UTC 2019 Program

Hosted by:

The 25

Organizing partners:

th

Underwater Technology Conference

SUBSEA AND BEYOND - the power to transform

PRIME MINISTER OF NORWAY

At UTC 2019, Erna Solberg will talk about Ocean Industries and the total energy perspective from a political angle.

YOUNG @ UTC 2019

PANEL DEBATE DAY 1

This year we are proud to welcome students and young job-seekers to YOUNG@UTC

Subsea technology's role in the future sustainable energy picture

Main Sponsors:

Sponsor Partners:

1

CONFERENCE INFORMATION

FREE WIFI TO UTC DELEGATES: Wifi: UTC 2019 Password: underwater CONFERENCE PROCEEDINGS: Presentations will be published for conference delegates at www.utc.no during week 33.

Password: utc2019 TRANSPORTATION TO THE AIRPORT: Airport shuttle after the conference: Immediately after the conference, 13 June, busses will depart outside Grieghallen directly to the airport.

Taxi: Security at the entrance can help call for taxies Bus service: The bus station is only a 4 minute walk from Grieghallen; Bergen Bystasjon. Ask Help Desk for assistance if necessary.

HELP DESK: Please contact technical organizer Medvind Eventbyrå Vest if you have any questions. The Help Desk is located at the entrance.

USEFUL PHONE NUMBERS: Medical emergency: 113 Police: 112 Fire: 110 Bergen Taxi: 07000 Norgestaxi: 08000 LUNCH AND REFRESHMENTS: You will find coffee and refreshments in the Exhibition area from morning till afternoon. Lunch is also served in the Exhibition area.

ALLERGIES: All buffets have allergen listings. Please contact the waiters if any questions.

THE EXHIBITION'S OPENING HOURS: Wednesday 12. June: 10:30 – 16:00 Thursday 13. June: 09:00 – 14:30

CONTACT PERSONNEL: PROJECT MANAGER Janne Bolstad E-mail: janne@medvind.no

EXHIBITION MANAGER Marianne Boge E-mail: marianne@medvind.no

PROJECT COORDINATOR Ann Kristin Åkerlund E-mail: annkristin@medvind.no

ADVISOR Sasja Haven E-mail: sasja@medvind.no

BOOKING Lene Vikre E-mail: lene@medvind.no

ADVISOR HOSPITALITY Linn Campbell Schreuder E-mail: linn@medvind.no

SALES Kristoffer Relling E-mail: UTC@medvind.no

ONSITE MARKETING Malin Nilsen E-mail: malin@manimedia.no

2

TECHNICAL ORGANIZER MEDVIND VEST AS Eidsvågveien 150 NO-5105 Eidsvåg Norway E-mail: utc@medvind.no

To get an immediate response, please contact us through the UTC app

CONTENTS Welcome 4|

Parallel Session #3 - June 13 27-29|

Greetings from the UTC program committee 4

Parallel Session #4 - June 13

The Underwater Technology Fundation 5|

Student Presentations

31|

Welcome from GCE Ocean Technology 6|

Organizing Partners of UTC 2019

36|

"Subsea and beyond - the power to transform" article 8-9|

UTC Subsea Award 2019 37|

Global Centres of Expertise Subsea 7|

UTC Programme Committee 38-39|

Confident but not complacent 9|

Exhibitor List 40-43|

Getting down to it 12|

Exhibition Floor Map 44|

Subsea Market Insight Day 16|

Map of Bergen City Centre 45|

Icebreaker at UFS Verftet - 11 June 17|

Notes 46-47|

Program Day 0 - June 11 18|

UTC 2019 Sponsors and Partners 48|

29-31|

Conference Dinner - June 12 19| Program Day 1 - June 12 20| Program Day 2 - June 13 21| UTC@YOUNG Program 22| Parallel Session #1 - June 12 23-25| Parallel Session #2 - June 12

25-27|

3

WELCOME TO UTC 2019 THE UNDERWATER TECHNOLOGY FOUNDATION WELCOMES YOU TO THE 25TH UTC Welcome to UTC 2019, the 25th Underwater Technology Conference (UTC). Since its beginnings, in 1980, UTC has gained international recognition as a meeting place for the world’s leading companies in underwater technology. Yearafter-year, participants at UTC have highlighted the high-quality presentations and networking opportunities, and the opportunities to develop new relationships, knowledge and business.

From the very beginning, the focus at UTC has been on the potential to push the boundaries of subsea technology for the oil and gas industry. Going forward, UTC is looking to do the same for offshore renewables. We now have a broader energy perspective.

This year’s theme for UTC is “Subsea and beyond – the power to transform”. It indicates that we can build on the strength we have in subsea technology development in the oil and gas industry and use it to empower the transformation we are facing in the years ahead, both in terms of the energy transition and in other key areas, such as digital transformation.

Over the generations, ocean industries have shown the ability to adapt, innovate and develop new technology. Our Market Insight seminar, on Day 0 of UTC, will elaborate on the entrepreneurship needed to achieve the next transformation. We’ll also hear perspectives on the industry outlook, transition and transformation scenarios.

The Market Insight seminar will be followed by our Icebreaker event, which always provides excellent networking opportunities.

The networking will continue in the conference exhibition area; the focal space for conference delegates and visitors throughout UTC. We try out best to make your time at UTC as rewarding as possible. If you have any ideas how we can make it better, please let us know.

The Underwater Technology Foundation (UTF) is a noncommercial entity and is the joint organizer of UTC, alongside GCE Ocean Technology. The foundation’s mission is to increase the level of competence within underwater technology and its related disciplines, by developing and disseminating knowledge through arranging conferences, trade shows and meetings, and by contributing to research and education. Please have a look at the separate section about UTF in the program.

4

UTF and GCE Ocean Technology extend our great appreciation to all the committee members, moderators, presenters and panelists at UTC, for their efforts and their contribution towards the quality of this year’s conference. We would also like to extend a big thank you to all of the individuals that have contributed to the success of all of the preceding 24 UTC conferences. Thank you.

We are very pleased and honored to welcome you to Bergen and to the 25th UTC. On behalf of UTF Hans-Erik Berge Chair of the UTF Board

GREETINGS FROM THE UTC PROGRAM COMMITTEE ON BEHALF OF THE UNDERWATER TECHNOLOGY CONFERENCE PROGRAM COMMITTEE, THE UNDERWATER TECHNOLOGY FOUNDATION AND CO-HOST GCE OCEAN TECHNOLOGY, OUR PARTNERS, SPONSORS AND EXHIBITORS, WELCOME TO UTC 2019.

While this is our 25th conference, UTC is in fact 39 years old this year, having first been held in 1980. Underwater technology has always been at the core of UTC. But, there is also a bigger picture.

The UTC committee recognises that we are facing potentially challenging and changing markets. Some companies have already started to look to different sectors, such as offshore wind and fish farming. They’ve also explored alternative strategies, such as introducing new business models and contracting strategies. While this activity was driven by the downturn, we feel this is something that will continue and grow.

This year, therefore, as well as our core focus on subsea technology, the event, under the theme ‘Subsea and Beyond – the Power to Transform’, will debate the current global challenges that will shape the future of the industry, including energy transition, the increasing role of gas and the development of ocean renewable technologies, as well as to how to make the industry attractive to next generations of talent.

technical sessions, exhibition and networking opportunities.

This year, we’re also featuring speakers chosen by the UTC Youth Committee, as part of our drive to bridge the perceived gap between the industry and the young people who are its future. So, sit back and soak up in the top-level views alongside the detailed technical discussion, get involved and network during our regular breaks and lunches and be sure to visit our exhibitors.

On Wednesday night, come and celebrate our industry and meet your peers at our Conference dinner, during which we will present the annual Underwater Technology Conference Subsea Award.

Meanwhile, don’t forget to take in some of the sights of our host city, Bergen.

On behalf of UTC Program Committee Jon Arve Sværen Chair UTC 2019 Program Committee

There is no question that our industry will continue to develop in the years to come. Emerging and growing industries, such as offshore renewables, will need support from our versatile, innovative and adaptive subsea industry towards achieving success and maturity in the total ocean space.

Where are you placed in the future energy mix? What can your company do in this perspective? What are you doing to promote the industry, to attract the best talent? These are the questions you should be asking yourself. This week, we are not going to have all the answers, but, we have prominent speakers lined up to offer their strategic perspectives, alongside the extensive parallel

5

Harald Pettersen - Statoil ASA ©

UNDERWATER TECHNOLOGY FOUNDATION SINCE 1980, BERGEN HAS SERVED AS THE HOST CITY FOR THE WORLD’S OLDEST UNDERWATER TECHNOLOGY CONFERENCE. THE DRIVING FORCE BEHIND THE EVENT IS THE UNDERWATER TECHNOLOGY FOUNDATION (UTF), WITH THE CONFERENCE NOW BEING JOINTLY HOSTED BY UTF AND GCE OCEAN TECHNOLOGY UTF is a non-commercial entity, established in the 1980s, when several major companies and organizations joined forces to arrange a conference focused on subsea technology in Bergen. Back then, the subsea industry was in its infancy and the foundation was the first in the world to put on a conference solely focused on this sector.

UTC – AN INTERNATIONAL NETWORKING ARENA Ever since the first Underwater Technology Conference (UTC), UTC has been a regular event in Bergen, in the middle of a region that has developed in to a world leading ocean technology cluster. For the first 30 years, UTC was held biennially. From 2010, it has been an annual event, gathering between 600 and 1000 participants annually, many come from the world’s major producing basins, from Brazil to the Gulf of Mexico, and from West Africa to Australia.

This June’s UTC 2019 will yet again be an international meeting point for the world’s leading underwater technology companies in the energy industry. New technologies will be presented, and industry challenges discussed.

THE FOUNDATION PROMOTES KNOWLEDGE, EXPERIENCE TRANSFER AND NETWORKING A core purpose of the UTF is to increase competence within underwater technology and related disciplines. This is to be achieved through developing and disseminating knowledge,

through conferences, trade shows and meetings, and by contributing to research and education. Events like the UTC, which includes an exhibition open to everyone interested in learning more about underwater technology, plenary and panel sessions and a wide-ranging technical programme, as well as excellent networking opportunities, help us to achieve this goal. In addition, the foundation may hold additional meetings and exhibitions, and will contribute to research and training at university level.

GRANT To fulfil our commitment to furthering university level research and training, the Foundation offers a grant, which applicants in need of financial support towards their underwater technology research or training projects can apply for. We would like to encourage applications from students and professionals with relevant projects.

UTF Today, the UTF consists of the following companies and organizations: Equinor ASA, Aker BP ASA, Aker Solutions ASA, One Subsea, TechnipFMC, Subsea 7 ASA, DNV GL, NORCE, NUI, GCE Ocean Technology, NPF, DNB ASA and the Municipality of Bergen.

UTF Board: Hans-Erik Berge, DNV GL – Chairman of the Board Stig Instanes, TechnipFMC Jarle Daae, Aker Solutions Marie Bueie Holstad, CMR Owe Hagesæther, GCE Ocean Technology Tor Willgohs Knudsen, Equinor

www.utc.no/utf 6

A BIG WELCOME TO ALL PARTICIPANTS FROM GCE It is a great pleasure to welcome all participants to the 25th Underwater Technology Conference in Bergen.

GCE Ocean Technology is proud to co-host the UTC Conference for the third time where the theme; Subsea and beyond – The power to transform is, more than ever, a valid theme for the industry and our cluster.

Since 2014, our cluster, and the industry, has indeed shown that it has the power to transform beyond subsea; Solutions from the oil and gas industry are now being used in both the marine and maritime industry: Sensors and cameras are helping seafood farmers controlling fish lice and water quality, and know-how and technology from the subsea industry is frequently being used to develop renewable energy in offshore wind parks.

However, there is still a lot to be transformed, so we are looking forward to meeting the industry at UTC and learning more about programme themes like “What’s next for the subsea market?”, how we can “engineer the future” and be presented with gamechanging products and services.

AWARDS ON BEHALF OF THE CLUSTER As in previous years, GCE Ocean Technology will present two awards at UTC; Best Student Award and Subsea Upcoming Company of the Year Award: THE SUBSEA UPCOMING COMPANY OF THE YEAR AWARD is a cooperation between GCE Ocean Technology, Sparebanken Vest and the Underwater Technology Foundation. The objective is to contribute to the development and commercialisation of new and growing companies with products, concepts and services within the subsea industry.

THE BEST STUDENT AWARD IS AN AWARD given to the Best Student taking the Bachelor in Subsea Technology at the Western Norway University of Applied Sciences (HVL). The award is a cooperation between GCE Ocean Technology, Sparebank 1 SRBank and the Underwater Technology Foundation.

Bringing the industry together is a core value of the Underwater Technology Conference and also a hard core value of ours. We hope you will enjoy the conference and we are looking forward to seeing you at the conference and welcoming you at our stand.

www.gceocean.no

7

Subsea and beyond - the power to transform

FROM ITS HUMBLE BEGINNINGS IN THE OFFSHORE OIL AND GAS INDUSTRY, JUST 50 YEARS AGO, NORWAY HAS BECOME A FRONT RUNNER IN SUBSEA TECHNOLOGY DEVELOPMENT. While through its early years, it leaned on expertise from Houston, Norway now supplies high-end technology and expertise to the world. Yet, there are major changes coming within the industry, driven by global trends.

Since the first UTC, in 1980, we have tracked the ups and downs of the subsea industry. Today is no different. In the short term, there’s been a welcome increase in activity following four long years in a downturn. The industry continues to re-shape itself, seeking cleaner, more automated and intelligent solutions against a backdrop in which climate change and its implications are discussed daily.

Our theme this year is Subsea and beyond – The power to transform and our agenda includes discussion of the new environment we’re in, including energy transition, the increasing role of gas, the development of ocean renewable technologies, and our own industry’s sustainability within this framework.

So, where are we today? “The downturn has really made some scars, international oil companies are in general investing in smaller projects than they were 5-6 years ago and they are really considering the bottom line. There is more optimism,” UTC programme committee member Bjørn Kåre Viken says. However, there are already signs of cost creep.

8

It’s a concern. Cost has very much been on Equinor’s agenda, even before the oil price crashed, and if it’s not kept in check subsea will face strong competition from alternative solutions. Where huge strides have been made in subsea processing technologies, now there needs to be an effort to better industrialise, standardise and simplify, to keep costs down, says Viken.

Equinor is developing an open standard for its underwater drone re-charging station so that all vehicle vendors and all operators can use it. It’s also keen to make sure future all-electric subsea systems are standardised. Indeed, operators are working together on joint specifications for future all-electric systems so that there’s an ability to standardise from day one, avoiding the issues faced in the past with non-standard interfaces and ‘black boxes’.

But, there are always more than one side to any story. “This year has been better for most companies, contracts have been signed, but the prices and the competition have increased, so it’s hard to make good business,” says Owe Hagesæther, chief executive at UTC co-host GCE Ocean Technology. “Energy companies need to allow the supply chain to have profitable contracts or there will be problems; inability to fulfil contracts, quality issues. On the other side, contractors, suppliers need to prepare themselves for hard competition and try to establish new related markets for themselves, such as in offshore wind, so that they have more than one leg to stand on.”

Companies could also look at alternative business models, as some such as CCB Subsea have already done, establishing service

rental models, and working with smaller nimbler companies, such as Aker Solutions working with FSubsea, says Hagesæther.

Committee member Tim Crome highlights Technip and FMC’s joint venture Forsys, which led to the two business’ merger, and its iEPCI (integrated EPCI) offering. Crome says: “We launched iEPCI about three years ago through the Forsys joint venture, and it’s taken off, in many ways more than expected. It has its appeal to all different sizes of operator.” It’s an enabler for small operators, but it’s also been popular with larger players he says, because it means they can retain smaller project teams when the upturn comes.

