ICT - ZOOM ON EVENTS
DeburringEXPO: Efficient Solutions for Long-Standing and New Requirements for Component Surface Finishing
W
hether traditional or new
quality criterion in many industry sectors such
to enhance performance and extend service
manufacturing processes are
as the automobile and automotive supplier
life. Downstream processes such as joining,
involved, none of the available
industries, aerospace and aviation, machinery
sealing, coating and assembly also necessitate
technologies make it possible to produce
manufacturing, medical engineering,
burr-free and in some cases rounded edges
component surface finishes in the required
metrology, precision engineering, sensor
for various reasons. And thus for example in
quality. Process steps such as deburring,
technology and drive technology, as well
the field of sheet metal processing, deburring
rounding and cleaning, as well as targeted
as in the field of electro-mobility. “Reliable
minimises the risk of injury due to sharp
functional or decorative surface finishing,
deburring, during which extremely fine burrs
edges and reduces tooling wear for edging
are thus indispensable. Solutions by
and flash must also be removed depending
and straightening machines. © fairXperts GmbH & Co. KG
means of which these tasks can be executed reliably and economically will be presented at DeburringEXPO at the
On the other hand, good deburring and well-defined edge rounding make it possible to enhance
Karlsruhe Exhibition
painting quality at the
Centre (Germany) from
edges. “Relying solely
the 8th through the 10th
on experience gained
of October, 2019. Beyond
with previously used
this, the 3rd leading
processes for these
trade fair for deburring
tasks can quickly
technology and precision
lead to a competitive
surface finishing will
disadvantage.
provide valuable
Benchmarking is thus
know-how at its bilingual
advisable which focuses
expert forum.
central attention on searching for the most effective, reliable
Parts manufacturing is currently faced with new tasks in numerous areas.
DeburringEXPO will take place at the Karlsruhe Exhibition Centre (Germany) from the 8th through the 10th of October, 2019.
and economical technologies,” explains Hartmut Herdin.
Due to more and more complex geometries and finer structures,
on the degree of required cleanliness, is a
Companies are also being confronted with
machined, formed, primary formed, forged,
fundamental prerequisite for complying
new tasks in the area of surface finishing
sintered and moulded workpieces are
with cleanliness specifications,” explains
which result from innovative production
not only resulting in stricter requirements
Hartmut Herdin, managing director of
processes such as additive manufacturing
where actual parts production is
fairXperts GmbH & Co. KG, promoters of
(AM). The removal of residual powder and
concerned, but rather during deburring
DeburringEXPO. Furthermore, in some cases
supporting structures, as well as the rough
and surface finishing as well. The technical
surfaces are required which minimise friction,
and porous surfaces produced by these
cleanliness of components is an essential
wear and noise, and which make it possible
processes, are challenging.
204
N. 57 - MAY/JUNE 2019 - international PAINT&COATING magazine