ROBOTIC DEBURRING
TREBI Srl Unipersonale
Deburring solutions for the future Modern robotic systems must meet two requirements in particular: quick changeover and maximum costeffectiveness. In times of declining batch sizes and increasing geometry requirements, intuitive machine concepts are needed that can be easily and quickly adapted to new challenges. But a system is only as
good as the used tools. Thus, process technology is required that reacts flexibly and directly to tolerances and small burr changes and achieves a perfect deburring result. By means of customized standards, Trebi creates real profitability in close cooperation with customers and reduces investment cost to a surprising level. ‹
TREBI Srl Unipersonale, 25060 Cellatica (BS), Italy, Phone +39 30 3732317, www.trebi-bs.com, www.roboter-bearbeitung.de Hall 1, Stand 220
VIBRATORY FINISHING TECHNOLOGY
Walther Trowal GmbH & Co. KG
Gentle finishing of extremely thin work pieces With the option “gap rinsing” the new Turbotron centrifugal disk machines can now be used for finishing small to midsize, extremely thin fine blanked work pieces. They are equally suitable for deburring, edge radiusing, surface smoothing and polishing. The new machines not only help to lower the initial investment
expenses, but with their low wear rate they also contribute to significantly lower operating costs. Rinsing of the gap (interface) between spinner and wear ring prevents thin work pieces from being wedged between spinner and work bowl. This helps to avoid work piece damage and machine crashes. The gap rinsing
option now permits using these machines for processing very thin parts at much longer cycle times. At DeburringExpo Walther Trowal exhibits complete finishing systems including work piece loading & unloading as well as special functions like de-greasing/de-oiling and corrosion protection. ‹
www.ipcm.it
Walther Trowal GmbH & Co. KG, 42781 Haan, Germany, Phone +49 2129 5710, www.walther-trowal.de Hall 1, Stand 310