BRAND-NEW
BENSELER Expands Downstream Processes for Zinc Flake Coating
I
efficient handling of logistics, we offer
equipped with a complex camera system
zinc flake coating value-added chain for,
our customers a complete package of
in combination with appropriate image
the BENSELER group of companies is now
corrosion protection, featuring high quality
processing software, the threaded parts
equipped with optically-automated measuring
with 0ppm error target and project-specific
can be checked for surface defects, wrench
inspection of threaded parts processes at its
solutions,” explains Kerstin Genz, Head of
width, inner and outer diameter, centricity,
Lüdenscheid location; this follows an addition
Sales at BENSELER Oberflächentechnik
and bursting, as well as the coherence
of such processes at its Markgröningen
GmbH & Co. KG, Markgröningen. “This
of chamfers and threads. The cameras
location. Since the spring of 2019, BENSELER
makes us a strong partner for our
arranged above, below, and to the side of
Oberflächentechnik NRW GmbH & Co. KG has
customers with regard to our position
the glass plates also allow a view into the
been consistently developing and expanding
in the supply chain,” adds Johan-Adriaan
threads.
the area of 100% mechanical sorting, especially
De Hek, who as Head of Production at
The two automatic roll sorting systems, in
of nuts, but also screws and more.
BENSELER Oberflächentechnik NRW GmbH
turn, enable the sorting of foreign parts
The BENSELER group of companies has tripled
is also responsible for “Automated Sorting”.
with dimensions between 3mm and
its sorting capacity at the Lüdenscheid site
In this area, BENSELER now focuses
25mm diameter. BENSELER can pack all
by expanding its “Automated Measurement
100 per cent on the sorting of nuts in
nuts identified as iO (correct) according to
Testing of Bulk Goods” division. “With this
the measurement range M6 to M16.
customer requirements and prepare them
capacity expansion and the subsequent
Using three glass plate machines, each
for shipment.
© BENSELER
n order to simplify its customer-oriented
BENSELER Oberflächentechnik NRW uses the new glass plate systems to inspect specific parts. In Lüdenscheid, it is mainly nuts that are scanned for defects by the complex camera systems.
08
N. 60 - NOVEMBER/DECEMBER 2019 - international PAINT&COATING magazine