEKNEEX 2 PISTONS CALIPER D28

PC0351.055 PC0351.056

Mark "C" Mark "D"

PC0351.059 PC0351.061

QUICK-RELEASE CLIP OF BRAKE PADS

Ref : PC0351.062T

Ref : PC0351.057

Ref : PC0335.045

For TEKNEEX brake F15. Total thickness = 10 mm. Set of 2 pads delivered with split pin, screws and springs. For TEKNEEX 2 pistons rear caliper D24.

For TEKNEEX brake F14DD-F14G approved. Total thickness = 10 mm. Set of 2 pads delivered without split pin. For TEKNEEX 2 pistons rear caliper D28.

Allows the quick replacement of brake pads Ref : PC0351.057 on the TEKNEEX 2 pistons rear caliper D28 Ref : PC0331.105.

Mark "A" Mark "B"

PC0351.063 PC0351.062

Mark "B"

PC0351.057

SPLIT PIN Ø 4 - L : 56 for 4 pistons front caliper D18 (front) Ø 5 - L : 71 for 4 pistons rear caliper D20 (rear) Ø 5 - L : 80 for 4 pistons rear caliper D24 (rear)

Ref : B5.04T Ref : B5.0456 Ref : B5.0571 Ref : B5.0580

2 3

PAD SECURING SCREWS Ref : PC0335.044 For TEKNEEX hydraulic brake. Sold individually. COMPRESSION SPRING Ref : PC0335.036 For TEKNEEX hydraulic brake. Sold individually.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

CHASSIS PARTS

Brake parts c

l b

k i m

BRAKE SAFETY CABLE with CONNECTOR

ADJUSTABLE SHEATH STOP

BRAKE LINKAGE

Ref : PC0711.003

Ref : PC0322.00L

Ref : PC0322.077

BRAKE SAFETY CABLE

Ref : PC0326.00L

Ref : PC0323.03T

For SIGMA For FURIA

DOUBLE BRAKE CABLE CLAMP

Ref : PC0711.042

Plastic adhesive CABLE GUIDE

Ref : PC0711.180

Available in : Ø Inside : 6 mm, short Ø Inside : 6 mm, long Ø Inside : 5 mm, long

CABLE CLAMP

PC0342.009 PC0342.008

OPEN SOCKET

Delivered with clip and yoke.

Ref : PC0326.006

dISK PROTECTOR

Ref : PC0342.00M

Ref : PC0321.00L

Diameters : 6,5 mm - 9,5 mm

Coulours : Black - Silver - Red

RUBBER LINED CLIPS

ANODIZED DOUBLE CABLE CLAMP

Ref : PC0711.08C

Lengths : 398 mm - 440 mm c

Lengths : 290 mm - 323 mm - 335 mm - 360 mm - 380 mm - 425 mm

Diameter : 6 mm

For FURIA.

Ideal for running cables. Quick and easy installation thanks to the adhesive backing. Material: Plastic.

BRAKE VENT

Ref : PC0683.012

For improved brake cooling. Fits all chassis.

ALUMINIUM ADHESIVE CABLE GUIDE

Ref : PC0711.181

Ideal for running cables. Quick and easy installation thanks to the adhesive backing. Material: Aluminum. brakes & cik approval

1 2 3 4

type of brake TEKNEEX F8 TEKNEEX F10 TEKNEEX F11 TEKNEEX F13

cik approval 97/FR/20 96/FR/20 022-B2-11 022-B4-45

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

use

Kart RACING without gear box Kart RACING with gear box & DD2 Kart RACING without gear box Kart RACING with gear box & DD2

CONTACT THE NEARESt ITAK ASHOP STORE

5 6 7

type of brake TEKNEEX F14DD TEKNEEX F14G TEKNEEX F15

cik approval 022-B2-66 022-B4-90 -

SHIPMENTS WITHIN 24H (see the practical guide page 4)

use

Kart RACING without gear box (type Endurance) Kart RACING with gear box & DD2 Kart RACING Minime/Cadet class

NEED SOME HELP ? +33 (0)2 40 38 26 20

CHASSIS PARTS

Tanks

d a

b c

3L Tank

Ref : PC0451.012

Delivered with tightening butterfly nut.

For tanks Refs : PC0451.004 and PC0451.010.

4,5L EXTRACTIBLE TANK

TANK FILLER CAP

Ref : PC0451.024

Ref : PC0453.004

Delivered with tightening butterfly nut.

For tanks Refs : PC0451.023, PC0451.024, PC0451.004 et PC0451.010. Delivered with gasket.

Ref : PC0452.012

For 3L ECO tank Ref : PC0451.006.

EXTRACTIBLE TANK PLATE

Ref : PC0452.009

SHIM FOR ECO TANK

Ref : PC0451.023

3L ECO Tank

Ref : PC0451.006

3,5L EXTRACTIBLE TANK

8,5L EXTRACTIBLE TANK

Ref : PC0451.004

FILLER CAP GASKET

Ref : PC0453.007 d

5L ECO Tank

Delivered with tightening butterfly nut but without plate. Plunger equipped with a special hose and his 2 support clips.

Ref : PC0451.007

TANK FILLER CAP

9,5L EXTRACTIBLE TANK

Ref : PC0453.005

Ref : PC0451.010

For tanks Refs : PC0451.012, PC0451.007 and PC0451.006. Delivered with gasket.

Delivered with tightening butterfly nut and plate.

For tanks Refs : PC0451.023, PC0451.024, PC0451.004 et PC0451.010. m

TIGHTENING BUTTERFLY NUT

Ref : PC0711.101

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

p q

s t

FUEL RECOVERY DRUM

TANK CONNECTOR

Ref : PC0454.001

Ref : PC0452.008

Capacity 50 ml.

Tank connector can be adapted on all tanks for fuel return or vent.

FUEL RECOVERY DRUM BRACKET

Ref : PC0454.002

VIOLET FUEL HOSE

Very high strength. Remains flexible over a long period. Sold by meter.

FUEL RECOVERY DRUM CAP

Ref : PC0452.003

No drilled cap.

TRANSPaRENT FUEL HOSE

Ref : PC0711.172 q

TANK PROTECTOR

Ref : PC0452.010

TEKNEEX transparent fuel hose . Sold by meter.

Essential for protecting both your tank and your bottom board. Antivibration foam with adhesive on one side. Dimensions: 160 x 200 mm.

Ref : PC0711.023

TANK PLUNGER

FUEL "Y" PIECE

Ref : PM393.107

Ref : PC0711.024 p

FUEL HOSE SECURING CLIP

REINFORCED FUEL "Y" PIECE

Ref : PM393.111

The best of "Y", especially reinforced for an optimal use.

TAP TO ADJUST FUEL RETURN

Ref : PC0452.030

The installation of this tap on the fuel return line allows you a precise variation of the fuel level inside the carburator pan. This solution help you to calibrate properly the carburation during the race. The best position is on the steering wheel. Weight: 61g.

FUEL FILTER

Ref : PM393.10M

For 8 mm outside diameter hose. 1

Ref : PC0452.001

2 3 4

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

Transparent large volume fuel filter Rotax engine fuel filter Opaque large volume fuel filter Small volume fuel filter

NEED SOME HELP ? +33 (0)2 40 38 26 20

CHASSIS PARTS

Stub axles - Ball joints - Tie rods b c

Soft

j h

i Hard

HEXAGONAL ALUMINIUM TIE ROD

Ref : PC0221.03L

Hexagonal rod for male M8 ball joint. Anodized Titanium-coloured.

BEARING FOR 17-20-25 MM DIAMETER STUB AXLE

Ref : PC0213.105

Bearing for 17 or 20 or 25 mm diameter stub axle.

Clamping washer for 25 mm diameter stub axle with M14 nut.

MALE BALL JOINT

Ref : PC0232.01D

High quality of ball joint. Ring on sintered metal.

Tekneex 25 mm diameter stub axle for M14 nut. Sold individually.

Ø 8 mm :right hand thread and left hand thread

Right H stub axle : Hard Left H stub axle : Hard Right S stub axle : Soft Left S stub axle : Soft

Ø 10 mm : right hand thread c

D10 BALL JOINT

Ref : PC0232.015 g

Steel ball joint. For bottom of steering column. High quality. d

TEKNEEX 17 MM DIAMETER STUB AXLE

Ref : PC0211.05M

Right stub axle Left stub axle

TEKNEEX 25 MM DIAMETER M14 STUB AXLE

Ref : PC0212.04M

Ø 6 mm :right hand thread

CLAMPING WASHER for D25 M14 STUB AXLE

Ref : B9.6000-2Z

Lengths (mm) : 225 - 235- 245 - 250 - 266 - 276 b

STUB AXLE SHAFT SCREW CENTERING DEVICE

Ref : OU931.006

PC0211.049 PC0212.049 PC0211.050 PC0212.050

STUB AXLE RING CENTERING DEVICE D25 M14

Ref : OU931.010

Tool specially designed to make it easier to install chassis height adjustment rings. Screws onto the stub axle shaft. j

STUB AXLE SPACER

Ref : PC0213.00T

For 17 mm or 25 mm diameter stub axle Ø 17mm : 5mm - 10mm - 17mm thick Ø 25mm : 5mm - 15mm thick

Stub axle ring centering device for 25 mm diameter stub axle with M14 nut. Tool specially designed to make it easier to install hub rings by sliding them into place.

PC0211.055 PC0212.055

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

CHASSIS PARTS

Caster - camber washers m

Only with the stub axle shaft kit Ref : PC0213.121.

CASTER/CAMBER PILLS QUICK ADJUSTMENT

STUB AXLE SHAFT KIT CASTER/CAMBER PILLS

WASHERS KIT CASTER/CAMBER PILLS

Ref : PC0213.10M

Ref : PC0213.121

Ref : PC0213.122

Allows a quick adjustment without removing stub axle. Allows the adjustment of the caster angle and the camber angle independently without restrictions on the stub axle shaft. Sold individually.

Stub axle shaft kit for quick adjustment of caster/ camber pills only (Ref : PC0213.10M). Allows a quick adjustment of caster/camber pills without removing stub axle. Ensures more important amplitude for the adjustment of the front wheel height. Complete kit for one go-kart (right stub axle and left stub axle). Delivered without caster/ camber pill.

Conical washers kit for quick adjustment of caster/ camber pills (Ref : PC0213.10M)

Types : 0° - 1° - 2° - 3° - 4° - 5° - 6°

Kit containing : · Conical washers · Stub axle shaft screws

Kit containing : · 2 washers of 4 mm

· 4 washers of 7 mm · 2 washers of 10 mm

· Nuts · Washers for caster/ camber pills

CASTER/CAMBER PILLS

Ref : PC0213.09M

Sold individually. Types : 0° - 1° - 2° - 3° - 4° - 5° - 6°

Take 2 caster/camber pills to have the value of angle degree change.

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

CHASSIS PARTS

Nuts and bolts g

h b f

d c

j k

BHC SCREWS

Ref : B1B

Ref : B1P

4x16 - 5x6 - 5x10 - 5x16 - 6x10 - 6x16 - 6x25 - 6x30 - 6x40 8x10 - 8x16 - 8x20 - 8x25 - 8x30 - 8x35 - 8x40 - 10x12 10x20 - 10x30 - 10x35 - 10x40 b

4x4 / Pitch : 0,7 - 5x6 / Pitch: 0,8 - 6x6 / Pitch : 1 - 6x6 à téton / Pitch : 1 - 8x30 / Pitch : 1,25 f

CHC SCREWS

NUTS

5x6 - 6x16 - 6x25 - 6x30 - 6x35 - 6x40 - 6x60 - 6x80 8X20 - 8X25 - 8x30 8x40 - 8x45 - 8x50 Flat head - 8x65 10x25 - 10x40 - 10x50 - 10x60

FHC SCREWS

M5 nylstop - M6 - M6 nylstop - Flange M6 nylstop M8 - M8 nylstop - Flange M8 nylstop - M10 M10 nylstop - Flange M10 nylstop - M10 nylstop Flange M12 nylstop - M14 nylstop g

Ref : B1F

FHC screws, aluminium washers : Ø 6mm black - Ø 6 mm black - Ø 6 mm titane Ø 8 mm black - Ø 8 mm black - Ø 10 mm black For CHC screws, washers : Plastic Ø 6 mm black - Aluminium Ø 6 mm black

PLAIN WASHERS

For pedal : Ø 10 mm - Ø 12 mm For tube : Ø 16 mm - Ø 20 mm - Ø 26 mm - Ø 28 mm Ø 30 mm - Ø 32 mm

Ref : B3p

5x10 - 6x12 - 6x16 - 6x20 - 6x25 - 6x30 - 6x35 - 6x40 6x45 - 8x16 - 8x20 - 8x25 - 8x30 - 8x40 - 8x50 - 8x55 10x45 - 10x70

d5 D10 EP1 - d6 D12 EP1.2 - d6 D14 EP1.2 - d6 D18 EP1.2 d8 D12 EP2 - d8 D16 EP1.6 - d8 D16 EP2 - d8 D22 EP1.5 d10 D20 EP2 - d12 D20 EP2

PLASTIC PLUG

Ref : PC0113.00D

CUP WASHERS

Ref : PC0711.10D

Ref : B2

Ref : B1C

GRUB SCREWS

SHOULDER CHC SCREWS

Ref : B1.C0810L

Steel shoulder CHC screws M8 D10 f9. Lengths : 70 mm - 80 mm

TH SCREWS

Ref : B1T

5x16 - 5x30 - 6x20 - 6x30 - 6x40 - 8x25 - 8x40 - 8x50 8x75 - 10x20 - 10x45 - 10x80

m10 HEADLESS SCREWS

Ref : B1.S10100L

Screws for engine adjuster. M10x100 - M10x80

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

CHASSIS PARTS

Pedals and accessories

Top Quality

SET OF ALUMINIUM ADJUSTABLE PEDALS

Ref : PC0423.057

Optimum solution to adjust the pedals of competition karts. Adjustable machined aluminium crankset, adapted for 7 to 15 years old drivers. Can be mounted on the steering

triangle (without additionnal hole in the floor). 2 attachment points : entraxe of 45 mm.

SET OF HEEL RESTS

Ref : PC0424.004 Dimensions : Width: 2,3 cm - Length: 9,8 cm Height: 2,8 cm

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

tekneex HEEL RESTS KIT

Ref : PC0424.018

4 adjustments are possible : 路 Forward / aftward adjustibility 路 Crankset height adjustibility 路 Feet height position (adjustable) 路 Progressive crankset system (5 adjustable positions)

SET OF ENVELOPING HEEL RESTS

Center distance between fixing screws : 45 mm. Screws diameter : 6mm.

PEDAL EXTENSION

Ref : PC0424.035

Ref : PC0424.007 Dimensions : Width: 11.5 cm - Length: 11 cm Height: 4 cm.

CONTACT THE NEARESt ITAK ASHOP STORE

Fits most chassis.

SHIPMENTS WITHIN 24H (see the practical guide page 4)

Aluminium black anodized skid-proof pedal extensions. For pedal of maximum diameter 14 mm of tube. Delivered with 2 set screws. Sold in pairs.

NEED SOME HELP ? +33 (0)2 40 38 26 20

engines 80 Rotax engines 82 Iame engines 83 TM engines

ENGINES

rotax engines

The complete engine spare parts catalogues are available for download on www itakashop.com.

FRENCH CLASS cadet

FFSA 125 MINI MAX ROTAX - CADET

Ref : M01.45

125cc, 2 stroke, integrated thermostat, reed valve intake, oil-in-fuel lubrication, balance shaft, digital battery ignition, liquid colling and integrated water pump, integrated electric starter, dry centrifugal clutch, right drive, red cylinder head and numbered identification plate. Livré complet avec : Carburetor, pompe à essence, pot d'échappement, radiateur, Delivered complete with : Carburettor, pump, exhaust silencer, radiator, hoses, battery and battery durites, batterie et support batterie, chargeur fuel et adaptateur.

holder, charger and adaptor.

Bore Stroke Displacement Max horse power Max torque Clutch Intake Silencer Mixture Weight

54.00 mm 54.50 mm 124,8 cm3 16.5 hp at 8.500 Rpm (12 kW) 12 Nm at 7.500 Rpm Dry centrifugal clutch With air filter 2% of synthetic oil 12 Kg without accessories

Bore Stroke Displacement Max horse power Max torque Clutch Intake Silencer Mixture Weight

54.00 mm 54.50 mm 124,8 cm3 21.5 HP at 8.500 Rpm (16 kW) 17 Nm at 8.500 Rpm Dry centrifugal clutch With air filter 2% of synthetic oil 12 Kg without accessories

FRENCH CLASS nationale

FFSA J 125 MAX ROTAX

Ref : M01.32

125cc, 2 stroke, integrated thermostat, reed valve intake, oil-in-fuel lubrication, balance shaft, digital battery ignition, liquid colling and integrated water pump, integrated electric starter, dry centrifugal clutch, right drive, red cylinder head and numbered identification plate Livré complet avec : Carburetor, pompe à essence, pot d'échappement, radiateur, Delivered complete with : Carburettor, fuel pump, exhaust silencer, radiator, hoses, battery and battery durites, batterie et support batterie, chargeur et adaptateur.

holder, charger and adaptor.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

The complete engine spare parts catalogues are available for download on www itakashop.com.

FRENCH CLASS max master max

125 MAX EVO ROTAX

Ref : M01.23

125cc, 2 stroke, reed valve intake, oil-in-fuel lubrication, balance shaft, digital battery ignition, liquid cooling and integrated water pump, electronically controlled exhaust valve, integrated electric starter, dry centrifugal clutch, right drive, black cylinder head and numbered identification plate. Livré complet avec : Carburetor, pompe à essence, pot d'échappement, radiateur, Delivered complete with : Carburettor, fuel pump, exhaust silencer, radiator, hoses, battery and battery durites, batterie et support batterie, chargeur et adaptateur.

holder, charger and adaptor.