But, there are also broader factors at play. “While costs and future standards must be controlled, the industry also needs to adapt further towards the energy transition and climate change,” adds Viken. It’s a theme very much rising up on the broader industry agenda. “Greta Thunberg (the Swedish teenage climate activist) has started something that we as an industry need to pay attention to,” says Viken. “In Equinor, we fully accept being a part of the problem, when it comes to emissions. But, we definitely want to be part of finding the solution to it as well.

“One of the ways to obtain this is by doing more remote operations and to implement digital solutions,” he says; digitalisation, automation and use of robotics. Another is to reduce carbon emissions by using floating wind energy parks to provide power for offshore production facilities. Remotely operated subsea factories and/or unmanned facilities will also support this goal, as well as reducing risk and operational costs. CO2 taxes, on a global scale, would further drive these kinds of development, significantly lower ring carbon footprints, he adds.

Hagesæther. “There are new operators in Brazil, in addition to Petrobras, the market is opening up and it’s being to be an exciting opportunity for the Norwegian supply chain,” he says.

There are concerns about skills and attracting new talent into the industry, which will mean looking at how the industry presents itself. But, the industry’s changing operating paradigm - to more remote, digitalised operations - could alleviate some of those concerns, Viken suggests. With the digital revolution happening, there will also be different types of skills needed, he says. “And those skills are available. Unmanned installations, onshore operation centres and updating existing fields require a lot of digital capability and competency. This opens a new chapter for our industry,” he says. “I believe we are going towards lean, smaller operations, taking advantage of digital technology and remote operations – subsea and unmanned - from onshore.”

Written by Elaine Maslin

Elain Maslin

© DNV GL

If companies can maintain their edge through new models and even markets, their real strength –subsea technology – will have future markets. Indeed, while the Norwegian Continental Shelf is on most of their doorsteps, there’s are huge possibilities ahead in growing but also challenging markets such as Brazil, says

Listen to DNV GL’s expert presentations and meet us at Stand #38

Special demonstration: see how we qualify subsea materials

n Establishing a new recommended practice for subsea

n explore the value and benefits of qualification and testing

n Safety 4.0: demonstrating the safety of novel subsea

technologies - Tore Myhrvold, 13 June, 13:30-14:00 n WIN WIN – oil and gas join forces with offshore wind

- Marte Aaberg Midtsund, 13 June, 13:30-14:00 n DNV GL’s Energy Transition Outlook 2018-2050

– Sofia Wilhelmsson, 12 June 11:30-12:00,

of materials in harsh and sour environments n hear from experts with decades of experience in materials

testing for subsea equipment n Learn from failures and investigations we have undertaken

on various equipment and materials.

For more information and to register your place, visit: dnvgl.com/UTC2019

SAFER, SMARTER, GREENER

9 Subsea stand presentation advert_230519.indd 1

24/05/2019 09:21:27

17288_GD 23.05 2019

pumping system: Sofia Wilhelmsson, 13 June, 10:00-10:30

DNV GL will demonstrate how we qualify subsea materials in our Materials & Corrosion Technology Centre in Bergen, on 11 June at 11:30 – 13:00. You will get the opportunity to:

The energy dilemma requires ground breaking solutions. This is where you come in.

10

Equinor is an international energy company developing oil, gas, wind and solar energy.

Our task is to provide the energy the world needs, while supplying it in the most sustainable and responsible way. It’s not an easy job, but we believe that with the right people, passion and curiosity, we will enable the transition to a new energy future.

We’re up for the challenge.

Are you? equinor.com/careers

11

THE FUTURE OF SUBSEA IS HERE SUBSEA CONNECT is focused on fundamentally improving the economics of subsea fields. We have aligned our interests with yours. Our unique approach drives early engagement to connect all the dots from Day 1, from reservoir to topsides and through the life of the field. Our portfolio influences 80% of project cost drivers, and Subsea Connect can reduce economic development point by an average of 30%—unlocking 16 billion barrels of otherwise unreachable reserves.

Dive into the future of subsea at bhge.com/subsea-connect Radically optimized

Outcome engineered

BHGE_Subsea_Conncect_UTC_Program-210x150-052119.indd 1

12

Life-of-field solutions

2019-05-23 10:58 AM

Book cover of "Getting Down To It - 50 years of subsea success in Norway by Kristin Øye Gjerde and Arnfinn Nergaard.

NORWAY'S SUBSEA HISTORY is a tale of pioneering spirit and drive, innovation and

boldness, and world class technology solutions and engineering skills. It’s about staking out an unexplored route, and about the way Norway – despite harsh weather conditions, deep waters and strict government regulation – has moved from importing subsea equipment for its Ekofisk field in 1971 to become a leading exporter of underwater technology worldwide in 2019.

Kristin Øye Gjerde

Arnfinn Nergaard

Subsea wells currently account for about half of Norway’s offshore oil and gas production.

But Norwegian offshore technology also has a substantial transfer value to related activities such as offshore wind power, aquaculture and seabed mining. This sector will thereby provide the basis for new industrial development in coming decades. Knowing where the industry has come from will be valuable for understanding its present position – and where it is heading. Underwater technology is not only an important element in the oil and gas industry, but also a key part of Norwegian industrial and contemporary history.

This book has been written for a broad audience, is copiously illustrated and presents developments partly chronologically and partly thematically. The story of Norwegian subsea technology has both a national and an international market. It is being published in separate and parallel English and Norwegian editions, and will be relased at UTC's exhibition 12th of June.

13

Capital-Efficient Subsea Solutions Production Tree

Unified Controls

Lead time: 12 months

Lead time: 12 months

Pump Lead time: 18 months

Wellhead Lead time: 6 months

Manifold Lead time: 18 months

Connection System Lead time: 6 months

Redefine economic viability with a new approach to subsea production.

The OneSubsea portfolio of standardized designs supports streamlined processes, documentation, and manufacturing to deliver integrated production systems that enable achieving first oil as soon as 24 months after contract award.

Customized to your field architecture, these capital-efficient solutions help you maximize recovery from new fields to transform deepwater economics across the life of the asset.

Find out more at

onesubsea.slb.com/standardization 14

Š 2017 Schlumberger. All rights reserved. 17-OSS-282293

Connecting What’s Needed with What’s Next™

Visit us at Stand 24

WE TRANSFORM SUBSEA SOLUTIONS TO ENGINEER THE LOW CARBON FUTURE

Copyright © 2019 Oceaneering International, Inc. All rights reserved.

As your trusted partner, Oceaneering does things differently, creatively, and smarter by pushing boundaries to solve your subsea challenges.

The development of our next generation resident vehicles combines our unmatched experience, remote piloting and automated control technology, and Onshore Control Centers, to safely and cost-effectively improve efficiency and de-risk operations.

Connect with what’s next at oceaneering.com

15

SUBSEA MARKET INSIGHT DAY AT USF VERFTET - 11 JUNE

THE MARKET INSIGHT SEMINAR ON DAY 0 WAS INTRODUCED AT UTC 2016 AND HAS ALREADY BECOME AN IMPORTANT ARENA FOR MARKET INTELLIGENCE AND VIEWS ON THE OUTLOOK FOR THE SUBSEA INDUSTRY. Through presentations from leading companies in our industry, UTC 2019 will offer an opportunity to gain insight into the near, medium and long term perspectives of the subsea industry. The program for day 0, June 11, will be divided into two main themes: 1. Market Development and Industry Outlook 2. Entrepreneurship - Creating some real change The Seminar is a nice warm-up to the main conference in Grieghallen, Bergen and is hosted in collaboration with our valued partner DNB. The Market Insight Seminar will take place at USF Verftet, where the Icebreaker will be arranged in the evening.

MARKET INSIGHT SEMINAR PROGRAM COMITTEE IS LEAD BY THOMAS SUNDE Thomas has been with Subsea 7 since 1997. A Masters graduate in Marine Technology from the Norwegian University of Science and Technology in Trondheim, he began his career with Equinor before moving to Subsea 7. In Subsea 7, he has held various roles in both the engineering, project management and commercial functions, including Vice President Sales & Marketing for both APME and NSC regions. Thomas has been Vice President for Technology for Subsea 7 since 2015.

Valued partners

16

ICEBREAKER AT USF VERFTET - 11 JUNE

Join us for an informal networking event at Bergen's unique culture arena by the sea, USF Verftet. Meet fellow delegates, exhibitors and speakers, while enjoying tasty food and drinks at Bergen's largest terrace. The focus this evening is to network in relaxed surroundings before the conference proceedings start Wednesday morning.

The United Sardine Factory (USF) is located at the Georgernes Verft in Bergen. This old factory was once the largest cannery in Norway. Now, USF is a multiple cultural arena, unique in size and variety. This is the home for arts and culture productions in its various forms and genres.

FIND YOUR WAY TO USF VERFTET USF Verftet is located by the sea only a quick kilometer from the city center. It will only take about 15 minutes by foot, - that is, if you do not get stuck taking photos of the picturesque wooden houses and narrow streets on the way. You can of course take a taxi, but then you are likely to miss out the narrow charming streets.

Bergen Reiselivslaf / Oddleiv Apneseth - visitBergen.com Š

DRESS CODE: Smart casual VENUE: Georgernes Verft 12 WHEN: 11 June, 19:30 – 22:00 Please pick up your accreditation at the help desk, you need this to access the icebreaker.

17

PROGRAM SUBSEA MARKET INSIGHT @USF VERFTET

11 JUNE

14:15 - 14:45

Registration, badge pick-up and coffee

14:45 - 15:00

Welcome

by Subsea Market Insight Chairman Thomas Sunde, SUBSEA 7 and UTC Moderators Wendy Lam, BHGE and Kristin N. Berg, DNV GL

15:00 - 16:30

MARKET DEVELOPMENT AND INDUSTRY OUTLOOK Oil and gas market outlook Helge Andre Martinsen, Senior Oilmarket Analyst, DNB Energy Transition & Industry Outlook Arve Johan Kalleklev, Regional manager Oil & Gas, DNV GL The transformation of the industry – Short, medium and long-term global energy scenarios Erik Simonsen, Consulting Associate Director, IHS MARKIT

16:30 - 18:00

ENTREPRENEURSHIP - CREATING SOME REAL CHANGE Creating a culture of innovation Stephen Sheal – External Relationship Director, OIL & GAS TECHNOLOGY CENTRE Creating entrepreneurial opportunities – linking Norway to Brazil Michelle Duarte, Senior Project Manager, INNOVATION NORWAY SOUTH AFRICA Subsea Industry Evolution – the need to change the game Per Arne Nilsen, Head of Subsea Technology, TOTAL E&P

18:00 - 19:00

PANEL DEBATE Moderators: Wendy Lam, BHGE

Kristin N. Berg, DNV GL Panelists:

Stephen Sheal, Oil and Gas Technology Centre Michelle Duarte, INNOVATION NORWAY SOUTH AFRICA Per Arne Nilsen, TOTAL E&P Erik Oppedal, NEPTUN ENERGY

19:30 - 22:00

18

ICEBREAKER

CONFERENCE DINNER - 12 JUNE

CONFERENCE DINNER - 12 JUNE

<--FERDIDIG -->

As the perfect ending to the first day of the conference, the UTC conference dinner will take place in Dovregubben, Grieghallen in the evening of Day 1, 12 June. There will be live entertainment, speeches and the announcement of the prestigious UTC Award and UTC Subsea Upcoming Company Of The Year Award. The dinner is set in the heart of Dovregubben, surrounded by the exhibition. This offers a unique setting for all our guests to mingle and socialize.

The evening will provide an excellent setting for discussions and networking for both delegates and speakers.

DRESS CODE: Business VENUE: Dovregubben, Grieghallen WHEN: 12 June, 19:30 â&#x20AC;&#x201C; 00:00 REMEMBER TO DOWNLOAD THE UTC APP BEFORE ATTENDING THE CONFERENCE DINNER.

UTC UTCAPP APP Here youyou cancan findfind a list of allofthe Here a list all the attandees at UTC 2018 attendees at UTC 2019

Attendee List

Attendee List

Download the UTC application at www.utc.no

19

PROGRAM DAY 1 12 JUNE 08:30 – 09:30

Badge pick-up and coffee

09:30 – 09:40

Welcome by UTC Program Committee Chairman Jon Arve Sværen, ONESUBSEA and UTC Conference Moderators Wendy Lam, BHGE and Kristin N. Berg, DNV GL

09:40 – 10:00

Opening speech by Anders Opedal, Executive Vice President TPD, EQUINOR

10:00 – 10:20 10:20 – 11:00

BP Energy Outlook 2019 edition

William Zimmern, Head of Global Macroeconomics, BP Coffee break and exhibition PARALLEL SESSION #1 Track 1 @Peer Gynt

PARALLEL SESSION #1 Track 2 @Klokkeklang

PARALLEL SESSION #1 Track 3 @Troldtog

11:00 - 11:30

Adapting to the new world: what’s next for the subsea market?

Mhairidh Evans, WOOD MACKENZIE

North Sea Field Redevelopment - Using new subsea separation technology to de-bottleneck existing infrastructure and secure increased oil recovery. (OpCo Study) Asle Jostein Hovda, SEABED SEPARATION

Subsea power distribution Transforming field developments Knut Rongve, ABB

11:30 – 12:00

Stones - the world’s first 15 ksi ultradeepwater subsea pump Arill Småland Hagland, ONESUBSEA

Vigdis Booster station – next generation booster project – why and how Ole Oekland, EQUINOR

Full scale testing of a game changing ultra-long step out power solution Jan Olav Fløisand, ONESUBSEA Andrea Sætre, SHELL

12:00 – 12:30

Remotely Operated Factory (ROF™) – the Roadmap to Always safe, High value and Low carbon Cecilie Gotaas Johnsen, EQUINOR

Fast track EPCIC contract model to maximize economic recovery utilizing mature subsea processing system Jostein Tvedt, ONESUBSEA

Hybrid Multiphase Modelling – Predictive and Digitalized before first steel is cut Henrik Alfredsson, AKER SOLUTIONS

12:30 – 14:00

Lunch and exhibition

14:00 – 14:20

Engineering the future: The role of engineers in transforming our industry Graham Henley, Vice President Engineering, SHELL

14:20 – 14:40

Ocean Industries Erna Solberg, Prime Minister of Norway Panel Debate - Subsea technology's role in the future sustainable energy picture

14:40 – 16:00

16:00 – 16:30

Moderators: Wendy Lam, BHGE Russel McCulley, UPSTREAM Panelists: Egil Bøyum, AKER SOLUTIONS William Zimmern, BP Anders Opedal, EQUINOR Graham Henley, SHELL

Coffee break and exhibition PARALLEL SESSION #2 Track 1 @Peer Gynt

PARALLEL SESSION #2 Track 2 @Klokkeklang

PARALLEL SESSION #2 Track 3 @Troldtog

16:30 - 17:00

A 3D-printed subsea tool used for Egina development (Nigeria) Hugues Greder, TOTAL

Field experience from the world's first subsea process cooler for wet gas compression Kristine Solberg, ONESUBSEA

Test site in Trondheimsfjorden for Underwater Intervention Drone (UID™) - subsea docking station Pål Atle Solheimsnes, EQUINOR

17:00 - 17:30

Large modifiable underwater mothership MUM – Operational and technical concepts for complex unmanned tasks Willem Hendrik Wehner, THYSSENKRUPP MARINE

GRAND - the next big tie-back Hilde Reme, EQUINOR

A new generation of self-contained subsea valve actuators combining reliable fail-safe springs with interchangeable electric drives Alexandre Orth, BOSCH REXROTH

