Interdent catalogue 2010

INTERDENT® d.o.o.

SALES SI - 3000 CELJE Opekarniška cesta 26 SLOVENIA Telefon: +386 (0)3 425-62-00 Telefax: +386 (0)3 425-62-02 E-mail: info@interdent.cc PRODUCTION SI - 3342 GORNJI GRAD Dol 1a SLOVENIA Telefon: +386 (0)3 839-24-00 Telefax: +386 (0)3 839-24-15 E-mail: interdent.proizvodnja@siol.net

www.interdent.cc

CATALOGUE 2009

PRESENTATION OF THE ENTERPRISE Since its beginnings in 1978 and until today, the company Interdent has evolved from a small craft workshop into a technologically and commercially sophisticated industrial plant.

Production and sales cover approximately 4000 m2 of space.

Development and production We successfully cooperate with the Slovenian research institute JoĹžef Ĺ tefan, as well as with foreign experts to provide quality products to our customers.

The headquater of Interdent Celje, Slovenia

Quality and control With continuous improvements in production processes, control of raw input materials and finished products in our own laboratory for testing, we ensure a high quality of Interdent products, confirmed with ISO 9001 and EN ISO 13485 certificates.

Customer support We focus all of our attention on satisfying our customers. We have representatives in more than 30 countries around the world and our employees are always available to answer any questions.

Production fascilities Interdent, Gornji Grad, Slovenia

yours INTERDENT

Production of dental alloys

2

EDUCATIONAL CENTRE In our modern equipped Educational centre we are offering expert, theoretical and practical training for beginners and those who want to improve their knowledge with new technologies.

Theoretical lectures are taking place in our lecture room with the newest audio and video equipment, where 40 students can participate.

For the practical part of the course we have at hand two contemporarily equipped laboratories with 12 and 4 working places, where all materials are at disposal which help each participant in a course to test in practice all new technologies.

Workshops for stomatologists can be held in two dental offices, whereby the implant surgery is equipped with an audio - video connection to the lecture room.

Course summaries for dental technicians: • course on metal constructions – precision casting, • initial and advanced courses on metal-free ceramics, • initial, advanced and master courses on metal ceramics, • initial and advanced course on skeleton prosthesis, • initial and advanced course on combined works, • courses on individual glides, • milling technics, • Erkforom 3d - thermoforming system • Making out total prosthesis with Gelcast system, • Modelling – wax-up technique • Bio-logical setting up denture, • Anchoring in prosthetic substitutes, • Cerec In-lab MCXL CAD/CAM computer system of making constructions.

Contents of courses for stomatologists: • Implantology • Fixed prosthodontics • Composite fillings • Cementation • Prosthodontics care of endodontically treated teeth with posts • Biological teeth placement • Teeth whitening • Sterilization Courses are conducted by acknowledged home and foreign lecturers – demonstrators Authorized educational centres Vita and Sirona.

For detailed information about contents and terms please be free to call the number +386 (0)3 425 62 37 or +386 (0)3 425 62 00 ( Mrs. Urša Zagožen).

3

NOTES

4

Preparation of working models

6 - 13

Modelling

14 - 20

Duplicating, investing and casting

21 - 28

Acrylics

29 - 33

Sandblasting and finishing

34 - 38

Dental surgery accessories

39 - 42

PREPARATION OF WORKING MODELS

MODELLING

DUPLICATING, INVESTING AND CASTING

ACRYLICS

SANDBLASTING AND FINISHING

DENTAL SURGERY ACCESSORIES

PRECIOUS METAL ALLOYS

EQUIPMENT

1 2 3 4 5 6

Precious metal alloys

43

Equipment

44

5

7 8

INTERROCK New Extra hard stone Type IV ISO 6873

1

Colour: Water : powder ratio: Mixing time (manual): Mixing time (vacuum): Working time: Setting time: Setting expansion Compressive strength: Hardness:

ivory/gold-brown 20 ml water / 100 g powder 15 seconds 60 seconds ca. 5 minutes ca. 12 minutes 0.07 % after 2 h 60 MPa after 2 h 250 MPa after 24 h

Synthetic extra hard stone with high resistance. It is suitable for making working model for partial denture and fixed prosthetics work. It is a thixsotropic stone that gives very sharp, clear edges and has very smooth surface.

REF 0982 REF 0968 REF 0969 REF 0962

alu-sack 4 kg pail 5 kg pail 20 kg sack 25 kg

ivory ivory ivory ivory

REF 0981 REF 0951 REF 0952 REF 0953

alu-sack 4 kg pail 5 kg pail 20 kg sack 25 kg

gold-brown gold-brown gold-brown gold-brown

INTERSCAN Extra hard stone Type IV ISO 6873 Colour: Water : powder ratio: Mixing time (manual): Mixing time (vacuum): Working time: Setting time: Setting expansion Compressive strength: Hardness:

dark blue 20 ml water / 100 g powder 15 seconds 60 seconds ca. 5 minutes ca. 13 minutes 0.08 % after 2 h 60 MPa after 2 h 250 MPa after 24 h

Interscan is used in CAD/CAM technique. It is abrasive resistant, with low expansion and stable also by very high pressure. Special marker is included to enable laser recognition.

REF 0977 pail

3 kg

INTERSTONE New Extra hard stone Type IV ISO 6873 Colour: Water : powder ratio: Mixing time (manual): Mixing time (vacuum): Working time: Setting time: Setting expansion Compressive strength: Hardness:

sahara 23 ml water / 100 g powder 15 seconds 60 seconds ca. 5 minutes ca. 10 minutes 0.10 % after 2 h 49 MPa after 2 h 150 MPa after 24 h

Extra hard synthetic stone with good flow properties. It is suitable for making master models, individual models in fixed prosthetics and models for partial denture.

REF 0983 REF 0971 REF 0972 REF 0955

6

alu-sack 4 kg pail 5 kg pail 20 kg sack 25 kg

INTERDUR Hard stone Type III ISO 6873 Colour: Water : powder ratio: Mixing time (manual): Mixing time (vacuum): Working time: Setting time: Setting expansion Compressive strength: Hardness:

blue 26 ml water / 100 g powder 15 seconds 60 seconds ca. 4 minutes ca. 9 minutes 0.15 % after 2 h 40 MPa after 2 h 120 MPa after 24 h

High quality hard stone for production of first class prosthetic models. Its extra surface density is ideal for use in removable prosthetics. It is also recommended for antagonistic models.

REF 0956 pail REF 0958 pail REF 0957 sack

5 kg 20 kg 25 kg

BLUE STONE Type III ISO 6873 Colour: Water : powder ratio: Mixing time (manual): Mixing time (vacuum): Working time: Setting time: Setting expansion Compressive strength: Hardness:

blue 30 ml water / 100 g powder 15 seconds 60 seconds ca. 6 minutes ca. 9 minutes 0.20 % after 2 h 30 MPa after 2 h 80 MPa after 24 h

Synthetic hard quality multipurpose stone. It is suitable for making master models in total prosthetics work, situations models, base crown (secondary) part of crown and bridge die stone model. The high flow characteristics ensure accurate reproduction of all details from the impression.

REF 0973 pail REF 0974 pail REF 0965 sack

5 kg 20 kg 25 kg

YELLOW STONE Type III ISO 6873 Colour: Water : powder ratio: Mixing time (manual): Mixing time (vacuum): Working time: Setting time: Setting expansion Compressive strength: Hardness:

yellow 30 ml water / 100 g powder 15 seconds 60 seconds ca. 6 minutes ca. 9 minutes 0.20 % after 2 h 30 MPa after 2 h 80 MPa after 24 h

Synthetic hard quality multipurpose stone. It is suitable for making master models in total prosthetics work, situations models, base crown (secondary) part of crown and bridge die stone model. The high flow characteristics ensure accurate reproduction of all details from the impression.

REF 0975 pail REF 0976 pail REF 0966 sack

7

5 kg 20 kg 25 kg

1

ARTIPLASTER ISO 6873

1

Colour: Water : powder ratio: Mixing time (manual): Mixing time (vacuum): Working time: Setting time: Setting expansion Compressive strength: Hardness:

white 30 ml water / 100 g powder 15 seconds 60 seconds ca. 2 minutes ca. 3,5 minutes 0.03 % after 2 h 21 MPa after 2 h 60 MPa after 24 h

Gnathology requires special stones for articulating, whereby expansion ratio is of extreme importance. After eight days the expansion ratio of ARTIPLASTER is limited to expansion 0.03%.

REF 0959 pail REF 0961 pail

INDIVIDUAL ARTICULATOR OF MIDDLE VALUE

5 kg 20 kg

FACE ARCH

• set up possibility • incline of Condil way 10o-60o • incline by Benet 0o-20o • weight 540g REF 81030 Addition • mounting plate • plastic loadstar- Calotte • magnet Splitcast system • matrix Splitcast system • adapter • socle for biting spoon

• face arch complete • recorder • face arch bag

REF 81035 REF 81065 REF 81070 REF 81062 REF 81060 REF 81059

REF 81057

OCCLUDATORS

PACKAGE FOR PLASTER MODELS

REF 3401 occludator small REF 3402 occludator large

Package for plaster prosthetic models is used for protecting plaster models from damage during sending or carrying.

REF 0730

Package for plaster prosthetic models

1pcs for 3 models

ALABASTER Colour: Water : powder ratio: Working time: Setting time: Setting expansion Compressive strength: Hardness:

white 50 ml water / 100 g powder ca. 4-5 minutes ca. 9,5 minutes 0.20 % 16 MPa after 2 h 20 MPa after 24 h

A general purpose dental plaster for use in normal investing technique prior to acrylic processing.