Bore Stroke Displacement Max horse power Max torque Clutch Intake Silencer Mixture Weight

54.00 mm 54.50 mm 124,8 cm3 30 HP at 11.500 Rpm 21 Nm at 9.000 Rpm Dry centrifugal clutch With air filter 2% of synthetic oil 12 Kg without accessories

FRENCH CLASS dd2 master DD2

125 MAX DD2 EVO ROTAX

Ref : M01.42

125cc, 2 stroke, reed valve intake, oil-in-fuel lubrication, balance shaft, digital battery ignition, liquid cooling and integrated water pump, electronically controlled exhaust valve, integrated electric starter, centrifugal oil bath, 2-speed gearbox, ESA (Electric Shifting Assistance), black cylinder head and numbered identification plate. Livré complet avec : Carburetor, pompe à essence, pot d'échappement, radiateur, Delivered complete with : Carburettor, pump, exhaust silencer, radiator, hoses, battery and battery durites, batterie et support batterie, chargeur fuel et adaptateur.

holder, charger and adaptor.

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

Bore Stroke Displacement Max horse power Max torque Clutch Intake Silencer Mixture Weight

54.00 mm 54.50 mm 124,8 cm3 34 HP at 12.000 Rpm 22 Nm at 10.500 Rpm Centrifugal oil bath With air filter 2% of synthetic oil 16,8 Kg without accessories

NEED SOME HELP ? +33 (0)2 40 38 26 20

ENGINES

iame engines

The complete engine spare parts catalogues are available for download on www itakashop.com.

FRENCH CLASS senior / master gentleman

PARILLA IAME X30 ENGINE 2018

Ref : M04.30

125cc, 2 stroke, water cooling system, reed valve inlet system, with clutch and electric starter. Livré complet avec : Carburetor, pompe à essence, pot d'échappement, radiateur, Delivered with : Electric pack,chargeur Tillotsonetcarburettor, durites, batterie et support batterie, adaptateur. cooling system, airbox, exhaust, spark plug and

battery holder kit (without battery).

Bore Stroke Carburettor Mixture

54.00 mm 54.00 mm Tillotson HW-27A (D27 venturi) 5% synthetic oil

Bore Stroke Carburettor

41.80 mm 43.35 mm max Tillotson HL-394B (D16 venturi)

FRENCH CLASS minime

PARILLA IAME MINIME FFSA 60cc engine

Ref : M04.18

60cc, 2 stroke, air cooling system, piston port inlet system, centrifugal dry clutch, pull start. Livré complet avec : Carburetor, pompe à essence, pot d'échappement, radiateur, durites, batterie et support batterie, chargeurair-box, et adaptateur. Delivered with : Tillotson carburettor, exhaust, spark plug.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

ENGINES

tm engines

The complete engine spare parts catalogues are available for download on www itakashop.com.

FRENCH CLASS kz

TM 125 KZ10 C ENGINE

Ref : M06.25

125cc, 2 stroke, 6-speed gearbox, valve cartridges intake, exhaust manifold, 4° angled piston and cylinder head, D22 crankshaft's conrod, roller bearings. Livré complet avec : Carburetor, pompe à essence, pot d'échappement, radiateur, durites, batterie et support batterie,exhaust, chargeurElto et adaptateur. Delivered with : Carburettor, exhaust silencer, ignition system and engine mount.

Bore Stroke Carburettor Piston Spark plug Cooling Mixture Weight

54.00 mm 54.00 mm 30 mm 1 piston ring Original TM Single water circuit 4% synthetic oil 20 Kg

TM 125 KZ10 C MODIFIED FACTORY ENGINE

Ref : M06.26

Based on stock engine TM 125 KZ10 C +. Additional modification : Manufactured carter and cylinder.

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

PERIPHERICAL ENGINE PARTS 86 Radiators and cooling accessories 88 Air boxes 90 Spark plugs and accessories 92 Batteries and accessories 94 Exhausts 96 Exhausts / Engine mounts flange 99 Carburettors

PERIPHERICAL ENGINE PARTS

radiators a

c d

f k

COMPLETE LARGE R NEW-LINE RADIATOR

Ref : PM402.006

Height : 430 mm - Width : 200 mm - Thickness : 45 mm - Total weight : 2,1 Kg

The Reference in the field of aluminium radiators. Delivered with bracket and overflow bottle (without shutter blind). Height : 430 mm - Width : 240 mm - Thickness : 45 mm - Total weight : 2,6 Kg

COMPLETE BIG NEW-LINE RADIATOR

MAX EVO / J125 MAX / MINIMAX RADIATOR

Ref : PMFR402.016

COMPLETE EXTRA-LARGE RS NEW-LINE RADIATOR

Ref : PM402.007

NEW-LINE RADIATOR CAP

Ref : PM402.010

The Reference in the field of aluminium radiators. Delivered with plug, fixation kit, bracket and overflow bottle (without shutter blind).

MAX EVO / J125 MAX / MINIMAX RADIATOR BRACKET

Ref : PMFR402.014

DD2 EVO RADIATOR

Ref : PMFR402.106

Ref : PM402.026

The Reference in the field of aluminium radiators. Delivered with bracket and overflow bottle (without shutter blind).

ROTAX MAX RADIATOR CAP

Ref : PMFR402.101

Height : 430 mm - Width : 290 mm - Thickness : 45 mm - Total weight : 3,1 Kg d

bracket KIT FOR NEW-LINE RADIATOR

Ref : PM402.00M

Available for large (R), extra-large (RS) and BIG radiators. e

ROTAX STICKER FOR RADIATOR

Ref : AC701.24T

For MAX EVO / J125 MAX / MINIMAX radiators and DD2 EVO radiators.

NEW-LINE SHUTTER BLIND FOR RADIATOR

Ref : PM402.01M

Available for large (R), extra-large (RS) and BIG radiators.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

OVERFLOW BOTTLE

PULLEY FOR ALUMINIUM WATER PUMP

Ref : PC0531.010

Ref : PM401.015

This plastic bottle comes with a hose clip to fasten it to kart frame or radiator bracket : it collects any liquid or vapor that may leak.

Made from machined aluminium. For 50 mm Ã¸ shaft. Outside diameter 90 mm.

WATER SYPHON KIT FOR ROTAX MAX

WATER PUMP BELT

Ref : PM401.021

Ref : PC0541.008

Water syphon kit for Rotax MAX EVO / J125 MAX / MINIMAX engine. Delivered with a hose, a fuel "Y" piece, a bracket and screws. n

WATER SYPHON KIT FOR DD2 EVO

WATER PUMP support

Ref : PC0561.03M Available in diameters : 30 mm - 32 mm

Ref : PC0541.009

Water syphon kit for DD2 EVO engine. Delivered with a hose, a fuel "Y" piece, a bracket and screws. o

TEKNEEX ALUMINIUM WATER PUMP

TEKNEEX WATER HOSE

Ref : PM401.026

TEKNEEX braid water hose from radiator to pump or from engine to radiator. Inside diameter : 16 mm.Developed length : 820 mm.

Ref : PM401.004

TEKNEEX high efficiency water pump carved from solid fused aluminum, which guarantees a quality product that meets all requirements of competition. It is engineered to optimize water flow through the circuit and improve the performance of all radiators.The component fits all kinds of karts. p

PLASTIC WATER PUMP

TEKNEEX pReformed braid water hose from pump to engine. Special KZ engine. Inside diameter : 16 mm.

FASTENING COLLAR FOR WATER HOSE

Ref : PM401.023

PULLEY FOR PLASTIC WATER PUMP

Ref : PM401.016

For 16 to 25 mm diameter hoses. y

For 50 mm diameter shaft. Outside diameter 75 mm. r

TEKNEEX WATER HOSE-KZ ENGINE

Ref : PM401.025

Ref : PM401.003

WATER TUBE SUPPORT FOR SEAT

Ref : PM401.027

Allows to fix the water hose on the seat. Delivered with the screw. Sold individually.

ALUMINIUM WATER PUMP

Ref : PM401.001

WATER HOSE SLEEVE

Ref : PM401.024

Outside diameter : 16 mm. ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

PERIPHERICAL ENGINE PARTS

Air boxes

c g

h i

KG NITRO AIR BOX

UNIVERSAL AIR BOX

Ref : PM392.033M

Ref : PM392.004

This air box, used in competition, allows high level of noise reduction, a dynamic or static air intake set up. High quality internal filter for maximum engine protection. Delivered complete with suction tubes, sleeve and cover rain. Built-in filter. CIK/FIA approved : NITRO D23 (suction tubes 23 mm Ø). Homologation number : 7/SA/24 NITRO D30 (suction tubes 30 mm Ø). Homologation number : 8/SA/24

Ideal for reed-valve engine or piston skirt. Delivered complete with trumpets, grills, sleeve and serflex clamp.

Ref : PM392.033 : NITRO D23 (suction tubes 23 mm Ø) : OK & OKJ Classes Ref : PM392.034 : NITRO D30 (suction tubes 30 mm Ø) : KZ2 & KZ Classes

KG NITRO AIR BOX HOLDER KIT

Outside diameter : 66 mm - Inside diameter : 61 mm

TEKNEEX support for air box Delivered complete with flange, support and screws. Fits on all tubes. For all types of air box.

Ref : PC0551.120 h

System of fastening made to measure of your KG NITRO air box to the chassis. c

KG NITRO AIR BOX ELASTIC SECURING STRAP

Elastic securing strap for air box. Thickness : 5 mm. Inside diameter : 175 mm. i

KG NITRO AIR BOX SLEEVE

Ref : PM392.075

ELASTIC SECURING STRAP FOR AIR BOX

Ref : PC0551.108

Ref : PC0551.121

Elastic securing strap for KG NITRO air box. Thickness: 3.5 mm. Inside Ø: 38 mm.

UNIVERSAL SUPPORT FOR AIR BOX

Ref : PC0551.114

SERFLEX AIR BOX CLAMP

Ref : PM392.093

Serflex air box clamp for all kinds of air boxes. Width : 9 mm. Dimensions : from 50 to 70 mm.

KG NITRO AIR BOX FILTER

Ref : PM392.076

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

n m

RR ACTIVE AIR BOX

Ref : PM392.031M

CONNECTION 10° FOR ACTIVE AIR BOX

Ref : PM392.062

This air box from RR is very used in competition. Thanks to a small steel tie, the rubber connection allows to fix the carburettor very close to the body filter. Delivered complete with suction tubes and sleeve. Built-in filter. CIK/FIA approved : Homologation number 28/SA/24.

CONNECTION FOR ACTIVE AIR BOX

Ref : PM392.063

Ref : PM392.031 : ACTIVE D23 (suction tubes 23 mm diameter) : OK & OKJ Classes q k

COVER RAIN FOR ACTIVE AIR BOX

ACTIVE AND NOX AIR BOX FILTER

Ref : PM392.077

Ref : PM392.106 r l

HOLDER FOR ACTIVE AIR BOX

Ref : PC0551.112

BRACKET FOR ACTIVE AIR BOX

Ref : PC0551.113

The top can be dismantled in order to direct the suction tubes towards the front or the rear. Delivered complete with suction tubes, sleeve and serflex clamp. Built-in filter. CIK/FIA approved : Homologation number 26/SA/18. Ref : PM392.015 : FREELINE BR23R (suction tubes Ø 23 mm) s

SERFLEX AIR BOX CLAMP FOR ACTIVE AIR BOX

Ref : PM392.095

FREELINE AIR BOX

Ref : PM392.015M

FREELINE AIR BOX HOLDER KIT

Ref : PC0551.105

System of fastening made to measure of your FREELINE air box to the chassis.

Serflex air box clamp for ACTIVE air box. Width : 5 mm. Dimensions : from 68 to 79 mm.

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

PERIPHERICAL ENGINE PARTS

Spark plugs and accessories a

NGK RACING B/EG SPARK PLUG

NGK RACING BR10 EIX SPARK PLUG

Ref : PM366.06M

Ref : PM366.067

Racing / leisure spark plug.

Racing / leisure spark plug. Iridium electrode.

Use: B9EG, for wet and cold weather. B10EG, for moderate weather. B11EG, for hot weather. b

NGK RACING B/EGV SPARK PLUG

Ref : PM366.05M

Spark plug with precious metal electrode for improved efficiency and faster acceleration. Use : B9EGV, for cold weather. B10EGV, for moderate weather. c

NGK RACING BR/EG SPARK PLUG

Ref : PM366.062M

Racing / leisure resistor spark plug. Use : BR9EG, for cold weather. BR10EG, for moderate weather.

Use : for moderate weather.

NGK RACING 6254E-105 SPARK PLUG

Ref : PM366.058

Spark plug with precious metal internal electrode for Racing engines. Use : for hot and moderate weather. f

DENSO SPARK PLUG

Ref : PM366.01M

DENSO IW27 spark plug delivered as standard with ROTAX 125 MINI MAX FFSA CADET and J 125 MAX FFSA engines. Use : IW24, for cold weather. IW27, for cold and moderate weather; IW29, for moderate weather. IW31, for hot weather. IW34, for very hot weather.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

l j

NGK RACING R7282 SPARK PLUG

TM RACING 8 SPARK PLUG

Ref : PM366.065M

Ref : PM366.074

Spark plug specially adapted for KZ engines. Very short, long base (19 mm), platinum electrode, this spark plug of very high technology is developed for engines with high performance.

TM Racing 8 spark plug delivrered as standard with TM engines. m

NGK GR9DI-8 SPARK PLUG FOR ROTAX EVO

Ref : PMFR366.003 R7282-105 R7282-11

Heat range 10,5 Heat range 11

Ref : PM366.066 Ref : PM366.065

NGK TRS 1225 SPARK PLUG CAP

Ref : PM366.104

Spark plug cap for NGK Racing R7282-105 and R7282-11 spark plugs. i

NGK Racing GR9DI-8 spark plug delivered as standard with ROTAX MAX EVO and DD2 EVO engines. Large temperature range to allow using for cold, moderate or hot weather.

NGK LB 05EMH SPARK PLUG CAP

RACING SPARK PLUG CAP FOR ROTAX EVO

optional

Ref : PMFR366.002

Optional NGK Racing spark plug cap for ROTAX MAX EVO and DD2 EVO engines. Allows for easier support of the cap on the spark plug, at tighter fit and a better seal.

Ref : PM366.102 o j

NGK LB 10EH SPARK PLUG CAP

Ref : PM366.101

RACING SPARK PLUG CAP FOR ROTAX

Ref : PMFR366.001

NGK TB05EMA spark plug cap delivered as standard with ROTAX engines.

SILICONE SPARK PLUG CAP

Ref : PM366.103

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

PERIPHERICAL ENGINE PARTS

Batteries and accessories

YT7B-BS YUASA BATTERY

ROTAX LITHIUM BATTERY

optional

Ref : PMFR364.018

Ref : PMFR364.027

YT7B-BS YUASA lead-ion battery 12V 7.0A. Long life. Delivered as standard with ROTAX engines.

Optional lithium battery 12V 2.3Ah much lighter than the original lead-ion battery (about 2 kg lighter). Same size as the original battery. Charges faster than a conventional battery (charger to use: reference PMFR364.028 Rotax Optimate Lithium battery charger). Approved ROTAX MAX and ROTAX DD2 class.

Weight : 2,6 Kg

Weight : 590 g

ROTAX BATTERY CHARGER

ROTAX OPTIMATE LITHIUM BATTERY CHARGER

Ref : PMFR364.002

Ref : PMFR364.028

Standard ROTAX part. Used to connect directly to the electrical harness for recharging the battery without having to dismantle it. 12 V. For lead-ion battery.

Optimate lithium battery charger, the first Optimate to protect your lithium battery in a way no other charger did before! With 5 Amps of charge current available Optimate lithium unique multi step Ampmatic program recharges and balances cells within the battery quickly and efficiently. SafeTº precise charge control. Ampmatic program adjusts to size of battery. Optimizes battery power and life. Test before and after charging. Low voltage battery save mode. Weight : 740g / Dimensions : 199 x 71 x 61 mm Included accessories: · Fused eyelet set, weather protected.

· Clamps set for bench charging.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

FGH FIAMM BATTERY

FGHL FIAMM BATTERY

Ref : PM364.023

Ref : PM364.024

FIAMM lead-ion battery from FGH serie. 12V 9.0A. Not allowed in Rotax "Coupe de Marque".

FIAMM lead-ion battery from FGHL serie. 12V 7.2A. Long life. Not allowed in Rotax "Coupe de Marque".

Weight : 2,6 Kg

OPTIMATE 1+ BATTERY CHARGER

ARTIC 800 BATTERY CHARGER - LEAD-ACID

Ref : PM364.051

Ref : PM364.052

Ideal for any type of 12 volt lead-acid battery without overcharging, AGM & GEL from 2 - 30Ah. Electronics safe low volt SAVE (from as low as 4V) for discharged flat batteries. Delivers constant bulk and pulsing optimize charge for optimal charge of every battery.

The ARTIC 800 (0.8 A) is specifically designed to charge lead-acid batteries 12 V, providing an automatic charge controlled by microprocessor. Efficient, compact and light, it provides a 2 times faster charge than a traditional charger (no monitoring required). - Designed for 12 V lead-acid batteries from 1.6 to 25 Ah (maintenance charging up to 80 Ah) - Plug & play system : Simplified interface to prevent user errors.

FEMALE TERMINAL

BATTERY CONNECTOR

Ref : PM367.00M

Ref : PM364.025

3 differents models : Yellow female terminal not isolated for male terminal of 6.3 mm width and 0.8 mm thickness for 6 mm² wire cross-section. Yellow female terminal not isolated for male terminal of 9.53 mm width and 1.1 mm thickness for 6 mm² wire cross-section. Blue female terminal completely isolated for male terminal of 6.3 mm width and 0.8 mm thickness for 2.5 mm² wire cross-section.

Useful to connect other equipments on your battery (as data acquisition, transponder, chronometer, etc…). Sold individually.

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

PERIPHERICAL ENGINE PARTS

Exhausts

Elto Racing, thanks to its extensive experience in silencer production for karting managed to link noise reduction with best performance for KZ engines. The favoured choice of factory and established racing teams.