17:30 - 18:00

Innovative Local Heating Technology Provides Design Optimization and Operation Flexibility to Long Subsea Tie-backs Stephane Anrès, SAIPEM

Subsea sea water treatment and injection – A cost efficient and flexible solution to increase recovery Eirik Dirdal, NOV

Ensuring safety and reliability of allelectric systems Aslaug Melbø, BHGE

19:30 - 00:00

Conference Dinner @Dovregubben

20

PROGRAM DAY 2 13 JUNE 08:00 – 09:00

Morning coffee in exhibition hall

08:30 – 08:50

Student presentation -Track 1 @Peer Gynt Experimental and Simulation Qualification of an Electro-Hydrostatic Subsea Valve Actuator João Pedro Duarte da Silva, Amadeu Placido Neto, FEDERAL UNIVERSITY OF SANTA CATARINA (UFSC), Florianópolis, Brazil

08:50 – 09:10

Student presentation -Track 1 @Peer Gynt Redesigning Subsea Production System (SPS) for Efficient Utilization of Autonomous Underwater Vehicles (AUVs) Natalie Melchior, Maria Sognnes , Hannah Clark and Derrick Hansen, WESTERN NORWAY UNIVERSITY OF APPLIED SCIENCES, Bergen, Norway

08:50 – 09:30

Student presentation -Track 1 @Peer Gynt Analysis of Sand Erosion on Subsea Chokes Lise Margrethe Rinde, UNIVERSITY OF BERGEN, Norway PARALLEL SESSION #3 Track 1 @Peer Gynt

PARALLEL SESSION #3 Track 2 @Klokkeklang

PARALLEL SESSION #3 Track 3 @Troldtog

09:30 - 10:00

World’s largest bundle system for the Snorre Expansion Project Erik Klein, SUBSEA7

Nova – Maximizing value by utilizing existing infrastructureBård Owe Bakken, WINTERSHALL DEA

Subsea compression enabling offshore CO2 EOR Zabia Elamin, AKER SOLUTIONS

10:00 - 10:30

Hydrates plug removal in ultradeepwater; Kaombo field real case application Guillaume Delaëter, TOTAL

Establishing new Recommended Practice for Subsea Pumping System Sofia Wilhelmsson, DNV GL

Stand-alone Power Supply for Resident Underwater Inspection Drones using Wave Energy Converters Even Hjetland, FRED OLSEN

10:30 - 11:00

Case histories demonstrating Splash Zone Tools & Techniques Tim Eley, OCEAN TECH

A vision of an integrated low carbon subsea future Neil Robertson, CRONDALL ENERGY, Co-author: Graeme Rogerson, THE OIL & GAS TECHNOLOGY CENTRE

Dynamic and Static Submarine Cable Systems for Hywind Scotland World’s first Floating Offshore Wind Farm Maxime Toulotte, NEXANS

11:00 - 11:30

Results from NOV Subsea Storage Parameter Assessment Testing Julie Lund, NOV

Integrated Front-End Work; Models, Benefits, and Challenges Sigurd Hernæs, TECHNIPFMC

Low-carbon emission field developments Torkild R. Reinertsen, REINERTSEN NEW ENERGY

11:30 – 13:00

Lunch and exhibition PARALLEL SESSION #4 Track 1 @Peer Gynt

PARALLEL SESSION #4 Track 2 @Klokkeklang

PARALLEL SESSION #4 Track 3 @Troldtog

13:00 - 13:30

Subsea Data Transparency: Bridging the Operations team / OEM gap with data sharing John Murray, AKER SOLUTIONS

Easily accessible live sensor data as a tool for monitoring and maintenance services subsea Arve Værnes, COGNITE

Case Study on Opex Savings Using All-Electric Technology Ana Serrentino, ONESUBSEA

13:30 - 14:00

Does big data mean better data?

Nivedita Kumar, OCEANEERING

Safety 4.0 - Demonstrating safety of novel subsea technologies Tore Myhrvold, DNV GL

WIN WIN – oil & gas joining forces with offshore wind Marte Aaberg Midtsun, DNV GL

14:00 - 14:10

Transition to plenary Plenary session - CROSSOVER TECHNOLOGIES

14:10 - 15:50

15:50 - 16:00

Moderators: Wendy Lam, BHGE Russel McCulley, UPSTREAM Presenting different fields of technology Astrid Onsum, AKER SO Andreas Løvli, TECHNIPFMC Michael Bloomfield, OCEANEERING Egil Tjåland, NTNU

Summary closing

21

WE ARE PROUD TO WELCOME STUDENTS AND YOUNG JOB-SEEKERS TO YOUNG@UTC YOUNG is an arena were students can connect with the industry and get an opportunity to expand their network. The YOUNG program is open to all students and job-seekers, and offers exciting presentations parallel to the main conference. All of our YOUNG participants will have a tour of the exhibition, meeting many of the key companies in the subsea industry.

YOUNG@UTC PROGRAM 09:00 – 09:20

Welcome - introduction to YOUNG

09:20 - 09:40

Inger Elvevoll AKER SOLUTIONS About her job and motivation to work in the industry

09:40 - 10:20

Tour of exhibition

10:20 - 11:00

Networking at the Young Hub

11:00 - 11:30

Finn Gunnar Nielsen UiB Offshore wind and crossover technologies

11:30 - 12:00

Sofia Wilhelmsson DNV GL DNV GL Energy Transition Outlook 2018 – 2050

12:00 - 12:30

Pål Atle Solheimsnes EQUINOR Underwater Drones

12:30 - 14:00

Lunch and exhibition

13:30 - 14:00

Poster session last part of lunch

14:00 - 16:00

YOUNG attends main conference plenary session

16:00 - 16:30

Poster session and networking

16:30 - 18:00

Networking at the YOUNG HUB and access to the exhibition

22

12 JUNE

DAY 1 - PARALLEL SESSION #1 Track 1 @Peer Gynt

12 JUNE Parallel Session #1

June 12th, 11:00-11:30, Track 1 @Peer Gynt

Adapting to the new world: what’s next for the subsea market?

Mhairidh Evans, WOOD MACKENZIE Through a challenging few years, the subsea industry has adapted and evolved. This paper will set out Wood Mackenzie’s insights on the current and future conditions for the subsea market. In the presentation, we will start with a short bit of context on some of the key talking points of the past couple of years (low activity, smaller contract sizes). Then we will focus very much on the future. We will discuss Wood Mackenzie’s view on the direction, pace and profile of future growth in the subsea market; which regions and types of projects are standing out, and why?; how have breakeven economics changed over the past few years and what’s the outlook?

We will pose (and answer) the question ‘are mega-projects gone for good?’. And present on the changing motivations of operators when taking project FIDs (and what that means for the subsea market). There are some interesting new ways of working that the subsea industry is advancing – integrated solutions, standardisation and digitalisation. This paper will discuss our view of the opportunities and challenges for these innovations, and the potential impact of them on project economics.

June 12th, 11:30-12:00, Track 1 @Peer Gynt

Stones - the world’s first 15 ksi ultra-deepwater subsea pump Arill Småland Hagland, ONESUBSEA Stones is a phased development that began production in September 2016 from two flowing subsea wells tied back to an FPSO. Full-field development includes six more wells from two connected drill centers, and a subsea boosting system to increase production and extend the life of the field. This paper will describe the technology qualification program and execution experience from developing and delivering the world’s first 15 ksi ultra deepwater subsea pump, as well as lessons learnt from the project, through component qualification, engineering, manufacturing, testing and installation. In addition, experience from commissioning and start-up of the boosting system will also be described.

Multiple technology gaps were identified to meet the HPHT design parameters for Stones. To close these gaps an extensive Technology Qualification Program (TQP) was executed together with OneSubsea Processing. This was the start of a cooperation between Shell and OneSubsea with a common goal; to deploy the world’s first 15 ksi ultra-deepwater boosting system.

Following the TQP, an EPC contract was awarded in 2015 that included a pump station with two off 2.9 MW pumps and topside power drive system. The pump system has been through an extensive execution and test phase that has been completed without any injuries. The complete system has now been handed over to the operator and has partially been installed as part of the world’s deepest oil and gas project. The Stones boosting system will enable the operator to maintain and extend production in addition to significantly increase the recovery at the field.

June 12th, 12:00-12:30, Track 1 @Peer Gynt

Remotely Operated Factory (ROF™) – the Roadmap to Always safe, High value and Low carbon Cecilie Gotaas Johnsen, EQUINOR Remote and unmanned operations including subsea tie-backs have been in the industry and Equinor’s portfolio for decades, i.e. Tordis boosting, Åsgard – and Gullfaks subsea compression and normally not manned platforms as Huldra and Valemon. From this knowledge and operational experience, combined with innovation and digitalization, Equinor’s Remotely Operated Factory (ROF™) has emerged and matured into several possible remotely operated and unmanned field development concepts.

Unmanned Wellhead Platform (UWP™) has successfully been implemented and started at Oseberg H. From this lean design philosophy, UWP™ has further materialized to Unmanned Production Platform (UPP™) and Unmanned utility platform (UxP™), successfully targeting the corner stone of our business; Always Safe, High Value and Low Carbon. Field development solutions based on the UPP™ concept in combination with subsea technologies is assessed for several business cases. Beyond always safe which is designed into the unmanned and remotely operated facilities, stranded discoveries, marginal fields and new exploration plays can materialize using UPP™ with reduced capex and opex compared to standard PDQ greenfield solutions.

Additionally, these concepts cater for further reduction in carbon intensity from our operations, enabled by simplified design solutions. A range of solutions are shown in a ROF™ roadmap increasing the business opportunities and competitiveness for the future.

Track 2 @Klokkeklang

Parallel Session #1

June 12th, 11:00-11:30, Track 2 @Klokkeklang

North Sea Field Redevelopment - Using new subsea separation technology to de-bottleneck existing infrastructure and secure increased oil recovery. (OpCo Study) Asle Jostein Hovda, SEABED SEPARATION In one of the central NCS fields the main FPSO and infrastructure is suffering severe issues from excess produced water. This is a common problem to most mature area development on the NCS/UKCS. This excess water is hampering the overall profitability by filling up the FPSO processing system and taking up a large part of the capacity in the pipeline infrastructure. The result is loss of new revenue opportunities from failure to onboard new fields, increasing operating expenditures, and in general non-optimum production philosophy for the area development.

With new and more efficient subsea processing technology such as the Dual Pipe Separator system (DPS), operators can remove the produced water at the seafloor before releasing it to sea or injecting in a reservoir, and thus enable new business development opportunities. Removing the water at the seafloor, the operators will gain from increased oil recovery due to a reduced back pressure on the reservoir and accelerated production from existing and new reservoirs.

The DPS technology is based on using a pipe separator principle with a set of inclined pipes in parallel, making the solution scalable to both capacity, reservoir pressure and water depths. Since the DPS consists of a number of inclined pipes in parallel, the number of pipes can be adjusted to the capacity requirement. We will present a case study from a real NCS field where the DPS system will be integrated with already existing infrastructure to achieve significant IOR and open up the pipeline for new developments.

23

June 12th, 11:30-12:00, Track 2 @Klokkeklang

Vigdis Booster station – next generation booster project – why and how Ole Oekland, EQUINOR Vigdis Booster station project was sanctioned in November 2018. It is the first project in Equinor’ s project portfolio which has implemented the standardization principles for subsea booster stations. Equinor has since 2015 been defining and developing a standardized subsea multiphase boosting pump station with specified interfaces. The station will comprise of a foundation structure with trawl protection, a manifold module for connection to flow lines, a boosting pump module and an umbilical termination assembly. Key principles are a standardized manifold design with 2 off horizontal connections to the flow lines and 2 off vertical hubs (vertical bore) for connection of the pump module. The solution has been designed and engineered as a collaboration with SubseaDesign.

Production on the Vigdis Field is currently limited by the capacity in the production lines and pressure drop across the topside chokes. Reservoir deliverability is limited by low reservoir pressure in some parts of the field, together with increasing water cut, leading to reduced energy into the system i.e. dropping wellhead pressures. OneSubsea will deliver both the pump system, including all-electric control, and the pump station. VBS will apply a 8.7 KV HV motor and thereby eliminate the need for subsea transformer and reducing investment cost benchmarked to similar subsea projects. The subsea pump interphase document described in the presentation is released as an open document allowing all companies, both operators and suppliers, to implement the proposals in their future field development where subsea booster pumps are part of the concept.

June 13th, 12:00-12:30, Track 2 @Klokkeklang Fast track EPCIC contract model to maximize economic recovery utilizing mature subsea processing system Jostein Tvedt, ONESUBSEA In 2016 TAQA identified that continued production from the Eider platform was becoming uneconomic and instituted a wide-ranging review of options for the Eider field and its subsea tieback Otter. It was determined that the maximum economic recovery (MER) would be achieved from bypassing production from the Otter field around Eider and flowing directly to North Cormorant, with the Eider platform undergoing cessation of production (CoP) and reverting to a utility platform for power and control for Otter. As part of this process and in May 2017 a contract was entered for the engineering, procurement, construction, installation and commissioning (EPCIC) of a subsea multiphase boosting system for the Otter Field.

The Otter field is located at Block 210/15a, East of Shetland, and commenced production in 2002. The need to maximise recovery in subsea fields has driven the advancement of subsea processing technologies. This project has been executed, delivered, installed, commissioned and started up in just 16 months.

This paper will focus on the key challenges in ensuring successful integrated project execution and highlight the success factors critical to delivering a long subsea tieback boosting project. Lessons learned for a fast track EPCIC long tie-back boosting project execution model will be provided, together with challenges and lessons learned re-using existing hardware in order to minimize capital expenditure. Early operational experience will be provided, as well as key features in terms of production assurance and drawdown capabilities. The fundamental benefits of subsea boosting by enabling stable well backpressures will be provided.

Track 3 @Troldtog

Parallel Session #1

June 12th, 11:00-11:30, Track 3 @Troldtog

Subsea power distribution - Transforming field developments Knut Rongve, ABB ABB has since 2013 been running a 100MUSD Joint Industry project together with Equinor, Chevron and Total to develop technologies for subsea power transmission, distribution and conversion at greater distances, in deeper waters, and in harsher environments. The target environment is water depths up to 3000 meters, transmission distances up to 600 km, and power levels up to 100 MW. The first Subsea VSD was successfully tested in November 2018.

This was an important milestone in the project. The subsea VSD operated for 1000 hours and demonstrated successful and reliable operation of the drive during different load conditions.

In the final test campaign, the complete subsea power system will be tested together in a second shallow water in the summer of 2019. This will mark the end of this ground-breaking qualification project involving over 150 technical experts from 6 different European countries from ABB and our partners.

After completion of final testing the products and systems will be available for commercial use, transforming future development of oil and gas fields. This presentation will give an insight into the latest progress and achievements. Further we will present the products and system aspects related to use of this technology and the benefits this could have on future field developments.

June 12th, 11:30-12:00, Track 3 @Troldtog Full scale testing of a game changing ultra-long step out power solution Jan Olav Fløisand, ONESUBSEA Andrea Sætre, SHELL

As part of the concept select phase, Shell has together with OneSubsea performed detailed power system analyses and executed several tests to validate the concept of providing power from shore on the Ormen Lange subsea compression development. The concept leverages pre-qualified and standard components in a proven power topology. Taking advantage of the testing facilities at Horsøy, a VSD has been operating various loads through a high voltage 120 km step out test arrangement replicating actual cable properties. The testing has included start up, stops, trips, speed and load changes, and operation across the complete frequency range. Both the analyses and testing prove that the concept of operating a load via a 120 km cable is fully feasible and can be evaluated as part of the concept select phase.

