Test4pass
Expert
In
IT
Certification
Exams
partition on the target device. B. Boot WindowsPE and use the ImageX.exe tool to apply the WIM file to an NTFS file system formatted partition on the target device. C. Boot Image Builder Wizard (IBW) and use the XCopy.exe tool to copy the WIM file to an NTFS file system formatted partition on the target device. D. Boot Image Builder Wizard (IBW) and use the ImageX.exe tool to apply the WIM file to an ExFAT file system formatted partition on the target device. Answer: B
9. You are developing a Windows Embedded Standard 7 image for 50 target devices. Each device will use a different type of plug-and-play printer. You need to ensure that the final image contains only the driver for the type of plug-and-play printer attached to the device. What should you do? A. Add a synchronous command that invokes the DPInst.exe tool during the auditUser pass to install the driver for the plug-and-play printer attached to the device. B. Create an answer file and set Windows Embedded/PnPCustomizationsWinPE for the DriverPaths element to the share location of the driver files. Run the Sysprep /unattend:"answerfile.xml" command.Restart the device. C. Create an answer file along with the Windows Embedded/PnPSysprep setting for the PersistAllDeviceInstalls option set to TRUE. Allow the plug-and-play manager to install the plug-and-play printer driver.Restart the device. D. Run the Sysprep /audit /reboot command on the image. Install all given plug-and-play printer drivers. Run the Sysprep /generalize /oobe /shutdown command. Capture and deploy the image. Attach the plug-and-play printer to the device before the image is installed to the device. Answer: D
10. You are deploying a Windows Embedded Standard 7 custom image to 5,000 target devices over a network. You need to automate the process of installing custom files and folders during image installation. What should you do? A. Install the standard image by using Image Builder Wizard (IBW). Copy the custom files and folders from a network-accessible share to their location on the target. Run the Sysprep /oobe command.
http://www.test4pass.com Leading the way in IT Certification Exams