ELTO OVS/2 EXHAUST SILENCER

ELTO TD/2 EXHAUST SILENCER

ELTO EXHAUST SILENCER RECHARGE

Ref : PM371.301

Ref : PM371.303

Ref : PM371.305

Elto OVS/2 oval silencer, simple interior absorption channel. CIK-FIA 38/EX-SI/24 certification.

Elto TD/2 round silencer, simple interior absorption channel. CIK-FIA 39/EX-SI/24 certification.

2 parts.

Weight : 2,50 kg

Dimensions : part 1 : 100x46 cm - part 1 : 30x46 cm

Weight : 2,30 kg

D Racing : Designed for all KZ engines and rigorously laboratory tested to limit noise emission to 96db, these silencers comply with FFSA standards and are characterised by a specific punching tool, high density insulation and machined rings to maintain high engine performance.

D RACING VARENNES EXHAUST SILENCER

SPRING FOR D RACING EXHAUST SILENCER

Ref : PM371.401

Ref : PM371.407

D Racing Varennes oval silencer, titanium tube. CIK-FIA 2/EX-SI/22 certification.

Steel biconical spring with anti-vibration protection. Sold individually.

Weight : 2,10 kg

D RACING EXHAUST SILENCER REcharge

Ref : PM371.405

Free length : 58 mm - Wire hook diameter : 2,5 mm Wire coil diameter : 1,7 mm - Outside diameter : 10 mm

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

X30 EXHAUST SILENCER

COMPLETE BRACKET KIT FOR KZ EXHAUST SILENCER

SERFLEX CLAMPS for EXHAUST SILENCER

Ref : PMIA371.007

Ref : PC0662.053

Ref : PM371.410

IAME exhaust silencer for X30 engines. Includes exhaust silencer, exhaust header, and exhaust bracket. Easy-fitting.

Ajustable bracket kit for KZ exhaust silencer.

Serflex clamps and rubber strip for exhaust silencer (KZ type).

kit including : · Supports · Screws

· Silentblocs · Rubber strips

kit including : · 2 stainless steel hoses clamp Ø 12 mm wide and 120-140 mm

· 1 Rubber strips Length 500 mm

o m

EXHAUST INSULATING HOSE

Ref : PM373.102

rotax RETROFIT KIT ISOLATING MAT

EXHAUST HOSE

Ref : PM372.102

Ref : PMFR371.031 Wide : 105 mm k

Increases lifetime of exhaust insulation.

ROTAX EXHAUST INSULATION

Ref : PMFR371.030

Inside Ø : 40 mm - Outside Ø : 45 mm m

EXHAUST BRACKET

Ref : PC0662.023

For ROTAX exhausts.

EXHAUST SILENCER SUPPORT

Ref : PC0662.006

Dimensions : 48 cm x 27 cm

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

For 90mm diameter exhaust. Available in 250 cm.

Delivered with springs and securing accessories.

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

PERIPHERICAL ENGINE PARTS

Exhausts / engine mounts flange Exhaust silencers : Confer engine spare parts on www.itakashop.com

Wire Ø

Drawing of springs : Legends Outside Ø

Free length

springs All springs sold individually

a c

EXHAUST HOLDER SPRING

Ref : PM373.003 Free length : 135 mm - Ø wire : 1,5 mm Ø outside : 12 mm

f e

ROTAX EVO EXHAUST SILENCER SPRING

ROTAX EVO EXHAUST SPRING

Ref : PMFR373.008

Ref : PMFR373.007

For Rotax Max Evo and DD2 Evo engines.

For Rotax Max Evo and DD2 Evo engines. Conical spring.

Free length : 98,50 mm - Ø wire : 1,3 mm Ø outside : 11 mm

Free length : 54 mm - Ø wire (conical side) : 2,5 mm Ø wire (conical opposite side) : 1,8 mm - Ø outside : 11,35 mm

ROTAX EXHAUST SPRING

Ref : PMFR373.002

EXHAUST SPRING

Ref : PM373.001

For Rotax engines. Free length : 51,50 mm - Ø wire : 2,30 mm Ø outside : 16 mm g

Free length : 50 mm - Ø wire : 1,5 mm Ø outside : 12 mm

BLACK HIGH-TEMPERATURE PAINT

EXHAUST SPRING

Ref : PM373.010

Free length : 70 mm - Ø wire : 2 mm Ø outside : 12,5 mm

COLOURLESS HIGH-TEMPERATURE VARNISH

Ref : AC672.003

Ref : AC673.001

Black paint which is resistant to temperatures up to 650°C.

Colourless varnish which is resistant to temperatures up to 300°C.

Capacity : 400 ml

ALUMINIUM ENGINE MOUNT FLANGE

STEEL ENGINE MOUNT FLANGE

Ref : PC0512.00D

Ref : PC0512.01D

Solid machined aluminium clamp. Sold individually.

Ultra-flat steel clamp.For all types of engine. Sold individually.

Diameters : 28 mm - 30 mm - 32 mm

TEKNEEX ENGINE MOUNT 8°

Ref : PC0511.04M Ø 28 mm : No drilled (Ref : PC0511.037) Iame Minime FFSA 60cc drilled (Ref : PC0511.047) Rotax for Furia chassis drilled (Ref : PC0511.039) Ø 30 mm : No drilled (Ref : PC0511.040) - Rotax drilled (Ref : PC0511.041) - X30 drilled (Ref : PC0511.042) Ø 32 mm : No drilled (Ref : PC0511.043) Rotax drilled (Ref : PC0511.044)

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

PERIPHERICAL ENGINE PARTS

Carburettors b

For all spare parts and all other carburettors, confer engine spare parts on www.itakashop.com

DELL'ORTO VHSB 34 CARBURETTOR

TILLOTSON DIAPHRAGM AND GASKET KIT

Ref : PMFR391.00M

Ref : CA133.002M

Rotax engine carburettor. 3 models available :

Set including 2 gaskets and 2 diaphragms. 2 models available :

For Rotax Max and DD2 engines (QS) For Rotax Max EVO engines (XS) For Rotax DD2 EVO engines (XS)

PMFR391.001 PMFR391.030 PMFR391.031

DG-1-HL DG-2-HW : Approved for OKJ class (HW-43) and OK class (HC-112)

TILLOTSON HC-112A CARBURETTOR

Venturi diameter : 24mm. Throttle Bore diameter : 28 mm. Additional features include labeled H and L needles. Application: CIK-FIA OK Class.

Set including 3 gaskets, 2 diaphragms, 1 filter, 1 needle valve, 1 needle seat, 1 level and its spring for IBEA carburettors. g

TILLOTSON HW-27A CARBURETTOR

Set including 2 gaskets and 2 diaphragms for IBEA carburettors.

For IAME X30 engines.

Carburettor RETURN SPRING

Ref : CA171.303

TILLOTSON REPAIR KIT

Ref : CA133.00M

Set including 4 gaskets, 2 diaphragms, 1 needle valve, 1 needle seat, 1 level. 2 models available : RK-117-HL RK-2-HW : Approved for OKJ class (HW-43) and OK class (HC-112)

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

IBEA DIAPHRAGM AND GASKET KIT

Ref : CA133.009

Ref : CA111.070

IBEA REPAIR KIT

Ref : CA133.010

Ref : CA111.060

CA133.002 CA133.017

CONTACT THE NEARESt ITAK ASHOP STORE

Unlike springs working under tension, this model works under compression, making it extremely reliable. Easy installation. Works with most shutter carburettors.

CA133.000 CA133.016

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

PERIPHERICAL ENGINE PARTS

Carburettors b

ACCELERATOR PROTECTIVE SLEEVE PROTECTION

Ref : PC0711.046

Cable : Length: 2000 mm - Ø : 1,8 mm Cylindrical pivot pin : Length: 7 mm - Ø : 7 mm

ADJUSTABLE SHEATH STOP

Ref : PC0711.192

Adjustable sheath stop diameter 7mm. With sleeve protection. c

STAINLESS STEEL ACCELERATOR CABLE

Ref : PC0711.040

Holds of protective sleeve and protects humidity. b

ACCELERATOR PROTECTIVE SLEEVE

Cable : Length: 1800 mm - Ø : 1,3 mm Banjo type - pivot pin : Length: 3 mm - Ø : 3 mm

Ref : PC0711.132 h

Protective sleeve equipped with a teflon tube.

STAINLESS STEEL ACCELERATOR CABLE

Ref : PC0711.088

STAINLESS STEEL CLUTCH CABLE

Ref : PC0711.084

Outside Ø : 5 mm - Inside Ø : 2 mm - Sold by meter. d

ACCELERATOR PROTECTIVE SLEEVE

Cable : Length: 2000 mm - Ø : 2 mm Hexagon pivot pin : Length: 10,7 mm

Ref : PC0711.162 i

Protective sleeve equipped with a teflon tube.

SILICONE VACUUM PIPE

Ref : PM393.012

Outside Ø : 6 mm - Inside Ø : 2,5 mm - Length : 1,8 m. Inside Ø : 3,5 mm - Outside Ø : 6 mm - Length: 1 000 mm e

STEEL ACCELERATOR CABLE

Ref : PC0711.031 Cable : Length: 2500 mm - Ø : 1,2 mm Cylindrical pivot pin : Length: 3,5 mm - Ø : 3 mm

100

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

MIKUNI KZ FUEL PUMP

GASKETS KIT FOR MIKUNI ROUND PUMP

Ref : PM393.010

Ref : CA133.005M

Special for KZ. Flows 35 litres per hour.

2 models : Round and Round high-flow.

MIKUNI KZ FUEL PUMP BRACKET

MIKUNI RECTANGULAR FUEL PUMP

Ref : PM393.011

Ref : PM393.003

Bracket for Mikuni KZ fuel pump.

Flows 14 litres per hour.

GAS PUMP STAND AND GAS SYPHON KIT

Ref : PC0531.009

Gas pump stand and syphon kit for TM KZ engine. m

MIKUNI PLASTIC ROUND FUEL PUMP

Ref : PM393.008

GASKETS KIT FOR MIKUNI RECTANGULAR PUMP

Ref : CA133.004

TAP TO ADJUST FUEL RETURN

Ref : PC0452.030

Flows 25 litres per hour. n

MIKUNI ROUND FUEL PUMP

Ref : PM393.002

CARBURETTOR SLIDE PROTECTION

Ref : OU924.014

Flows 20 litres per hour.

Allows to protect carburettor slide and needle. Fits on VHSB34 carburettor. Ideal for ROTAX engines.

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

101

102

tools 104 Tools for karts 109 Tools for tyres 112 Tools for engines

TOOLS

Tools for karts

T-SHAPED SOCKET WRENCH

Ref : OU912.00T

Ref : OU911.00T

Its length allows you to reach the most inaccessible spots.

Very high quality with reinforced tip for greater strength. For Allen screws.

Ø n°8 Ø n°10 Ø n°11 Ø n°13

Ref : OU912.004 Ref : OU912.001 Ref : OU912.002 Ref : OU912.003

Ø n°3 Ø n°4 Ø n°5 Ø n°6 Ø n°8

e d

HOOK WRENCH FOR M20 NUT

Ref : OU911.001 Ref : OU911.002 Ref : OU911.003 Ref : OU911.004 Ref : OU911.005

SCREWDRIVER for COLLAR / SERFLEX

BETA WRENCH WITH HEXAGON MALE ENDS

Ref : OU914.02T

T-handle wrenches with swivelling hexagon male ends. 3 dimensions available: 4 mm, 5 mm and 6 mm.

TORQUE WRENCH ERGOTORQUE - KS TOOLS

Ref : OU914.003

Ref : OU914.019

OU914.01T

Tool specially designed for screwing on and off the M20 nut on 25 mm diameter stub axle.

Flexible screwdriver for 6 point collar/serflex combining handling ability and ergonomics.

ERGOTORQUE KS TOOLS torque wrench with rotary mushroom ratchet head. - Actuation accuracy : ±3 % tolerance of the set scale value. - For controlled fastening in clockwise and counter clockwise directions. - An audible and palpable signal when the desired torque value is achieved. - Torque setting by pulling out and pushing in the slide-in knob at the end of the handle. - With exact gearing 30-teeth ratchet mechanism. - Scale with magnifying glass (double scale in Nom and lbfoft divisions for precise adjustment) . - Two-component handle

104

T-SHAPED ALLEN KEY

SOCKET SET 1/4' 46 PIECES-KS TOOLS

SOCKET SET 1/2' 22 PIECES-KS TOOLS

Ref : OU914.016

Ref : OU914.017

6 point, 46 pieces, chrome vanadium steel, matt finish.

6 point, 22 pieces, chrome vanadium steel, matt finish.

3 models available: - Ergotorque torquewrench,1/4'' 1-25 Nm : Adjustment: 1-25Nm (0.8-18 lbf-ft) / Division : 0.1Nm / Length : 285 mm / Head diameter : 35 mm / Head height : 18 mm - Ergotorque torque wrench,1/2'' 10-100 Nm : Adjustment : 10-100Nm (8-75 lbf-ft) / Division : 0.5Nm / Length : 412 mm / Head diameter : 45 mm / Head height : 23 mm - Ergotorque torque wrench,1/2'' 20-200 Nm : Adjustment : 20-200Nm (15-150 lbf-ft) / Division: 1Nm / Length : 500 mm / Head diameter : 45 mm / Head height : 23 mm

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

STUB AXLE SHAFT SCREW CENTERING DEVICE

STUB AXLE RING CENTERING DEVICE D25 M20

STUB AXLE RING CENTERING DEVICE D25 M14

Ref : OU931.006

Ref : OU931.007

Ref : OU931.010

Tool specially designed to make it easier to install chassis height adjustment rings. Screws onto the stub axle shaft.

Stub axle ring centering device for 25 mm diameter stub axle with M20 nut. Tool specially designed to make it easier to install hub rings by sliding them into place.

Stub axle ring centering device for 25 mm diameter stub axle with M14 nut. Tool specially designed to make it easier to install hub rings by sliding them into place.

FRONT WHEEL AdjustMENT DISKS

MEKAONE SEAT ADJUSTMENT TOOL

Ref : OU931.003M

Ref : OU931.082

Allows you to check the parallelism and camber of your kart's front wheels. Available in 4 models, Sold as a pair.

For all types of gokarts. Adjustable width and height. Delivered with : - Specific tooling to adjust seat (mounting) brackets - Specific graduated tooling to adjust seatback height

4 models : For 17 mm, 20 mm and 25 mm diameter stub axle - For 3-point hubs

s q

REAR AXLE PUSH

BRAKE BLEEDING PUMP

Ref : OU956.001

Ref : OU951.001

Used to quickly dismantle the shaft without damaging the tip. For 50 mm diameter shaft.

Allows you to rapidly and efficiently bleed your hydraulic brake circuit. For systems without tanks.

MANUAL DRAIN PUMP

Ref : OU955.002

BRAKE BLEEDer

Ref : OU951.002

MEKAONE SPROCKET protection kit

CROWN WHEEL CARRIER

Ref : PC0682.011

Ref : OU953.001

MEKAONE sprocket protection kit of 200 mm diameter (FFSA regulation).

Used to transport all your sprockets with ease.

Included in the kit : 2 aluminium sprocket protection, 1 plastic spacer (thickness: 8 mm), 6 screws, 6 nuts

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

Allows you to work alone, efficiently and cleanly. Operates on the venturi principle. Delivered with an automatic re-supply system, a magnetic support and a bleed screw greasing syringe. Requires a 6 to 12 bar compressed air supply (1/4"" male quick-connect coupling). Container capacity 0.75 L. 60 % vacuum.

NEED SOME HELP ? +33 (0)2 40 38 26 20

105

TOOLS

Tools for karts Camber plates fixed on R3 FRONT LASER SYSTEM.

R3 FRONT LASER SYSTEM

R3 CAMBER PLATES

Ref : OU931.031

Ref : OU931.033

"Front Eagle eye Magtronic" is an advanced laser alignment system for Karts. Features include strong magnets, electronic laser control and power management, upgradable to work with the caster plates and rear alignment system. These lasers are easily upgradeable to work with caster plates (Ref : OU931.033) & the rear magtronic laser units (Ref : OU931.032).

The addition of caster plates enables magtronic users to easily measure the caster angle set. Needs R3 front laser system (Ref : OU931.031).

106

R3 REAR LASER SYSTEM

R3 LASER CHAIN-WHEEL ALIGNER

Ref : OU931.032

Ref : OU931.034

"Rear Eagle eye Magtronic" is designed to work with the front units (Ref : OU931.031) to enable the chassis alignment to be checked. Containing all the superb features as the front units like strong magnets and electronic control.

Laser-sighting device, used to align the chainwheel and sprocket. Very fast and precise.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

107

TOOLS

sous-rubrique

108

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

TOOLS

Tools for tyres

LOW PRESSURE MEKAONE MANOMETER

Ref : OU943.002

Very high precision with plastic shock protector and large dial. Decompression valve for deflating.

VEGA MANOMETER

ROTAX DIGITAL MANOMETER

Ref : OU943.004

Ref : OU943.005

With its graduation from 0 to 2.5 bar, it offers a very high level of accuracy. Deflation valve included.

Digital pressure gauge which not just measures but stores tires pressure. High stability in the measuring. Button for air discharge. Bar and Psi scale. Auto auto-zero setting. Twisted pipes resistant up to 10 Bar. Possibility to memorize and display later the pressure value. 9V battery supply. Plastic covering to shelter the device from any blow. e

FLOOR PUMP

Ref : OU944.002

The ZEFAL floor pump is equipped with a z-switch system : Easily changed from Presta to Schrader or Dunlop valves via a simple switch. This pump has a large gauge with a magnifying lens for easy reading and a long hose to make accessing the valve easier. The large reinforced base increases stability and the handle made from wood with locking hook is very comfortable and very easy to grasp.

INFRARED THERMOMETER

Ref : AC615.005

Connection : Z-Switch / For valve: Presta, Standard (Schrader), Dunlop / Pressure : 12 bar - 174 psi / Barrel : Anodised aluminium / Handle : Natural beech wood / Hose length : 1100 mm - 43'' / Gauge diameter : 75 mm - 3'' / Height : 670 mm - 26.4'' / Weight: 1,1 kg

This infrared thermometer is ideal for measuring track, tyres, exhaust temperatures etc... Until 260°C without contact. Temperature range from -30°C to +260°C. Temperature resolution of 0.1°C. Pick-up time below 1 second.