Increased recovery by applying subsea boosting in terms of boosting is a field proven solution. As the subsea field developments are evolving and becoming more extensive, the significance of the system realization bottleneck in terms of stepout length feasibility, is continuously increasing. A general perception has been that new offshore platforms or alternatively the use of the non-field proven subsea VSD’s is required for large and long stepouts for subsea boosting. However, based on this step change, power demanding greenfield and brownfield applications can be transformed to low-risk economically viable projects by extending the reach of the field proven power system topologies. This presentation shares insight to the evaluation and confidence steps taken, from concept idea and analysis, to system verification.

June 13th, 12:00-12:30, Track 3 @Troldtog Hybrid Multiphase Modelling - Predictive and Digitalized before first steel is cut

Henrik Alfredsson, AKER SOLUTIONS Subsea Compression offers a low carbon footprint compared to topside offshore gas installations. Now and into the future we will use energy from an array of sources where gas will continue to play an important part. Producing this with the best available technology in the cleanest possible way should be our priority. Following the success of the Åsgard Subsea Compression Project Aker Solutions are going deeper, further and more compact creating the second

24

generation Subsea Compression Systems. The drive to predict, understand and digitalize already in project phase intensifies as flow rates and pressures increase and installed size decreases. This paper will present how novel digital tools are used to predict complex multiphase / multi physics events crucial to the functionality of the Subsea Compression System. Next generation Hybrid Multiphase Models have been used in cooperation between Aker Solutions and Siemens to predict multiphase liquid distribution and gas/liquid separator performance. The outcome is compared to real environment, high pressure, low surface tension measurements. This forms a validation benchmark showing how what was previously deemed “simulation wise impossible” now has evolved into a trustworthy engineering tool. In the Subsea Compression framework this enables perceived risk to be challenged and cost to be reduced way ahead of the test and integration phase. This drives down size and increases the safe operability envelope of the Subsea Compression System effectively getting more gas out on the market.

DAY 1 - PARALLEL SESSION #2 Track 1 @Peer Gynt

12 JUNE Parallel Session #2

June 12th, 16:30-17:00, Track 1 @Peer Gynt

A 3D-printed subsea tool used for Egina development (Nigeria) Hugues Greder, TOTAL The 330 meter long Egina FPSO started to produce offshore Nigeria last December 2018. During the Egina development phase, Total successfully used Additive Manufacturing (3D-printing) to provide a subsea tool within seven days and avoid a shut-down of the nearby producing Akpo FPSO. The Egina Gas Export Line was to be tied back to the existing Akpo Gas Export line when it was found out that the connection pressure cap located on the subsea connection module was blocked and could not be removed. This was due to a blockage by gas hydrates. It was decided to remove all the nuts from the plunger flange, remove the flange and introduce a “methanol soaking tool” to get rid of the hydrates. The external shape of the tool was designed locally and then digitally sent to TOTAL 3D-printing center. The tool design was reviewed to optimize the shape of the methanol channels within the tool. A so-called “topological optimization” was performed to reduce the weight of the tool. A stress and strain analysis was conducted to make sure the tool would sustain deep-water injection conditions. The tool was then printed using a powder bed laser sintering technology. The retained material was polyamide-12.

The 32cmx32cm tool was printed in 37 hours and weigths 11kg (ca. half of a machined tool). The tool was sent within 48hours to Port Harcourt and run subsea in 1250m water depth. After 2 hours of continuous soaking, the pressure connecting cap was successfully freed from hydrates.

June 12th, 17:00-17:30, Track 1 @Peer Gynt

Large modifiable underwater mothership MUM – Operational and technical concepts for complex unmanned tasks Willem Hendrik Wehner, THYSSENKRUPP MARINE Aim of the “MUM– Large Modifiable Underwater Mothership” Project is to explore near-future technology unlocking the potential of large UUVs within the next decade. We present a highly modular and variable unmanned underwater vehicle family, providing novel operational and technical concepts for efficient and economic subsea tasks and works under harsh conditions. The new vehicle class brings unconventional ideas to the table towards solving the needs of the offshore oil and gas industry regarding cost efficiency and reduced manning: The design of modular building block systems allows a focused mission-dependent module assembly. A scalable fuel cell based energy system, based on proven submarine technology will power the MUM throughout even long-term deployments. New developments in autonomy, navigation, and communication enable autonomous missions which usually require permanent operator control. With payloads or toolboxes up to ten tons, the MUM system will largely extend the possible tasks for UUVs. This concept design is going to be validated through model tests of vehicle variants in summer 2019 and real scale tests of critical components. Underlying operational concepts, mission module designs as well as vehicle configurations for the tasks were validated by industry experts e.g. from Equinor and PGS. Exemplarily, we present two relevant missions; i.e. the exchange of subsea control modules (SCM) by the vehicle and the deployment and retrieval of ocean bottom seismic nodes.

June 12th, 17:30-18:00, Track 1 @Peer Gynt

Innovative Local Heating Technology Provides Design Optimization and Operation Flexibility to Long Subsea Tie-backs Stephane Andrès, SAIPEM Several heating solutions are already field proven, they are based on distributed heating technologies like DEH and Heat tracing and are mainly considered for hydrate management under transient operations such as start-up, shutdown and preservation. Local heating is a different solution, intended to be used continuously during production. Heating the flowlines during production is a way to overcome thermal constraints, mitigate hydrate and wax risks, provide operating flexibility and optimize Capex. Indeed in the case of long distance tie-backs, very deepwater applications or when the fluid temperature at the wellhead is too low, conventional flow assurance solutions might be very expensive or even not applicable.

A local heating device can be integrated into a subsea station, installed inline or in parallel of the main flowline and which can be retrieved for maintenance or be relocated. The technology is compact thanks to the use of induction which allows for the transfer of a high power (several MW) over a relatively short pipe length. The technology can be implemented either on new fields or on the extension of existing lines, is fully compatible with preservation by flushing and allows for pigging in case of deposits. This paper will present an overview of the local heating technology including a preliminary design and will then provide information on the small-scale prototype tests (100 kW heating) that have been performed and have confirmed heating levels and heating efficiency.

Track 2 @Klokkeklang

Parallel Session #2

June 12th, 16:30-17:00, Track 2 @Klokkeklang

Field experience from the world's first subsea process cooler for wet gas compression Kristine Solberg, ONESUBSEA Equinor and OneSubsea Processing have cooperated in developing and qualifying the world’s first subsea wet gas compression system which was installed at the Gullfaks field in the North Sea in late 2015. The system has been in continuous operation since July 2017. Early in the compressor technical qualification program it became obvious that subsea cooling was mandatory for the success of a subsea wet gas compression system. Development of a wet gas process cooler was essential and required focus on several aspects such as cooler performance, fluid distribution, pressure loss, sand accumulation, hydrate formation, and marine growth. Reliability, robustness, size and weight were of high priority, as marine interventions are costly, especially for large equipment. Three years after installation, and 1.5 years in operation have provided extensive operational experience for the process coolers in the Gullfaks subsea wet gas compression system. It is of high interest to evaluate and compare operational experience from field with test data and calculations. The purpose of this paper is to summarize the experience gained from field with respect to cooler performance and flow assurance issues and compare with initial calculations and assumptions.

25

June 12th, 17:00-17:30, Track 2 @Klokkeklang

GRAND - the next big tie-back Hilde Reme, EQUINOR The GRAND development unlocks significant volumes, utilizes and extends the capacities of the Grane platform and revitalizes the area. This presentation will review the concept maturation and selection process – Unmanned Wellhead Platforms versus 4-slot templates versus 6-slot templates – and how the reservoir characteristics and well requirements influenced on the decision. The characteristics of the selected subsea solution will be described – how standard building blocks are utilized – how a new standard building block is added to the standard catalogue – and how the selected solutions will accommodate the requirements of the characteristic reservoirs and objectives of the project. The planned development will have capacity for up to 24 wells.

Co-authors: Helge Rivelsrud and Erik Brandt

June 12th, 17:30-18:00, Track 2 @Klokkeklang

Subsea sea water treatment and injection – A cost efficient and flexible solution to increase recovery Eirik Dirdal, NOV With the downturn fresh in mind, oil and gas operators are challenging the market to come up with innovative low-cost solutions to increase recovery and improve their margins. This is particularly important in mature areas like the North Sea. Water injection is a common way of increasing recovery from reservoirs. Moving water injection subsea provides a cost-efficient solution and ensures safe operation, making field development economically viable.

Utilizing the seabed to treat and energize surrounding seawater provides the long sought-after flexibility for both Brown- and Greenfields. Two oil service majors have joined forces and developed a complete water treatment and injection package solution based on Seabox™ and LiquidBooster™ technologies.

With significantly reduced topside scope and utilizing standardized products, it is a cost-efficient solution to provide high-quality water to subsea wells for reservoir pressure support. One important aspect of the solution is that the sea water treatment and injection process is moved subsea, reducing the need for topside modification, which makes it easier to control cost, reduce the overall uncertainties and provide significant value creation to a field development. The water injection strategy can be decoupled from the host and provides a flexible approach to phase in water injection capacity when and where required, based on reservoir dynamics and/or synergies between a cluster of nearby fields.

This presentation will give an introduction to a subsea sea water injection application, the associated benefits by moving this technology subsea and the advantageous synergies of a joint integration approach.

Track 3 @Troldtog

Parallel Session #2

June 12th, 16:30-17:00, Track 3 @Troldtog

Test site in Trondheimsfjorden for Underwater Intervention Drone (UID™) - subsea docking station Pål Atle Solheimsnes, EQUINOR Test site in Trondheimsfjorden for Underwater Intervention Drone (UID™) – subsea docking station. NTNU and Equinor are collaborating regarding developing and installation of a UID docking station test-site. During the spring 2018 NTNU and Equinor have installed the world's first pilot of UID docking station in Trondheimsfjorden at 365 meters depth, northwest of Munkholmen. The docking station is powered and controlled from Trondhjem Biological Station (NTNU) about 2,2 km from site. The users of the docking station will be Academia (NTNU), UID suppliers, Operators and others. The aim for the pilot is to have possibility of testing and verification of new technology within UID technology and will be offered to the marked with a nonprofit rental cost to customers. From NTNU and Equinor view it is important to have this type of low threshold test site available to increase the speed of the UID technology research and development. The test site has an inductive power and communication system from Blue Logic, Wisub and Siemens.

The paper will present a technical description of the test site in Trondheimsfjorden and an experience transfer of the first users of the docking station. The first user will start operation during spring 2018 (Eelume). Presented by Asgeir Sørensen (NTNU), Martin Ludvigsen (NTNU) Jan Christian Torvestad (Equinor) and Pål Atle Solheimsnes (Equinor).

June 12th, 17:00-17:30, Track 3 @Troldtog Full scale testing of a game changing ultra-long step out power solution

Alexandre Orth, BOSCH REXROTH 1. Objective All electric subsea actuators have been developed to provide solutions for the limitations of the traditional hydraulic actuators, such as demand for top side hydraulic power unit, need for hydraulic flow lines in umbilical’s. However, when it comes to the high actuation forces like 5’’ or 7’’ gate valves, the all electric solutions demand a large dimension and weight. However, the power density (force per size) is one of the advantages of hydraulic actuators.

2. Method Is it possible to create a hybrid solution which combines the advantages of both existing technologies, i.e. to get the best out of electrics and hydraulics?

This work presents a novel approach for actuation of subsea valves which combines the strengths of an electromechanical actuator with a hydrostatic transmission. The paper will provide a prototype of a hybrid actuator for subsea production based on successful industrial solutions.

3. Results The main achievements are: 1. Cost-effective modular design (lean production management), 2. Environmental-friendly set up (no leakage of hydraulic fluid), 3. High power savings (up to a reduction of 75%), 4. High safety level (up to SIL 3), 5. High availability and condition monitoring, 6. Integration of a mechanical override, 7. Interchangeable electric drives (optional driven by ROV torque tools).

The results are demonstrated by qualification test of a 2’’ gate valve for 3,000 m water depth. Hence, a 5’’ concept design shows the potential to build a complete actuator in the same space used today by a pure hydraulic cylinder.

4. Novel The designed Subsea Valve Actuator is more reliable as existing solutions without hydraulic umbilicals and emission of fluid into seawater, by offering a standard electric interface with integrated condition monitoring and safety. It is an important step to close the technological gap to accomplish the allsubsea factory, especially to replace existing hydraulic actuators.

June 12th, 17:30-18:00, Track 3 @Troldtog Ensuring safety and reliability of all-electric systems

Aslaug Melbø, BHGE Subsea electrification has been a recurring industry theme for more than 20 years, but adoption has been limited. Recently, there has been renewed interest in this concept, driven mainly by a reaction to cost pressures in the industry and an increased acceptance of enabling technologies for subsea electrification including electric actuation. One reason for the limited adoption has been that only standalone parts of the system have been qualified,

26

meaning that not all benefits of a fully electric system can be reached. Another reason is conservatism in the industry and concern that an all-electric system will not have the same safety and reliability as a conventional electro-hydraulic system.

BHGE will present our systems approach to the all-electric development, ensuring all aspects are covered. Safety and reliability are key focus areas in the development. Important design decisions around the functional safety approach, fail-safe mechanisms and retrievability have been made early in the project to ensure the all-electric system maintains all aspects of safety and reliability that are expected from a conventional system. In addition, all-electric systems use more advanced monitoring and digital tools that further improve the reliability and integrity of the system.

DAY 2 - PARALLEL SESSION #3 Track 1 @Peer Gynt

13 JUNE Parallel Session #3

June 13th, 09:30-10:00, Track 1 @Peer Gynt

World's larges bundle system for the Snorre Expansion Project Erik Klein, SUBSEA7 The Snorre Expansion Project in the Tampen Area will connect up to 24 wells in 6 new subsea drill centers. Connections are made through 21km of the largest bundle systems ever built, maximal in length, setting a record for diameter as well as weight. The flowlines in the bundles require no trenching or rockdump protection. This was an important factor to bring the project development cost and the project CO2 emissions down. The bundle structures were designed to be tolerably mobile on very soft clays, a soil type typical for the Norwegian Trench. This removed the need for rock foundation. The compact footprint of the bundle lay out enables the use of an innovative spool cassette installation method, positioning all spools and controls for a drill centre in a single lift.

The bundles are installed using the controlled depth towing method. A significant advantage for the project because it did not compete for the availability of specialist pipelay vessels. The minimal installation time in the field allows flexibility for the extensive drilling campaign. The bundles house all field flowlines, service and control lines. The four flowlines are PIP, providing much better no-touch time than initially planned. The bundles control system is electrically actuated. WI lines are PE lined, using Linerbridge® technology, an industry first. And additional power and fibre optic cables are installed in the bundles to make them ready for the implementation of Underwater Intervention Drones in the Snorre field.

June 13th, 10:00-10:30, Track 1 @Peer Gynt

Hydrates plug removal in ultra-deepwater; Kaombo field real case application Guillaume Delaëter, TOTAL The FPSO Kaombo Norte came on stream on July 27 offshore Angola. When both its FPSOs will be at plateau, the biggest deep offshore project in Angola will account for 10% of the country’s production. Kaombo reserves are spread over an 800-square-kilometer area. The development stands out for its subsea network size with more than 270 kilometers of pipeline on the seabed between 1500-2000m water depth, including subsea production wells more than 25km away from the production facility.

During the installation campaign of the Gas Export Pipeline, tied to existing subsea assets with no shutdown, some difficulties to complete properly precommissioning operations were faced. A hydrates plug was confirmed in the connecting equipment to subsea assets under operations, leading to temporary impossibility to perform the dewatering of freshly installed end-line equipment. Subsea activities were deeply prepared thanks to a transverse approach between stakeholders to reach a safe and efficient hydrate removal operation in very limited timeframe. A subsea skid was eventually deployed to perform sequences of depressurization and injection of hydrates inhibitor batches. This subsea operation, which represents an additional in-situ experience for hydrate mitigation, has been successfully carried out providing great achievement to deliver all subsea pipeline installation in due time.