REF 6624 sack

8

25 kg

150 150 150 The hardness of Interdent stones and plasters after 24 hours in MPa

120 120 120

In chart you can see the hardness of Interdent stones and plasters.

1

80 80 80

250 250

60 60 60

200 150 150 120

20 20 20

100

80 60

50 20 0

MPa MPa MPaMPa

Interrock New, Interscan Interdur Artiplaster

Interrock New, Interscan Interrock New, Interrock New, Interscan Interscan Interdur Interdur Interdur Artiplaster Artiplaster Artiplaster

Exact copy of all details and very smooth surface.

9

Interstone New Blue/Yellowstone Alabaster

Interstone New New Interstone Interstone New Blue/Yellowstone Blue/Yellowstone Blue/Yellowstone Alabaster Alabaster Alabaster

SMALL PATTERN SAW WITH SPARE BLADES Saw frame is made of spring-hardened stainless material. Blade replacement is quick and simple. Two sizes of saw blade with blade thickness of 0.25 mm.

1

REF 0335 REF 0356

pattern saw with spare blade pattern saw bended with spare blade

SPARE BLADES (thickness 0.25mm): REF 0336 3 mm 3 pcs REF 0336-10 3 mm 10 pcs REF 03361 5 mm 3 pcs REF 03361-10 5 mm 10 pcs

RETAINING RINGS Used to provide retention between primary and secondary plaster model.

REF 0305 REF 0305T

retaining rings retaining rings

100 pcs 1000 pcs

DOWEL PINS, DOWEL PINS FIXATOR, POINTED DOWEL PINS Pointed dowel pins REF 0298 REF 0298T REF 0299 REF 0299T REF 0300 REF 0300T

dowel pins L (large) dowel pins L (large) dowel pins M (medium) dowel pins M (medium) dowel pins S (small) dowel pins S (small)

100 pcs 1000 pcs 100 pcs 1000 pcs 100 pcs 1000 pcs

Dowel pins and dowel pins fixator REF 0301 REF 0301T REF 0302 REF 0302T REF 0303 REF 0303T REF 0304

dowel pins L (large) dowel pins L (large) dowel pins M (medium) dowel pins M (medium) dowel pins S (small) dowel pins S (small) dowel pins fixator

Dowel pins are made of brass in three sizes.

10

100 pcs 1000 pcs 100 pcs 1000 pcs 100 pcs 1000 pcs 20 pcs

TWIN PINS Twin pins assure good fixation of dies in working models, especially in the tight space conditions.

Sleeve assures stability of the pin also after frequent removing of the pin.

Possible multiple use while twin pins do not oxidize.

Especially suitable for using in milling technique.

Rubber protects sleeves from stone during the production of secondary part of the model.

REF 0317 Twin pins sleeves rubbers

100 pcs 100 pcs 100 pcs

RAPID ADHESIVE Accurate and tight sealing of dry and clean broken stone fragments and fissures.

11

REF 0414 thin 30-100 mPa路s

10 g

REF 0416 thick 30-100 mPa路s

20 g

1

EASY Form System

1

7

6

2 3

1 4 5

SIMPLE, FAST, ECONOMICAL, PRECISE • • •

•

•

• •

•

• • •

•

simple use, saving material and time, precise results of work; time saving because of single phase work system; enough space for faceting and modeling of vestibular sections of a tooth; when plastering into the articulator, the magnets provide fast and precise assembly; solid fixation of particular segments enables simple milling phases (dismantled individual plaster segments); model may easily be sliced to particular segments; conical notches enable precise placement of objects back into the model and retain them tightly; the object is free from rotating, contacts between teeth and the object position are always precise; only one type of stone is used; reduced consumption of stone; no need for dowel pins, retention rings, ring placement accessories and insulation material; moulds are so cheap that a dentist may discard it after use.

EASY-Form starter kit

REF 1600 4 pcs moulds (1)

2 pcs wedges (2)

2 pcs screws with magnet (3)

2 pcs plates for articulator (4)

2 pcs fixing screws (5)

1 pcs ejecting screw (6)

1 pcs Interfilm (REF 0412) (7) REF 1601 EASY-Form mould kit

Contents: 24 pcs moulds REF 1602 EASY-Form wedge

Contents: 4 pcs wedges REF 1603 EASY-Form screw with magnet

Contents: 12 pcs screws for magnet REF 1604 EASY-Form plates for articulator

Contents: 4 pcs plates for articulator REF 1605 EASY-Form fixing screws

Contents: 4 pcs fixing screws REF 1606 EASY-Form ejecting screw

Contents: 1 pcs ejecting screw REF 0412 Interfilm 200 ml (look at page 16 for details)

12

EASY-Form System - instructions for use: INSULATION: First insulate all plastic parts with Interfilm. Remove excessive insulation agent by means of air. Thin coat of Interfilm should suffice.

1

SYSTEM ASSEMBLY (Fig. 1) Join the articulation plate with the magnet no. 3, mould no. 2 and the wedge no. 1 consecutively as illustrated on the picture, and tighten all parts with a screw.

PREPARATION OF IMPRESSION (Fig. 2) Cut off the excess material in the vestibular, lingual or palatal sides.

RELINING (Fig. 3) When making the upper jaw model, the wedge should be embedded in plasteline, silicone or wax.

This may also serve for fixing the impression tray.

STONE (Fig. 4) Approximately 70-100 g of stone must be mixed for the fabrication of one model. Setting expansion of stone must not exceed 0.1%. We recommend thixotrophic, super hard stone, like Interrock New and Interstone New. FOUNDING (CASTING) The impression and the Easy-Form are placed upon the vibrator and filled with stone.

Important: the fixing wedge must not be covered with stone for more than 5 mm towards the oral part, so that it may later be extracted.

CAST REMOVAL (Fig. 5) Once the stone is hardened, the impression and the tightening screw are removed. Articulation plate with the magnet should also be removed.

2

3

1

4

2

7

3

8

4

9

5

10

6

11

13

EXTRACTION OF MODEL (Fig. 7,8,9) Tightening screw should be replaced by the extraction screw. Tightening the extraction screw results in uplifting the stone model. In case the stone model is difficult to extract, the extraction screw should be loosened and distal parts of the stone model pressed with thumbs from below. The wedge is removed by pulling it in distal direction.

TREATMENT OF THE STONE MODEL (Fig. 10,11) The excess stone is removed from the model by help of the stone cutter, and notches are marked with saw.

Useful tip: first cut is done with the saw manually, then the diamond separating disc is used.

Important: stone model should be cut to several segments, depending on the setting expansion of the stone. This reduces the tension within the model.

Each stone segment may not exceed the size of 4 cm.

REASSEMBLY OF PARTICULAR SEGMENTS: Place the magnetic screw into the plate and arrange particular stone segments according to their symbols. Individual segments are fixed by the wedge. The accuracy of distributed segments may be controlled by means of the control outline upon the wedge.

PLACEMENT INTO THE ARTICULATOR To place the model into the articulator simply bring the articulation plate and the mould with the stone model together (Split-CastSystem).

Important: Easy - Form components may not be heated over 600 oC, nor splashed with boiling water.

1

THERMOTOP

THERMOTOP SET REF 0600 Thermotop Set consists of:

Simple temperature regulation.

Consistency of dipping wax and lining thickness is determined by temperature setting, melting period is 15 minutes, with wax temperature tolerance of ± 4 oC.

REF 0601 REF 0412 REF 0411 REF 0241

Thermotop Interfilm spacing varnish dipping wax 50 g

Properties: Height: 91 mm Diameter (Ø): 60 mm Voltage: 220 - 240 V, 50/60 Hz Power at 220 V: 22 W Temperature: 100 oC Pot volume: 40 ml Weight: 500 g

2

REF 0601 Thermotop

DIPPING WAX Interdent's dipping wax - new quality is very plastic with high elastic memory and has minimal possible contraction during transition from liquid to solid state.

Recommended working temperature: 75 - 85 °C. REF 0241 dipping wax REF 0241-200 dipping wax

50 g 200 g

SPACING VARNISH, THINNER Spacing varnish Special varnish for individual stone dies, resistant to any insulating agent.

It is hard, mechanically resistant and dries rapidly. Single layer thickness (depending on the type): 10-16 µ REF 0380 REF 0381 REF 0382 REF 0411

spacing varnish, silver spacing varnish gold spacing varnish red spacing varnish silver

13-16 µ 13-16 µ 10-13 µ 8-10 µ

16 ml 16 ml 16 ml 20 ml

Spacing varnish thinner Used to determine perfect density of spacing varnish, and for cleaning of individual stone dies and brushes.

REF 0383 spacing varnish thinner 30 ml REF 0410 spacing varnish thinner 20 ml (use with REF 0411)

INTERFOIL SYSTEM Quick, simple and precise copying fabrication. Advisable in milling techniques and bigger constructions - bridges.

REF 0400

14

Interfoil kit

Contents of the kit: REF 0401 Interfoil 0.60 mm Ø 42 mm REF 0402 Interfoil 0.10 mm Ø 42 mm REF 0403 plasticine pot REF 0334 foil pincer

100 pcs 200 pcs 1 pcs 1 pcs

REF 0401M Interfoil 0.60 mm, soft, Ø 42 mm

100 pcs

MODELLING WAXES FOR CROWNS AND BRIDGES CORRECTIVE WAX Corrective wax has high dropping point. It is used for corrections of stone models and for blocking out undercuts. It is harder quality and very opaq white colour. It does not burn out without residues and it is in no way suitable for waxing up.