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

109

TOOLS

Tools for tyres

NSR TYRE IRON

TYRE IRON WITH RACK AND PINION

LEVER-OPERATED TYRE IRON

Ref : OU942.004

Ref : OU942.003

Ref : OU942.002

Revolutionary in terms of speed and simplicity of use, the NSR is used to both fit and remove kart tyres.

Very high strength. Allows both sides of the tyre to be removed simultaneously and effortlessly.

Easy to unstick tyres. Simple, practical and compact.

STAND WHEELS EQUALIZER

Ref : OU941.020

LIGHT WHEELS EQUALIZER

Ref : OU931.004

Weight : 5 Kg

TYRE GREASE

Ref : LU823.003

Makes it easy to fit and glue your tyres.

Weight : 1,65 Kg

Contents : 1 Kg

COLORED PAINT MARKER FOR TYRES

PAINT MARKER FOR TYRES

Ref : AC674.00T

Ref : AC674.001

This liquid paint marker is essential for marking your tyres. It is a xylenefree, low-odor and fast-drying for immediate handling. The paint is indelible and waterproof. The mark size is 3 mm.

Use this white marker to add a personal touch to your tyres. Dries quickly and won't wash off. Colour : White

3 Available Colours : Pink - Yellow - Red

110

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

k j

MANUAL TYRE MACHINE

ELECTRIC TYRE MACHINE

Ref : OU942.012

Ref : OU942.011

For fitting and removing kart tyres. Quick and easy to use without damaging the wheel rim and tyre.Ideal for occasional tyre changes. Dimensions : 420 x 440 x 620 mm. Weight : 25 Kg.

For fitting and removing kart tyres. Quick and easy to use without damaging the wheel rim and tyre. Fitted with a pedal. Essential for regular tyre changes. Requires a 220 V supply. Dimensions : 420 x 440 x 620 mm. Weight : 33 Kg.

PROTECTING SPACER FOR TYRE MACHINE

PLASTIC SPACER FOR TYRE MACHINE

Ref : OU942.021

Ref : OU942.022

Protecting spacer for electric tyre machine (Ref : OU942.011) or for manual tyre machine (Ref : OU942.012).

Plastic spacer for electric tyre machine (Ref : OU942.011) or for manual tyre machine (Ref : OU942.012).

VALVE TOOL

TYRE MEASURING TAPE

Ref : OU941.010

Ref : OU941.001

Tool for fitting tubeless valves.

Allows you to accurately check the circumference of your tyres once fitted.

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

VALVE CORE REMOVER

Ref : OU941.005

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

111

TOOLS

Tools for engines j b

c i

g d e

FUEL JERRICAN

LARGE DIAMETER FUNNEL

CLAMP FOR WATER HOSE

Ref : AC631.00B

Ref : AC633.001

Ref : OU926.008

Steel.

Plastic funnel very practical with his 230 mm diameter. Delivered with hose and filter.

Hose are clamped shut instantly without damage. Plastic structure.

2 sizes : 10L or 20L b

OIL MEASURING BEAKER

SPARK PLUG WRENCH

Ref : AC632.001

Ref : OU913.00D

Graduated beaker. Ideal to make your own mixture.

Standard with ball joint.

Capacity : 500 ml c

16 mm 21 mm

Ref : OU913.004 Ref : OU913.002

OIL MEASURING COLUMN

Ref : AC632.002

SPARK PLUG KEY / SPRINKLERS HOLDER

Ref : OU913.005

Capacity : 500 ml d

MEASURING JUG

Ref : AC632.005

Graduated measuring jug with flexible and removable pouring spout. Ideal for filling of your radiator and of your fuel tank. Equipped with a stopping plug and a plastic cover.

HOSE CUTTING DEVICE

Ref : OU952.002

Allows you to cut hoses to measure. Ø 46 mm.

CARBURETTOR JET BOX

Ref : OU924.008 g

Graduated oil measuring column as % and ml.

This multifunction spark plug key allows you to change your spark plug (size 21) quickly thanks to an excellent handling. This key can disassemble the nuts of Dellorto carburators. You can also tidy up your sprinklers thanks to 12 locations there planned for that purpose, and you can store your needles of carburettors inside there, by getting back them simply, thanks to its magnetized lock.

Plastic box to arrange your jets. Foam interior with 4 holes per size of jets. Delivered without jet. Dimensions of the box: 255 x 195 mm. k

JET GAUGE BOX

Ref : OU924.007

Allows accurate measurement of the jets orifices diameter (box of 100 jet gauges from 1 to 2 mm - 0,01 step).

Capacity : 5 L

112

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

o n l

SPRING HOOK

Ref : OU952.011

CARBURETTOR SPRING TOOL

Used to hold the carburettor spring and the throttle cable while adjusting the needle height. Available for VHSB34 & VHSH30 carburettors.

TANK LEVEL MEASURING TOOL

IAME TOOL FOR PISTON AXIS CIRCLIPS

Ref : PMIA421.018M q

CHAIN TOOL

X30 Ref : OU921.012 Minime ffsa 60cc Ref : PMIA421.018

Ref : OU954.00M

Ref : OU924.01T

CHAIN TOOL FOR KZ ENGINES

Ref : OU954.001

Necessary tool to work safely and to ensure spring mounting without effort. m

Light and very compact. Available for standard chains and KZ chains. Standard chain KZ chain

Ref : OU954.003 Ref : OU954.004

IAME CLUTCH PULLER

IAME ROTOR PULLER

Ref : PMIA421.017

For IAME Minime FFSA 60cc (GAZELLE). w

IAME PISTON LOCKING TOOL

Ref : OU924.010

Ref : PMIA421.001

Ref : PMIA421.019

Used to check the height level.

For IAME Minime FFSA 60cc (GAZELLE).

For IAME X30 and IAME Minime FFSA 60cc (GAZELLE).

CARBURETTOR SLIDE PROTECTION

Ref : OU924.014

Allows to protect carburettor slide and needle. Fits on VHSB34 carburettor.

IAME CLUTCH LOCK WRENCH

Ref : OU914.007

Clutch blocking key for IAME X30. t

IAME PISTON PIN PUNCH

Ref : PMIA421.013M

IAME CLUTCH PULLER

Ref : PMIA421.011M

Iame clutch puller for IAME X30. Before 2013 Since 2013

Ref : PMIA421.011 Ref : PMIA421.014

X30 Ref : PMIA421.013 Minime ffsa 60cc Ref : PMIA421.015

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

113

TOOLS

tools for engines

Rotax

a g

i c

ROTAX JET HOLDER

Ref : OU924.006

The aluminium, red anodized jet holder allows you to arrange your jets. With it´s 2 magnets on the back side, it can be positioned on all magnetic surfaces easily. b

JET GAUGE SET

Ref : PMFR421.020

Facilitates mounting of the exhaust springs. f

ROTAX TOOL TO BLOCK THE CLUTCH PLATE

Ref : PMFR421.033

Ref : PMFR421.031

Allows to control jet gauges. Sizes: from 0,45 mm to 1,50 mm. c

SPRING HOOK FOR ROTAX EXHAUST SPRING

ROTAX VALVE SPRING MOUNTING TOOL

ROTAX dd2 TOOL TO BLOCK THE CLUTCH PLATE

For DD2 engines.

Allows the assembly of the holding spring of the valve membrane.

ROTAX CLUTCH PULLER

Ref : PMFR421.003 d

ROTAX EXHAUST VALVE TEMPLATE

Ref : PMFR421.021

114

ROTAX FIXATION TOOL SPROCKET

Ref : PMFR421.016

Allows to control, on the cylinder, the exhaust valve seat on Rotax Max Racing and DD2 engines.

To remove the cylinder without removing the engine from the chassis. k

Allows you to change the sprocket while blocking the plate in your vise. For 11 to 16 tooth sprocket.

ROTAX PISTON LOCKING TOOL

Ref : PMFR421.002

To block the piston by the spark plug hole. l

ROTAX WRENCH ADAPTER 11/8

Ref : PMFR421.029

For Rotax Max engines (except DD2).

Ref : PMFR421.019

Ref : PMFR421.032

ROTAX CARBURETTOR CONTROL TEMPLATE

Ref : PMFR421.028

Allows the checking of the Dell Orto VHSB34 carburettor height level. m

ROTAX CYLINDER HEAD TEMPLATE

Ref : PMFR421.000

Allows to control the cylinder head of Rotax Max engines. n

IGNITION / CRANK SHAFT TEMPLATE

Ref : PMFR421.036

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

o t q

s v

ROTAX CYLINDER TEMPLATE EXHAUST PORT HEIGHT

Ref : PMFR421.022

Ref : PMFR421.012

Allows to control the exhaust port height of Rotax Max engines. p

ROTAX SPI SEAL OF CRANKSHAFT ASSEMBLY TOOL

ROTAX CYLINDER TEMPLATE EXHAUST PORT

ROTAX SPI SEAL WATER PUMP ASSEMBLY TOOL

Ref : PMFR421.034M

1 2

For Junior EVO cylinder For Max EVO cylinder

Ref : PMFR421.034 Ref : PMFR421.035

ROTAX PISTON CIRCLIP ASSEMBLY TOOL

Ref : PMFR421.008

ROTAX ENGINE SUPPORT

Ref : PMFR421.010

Workshop engine support. Use with the base (Ref : PMFR421.011). v

BASE OF ROTAX ENGINE SUPPORT

Ref : PMFR421.011

For Rotax Max engine shaft.

MEKAONE TOOL TO BLOCK THE CLUTCH PLATE

TIN WIRE 2MM

Ref : PMFR421.027

For Rotax Max engine "SQUISH" control (except Micro-Max).

Ref : PMFR421.017

Allows to control the exhaust port of Rotax Max engines.

Base of workshop engine support. Use with engine support (Ref : PMFR421.010).

MEKAONE VALVE SPRING SUPPORT TOOL

Ref : OU921.025

Ref : OU922.005

For Rotax Max engines (except DD2).

Allows the assembly of the holding spring of the valve membrane.

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

115

TOOLS

Tools for engines

CRANKSHAFTS ASSEMBLY TOOL

COPPER MALLET

Ref : OU921.051

Ref : OU923.004

Ref : OU923.003

For accurate engine volume check. Delivered with the burette stand and the plug insert.

Tool with very accuracy to assemble your crankshafts. Very high quality. 4 holes : diameters 20, 25, 30 mm, Bearing SKF BC1.

1,5kg mallet to center your crankshaft.

116

COMPLETE DIGITAL BURETTE

page for pros

DIGITAL GONIOMETER

HIGH QUALITY DIGITAL GONIOMETER

Ref : OU921.049

Ref : OU921.050

Accurate, practical and economical! Digital display.

Digital goniometer with very accuracy. Very high quality, reliable. Digital display.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

CARBURETTOR PRESSURE GAUGE

MICROMETER

CALIPER GAUGE

Ref : OU924.001

Ref : OU921.01M

Ref : OU921.014

Allows you to calibrate your carburettor. Delivered in its box.

Available in 25 to 50 mm and 50 to 70 mm.

Digital caliper gauge. Accurate to within a 100th.

DIAL GAUGE

IGNITION GAUGE ADAPTOR

Ref : OU921.002

Ref : OU921.016

Very high-precision device (to within a 100th) essential for checks. Dial diameter : 55 mm. Stem diameter : 8 mm.Range : 12.5 mm.

For dial gauge with a stem diameter of 8 mm.

HANDHELD DUAL-purpose MAGNIFIER

DIAL GAUGE MAGNETIC SUPPORT

Ref : OU921.017

MINI-LIGHT FOR ENGINE CHECK-UP

LIGHT BULB FOR MINI-LIGHT

Ref : OU926.006

Ref : OU926.001

Ref : OU926.002

Magnifier can stand on the desk when open, can used as a handle magnifier when folded. Battery : 2 AA (not included) or AC power adapter. Dimensions : 290x100x25mm.

High intensity flexible light.Ideal to look at the piston head. Delivered with a light bulb and protective cover.

Replacement light bulb for mini-light for engine check-up (Ref : OU926.001).

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

117

118

LUBRICANTS / MAINTENANCE PRODUCTS 120 Oils 122 Maintenance products

LUBRICANTS / MAINTENANCE PRODUCTS

Oils

XPS KART TEC FULL SYNTHETIC OIL

XPS SYNMAX FULL SYNTHETIC OIL

Ref : LU817.003

Ref : LU817.004

Official oil of NSK races and Rotax Challenge France for ROTAX MAX, ROTAX MAX MASTER, ROTAX DD2 and ROTAX DD2 MASTER classes. Full synthetic oil for ROTAX engines. Recommended use : 2-3% for Rotax engines.

Full synthetic oil specifically developped for ROTAX engines range. Recommended use : 2-3% for Rotax engines. 1 liter

1 liter

VROOAM FACTORY RACING 2T OIL

XPS max gear oil

xPS DD2 GEAR OIL

Ref : LU820.001

Ref : LU817.008

Ref : LU817.007

High performance 2-stroke kart racing engine oil based on castor and synthetic components. For high-performance, high-RPM 2-stroke racing engines. Ultimate throttle response and increased power output and increased reliability all at the same time. Oil developed in association with TM Racing.

XPS gear oil is especially developed for the Rotax Max high performance kart engines. Reduces wear and is temperature resistant. For the correct dosage follow the engine manufacturer recommendations. Not suitable for kart engines with manual gear-boxes.

XPS DD2 gear oil is especially developed for the Rotax Max DD2 high performance kart engines. Reduces wear and is temperature resistant. For the correct dosage follow the engine manufacturer recommendations.

1 liter

120

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

ELF HTX 976+ OIL

ELF HTX 909 OIL

Ref : LU812.002

Ref : LU812.001

Full synthetic oil developped for 2-stroke racing engine. Avoids clogging of the segments and spark plugs. Its low ash content prevents deposits in the combustion chamber and reduces risks of pre-ignition. Specifically designed for engines with high rpm (from 12 000 to 17 000 rpm). Recommended use : 4-5 % for KZ engines and 2-3 % for Rotax engines.

Semi-synthetic oil developped for 2-stroke racing engine. Avoids clogging of the segments and spark plugs. Withstands high temperatures thanks to its thermal stability and its anti-oxidant power. Specifically designed for engines with high rpm (from 17 000 to 20 000 rpm). Recommended use : 4-5 % for KZ and X30 engines.

1 liter

MOTUL KART GP 2 STROKE OIL

Ref : LU815.000

XERAMIC CASTOR EVOLUTION 2 STROKE OIL i

SILKOLENE GEAR BOX OIL

Ref : LU814.003

Ref : LU811.005

Full synthetic oil specifically developped for 2-stroke racing engine. Recommended use : 4-5 % for KZ engines, 2-3 % for Rotax engines. 1 liter

Xeramic Castor Evolution 2-stroke is a high-tech semisynthetic oil for racing go-kart. It is an advanced kart racing oil for optimal lubrication of all 2-stroke air- or water-cooled kart engines. This unique product has been specifically designed for racing applications where high revolutions, high loads and high temperatures prevail. Recommended use : 4-5% for KZ and X30 engines, 2-3 % for Rotax engines.

Lubricant oil with most advanced characteristics for gear box. Best value for money. Reduces resistance. Prevents clutch slipping and protects components against erosion. SAE 75W-80. 1 liter

1 liter

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

121

LUBRICANTS / MAINTENANCE PRODUCTS

Maintenance products e

c a

MEKAONE CLEANER DEGREASER

MOTUL MOTOWASH

Ref : LU839.001

Ref : LU834.003

MEKAONE special cleaner developed for use by professional race teams. Removes efficient grime, grease, oil, brake dust from plastic, polyester and carbon surfaces.

Very high quality cleaner for all types of support. 1 liter

500 ml b

DASTY classic CLEANER DEGREASER

WD 40 PROFESSIONAL SYSTEM

Ref : LU833.006

Ref : LU837.051

Dasty Classic degreaser is a detergent specifically developed for heavily soiled surfaces. It is very efficient on mineral dirt and easily removes traces of oil, gum and any kind of dirt you can encounter while practicing a mechanical sport.

Innovative product specially developed for professionals, the WD 40 Professional System simplifies application and improves user comfort. Its exclusive dual-position valve is fitted with a "Smart straw" adjustable extension tube. 500 ml

1 liter c

XPS KART CLEANER

Ref : LU838.004M

A highly concentrated and effective biodegradable alkaline cleaner with a unique formulation which removes dirt easily. Completely safe to use on aluminum, chrome, synthetic material, painted surfaces, plastic and rubber parts. 1,5 L pressure spray 5 L tank

Ref : LU838.004 Ref : LU838.005

This product is an all-purpose cleaner designed to quickly cut through traffic film and track grime. This formula leaves a great finish and is sage to use on paintwork, plastic, rubber, aluminium, chrome, carbon fibre and disc pads. Recommended use : Bodywork, Components, Carbon fibre. 500 ml

h d

XPS CERAMIC MULTI SPRAY

Ref : LU838.002

General maintenance lubricant, with high-tech ceramic material, for lubrication and protection of bearings, ball bearings, cables etc. It has excellent waterresistance, great penetrating characteristics and sticks to any surface. Resists high temperatures. Protects against corrosion and preserves rubber parts. 500 ml

122

WD 40 TOTAL WASH

Ref : LU833.008

WD 40

Ref : LU833.00M

Multi-purpose WD 40 is a proven product found in paddocks worldwide.It cleans, protects, lubricates and drives away moisture. WD 40 - 200 ml WD 40 - 400 ml WD 40 - 5 L WD 40 - spray head

Ref : LU833.003 Ref : LU833.004 Ref : LU833.005 Ref : LU833.010

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

i k

q o

XPS VISOR CLEANER

XPS BRAKE CLEANER

Ref : LU838.001

Ref :LU838.006

For thoroughly and effective cleaning of the helmet visor. Removes greasy finger marks and squashed insects without a problem and gives a sparkling finish to the helmet visor.