June 13th, 10:30-11:00, Track 1 @Peer Gynt

Case histories demonstrating Splash Zone Tools &Techniques Tim Eley, OCEAN TECH In the Splash Zone environment, typically +/- 20 meters above or below sea level, (IRM) inspection, repair & maintenance services, have traditionally relied on vessel based, ROV or Diver supported operations. While these types of operations are generally carried out quite successfully in the subsea sector, they have proved difficult, if not impossible in the splash zone, where the effect of strong wind and wave and tidal conditions make traditional subsea techniques generally impractical. The core business of Ocean Tech is to operate Splash Zone ready tools and techniques, many using standard ROV tools & tooling, deployed from stable work platforms in the splash zone, using T4 Schilling robotic ROV arms, as found on most work class ROV’s.

This presentation will demonstrate the types of operation currently being carried out in the splash zone, using a range of recent case histories from both North Sea and International Operator assets. The case histories will illustrate, not only standard cleaning and inspection techniques, but also state of the art inspection using “acfm” sensors for nodal weld crack detection on platform jackets. Much of this work is being transformed by the use robotic techniques to enhance the work of skilled ROV operators. In addition, we will also show how Ocean Tech installed “I” & “J” tubes in a remote offshore location, without the use of vessels, divers or ROV’s resulting in considerable savings for the Operator. No Vessels, No Divers, No ROV’s ……..No Problem!

June 13th, 11:00-11:30, Track 1 @Peer Gynt

Results from NOV Subsea Storage Parameter Assessment Testing Julie Lund, NOV The Subsea Storage System is designed to store hydrocarbons with or without dissolved gas subsea at ambient pressure. This paper presents benefits from an operators and suppliers point of view. This storage system is energy-efficient with a low environmental footprint and is developed based on experience from existing storage solutions in order to be a competitive alternative for future field developments requiring temporary storage.

Engineering and testing activities previously conducted have provided the feasibility of operating a subsea storage unit with a flexible membrane defining the horizontal interface between oil and sea-water. This paper will present new results from a downscaled subsea storage system model testing, conducted

by NOV together with Equinor, with focus on increasing the understanding of membrane behavior, oil ventilation system and governing parameters. The subsea storage system includes the innovative Cluster Unit design, consisting of multiple Subsea Storage Units (SSU), typically coupled as several hydraulic units for storage of hydrocarbons. During normal filling and offloading cycles, the Cluster Units will inherently operate in parallel without active flow control. The SSU is a gravity based, remote storage unit, that employs the concept of a flexible membrane protected by a protection structure.

Lower complexity, combined with cost-effective installation, introduces new opportunities for field developments. This solution is also designed with the option to operate below wax appearance temperature and can make even smaller field developments profitable in an energy-effective manner with a low environmental footprint.

27

Track 2 @Klokkeklang

Parallel Session #3

June 13th, 09:30-10:00, Track 2 @Klokkeklang

Nova – Maximizing value by utilizing existing infrastructure Sindre Solland, WINTERSHALL The 9.9 billion NOK Nova project is currently in the execution phase after the plan for development and operation was approved in September 2018.

This presentation will explain how the chosen development solution will lead to a sustainable field and how the team has achieved significant cost reduction. Nova will be developed as a subsea tie-back connecting two templates to Neptune Energy’s Gjøa platform for processing and export. Gjøa will also provide lift gas to the field and water injection for pressure support. Power for the Nova field comes via the Gjøa platform from shore. The team judged that utilizing the Gjøa facilities and other existing infrastructure would be the most sustainable and economically robust solution. It will save costs for Wintershall and the partnership, extend the economic life-time of the existing infrastructure and allow for future tie-ins for new discoveries in the area.

The presentation will also focus on how Wintershall worked closely with suppliers in the FEED phase to take significant costs out of the project. This is part of the project’s “One Team” approach to create value for the partners, host operator and suppliers. Through use of standard components, innovative contracting and encouraging close collaboration between FEED suppliers, the project estimate was reduced by almost 50% between choice of development solution and final investment decision.

June 13th, 10:00-10:30, Track 2 @Klokkeklang

Establishing new Recommended Practice for Subsea Pumping System Sofia Wilhelmsson, DNV GL DNV GL is together with the industry running a joint industry project (JIP) working towards cost efficient subsea processing, called the ‘Subsea Processing JIP’. The objective is to reduce cost in a lifetime perspective and make subsea processing more competitive through standardization and alignment of technical requirements, definitions, work processes and documentation. The JIP participating companies are Aker Solutions, BHGE, Equinor, OneSubsea, Petrobras, Shell, TechnipFMC and Woodside. The project will finish its Phase 2 in December 2018. The scope through the first and second phase has been to develop a Recommended Practice (RP) for Subsea Pumping Systems, which will be published during first half of 2019.

The RP for Subsea Pumping Systems collects and bridges industry standards in use for subsea pumping systems, from well-established documents for subsea production systems, pressure containing systems, material standards and requirements for control systems and electrical power systems, through to more recent developments like API RP 17X for Subsea Pump Module Systems and Subsea Electrical Power Standardization (SEPS). The RP points to which parts of the collection of industry documents that apply for subsea pumping systems and adds specific requirements where this is relevant. It defines design classes and requirements to technology qualification, for more targeted and re-usable qualification. The RP also offers a methodology for increased predictability in witnessing activities during manufacture and testing. Further, an informative part of the document contains educational material and useful know-how on subsea pumping.

June 13th, 10:30-11:00, Track 2 @Klokkeklang

A vision of an integrated low carbon subsea future Neil Robertson, CRONDALL ENERGY, Co-author: Graeme Rogerson, THE OIL & GAS TECHNOLOGY CENTRE Recent technology development across the spectrum of subsea systems offers a vision of an integrated low-carbon future. This vision of a low cost, reusable tieback of the future could incorporate technologies such as on-bottom retrievable pipelines with mechanical connections, low friction internal coatings to reduce the need for flow assurance chemicals and combined with a subsea HPU/chemical delivery and local communications buoy could minimise or eliminate the umbilical.

The presentation will identify the technologies available or being developed across the industry and identify their current readiness status (TRL). Technical and commercial barriers to realisation will be discussed and a possible roadmap to deployment will be outlined. The presentation will tie together recent technology studies by Crondall Energy and broader industry developments to show how low carbon subsea tieback solutions are emerging.

June 13th, 11:00-11:30, Track 2 @Klokkeklang

Integrated Front-End Work; Models, Benefits, and Challenges Sigurd Hernæs, TECHNIPFMC The subsea industry has for many years operated with a field development model where the work is split between the Subsea Production System(SPS) suppliers and the Subsea Umbilical, Riser and Flowline (SURF) (includes also installation) suppliers. The last years it has been a very strong focus on integrated studies and execution projects in the industry, as many believes this will have major benefits in both executing the necessary studies and the execution projects. This paper describes the findings of benefits and challenges for early phase study work from several recent studies with some different integration models, and the different models will be discussed. The studies were done in a company that have been merged from a Subsea Production System company and a Subsea Umbilical, Riser and Flowline company. However, as these two disciplines does not cover a complete subsea field development, the impact of the interfaces not being covered by the SPS and SURF integration is also to some degree discussed. Furthermore, the transfer to, and impact on the execution project is touched on in the paper.

The paper concludes that integrated study models has several benefits, such as less time used to communicate between the parties, and that better concepts is likely as the interface issues can be solved and challenged over the table. However, there are challenges, such as the concepts may become proprietary, and the interfaces not covered by the integration model.

Track 3 @Troldtog

Parallel Session #3

June 13th, 09:30-10:00, Track 3 @Troldtog

Subsea compression enabling offshore CO2 EOR Zabia Elamin, AKER SOLUTIONS Key learning outcome: Developments within subsea compression as an enabler for offshore CO2 EOR. The unique properties of CO2 can be used to enhance oil production as a value-creating supplement to permanent CO2 storage. The CO2 will mix with the oil and make the oil flow more easily, thereby increasing the production of oil. CO2 will be produced with the oil and must be separated and reinjected into the reservoir. Existing offshore platforms will normally not be able to handle the increased CO2 production without significant modifications requiring long shutdowns. Aker Solutions, in cooperation with Equinor and MAN Energy Solutions and partly financed by the CLIMIT program, have evaluated the proven Åsgard Subsea Compression technology for service with a CO2 rich gas mixture. This application may become an enabling solution for offshore CO2 Enhanced Oil Recovery (EOR).

The solution is a simplified subsea system for pre-treatment of the well stream to minimize the CO2 produced to an offshore platform. Oil and gas is sepa-

28

rated subsea and the whole gas phase is reinjected (CO2 and hydrocarbons) to minimize the amount of CO2 produced to the existing facility. SUBCOMP has included reservoir simulations, evaluation of required operating conditions to reduce the topside CO2 exposure and impact on export gas quality, evaluation of compressor functionality with large variations in gas composition and flow rates, design of the subsea processing plant, and material evaluations. Co-author: Dr. Dirk Büche, MAN Energy Solutions Schweiz AG

June 13th, 10:00-10:30, Track 3 @Troldtog Stand-alone Power Supply for Resident Underwater Inspection Drones using Wave Energy Converters Even Hjetland, FRED OLSEN

Fred. Olsen in Oslo has developed a technology where a floating buoy generates electrical energy at sea surface, from ocean waves.

One of the units, the BOLT Lifesaver, has been engaged at US Navy test site in Hawaii. Weighting 56 tons and spanning 16m diameter, Lifesaver has three winched onboard, winch lines connected to seabed. During the summer of 2018, one ton of ocean sensing and subsea wireless power transfer equipment was installed onboard BOLT Lifesaver, and October 12th 2018 the complete system was installed on test site. Lifesaver stores some of the generated power in an onboard battery bank. The sensor package continuously draws 0.5-1kW of power from this battery bank. As we speak, the system has been installed for 61 days. She has generated power non-stop since installation, 3kW average, and have been able to supply the client sensor package it’s nominal power draw for 79% of the time, allowing for over 1.100 hours of operational hours so far, uptime only previously achieved by use of cable from shore.

Fred. Olsen is now working on configuring the Lifesaver technology to a small, single winch version at 5m diameter, 10 ton weight, that can be quickly installed and recovered, and export the generated power through the winch line down to seabed to power UID docks and provide communication from seabed to surface and shore, thus allowing UID docks to be installed independent of available power and fiber infrastructure, hence greatly increasing capability of resident UID systems in subsea operation.

June 13th, 10:30-11:00, Track 3 @Troldtog Dynamic and Static Submarine Cable Systems for Hywind Scotland - World’s first Floating Offshore Wind Farm Maxime Toulotte, NEXANS

After successful supply and installation of the dynamic submarine export cable for the Hywind Demo project in Norway in 2009, Nexans was awarded in January 2016 for the supply of the export and infield submarine cable systems for the Hywind Scotland Pilot Park Project. The scope included the engineering and supply of the dynamic and static submarine cables, together with the associated accessories (electrical & mechanical accessories to achieve the dynamic configurations of the 9 risers). The project was initiated with a phase of detailed design engineering, where numerous complex simulations were executed, amongst other the dynamic analysis including fatigue, extreme and interference analysis, thermal analysis, etc.

These analyses were performed in order to verify the shape of the dynamic configuration, the cable designs at various points including the landfall and the entrance to the floater, and to collect the specific data to achieve the detailed engineering of the dynamic accessories. The cable load-out was completed as planned in end of July 2017, followed by the cable installation performed by Subsea 7.

The presentation will give an overview on the entire dynamic and static submarine cable system, including an insight on the design of the submarine cables and a description of all the accessories for this project, where numerous innovations were performed, such as the development of a weak link hang-off, pre-terminated pulling head, etc. Providing acceptance of Subsea 7, a presentation of the cable laying operation will also be displayed.

June 13th, 11:00-11:30, Track 3 @Troldtog Low-carbon emission field developments Torkild R. Reinertsen, REINERTSEN NEW ENERGY

The oil and gas industry has set out to develop low-carbon and cost-efficient production systems. In Norway, 25% of the CO2 -emission comes from the oil and gas production. CO2-emission from generation of energy to drive compressors and pumps often represents more than 90 % of the total emission from offshore production systems. REINERTSEN New Energy has developed a new concept for “Pre-combustion CCS” suitable for deployment on offshore platforms (< 100 MW). The clean and efficient production of hydrogen is made possible by compact reformer-technology and Palladium membrane separators. The hydrogen is to be used as fuel in new or modified turbines, or in future fuel-cells.

Another concept, the EFHP (Emission Free Hydrogen Production), has been developed for large-scale and clean hydrogen production on-shore, with CCS. Clean and competitive power can be supplied from shore to platforms and subsea facilities. The building of a large demo-plant is being considered.

The paper will discuss how the “life of field” energy consumption and economy for the oil- and gas fields can be optimized. The economics, including CO2 -void cost will be presented. The new hydrogen and CCS solutions require subsea pipelines, infrastructure, production-facilities, and subsea wells.

The state of the art of storage and transportation of hydrogen, and the transportation, injection and storage of CO2 will be presented. The potential for new, Norwegian (subsea) gas projects to serve the new hydrogen markets will be discussed, together with the need to bring forward new technology and innovative solutions.

DAY 2 - PARALLEL SESSION #4 Track 1 @Peer Gynt

13 JUNE Parallel Session #4

June 13th, 13:00-13:30, Track 1 @Peer Gynt

Subsea Data Transparency: Bridging the Operations team / OEM gap with data sharing John Murray, AKER SOLUTIONS Historically, subsea original equipment manufacturers (OEMs) lack visibility of product performance in the field. Customers share feedback only when failures occur, often with limited context recorded. In addition, OEMs are often not informed of component failures that do not impact production or trigger maintenance actions, due to the high redundancy level of subsea equipment. Today, advances in cloud computing technology enables effective sharing and use of data, providing the ability to rapidly develop analytics and extract value through visualization. This has renewed the focus on improving product reliability and production uptime through active condition monitoring.

This joint paper will discuss a live subsea data sharing pilot between Aker Solutions and BP. It will present the view from both companies as to the challenges, current and future value. The objectives of the pilot are to improve responsiveness of Aker Solutions’ service team and move from reactive to proactive support of BP operations. Access to data will provide efficiency gains in diagnostic and support capability, closing out issues faster and reducing offshore trips and HSE exposure. Product performance and reliability data will be fed back into product design improvements that will increase future product reliability. Building a baseline of data and applying OEM domain knowledge with the latest techniques in machine learning aims to produce predictive and prescriptive maintenance in the long term. Active monitoring and understanding of product performance is essential to producing more reliable products, and understanding risk in new business models, such as uptime service contracts and equipment leasing.

29

June 13th, 13:30-14:00, Track 1 @Peer Gynt

Does big data mean better data?

Nivedita Kumar, OCEANEERING We are in a world of exponentially growing data sets. ‘Big data’ is a key buzzword and a real trend reflecting the rapid growth of digitalization within the oil and gas industry. Big data by itself is just numbers. Predictive analytics is what makes it so powerful i.e. the ability to model the world, predict events and make data-driven decisions with accuracy. The increasingly widespread interest in using ‘big data’ sets to make informed decisions via predictive analytics leaves us with two important open questions. To what extent does big data help in answering questions to problems that actually matter? Does bigger data mean better predictive performance?

