Timing Tools - BMW BMW Flywheel Holder 0XAT0303A - Introduction: Special design to fix flywheel when replacing timing chain To release & tighten the central bolts on vibration damper - Application: BMW : 47T2/M47TU/M57T2/M57TU/M67/N45/N45T/ N46/N46T/N51/N52/N53/N54/W17
BMW & Mercedes Benz Extractor Set 0XAT1894 - Introduction: Puller for Injection Pump Tool Kit Applicable for BMW 4 cylinder diesel engine (M41), 6 cylinder diesel engine - 2.5 (M51) also for Opel/Vauxhall Omega 2.5 TD. To loosen the injection pump pulley from the shaft when dismounting the injection pump. Injection Pump Extractor Tool Kit To lock the injection pump sprock in position and press out the injection pump shaft. This tool is required when removing the injection pump. Note: Only item 1 is used on M47 engine. Item 1 and 2 are both used on M47TU, M57 and M57TU engines. Mercedes Benz Guide Rail Pin Puller Can remove even the most stubborn pins from the cylinder head, unlike the short slide hammer previously used to attempt this job. This puller incorporates a thrust bearing to ease the pulling action. The overall length is 85 mm which allows it to fit into those tight problem area.
Injection Pump Extractor Tool Kit For BMW 0XAT1441 - Introduction: This tool requires when removing the injection pump. To lock the injection pump sprocket in position and to press out the injection pump shaft. - Application: BMW M47, M47TU, M57, M57TU engines Note: only item 1 is used on M47 engine. Item 1 and 2 are both used on M47TU, M57 and M57TU engines.
Crankshaft Rotating Tool For BMW M52, M54, M56 0XAT1738 Application: BMW: 325, 330, 335, 525, 530, 535, 730 Engine Code: 2.5D: M57N256D2 3.0D: M57306D3, M57306D4, M57306D5, M57D30A, M57N206D3, M57N2306D3, M57N306D2, M57N306D3, M57N306D5, N57N306D2, N57N306D3
45