Biodegradable multi cleaner for cleaning of brake components etc. Contains no chlorinated hydrocarbons. Does not corrode plastic and rubber components. A versatile, high-grade cleaning agent that even dissolves resinified contamination.

200 ml

500 ml

HELMET CLEANING KIT

TYP200 DOT4 BRAKE FLUID

Ref : LU833.002

Ref : LU842.010

Bell helmet cleaning kit including : 250 ml. wax free polish, 250 ml. shield cleaner and 2 microfibre cleaning cloths.

Designed for racing use only (forbidden on open road), this brake fluid "Typ200" DOT4 type, yellow-coloured, is renowned for its great performance and is used by the greatest racing teams.

VROOAM PTFE LUBRICANT

1 liter

Ref :LU839.051

Lubricant including PTFE, provides excellent lubrication, reduces wear and friction for easy rotation performance at high temperatures. This lubricant can handle high pressure loads and won't fling off very quickly from high-speed rotating equipment. Protects against corrosion and is water resistant. 400 ml

XPS DOT4 BRAKE FLUID

Ref : LU842.003

XPS brake fluid DOT4 has been developed for use in all hydraulically operated brake and/or clutch systems where a DOT4 is specified. 250 ml

XPS CARBURETTOR CLEANER

Ref :LU838.003

This cleaner dissolved gum, carbon and varnish deposits without dismantling the carburettor. Suitable for all types of carburettors. 500 ml m

MEKAONE BRAKE CLEANER

Ref :LU839.003

For strong cleaning and degreasing of all mechanical parts and systems. Strong penetrating "dry" cleaning spray to remove dirt. Cleans brakes, carburettors, metal surfaces and other kart parts.

FOAM FILTER OIL SPRAY

Ref : LU832.004

Spray bottle to be used exclusively on the outside of a foam air filter. Features : Improves air filter efficiency for a better fuel burn. Retains dust, mud, sand for a better engine durability. Prevents water from getting into the air filter. Reduces pressure loss at the air intake : increases engine performances. High resistance to contamination and clogging. Dries quickly to prevent dripping. The product is colored to be applied easily. 5O0 ml

500 ml ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

123

LUBRICANTS / MAINTENANCE PRODUCTS

Maintenance products a

c d

XPS SYNTHETIC CHAIN GREASE SPRAY

VROOAM STRONG CHAIN LUBE

Ref : LU827.002

Ref : LU829.002

This synthetic chain spray, based on ceramic material, does not dry-out, it keeps the chain flexible and is heat-resistant.

100% synthetic high performance lubricant. This chain lube has excellent penetration, lubrication properties and sticks to the chain. Contains anti-wear additives and reduces rolling resistance and secures lubrication properties under high temperatures and pressures. Water and rust resistant.

500 ml b

XPS WHITE CHAIN GREASE SPRAY

400 ml

Ref : LU827.001 f

Based on high-tech ceramic material for optimal and long-term lubrication and protection under all circumstances. Great adhesive qualities, superb penetration, corrosion resistance, reduces wear and friction, keeps the chain flexible and is heat resistant. O-ring chain tested. 500 ml c

MOLYKOTE 111

Ref : LU823.008

Assures a sufficient electrical contact between female and male contact pins at any time. Excellent water resistance. 100 g

RK CHAIN GREASE SPRAY

PFG110 GREASE TUBE

Ref : LU825.005

Ref : LU823.004

Very high resistance to high temperatures. Excellent penetration.

Grease specially developed for lubricating moving parts of the braking system.

400 ml d

25 g

MOTUL CHAIN GREASE PASTE

Ref : LU824.002

White lubricating paste with brush applicator tip specially designed to lubricate all kart chains. Avoid fling at high speed. Increases the life of the chain : reduces friction, resists water and salt, prevents from rust. 150 ml

124

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

XPS INSTANT GASKET

243 FRENETANCH LOCTITE

Ref : LU851.005

Ref : LU861.001

XPS black instant gasket is designed to withstands high temperatures up to 250°C (intermittent). Temperature range -73°C up to +250°C. Resists transmission fluids, water, oil and anti-freeze. Low volatile.

Regular strength threadlocker.

200 ml i

732 RTV SILASTIC

Low strength threadlocker.

Silicon transparent mastic for sealing exhausts. 90 ml

CAF 1 GASKET SEALING COMPOUND

648 GREEN LOCTITE

Ref : LU861.003

Bearing bond. High strength. 5 ml

For a perfect seal on engine crankcases. 100 g

BLUE GASKET SEALING COMPOUND

Ref : LU851.001

ALUMINIUM TAPE

Ref : AC675.001

Adhesive tape resistant to high temperatures. Width : 50 mm - Thickness : 50 μ- Roll : 50 m

Sealing compound. 100 g l

10 ml o

Ref : LU851.002

221 PURPLE LOCTITE

Ref : LU861.002

Ref : LU851.003

24 ml

HAND CLEANSER

Ref : AC676.003

8151 ANTI SEIZE LOCTITE

Ref : LU861.004

Lubricant for easy dismantling of exhaust brackets. 50 ml

Hi-tech professional hand cleanser with micrograins for extreme specialist soilings. Advantages : Mixture of esters for cleaning specialist soilings. Solventfree. Skin friendly micrograins for extra cleaning power. Vitamins B5, E for a healthy & supple skin. 250 ml

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

125

126

accessories 128 AIM data acquisition 131 Race numbers and plates 132 Measure instruments and cameras 132 Kart covers 133 Kart accessories and various 134 Trolleys

ACCESSORIES

AIM data acquisition

MYCHRON 5

MYCHRON 5 2t

Ref : AC611.090

Ref : AC611.091

The AIM Mychron 5 is a high-resolution graphical display with integrated GPS and Wifi connection.Logs and stores speed, lap times, gear, temperature, rpm...

The AIM Mychron 5 2T is a high-resolution graphical display with integrated GPS and Wifi connection.Logs and stores speed, lap times, gear, temperature, rpm... Additional features of the Mychron 5 2T : The Mychron 5 2T features 2 temperature sensor inputs, which can be used to measure the water temperature and cylinder head temperature (CHT) or under spark or exhaust gas temperature (EGT). The number of temperature inputs is the only difference between the Mychron 5 2T and this Mychron 5 2T.

COMMON FEATURES Integrated GPS Robust housing with wider display Completely configurable pages

Ambient Light Sensor Calculated Gear Number Wide display with configurable multicolour backlight

IN THE BOX OF THE MYCHRON 5 : Mychron 5 with GPS / M10 water temperature sensor / Extension wire for thermoresistor sensor (TR - water) / Rechargeable lithium battery / Magnetic charger / Plug battery charger / Battery charger wire

Rechargeable Lithium Battery Shift Light and Alarm LED's WiFi connection

IN THE BOX OF THE MYCHRON 5 2T : Mychron 5 2T with GPS / M10 water temperature sensor / 1 double connexion wire (1TC + 1TR) / Rechargeable lithium battery / Magnetic charger / Plug battery charger / Battery charger wire g

h d

MYCHRON 5 BATTERY

Ref : AC611.087

Rechargeable lithium battery. Included in Mychron 5 - 5/2T kit.

128

MYCHRON 5 MAGNETIC charger

MYCHRON 5 PLUG BATTERY CHARGER

EXTERNAL MYCHRON 5 CHARGER without disassembly

Ref : AC611.088

Ref : AC611.075

Plug for the battery charger included in Mychron 5 - 5/2T kit. Delivered without wire (only the plug).

This charger is used to charge the Mychron 5 lithium battery without disassembly. Very easy to use.

MYCHRON 5 BATTERY CHARGER WIRE

SODI STICKER FOR MYCHRON 5

Ref : AC611.082

Ref : AC611.089

Ref : AC701.069

Magnetic charger included in Mychron 5 - 5/2T kit.

Battery charger wire included in Mychron 5 - 5/2T kit.

SODI adhesive sticker for AIM Mychron 5 - 5/2T.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

AIM TYRE TEMPERATURE SENSORS KIT

Ref : AC611.083

The tyre temperature sensors measure the surface temperature of tyres: with a 35° field of view, they sample temperatures between -20 and 120°C and provide a 0-5V output signal.

The four sensors come in a kit including an IR temperature controller device, which is necessary for connection to Mychron 5.

MAGNETIC SENSOR

Ref : AC611.068

The kit includes : · IR (infrared) temperature controller · 4 tyre temperature sensors

M10 WATER TEMPERATURE SENSOR SLEEVE

· External power cable · 2 x 4 pin 712+719 patch cables 1 m · 2 x 4 pin 712+719 patch cables 2 m

EXHAUST TEMPERATURE

Ref : AC611.081

Ref : AC611.060

Included in Mychron 4 and Mychron 4/2T kit. k

Used to fix the M10 water temperature sensor (Ref : AC611.076) on the cooling circuit of engines without M10 hole.

CLIP IGNITION SENSOR

Ref : AC611.043

Included in Mychron 4 - 4/2T and Mychron 5 - 5/2T kit. l

SPARK PLUG TEMperature SENSOR

This sensor is a thermocouple (TC). Wire lenght of 30 cm. Connexion to extension wire TC (Ref : AC611.085) or 2 connexion wire TC and TR (Ref : AC611.079). q

TYPE M5 EXHAUST TEMPERATURE

Ref : AC611.080

Ref : AC611.045

M10 WATER TEMperature SENSOR

Ref : AC611.076

This sensor is a thermoresistor (TR). Connexion to extension wire TR (Ref : AC611.086) or 2 connexion wire TC and TR (Ref : AC611.079). Included in Mychron 5 and Mychron 5 2T kit.

Direct fitting between spark plug and cylinder head. Only for Mychron 4 or Mychron 5 (not used for Mychron 4/2T or Mychron 5/2T). o

SPARK PLUG TEMperature SENSOR FOR 2T

M5 fitting. This sensor is a thermocouple (TC). Wire lenght of 30 cm. Connexion to extension wire TC (Ref : AC611.085) or 2 connexion wire TC and TR (Ref : AC611.079). r

PEDAL POSITION SENSOR

Ref : AC611.069

Ref : AC611.044

Direct fitting between spark plug and cylinder head. Only for Mychron 4/2T or Mychron 5/2T (not used for Mychron 4 or Mychron 5). Connexion to extension wire TC (Ref : AC611.085) or 2 connexion wire TC and TR (Ref : AC611.079).

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

Accelerator / brake pedal position sensor. Connects to Mychron 4 - 4/2T or Mychron 5 - 5/2T via Mychron Expansion (Ref : AC611.049).

NEED SOME HELP ? +33 (0)2 40 38 26 20

129

ACCESSORIES

AIM data acquisition c

d b

2 CONNEXION WIRE TC AND TR

EXTENSION WIRE TR-WATER

Ref : AC611.079

Ref : AC611.086

Double connexion wire (1TC exhaust + 1TR water) included in Mychron 4/2T and Mychron 5/2T.

Extension wire of 1.5 meter for thermoresistor sensor (TR-water). Included in Mychron 4 and Mychron 5 kit.

EXTENSION WIRE TC-EXHAUST

LAMBDA CONTROLLER

Ref : AC611.085

Ref : AC611.071

Extension wire of 1,5 meter for thermocouple sensor (TC-exhaust). Only for Mychron 4 or Mychron 5.

Lambda controller allows to perfectly tune the carburetion of your engine thanks to the analysis of exhaust gas emission. Connects to Mychron 4 - 4/2T or Mychron 5 - 5/2T via Mychron Expansion (Ref : AC611.049) or 4 ways Data Hub (Ref : AC611.051).

130

MYCHRON EXPANSION

DATAhub

DATAKEY

Ref : AC611.049

Ref : AC611.05T

Ref : AC611.046

MyChron Expansion is the channel multiplier improving MyChron 4 - 4/2T or Mychron 5 - 5/2T performances, thanks to four additional channels (Temperature sensors, valve sensor, pedals throttle or brake sensor) and a further connector to connect GPS, LCU Lambda controller, DataKey, etc.

Data hub is a channel multiplier. It connects directly to Mychron 4 - 4/2T and Mychron 5 - 5/2T.

The DataKey is a load key to analysis saved information of Mychron 4 - 4/2T and Mychron 5 - 5/2T. Delivered with Race Studio analysis software.

Available with : 1 2

2 ways 4 ways

AC611.050 AC611.051

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

ACCESSORIES

Race numbers and plates h

b i

APPROVED BLACK RACE NUMBERS

BLACK SMALL SIZE RACE NUMBERS

Ref : PC0642.15N

Ref : PC0642.18N

Self-adhesive numbers pre-cut to the shape of the figure. Black colour. From 0 to 9. CIK-FIA approved.

Italic self-adhesive numbers pre-cut to the shape of the figure. Black colour. From 0 to 9.

Dimensions : 15 x 6 cm b

white SMALL SIZE RACE NUMBERS

Ref : PC0642.19N

Self-adhesive numbers pre-cut to the shape of the figure. White colour. From 0 to 9. CIK-FIA approved.

Italic self-adhesive numbers pre-cut to the shape of the figure. White colour. From 0 to 9.

Ref : PC0642.14N

Maximum numbers dimensions : 16 x 8.5 cm

Colours available: Yellow, Red, Blue and White. Inside dimensions : 20,8 x 20,8 cm j

RACE NUMBERS ON YELLOW VINYL

Ref : PC0642.10N

Self-adhesive numbers pre-cut to the shape of the figure. Black colour with white contour. From 0 to 9.

PLASTIC NUMBER PLATE

Ref :PC0642.05C

Dimensions with the border : 21,5 x 21,5 cm

Dimensions : 12 x 4,6 cm

BLACK RACE NUMBERS

Dimensions : 22 x 21 cm

Ref : PC0642.16N

Dimensions : 15 x 6 cm

YELLOW SELF-ADHESIVE FRONT PANEL

Ref : PC0642.001

Dimensions : 12 x 4,6 cm

APPROVED white RACE NUMBERS

FIXING KIT NUMBER PLATE FOR DD2

Ref : PC0642.009

Used to fix the number plate on a DD2 go kart. Kit containing : 2 hose clamps, 2 screws and 2 nuts

Black numbers on rectangular yellow adhesive vinyl. From 0 to 9. CIK-FIA approved. Yellow vinyl dimensions : 19,8 x 9,8 cm

Height numbers dimensions : 16 cm

red RACE NUMBERS

Ref : PC0642.11N

Self-adhesive numbers pre-cut to the shape of the figure. Red colour with black contour. From 0 to 9. Maximum numbers dimensions : 16 x 8.5 cm ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

131

ACCESSORIES

Measure instruments and cameras c

b a d

AIM MULTICHRON CHRONOMETER

OPPAMA PET-3200R HOUR METER

Ref : AC611.000

Ref : AC611.041

MultiChron stopwatch is an handy and versatile digital lap timer suited for any racing situation that can track up to four different racers simultaneously. Its generous memory lets you record 99 laps per driver with up to 9 splits per competitor per lap.

This OPPAMA PET-3200R hourmeter can measure the cumulative total operating time of the petrol engine. Very practical, light (15 grams) and extra small (30*30*15 mm), you can easily measure the time simply by winding the antenna lead (included in the box) around the ignition cable. Water resistant - Reset function.

UNIPRO UNISTOP CHRONOMETER

AIM SMARTYCAM HD REV. 2.1 CAMERA

Ref : AC611.001

Ref : AC618.006

The Stopwatch Unipro UNISTOP is an effective tool, waterproof. While the timing at your fingertips to time up to 4 drivers per round, with a maximum of 9 split per lap and pilot.

This AIM camera oervlays data from GPS and AIM data acquisition on the videos themselves: Speed, RPM, throttle, engaged gear, acceleration, temperatures, etcâ&#x20AC;¦

kart covers

132

SODI KART RACING KART COVER

BOX'S KART COVER

ROTAX KART COVER

Ref : AC644.005

Ref : AC644.002

Ref : AC644.009

Black Sodi Kart Racing kart cover. Waterproof. Marked with Sodi Kart Racing silk-screen printed logo on both sides and on the front.

Black BOX'S kart cover. Waterproof.

White and black ROTAX kart cover. 100% nylon. Waterproof.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

ACCESSORIES

Kart accessories and various 1

a 2

f 1

k h i d

BOX'S TYRES BAG

KART manual inâ&#x20AC;&#x2030;french

Ref : AC642.003

Ref : LI01.2M

Top-of-the-range vertical opening transport bag. Very strong synthetic material. Transparent window for inserting an identification sheet.

Whether you're a novice or an experienced driver, you'll find everything you need to know about karting in these manuals. Kart Manual chassis : 192 pages Kart Engine Manual vol. 3 : (engines with and without gearbox). 384 pages.

TYRE STACK

Ref : AC642.005

sodi CARPET

Black carpet with charcoal grey edge and SODI logo in the middle. High grip performance due to latex coating. 2 sizes available: 85 x 150 cm or 150 x 200 cm i

rotax CARPET

Ref : AC661.110 1

Puts an end to the problem of transporting your mounted tyres. Can be hooked up for storage. Top-of-the-range finish.

LEAD WEIGHT

Ref : AC664.001T

Kart Manual chassis LI01.021 Kart Engine Manual vol. 3 LI01.026

Black and red Rotax carpet with rubber backing. Sizes : 150 X 100 cm

CABLE TIE

rilsan type

FUEL DRUM CRADLE

Ref : AC651_00P

Ref : PC0711.24T

Ref : AC646.001

These lead weights allow you to perfectly balance the weight of your kart.

Nylon cable tie (Rilsan type) very practical. Black colour. Sold by bags of 100 pieces.

Designed for 25 liters drum. Galvanised steel construction. Safe and confortable racking. Delivered with a drip tray.

1 2

3 sizes available: (l x L) : 2.5 x 100 mm or 4.8 x 250 mm or 7.6 x 450 mm

AC651.001 1 kilo (round) 2 kilos (1/2 moon) AC651.002

k g

TRACKSIDE TABLE

ITAKASHOP CARPET

Ref : AC664.003T

Ref : AC661.101

Folding trackside table. Compact size, ideal for trackside work. Dimensions : L 94 cm / W : 44 cm / H : 89 cm

Black carpet with charcoal grey edge and ITAKASHOP logo in the middle. High grip performance due to latex coating.