Before making a cap with dipping method, the space varnish must be used over the corrective wax to prevent reaction between it and dipping wax.

REF 0194-30

white colour

2

30 g

MODELLING WAX

OCCLUSAL WAX

High-quality wax for modelling crowns and bridges. Ideal scraping properties, rapid hardening and it burns withouth residue.

Harder modelling wax, ideal for modelling of occlusal surfaces in C+B technique. The opaque wax is extremely easy to apply and is not sticky.

It can be used for milling and it burns without residue.

REF 0232-30 REF 0232-70

REF 0286-30 REF 0286-70 REF 0288-30 REF 0288-70

blue colour blue colour

ivory colour ivory colour oker colour oker colour

30 g 70 g

REF 0282-30 REF 0282-70 REF 0284-30 REF 0284-70

turkis colour turkis colour grey-blue colour grey-blue colour

30 g 70 g 30 g 70 g

30 g 70 g 30 g 70 g

GNATHOLOGICAL SET OF WAXES

»BLOCK OUT« WAX

Set of four different coloured waxes for gnathological modelling

Wax for blocking out undercuts of stone models and for model analysing when producing partial denture. High dropping point of 86 °C makes wax usable also when duplicating with thermo-reversible duplicating material.

REF 0200

REF 0186-30

15

pink-red colour 30 g

MILLING WAX

UNIVERSAL WAX

Milling wax is used for modelling crowns in milling technique. Easy to mill, does not smear and is perfect for all milling work.

Universal wax is a high quality wax, made of microwaxes and vegetal waxes, opaq hell grey colour. Its thick consistence enables use of wax carver.

When scratching technique is used, the surface is shiny and smooth. It is very suitable for milling, while it does not stick to the bur and the milled shoulder is perfectly smooth. Wax's hard quality and small inner tensions assure precise work.

REF 0240-30 REF 0240-70

green colour 30 g green colour 70 g

REF 0195-30 REF 0195-70

grey colour grey colour

30 g 70 g

2

INTERFILM Thin coat renders excellent insulation of individual dies in dipping technique. Also separates wax from stone and wax from metal.

REF 0412 Interfilm 200 ml REF 0431 Interfilm 1000 ml

WAX SEMI-PRODUCTS

17 – 14

REF 0249 wax girlands for ceramics REF 0251 wax constructions for ceramics sizes:

A, B, C, in frontal sector A, B, C, in distal sector

12 – 22

24 – 27

C

C

B

B

A

A

A

A

B

B

C

C

The assortment contains 6 shapes in 3 sizes of 5 pieces each, 90 pieces in total. A refill package contains 10 pieces.

47 – 44

Use order form for ordering refill packages.

16

42 – 32

34 – 37

WAX SEMI-PRODUCTS REF 0248 REF 0248/shape

wax pontics for ceramics refill pack

The assortment contains 54 shapes of 5 wax pontics made of blue wax.

Refill package contains 20 pieces Use order form for ordering refill packages.

2 17/16

13

12

11

21

22

23

26/27

prem

C

C

B

B

A

A

A

A

B

B

C

C 47/46

45

44

43

33

34

35

36/37

front

WAX SEMI-PRODUCTS

WAX WIRE IN ROLL

Used for fabrication of single-sided casting structures with little corrections and adjustments to antagonistic occlusion surfaces. They also provide ergonomic work to the dental technicians in manufacturing of construcions for composite/resign layering.

Flexible, tension free wax wire in roll is used for making sprue canals. The blue is middle hard and the green is hard quality.

REF 0244 facetted pontics 120 pontics REF 0245 facetted coats 120 coats

REF 0252 REF 0253 REF 0254 REF 0255 REF 0256 REF 0257

blue/middle hard

Contents: 250 g

17

green/hard wax wire 2.5 mm wax wire 3.0 mm wax wire 3.5 mm wax wire 4.0 mm wax wire 4.5 mm wax wire 5.0 mm

REF 0292 REF 0293 REF 0294 REF 0295 REF 0296 REF 0297

THERMO KNIFE Mechanically regulated temperature in range 30°C - 250°C. The temperature is constant all the time during work.

It is possible to use 10 different tips. There are 4 tips delivered with Thermo knife (REF 0606, REF 0607, REF 0608, REF 0609). It is suitable for use in dental laboratory and in goldsmith’s production REF 0605 Thermo knife with 4 tips

REF 0606

2

REF 0615

REF 0608

REF 0607

REF 0610

REF 0609

REF 0612

REF 0611

REF 0613

REF 0614

WAX CENTER Wax center is dipping pot and Thermo knife in one piece. Dipping pot has mechanically regulated temperature in range with accuracy ±3 °C. Waxing up sound has also mechanically regulated temperature in range 30°C 250°C. The temperature is constant all the time during work. It is possible to use the same tips as for Thermo knife. Specially suitable for laboratory with two working places.

REF 0604 Wax center with 2 holders

RETENTION PEARLS Diameters 0.4 and 0.6 mm.

Used for facetting with resin material. During the application care has to be taken to spread the adhesive in fine layer in order to glue the pearls to the wax structure without dipping them into the adhesive. Pearls are applied individually, with wax carver.

REF 0370 REF 0371 REF 0372 REF 0373

retention pearls 0.40 mm retention pearls 0.60 mm pearl adhesive adhesive thinner

15 g 15 g 10 ml 10 ml

PREPARATION WAX Pink, transparent and flexible wax. It can be well adapted to the master model. Suitable for casted partial dentures, before duplication of models.

Dimension: 120x80mm Colour: pink-transparent REF 0239 preparation wax soft 0.60 mm REF 0290 preparation wax soft 0.70 mm REF 0242 preparation wax hard 0.60 mm Contents: 15 sheets

18

CASTING WAX - STIPPLED AND SMOOTH

CASTING WAX STICKS AND PROFILES

Good adaptation on a model and does not tear because of good plastic properties.

Wax sheets 125x75 mm. Colour: green - transparent

Wide choice of diameters offers adequate selection. Optimal mixture of natural waxes provides solid texture of the sticks, necessary for easy laboratory work.

REF 0234 REF 0235 REF 0236 REF 0237 REF 0238

wax foil - stippled wax foil - stippled wax foil - stippled wax foil - stippled wax foil - stippled

Smooth - soft: REF 0225 REF 0226 REF 0227 REF 0228 REF 0229

wax foil wax foil wax foil wax foil wax foil

REF 0201 REF 0202 REF 0203 REF 0204 REF 0205 REF 0206 REF 0207 REF 0208 REF 0209 REF 0210 REF 0211 REF 0212 REF 0213 REF 0214 REF 0215

0.25 mm 0.30 mm 0.40 mm 0.50 mm 0.60 mm

0.35 mm 0.40 mm 0.45 mm 0.50 mm 0.60 mm Smooth - hard REF 0188 REF 0189 REF 0190 REF 0191 REF 0192

Contents: 15 sheets

0.7 mm 0.8 mm 0.9 mm 1.0 mm 1.1 mm 1.2 mm 1.3 mm 1.5 mm 2.0 mm 2.5 mm 3.0 mm 3.5 mm 4.0 mm 4.5 mm 5.0 mm

25 g 25 g 25 g 35 g 35 g 35 g 35 g 50 g 50 g 70 g 75 g 80 g 95 g 95 g 95 g

REF 0216 REF 0217 REF 0218 REF 0219 REF 0220 REF 0221 REF 0222 REF 0223 REF 0224

1.8 mm 2.2 mm 3.0 mm 3.5 mm 4.0 mm 1.8x1.3 mm 4x1.75 mm 4.1x2.1 mm 6.5x2.5 mm

50 g 50 g 70 g 70 g 70 g 25 g 65 g 65 g 70 g

MODELLING WAX For modelling of denture bases and formation of biting edges. Flexible and stable, almost temperature-shrink free.

BASE PLATES

base plates grey (8 upper, 4 lower) base plates grey 100 pcs upper base plates grey 100 pcs lower

REF 0710 REF 07085 REF 07086

base plates pink (8 upper, 4 lower) base plates pink 100 pcs upper base plates pink 100 pcs lower

thickness 1.5 mm thickness 1.2 mm thickness 1.5 mm thickness 1.2 mm thickness 1.5 mm

REF 0250

Wax stick, round, pink, diameter 5 mm, for feeding and draining canals in the acrylic systems like IVO-CAP System.

300 g 300 g 500 g 500 g 500 g extra hard

UTILITY WAX

Made of shellac, resistant to deformation and well adaptable to plaster models.

REF 0708 REF 07083 REF 07084

REF 0231 REF 02311 REF 02312 REF 02313 REF 0187

Utility wax is used for protecting and preserving the peripheral roll in removable prosthetics. The application of utility wax on the impression tray allows a perfect transfer of the peripheral roll from the impression onto the model. The wax is pliable at room temperature and can be used without pre-heating.