In this talk, using a case study, we will numerically demonstrate that ‘little data’ goes a long way. Using predictive analytics we produce a truly optimized inspection program for a hydrocarbon piping system susceptible to internal corrosion. The results are based on inspection data from one of the biggest oil & gas companies in the world. We show that most of the inspection points can be inspected at longer intervals, reducing inspection scopes by ~ 40%. This implies that using less data we can achieve better focused results.

Track 2 @Klokkeklang

Parallel Session #3

June 13th, 13:00-13:30, Track 2 @Klokkeklang

Easily accessible live sensor data as a tool for monitoring and maintenance services subsea Arve Værnes, COGNITE One of the most important areas where leveraging live instantly accessible data can provide clear short term and long term gains are Condition Monitoring (CM) and Condition Based Maintenance (CBM) of the subsea equipment. When leveraging instantly available times series data from IIOT sensors which are mapped to context data (sensor metadata, process diagrams, events, etc) one can track deterioration mechanisms of the subsea equipment remotely and plan interventions in advance in order to assure minimum downtime. A planned intervention may give a 1-day shutdown and allow for several planned concurrent activities to be executed, while an unplanned can give a 30-day shutdown. Any advance warning that equipment is about to fail thus results in shorter shutdown, prepared and planned activities, and less deferred production. However, in order to achieve this, a strong and scalable infrastructure with necessary APIs needs to be in place. A key for setting up advanced visualizations for live monitoring of the equipment is the ability to easily access contextualized data using such APIs. The presentation will focus on the technological foundation within a data platform that provides scalable access to sensor and all related data and how live data and real-time visualizations, as well as ML algorithms, are leveraged to both optimize operations and optimize maintenance of subsea equipment.

June 13th, 13:30 - 14:00, Track 2 @Klokkeklang

Safety 4.0 - Demonstrating safety of novel subsea technologies Tore Myhrvold, DNV GL Subsea is important for Norway and new concepts emerge due to need for cost reductions. Innovations are encouraged by regulations, but existing standards and guidelines may not provide relevant support for demonstrating safety of such new concepts. This restricts the envelope of solutions and may impose excessive costs. Examples are all-electric and digital technologies that challenge existing safety philosophies, but also provides new opportunities for risk management. The objective of the Safety 4.0 project is to enable faster demonstration of safety for novel subsea solutions. This will be done by developing a new safety demonstration framework, which is: modular, facilitating reuse of safety arguments, risk based, and addressing safety from a systemic and life cycle perspective. The framework is developed based on relevant use cases together with industry partners: i) All-electric safety systems, ii) Integration of process control and safety, and iii) Efficient use of sensors and data analytics.

The initial phase of the project identified a set of gaps, challenges, and opportunities. The focus is currently on the scope of regulatory requirements and the applicability of existing safety philosophies, such as requirements to fail-safe and segregation / independence, and functional hazard analysis. Safety 4.0 is an industry innovation project partially financed by the Norwegian Research Council (PETROMAKS2), with a total budget of 19 million NOK, running from 2018-2021 (3.5 years). The project involves 8 industry partners and two universities, funding a PhD and a post doc. The Petroleum Safety Authority Norway participates as an observer.

Track 3 @Troldtog

Parallel Session #4

June 13th, 13:00-13:30, Track 3 @Troldtog

Case Study on Opex Savings Using All-Electric Technology Ana Serrentino, ONESUBSEA All-electric subsea production systems have been around since the late nineties. Using a rigid product development and qualification program, various technologies have been already developed, installed, and deployed on subsea projects. This technology brings many advantages to the industry by enabling long tie-backs, eliminating hydraulics from the seabed, mitigating HSE risk through zero discharge, and saving costs. Operational advantages include realtime controls and more data for condition monitoring.

In the current market, evaluating technologies for projects comes down to cost. All-electric systems offer savings not only in capex but opex, which is, more often than not, overlooked. Opex advantages include the removal of hydraulics and the reduced maintenance required during the life of the field.

Furthermore, the additional data for health and condition monitoring enables the system to have smarter maintenance programs in place. Finally, because of the built-in redundancy of the all-electric system, any required intervention for electrical purposes can potentially wait for a planned intervention instead.

The purpose of this presentation is to highlight the cost savings that all-electric systems bring to subsea operations, with a greater focus on the overshadowed opex. The intent is to showcase the cost impacts beyond capex as well as how these systems can impact projects throughout the life of the field.

June 13th, 13:30-14:00, Track 3 @Troldtog WIN WIN – oil & gas joining forces with offshore wind Marte Aaberg Midtsun, DNV GL

The world’s energy industry is currently in a time of transition, endeavoring to supply the world with affordable, clean and reliable energy to meet the increasing demand. DNV GL proposed in 2014 the WIN WIN (WINd powered Water Injection) concept, combining the development of floating wind turbine technology with the oil industry’s need for maximizing oil recovery and reducing costs and emissions. The concept is a fully stand-alone system, comprising a floating wind turbine supplying power to a water injection process.

30

Participants from the industry have between 2015 and 2018 worked together in two phases of a DNV GL-led Joint Industry Project (JIP) to develop the WIN WIN concept. Vår Energi and ExxonMobil were partners in the second phase of the JIP, with the Norwegian Research Council as additional sponsor. The concept consists of proven components subjected to a new application. The electrical system and controls represents a critical subsystem.

Advanced simulations and testing of this subsystem have successfully been performed in DNV GL’s Power Laboratories. Based on the results, the concept has increased its TRL and is ready for prototype validation. A WIN WIN type system could be developed with multiple configurations, designs and applications. Such applications include subsea or topside applications. It could be implemented in deep or shallow water, for greenfield developments or related to field lifetime extensions.

This presentation aims to share some of the learnings from the WIN WIN JIP, representing the first commercially competitive step to integrate wind technology with oil & gas operations.

DAY 2 - STUDENT PRESENTATIONS

13 JUNE

June 13th, 08:30-08:50, Track 1 @Peer Gynt

Experimental and Simulation Qualification of an Electro-Hydrostatic Subsea Valve Actuator João Pedro Duarte da Silva, Amadeu Placido Neto, FEDERAL UNIVERSITY OF SANTA CATARINA (UFSC), Florianópolis, Brazil 1. Objectives In this work, the performance of a novel electro-hydrostatic subsea valve actuator prototype – particularly devised to operate with 2 inches gauge gate valves at depths of up to 3.000 meters – is evaluated by simulation and validated experimentally. Such actuator – currently under development – is designed to operate under the harsh working conditions present in the subsea environment, namely the high external pressure and variable well conditions. Furthermore, additional design targets such as power consumption minimization shall be validated.

2. Methods In order to reproduce the nominal opening/closing dynamics of a gate valve under operation conditions, the valve/actuator system has been modelled mathematically and numerically simulated. A test apparatus comprised of a hydraulic load cylinder, a compact hydraulic power unit, a servo-valve and an electronic control module has been devised. The pressure differential in the load cylinder is then controlled as a function of the actuator position according to the valve behaviour. Additionally, the tests are carried out in a container with controlled temperature.

3. Results The performance of the system in terms of functionality and efficiency is assessed and demonstrated under the influence of different ranges of temperatures, operation loads and power supply constraints. The outputs of this research are simultaneously the proof-of-concept of the actuator for subsea control systems and the validation of its mathematical models, which allows for further analysis of the system’s behaviour.

June 13th, 08:50-09:10, Track 1 @Peer Gynt Redesigning Subsea Production System (SPS) for Efficient Utilization of Autonomous Underwater Vehicles (AUVs) Natalie Melchior, Maria Sognnes , Hannah Clark and Derrick Hansen, WESTERN NORWAY UNIVERSITY OF APPLIED SCIENCES, Bergen, Norway

Asset integrity management of subsea equipment in Norwegian Continental Shelf poses considerable problems due to the depth and harshness of North Sea. Inspection and maintenance activities in these subsea conditions raise concerns regarding safety of personnel and economics of current practices.

Recent advances in the development of autonomous underwater vehicles (AUVS) offer attractive options for utilization of these vehicles for carrying out tasks from safe working environment and at cheaper rates.

In a collaborative project, HVL and Equinor are looking at possibilities for an efficient combination of Autonomous Underwater Vehicles (AUVs) and Remote Operated Vehicles (ROVs) to one underwater drone and a compatible Subsea Production System (SPS) for reliable and efficient inspection and maintenance purposes.

This paper first explores the applications of ROVs for inspection and maintenance of existing SPS systems. Based on this study, the paper proposes a set of future drone designs with compatible templates for better access and easier maintenance operations. Finally, the paper looks into applications of heterogeneous sensor solutions to make the AUVs more suitable for the tasks.

June 13th, 09:10-09:30, Track 1 @Peer Gynt Analysis of Sand Erosion on Subsea Chokes Lise Margrethe Rinde, UNIVERSITY OF BERGEN, Norway

Choke valves in pipelines are ubiquitous for many subsea engineering processes. Conveyance of particles in a flow through choke valves causes erosive wear of the structure material. During well clean-up, drilling debris and fluids come out of the formation causing higher erosion rates than under normal production. Some of this debris does not come up during clean-up operation and could come up during normal production. Erosion is caused by collisions of solid particles along the pipeline structure and removes surface material. For most oil and gas fields, sand from reservoir formation is an inevitable byproduct. Therefore it is crucial to understand the behavior of sand particles during production. Proper estimation of erosion rate contributes a key to keep the production financially efficient.

This contribution shows results of a CFD analysis of the behavior of erosion processes in a choke valve. STAR-CCM+ is the software used to simulate turbulent real gas with sand particles. The injection rate was 50 particles per second was injected into the fluid domain of more than 3 million cells.

The effect of different particle size and erosion models was considered. By increasing the particle size 160%, the erosion rate increased 455%, for certain particle sizes. Recommendations and problems with sand production are discussed, providing new information of erosion on chokes in choke valves.

31

32

33

Scan me for subscription offers.

A wise investment Give yourself an advantage. Give yourself Upstream.

Upstream offers exclusive and comprehensive news and analysis every week through Upstream’s newspaper and continuously on UpstreamOnline.com You get unlimited access to the archive and the Upstream App, and you get the complete overview of the global upstream industry through monthly in-depth features.

“Some 84% of Upstream subscribers have identified new business leads or opportunities from reading Upstream” TNS GALLUP

Finally, you get peace of mind, knowing that you are on top what is going on in your business.

Make your investment today.

Just scan the QR-code, go to www.upstreamonline.com/subscribe or send an e-mail to subscribe@upstreamonline.com for subscription offers today!

SPS Supplier Specific Equipment and System

SPS supplier A

SPS supplier B

X-mas Tree Gas Injection

Booster or Injection Pump

Control Module

Choke, Bridge Module Flow Meter

Pig Reciever Launcher

Single and Dual Protection Well

X-mas Tree Water Injection

SPS supplier C

Grip Protection Structure to suit Hinges and Deflectors on Skid

The smarter well foundation The CAN-integrator facilitates early production by enabling pre-rig well construction and marine operations.

34

neodrill.com

X-mas Tree Production

Integrate.

Innovate.

Accelerate. iEPCITM: the only sole source, end to end, fully integrated subsea solution. From front-end engineering, to project execution, to life of field services, TechnipFMC streamlines processes, reduces risk, and accelerates time to first oil and gas. Get in touch today to learn more about how we can optimize your entire subsea development process.

Improve your subsea outlook at TechnipFMC.com

TechnipFMC Underwater Technology Conference 210mm x 150mm

TECHNOLOGY FOCUSED PROJECT SOLUTIONS FOR CHALLENGING SUBSEA OPERATIONS

swireseabed.com

A5_Swire_Ad_AW.indd 1

23/05/2019 11:46

35

ORGANIZING PARTNERS FOR UTC 2019 Society for Underwater Technology SUT is a worldwide, multi-disciplinary, learned society that brings together organisations and individuals with a common interest in underwater technology, ocean science and offshore engineering. SUT was founded in 1966 and has members from more than 40 countries, including engineers, scientists, other professionals and students working in these areas.

The organisation has comprehensive expertise within its area of activity, whereby it influences the development of new techniques to further explore and exploit the world’s oceanic resources, such as through annual prize-giving ceremonies.

Today the association is established in London with branches in Bergen, Aberdeen, Houston, Rio de Janeiro, Perth, Melbourne, Kuala Lumpur and Lagos, where they carry out learned courses and programmes for members and others who are interested in subsea technology and their wide range of other ocean-related activities. The latest branch, SUT Norway (Bergen) was established in 2009.

SUT Norway is a non-profit organisation, to be developed through networking and interaction between individuals and companies working professionally with underwater technology. Its objective is to facilitate the exchange of knowledge and information, e.g. by arranging courses and seminars with agendas relevant to subsea activities.

WWW.SUT.ORG.UK

SPE Bergen Society of Petroleum Engineers (SPE) is a professional association whose 150,000-plus members worldwide are engaged in energy resources development and production. Local sections of the SPE are established around E&P communities all over the world. SPE Bergen Section is one of five sections in Norway. We host a variety of activities and events, focusing on networking and knowledge.

SPE Bergen hosts regular member meetings, the annual SPE Sailing with the Statsraad Lehmkuhl in late spring, SPE Bergen Lutefisk in early winter and the SPE Bergen YP.lnk hosted by our YP program.

Our largest event during the year is the annual SPE Norway One Day Seminar in April. This international E&P conference and exhibition attracts some 500 participants and approximately 45 exhibiting E&P companies.

SPE recognizes the importance of those who one day will be leaders of the E&P industry. Along with many SPE sections, the SPE Bergen Section has developed a Young Professionals (YP) programme, to support and assist those in the industry with fewer than ten years of experience.

SPE also offers student memberships. The SPE Bergen Student Chapter counts about hundred members and is the most important link between students and the petroleum industry in the Bergen area. The SPE Bergen Section is proud to support and sponsor one of the world’s largest and most vibrant SPE student chapters.

The chapter hosts its own events, and students also participate on regular section events.

WWW.BERGEN.SPE.NO

Reliable innovation for over 30 years.

You can't spell innovation without NOV. For more than three decades, NOV has been a driving force in offshore innovation and subsea infrastructure. From intelligent risers, subsea storage and subsea water treatment to flexible pipe systems that ensure maximum uptime, NOV is proud to be a leader in the offshore industry.

To find out more, visit nov.com/subsea

© 2019 National Oilwell Varco I All Rights Reserved

36

UTC SUBSEA AWARD 2019 The Underwater Technology Conference (UTC) Subsea Award is designed to recognize the many outstanding achievements within the subsea industry.

The award can be given to a person or a group of people that have contributed to knowledge and understanding in subsea technology through new products, services and/or processes.

On the basis of UTC position in the industry, UTC will credit the individuals behind new breakthroughs and innovation.

Furthermore, we will share the story of the winner, through our website and newsletters, to a wider audience outside the UTC conference halls.

The objective is to tell everyone with a brilliant idea what it takes to succeed and what all the work resulted in for the industry.

The jury has been appointed by the UTC board and consists of prominent individuals from valuable UTC partners.

UTC Award Winner 2015 The first UTC Subsea Award was awarded Tracerco for their Discovery at UTC 2015. The jury recognized Discovery’s™ innovative technology, the large global potential, the fact the technology is field proven with excellent results and that it contributes to both operators, IMR companies and suppliers.

Paul Featonby, Technology Manager and Tim Hough, Discovery Technology Lead, both at Tracerco, are recognized for the technology and project execution.

UTC Award Winner 2016 The winner of the second UTC Subsea Award 2016 was OneSubsea® Multiphase Compressor. Bernt Helge Torkildsen and Simon Kalgraff, OneSubsea, and Jarle Ottar Hella and Caroline Bøe, Equinor was recognized for their significant contributions to the OneSubsea’s Multiphase compressor technology.