GROUND SHEET

3 m x 4,5 m

Ref : AC710.001

This ground sheet 3m x 4.5m is perfect for your paddock tent for a aesthetic finish. 700gr/m2 PVC sheet with eyelet every 40cm. Colour : grey. Supplied with a carrying bag.

2 sizes available: : 85 x 150 cm or 150 x 200 cm

Folded : L : 122 cm / W : 44 cm / H : 12,5 cm ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

133

ACCESSORIES

Trolleys b

MEKAONE KART TROLLEY

Ref : AC661.017

MEKAONE EXPERT LIFT KART TROLLEY

STONE KART TROLLEY

Ref : AC661.014

Ref : AC661.016

Practical and strong chromed steel kart trolley. Suitable for multiple widths of chassis thanks to the adjustable arms. Equipped with 2 rubber swivel wheels (whose 1 with a brake) and 2 rubber solid wheels (diameter of wheelpin : 20 mm). The trolley will fold flat for easy transportation. Possibility to stack the trolleys for space saving. Delivered complete as a kit. Net weight : 15 kg. This trolley supports a maximum weight of 130 kg.

MEKAONE EXPERT lift kart trolley, user friendly. Allows to lift your gokart on the trolley by yourself without effort : Place the 4 plastic holdersunder the frame, tip over the gokart and lock with the lever. Excellent stability and handling thanks to 4 solid polyurethane wheels including 2 frontdirectional wheels. Front brake on the 2 front wheels. The trolley allows an easy access all over the gokart. Plastic tool-box. Easy to fold. Net weight : 17 kg. This trolley supports a maximum weight of 130 kg.

Very easy to handle, highly stable transport trolley under all conditions and on all surfaces. Front directional wheels. The gokart position on the trolley allows an easy access all over the gokart. Plastic tool-box. Easy to fold. Net weight : 13 kg. This trolley supports a maximum weight of 130 kg.

HOLDER FOR STONE KART TROLLEY

Ref : AC662.101

Plastic holder for STONE kart trolley (Ref : AC661.014). Sold individually.

SWIVEL WHEEL FOR MEKAONE TROLLEY

Ref : AC662.01T

Ref : AC662.103

Rubber directional swivel wheel for MEKAONE kart trolley (Ref : AC661.017). Sold individually. 1 2

134

Without brake AC662.010 AC662.011 With brake

HOLDER FOR MEKAONE KART TROLLEY

Plastic holder for MEKAONE kart trolley (Ref : AC661.016). Sold individually

SOLID TROLLEY WHEEL

Ref : AC662.009

Universal polyurethane solid wheel. Fits on most kart trolleys. Not ball-bearings inside but a plastic insert. Diameter of wheel pin: 20 mm. Diameter of wheel: 250 mm Sold individually.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

ELECTRIC KART TROLLEY

DRIV' UP ELECTRIC TROLLEY

WHEEL FOR DRIV' UP TROLLEY

Ref : AC661.015

Ref : AC661.005

Ref : AC662.00M

Electric kart trolley very easy to use. Features : Built in aluminium; 260 mm front wheels puncture proof; 160 mm swivel casters; Removal battery (2 x 12V - 7A/h); 24 V battery charger; Length : 95cm; Width: 75cm; Closed height : 32cm. Net weight : 26 Kg. This trolley supports a maximum weight of 120 kg.

This trolley, in chromium steel, allows the kart to be lifted, loaded and moved by one person. Features : 4 inflatable wheels Ã&#x2DC;260mm with needle roller bearings; Protective covering on the parts in contact with the kart; Wheel lockup by foot lever; Lifting time approx. 25s; Lifting height : 75cm. Delivered with : Gel cell lead / acid battery 24v, 2,9Ah, in a detachable synthetic case. Battery charger 230v/24v 40-cycles autonomy (lifting-setting down) before recharging. Folded dimensions : 110 cm x 80 cm x 30 cm. Net weight 35 kg. This trolley supports a maximum weight of 130 kg.

260 mm inflatable wheel with bearings suitable for all DRIV' UP models. Sold individually. 2 models available : - Standard Model : Fitted in standard with DRIV' UP ONE, DRIV' UP LIGHT, DRIV' UP FIRST and DRIV' UP PRO trolleys. Black colour. - Auto Profil Model : Fitted in standard with DRIV' UP ELECTRIC. Red colour.

VERTICAL KART STOWAGE

DOUBLE VERTICAL KART STOWAGE

Ref : AC663.001

Ref : AC663.002

Allows your kart to be transported and stowed at home, in the paddock and in your vehicle. Center distance between the 2 brackets: 81 cm.

Allows your 2 karts to be transported and stowed at home, in the paddock and in your vehicle. Center distance between the 2 brackets: 81 cm.

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

135

136

TYRES 138 Tyres approved in France 140 Tyres approved to international races

tyres

Tyres approved in France french class : minime

vega cadetti

slick

Ref : PNVE1

FRONT tyre 4.0/10.0-5 REAR tyre 5.0/11.0-5

french class : cadet

BRIDGESTONE YDS

slick

Ref : PNBR31

PNVE1.001 PNVE1.002

FRONT tyre 4.0/10.0-5 REAR tyre 5.0/11.0-5

PNBR31.001 PNBR31.002

french class : nationale

bridgestone ync

slick

Ref : PNBR32

FRONT tyre 4.5/10.0-5 REAR tyre 7.1/11.0-5

BRIDGESTONE YNP

RAIN

Ref : PNBR33

PNBR32.001 PNBR32.002

FRONT tyre 4.5/10.0-5 REAR tyre 6.0/11.0-5

PNBR33.001 PNBR33.002

french class : ROTAXâ&#x20AC;&#x2030;MAX - ROTAX MAX MASTER - DD2 - DD2 MASTER

BRIDGESTONE YLM

slick

Ref : PNBR35

FRONT tyre 4.5/10.0-5 REAR tyre 7.1/11.0-5

138

BRIDGESTONE YNP

RAIN

Ref : PNBR33

PNBR35.001 PNBR35.002

FRONT tyre 4.5/10.0-5 REAR tyre 6.0/11.0-5

PNBR33.001 PNBR33.002

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

tyres

Tyres approved in France french class : KZ2 - KZ2 MASTER - KZ2 GENTLEMaN

LECONT LOZ

slick

Ref : PNLE4

FRONT tyre 4.5/10.0-5

PNLE4.001

REAR tyre 7.1/11.0-5

PNLE4.002

french class : SENIOR - MASTER - GENTLEMAN

KOMET K1H

slick

Ref : PNKO1.00T

FRONT tyre 4.6/10.0-5 REAR tyre 7.1/11.0-5

KOMET K1w

RAIN

Ref : PNKO2.00T

PNKO1.001 PNKO1.002

FRONT tyre 4.2/10.0-5 REAR tyre 6.0/11.0-5

PNKO2.001 PNKO2.002

french class : Endurance

LECONT LH 03 EES

slick

Ref : PNLE3

FRONT tyre 4.5/10.0-5 REAR tyre 7.1/11.0-5

LECONT CIK W LH 06

RAIN

Ref : PNLE2

PNLE3.001 PNLE3.002

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

FRONT tyre 4.2/10.0-5 REAR tyre 6.0/11.0-5

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

PNLE2.001 PNLE2.002

NEED SOME HELP ? +33 (0)2 40 38 26 20

139

tyres

Tyres approved to international races class : KZ

BRIDGESTONE YNB

PNBR34.001 PNBR34.002

CIK & WSK

BRIDGESTONE Ynp

FRONT tyre 4.5/10.0-5 REAR tyre 6.0/11.0-5

class : OK JUNIOR

VEGA XH2

RAIN

class : OK JUNIOR

PNVE25.001 PNVE25.002

class : kz

VEGA W5

CIK & WSK

RAIN

FRONT tyre 4.2/10.0-5 REAR tyre 6.0/11.0-5

PNVE20.001 PNVE20.002

CIK

slick

Ref : PNLE6

FRONT tyre 4.5/10.0-5 REAR tyre 7.1/11.0-5

PNBR33.001 PNBR33.002

Ref : PNVE20.00T

FRONT tyre 4.6/10.0-5 REAR tyre 7.1/11.0-5

LECONT LP

CIK

slick

Ref : PNVE25

140

Ref : PNBR33

FRONT tyre 4.5/10.0-5 REAR tyre 7.1/11.0-5

WSK - OK

slick

Ref : PNBR34

VEGA XM

slick

Ref : PNVE22.00T

PNLE6.001 PNLE6.002

FRONT tyre 4.5/10.0-5 REAR tyre 7.1/11.0-5

PNVE22.001 PNVE22.002

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

ORDER ON-LINE ON WWW.ITAK ASHOP.COM

CONTACT THE NEARESt ITAK ASHOP STORE

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

141

GENERAL INFORMATION

index a

ACCELERATOR CABLE................................................. 100 ACCELERATOR PROTECTIVE SLEEVE........................ 100 ACCELERATOR PROTECTIVE SLEEVE PROTECTION..... 100 AIM ................................................................... 128 to 130 AIR BOX FILTERS..................................................... 88-89 AIR BOX HOLDER..................................................... 88-89 AIR BOX SLEEVE............................................................ 88 AIR BOXES............................................................... 88-89 AIR INTAKE - BELL......................................................... 19 ALLEN KEY................................................................... 104 APRON FOR MECHANIC................................................ 23 AXLE PUSH................................................................... 105 AXLE REINFORCEMENT................................................ 58 AXLE REINFORCEMENT TOOL....................................... 58

BACKPACK - SODI KART RACING................................. 28 BALACLAVA - ALPINESTARS........................................ 37 BALACLAVA - BOX'S...................................................... 37 BALACLAVA - ROTAX.................................................... 37 BALL JOINTS.................................................................. 74 BASE OF ENGINE SUPPORT.......................................... 115 BATTERY.................................................................. 92-93 BATTERY CHARGER................................................. 92-93 BATTERY CONNECTOR.................................................. 93 BEARING HOLDERS....................................................... 59 BERMUDA SHORTS - SODI KART RACING.................... 26 BODYWORK......................................................... 40 to 43 BOOKS.......................................................................... 133 BOTTOM - ALPINESTARS.............................................. 37 BRAKE BLEEDER.......................................................... 105 BRAKE BLEEDING PUMP............................................. 105 BRAKE CABLE................................................................. 71 BRAKE CALIPERS.......................................................... 69 BRAKE CLEANER.......................................................... 123 BRAKE DISKS................................................................. 66 BRAKE FLUID................................................................ 123 BRAKE LINKAGE............................................................. 71 BRAKE PADS.................................................................. 70 BRAKE PARTS................................................................. 71 BRAKE SAFETY CABLE................................................... 71 BRAKE VENT................................................................... 71 BUMPER MOUNTING KIT.............................................. 42 BURETTE....................................................................... 116 BUSH SLEEVE FOR SIDE POD BRACKET........................ 41 BUTTERFLY NUT............................................................ 72

CABIN LUGGAGE- SODI KART RACING........................ 29 CABLE CLAMP................................................................ 71 CABLE GUIDE.................................................................. 71 CABLE TIE.................................................................... 133 CALIPER GAUGE........................................................... 117 CALIPERS...................................................................... 69 CAMBER PILLS.............................................................. 75 CAMERA........................................................................ 132 CAP - ROTAX.................................................................. 33 CAP - SODI KART RACING............................................. 32 CAP FOR SPARK PLUGS................................................. 91 CARBURETTOR CLEANER............................................ 123 CARBURETTOR CONTROL TEMPLATE......................... 114 CARBURETTOR DIAPHRAGM KIT................................. 99 CARBURETTOR JET BOX.............................................. 112 CARBURETTOR PRESSURE GAUGE............................. 117 CARBURETTOR REPAIR KIT......................................... 99 CARBURETTOR RETURN SPRING................................. 99 CARBURETTOR SLIDE PROTECTION.................... 101-113 CARBURETTOR SPRING TOOL..................................... 113 CARBURETTORS............................................................ 99 CARPETS...................................................................... 133 CASTER PILLS............................................................... 75 CHAIN GREASE SPRAY................................................. 124 CHAIN GUARD............................................................... 43 CHAIN GUARD ELASTIC................................................ 43 CHAIN PROTECTION COVER................................... 43-62 CHAIN TOOL.................................................................. 113 CHAINS.................................................................... 60-61

142

CHRONOMETER............................................................ 132 CLEANER DEGREASER................................................. 122 CLIP IGNITION SENSOR - AIM.................................... 129 CLIP LINK FOR CHAIN................................................... 61 CLOCK - SODI KART RACING........................................ 32 CLUTCH CABLE............................................................ 100 CLUTCH LEVER KIT........................................................ 48 CLUTCH LOCK WRENCH............................................... 113 CLUTCH PULLER........................................................... 113 COMPRESSION SPRING................................................ 70 COPPER MALLET.......................................................... 116 COVERS......................................................................... 132 CRANKSHAFTS ASSEMBLY TOOL................................ 116 CROWN WHEEL CARRIER............................................ 105 CYLINDER HEAD TEMPLATE........................................ 114 CYLINDER TEMPLATE.................................................. 115

DATAHUB - AIM........................................................... 130 DATAKEY - AIM............................................................ 130 DIAL GAUGE.................................................................. 117 DIAL GAUGE MAGNETIC SUPPORT............................. 117 DIGITAL BURETTE........................................................ 116 DISK CARRIERS............................................................. 67 DISK PROTECTOR........................................................... 71 DISKS............................................................................. 66 DOT4.............................................................................. 123 DRAIN PUMP............................................................... 105

ELASTIC SECURING STRAP FOR AIR BOX................... 88 ENGINE MOUNT............................................................. 96 ENGINE MOUNT FLANGE............................................... 96 ENGINE SPROCKETS..................................................... 62 ENGINE SUPPORT........................................................ 115 ENGINES............................................................. 80 to 83 EVS RACE COLLAR........................................................ 36 EXHAUST BRACKET...................................................... 95 EXHAUST HOLDER SPRING........................................... 96 EXHAUST HOSE............................................................. 95 EXHAUST INSULATING HOSE....................................... 95 EXHAUST INSULATION................................................. 95 EXHAUST SILENCER............................................... 94-95 EXHAUST SILENCER BRACKET KIT.............................. 95 EXHAUST SILENCER RECHARGE.................................. 94 EXHAUST SILENCER SPRING................................. 94-96 EXHAUST SILENCER SUPPORT.................................... 95 EXHAUST SPRING......................................................... 96 EXHAUST TEMPERATURE - AIM................................. 129 EXHAUST VALVE TEMPLATE........................................ 114 EXTENSION WIRE - AIM.............................................. 130

FASTENING COLLAR FOR WATER HOSE...................... 87 FEMALE TERMINAL....................................................... 93 FILLER CAP FOR TANK................................................... 72 FILLER CAP GASKET...................................................... 72 FILTER FOR FUEL........................................................... 73 FIXATION TOOL SPROCKET......................................... 114 FIXING KIT NUMBER PLATE FOR DD2.................... 42-131 FLANGE FOR FRAME STIFFENER.................................. 43 FLATHEAD SCREW FOR SEAT....................................... 45 FLAT-HEADED GRIPSTER.............................................. 53 FLEECE HAT - SODI KART RACING................................ 32 FLEECE JACKET - SODI KART RACING......................... 27 FOAM FILTER OIL SPRAY.............................................. 123 FOOT PUMP.................................................................. 109 FRONT PROTECTOR....................................................... 34 FRONT STABILIZER FOR FRAME................................... 43 FRONT WHEEL ALIGNMENT DISKS............................. 105 FUEL "Y" PIECE............................................................... 73 FUEL DRUM CRADLE.................................................... 133 FUEL FILTER................................................................... 73 FUEL HOSE..................................................................... 73 FUEL HOSE SECURING CLIP.......................................... 73 FUEL JERRICANS.......................................................... 112 FUEL PUMP................................................................... 101 FUEL RECOVERY DRUM................................................. 73

FUEL RECOVERY DRUM BRACKET................................ 73 FUEL RECOVERY DRUM CAP......................................... 73 FUNNEL......................................................................... 112

GAS PUMP STAND........................................................ 101 GAS SYPHON KIT.......................................................... 101 GASKET KIT FOR FUEL PUMP....................................... 101 GASKET SEALING COMPOUND.................................... 125 GEAR SHIFT KNOB......................................................... 48 GLOVES - ALPINESTARS................................................ 15 GLOVES - BOX'S.............................................................. 14 GLOVES - SODI KART RACING....................................... 14 GONIOMETER............................................................... 116 GREASE......................................................................... 124 GRIPSTERS.................................................................... 53 GROUND SHEET........................................................... 133 GRUB SCREWS............................................................... 76

HAND CLEANSER.......................................................... 125 HAT - SODI KART RACING............................................. 32 HEAD SUPPORT............................................................. 36 HEAD SUPPORT COVER................................................. 36 HEEL RESTS.................................................................... 77 HELMET BAG - ARAI....................................................... 21 HELMET BAG - BELL........................................................ 21 HELMET BAG - BOX'S...................................................... 21 HELMET BAG - SPARCO.................................................. 21 HELMET BUCKLE - BOX'S.............................................. 20 HELMET CLEANING KIT.......................................... 21-123 HELMET VISOR SCREW - BOX'S.................................... 20 HELMETS - ARAI............................................................ 18 HELMETS - BELL............................................................ 18 HELMETS - BOX'S.......................................................... 20 HIGH-TEMPERATURE PAINT........................................ 96 HIGH-TEMPERATURE VARNISH................................... 96 HOLDER FOR KART TROLLEY...................................... 134 HOOK WRENCH............................................................ 104 HOSE CUTTING DEVICE............................................... 112 HOUR METER................................................................ 132 HUB CENTERING DEVICE.............................................. 54 HUB SPACER.................................................................. 57 HUB STUB...................................................................... 57 HUBS.................................................................... 54 to 57