Contents: 15 kos REF 0185

19

2

WAX BITING EDGES

2

REF 0230 REF 0262 REF 0278 REF 0260 REF 0274 REF 0264

wax biting edges, hard, arched, red wax biting edges, middle, arched, pink wax biting edges, middle, arched, red wax biting edges, arched, soft pink wax biting edges, soft, arched, yellow wax biting edges, ultrasoft, arched, yellow

50 pcs 50 pcs 50 pcs 50 pcs 50 pcs 50 pcs

REF 0258 REF 0261 REF 0279 REF 0259 REF 0275 REF 0263

wax biting edges, hard, straight, red wax biting edges, middle, straight, pink wax biting edges, middle, straight, red wax biting edges, straight, soft pink wax biting edges, soft, straight, yellow wax biting edges, ultrasoft, straight, yellow

50 pcs 50 pcs 50 pcs 50 pcs 50 pcs 50 pcs

REF 0265 REF 0266 REF 0280 REF 0267 REF 0276 REF 0268

wax biting edges, hard, arched, red wax biting edges, middle, arched, pink wax biting edges, middle, arched, red wax biting edges, arched, soft pink wax biting edges, soft, arched, yellow wax biting edges, ultrasoft, arched, yellow

100 pcs 100 pcs 100 pcs 100 pcs 100 pcs 100 pcs

REF 0269 REF 0270 REF 0281 REF 0271 REF 0277 REF 0272

wax biting edges, hard, straight, red wax biting edges, middle, straight, pink wax biting edges, middle, straight, red wax biting edges, straight, soft pink wax biting edges, soft, straight, yellow wax biting edges, ultrasoft, straight, yellow

100 pcs 100 pcs 100 pcs 100 pcs 100 pcs 100 pcs

CERVICAL WAX High quality wax for modelling of cervical parts of crowns.

REF 0233-30 REF 0233-70

red colour red colour

Cervical wax purple is a little bit harder wax with higher dropping point, suitable for milled crowns and hot climate areas.

30 g 70 g

REF 0291-30 REF 0291-70

purple colour purple colour

30 g 70 g

Dropping point: 59oC Dropping point: 64oC

STICKY WAX Comes in shape of blocks or sticks. High adhesive capacity, smear-free.

Used for temporary sealing of metal, acrylic or stone particles.

REF 0239-70 REF 02391

20

wax adhesive in blocks wax adhesive in sticks

70 g 100 g

INTERDUPLICAST

GELODOUBLE

Reversible duplicating material used for partial denture, combination work and also suitable for acrylic casting technique. It can be used for 15-20 cycles. With Gelodouble duplicating material is possible to achieve high degree of reproduction accuracy even for smallest details because it is elastic, resistant to tearing and has no shrinkage. Container should be tightly closed and stored at room temperature.

Addition-curing two component silicon with low viscosity for duplicating models in dental laboratories.

A and B components have the same viscosity.

1. compatible with stone and phosphate materials 2. models are easily removed 3. extremely precise and dimension stable 4. high elasticity

Colour: Hardness (shore):

blue - transparent ca. 20 Shore

REF 0920 Gelodouble REF 0944 Gelodouble

pail pail

REF 0917 A+B REF 0918 A+B REF 0919 A+B

MODELHART

1+1 kg 5+5 kg 10+10 kg

Solvent based dipping hardener for hardening phosphate based investment material for partial dentures when duplicating in gel. Very good hardening properties for better precise further work.

The tin should be closed very tightly.

EKOHART Environment friendly water based dipping hardener for hardening phosphate based investment material for partial dentures when duplicating in gel. 99% biologically degradable. Very good hardening properties for better precise further work.

REF 0947 bottle

6 kg 2.5 kg

REF 0940 tin 1000 ml

1000 ml

MODEL HOLDER Is used for dipping the model in Modelhart or Ekohart. Its shape enables to pour out redundant hardener REF 0942 model holder

MODELHART SPRAY Is used for spraying the model when duplicating in silicone. It hardens the model and make the wax to adapt better.

REF 0941 spray

INTERLAYER MG

250 ml

Interlayer MG, fine phosphate based investment, for use in Cobalt - Chrome partial denture technique. It assures smooth surface of metal after casting.

REF 0939 bottle

21

180 g

3

INTERCAST LTS

3

INTERVEST K+B SPEED

A fine - grained phosphate bonded graphite-free investment, suitable for all types of alloys. For speed and conventional heating method. It has long working time and good flowing properties. Surface of metal construction is smooth after casting. Expansion is easily controled with expansion liquid Expasol. It can be used also without casting ring.

Gypsum based, graphite-free speed investment for casting precious and Ag-Pd alloys. It is mixed with destilled water. It is easy to deflask and casted object can be cleaned with brush in water.

Warning: It must not come in contact with phosphate based investments.

Use of separate mixing vessels and spoons is recommended.

REF 0930 Dose

REF 0935 Box

41 sacks รก 160 g (6.56 kg)

4 kg

MODELCAST

EXPASOL

Phosphate bonded, graphite-free investment used for partial dentures. It can be duplicated in silicone or gel material. It has good flowing properties, long working time and give precise cast. It becomes softer when cooling down and is easy to take the cast out. Expansion is easily controled with expansion liquid Expasol.

Expasol is universal expansion liquid for investment material INTERVEST K&B SPEED and MODELCAST. Frost sensitive.

REF 0933 Box

REF 0937 bottle REF 0938 bottle

30 sacks รก 400 g (12.00 kg)

22

1l 5l

INTERWAXIT

MARKER NOVĂ?

Cleans greasy wax surfaces and looses surface tension upon the waxing structure.

REF 0413 REF 0432

bottle bottle

200 ml 1000 ml

Is used for marking casting ring before putting it in the furnace. The mark stay visible after preheating, because it contents incombustible material.

REF 0342

Marker NovĂ˝

3 METAL CASTING RINGS, RUBBER CASTING RING SOCLE, FURNACE TONGS

Standard casting ring sizes with long life, made of stainless, fireproof material, tightly fitting into the rubber casting ring socle.

REF 0363 REF 0364 REF 0365 REF 0366

size size size size

1x 3x 6x 9x

REF 0700 universal rubber casting ring socle REF 3391D REF 3391

Furnace tongs 50 cm Furnace tongs 40 cm

METAL CASTING RING LINERS

Maintains spacing, allows expansion of investment material and provides precise castings. Retains its dimensions even at high temperatures. Made of Al2O3. Health friendly.

REF 0108 REF 0108-30

23

casting ring liners in rolls casting ring liners in rolls

Contents: 10 m Contents: 30 m

DEGETHERM PREHEATING FURNACE Degetherm microprocessor-controlled preheating furnaces for crowns, bridges and partial dentures.

• Microprocessor-controlled temperature regulation with digital display • Maximum preheating temperature is 1200oC. • Maximum capacity of the mould compartment:

• Degetherm lab4 (for 4 metal casting rings)

• Degetherm lab6 (for 6 metal casting rings)

• Degetherm lab9 (for 9 metal casting rings) • Number of programs: 8 factory-registered + up to 16 individual programs can be set.

• 1 to 3 level of holding temperature • Program heating rate, linear heating rate: 1 to 20oC in minute.

• Possibility of setting desired date and time of closing the programm Technical data:

3

DEGETHERM

lab4

lab6

lab9

REF

0673

0674

0675

Height (mm)

500

520

540

Width (mm)

380

420

450

Depth (mm)

340

380

430

Height (mm)

110

130

150

Width (mm)

150

200

250

Depth (mm)

150

200

230

Mould chamber Rated voltage

Power at rated voltage

230V; 50Hz 2.1kW

2.6kW

Weight

3.0kW

1200oC

Max. temperature 28kg

32kg

35kg

DEGETHERM EASY PREHEATING FURNACE Technical data are the same as with Degetherm preheating furnace. Final temperature, heating rate and linear of heating rate can be set.

Saving the programs is not possible.

DEGETHERM EASY

Easy4

Easy6

Easy9

REF

0670

0671

0672

24

I-BOND 02 Base metal alloy for porcelain to metal restorations.

I-BOND 02 is a biocompatible non-precious nickel chrome based alloy.

I-BOND 02 contains no beryllium and fulfills the recommendations of the standard DIN 13912 for nonprecious alloys and DIN EN ISO 9693 for alloys intended for porcelain to metal restorations. The low Vicker´s hardness of 180 (HV 10) leads to good and easy milling and grinding behaviour and gives perfect polished surfaces.

REF 1700 REF 1701

1000 g 500 g

REF 1702 REF 1713

250 g 100 g

Composition Properties: (Mass-%):

Ni Cr Mo

65 22.6 9.6

Nb Si Fe Ce

1,0 1,0 0.5 0.3

Density Melting range Casting temperature Vickers hardness HV 10 Coefficient of thermal expansion 25 - 500 °C 20 - 600 °C Yield stress Rp 0.2 Modulus of elasticity E Elongation A5

8.2 g/cm3 1250-1310°C 1420°C 180 13.9 x 10-6K-1 14,0 x 10-6K-1 330 MPa ca. 205000 MPa 25%

I-BOND NF Cobalt-Chrome-Alloy for porcelain to metal restorations.

I-Bond NF is a biocompatible non-precious cobalt chrome based alloy.

I-Bond NF contains no nickel and beryllium and fulfills the recommendations of the standard DIN 13912 for nonprecious alloys and DIN EN ISO 9693 for alloys intended for porcelain fused to metal restorations. Alloy is easy to mill and grind. It gives perfect polished surfaces.

REF 1703 REF 1704

1000 g 500 g

REF 1705 250 g REF 1714 100 g

Composition Properties: (Mass-%):

Co Cr W

63 24 8

Mo Si Nb

3 1.0 1.0

Density Melting range Casting temperature Vickers hardness HV 10 Coefficient of thermal expansion 25 - 500 °C 20 - 600 °C Yield stress Rp 0.2 Modulus of elasticity E Elongation A5

8.3 g/cm3 1304-1369°C 1480°C 285 13.9 x 10-6K-1 14,0 x 10-6K-1 550 MPa ca. 210000 MPa 10%

I-MG Alloy for partial denture base.

I-MG is biocompatible Co-Cr-Mo (without Beryllium and Nickel) partial denture alloy. It has outstanding resistance to corrosion and high strenght.

