© Helmut Fischer
PICODENTOR® HM500 WITH AN ATOMIC FORCE MICROSCOPE: VISUALISATION AND QUANTIFICATION OF STRUCTURES WITHIN THE NANOMETRE RANGE PICODENTORR HM500 con microscopio a forza ottica: visualizzazione e quantificazione delle strutture sulla scala nanometrica Dr. Tanja Haas Dr. Bernhard Nensel Helmut Fischer GmbH tanja.haas@helmut-fischer.de bernhard.nensel@helmut-fischer.de
O
ver the last few years, the requirements of many materials in terms of their surface properties have grown considerably. Highly complex layer systems have been developed in order to achieve scratch-resistant, dirt-repellent, antistatic, reflective or storage capable surfaces. The instrumented indentation test is used to characterise the mechanical properties of these often ultra-thin layers and provides the hardness and elasticity characteristics of the layers. An accurate position measurement within the picometre range and a force generation down to as low as a few micro-newton are required for this. In order to measure the smallest of structures, the samples must also be positioned accurately (Ref. Opening photo). In order to get further information on the material properties, the
82 N. 21 - 2013 MAY/JUNE - international PAINT&COATING magazine
N
egli ultimi anni, le richieste riguardanti le proprietà di superficie dei materiali più disparati sono cresciute notevolmente. Sono stati sviluppati sistemi multistrato altamente complessi, per produrre superfici antigraffi, antimacchia, antistatiche, rifrangenti o capaci di accumulare energia. Per la caratterizzazione delle proprietà meccaniche di questi strati, spesso ultrasottili, viene adottato il controllo di penetrazione, che restituisce i valori caratteristici per la durezza o l’elasticità dei singoli strati. A questo scopo, é necessaria una misurazione precisa del percorso nella scala picometrica e una produzione di energia fino a pochi micro-newton. Inoltre, per riuscire a misurare anche le strutture più piccole, é necessario posizionare i campioni in modo esatto (rif. foto d’apertura). Per ottenere ulteriori risultati sulle proprietà dei materiali, é possibile dotare il dispositivo PICODENTORR HM500 di un microscopio a forza atomica (Atomic Force Microscope,