UTC Award Winner 2017 The winner of the 2017, and third UTC Subsea Award was Åsgard Subsea Compressor. Lars Brenne, Equinor, Tor Bjørge, Equinor, Svend Tarald Kibsgaard, Equinor and George Kleynhans, MAN Diesel and Turbo all clearly demonstrated the value of Collaboration, Multidicipline expertise and last, but not least, Persistence, to make a difference and drive technology and our industry forward.

UTC Award Winner 2018 The winner of the fourth UTC Subsea Award 2018 was presented to Kaj-Ove Skartun, Leading Subsea Engineer at Equinor, and Arve Iversen, ROV Operations Manager, Oceaneering, as leaders and representatives of the E-ROV project. The E-ROV concept is a battery-powered electric work class ROV which can be piloted from shore, via a communication buoy, without the support of a surface vessel.

The fifth UTC SUBSEA AWARD will be presented at UTC, June 12th 2019.

THE JURY: Bjørn Søgård, Segment Director, Business Development, Subsea and Floaters, DNV GL Elaine Maslin, Subsea industry journalist Mads Hjelmeland, Global Sales Director – Processing Systems, OneSubsea Karl Ludvig Heskestad, Senior Reservoir Engineer Business Development, AkerBP Stig Instanes, Sales Manager, TechnipFMC Dr. Gisle Nondal, R&D Manager, GCE Subsea

The winner of the 2018 UTC Subsea Award was presented to Kaj-Ove Skartun, Leading Subsea Engineer at Equinor, and Arve Iversen, ROV Operations Manager, Oceaneering, as leaders and representatives of the E-ROV project. Photocredit: ManiMedia_UTC

37

UTC PROGRAM COMMITTEE 2019 JON ARVE SVÆREN (CHAIR) Chair UTC 2019 Program Committee/ Head of Business Strategy, OneSubsea Jon Arve graduated from Bergen Tech Collage in 1979 – BSc Engineering. Started his career in Frank Mohn AS , the world Leading supplier of cargo pumps for product and chemical tankers same year. He had many different positions in application engineering, sales and business development including responsibility for the capture of the production system for Oseberg subsea satellite project as early as 1986.

Sales manager for Oil and Gas division from 1990 -94. Jon Arve started in Framo Engineering in 1994 in sales and business development with global responsibility for the complete range of products ranging through subsea multiphase meters-, multiphase pumps , wet gas compressors and swivel systems for FPSO’s . He took an active part in the formation of OneSubsea in 2013 with an executive position at the Houston Head office for the first years of operations. Current position is Head of Business strategy. Jon Arve is also Chairman of the Board of Global Center of Expertise (GCE Ocean ), a cluster of some 120 member companies in the subsea industry.

THOMAS SUNDE Deputy Chair UTC 2019 Program Committee/ VP Technology, Subsea 7 Thomas has been with Subsea 7 since 1997. A Masters graduate in Marine Technology from the Norwegian University of Science and Technology in Trondheim, he began his career with Equinor before moving to Subsea 7. In Subsea 7, he has held various roles in both the engineering, project management and commercial functions, including Vice President Sales & Marketing for both APME and NSC regions.

Thomas has been Vice President for Technology for Subsea 7 since 2015.

JAN-OLAV HALLSET Senior Project R&D Engineer, A/S Norske Shell Jan-Olav graduated as PhD in Engineering Cybernetics from the Norwegian University of Science and Technology (NTNU) in 1992.

He joined AS Norske Shell in 2014 as a Team Lead for Subsea Controls and has recently moved on to a position as Senior Project R&D Engineer, responsible for technology deployment within Norske Shell’s project portfolio. He has more than 25 years of experience within the oil & gas industry, and has held various technology and technology management positions within Oceaneering, Hitec Systems, Poseidon Group, and Siemens Subsea.

KNUT RONGVE Global Product Manager for Subsea, ABB Knut graduated as Master of Science in Electrical Power Engineering from the Norwegian University of Science and Technology (NTNU) in 2003. He joined ABB in 2006 as Project Engineer for Oil, Gas and Petrochemicals in Norway. He has held various technical and management positions within the organization. Knut is currently leading ABB’s Subsea Growth Initiative and the overall activities within subsea, including Global Product Manager for Subsea, on behalf of the ABB BU OGC

MARIE BUEIE HOLSTAD Chief Scientist, NORCE Norwegian Research Centre AS Marie graduated as Dr. Scient in industrial instrumentation from the University of Bergen in 2004. She started working as a development phycisist for Tracerco, supplier of measurement systems and diagnostics services for subsea and topside offshore industries. Marie has since 2007 been working for Christian Michelsen Research AS, a research institute which merged with five other institutes and is now NORCE. She has been focusing mainly on R&D management and measurement technology R&D for the oil and gas sector, including subsea measurement concepts and studies. Marie currently is Chief Scientist in NORCE, developing measurement technologies for the oil and gas industry as well as other market areas.

TROND OLSEN President, ClampOn inc Trond Olsen has worked in a wide variety of professional capacities in both the private and public business sectors. He spent 15 years in the Royal Norwegian Navy in operational and project management positions. After a career in the Navy, he has held management positions with small and medium sized enterprises, among them as Operations Manager for a subsea company and seven years as CEO for the Norwegian Centre of Expertise Subsea. Trond has been chair of the program committee at the Underwater Technology Conference for three consecutive years (2011-13). In addition, he has been Exhibition Chair for MTS/IEEE OCEANS 2013 and on the committee for several other subsea events.

He attended the Royal Norwegian Naval Academy, level 1 and 2, and earned his Master’s degree in Management from the Norwegian School of Management (BI). In September 2014, Trond became the President of ClampOn, Inc. – the global leader in ultrasonic intelligent sand, PIG and corrosion-erosion monitoring.

ANDERS HUSBY Business Development Leader, Well and SURF, DNV GL Anders Husby has more than 20 years of experience within the oil & gas industry. Currently being Business Development Leader for Well and SURF (including SPS) in DNV GL. Experience covering subsea, drilling & well, including development of rules and regulations, and Joint Industry Projects. Background as piping engineer, lead engineer, and engineering manager. He also worked within line management and commercial tender work for numerous years before joining DNV GL in 2008, lastly with GE Oil & Gas from 1997 to 2008.

38

HANS KRISTIAN SUNDT Product Management Leader, Baker Hughes – a GE Company Hans Kristian graduated from the Norwegian University of Science and Technology in 2000 with an MSc in Chemical Engineering.

He has more than 10 years of experience within technology development and sales in the oil and gas industry. He started his career as a topside process engineer and has since followed new products from the initial idea, through the development and finally to the market. In 2008 he left dry land and joined the subsea community. Hans Kristian currently works with GE Oil & Gas as Product Manager for Subsea Processing.

ROLF RØSSLAND Managing Director, NUI Rolf Røssland has been Managing Director for NUI AS since 2014. NUI is a Company that provides the subsea industry with a great diversity of products and services, ranging from advanced research, hyperbaric contingency and performance testing to engineering, training, consultancy services, and pressure/equipment testing. Rolf Røssland has nearly 40 years’ experience from the offshore industry, mainly within Diving, Underwater Operations, Safety Training and HSEQ. He has held several positions such as Diver, Diving Supervisor, Consultant, HSEQ Director and Managing Director. Having an operational background the main focus has been, and still is, to participate in the industries work to perform safe and effective operations. He is a frequent speaker and a member of the UTC Council and the Program Committee for The Bergen International Diving Conference.

OWE HAGESÆTHER Chief Executive Officer, GCE Subsea Owe Hagesæther has more than 25 years of varied experience from Technology Management, Change and Project Management, Top Management and Board positions, International Networking, Marketing, Sales and Business Development. He has his experience from industries such as Oil & Gas and Energy, Banking & Finance, IT & Telecom, Management Consulting and Maritime Technology.

Hagesæther is an entrepreneur and former Founding Partner of Nordic Integrator Group. He holds an MSc in Computer Science from the University of Bergen and an MBA in Strategic Management from Norwegian School of Economics.

MERETHE BERGE PAASCHE Marketing & Communications Manager, Oceaneering Merethe Berge Paasche is the Business Development Manager for Oceaneering AS with responsibility for maintaining and development of growth strategy, brand development, customer relationship management and value-based sales management. Merethe graduated from the Norwegian School of Information Technology (NITH) in 1992. She has over 15 years experience in the oil and gas industry, within completion, drilling, and subsea services. The last 8 years she has held management roles in Oceaneering within Marketing and Business Development. Prior to joining Oceaneering, she was employed by Baker Hughes and Odfjell Well Services.

GUNN VIK Director for Hydropower, Brazil and shipyards Korea in Norwegian Energy Partners Gunn has worked 30 years with oil and gas activities in Equinor (former Hydro and Statoil). She has 20 years’ experience within supply chain management. She has been manager for several years and held a Vice President position in Equinor within procurement and supplier relations for 7 years, both within drilling and well procurement and operation and maintenance procurement. Gunn was seconded from Equinor to Norwegian Energy Partners for 4 years (2013-2017) as Regional Director for China, Singapore and Korea.

BJØRN KÅRE VIKEN Vice president of Projects and Technology Collaboration (PTC) in Equinor Research and Technology Viken was previous Country manager and Senior Vice President of Algeria (ALG) in Development and Production International.

Viken joined Statoil in 1992 after nine years in Elf Aquitaine Norway. He has held various leadership positions both on- and offshore within operations in Development and Production Norway (DPN), headed up the Mongstad refinery in Marketing Manufacturing and Processing (MMP) and been responsible for marine and subsea technology in technology development and implementation. He holds a BSc in civil engineering and a master of petroleum engineering from University of Stavanger.

KJARTAN PEDERSEN PhD Senior Specialist Engineer, Aker Solutions More than 25 years’ experience in the Offshore Oil and Gas industry. Holds a MSC in Marine Engineering from NTNU, and a PhD in Mechanical Engineering and Product Development from Georgia Institute of Technology. He is also a Six Sigma Black Belt and have worked with continuous improvement on and off since 2003. He started his work with innovation in the Kværner Concept group in 2000 and has worked with Technology Development & Innovation on and off since then. He is a member of the OG21 Board and SINTEF’s Industry Advisory Board. Currently he works with Research & Innovation in Aker Solutions with a special focus towards strategy and early startups.

NEIL ADDISON Subsea Engineering Manager, Aker BP Neil has been responsible for Subsea Engineering in Aker BP, and previously BP Norge, since 2014. He graduated in 2002 with a degree in Chemical Engineering from Strathclyde University. Neil began his career in the nuclear industry, before moving into oil and gas in 2006.

Since then he has held various Subsea Engineering project, operations and leadership roles.

39

UTC 2019 EXHIBITORS THE OPERATOR HUB AKER BP

Aker BP is an exploration and production company on the Norwegian Continental Shelf. We are one of the largest independent oil companies in Europe, and we have a clear ambition; to become the leading offshore exploration and production company. We are challenging standard practices in the oil and gas industry, and are targeting further opportunities for growth and value creation through both exploration and merger and acquisition activities. The company has a balanced portfolio and is the operator of the Valhall, Ula, Ivar Aasen, Alvheim and Skarv field hubs. Aker BP’s net production in 2017 was 160 thousand barrels of oil equivalents per day. At the end of 2017, the company had 1,371 employees. Aker BP is headquartered at Fornebu outside Oslo and has offices in Stavanger, Trondheim, Harstad and Sandnessjøen. Aker BP ASA is jointly owned by Aker ASA (40%), BP (30%) and other shareholders (30%).

EXHIBITORS 3D AT DEPTH INC

3D at Depth, Inc. provides advanced subsea LIDAR (SL) laser systems, survey support services, and 3D data collection, visualization and analysis solutions to help clients optimize marine, underwater and offshore survey campaigns. The precise, repeatable, millimetric 3D point clouds acquired through patented SL laser technology provides greater insight to measure, map and evaluate underwater assets, resources, and environments. From data collection and processing, through visualization and analysis, clients can "measure in 3D and manage in 4D" to increase operational efficiencies and reduce downtime. The Company's locations in Australia, Europe, and the United States support customer survey operations around the world. For more information and a broader listing of services visit us at www.3datdepth.com.

4C SOLUTIONS AS (4CS)

4C Solutions AS (4CS) is an EPC supplier of subsea and surface products mainly for the offshore industry. The 4CS main office is located at Randaberg just outside Stavanger.

The main 4C Solution product range is EPC deliveries of: • Pipeline and subsea repair systems and components • Diverless tie-in systems for bolted flanges • Subsea Structures; such as PLEMs, PLETs, SSIVs manifolds and spools • Pig launchers and receivers • Running tools, installation aids and subsea/ROV tooling • Inline, hot-tap and retrofit tees Partner Companies are: • DesignBanken AS, Stavanger • Randaberg Industrier AS, Randaberg • Malm Orstad AS, Voll, Jæren • Isotek Oil & Gas Ltd, Leeds, UK

BAKER HUGHES GE

Baker Hughes, a GE company (BHGE) is the world’s first and only fullstream provider of integrated oilfield products, services and digital solutions. We deploy minds and machines to enhance customer productivity, safety and environmental stewardship, while minimizing costs and risks at every step of the energy value chain. Please come and discover our new Lightweight Compact Subsea Tree. Designed to radically simplify subsea production, the new tree maximizes recovery and enables greater flexibility over the life of field. It’s the first building block in a new system of smart equipment from BHGE. For more information, visit us at BHGE.com.

BLUE LOGIC

Blue Logic AS is a Subsea System- and product company with expertise in hydraulic, mechanical and electrical connections / interfaces. The company has proprietary products for intervention and permanent installation, including inductive connections used for charging of drones. The company undertakes studies and special projects / assignments / deliveries within all subsea disciplines. Read more about Blue Logic AS at www.bluelogic.no Subsea Electrical Test Tools for fault-finding and constructionCASTROL OFFSHORE/BP FUELS campaigns Castrol Energy Lubricants provide a full range of subsea control fluids, lubricant solutions and specialist chemicals to • Save multiple days vessel time • Cut downtime and get fields operational • Fast, repeatable and reliable

the global Oil & Gas Industry. We are a one stop shop for all offshore lubrication issues – Subsea Production, Surface Production & Drilling.

C-Kore automates the entire testing process, achieving significant cost savings with their Subsea IR, CR, TDR, Pressure and Shock & Vibration units.

It’s safe for use on all subsea infrastructure, giving you better data faster.

C-KORE

www.c-kore.com

C-Kore Systems NEW is an innovative UK company bringing fast and reliable testing techniques to the offshore industry.

PRODUCT Their Subsea Electrical Tools for fault-finding, construction and decommissioning campaigns save customers money Subsea TDR while providing fast and accurate data. C-Kore automates the entire testing process, achieving significant costs savings measuring IR and confirming the integrity of subsea cables. Their Subsea TDR quickly localizes faults in electrical lines with a precision of 10cm.

NEW Sensor Monitor tool reads subsea sensors even after SCMs are removed, ensuring safe Tel: +44 (0)The 1904 215161 | Email: sales@c-kore.com decommissioning operations by proving wellhead’s pressure levels.

Subsea testing is no longer left up to error-prone manual measurement, using down-lines of dubious condition or burdensome platform-led testing. C-Kore eliminates these activities, testing much faster by automating the entire testing process, saving days of vessel time.

40

CLAMP ON ULTRA SON IC INTELLIGENT SENSORS

ClampOn is the industry leader in non-intrusive sensors for Sand, PIG, Vibration, Leak, and Corrosion-Erosion monitoring. All sensors incorporate proprietary DSP ultrasonic intelligence for subsea and topside hardware applications.

We work with our customers in the oil & gas industry to optimize their productivity and to safeguard their investments. www.clampon.com

DEEPOCEAN

DeepOcean is an integrated provider of safe, high quality, innovative services and technologies for the subsea industry.