I-MG can be well polished and laser welded. It meets the DIN EN ISO 68711 standard.

REF 1706 1000 g REF 1707 500 g REF 1708 250 g Composition Properties: (Mass-%):

Co Cr Mo Si Mn C N

62.5 29.5 5.5 1.4 0.6 0.3 0.2

25

Density Melting range Casting temperature Vickers hardness Tensile Strength Yield stress Modulus of elasticity Elongation

HV 10 Rm Rp 0.2 E A5

8.2 g/cm3 1295-1345°C 1460°C 365 960 MPa 640 MPa ca. 220000 MPa 7.5%

3

I-MG FH Alloy for partial denture base with intensified flexibility I-MG FH is a biocompatible Co-Cr-Mo based alloy for partial dentures, containing no nickel or beryllium. In addition to high flexibility and strength, which make it suitable for combined work, the alloy also possesses outstanding resistance to corrosion. I-MG FH can be well polished and laser welded. It meets the DIN EN ISO 6871-1 standards.

REF 1709 REF 1710 REF 1711

1000g 500g 250g

Composition Properties: (Mass-%):

3

Co Cr Mo

62.5 30.0 5.0

Si Mn C

1.0 1.0 0.5

Density Melting range Casting temperature Vickers hardness Tensile Strength Yield stress Modulus of elasticity Elongation

HV 10 Rm Rp 0.2 E A5

8.2 g/cm3 1230-1320°C 1430°C 370 (HV 10) 920 MPa 620 MPa ca. 220.000 MPa 4.5%

INTERSOLDER

I-WELD

Rods for soldering Co-Cr alloys used with soldering paste Interflux, Ø2mm.

Co-Cr wire for laser soldering, thickness 0.5mm.

Soldering temperature: 1235 oC Melting Interval: 1140-1220 oC

Composition: Co: 64%, Cr: 28.5%, Mo: 6%, Si: 1%, Mn: 0.5%, Ni < 0.05%

Composition: Co: 62%, Cr: 29.5%, Mo: 4.5%, Si: 3%, B: 0.2%, C: 0.3%, Mn: 0.5%

REF 0497 2 m

REF 0495 5 g

INTERFLUX

ELEKTROLYT MG

Paste for soldering Co-Cr and Ni-Cr alloys.

Liquid for electrolytic polishing of Co-Cr alloys.

REF 0496 80 g

REF 0490 1000 ml

26

HERCULES

High technology for fatigue free work and perfect results • Variable spot size 0.3 - 2.0 mm • Individually adjustable laser pulse parameters • Air blow-off-nozzle integrated into welding chamber to protect and cool down the weld • LYNX Stereo-Dynascope is a microscope without eyepieces offering excellent resolution and high image contrast • Fatigue-free work due to freedom of head and body movement results in enhanced work performance and fewer errors • Extremely enlarged beam path in comparison to normal stereo microscope, resulting in great radial and axial degree of freedom of the head position • Wearing glasses or contact lenses does not hamper work at all • Adjustable manipulation openings for individual adaptation to seat height and preferred working position • Optional Leica microscope REF 0640 Laser option Lynx REF 0641 Laser option Leica microscope Unit has a CE sign.

Ergonomical design and high technology for perfect results

Technical data

Hercules

Laser Type

Nd:YAG

Wave length

1064 nm

Pulse energy

50 juls

Pulse length

0.5 - 2.0 ms

Mean power

50 W

Peak power min.

8 kW

Spot size

adjustable from 0.3 to 2.0mm in 0.1mm steps

Microscope

LYNX, alternatively: Leica microscope

Sighting device

Dynascope with reticle, additionally 2 crossed sighting light diodes

Optional Leica microscope

27

3

GRAPHITE RETORTS AND INSERTS For melting of precious dental alloys in reduced atmosphere.

1 2

1

REF 0425 graphite retort for Hereaus CLG 2002 10 pcs

2

REF 0421 graphite retort for Degussa, ZC

10 pcs

3

REF 0422 graphite retort for Hereaus CLG

10 pcs

4

REF 0423 graphite insert for Bego Fornax

6 pcs

5

REF 0427 graphite insert for Izodent

6 pcs

3 5

4

MELTING CRUCIBLES

3

For melting of non-precious and precious dental alloys.

1

5

2

6

3

4

7

8

1

REF 0437 Krupp Globucast Table Castomat

6 pcs

2

REF 0436 Krupp Globucast 2000

6 pcs

3

REF 0435 Bego Fornax

6 pcs

4

REF 0446 Manfredi

6 pcs

5

REF 0447 Bego, open flame

1 pcs

6

REF 0444 Degussa, open flame

1 pcs

7

REF 0443 Izodent

6 pcs

8

REF 0426 Manfredi with graphite

6 pcs

INTERCAST 60 Casting machine for centrifugal casting with inductive high frequency metal melting. Design for casting Co-Cr, Ni-cr and precious alloys.

An autonomus water cooling.

REF 0660

Technical Data Power supply Max. Power consumption Min. alloy quantity in the crucible Max. alloy quantity in the crucible Crucible material Crucible material when casting precious alloys Max. Time for full melting of 30g alloy Cooling HF power rating adjustment when melting Ni-Cr-Co alloys or precious alloys motor acceleration adjustment Dimensions W/D/H Weight

28

220V ~ +/-10% / 50Hz 3kW 7g 80g ceramics ceramics with graphite insertion 60s closed system, water, autonomous manual manual 620/660/1060mm 120kg

LOWER LINGUAL BARS Anatomic shape, arched, in three sizes, with fabricated retention.

Contents: 10 pcs REF 0324 7 cm REF 0325 8 cm REF 0326 9 cm

CLASP WIRE Round in diameter, made of stainless, spring hardened steel for orthodontic and prosthetic purposes.

Retains its shape and does not break.

REF 0306 Ø 0.6 mm 3 m

REF 0306-40 Ø 0.6 mm

40 m

REF 0307 Ø 0.7 mm 3 m

REF 0307-30 Ø 0.7 mm

30 m

REF 0308 Ø 0.8 mm 3 m

REF 0308-20 Ø 0.8 mm

20 m

REF 0309 Ø 0.9 mm 3 m

REF 0309-10 Ø 0.9 mm

10 m

REF 0310 Ø 1.0 mm

3 m

REF 0310-10 Ø 1.0 mm

10 m

REF 0311 Ø 1.1 mm

3 m

REF 0311-10 Ø 1.1 mm

10 m

REF 0312 Ø 1.2 mm

3 m

REF 0312-10 Ø 1.2 mm

10 m

REINFORCING NET

DENTURE FLASK

Gold plated net, 0.4 mm thick, improves adhesion of acrylics and reinforces dental base.

Four piece set, made of brass. Convenient shape for easy disassembling and removal of stone. To be used in hydraulic press. Interior space can accomodate larger models.

REF 0352 reinforcing net REF 0337 denture flask

29

4

FLASK CARRIER

INTERACRYL HOT

Acrylic resin for rapid heat-curing procedure.

Interacryl Hot is a heat-curing, cadmium-free, methyl methacrylate-based artificial material, supplied in form of polymer (powder) and monomer (liquid).

In compliance with the international standard ISO 1567.

Made of stainless steel. Used for simple handling of flasks in and out of the water and for rinsing of wax from flasks.

4

Indications: - full dentures - partial dentures

REF 3372 flask carrier stainless steel

REF 1500

Interacryl Hot - basic set, colour 10

Contents of the set: REF 1504 Interacryl Hot - powder, colour 10 REF 1506 Interacryl Hot - liquid REF 0391 Isoacryl red REF 1540 measuring beaker REF 1539 measuring vessel for powder REF 1543 flat brush REF 1544 silicone vessel REF HWN 260-15 mixing spoon

ISOACRYL

1000 g 750 ml 200 ml

REF 1501 Interacryl Hot - basic set, colour 3 Contents of the set: REF 1505 Interacryl Hot - powder, colour 3 REF 1506 Interacryl Hot - liquid REF 0391 Isoacryl red REF 1540 measuring beaker REF 1539 measuring vessel for powder REF 1543 flat brush REF 1544 silicone vessel REF HWN 260-15 mixing spoon REF 1502 Interacryl Hot - powder-liquid set, colour 10 Contents of the set: powder 1000g and liquid 750 ml REF 1503 Interacryl Hot - powder-liquid set, colour 3 Contents of the set: powder 1000g and liquid 750 ml Insulation liquid on alginate base, used for separating of stone from acrylics and stone from stone. Dries rapidly, drip-proof, leaves very fine coat on the stone.

REF 0409 REF 0391

blue red

200 ml 200 ml

REF 0390 REF 0392

blue red

500 ml 500 ml

REF 1560 Interacryl Hot set transparent Contents of the set: powder 1000g and liquid 750 ml colour 3 = pink transparent colour 10 = pink transparent with veins

30

1000 g 750 ml 200 ml

INTERACRYL CAST Acrylic for pouring technique.

Interacryl Cast is self-curing cadmium-free methyl methacrylate based artificial material, supplied as polymer (powder) and monomer (liquid).

In compliance with the international standard ISO 1567.