IAME ENGINES.............................................................. 82 IGNITION GAUGE ADAPTOR........................................ 117 IGNITION TERMINAL LUGS.......................................... 93 INFRARED THERMOMETER........................................ 109 INSTANT GASKET......................................................... 125

JACKET - SODI KART RACING...................................... 30 JERRICANS................................................................... 112 JET GAUGE BOX............................................................ 112 JET GAUGE SET............................................................. 114 JET HOLDER.................................................................. 114

KART CLEANER............................................................. 122 KART COVERS............................................................... 132 KART MANUALS.......................................................... 133 KART TROLLEYS................................................... 134-135 KEY CHAIN - SODI KART RACING................................. 28 KZ CLUTCH LEVER KIT................................................... 48

LAMBDA CONTROLLER - AIM..................................... 130 LASER SYSTEM............................................................ 106 LEAD FINGER................................................................. 53 LEAD WEIGHTS....................................................... 53-133 LIGHT BULB.................................................................. 117 LIGHT DOWN JACKET - SODI KART RACING................ 32 LIGHT FOR ENGINE CHECKUP...................................... 117

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

LOCTITE........................................................................ 125

MAGNETIC SENSOR - AIM.......................................... 129 MAGNIFIER................................................................... 117 MALLET......................................................................... 116 MANOMETERS............................................................. 109 MANUALS.................................................................... 133 MARKERS...................................................................... 110 MASTER CYLINDER....................................................... 69 MEASURING JUG.......................................................... 112 MECHANICS GLOVES.................................................... 23 MICROMETER............................................................... 117 MINI-LIGHT FOR ENGINE CHECKUP............................ 117 MYCHRON - AIM.......................................................... 128 MYCHRON BATTERY - AIM.......................................... 128 MYCHRON CHARGER - AIM......................................... 128 MYCHRON EXPANSION- - AIM................................... 130 MYCHRON STEERING WHEEL....................................... 48

NASSAU PANEL - KG...................................................... 40 NASSAU PANEL BRACKET............................................ 40 NUMBER PLATES.......................................................... 131 NUMBERS..................................................................... 131 NUTS................................................................... 53-57-76

OFFICIAL SODI SUIT..................................................... 09 OIL MEASURING BEAKERS.......................................... 112 OILS........................................................................ 120-121 OPEN SOCKET................................................................. 71 O-RINGS KIT FOR GRIPSTER........................................ 53 OVERFLOW BOTTLE....................................................... 87

PAD SECURING SCREWS.............................................. 70 PADS.............................................................................. 70 PAINT - HIGH-TEMPERATURE...................................... 96 PAINT MARKERS.......................................................... 110 PED KIT- ARAI............................................................... 19 PEDAL EXTENSION......................................................... 77 PEDAL POSITION SENSOR - AIM................................ 129 PEDALS........................................................................... 77 PISTON CIRCLIP ASSEMBLY TOOL........................ 113-115 PISTON LOCKING TOOL................................................ 113 PLUGS FOR PEDAL......................................................... 76 PLUGS FOR TUBE........................................................... 76 PLUNGER FOR TANK...................................................... 73 POLO SHIRT - SODI KART RACING............................... 26 POLYESTER REPAIR KIT................................................ 46 PRESSURE GAUGE........................................................ 117 PTFE LUBRICANT......................................................... 123 PULLEY FOR WATER PUMP............................................ 87

QUILTED JACKET - SODI KART RACING........................ 31

R3 CAMBER PLATES.................................................... 106 R3 FRONT LASER SYSTEM.......................................... 106 R3 LASER CHAIN WHEEL ALIGNER............................ 106 R3 REAR LASER SYSTEM............................................ 106 RACE COLLAR................................................................ 36 RACE NUMBERS........................................................... 131 RADIATOR BRACKETS.................................................. 86 RADIATOR CAPS............................................................ 86 RADIATORS................................................................... 86 RAIN CLOAK.............................................................. 23-24 RAIN GLOVES................................................................ 25 RAIN OVERSHOES......................................................... 25 RAIN SUIT...................................................................... 24 RAIN X............................................................................. 21 REAR AXLE BEARING.................................................... 59 REAR AXLE PUSH........................................................ 105 REAR AXLE REINFORCEMENT...................................... 58 REAR AXLE REINFORCEMENT TOOL............................ 58 REAR BUMPER............................................................... 42 REAR BUMPER MOUNTING KIT.................................... 42 REAR PROTECTION....................................................... 42 REAR SPROCKETS......................................................... 62 ORDER ON-LINE ON WWW.ITAK ASHOP.COM

RECHARGE FOR EXHAUST SILENCER........................... 94 REINFORCING SEAT WASHERS.................................... 45 REPAIR KIT FOR SEAT................................................... 46 RETROFIT KIT ISOLATING MAT.................................... 95 RIBS PROTECTOR - ALPINESTARS............................... 35 RIBS PROTECTOR - BOX'S....................................... 34-35 RILSAN TYPE............................................................... 133 ROLLER BEARINGS........................................................ 59 ROTAX ENGINES...................................................... 80-81 ROTOR PULLER............................................................. 113

SAFETY CABLE............................................................... 71 SCREWDRIVERS.......................................................... 104 SCREWS......................................................................... 76 SCREWS KIT - ARAI....................................................... 19 SCREWS KIT - BELL....................................................... 19 SEAT ADJUSTMENT TOOL........................................... 105 SEAT PADS KIT.............................................................. 45 SEAT PROTECTION PLATES.......................................... 45 SEAT SECURING KIT..................................................... 46 SEAT SPACERS.............................................................. 46 SEAT STIFFENER........................................................... 46 SEATS - TEKNEEX.......................................................... 44 SEATS - TILLETT............................................................ 44 SELF-ADHESIVE FOAM FOR SEAT................................ 45 SERFLEX AIR BOX CLAMP............................................. 88 SHAFTS.......................................................................... 58 SHEATH STOP......................................................... 71-100 SHIM FOR STEERING WHEEL........................................ 49 SHIMS FOR HUB............................................................. 57 SHOES - ALPINESTARS............................................. 16-17 SHUTTER BLIND FOR RADIATOR.................................. 86 SIDE POD - KG................................................................. 41 SIDE POD BRACKET........................................................ 41 SILASTIC...................................................................... 125 SILENCER BRACKET...................................................... 95 SILENCER BRACKET KIT............................................... 95 SILENCERS.............................................................. 94-95 SOCKET SET................................................................. 104 SOCKET WRENCH........................................................ 104 SOFTSHELL JACKET - ROTAX....................................... 33 SOFTSHELL JACKET - SODI KART RACING................... 31 SPARK PLUG CAPS........................................................ 91 SPARK PLUG TEMPERATURE SENSOR - AIM............. 129 SPARK PLUGS.......................................................... 90-91 SPI SEAL OF CRANKSHAFT ASSEMBLY TOOL............. 115 SPI SEAL WATER PUMP ASSEMBLY TOOL................... 115 SPLIT PINs.................................................................... 70 SPOILER - KG.................................................................. 40 SPOILER BRACKET........................................................ 40 SPOILER BRACKET KIT................................................. 40 SPOILER CLAMPS.......................................................... 40 SPOILER FLANGE........................................................... 40 SPRING FOR EXHAUST SILENCER................................ 94 SPRING HOOK......................................................... 113-114 SPRINKLERS HOLDER.................................................. 112 SPROCKET CARRIERS............................................. 64-65 SPROCKET PROTECTION KIT................................ 62-105 SPROCKETS................................................................... 62 STEERING WHEEL - MYCHRON..................................... 48 STEERING WHEEL BRACKET......................................... 49 STEERING WHEEL COVER............................................. 48 STEERING WHEEL-MOUNTED ACCELERATOR KIT...... 48 STEERING WHEEL-MOUNTED CONTROL KIT............... 49 STEERING WHEELS....................................................... 48 STICKER FOR MYCHRON - AIM................................... 128 STICKER FOR RADIATOR.............................................. 86 STICKER FOR WHEEL RIMS........................................... 53 STIFFENER BRACKET.................................................... 46 STUB AXLE RING CENTERING DEVICE............. 57-74-105 STUB AXLE SHAFT SCREW CENTERING DEVICE.. 74-105 STUB AXLE SPACER................................................. 57-74 STUB AXLES................................................................... 74 SUITS - ALPINESTARS.............................................. 10-11 SUITS - BOX'S............................................................. 8-12 SUITS - OFFICIAL SODI................................................... 9 SUNGLASSES - SODI KART RACING............................ 29 SWEAT-SHIRT - ROTAX................................................. 33 SWEAT-SHIRT - SODI KART RACING............................ 27

CONTACT THE NEARESt ITAK ASHOP STORE

TANK CONNECTOR........................................................ 73 TANK FILLER CAP.......................................................... 72 TANK LEVEL MEASURING TOOL.................................. 113 TANK PLATE................................................................... 72 TANK PLUNGER.............................................................. 73 TANK PROTECTOR......................................................... 73 TANKS............................................................................ 72 TAP TO ADJUST FUEL RETURN............................... 73-101 TAPE.............................................................................. 125 TEAR OFFS - ARAI.......................................................... 19 TEAR OFFS - BELL.......................................................... 19 TEE SHIRT - ROTAX........................................................ 33 TEE SHIRT- SODI KART RACING................................... 26 TEFLON SEAT SPACERS................................................ 46 THERMOMETER........................................................... 109 TIE RODS......................................................................... 74 TIN WIRE....................................................................... 115 TM ENGINES.................................................................. 83 TOP - ALPINESTARS...................................................... 37 TOP SPOILER - BELL...................................................... 19 TORQUE WRENCH........................................................ 104 TRACKSIDE TABLE...................................................... 133 TRANSMISSIONS............................................... 60 to 65 TRAVEL ROLLER BAG - SODI KART RACING........... 28-29 TROLLEY WHEELS................................................. 134-135 TROLLEYS............................................................. 134-135 TROUSERS - SODI KART RACING................................. 30 TUBELESS VALVE.......................................................... 53 TURBO VISOR................................................................ 25 TYRE GREASE............................................................... 110 TYRE IRON.................................................................... 110 TYRE MACHINE............................................................. 111 TYRE MEASURING TAPE............................................... 111 TYRE STACK................................................................. 133 TYRE TEMPERATURE SENSORS KIT - AIM................. 129 TYRES.............................................................. 138 to 140 TYRES BAG................................................................... 133

UMBRELLA - ROTAX................................................ 25-33 UMBRELLA - SODI KART RACING............................ 25-32 UNDERWEAR................................................................. 37 USB FLASH DRIVE......................................................... 28

VACUUM PIPE.............................................................. 100 VALVE CORE REMOVER................................................. 111 VALVE SPRING MOUTING TOOL............................ 114-115 VALVE TOOL................................................................... 111 VARNISH- HIGH-TEMPERATURE.................................. 96 VERTICAL KART STOWAGE......................................... 135 VISOR CLEANER...................................................... 21-123 VISOR FASTENING KIT - BOX'S.................................... 20 VISORS - ARAI............................................................... 19 VISORS - BELL............................................................... 19 VISORS - BOX'S............................................................. 20

WASHERS....................................................................... 76 WATER HOSE.................................................................. 87 WATER HOSE SLEEVE.................................................... 87 WATER PUMP................................................................. 87 WATER PUMP BELT........................................................ 87 WATER PUMP SUPPORT................................................ 87 WATER SYPHON KIT...................................................... 87 WATER TEMPERATURE SENSOR - AIM....................... 129 WATER TEMPERATURE SENSOR SLEEVE - AIM......... 129 WD40............................................................................ 122 WEIGHTS................................................................ 53-133 WET WEATHER GLOVES................................................ 25 WHEEL BEARING..................................................... 53-54 WHEEL RIMS........................................................ 50 to 52 WHEELS EQUALIZER.................................................... 110 WHEELS FOR KART TROLLEY............................... 134-135 WINDBREAKER JACKET - SODI KART RACING............ 30 WOODRUFF KEYS........................................................... 58 WRENCH...................................................................... 104

"Y" PIECE........................................................................ 73

SHIPMENTS WITHIN 24H (see the practical guide page 4)

NEED SOME HELP ? +33 (0)2 40 38 26 20

143

GENERAL INFORMATION

GENERAL SALEs CONDITIONS

Article 1: DESIGNATION Hereinafter: The Vendor is SODIKART SAS, listed in the NANTES Register of Trade and Companies as No. 320 922 800, with its registered office at Parc d’Activités des Hauts de Couëron – BP 60 - 44220 COUËRON – France. The Purchaser is the Vendor’s customers, whether acting on a professional basis or as individuals. Article 2: SCOPE - INFORMATION - AGREEMENT These General Conditions of Sale (hereinafter the "GCS") are the sole basis of the trade negotiations between the Vendor and the Purchaser. Their purpose is to set out the terms under which the Vendor supplies its Products to the Purchasers and they apply, unconditionally and unreservedly, to all sales made by the Vendor to the Purchasers, whether direct or through its online store, www.itakashop.com (hereinafter referred to as the "Website"). Pursuant to Article L. 441-6, paragraph 1 of the French Commercial Code, the GCS are systematically forwarded to any Purchaser upon request so that said Purchaser can place an order with the Vendor. They can also be accessed on the Website. Any Product order sent to the Vendor implies, on the part of the Purchaser, unreserved acceptance of these GCS, acknowledgement of full awareness of said GCS and waiver of the right to apply own terms of business. The Vendor reserves the right to modify the GCS at any time. In such cases, the GCS applicable to the Purchaser are those in force on the date the order is placed. Article 3: SPECIAL CONDITIONS OF SALE The special conditions granted to the Purchaser only apply if they have been approved, in advance, by the Vendor. Only the points specifically mentioned in said express prior, written agreement constitute a waiver of the GCS which, in all other respects, applies in full. Article 4: DEFINITION, USE AND AVAILABILITY OF THE PRODUCTS 4.1. Product Features The Products offered for sale by the Vendor, both in its brochures and catalogues and on the Website, are described as accurately, and in as much detail, as possible. The Purchaser alone is responsible for choosing and purchasing a Product, referring to the Product description in brochures, catalogues or on the Website, to identify its main features prior to placing any orders. It is also Purchasers’ responsibility to request any additional information required to check that the Product meets their needs and corresponds to the use for which it is intended. Product photos, irrespective of their medium, are not contractually binding. 4.2. Availability The Product offers shown by the Vendor in its brochures and catalogues, as well as on its Website, are valid while stocks last. The vendor reserves the right to withdraw or modify a product, at any time, without prior notice. Should all, or some, of the Products prove to be unavailable after the order has been placed, the Purchaser will be notified that the Product(s) is/are unavailable and that the entire order, or part of the order, has been cancelled. In the event of full, or partial, cancellation of the order: - The order is approved and the Purchaser’s bank account debited for the full amount of the order; - The Vendor informs the Purchaser that the order has been cancelled and offers to renew the order, unless the Product is not available; - The Products that are available are delivered to the Purchaser; - The Purchaser is reimbursed for the price of the Product that has been ordered but is unavailable as soon as possible and, at the latest, within 30 days of payment being made. Pursuant to Article L. 121-11 of the French Consumer Code, the Vendor reserves the right to refuse, for any legitimate reason, any order placed by a Consumer purchaser that it has reason to suppose is conducting a business activity in relation to the Products ordered or, more generally speaking, including in relation to Professional buyers, any abnormal order within the meaning of related case law. Article 5: ORDER 5.1. Website sales Purchasers can select one or more Products from the different categories available on the Website. Before confirming their order, Purchasers shall check the details of their draft order and correct any errors. Once a firm order has been placed, Purchasers are deemed to have knowingly accepted the contents and terms of their order, these GCS, the fact that their order involves an obligation to pay, as well as the prices, volumes, features, quantities and delivery times of the Products offered for sale and ordered by the Purchaser. Any firm Website order placed by the Purchaser constitutes the formation of a distance selling contract between the Vendor and the Purchaser. Once Purchasers have placed a firm order, they can no longer cancel and the order is final (subject to the Consumer purchaser’s right of withdrawal under the terms provided for by the "Right of withdrawal” clause below). Firm orders placed by the Purchaser are confirmed by the Vendor by email. Upon receipt of confirmation that their order has been accepted by the Vendor, Purchasers are responsible for checking the accuracy of the order and notifying the Vendor of any errors immediately, the confirmation being presumed to conform to the order unless a written complaint is received from the Purchaser within 48 hours of its receipt. 5.2. Physical sales The order shall be made in writing by any means (letter, email, fax) duly signed by the Purchaser. To be valid, the order shall be complete and shall specify the quantity and nature of the Products. Orders placed by the Purchaser subsequent to a prior offer issued by the Vendor shall conform to said offer, in every respect, otherwise the Vendor reserves the right to refuse to honour all, or part, of the order that does not conform to said offer. In any event, the sale is only valid once it has been expressly accepted, in writing, by the Vendor, as evidenced by a written order acknowledgement (letter, email, fax). Upon receipt of the order acknowledgement, Purchasers are responsible for checking that the order recorded by the Vendor matches their purchase order and for notifying the Vendor, immediately, of any errors, the acknowledgement being presumed