Demonstrating an extensive track record, DeepOcean offers a breadth of subsea services, including Survey and Seabed-mapping, Subsea Installation (SURF), Seabed Intervention, Inspection, Maintenance and Repair (IMR), and Decommissioning for the oil & gas, renewable and power transmission industries. DeepOcean delivers innovative engineering solutions and turnkey project management for complex offshore operations. The company is a leading IMR, SURF installation and trenching contractor in the Greater North Sea and has a global presence with offices in Norway, United Kingdom, United States, Netherlands, France, Mexico and Ghana.

DNV GL – OIL & GAS

DNV GL is the technical advisor to the oil and gas industry. We bring a broader view to complex business and technology risks in global and local markets. Providing a neutral ground for industry cooperation, we create and share knowledge with our customers, setting standards for technology development and implementation. From project initiation to decommissioning, our independent experts enable companies to make the right choices for a safer, smarter and greener future.

EELUME

Eelume is a technology company developing robotics for subsea IMR operations. Eelume is based in Trondheim, the technology capital of Norway. The disruptive robotic technology is based on over 15 years of research at NTNU AMOS. The robot EELY can be described as a modular robotic arm and sensor carrier, that delivers services to the Oil and Gas market with a highly improved carbon footprint. Some features the Eelume robot provides are: • Flexible joints, - for agile operations in previously inaccessible and confined areas • Subsea resident • 24/7 operation • Fully autonomous • Long distance transits • Inspection of subsea asset • Environmental surveys • Valve operations • Gas detections • Agile maneuverability

EQUINOR

We’re Equinor, an international energy company with a proud history. Formerly Statoil, we are 20,000 committed colleagues developing oil, gas, wind and solar energy in more than 30 countries worldwide. We’re the largest operator in Norway, among the world’s largest offshore operators, and a growing force in renewables. Driven by our Nordic urge to explore beyond the horizon, and our dedication to safety, equality and sustainability, we’re building a global business on our values and the energy needs of the future.

GCE OCEAN TECHNOLOGY

GCE Ocean Technology is an industry driven initiative within ocean technology. The cluster develops and supplies innovative ocean technology within a wide range of applications, including subsea oil and gas production, marine renewable energy production, marine food production and exploration of marine mineral resources. GCE Ocean Technology’s combination of participants makes the cluster an optimal innovative ecosystem and a global knowledge hub.

HYDPRO

HydPro´s core business are design and production of hydraulic/mechanical equipment according to customer specifications.

We provide service and maintenance on hydraulic equipment and supply of hydraulic components: valves, pumps, filters, couplings. HydPro is established in a modern workshop at CCB Ågotnes – and is well-equipped for production, piping, pressure testing and service of hydraulic equipment.

INNOVA AS

Innova AS is a leading supplier of services, equipment and solutions to the international underwater industry.

Our business idea is to combine our operational experiences and engineering skills with quality products from own portfolio and respected suppliers of equipment to the underwater industry.

Highly qualified personnel, modern design tools and an established network of reliable subcontractors, makes Innova a trusted partner for mechanical design, control system applications, data collection and hydraulic products and services.

METAS AS

Metas AS specializes in increasing understanding and protection of the world’s marine ecosystems through innovation.

Our key focus areas are: • Subsea oil and gas where we monitor subsea infrastructure for integrity and specifically for the first signs of leakage at rates as low as grams per minute over 1,000 meter range.

• Research industry where we integrate mission specific technologies in our modular X-Net deployment system to understand the marine ecosystems more thoroughly • Aquaculture where we supply environmental monitoring and intervention equipment and services to reduce costs, improve productivity and reduce the impact on the marine ecosystems surrounding the facilities.

Metas has a 10 year track record of innovation and success, supporting our mission to protect the world’s marine ecosystems and we look forward to working with our customers and partners to continue that success.

41

NEXANS NORWAY

As a global leader in advanced cabling and connectivity solutions, Nexans brings energy to life through an extensive range of best-in-class products and innovative services. For over 120 years, innovation has been the company’s hallmark, enabling Nexans to drive a safer, smarter and more efficient future together with its customers.

Nexans provides subsea cable systems on a turn key basis. We are present at every level of oil and gas production, providing a wide range of energy and telecom cables for offshore exploration, production, processing, storage and transport. We are constantly improving installation techniques, as well as trenching and burying systems for cables on the seabed. Our innovative technologies include long-length, deepwater power umbilicals to meet the rising power needs for pumps and subsea processing. Nexans also provides high-speed fiber and copper backbones for data transfer and remote control applications. For more information, visit www.nexans.com

NEODRILL

Neodrill make the construction of exploration and production wells cheaper, safer and more efficient by establishing a smarter well foundation, enabling pre-rig well construction. Our primary product, CAN® (Conductor Anchor Node) ensures that a proper well formation is in place. This removes the risks associated with uncertainties related to e.g.: bending, fatigue, load capacity and cementing quality. CAN® has been proven in 22 installations, in water depths ranging from 100 to 1500 m, to cut well construction time and costs, reduce risks and improve safety.

At UTC we will be showcasing the CAN-integrator, which facilitates early production by acting as an integrator between drilling, SPS and SURF installation operations. You can also learn about the series of patent protected solutions we’ve recently launched to improve safety, integrity and reduce the cost and footprint of subsea templates. The full suite of technology has already been licenced to Equinor and we are proud to open the door to the next generation of subsea solutions by offering our solutions to companies wishing to utilise the benefits for their own technological advances. www.neodrill.com

NOV

National Oilwell Varco (NOV) is a leading provider of technology, equipment, and services to the global energy industry.

NOV has been pioneering innovations that improve the cost-effectiveness, efficiency, safety, and environmental impact of oil and gas operations since 1862. NOV operates through three business Segments: Rig Technologies, Wellbore Technologies, and Completion & Production Solutions. NOV Completion & Production Solutions integrates technologies for well completions and oil and gas production. We design, manufacture and sell equipment and technologies needed for onshore production, and in addition, we have a rich portfolio of solutions for offshore production including floating production systems, mooring and loading systems, and subsea production technologies. From leading connectors, to disruptive subsea technologies in water treatment, storage and automated pigging, as well as subsea flexible pipe systems and integrated topside solutions, our experts apply added flexibility, and improved productivity throughout the globe.

ONESUBSEA

OneSubsea® delivers integrated solutions, products, systems and services for the subsea oil and gas market. The company offers a step change in reservoir recovery for the subsea oil and gas industry through integration and optimization of the entire production system over the life of the field.

OCEANEERING

At Oceaneering, we do things differently, creatively, and smarter. From sea to space, we transform subsea solutions to engineer the low carbon future. With the development of our next generation resident vehicles, E-ROV and Freedom, we have combined our unmatched experience, remote piloting and automated control technology, and Onshore Control Centers, to safely and cost-effectively improve efficiency and de-risk operations.

PROWELLPLAN

Are engineers data scientists, without proper tools? Isn’t the well planning process all about converting experiences into valid plans? Yes, but they have not yet been offered the tools to help them in their most time demanding and critical task.

Until today that is. Pro Well Plan provides a data-driven well planning software, with fully functioning machine learning models to aid engineers to better well planning. We are challenging the manual process which includes excel sheets, days and weeks of looking for information and a not optimal experience transfer. Instead of relying on the subjective perception of risk and best practice, extract the experience stored in more than 6000 drilled wells on the NCS in a couple of clicks and use as documentation for your well plan.

Join our stand and get to know more about data-driven well planning, how you are able to use machine learning to find relevant reference wells and how to use the entire NCS as your database!

RADØYGRUPPEN

RadøyGruppen AS have since 1969 been a solid partner in construction. We fabricate complex Subsea Production Systems including steel structures, completing assets ready for our Client`s needs. We acknowledge our Client`s requirements through our management system combined with the principles of our effective project execution model. We add competent and dedicated staff to meet our Client`s requirements. We expand our capacities at new sites enabling us to deliver even larger projects. Investing in our Client`s needs are investments in our own future, and the opportunity to deliver projects with value creation through Norwegian quality.

SIEMENS

Siemens Industries Software helps companies of all sizes around the world to transform their business and develop innovative products and services. Our customers are better equipped to respond successfully to the challenges of digitalization. Our solutions optimize their processes from planning and development through manufacturing and lifecycle support to realize innovation.

42

SHARECAT SOLUTIONS

Sharecat Solutions is provider of the business solution; SHAREcat. It is typically used for two main purposes which can be combined; 1. Securing an efficient process in making available and delivering high quality technical vendor information from the supply chain 2. Enhancement of technical vendor information related to a clients’ existing portfolio of plants or ongoing projects.

Sharecat Solutions has over the years been used to support projects and information needs in the subsea industry, and recently we have started development of a generic equipment structure solution focusing on sharing and re-using documentation and data.

SKJETNE MASKIN

Skjetne Maskin AS is a company based in Trondheim Norway that have focused on demolition and subsea shear`s.

Over the last 9 years we have delivery SH-DEEPSEA Hydraulic shear for in-depth marine operations with great success.

We also deliver grapples , poly grabs, drum cutters and specialised buckets for the subsea business. Our focus together with our companies in Europe is to be flexible to meet customers’ demands and push limits of what’s possible.

SUBSEA 7

Subsea 7 is a world-leading seabed-to-surface engineering, construction and services contractor to the offshore energy industry. We provide cost-effective technical solutions to enable the delivery of complex projects in all water depths and challenging environments. Our vision is to be acknowledged by our clients, our people and our shareholders as the leading strategic partner in our market. We focus on segments of the subsea market where we can differentiate ourselves by delivering high-quality services built around our core strengths of engineering and end-to-end project management.

Our extensive experience in deepwater Subsea, Umbilical, Riser and Flowline (SURF) and Life-of-Field projects has made us the preferred contractor and trusted partner for national and international energy companies.

SUBSEADESIGN AS

SubseaDesign AS is an engineering, design and fabrication company providing high tech. level of equipment and services for the oil and gas industry. SD offers a variety of special products including SeAlign™ misalignment connectors, diver assisted and ROV operable for all water depth. SD was in 2016 awarded the contract for delivery of all 72 off subsea Tie-in connectors 8’’ – 18’’ to Equinor on the J. Sverdrup project. SD is awarded Frame Contract with Equinor for up to 25 years, for SeAlign subsea ROV Tie-in Connection Systems, whereas call-off for the Bauge Cap-X project is signed.

Other contracts include delivery of ROV operable 8’’ – 20’’ SeAlign Tie-in connection systems for an oil major in harsh environment.Other products include Collet Connectors from small 4’’ to larger 18 ¾’’ Wellhead Connector. In conjunction with Wellhead Fatigue during drilling, SD has delivered more than 50 systems of WLR (Wellhead Load Relief) to various fields operated by Equinor, Suncor, ExxonMobil and Wintershall. Hydraulic connectors with high CV factors are available up to 15k.

TEKNISK UKEBLAD MEDIA

Teknisk Ukeblad is Norway’s leading technology and business magazine and is published with 18 issues each year.

TPCONNECTORS

TPConnectors (TPC) is a new company with a long history. Teknisk Produksjon (TP) has manufactured Compact Flanges and seal rings since 1989 and Clamp Connector hubs and seal rings since 1980. TP Connector’s vision is to unite the knowledge and experience of leaders in sales, marketing, design, development and project management of Compact Flange and Clamp Connector technology with Teknisk Produksjon’s renowned capabilities in fabrication, quality control and testing. To realise this vision, we have assembled a team of key personnel that are experienced and knowledgeable within different disciplines and can deliver connections solutions that, we hope, will exceed our clients’ expectations.

USEA

uSEA is the subsea survey company of the future. The company was founded in 2017 by oil and gas experts and world leaders in marine and underwater robotics with a clear mission: to revolutionise the way subsea survey is conducted, leveraging on the latest developments in maritime unmanned systems. Using an integrated system of autonomous underwater vehicles (AUV) and unmanned surface vessels (USV), uSEA will deliver subsea survey at a fraction of the costs, increased safety and minimised emissions.

WEATHERFORD

Weatherford is among the largest oil and gas service providers, with a global network of manufacturing, service, research and development, and training facilities in more than 90 countries. Our portfolio includes innovative solutions, technologies, and services for drilling and formation evaluation, well construction, completion and stimulation, and production. Designed to meet the evolving needs of our industry, our comprehensive service capabilities and differentiating technologies enable clients to maximize recovery, achieve or regain well integrity, and optimize production for the life of the well. For more information, visit www.weatherford.com and connect with Weatherford on LinkedIn, Facebook, Twitter and YouTube

WESTCON YARDS

Westcon Yards is a provider of high quality fabrication, maintenance and testing of subsea equipment and tools. Focusing on innovative technology to solve our customer needs, makes Westcon Yards a preferred partner for developing and delivering cost efficient subsea equipment. Westcon Yards is part of the Westcon Group, and can provide all services from our Yard facilities from South to North in Norway.

43

EXHIBITION FLOOR MAP 9

15

7

55

Stage

10

38

64

60

6

14

13

CE

63

N RA

T

EN

1 1

43

4 37

44

30 36

Dining area

5

22 223

3 2

33 Op. Hub

4

26 42

39

25 38

37

24

23

16

22 36

35

34

33

21

20

17

18

18

19 17

32

THE OPERATOR HUB 15

24 15 25

31

3 29

3

Aker BP

EXHIBITOR LIST 1

Subsea7

2

OneSubsea

3

C-Kore

34

Skjetne Maskin

17

3D at Depth Inc

35

Clamp On

GCE OCEAN

18

Radøygruppen

36

Castrol Offshore/BP Fuels

4

INNOVA

22

NOV

37

Nexans Norway

5

Metas AS

23

NOV

38

DNV GL

6

UTC YOUNG HUB

24

Oceaneering

39

Neodrill

7

Getting Down To It - 50 years of subsea success in Norway

25

Oceaneering

42

Siemens

9

TP Connectors

29

4C Solutions AS

43

Weatherford

10

Subsea Design

30

Teknisk Ukeblad

44

Sharecat Solutions

13

Blue Logic

31

Deep Ocean

14

Blue Logic

32

Equinor

15

The Operator Hub

33

Westcon Yards

44

16

MAP OF BERGEN CITY

1

5 4 6

2 3

LOCATIONS AND RECOMMENDED HOTELS 1

USF Verftet – Seminar and Icebreaker

4

Grand Hotel Terminus

2

Grieghallen – Conference venue

5

Hotel Norge by Scandic

3

Scandic Ørnen Hotel

6

Hotel Zander K

45

NOTES

46

NOTES

47

THE UTC 2019 SPONSORS & PARTNERS Main Sponsor

Main Sponsor

Main Sponsor

Main Sponsor

Sponsor Partners

Official Media Partner

Media Partner

Media Partner

Organizing Partners:

Seminar Partner

Hosted by:

UTF THANKS ALL PARTNERS FOR THEIR SUPPORT IN 2019!

The Underwater Technology Foundation (UTF) is a non-commercial entity established in 1980 when several large subsea-related companies joined forces to arrange the Underwater Technology Conference in Bergen.

The foundationâ&#x20AC;&#x2122;s goal is to promote increased knowledge of the subsea sector. This is achieved by hosting the conference and giving contributions to research and training at university level. UTF offers a grant available to applicants in need of financial support for a subsea related research or training project. The foundation would like to see more applicants for the grant, and encourages anyone with a relevant project to apply.

READ MORE ABOUT UTC 2019:

FOLLOW UTC ON SOCIAL MEDIA: LinkedIn @UTC - Underwater Technology Conference Facebook @UTCSubsea

www.utc.no 48

Twitter

@UTC_Bergen