Indications: - completion of casted partial removable dentures - relining of dentures - extension of dentures - pouring technique in prosthetics (f.e. Gelcast system)

colour 3 = pink transparent colour 10 = pink transparent with veins

GELCAST SYSTEM

REF 1515 Interacryl Cast - set, colour 10 Contents of the set: REF 1517 Interacryl Cast - powder, colour 10 REF 1519 Interacryl Cast - liquid

350 g 250 ml

REF 1516 Interacryl Cast - set, colour 3 Contents of the set: REF 1518 Interacryl Cast - powder, colour 3 REF 1519 Interacryl Cast - liquid

350 g 250 ml

REF 1548 REF 1549 REF 1550

1000 g 1000 g 750 ml

Interacryl Cast - powder, colour 10 Interacryl Cast - powder, colour 3 Interacryl Cast - liquid

Used for making upper and lower total prosthesis with acrylic pouring technique.

REF 0945 Gelcast set (Interacryl Cast, colour 10) REF 0946 Gelcast set (Interacryl Cast, colour 3) Set contents: REF 0929 REF 0923 REF 0922 REF 0920 REF 1515

Gelcast flask canal cutter teeth holder Gelodouble 6 kg Interacryl Cast set colour 10 (350 g + 250 ml) or REF 1516 Interacryl Cast set colour 3 (350 g + 250 ml)

POLYMERISATION UNIT Equipped with pressure gauge, air valve, safety valve and relief valve. Used for polymerisation of self-curing acrylics â&#x20AC;&#x201C; Interacryl Cold, Interacryl Ortho, Interacryl Cast and Interacryl Plast.

Specifications: Contents: Max. pressure: REF 0603

31

5l 2.5bar/55oC

4

INTERACRYL COLD

INTERACRYL ORTHO

Acrylic for denture repairs.

Interacryl Cold is a self-curing, cadmium-free, methyl methacrylated based artificial material, supplied as polymer (powder) and monomer (liquid).

Interacryl Cold complies with the international standard ISO 1567.

Acrylic material for orthodontics.

Interacryl Ortho is a cold-curing, cadmium-free, methyl methacrylated polymer (powder) and monomer (liquid).

Interacryl Ortho complies with the international standard ISO 1567.

Indications: - repair of full and partial dentures - relining of dentures - extension of dentures

4

REF 1507 Interacryl Cold - set, colour 10 Contents of the set: REF 1511 Interacryl Cold - powder, colour 10 REF 1514 Interacryl Cold - liquid REF 1508 Interacryl Cold - set, colour 3 Contents of the set: REF 1512 Interacryl Cold - powder, colour 3 REF 1514 Interacryl Cold - liquid

Indications: - orthodontic appliances Powder is transparent.

Colours of liquid: transparent, pink, red, blue, green, yellow.

100 g 75 ml

100 g 75 ml

REF 1509 REF 1510 REF 1513

Interacryl Cold - powder, colour 10 Interacryl Cold - powder, colour 3 Interacryl Cold - liquid

350 g 350 g 250 ml

REF 1545 REF 1546 REF 1547 REF 1562

Interacryl Cold - powder, colour 10 Interacryl Cold - powder, colour 3 Interacryl Cold - liquid Interacryl Cold - powder, transparent

1000 g 1000 g 750 ml 350 g

colour 3 = pink transparent colour 10 = pink transparent with veins

REF 1525 INTERACRYL ORTHO - set Contents of the set: REF 1526 Interacryl Ortho - powder REF 1533 Interacryl Ortho - liquid, transparent REF 1534 Interacryl Ortho - liquid, pink REF 1535 Interacryl Ortho - liquid, red REF 1536 Interacryl Ortho - liquid, blue REF 1537 Interacryl Ortho - liquid, green REF 1538 Interacryl Ortho - liquid, yellow REF 1541 sprayer REF 1542 pipette

1000 g 75 ml 75 ml 75 ml 75 ml 75 ml 75 ml

REF 1527 REF 1528 REF 1529 REF 1530 REF 1531 REF 1532

500 ml 500 ml 500 ml 500 ml 500 ml 500 ml

Interacryl Ortho - liquid, transparent Interacryl Ortho - liquid, pink Interacryl Ortho - liquid, red Interacryl Ortho - liquid, blue Interacryl Ortho - liquid, green Interacryl Ortho - liquid, yellow

INTERACRYL PLAST Acrylic material for individual impression trays.

Interacryl Plast is a cold-curing artificial cadmium-free methyl methacrylate based artificial material, supplied as polymer (powder) and monomer (liquid).

Interacryl Plast is easy to model and stick-free. Yellow colour provides fair contrast to the impression materials.

In compliance with the international standard ISO 1567.

Indications: - fabrication of individual impression trays.

REF 1520

Interacryl Plast - set

Contents of the set: REF 1522 Interacryl Plast - powder REF 1524 Interacryl Plast - liquid

32

1000 g 250 ml

INTERLUX

LC INTERTRAY

Light polymerized tray polymerizes under UV light in wavelength of 350 - 400 nm and halogen light in wavelength of 420 - 480 nm.

REF 0714 upper

large

50 pcs

Interlux is suitable for polymerization of light-polymerized materials which polymerize in wavelength of 350 - 400 nm.

Technical data: Dimension: 255(l) x 219(w) x 100(h) Voltage: 230 V / 50 Hz Power: 36 W REF 0715

INTERLABOSIL

Interlux

4 FLASK CLAMP - INOX

Interlabosil C-silicon system has been developed specifically for use in dental laboratory. It is recommended for over cast when finishing partial dentures with acrylics, for protection of teeth by heat polimerisation of acrylic dentures, can be used for precise bite registration. No separating liquid is required when the material is in direct contact with acrylic resin.

Colour light grey Mixing ratio 100 g putty / 2 g catalist Mixing time 30 sek Working time 1.3 min Setting time 5 min Shore hardness(24 hours) 95 sh.A Linear retraction (24 hours) 0.2 %

Simple use, for one or two flasks. Flasks with clamps are inserted into the press.

REF 0338 clamp for one flask, stainless steel REF 3382 clamp for two flasks, stainless steel

REF 0925 REF 0926 REF 0928 REF 0927

33

Interlabosil Interlabosil Interlabosil Interlabosil catalyst in paste

1.5 kg 4 kg 10 kg 40 g

CUTTING / SEPARATING / GRINDING DISCS AND HEATLESS STONES

5

CUTTING/SEPARATING DISCS REF 0357 22x0.2 mm REF 0357-100 22x0.2 mm

20 pcs 100 pcs

REF 0362 REF 0362-100 REF 0367 REF 0367-100 REF 0389 REF 0389-100

25x0.7 mm 25x0.7 mm 22x0.6 mm 22x0.6 mm 22x0.38 mm 22x0.38 mm

20 pcs 100 pcs 20 pcs 100 pcs 20 pcs 100 pcs

CUTTING DISCS: REF 0359 REF 0359-100 REF 0361 REF 0361-100 REF 0368 REF 0368-100 REF 0369 REF 0369-100 REF 0374 REF 0374-100 REF 0375 REF 0375-100

35x0.7 mm 35x0.7 mm 37x1.0 mm 37x1.0 mm 32x1.0 mm 32x1.0 mm 35x1.0 mm 35x1.0 mm 40x0.6 mm 40x0.6 mm 40x1.0 mm 40x1.0 mm

20 pcs 100 pcs 20 pcs 100 pcs 20 pcs 100 pcs 20 pcs 100 pcs 20 pcs 100 pcs 20 pcs 100 pcs

CUTTING DISCS REINFORCED: REF 0358 40x1 mm

GRINDING DISCS: REF 0360 REF 0360-100 REF 0376 REF 0376-100 REF 0377 REF 0377-100 REF 0378 REF 0378-100 REF 0379

22x3.0 mm 22x3.0 mm 32x1.6 mm 32x1.6 mm 32x2.2 mm 32x2.2 mm 35x1.7 mm 35x1.7 mm 35x3 mm

20 pcs 100 pcs 20 pcs 100 pcs 20 pcs 100 pcs 20 pcs 100 pcs 20 pcs

HEATLESS-SPECIAL: REF 0463 19 x 2 mm REF 0464 19 x 3 mm REF 0465 19 x 4 mm REF 0466 22 x 2 mm REF 0467 22 x 3 mm REF 0468 22 x 4 mm REF 0469 16 x 2 mm for Dentists REF 0470 16 x 3 mm for Dentists REF 0471 16 x 4 mm for Dentists Pack/50 pcs

20 pcs

GOLD BOX

MICRO ADJUSTABLE PEGS FOR CERAMICS

Box used for collecting chips of precious alloys during treating the cast.

REF 06044 REF 06045

REF 0550 Gold box

34

for molar for premolar

6 pcs with 4 pins 8 pcs with 2 pins

ROTATING GLASS PLATE FOR MIXING CERAMICS

INTERCERAMIC

The stone-ceramics insulating agent prevents the ceramics from sticking onto the stone die during the application of ceramics. Since it is not greasy, it does not cause any problems in the burning process.

Rotating glass plate for mixing different kinds of ceramic powders and colours.

Plastic cover protects ceramic powders against drying.

REF 0502 rotating glass plate

REF 0397 15 ml

CERAMIC SET REF 0690 Ceramic Set Contents: • Glass spatula • Separating file • Modelling insturment • Modelling instrument • Agate spatula • Separator

• Pean curved • Brush for smoothing ceramic • Brush 1 for ceramic, Kolinsky • Brush 4 for ceramic, Kolinsky • Brush 8 for ceramic, Kolinsky • Brush for opaquer

BRUSHES FOR CERAMIC NATURAL NATURAL – FINEST SABLE WITH COVER – (BRUSHES No. 8 and 9 FINEST SABLE ALSO POSSIBLE Brush is made of best quality of Sibirien WITH BALL) marten hairs which are very elastic.

Brush is made from natural hair – sable. Due to their good Brush tips are shaped as fine as a needle water storage the brush hair cater the right water consistency and have good absorption properties. of the ceramic work.