144

to conform to the order unless a written complaint is made by the Purchaser within 48 hours of its receipt. Article 6: PRICE Unless otherwise specified in writing and approved in advance by the Vendor, the prices shown are those of the price list in force on the date the order is placed. This price list may be amended by the Vendor, at any time, without prior notice. The prices in the catalogue are EXW, inclusive of VAT, excluding packaging and delivery charges. Article 7: SALES REBATES AND ALLOWANCES Professional buyers may receive the rebates and allowances shown in the Vendor's price list, depending on the quantities purchased or delivered by the Vendor in one single delivery, to one location, or depending on the regularity of their orders. Article 8: PAYMENT Any order implies a payment obligation. 8.1. Terms Unless otherwise specified, in writing, by the Vendor, the price of Products ordered on the Website is payable in full, in one payment and without discount, when the order is placed by the Purchaser, irrespective of the delivery method selected. 8.2. Methods The Purchaser can pay for Products ordered on the Website using one of the following methods: - bank card; - by PAYPAL; - by gift voucher, given that gift vouchers distributed during competitions cannot be combined and are only valid for specific accounts, gift vouchers distributed during National Series Karting (NSK) and Challenge Rotax are limited to one voucher per order, and that gift vouchers distributed during FFSA events are limited to one voucher per customer account. For other orders, in the event of payment by cheque, the Purchaser's payment will not be deemed final until the cheque has cleared and the Vendor has received the amounts owing. Cash On Delivery payments are made by cheque made payable to the Vendor, either paid at the post office or handed to the deliveryman. Payments by bank card are made by entering the Purchaser’s card number, whose account is debited, in the currency and at the rate of exchange in force at the bank in question. The Vendor is credited in EUROS. No discount is given for payment in cash, nor for payment prior to the scheduled due date. Should the Purchaser's credit rating be downgraded, the Vendor reserves the right to modify the terms of payment, demand guarantees or a cash payment, before processing the order. Article 9: LATE PAYMENT OR NON-PAYMENT Any late payment of amounts owing by the Purchaser after the payment deadline shown on the invoice sent to it shall automatically result, without any formalities or prior formal notification, and without prejudice to any course of action that the Vendor may be entitled to pursue, in: - outstanding amounts falling due immediately; - demand, under a penalty clause, for compensation of 10% of the amounts due, exclusive of VAT; - demand for a fixed fee of €40 to cover recovery costs, the Vendor reserving the right to ask the Purchaser for additional compensation should the recovery costs actually incurred exceed this amount, subject to the presentation of documentary evidence; - the application of late payment interest at the contractual rate which is the legal rate of interest, plus 5 percent, - the application of the retention of ownership clause set out below, at the Vendor's discretion. In the event of late payment, the Vendor reserves the right to suspend all outstanding orders place by the Purchaser, in accordance with the provisions of Article 1219 of the French Civil Code. Should payment still not have been made within 8 days of a formal demand for payment, sent by recorded delivery letter, stating the intention to apply this clause, remain unheeded, the sale shall automatically be cancelled, at the Vendor's discretion. Said Vendor may ask for the Products to be returned and may keep any down payments made as compensation, without prejudice to any other compensation payments. Article 10: PERSONAL DATA In accordance with Law No. 78-17 of 6 January 1978, amended by Law No. 2004-801 of 6 August 2004 on data protection, on 06/04/2015 the Vendor made a prior declaration (declaration No. 10 86 86 3) to the French Data Protection Authority (CNIL) regarding the processing of its Purchasers’ personal data, in accordance with simplified standard No. 48 (CNIL deliberation No. 2005-112 of 7 June 2005 leading to the creation of a simplified standard on automated processing of personal data relating to the files of customers and prospective customers – OJ No. 149 of 28 June 2005). In the event of the purchase being made on the website direct, the Vendor collects and processes personal data, as well as managing the cookies policy. These cookies make it possible to monitor purchasers’ browsing habits, to update their baskets and to recognise them on their next visit as well as securing their connection. Article 11: DELIVERY 11.1. Methods Delivery is made in accordance with the order, either by direct handover of the Product to the Purchaser, or by simple notification of availability, either by delivery to a forwarding agent or to a carrier in the Vendor's local area. Whatever the delivery method selected by the Purchaser, the Products ordered under the GCS are delivered to the address indicated by the Purchaser as the delivery address on the order in question, the Purchaser being obliged to provide precise details of the various address components and being responsible for any related inaccuracies or errors. 11.2. Delivery time The Products are delivered within the deadlines stated on the order and confirmed by the Vendor’s email, subject to total or partial lack of availability of the Products as set out in the "Availability" clause above. Delivery times depend on the delivery service selected, the delivery address indicated by the Purchaser as well as the date

on which payment is received. Any delivery may be subject to prior fulfilment by the Purchaser of its payment obligations in relation to previous invoices that are still outstanding. Missed delivery deadlines shall not entitle the Purchaser to compensation of any kind, nor to any price deduction or cancellation of any orders in progress. 11.3. Legal provisions in the event of delivery deadlines being missed in respect of Consumer purchasers Pursuant to Articles L. 216-2 and L. 216-3 of the French Consumer Code, in the event of the delivery deadline indicated on the order placed by a Consumer purchaser being missed due to any reason other than force majeure or as a result of the Purchaser’s own actions, said Purchaser shall be entitled to cancel the order under the following circumstances: - after sending a formal demand to the Vendor’s Customer Service department for delivery to be made within a reasonable additional period of time and provided that said formal demand remains unheeded; - if the Purchaser proves that this delivery deadline was an essential requirement of its Order. The formal notification or demand for cancellation of the order shall be addressed by the Purchaser to the Vendor by recorded delivery letter to the address indicated in the "Designation” clause above. In the event of the sale contract being cancelled under the aforementioned circumstances, the Vendor shall reimburse the Purchaser for all the amounts paid, at the latest, within 14 days of the date on which the contract was terminated. Article 12: ACCEPTANCE The Purchaser is responsible for checking the apparent condition of the package and the Products upon delivery. Should there be any anomaly in relation to the package (damaged, open, etc.) or the Products ordered (missing, damaged, faulty, non-compliant, etc.), the Purchaser shall, without fail, report the damaged or missing items, and submit any claims or reservations to the Vendor’s Customer Service department, by recorded delivery letter or email, as soon as possible and, at the latest, within 3 working days of receiving the Products. The Purchaser shall also notify the carrier of said anomaly, in accordance with the deadlines and in the form that may have been set by the latter and, at the latest, within 3 working days. The Purchaser shall provide any evidence of the defects or anomalies noted (especially photographs) and shall give the Vendor every opportunity to investigate these defects and to find a solution. Once 3 working days have passed since receipt of the Products and in the event of failure to perform such formalities on the part of the Purchaser, no claims can be validly accepted and the Products delivered by the Vendor shall be deemed to be free from any obvious defect and compliant with the order, both in terms of quantity and quality. Article 13: RETURNS Subject to Consumer purchasers exercising their right of withdrawal, any Product return shall be expressly approved, in advance and in writing, by the Vendor. Any Product returned without such approval shall be kept at the Purchaser’s disposal and shall not result in any credit or compensation being given. The Purchaser is responsible for the costs and risks of return. No returns shall be accepted once 15 days have elapsed since receipt of the Products. Products shall be returned in their original packaging, unused and accompanied by the original delivery note. If, after receipt and inspection of the goods, the Vendor confirms that they are indeed non-compliant or defective, they will be exchanged or a credit note will be compiled, at the Vendor's discretion. Article 14: TRANSFER OF OWNERSHIP Ownership of the Products shall only be transferred to the Purchaser upon receipt of payment in full. Article 15: TRANSFER OF RISKS 15.1. For Consumer purchasers: Whatever the date of transfer of ownership of the Products, related risks of loss and deterioration shall only be transferred to the Consumer purchaser once physical possession of the Products is actually taken, transportation of said Products being at the Vendor's own risk. 15.2. For Professional buyers: As soon as the Products are dispatched from the Vendor’s warehouses, any risk of loss and deterioration in relation to the Products is transferred to the Purchaser, even if the transport is paid for by the Vendor. If necessary, the Purchaser is responsible for taking out insurance to cover the Products being delivered against any risks likely to result in their loss or deterioration and for exercising any right of recourse against the carrier in the event of damages being noted to packages, under the terms provided for in the "ACCEPTANCE" clause above. Article 16: RIGHT OF WITHDRAWAL (for Consumer purchasers only) Pursuant to Article L. 221-18 of the French Consumer Code, Purchasers have 14 days from receipt of the Product ordered on the Vendor's website in which to exercise their legal right of withdrawal in respect of the Vendor, without having to give a reason for the decision to withdraw. Purchasers shall inform the Vendor, within the aforementioned 14-day period, of their wish to withdraw by sending the Vendor a withdrawal form, a template for which is on the website www. itakashop.com (shown at the end of the GCS), by email or by post. The Purchaser shall then return the Product to the Vendor in perfect condition, without undue delay and, at the latest, within 14 days of notification of its decision to withdraw, using the original packaging and sending the package by recorded delivery post to the Vendor's address. Pursuant to Article L. 221-23 of the French Consumer Code, the direct cost of returning the Product shall be borne by the Purchaser. Should Purchasers exercise their right of withdrawal in the form and within the deadlines provided for in this article, they may obtain a refund of the price of the Product returned as well as the delivery costs of the order, from the Vendor, at the latest, within 14 days of the date on which the Vendor was informed of the Purchaser's decision to withdraw. The Vendor may defer reimbursement until the Product to which the withdrawal relates has been recovered or until the Purchaser has provided proof of having sent back the Product,

whichever is the earliest. The Vendor shall make this refund using the same method of payment as that used by the Purchaser for the original transaction, unless the Purchaser expressly agrees otherwise and provided that the refund does not incur costs for the Purchaser. The right of withdrawal does not apply to Products packaged according to the Purchaser's own specifications or that have been clearly personalised, as well as Products whose sealing has been opened by the Purchaser after delivery and which cannot be sent back for health and safety reasons. Article 17: INTELLECTUAL PROPERTY All items of information contained in catalogues, sales or technical brochures,quotes, projects and studies, as well as on the Vendor's Website and, including but not limited to, the general body of the website, text, photographs, animated or unanimated images and downloaded items are, and remain, the exclusive intellectual property of the Vendor. Any total or partial reproduction, amendment or use, for whatever reason and on whatever medium, of the items of information contained in catalogues, sales or technical brochures or any content appearing on the Vendor's Website, is strictly prohibited without the Vendor's express, prior, written approval. Any simple or hypertext link to the Vendor’s Website is strictly prohibited, without the Vendor’s express, prior, written approval. Article 18: RETENTION OF OWNERSHIP The transfer of ownership of Products sold is subject to the effective and full payment by the Purchaser, on the scheduled due date, of the principal, interest and costs. Any late or non-payment gives the Vendor the right, at its discretion, to take back the Products immediately or to cancel the contract, retaining any advance payments already received as compensation, without prejudice to any other reparation. Purchasers shall then continue to be responsible, without recourse against the Vendor, for costs already incurred between initial receipt of the Products and their return, in full, to the Vendor. Since the Products continue to be owned by the Vendor until full payment of the sums owing, the Purchaser is prohibited from disposing of said Products, particularly for the purposes of resale, or from processing said Products or from using them as collateral. If the Products have been processed or integrated into other items, the latter become the Vendor's property as a security until the price has been paid in full. Since the Products continue to be owned by the Vendor until full payment of the sums owing, the Purchaser is prohibited from disposing of said Products for the purposes of resale or processing. Article 19: GUARANTEES The Products offered by the Vendor are: - guaranteed against hidden defects, as defined by Article 1641 et seq. of the French Civil Code; - covered by a legal guarantee of conformity, as defined by Article L. 217-4 et seq. of the French Consumer Code, where the Purchaser is acting in the capacity of consumer. The following are not covered by the aforementioned legal guarantees: - Products that have been modified, repaired, integrated or added by the Purchaser; - Products with obvious defects upon delivery; - and Products damaged during transportation or due to incorrect use. 19.1. Legal guarantee against hidden defects The Vendor is bound by the guarantee against hidden defects covering the Products sold where said defects render the Products unfit for the purpose for which they were intended by the Purchaser, or which diminish this use to such an extent that the Purchaser would not have purchased the Products or would only have paid a lesser price for them, if such defects had been known. In the event of a Product having a hidden defect at the time of sale, the Purchaser has two years from discovery of said defect in which to invoke the Vendor's guarantee. The Vendor then agrees, at the Purchaser's discretion, once the defect has been assessed: - either to reimburse the Purchaser for the full price of the Product that has been returned; - or to reimburse the Purchaser for part of the Product price if the Purchaser decides to keep the Product. 19.2. Legal guarantee of conformity for Consumer purchasers The Vendor is responsible for Products that are non-compliant upon delivery, as well as for non-compliance as a result of packaging, assembly instructions or installation where it is contractually liable for installation or where installation is carried out under its responsibility. In order to comply with the contract, the Product shall: 1) Be fit for the use ordinarily expected of a similar product and, where applicable: - correspond to the description given by the Vendor and possess the qualities that the Vendor displayed to the Purchaser in the form of a sample or model; - display the qualities that a purchaser may legitimately expect as a result of public declarations made by the Vendor, the Manufacturer or by its representative, notably in advertising or labelling; 2) Or have the features set out by mutual agreement between the Vendor and the Purchaser or be fit for any special use sought by the Purchaser, of which the Vendor was made aware and to which it agreed. Action for non-compliance can only be instituted within two years of delivery of the goods. Under the legal guarantee of conformity, the Vendor agrees, at the Purchaser's discretion: - depending on the stocks available, either to replace the Product with an identical product; - or to reimburse the price of the Product should it prove impossible to replace. Please note that, under the legal guarantee of conformity, the consumer: - has two years from delivery of the goods to institute proceedings against the vendor; - may choose to have the goods repaired or replaced, subject to the cost conditions laid down by Article L. 217-9 of the French Consumer Code; - is not required to prove the existence of the non-compliance of the goods within 24 months of delivery of the goods, this deadline being set at 6 months for goods sold second hand.

The legal guarantee of conformity applies irrespective of any commercial guarantee that may cover the Product. Lastly, please note that consumers may decide to invoke the guarantee against hidden defects affecting the goods sold within the meaning of Article 1641 of the French Civil Code and that, in this eventuality, they may choose between cancelling the sale or reducing the sale price in accordance with Article 1644 of the French Civil Code. Article 20: LIABILITY 20.1 Capacity Before placing an order, Purchasers declare that they have full legal capacity, enabling them to be bound by these GCS. The Vendor cannot, under any circumstances, be held responsible for checking Purchasers’ legal capacity, such that should persons without legal capacity order the Vendor's items, their legal guardians would be fully liable for said order and, in particular, for honouring payment of the purchase price. 20.2. Limitation of liability The Vendor cannot be held liable for obligations arising from the GCS in the event of failure to meet its obligations being caused by a third party, even if this was foreseeable, due to the fault of the Purchaser or the occurrence of force majeure as defined by Article 1218 of the French Civil Code. Information accessible on the Website is issued as it stands, with no guarantees of any kind as to its fitness for the Purchaser's planned use. In any event, the Vendor cannot, under any circumstances, accept liability for direct, or indirect, damage caused by the Product and, including but not limited to, the following situations: - if the Product is used in unsuitable or unusual conditions or contrary to the instructions for use of the Product supplied by the Vendor or different from those specified in the quote and/ or for which the Product was manufactured; - in the event of faulty maintenance and/or maintenance not in accordance with the maintenance instructions supplied by the Vendor; - if the Product has been modified by the Purchaser or by any third party and this was not planned or specified by the Vendor; - normal wear and tear of the Product. Article 21: USE OF CUSTOMER ACCOUNT FOR ONLINE SALES Purchasers agree to keep online transactions secure, in particular, by not disclosing their user name and/or password which shall be kept strictly confidential. On this basis, the Vendor cannot accept liability for disclosure by Purchasers of personal information to any individual using their user name and/or password. Use of the Purchaser’s user name and/or password serves as proof of the Purchaser’s identity and provision of a bank card number and final order confirmation are proof of the Purchaser’s acceptance of said order and that the corresponding amounts are owing. The Vendor cannot accept any liability in the event of fraudulent use of this information. Unless proven otherwise, the data recorded in the Vendor’s IT system act as evidence of all communications, orders and payments between the Purchaser and the Vendor. Article 22: FORCE MAJEURE The Vendor cannot accept liability for delayed or non-fulfilment of its obligations due to unforeseen circumstances or events beyond its control, in particular natural events, deeds or acts of government or public authorities, labour disputes, fires, or the non-arrival of supplies. Article 23: OTHER PROVISIONS Should one or more provisions of the GCS prove to be invalid or be declared as such in application of a law, a regulation or as a result of a final ruling of a competent court, the other provisions shall retain their full force and scope. The fact that the Vendor or the Purchaser has not taken action against the other for failure to meet any one of the obligations referred to under the GCS cannot, in the future, be interpreted as a waiver of the obligation in question. Article 24: APPLICABLE LAW By express agreement, these GCS and the transactions arising from it are governed exclusively by French law, whatever the Purchaser’s country of residence, the place where the order was placed or the delivery location of the Products. Article 25: COMPLAINTS - DISPUTES 25.1. Consumer purchasers For any complaints about Product orders, Purchasers are invited to contact the Vendor’s Customer Service department: - By telephone: +33(0)2 40 38 26 20 - By fax: +33(0)2 40 38 26 21 - By email: sodikart@sodikart.com - Or by post: SODIKART Customer Service Parc d'Activités des Hauts de Couëron 11 rue des imprimeurs BP 60 44220 COUËRON FRANCE Any disputes that may result from purchase or sale transactions entered into in accordance with these GCS and concerning their validity, their interpretation, their performance, their cancellation or their consequences and repercussions, in summary proceedings or in proceedings on the merits, even in the event of multiple defendants, and which cannot be settled out of court by the Vendor and the Purchaser, shall come under the sole jurisdiction of the competent French courts, in accordance with the rules laid down by the French Code of Civil Procedure. 25.2. Professional buyers Any dispute that may result from these GCS concerning their validity, their interpretation, their performance, their cancellation, their consequences and repercussions, shall come under the sole jurisdiction of the NANTES (44) Commercial Court, whether in summary proceedings or proceedings on the merits, including in the event of the introduction of third parties or multiple defendants, without any jurisdiction clause that may appear in the Purchaser’s documents being able to prevent this clause from being applied. General terms of sale applicable as at 01/07/2018.

PRICES SUBJECT TO CHANGE WITHOUT PRIOR NOTICE - VISIT OUR WEBSITE FOR CURRENT PRICES : WWW.ITAK ASHOP.COM

In our shops through our ITAKAshop network

Need some advice? +33 (0)2 40 38 26 20 Shipments within 24h home or pick up point in France

ITAKA shop - 11 rue des imprimeurs - 44220 COUÃ&#x2039;RON - France

Graphic design - Layout : benoitf.com

Order online on www.itakashop.com