Uvekol™ S 15
Technical Data Sheet 1/5
GENERAL DESCRIPTION Uvekol S 15 is a one-component acrylic resin for the lamination of glass systems. It is cured under UV light for 20 minutes. The Uvekol S 15 interlayer produces glass laminates with excellent impact resistance. Uvekol S 15 can be applied with nearly all kinds of glas: flat and bent, tempered, coated and other types of glass.
PHYSICAL PROPERTIES The data below are typical values.
Refractive Index - 25°C Colour Viscosity Höpler - 25°C Density Shore A hardness after cure - 21°C
Apha mPa.s g / cm³ -
1.4410 < 50 75 0.998 70
APPLICATION PROCEDURE The lamination of glass with Uvekol resins is a simple application process, it requires no heating or pressure. The glass panes to be laminated are cleaned and joined together with a double-sided adhesive tape, leaving a small opening. Uvekol S 15 is pumped into the cavity between the panes and then the resin is cured in an UV oven for 20 minutes (standard time for most laminating applications). Detailed information about the application procedure is available in the Uvekol User’s Guide: Instructions for the production of Uvekol laminated glazing units.
Surface Specialties S.A./N.V. Anderlechtstraat 33, B-1620, Drogenbos, Belgium Telephone: ++32 (0)2 334 51 11
E-mail: tsd.radcure@cytec.com
Web Site: www.surfacespecialties.com
Disclaimer: Surface Specialties S.A./N.V. or any of its affiliated companies (hereinafter “Surface Specialties”) decline any liability with respect to the use made by any third party of the information contained herein. The information contained herein represents Surface Specialties’ best knowledge thereon without constituting any express or implied guarantee or warranty of any kind (including, but not limited to, regarding the accuracy, the completeness or relevance of the data set out herein). Surface Specialties is the sole owner or authorized user of the intellectual property rights relating to the information communicated. The information relating to the use of the products is given for information purposes only. No guarantee or warranty is provided that the product is adapted to the client’s specific use. The client should perform its own tests to determine the suitability for a particular purpose. The final choice of use of a product remains the sole responsibility of the client. TM trademark of Surface Specialties Group.