Handle form assure excellent hold.

NATURAL - KOLINSKY

SYNTHETIC

REF

5

N4171-00 N4171-0 N4171-1 N4171-2 N4171-3 N4171-4 N4171-5 N4171-6

REF

REF

K4130-0

REF

S41-0

K4130-1

S4191-4

S41-1

K4130-4

S4191-6

S41-4

N4171-10

K4130-6

S4191-8K

S41-6

N4171-12

K4130-8

S4191-9K

S41-8

N4171-7 N4171-8

BRUSH FOR ISOLATING LIQUIDS REF A06-C BRUSH FOR SMOOTHING CERAMIC REF A01

BRUSH FOR OPAQUER

BRUSH FOR WAX

REF SB32-F0

REF A06-V

35

INTERALOX Snow white, high quality pure corundum (99,96 % Al2O3), for sandblasting of precious and non-precious alloy casts and ceramics.

REF 0404 REF 0399 REF 0405 REF 0406

Interalox Interalox Interalox Interalox

250 µ 150 µ 110 µ 50 µ

Interalox Interalox Interalox Interalox

250 µ 150 µ 110 µ 50 µ

Contents: 7 kg REF 04041 REF 03991 REF 04051 REF 04061 Contents: 28 kg

GLASS PEARLS Glass pearls are intended to be used for oxide sand-blasting in the inner crown parts after ceramic firing, for fitting secondary telescopes and for sand-blasting fire-resistant material at pressed ceramic works.

REF 0479 glass pearls REF 0480 glass pearls

50 µ 150 µ

Contents: 7 kg

5 PUMICE Volcanic rock, neatly cleaned, perfect for polishing of acrylics in dental prosthetics.

REF 0407 pail REF 0408 pail

36

4 kg 14 kg

POLISHING PASTE FOR METAL

POLISHING PASTE FOR ACRYLICS

High quality polishing paste for dry pre-polish and polishing of diverse dental alloys.

REF 0462 universal polishing paste Unilesk

REF 0456 REF 0457 REF 0458 REF 0459 REF 0460

polishing paste for pre-polish of Ag-Pd alloys polishing paste for pre-polish of Au-alloys polishing paste for high gloss of Ag-Pd alloys polishing paste for high gloss of Au-alloys polishing paste for Cr-Co-Mo alloys

100 g

160 g 165 g 160 g 160 g 170 g

POLISHING FELTS 1 2 3 4 5 6 1

2

3

5

REF 0813 REF 08121 REF 0812 REF 0811 REF 0815 REF 0814

felt cone felt cone felt cone felt cone felt wheel felt lens

50 x 25 mm 50 x 20 mm 40 x 20 mm 30 x 15 mm 50 x 10 mm 50 x 10 mm

4

5

6

BRUSHES FOR POLISHING MACHINE 1

2

Made of natural, environment-friendly materials, with wooden core.

3

1 2 3 4 5

4

5

37

REF 0804 REF 0807 REF 0808 REF 0802 REF 0801 REF 0800

deerskin polishing brush - 7 layers felt wheel Ø70 mm - 4 layers felt wheel Ø70 mm - 6 layers cotton polishing brush horsehair polishing brush Ø80 mm - triple fold horsehair polishing brush Ø50 mm - single fold

POLISHING SET FOR COMPOSITE REF 0830

Polishing set for composite

HP leather brush Ø12 HP bristle white Ø15 HP bristle black Ø15 HP leather Ø19 -5 HP goat hair white Ø17 HP goat hair grey Ø17 HP goat hair (pencil) HP polisher wheel HP polisher cone

1 pcs 1 pcs 1 pcs 1 pcs 1 pcs 1 pcs 1 pcs 2 pcs 2 pcs

BRUSHES FOR MICROMOTOR 1 REF 0809 2 REF 0817 1

2

deerskin polishing brush, Ø25 mm, for handpiece - 5 layers deerskin polishing brush, Ø25 mm - 5 layers, unmounted 3 REF 0816 felt wheel brush, Ø21 x 3 mm, unmounted 4 REF 8101 felt wheel brush, Ø21 x 3 mm, for handpiece 5 REF 0803 drill cleaning brass brush thin REF 0803D drill cleaning brass brush thick 6 REF 0810 felt wheel brush, Ø25 mm, for handpiece - 3 layers 7 REF 0805 brass brush Ø23 mm, for handpiece REF 0818 horsehair brush Ø23 mm, for handpiece 8 REF 0806 horsehair hard brush, oval, for handpiece 8 REF 0819 cotton, Ø23 mm, for handpiece

4

3

5 5

6

7

8

9

EMERY CLOTH IN ROLL REF 0820 REF 0821 REF 0822 REF 0823

emery clothemery clothemery clothemery cloth-

Contents: 50 m

38

120 abrasive 180 abrasive 280 abrasive 400 abrasive

ARTICULATING PAPER

ARTICULATING FOIL

ARTICULATING PAPERS 80 micrones

ARTICULATING FOIL 8 micrones

Used for determining occlusion and articulation disturbances of natural teeth or prosthetic appliances in dental surgeries and laboratories.

Single-sided fine foil for use in dental surgeries and laboratories, in two different widths and four colours.

REF 0100 REF 0101 REF 0102 REF 0103 REF 1001 REF 1002

REF 0099 REF 0991 REF 0992 REF 0993

2 cm, red 2 cm, blue 2 cm, green 2 cm, black

10 m 10 m 10 m 10 m

REF 0099-30 REF 0991-30 REF 0992-30 REF 0993-30

2 cm, red 2 cm, blue 2 cm, green 2 cm, black

30 m 30 m 30 m 30 m

REF 0994 REF 0995 REF 0996 REF 0997

7 cm, red 7 cm, blue 7 cm, green 7 cm, black

10 m 10 m 10 m 10 m

REF 0994-30 REF 0995-30 REF 0996-30 REF 0997-30

7 cm, red 7 cm, blue 7 cm, green 7 cm, black

30 m 30 m 30 m 30 m

articulating paper, blue, 12 pads of 10 sheets articulating paper horseshoe, blue, 6 pads of 10 sheets articulating paper, blue-red, 12 pads of 10 sheets articulating paper horseshoe, blue-red, 6 pads of 10 sheets articulating paper, red, 12 pads of 10 sheets articulating paper horseshoe, red, 6 pads of 10 sheets

OCCLUSION SPRAY

MODELING WAX - EXTRA HARD

For marking the contact points on prosthetic items on the master model in dental laboratory and finished prosthetic works in dental surgery.

Colour pigment film easy to dose, completely removable with water. According to examinations based on the German LSG (food law), material is nontoxic.

REF 092 REF 093

red green

75 ml 75 ml The wax is hard and breakable at room temperature but soft and adapted at the temperature above 40째C. It is suitable for taking bite registration and also for waxing - up in removable prosthetic, especially in warm places.

REF 0187 thickness 1.5 mm

500 g

WAX HORSESHOE FOR BITE REGISTRATION Reinforced with gauze from entirely natural wax.

REF 0243 wax horseshoe for bite registration Contents: 20 horseshoes

39

6

ABRASIVE AND POLISHING STRIPS

GLASS PLATE

Used for polishing and smoothing mesial filings.

For cement mixing.

Dimensions: 11 x 7.5 cm

REF 4193 green REF 4194 blue REF 4195 white

30 µ 40 µ 60 µ

10 m roll 10 m roll 10 m roll

REF 0500 thickness 0.8 cm REF 0501 thickness 0.4 cm

MATRIX 1 REF 03201 ivory matrix, small 2 REF 03211 ivory matrix, molar 3 REF 0321 ivory matrix, premolar 4 REF 0320 ivory matrix, molar Thickness: 0.035 mm Contents: 12 pcs 5 REF 03154 ribbon matrix 6 REF 0315 ribbon matrix 7 REF 03146 ribbon matrix roll 8 REF 0314 ribbon matrix Thickness: 0.035 mm Contents: 25 pcs

7

4 mm 5 mm 6 mm (10 m lenght) 7 mm

1

5

2

6

3

8

Polyester matrix used for the formation of superior dental arch fillings.

9

9 REF 0451 10 REF 0420 REF 0452

4

10

polyester matrix 6 x 80 mm polyester matrix 8 x 80 mm polyester matrix 10 x 80 mm

Contents: 100 pcs

6

INTERDENTAL WEDGES Perfect as a protective buffer for wedging of interdental papilla and alignment of matrix towards the point of contact. Made of hard wood and painted with permanent and harmless colours.

REF 0115 REF 0116 REF 0117 REF 0118 REF 0119 REF 0120 REF 0121

Interdental wooden wedges, set Interdental wooden wedges, orange 1 Interdental wooden wedges, yellow 2 Interdental wooden wedges, red 3 Interdental wooden wedges, blue 4 Interdental wooden wedges, green 5 Interdental wooden wedges, white 6

Contents: 100 pcs

40

ALGINATE REMOVER Efficiently removes the remains of alginate from impression trays, containers and mixing spatulas.

REF 0418 alginate remover Contents: 700 g

WAX PINS

ROOT POSTS

Extremely adaptable, cone-shaped, in four sizes, with metal needle for easy registration of root canal impression.

Made of stainless steel, cone-shaped. Used for fabrication of custom crowns and bridges.

REF 0246 30 various wax pins and 10 metal needles

REF 0323 5 pcs of small + 5 pcs of large root posts

INLAY WAX Natural wax for making impression of roots. Elastic, middle hard wax with dropping point 57oC contains no inorganic material and burns out without residues.

REF 02392 Inlay wax

24 pcs

6

41

SALIVA EJECTORS

DENTAL ROLLS

The INTERDENT saliva ejectors can be adapted to any type of aspirator.

The special characteristics of the metallic centre ensure a safe and stable form.

The special finish on the filter part give it a complete rounded shape, withouth any sharp surfaces, while it also decreases the sucking up of the mucous membrane, thus making sure that the patient will suffer no irritation or pain.

They are made of very good absorb material, white colour, 35 mm lenght and 11 mm diameter. They can be sterilized.

REF 0709 saliva ejectors transparent Contents: 100 pcs

REF 0721 dental rolls cellulose 250 g

15 cm lenght

SURGICAL WIRE FOR CAMBA BLOCK Soft surgical wire for fixation of broken jaw.

6

REF 0313 REF 0313-30

0.4 mm 0.4 mm

3m 30 m

REF 0316 REF 0316-30

0.5 mm 0.5 mm

3m 30 m

THERMO PLATE Mechanically regulated temperature in range 30 °C - 60 °C with accuracy ±0.5 °C. Heating plate is made of PTFE material, that prevent adhering wax to plate. It is suitable for use in dental praxis for heating wax horseshoes for bite registration and for dental laboratories, for heating foils, modeling wax, biting edges.

REF 0616 Thermo plate

42

INTERPAL Cu 12,0%

DIN EN ISO 22674 Precious alloy, containing 5 % of gold for casting teeth coatings and bridgework of all types. It contains 0.1 % of Iridium which forms a thin microstructure, facilitates treating and polishing of the surface and improves alloy’s corrosion resistance and resistance to overheating when casting.

REF 902

1g Cu 12,0%

Zn 1,0%

Au 5,0%

Pd 23,0%

Zn 1,0%

Au 5,0% Ag 59,0%

Properties: Colour Type Melting range Vickers Hardness (HV 5/30) Yield strength Rp 0,2% (MPa) Elongation (%) Softening Hardening Pre-heating temperature Casting temperature Heating after melting Density Investment material Solder

white Pd 23,0% 5 1020-940°C s: 120 h: 230 c: 200 s: 310 h: 650 c: 600 s: 17 h: 11 c: 13 15 min. at 950°C / quench in water 15 min. at 600°C / air 750°C (30-12°C at end temperature, corresponding to muffle size) 1200°C (Graphite crucible resp. at open flame with ceramic crucible) electric: 20-30s inductive: 5-10s flame: 5-10s 10.8 g/cm3 Intercast LTS or Intervest K+B Speed.

Universal solder 770

Au 5,0% Ag 59,0% Pd 23,0% Cu 12,0% Zn 1,0% Ag 59,0%

s=soft, h=hardened, c=hardness after casting

INTERPAL SE Zn 1,0%

DIN EN ISO 22674

Cu 7,9%

Au 2,0% Pd 25,0%

Precious alloy, containing 2 % of gold for casting teeth coatings and bridgework of all types. It contains 0.1 % of Iridium which forms a thin microstructure, facilitates treating and polishing of the surface and improves alloy’s corrosion resistance and resistance to overheating when casting.

REF 902SE

1g

Zn 1,0% Cu 7,9%

Ag 64,0% Au 2,0% Pd 25,0%

Properties: Colour Type Melting range Vickers Hardness (HV 5/30) Yield strength Rp 0,2% (MPa) Elongation (%) Softening Hardening Pre-heating temperature Casting temperature Heating after melting Density Investment material Solder

white 3 975-1050°C Ag 64,0% s: 120 h: 235 c: 180 s: 235 h: 485 c: 320 s: 20 h: 13 c: 15 15 min. at 750°C / quench in water 15 min. at 400°C / air 750°C (30-12°C at end temperature, corresponding to muffle size) 1175°C (Graphite crucible resp. at open flame with ceramic crucible) electric: 20-30s inductive: 5-10s flame: 15-20s 10.9 g/cm3 Intercast LTS or Intervest K+B Speed.

Universal solder 770

s=soft, h=hardened, c=hardness after casting

43

Au 2,0% Pd 25,0% Ag 64,0% Cu 7,9% Zn 1,0%

7

MOBILE DENTAL LABORATORY LAMP Ergonomic dental laboratory lamp with possibility to regulate the height (distance) and direction of lightness. It assures 97% of approximate spectrum of day lightness and it lights up working surface with 4200 lux (distance of lightness source 50 cm). It can be mounted also on existing working bench. It lightened the working surface of dental technician very equally.

Lamp includes two plug boxes for small units, which are positioned on working bench.

REF 0650 REF 0650L

mobile dental laboratory lamp - post left mobile dental laboratory lamp - post right

DENTAL LABORATORY WORKTABLE Design and tehnical characteristics are followig the highest requests of working procedures and ergonomy in dental laboratory. It is made of standard elements, which suits different dimensions and constructions in space.

There are some advantages: Working plate For different circumstances • Ultrapas • Mediapan • Beech • Kerrock (Composite) Front side and outside plates MDF plate, each side varnished in 3-layers, thickness 16 mm Inside plates and the bottom Panel-plate, 120 g foil, thickness 18 mm.

Socle Could be made of mediapan loaded with rubber or Kerrock or protected natural wood.

Back side MDF plate, each side varnished in 3-layers, thickness 16 mm.

Drawers Varnished in 3-layers, each drawer runs inaudibly on ball-bearing rails.

Metal parts Three-dimensional, regulated metal hinge.

Varnishing 3-layers, 1st layer polyester, 2nd and 3rd layer polyurethane, resistant to cleaning and disinfecting agent and mechanical damages.

Colours Individual upon RAL colour scale

8

Handles Metal or artificial material (composite)

Single worktable TM 1, working table made of varnished beech.

Working place for one technician with gas and air-installation .

Ecology No material contents formaldehydes.

44

Contents PREPARATION OF WORKING MODELS Interrock New Interscan Interstone New Interdur Blue Stone Yellow Stone Gnathostone

6 - 13

6 6 6 7 7 7 8

Articulator Face Arc Occludators Package for plaster models Alabaster Pattern saw Spare saw blades

14 14 14 14 14 14 14 14 14 14 14 15 15

EUK Modelling wax Occlusion wax Gnathological set of waxes “Block out” wax Milling wax Universal wax Interfilm Wax semi products Pontics/coats Wax wire in roll Thermo knife Wax center Retention pearls

8 8 8 8 8 10 10

Retention rings 10 Dowel pins / Pointed dowel pins 10 Dowel pins fixator 10 Twin pins 11 Rapid adhesive 11 Easy Form system 12,13

MODELLING Thermotop Thermotop Sortiment Dipping wax Spacing varnish Spacing varnish thinner Interfoil system Interfoil 0.60 mm Interfoil soft 0.60 mm Interfoil 0.10 mm Plasticine pot Foil pincers Corrective wax Modelling wax

14 - 20 15 15 15 15 16 16 16 16, 17 17 17 18 18 18

Glue for pearl Preparation wax Smooth and stippled wax Casting wax sticks Casting wax profiles Modeling wax pink Base plates Utility wax Wax bitting edges Cervikal wax Sticky wax

DUPLICATING, CASTING AND INVESTING Interduplicast silicon Gelodouble Ekohart Modelhart spray Modelhart Interlayer MG Intercast LTS Intervest K+B speed Modelcast Expasol

21 21 21 21 21 21 22 22 22 22

21 - 28

Interwaxit Marker Nový Casting rings Casting ring socle Casting ring tongs Degetherm Preheating Furnace Degetherm Easy Preheating Furnace I-Bond 02 I-Bond NF I-MG

23 23 23 23 23 24 24 25 25 25

I-MG FH Intersolder I-weld Interflux Elektrolyt MG Laser Hercules Graphite retorts Melting crucibles Intercast 60

ACRYLICS Lower lingual bars Clasp wire Reinforcing net Denture flask Flask carrier Isoacryl

26 26 26 26 26 27 28 28 28

29- 33 29 29 29 29 30 30

Interacryl Hot Interacryl Cast Gelcast system Polymerisation unit Interacryl Cold Interacryl Ortho

30 31 31 31 32 32

Interacryl Plast Interlux LC intertray Interlabosil Flask clamp - inox

SANDBLASTING AND FINISHING Cutting and separating discs 34 Gold box 34 Micro adjustable pegs for ceramic 34 Rotating glass plate for mixing porcelain 35 Interceramic 35 Ceramic set 35 Brushes for ceramic 35

Articulating paper 39 Articulating foil 39 Occlusion spray 39 Modeling wax extra hard 39 Wax horseshoe for bite registration 39 Abrasive finishing strips 40

32 33 33 33 33

34 - 38 Brush for opaquer Brush for isolating liquids Brush for wax Interalox - sand Glass pearls Pumice Polishing pastes for metal

35 35 35 36 36 36 37

Polishing pastes for acryli Polishing felts Brushes for polishing machine Composite polishing set Brushes for micromotor Emery cloth in roll

DENTAL SURGERY ACCESSORIES

37 37 37 38 38 38

38 - 42

Poliester matrix Ivory Matrix Glass plate Interdental wedges Alginate remover Wax pins

PRECIOUS METAL ALLOYS Interpal Interpal SE

18 18 19 19 19 19 19 19 20 20 20

40 40 40 40 41 41

Root posts Inlay wax Saliva ejectors Dental rolls Surgical wire for camba block Thermo plate

41 41 42 42 42 42

43

43 43

EQUIPMENT

44

Removable dental laboratory lamp 44 Dental laboratory worktable 44

45